In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Notice that in this particular case, I replaced "No break" with a
proper "Fall through" annotation, which is what GCC is expecting
to find.
Warning level 2 was used: -Wimplicit-fallthrough=2
Addresses-Coverity-ID: 115051 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
This fixes a pair of problems in the Smack ptrace checks
related to checking capabilities. In both cases, as reported
by Lukasz Pawelczyk, the raw capability calls are used rather
than the Smack wrapper that check addition restrictions.
In one case, as reported by Jann Horn, the wrong task is being
checked for capabilities.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Pull smack updates from James Morris:
"Minor fixes from Piotr Sawicki"
* 'next-smack' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
Smack: Inform peer that IPv6 traffic has been blocked
Smack: Check UDP-Lite and DCCP protocols during IPv6 handling
Smack: Fix handling of IPv4 traffic received by PF_INET6 sockets
Pull vfs open-related updates from Al Viro:
- "do we need fput() or put_filp()" rules are gone - it's always fput()
now. We keep track of that state where it belongs - in ->f_mode.
- int *opened mess killed - in finish_open(), in ->atomic_open()
instances and in fs/namei.c code around do_last()/lookup_open()/atomic_open().
- alloc_file() wrappers with saner calling conventions are introduced
(alloc_file_clone() and alloc_file_pseudo()); callers converted, with
much simplification.
- while we are at it, saner calling conventions for path_init() and
link_path_walk(), simplifying things inside fs/namei.c (both on
open-related paths and elsewhere).
* 'work.open3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (40 commits)
few more cleanups of link_path_walk() callers
allow link_path_walk() to take ERR_PTR()
make path_init() unconditionally paired with terminate_walk()
document alloc_file() changes
make alloc_file() static
do_shmat(): grab shp->shm_file earlier, switch to alloc_file_clone()
new helper: alloc_file_clone()
create_pipe_files(): switch the first allocation to alloc_file_pseudo()
anon_inode_getfile(): switch to alloc_file_pseudo()
hugetlb_file_setup(): switch to alloc_file_pseudo()
ocxlflash_getfile(): switch to alloc_file_pseudo()
cxl_getfile(): switch to alloc_file_pseudo()
... and switch shmem_file_setup() to alloc_file_pseudo()
__shmem_file_setup(): reorder allocations
new wrapper: alloc_file_pseudo()
kill FILE_{CREATED,OPENED}
switch atomic_open() and lookup_open() to returning 0 in all success cases
document ->atomic_open() changes
->atomic_open(): return 0 in all success cases
get rid of 'opened' in path_openat() and the helpers downstream
...
In this patch we're sending an ICMPv6 message to a peer to
immediately inform it that making a connection is not possible.
In case of TCP connections, without this change, the peer
will be waiting until a connection timeout is exceeded.
Signed-off-by: Piotr Sawicki <p.sawicki2@partner.samsung.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
The smack_socket_sock_rcv_skb() function is checking smack labels
only for UDP and TCP frames carried in IPv6 packets. From now on,
it is able also to handle UDP-Lite and DCCP protocols.
Signed-off-by: Piotr Sawicki <p.sawicki2@partner.samsung.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
A socket which has sk_family set to PF_INET6 is able to receive not
only IPv6 but also IPv4 traffic (IPv4-mapped IPv6 addresses).
Prior to this patch, the smk_skb_to_addr_ipv6() could have been
called for socket buffers containing IPv4 packets, in result such
traffic was allowed.
Signed-off-by: Piotr Sawicki <p.sawicki2@partner.samsung.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Smack: Mark inode instant in smack_task_to_inode
/proc clean-up in commit 1bbc55131e
resulted in smack_task_to_inode() being called before smack_d_instantiate.
This resulted in the smk_inode value being ignored, even while present
for files in /proc/self. Marking the inode as instant here fixes that.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Fix memory leak in smack_inode_getsecctx
The implementation of smack_inode_getsecctx() made
incorrect assumptions about how Smack presents a security
context. Smack does not need to allocate memory to support
security contexts, so "releasing" a Smack context is a no-op.
The code made an unnecessary copy and returned that as a
context, which was never freed. The revised implementation
returns the context correctly.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reported-by: CHANDAN VN <chandan.vn@samsung.com>
Tested-by: CHANDAN VN <chandan.vn@samsung.com>
Make sure to implement the new socketpair callback so the SO_PEERSEC
call on socketpair(2)s will return correct information.
Signed-off-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
There is a permission discrepancy when consulting msq ipc object
metadata between /proc/sysvipc/msg (0444) and the MSG_STAT shmctl
command. The later does permission checks for the object vs S_IRUGO.
As such there can be cases where EACCESS is returned via syscall but the
info is displayed anyways in the procfs files.
While this might have security implications via info leaking (albeit no
writing to the msq metadata), this behavior goes way back and showing
all the objects regardless of the permissions was most likely an
overlook - so we are stuck with it. Furthermore, modifying either the
syscall or the procfs file can cause userspace programs to break (ie
ipcs). Some applications require getting the procfs info (without root
privileges) and can be rather slow in comparison with a syscall -- up to
500x in some reported cases for shm.
This patch introduces a new MSG_STAT_ANY command such that the msq ipc
object permissions are ignored, and only audited instead. In addition,
I've left the lsm security hook checks in place, as if some policy can
block the call, then the user has no other choice than just parsing the
procfs file.
Link: http://lkml.kernel.org/r/20180215162458.10059-4-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reported-by: Robert Kettler <robert.kettler@outlook.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is a permission discrepancy when consulting shm ipc object
metadata between /proc/sysvipc/sem (0444) and the SEM_STAT semctl
command. The later does permission checks for the object vs S_IRUGO.
As such there can be cases where EACCESS is returned via syscall but the
info is displayed anyways in the procfs files.
While this might have security implications via info leaking (albeit no
writing to the sma metadata), this behavior goes way back and showing
all the objects regardless of the permissions was most likely an
overlook - so we are stuck with it. Furthermore, modifying either the
syscall or the procfs file can cause userspace programs to break (ie
ipcs). Some applications require getting the procfs info (without root
privileges) and can be rather slow in comparison with a syscall -- up to
500x in some reported cases for shm.
This patch introduces a new SEM_STAT_ANY command such that the sem ipc
object permissions are ignored, and only audited instead. In addition,
I've left the lsm security hook checks in place, as if some policy can
block the call, then the user has no other choice than just parsing the
procfs file.
Link: http://lkml.kernel.org/r/20180215162458.10059-3-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reported-by: Robert Kettler <robert.kettler@outlook.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "sysvipc: introduce STAT_ANY commands", v2.
The following patches adds the discussed (see [1]) new command for shm
as well as for sems and msq as they are subject to the same
discrepancies for ipc object permission checks between the syscall and
via procfs. These new commands are justified in that (1) we are stuck
with this semantics as changing syscall and procfs can break userland;
and (2) some users can benefit from performance (for large amounts of
shm segments, for example) from not having to parse the procfs
interface.
Once merged, I will submit the necesary manpage updates. But I'm thinking
something like:
: diff --git a/man2/shmctl.2 b/man2/shmctl.2
: index 7bb503999941..bb00bbe21a57 100644
: --- a/man2/shmctl.2
: +++ b/man2/shmctl.2
: @@ -41,6 +41,7 @@
: .\" 2005-04-25, mtk -- noted aberrant Linux behavior w.r.t. new
: .\" attaches to a segment that has already been marked for deletion.
: .\" 2005-08-02, mtk: Added IPC_INFO, SHM_INFO, SHM_STAT descriptions.
: +.\" 2018-02-13, dbueso: Added SHM_STAT_ANY description.
: .\"
: .TH SHMCTL 2 2017-09-15 "Linux" "Linux Programmer's Manual"
: .SH NAME
: @@ -242,6 +243,18 @@ However, the
: argument is not a segment identifier, but instead an index into
: the kernel's internal array that maintains information about
: all shared memory segments on the system.
: +.TP
: +.BR SHM_STAT_ANY " (Linux-specific)"
: +Return a
: +.I shmid_ds
: +structure as for
: +.BR SHM_STAT .
: +However, the
: +.I shm_perm.mode
: +is not checked for read access for
: +.IR shmid ,
: +resembing the behaviour of
: +/proc/sysvipc/shm.
: .PP
: The caller can prevent or allow swapping of a shared
: memory segment with the following \fIcmd\fP values:
: @@ -287,7 +300,7 @@ operation returns the index of the highest used entry in the
: kernel's internal array recording information about all
: shared memory segments.
: (This information can be used with repeated
: -.B SHM_STAT
: +.B SHM_STAT/SHM_STAT_ANY
: operations to obtain information about all shared memory segments
: on the system.)
: A successful
: @@ -328,7 +341,7 @@ isn't accessible.
: \fIshmid\fP is not a valid identifier, or \fIcmd\fP
: is not a valid command.
: Or: for a
: -.B SHM_STAT
: +.B SHM_STAT/SHM_STAT_ANY
: operation, the index value specified in
: .I shmid
: referred to an array slot that is currently unused.
This patch (of 3):
There is a permission discrepancy when consulting shm ipc object metadata
between /proc/sysvipc/shm (0444) and the SHM_STAT shmctl command. The
later does permission checks for the object vs S_IRUGO. As such there can
be cases where EACCESS is returned via syscall but the info is displayed
anyways in the procfs files.
While this might have security implications via info leaking (albeit no
writing to the shm metadata), this behavior goes way back and showing all
the objects regardless of the permissions was most likely an overlook - so
we are stuck with it. Furthermore, modifying either the syscall or the
procfs file can cause userspace programs to break (ie ipcs). Some
applications require getting the procfs info (without root privileges) and
can be rather slow in comparison with a syscall -- up to 500x in some
reported cases.
This patch introduces a new SHM_STAT_ANY command such that the shm ipc
object permissions are ignored, and only audited instead. In addition,
I've left the lsm security hook checks in place, as if some policy can
block the call, then the user has no other choice than just parsing the
procfs file.
[1] https://lkml.org/lkml/2017/12/19/220
Link: http://lkml.kernel.org/r/20180215162458.10059-2-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Robert Kettler <robert.kettler@outlook.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull integrity updates from James Morris:
"A mixture of bug fixes, code cleanup, and continues to close
IMA-measurement, IMA-appraisal, and IMA-audit gaps.
Also note the addition of a new cred_getsecid LSM hook by Matthew
Garrett:
For IMA purposes, we want to be able to obtain the prepared secid
in the bprm structure before the credentials are committed. Add a
cred_getsecid hook that makes this possible.
which is used by a new CREDS_CHECK target in IMA:
In ima_bprm_check(), check with both the existing process
credentials and the credentials that will be committed when the new
process is started. This will not change behaviour unless the
system policy is extended to include CREDS_CHECK targets -
BPRM_CHECK will continue to check the same credentials that it did
previously"
* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
ima: Fallback to the builtin hash algorithm
ima: Add smackfs to the default appraise/measure list
evm: check for remount ro in progress before writing
ima: Improvements in ima_appraise_measurement()
ima: Simplify ima_eventsig_init()
integrity: Remove unused macro IMA_ACTION_RULE_FLAGS
ima: drop vla in ima_audit_measurement()
ima: Fix Kconfig to select TPM 2.0 CRB interface
evm: Constify *integrity_status_msg[]
evm: Move evm_hmac and evm_hash from evm_main.c to evm_crypto.c
fuse: define the filesystem as untrusted
ima: fail signature verification based on policy
ima: clear IMA_HASH
ima: re-evaluate files on privileged mounted filesystems
ima: fail file signature verification on non-init mounted filesystems
IMA: Support using new creds in appraisal policy
security: Add a cred_getsecid hook
Pull smack update from James Morris:
"One small change for Automotive Grade Linux"
* 'next-smack' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
Smack: Handle CGROUP2 in the same way that CGROUP
Pull general security layer updates from James Morris:
- Convert security hooks from list to hlist, a nice cleanup, saving
about 50% of space, from Sargun Dhillon.
- Only pass the cred, not the secid, to kill_pid_info_as_cred and
security_task_kill (as the secid can be determined from the cred),
from Stephen Smalley.
- Close a potential race in kernel_read_file(), by making the file
unwritable before calling the LSM check (vs after), from Kees Cook.
* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
security: convert security hooks to use hlist
exec: Set file unwritable before LSM check
usb, signal, security: only pass the cred, not the secid, to kill_pid_info_as_cred and security_task_kill
Rename the variables shp, sma, msq to isp. As that is how the code already
refers to those variables.
Collapse smack_of_shm, smack_of_sem, and smack_of_msq into smack_of_ipc,
as the three functions had become completely identical.
Collapse smack_shm_alloc_security, smack_sem_alloc_security and
smack_msg_queue_alloc_security into smack_ipc_alloc_security as the three
functions had become identical.
Collapse smack_shm_free_security, smack_sem_free_security and
smack_msg_queue_free_security into smack_ipc_free_security as the
three functions had become identical.
Requested-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
For IMA purposes, we want to be able to obtain the prepared secid in the
bprm structure before the credentials are committed. Add a cred_getsecid
hook that makes this possible.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
All of the implementations of security hooks that take msg_queue only
access q_perm the struct kern_ipc_perm member. This means the
dependencies of the msg_queue security hooks can be simplified by
passing the kern_ipc_perm member of msg_queue.
Making this change will allow struct msg_queue to become private to
ipc/msg.c.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
All of the implementations of security hooks that take shmid_kernel only
access shm_perm the struct kern_ipc_perm member. This means the
dependencies of the shm security hooks can be simplified by passing
the kern_ipc_perm member of shmid_kernel..
Making this change will allow struct shmid_kernel to become private to ipc/shm.c.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
All of the implementations of security hooks that take sem_array only
access sem_perm the struct kern_ipc_perm member. This means the
dependencies of the sem security hooks can be simplified by passing
the kern_ipc_perm member of sem_array.
Making this change will allow struct sem and struct sem_array
to become private to ipc/sem.c.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
commit d178bc3a70 ("user namespace: usb:
make usb urbs user namespace aware (v2)") changed kill_pid_info_as_uid
to kill_pid_info_as_cred, saving and passing a cred structure instead of
uids. Since the secid can be obtained from the cred, drop the secid fields
from the usb_dev_state and async structures, and drop the secid argument to
kill_pid_info_as_cred. Replace the secid argument to security_task_kill
with the cred. Update SELinux, Smack, and AppArmor to use the cred, which
avoids the need for Smack and AppArmor to use a secid at all in this hook.
Further changes to Smack might still be required to take full advantage of
this change, since it should now be possible to perform capability
checking based on the supplied cred. The changes to Smack and AppArmor
have only been compile-tested.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
The new file system CGROUP2 isn't actually handled
by smack. This changes makes Smack treat equally
CGROUP and CGROUP2 items.
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Smack: Privilege check on key operations
Operations on key objects are subjected to Smack policy
even if the process is privileged. This is inconsistent
with the general behavior of Smack and may cause issues
with authentication by privileged daemons. This patch
allows processes with CAP_MAC_OVERRIDE to access keys
even if the Smack rules indicate otherwise.
Reported-by: Jose Bollo <jobol@nonadev.net>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
This patch fixes the warning reported by smatch:
security/smack/smack_lsm.c:2872 smack_socket_connect() warn:
variable dereferenced before check 'sock->sk' (see line 2869)
Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Pull general security subsystem updates from James Morris:
"TPM (from Jarkko):
- essential clean up for tpm_crb so that ARM64 and x86 versions do
not distract each other as much as before
- /dev/tpm0 rejects now too short writes (shorter buffer than
specified in the command header
- use DMA-safe buffer in tpm_tis_spi
- otherwise mostly minor fixes.
Smack:
- base support for overlafs
Capabilities:
- BPRM_FCAPS fixes, from Richard Guy Briggs:
The audit subsystem is adding a BPRM_FCAPS record when auditing
setuid application execution (SYSCALL execve). This is not expected
as it was supposed to be limited to when the file system actually
had capabilities in an extended attribute. It lists all
capabilities making the event really ugly to parse what is
happening. The PATH record correctly records the setuid bit and
owner. Suppress the BPRM_FCAPS record on set*id.
TOMOYO:
- Y2038 timestamping fixes"
* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (28 commits)
MAINTAINERS: update the IMA, EVM, trusted-keys, encrypted-keys entries
Smack: Base support for overlayfs
MAINTAINERS: remove David Safford as maintainer for encrypted+trusted keys
tomoyo: fix timestamping for y2038
capabilities: audit log other surprising conditions
capabilities: fix logic for effective root or real root
capabilities: invert logic for clarity
capabilities: remove a layer of conditional logic
capabilities: move audit log decision to function
capabilities: use intuitive names for id changes
capabilities: use root_priveleged inline to clarify logic
capabilities: rename has_cap to has_fcap
capabilities: intuitive names for cap gain status
capabilities: factor out cap_bprm_set_creds privileged root
tpm, tpm_tis: use ARRAY_SIZE() to define TPM_HID_USR_IDX
tpm: fix duplicate inline declaration specifier
tpm: fix type of a local variables in tpm_tis_spi.c
tpm: fix type of a local variable in tpm2_map_command()
tpm: fix type of a local variable in tpm2_get_cc_attrs_tbl()
tpm-dev-common: Reject too short writes
...
Supply the Smack module hooks in support of overlayfs.
Ensure that the Smack label of new files gets the correct
value when a directory is transmuting. Original implementation
by Romanini Daniele, with a few tweaks added.
Signed-off-by: Romanini Daniele <daniele.romanini@aalto.fi>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
security_inode_getsecurity() provides the text string value
of a security attribute. It does not provide a "secctx".
The code in xattr_getsecurity() that calls security_inode_getsecurity()
and then calls security_release_secctx() happened to work because
SElinux and Smack treat the attribute and the secctx the same way.
It fails for cap_inode_getsecurity(), because that module has no
secctx that ever needs releasing. It turns out that Smack is the
one that's doing things wrong by not allocating memory when instructed
to do so by the "alloc" parameter.
The fix is simple enough. Change the security_release_secctx() to
kfree() because it isn't a secctx being returned by
security_inode_getsecurity(). Change Smack to allocate the string when
told to do so.
Note: this also fixes memory leaks for LSMs which implement
inode_getsecurity but not release_secctx, such as capabilities.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reported-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: stable@vger.kernel.org
Signed-off-by: James Morris <james.l.morris@oracle.com>
This removes the redundant pdeath_signal clearing in Smack: the check in
smack_bprm_committing_creds() matches the check in smack_bprm_set_creds()
(which used to be in the now-removed smack_bprm_securexec() hook) and
since secureexec is now being checked for clearing pdeath_signal, this
is redundant to the common exec code.
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
The Smack bprm_secureexec hook can be merged with the bprm_set_creds
hook since it's dealing with the same information, and all of the details
are finalized during the first call to the bprm_set_creds hook via
prepare_binprm() (subsequent calls due to binfmt_script, etc, are ignored
via bprm->called_set_creds).
Here, the test can just happen at the end of the bprm_set_creds hook,
and the bprm_secureexec hook can be dropped.
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
The cred_prepared bprm flag has a misleading name. It has nothing to do
with the bprm_prepare_cred hook, and actually tracks if bprm_set_creds has
been called. Rename this flag and improve its comment.
Cc: David Howells <dhowells@redhat.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: John Johansen <john.johansen@canonical.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
The check of S_ISSOCK() in smack_file_receive() is not
appropriate if the passed descriptor is a socket.
Reported-by: Stephen Smalley <sds@tyco.nsa.gov>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
smack_parse_opts_str() calls kfree(opts->mnt_opts) when kcalloc() for
opts->mnt_opts_flags failed. But it should not have called it because
security_free_mnt_opts() will call kfree(opts->mnt_opts).
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
fixes: 3bf2789cad ("smack: allow mount opts setting over filesystems with binary mount data")
Cc: Vivek Trivedi <t.vivek@samsung.com>
Cc: Amit Sahrawat <a.sahrawat@samsung.com>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Mark all of the registration hooks as __ro_after_init (via the
__lsm_ro_after_init macro).
Signed-off-by: James Morris <james.l.morris@oracle.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: Kees Cook <keescook@chromium.org>
Pull namespace updates from Eric Biederman:
"There is a lot here. A lot of these changes result in subtle user
visible differences in kernel behavior. I don't expect anything will
care but I will revert/fix things immediately if any regressions show
up.
From Seth Forshee there is a continuation of the work to make the vfs
ready for unpriviled mounts. We had thought the previous changes
prevented the creation of files outside of s_user_ns of a filesystem,
but it turns we missed the O_CREAT path. Ooops.
Pavel Tikhomirov and Oleg Nesterov worked together to fix a long
standing bug in the implemenation of PR_SET_CHILD_SUBREAPER where only
children that are forked after the prctl are considered and not
children forked before the prctl. The only known user of this prctl
systemd forks all children after the prctl. So no userspace
regressions will occur. Holding earlier forked children to the same
rules as later forked children creates a semantic that is sane enough
to allow checkpoing of processes that use this feature.
There is a long delayed change by Nikolay Borisov to limit inotify
instances inside a user namespace.
Michael Kerrisk extends the API for files used to maniuplate
namespaces with two new trivial ioctls to allow discovery of the
hierachy and properties of namespaces.
Konstantin Khlebnikov with the help of Al Viro adds code that when a
network namespace exits purges it's sysctl entries from the dcache. As
in some circumstances this could use a lot of memory.
Vivek Goyal fixed a bug with stacked filesystems where the permissions
on the wrong inode were being checked.
I continue previous work on ptracing across exec. Allowing a file to
be setuid across exec while being ptraced if the tracer has enough
credentials in the user namespace, and if the process has CAP_SETUID
in it's own namespace. Proc files for setuid or otherwise undumpable
executables are now owned by the root in the user namespace of their
mm. Allowing debugging of setuid applications in containers to work
better.
A bug I introduced with permission checking and automount is now
fixed. The big change is to mark the mounts that the kernel initiates
as a result of an automount. This allows the permission checks in sget
to be safely suppressed for this kind of mount. As the permission
check happened when the original filesystem was mounted.
Finally a special case in the mount namespace is removed preventing
unbounded chains in the mount hash table, and making the semantics
simpler which benefits CRIU.
The vfs fix along with related work in ima and evm I believe makes us
ready to finish developing and merge fully unprivileged mounts of the
fuse filesystem. The cleanups of the mount namespace makes discussing
how to fix the worst case complexity of umount. The stacked filesystem
fixes pave the way for adding multiple mappings for the filesystem
uids so that efficient and safer containers can be implemented"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
proc/sysctl: Don't grab i_lock under sysctl_lock.
vfs: Use upper filesystem inode in bprm_fill_uid()
proc/sysctl: prune stale dentries during unregistering
mnt: Tuck mounts under others instead of creating shadow/side mounts.
prctl: propagate has_child_subreaper flag to every descendant
introduce the walk_process_tree() helper
nsfs: Add an ioctl() to return owner UID of a userns
fs: Better permission checking for submounts
exit: fix the setns() && PR_SET_CHILD_SUBREAPER interaction
vfs: open() with O_CREAT should not create inodes with unknown ids
nsfs: Add an ioctl() to return the namespace type
proc: Better ownership of files for non-dumpable tasks in user namespaces
exec: Remove LSM_UNSAFE_PTRACE_CAP
exec: Test the ptracer's saved cred to see if the tracee can gain caps
exec: Don't reset euid and egid when the tracee has CAP_SETUID
inotify: Convert to using per-namespace limits
With previous changes every location that tests for
LSM_UNSAFE_PTRACE_CAP also tests for LSM_UNSAFE_PTRACE making the
LSM_UNSAFE_PTRACE_CAP redundant, so remove it.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
I am still tired of having to find indirect ways to determine
what security modules are active on a system. I have added
/sys/kernel/security/lsm, which contains a comma separated
list of the active security modules. No more groping around
in /proc/filesystems or other clever hacks.
Unchanged from previous versions except for being updated
to the latest security next branch.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: John Johansen <john.johansen@canonical.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <james.l.morris@oracle.com>
As reported by yangshukui, a permission denial from security_task_wait()
can lead to a soft lockup in zap_pid_ns_processes() since it only expects
sys_wait4() to return 0 or -ECHILD. Further, security_task_wait() can
in general lead to zombies; in the absence of some way to automatically
reparent a child process upon a denial, the hook is not useful. Remove
the security hook and its implementations in SELinux and Smack. Smack
already removed its check from its hook.
Reported-by: yangshukui <yangshukui@huawei.com>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The access to fd from anon_inode is always failed because there is
no set xattr operations. So this patch fixes to ignore private
inode including anon_inode for file functions.
It was only ignored for smack_file_receive() to share dma-buf fd,
but dma-buf has other functions like ioctl and mmap.
Reference: https://lkml.org/lkml/2015/4/17/16
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Since 4b936885a (v2.6.32) all inodes on sockfs and pipefs are disconnected.
It caused filesystem specific code in smack_d_instantiate to be skipped,
because all inodes on those pseudo filesystems were treated as root inodes.
As a result all sockfs inodes had the Smack label set to floor.
In most cases access checks for sockets use socket_smack data so the inode
label is not important. But there are special cases that were broken.
One example would be calling fcntl with F_SETOWN command on a socket fd.
Now smack_d_instantiate expects all pipefs and sockfs inodes to be
disconnected and has the logic in appropriate place.
Signed-off-by: Rafal Krypa <r.krypa@samsung.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
smack_file_open() is first checking the capability of calling subject,
this check will skip the SMACK logging for success case. Use smk_tskacc()
for proper logging and SMACK access check.
Signed-off-by: Himanshu Shukla <himanshu.sh@samsung.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
In smack_from_secattr function,"smack_known_list" is being traversed
using list_for_each_entry macro, although it is a rcu protected
structure. So it should be traversed using "list_for_each_entry_rcu"
macro to fetch the rcu protected entry.
Signed-off-by: Vishal Goel <vishal.goel@samsung.com>
Signed-off-by: Himanshu Shukla <himanshu.sh@samsung.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
There is race condition issue while freeing the i_security blob in SMACK
module. There is existing condition where i_security can be freed while
inode_permission is called from path lookup on second CPU. There has been
observed the page fault with such condition. VFS code and Selinux module
takes care of this condition by freeing the inode and i_security field
using RCU via call_rcu(). But in SMACK directly the i_secuirty blob is
being freed. Use call_rcu() to fix this race condition issue.
Signed-off-by: Himanshu Shukla <himanshu.sh@samsung.com>
Signed-off-by: Vishal Goel <vishal.goel@samsung.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
smk_copy_rules() and smk_copy_relabel() are initializing list_head though
they have been initialized already in new_task_smack() function. Delete
repeated initialization.
Signed-off-by: Himanshu Shukla <himanshu.sh@samsung.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Fix the issue of wrong SMACK label (SMACK64IPIN) update when a second bind
call is made to same IP address & port, but with different SMACK label
(SMACK64IPIN) by second instance of server. In this case server returns
with "Bind:Address already in use" error but before returning, SMACK label
is updated in SMACK port-label mapping list inside smack_socket_bind() hook
To fix this issue a new check has been added in smk_ipv6_port_label()
function before updating the existing port entry. It checks whether the
socket for matching port entry is closed or not. If it is closed then it
means port is not bound and it is safe to update the existing port entry
else return if port is still getting used. For checking whether socket is
closed or not, one more field "smk_can_reuse" has been added in the
"smk_port_label" structure. This field will be set to '1' in
"smack_sk_free_security()" function which is called to free the socket
security blob when the socket is being closed. In this function, port entry
is searched in the SMACK port-label mapping list for the closing socket.
If entry is found then "smk_can_reuse" field is set to '1'.Initially
"smk_can_reuse" field is set to '0' in smk_ipv6_port_label() function after
creating a new entry in the list which indicates that socket is in use.
Signed-off-by: Vishal Goel <vishal.goel@samsung.com>
Signed-off-by: Himanshu Shukla <himanshu.sh@samsung.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Permission denied error comes when 2 IPv6 servers are running and client
tries to connect one of them. Scenario is that both servers are using same
IP and port but different protocols(Udp and tcp). They are using different
SMACK64IPIN labels.Tcp server is using "test" and udp server is using
"test-in". When we try to run tcp client with SMACK64IPOUT label as "test",
then connection denied error comes. It should not happen since both tcp
server and client labels are same.This happens because there is no check
for protocol in smk_ipv6_port_label() function while searching for the
earlier port entry. It checks whether there is an existing port entry on
the basis of port only. So it updates the earlier port entry in the list.
Due to which smack label gets changed for earlier entry in the
"smk_ipv6_port_list" list and permission denied error comes.
Now a check is added for socket type also.Now if 2 processes use same
port but different protocols (tcp or udp), then 2 different port entries
will be added in the list. Similarly while checking smack access in
smk_ipv6_port_check() function, port entry is searched on the basis of
both port and protocol.
Signed-off-by: Vishal Goel <vishal.goel@samsung.com>
Signed-off-by: Himanshu Shukla <Himanshu.sh@samsung.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Add the rcu synchronization mechanism for accessing smk_ipv6_port_list
in smack IPv6 hooks. Access to the port list is vulnerable to a race
condition issue,it does not apply proper synchronization methods while
working on critical section. It is possible that when one thread is
reading the list, at the same time another thread is modifying the
same port list, which can cause the major problems.
To ensure proper synchronization between two threads, rcu mechanism
has been applied while accessing and modifying the port list. RCU will
also not affect the performance, as there are more accesses than
modification where RCU is most effective synchronization mechanism.
Signed-off-by: Vishal Goel <vishal.goel@samsung.com>
Signed-off-by: Himanshu Shukla <himanshu.sh@samsung.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Processes can only alter their own security attributes via
/proc/pid/attr nodes. This is presently enforced by each individual
security module and is also imposed by the Linux credentials
implementation, which only allows a task to alter its own credentials.
Move the check enforcing this restriction from the individual
security modules to proc_pid_attr_write() before calling the security hook,
and drop the unnecessary task argument to the security hook since it can
only ever be the current task.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Pull vfs updates from Al Viro:
- more ->d_init() stuff (work.dcache)
- pathname resolution cleanups (work.namei)
- a few missing iov_iter primitives - copy_from_iter_full() and
friends. Either copy the full requested amount, advance the iterator
and return true, or fail, return false and do _not_ advance the
iterator. Quite a few open-coded callers converted (and became more
readable and harder to fuck up that way) (work.iov_iter)
- several assorted patches, the big one being logfs removal
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
logfs: remove from tree
vfs: fix put_compat_statfs64() does not handle errors
namei: fold should_follow_link() with the step into not-followed link
namei: pass both WALK_GET and WALK_MORE to should_follow_link()
namei: invert WALK_PUT logics
namei: shift interpretation of LOOKUP_FOLLOW inside should_follow_link()
namei: saner calling conventions for mountpoint_last()
namei.c: get rid of user_path_parent()
switch getfrag callbacks to ..._full() primitives
make skb_add_data,{_nocache}() and skb_copy_to_page_nocache() advance only on success
[iov_iter] new primitives - copy_from_iter_full() and friends
don't open-code file_inode()
ceph: switch to use of ->d_init()
ceph: unify dentry_operations instances
lustre: switch to use of ->d_init()
The invalid Smack label ("") and the Huh ("?") Smack label
serve the same purpose and having both is unnecessary.
While pulling out the invalid label it became clear that
the use of smack_from_secid() was inconsistent, so that
is repaired. The setting of inode labels to the invalid
label could never happen in a functional system, has
never been observed in the wild and is not what you'd
really want for a failure behavior in any case. That is
removed.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Since smack_parse_opts_str() is calling match_strdup() which uses
GFP_KERNEL, it is safe to use GFP_KERNEL from kcalloc() which is
called by smack_parse_opts_str().
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
The check for a deleted entry in the list of IPv6 host
addresses was being performed in the wrong place, leading
to most peculiar results in some cases. This puts the
check into the right place.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Memory leak in smack_cred_prepare()function.
smack_cred_prepare() hook returns error if there is error in allocating
memory in smk_copy_rules() or smk_copy_relabel() function.
If smack_cred_prepare() function returns error then the calling
function should call smack_cred_free() function for cleanup.
In smack_cred_free() function first credential is extracted and
then all rules are deleted. In smack_cred_prepare() function security
field is assigned in the end when all function return success. But this
function may return before and memory will not be freed.
Signed-off-by: Himanshu Shukla <himanshu.sh@samsung.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Smack prohibits processes from using the star ("*") and web ("@") labels.
Checks have been added in other functions. In smack_setprocattr()
hook, only check for web ("@") label has been added and restricted
from applying web ("@") label.
Check for star ("*") label should also be added in smack_setprocattr()
hook. Return error should be "-EINVAL" not "-EPERM" as permission
is there for setting label but not the label value as star ("*") or
web ("@").
Signed-off-by: Himanshu Shukla <himanshu.sh@samsung.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
In smack_set_mnt_opts()first the SMACK mount options are being
parsed and later it is being checked whether the user calling
mount has CAP_MAC_ADMIN capability.
This sequence of operationis will allow unauthorized user to add
SMACK labels in label list and may cause denial of security attack
by adding many labels by allocating kernel memory by unauthorized user.
Superblock smack flag is also being set as initialized though function
may return with EPERM error.
First check the capability of calling user then set the SMACK attributes
and smk_flags.
Signed-off-by: Himanshu Shukla <himanshu.sh@samsung.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Assign smack_known_web label for kernel thread's socket
Creating struct sock by sk_alloc function in various kernel subsystems
like bluetooth doesn't call smack_socket_post_create(). In such case,
received sock label is the floor('_') label and makes access deny.
Signed-off-by: jooseong lee <jooseong.lee@samsung.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Pull vfs xattr updates from Al Viro:
"xattr stuff from Andreas
This completes the switch to xattr_handler ->get()/->set() from
->getxattr/->setxattr/->removexattr"
* 'work.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: Remove {get,set,remove}xattr inode operations
xattr: Stop calling {get,set,remove}xattr inode operations
vfs: Check for the IOP_XATTR flag in listxattr
xattr: Add __vfs_{get,set,remove}xattr helpers
libfs: Use IOP_XATTR flag for empty directory handling
vfs: Use IOP_XATTR flag for bad-inode handling
vfs: Add IOP_XATTR inode operations flag
vfs: Move xattr_resolve_name to the front of fs/xattr.c
ecryptfs: Switch to generic xattr handlers
sockfs: Get rid of getxattr iop
sockfs: getxattr: Fail with -EOPNOTSUPP for invalid attribute names
kernfs: Switch to generic xattr handlers
hfs: Switch to generic xattr handlers
jffs2: Remove jffs2_{get,set,remove}xattr macros
xattr: Remove unnecessary NULL attribute name check
Right now, various places in the kernel check for the existence of
getxattr, setxattr, and removexattr inode operations and directly call
those operations. Switch to helper functions and test for the IOP_XATTR
flag instead.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Under a strict subject/object security policy delivering a
signal or delivering network IPC could be considered either
a write or an append operation. The original choice to make
both write operations leads to an issue where IPC delivery
is desired under policy, but delivery of signals is not.
This patch provides the option of making signal delivery
an append operation, allowing Smack rules that deny signal
delivery while allowing IPC. This was requested for Tizen.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Pull security subsystem updates from James Morris:
"Highlights:
- TPM core and driver updates/fixes
- IPv6 security labeling (CALIPSO)
- Lots of Apparmor fixes
- Seccomp: remove 2-phase API, close hole where ptrace can change
syscall #"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (156 commits)
apparmor: fix SECURITY_APPARMOR_HASH_DEFAULT parameter handling
tpm: Add TPM 2.0 support to the Nuvoton i2c driver (NPCT6xx family)
tpm: Factor out common startup code
tpm: use devm_add_action_or_reset
tpm2_i2c_nuvoton: add irq validity check
tpm: read burstcount from TPM_STS in one 32-bit transaction
tpm: fix byte-order for the value read by tpm2_get_tpm_pt
tpm_tis_core: convert max timeouts from msec to jiffies
apparmor: fix arg_size computation for when setprocattr is null terminated
apparmor: fix oops, validate buffer size in apparmor_setprocattr()
apparmor: do not expose kernel stack
apparmor: fix module parameters can be changed after policy is locked
apparmor: fix oops in profile_unpack() when policy_db is not present
apparmor: don't check for vmalloc_addr if kvzalloc() failed
apparmor: add missing id bounds check on dfa verification
apparmor: allow SYS_CAP_RESOURCE to be sufficient to prlimit another task
apparmor: use list_next_entry instead of list_entry_next
apparmor: fix refcount race when finding a child profile
apparmor: fix ref count leak when profile sha1 hash is read
apparmor: check that xindex is in trans_table bounds
...
This makes it possible to route the error to the appropriate
labelling engine. CALIPSO is far less verbose than CIPSO
when encountering a bogus packet, so there is no need for a
CALIPSO error handler.
Signed-off-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The SMACK64, SMACK64EXEC, and SMACK64MMAP labels are all handled
differently in untrusted mounts. This is confusing and
potentically problematic. Change this to handle them all the same
way that SMACK64 is currently handled; that is, read the label
from disk and check it at use time. For SMACK64 and SMACK64MMAP
access is denied if the label does not match smk_root. To be
consistent with suid, a SMACK64EXEC label which does not match
smk_root will still allow execution of the file but will not run
with the label supplied in the xattr.
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Security labels from unprivileged mounts cannot be trusted.
Ideally for these mounts we would assign the objects in the
filesystem the same label as the inode for the backing device
passed to mount. Unfortunately it's currently impossible to
determine which inode this is from the LSM mount hooks, so we
settle for the label of the process doing the mount.
This label is assigned to s_root, and also to smk_default to
ensure that new inodes receive this label. The transmute property
is also set on s_root to make this behavior more explicit, even
though it is technically not necessary.
If a filesystem has existing security labels, access to inodes is
permitted if the label is the same as smk_root, otherwise access
is denied. The SMACK64EXEC xattr is completely ignored.
Explicit setting of security labels continues to require
CAP_MAC_ADMIN in init_user_ns.
Altogether, this ensures that filesystem objects are not
accessible to subjects which cannot already access the backing
store, that MAC is not violated for any objects in the fileystem
which are already labeled, and that a user cannot use an
unprivileged mount to gain elevated MAC privileges.
sysfs, tmpfs, and ramfs are already mountable from user
namespaces and support security labels. We can't rule out the
possibility that these filesystems may already be used in mounts
from user namespaces with security lables set from the init
namespace, so failing to trust lables in these filesystems may
introduce regressions. It is safe to trust labels from these
filesystems, since the unprivileged user does not control the
backing store and thus cannot supply security labels, so an
explicit exception is made to trust labels from these
filesystems.
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Kill with signal number 0 is commonly used for checking PID existence.
Smack treated such cases like any other kills, although no signal is
actually delivered when sig == 0.
Checking permissions when sig == 0 didn't prevent an unprivileged caller
from learning whether PID exists or not. When it existed, kernel returned
EPERM, when it didn't - ESRCH. The only effect of policy check in such
case is noise in audit logs.
This change lets Smack silently ignore kill() invocations with sig == 0.
Signed-off-by: Rafal Krypa <r.krypa@samsung.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
smack ->d_instantiate() uses ->setxattr(), so to be able to call it before
we'd hashed the new dentry and attached it to inode, we need ->setxattr()
instances getting the inode as an explicit argument rather than obtaining
it from dentry.
Similar change for ->getxattr() had been done in commit ce23e64. Unlike
->getxattr() (which is used by both selinux and smack instances of
->d_instantiate()) ->setxattr() is used only by smack one and unfortunately
it got missed back then.
Reported-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Tested-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Before this commit, removing the access property of
a file, aka, the extended attribute security.SMACK64
was not effictive until the cache had been cleaned.
This patch fixes that problem.
Signed-off-by: José Bollo <jobol@nonadev.net>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Prior to the 4.2 kernel there no no harm in providing
a security module hook that does nothing, as the default
hook would get called if the module did not supply one.
With the list based infrastructure an empty hook adds
overhead. This patch removes the three Smack hooks that
don't actually do anything.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
It looks like smack and yama weren't aware that the ptrace mode
can have flags ORed into it - PTRACE_MODE_NOAUDIT until now, but
only for /proc/$pid/stat, and with the PTRACE_MODE_*CREDS patch,
all modes have flags ORed into them.
Signed-off-by: Jann Horn <jann@thejh.net>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: "Serge E. Hallyn" <serge.hallyn@ubuntu.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull security subsystem updates from James Morris:
- EVM gains support for loading an x509 cert from the kernel
(EVM_LOAD_X509), into the EVM trusted kernel keyring.
- Smack implements 'file receive' process-based permission checking for
sockets, rather than just depending on inode checks.
- Misc enhancments for TPM & TPM2.
- Cleanups and bugfixes for SELinux, Keys, and IMA.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (41 commits)
selinux: Inode label revalidation performance fix
KEYS: refcount bug fix
ima: ima_write_policy() limit locking
IMA: policy can be updated zero times
selinux: rate-limit netlink message warnings in selinux_nlmsg_perm()
selinux: export validatetrans decisions
gfs2: Invalid security labels of inodes when they go invalid
selinux: Revalidate invalid inode security labels
security: Add hook to invalidate inode security labels
selinux: Add accessor functions for inode->i_security
security: Make inode argument of inode_getsecid non-const
security: Make inode argument of inode_getsecurity non-const
selinux: Remove unused variable in selinux_inode_init_security
keys, trusted: seal with a TPM2 authorization policy
keys, trusted: select hash algorithm for TPM2 chips
keys, trusted: fix: *do not* allow duplicate key options
tpm_ibmvtpm: properly handle interrupted packet receptions
tpm_tis: Tighten IRQ auto-probing
tpm_tis: Refactor the interrupt setup
tpm_tis: Get rid of the duplicate IRQ probing code
...
Make the inode argument of the inode_getsecid hook non-const so that we
can use it to revalidate invalid security labels.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Make the inode argument of the inode_getsecurity hook non-const so that
we can use it to revalidate invalid security labels.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Smack security handler for sendmsg() syscall
is vulnerable to type confusion issue what
can allow to privilege escalation into root
or cause denial of service.
A malicious attacker can create socket of one
type for example AF_UNIX and pass is into
sendmsg() function ensuring that this is
AF_INET socket.
Remedy
Do not trust user supplied data.
Proposed fix below.
Signed-off-by: Roman Kubiak <r.kubiak@samsung.com>
Signed-off-by: Mateusz Fruba <m.fruba@samsung.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Add a nfs_listxattr operation. Move the call to security_inode_listsecurity
from list operation of the "security.*" xattr handler to nfs_listxattr.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Cc: linux-nfs@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The existing file receive hook checks for access on
the file inode even for UDS. This is not right, as
the inode is not used by Smack to make access checks
for sockets. This change checks for an appropriate
access relationship between the receiving (current)
process and the socket. If the process can't write
to the socket's send label or the socket's receive
label can't write to the process fail.
This will allow the legitimate cases, where the
socket sender and socket receiver can freely communicate.
Only strangly set socket labels should cause a problem.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
This feature introduces new kernel interface:
- <smack_fs>/relabel-self - for setting transition labels list
This list is used to control smack label transition mechanism.
List is set by, and per process. Process can transit to new label only if
label is on the list. Only process with CAP_MAC_ADMIN capability can add
labels to this list. With this list, process can change it's label without
CAP_MAC_ADMIN but only once. After label changing, list is unset.
Changes in v2:
* use list_for_each_entry instead of _rcu during label write
* added missing description in security/Smack.txt
Changes in v3:
* squashed into one commit
Changes in v4:
* switch from global list to per-task list
* since the per-task list is accessed only by the task itself
there is no need to use synchronization mechanisms on it
Changes in v5:
* change smackfs interface of relabel-self to the one used for onlycap
multiple labels are accepted, separated by space, which
replace the previous list upon write
Signed-off-by: Zbigniew Jasinski <z.jasinski@samsung.com>
Signed-off-by: Rafal Krypa <r.krypa@samsung.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
This fix writes the task label when
smack_d_instantiate is called, before the
label of the superblock was written on the
pipe's inode.
Signed-off-by: Roman Kubiak <r.kubiak@samsung.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
This change has two goals:
- delay the setting of 'smack_enabled' until
it will be really effective
- ensure that smackfs is valid only if 'smack_enabled'
is set (it is already the case in smack_netfilter.c)
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Fixes the following sparse warning:
security/smack/smack_lsm.c:55:1: warning: symbol 'smk_ipv6_port_list'
was not declared. Should it be static?
Signed-off-by: Geliang Tang <geliangtang@163.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
The changes for mounting binary filesystems was allied
improperly, with the list of tokens being in an ifdef that
it shouldn't have been. Fix that, and a couple style issues
that were bothering me.
Reported-by: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
The kbuild test robot reported a couple of these,
and the third showed up by inspection. Making the
symbols static is proper.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
IPv6 appears to be (finally) coming of age with the
influx of autonomous devices. In support of this, add
the ability to associate a Smack label with IPv6 addresses.
This patch also cleans up some of the conditional
compilation associated with the introduction of
secmark processing. It's now more obvious which bit
of code goes with which feature.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Add support for setting smack mount labels(using smackfsdef, smackfsroot,
smackfshat, smackfsfloor, smackfstransmute) for filesystems with binary
mount data like NFS.
To achieve this, implement sb_parse_opts_str and sb_set_mnt_opts security
operations in smack LSM similar to SELinux.
Signed-off-by: Vivek Trivedi <t.vivek@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
This patch makes the following functions to use ERR_PTR() and related
macros to pass the appropriate error code through returned pointers:
smk_parse_smack()
smk_import_entry()
smk_fetch()
It also makes all the other functions that use them to handle the
error cases properly. This ways correct error codes from places
where they happened can be propagated to the user space if necessary.
Doing this it fixes a bug in onlycap and unconfined files
handling. Previously their content was cleared on any error from
smk_import_entry/smk_parse_smack, be it EINVAL (as originally intended)
or ENOMEM. Right now it only reacts on EINVAL passing other codes
properly to userspace.
Comments have been updated accordingly.
Signed-off-by: Lukasz Pawelczyk <l.pawelczyk@samsung.com>
The dmabuf fd can be shared between processes via unix domain
socket. The file of dmabuf fd is came from anon_inode. The inode
has no set and get xattr operations, so it can not be shared
between processes with smack. This patch fixes just to ignore
private inode including anon_inode for smack_file_receive.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Instead of using a vector of security operations
with explicit, special case stacking of the capability
and yama hooks use lists of hooks with capability and
yama hooks included as appropriate.
The security_operations structure is no longer required.
Instead, there is a union of the function pointers that
allows all the hooks lists to use a common mechanism for
list management while retaining typing. Each module
supplies an array describing the hooks it provides instead
of a sparsely populated security_operations structure.
The description includes the element that gets put on
the hook list, avoiding the issues surrounding individual
element allocation.
The method for registering security modules is changed to
reflect the information available. The method for removing
a module, currently only used by SELinux, has also changed.
It should be generic now, however if there are potential
race conditions based on ordering of hook removal that needs
to be addressed by the calling module.
The security hooks are called from the lists and the first
failure is returned.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: John Johansen <john.johansen@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Add a list header for each security hook. They aren't used until
later in the patch series. They are grouped together in a structure
so that there doesn't need to be an external address for each.
Macro-ize the initialization of the security_operations
for each security module in anticipation of changing out
the security_operations structure.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: John Johansen <john.johansen@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Pull fourth vfs update from Al Viro:
"d_inode() annotations from David Howells (sat in for-next since before
the beginning of merge window) + four assorted fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
RCU pathwalk breakage when running into a symlink overmounting something
fix I_DIO_WAKEUP definition
direct-io: only inc/dec inode->i_dio_count for file systems
fs/9p: fix readdir()
VFS: assorted d_backing_inode() annotations
VFS: fs/inode.c helpers: d_inode() annotations
VFS: fs/cachefiles: d_backing_inode() annotations
VFS: fs library helpers: d_inode() annotations
VFS: assorted weird filesystems: d_inode() annotations
VFS: normal filesystems (and lustre): d_inode() annotations
VFS: security/: d_inode() annotations
VFS: security/: d_backing_inode() annotations
VFS: net/: d_inode() annotations
VFS: net/unix: d_backing_inode() annotations
VFS: kernel/: d_inode() annotations
VFS: audit: d_backing_inode() annotations
VFS: Fix up some ->d_inode accesses in the chelsio driver
VFS: Cachefiles should perform fs modifications on the top layer only
VFS: AF_UNIX sockets should call mknod on the top layer only
most of the ->d_inode uses there refer to the same inode IO would
go to, i.e. d_backing_inode()
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull security subsystem updates from James Morris:
"Highlights for this window:
- improved AVC hashing for SELinux by John Brooks and Stephen Smalley
- addition of an unconfined label to Smack
- Smack documentation update
- TPM driver updates"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (28 commits)
lsm: copy comm before calling audit_log to avoid race in string printing
tomoyo: Do not generate empty policy files
tomoyo: Use if_changed when generating builtin-policy.h
tomoyo: Use bin2c to generate builtin-policy.h
selinux: increase avtab max buckets
selinux: Use a better hash function for avtab
selinux: convert avtab hash table to flex_array
selinux: reconcile security_netlbl_secattr_to_sid() and mls_import_netlbl_cat()
selinux: remove unnecessary pointer reassignment
Smack: Updates for Smack documentation
tpm/st33zp24/spi: Add missing device table for spi phy.
tpm/st33zp24: Add proper wait for ordinal duration in case of irq mode
smack: Fix gcc warning from unused smack_syslog_lock mutex in smackfs.c
Smack: Allow an unconfined label in bringup mode
Smack: getting the Smack security context of keys
Smack: Assign smack_known_web as default smk_in label for kernel thread's socket
tpm/tpm_infineon: Use struct dev_pm_ops for power management
MAINTAINERS: Add Jason as designated reviewer for TPM
tpm: Update KConfig text to include TPM2.0 FIFO chips
tpm/st33zp24/dts/st33zp24-spi: Add dts documentation for st33zp24 spi phy
...
Gustavo A. R. Silva