Commit Graph

3804 Commits

Author SHA1 Message Date
Srivatsa S. Bhat f274ef8747 powerpc/pseries: Always enable CONFIG_HOTPLUG_CPU on PSERIES SMP
Adam Lackorzynski reported the following build failure on
!CONFIG_HOTPLUG_CPU configuration:

  CC      arch/powerpc/kernel/rtas.o
arch/powerpc/kernel/rtas.c: In function ‘rtas_cpu_state_change_mask’:
arch/powerpc/kernel/rtas.c:843:4: error: implicit declaration of function ‘cpu_down’ [-Werror=implicit-function-declaration]
cc1: all warnings being treated as errors
make[1]: *** [arch/powerpc/kernel/rtas.o] Error 1
make: *** [arch/powerpc/kernel] Error 2

The build fails because cpu_down() is defined only under CONFIG_HOTPLUG_CPU.

Looking further, the mobility code in pseries is one of the call-sites which
uses rtas_ibm_suspend_me(), which in turn calls rtas_cpu_state_change_mask().
And the mobility code is unconditionally compiled-in (it does not fall under
any Kconfig option). And commit 120496ac (powerpc: Bring all threads online
prior to migration/hibernation) which introduced this build regression is
critical for the proper functioning of the migration code. So it appears
that the only solution to this problem is to enable CONFIG_HOTPLUG_CPU if
SMP is enabled on PPC_PSERIES platforms. So make that change in the Kconfig.

Reported-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de>
Cc: stable@vger.kernel.org
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-01 08:29:27 +10:00
Brian King f1dd153121 powerpc/pseries: Make 32-bit MSI quirk work on systems lacking firmware support
Recent commit e61133dda4 added support
for a new firmware feature to force an adapter to use 32 bit MSIs.
However, this firmware is not available for all systems. The hack below
allows devices needing 32 bit MSIs to work on these systems as well.
It is careful to only enable this on Gen2 slots, which should limit
this to configurations where this hack is needed and tested to work.

[Small change to factor out the hack into a separate function -- BenH]

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-24 18:16:54 +10:00
Benjamin Herrenschmidt 83920c498e powerpc/powernv: Build a zImage.epapr
The zImage.epapr wrapper allows to use zImages when booting via a flat
device-tree which can be used on powernv.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-24 18:13:46 +10:00
Benjamin Herrenschmidt b72c1f6514 powerpc: Make radeon 32-bit MSI quirk work on powernv
This moves the quirk itself to pci_64.c as to get built on all ppc64
platforms (the only ones with a pci_dn), factors the two implementations
of get_pdn() into a single pci_get_dn() and use the quirk to do 32-bit
MSIs on IODA based powernv platforms.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-24 18:13:45 +10:00
Benjamin Herrenschmidt 605e44d6e6 powerpc/powernv: Fix condition for when to invalidate the TCE cache
We use two flags, one to indicate an invalidation is needed after
creating a new entry and one to indicate an invalidation is needed
after removing an entry. However we were testing the wrong flag
in the remove case.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-24 18:13:44 +10:00
Linus Torvalds a2c7a54fcc Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc fixes from Benjamin Herrenschmidt:
 "This is mostly bug fixes (some of them regressions, some of them I
  deemed worth merging now) along with some patches from Li Zhong
  hooking up the new context tracking stuff (for the new full NO_HZ)"

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (25 commits)
  powerpc: Set show_unhandled_signals to 1 by default
  powerpc/perf: Fix setting of "to" addresses for BHRB
  powerpc/pmu: Fix order of interpreting BHRB target entries
  powerpc/perf: Move BHRB code into CONFIG_PPC64 region
  powerpc: select HAVE_CONTEXT_TRACKING for pSeries
  powerpc: Use the new schedule_user API on userspace preemption
  powerpc: Exit user context on notify resume
  powerpc: Exception hooks for context tracking subsystem
  powerpc: Syscall hooks for context tracking subsystem
  powerpc/booke64: Fix kernel hangs at kernel_dbg_exc
  powerpc: Fix irq_set_affinity() return values
  powerpc: Provide __bswapdi2
  powerpc/powernv: Fix starting of secondary CPUs on OPALv2 and v3
  powerpc/powernv: Detect OPAL v3 API version
  powerpc: Fix MAX_STACK_TRACE_ENTRIES too low warning again
  powerpc: Make CONFIG_RTAS_PROC depend on CONFIG_PROC_FS
  powerpc: Bring all threads online prior to migration/hibernation
  powerpc/rtas_flash: Fix validate_flash buffer overflow issue
  powerpc/kexec: Fix kexec when using VMX optimised memcpy
  powerpc: Fix build errors STRICT_MM_TYPECHECKS
  ...
2013-05-14 07:43:11 -07:00
Li Zhong a1797b2fd2 powerpc: select HAVE_CONTEXT_TRACKING for pSeries
Start context tracking support from pSeries.

Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-14 16:00:21 +10:00
Alexander Gordeev dcb615aef9 powerpc: Fix irq_set_affinity() return values
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-14 16:00:18 +10:00
Benjamin Herrenschmidt b2b48584df powerpc/powernv: Fix starting of secondary CPUs on OPALv2 and v3
The current code fails to handle kexec on OPALv2. This fixes it
and adds code to improve the situation on OPALv3 where we can
query the CPU status from the firmware and decide what to do
based on that.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-14 15:12:31 +10:00
Benjamin Herrenschmidt 75b93da43a powerpc/powernv: Detect OPAL v3 API version
Future firmwares will support that new version

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-14 15:10:02 +10:00
Michael Ellerman b80ec3dc8e powerpc: Make CONFIG_RTAS_PROC depend on CONFIG_PROC_FS
We are getting build errors with CONFIG_PROC_FS=n:

arch/powerpc/kernel/rtas_flash.c
   In function 'rtas_flash_init':
  745:33: error: unused variable 'f' [-Werror=unused-variable]

But rtas_flash.c should not be built when CONFIG_PROC_FS=n, beacause all
it does is provide a /proc interface to the RTAS flash routines.

CONFIG_RTAS_FLASH already depends on CONFIG_RTAS_PROC, to indicate that
it depends on the RTAS proc support, but CONFIG_RTAS_PROC does not
depend on CONFIG_PROC_FS. So fix that.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-14 14:36:32 +10:00
Robert Jennings 120496ac2d powerpc: Bring all threads online prior to migration/hibernation
This patch brings online all threads which are present but not online
prior to migration/hibernation.  After migration/hibernation those
threads are taken back offline.

During migration/hibernation all online CPUs must call H_JOIN, this is
required by the hypervisor.  Without this patch, threads that are offline
(H_CEDE'd) will not be woken to make the H_JOIN call and the OS will be
deadlocked (all threads either JOIN'd or CEDE'd).

Cc: <stable@kernel.org>
Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-14 14:36:29 +10:00
Benjamin Herrenschmidt 73ed148aea powerpc/powernv: Improve kexec reliability
We add a machine_shutdown hook that frees the OPAL interrupts
(so they get masked at the source and don't fire while kexec'ing)
and which triggers an IODA reset on all the PCIe host bridges
which will have the effect of blocking all DMAs and subsequent
PCIs interrupts.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-10 16:59:18 +10:00
Linus Torvalds 5647ac0ad4 Removal of GENERIC_GPIO for v3.10
GENERIC_GPIO now synonymous with GPIOLIB. There are no longer any valid
 cases for enableing GENERIC_GPIO without GPIOLIB, even though it is
 possible to do so which has been causing confusion and breakage. This
 branch does the work to completely eliminate GENERIC_GPIO.
 
 However, it is not trivial to just create a branch to remove it. Over
 the course of the v3.9 cycle more code referencing GENERIC_GPIO has been
 added to linux-next that conflicts with this branch. The following must
 be done to resolve the conflicts when merging this branch into mainline:
 
 * "git grep CONFIG_GENERIC_GPIO" should return 0 hits. Matches should be
   replaced with CONFIG_GPIOLIB
 * "git grep '\bGENERIC_GPIO\b'" should return 1 hit in the Chinese
   documentation.
 * Selectors of GENERIC_GPIO should be turned into selectors of GPIOLIB
 * definitions of the option in architecture Kconfig code should be deleted.
 
 Stephen has 3 merge fixup patches[1] that do the above. They are currently
 applicable on mainline as of May 2nd.
 
 [1] http://www.mail-archive.com/linux-kernel@vger.kernel.org/msg428056.html
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRifUnAAoJEEFnBt12D9kBs2YP/0U6+ia+xYvkVaJc28PDVIzn
 OReZNcJOYU8D5voxz0voaRD0EdcPwjbMu9Kp9aXMHlk4VxevF+8jCc/us0bIjtO1
 VcB5VmSCIhMhxdnBlum11Mk7Vr5MCweyl9NBsypnPt8cl4obMBZHf2yzoodFktNb
 wtyYlOb6FALtc6iDbOO6dG3w9F7FAOLvskUFzdv89m8mupTsBu9jw9NqFDbJHOex
 rxq0Sdd+kWF/nkJVcV5Y6jIdletRlhpipefMJ9diexreHvwqh+c4kJEYZaXgB5+m
 ha95cPbReK1d+RqzM3A8d4irzSVSmq4k7ijI6QkFOr48+AH7XsgKv5so885LKzMN
 IIXg2Phm9i0H8+ecEvhcc4oIYBHJiEKK54Y0qUD9dqbFoDGPTCSqMHdSSMbpAY+J
 bIIXlVzj1En3PPNUJLPt8q8Qz6WxCT9mDST3QSGYnD4o90HT+1R9j92RxGL6McOq
 rUOyJDwmzFvpBvKK4raGdOU435M+ps2NPKKNIRaIGQPPY9rM1kN4YqvhXukEsC9L
 3a3+3cQLh7iKxBHncxeQsJfethP1CPkJnzvF9r+ZZLf2rcPH4pbQIE2uO0XnX/nd
 5/DKi0nGgAJ//GMMzdo3RiOA5zGFjIZ/KMvfhQldpP6qFJRhqdGi6FPlAcwr1z1n
 YnCByPwwlvfC4LTXFOGL
 =xodc
 -----END PGP SIGNATURE-----

Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux

Pull removal of GENERIC_GPIO from Grant Likely:
 "GENERIC_GPIO now synonymous with GPIOLIB.  There are no longer any
  valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it
  is possible to do so which has been causing confusion and breakage.
  This branch does the work to completely eliminate GENERIC_GPIO."

* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux:
  gpio: update gpio Chinese documentation
  Remove GENERIC_GPIO config option
  Convert selectors of GENERIC_GPIO to GPIOLIB
  blackfin: force use of gpiolib
  m68k: coldfire: use gpiolib
  mips: pnx833x: remove requirement for GENERIC_GPIO
  openrisc: default GENERIC_GPIO to false
  avr32: default GENERIC_GPIO to false
  xtensa: remove explicit selection of GENERIC_GPIO
  sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB
  powerpc: remove redundant GENERIC_GPIO selection
  unicore32: default GENERIC_GPIO to false
  unicore32: remove unneeded select GENERIC_GPIO
  arm: plat-orion: use GPIO driver on CONFIG_GPIOLIB
  arm: remove redundant GENERIC_GPIO selection
  mips: alchemy: require gpiolib
  mips: txx9: change GENERIC_GPIO to GPIOLIB
  mips: loongson: use GPIO driver on CONFIG_GPIOLIB
  mips: remove redundant GENERIC_GPIO select
2013-05-09 09:59:16 -07:00
Benjamin Herrenschmidt 1de1455f33 powerpc/powernv: Properly drop characters if console is closed
If the firmware returns an error such as "closed" (or hardware
error), we should drop characters.

Currently we only do that when a firmware compatible with OPAL v2
APIs is detected, in the code that calls opal_console_write_buffer_space(),
which didn't exist with OPAL v1 (or didn't work).

However, when enabling early debug consoles, the flag indicating
that v2 is supported isn't set yet, causing us, in case of errors
or closed console, to spin forever.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-08 14:14:26 +10:00
Benjamin Herrenschmidt 3fd47f063b powerpc/pci: Support per-aperture memory offset
The PCI core supports an offset per aperture nowadays but our arch
code still has a single offset per host bridge representing the
difference betwen CPU memory addresses and PCI MMIO addresses.

This is a problem as new machines and hypervisor versions are
coming out where the 64-bit windows will have a different offset
(basically mapped 1:1) from the 32-bit windows.

This fixes it by using separate offsets. In the long run, we probably
want to get rid of that intermediary struct pci_controller and have
those directly stored into the pci_host_bridge as they are parsed
but this will be a more invasive change.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-06 13:40:40 +10:00
Benjamin Herrenschmidt 342d6666f7 powerpc/cell/iommu: Improve error message for missing node
Some devices don't have a correct node ID and thus can't be
attached to an iommu.

The message displayed by the iommu code isn't very useful if
you don't have a device-tree node as it tries to print the
device-tree path but not the struct device name.

Improve this by printing the device name as well.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-06 12:03:49 +10:00
Benjamin Herrenschmidt 96cf3f66de powerpc/cell/spufs: Fix status attribute permission
We are registering the attribute with permission 0644 but it
doesn't have a store callback, which causes WARN_ON's during
boot. Fix the permission.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-06 12:02:05 +10:00
Benjamin Herrenschmidt f3d40c2532 powerpc/pnv: Fix "compatible" property for P8 PHB
The property should be "ibm,power8-pciex", not "ibm,p8-pciex". The latter
was changed in FW because it was inconsistent with the rest of the nodes.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-06 09:25:42 +10:00
Benjamin Herrenschmidt 4ea9008b75 powerpc/powerpnv: Properly handle failure starting CPUs
If OPAL returns an error, propagate it upward rather than spinning
seconds waiting for a CPU that will never show up

Signed-off-by: Benjamin Herrenschmidt  <benh@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-06 09:25:41 +10:00
Kleber Sacilotto de Souza d82fb31abc powerpc/pseries: Perform proper max_bus_speed detection
On pseries machines the detection for max_bus_speed should be done
through an OpenFirmware property. This patch adds a function to perform
this detection and a hook to perform dynamic adding of the function only
for pseries. This is done by overwriting the weak
pcibios_root_bridge_prepare function which is called by
pci_create_root_bus().

From: Lucas Kannebley Tavares <lucaskt@linux.vnet.ibm.com>
Signed-off-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-06 09:25:38 +10:00
Brian King e61133dda4 powerpc/pseries: Force 32 bit MSIs for devices that require it
The following patch implements a new PAPR change which allows
the OS to force the use of 32 bit MSIs, regardless of what
the PCI capabilities indicate. This is required for some
devices that advertise support for 64 bit MSIs but don't
actually support them.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-06 09:25:37 +10:00
Jeremy Kerr c4463b3738 powerpc/powernv: Defer OPAL exception handler registration
Currently, the OPAL exception vectors are registered before the feature
fixups are processed. This means that the now-firmware-owned vectors
will likely be overwritten by the kernel.

This change moves the exception registration code to an early initcall,
rather than at machine_init time.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-06 09:25:36 +10:00
Linus Torvalds 5a148af669 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc update from Benjamin Herrenschmidt:
 "The main highlights this time around are:

   - A pile of addition POWER8 bits and nits, such as updated
     performance counter support (Michael Ellerman), new branch history
     buffer support (Anshuman Khandual), base support for the new PCI
     host bridge when not using the hypervisor (Gavin Shan) and other
     random related bits and fixes from various contributors.

   - Some rework of our page table format by Aneesh Kumar which fixes a
     thing or two and paves the way for THP support.  THP itself will
     not make it this time around however.

   - More Freescale updates, including Altivec support on the new e6500
     cores, new PCI controller support, and a pile of new boards support
     and updates.

   - The usual batch of trivial cleanups & fixes"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (156 commits)
  powerpc: Fix build error for book3e
  powerpc: Context switch the new EBB SPRs
  powerpc: Turn on the EBB H/FSCR bits
  powerpc: Replace CPU_FTR_BCTAR with CPU_FTR_ARCH_207S
  powerpc: Setup BHRB instructions facility in HFSCR for POWER8
  powerpc: Fix interrupt range check on debug exception
  powerpc: Update tlbie/tlbiel as per ISA doc
  powerpc: Print page size info during boot
  powerpc: print both base and actual page size on hash failure
  powerpc: Fix hpte_decode to use the correct decoding for page sizes
  powerpc: Decode the pte-lp-encoding bits correctly.
  powerpc: Use encode avpn where we need only avpn values
  powerpc: Reduce PTE table memory wastage
  powerpc: Move the pte free routines from common header
  powerpc: Reduce the PTE_INDEX_SIZE
  powerpc: Switch 16GB and 16MB explicit hugepages to a different page table format
  powerpc: New hugepage directory format
  powerpc: Don't truncate pgd_index wrongly
  powerpc: Don't hard code the size of pte page
  powerpc: Save DAR and DSISR in pt_regs on MCE
  ...
2013-05-02 10:16:16 -07:00
Linus Torvalds 20b4fb4852 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull VFS updates from Al Viro,

Misc cleanups all over the place, mainly wrt /proc interfaces (switch
create_proc_entry to proc_create(), get rid of the deprecated
create_proc_read_entry() in favor of using proc_create_data() and
seq_file etc).

7kloc removed.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits)
  don't bother with deferred freeing of fdtables
  proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h
  proc: Make the PROC_I() and PDE() macros internal to procfs
  proc: Supply a function to remove a proc entry by PDE
  take cgroup_open() and cpuset_open() to fs/proc/base.c
  ppc: Clean up scanlog
  ppc: Clean up rtas_flash driver somewhat
  hostap: proc: Use remove_proc_subtree()
  drm: proc: Use remove_proc_subtree()
  drm: proc: Use minor->index to label things, not PDE->name
  drm: Constify drm_proc_list[]
  zoran: Don't print proc_dir_entry data in debug
  reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show()
  proc: Supply an accessor for getting the data from a PDE's parent
  airo: Use remove_proc_subtree()
  rtl8192u: Don't need to save device proc dir PDE
  rtl8187se: Use a dir under /proc/net/r8180/
  proc: Add proc_mkdir_data()
  proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h}
  proc: Move PDE_NET() to fs/proc/proc_net.c
  ...
2013-05-01 17:51:54 -07:00
David Howells 4c23782091 ppc: Clean up scanlog
Clean up the pseries scanlog driver's use of procfs:

 (1) Don't need to save the proc_dir_entry pointer as we have the filename to
     remove with.

 (2) Save the scan log buffer pointer in a static variable (there is only one
     of it) and don't save it in the PDE (which doesn't have a destructor).

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
cc: Paul Mackerras <paulus@samba.org>
cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-01 17:29:45 -04:00
David Howells 271a15eabe proc: Supply PDE attribute setting accessor functions
Supply accessor functions to set attributes in proc_dir_entry structs.

The following are supplied: proc_set_size() and proc_set_user().

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
cc: linuxppc-dev@lists.ozlabs.org
cc: linux-media@vger.kernel.org
cc: netdev@vger.kernel.org
cc: linux-wireless@vger.kernel.org
cc: linux-pci@vger.kernel.org
cc: netfilter-devel@vger.kernel.org
cc: alsa-devel@alsa-project.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-01 17:29:18 -04:00
Linus Torvalds 73287a43cc Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Highlights (1721 non-merge commits, this has to be a record of some
  sort):

   1) Add 'random' mode to team driver, from Jiri Pirko and Eric
      Dumazet.

   2) Make it so that any driver that supports configuration of multiple
      MAC addresses can provide the forwarding database add and del
      calls by providing a default implementation and hooking that up if
      the driver doesn't have an explicit set of handlers.  From Vlad
      Yasevich.

   3) Support GSO segmentation over tunnels and other encapsulating
      devices such as VXLAN, from Pravin B Shelar.

   4) Support L2 GRE tunnels in the flow dissector, from Michael Dalton.

   5) Implement Tail Loss Probe (TLP) detection in TCP, from Nandita
      Dukkipati.

   6) In the PHY layer, allow supporting wake-on-lan in situations where
      the PHY registers have to be written for it to be configured.

      Use it to support wake-on-lan in mv643xx_eth.

      From Michael Stapelberg.

   7) Significantly improve firewire IPV6 support, from YOSHIFUJI
      Hideaki.

   8) Allow multiple packets to be sent in a single transmission using
      network coding in batman-adv, from Martin Hundebøll.

   9) Add support for T5 cxgb4 chips, from Santosh Rastapur.

  10) Generalize the VXLAN forwarding tables so that there is more
      flexibility in configurating various aspects of the endpoints.
      From David Stevens.

  11) Support RSS and TSO in hardware over GRE tunnels in bxn2x driver,
      from Dmitry Kravkov.

  12) Zero copy support in nfnelink_queue, from Eric Dumazet and Pablo
      Neira Ayuso.

  13) Start adding networking selftests.

  14) In situations of overload on the same AF_PACKET fanout socket, or
      per-cpu packet receive queue, minimize drop by distributing the
      load to other cpus/fanouts.  From Willem de Bruijn and Eric
      Dumazet.

  15) Add support for new payload offset BPF instruction, from Daniel
      Borkmann.

  16) Convert several drivers over to mdoule_platform_driver(), from
      Sachin Kamat.

  17) Provide a minimal BPF JIT image disassembler userspace tool, from
      Daniel Borkmann.

  18) Rewrite F-RTO implementation in TCP to match the final
      specification of it in RFC4138 and RFC5682.  From Yuchung Cheng.

  19) Provide netlink socket diag of netlink sockets ("Yo dawg, I hear
      you like netlink, so I implemented netlink dumping of netlink
      sockets.") From Andrey Vagin.

  20) Remove ugly passing of rtnetlink attributes into rtnl_doit
      functions, from Thomas Graf.

  21) Allow userspace to be able to see if a configuration change occurs
      in the middle of an address or device list dump, from Nicolas
      Dichtel.

  22) Support RFC3168 ECN protection for ipv6 fragments, from Hannes
      Frederic Sowa.

  23) Increase accuracy of packet length used by packet scheduler, from
      Jason Wang.

  24) Beginning set of changes to make ipv4/ipv6 fragment handling more
      scalable and less susceptible to overload and locking contention,
      from Jesper Dangaard Brouer.

  25) Get rid of using non-type-safe NLMSG_* macros and use nlmsg_*()
      instead.  From Hong Zhiguo.

  26) Optimize route usage in IPVS by avoiding reference counting where
      possible, from Julian Anastasov.

  27) Convert IPVS schedulers to RCU, also from Julian Anastasov.

  28) Support cpu fanouts in xt_NFQUEUE netfilter target, from Holger
      Eitzenberger.

  29) Network namespace support for nf_log, ebt_log, xt_LOG, ipt_ULOG,
      nfnetlink_log, and nfnetlink_queue.  From Gao feng.

  30) Implement RFC3168 ECN protection, from Hannes Frederic Sowa.

  31) Support several new r8169 chips, from Hayes Wang.

  32) Support tokenized interface identifiers in ipv6, from Daniel
      Borkmann.

  33) Use usbnet_link_change() helper in USB net driver, from Ming Lei.

  34) Add 802.1ad vlan offload support, from Patrick McHardy.

  35) Support mmap() based netlink communication, also from Patrick
      McHardy.

  36) Support HW timestamping in mlx4 driver, from Amir Vadai.

  37) Rationalize AF_PACKET packet timestamping when transmitting, from
      Willem de Bruijn and Daniel Borkmann.

  38) Bring parity to what's provided by /proc/net/packet socket dumping
      and the info provided by netlink socket dumping of AF_PACKET
      sockets.  From Nicolas Dichtel.

  39) Fix peeking beyond zero sized SKBs in AF_UNIX, from Benjamin
      Poirier"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits)
  filter: fix va_list build error
  af_unix: fix a fatal race with bit fields
  bnx2x: Prevent memory leak when cnic is absent
  bnx2x: correct reading of speed capabilities
  net: sctp: attribute printl with __printf for gcc fmt checks
  netlink: kconfig: move mmap i/o into netlink kconfig
  netpoll: convert mutex into a semaphore
  netlink: Fix skb ref counting.
  net_sched: act_ipt forward compat with xtables
  mlx4_en: fix a build error on 32bit arches
  Revert "bnx2x: allow nvram test to run when device is down"
  bridge: avoid OOPS if root port not found
  drivers: net: cpsw: fix kernel warn on cpsw irq enable
  sh_eth: use random MAC address if no valid one supplied
  3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA)
  tg3: fix to append hardware time stamping flags
  unix/stream: fix peeking with an offset larger than data in queue
  unix/dgram: fix peeking with an offset larger than data in queue
  unix/dgram: peek beyond 0-sized skbs
  openvswitch: Remove unneeded ovs_netdev_get_ifindex()
  ...
2013-05-01 14:08:52 -07:00
Linus Torvalds 3ed1c478ef Power management and ACPI updates for 3.10-rc1
- ARM big.LITTLE cpufreq driver from Viresh Kumar.
 
 - exynos5440 cpufreq driver from Amit Daniel Kachhap.
 
 - cpufreq core cleanup and code consolidation from Viresh Kumar and
   Stratos Karafotis.
 
 - cpufreq scalability improvement from Nathan Zimmer.
 
 - AMD "frequency sensitivity feedback" powersave bias for the ondemand
   cpufreq governor from Jacob Shin.
 
 - cpuidle code consolidation and cleanups from Daniel Lezcano.
 
 - ARM OMAP cpuidle fixes from Santosh Shilimkar and Daniel Lezcano.
 
 - ACPICA fixes and other improvements from Bob Moore, Jung-uk Kim,
   Lv Zheng, Yinghai Lu, Tang Chen, Colin Ian King, and Linn Crosetto.
 
 - ACPI core updates related to hotplug from Toshi Kani, Paul Bolle,
   Yasuaki Ishimatsu, and Rafael J. Wysocki.
 
 - Intel Lynxpoint LPSS (Low-Power Subsystem) support improvements
   from Rafael J. Wysocki and Andy Shevchenko.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJRf8M8AAoJEKhOf7ml8uNsud4P/3cabXP5lDipzibRrpOiONse
 puuvIdhtNdMRMc3t1oSDjNH/w/JA51Gc+ICGFAORiyVmqxBc85mpT6J5ibqV7hNd
 pCqbKJceoB5PajHZSx22e4wG9O7YN1k3r80p38IfFzA+Ct0KNSuE0ixMEfHKYjiq
 p5pXswk6TY3gtBReH9agrafHqDtXw4IMTE0asMuJ+BorPW7vQeiNlrkuA+0qmDuu
 26O0Pm2TVkx1ryfTjdM9zSZ9X2G4JuM8rm1/VFZWQJTExwlv3bA2Za1nvQNJlJ99
 6JZ0JXfAehcEW2Ye0sqsZ8HSEabDVHM29QvvOszJ5RpBXERiOCHOkhvFleCoTpn0
 Xq0rtXPrLMH1G28Ej+cxmsAjfzOLV2Byg30CAoI/GCLuQ+xh+VMCpuNYQuld25CG
 9rtYd0fWESeYsAebhDcX0E3xyzJtbrHtOb9PyGwNkbAJ8YQfhVSMCOPi2SX2wa+Q
 qXLXi2VaHvjBSUKcAv5BmM+Ya57Be+88D0LxbgXbUeOnYefUK1ljldKDDshkMjgG
 P4LPdm4JpoB5ncXSOO1Dz9w9QnNcFexSUySd/TtKLNMha1vEHV8ISzNPYY+9IdXf
 XN0VZbFnUDzdj+Fwna7zyFb1cGihDYJKAtpXvRd8Y6RGUxKx9uGLAFJZw/xZB/cR
 KZKuML5O8MgJuef37F38
 =H/se
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management and ACPI updates from Rafael J Wysocki:

 - ARM big.LITTLE cpufreq driver from Viresh Kumar.

 - exynos5440 cpufreq driver from Amit Daniel Kachhap.

 - cpufreq core cleanup and code consolidation from Viresh Kumar and
   Stratos Karafotis.

 - cpufreq scalability improvement from Nathan Zimmer.

 - AMD "frequency sensitivity feedback" powersave bias for the ondemand
   cpufreq governor from Jacob Shin.

 - cpuidle code consolidation and cleanups from Daniel Lezcano.

 - ARM OMAP cpuidle fixes from Santosh Shilimkar and Daniel Lezcano.

 - ACPICA fixes and other improvements from Bob Moore, Jung-uk Kim, Lv
   Zheng, Yinghai Lu, Tang Chen, Colin Ian King, and Linn Crosetto.

 - ACPI core updates related to hotplug from Toshi Kani, Paul Bolle,
   Yasuaki Ishimatsu, and Rafael J Wysocki.

 - Intel Lynxpoint LPSS (Low-Power Subsystem) support improvements from
   Rafael J Wysocki and Andy Shevchenko.

* tag 'pm+acpi-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (192 commits)
  cpufreq: Revert incorrect commit 5800043
  cpufreq: MAINTAINERS: Add co-maintainer
  cpuidle: add maintainer entry
  ACPI / thermal: do not always return THERMAL_TREND_RAISING for active trip points
  ARM: s3c64xx: cpuidle: use init/exit common routine
  cpufreq: pxa2xx: initialize variables
  ACPI: video: correct acpi_video_bus_add error processing
  SH: cpuidle: use init/exit common routine
  ARM: S5pv210: compiling issue, ARM_S5PV210_CPUFREQ needs CONFIG_CPU_FREQ_TABLE=y
  ACPI: Fix wrong parameter passed to memblock_reserve
  cpuidle: fix comment format
  pnp: use %*phC to dump small buffers
  isapnp: remove debug leftovers
  ARM: imx: cpuidle: use init/exit common routine
  ARM: davinci: cpuidle: use init/exit common routine
  ARM: kirkwood: cpuidle: use init/exit common routine
  ARM: calxeda: cpuidle: use init/exit common routine
  ARM: tegra: cpuidle: use init/exit common routine for tegra3
  ARM: tegra: cpuidle: use init/exit common routine for tegra2
  ARM: OMAP4: cpuidle: use init/exit common routine
  ...
2013-04-30 15:21:02 -07:00
Aneesh Kumar K.V b1022fbd29 powerpc: Decode the pte-lp-encoding bits correctly.
We look at both the segment base page size and actual page size and store
the pte-lp-encodings in an array per base page size.

We also update all relevant functions to take actual page size argument
so that we can use the correct PTE LP encoding in HPTE. This should also
get the basic Multiple Page Size per Segment (MPSS) support. This is needed
to enable THP on ppc64.

[Fixed PR KVM build --BenH]

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-30 16:00:14 +10:00
Aneesh Kumar K.V 74f227b228 powerpc: Use encode avpn where we need only avpn values
In all these cases we are doing something similar to

HPTE_V_COMPARE(hpte_v, want_v) which ignores the HPTE_V_LARGE bit

With MPSS support we would need actual page size to set HPTE_V_LARGE
bit and that won't be available in most of these cases. Since we are ignoring
HPTE_V_LARGE bit, use the  avpn value instead. There should not be any change
in behaviour after this patch.

Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-30 16:00:11 +10:00
Aneesh Kumar K.V 4b8f63d92e powerpc: Use signed formatting when printing error
PAPR defines these errors as negative values. So print them accordingly
for easy debugging.

Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-30 15:59:39 +10:00
Benjamin Herrenschmidt bc23100a0d Merge remote-tracking branch 'kumar/next' into next
From Kumar Gala:
<<
Add support for T4 and B4 SoC families from Freescale, e6500 altivec
support, some various board fixes and other minor cleanups.
>>
2013-04-30 11:10:09 +10:00
Benjamin Herrenschmidt 28bf41a1fe Merge remote-tracking branch 'agust/next' into next
From Anatolij Gustschin:
<<
There are some changes for mpc5121 generic platform code
to support mpc5125 SoC and DTS files for ac14xx and
MPC5125-TWR boards.
>>
2013-04-30 11:08:45 +10:00
Michel Lespinasse 34d07177b8 mm: remove free_area_cache use in powerpc architecture
As all other architectures have been converted to use vm_unmapped_area(),
we are about to retire the free_area_cache.

This change simply removes the use of that cache in
slice_get_unmapped_area(), which will most certainly have a
performance cost. Next one will convert that function to use the
vm_unmapped_area() infrastructure and regain the performance.

Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-30 11:05:10 +10:00
David Rientjes 4edd7ceff0 mm, hotplug: avoid compiling memory hotremove functions when disabled
__remove_pages() is only necessary for CONFIG_MEMORY_HOTREMOVE.  PowerPC
pseries will return -EOPNOTSUPP if unsupported.

Adding an #ifdef causes several other functions it depends on to also
become unnecessary, which saves in .text when disabled (it's disabled in
most defconfigs besides powerpc, including x86).  remove_memory_block()
becomes static since it is not referenced outside of
drivers/base/memory.c.

Build tested on x86 and powerpc with CONFIG_MEMORY_HOTREMOVE both enabled
and disabled.

Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29 15:54:37 -07:00
Jiang Liu 5d585e5c48 mm/ppc: use common help functions to free reserved pages
Use common help functions to free reserved pages.

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29 15:54:30 -07:00
Linus Torvalds ec25e246b9 USB patches for 3.10-rc1
Here's the big USB pull request for 3.10-rc1.
 
 Lots of USB patches here, the majority being USB gadget changes and
 USB-serial driver cleanups, the rest being ARM build fixes / cleanups,
 and individual driver updates.  We also finally got some chipidea fixes,
 which have been delayed for a number of kernel releases, as the
 maintainer has now reappeared.
 
 All of these have been in linux-next for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlF+md4ACgkQMUfUDdst+ymkSgCfZWIiCtiX/li0yJqSiRB4yYJx
 Ex0AoNemOOf6ywvSOHPbILTbJ1G+c/PX
 =JmvB
 -----END PGP SIGNATURE-----

Merge tag 'usb-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB patches from Greg Kroah-Hartman:
 "Here's the big USB pull request for 3.10-rc1.

  Lots of USB patches here, the majority being USB gadget changes and
  USB-serial driver cleanups, the rest being ARM build fixes / cleanups,
  and individual driver updates.  We also finally got some chipidea
  fixes, which have been delayed for a number of kernel releases, as the
  maintainer has now reappeared.

  All of these have been in linux-next for a while"

* tag 'usb-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (568 commits)
  USB: ehci-msm: USB_MSM_OTG needs USB_PHY
  USB: OHCI: avoid conflicting platform drivers
  USB: OMAP: ISP1301 needs USB_PHY
  USB: lpc32xx: ISP1301 needs USB_PHY
  USB: ftdi_sio: enable two UART ports on ST Microconnect Lite
  usb: phy: tegra: don't call into tegra-ehci directly
  usb: phy: phy core cannot yet be a module
  USB: Fix initconst in ehci driver
  usb-storage: CY7C68300A chips do not support Cypress ATACB
  USB: serial: option: Added support Olivetti Olicard 145
  USB: ftdi_sio: correct ST Micro Connect Lite PIDs
  ARM: mxs_defconfig: add CONFIG_USB_PHY
  ARM: imx_v6_v7_defconfig: add CONFIG_USB_PHY
  usb: phy: remove exported function from __init section
  usb: gadget: zero: put function instances on unbind
  usb: gadget: f_sourcesink.c: correct a copy-paste misnomer
  usb: gadget: cdc2: fix error return code in cdc_do_config()
  usb: gadget: multi: fix error return code in rndis_do_config()
  usb: gadget: f_obex: fix error return code in obex_bind()
  USB: storage: convert to use module_usb_driver()
  ...
2013-04-29 12:19:23 -07:00
Rafael J. Wysocki 885f925eef Merge branch 'pm-cpufreq'
* pm-cpufreq: (57 commits)
  cpufreq: MAINTAINERS: Add co-maintainer
  cpufreq: pxa2xx: initialize variables
  ARM: S5pv210: compiling issue, ARM_S5PV210_CPUFREQ needs CONFIG_CPU_FREQ_TABLE=y
  cpufreq: cpu0: Put cpu parent node after using it
  cpufreq: ARM big LITTLE: Adapt to latest cpufreq updates
  cpufreq: ARM big LITTLE: put DT nodes after using them
  cpufreq: Don't call __cpufreq_governor() for drivers without target()
  cpufreq: exynos5440: Protect OPP search calls with RCU lock
  cpufreq: dbx500: Round to closest available freq
  cpufreq: Call __cpufreq_governor() with correct policy->cpus mask
  cpufreq / intel_pstate: Optimize intel_pstate_set_policy
  cpufreq: OMAP: instantiate omap-cpufreq as a platform_driver
  arm: exynos: Enable OPP library support for exynos5440
  cpufreq: exynos: Remove error return even if no soc is found
  cpufreq: exynos: Add cpufreq driver for exynos5440
  cpufreq: AMD "frequency sensitivity feedback" powersave bias for ondemand governor
  cpufreq: ondemand: allow custom powersave_bias_target handler to be registered
  cpufreq: convert cpufreq_driver to using RCU
  cpufreq: powerpc/platforms/cell: move cpufreq driver to drivers/cpufreq
  cpufreq: sparc: move cpufreq driver to drivers/cpufreq
  ...

Conflicts:
	MAINTAINERS (with commit a8e39c3 from pm-cpuidle)
	drivers/cpufreq/cpufreq_governor.h (with commit beb0ff3)
2013-04-28 02:10:46 +02:00
Rafael J. Wysocki e4f5a3adc4 Merge branch 'pm-cpuidle'
* pm-cpuidle: (51 commits)
  cpuidle: add maintainer entry
  ARM: s3c64xx: cpuidle: use init/exit common routine
  SH: cpuidle: use init/exit common routine
  cpuidle: fix comment format
  ARM: imx: cpuidle: use init/exit common routine
  ARM: davinci: cpuidle: use init/exit common routine
  ARM: kirkwood: cpuidle: use init/exit common routine
  ARM: calxeda: cpuidle: use init/exit common routine
  ARM: tegra: cpuidle: use init/exit common routine for tegra3
  ARM: tegra: cpuidle: use init/exit common routine for tegra2
  ARM: OMAP4: cpuidle: use init/exit common routine
  ARM: shmobile: cpuidle: use init/exit common routine
  ARM: tegra: cpuidle: use init/exit common routine
  ARM: OMAP3: cpuidle: use init/exit common routine
  ARM: at91: cpuidle: use init/exit common routine
  ARM: ux500: cpuidle: use init/exit common routine
  cpuidle: make a single register function for all
  ARM: ux500: cpuidle: replace for_each_online_cpu by for_each_possible_cpu
  cpuidle: remove en_core_tk_irqen flag
  ARM: OMAP3: remove cpuidle_wrap_enter
  ...
2013-04-28 01:54:49 +02:00
Gavin Shan 959c9bdd58 powerpc/powernv: Fix invalid IOMMU table
Ben found the root cause. Commit 37f02195be
("powerpc/pci: fix PCI-e devices rescan issue on powerpc platform")
overwrites the IOMMU table of PCI device while enabling PCI device.
The patch intends to fix the IOMMU table after that point.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-26 16:10:00 +10:00
Gavin Shan 373f565741 powerpc/powernv: Build DMA space for PE on PHB3
The patch intends to build 32-bits DMA space for individual PEs on
PHB3. The TVE# is recognized by the combo of PE# and fixed bits
from DMA address, which is zero for 32-bits DMA space.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-26 16:10:00 +10:00
Gavin Shan 4cce95508b powerpc/powernv: TCE invalidation for PHB3
The TCE should be invalidated while it's created or free'd. The
approach to do that for IODA1 and IODA2 compliant PHBs are different.
So the patch differentiate them with different functions called to
do that for IODA1 and IODA2 compliant PHBs. It's notable that the
PCI address is used to invalidate the corresponding TCE on IODA2
compliant PHB3.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-26 16:09:59 +10:00
Gavin Shan 137436c9a6 powerpc/powernv: Patch MSI EOI handler on P8
The EOI handler of MSI/MSI-X interrupts for P8 (PHB3) need additional
steps to handle the P/Q bits in IVE before EOIing the corresponding
interrupt. The patch changes the EOI handler to cover that. we have
individual IRQ chip in each PHB instance. During the MSI IRQ setup
time, the IRQ chip is copied over from the original one for that IRQ,
and the EOI handler is patched with the one that will handle the P/Q
bits (As Ben suggested).

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-26 16:09:59 +10:00
Gavin Shan a486bdb0e9 powerpc/powernv: Add option CONFIG_POWERNV_MSI
As Michael Ellerman suggested, to add CONFIG_POWERNV_MSI for PowerNV
platform. That's similar to CONFIG_PSERIES_MSI for pSeries platform.
For now, we don't make it dependent on CONFIG_EEH since it's not ready
to enable that yet.

Apart from that, we also enable CONFIG_PPC_MSI_BITMAP on selecting
CONFIG_POWERNV_MSI.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-26 16:09:58 +10:00
Gavin Shan aa0c033f99 powerpc/powernv: Supports PHB3
The patch intends to initialize PHB3 during system boot stage. The
flag "PNV_PHB_MODEL_PHB3" is introduced to differentiate IODA2
compatible PHB3 from other types of PHBs.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-26 16:08:27 +10:00
Jesse Larrew 5d88aa85c0 powerpc/pseries: Update CPU maps when device tree is updated
Platform events such as partition migration or the new PRRN firmware
feature can cause the NUMA characteristics of a CPU to change, and these
changes will be reflected in the device tree nodes for the affected
CPUs.

This patch registers a handler for Open Firmware device tree updates
and reconfigures the CPU and node maps whenever the associativity
changes. Currently, this is accomplished by marking the affected CPUs in
the cpu_associativity_changes_mask and allowing
arch_update_cpu_topology() to retrieve the new associativity information
using hcall_vphn().

Protecting the NUMA cpu maps from concurrent access during an update
operation will be addressed in a subsequent patch in this series.

Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-26 16:08:23 +10:00
Nathan Fontenot f0ff7eb483 powerpc/pseries: Update firmware_has_feature() to check architecture vector 5 bits
The firmware_has_feature() function makes it easy to check for supported
features of the hypervisor. This patch extends the capability of
firmware_has_feature() to include checking for specified bits
in vector 5 of the architecture vector as reported in the device tree.

As part of this the #defines used for the architecture vector are re-defined
such that each option has the index into vector 5 and the feature bit encoded
into it. This makes checking for architecture bits when initiating data
for firmware_has_feature much easier.

Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-26 16:08:22 +10:00
Nathan Fontenot 43c0ea6053 powerpc/pseries: Use ARRAY_SIZE to iterate over firmware_features_table array
When iterating over the entries in firmware_features_table we only need
to go over the actual number of entries in the array instead of declaring
it to be bigger and checking to make sure there is a valid entry in every
slot.

This patch removes the FIRMWARE_MAX_FEATURES #define and replaces the
array looping with the use of ARRAY_SIZE().

Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-26 16:08:21 +10:00
Nathan Fontenot 2e9b7b02a3 powerpc/pseries: Correct buffer parsing in update_dt_node()
Correct parsing of the buffer returned from ibm,update-properties. The first
element is a length and the path to the property which is slightly different
from the list of properties in the buffer so we need to specifically
handle this.

Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-26 16:08:19 +10:00