Currently, cap_dentry_init_security returns 0 without actually
initializing the security label. This confuses its only caller
(nfs4_label_init_security) which expects an error in that situation, and
causes it to end up sending out junk onto the wire instead of simply
suppressing the label in the attributes sent.
When CONFIG_SECURITY is disabled, security_dentry_init_security returns
-EOPNOTSUPP. Have cap_dentry_init_security do the same.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Convert all compat system call functions where all parameter types
have a size of four or less than four bytes, or are pointer types
to COMPAT_SYSCALL_DEFINE.
The implicit casts within COMPAT_SYSCALL_DEFINE will perform proper
zero and sign extension to 64 bit of all parameters if needed.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Conflicts:
drivers/net/wireless/ath/ath9k/recv.c
drivers/net/wireless/mwifiex/pcie.c
net/ipv6/sit.c
The SIT driver conflict consists of a bug fix being done by hand
in 'net' (missing u64_stats_init()) whilst in 'net-next' a helper
was created (netdev_alloc_pcpu_stats()) which takes care of this.
The two wireless conflicts were overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch is based on an earlier patch by Eric Paris, he describes
the problem below:
"If an inode is accessed before policy load it will get placed on a
list of inodes to be initialized after policy load. After policy
load we call inode_doinit() which calls inode_doinit_with_dentry()
on all inodes accessed before policy load. In the case of inodes
in procfs that means we'll end up at the bottom where it does:
/* Default to the fs superblock SID. */
isec->sid = sbsec->sid;
if ((sbsec->flags & SE_SBPROC) && !S_ISLNK(inode->i_mode)) {
if (opt_dentry) {
isec->sclass = inode_mode_to_security_class(...)
rc = selinux_proc_get_sid(opt_dentry,
isec->sclass,
&sid);
if (rc)
goto out_unlock;
isec->sid = sid;
}
}
Since opt_dentry is null, we'll never call selinux_proc_get_sid()
and will leave the inode labeled with the label on the superblock.
I believe a fix would be to mimic the behavior of xattrs. Look
for an alias of the inode. If it can't be found, just leave the
inode uninitialized (and pick it up later) if it can be found, we
should be able to call selinux_proc_get_sid() ..."
On a system exhibiting this problem, you will notice a lot of files in
/proc with the generic "proc_t" type (at least the ones that were
accessed early in the boot), for example:
# ls -Z /proc/sys/kernel/shmmax | awk '{ print $4 " " $5 }'
system_u:object_r:proc_t:s0 /proc/sys/kernel/shmmax
However, with this patch in place we see the expected result:
# ls -Z /proc/sys/kernel/shmmax | awk '{ print $4 " " $5 }'
system_u:object_r:sysctl_kernel_t:s0 /proc/sys/kernel/shmmax
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Acked-by: Eric Paris <eparis@redhat.com>
It turns out that doing the SELinux MAC checks for mmap() before the
DAC checks was causing users and the SELinux policy folks headaches
as users were seeing a lot of SELinux AVC denials for the
memprotect:mmap_zero permission that would have also been denied by
the normal DAC capability checks (CAP_SYS_RAWIO).
Example:
# cat mmap_test.c
#include <stdlib.h>
#include <stdio.h>
#include <errno.h>
#include <sys/mman.h>
int main(int argc, char *argv[])
{
int rc;
void *mem;
mem = mmap(0x0, 4096,
PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS | MAP_FIXED, -1, 0);
if (mem == MAP_FAILED)
return errno;
printf("mem = %p\n", mem);
munmap(mem, 4096);
return 0;
}
# gcc -g -O0 -o mmap_test mmap_test.c
# ./mmap_test
mem = (nil)
# ausearch -m AVC | grep mmap_zero
type=AVC msg=audit(...): avc: denied { mmap_zero }
for pid=1025 comm="mmap_test"
scontext=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023
tcontext=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023
tclass=memprotect
This patch corrects things so that when the above example is run by a
user without CAP_SYS_RAWIO the SELinux AVC is no longer generated as
the DAC capability check fails before the SELinux permission check.
Signed-off-by: Paul Moore <pmoore@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
When writing policy via /sys/fs/selinux/policy I wrote the type and class
of filename trans rules in CPU endian instead of little endian. On
x86_64 this works just fine, but it means that on big endian arch's like
ppc64 and s390 userspace reads the policy and converts it from
le32_to_cpu. So the values are all screwed up. Write the values in le
format like it should have been to start.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Moore <pmoore@redhat.com>
The Makefiles in security/ uses a non-standard way to
specify sub-directories for building.
Fix it up so the normal (and documented) approach is used.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Inserting a entry into flowcache, or flushing flowcache should be based
on per net scope. The reason to do so is flushing operation from fat
netns crammed with flow entries will also making the slim netns with only
a few flow cache entries go away in original implementation.
Since flowcache is tightly coupled with IPsec, so it would be easier to
put flow cache global parameters into xfrm namespace part. And one last
thing needs to do is bumping flow cache genid, and flush flow cache should
also be made in per net style.
Signed-off-by: Fan Du <fan.du@windriver.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
cgroup_subsys is a bit messier than it needs to be.
* The name of a subsys can be different from its internal identifier
defined in cgroup_subsys.h. Most subsystems use the matching name
but three - cpu, memory and perf_event - use different ones.
* cgroup_subsys_id enums are postfixed with _subsys_id and each
cgroup_subsys is postfixed with _subsys. cgroup.h is widely
included throughout various subsystems, it doesn't and shouldn't
have claim on such generic names which don't have any qualifier
indicating that they belong to cgroup.
* cgroup_subsys->subsys_id should always equal the matching
cgroup_subsys_id enum; however, we require each controller to
initialize it and then BUG if they don't match, which is a bit
silly.
This patch cleans up cgroup_subsys names and initialization by doing
the followings.
* cgroup_subsys_id enums are now postfixed with _cgrp_id, and each
cgroup_subsys with _cgrp_subsys.
* With the above, renaming subsys identifiers to match the userland
visible names doesn't cause any naming conflicts. All non-matching
identifiers are renamed to match the official names.
cpu_cgroup -> cpu
mem_cgroup -> memory
perf -> perf_event
* controllers no longer need to initialize ->subsys_id and ->name.
They're generated in cgroup core and set automatically during boot.
* Redundant cgroup_subsys declarations removed.
* While updating BUG_ON()s in cgroup_init_early(), convert them to
WARN()s. BUGging that early during boot is stupid - the kernel
can't print anything, even through serial console and the trap
handler doesn't even link stack frame properly for back-tracing.
This patch doesn't introduce any behavior changes.
v2: Rebased on top of fe1217c4f3 ("net: net_cls: move cgroupfs
classid handling into core").
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: "David S. Miller" <davem@davemloft.net>
Acked-by: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Acked-by: Ingo Molnar <mingo@redhat.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Serge E. Hallyn <serue@us.ibm.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Thomas Graf <tgraf@suug.ch>
The usage of strict_strto*() is not preferred, because
strict_strto*() is obsolete. Thus, kstrto*() should be
used.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Setting an empty security context (length=0) on a file will
lead to incorrectly dereferencing the type and other fields
of the security context structure, yielding a kernel BUG.
As a zero-length security context is never valid, just reject
all such security contexts whether coming from userspace
via setxattr or coming from the filesystem upon a getxattr
request by SELinux.
Setting a security context value (empty or otherwise) unknown to
SELinux in the first place is only possible for a root process
(CAP_MAC_ADMIN), and, if running SELinux in enforcing mode, only
if the corresponding SELinux mac_admin permission is also granted
to the domain by policy. In Fedora policies, this is only allowed for
specific domains such as livecd for setting down security contexts
that are not defined in the build host policy.
Reproducer:
su
setenforce 0
touch foo
setfattr -n security.selinux foo
Caveat:
Relabeling or removing foo after doing the above may not be possible
without booting with SELinux disabled. Any subsequent access to foo
after doing the above will also trigger the BUG.
BUG output from Matthew Thode:
[ 473.893141] ------------[ cut here ]------------
[ 473.962110] kernel BUG at security/selinux/ss/services.c:654!
[ 473.995314] invalid opcode: 0000 [#6] SMP
[ 474.027196] Modules linked in:
[ 474.058118] CPU: 0 PID: 8138 Comm: ls Tainted: G D I
3.13.0-grsec #1
[ 474.116637] Hardware name: Supermicro X8ST3/X8ST3, BIOS 2.0
07/29/10
[ 474.149768] task: ffff8805f50cd010 ti: ffff8805f50cd488 task.ti:
ffff8805f50cd488
[ 474.183707] RIP: 0010:[<ffffffff814681c7>] [<ffffffff814681c7>]
context_struct_compute_av+0xce/0x308
[ 474.219954] RSP: 0018:ffff8805c0ac3c38 EFLAGS: 00010246
[ 474.252253] RAX: 0000000000000000 RBX: ffff8805c0ac3d94 RCX:
0000000000000100
[ 474.287018] RDX: ffff8805e8aac000 RSI: 00000000ffffffff RDI:
ffff8805e8aaa000
[ 474.321199] RBP: ffff8805c0ac3cb8 R08: 0000000000000010 R09:
0000000000000006
[ 474.357446] R10: 0000000000000000 R11: ffff8805c567a000 R12:
0000000000000006
[ 474.419191] R13: ffff8805c2b74e88 R14: 00000000000001da R15:
0000000000000000
[ 474.453816] FS: 00007f2e75220800(0000) GS:ffff88061fc00000(0000)
knlGS:0000000000000000
[ 474.489254] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 474.522215] CR2: 00007f2e74716090 CR3: 00000005c085e000 CR4:
00000000000207f0
[ 474.556058] Stack:
[ 474.584325] ffff8805c0ac3c98 ffffffff811b549b ffff8805c0ac3c98
ffff8805f1190a40
[ 474.618913] ffff8805a6202f08 ffff8805c2b74e88 00068800d0464990
ffff8805e8aac860
[ 474.653955] ffff8805c0ac3cb8 000700068113833a ffff880606c75060
ffff8805c0ac3d94
[ 474.690461] Call Trace:
[ 474.723779] [<ffffffff811b549b>] ? lookup_fast+0x1cd/0x22a
[ 474.778049] [<ffffffff81468824>] security_compute_av+0xf4/0x20b
[ 474.811398] [<ffffffff8196f419>] avc_compute_av+0x2a/0x179
[ 474.843813] [<ffffffff8145727b>] avc_has_perm+0x45/0xf4
[ 474.875694] [<ffffffff81457d0e>] inode_has_perm+0x2a/0x31
[ 474.907370] [<ffffffff81457e76>] selinux_inode_getattr+0x3c/0x3e
[ 474.938726] [<ffffffff81455cf6>] security_inode_getattr+0x1b/0x22
[ 474.970036] [<ffffffff811b057d>] vfs_getattr+0x19/0x2d
[ 475.000618] [<ffffffff811b05e5>] vfs_fstatat+0x54/0x91
[ 475.030402] [<ffffffff811b063b>] vfs_lstat+0x19/0x1b
[ 475.061097] [<ffffffff811b077e>] SyS_newlstat+0x15/0x30
[ 475.094595] [<ffffffff8113c5c1>] ? __audit_syscall_entry+0xa1/0xc3
[ 475.148405] [<ffffffff8197791e>] system_call_fastpath+0x16/0x1b
[ 475.179201] Code: 00 48 85 c0 48 89 45 b8 75 02 0f 0b 48 8b 45 a0 48
8b 3d 45 d0 b6 00 8b 40 08 89 c6 ff ce e8 d1 b0 06 00 48 85 c0 49 89 c7
75 02 <0f> 0b 48 8b 45 b8 4c 8b 28 eb 1e 49 8d 7d 08 be 80 01 00 00 e8
[ 475.255884] RIP [<ffffffff814681c7>]
context_struct_compute_av+0xce/0x308
[ 475.296120] RSP <ffff8805c0ac3c38>
[ 475.328734] ---[ end trace f076482e9d754adc ]---
Reported-by: Matthew Thode <mthode@mthode.org>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Moore <pmoore@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJS3IyXAAoJEHm+PkMAQRiGplAH/ilCikBrCHyZ2938NHNLm+j1
yhfYnEJHLNg7T69KEj3p0cNagO3v9RPWM6UYFBQ6uFIYNN1MBKO7U+mCZuMWzeO8
+tGMV3mn5wx+oYn1RnWCCweQx5AESEl6rYn8udPDKh7LfW5fCLV60jguUjVSQ9IQ
cvtKlWknbiHyM7t1GoYgzN7jlPrRQvcNQZ+Aogzz7uSnJAgwINglBAHS7WP2tiEM
HAU2FoE4b3MbfGaid1vypaYQPBbFebx7Bw2WxAuZhkBbRiUBKlgF0/SYhOTvH38a
Sjpj1EHKfjcuCBt9tht6KP6H56R25vNloGR2+FB+fuQBdujd/SPa9xDflEMcdG4=
=iXnG
-----END PGP SIGNATURE-----
Merge tag 'v3.13' into stable-3.14
Linux 3.13
Conflicts:
security/selinux/hooks.c
Trivial merge issue in selinux_inet_conn_request() likely due to me
including patches that I sent to the stable folks in my next tree
resulting in the patch hitting twice (I think). Thankfully it was an
easy fix this time, but regardless, lesson learned, I will not do that
again.
Binaries compiled for arm may run on arm64 if CONFIG_COMPAT is
selected. Set LSM_MMAP_MIN_ADDR to 32768 if ARM64 && COMPAT to
prevent selinux failures launching 32-bit static executables that
are mapped at 0x8000.
Signed-off-by: Colin Cross <ccross@android.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Eric Paris <eparis@redhat.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Pull audit update from Eric Paris:
"Again we stayed pretty well contained inside the audit system.
Venturing out was fixing a couple of function prototypes which were
inconsistent (didn't hurt anything, but we used the same value as an
int, uint, u32, and I think even a long in a couple of places).
We also made a couple of minor changes to when a couple of LSMs called
the audit system. We hoped to add aarch64 audit support this go
round, but it wasn't ready.
I'm disappearing on vacation on Thursday. I should have internet
access, but it'll be spotty. If anything goes wrong please be sure to
cc rgb@redhat.com. He'll make fixing things his top priority"
* git://git.infradead.org/users/eparis/audit: (50 commits)
audit: whitespace fix in kernel-parameters.txt
audit: fix location of __net_initdata for audit_net_ops
audit: remove pr_info for every network namespace
audit: Modify a set of system calls in audit class definitions
audit: Convert int limit uses to u32
audit: Use more current logging style
audit: Use hex_byte_pack_upper
audit: correct a type mismatch in audit_syscall_exit()
audit: reorder AUDIT_TTY_SET arguments
audit: rework AUDIT_TTY_SET to only grab spin_lock once
audit: remove needless switch in AUDIT_SET
audit: use define's for audit version
audit: documentation of audit= kernel parameter
audit: wait_for_auditd rework for readability
audit: update MAINTAINERS
audit: log task info on feature change
audit: fix incorrect set of audit_sock
audit: print error message when fail to create audit socket
audit: fix dangling keywords in audit_log_set_loginuid() output
audit: log on errors from filter user rules
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJS3IyXAAoJEHm+PkMAQRiGplAH/ilCikBrCHyZ2938NHNLm+j1
yhfYnEJHLNg7T69KEj3p0cNagO3v9RPWM6UYFBQ6uFIYNN1MBKO7U+mCZuMWzeO8
+tGMV3mn5wx+oYn1RnWCCweQx5AESEl6rYn8udPDKh7LfW5fCLV60jguUjVSQ9IQ
cvtKlWknbiHyM7t1GoYgzN7jlPrRQvcNQZ+Aogzz7uSnJAgwINglBAHS7WP2tiEM
HAU2FoE4b3MbfGaid1vypaYQPBbFebx7Bw2WxAuZhkBbRiUBKlgF0/SYhOTvH38a
Sjpj1EHKfjcuCBt9tht6KP6H56R25vNloGR2+FB+fuQBdujd/SPa9xDflEMcdG4=
=iXnG
-----END PGP SIGNATURE-----
Merge tag 'v3.13' into next
Linux 3.13
Minor fixup needed in selinux_inet_conn_request()
Conflicts:
security/selinux/hooks.c
Pull cgroup updates from Tejun Heo:
"The bulk of changes are cleanups and preparations for the upcoming
kernfs conversion.
- cgroup_event mechanism which is and will be used only by memcg is
moved to memcg.
- pidlist handling is updated so that it can be served by seq_file.
Also, the list is not sorted if sane_behavior. cgroup
documentation explicitly states that the file is not sorted but it
has been for quite some time.
- All cgroup file handling now happens on top of seq_file. This is
to prepare for kernfs conversion. In addition, all operations are
restructured so that they map 1-1 to kernfs operations.
- Other cleanups and low-pri fixes"
* 'for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (40 commits)
cgroup: trivial style updates
cgroup: remove stray references to css_id
doc: cgroups: Fix typo in doc/cgroups
cgroup: fix fail path in cgroup_load_subsys()
cgroup: fix missing unlock on error in cgroup_load_subsys()
cgroup: remove for_each_root_subsys()
cgroup: implement for_each_css()
cgroup: factor out cgroup_subsys_state creation into create_css()
cgroup: combine css handling loops in cgroup_create()
cgroup: reorder operations in cgroup_create()
cgroup: make for_each_subsys() useable under cgroup_root_mutex
cgroup: css iterations and css_from_dir() are safe under cgroup_mutex
cgroup: unify pidlist and other file handling
cgroup: replace cftype->read_seq_string() with cftype->seq_show()
cgroup: attach cgroup_open_file to all cgroup files
cgroup: generalize cgroup_pidlist_open_file
cgroup: unify read path so that seq_file is always used
cgroup: unify cgroup_write_X64() and cgroup_write_string()
cgroup: remove cftype->read(), ->read_map() and ->write()
hugetlb_cgroup: convert away from cftype->read()
...
Pull security layer updates from James Morris:
"Changes for this kernel include maintenance updates for Smack, SELinux
(and several networking fixes), IMA and TPM"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (39 commits)
SELinux: Fix memory leak upon loading policy
tpm/tpm-sysfs: active_show() can be static
tpm: tpm_tis: Fix compile problems with CONFIG_PM_SLEEP/CONFIG_PNP
tpm: Make tpm-dev allocate a per-file structure
tpm: Use the ops structure instead of a copy in tpm_vendor_specific
tpm: Create a tpm_class_ops structure and use it in the drivers
tpm: Pull all driver sysfs code into tpm-sysfs.c
tpm: Move sysfs functions from tpm-interface to tpm-sysfs
tpm: Pull everything related to /dev/tpmX into tpm-dev.c
char: tpm: nuvoton: remove unused variable
tpm: MAINTAINERS: Cleanup TPM Maintainers file
tpm/tpm_i2c_atmel: fix coccinelle warnings
tpm/tpm_ibmvtpm: fix unreachable code warning (smatch warning)
tpm/tpm_i2c_stm_st33: Check return code of get_burstcount
tpm/tpm_ppi: Check return value of acpi_get_name
tpm/tpm_ppi: Do not compare strcmp(a,b) == -1
ima: remove unneeded size_limit argument from ima_eventdigest_init_common()
ima: update IMA-templates.txt documentation
ima: pass HASH_ALGO__LAST as hash algo in ima_eventdigest_init()
ima: change the default hash algorithm to SHA1 in ima_eventdigest_ng_init()
...
Remove the call to audit_log() (which call audit_log_start()) and deal with
the errors in the caller, logging only once if the condition is met. Calling
audit_log_start() in this location makes buffer allocation and locking more
complicated in the calling tree (audit_filter_user()).
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Two of the conditions in selinux_audit_rule_match() should never happen and
the third indicates a race that should be retried. Remove the calls to
audit_log() (which call audit_log_start()) and deal with the errors in the
caller, logging only once if the condition is met. Calling audit_log_start()
in this location makes buffer allocation and locking more complicated in the
calling tree (audit_filter_user()).
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
While running stress tests on adding and deleting ftrace instances I hit
this bug:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
IP: selinux_inode_permission+0x85/0x160
PGD 63681067 PUD 7ddbe067 PMD 0
Oops: 0000 [#1] PREEMPT
CPU: 0 PID: 5634 Comm: ftrace-test-mki Not tainted 3.13.0-rc4-test-00033-gd2a6dde-dirty #20
Hardware name: /DG965MQ, BIOS MQ96510J.86A.0372.2006.0605.1717 06/05/2006
task: ffff880078375800 ti: ffff88007ddb0000 task.ti: ffff88007ddb0000
RIP: 0010:[<ffffffff812d8bc5>] [<ffffffff812d8bc5>] selinux_inode_permission+0x85/0x160
RSP: 0018:ffff88007ddb1c48 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000800000 RCX: ffff88006dd43840
RDX: 0000000000000001 RSI: 0000000000000081 RDI: ffff88006ee46000
RBP: ffff88007ddb1c88 R08: 0000000000000000 R09: ffff88007ddb1c54
R10: 6e6576652f6f6f66 R11: 0000000000000003 R12: 0000000000000000
R13: 0000000000000081 R14: ffff88006ee46000 R15: 0000000000000000
FS: 00007f217b5b6700(0000) GS:ffffffff81e21000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033^M
CR2: 0000000000000020 CR3: 000000006a0fe000 CR4: 00000000000007f0
Call Trace:
security_inode_permission+0x1c/0x30
__inode_permission+0x41/0xa0
inode_permission+0x18/0x50
link_path_walk+0x66/0x920
path_openat+0xa6/0x6c0
do_filp_open+0x43/0xa0
do_sys_open+0x146/0x240
SyS_open+0x1e/0x20
system_call_fastpath+0x16/0x1b
Code: 84 a1 00 00 00 81 e3 00 20 00 00 89 d8 83 c8 02 40 f6 c6 04 0f 45 d8 40 f6 c6 08 74 71 80 cf 02 49 8b 46 38 4c 8d 4d cc 45 31 c0 <0f> b7 50 20 8b 70 1c 48 8b 41 70 89 d9 8b 78 04 e8 36 cf ff ff
RIP selinux_inode_permission+0x85/0x160
CR2: 0000000000000020
Investigating, I found that the inode->i_security was NULL, and the
dereference of it caused the oops.
in selinux_inode_permission():
isec = inode->i_security;
rc = avc_has_perm_noaudit(sid, isec->sid, isec->sclass, perms, 0, &avd);
Note, the crash came from stressing the deletion and reading of debugfs
files. I was not able to recreate this via normal files. But I'm not
sure they are safe. It may just be that the race window is much harder
to hit.
What seems to have happened (and what I have traced), is the file is
being opened at the same time the file or directory is being deleted.
As the dentry and inode locks are not held during the path walk, nor is
the inodes ref counts being incremented, there is nothing saving these
structures from being discarded except for an rcu_read_lock().
The rcu_read_lock() protects against freeing of the inode, but it does
not protect freeing of the inode_security_struct. Now if the freeing of
the i_security happens with a call_rcu(), and the i_security field of
the inode is not changed (it gets freed as the inode gets freed) then
there will be no issue here. (Linus Torvalds suggested not setting the
field to NULL such that we do not need to check if it is NULL in the
permission check).
Note, this is a hack, but it fixes the problem at hand. A real fix is
to restructure the destroy_inode() to call all the destructor handlers
from the RCU callback. But that is a major job to do, and requires a
lot of work. For now, we just band-aid this bug with this fix (it
works), and work on a more maintainable solution in the future.
Link: http://lkml.kernel.org/r/20140109101932.0508dec7@gandalf.local.home
Link: http://lkml.kernel.org/r/20140109182756.17abaaa8@gandalf.local.home
Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hello.
I got below leak with linux-3.10.0-54.0.1.el7.x86_64 .
[ 681.903890] kmemleak: 5538 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
Below is a patch, but I don't know whether we need special handing for undoing
ebitmap_set_bit() call.
----------
>>From fe97527a90fe95e2239dfbaa7558f0ed559c0992 Mon Sep 17 00:00:00 2001
From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Date: Mon, 6 Jan 2014 16:30:21 +0900
Subject: [PATCH] SELinux: Fix memory leak upon loading policy
Commit 2463c26d "SELinux: put name based create rules in a hashtable" did not
check return value from hashtab_insert() in filename_trans_read(). It leaks
memory if hashtab_insert() returns error.
unreferenced object 0xffff88005c9160d0 (size 8):
comm "systemd", pid 1, jiffies 4294688674 (age 235.265s)
hex dump (first 8 bytes):
57 0b 00 00 6b 6b 6b a5 W...kkk.
backtrace:
[<ffffffff816604ae>] kmemleak_alloc+0x4e/0xb0
[<ffffffff811cba5e>] kmem_cache_alloc_trace+0x12e/0x360
[<ffffffff812aec5d>] policydb_read+0xd1d/0xf70
[<ffffffff812b345c>] security_load_policy+0x6c/0x500
[<ffffffff812a623c>] sel_write_load+0xac/0x750
[<ffffffff811eb680>] vfs_write+0xc0/0x1f0
[<ffffffff811ec08c>] SyS_write+0x4c/0xa0
[<ffffffff81690419>] system_call_fastpath+0x16/0x1b
[<ffffffffffffffff>] 0xffffffffffffffff
However, we should not return EEXIST error to the caller, or the systemd will
show below message and the boot sequence freezes.
systemd[1]: Failed to load SELinux policy. Freezing.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Eric Paris <eparis@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Moore <pmoore@redhat.com>
This patch removes the 'size_limit' argument from
ima_eventdigest_init_common(). Since the 'd' field will never include
the hash algorithm as prefix and the 'd-ng' will always have it, we can
use the hash algorithm to differentiate the two cases in the modified
function (it is equal to HASH_ALGO__LAST in the first case, the opposite
in the second).
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Replace the '-1' value with HASH_ALGO__LAST in ima_eventdigest_init()
as the called function ima_eventdigest_init_common() expects an unsigned
char.
Fix commit:
4d7aeee ima: define new template ima-ng and template fields d-ng and n-ng
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Replace HASH_ALGO__LAST with HASH_ALGO_SHA1 as the initial value of
the hash algorithm so that the prefix 'sha1:' is added to violation
digests.
Fix commit:
4d7aeee ima: define new template ima-ng and template fields d-ng and n-ng
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Cc: <stable@vger.kernel.org> # 3.13.x
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Eric Paris politely points out:
Inside smack_file_receive() it seems like you are initting the audit
field with LSM_AUDIT_DATA_TASK. And then use
smk_ad_setfield_u_fs_path().
Seems like LSM_AUDIT_DATA_PATH would make more sense. (and depending
on how it's used fix a crash...)
He is correct. This puts things in order.
Targeted for git://git.gitorious.org/smack-next/kernel.git
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
The mount restrictions imposed by Smack rely heavily on the
use of the filesystem "floor", which is the label that all
processes writing to the filesystem must have access to. It
turns out that while the "floor" notion is sound, it has yet
to be fully implemented and has never been used.
The sb_mount and sb_umount hooks only make sense if the
filesystem floor is used actively, and it isn't. They can
be reintroduced if a rational restriction comes up. Until
then, they get removed.
The sb_kern_mount hook is required for the option processing.
It is too permissive in the case of unprivileged mounts,
effectively bypassing the CAP_MAC_ADMIN restrictions if
any of the smack options are specified. Unprivileged mounts
are no longer allowed to set Smack filesystem options.
Additionally, the root and default values are set to the
label of the caller, in keeping with the policy that objects
get the label of their creator.
Targeted for git://git.gitorious.org/smack-next/kernel.git
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
smk_write_change_rule() is calling capable rather than
the more correct smack_privileged(). This allows for setting
rules in violation of the onlycap facility. This is the
simple repair.
Targeted for git://git.gitorious.org/smack-next/kernel.git
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
The syslog control requires that the calling proccess
have the floor ("_") Smack label. Tizen does not run any
processes except for kernel helpers with the floor label.
This changes allows the admin to configure a specific
label for syslog. The default value is the star ("*")
label, effectively removing the restriction. The value
can be set using smackfs/syslog for anyone who wants
a more restrictive behavior.
Targeted for git://git.gitorious.org/smack-next/kernel.git
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
selinux_setprocattr() does ptrace_parent(p) under task_lock(p),
but task_struct->alloc_lock doesn't pin ->parent or ->ptrace,
this looks confusing and triggers the "suspicious RCU usage"
warning because ptrace_parent() does rcu_dereference_check().
And in theory this is wrong, spin_lock()->preempt_disable()
doesn't necessarily imply rcu_read_lock() we need to access
the ->parent.
Reported-by: Evan McNabb <emcnabb@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Moore <pmoore@redhat.com>
Fix a broken networking check. Return an error if peer recv fails. If
secmark is active and the packet recv succeeds the peer recv error is
ignored.
Signed-off-by: Chad Hanson <chanson@trustedcs.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Moore <pmoore@redhat.com>
Smack prohibits processes from using the star ("*") and web ("@") labels
because we don't want files with those labels getting created implicitly.
All setting of those labels should be done explicitly. The trouble is that
there is no check for these labels in the processing of SMACK64EXEC. That
is repaired.
Targeted for git://git.gitorious.org/smack-next/kernel.git
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
selinux_setprocattr() does ptrace_parent(p) under task_lock(p),
but task_struct->alloc_lock doesn't pin ->parent or ->ptrace,
this looks confusing and triggers the "suspicious RCU usage"
warning because ptrace_parent() does rcu_dereference_check().
And in theory this is wrong, spin_lock()->preempt_disable()
doesn't necessarily imply rcu_read_lock() we need to access
the ->parent.
Reported-by: Evan McNabb <emcnabb@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Moore <pmoore@redhat.com>
Pull SELinux fixes from James Morris.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
selinux: process labeled IPsec TCP SYN-ACK packets properly in selinux_ip_postroute()
selinux: look for IPsec labels on both inbound and outbound packets
selinux: handle TCP SYN-ACK packets correctly in selinux_ip_postroute()
selinux: handle TCP SYN-ACK packets correctly in selinux_ip_output()
selinux: fix possible memory leak
This reverts commit 102aefdda4.
Tom London reports that it causes sync() to hang on Fedora rawhide:
https://bugzilla.redhat.com/show_bug.cgi?id=1033965
and Josh Boyer bisected it down to this commit. Reverting the commit in
the rawhide kernel fixes the problem.
Eric Paris root-caused it to incorrect subtype matching in that commit
breaking fuse, and has a tentative patch, but by now we're better off
retrying this in 3.14 rather than playing with it any more.
Reported-by: Tom London <selinux@gmail.com>
Bisected-by: Josh Boyer <jwboyer@fedoraproject.org>
Acked-by: Eric Paris <eparis@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: Anand Avati <avati@redhat.com>
Cc: Paul Moore <paul@paul-moore.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Revert "selinux: consider filesystem subtype in policies"
This reverts commit 102aefdda4.
Explanation from Eric Paris:
SELinux policy can specify if it should use a filesystem's
xattrs or not. In current policy we have a specification that
fuse should not use xattrs but fuse.glusterfs should use
xattrs. This patch has a bug in which non-glusterfs
filesystems would match the rule saying fuse.glusterfs should
use xattrs. If both fuse and the particular filesystem in
question are not written to handle xattr calls during the mount
command, they will deadlock.
I have fixed the bug to do proper matching, however I believe a
revert is still the correct solution. The reason I believe
that is because the code still does not work. The s_subtype is
not set until after the SELinux hook which attempts to match on
the ".gluster" portion of the rule. So we cannot match on the
rule in question. The code is useless.
Signed-off-by: Paul Moore <pmoore@redhat.com>
Due to difficulty in arriving at the proper security label for
TCP SYN-ACK packets in selinux_ip_postroute(), we need to check packets
while/before they are undergoing XFRM transforms instead of waiting
until afterwards so that we can determine the correct security label.
Reported-by: Janak Desai <Janak.Desai@gtri.gatech.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Moore <pmoore@redhat.com>
Previously selinux_skb_peerlbl_sid() would only check for labeled
IPsec security labels on inbound packets, this patch enables it to
check both inbound and outbound traffic for labeled IPsec security
labels.
Reported-by: Janak Desai <Janak.Desai@gtri.gatech.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Moore <pmoore@redhat.com>
In selinux_ip_postroute() we perform access checks based on the
packet's security label. For locally generated traffic we get the
packet's security label from the associated socket; this works in all
cases except for TCP SYN-ACK packets. In the case of SYN-ACK packet's
the correct security label is stored in the connection's request_sock,
not the server's socket. Unfortunately, at the point in time when
selinux_ip_postroute() is called we can't query the request_sock
directly, we need to recreate the label using the same logic that
originally labeled the associated request_sock.
See the inline comments for more explanation.
Reported-by: Janak Desai <Janak.Desai@gtri.gatech.edu>
Tested-by: Janak Desai <Janak.Desai@gtri.gatech.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Moore <pmoore@redhat.com>
In selinux_ip_output() we always label packets based on the parent
socket. While this approach works in almost all cases, it doesn't
work in the case of TCP SYN-ACK packets when the correct label is not
the label of the parent socket, but rather the label of the larval
socket represented by the request_sock struct.
Unfortunately, since the request_sock isn't queued on the parent
socket until *after* the SYN-ACK packet is sent, we can't lookup the
request_sock to determine the correct label for the packet; at this
point in time the best we can do is simply pass/NF_ACCEPT the packet.
It must be said that simply passing the packet without any explicit
labeling action, while far from ideal, is not terrible as the SYN-ACK
packet will inherit any IP option based labeling from the initial
connection request so the label *should* be correct and all our
access controls remain in place so we shouldn't have to worry about
information leaks.
Reported-by: Janak Desai <Janak.Desai@gtri.gatech.edu>
Tested-by: Janak Desai <Janak.Desai@gtri.gatech.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Moore <pmoore@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQIVAwUAUqdgihOxKuMESys7AQIishAAjGG3LnEp12fd7oay5//4SEg31ybPqGj7
Xotk9mblBW7cWPbLqk7xyIhxpIj2zM14XatEV2TfBNZV0Lcrzr1M5s87ZRUX0ui+
FHbtfn/M3Or8AvX7W1HZgG2Se7M0Ba6Y2RRXNsEdgqk6KMQuHhPEZ2FZ5vCx6BAD
vXzxWIKVNeqMXR7z6xkyqmpztnVQs+ZgzE9+c96QKyhBdtBy4spDmfgJS90m0pjN
HhgONpdfgosknj8yu43rWIQvd3UUO5BVntCeic94Fbgh77ZAEi0dD7ifLz/ebcja
pfJfPXxYzkCfIrSdAzQF8iYnQ+5rRomvGsMcvtq6mBooah/YmEkmKpKJDTp47wyN
IEUeJaxM2Qp2jcUSjEd7lY9o1AK4sj+90cKeVRUd5kzZP1iolkQHR+dGiAwqbn6w
MJBn9fCamvhpsZDhl2G/DICprFDvErd9zAlNubivggJmITnPXNWx+K1RDL4fO4qc
zLHTGHkxYyACM/7oJfwbH/NyZ1yu53OlE3R2h6TA6ISc7nAed7qzGAZyrSV92Quc
pItGaQ/zNa0sbe+nufCx9FOWu8sA3x7qnazLxhVtlPde9nlxcpGo5cagqcyc4hyp
/IGK2JoGkgHvehECY8miJlsu7UqmThIhmy6o4T4X6ErX1M9ifR92WGeXkAi/2mh/
WciVpPvTrqM=
=/AdA
-----END PGP SIGNATURE-----
Merge tag 'keys-devel-20131210' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull misc keyrings fixes from David Howells:
"These break down into five sets:
- A patch to error handling in the big_key type for huge payloads.
If the payload is larger than the "low limit" and the backing store
allocation fails, then big_key_instantiate() doesn't clear the
payload pointers in the key, assuming them to have been previously
cleared - but only one of them is.
Unfortunately, the garbage collector still calls big_key_destroy()
when sees one of the pointers with a weird value in it (and not
NULL) which it then tries to clean up.
- Three patches to fix the keyring type:
* A patch to fix the hash function to correctly divide keyrings off
from keys in the topology of the tree inside the associative
array. This is only a problem if searching through nested
keyrings - and only if the hash function incorrectly puts the a
keyring outside of the 0 branch of the root node.
* A patch to fix keyrings' use of the associative array. The
__key_link_begin() function initially passes a NULL key pointer
to assoc_array_insert() on the basis that it's holding a place in
the tree whilst it does more allocation and stuff.
This is only a problem when a node contains 16 keys that match at
that level and we want to add an also matching 17th. This should
easily be manufactured with a keyring full of keyrings (without
chucking any other sort of key into the mix) - except for (a)
above which makes it on average adding the 65th keyring.
* A patch to fix searching down through nested keyrings, where any
keyring in the set has more than 16 keyrings and none of the
first keyrings we look through has a match (before the tree
iteration needs to step to a more distal node).
Test in keyutils test suite:
http://git.kernel.org/cgit/linux/kernel/git/dhowells/keyutils.git/commit/?id=8b4ae963ed92523aea18dfbb8cab3f4979e13bd1
- A patch to fix the big_key type's use of a shmem file as its
backing store causing audit messages and LSM check failures. This
is done by setting S_PRIVATE on the file to avoid LSM checks on the
file (access to the shmem file goes through the keyctl() interface
and so is gated by the LSM that way).
This isn't normally a problem if a key is used by the context that
generated it - and it's currently only used by libkrb5.
Test in keyutils test suite:
http://git.kernel.org/cgit/linux/kernel/git/dhowells/keyutils.git/commit/?id=d9a53cbab42c293962f2f78f7190253fc73bd32e
- A patch to add a generated file to .gitignore.
- A patch to fix the alignment of the system certificate data such
that it it works on s390. As I understand it, on the S390 arch,
symbols must be 2-byte aligned because loading the address discards
the least-significant bit"
* tag 'keys-devel-20131210' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
KEYS: correct alignment of system_certificate_list content in assembly file
Ignore generated file kernel/x509_certificate_list
security: shmem: implement kernel private shmem inodes
KEYS: Fix searching of nested keyrings
KEYS: Fix multiple key add into associative array
KEYS: Fix the keyring hash function
KEYS: Pre-clear struct key on allocation
Fix a broken networking check. Return an error if peer recv fails. If
secmark is active and the packet recv succeeds the peer recv error is
ignored.
Signed-off-by: Chad Hanson <chanson@trustedcs.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
This is a regression caused by f7112e6c. When either subject or
object is not found the answer for access should be no. This
patch fixes the situation. '0' is written back instead of failing
with -EINVAL.
v2: cosmetic style fixes
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Due to difficulty in arriving at the proper security label for
TCP SYN-ACK packets in selinux_ip_postroute(), we need to check packets
while/before they are undergoing XFRM transforms instead of waiting
until afterwards so that we can determine the correct security label.
Reported-by: Janak Desai <Janak.Desai@gtri.gatech.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Moore <pmoore@redhat.com>
Previously selinux_skb_peerlbl_sid() would only check for labeled
IPsec security labels on inbound packets, this patch enables it to
check both inbound and outbound traffic for labeled IPsec security
labels.
Reported-by: Janak Desai <Janak.Desai@gtri.gatech.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Moore <pmoore@redhat.com>
In preparation of conversion to kernfs, cgroup file handling is
updated so that it can be easily mapped to kernfs. This patch
replaces cftype->read_seq_string() with cftype->seq_show() which is
not limited to single_open() operation and will map directcly to
kernfs seq_file interface.
The conversions are mechanical. As ->seq_show() doesn't have @css and
@cft, the functions which make use of them are converted to use
seq_css() and seq_cft() respectively. In several occassions, e.f. if
it has seq_string in its name, the function name is updated to fit the
new method better.
This patch does not introduce any behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Aristeu Rozanski <arozansk@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
We don't need to inspect the packet to determine if the packet is an
IPv4 packet arriving on an IPv6 socket when we can query the
request_sock directly.
Signed-off-by: Paul Moore <pmoore@redhat.com>
In selinux_netlbl_skbuff_setsid() we leverage a cached NetLabel
secattr whenever possible. However, we never check to ensure that
the desired SID matches the cached NetLabel secattr. This patch
checks the SID against the secattr before use and only uses the
cached secattr when the SID values match.
Signed-off-by: Paul Moore <pmoore@redhat.com>
In selinux_ip_postroute() we perform access checks based on the
packet's security label. For locally generated traffic we get the
packet's security label from the associated socket; this works in all
cases except for TCP SYN-ACK packets. In the case of SYN-ACK packet's
the correct security label is stored in the connection's request_sock,
not the server's socket. Unfortunately, at the point in time when
selinux_ip_postroute() is called we can't query the request_sock
directly, we need to recreate the label using the same logic that
originally labeled the associated request_sock.
See the inline comments for more explanation.
Reported-by: Janak Desai <Janak.Desai@gtri.gatech.edu>
Tested-by: Janak Desai <Janak.Desai@gtri.gatech.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Moore <pmoore@redhat.com>
In selinux_ip_output() we always label packets based on the parent
socket. While this approach works in almost all cases, it doesn't
work in the case of TCP SYN-ACK packets when the correct label is not
the label of the parent socket, but rather the label of the larval
socket represented by the request_sock struct.
Unfortunately, since the request_sock isn't queued on the parent
socket until *after* the SYN-ACK packet is sent, we can't lookup the
request_sock to determine the correct label for the packet; at this
point in time the best we can do is simply pass/NF_ACCEPT the packet.
It must be said that simply passing the packet without any explicit
labeling action, while far from ideal, is not terrible as the SYN-ACK
packet will inherit any IP option based labeling from the initial
connection request so the label *should* be correct and all our
access controls remain in place so we shouldn't have to worry about
information leaks.
Reported-by: Janak Desai <Janak.Desai@gtri.gatech.edu>
Tested-by: Janak Desai <Janak.Desai@gtri.gatech.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Moore <pmoore@redhat.com>
The new templates management mechanism records information associated
to an event into an array of 'ima_field_data' structures and makes it
available through the 'template_data' field of the 'ima_template_entry'
structure (the element of the measurements list created by IMA).
Since 'ima_field_data' contains dynamically allocated data (which length
varies depending on the data associated to a selected template field),
it is not enough to just free the memory reserved for a
'ima_template_entry' structure if something goes wrong.
This patch creates the new function ima_free_template_entry() which
walks the array of 'ima_field_data' structures, frees the memory
referenced by the 'data' pointer and finally the space reserved for
the 'ima_template_entry' structure. Further, it replaces existing kfree()
that have a pointer to an 'ima_template_entry' structure as argument
with calls to the new function.
Fixes: a71dc65: ima: switch to new template management mechanism
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
7bc5f447ce (ima: define new function ima_alloc_init_template() to
API) moved the initialization of 'entry' in ima_add_boot_aggregate() a
bit more below, after the if (ima_used_chip).
So, 'entry' is not initialized while being inside this if-block. So, we
should not attempt to free it.
Found by Coverity (CID: 1131971)
Fixes: 7bc5f447ce (ima: define new function ima_alloc_init_template() to API)
Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
We have a problem where the big_key key storage implementation uses a
shmem backed inode to hold the key contents. Because of this detail of
implementation LSM checks are being done between processes trying to
read the keys and the tmpfs backed inode. The LSM checks are already
being handled on the key interface level and should not be enforced at
the inode level (since the inode is an implementation detail, not a
part of the security model)
This patch implements a new function shmem_kernel_file_setup() which
returns the equivalent to shmem_file_setup() only the underlying inode
has S_PRIVATE set. This means that all LSM checks for the inode in
question are skipped. It should only be used for kernel internal
operations where the inode is not exposed to userspace without proper
LSM checking. It is possible that some other users of
shmem_file_setup() should use the new interface, but this has not been
explored.
Reproducing this bug is a little bit difficult. The steps I used on
Fedora are:
(1) Turn off selinux enforcing:
setenforce 0
(2) Create a huge key
k=`dd if=/dev/zero bs=8192 count=1 | keyctl padd big_key test-key @s`
(3) Access the key in another context:
runcon system_u:system_r:httpd_t:s0-s0:c0.c1023 keyctl print $k >/dev/null
(4) Examine the audit logs:
ausearch -m AVC -i --subject httpd_t | audit2allow
If the last command's output includes a line that looks like:
allow httpd_t user_tmpfs_t:file { open read };
There was an inode check between httpd and the tmpfs filesystem. With
this patch no such denial will be seen. (NOTE! you should clear your
audit log if you have tested for this previously)
(Please return you box to enforcing)
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Hugh Dickins <hughd@google.com>
cc: linux-mm@kvack.org
If a keyring contains more than 16 keyrings (the capacity of a single node in
the associative array) then those keyrings are split over multiple nodes
arranged as a tree.
If search_nested_keyrings() is called to search the keyring then it will
attempt to manually walk over just the 0 branch of the associative array tree
where all the keyring links are stored. This works provided the key is found
before the algorithm steps from one node containing keyrings to a child node
or if there are sufficiently few keyring links that the keyrings are all in
one node.
However, if the algorithm does need to step from a node to a child node, it
doesn't change the node pointer unless a shortcut also gets transited. This
means that the algorithm will keep scanning the same node over and over again
without terminating and without returning.
To fix this, move the internal-pointer-to-node translation from inside the
shortcut transit handler so that it applies it to node arrival as well.
This can be tested by:
r=`keyctl newring sandbox @s`
for ((i=0; i<=16; i++)); do keyctl newring ring$i $r; done
for ((i=0; i<=16; i++)); do keyctl add user a$i a %:ring$i; done
for ((i=0; i<=16; i++)); do keyctl search $r user a$i; done
for ((i=17; i<=20; i++)); do keyctl search $r user a$i; done
The searches should all complete successfully (or with an error for 17-20),
but instead one or more of them will hang.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Stephen Gallagher <sgallagh@redhat.com>
If sufficient keys (or keyrings) are added into a keyring such that a node in
the associative array's tree overflows (each node has a capacity N, currently
16) and such that all N+1 keys have the same index key segment for that level
of the tree (the level'th nibble of the index key), then assoc_array_insert()
calls ops->diff_objects() to indicate at which bit position the two index keys
vary.
However, __key_link_begin() passes a NULL object to assoc_array_insert() with
the intention of supplying the correct pointer later before we commit the
change. This means that keyring_diff_objects() is given a NULL pointer as one
of its arguments which it does not expect. This results in an oops like the
attached.
With the previous patch to fix the keyring hash function, this can be forced
much more easily by creating a keyring and only adding keyrings to it. Add any
other sort of key and a different insertion path is taken - all 16+1 objects
must want to cluster in the same node slot.
This can be tested by:
r=`keyctl newring sandbox @s`
for ((i=0; i<=16; i++)); do keyctl newring ring$i $r; done
This should work fine, but oopses when the 17th keyring is added.
Since ops->diff_objects() is always called with the first pointer pointing to
the object to be inserted (ie. the NULL pointer), we can fix the problem by
changing the to-be-inserted object pointer to point to the index key passed
into assoc_array_insert() instead.
Whilst we're at it, we also switch the arguments so that they are the same as
for ->compare_object().
BUG: unable to handle kernel NULL pointer dereference at 0000000000000088
IP: [<ffffffff81191ee4>] hash_key_type_and_desc+0x18/0xb0
...
RIP: 0010:[<ffffffff81191ee4>] hash_key_type_and_desc+0x18/0xb0
...
Call Trace:
[<ffffffff81191f9d>] keyring_diff_objects+0x21/0xd2
[<ffffffff811f09ef>] assoc_array_insert+0x3b6/0x908
[<ffffffff811929a7>] __key_link_begin+0x78/0xe5
[<ffffffff81191a2e>] key_create_or_update+0x17d/0x36a
[<ffffffff81192e0a>] SyS_add_key+0x123/0x183
[<ffffffff81400ddb>] tracesys+0xdd/0xe2
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Stephen Gallagher <sgallagh@redhat.com>
The keyring hash function (used by the associative array) is supposed to clear
the bottommost nibble of the index key (where the hash value resides) for
keyrings and make sure it is non-zero for non-keyrings. This is done to make
keyrings cluster together on one branch of the tree separately to other keys.
Unfortunately, the wrong mask is used, so only the bottom two bits are
examined and cleared and not the whole bottom nibble. This means that keys
and keyrings can still be successfully searched for under most circumstances
as the hash is consistent in its miscalculation, but if a keyring's
associative array bottom node gets filled up then approx 75% of the keyrings
will not be put into the 0 branch.
The consequence of this is that a key in a keyring linked to by another
keyring, ie.
keyring A -> keyring B -> key
may not be found if the search starts at keyring A and then descends into
keyring B because search_nested_keyrings() only searches up the 0 branch (as it
"knows" all keyrings must be there and not elsewhere in the tree).
The fix is to use the right mask.
This can be tested with:
r=`keyctl newring sandbox @s`
for ((i=0; i<=16; i++)); do keyctl newring ring$i $r; done
for ((i=0; i<=16; i++)); do keyctl add user a$i a %:ring$i; done
for ((i=0; i<=16; i++)); do keyctl search $r user a$i; done
This creates a sandbox keyring, then creates 17 keyrings therein (labelled
ring0..ring16). This causes the root node of the sandbox's associative array
to overflow and for the tree to have extra nodes inserted.
Each keyring then is given a user key (labelled aN for ringN) for us to search
for.
We then search for the user keys we added, starting from the sandbox. If
working correctly, it should return the same ordered list of key IDs as
for...keyctl add... did. Without this patch, it reports ENOKEY "Required key
not available" for some of the keys. Just which keys get this depends as the
kernel pointer to the key type forms part of the hash function.
Reported-by: Nalin Dahyabhai <nalin@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Stephen Gallagher <sgallagh@redhat.com>
The second word of key->payload does not get initialised in key_alloc(), but
the big_key type is relying on it having been cleared. The problem comes when
big_key fails to instantiate a large key and doesn't then set the payload. The
big_key_destroy() op is called from the garbage collector and this assumes that
the dentry pointer stored in the second word will be NULL if instantiation did
not complete.
Therefore just pre-clear the entire struct key on allocation rather than trying
to be clever and only initialising to 0 only those bits that aren't otherwise
initialised.
The lack of initialisation can lead to a bug report like the following if
big_key failed to initialise its file:
general protection fault: 0000 [#1] SMP
Modules linked in: ...
CPU: 0 PID: 51 Comm: kworker/0:1 Not tainted 3.10.0-53.el7.x86_64 #1
Hardware name: Dell Inc. PowerEdge 1955/0HC513, BIOS 1.4.4 12/09/2008
Workqueue: events key_garbage_collector
task: ffff8801294f5680 ti: ffff8801296e2000 task.ti: ffff8801296e2000
RIP: 0010:[<ffffffff811b4a51>] dput+0x21/0x2d0
...
Call Trace:
[<ffffffff811a7b06>] path_put+0x16/0x30
[<ffffffff81235604>] big_key_destroy+0x44/0x60
[<ffffffff8122dc4b>] key_gc_unused_keys.constprop.2+0x5b/0xe0
[<ffffffff8122df2f>] key_garbage_collector+0x1df/0x3c0
[<ffffffff8107759b>] process_one_work+0x17b/0x460
[<ffffffff8107834b>] worker_thread+0x11b/0x400
[<ffffffff81078230>] ? rescuer_thread+0x3e0/0x3e0
[<ffffffff8107eb00>] kthread+0xc0/0xd0
[<ffffffff8107ea40>] ? kthread_create_on_node+0x110/0x110
[<ffffffff815c4bec>] ret_from_fork+0x7c/0xb0
[<ffffffff8107ea40>] ? kthread_create_on_node+0x110/0x110
Reported-by: Patrik Kis <pkis@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Stephen Gallagher <sgallagh@redhat.com>
This patch stores the address of the 'template_fmt_copy' variable in a new
variable, called 'template_fmt_ptr', so that the latter is passed as an
argument of strsep() instead of the former. This modification is needed
in order to correctly free the memory area referenced by
'template_fmt_copy' (strsep() modifies the pointer of the passed string).
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Free 'ctx_str' when necessary.
Signed-off-by: Geyslan G. Bem <geyslan@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Moore <pmoore@redhat.com>
This patch defines a new value for the 'ima_show_type' enumerator
(IMA_SHOW_BINARY_NO_FIELD_LEN) to prevent that the field length
is transmitted through the 'binary_runtime_measurements' interface
for the digest field of the 'ima' template.
Fixes commit: 3ce1217 ima: define template fields library and new helpers
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
To maintain compatibility with userspace tools, the field length must not
be included in the template digest calculation for the 'ima' template.
Fixes commit: a71dc65 ima: switch to new template management mechanism
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
This reverts commit 217091dd7a, which
caused the following build error:
security/integrity/digsig.c:70:5: error: redefinition of ‘integrity_init_keyring’
security/integrity/integrity.h:149:12: note: previous definition of ‘integrity_init_keyring’ w
security/integrity/integrity.h:149:12: warning: ‘integrity_init_keyring’ defined but not used
reported by Krzysztof Kolasa. Mimi says:
"I made the classic mistake of requesting this patch to be upstreamed
at the last second, rather than waiting until the next open window.
At this point, the best course would probably be to revert the two
commits and fix them for the next open window"
Reported-by: Krzysztof Kolasa <kkolasa@winsoft.pl>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull security subsystem updates from James Morris:
"In this patchset, we finally get an SELinux update, with Paul Moore
taking over as maintainer of that code.
Also a significant update for the Keys subsystem, as well as
maintenance updates to Smack, IMA, TPM, and Apparmor"
and since I wanted to know more about the updates to key handling,
here's the explanation from David Howells on that:
"Okay. There are a number of separate bits. I'll go over the big bits
and the odd important other bit, most of the smaller bits are just
fixes and cleanups. If you want the small bits accounting for, I can
do that too.
(1) Keyring capacity expansion.
KEYS: Consolidate the concept of an 'index key' for key access
KEYS: Introduce a search context structure
KEYS: Search for auth-key by name rather than target key ID
Add a generic associative array implementation.
KEYS: Expand the capacity of a keyring
Several of the patches are providing an expansion of the capacity of a
keyring. Currently, the maximum size of a keyring payload is one page.
Subtract a small header and then divide up into pointers, that only gives
you ~500 pointers on an x86_64 box. However, since the NFS idmapper uses
a keyring to store ID mapping data, that has proven to be insufficient to
the cause.
Whatever data structure I use to handle the keyring payload, it can only
store pointers to keys, not the keys themselves because several keyrings
may point to a single key. This precludes inserting, say, and rb_node
struct into the key struct for this purpose.
I could make an rbtree of records such that each record has an rb_node
and a key pointer, but that would use four words of space per key stored
in the keyring. It would, however, be able to use much existing code.
I selected instead a non-rebalancing radix-tree type approach as that
could have a better space-used/key-pointer ratio. I could have used the
radix tree implementation that we already have and insert keys into it by
their serial numbers, but that means any sort of search must iterate over
the whole radix tree. Further, its nodes are a bit on the capacious side
for what I want - especially given that key serial numbers are randomly
allocated, thus leaving a lot of empty space in the tree.
So what I have is an associative array that internally is a radix-tree
with 16 pointers per node where the index key is constructed from the key
type pointer and the key description. This means that an exact lookup by
type+description is very fast as this tells us how to navigate directly to
the target key.
I made the data structure general in lib/assoc_array.c as far as it is
concerned, its index key is just a sequence of bits that leads to a
pointer. It's possible that someone else will be able to make use of it
also. FS-Cache might, for example.
(2) Mark keys as 'trusted' and keyrings as 'trusted only'.
KEYS: verify a certificate is signed by a 'trusted' key
KEYS: Make the system 'trusted' keyring viewable by userspace
KEYS: Add a 'trusted' flag and a 'trusted only' flag
KEYS: Separate the kernel signature checking keyring from module signing
These patches allow keys carrying asymmetric public keys to be marked as
being 'trusted' and allow keyrings to be marked as only permitting the
addition or linkage of trusted keys.
Keys loaded from hardware during kernel boot or compiled into the kernel
during build are marked as being trusted automatically. New keys can be
loaded at runtime with add_key(). They are checked against the system
keyring contents and if their signatures can be validated with keys that
are already marked trusted, then they are marked trusted also and can
thus be added into the master keyring.
Patches from Mimi Zohar make this usable with the IMA keyrings also.
(3) Remove the date checks on the key used to validate a module signature.
X.509: Remove certificate date checks
It's not reasonable to reject a signature just because the key that it was
generated with is no longer valid datewise - especially if the kernel
hasn't yet managed to set the system clock when the first module is
loaded - so just remove those checks.
(4) Make it simpler to deal with additional X.509 being loaded into the kernel.
KEYS: Load *.x509 files into kernel keyring
KEYS: Have make canonicalise the paths of the X.509 certs better to deduplicate
The builder of the kernel now just places files with the extension ".x509"
into the kernel source or build trees and they're concatenated by the
kernel build and stuffed into the appropriate section.
(5) Add support for userspace kerberos to use keyrings.
KEYS: Add per-user_namespace registers for persistent per-UID kerberos caches
KEYS: Implement a big key type that can save to tmpfs
Fedora went to, by default, storing kerberos tickets and tokens in tmpfs.
We looked at storing it in keyrings instead as that confers certain
advantages such as tickets being automatically deleted after a certain
amount of time and the ability for the kernel to get at these tokens more
easily.
To make this work, two things were needed:
(a) A way for the tickets to persist beyond the lifetime of all a user's
sessions so that cron-driven processes can still use them.
The problem is that a user's session keyrings are deleted when the
session that spawned them logs out and the user's user keyring is
deleted when the UID is deleted (typically when the last log out
happens), so neither of these places is suitable.
I've added a system keyring into which a 'persistent' keyring is
created for each UID on request. Each time a user requests their
persistent keyring, the expiry time on it is set anew. If the user
doesn't ask for it for, say, three days, the keyring is automatically
expired and garbage collected using the existing gc. All the kerberos
tokens it held are then also gc'd.
(b) A key type that can hold really big tickets (up to 1MB in size).
The problem is that Active Directory can return huge tickets with lots
of auxiliary data attached. We don't, however, want to eat up huge
tracts of unswappable kernel space for this, so if the ticket is
greater than a certain size, we create a swappable shmem file and dump
the contents in there and just live with the fact we then have an
inode and a dentry overhead. If the ticket is smaller than that, we
slap it in a kmalloc()'d buffer"
* 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (121 commits)
KEYS: Fix keyring content gc scanner
KEYS: Fix error handling in big_key instantiation
KEYS: Fix UID check in keyctl_get_persistent()
KEYS: The RSA public key algorithm needs to select MPILIB
ima: define '_ima' as a builtin 'trusted' keyring
ima: extend the measurement list to include the file signature
kernel/system_certificate.S: use real contents instead of macro GLOBAL()
KEYS: fix error return code in big_key_instantiate()
KEYS: Fix keyring quota misaccounting on key replacement and unlink
KEYS: Fix a race between negating a key and reading the error set
KEYS: Make BIG_KEYS boolean
apparmor: remove the "task" arg from may_change_ptraced_domain()
apparmor: remove parent task info from audit logging
apparmor: remove tsk field from the apparmor_audit_struct
apparmor: fix capability to not use the current task, during reporting
Smack: Ptrace access check mode
ima: provide hash algo info in the xattr
ima: enable support for larger default filedata hash algorithms
ima: define kernel parameter 'ima_template=' to change configured default
ima: add Kconfig default measurement list template
...
Pull audit updates from Eric Paris:
"Nothing amazing. Formatting, small bug fixes, couple of fixes where
we didn't get records due to some old VFS changes, and a change to how
we collect execve info..."
Fixed conflict in fs/exec.c as per Eric and linux-next.
* git://git.infradead.org/users/eparis/audit: (28 commits)
audit: fix type of sessionid in audit_set_loginuid()
audit: call audit_bprm() only once to add AUDIT_EXECVE information
audit: move audit_aux_data_execve contents into audit_context union
audit: remove unused envc member of audit_aux_data_execve
audit: Kill the unused struct audit_aux_data_capset
audit: do not reject all AUDIT_INODE filter types
audit: suppress stock memalloc failure warnings since already managed
audit: log the audit_names record type
audit: add child record before the create to handle case where create fails
audit: use given values in tty_audit enable api
audit: use nlmsg_len() to get message payload length
audit: use memset instead of trying to initialize field by field
audit: fix info leak in AUDIT_GET requests
audit: update AUDIT_INODE filter rule to comparator function
audit: audit feature to set loginuid immutable
audit: audit feature to only allow unsetting the loginuid
audit: allow unsetting the loginuid (with priv)
audit: remove CONFIG_AUDIT_LOGINUID_IMMUTABLE
audit: loginuid functions coding style
selinux: apply selinux checks on new audit message types
...
Dynamically allocate a couple of the larger stack variables in order to
reduce the stack footprint below 1024. gcc-4.8
security/selinux/ss/services.c: In function 'security_load_policy':
security/selinux/ss/services.c:1964:1: warning: the frame size of 1104 bytes is larger than 1024 bytes [-Wframe-larger-than=]
}
Also silence a couple of checkpatch warnings at the same time.
WARNING: sizeof policydb should be sizeof(policydb)
+ memcpy(oldpolicydb, &policydb, sizeof policydb);
WARNING: sizeof policydb should be sizeof(policydb)
+ memcpy(&policydb, newpolicydb, sizeof policydb);
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Eric Paris <eparis@parisplace.org>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Update the policy version (POLICYDB_VERSION_CONSTRAINT_NAMES) to allow
holding of policy source info for constraints.
Signed-off-by: Richard Haines <richard_c_haines@btinternet.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Key pointers stored in the keyring are marked in bit 1 to indicate if they
point to a keyring. We need to strip off this bit before using the pointer
when iterating over the keyring for the purpose of looking for links to garbage
collect.
This means that expirable keyrings aren't correctly expiring because the
checker is seeing their key pointer with 2 added to it.
Since the fix for this involves knowing about the internals of the keyring,
key_gc_keyring() is moved to keyring.c and merged into keyring_gc().
This can be tested by:
echo 2 >/proc/sys/kernel/keys/gc_delay
keyctl timeout `keyctl add keyring qwerty "" @s` 2
cat /proc/keys
sleep 5; cat /proc/keys
which should see a keyring called "qwerty" appear in the session keyring and
then disappear after it expires, and:
echo 2 >/proc/sys/kernel/keys/gc_delay
a=`keyctl get_persistent @s`
b=`keyctl add keyring 0 "" $a`
keyctl add user a a $b
keyctl timeout $b 2
cat /proc/keys
sleep 5; cat /proc/keys
which should see a keyring called "0" with a key called "a" in it appear in the
user's persistent keyring (which will be attached to the session keyring) and
then both the "0" keyring and the "a" key should disappear when the "0" keyring
expires.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Simo Sorce <simo@redhat.com>
In the big_key_instantiate() function we return 0 if kernel_write() returns us
an error rather than returning an error. This can potentially lead to
dentry_open() giving a BUG when called from big_key_read() with an unset
tmpfile path.
------------[ cut here ]------------
kernel BUG at fs/open.c:798!
...
RIP: 0010:[<ffffffff8119bbd1>] dentry_open+0xd1/0xe0
...
Call Trace:
[<ffffffff812350c5>] big_key_read+0x55/0x100
[<ffffffff81231084>] keyctl_read_key+0xb4/0xe0
[<ffffffff81231e58>] SyS_keyctl+0xf8/0x1d0
[<ffffffff815bb799>] system_call_fastpath+0x16/0x1b
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Stephen Gallagher <sgallagh@redhat.com>
Pull networking updates from David Miller:
1) The addition of nftables. No longer will we need protocol aware
firewall filtering modules, it can all live in userspace.
At the core of nftables is a, for lack of a better term, virtual
machine that executes byte codes to inspect packet or metadata
(arriving interface index, etc.) and make verdict decisions.
Besides support for loading packet contents and comparing them, the
interpreter supports lookups in various datastructures as
fundamental operations. For example sets are supports, and
therefore one could create a set of whitelist IP address entries
which have ACCEPT verdicts attached to them, and use the appropriate
byte codes to do such lookups.
Since the interpreted code is composed in userspace, userspace can
do things like optimize things before giving it to the kernel.
Another major improvement is the capability of atomically updating
portions of the ruleset. In the existing netfilter implementation,
one has to update the entire rule set in order to make a change and
this is very expensive.
Userspace tools exist to create nftables rules using existing
netfilter rule sets, but both kernel implementations will need to
co-exist for quite some time as we transition from the old to the
new stuff.
Kudos to Patrick McHardy, Pablo Neira Ayuso, and others who have
worked so hard on this.
2) Daniel Borkmann and Hannes Frederic Sowa made several improvements
to our pseudo-random number generator, mostly used for things like
UDP port randomization and netfitler, amongst other things.
In particular the taus88 generater is updated to taus113, and test
cases are added.
3) Support 64-bit rates in HTB and TBF schedulers, from Eric Dumazet
and Yang Yingliang.
4) Add support for new 577xx tigon3 chips to tg3 driver, from Nithin
Sujir.
5) Fix two fatal flaws in TCP dynamic right sizing, from Eric Dumazet,
Neal Cardwell, and Yuchung Cheng.
6) Allow IP_TOS and IP_TTL to be specified in sendmsg() ancillary
control message data, much like other socket option attributes.
From Francesco Fusco.
7) Allow applications to specify a cap on the rate computed
automatically by the kernel for pacing flows, via a new
SO_MAX_PACING_RATE socket option. From Eric Dumazet.
8) Make the initial autotuned send buffer sizing in TCP more closely
reflect actual needs, from Eric Dumazet.
9) Currently early socket demux only happens for TCP sockets, but we
can do it for connected UDP sockets too. Implementation from Shawn
Bohrer.
10) Refactor inet socket demux with the goal of improving hash demux
performance for listening sockets. With the main goals being able
to use RCU lookups on even request sockets, and eliminating the
listening lock contention. From Eric Dumazet.
11) The bonding layer has many demuxes in it's fast path, and an RCU
conversion was started back in 3.11, several changes here extend the
RCU usage to even more locations. From Ding Tianhong and Wang
Yufen, based upon suggestions by Nikolay Aleksandrov and Veaceslav
Falico.
12) Allow stackability of segmentation offloads to, in particular, allow
segmentation offloading over tunnels. From Eric Dumazet.
13) Significantly improve the handling of secret keys we input into the
various hash functions in the inet hashtables, TCP fast open, as
well as syncookies. From Hannes Frederic Sowa. The key fundamental
operation is "net_get_random_once()" which uses static keys.
Hannes even extended this to ipv4/ipv6 fragmentation handling and
our generic flow dissector.
14) The generic driver layer takes care now to set the driver data to
NULL on device removal, so it's no longer necessary for drivers to
explicitly set it to NULL any more. Many drivers have been cleaned
up in this way, from Jingoo Han.
15) Add a BPF based packet scheduler classifier, from Daniel Borkmann.
16) Improve CRC32 interfaces and generic SKB checksum iterators so that
SCTP's checksumming can more cleanly be handled. Also from Daniel
Borkmann.
17) Add a new PMTU discovery mode, IP_PMTUDISC_INTERFACE, which forces
using the interface MTU value. This helps avoid PMTU attacks,
particularly on DNS servers. From Hannes Frederic Sowa.
18) Use generic XPS for transmit queue steering rather than internal
(re-)implementation in virtio-net. From Jason Wang.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1622 commits)
random32: add test cases for taus113 implementation
random32: upgrade taus88 generator to taus113 from errata paper
random32: move rnd_state to linux/random.h
random32: add prandom_reseed_late() and call when nonblocking pool becomes initialized
random32: add periodic reseeding
random32: fix off-by-one in seeding requirement
PHY: Add RTL8201CP phy_driver to realtek
xtsonic: add missing platform_set_drvdata() in xtsonic_probe()
macmace: add missing platform_set_drvdata() in mace_probe()
ethernet/arc/arc_emac: add missing platform_set_drvdata() in arc_emac_probe()
ipv6: protect for_each_sk_fl_rcu in mem_check with rcu_read_lock_bh
vlan: Implement vlan_dev_get_egress_qos_mask as an inline.
ixgbe: add warning when max_vfs is out of range.
igb: Update link modes display in ethtool
netfilter: push reasm skb through instead of original frag skbs
ip6_output: fragment outgoing reassembled skb properly
MAINTAINERS: mv643xx_eth: take over maintainership from Lennart
net_sched: tbf: support of 64bit rates
ixgbe: deleting dfwd stations out of order can cause null ptr deref
ixgbe: fix build err, num_rx_queues is only available with CONFIG_RPS
...
Pull cgroup changes from Tejun Heo:
"Not too much activity this time around. css_id is finally killed and
a minor update to device_cgroup"
* 'for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
device_cgroup: remove can_attach
cgroup: kill css_id
memcg: stop using css id
memcg: fail to create cgroup if the cgroup id is too big
memcg: convert to use cgroup id
memcg: convert to use cgroup_is_descendant()
If the UID is specified by userspace when calling the KEYCTL_GET_PERSISTENT
function and the process does not have the CAP_SETUID capability, then the
function will return -EPERM if the current process's uid, suid, euid and fsuid
all match the requested UID. This is incorrect.
Fix it such that when a non-privileged caller requests a persistent keyring by
a specific UID they can only request their own (ie. the specified UID matches
either then process's UID or the process's EUID).
This can be tested by logging in as the user and doing:
keyctl get_persistent @p
keyctl get_persistent @p `id -u`
keyctl get_persistent @p 0
The first two should successfully print the same key ID. The third should do
the same if called by UID 0 or indicate Operation Not Permitted otherwise.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Stephen Gallagher <sgallagh@redhat.com>
Supress the stock memory allocation failure warnings for audit buffers
since audit alreay takes care of memory allocation failure warnings, including
rate-limiting, in audit_log_start().
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
We use the read check to get the feature set (like AUDIT_GET) and the
write check to set the features (like AUDIT_SET).
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Require all keys added to the IMA keyring be signed by an
existing trusted key on the system trusted keyring.
Changelog:
- define stub integrity_init_keyring() function (reported-by Fengguang Wu)
- differentiate between regular and trusted keyring names.
- replace printk with pr_info (D. Kasatkin)
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
This patch defines a new template called 'ima-sig', which includes
the file signature in the template data, in addition to the file's
digest and pathname.
A template is composed of a set of fields. Associated with each
field is an initialization and display function. This patch defines
a new template field called 'sig', the initialization function
ima_eventsig_init(), and the display function ima_show_template_sig().
This patch modifies the .field_init() function definition to include
the 'security.ima' extended attribute and length.
Changelog:
- remove unused code (Dmitry Kasatkin)
- avoid calling ima_write_template_field_data() unnecesarily (Roberto Sassu)
- rename DATA_FMT_SIG to DATA_FMT_HEX
- cleanup ima_eventsig_init() based on Roberto's comments
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David Howells <dhowells@redhat.com>
If a key is displaced from a keyring by a matching one, then four more bytes
of quota are allocated to the keyring - despite the fact that the keyring does
not change in size.
Further, when a key is unlinked from a keyring, the four bytes of quota
allocated the link isn't recovered and returned to the user's pool.
The first can be tested by repeating:
keyctl add big_key a fred @s
cat /proc/key-users
(Don't put it in a shell loop otherwise the garbage collector won't have time
to clear the displaced keys, thus affecting the result).
This was causing the kerberos keyring to run out of room fairly quickly.
The second can be tested by:
cat /proc/key-users
a=`keyctl add user a a @s`
cat /proc/key-users
keyctl unlink $a
sleep 1 # Give RCU a chance to delete the key
cat /proc/key-users
assuming no system activity that otherwise adds/removes keys, the amount of
key data allocated should go up (say 40/20000 -> 47/20000) and then return to
the original value at the end.
Reported-by: Stephen Gallagher <sgallagh@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Having the big_keys functionality as a module is very marginally useful.
The userspace code that would use this functionality will get odd error
messages from the keys layer if the module isn't loaded. The code itself
is fairly small, so just have this as a boolean option and not a tristate.
Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Unless task == current ptrace_parent(task) is not safe even under
rcu_read_lock() and most of the current users are not right.
So may_change_ptraced_domain(task) looks wrong as well. However it
is always called with task == current so the code is actually fine.
Remove this argument to make this fact clear.
Note: perhaps we should simply kill ptrace_parent(), it buys almost
nothing. And it is obviously racy, perhaps this should be fixed.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
The reporting of the parent task info is a vestage from old versions of
apparmor. The need for this information was removed by unique null-
profiles before apparmor was upstreamed so remove this info from logging.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Now that aa_capabile no longer sets the task field it can be removed
and the lsm_audit version of the field can be used.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Mediation is based off of the cred but auditing includes the current
task which may not be related to the actual request.
Signed-off-by: John Johansen <john.johansen@canonical.com>
When the ptrace security hooks were split the addition of
a mode parameter was not taken advantage of in the Smack
ptrace access check. This changes the access check from
always looking for read and write access to using the
passed mode. This will make use of /proc much happier.
Targeted for git://git.gitorious.org/smack-next/kernel.git
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
All files labeled with 'security.ima' hashes, are hashed using the
same hash algorithm. Changing from one hash algorithm to another,
requires relabeling the filesystem. This patch defines a new xattr
type, which includes the hash algorithm, permitting different files
to be hashed with different algorithms.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
The IMA measurement list contains two hashes - a template data hash
and a filedata hash. The template data hash is committed to the TPM,
which is limited, by the TPM v1.2 specification, to 20 bytes. The
filedata hash is defined as 20 bytes as well.
Now that support for variable length measurement list templates was
added, the filedata hash is not limited to 20 bytes. This patch adds
Kconfig support for defining larger default filedata hash algorithms
and replacing the builtin default with one specified on the kernel
command line.
<uapi/linux/hash_info.h> contains a list of hash algorithms. The
Kconfig default hash algorithm is a subset of this list, but any hash
algorithm included in the list can be specified at boot, using the
'ima_hash=' kernel command line option.
Changelog v2:
- update Kconfig
Changelog:
- support hashes that are configured
- use generic HASH_ALGO_ definitions
- add Kconfig support
- hash_setup must be called only once (Dmitry)
- removed trailing whitespaces (Roberto Sassu)
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
This patch allows users to specify from the kernel command line the
template descriptor, among those defined, that will be used to generate
and display measurement entries. If an user specifies a wrong template,
IMA reverts to the template descriptor set in the kernel configuration.
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
This patch adds a Kconfig option to select the default IMA
measurement list template. The 'ima' template limited the
filedata hash to 20 bytes and the pathname to 255 charaters.
The 'ima-ng' measurement list template permits larger hash
digests and longer pathnames.
Changelog:
- keep 'select CRYPTO_HASH_INFO' in 'config IMA' section (Kconfig)
(Roberto Sassu);
- removed trailing whitespaces (Roberto Sassu).
- Lindent fixes
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
The same hash algorithm should be used for calculating the file
data hash for the IMA measurement list, as for appraising the file
data integrity. (The appraise hash algorithm is stored in the
'security.ima' extended attribute.) The exception is when the
reference file data hash digest, stored in the extended attribute,
is larger than the one supported by the template. In this case,
the file data hash needs to be calculated twice, once for the
measurement list and, again, for appraisal.
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Different files might be signed based on different hash algorithms.
This patch prefixes the audit log measurement hash with the hash
algorithm.
Changelog:
- use generic HASH_ALGO defintions
- use ':' as delimiter between the hash algorithm and the digest
(Roberto Sassu)
- always include the hash algorithm used when audit-logging a measurement
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Peter Moody <pmoody@google.com>
This patch performs the switch to the new template mechanism by modifying
the functions ima_alloc_init_template(), ima_measurements_show() and
ima_ascii_measurements_show(). The old function ima_template_show() was
removed as it is no longer needed. Also, if the template descriptor used
to generate a measurement entry is not 'ima', the whole length of field
data stored for an entry is provided before the data itself through the
binary_runtime_measurement interface.
Changelog:
- unnecessary to use strncmp() (Mimi Zohar)
- create new variable 'field' in ima_alloc_init_template() (Roberto Sassu)
- use GFP_NOFS flag in ima_alloc_init_template() (Roberto Sassu)
- new variable 'num_fields' in ima_store_template() (Roberto Sassu,
proposed by Mimi Zohar)
- rename ima_calc_buffer_hash/template_hash() to ima_calc_field_array_hash(),
something more generic (Mimi, requested by Dmitry)
- sparse error fix - Fengguang Wu
- fix lindent warnings
- always include the field length in the template data length
- include the template field length variable size in the template data length
- include both the template field data and field length in the template digest
calculation. Simplifies verifying the template digest. (Mimi)
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
This patch adds support for the new template 'ima-ng', whose format
is defined as 'd-ng|n-ng'. These new field definitions remove the
size limitations of the original 'ima' template. Further, the 'd-ng'
field prefixes the inode digest with the hash algorithim, when
displaying the new larger digest sizes.
Change log:
- scripts/Lindent fixes - Mimi
- "always true comparison" - reported by Fengguang Wu, resolved Dmitry
- initialize hash_algo variable to HASH_ALGO__LAST
- always prefix digest with hash algorithm - Mimi
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
This patch defines a library containing two initial template fields,
inode digest (d) and file name (n), the 'ima' template descriptor,
whose format is 'd|n', and two helper functions,
ima_write_template_field_data() and ima_show_template_field_data().
Changelog:
- replace ima_eventname_init() parameter NULL checking with BUG_ON.
(suggested by Mimi)
- include "new template fields for inode digest (d) and file name (n)"
definitions to fix a compiler warning. - Mimi
- unnecessary to prefix static function names with 'ima_'. remove
prefix to resolve Lindent formatting changes. - Mimi
- abbreviated/removed inline comments - Mimi
- always send the template field length - Mimi
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
The original 'ima' template is fixed length, containing the filedata hash
and pathname. The filedata hash is limited to 20 bytes (md5/sha1). The
pathname is a null terminated string, limited to 255 characters. To
overcome these limitations and to add additional file metadata, it is
necessary to extend the current version of IMA by defining additional
templates.
The main reason to introduce this feature is that, each time a new
template is defined, the functions that generate and display the
measurement list would include the code for handling a new format and,
thus, would significantly grow over time.
This patch set solves this problem by separating the template management
from the remaining IMA code. The core of this solution is the definition
of two new data structures: a template descriptor, to determine which
information should be included in the measurement list, and a template
field, to generate and display data of a given type.
To define a new template field, developers define the field identifier
and implement two functions, init() and show(), respectively to generate
and display measurement entries. Initially, this patch set defines the
following template fields (support for additional data types will be
added later):
- 'd': the digest of the event (i.e. the digest of a measured file),
calculated with the SHA1 or MD5 hash algorithm;
- 'n': the name of the event (i.e. the file name), with size up to
255 bytes;
- 'd-ng': the digest of the event, calculated with an arbitrary hash
algorithm (field format: [<hash algo>:]digest, where the digest
prefix is shown only if the hash algorithm is not SHA1 or MD5);
- 'n-ng': the name of the event, without size limitations.
Defining a new template descriptor requires specifying the template format,
a string of field identifiers separated by the '|' character. This patch
set defines the following template descriptors:
- "ima": its format is 'd|n';
- "ima-ng" (default): its format is 'd-ng|n-ng'
Further details about the new template architecture can be found in
Documentation/security/IMA-templates.txt.
Changelog:
- don't defer calling ima_init_template() - Mimi
- don't define ima_lookup_template_desc() until used - Mimi
- squashed with documentation patch - Mimi
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Instead of allocating and initializing the template entry from multiple
places (eg. boot aggregate, violation, and regular measurements), this
patch defines a new function called ima_alloc_init_template(). The new
function allocates and initializes the measurement entry with the inode
digest and the filename.
In respect to the current behavior, it truncates the file name passed
in the 'filename' argument if the latter's size is greater than 255 bytes
and the passed file descriptor is NULL.
Changelog:
- initialize 'hash' variable for non TPM case - Mimi
- conform to expectation for 'iint' to be defined as a pointer. - Mimi
- add missing 'file' dependency for recalculating file hash. - Mimi
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Pass the filename argument to ima_add_template_entry() in order to
eliminate a dependency on template specific data (third argument of
integrity_audit_msg).
This change is required because, with the new template management
mechanism, the generation of a new measurement entry will be performed
by new specific functions (introduced in next patches) and the current IMA
code will not be aware anymore of how data is stored in the entry payload.
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Pass the file descriptor instead of the inode to ima_add_violation(),
to make the latter consistent with ima_store_measurement() in
preparation for the new template architecture.
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
With multiple hash algorithms, ima_hash_tfm is no longer guaranteed to be sha1.
Need to force to use sha1.
Changelog:
- pass ima_digest_data to ima_calc_boot_aggregate() instead of char *
(Roberto Sassu);
- create an ima_digest_data structure in ima_add_boot_aggregate()
(Roberto Sassu);
- pass hash->algo to ima_alloc_tfm() (Roberto Sassu, reported by Dmitry).
- "move hash definition in ima_add_boot_aggregate()" commit hunk to here.
- sparse warning fix - Fengguang Wu
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
ima_calc_buffer_hash will be used with different hash algorithms.
This patch provides support for arbitrary hash algorithms in
ima_calc_buffer_hash.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
This patch provides dedicated hash algo allocation and
deallocation function which can be used by different clients.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
The TPM v1.2 limits the template hash size to 20 bytes. This
patch differentiates between the template hash size, as defined
in the ima_template_entry, and the file data hash size, as
defined in the ima_template_data. Subsequent patches add support
for different file data hash algorithms.
Change log:
- hash digest definition in ima_store_template() should be TPM_DIGEST_SIZE
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
For each inode in the IMA policy, an iint is allocated. To support
larger hash digests, the iint digest size changed from 20 bytes to
the maximum supported hash digest size. Instead of allocating the
maximum size, which most likely is not needed, this patch dynamically
allocates the needed hash storage.
Changelog:
- fix krealloc bug
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
For possibility to use xattr type for new signature formats,
pass full xattr to the signature verification function.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
All files on the filesystem, currently, are hashed using the same hash
algorithm. In preparation for files from different packages being
signed using different hash algorithms, this patch adds support for
reading the signature hash algorithm from the 'security.ima' extended
attribute and calculates the appropriate file data hash based on it.
Changelog:
- fix scripts Lindent and checkpatch msgs - Mimi
- fix md5 support for older version, which occupied 20 bytes in the
xattr, not the expected 16 bytes. Fix the comparison to compare
only the first 16 bytes.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
In preparation of supporting more hash algorithms with larger hash sizes
needed for signature verification, this patch replaces the 20 byte sized
digest, with a more flexible structure. The new structure includes the
hash algorithm, digest size, and digest.
Changelog:
- recalculate filedata hash for the measurement list, if the signature
hash digest size is greater than 20 bytes.
- use generic HASH_ALGO_
- make ima_calc_file_hash static
- scripts lindent and checkpatch fixes
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
This reverts commit 4c2c392763.
Everything in the initramfs should be measured and appraised,
but until the initramfs has extended attribute support, at
least measured.
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Cc: Stable Kernel <stable@kernel.org>
It is really only wanting to duplicate a check which is already done by the
cgroup subsystem.
With this patch, user jdoe still cannot move pid 1 into a devices cgroup
he owns, but now he can move his own other tasks into devices cgroups.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Aristeu Rozanski <aris@redhat.com>
Conflicts:
drivers/net/usb/qmi_wwan.c
include/net/dst.h
Trivial merge conflicts, both were overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
Linux file locking does not follow the same rules
as other mechanisms. Even though it is a write operation
a process can set a read lock on files which it has open
only for read access. Two programs with read access to
a file can use read locks to communicate.
This is not acceptable in a Mandatory Access Control
environment. Smack treats setting a read lock as the
write operation that it is. Unfortunately, many programs
assume that setting a read lock is a read operation.
These programs are unhappy in the Smack environment.
This patch introduces a new access mode (lock) to address
this problem. A process with lock access to a file can
set a read lock. A process with write access to a file can
set a read lock or a write lock. This prevents a situation
where processes are granted write access just so they can
set read locks.
Targeted for git://git.gitorious.org/smack-next/kernel.git
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
BugLink: http://bugs.launchpad.net/bugs/1235977
The profile introspection seq file has a locking bug when policy is viewed
from a virtual root (task in a policy namespace), introspection from the
real root is not affected.
The test for root
while (parent) {
is correct for the real root, but incorrect for tasks in a policy namespace.
This allows the task to walk backup the policy tree past its virtual root
causing it to be unlocked before the virtual root should be in the p_stop
fn.
This results in the following lockdep back trace:
[ 78.479744] [ BUG: bad unlock balance detected! ]
[ 78.479792] 3.11.0-11-generic #17 Not tainted
[ 78.479838] -------------------------------------
[ 78.479885] grep/2223 is trying to release lock (&ns->lock) at:
[ 78.479952] [<ffffffff817bf3be>] mutex_unlock+0xe/0x10
[ 78.480002] but there are no more locks to release!
[ 78.480037]
[ 78.480037] other info that might help us debug this:
[ 78.480037] 1 lock held by grep/2223:
[ 78.480037] #0: (&p->lock){+.+.+.}, at: [<ffffffff812111bd>] seq_read+0x3d/0x3d0
[ 78.480037]
[ 78.480037] stack backtrace:
[ 78.480037] CPU: 0 PID: 2223 Comm: grep Not tainted 3.11.0-11-generic #17
[ 78.480037] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 78.480037] ffffffff817bf3be ffff880007763d60 ffffffff817b97ef ffff8800189d2190
[ 78.480037] ffff880007763d88 ffffffff810e1c6e ffff88001f044730 ffff8800189d2190
[ 78.480037] ffffffff817bf3be ffff880007763e00 ffffffff810e5bd6 0000000724fe56b7
[ 78.480037] Call Trace:
[ 78.480037] [<ffffffff817bf3be>] ? mutex_unlock+0xe/0x10
[ 78.480037] [<ffffffff817b97ef>] dump_stack+0x54/0x74
[ 78.480037] [<ffffffff810e1c6e>] print_unlock_imbalance_bug+0xee/0x100
[ 78.480037] [<ffffffff817bf3be>] ? mutex_unlock+0xe/0x10
[ 78.480037] [<ffffffff810e5bd6>] lock_release_non_nested+0x226/0x300
[ 78.480037] [<ffffffff817bf2fe>] ? __mutex_unlock_slowpath+0xce/0x180
[ 78.480037] [<ffffffff817bf3be>] ? mutex_unlock+0xe/0x10
[ 78.480037] [<ffffffff810e5d5c>] lock_release+0xac/0x310
[ 78.480037] [<ffffffff817bf2b3>] __mutex_unlock_slowpath+0x83/0x180
[ 78.480037] [<ffffffff817bf3be>] mutex_unlock+0xe/0x10
[ 78.480037] [<ffffffff81376c91>] p_stop+0x51/0x90
[ 78.480037] [<ffffffff81211408>] seq_read+0x288/0x3d0
[ 78.480037] [<ffffffff811e9d9e>] vfs_read+0x9e/0x170
[ 78.480037] [<ffffffff811ea8cc>] SyS_read+0x4c/0xa0
[ 78.480037] [<ffffffff817ccc9d>] system_call_fastpath+0x1a/0x1f
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Pass the hook ops to the hookfn to allow for generic hook
functions. This change is required by nf_tables.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
CONFIG_IPV6=n is still a valid choice ;)
It appears we can remove dead code.
Reported-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TCP listener refactoring, part 4 :
To speed up inet lookups, we moved IPv4 addresses from inet to struct
sock_common
Now is time to do the same for IPv6, because it permits us to have fast
lookups for all kind of sockets, including upcoming SYN_RECV.
Getting IPv6 addresses in TCP lookups currently requires two extra cache
lines, plus a dereference (and memory stall).
inet6_sk(sk) does the dereference of inet_sk(__sk)->pinet6
This patch is way bigger than its IPv4 counter part, because for IPv4,
we could add aliases (inet_daddr, inet_rcv_saddr), while on IPv6,
it's not doable easily.
inet6_sk(sk)->daddr becomes sk->sk_v6_daddr
inet6_sk(sk)->rcv_saddr becomes sk->sk_v6_rcv_saddr
And timewait socket also have tw->tw_v6_daddr & tw->tw_v6_rcv_saddr
at the same offset.
We get rid of INET6_TW_MATCH() as INET6_MATCH() is now the generic
macro.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
.. so get rid of it. The only indirect users were all the
avc_has_perm() callers which just expanded to have a zero flags
argument.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Every single user passes in '0'. I think we had non-zero users back in
some stone age when selinux_inode_permission() was implemented in terms
of inode_has_perm(), but that complicated case got split up into a
totally separate code-path so that we could optimize the much simpler
special cases.
See commit 2e33405785 ("SELinux: delay initialization of audit data in
selinux_inode_permission") for example.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Conflicts:
drivers/net/ethernet/emulex/benet/be.h
drivers/net/usb/qmi_wwan.c
drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h
include/net/netfilter/nf_conntrack_synproxy.h
include/net/secure_seq.h
The conflicts are of two varieties:
1) Conflicts with Joe Perches's 'extern' removal from header file
function declarations. Usually it's an argument signature change
or a function being added/removed. The resolutions are trivial.
2) Some overlapping changes in qmi_wwan.c and be.h, one commit adds
a new value, another changes an existing value. That sort of
thing.
Signed-off-by: David S. Miller <davem@davemloft.net>
- Move sysctl_local_ports from a global variable into struct netns_ipv4.
- Modify inet_get_local_port_range to take a struct net, and update all
of the callers.
- Move the initialization of sysctl_local_ports into
sysctl_net_ipv4.c:ipv4_sysctl_init_net from inet_connection_sock.c
v2:
- Ensure indentation used tabs
- Fixed ip.h so it applies cleanly to todays net-next
v3:
- Compile fixes of strange callers of inet_get_local_port_range.
This patch now successfully passes an allmodconfig build.
Removed manual inlining of inet_get_local_port_range in ipv4_local_port_range
Originally-by: Samya <samya@twitter.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the shash interface, rather than the hash interface, when hashing
AppArmor profiles. The shash interface does not use scatterlists and it
is a better fit for what AppArmor needs.
This fixes a kernel paging BUG when aa_calc_profile_hash() is passed a
buffer from vmalloc(). The hash interface requires callers to handle
vmalloc() buffers differently than what AppArmor was doing. Due to
vmalloc() memory not being physically contiguous, each individual page
behind the buffer must be assigned to a scatterlist with sg_set_page()
and then the scatterlist passed to crypto_hash_update().
The shash interface does not have that limitation and allows vmalloc()
and kmalloc() buffers to be handled in the same manner.
BugLink: https://launchpad.net/bugs/1216294/
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=62261
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
In order to create the integrity keyrings (eg. _evm, _ima), root's
uid and session keyrings need to be initialized early.
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Add KEY_FLAG_TRUSTED to indicate that a key either comes from a trusted source
or had a cryptographic signature chain that led back to a trusted key the
kernel already possessed.
Add KEY_FLAGS_TRUSTED_ONLY to indicate that a keyring will only accept links to
keys marked with KEY_FLAGS_TRUSTED.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Add support for per-user_namespace registers of persistent per-UID kerberos
caches held within the kernel.
This allows the kerberos cache to be retained beyond the life of all a user's
processes so that the user's cron jobs can work.
The kerberos cache is envisioned as a keyring/key tree looking something like:
struct user_namespace
\___ .krb_cache keyring - The register
\___ _krb.0 keyring - Root's Kerberos cache
\___ _krb.5000 keyring - User 5000's Kerberos cache
\___ _krb.5001 keyring - User 5001's Kerberos cache
\___ tkt785 big_key - A ccache blob
\___ tkt12345 big_key - Another ccache blob
Or possibly:
struct user_namespace
\___ .krb_cache keyring - The register
\___ _krb.0 keyring - Root's Kerberos cache
\___ _krb.5000 keyring - User 5000's Kerberos cache
\___ _krb.5001 keyring - User 5001's Kerberos cache
\___ tkt785 keyring - A ccache
\___ krbtgt/REDHAT.COM@REDHAT.COM big_key
\___ http/REDHAT.COM@REDHAT.COM user
\___ afs/REDHAT.COM@REDHAT.COM user
\___ nfs/REDHAT.COM@REDHAT.COM user
\___ krbtgt/KERNEL.ORG@KERNEL.ORG big_key
\___ http/KERNEL.ORG@KERNEL.ORG big_key
What goes into a particular Kerberos cache is entirely up to userspace. Kernel
support is limited to giving you the Kerberos cache keyring that you want.
The user asks for their Kerberos cache by:
krb_cache = keyctl_get_krbcache(uid, dest_keyring);
The uid is -1 or the user's own UID for the user's own cache or the uid of some
other user's cache (requires CAP_SETUID). This permits rpc.gssd or whatever to
mess with the cache.
The cache returned is a keyring named "_krb.<uid>" that the possessor can read,
search, clear, invalidate, unlink from and add links to. Active LSMs get a
chance to rule on whether the caller is permitted to make a link.
Each uid's cache keyring is created when it first accessed and is given a
timeout that is extended each time this function is called so that the keyring
goes away after a while. The timeout is configurable by sysctl but defaults to
three days.
Each user_namespace struct gets a lazily-created keyring that serves as the
register. The cache keyrings are added to it. This means that standard key
search and garbage collection facilities are available.
The user_namespace struct's register goes away when it does and anything left
in it is then automatically gc'd.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Simo Sorce <simo@redhat.com>
cc: Serge E. Hallyn <serge.hallyn@ubuntu.com>
cc: Eric W. Biederman <ebiederm@xmission.com>
Implement a big key type that can save its contents to tmpfs and thus
swapspace when memory is tight. This is useful for Kerberos ticket caches.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Simo Sorce <simo@redhat.com>
Expand the capacity of a keyring to be able to hold a lot more keys by using
the previously added associative array implementation. Currently the maximum
capacity is:
(PAGE_SIZE - sizeof(header)) / sizeof(struct key *)
which, on a 64-bit system, is a little more 500. However, since this is being
used for the NFS uid mapper, we need more than that. The new implementation
gives us effectively unlimited capacity.
With some alterations, the keyutils testsuite runs successfully to completion
after this patch is applied. The alterations are because (a) keyrings that
are simply added to no longer appear ordered and (b) some of the errors have
changed a bit.
Signed-off-by: David Howells <dhowells@redhat.com>
Drop the permissions argument from __keyring_search_one() as the only caller
passes 0 here - which causes all checks to be skipped.
Signed-off-by: David Howells <dhowells@redhat.com>
Define a __key_get() wrapper to use rather than atomic_inc() on the key usage
count as this makes it easier to hook in refcount error debugging.
Signed-off-by: David Howells <dhowells@redhat.com>
Search for auth-key by name rather than by target key ID as, in a future
patch, we'll by searching directly by index key in preference to iteration
over all keys.
Signed-off-by: David Howells <dhowells@redhat.com>
Search functions pass around a bunch of arguments, each of which gets copied
with each call. Introduce a search context structure to hold these.
Whilst we're at it, create a search flag that indicates whether the search
should be directly to the description or whether it should iterate through all
keys looking for a non-description match.
This will be useful when keyrings use a generic data struct with generic
routines to manage their content as the search terms can just be passed
through to the iterator callback function.
Also, for future use, the data to be supplied to the match function is
separated from the description pointer in the search context. This makes it
clear which is being supplied.
Signed-off-by: David Howells <dhowells@redhat.com>
Consolidate the concept of an 'index key' for accessing keys. The index key
is the search term needed to find a key directly - basically the key type and
the key description. We can add to that the description length.
This will be useful when turning a keyring into an associative array rather
than just a pointer block.
Signed-off-by: David Howells <dhowells@redhat.com>
Skip key state checks (invalidation, revocation and expiration) when checking
for possession. Without this, keys that have been marked invalid, revoked
keys and expired keys are not given a possession attribute - which means the
possessor is not granted any possession permits and cannot do anything with
them unless they also have one a user, group or other permit.
This causes failures in the keyutils test suite's revocation and expiration
tests now that commit 96b5c8fea6 reduced the
initial permissions granted to a key.
The failures are due to accesses to revoked and expired keys being given
EACCES instead of EKEYREVOKED or EKEYEXPIRED.
Signed-off-by: David Howells <dhowells@redhat.com>
Back when we had half ass LSM stacking we had to link capabilities.o
after bigger LSMs so that on initialization the bigger LSM would
register first and the capabilities module would be the one stacked as
the 'seconday'. Somewhere around 6f0f0fd496 (back in 2008) we
finally removed the last of the kinda module stacking code but this
comment in the makefile still lives today.
Reported-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Conflicts:
security/selinux/hooks.c
Pull Eric's existing SELinux tree as there are a number of patches in
there that are not yet upstream. There was some minor fixup needed to
resolve a conflict in security/selinux/hooks.c:selinux_set_mnt_opts()
between the labeled NFS patches and Eric's security_fs_use()
simplification patch.
Pull namespace changes from Eric Biederman:
"This is an assorted mishmash of small cleanups, enhancements and bug
fixes.
The major theme is user namespace mount restrictions. nsown_capable
is killed as it encourages not thinking about details that need to be
considered. A very hard to hit pid namespace exiting bug was finally
tracked and fixed. A couple of cleanups to the basic namespace
infrastructure.
Finally there is an enhancement that makes per user namespace
capabilities usable as capabilities, and an enhancement that allows
the per userns root to nice other processes in the user namespace"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
userns: Kill nsown_capable it makes the wrong thing easy
capabilities: allow nice if we are privileged
pidns: Don't have unshare(CLONE_NEWPID) imply CLONE_THREAD
userns: Allow PR_CAPBSET_DROP in a user namespace.
namespaces: Simplify copy_namespaces so it is clear what is going on.
pidns: Fix hang in zap_pid_ns_processes by sending a potentially extra wakeup
sysfs: Restrict mounting sysfs
userns: Better restrictions on when proc and sysfs can be mounted
vfs: Don't copy mount bind mounts of /proc/<pid>/ns/mnt between namespaces
kernel/nsproxy.c: Improving a snippet of code.
proc: Restrict mounting the proc filesystem
vfs: Lock in place mounts from more privileged users
Pull security subsystem updates from James Morris:
"Nothing major for this kernel, just maintenance updates"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (21 commits)
apparmor: add the ability to report a sha1 hash of loaded policy
apparmor: export set of capabilities supported by the apparmor module
apparmor: add the profile introspection file to interface
apparmor: add an optional profile attachment string for profiles
apparmor: add interface files for profiles and namespaces
apparmor: allow setting any profile into the unconfined state
apparmor: make free_profile available outside of policy.c
apparmor: rework namespace free path
apparmor: update how unconfined is handled
apparmor: change how profile replacement update is done
apparmor: convert profile lists to RCU based locking
apparmor: provide base for multiple profiles to be replaced at once
apparmor: add a features/policy dir to interface
apparmor: enable users to query whether apparmor is enabled
apparmor: remove minimum size check for vmalloc()
Smack: parse multiple rules per write to load2, up to PAGE_SIZE-1 bytes
Smack: network label match fix
security: smack: add a hash table to quicken smk_find_entry()
security: smack: fix memleak in smk_write_rules_list()
xattr: Constify ->name member of "struct xattr".
...
Pull networking changes from David Miller:
"Noteworthy changes this time around:
1) Multicast rejoin support for team driver, from Jiri Pirko.
2) Centralize and simplify TCP RTT measurement handling in order to
reduce the impact of bad RTO seeding from SYN/ACKs. Also, when
both timestamps and local RTT measurements are available prefer
the later because there are broken middleware devices which
scramble the timestamp.
From Yuchung Cheng.
3) Add TCP_NOTSENT_LOWAT socket option to limit the amount of kernel
memory consumed to queue up unsend user data. From Eric Dumazet.
4) Add a "physical port ID" abstraction for network devices, from
Jiri Pirko.
5) Add a "suppress" operation to influence fib_rules lookups, from
Stefan Tomanek.
6) Add a networking development FAQ, from Paul Gortmaker.
7) Extend the information provided by tcp_probe and add ipv6 support,
from Daniel Borkmann.
8) Use RCU locking more extensively in openvswitch data paths, from
Pravin B Shelar.
9) Add SCTP support to openvswitch, from Joe Stringer.
10) Add EF10 chip support to SFC driver, from Ben Hutchings.
11) Add new SYNPROXY netfilter target, from Patrick McHardy.
12) Compute a rate approximation for sending in TCP sockets, and use
this to more intelligently coalesce TSO frames. Furthermore, add
a new packet scheduler which takes advantage of this estimate when
available. From Eric Dumazet.
13) Allow AF_PACKET fanouts with random selection, from Daniel
Borkmann.
14) Add ipv6 support to vxlan driver, from Cong Wang"
Resolved conflicts as per discussion.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1218 commits)
openvswitch: Fix alignment of struct sw_flow_key.
netfilter: Fix build errors with xt_socket.c
tcp: Add missing braces to do_tcp_setsockopt
caif: Add missing braces to multiline if in cfctrl_linkup_request
bnx2x: Add missing braces in bnx2x:bnx2x_link_initialize
vxlan: Fix kernel panic on device delete.
net: mvneta: implement ->ndo_do_ioctl() to support PHY ioctls
net: mvneta: properly disable HW PHY polling and ensure adjust_link() works
icplus: Use netif_running to determine device state
ethernet/arc/arc_emac: Fix huge delays in large file copies
tuntap: orphan frags before trying to set tx timestamp
tuntap: purge socket error queue on detach
qlcnic: use standard NAPI weights
ipv6:introduce function to find route for redirect
bnx2x: VF RSS support - VF side
bnx2x: VF RSS support - PF side
vxlan: Notify drivers for listening UDP port changes
net: usbnet: update addr_assign_type if appropriate
driver/net: enic: update enic maintainers and driver
driver/net: enic: Exposing symbols for Cisco's low latency driver
...
CONFIG_DEBUG_KOBJECT_RELEASE which may be theoretical.
Cheers,
Rusty.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=15lp
-----END PGP SIGNATURE-----
Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull module updates from Rusty Russell:
"Minor fixes mainly, including a potential use-after-free on remove
found by CONFIG_DEBUG_KOBJECT_RELEASE which may be theoretical"
* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
module: Fix mod->mkobj.kobj potentially freed too early
kernel/params.c: use scnprintf() instead of sprintf()
kernel/module.c: use scnprintf() instead of sprintf()
module/lsm: Have apparmor module parameters work with no args
module: Add NOARG flag for ops with param_set_bool_enable_only() set function
module: Add flag to allow mod params to have no arguments
modules: add support for soft module dependencies
scripts/mod/modpost.c: permit '.cranges' secton for sh64 architecture.
module: fix sprintf format specifier in param_get_byte()
Pull cgroup updates from Tejun Heo:
"A lot of activities on the cgroup front. Most changes aren't visible
to userland at all at this point and are laying foundation for the
planned unified hierarchy.
- The biggest change is decoupling the lifetime management of css
(cgroup_subsys_state) from that of cgroup's. Because controllers
(cpu, memory, block and so on) will need to be dynamically enabled
and disabled, css which is the association point between a cgroup
and a controller may come and go dynamically across the lifetime of
a cgroup. Till now, css's were created when the associated cgroup
was created and stayed till the cgroup got destroyed.
Assumptions around this tight coupling permeated through cgroup
core and controllers. These assumptions are gradually removed,
which consists bulk of patches, and css destruction path is
completely decoupled from cgroup destruction path. Note that
decoupling of creation path is relatively easy on top of these
changes and the patchset is pending for the next window.
- cgroup has its own event mechanism cgroup.event_control, which is
only used by memcg. It is overly complex trying to achieve high
flexibility whose benefits seem dubious at best. Going forward,
new events will simply generate file modified event and the
existing mechanism is being made specific to memcg. This pull
request contains prepatory patches for such change.
- Various fixes and cleanups"
Fixed up conflict in kernel/cgroup.c as per Tejun.
* 'for-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (69 commits)
cgroup: fix cgroup_css() invocation in css_from_id()
cgroup: make cgroup_write_event_control() use css_from_dir() instead of __d_cgrp()
cgroup: make cgroup_event hold onto cgroup_subsys_state instead of cgroup
cgroup: implement CFTYPE_NO_PREFIX
cgroup: make cgroup_css() take cgroup_subsys * instead and allow NULL subsys
cgroup: rename cgroup_css_from_dir() to css_from_dir() and update its syntax
cgroup: fix cgroup_write_event_control()
cgroup: fix subsystem file accesses on the root cgroup
cgroup: change cgroup_from_id() to css_from_id()
cgroup: use css_get() in cgroup_create() to check CSS_ROOT
cpuset: remove an unncessary forward declaration
cgroup: RCU protect each cgroup_subsys_state release
cgroup: move subsys file removal to kill_css()
cgroup: factor out kill_css()
cgroup: decouple cgroup_subsys_state destruction from cgroup destruction
cgroup: replace cgroup->css_kill_cnt with ->nr_css
cgroup: bounce cgroup_subsys_state ref kill confirmation to a work item
cgroup: move cgroup->subsys[] assignment to online_css()
cgroup: reorganize css init / exit paths
cgroup: add __rcu modifier to cgroup->subsys[]
...
We allow task A to change B's nice level if it has a supserset of
B's privileges, or of it has CAP_SYS_NICE. Also allow it if A has
CAP_SYS_NICE with respect to B - meaning it is root in the same
namespace, or it created B's namespace.
Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
As the capabilites and capability bounding set are per user namespace
properties it is safe to allow changing them with just CAP_SETPCAP
permission in the user namespace.
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Tested-by: Richard Weinberger <richard@nod.at>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
This reverts commit 308ab70c46.
It breaks my FC6 test box. /dev/pts is not mounted. dmesg says
SELinux: mount invalid. Same superblock, different security settings
for (dev devpts, type devpts)
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Eric Paris <eparis@redhat.com>
Not considering sub filesystem has the following limitation. Support
for SELinux in FUSE is dependent on the particular userspace
filesystem, which is identified by the subtype. For e.g, GlusterFS,
a FUSE based filesystem supports SELinux (by mounting and processing
FUSE requests in different threads, avoiding the mount time
deadlock), whereas other FUSE based filesystems (identified by a
different subtype) have the mount time deadlock.
By considering the subtype of the filesytem in the SELinux policies,
allows us to specify a filesystem subtype, in the following way:
fs_use_xattr fuse.glusterfs gen_context(system_u:object_r:fs_t,s0);
This way not all FUSE filesystems are put in the same bucket and
subjected to the limitations of the other subtypes.
Signed-off-by: Anand Avati <avati@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
The apparmor module parameters for param_ops_aabool and
param_ops_aalockpolicy are both based off of the param_ops_bool,
and can handle a NULL value passed in as val. Have it enable the
new KERNEL_PARAM_FL_NOARGS flag to allow the parameters to be set
without having to state "=y" or "=1".
Cc: John Johansen <john.johansen@canonical.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Provide userspace the ability to introspect a sha1 hash value for each
profile currently loaded.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
Add the dynamic namespace relative profiles file to the interace, to allow
introspection of loaded profiles and their modes.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Kees Cook <kees@ubuntu.com>
Add the ability to take in and report a human readable profile attachment
string for profiles so that attachment specifications can be easily
inspected.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
Add basic interface files to access namespace and profile information.
The interface files are created when a profile is loaded and removed
when the profile or namespace is removed.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Allow emulating the default profile behavior from boot, by allowing
loading of a profile in the unconfined state into a new NS.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
namespaces now completely use the unconfined profile to track the
refcount and rcu freeing cycle. So rework the code to simplify (track
everything through the profile path right up to the end), and move the
rcu_head from policy base to profile as the namespace no longer needs
it.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
ns->unconfined is being used read side without locking, nor rcu but is
being updated when a namespace is removed. This works for the root ns
which is never removed but has a race window and can cause failures when
children namespaces are removed.
Also ns and ns->unconfined have a circular refcounting dependency that
is problematic and must be broken. Currently this is done incorrectly
when the namespace is destroyed.
Fix this by forward referencing unconfined via the replacedby infrastructure
instead of directly updating the ns->unconfined pointer.
Remove the circular refcount dependency by making the ns and its unconfined
profile share the same refcount.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
remove the use of replaced by chaining and move to profile invalidation
and lookup to handle task replacement.
Replacement chaining can result in large chains of profiles being pinned
in memory when one profile in the chain is use. With implicit labeling
this will be even more of a problem, so move to a direct lookup method.
Signed-off-by: John Johansen <john.johansen@canonical.com>
previously profiles had to be loaded one at a time, which could result
in cases where a replacement of a set would partially succeed, and then fail
resulting in inconsistent policy.
Allow multiple profiles to replaced "atomically" so that the replacement
either succeeds or fails for the entire set of profiles.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Add a policy directory to features to contain features that can affect
policy compilation but do not affect mediation. Eg of such features would
be types of dfa compression supported, etc.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Kees Cook <kees@ubuntu.com>
This is a follow-up to commit b5b3ee6c "apparmor: no need to delay vfree()".
Since vmalloc() will do "size = PAGE_ALIGN(size);",
we don't need to check for "size >= sizeof(struct work_struct)".
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Smack interface for loading rules has always parsed only single rule from
data written to it. This requires user program to call one write() per
each rule it wants to load.
This change makes it possible to write multiple rules, separated by new
line character. Smack will load at most PAGE_SIZE-1 characters and properly
return number of processed bytes. In case when user buffer is larger, it
will be additionally truncated. All characters after last \n will not get
parsed to avoid partial rule near input buffer boundary.
Signed-off-by: Rafal Krypa <r.krypa@samsung.com>
Previously, all css descendant iterators didn't include the origin
(root of subtree) css in the iteration. The reasons were maintaining
consistency with css_for_each_child() and that at the time of
introduction more use cases needed skipping the origin anyway;
however, given that css_is_descendant() considers self to be a
descendant, omitting the origin css has become more confusing and
looking at the accumulated use cases rather clearly indicates that
including origin would result in simpler code overall.
While this is a change which can easily lead to subtle bugs, cgroup
API including the iterators has recently gone through major
restructuring and no out-of-tree changes will be applicable without
adjustments making this a relatively acceptable opportunity for this
type of change.
The conversions are mostly straight-forward. If the iteration block
had explicit origin handling before or after, it's moved inside the
iteration. If not, if (pos == origin) continue; is added. Some
conversions add extra reference get/put around origin handling by
consolidating origin handling and the rest. While the extra ref
operations aren't strictly necessary, this shouldn't cause any
noticeable difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>
cgroup is currently in the process of transitioning to using css
(cgroup_subsys_state) as the primary handle instead of cgroup in
subsystem API. For hierarchy iterators, this is beneficial because
* In most cases, css is the only thing subsystems care about anyway.
* On the planned unified hierarchy, iterations for different
subsystems will need to skip over different subtrees of the
hierarchy depending on which subsystems are enabled on each cgroup.
Passing around css makes it unnecessary to explicitly specify the
subsystem in question as css is intersection between cgroup and
subsystem
* For the planned unified hierarchy, css's would need to be created
and destroyed dynamically independent from cgroup hierarchy. Having
cgroup core manage css iteration makes enforcing deref rules a lot
easier.
Most subsystem conversions are straight-forward. Noteworthy changes
are
* blkio: cgroup_to_blkcg() is no longer used. Removed.
* freezer: cgroup_freezer() is no longer used. Removed.
* devices: cgroup_to_devcgroup() is no longer used. Removed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Jens Axboe <axboe@kernel.dk>
cgroup is currently in the process of transitioning to using struct
cgroup_subsys_state * as the primary handle instead of struct cgroup.
Please see the previous commit which converts the subsystem methods
for rationale.
This patch converts all cftype file operations to take @css instead of
@cgroup. cftypes for the cgroup core files don't have their subsytem
pointer set. These will automatically use the dummy_css added by the
previous patch and can be converted the same way.
Most subsystem conversions are straight forwards but there are some
interesting ones.
* freezer: update_if_frozen() is also converted to take @css instead
of @cgroup for consistency. This will make the code look simpler
too once iterators are converted to use css.
* memory/vmpressure: mem_cgroup_from_css() needs to be exported to
vmpressure while mem_cgroup_from_cont() can be made static.
Updated accordingly.
* cpu: cgroup_tg() doesn't have any user left. Removed.
* cpuacct: cgroup_ca() doesn't have any user left. Removed.
* hugetlb: hugetlb_cgroup_form_cgroup() doesn't have any user left.
Removed.
* net_cls: cgrp_cls_state() doesn't have any user left. Removed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Steven Rostedt <rostedt@goodmis.org>
cgroup is currently in the process of transitioning to using struct
cgroup_subsys_state * as the primary handle instead of struct cgroup *
in subsystem implementations for the following reasons.
* With unified hierarchy, subsystems will be dynamically bound and
unbound from cgroups and thus css's (cgroup_subsys_state) may be
created and destroyed dynamically over the lifetime of a cgroup,
which is different from the current state where all css's are
allocated and destroyed together with the associated cgroup. This
in turn means that cgroup_css() should be synchronized and may
return NULL, making it more cumbersome to use.
* Differing levels of per-subsystem granularity in the unified
hierarchy means that the task and descendant iterators should behave
differently depending on the specific subsystem the iteration is
being performed for.
* In majority of the cases, subsystems only care about its part in the
cgroup hierarchy - ie. the hierarchy of css's. Subsystem methods
often obtain the matching css pointer from the cgroup and don't
bother with the cgroup pointer itself. Passing around css fits
much better.
This patch converts all cgroup_subsys methods to take @css instead of
@cgroup. The conversions are mostly straight-forward. A few
noteworthy changes are
* ->css_alloc() now takes css of the parent cgroup rather than the
pointer to the new cgroup as the css for the new cgroup doesn't
exist yet. Knowing the parent css is enough for all the existing
subsystems.
* In kernel/cgroup.c::offline_css(), unnecessary open coded css
dereference is replaced with local variable access.
This patch shouldn't cause any behavior differences.
v2: Unnecessary explicit cgrp->subsys[] deref in css_online() replaced
with local variable @css as suggested by Li Zefan.
Rebased on top of new for-3.12 which includes for-3.11-fixes so
that ->css_free() invocation added by da0a12caff ("cgroup: fix a
leak when percpu_ref_init() fails") is converted too. Suggested
by Li Zefan.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Steven Rostedt <rostedt@goodmis.org>
Currently, controllers have to explicitly follow the cgroup hierarchy
to find the parent of a given css. cgroup is moving towards using
cgroup_subsys_state as the main controller interface construct, so
let's provide a way to climb the hierarchy using just csses.
This patch implements css_parent() which, given a css, returns its
parent. The function is guarnateed to valid non-NULL parent css as
long as the target css is not at the top of the hierarchy.
freezer, cpuset, cpu, cpuacct, hugetlb, memory, net_cls and devices
are converted to use css_parent() instead of accessing cgroup->parent
directly.
* __parent_ca() is dropped from cpuacct and its usage is replaced with
parent_ca(). The only difference between the two was NULL test on
cgroup->parent which is now embedded in css_parent() making the
distinction moot. Note that eventually a css->parent field will be
added to css and the NULL check in css_parent() will go away.
This patch shouldn't cause any behavior differences.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
css (cgroup_subsys_state) is usually embedded in a subsys specific
data structure. Subsystems either use container_of() directly to cast
from css to such data structure or has an accessor function wrapping
such cast. As cgroup as whole is moving towards using css as the main
interface handle, add and update such accessors to ease dealing with
css's.
All accessors explicitly handle NULL input and return NULL in those
cases. While this looks like an extra branch in the code, as all
controllers specific data structures have css as the first field, the
casting doesn't involve any offsetting and the compiler can trivially
optimize out the branch.
* blkio, freezer, cpuset, cpu, cpuacct and net_cls didn't have such
accessor. Added.
* memory, hugetlb and devices already had one but didn't explicitly
handle NULL input. Updated.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
The names of the two struct cgroup_subsys_state accessors -
cgroup_subsys_state() and task_subsys_state() - are somewhat awkward.
The former clashes with the type name and the latter doesn't even
indicate it's somehow related to cgroup.
We're about to revamp large portion of cgroup API, so, let's rename
them so that they're less awkward. Most per-controller usages of the
accessors are localized in accessor wrappers and given the amount of
scheduled changes, this isn't gonna add any noticeable headache.
Rename cgroup_subsys_state() to cgroup_css() and task_subsys_state()
to task_css(). This patch is pure rename.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
The original implementation of the Smack IPv6 port based
local controls works most of the time using a sockaddr as
a temporary variable, but not always as it overflows in
some circumstances. The correct data is a sockaddr_in6.
A struct sockaddr isn't as large as a struct sockaddr_in6.
There would need to be casting one way or the other. This
patch gets it the right way.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
The Smack code that matches incoming CIPSO tags with Smack labels
reaches through the NetLabel interfaces and compares the network
data with the CIPSO header associated with a Smack label. This was
done in a ill advised attempt to optimize performance. It works
so long as the categories fit in a single capset, but this isn't
always the case.
This patch changes the Smack code to use the appropriate NetLabel
interfaces to compare the incoming CIPSO header with the CIPSO
header associated with a label. It will always match the CIPSO
headers correctly.
Targeted for git://git.gitorious.org/smack-next/kernel.git
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Accepted for the smack-next tree after changing the number of
slots from 128 to 16.
This patch adds a hash table to quicken searching of a smack label by its name.
Basically, the patch improves performance of SMACK initialization. Parsing of
rules involves translation from a string to a smack_known (aka label) entity
which is done in smk_find_entry().
The current implementation of the function iterates over a global list of
smack_known resulting in O(N) complexity for smk_find_entry(). The total
complexity of SMACK initialization becomes O(rules * labels). Therefore it
scales quadratically with a complexity of a system.
Applying the patch reduced the complexity of smk_find_entry() to O(1) as long
as number of label is in hundreds. If the number of labels is increased please
update SMACK_HASH_SLOTS constant defined in security/smack/smack.h. Introducing
the configuration of this constant with Kconfig or cmdline might be a good
idea.
The size of the hash table was adjusted experimentally. The rule set used by
TIZEN contains circa 17K rules for 500 labels. The table above contains
results of SMACK initialization using 'time smackctl apply' bash command.
The 'Ref' is a kernel without this patch applied. The consecutive values
refers to value of SMACK_HASH_SLOTS. Every measurement was repeated three
times to reduce noise.
| Ref | 1 | 2 | 4 | 8 | 16 | 32 | 64 | 128 | 256 | 512
--------------------------------------------------------------------------------------------
Run1 | 1.156 | 1.096 | 0.883 | 0.764 | 0.692 | 0.667 | 0.649 | 0.633 | 0.634 | 0.629 | 0.620
Run2 | 1.156 | 1.111 | 0.885 | 0.764 | 0.694 | 0.661 | 0.649 | 0.651 | 0.634 | 0.638 | 0.623
Run3 | 1.160 | 1.107 | 0.886 | 0.764 | 0.694 | 0.671 | 0.661 | 0.638 | 0.631 | 0.624 | 0.638
AVG | 1.157 | 1.105 | 0.885 | 0.764 | 0.693 | 0.666 | 0.653 | 0.641 | 0.633 | 0.630 | 0.627
Surprisingly, a single hlist is slightly faster than a double-linked list.
The speed-up saturates near 64 slots. Therefore I chose value 128 to provide
some margin if more labels were used.
It looks that IO becomes a new bottleneck.
Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com>
The smack_parsed_rule structure is allocated. If a rule is successfully
installed then the last reference to the object is lost. This patch fixes this
leak. Moreover smack_parsed_rule is allocated on stack because it no longer
needed ofter smk_write_rules_list() is finished.
Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com>
Current net name space has only one genid for both IPv4 and IPv6, it has below
drawbacks:
- Add/delete an IPv4 address will invalidate all IPv6 routing table entries.
- Insert/remove XFRM policy will also invalidate both IPv4/IPv6 routing table
entries even when the policy is only applied for one address family.
Thus, this patch attempt to split one genid for two to cater for IPv4 and IPv6
separately in a fine granularity.
Signed-off-by: Fan Du <fan.du@windriver.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the packet class in SELinux is not checked if there are no
SECMARK rules in the security or mangle netfilter tables. Some systems
prefer that packets are always checked, for example, to protect the system
should the netfilter rules fail to load or if the nefilter rules
were maliciously flushed.
Add the always_check_network policy capability which, when enabled, treats
SECMARK as enabled, even if there are no netfilter SECMARK rules and
treats peer labeling as enabled, even if there is no Netlabel or
labeled IPSEC configuration.
Includes definition of "redhat1" SELinux policy capability, which
exists in the SELinux userpace library, to keep ordering correct.
The SELinux userpace portion of this was merged last year, but this kernel
change fell on the floor.
Signed-off-by: Chris PeBenito <cpebenito@tresys.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
When the BUG() macro is disabled at compile time it can cause some
problems in the SELinux netnode code: invalid return codes and
uninitialized variables. This patch fixes this by making sure we take
some corrective action after the BUG() macro.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Use a helper to determine if a superblock should have the seclabel flag
rather than doing it in the function. I'm going to use this in the
security server as well.
Signed-off-by: Eric Paris <eparis@redhat.com>
Rather than passing pointers to memory locations, strings, and other
stuff just give up on the separation and give security_fs_use the
superblock. It just makes the code easier to read (even if not easier to
reuse on some other OS)
Signed-off-by: Eric Paris <eparis@redhat.com>
Instead of having special code around the 'non-mount' seclabel mount option
just handle it like the mount options.
Signed-off-by: Eric Paris <eparis@redhat.com>
We only have 6 options, so char is good enough, but use a short as that
packs nicely. This shrinks the superblock_security_struct just a little
bit.
Signed-off-by: Eric Paris <eparis@redhat.com>
Just to make it clear that we have mount time options and flags,
separate them. Since I decided to move the non-mount options above
above 0x10, we need a short instead of a char. (x86 padding says
this takes up no additional space as we have a 3byte whole in the
structure)
Signed-off-by: Eric Paris <eparis@redhat.com>
Currently we set the initialize and seclabel flag in one place. Do some
unrelated printk then we unset the seclabel flag. Eww. Instead do the flag
twiddling in one place in the code not seperated by unrelated printk. Also
don't set and unset the seclabel flag. Only set it if we need to.
Signed-off-by: Eric Paris <eparis@redhat.com>
We had this random hard coded value of '8' in the code (I put it there)
for the number of bits to check for mount options. This is stupid. Instead
use the #define we already have which tells us the number of mount
options.
Signed-off-by: Eric Paris <eparis@redhat.com>
We check if the fsname is proc and if so set the proc superblock security
struct flag. We then check if the flag is set and use the string 'proc'
for the fsname instead of just using the fsname. What's the point? It's
always proc... Get rid of the useless conditional.
Signed-off-by: Eric Paris <eparis@redhat.com>
The /sys/fs/selinux/policy file is not valid on big endian systems like
ppc64 or s390. Let's see why:
static int hashtab_cnt(void *key, void *data, void *ptr)
{
int *cnt = ptr;
*cnt = *cnt + 1;
return 0;
}
static int range_write(struct policydb *p, void *fp)
{
size_t nel;
[...]
/* count the number of entries in the hashtab */
nel = 0;
rc = hashtab_map(p->range_tr, hashtab_cnt, &nel);
if (rc)
return rc;
buf[0] = cpu_to_le32(nel);
rc = put_entry(buf, sizeof(u32), 1, fp);
So size_t is 64 bits. But then we pass a pointer to it as we do to
hashtab_cnt. hashtab_cnt thinks it is a 32 bit int and only deals with
the first 4 bytes. On x86_64 which is little endian, those first 4
bytes and the least significant, so this works out fine. On ppc64/s390
those first 4 bytes of memory are the high order bits. So at the end of
the call to hashtab_map nel has a HUGE number. But the least
significant 32 bits are all 0's.
We then pass that 64 bit number to cpu_to_le32() which happily truncates
it to a 32 bit number and does endian swapping. But the low 32 bits are
all 0's. So no matter how many entries are in the hashtab, big endian
systems always say there are 0 entries because I screwed up the
counting.
The fix is easy. Use a 32 bit int, as the hashtab_cnt expects, for nel.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
rootfs (ramfs) can support setting of security contexts
by userspace due to the vfs fallback behavior of calling
the security module to set the in-core inode state
for security.* attributes when the filesystem does not
provide an xattr handler. No xattr handler required
as the inodes are pinned in memory and have no backing
store.
This is useful in allowing early userspace to label individual
files within a rootfs while still providing a policy-defined
default via genfs.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Currently, the ebitmap_node structure has a fixed size of 32 bytes. On
a 32-bit system, the overhead is 8 bytes, leaving 24 bytes for being
used as bitmaps. The overhead ratio is 1/4.
On a 64-bit system, the overhead is 16 bytes. Therefore, only 16 bytes
are left for bitmap purpose and the overhead ratio is 1/2. With a
3.8.2 kernel, a boot-up operation will cause the ebitmap_get_bit()
function to be called about 9 million times. The average number of
ebitmap_node traversal is about 3.7.
This patch increases the size of the ebitmap_node structure to 64
bytes for 64-bit system to keep the overhead ratio at 1/4. This may
also improve performance a little bit by making node to node traversal
less frequent (< 2) as more bits are available in each node.
Signed-off-by: Waiman Long <Waiman.Long@hp.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
While running the high_systime workload of the AIM7 benchmark on
a 2-socket 12-core Westmere x86-64 machine running 3.10-rc4 kernel
(with HT on), it was found that a pretty sizable amount of time was
spent in the SELinux code. Below was the perf trace of the "perf
record -a -s" of a test run at 1500 users:
5.04% ls [kernel.kallsyms] [k] ebitmap_get_bit
1.96% ls [kernel.kallsyms] [k] mls_level_isvalid
1.95% ls [kernel.kallsyms] [k] find_next_bit
The ebitmap_get_bit() was the hottest function in the perf-report
output. Both the ebitmap_get_bit() and find_next_bit() functions
were, in fact, called by mls_level_isvalid(). As a result, the
mls_level_isvalid() call consumed 8.95% of the total CPU time of
all the 24 virtual CPUs which is quite a lot. The majority of the
mls_level_isvalid() function invocations come from the socket creation
system call.
Looking at the mls_level_isvalid() function, it is checking to see
if all the bits set in one of the ebitmap structure are also set in
another one as well as the highest set bit is no bigger than the one
specified by the given policydb data structure. It is doing it in
a bit-by-bit manner. So if the ebitmap structure has many bits set,
the iteration loop will be done many times.
The current code can be rewritten to use a similar algorithm as the
ebitmap_contains() function with an additional check for the
highest set bit. The ebitmap_contains() function was extended to
cover an optional additional check for the highest set bit, and the
mls_level_isvalid() function was modified to call ebitmap_contains().
With that change, the perf trace showed that the used CPU time drop
down to just 0.08% (ebitmap_contains + mls_level_isvalid) of the
total which is about 100X less than before.
0.07% ls [kernel.kallsyms] [k] ebitmap_contains
0.05% ls [kernel.kallsyms] [k] ebitmap_get_bit
0.01% ls [kernel.kallsyms] [k] mls_level_isvalid
0.01% ls [kernel.kallsyms] [k] find_next_bit
The remaining ebitmap_get_bit() and find_next_bit() functions calls
are made by other kernel routines as the new mls_level_isvalid()
function will not call them anymore.
This patch also improves the high_systime AIM7 benchmark result,
though the improvement is not as impressive as is suggested by the
reduction in CPU time spent in the ebitmap functions. The table below
shows the performance change on the 2-socket x86-64 system (with HT
on) mentioned above.
+--------------+---------------+----------------+-----------------+
| Workload | mean % change | mean % change | mean % change |
| | 10-100 users | 200-1000 users | 1100-2000 users |
+--------------+---------------+----------------+-----------------+
| high_systime | +0.1% | +0.9% | +2.6% |
+--------------+---------------+----------------+-----------------+
Signed-off-by: Waiman Long <Waiman.Long@hp.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Remove the BUG_ON() from selinux_skb_xfrm_sid() and propogate the
error code up to the caller. Also check the return values in the
only caller function, selinux_skb_peerlbl_sid().
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Remove the unused get_sock_isec() function and do some formatting
fixes.
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
The SELinux labeled IPsec code state management functions have been
long neglected and could use some cleanup and consolidation.
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
The xfrm_state_alloc_security() LSM hook implementation is really a
multiplexed hook with two different behaviors depending on the
arguments passed to it by the caller. This patch splits the LSM hook
implementation into two new hook implementations, which match the
LSM hooks in the rest of the kernel:
* xfrm_state_alloc
* xfrm_state_alloc_acquire
Also included in this patch are the necessary changes to the SELinux
code; no other LSMs are affected.
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Since everybody sets kstrdup()ed constant string to "struct xattr"->name but
nobody modifies "struct xattr"->name , we can omit kstrdup() and its failure
checking by constifying ->name member of "struct xattr".
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Joel Becker <jlbec@evilplan.org> [ocfs2]
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Reviewed-by: Paul Moore <paul@paul-moore.com>
Tested-by: Paul Moore <paul@paul-moore.com>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Pull nfsd changes from Bruce Fields:
"Changes this time include:
- 4.1 enabled on the server by default: the last 4.1-specific issues
I know of are fixed, so we're not going to find the rest of the
bugs without more exposure.
- Experimental support for NFSv4.2 MAC Labeling (to allow running
selinux over NFS), from Dave Quigley.
- Fixes for some delicate cache/upcall races that could cause rare
server hangs; thanks to Neil Brown and Bodo Stroesser for extreme
debugging persistence.
- Fixes for some bugs found at the recent NFS bakeathon, mostly v4
and v4.1-specific, but also a generic bug handling fragmented rpc
calls"
* 'for-3.11' of git://linux-nfs.org/~bfields/linux: (31 commits)
nfsd4: support minorversion 1 by default
nfsd4: allow destroy_session over destroyed session
svcrpc: fix failures to handle -1 uid's
sunrpc: Don't schedule an upcall on a replaced cache entry.
net/sunrpc: xpt_auth_cache should be ignored when expired.
sunrpc/cache: ensure items removed from cache do not have pending upcalls.
sunrpc/cache: use cache_fresh_unlocked consistently and correctly.
sunrpc/cache: remove races with queuing an upcall.
nfsd4: return delegation immediately if lease fails
nfsd4: do not throw away 4.1 lock state on last unlock
nfsd4: delegation-based open reclaims should bypass permissions
svcrpc: don't error out on small tcp fragment
svcrpc: fix handling of too-short rpc's
nfsd4: minor read_buf cleanup
nfsd4: fix decoding of compounds across page boundaries
nfsd4: clean up nfs4_open_delegation
NFSD: Don't give out read delegations on creates
nfsd4: allow client to send no cb_sec flavors
nfsd4: fail attempts to request gss on the backchannel
nfsd4: implement minimal SP4_MACH_CRED
...
Pull networking updates from David Miller:
"This is a re-do of the net-next pull request for the current merge
window. The only difference from the one I made the other day is that
this has Eliezer's interface renames and the timeout handling changes
made based upon your feedback, as well as a few bug fixes that have
trickeled in.
Highlights:
1) Low latency device polling, eliminating the cost of interrupt
handling and context switches. Allows direct polling of a network
device from socket operations, such as recvmsg() and poll().
Currently ixgbe, mlx4, and bnx2x support this feature.
Full high level description, performance numbers, and design in
commit 0a4db187a9 ("Merge branch 'll_poll'")
From Eliezer Tamir.
2) With the routing cache removed, ip_check_mc_rcu() gets exercised
more than ever before in the case where we have lots of multicast
addresses. Use a hash table instead of a simple linked list, from
Eric Dumazet.
3) Add driver for Atheros CQA98xx 802.11ac wireless devices, from
Bartosz Markowski, Janusz Dziedzic, Kalle Valo, Marek Kwaczynski,
Marek Puzyniak, Michal Kazior, and Sujith Manoharan.
4) Support reporting the TUN device persist flag to userspace, from
Pavel Emelyanov.
5) Allow controlling network device VF link state using netlink, from
Rony Efraim.
6) Support GRE tunneling in openvswitch, from Pravin B Shelar.
7) Adjust SOCK_MIN_RCVBUF and SOCK_MIN_SNDBUF for modern times, from
Daniel Borkmann and Eric Dumazet.
8) Allow controlling of TCP quickack behavior on a per-route basis,
from Cong Wang.
9) Several bug fixes and improvements to vxlan from Stephen
Hemminger, Pravin B Shelar, and Mike Rapoport. In particular,
support receiving on multiple UDP ports.
10) Major cleanups, particular in the area of debugging and cookie
lifetime handline, to the SCTP protocol code. From Daniel
Borkmann.
11) Allow packets to cross network namespaces when traversing tunnel
devices. From Nicolas Dichtel.
12) Allow monitoring netlink traffic via AF_PACKET sockets, in a
manner akin to how we monitor real network traffic via ptype_all.
From Daniel Borkmann.
13) Several bug fixes and improvements for the new alx device driver,
from Johannes Berg.
14) Fix scalability issues in the netem packet scheduler's time queue,
by using an rbtree. From Eric Dumazet.
15) Several bug fixes in TCP loss recovery handling, from Yuchung
Cheng.
16) Add support for GSO segmentation of MPLS packets, from Simon
Horman.
17) Make network notifiers have a real data type for the opaque
pointer that's passed into them. Use this to properly handle
network device flag changes in arp_netdev_event(). From Jiri
Pirko and Timo Teräs.
18) Convert several drivers over to module_pci_driver(), from Peter
Huewe.
19) tcp_fixup_rcvbuf() can loop 500 times over loopback, just use a
O(1) calculation instead. From Eric Dumazet.
20) Support setting of explicit tunnel peer addresses in ipv6, just
like ipv4. From Nicolas Dichtel.
21) Protect x86 BPF JIT against spraying attacks, from Eric Dumazet.
22) Prevent a single high rate flow from overruning an individual cpu
during RX packet processing via selective flow shedding. From
Willem de Bruijn.
23) Don't use spinlocks in TCP md5 signing fast paths, from Eric
Dumazet.
24) Don't just drop GSO packets which are above the TBF scheduler's
burst limit, chop them up so they are in-bounds instead. Also
from Eric Dumazet.
25) VLAN offloads are missed when configured on top of a bridge, fix
from Vlad Yasevich.
26) Support IPV6 in ping sockets. From Lorenzo Colitti.
27) Receive flow steering targets should be updated at poll() time
too, from David Majnemer.
28) Fix several corner case regressions in PMTU/redirect handling due
to the routing cache removal, from Timo Teräs.
29) We have to be mindful of ipv4 mapped ipv6 sockets in
upd_v6_push_pending_frames(). From Hannes Frederic Sowa.
30) Fix L2TP sequence number handling bugs, from James Chapman."
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1214 commits)
drivers/net: caif: fix wrong rtnl_is_locked() usage
drivers/net: enic: release rtnl_lock on error-path
vhost-net: fix use-after-free in vhost_net_flush
net: mv643xx_eth: do not use port number as platform device id
net: sctp: confirm route during forward progress
virtio_net: fix race in RX VQ processing
virtio: support unlocked queue poll
net/cadence/macb: fix bug/typo in extracting gem_irq_read_clear bit
Documentation: Fix references to defunct linux-net@vger.kernel.org
net/fs: change busy poll time accounting
net: rename low latency sockets functions to busy poll
bridge: fix some kernel warning in multicast timer
sfc: Fix memory leak when discarding scattered packets
sit: fix tunnel update via netlink
dt:net:stmmac: Add dt specific phy reset callback support.
dt:net:stmmac: Add support to dwmac version 3.610 and 3.710
dt:net:stmmac: Allocate platform data only if its NULL.
net:stmmac: fix memleak in the open method
ipv6: rt6_check_neigh should successfully verify neigh if no NUD information are available
net: ipv6: fix wrong ping_v6_sendmsg return value
...
Feature highlights include:
- Add basic client support for NFSv4.2
- Add basic client support for Labeled NFS (selinux for NFSv4.2)
- Fix the use of credentials in NFSv4.1 stateful operations, and
add support for NFSv4.1 state protection.
Bugfix highlights:
- Fix another NFSv4 open state recovery race
- Fix an NFSv4.1 back channel session regression
- Various rpc_pipefs races
- Fix another issue with NFSv3 auth negotiation
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)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=wGjn
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-3.11-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Feature highlights include:
- Add basic client support for NFSv4.2
- Add basic client support for Labeled NFS (selinux for NFSv4.2)
- Fix the use of credentials in NFSv4.1 stateful operations, and add
support for NFSv4.1 state protection.
Bugfix highlights:
- Fix another NFSv4 open state recovery race
- Fix an NFSv4.1 back channel session regression
- Various rpc_pipefs races
- Fix another issue with NFSv3 auth negotiation
Please note that Labeled NFS does require some additional support from
the security subsystem. The relevant changesets have all been
reviewed and acked by James Morris."
* tag 'nfs-for-3.11-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (54 commits)
NFS: Set NFS_CS_MIGRATION for NFSv4 mounts
NFSv4.1 Refactor nfs4_init_session and nfs4_init_channel_attrs
nfs: have NFSv3 try server-specified auth flavors in turn
nfs: have nfs_mount fake up a auth_flavs list when the server didn't provide it
nfs: move server_authlist into nfs_try_mount_request
nfs: refactor "need_mount" code out of nfs_try_mount
SUNRPC: PipeFS MOUNT notification optimization for dying clients
SUNRPC: split client creation routine into setup and registration
SUNRPC: fix races on PipeFS UMOUNT notifications
SUNRPC: fix races on PipeFS MOUNT notifications
NFSv4.1 use pnfs_device maxcount for the objectlayout gdia_maxcount
NFSv4.1 use pnfs_device maxcount for the blocklayout gdia_maxcount
NFSv4.1 Fix gdia_maxcount calculation to fit in ca_maxresponsesize
NFS: Improve legacy idmapping fallback
NFSv4.1 end back channel session draining
NFS: Apply v4.1 capabilities to v4.2
NFSv4.1: Clean up layout segment comparison helper names
NFSv4.1: layout segment comparison helpers should take 'const' parameters
NFSv4: Move the DNS resolver into the NFSv4 module
rpc_pipefs: only set rpc_dentry_ops if d_op isn't already set
...
Pull security subsystem updates from James Morris:
"In this update, Smack learns to love IPv6 and to mount a filesystem
with a transmutable hierarchy (i.e. security labels are inherited
from parent directory upon creation rather than creating process).
The rest of the changes are maintenance"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (37 commits)
tpm/tpm_i2c_infineon: Remove unused header file
tpm: tpm_i2c_infinion: Don't modify i2c_client->driver
evm: audit integrity metadata failures
integrity: move integrity_audit_msg()
evm: calculate HMAC after initializing posix acl on tmpfs
maintainers: add Dmitry Kasatkin
Smack: Fix the bug smackcipso can't set CIPSO correctly
Smack: Fix possible NULL pointer dereference at smk_netlbl_mls()
Smack: Add smkfstransmute mount option
Smack: Improve access check performance
Smack: Local IPv6 port based controls
tpm: fix regression caused by section type conflict of tpm_dev_release() in ppc builds
maintainers: Remove Kent from maintainers
tpm: move TPM_DIGEST_SIZE defintion
tpm_tis: missing platform_driver_unregister() on error in init_tis()
security: clarify cap_inode_getsecctx description
apparmor: no need to delay vfree()
apparmor: fix fully qualified name parsing
apparmor: fix setprocattr arg processing for onexec
apparmor: localize getting the security context to a few macros
...
Pull second set of VFS changes from Al Viro:
"Assorted f_pos race fixes, making do_splice_direct() safe to call with
i_mutex on parent, O_TMPFILE support, Jeff's locks.c series,
->d_hash/->d_compare calling conventions changes from Linus, misc
stuff all over the place."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
Document ->tmpfile()
ext4: ->tmpfile() support
vfs: export lseek_execute() to modules
lseek_execute() doesn't need an inode passed to it
block_dev: switch to fixed_size_llseek()
cpqphp_sysfs: switch to fixed_size_llseek()
tile-srom: switch to fixed_size_llseek()
proc_powerpc: switch to fixed_size_llseek()
ubi/cdev: switch to fixed_size_llseek()
pci/proc: switch to fixed_size_llseek()
isapnp: switch to fixed_size_llseek()
lpfc: switch to fixed_size_llseek()
locks: give the blocked_hash its own spinlock
locks: add a new "lm_owner_key" lock operation
locks: turn the blocked_list into a hashtable
locks: convert fl_link to a hlist_node
locks: avoid taking global lock if possible when waking up blocked waiters
locks: protect most of the file_lock handling with i_lock
locks: encapsulate the fl_link list handling
locks: make "added" in __posix_lock_file a bool
...
Pull cgroup changes from Tejun Heo:
"This pull request contains the following changes.
- cgroup_subsys_state (css) reference counting has been converted to
percpu-ref. css is what each resource controller embeds into its
own control structure and perform reference count against. It may
be used in hot paths of various subsystems and is similar to module
refcnt in that aspect. For example, block-cgroup's css refcnting
was showing up a lot in Mikulaus's device-mapper scalability work
and this should alleviate it.
- cgroup subtree iterator has been updated so that RCU read lock can
be released after grabbing reference. This allows simplifying its
users which requires blocking which used to build iteration list
under RCU read lock and then traverse it outside. This pull
request contains simplification of cgroup core and device-cgroup.
A separate pull request will update cpuset.
- Fixes for various bugs including corner race conditions and RCU
usage bugs.
- A lot of cleanups and some prepartory work for the planned unified
hierarchy support."
* 'for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (48 commits)
cgroup: CGRP_ROOT_SUBSYS_BOUND should also be ignored when mounting an existing hierarchy
cgroup: CGRP_ROOT_SUBSYS_BOUND should be ignored when comparing mount options
cgroup: fix deadlock on cgroup_mutex via drop_parsed_module_refcounts()
cgroup: always use RCU accessors for protected accesses
cgroup: fix RCU accesses around task->cgroups
cgroup: fix RCU accesses to task->cgroups
cgroup: grab cgroup_mutex in drop_parsed_module_refcounts()
cgroup: fix cgroupfs_root early destruction path
cgroup: reserve ID 0 for dummy_root and 1 for unified hierarchy
cgroup: implement for_each_[builtin_]subsys()
cgroup: move init_css_set initialization inside cgroup_mutex
cgroup: s/for_each_subsys()/for_each_root_subsys()/
cgroup: clean up find_css_set() and friends
cgroup: remove cgroup->actual_subsys_mask
cgroup: prefix global variables with "cgroup_"
cgroup: convert CFTYPE_* flags to enums
cgroup: rename cont to cgrp
cgroup: clean up cgroup_serial_nr_cursor
cgroup: convert cgroup_cft_commit() to use cgroup_for_each_descendant_pre()
cgroup: make serial_nr_cursor available throughout cgroup.c
...
Create a file_path_has_perm() function that is like path_has_perm() but
instead takes a file struct that is the source of both the path and the
inode (rather than getting the inode from the dentry in the path). This
is then used where appropriate.
This will be useful for situations like unionmount where it will be
possible to have an apparently-negative dentry (eg. a fallthrough) that is
open with the file struct pointing to an inode on the lower fs.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Replace a bunch of file->dentry->d_inode refs with file_inode().
In __fput(), use file->f_inode instead so as not to be affected by any tricks
that file_inode() might grow.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Before modifying an EVM protected extended attribute or any other
metadata included in the HMAC calculation, the existing 'security.evm'
is verified. This patch adds calls to integrity_audit_msg() to audit
integrity metadata failures.
Reported-by: Sven Vermeulen <sven.vermeulen@siphos.be>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
This patch moves the integrity_audit_msg() function and defintion to
security/integrity/, the parent directory, renames the 'ima_audit'
boot command line option to 'integrity_audit', and fixes the Kconfig
help text to reflect the actual code.
Changelog:
- Fixed ifdef inclusion of integrity_audit_msg() (Fengguang Wu)
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
The existing NFSv4 xattr handlers do not accept xattr calls to the security
namespace. This patch extends these handlers to accept xattrs from the security
namespace in addition to the default NFSv4 ACL namespace.
Acked-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Matthew N. Dodd <Matthew.Dodd@sparta.com>
Signed-off-by: Miguel Rodel Felipe <Rodel_FM@dsi.a-star.edu.sg>
Signed-off-by: Phua Eu Gene <PHUA_Eu_Gene@dsi.a-star.edu.sg>
Signed-off-by: Khin Mi Mi Aung <Mi_Mi_AUNG@dsi.a-star.edu.sg>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch implements the client transport and handling support for labeled
NFS. The patch adds two functions to encode and decode the security label
recommended attribute which makes use of the LSM hooks added earlier. It also
adds code to grab the label from the file attribute structures and encode the
label to be sent back to the server.
Acked-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Matthew N. Dodd <Matthew.Dodd@sparta.com>
Signed-off-by: Miguel Rodel Felipe <Rodel_FM@dsi.a-star.edu.sg>
Signed-off-by: Phua Eu Gene <PHUA_Eu_Gene@dsi.a-star.edu.sg>
Signed-off-by: Khin Mi Mi Aung <Mi_Mi_AUNG@dsi.a-star.edu.sg>
Signed-off-by: Steve Dickson <steved@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
There currently doesn't exist a labeling type that is adequate for use with
labeled NFS. Since NFS doesn't really support xattrs we can't use the use xattr
labeling behavior. For this we developed a new labeling type. The native
labeling type is used solely by NFS to ensure NFS inodes are labeled at runtime
by the NFS code instead of relying on the SELinux security server on the client
end.
Acked-by: Eric Paris <eparis@redhat.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Matthew N. Dodd <Matthew.Dodd@sparta.com>
Signed-off-by: Miguel Rodel Felipe <Rodel_FM@dsi.a-star.edu.sg>
Signed-off-by: Phua Eu Gene <PHUA_Eu_Gene@dsi.a-star.edu.sg>
Signed-off-by: Khin Mi Mi Aung <Mi_Mi_AUNG@dsi.a-star.edu.sg>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
There is no way to differentiate if a text mount option is passed from user
space or the kernel. A flags field is being added to the
security_sb_set_mnt_opts hook to allow for in kernel security flags to be sent
to the LSM for processing in addition to the text options received from mount.
This patch also updated existing code to fix compilation errors.
Acked-by: Eric Paris <eparis@redhat.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: David P. Quigley <dpquigl@tycho.nsa.gov>
Signed-off-by: Miguel Rodel Felipe <Rodel_FM@dsi.a-star.edu.sg>
Signed-off-by: Phua Eu Gene <PHUA_Eu_Gene@dsi.a-star.edu.sg>
Signed-off-by: Khin Mi Mi Aung <Mi_Mi_AUNG@dsi.a-star.edu.sg>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The interface to request security labels from user space is the xattr
interface. When requesting the security label from an NFS server it is
important to make sure the requested xattr actually is a MAC label. This allows
us to make sure that we get the desired semantics from the attribute instead of
something else such as capabilities or a time based LSM.
Acked-by: Eric Paris <eparis@redhat.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Matthew N. Dodd <Matthew.Dodd@sparta.com>
Signed-off-by: Miguel Rodel Felipe <Rodel_FM@dsi.a-star.edu.sg>
Signed-off-by: Phua Eu Gene <PHUA_Eu_Gene@dsi.a-star.edu.sg>
Signed-off-by: Khin Mi Mi Aung <Mi_Mi_AUNG@dsi.a-star.edu.sg>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
There is a time where we need to calculate a context without the
inode having been created yet. To do this we take the negative dentry and
calculate a context based on the process and the parent directory contexts.
Acked-by: Eric Paris <eparis@redhat.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Matthew N. Dodd <Matthew.Dodd@sparta.com>
Signed-off-by: Miguel Rodel Felipe <Rodel_FM@dsi.a-star.edu.sg>
Signed-off-by: Phua Eu Gene <PHUA_Eu_Gene@dsi.a-star.edu.sg>
Signed-off-by: Khin Mi Mi Aung <Mi_Mi_AUNG@dsi.a-star.edu.sg>
Signed-off-by: Steve Dickson <steved@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Merge 'net' bug fixes into 'net-next' as we have patches
that will build on top of them.
This merge commit includes a change from Emil Goode
(emilgoode@gmail.com) that fixes a warning that would
have been introduced by this merge. Specifically it
fixes the pingv6_ops method ipv6_chk_addr() to add a
"const" to the "struct net_device *dev" argument and
likewise update the dummy_ipv6_chk_addr() declaration.
Signed-off-by: David S. Miller <davem@davemloft.net>
Bug report: https://tizendev.org/bugs/browse/TDIS-3891
The reason is userspace libsmack only use "smackfs/cipso2" long-label interface,
but the code's logical is still for orginal fixed length label. Now update
smack_cipso_apply() to support flexible label (<=256 including tailing '\0')
There is also a bug in kernel/security/smack/smackfs.c:
When smk_set_cipso() parsing the CIPSO setting from userspace, the offset of
CIPSO level should be "strlen(label)+1" instead of "strlen(label)"
Signed-off-by: Passion,Zhao <passion.zhao@intel.com>
The SELinux labeled IPsec code was improperly handling its reference
counting, dropping a reference on a delete operation instead of on a
free/release operation.
Reported-by: Ondrej Moris <omoris@redhat.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
So far, only net_device * could be passed along with netdevice notifier
event. This patch provides a possibility to pass custom structure
able to provide info that event listener needs to know.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
v2->v3: fix typo on simeth
shortened dev_getter
shortened notifier_info struct name
v1->v2: fix notifier_call parameter in call_netdevice_notifier()
Signed-off-by: David S. Miller <davem@davemloft.net>
Suppliment the smkfsroot mount option with another, smkfstransmute,
that does the same thing but also marks the root inode as
transmutting. This allows a freshly created filesystem to
be mounted with a transmutting heirarchy.
Targeted for git://git.gitorious.org/smack-next/kernel.git
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Each Smack label that the kernel has seen is added to a
list of labels. The list of access rules for a given subject
label hangs off of the label list entry for the label.
This patch changes the structures that contain subject
labels to point at the label list entry rather that the
label itself. Doing so removes a label list lookup in
smk_access() that was accounting for the largest single
chunk of Smack overhead.
Targeted for git://git.gitorious.org/smack-next/kernel.git
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Smack does not provide access controls on IPv6 communications.
This patch introduces a mechanism for maintaining Smack lables
for local IPv6 communications. It is based on labeling local ports.
The behavior should be compatible with any future "real" IPv6
support as it provides no interfaces for users to manipulate
the labeling. Remote IPv6 connections use the ambient label
the same way that unlabeled IPv4 packets are treated.
Targeted for git://git.gitorious.org/smack-next/kernel.git
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
During a config change, propagate_exception() needs to traverse the
subtree to update config on the subtree. Because such config updates
need to allocate memory, it couldn't directly use
cgroup_for_each_descendant_pre() which required the whole iteration to
be contained in a single RCU read critical section. To work around
the limitation, propagate_exception() built a linked list of
descendant cgroups while read-locking RCU and then walked the list
afterwards, which is safe as the whole iteration is protected by
devcgroup_mutex. This works but is cumbersome.
With the recent updates, cgroup iterators now allow dropping RCU read
lock while iteration is in progress making this workaround no longer
necessary. This patch replaces dev_cgroup->propagate_pending list and
get_online_devcg() with direct cgroup_for_each_descendant_pre() walk.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Aristeu Rozanski <aris@redhat.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
We shouldn't be returning success from this function without also
filling in the return values ctx and ctxlen.
Note currently this doesn't appear to cause bugs since the only
inode_getsecctx caller I can find is fs/sysfs/inode.c, which only calls
this if security_inode_setsecurity succeeds. Assuming
security_inode_setsecurity is set to cap_inode_setsecurity whenever
inode_getsecctx is set to cap_inode_getsecctx, this function can never
actually called.
So I noticed this only because the server labeled NFS patches add a real
caller.
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
vfree() can be called from interrupt contexts now
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Pull VFS updates from Al Viro,
Misc cleanups all over the place, mainly wrt /proc interfaces (switch
create_proc_entry to proc_create(), get rid of the deprecated
create_proc_read_entry() in favor of using proc_create_data() and
seq_file etc).
7kloc removed.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits)
don't bother with deferred freeing of fdtables
proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h
proc: Make the PROC_I() and PDE() macros internal to procfs
proc: Supply a function to remove a proc entry by PDE
take cgroup_open() and cpuset_open() to fs/proc/base.c
ppc: Clean up scanlog
ppc: Clean up rtas_flash driver somewhat
hostap: proc: Use remove_proc_subtree()
drm: proc: Use remove_proc_subtree()
drm: proc: Use minor->index to label things, not PDE->name
drm: Constify drm_proc_list[]
zoran: Don't print proc_dir_entry data in debug
reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show()
proc: Supply an accessor for getting the data from a PDE's parent
airo: Use remove_proc_subtree()
rtl8192u: Don't need to save device proc dir PDE
rtl8187se: Use a dir under /proc/net/r8180/
proc: Add proc_mkdir_data()
proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h}
proc: Move PDE_NET() to fs/proc/proc_net.c
...
Pull networking updates from David Miller:
"Highlights (1721 non-merge commits, this has to be a record of some
sort):
1) Add 'random' mode to team driver, from Jiri Pirko and Eric
Dumazet.
2) Make it so that any driver that supports configuration of multiple
MAC addresses can provide the forwarding database add and del
calls by providing a default implementation and hooking that up if
the driver doesn't have an explicit set of handlers. From Vlad
Yasevich.
3) Support GSO segmentation over tunnels and other encapsulating
devices such as VXLAN, from Pravin B Shelar.
4) Support L2 GRE tunnels in the flow dissector, from Michael Dalton.
5) Implement Tail Loss Probe (TLP) detection in TCP, from Nandita
Dukkipati.
6) In the PHY layer, allow supporting wake-on-lan in situations where
the PHY registers have to be written for it to be configured.
Use it to support wake-on-lan in mv643xx_eth.
From Michael Stapelberg.
7) Significantly improve firewire IPV6 support, from YOSHIFUJI
Hideaki.
8) Allow multiple packets to be sent in a single transmission using
network coding in batman-adv, from Martin Hundebøll.
9) Add support for T5 cxgb4 chips, from Santosh Rastapur.
10) Generalize the VXLAN forwarding tables so that there is more
flexibility in configurating various aspects of the endpoints.
From David Stevens.
11) Support RSS and TSO in hardware over GRE tunnels in bxn2x driver,
from Dmitry Kravkov.
12) Zero copy support in nfnelink_queue, from Eric Dumazet and Pablo
Neira Ayuso.
13) Start adding networking selftests.
14) In situations of overload on the same AF_PACKET fanout socket, or
per-cpu packet receive queue, minimize drop by distributing the
load to other cpus/fanouts. From Willem de Bruijn and Eric
Dumazet.
15) Add support for new payload offset BPF instruction, from Daniel
Borkmann.
16) Convert several drivers over to mdoule_platform_driver(), from
Sachin Kamat.
17) Provide a minimal BPF JIT image disassembler userspace tool, from
Daniel Borkmann.
18) Rewrite F-RTO implementation in TCP to match the final
specification of it in RFC4138 and RFC5682. From Yuchung Cheng.
19) Provide netlink socket diag of netlink sockets ("Yo dawg, I hear
you like netlink, so I implemented netlink dumping of netlink
sockets.") From Andrey Vagin.
20) Remove ugly passing of rtnetlink attributes into rtnl_doit
functions, from Thomas Graf.
21) Allow userspace to be able to see if a configuration change occurs
in the middle of an address or device list dump, from Nicolas
Dichtel.
22) Support RFC3168 ECN protection for ipv6 fragments, from Hannes
Frederic Sowa.
23) Increase accuracy of packet length used by packet scheduler, from
Jason Wang.
24) Beginning set of changes to make ipv4/ipv6 fragment handling more
scalable and less susceptible to overload and locking contention,
from Jesper Dangaard Brouer.
25) Get rid of using non-type-safe NLMSG_* macros and use nlmsg_*()
instead. From Hong Zhiguo.
26) Optimize route usage in IPVS by avoiding reference counting where
possible, from Julian Anastasov.
27) Convert IPVS schedulers to RCU, also from Julian Anastasov.
28) Support cpu fanouts in xt_NFQUEUE netfilter target, from Holger
Eitzenberger.
29) Network namespace support for nf_log, ebt_log, xt_LOG, ipt_ULOG,
nfnetlink_log, and nfnetlink_queue. From Gao feng.
30) Implement RFC3168 ECN protection, from Hannes Frederic Sowa.
31) Support several new r8169 chips, from Hayes Wang.
32) Support tokenized interface identifiers in ipv6, from Daniel
Borkmann.
33) Use usbnet_link_change() helper in USB net driver, from Ming Lei.
34) Add 802.1ad vlan offload support, from Patrick McHardy.
35) Support mmap() based netlink communication, also from Patrick
McHardy.
36) Support HW timestamping in mlx4 driver, from Amir Vadai.
37) Rationalize AF_PACKET packet timestamping when transmitting, from
Willem de Bruijn and Daniel Borkmann.
38) Bring parity to what's provided by /proc/net/packet socket dumping
and the info provided by netlink socket dumping of AF_PACKET
sockets. From Nicolas Dichtel.
39) Fix peeking beyond zero sized SKBs in AF_UNIX, from Benjamin
Poirier"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits)
filter: fix va_list build error
af_unix: fix a fatal race with bit fields
bnx2x: Prevent memory leak when cnic is absent
bnx2x: correct reading of speed capabilities
net: sctp: attribute printl with __printf for gcc fmt checks
netlink: kconfig: move mmap i/o into netlink kconfig
netpoll: convert mutex into a semaphore
netlink: Fix skb ref counting.
net_sched: act_ipt forward compat with xtables
mlx4_en: fix a build error on 32bit arches
Revert "bnx2x: allow nvram test to run when device is down"
bridge: avoid OOPS if root port not found
drivers: net: cpsw: fix kernel warn on cpsw irq enable
sh_eth: use random MAC address if no valid one supplied
3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA)
tg3: fix to append hardware time stamping flags
unix/stream: fix peeking with an offset larger than data in queue
unix/dgram: fix peeking with an offset larger than data in queue
unix/dgram: peek beyond 0-sized skbs
openvswitch: Remove unneeded ovs_netdev_get_ifindex()
...
Merge third batch of fixes from Andrew Morton:
"Most of the rest. I still have two large patchsets against AIO and
IPC, but they're a bit stuck behind other trees and I'm about to
vanish for six days.
- random fixlets
- inotify
- more of the MM queue
- show_stack() cleanups
- DMI update
- kthread/workqueue things
- compat cleanups
- epoll udpates
- binfmt updates
- nilfs2
- hfs
- hfsplus
- ptrace
- kmod
- coredump
- kexec
- rbtree
- pids
- pidns
- pps
- semaphore tweaks
- some w1 patches
- relay updates
- core Kconfig changes
- sysrq tweaks"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (109 commits)
Documentation/sysrq: fix inconstistent help message of sysrq key
ethernet/emac/sysrq: fix inconstistent help message of sysrq key
sparc/sysrq: fix inconstistent help message of sysrq key
powerpc/xmon/sysrq: fix inconstistent help message of sysrq key
ARM/etm/sysrq: fix inconstistent help message of sysrq key
power/sysrq: fix inconstistent help message of sysrq key
kgdb/sysrq: fix inconstistent help message of sysrq key
lib/decompress.c: fix initconst
notifier-error-inject: fix module names in Kconfig
kernel/sys.c: make prctl(PR_SET_MM) generally available
UAPI: remove empty Kbuild files
menuconfig: print more info for symbol without prompts
init/Kconfig: re-order CONFIG_EXPERT options to fix menuconfig display
kconfig menu: move Virtualization drivers near other virtualization options
Kconfig: consolidate CONFIG_DEBUG_STRICT_USER_COPY_CHECKS
relay: use macro PAGE_ALIGN instead of FIX_SIZE
kernel/relay.c: move FIX_SIZE macro into relay.c
kernel/relay.c: remove unused function argument actor
drivers/w1/slaves/w1_ds2760.c: fix the error handling in w1_ds2760_add_slave()
drivers/w1/slaves/w1_ds2781.c: fix the error handling in w1_ds2781_add_slave()
...
Use call_usermodehelper_setup() + call_usermodehelper_exec() instead of
calling call_usermodehelper_fns(). In case there's an OOM in this last
function the cleanup function may not be called - in this case we would
miss a call to key_put().
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Cc: Oleg Nesterov <oleg@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Tejun Heo <tj@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull security subsystem update from James Morris:
"Just some minor updates across the subsystem"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
ima: eliminate passing d_name.name to process_measurement()
TPM: Retry SaveState command in suspend path
tpm/tpm_i2c_infineon: Add small comment about return value of __i2c_transfer
tpm/tpm_i2c_infineon.c: Add OF attributes type and name to the of_device_id table entries
tpm_i2c_stm_st33: Remove duplicate inclusion of header files
tpm: Add support for new Infineon I2C TPM (SLB 9645 TT 1.2 I2C)
char/tpm: Convert struct i2c_msg initialization to C99 format
drivers/char/tpm/tpm_ppi: use strlcpy instead of strncpy
tpm/tpm_i2c_stm_st33: formatting and white space changes
Smack: include magic.h in smackfs.c
selinux: make security_sb_clone_mnt_opts return an error on context mismatch
seccomp: allow BPF_XOR based ALU instructions.
Fix NULL pointer dereference in smack_inode_unlink() and smack_inode_rmdir()
Smack: add support for modification of existing rules
smack: SMACK_MAGIC to include/uapi/linux/magic.h
Smack: add missing support for transmute bit in smack_str_from_perm()
Smack: prevent revoke-subject from failing when unseen label is written to it
tomoyo: use DEFINE_SRCU() to define tomoyo_ss
tomoyo: use DEFINE_SRCU() to define tomoyo_ss
Pull cgroup updates from Tejun Heo:
- Fixes and a lot of cleanups. Locking cleanup is finally complete.
cgroup_mutex is no longer exposed to individual controlelrs which
used to cause nasty deadlock issues. Li fixed and cleaned up quite a
bit including long standing ones like racy cgroup_path().
- device cgroup now supports proper hierarchy thanks to Aristeu.
- perf_event cgroup now supports proper hierarchy.
- A new mount option "__DEVEL__sane_behavior" is added. As indicated
by the name, this option is to be used for development only at this
point and generates a warning message when used. Unfortunately,
cgroup interface currently has too many brekages and inconsistencies
to implement a consistent and unified hierarchy on top. The new flag
is used to collect the behavior changes which are necessary to
implement consistent unified hierarchy. It's likely that this flag
won't be used verbatim when it becomes ready but will be enabled
implicitly along with unified hierarchy.
The option currently disables some of broken behaviors in cgroup core
and also .use_hierarchy switch in memcg (will be routed through -mm),
which can be used to make very unusual hierarchy where nesting is
partially honored. It will also be used to implement hierarchy
support for blk-throttle which would be impossible otherwise without
introducing a full separate set of control knobs.
This is essentially versioning of interface which isn't very nice but
at this point I can't see any other options which would allow keeping
the interface the same while moving towards hierarchy behavior which
is at least somewhat sane. The planned unified hierarchy is likely
to require some level of adaptation from userland anyway, so I think
it'd be best to take the chance and update the interface such that
it's supportable in the long term.
Maintaining the existing interface does complicate cgroup core but
shouldn't put too much strain on individual controllers and I think
it'd be manageable for the foreseeable future. Maybe we'll be able
to drop it in a decade.
Fix up conflicts (including a semantic one adding a new #include to ppc
that was uncovered by header the file changes) as per Tejun.
* 'for-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (45 commits)
cpuset: fix compile warning when CONFIG_SMP=n
cpuset: fix cpu hotplug vs rebuild_sched_domains() race
cpuset: use rebuild_sched_domains() in cpuset_hotplug_workfn()
cgroup: restore the call to eventfd->poll()
cgroup: fix use-after-free when umounting cgroupfs
cgroup: fix broken file xattrs
devcg: remove parent_cgroup.
memcg: force use_hierarchy if sane_behavior
cgroup: remove cgrp->top_cgroup
cgroup: introduce sane_behavior mount option
move cgroupfs_root to include/linux/cgroup.h
cgroup: convert cgroupfs_root flag bits to masks and add CGRP_ prefix
cgroup: make cgroup_path() not print double slashes
Revert "cgroup: remove bind() method from cgroup_subsys."
perf: make perf_event cgroup hierarchical
cgroup: implement cgroup_is_descendant()
cgroup: make sure parent won't be destroyed before its children
cgroup: remove bind() method from cgroup_subsys.
devcg: remove broken_hierarchy tag
cgroup: remove cgroup_lock_is_held()
...
currently apparmor name parsing is only correctly handling
:<NS>:<profile>
but
:<NS>://<profile>
is also a valid form and what is exported to userspace.
Signed-off-by: John Johansen <john.johansen@canonical.com>
the exec file isn't processing its command arg. It should only set be
responding to a command of exec.
Also cleanup setprocattr some more while we are at it.
Signed-off-by: John Johansen <john.johansen@canonical.com>
smatch reports
error: potential NULL dereference 'ns'.
this can not actually occur because it relies on aa_split_fqname setting
both ns_name and name as null but ns_name will actually always have a
value in this case.
so remove the unnecessary if (ns_name) conditional that is resulting
in the false positive further down.
Signed-off-by: John Johansen <john.johansen@canonical.com>
The audit type table is missing a comma so that KILLED comes out as
KILLEDAUTO.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Steve Beattie <sbeattie@ubuntu.com>
The top 8 bits of the base field have never been used, in fact can't
be used, by the current 'dfa16' format. However they will be used in the
future as flags, so mask them off when using base as an index value.
Note: the use of the top 8 bits, without masking is trapped by the verify
checks that base entries are within the size bounds.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Kees Cook <kees@ubuntu.com>
Move the free_profile fn ahead of aa_alloc_profile so it can be used
in aa_alloc_profile without a forward declaration.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Kees Cook <kees@ubuntu.com>
The sid is not going to be a direct property of a profile anymore, instead
it will be directly related to the label, and the profile will pickup
a label back reference.
For null-profiles replace the use of sid with a per namespace unique
id.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Kees Cook <kees@ubuntu.com>
Instead of limiting the setting of the processes limits to current,
relax this to tasks confined by the same profile, as the apparmor
controls for rlimits are at a profile level granularity.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Steve Beattie <sbeattie@ubuntu.com>
The "permipc" command is unused and unfinished, remove it.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Kees Cook <kees@ubuntu.com>
-ESTALE used to be incorrectly used to indicate a disconnected path, when
name lookup failed. This was fixed in commit e1b0e444 to correctly return
-EACCESS, but the error to failure message mapping was not correctly updated
to reflect this change.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Steve Beattie <sbeattie@ubuntu.com>
When policy specifies a transition to a profile that is not currently
loaded, it result in exec being denied. However the failure is not being
audited correctly because the audit code is treating this as an allowed
permission and thus not reporting it.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-By: Steve Beattie <sbeattie@ubuntu.com>
Conflicts:
drivers/net/ethernet/emulex/benet/be_main.c
drivers/net/ethernet/intel/igb/igb_main.c
drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
include/net/scm.h
net/batman-adv/routing.c
net/ipv4/tcp_input.c
The e{uid,gid} --> {uid,gid} credentials fix conflicted with the
cleanup in net-next to now pass cred structs around.
The be2net driver had a bug fix in 'net' that overlapped with the VLAN
interface changes by Patrick McHardy in net-next.
An IGB conflict existed because in 'net' the build_skb() support was
reverted, and in 'net-next' there was a comment style fix within that
code.
Several batman-adv conflicts were resolved by making sure that all
calls to batadv_is_my_mac() are changed to have a new bat_priv first
argument.
Eric Dumazet's TS ECR fix in TCP in 'net' conflicted with the F-RTO
rewrite in 'net-next', mostly overlapping changes.
Thanks to Stephen Rothwell and Antonio Quartulli for help with several
of these merge resolutions.
Signed-off-by: David S. Miller <davem@davemloft.net>
In devcgroup_css_alloc(), there is no longer need for parent_cgroup.
bd2953ebbb("devcg: propagate local changes down the hierarchy") made
the variable parent_cgroup redundant. This patch removes parent_cgroup
from devcgroup_css_alloc().
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Passing a pointer to the dentry name, as a parameter to
process_measurement(), causes a race condition with rename() and
is unnecessary, as the dentry name is already accessible via the
file parameter.
In the normal case, we use the full pathname as provided by
brpm->filename, bprm->interp, or ima_d_path(). Only on ima_d_path()
failure, do we fallback to using the d_name.name, which points
either to external memory or d_iname.
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Commit 90ba9b1986 (tcp: tcp_make_synack() can use alloc_skb())
broke certain SELinux/NetLabel configurations by no longer correctly
assigning the sock to the outgoing SYNACK packet.
Cost of atomic operations on the LISTEN socket is quite big,
and we would like it to happen only if really needed.
This patch introduces a new security_ops->skb_owned_by() method,
that is a void operation unless selinux is active.
Reported-by: Miroslav Vadkerti <mvadkert@redhat.com>
Diagnosed-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-security-module@vger.kernel.org
Acked-by: James Morris <james.l.morris@oracle.com>
Tested-by: Paul Moore <pmoore@redhat.com>
Acked-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As reported for linux-next: Tree for Apr 2 (smack)
Add the required include for smackfs.c
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: James Morris <james.l.morris@oracle.com>
I had the following problem reported a while back. If you mount the
same filesystem twice using NFSv4 with different contexts, then the
second context= option is ignored. For instance:
# mount server:/export /mnt/test1
# mount server:/export /mnt/test2 -o context=system_u:object_r:tmp_t:s0
# ls -dZ /mnt/test1
drwxrwxrwt. root root system_u:object_r:nfs_t:s0 /mnt/test1
# ls -dZ /mnt/test2
drwxrwxrwt. root root system_u:object_r:nfs_t:s0 /mnt/test2
When we call into SELinux to set the context of a "cloned" superblock,
it will currently just bail out when it notices that we're reusing an
existing superblock. Since the existing superblock is already set up and
presumably in use, we can't go overwriting its context with the one from
the "original" sb. Because of this, the second context= option in this
case cannot take effect.
This patch fixes this by turning security_sb_clone_mnt_opts into an int
return operation. When it finds that the "new" superblock that it has
been handed is already set up, it checks to see whether the contexts on
the old superblock match it. If it does, then it will just return
success, otherwise it'll return -EBUSY and emit a printk to tell the
admin why the second mount failed.
Note that this patch may cause casualties. The NFSv4 code relies on
being able to walk down to an export from the pseudoroot. If you mount
filesystems that are nested within one another with different contexts,
then this patch will make those mounts fail in new and "exciting" ways.
For instance, suppose that /export is a separate filesystem on the
server:
# mount server:/ /mnt/test1
# mount salusa:/export /mnt/test2 -o context=system_u:object_r:tmp_t:s0
mount.nfs: an incorrect mount option was specified
...with the printk in the ring buffer. Because we *might* eventually
walk down to /mnt/test1/export, the mount is denied due to this patch.
The second mount needs the pseudoroot superblock, but that's already
present with the wrong context.
OTOH, if we mount these in the reverse order, then both mounts work,
because the pseudoroot superblock created when mounting /export is
discarded once that mount is done. If we then however try to walk into
that directory, the automount fails for the similar reasons:
# cd /mnt/test1/scratch/
-bash: cd: /mnt/test1/scratch: Device or resource busy
The story I've gotten from the SELinux folks that I've talked to is that
this is desirable behavior. In SELinux-land, mounting the same data
under different contexts is wrong -- there can be only one.
Cc: Steve Dickson <steved@redhat.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Conflicts:
net/mac80211/sta_info.c
net/wireless/core.h
Two minor conflicts in wireless. Overlapping additions of extern
declarations in net/wireless/core.h and a bug fix overlapping with
the addition of a boolean parameter to __ieee80211_key_free().
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull userns fixes from Eric W Biederman:
"The bulk of the changes are fixing the worst consequences of the user
namespace design oversight in not considering what happens when one
namespace starts off as a clone of another namespace, as happens with
the mount namespace.
The rest of the changes are just plain bug fixes.
Many thanks to Andy Lutomirski for pointing out many of these issues."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
userns: Restrict when proc and sysfs can be mounted
ipc: Restrict mounting the mqueue filesystem
vfs: Carefully propogate mounts across user namespaces
vfs: Add a mount flag to lock read only bind mounts
userns: Don't allow creation if the user is chrooted
yama: Better permission check for ptraceme
pid: Handle the exit of a multi-threaded init.
scm: Require CAP_SYS_ADMIN over the current pidns to spoof pids.
Change the permission check for yama_ptrace_ptracee to the standard
ptrace permission check, testing if the traceer has CAP_SYS_PTRACE
in the tracees user namespace.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
This patch makes exception changes to propagate down in hierarchy respecting
when possible local exceptions.
New exceptions allowing additional access to devices won't be propagated, but
it'll be possible to add an exception to access all of part of the newly
allowed device(s).
New exceptions disallowing access to devices will be propagated down and the
local group's exceptions will be revalidated for the new situation.
Example:
A
/ \
B
group behavior exceptions
A allow "b 8:* rwm", "c 116:1 rw"
B deny "c 1:3 rwm", "c 116:2 rwm", "b 3:* rwm"
If a new exception is added to group A:
# echo "c 116:* r" > A/devices.deny
it'll propagate down and after revalidating B's local exceptions, the exception
"c 116:2 rwm" will be removed.
In case parent's exceptions change and local exceptions are not allowed anymore,
they'll be deleted.
v7:
- do not allow behavior change when the cgroup has children
- update documentation
v6: fixed issues pointed by Serge Hallyn
- only copy parent's exceptions while propagating behavior if the local
behavior is different
- while propagating exceptions, do not clear and copy parent's: it'd be against
the premise we don't propagate access to more devices
v5: fixed issues pointed by Serge Hallyn
- updated documentation
- not propagating when an exception is written to devices.allow
- when propagating a new behavior, clean the local exceptions list if they're
for a different behavior
v4: fixed issues pointed by Tejun Heo
- separated function to walk the tree and collect valid propagation targets
v3: fixed issues pointed by Tejun Heo
- update documentation
- move css_online/css_offline changes to a new patch
- use cgroup_for_each_descendant_pre() instead of own descendant walk
- move exception_copy rework to a separared patch
- move exception_clean rework to a separated patch
v2: fixed issues pointed by Tejun Heo
- instead of keeping the local settings that won't apply anymore, remove them
Cc: Tejun Heo <tj@kernel.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Allocate resources and change behavior only when online. This is needed in
order to determine if a node is suitable for hierarchy propagation or if it's
being removed.
Locking:
Both functions take devcgroup_mutex to make changes to device_cgroup structure.
Hierarchy propagation will also take devcgroup_mutex before walking the
tree while walking the tree itself is protected by rcu lock.
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently may_access() is only able to verify if an exception is valid for the
current cgroup, which has the same behavior. With hierarchy, it'll be also used
to verify if a cgroup local exception is valid towards its cgroup parent, which
might have different behavior.
v2:
- updated patch description
- rebased on top of a new patch to expand the may_access() logic to make it
more clear
- fixed argument description order in may_access()
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This patch fixes kernel Oops because of wrong common_audit_data type
in smack_inode_unlink() and smack_inode_rmdir().
When SMACK security module is enabled and SMACK logging is on (/smack/logging
is not zero) and you try to delete the file which
1) you cannot delete due to SMACK rules and logging of failures is on
or
2) you can delete and logging of success is on,
you will see following:
Unable to handle kernel NULL pointer dereference at virtual address 000002d7
[<...>] (strlen+0x0/0x28)
[<...>] (audit_log_untrustedstring+0x14/0x28)
[<...>] (common_lsm_audit+0x108/0x6ac)
[<...>] (smack_log+0xc4/0xe4)
[<...>] (smk_curacc+0x80/0x10c)
[<...>] (smack_inode_unlink+0x74/0x80)
[<...>] (security_inode_unlink+0x2c/0x30)
[<...>] (vfs_unlink+0x7c/0x100)
[<...>] (do_unlinkat+0x144/0x16c)
The function smack_inode_unlink() (and smack_inode_rmdir()) need
to log two structures of different types. First of all it does:
smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_DENTRY);
smk_ad_setfield_u_fs_path_dentry(&ad, dentry);
This will set common audit data type to LSM_AUDIT_DATA_DENTRY
and store dentry for auditing (by function smk_curacc(), which in turn calls
dump_common_audit_data(), which is actually uses provided data and logs it).
/*
* You need write access to the thing you're unlinking
*/
rc = smk_curacc(smk_of_inode(ip), MAY_WRITE, &ad);
if (rc == 0) {
/*
* You also need write access to the containing directory
*/
Then this function wants to log anoter data:
smk_ad_setfield_u_fs_path_dentry(&ad, NULL);
smk_ad_setfield_u_fs_inode(&ad, dir);
The function sets inode field, but don't change common_audit_data type.
rc = smk_curacc(smk_of_inode(dir), MAY_WRITE, &ad);
}
So the dump_common_audit() function incorrectly interprets inode structure
as dentry, and Oops will happen.
This patch reinitializes common_audit_data structures with correct type.
Also I removed unneeded
smk_ad_setfield_u_fs_path_dentry(&ad, NULL);
initialization, because both dentry and inode pointers are stored
in the same union.
Signed-off-by: Igor Zhbanov <i.zhbanov@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Rule modifications are enabled via /smack/change-rule. Format is as follows:
"Subject Object rwaxt rwaxt"
First two strings are subject and object labels up to 255 characters.
Third string contains permissions to enable.
Fourth string contains permissions to disable.
All unmentioned permissions will be left unchanged.
If no rule previously existed, it will be created.
Targeted for git://git.gitorious.org/smack-next/kernel.git
Signed-off-by: Rafal Krypa <r.krypa@samsung.com>
This fixes audit logs for granting or denial of permissions to show
information about transmute bit.
Targeted for git://git.gitorious.org/smack-next/kernel.git
Signed-off-by: Rafal Krypa <r.krypa@samsung.com>
Special file /smack/revoke-subject will silently accept labels that are not
present on the subject label list. Nothing has to be done for such labels,
as there are no rules for them to revoke.
Targeted for git://git.gitorious.org/smack-next/kernel.git
Signed-off-by: Rafal Krypa <r.krypa@samsung.com>
The call tree here is:
sk_clone_lock() <- takes bh_lock_sock(newsk);
xfrm_sk_clone_policy()
__xfrm_sk_clone_policy()
clone_policy() <- uses GFP_ATOMIC for allocations
security_xfrm_policy_clone()
security_ops->xfrm_policy_clone_security()
selinux_xfrm_policy_clone()
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@kernel.org
Signed-off-by: James Morris <james.l.morris@oracle.com>
DEFINE_STATIC_SRCU() defines srcu struct and do init at build time.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Looking at mm/process_vm_access.c:process_vm_rw() and comparing it to
compat_process_vm_rw() shows that the compatibility code requires an
explicit "access_ok()" check before calling
compat_rw_copy_check_uvector(). The same difference seems to appear when
we compare fs/read_write.c:do_readv_writev() to
fs/compat.c:compat_do_readv_writev().
This subtle difference between the compat and non-compat requirements
should probably be debated, as it seems to be error-prone. In fact,
there are two others sites that use this function in the Linux kernel,
and they both seem to get it wrong:
Now shifting our attention to fs/aio.c, we see that aio_setup_iocb()
also ends up calling compat_rw_copy_check_uvector() through
aio_setup_vectored_rw(). Unfortunately, the access_ok() check appears to
be missing. Same situation for
security/keys/compat.c:compat_keyctl_instantiate_key_iov().
I propose that we add the access_ok() check directly into
compat_rw_copy_check_uvector(), so callers don't have to worry about it,
and it therefore makes the compat call code similar to its non-compat
counterpart. Place the access_ok() check in the same location where
copy_from_user() can trigger a -EFAULT error in the non-compat code, so
the ABI behaviors are alike on both compat and non-compat.
While we are here, fix compat_do_readv_writev() so it checks for
compat_rw_copy_check_uvector() negative return values.
And also, fix a memory leak in compat_keyctl_instantiate_key_iov() error
handling.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This fixes CVE-2013-1792.
There is a race in install_user_keyrings() that can cause a NULL pointer
dereference when called concurrently for the same user if the uid and
uid-session keyrings are not yet created. It might be possible for an
unprivileged user to trigger this by calling keyctl() from userspace in
parallel immediately after logging in.
Assume that we have two threads both executing lookup_user_key(), both
looking for KEY_SPEC_USER_SESSION_KEYRING.
THREAD A THREAD B
=============================== ===============================
==>call install_user_keyrings();
if (!cred->user->session_keyring)
==>call install_user_keyrings()
...
user->uid_keyring = uid_keyring;
if (user->uid_keyring)
return 0;
<==
key = cred->user->session_keyring [== NULL]
user->session_keyring = session_keyring;
atomic_inc(&key->usage); [oops]
At the point thread A dereferences cred->user->session_keyring, thread B
hasn't updated user->session_keyring yet, but thread A assumes it is
populated because install_user_keyrings() returned ok.
The race window is really small but can be exploited if, for example,
thread B is interrupted or preempted after initializing uid_keyring, but
before doing setting session_keyring.
This couldn't be reproduced on a stock kernel. However, after placing
systemtap probe on 'user->session_keyring = session_keyring;' that
introduced some delay, the kernel could be crashed reliably.
Fix this by checking both pointers before deciding whether to return.
Alternatively, the test could be done away with entirely as it is checked
inside the mutex - but since the mutex is global, that may not be the best
way.
Signed-off-by: David Howells <dhowells@redhat.com>
Reported-by: Mateusz Guzik <mguzik@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Jeff Layton