There is a scenario that dp cable is unplugged from DUT during system
suspended will cause audio option state does not match real connection
state. Fix this problem by Signaling audio plugged change with realtime
connection status at dp_pm_resume() so that audio option will be in
correct state after system resumed.
Changes in V2:
-- correct Fixes tag commit id.
Fixes: f591dbb5fb ("drm/msm/dp: power off DP phy at suspend")
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1627059339-12142-1-git-send-email-khsieh@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Some bootloaders set the widebus enable bit in the INTF_CONFIG register,
but configuration of widebus isn't yet supported ensure that the
register has a known value, with widebus disabled.
Fixes: c943b4948b ("drm/msm/dp: add displayPort driver support")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210722024434.3313167-1-bjorn.andersson@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
DP cable should always connect to DPU during the entire PHY compliance
testing run. Since DP PHY compliance test is executed at irq_hpd event
context, dp_ctrl_off_link_stream() should be used instead of dp_ctrl_off().
dp_ctrl_off() is used for unplug event which is triggered when DP cable is
dis connected.
Changes in V2:
-- add fixes statement
Fixes: f21c8a276c ("drm/msm/dp: handle irq_hpd with sink_count = 0 correctly")
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1626191647-13901-2-git-send-email-khsieh@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
It turns out that when the display is enabled by the bootloader, we can
get some transient iommu faults from the display. Which doesn't go over
too well when we install a fault handler that is gpu specific. To avoid
this, defer installing the fault handler until we get around to setting
up per-process pgtables (which is adreno_smmu specific). The arm-smmu
fallback error reporting is sufficient for reporting display related
faults (and in fact was all we had prior to f8f934c180)
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reported-by: Yassine Oudjana <y.oudjana@protonmail.com>
Fixes: 2a574cc05d ("drm/msm: Improve the a6xx page fault handler")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Tested-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210707180113.840741-1-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
The downstream dts lists this value as 0x494, and not
0x45c.
Fixes: af776a3e1c ("drm/msm/dpu: add SM8250 to hw catalog")
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210628085033.9905-1-robert.foss@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fix the following fall-through warning:
drivers/gpu/drm/msm/msm_gem.c: In function 'msm_gem_new_impl':
drivers/gpu/drm/msm/msm_gem.c:1170:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
1170 | if (priv->has_cached_coherent)
| ^
drivers/gpu/drm/msm/msm_gem.c:1173:2: note: here
1173 | default:
| ^~~~~~~
by replacing the /* fallthrough */ comment with fallthrough;
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
* devcoredump support for display errors
* dpu: irq cleanup/refactor
* dpu: dt bindings conversion to yaml
* dsi: dt bindings conversion to yaml
* mdp5: alpha/blend_mode/zpos support
* a6xx: cached coherent buffer support
* a660 support
* gpu iova fault improvements:
- info about which block triggered the fault, etc
- generation of gpu devcoredump on fault
* assortment of other cleanups and fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGs4=qsGBBbyn-4JWqW4-YUSTKh67X3DsPQ=T2D9aXKqNA@mail.gmail.com
Instead of using static bandwidth setup, manage bandwidth dynamically,
depending on the amount of allocated planes, their format and
resolution.
Co-developed-with: James Willcox <jwillcox@squareup.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20210525131316.3117809-8-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Prior downstream kernels had "fudge factors" in devicetree which would
be applied to things like interconnect bandwidth calculations. Bring
some of those values back here.
Signed-off-by: James Willcox <jwillcox@squareup.com>
[DB: changed _ff to _inefficiency, fixed patch description]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210525131316.3117809-7-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Hook alpha and pixel blend mode support to be exported as proper DRM
plane properties. This allows using this functionality from the
userspace.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210525131316.3117809-5-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Use generic helpers code to manage drm_plane_state part of mdp5_plane
state instead of manually coding all the details.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210525131316.3117809-2-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Move the call to dsi_mgr_phy_enable after checking whether the DSI
interface is slave, so that PHY enablement happens together with the
host enablement.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210609211211.2561090-1-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Handling of the interrupt callback lists is done in dpu_core_irq.c,
under the "cb_lock" spinlock. When these operations results in the need
for enableing or disabling the IRQ in the hardware the code jumps to
dpu_hw_interrupts.c, which protects its operations with "irq_lock"
spinlock.
When an interrupt fires, dpu_hw_intr_dispatch_irq() inspects the
hardware state while holding the "irq_lock" spinlock and jumps to
dpu_core_irq_callback_handler() to invoke the registered handlers, which
traverses the callback list under the "cb_lock" spinlock.
As such, in the event that these happens concurrently we'll end up with
a deadlock.
Prior to '1c1e7763a6d4 ("drm/msm/dpu: simplify IRQ enabling/disabling")'
the enable/disable of the hardware interrupt was done outside the
"cb_lock" region, optimitically by using an atomic enable-counter for
each interrupt and an warning print if someone changed the list between
the atomic_read and the time the operation concluded.
Rather than re-introducing the large array of atomics, this change
embraces the fact that dpu_core_irq and dpu_hw_interrupts are deeply
entangled and make them share the single "irq_lock".
Following this step it's suggested that we squash the two parts into a
single irq handling thing.
Fixes: 1c1e7763a6d4 ("drm/msm/dpu: simplify IRQ enabling/disabling")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210611170003.3539059-1-bjorn.andersson@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Wire up support to stall the SMMU on iova fault, and collect a devcore-
dump snapshot for easier debugging of faults.
Currently this is a6xx-only, but mostly only because so far it is the
only one using adreno-smmu-priv.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Jordan Crouse <jordan@cosmicpenguin.net>
Link: https://lore.kernel.org/r/20210610214431.539029-6-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Use the new adreno-smmu-priv fault info function to get more SMMU
debug registers and print the current TTBR0 to debug per-instance
pagetables and figure out which GPU block generated the request.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210610214431.539029-4-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
While keeping the previous default value for hangcheck period,
we allow now the possibility of configuring its value via
debugfs.
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Link: https://lore.kernel.org/r/20210607104441.184700-1-siglesias@igalia.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add adreno_is_{a660,a650_family} helpers and convert update existing
adreno_is_a650 usage based on downstream driver's logic (changing into
adreno_is_a650_family or adding adreno_is_a660).
And add the remaining changes required for A660, again based on
the downstream driver: missing GMU allocations, additional register init,
dummy hfi BW table, cp protect list, entry in gpulist table, hwcg table,
updated a6xx_ucode_check_version check.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20210608172808.11803-6-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
SM8250 AOP firmware already sets up PDC registers for us, and it only needs
to be enabled. This path will be used for other newer GPUs.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20210608172808.11803-3-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
These aren't used by anything anymore.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org>
Link: https://lore.kernel.org/r/20210608172808.11803-2-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
Based on mesa commit daa2ccff7a0201941db3901780d179e2634057d5
Small bit of .c churn in the phy code to adapt to split up of phy
related registers.
Signed-off-by: Rob Clark <robdclark@chromium.org>
The code does not really use dpu_hw_blk fields, so drop them, making
dpu_hw_blk empty structure.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210515190909.1809050-5-dmitry.baryshkov@linaro.org
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Use struct dpu_hw_merge_3d pointer in struct dpu_hw_pingpong rather
than using struct dpu_hw_blk. This is the only user of dpu_hw_blk.id,
which will be cleaned in the next patch.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210515190909.1809050-4-dmitry.baryshkov@linaro.org
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The dpu_hw_blk_destroy() function is empty, so we can drop it now.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210515190909.1809050-3-dmitry.baryshkov@linaro.org
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Remove all unused dpu_hw_blk features and functions:
- dpu_hw_blk_get()/_put() and respective refcounting,
- global list of all dpu_hw_blk instances,
- dpu_hw_blk_ops and empty implementation inside each hw_blk subdriver.
This leaves dpu_hw_blk as a placeholder with just type and index.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210515190909.1809050-2-dmitry.baryshkov@linaro.org
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
In order to ease debugging of DSI host registration issues, print return
code of dsi_mgr_setup_components().
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/msm/dp/dp_link.c:374: warning: expecting prototype for dp_parse_video_pattern_params(). Prototype was for dp_link_parse_video_pattern_params() instead
drivers/gpu/drm/msm/dp/dp_link.c:573: warning: expecting prototype for dp_parse_phy_test_params(). Prototype was for dp_link_parse_phy_test_params() instead
drivers/gpu/drm/msm/dp/dp_link.c:975: warning: expecting prototype for dp_link_process_downstream_port_status_change(). Prototype was for dp_link_process_ds_port_status_change() instead
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Chandan Uddaraju <chandanu@codeaurora.org>
Cc: Kuogee Hsieh <khsieh@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210602143300.2330146-15-lee.jones@linaro.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/msm/dp/dp_catalog.c:206: warning: Function parameter or member 'dp_catalog' not described in 'dp_catalog_aux_reset'
drivers/gpu/drm/msm/dp/dp_catalog.c:206: warning: Excess function parameter 'aux' description in 'dp_catalog_aux_reset'
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Chandan Uddaraju <chandanu@codeaurora.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210602143300.2330146-14-lee.jones@linaro.org
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/msm/msm_gem.c:364: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/gpu/drm/msm/msm_gem.c:763: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210602143300.2330146-13-lee.jones@linaro.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:373: warning: expecting prototype for _dpu_plane_set_panic_lut(). Prototype was for _dpu_plane_set_danger_lut() instead
drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:498: warning: expecting prototype for _dpu_plane_set_vbif_qos(). Prototype was for _dpu_plane_set_qos_remap() instead
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210602143300.2330146-12-lee.jones@linaro.org
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
These messages are useful for bringup/early development but in
production they don't provide much value. We know what sort of GPU we
have and interrupt information can be gathered other ways. This cuts
down on lines in the drm debug logs that happen too often, making the
debug logs practically useless.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Abhinav Kumar <abhinavk@codeaurora.org>
Cc: Kuogee Hsieh <khsieh@codeaurora.org>
Cc: aravindh@codeaurora.org
Cc: Sean Paul <sean@poorly.run>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210430193104.1770538-3-swboyd@chromium.org
[resolve merge conflicts with dpu irq refactor]
Signed-off-by: Rob Clark <robdclark@chromium.org>
Normal DP suspend operation contains two steps, display off followed
by dp suspend, to complete system wide suspending cycle if display is
up at that time. In this case, DP phy will be powered off at display
off. However there is an exception case that depending on the timing
of dongle plug in during system wide suspending, sometimes display off
procedure may be skipped and dp suspend was called directly. In this
case, dp phy is stay at powered on (phy->power_count = 1) so that at
next resume dp driver crash at main link clock enable due to phy is
not physically powered on. This patch will call dp_ctrl_off_link_stream()
to tear down main link and power off phy at dp_pm_suspend() if main link
had been brought up.
Changes in V2:
-- stashed changes into dp_ctrl.c
-- add is_phy_on to monitor phy state
Changes in V3:
-- delete is_phy_on
-- call dp_ctrl_off_link_stream() from dp_pm_suspend()
Changes in V4:
-- delete changes made at dp_power.c
-- move main link status checking to dp_pm_suspend
Changes in V5:
-- correct commit id at Fixes tag
Fixes: 8dbde399044b ("drm/msm/dp: handle irq_hpd with sink_count = 0 correctly)
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1622734846-14179-1-git-send-email-khsieh@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
The result of container_of() operations is never NULL unless the embedded
element is the first element of the structure. This is not the case here.
The NULL checks on the result of container_of() are therefore unnecessary
and misleading. Remove them.
This change was made automatically with the following Coccinelle script.
@@
type t;
identifier v;
statement s;
@@
<+...
(
t v = container_of(...);
|
v = container_of(...);
)
...
when != v
- if (\( !v \| v == NULL \) ) s
...+>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210525112904.1747066-1-linux@roeck-us.net
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[DB: fixed patch subject]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The result of container_of() operations is never NULL unless the embedded
element is the first element of the structure. This is not the case here.
The NULL check on the result of container_of() is therefore unnecessary
and misleading. Remove it.
This change was made automatically with the following Coccinelle script.
@@
type t;
identifier v;
statement s;
@@
<+...
(
t v = container_of(...);
|
v = container_of(...);
)
...
when != v
- if (\( !v \| v == NULL \) ) s
...+>
While at it, remove unused but assigned variable hpd in
dp_display_usbpd_attention_cb().
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210525032033.453143-1-linux@roeck-us.net
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
clang is a little overzealous with warning about a constant conversion
in an untaken branch of a ternary expression:
drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c:975:48: error: implicit conversion from 'unsigned long long' to 'unsigned long' changes value from 5000000000 to 705032704 [-Werror,-Wconstant-conversion]
.max_pll_rate = (5000000000ULL < ULONG_MAX) ? 5000000000UL : ULONG_MAX,
^~~~~~~~~~~~
Rewrite this to use a preprocessor conditional instead to avoid the
warning.
Fixes: 076437c9e3 ("drm/msm/dsi: move min/max PLL rate to phy config")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210514213032.575161-1-arnd@kernel.org
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This patch fix coccicheck warning:
drivers/gpu/drm/msm/dp/dp_link.c:848:5-8: Unneeded variable: "ret". Return "0" on line 880
Also remove unneeded function return value check.
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Link: https://lore.kernel.org/r/20210407130654.3387-1-bernard@vivo.com
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes the following W=1 kernel build warning:
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c: In function ‘dpu_encoder_phys_cmd_wait_for_commit_done’:
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c:688:31: warning: variable ‘cmd_enc’ set but not used [-Wunused-but-set-variable]
Fixes: fe286893ed ("drm/msm/dpu: Remove unused call in wait_for_commit_done")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210407083334.2762-1-thunder.leizhen@huawei.com
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/msm/dp/dp_display.c: In function ‘dp_display_usbpd_attention_cb’:
drivers/gpu/drm/msm/dp/dp_display.c:496:19: warning: variable ‘hpd’ set but not used [-Wunused-but-set-variable]
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Kuogee Hsieh <khsieh@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210303134319.3160762-4-lee.jones@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Use resource-managed OPP API to simplify code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210314163408.22292-12-digetx@gmail.com
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Sean Paul