MEDIA_STATE_VFE only accepts the 'maximum number of threads' in the
range [0, n-1] where n is #EU * (#threads/EU) with the number of threads
based on plaform and the number of EU based on the number of slices and
subslices. This is a fixed number per platform/gt, so appropriately
limit the number of threads we spawn to match the device.
v2: Oversaturate the system with tasks to force execution on every HW
thread; if the thread idles it is returned to the pool and may be reused
again before an unused thread.
v3: Fix more state commands, which was causing Baytrail to barf.
v4: STATE_CACHE_INVALIDATE requires a stall on Ivybridge
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2024
Fixes: 47f8253d2b ("drm/i915/gen7: Clear all EU/L3 residual contexts")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Randy Wright <rwright@hpe.com>
Cc: stable@vger.kernel.org # v5.7+
Reviewed-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111225220.3483-1-chris@chris-wilson.co.uk
(cherry picked from commit eebfb32e26)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
SDM630 and MSM8998 are among the SoCs that use Qualcomm's implementation
of SMMUv2 which has already proven to be problematic over the years. Add
their compatibles to the lookup list to prevent the platforms from being
shut down by the hypervisor at MMU probe.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210109165622.149777-1-konrad.dybcio@somainline.org
Signed-off-by: Will Deacon <will@kernel.org>
The VT-d hardware will ignore those Addr bits which have been masked by
the AM field in the PASID-based-IOTLB invalidation descriptor. As the
result, if the starting address in the descriptor is not aligned with
the address mask, some IOTLB caches might not invalidate. Hence people
will see below errors.
[ 1093.704661] dmar_fault: 29 callbacks suppressed
[ 1093.704664] DMAR: DRHD: handling fault status reg 3
[ 1093.712738] DMAR: [DMA Read] Request device [7a:02.0] PASID 2
fault addr 7f81c968d000 [fault reason 113]
SM: Present bit in first-level paging entry is clear
Fix this by using aligned address for PASID-based-IOTLB invalidation.
Fixes: 1c4f88b7f1 ("iommu/vt-d: Shared virtual address in scalable mode")
Reported-and-tested-by: Guo Kaijie <Kaijie.Guo@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20201231005323.2178523-2-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
We are able to power down the GPU and audio via the GPU driver
so flag these asics as supporting runtime pm.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20210105175245.963451-1-alexander.deucher@amd.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As snd_fw_async_midi_port.consume_bytes is unsigned int, and
NSEC_PER_SEC is 1000000000L, the second multiplication in
port->consume_bytes * 8 * NSEC_PER_SEC / 31250
always overflows on 32-bit platforms, truncating the result. Fix this
by precalculating "NSEC_PER_SEC / 31250", which is an integer constant.
Note that this assumes port->consume_bytes <= 16777.
Fixes: 531f471834 ("ALSA: firewire-lib/firewire-tascam: localize async midi port")
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210111130251.361335-3-geert+renesas@glider.be
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As snd_ff.rx_bytes[] is unsigned int, and NSEC_PER_SEC is 1000000000L,
the second multiplication in
ff->rx_bytes[port] * 8 * NSEC_PER_SEC / 31250
always overflows on 32-bit platforms, truncating the result. Fix this
by precalculating "NSEC_PER_SEC / 31250", which is an integer constant.
Note that this assumes ff->rx_bytes[port] <= 16777.
Fixes: 1917429578 ("ALSA: fireface: add transaction support")
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210111130251.361335-2-geert+renesas@glider.be
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently hda on tegra30 fails to open a stream with an input/output error.
For example:
speaker-test -Dhw:0,3 -c 2
speaker-test 1.2.2
Playback device is hw:0,3
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 64 to 16384
Period size range from 32 to 8192
Using max buffer size 16384
Periods = 4
was set period_size = 4096
was set buffer_size = 16384
0 - Front Left
Write error: -5,Input/output error
xrun_recovery failed: -5,Input/output error
Transfer failed: Input/output error
The tegra-hda device was introduced in tegra30 but only utilized in
tegra124 until recent chips. Tegra210/186 work only due to a hardware
change. For this reason it is unknown when this issue first manifested.
Discussions with the hardware team show this applies to all current tegra
chips. It has been resolved in the tegra234, which does not have hda
support at this time.
The explanation from the hardware team is this:
Below is the striping formula referenced from HD audio spec.
{ ((num_channels * bits_per_sample) / number of SDOs) >= 8 }
The current issue is seen because Tegra HW has a problem with boundary
condition (= 8) for striping. The reason why it is not seen on
Tegra210/Tegra186 is because it uses max 2SDO lines. Max SDO lines is
read from GCAP register.
For the given stream (channels = 2, bps = 16);
ratio = (channels * bps) / NSDO = 32 / NSDO;
On Tegra30, ratio = 32/4 = 8 (FAIL)
On Tegra210/186, ratio = 32/2 = 16 (PASS)
On Tegra194, ratio = 32/4 = 8 (FAIL) ==> Earlier workaround was
applied for it
If Tegra210/186 is forced to use 4SDO, it fails there as well. So the
behavior is consistent across all these chips.
Applying the fix in [1] universally resolves this issue on tegra30-hda.
Tested on the Ouya game console and the tf201 tablet.
[1] commit 60019d8c65 ("ALSA: hda/tegra: workaround playback failure on
Tegra194")
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Ion Agorria <ion@agorria.com>
Reviewed-by: Sameer Pujar <spujar@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20210108135913.2421585-3-pgwipeout@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Current implementation defaults the hda clocks to clk_m. This causes hda
to run too slow to operate correctly. Fix this by defaulting to pll_p and
setting the frequency to the correct rate.
This matches upstream t124 and downstream t30.
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Ion Agorria <ion@agorria.com>
Acked-by: Sameer Pujar <spujar@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20210108135913.2421585-2-pgwipeout@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
set_pages_wb() might sleep and so we can't do this in an atomic context.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Fixes: d099fc8f54 ("drm/ttm: new TT backend allocation pool v3")
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/413409/
MIXART.txt has been converted to ReST and renamed. Fix the reference
in alsa-configuration.rst.
Fixes: 3d8e81862c ("ALSA: doc: ReSTize MIXART.txt")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210101221942.1068388-1-j.neuschaefer@gmx.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a bug that causes early crashes in builds with an .exit.text
section smaller than a page and an .init.text section that ends in the
beginning of a physical page (this is kinda random, which might
explain why this wasn't really encountered before).
The init sections are ordered like this:
.init.text
.exit.text
.init.data
Currently, these sections aren't page aligned.
Because the init code might become read-only at runtime and because
the .init.text section can potentially reside on the same physical
page as .init.data, the beginning of .init.data might be mapped
read-only along with .init.text.
Then when the kernel tries to modify a variable in .init.data (like
kthreadd_done, used in kernel_init()) the kernel panics.
To avoid this, make _einittext page aligned and also align .exit.text
to make sure .init.data is always seperated from the text segments.
Fixes: 060ef9d89d ("powerpc32: PAGE_EXEC required for inittext")
Signed-off-by: Ariel Marcovitch <ariel.marcovitch@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210102201156.10805-1-ariel.marcovitch@gmail.com
Willem de Bruijn says:
====================
skb frag: kmap_atomic fixes
skb frags may be backed by highmem and/or compound pages. Various
code calls kmap_atomic to safely access highmem pages. But this
needs additional care for compound pages. Fix a few issues:
patch 1 expect kmap mappings with CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP
patch 2 fixes kmap_atomic + compound page support in skb_seq_read
patch 3 fixes kmap_atomic + compound page support in esp
====================
Link: https://lore.kernel.org/r/20210109221834.3459768-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
esp(6)_output_head uses skb_page_frag_refill to allocate a buffer for
the esp trailer.
It accesses the page with kmap_atomic to handle highmem. But
skb_page_frag_refill can return compound pages, of which
kmap_atomic only maps the first underlying page.
skb_page_frag_refill does not return highmem, because flag
__GFP_HIGHMEM is not set. ESP uses it in the same manner as TCP.
That also does not call kmap_atomic, but directly uses page_address,
in skb_copy_to_page_nocache. Do the same for ESP.
This issue has become easier to trigger with recent kmap local
debugging feature CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP.
Fixes: cac2661c53 ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f6a ("esp6: Avoid skb_cow_data whenever possible")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
skb_seq_read iterates over an skb, returning pointer and length of
the next data range with each call.
It relies on kmap_atomic to access highmem pages when needed.
An skb frag may be backed by a compound page, but kmap_atomic maps
only a single page. There are not enough kmap slots to always map all
pages concurrently.
Instead, if kmap_atomic is needed, iterate over each page.
As this increases the number of calls, avoid this unless needed.
The necessary condition is captured in skb_frag_must_loop.
I tried to make the change as obvious as possible. It should be easy
to verify that nothing changes if skb_frag_must_loop returns false.
Tested:
On an x86 platform with
CONFIG_HIGHMEM=y
CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP=y
CONFIG_NETFILTER_XT_MATCH_STRING=y
Run
ip link set dev lo mtu 1500
iptables -A OUTPUT -m string --string 'badstring' -algo bm -j ACCEPT
dd if=/dev/urandom of=in bs=1M count=20
nc -l -p 8000 > /dev/null &
nc -w 1 -q 0 localhost 8000 < in
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Skb frags may be backed by highmem and/or compound pages. Highmem
pages need kmap_atomic mappings to access. But kmap_atomic maps a
single page, not the entire compound page.
skb_foreach_page iterates over an skb frag, in one step in the common
case, page by page only if kmap_atomic must be called for each page.
The decision logic is captured in skb_frag_must_loop.
CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP extends kmap from highmem to all
pages, to increase code coverage.
Extend skb_frag_must_loop to this new condition.
Link: https://lore.kernel.org/linux-mm/20210106180132.41dc249d@gandalf.local.home/
Fixes: 0e91a0c698 ("mm/highmem: Provide CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP")
Reported-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MSFT ActiveSync implementation requires that the size of the response for
incoming query is to be provided in the request input length. Failure to
set the input size proper results in failed request transfer, where the
ActiveSync counterpart reports the NDIS_STATUS_INVALID_LENGTH (0xC0010014L)
error.
Set the input size for OID_GEN_PHYSICAL_MEDIUM query to the expected size
of the response in order for the ActiveSync to properly respond to the
request.
Fixes: 039ee17d1b ("rndis_host: Add RNDIS physical medium checking into generic_rndis_bind()")
Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
Link: https://lore.kernel.org/r/20210108095839.3335-1-andrey.zhizhikin@leica-geosystems.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Packet Processor hardware not connected to MAC flow control unit and
cannot support TX flow control.
This patch disable flow control support.
Fixes: 3f518509de ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Acked-by: Marcin Wojtas <mw@semihalf.com>
Link: https://lore.kernel.org/r/1610306582-16641-1-git-send-email-stefanc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The priority field is not the queue priority (queue priority is fixed)
but a bitmask of priorities assigned to this queue.
In receive, priorities relate to tagged frames priorities.
In transmit, priorities relate to PFC frames.
Signed-off-by: Seb Laveze <sebastien.laveze@nxp.com>
Link: https://lore.kernel.org/r/20210111081406.1348622-1-sebastien.laveze@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The way to blacklist notrace functions for kprobes was not using
the proper kconfig which caused some archs (powerpc) from blacklisting
them.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCX/y/kRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qqUNAP9AAvvNt1xEA9XF1fsiYTEZuRZJYh70
kmraYV2r35EPVwD+ORLRFO5eIL8j4SQlome3MuC1iFLak9SKVT5pWOLcDQI=
=AtWi
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Blacklist properly on all archs.
The code to blacklist notrace functions for kprobes was not using the
right kconfig option, which caused some archs (powerpc) to possibly
not blacklist them"
* tag 'trace-v5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/kprobes: Do the notrace functions check without kprobes on ftrace
When attempting to match EXTENDED COPY CSCD descriptors with corresponding
se_devices, target_xcopy_locate_se_dev_e4() currently iterates over LIO's
global devices list which includes all configured backstores.
This change ensures that only initiator-accessible backstores are
considered during CSCD descriptor lookup, according to the session's
se_node_acl LUN list.
To avoid LUN removal race conditions, device pinning is changed from being
configfs based to instead using the se_node_acl lun_ref.
Reference: CVE-2020-28374
Fixes: cbf031f425 ("target: Add support for EXTENDED_COPY copy offload emulation")
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
With modifiers one can actually have different format_info structs
for the same format, which now matters for AMDGPU since we convert
implicit modifiers to explicit modifiers with multiple planes.
I checked other drivers and it doesn't look like they end up triggering
this case so I think this is safe to relax.
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Zhan Liu <zhan.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Fixes: 816853f9dc ("drm/amd/display: Set new format info for converted metadata.")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210110021142.28221-1-bas@basnieuwenhuizen.nl
Enable the notrace function check on the architecture which doesn't
support kprobes on ftrace but support dynamic ftrace. This notrace
function check is not only for the kprobes on ftrace but also
sw-breakpoint based kprobes.
Thus there is no reason to limit this check for the arch which
supports kprobes on ftrace.
This also changes the dependency of Kconfig. Because kprobe event
uses the function tracer's address list for identifying notrace
function, if the CONFIG_DYNAMIC_FTRACE=n, it can not check whether
the target function is notrace or not.
Link: https://lkml.kernel.org/r/20210105065730.2634785-1-naveen.n.rao@linux.vnet.ibm.com
Link: https://lkml.kernel.org/r/161007957862.114704.4512260007555399463.stgit@devnote2
Cc: stable@vger.kernel.org
Fixes: 45408c4f92 ("tracing: kprobes: Prohibit probing on notrace function")
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
check_unmap() is producing a warning about a missing map error check.
The return value from dma_map_page() should be checked for an error, not
the caller-provided dma_addr.
Fixes: d099fc8f54 ("drm/ttm: new TT backend allocation pool v3")
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/413432/
Signed-off-by: Christian König <christian.koenig@amd.com>
Linux VM on Hyper-V crashes with the latest mainline:
[ 4.069624] detected buffer overflow in strcpy
[ 4.077733] kernel BUG at lib/string.c:1149!
..
[ 4.085819] RIP: 0010:fortify_panic+0xf/0x11
...
[ 4.085819] Call Trace:
[ 4.085819] acpi_device_add.cold.15+0xf2/0xfb
[ 4.085819] acpi_add_single_object+0x2a6/0x690
[ 4.085819] acpi_bus_check_add+0xc6/0x280
[ 4.085819] acpi_ns_walk_namespace+0xda/0x1aa
[ 4.085819] acpi_walk_namespace+0x9a/0xc2
[ 4.085819] acpi_bus_scan+0x78/0x90
[ 4.085819] acpi_scan_init+0xfa/0x248
[ 4.085819] acpi_init+0x2c1/0x321
[ 4.085819] do_one_initcall+0x44/0x1d0
[ 4.085819] kernel_init_freeable+0x1ab/0x1f4
This is because of the recent buffer overflow detection in the
commit 6a39e62abb ("lib: string.h: detect intra-object overflow in
fortified string functions")
Here acpi_device_bus_id->bus_id can only hold 14 characters, while the
the acpi_device_hid(device) returns a 22-char string
"HYPER_V_GEN_COUNTER_V1".
Per ACPI Spec v6.2, Section 6.1.5 _HID (Hardware ID), if the ID is a
string, it must be of the form AAA#### or NNNN####, i.e. 7 chars or 8
chars.
The field bus_id in struct acpi_device_bus_id was originally defined as
char bus_id[9], and later was enlarged to char bus_id[15] in 2007 in the
commit bb0958544f ("ACPI: use more understandable bus_id for ACPI
devices")
Fix the issue by changing the field bus_id to const char *, and use
kstrdup_const() to initialize it.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Tested-By: Jethro Beekman <jethro@fortanix.com>
[ rjw: Subject change, whitespace adjustment ]
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For an enabled DSC during HW readout the corresponding power reference
is taken along the CRTC power domain references in
get_crtc_power_domains(). Remove the incorrect get ref from the DSI
encoder hook.
Fixes: 2b68392e63 ("drm/i915/dsi: add support for DSC")
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201209153952.3397959-1-imre.deak@intel.com
(cherry picked from commit 3a9ec563a4)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
In rare cases a task may be exiting while io_ring_exit_work() trying to
cancel/wait its requests. It's ok for __io_sq_thread_acquire_mm()
because of SQPOLL check, but is not for __io_sq_thread_acquire_files().
Play safe and fail for both of them.
Cc: stable@vger.kernel.org # 5.5+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__io_req_task_submit() run by task_work can set mm and files, but
io_sq_thread() in some cases, and because __io_sq_thread_acquire_mm()
and __io_sq_thread_acquire_files() do a simple current->mm/files check
it may end up submitting IO with mm/files of another task.
We also need to drop it after in the end to drop potentially grabbed
references to them.
Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The pch_get_backlight(), lpt_get_backlight(), and lpt_set_backlight()
functions operate directly on the hardware registers. If inverting the
value is needed, using intel_panel_compute_brightness(), it should only
be done in the interface between hardware registers and
panel->backlight.level.
The CPU mode takeover code added in commit 5b1ec9ac7a
("drm/i915/backlight: Fix backlight takeover on LPT, v3.") reads the
hardware register and converts to panel->backlight.level correctly,
however the value written back should remain in the hardware register
"domain".
This hasn't been an issue, because GM45 machines are the only known
users of i915.invert_brightness and the brightness invert quirk, and
without one of them no conversion is made. It's likely nobody's ever hit
the problem.
Fixes: 5b1ec9ac7a ("drm/i915/backlight: Fix backlight takeover on LPT, v3.")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: <stable@vger.kernel.org> # v5.1+
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108152841.6944-1-jani.nikula@intel.com
(cherry picked from commit 0d4ced1c5b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
As with the regular suspend paths, also disable the wakeref assertions
as we disable the driver during shutdown.
Reported-by: Hans de Goede <hdegoede@redhat.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2899
Fixes: fe0f1e3bfd ("drm/i915: Shut down displays gracefully on reboot")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210104203905.19248-1-chris@chris-wilson.co.uk
(cherry picked from commit 19fe4ac6f0)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Commit 25b4620ee8 ("drm/i915/dsi: Skip delays for v3 VBTs in vid-mode")
added an intel_dsi_msleep() helper which skips sleeping if the
MIPI-sequences have a version of 3 or newer and the panel is in vid-mode;
and it moved a bunch of msleep-s over to this new helper.
This was based on my reading of the big comment around line 730 which
starts with "Panel enable/disable sequences from the VBT spec.",
where the "v3 video mode seq" column does not have any wait t# entries.
Given that this code has been used on a lot of different devices without
issues until now, it seems that my interpretation of the spec here is
mostly correct.
But now I have encountered one device, an Acer Aspire Switch 10 E
SW3-016, where the panel will not light up unless we do actually honor the
panel_on_delay after exexuting the MIPI_SEQ_PANEL_ON sequence.
What seems to set this model apart is that it is lacking a
MIPI_SEQ_DEASSERT_RESET sequence, which is where the power-on
delay usually happens.
Fix the panel not lighting up on this model by using an unconditional
msleep(panel_on_delay) instead of intel_dsi_msleep() when there is
no MIPI_SEQ_DEASSERT_RESET sequence.
Fixes: 25b4620ee8 ("drm/i915/dsi: Skip delays for v3 VBTs in vid-mode")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201118124058.26021-1-hdegoede@redhat.com
(cherry picked from commit 6fdb335f1c)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
When register_pernet_subsys() fails, nf_nat_bysource
should be freed just like when nf_ct_extend_register()
fails.
Fixes: 1cd472bf03 ("netfilter: nf_nat: add nat hook register functions to nf_nat")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Before referencing the inode, we must ensure that the superblock can be
referenced. Otherwise, we can end up with iput() calling superblock
operations that are no longer valid or accessible.
Fixes: ea7c38fef0 ("NFSv4: Ensure we reference the inode for return-on-close in delegreturn")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Before referencing the inode, we must ensure that the superblock can be
referenced. Otherwise, we can end up with iput() calling superblock
operations that are no longer valid or accessible.
Fixes: e39d8a186e ("NFSv4: Fix an Oops during delegation callbacks")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
- Search for <ncurses.h> in the default header path of HOSTCC
- Tweak the option order to be kind to old BSD awk
- Remove 'kvmconfig' and 'xenconfig' shorthands
- Fix documentation
-----BEGIN PGP SIGNATURE-----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=T0vB
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Search for <ncurses.h> in the default header path of HOSTCC
- Tweak the option order to be kind to old BSD awk
- Remove 'kvmconfig' and 'xenconfig' shorthands
- Fix documentation
* tag 'kbuild-fixes-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
Documentation: kbuild: Fix section reference
kconfig: remove 'kvmconfig' and 'xenconfig' shorthands
lib/raid6: Let $(UNROLL) rules work with macOS userland
kconfig: Support building mconf with vendor sysroot ncurses
kconfig: config script: add a little user help
MAINTAINERS: adjust GCC PLUGINS after gcc-plugin.sh removal
This is two driver fixes (megaraid_sas and hisi_sas). The megaraid
one is a revert of a previous revert of a cpu hotplug fix which
exposed a bug in the block layer which has been fixed in this merge
window and the hisi_sas performance enhancement comes from switching
to interrupt managed completion queues, which depended on the addition
of devm_platform_get_irqs_affinity() which is now upstream via the irq
tree in the last merge window.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX/tF/SYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishTYGAQDzi9Zi
iJ0uut1ex6io0q/X+DU7vwYFSfx9wILi8k8jFwD8C9O4pPfdvZyfPqLx/ol90lxW
fEIZK6p7MozgoSw7s9k=
=jp38
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is two driver fixes (megaraid_sas and hisi_sas).
The megaraid one is a revert of a previous revert of a cpu hotplug fix
which exposed a bug in the block layer which has been fixed in this
merge window.
The hisi_sas performance enhancement comes from switching to interrupt
managed completion queues, which depended on the addition of
devm_platform_get_irqs_affinity() which is now upstream via the irq
tree in the last merge window"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: hisi_sas: Expose HW queues for v2 hw
Revert "Revert "scsi: megaraid_sas: Added support for shared host tagset for cpuhotplug""
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl/7KA0QHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpn6WEACeUa97qyzm7G8/E5ejBL6lXSTRXNc8qa+h
YCdrDltkqs6OHAuEyUCwGw3zPmb7fp4M5RLZ/Dp9EtMwld45HfoN6mpRe0+i4U96
iAkHMNUo6ytp3wXX1XKgZ0FhcSOSwkQK8CMzmLPn+pxkDYzQPFg38AUISPpoDA/L
YNh4tEiHHd5oprHIzludE00m2i1oYNrBcmUe27sKxR0mak0kEJtxr4cXLrqBtN3k
9C31A0gstCINSHmQPAcRvFerDxDM0WPYQ7K6UEXfkCfbyf6i+1eG/qLUwUCdm9MD
Rjot6dXzQ2LzqJbaAZndjJRDRZx2xpC2TNlNaBjYzSOC6AXSY0MKiZBCnH/i/OoZ
f0Bq/k7LVeMbyu02cgIis4DPLabfG+XQUOniu4HQTrzK8+neApAlCwINc73cvQOb
hBS+LfUVqP6K6g3oVGSvqG01wj2HK69SWMNKTr9GZ3GIqrcWYtA/JnqFfTE7/KwC
H7rkPL8i3+NBXmjjz6hm8hx3MrnekKJpsdCBicm9OOYqJRbkGVjoUYeDFz5MElfp
k71u2WDQ81aiqfWajsJkZaUFxZgUrRzuWeyBZiQQP9kJEMzUUiDSg4K+0WJhk5bO
Y0EX0sdCz8k9IBKfi2+FcF5dYj3RDolALmBDrrcfchTW0h7vxMpn4rr/ueN7gViz
rW/Gj9pRsA==
=CClj
-----END PGP SIGNATURE-----
Merge tag 'block-5.11-2021-01-10' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Missing CRC32 selections (Arnd)
- Fix for a merge window regression with bdev inode init (Christoph)
- bcache fixes
- rnbd fixes
- NVMe pull request from Christoph:
- fix a race in the nvme-tcp send code (Sagi Grimberg)
- fix a list corruption in an nvme-rdma error path (Israel Rukshin)
- avoid a possible double fetch in nvme-pci (Lalithambika Krishnakumar)
- add the susystem NQN quirk for a Samsung driver (Gopal Tiwari)
- fix two compiler warnings in nvme-fcloop (James Smart)
- don't call sleeping functions from irq context in nvme-fc (James Smart)
- remove an unused argument (Max Gurtovoy)
- remove unused exports (Minwoo Im)
- Use-after-free fix for partition iteration (Ming)
- Missing blk-mq debugfs flag annotation (John)
- Bdev freeze regression fix (Satya)
- blk-iocost NULL pointer deref fix (Tejun)
* tag 'block-5.11-2021-01-10' of git://git.kernel.dk/linux-block: (26 commits)
bcache: set bcache device into read-only mode for BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET
bcache: introduce BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE for large bucket
bcache: check unsupported feature sets for bcache register
bcache: fix typo from SUUP to SUPP in features.h
bcache: set pdev_set_uuid before scond loop iteration
blk-mq-debugfs: Add decode for BLK_MQ_F_TAG_HCTX_SHARED
block/rnbd-clt: avoid module unload race with close confirmation
block/rnbd: Adding name to the Contributors List
block/rnbd-clt: Fix sg table use after free
block/rnbd-srv: Fix use after free in rnbd_srv_sess_dev_force_close
block/rnbd: Select SG_POOL for RNBD_CLIENT
block: pre-initialize struct block_device in bdev_alloc_inode
fs: Fix freeze_bdev()/thaw_bdev() accounting of bd_fsfreeze_sb
nvme: remove the unused status argument from nvme_trace_bio_complete
nvmet-rdma: Fix list_del corruption on queue establishment failure
nvme: unexport functions with no external caller
nvme: avoid possible double fetch in handling CQE
nvme-tcp: Fix possible race of io_work and direct send
nvme-pci: mark Samsung PM1725a as IGNORE_DEV_SUBNQN
nvme-fcloop: Fix sscanf type and list_first_entry_or_null warnings
...
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl/7J/cQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpr2IEACmFmPGOHiRgo3ET6F+pXufVtqN/TiiOKIM
GNznobO62HRL35ZTSVMH86u+koouWfoBCWtNMOq6ln2wMbNnHUKFgCdNhhX1vXPg
T404WTVFtqw19wBigLUBnANDWAHOOVOdcbShNuznE/PYgC1faz9HFjuKY7GVnrzU
xOSuw1k8P8swwf5h641fIwGI1sdyBgFHRsG8YwVBVJtmf4B8tRSQvAF1fesIPw6j
ZQTcfAAFl29Kj1Tjlog/rD75CS6xVQRd59AaJqvF8khMAsp/VHb7snAPMZJ2EEO2
6by5zNbh5mhqOhWFe7jvem+MBFGARx/Ol5cfKPehGsjLoOAk/QJU6tOYA5T1YHdY
aOB5QR/c/H7uHdWBu6pcU9sT3b7LvOJGJF+kXHt/N2A8k03jXmmWk+LoxrRsXrbr
Tvo7ehOIHdgnOuy2M9R9a/c0WtjY6mzBM9OEyFT3oa1ijM5mjAgU1YAVKJgjOa83
eeN9p50+OcFH34bDU2bGCbDdnfZvplcgcpib1p2A5H0seoci2Tn//ihJ7us4+JTP
5hZS1alkL/ngwr8LGoltS/RnJyJsP2ZJO8NzrRli66e6EflUXnJtla8zP4EASKmQ
FnD5Yt2TFtBTt/MOAhUKG2whD5uvUtJIRLll33i6gfO97LSMZVkH43pji4XEAZkR
idVotzElKw==
=+yAt
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.11-2021-01-10' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A bit larger than I had hoped at this point, but it's all changes that
will be directed towards stable anyway. In detail:
- Fix a merge window regression on error return (Matthew)
- Remove useless variable declaration/assignment (Ye Bin)
- IOPOLL fixes (Pavel)
- Exit and cancelation fixes (Pavel)
- fasync lockdep complaint fix (Pavel)
- Ensure SQPOLL is synchronized with creator life time (Pavel)"
* tag 'io_uring-5.11-2021-01-10' of git://git.kernel.dk/linux-block:
io_uring: stop SQPOLL submit on creator's death
io_uring: add warn_once for io_uring_flush()
io_uring: inline io_uring_attempt_task_drop()
io_uring: io_rw_reissue lockdep annotations
io_uring: synchronise ev_posted() with waitqueues
io_uring: dont kill fasync under completion_lock
io_uring: trigger eventfd for IOPOLL
io_uring: Fix return value from alloc_fixed_file_ref_node
io_uring: Delete useless variable ‘id’ in io_prep_async_work
io_uring: cancel more aggressively in exit_work
io_uring: drop file refs after task cancel
io_uring: patch up IOPOLL overflow_flush sync
io_uring: synchronise IOPOLL on task_submit fail
Here are a number of small USB driver fixes for 5.11-rc3.
Include in here are:
- USB gadget driver fixes for reported issues
- new usb-serial driver ids
- dma from stack bugfixes
- typec bugfixes
- dwc3 bugfixes
- xhci driver bugfixes
- other small misc usb driver bugfixes
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX/sKZg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynVlgCgtLrjhpvxkW/TegCp3kuvsI7Kj0UAniYFwZG1
1KKr2rrignh3vLMmkCAp
=IR1N
-----END PGP SIGNATURE-----
Merge tag 'usb-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of small USB driver fixes for 5.11-rc3.
Include in here are:
- USB gadget driver fixes for reported issues
- new usb-serial driver ids
- dma from stack bugfixes
- typec bugfixes
- dwc3 bugfixes
- xhci driver bugfixes
- other small misc usb driver bugfixes
All of these have been in linux-next with no reported issues"
* tag 'usb-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (35 commits)
usb: dwc3: gadget: Clear wait flag on dequeue
usb: typec: Send uevent for num_altmodes update
usb: typec: Fix copy paste error for NVIDIA alt-mode description
usb: gadget: enable super speed plus
kcov, usb: hide in_serving_softirq checks in __usb_hcd_giveback_urb
usb: uas: Add PNY USB Portable SSD to unusual_uas
usb: gadget: configfs: Preserve function ordering after bind failure
usb: gadget: select CONFIG_CRC32
usb: gadget: core: change the comment for usb_gadget_connect
usb: gadget: configfs: Fix use-after-free issue with udc_name
usb: dwc3: gadget: Restart DWC3 gadget when enabling pullup
usb: usbip: vhci_hcd: protect shift size
USB: usblp: fix DMA to stack
USB: serial: iuu_phoenix: fix DMA from stack
USB: serial: option: add LongSung M5710 module support
USB: serial: option: add Quectel EM160R-GL
USB: Gadget: dummy-hcd: Fix shift-out-of-bounds bug
usb: gadget: f_uac2: reset wMaxPacketSize
usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend regression
usb: dwc3: ulpi: Replace CPU-based busyloop with Protocol-based one
...
Here are some small staging driver fixes for 5.11-rc3. Nothing major,
just resolving some reported issues:
- cleanup some remaining mentions of the ION drivers that were
removed in 5.11-rc1
- comedi driver bugfix
- 2 error path memory leak fixes
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX/sJ2w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynrXACZASkdHO71XqECukP73ajgRD81LbQAn3igZysN
2gOnWLkJbYSoL1fDD3mx
=Jeh8
-----END PGP SIGNATURE-----
Merge tag 'staging-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes for 5.11-rc3. Nothing major,
just resolving some reported issues:
- cleanup some remaining mentions of the ION drivers that were
removed in 5.11-rc1
- comedi driver bugfix
- two error path memory leak fixes
All have been in linux-next for a while with no reported issues"
* tag 'staging-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: ION: remove some references to CONFIG_ION
staging: mt7621-dma: Fix a resource leak in an error handling path
Staging: comedi: Return -EFAULT if copy_to_user() fails
staging: spmi: hisi-spmi-controller: Fix some error handling paths
Here are some small char and misc driver fixes for 5.11-rc3.
the majority here are fixes for the habanalabs drivers, but also in here
are:
- crypto driver fix
- pvpanic driver fix
- updated font file
- interconnect driver fixes
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX/sJUw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym3/wCfYVaYBcHzr0CATzOXEbtpBlMpkkMAn1M/pOET
6RuyBJCjONwT8g4BzOq1
=jlAi
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char and misc driver fixes for 5.11-rc3.
The majority here are fixes for the habanalabs drivers, but also in
here are:
- crypto driver fix
- pvpanic driver fix
- updated font file
- interconnect driver fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (26 commits)
Fonts: font_ter16x32: Update font with new upstream Terminus release
misc: pvpanic: Check devm_ioport_map() for NULL
speakup: Add github repository URL and bug tracker
MAINTAINERS: Update Georgi's email address
crypto: asym_tpm: correct zero out potential secrets
habanalabs: Fix memleak in hl_device_reset
interconnect: imx8mq: Use icc_sync_state
interconnect: imx: Remove a useless test
interconnect: imx: Add a missing of_node_put after of_device_is_available
interconnect: qcom: fix rpmh link failures
habanalabs: fix order of status check
habanalabs: register to pci shutdown callback
habanalabs: add validation cs counter, fix misplaced counters
habanalabs/gaudi: retry loading TPC f/w on -EINTR
habanalabs: adjust pci controller init to new firmware
habanalabs: update comment in hl_boot_if.h
habanalabs/gaudi: enhance reset message
habanalabs: full FW hard reset support
habanalabs/gaudi: disable CGM at HW initialization
habanalabs: Revise comment to align with mirror list name
...
- Address the 2nd boot failure due to snafu in signal handling code
(first was generic console ttynull issue)
- miscll other fixes
-----BEGIN PGP SIGNATURE-----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=g6Gg
-----END PGP SIGNATURE-----
Merge tag 'arc-5.11-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- Address the 2nd boot failure due to snafu in signal handling code
(first was generic console ttynull issue)
- misc other fixes
* tag 'arc-5.11-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: [hsdk]: Enable FPU_SAVE_RESTORE
ARC: unbork 5.11 bootup: fix snafu in _TIF_NOTIFY_SIGNAL handling
include/soc: remove headers for EZChip NPS
arch/arc: add copy_user_page() to <asm/page.h> to fix build error on ARC
A fix for machine check handling with VMAP stack on 32-bit.
A clang build fix.
Thanks to:
Christophe Leroy, Nathan Chancellor.
-----BEGIN PGP SIGNATURE-----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=/ku0
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- A fix for machine check handling with VMAP stack on 32-bit.
- A clang build fix.
Thanks to Christophe Leroy and Nathan Chancellor.
* tag 'powerpc-5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Handle .text.{hot,unlikely}.* in linker script
powerpc/32s: Fix RTAS machine check with VMAP stack
syscalls which take 64-bit arguments to the compat handlers due to
former having a general compat handler. (Brian Gerst)
- Add a forgotten pmd page destructor call to pud_free_pmd_page() where
a pmd page is freed. (Dan Williams)
- Make IN/OUT insns with an u8 immediate port operand handling for
SEV-ES guests more precise by using only the single port byte and not
the whole s32 value of the insn decoder. (Peter Gonda)
- Correct a straddling end range check before returning the proper MTRR
type, when the end address is the same as top of memory. (Ying-Tsun
Huang)
- Change PQR_ASSOC MSR update scheme when moving a task to a resctrl
resource group to avoid significant performance overhead with some
resctrl workloads. (Fenghua Yu)
- Avoid the actual task move overhead when the task is already in the
resource group. (Fenghua Yu)
-----BEGIN PGP SIGNATURE-----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=2/Eq
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.11_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"As expected, fixes started trickling in after the holidays so here is
the accumulated pile of x86 fixes for 5.11:
- A fix for fanotify_mark() missing the conversion of x86_32 native
syscalls which take 64-bit arguments to the compat handlers due to
former having a general compat handler. (Brian Gerst)
- Add a forgotten pmd page destructor call to pud_free_pmd_page()
where a pmd page is freed. (Dan Williams)
- Make IN/OUT insns with an u8 immediate port operand handling for
SEV-ES guests more precise by using only the single port byte and
not the whole s32 value of the insn decoder. (Peter Gonda)
- Correct a straddling end range check before returning the proper
MTRR type, when the end address is the same as top of memory.
(Ying-Tsun Huang)
- Change PQR_ASSOC MSR update scheme when moving a task to a resctrl
resource group to avoid significant performance overhead with some
resctrl workloads. (Fenghua Yu)
- Avoid the actual task move overhead when the task is already in the
resource group. (Fenghua Yu)"
* tag 'x86_urgent_for_v5.11_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Don't move a task to the same resource group
x86/resctrl: Use an IPI instead of task_work_add() to update PQR_ASSOC MSR
x86/mtrr: Correct the range check before performing MTRR type lookups
x86/sev-es: Fix SEV-ES OUT/IN immediate opcode vc handling
x86/mm: Fix leak of pmd ptlock
fanotify: Fix sys_fanotify_mark() on native x86-32
Chris Wilson