Since commit 3bfe610669 ("io-wq: fork worker threads from original
task") stopped using PF_KTHREAD flag for the io_uring PF_IO_WORKER threads,
tomoyo_kernel_service() no longer needs to check PF_IO_WORKER flag.
(This is a 5.12+ patch. Please don't send to stable kernels.)
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
There is an assignment to io that is never read after the assignment,
the assignment is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As tasks always wait and kill their io-wq on exec/exit, files are of no
more concern to us, so we don't need to specifically cancel them by hand
in those cases. Moreover we should not, because io_match_task() looks at
req->task->files now, which is always true and so leads to extra
cancellations, that wasn't a case before per-task io-wq.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/0566c1de9b9dd417f5de345c817ca953580e0e2e.1616696997.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't forget about io_commit_cqring() + io_cqring_ev_posted() after
exit/exec cancelling timeouts. Both functions declared only after
io_kill_timeouts(), so to avoid tons of forward declarations move
it down.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/72ace588772c0f14834a6a4185d56c445a366fb4.1616696997.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 4db4b1a0d1.
The IO threads allow and handle SIGSTOP now, so don't special case them
anymore in task_set_jobctl_pending().
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 15b2219fac.
Before IO threads accepted signals, the freezer using take signals to wake
up an IO thread would cause them to loop without any way to clear the
pending signal. That is no longer the case, so stop special casing
PF_IO_WORKER in the freezer.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 6fb8f43ced.
The IO threads do allow signals now, including SIGSTOP, and we can allow
ptrace attach. Attaching won't reveal anything interesting for the IO
threads, but it will allow eg gdb to attach to a task with io_urings
and IO threads without complaining. And once attached, it will allow
the usual introspection into regular threads.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 5be28c8f85.
IO threads now take signals just fine, so there's no reason to limit them
specifically. Revert the change that prevented that from happening.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is racy - move the blocking into when the task is created and
we're marking it as PF_IO_WORKER anyway. The IO threads are now
prepared to handle signals like SIGSTOP as well, so clear that from
the mask to allow proper stopping of IO threads.
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We go through various hoops to disallow signals for the IO threads, but
there's really no reason why we cannot just allow them. The IO threads
never return to userspace like a normal thread, and hence don't go through
normal signal processing. Instead, just check for a pending signal as part
of the work loop, and call get_signal() to handle it for us if anything
is pending.
With that, we can support receiving signals, including special ones like
SIGSTOP.
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit a33df75c63 ("block: use an xarray for disk->part_tbl") drops the
check on max supported number of partitionsr, and allows partition with
bigger partition numbers to be added. However, ->bd_partno is defined as
u8, so partition index of xarray table may not match with ->bd_partno.
Then delete_partition() may delete one unmatched partition, and caused
use-after-free.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reported-by: syzbot+8fede7e30c7cee0de139@syzkaller.appspotmail.com
Fixes: a33df75c63 ("block: use an xarray for disk->part_tbl")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This contains a few tiny drivers and core fixes that have been
reported during this cycle.
- msm8939: Remove rpm-ids from non-RPM nodes
- core: Fix error return code of icc_link_destroy()
- core: Fix kerneldoc warning
Signed-off-by: Georgi Djakov <djakov@kernel.org>
-----BEGIN PGP SIGNATURE-----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=sVSJ
-----END PGP SIGNATURE-----
Merge tag 'icc-5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-linus
Georgi writes:
interconnect fixes for v5.12
This contains a few tiny drivers and core fixes that have been
reported during this cycle.
- msm8939: Remove rpm-ids from non-RPM nodes
- core: Fix error return code of icc_link_destroy()
- core: Fix kerneldoc warning
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: Fix kerneldoc warning
interconnect: core: fix error return code of icc_link_destroy()
interconnect: qcom: msm8939: remove rpm-ids from non-RPM nodes
Richard's fix addresses an errornously flipped flag.
All patches have been reviewed on the mailing list, and have been in the
last few linux-next releases (as part of my fixes branch) without issues.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRORt0E5Sb/c/mZMgkXxQAtim5VSwUCYF4PkAAKCRAXxQAtim5V
S/f/AP0dbguLsIwo8nFYsFi8xLlpodl/hD8ZC3+WEWYkbF0DtgEAuFhs4Oa2cUBo
4gnV+POdy0/UlIRz6z6aBfzsJTsJkg4=
=/Cw4
-----END PGP SIGNATURE-----
Merge tag 'fpga-fixes-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-linus
Moritz writes:
FPGA Manager fixes for 5.12
Richard's fix addresses an errornously flipped flag.
All patches have been reviewed on the mailing list, and have been in the
last few linux-next releases (as part of my fixes branch) without issues.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
* tag 'fpga-fixes-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga:
firmware: stratix10-svc: reset COMMAND_RECONFIG_FLAG_PARTIAL to 0
There were two problems (one of which could cause data corruption)
that were noticed with duplicate extents (ie reflink)
when debugging why various xfstests were being incorrectly skipped
(e.g. generic/138, generic/140, generic/142). First, we were not
updating the file size locally in the cache when extending a
file due to reflink (it would refresh after actimeo expires)
but xfstest was checking the size immediately which was still
0 so caused the test to be skipped. Second, we were setting
the target file size (which could shrink the file) in all cases
to the end of the reflinked range rather than only setting the
target file size when reflink would extend the file.
CC: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Make SMB2 not print out an error when an oplock break is received for an
unknown handle, similar to SMB1. The debug message which is printed for
these unknown handles may also be misleading, so fix that too.
The SMB2 lease break path is not affected by this patch.
Without this, a program which writes to a file from one thread, and
opens, reads, and writes the same file from another thread triggers the
below errors several times a minute when run against a Samba server
configured with "smb2 leases = no".
CIFS: VFS: \\192.168.0.1 No task to wake, unknown frame received! NumMids 2
00000000: 424d53fe 00000040 00000000 00000012 .SMB@...........
00000010: 00000001 00000000 ffffffff ffffffff ................
00000020: 00000000 00000000 00000000 00000000 ................
00000030: 00000000 00000000 00000000 00000000 ................
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
RHBZ: 1933527
Under SMB1 + POSIX, if an inode is reused on a server after we have read and
cached a part of a file, when we then open the new file with the
re-cycled inode there is a chance that we may serve the old data out of cache
to the application.
This only happens for SMB1 (deprecated) and when posix are used.
The simplest solution to avoid this race is to force a revalidate
on smb1-posix open.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
My recent fixes to cifsacl to maintain inherited ACEs had
regressed modefromsid when an older ACL already exists.
Found testing xfstest 495 with modefromsid mount option
Fixes: f506550889 ("cifs: Retain old ACEs when converting between mode bits and ACL")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Right now we're never calling get_signal() from PF_IO_WORKER threads, but
in preparation for doing so, don't handle a fatal signal for them. The
workers have state they need to cleanup when exiting, so just return
instead of calling do_exit() on their behalf. The threads themselves will
detect a fatal signal and do proper shutdown.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Fix DM core's zoned model and zone sectors checks.
- Fix spurious "detected capacity change" pr_info() when creating new
DM device.
- Fix DM ioctl out of bounds array access in handling of
DM_LIST_DEVICES_CMD when no devices exist.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmBeMf0THHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWlr1B/9Jh6YUtTe1dN5rCEPheikFwcsDgoYk
zfgeS57GHv/rzQ9hdVPBqHvc4ZjEZ7hLkV8Pa0eyyDnslwHfH/B8/38LVSdOe1QK
52787CXTAcBHjnEzGbs2TP2oGhHQ4rN9h6lMKzs3jcglWunutHKnesAXGC3yItsr
WzYzskiL/gpS+Px936JVVjJirzKFX1jnbXZ4BMq3/7vqu5DJ8M+2mrf4H1wxfIMP
NeV40j4vAkqJKbQyVFYfzRdXxP+FswR9kLHQv96RW0y98JDg7h5TtYGrAaRZdpRw
HQ+96/dZWyH2MpJ5nptSIVbU71u9EtLuRCa5HhB903p14NQsrR0qGBfc
=YT+2
-----END PGP SIGNATURE-----
Merge tag 'for-5.12/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM verity target's optional argument processing.
- Fix DM core's zoned model and zone sectors checks.
- Fix spurious "detected capacity change" pr_info() when creating new
DM device.
- Fix DM ioctl out of bounds array access in handling of
DM_LIST_DEVICES_CMD when no devices exist.
* tag 'for-5.12/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm ioctl: fix out of bounds array access when no devices
dm: don't report "detected capacity change" on device creation
dm table: Fix zoned model check and zone sectors check
dm verity: fix DM_VERITY_OPTS_MAX value
If there are not any dm devices, we need to zero the "dev" argument in
the first structure dm_name_list. However, this can cause out of
bounds write, because the "needed" variable is zero and len may be
less than eight.
Fix this bug by reporting DM_BUFFER_FULL_FLAG if the result buffer is
too small to hold the "nl->dev" value.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
- Make ACPICA use the same object cache consistently when allocating
and freeing objects (Vegard Nossum).
- Add a callback pointer removed inadvertently during the 5.11 cycle
to the ACPI backlight blacklist entry for Sony VPCEH3U1E (Chris
Chiu).
- Make the ACPI device enumeration core use IDA for creating names of
ACPI device objects with the same primary device ID to avoid using
duplicate device object names in some cases (Andy Shevchenko).
-----BEGIN PGP SIGNATURE-----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=Wi4B
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a memory management regression in ACPICA, repair an ACPI
blacklist entry damaged inadvertently during the 5.11 cycle and fix
the bookkeeping of devices with the same primary device ID in the ACPI
core.
Specifics:
- Make ACPICA use the same object cache consistently when allocating
and freeing objects (Vegard Nossum)
- Add a callback pointer removed inadvertently during the 5.11 cycle
to the ACPI backlight blacklist entry for Sony VPCEH3U1E (Chris
Chiu)
- Make the ACPI device enumeration core use IDA for creating names of
ACPI device objects with the same primary device ID to avoid using
duplicate device object names in some cases (Andy Shevchenko)"
* tag 'acpi-5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: Always create namespace nodes using acpi_ns_create_node()
ACPI: scan: Use unique number for instance_no
ACPI: video: Add missing callback back for Sony VPCEH3U1E
- Modify the runtime PM device suspend to avoid suspending
supplier devices before the consumer device's status changes
to RPM_SUSPENDED (Rafael Wysocki).
- Change the Energy Model code to prevent it from attempting to
create its main debugfs directory too early (Lukasz Luba).
-----BEGIN PGP SIGNATURE-----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=9csw
-----END PGP SIGNATURE-----
Merge tag 'pm-5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix an issue related to device links in the runtime PM framework
and debugfs usage in the Energy Model code.
Specifics:
- Modify the runtime PM device suspend to avoid suspending supplier
devices before the consumer device's status changes to
RPM_SUSPENDED (Rafael Wysocki)
- Change the Energy Model code to prevent it from attempting to
create its main debugfs directory too early (Lukasz Luba)"
* tag 'pm-5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: EM: postpone creating the debugfs dir till fs_initcall
PM: runtime: Defer suspending suppliers
Too many fixes have accumulated in the soc tree, so this is a fairly
large set. As usual, most of the fixes are for devicetree files, but
there are also notable code changes for imx and omap regressions as
well as some maintainer file updates.
imx:
- Fix an Ethernet issue on imx6ul-14x14-evk board that is caused by
independent PHY reset.
- Add missing `dma-coherent` property for LayerScape device trees to fix a
kernel BUG report.
- Use IRQCHIP_DECLARE for AVIC driver to fix a boot issue on i.MX25 with
fw_devlink=on.
- Add missing I2C pinctrl entry for imx8mp-phyboard-pollux-rdk board to
fix the broken I2C GPIO recovery support.
- Add `fsl,use-minimum-ecc` property for imx6ull-myir-mys-6ulx-eval
device tree to fix UBI filesystem mount failure.
at91:
- wrong phy address that blocks Ethernet use on boards with sama5d27 SoM1
- restrictive pin possibilities for sam9x60
omap:
- Fix ocp interconnect bus access error reporting for omap_l3_noc by
setting IRQF_NO_THREAD
- Fix changed mmc slot order regression by adding mmc aliases for am335x
- Fix dra7 reboot regression caused by invalid pcie reset map
- Fix smartreflex init regression caused by dropped legacy data
- Fix ti-sysc driver warning on unbind if reset is not deasserted
- Fix flakey reset deassert for dra7 iva
stm32:
- MAINTAINER file updates
broadcom:
- brcmstb SoC ID build fix
- MAINTAINER file updates
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=LBps
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Too many fixes have accumulated in the soc tree, so this is a fairly
large set. As usual, most of the fixes are for devicetree files, but
there are also notable code changes for imx and omap regressions as
well as some maintainer file updates.
imx:
- Fix an Ethernet issue on imx6ul-14x14-evk board that is caused by
independent PHY reset.
- Add missing `dma-coherent` property for LayerScape device trees to
fix a kernel BUG report.
- Use IRQCHIP_DECLARE for AVIC driver to fix a boot issue on i.MX25
with fw_devlink=on.
- Add missing I2C pinctrl entry for imx8mp-phyboard-pollux-rdk board
to fix the broken I2C GPIO recovery support.
- Add `fsl,use-minimum-ecc` property for imx6ull-myir-mys-6ulx-eval
device tree to fix UBI filesystem mount failure.
at91:
- wrong phy address that blocks Ethernet use on boards with sama5d27
SoM1
- restrictive pin possibilities for sam9x60
omap:
- Fix ocp interconnect bus access error reporting for omap_l3_noc by
setting IRQF_NO_THREAD
- Fix changed mmc slot order regression by adding mmc aliases for
am335x
- Fix dra7 reboot regression caused by invalid pcie reset map
- Fix smartreflex init regression caused by dropped legacy data
- Fix ti-sysc driver warning on unbind if reset is not deasserted
- Fix flakey reset deassert for dra7 iva
stm32:
- MAINTAINER file updates
broadcom:
- brcmstb SoC ID build fix
- MAINTAINER file updates"
* tag 'soc-fixes-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: Add Alain Volmat as STM32 I2C/SMBUS maintainer
MAINTAINERS: Remove Vincent Abriou for STM/STI DRM drivers.
MAINTAINERS: Update some st.com email addresses to foss.st.com
ARM: dts: imx6ull: fix ubi filesystem mount failed
ARM: imx6ul-14x14-evk: Do not reset the Ethernet PHYs independently
arm64: dts: imx8mp-phyboard-pollux-rdk: Add missing pinctrl entry
arm64: dts: ls1012a: mark crypto engine dma coherent
arm64: dts: ls1043a: mark crypto engine dma coherent
arm64: dts: ls1046a: mark crypto engine dma coherent
ARM: imx: avic: Convert to using IRQCHIP_DECLARE
ARM: dts: at91: sam9x60: fix mux-mask to match product's datasheet
ARM: dts: at91: sam9x60: fix mux-mask for PA7 so it can be set to A, B and C
ARM: dts: at91-sama5d27_som1: fix phy address to 7
soc: ti: omap-prm: Fix occasional abort on reset deassert for dra7 iva
bus: ti-sysc: Fix warning on unbind if reset is not deasserted
ARM: OMAP2+: Fix smartreflex init regression after dropping legacy data
soc: ti: omap-prm: Fix reboot issue with invalid pcie reset map for dra7
MAINTAINERS: rectify BROADCOM PMB (POWER MANAGEMENT BUS) DRIVER
ARM: dts: am33xx: add aliases for mmc interfaces
bus: omap_l3_noc: mark l3 irqs as IRQF_NO_THREAD
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYF37OgAKCRCAXGG7T9hj
vp8hAP4h7mvjfkntbFXagrJK9pi2xVC9d/YO5nfa8/K3LcGVnQD/fKcU9ggPN9vI
GLnhyprGLcCA4aTL6Ogb37o9fDd4Yws=
=joIg
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.12b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"This contains a small series with a more elegant fix of a problem
which was originally fixed in rc2"
* tag 'for-linus-5.12b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
Revert "xen: fix p2m size in dom0 for disabled memory hotplug case"
xen/x86: make XEN_BALLOON_MEMORY_HOTPLUG_LIMIT depend on MEMORY_HOTPLUG
msm:
- pll fixes
- shutdown hook fix
- runtime resume fix
- clear_oob fix
- kms locking fix
- display aux retry fix
rcar-du:
- warn_on in encoder init fix
etnaviv:
- Use FOLL_FORCE and FOLL_LONGTERM
i915:
- DisplayPort LTTPR fixes around link training and limiting it
according to supported spec version.
- Fix enabled_planes bitmask to really represent only logically
enabled planes.
- Fix DSS CTL registers for ICL DSI transcoders
- Fix the GT fence revocation runtime PM logic.
nouveau:
- cursor size regression fix
amdgpu:
- S0ix fixes
- Add PCI ID
- Polaris PCIe DPM fix
- Display fix for high refresh rate monitors
-----BEGIN PGP SIGNATURE-----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=S23m
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2021-03-26' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"As expected last week things were overly quiet so this week things
seem to have caught up. It still isn't too major.
msm and amdgpu lead the size here, the msm fixes are pretty varied
across the driver, the amdgpu one is mostly the S0ix fixes with some
other minor ones. Otherwise there are a few i915 fixes and one each
for nouveau, etnaviv and rcar-du.
msm:
- pll fixes
- shutdown hook fix
- runtime resume fix
- clear_oob fix
- kms locking fix
- display aux retry fix
rcar-du:
- warn_on in encoder init fix
etnaviv:
- Use FOLL_FORCE and FOLL_LONGTERM
i915:
- DisplayPort LTTPR fixes around link training and limiting it
according to supported spec version.
- Fix enabled_planes bitmask to really represent only logically
enabled planes.
- Fix DSS CTL registers for ICL DSI transcoders
- Fix the GT fence revocation runtime PM logic.
nouveau:
- cursor size regression fix
amdgpu:
- S0ix fixes
- Add PCI ID
- Polaris PCIe DPM fix
- Display fix for high refresh rate monitors"
* tag 'drm-fixes-2021-03-26' of git://anongit.freedesktop.org/drm/drm: (37 commits)
drm/nouveau/kms/nve4-nv108: Limit cursors to 128x128
drm/i915: Fix the GT fence revocation runtime PM logic
drm/amdgpu/display: restore AUX_DPHY_TX_CONTROL for DCN2.x
drm/amdgpu: Add additional Sienna Cichlid PCI ID
drm/amd/pm: workaround for audio noise issue
drm/i915/dsc: fix DSS CTL register usage for ICL DSI transcoders
drm/i915: Fix enabled_planes bitmask
drm/i915: Disable LTTPR support when the LTTPR rev < 1.4
drm/i915: Disable LTTPR support when the DPCD rev < 1.4
drm/i915/ilk-glk: Fix link training on links with LTTPRs
drm/msm/disp/dpu1: icc path needs to be set before dpu runtime resume
drm/amdgpu: skip kfd suspend/resume for S0ix
drm/amdgpu: drop S0ix checks around CG/PG in suspend
drm/amdgpu: skip CG/PG for gfx during S0ix
drm/amdgpu: update comments about s0ix suspend/resume
drm/amdgpu/swsmu: skip gfx cgpg on s0ix suspend
drm/amdgpu: re-enable suspend phase 2 for S0ix
drm/amdgpu: move s0ix check into amdgpu_device_ip_suspend_phase2 (v3)
drm/amdgpu: clean up non-DC suspend/resume handling
drm/amdgpu: don't evict vram on APUs for suspend to ram (v4)
...
Dan's address bounces, and has been bouncing for some time as he moved
to other projects.
I believe TI should be more careful with this, and should assign
alternate contacts for their drivers.
Anyway what we can do now is to remove the obsolete address.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The function names in the comment blocks for the functions
scaling_available_frequencies_show() and
scaling_boost_frequencies_show() do not match the actual names.
Fixes: 6f19efc0a1 ("cpufreq: Add boost frequency support in core")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The fix for XSA-365 zapped too many of the ->persistent_gnt[] entries.
Ones successfully obtained should not be overwritten, but instead left
for xen_blkbk_unmap_prepare() to pick up and put.
This is XSA-371.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Wei Liu <wl@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
This reverts commit 048eb908a1 ("soc: qcom-geni-se: Add interconnect
support to fix earlycon crash")
ICC core and platforms drivers supports sync_state feature, which
ensures that the default ICC BW votes from the bootloader is not
removed until all it's consumers are probes.
The proxy votes were needed in case other QUP child drivers
I2C, SPI probes before UART, they can turn off the QUP-CORE clock
which is shared resources for all QUP driver, this causes unclocked
access to HW from earlycon.
Given above support from ICC there is no longer need to maintain
proxy votes on QUP-CORE ICC node from QUP wrapper driver for early
console usecase, the default votes won't be removed until real
console is probed.
Cc: stable@vger.kernel.org
Fixes: 266cd33b59 ("interconnect: qcom: Ensure that the floor bandwidth value is enforced")
Fixes: 7d3b0b0d81 ("interconnect: qcom: Use icc_sync_state")
Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org>
Signed-off-by: Akash Asthana <akashast@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20210324101836.25272-2-rojay@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In host mode port connection status flag is "0" when loading
the driver. After loading the driver system asserts suspend
which is handled by "_dwc2_hcd_suspend()" function. Before
the system suspend the port connection status is "0". As
result need to check the "port_connect_status" if it is "0",
then skipping entering to suspend.
Cc: <stable@vger.kernel.org> # 5.2
Fixes: 6f6d70597c ("usb: dwc2: bus suspend/resume for hosts with DWC2_POWER_DOWN_PARAM_NONE")
Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
Link: https://lore.kernel.org/r/20210326102510.BDEDEA005D@mailhost.synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Increased the waiting timeout for HPRT0.PrtSusp register field
to be set, because on HiKey 960 board HPRT0.PrtSusp wasn't
generated with the existing timeout.
Cc: <stable@vger.kernel.org> # 4.18
Fixes: 22bb5cfdf1 ("usb: dwc2: Fix host exit from hibernation flow.")
Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/20210326102447.8F7FEA005D@mailhost.synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pinephone running on Allwinner A64 fails to suspend with USB devices
connected as reported by Bhushan Shah <bshah@kde.org>. Reverting
commit 5fbf7a2534 ("usb: musb: fix idling for suspend after
disconnect interrupt") fixes the issue.
Let's add suspend checks also for suspend after disconnect interrupt
quirk handling like we already do elsewhere.
Fixes: 5fbf7a2534 ("usb: musb: fix idling for suspend after disconnect interrupt")
Reported-by: Bhushan Shah <bshah@kde.org>
Tested-by: Bhushan Shah <bshah@kde.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210324071142.42264-1-tony@atomide.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The MediaTek 0.96 xHCI controller on some platforms does not
support bulk stream even HCCPARAMS says supporting, due to MaxPSASize
is set a default value 1 by mistake, here use XHCI_BROKEN_STREAMS
quirk to fix it.
Fixes: 94a631d91a ("usb: xhci-mtk: check hcc_params after adding primary hcd")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1616482975-17841-4-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ensure that dep->flags are cleared until after stop active transfers
is completed. Otherwise, the ENDXFER command will not be executed
during ep disable.
Fixes: f09ddcfcb8 ("usb: dwc3: gadget: Prevent EP queuing while stopping transfers")
Cc: stable <stable@vger.kernel.org>
Reported-and-tested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Link: https://lore.kernel.org/r/1616610664-16495-1-git-send-email-wcheng@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For AES256 encryption (GCM and CCM), we need to adjust the size of a few
fields to 32 bytes instead of 16 to accommodate the larger keys.
Also, the L value supplied to the key generator needs to be changed from
to 256 when these algorithms are used.
Keeping the ioctl struct for dumping keys of the same size for now.
Will send out a different patch for that one.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Steve French <stfrench@microsoft.com>
When executing the daemon test on Arm64 and x86 with Debian (Buster)
distro, both skip the test case with the log:
# ./perf test -v 76
76: daemon operations :
--- start ---
test child forked, pid 11687
test daemon list
trap: SIGINT: bad trap
./tests/shell/daemon.sh: 173: local: cpu-clock: bad variable name
test child finished with -2
---- end ----
daemon operations: Skip
So the error happens for the variable expansion when use local variable
in the shell script. Since Debian Buster uses dash but not bash as
non-interactive shell, when execute the daemon testing, it hits a known
issue for dash which was reported [1].
To resolve this issue, one option is to add double quotes for all local
variables assignment, so need to change the code from:
local line=`perf daemon --config ${config} -x: | head -2 | tail -1`
... to:
local line="`perf daemon --config ${config} -x: | head -2 | tail -1`"
But the testing script has bunch of local variables, this leads to big
changes for whole script.
On the other hand, the testing script asks to use the "local" feature
which is bash-specific, so this patch explicitly uses "#!/bin/bash" to
ensure running the script with bash.
After:
# ./perf test -v 76
76: daemon operations :
--- start ---
test child forked, pid 11329
test daemon list
test daemon reconfig
test daemon stop
test daemon signal
signal 12 sent to session 'test [11596]'
signal 12 sent to session 'test [11596]'
test daemon ping
test daemon lock
test child finished with 0
---- end ----
daemon operations: Ok
[1] https://bugs.launchpad.net/ubuntu/+source/dash/+bug/139097
Fixes: 2291bb915b ("perf tests: Add daemon 'list' command test")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210320104554.529213-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
H_PROTECT expects the flag value to include flags:
AVPN, pp0, pp1, pp2, key0-key4, Noexec, CMO Option flags
This patch updates hpte_updatepp() to fetch the storage key value from
the linux page table and use the same in H_PROTECT hcall.
native_hpte_updatepp() is not updated because the kernel doesn't clear
the existing storage key value there. The kernel also doesn't use
hpte_updatepp() callback for updating storage keys.
This fixes the below kernel crash observed with KUAP enabled.
BUG: Unable to handle kernel data access on write at 0xc009fffffc440000
Faulting instruction address: 0xc0000000000b7030
Key fault AMR: 0xfcffffffffffffff IAMR: 0xc0000077bc498100
Found HPTE: v = 0x40070adbb6fffc05 r = 0x1ffffffffff1194
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
...
CFAR: c000000000010100 DAR: c009fffffc440000 DSISR: 02200000 IRQMASK: 0
...
NIP memset+0x68/0x104
LR pcpu_alloc+0x54c/0xb50
Call Trace:
pcpu_alloc+0x55c/0xb50 (unreliable)
blk_stat_alloc_callback+0x94/0x150
blk_mq_init_allocated_queue+0x64/0x560
blk_mq_init_queue+0x54/0xb0
scsi_mq_alloc_queue+0x30/0xa0
scsi_alloc_sdev+0x1cc/0x300
scsi_probe_and_add_lun+0xb50/0x1020
__scsi_scan_target+0x17c/0x790
scsi_scan_channel+0x90/0xe0
scsi_scan_host_selected+0x148/0x1f0
do_scan_async+0x2c/0x2a0
async_run_entry_fn+0x78/0x220
process_one_work+0x264/0x540
worker_thread+0xa8/0x600
kthread+0x190/0x1a0
ret_from_kernel_thread+0x5c/0x6c
With KUAP enabled the kernel uses storage key 3 for all its
translations. But as shown by the debug print, in this specific case we
have the hash page table entry created with key value 0.
Found HPTE: v = 0x40070adbb6fffc05 r = 0x1ffffffffff1194
and DSISR indicates a key fault.
This can happen due to parallel fault on the same EA by different CPUs:
CPU 0 CPU 1
fault on X
H_PAGE_BUSY set
fault on X
finish fault handling and
clear H_PAGE_BUSY
check for H_PAGE_BUSY
continue with fault handling.
This implies CPU1 will end up calling hpte_updatepp for address X and
the kernel updated the hash pte entry with key 0
Fixes: d94b827e89 ("powerpc/book3s64/kuap: Use Key 3 for kernel mapping with hash translation")
Reported-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Debugged-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210326070755.304625-1-aneesh.kumar@linux.ibm.com
-----BEGIN PGP SIGNATURE-----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=qVQp
-----END PGP SIGNATURE-----
Merge tag 'integrity-v5.12-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity fix from Mimi Zohar:
"Just one patch to address a NULL ptr dereferencing when there is a
mismatch between the user enabled LSMs and IMA/EVM"
* tag 'integrity-v5.12-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
integrity: double check iint_cache was initialized
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAmBctBgACgkQxWXV+ddt
WDu1nA//bzuPwW3nO+enE+ipi4t6UJTJpHLeDgdMshWwhBIHVt+oFxTUIt4Zd0kT
0hJ+mbNrZHzmDmzpb6ifQn0D6k+wq6zbsEgLtwgmPmBszaXIw46FvnYnxd9FtCde
9SQzBKa86i/KMkRtaIvpUcunniIo5Aj0Hvu0oPgTKObqiB4HP2nV6rKody+mP9JW
RanWbBi0JvI4UE/J2Ud1sNWFdDtVpXpcktj1dsI8gbsYNR05HpM08SEUgeF/ts3I
yB/L18I5CUeFHyo/yogbj7kkikugPGsmOj/A86UZ6x3NxWoC+m7UXoGrO2/qlFem
qd3ioXZKlnPqeX29kAy/REa3xjE61istlDVC/vckqmXBfYc6WK/KAJvFAGI+/3VI
9HvIbBokUQzekhFlA02RTqGcasStXX7VSeJyzyAbXjGhZQKfFTHR8ZBtrREiVBC9
58K+g8SSqIb/9iJqYV4h82lSBRSdf9kHx7CSB2gOBuifihY+chVr4Xzhq12IlXbK
TNlue0BTwYLJStwx2dnY2beLbLG34/4FNRsuAR/9JsCio7Bfj0qN8htIyvfsiMxr
mkrH7+Ykd10FqC8uu6MHiW9k428871Era3B97TgyQ0V17ehh4IN0v9V7kckk9EWw
3omaPwuF2FGfFOoTR7ipKO0nDx0/y2knnDSTsWknNG09Ciwa+Ww=
=SuJv
-----END PGP SIGNATURE-----
Merge tag 'for-5.12-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Fixes for issues that have some user visibility and are simple enough
for this time of development cycle:
- a few fixes for rescue= mount option, adding more checks for
missing trees
- fix sleeping in atomic context on qgroup deletion
- fix subvolume deletion on mount
- fix build with M= syntax
- fix checksum mismatch error message for direct io"
* tag 'for-5.12-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix check_data_csum() error message for direct I/O
btrfs: fix sleep while in non-sleep context during qgroup removal
btrfs: fix subvolume/snapshot deletion not triggered on mount
btrfs: fix build when using M=fs/btrfs
btrfs: do not initialize dev replace for bad dev root
btrfs: initialize device::fs_info always
btrfs: do not initialize dev stats if we have no dev_root
btrfs: zoned: remove outdated WARN_ON in direct IO
Li Wang reported that clock_gettime(CLOCK_MONOTONIC_RAW, ...) returns
incorrect values when time is provided via vdso instead of system call:
vdso_ts_nsec = 4484351380985507, vdso_ts.tv_sec = 4484351, vdso_ts.tv_nsec = 380985507
sys_ts_nsec = 1446923235377, sys_ts.tv_sec = 1446, sys_ts.tv_nsec = 923235377
Within the s390 specific vdso function __arch_get_hw_counter() reads
tod clock steering values from the arch_data member of the passed in
vdso_data structure.
Problem is that only for the CS_HRES_COARSE vdso_data arch_data is
initialized and gets updated. The CS_RAW specific vdso_data does not
contain any valid tod_clock_steering information, which explains the
different values.
Fix this by initializing and updating all vdso_datas.
Reported-by: Li Wang <liwang@redhat.com>
Tested-by: Li Wang <liwang@redhat.com>
Fixes: 1ba2d6c0fd ("s390/vdso: simplify __arch_get_hw_counter()")
Link: https://lore.kernel.org/linux-s390/YFnxr1ZlMIOIqjfq@osiris
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The s390 specific vdso function __arch_get_hw_counter() is supposed to
consider tod clock steering.
If a tod clock steering event happens and the tod clock is set to a
new value __arch_get_hw_counter() will not return the real tod clock
value but slowly drift it from the old delta until the returned value
finally matches the real tod clock value again.
Unfortunately the type of tod_steering_delta unsigned while it is
supposed to be signed. It depends on if tod_steering_delta is negative
or positive in which direction the vdso code drifts the clock value.
Worst case is now that instead of drifting the clock slowly it will
jump into the opposite direction by a factor of two.
Fix this by simply making tod_steering_delta signed.
Fixes: 4bff8cb545 ("s390: convert to GENERIC_VDSO")
Cc: <stable@vger.kernel.org> # 5.10
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
When converting the vdso assembler code to C it was forgotten to
actually copy the tod_steering_delta value to vdso_data page.
Which in turn means that tod clock steering will not work correctly.
Fix this by simply copying the value whenever it is updated.
Fixes: 4bff8cb545 ("s390: convert to GENERIC_VDSO")
Cc: <stable@vger.kernel.org> # 5.10
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Jens Axboe