On SKL the planes are uniform so the "sprites" can use the
primary plane code perfectly fine. The only difference we
have is the color key handling, but since we never enable that
for the primary plane the same code works just fine.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170317211808.14693-3-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
We are going to need it for future platforms.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
A GuC context and a HW context are in no way related, so the name "GuC context descriptor"
is very unfortunate, because a new reader of the code gets overwhelmed very quickly with
a lot of things called "context" that refer to different things. We can improve legibility
a lot by simply renaming a few objects in the GuC code.
v2:
- Rebased
- s/ctx_desc_pool/stage_desc_pool
- Move some explanations to the definition of the guc_stage_desc struct (Chris)
v3:
- Calculate gemsize with less intermediate steps (Joonas)
- Use BIT() macro (Joonas)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Some recent refactoring patches have left the doorbell creation outside
the GuC client allocation, which does not make a lot of sense (a client
without a doorbell is something useless). Move it back there, and
refactor the init_doorbell_hw consequently.
Thanks to this, we can do some other improvements, like hoisting the
check for GuC submission enabled out of the enable function.
v2: Rebased.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Doorbell release flow requires that we wait for GEN8_DRB_VALID bit to go
to zero after updating db_status before we call the GuC to release the
doorbell.
Kudos to Daniele for finding this out.
v2: WARN instead of DRM_ERROR (Joonas)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
While at it, fix a typo (s/ring_lcra/ring_lrca) and improve the naming of one
firware interface field (s/ring_tail/submit_element_info, since it can contain
more than just the ring tail).
No change in functionality.
v2:
- Remove reference to "unique user" of the GuC (Daniele)
- Keep mention to renaming from "GuC context" to "client" (Daniele)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Prepare for an alternate GuC communication interface.
v2: Make a few functions static and name them correctly while we are at it (Oscar), but
leave an intel_guc_send_mmio interface for users that require old-style communication.
v3: Send intel_uc_init_early back to the top (Michal).
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
When initializing the GuC log struct, there is an object we need to
allocate always, since the GuC needs its address at fw load time.
The rest is only needed during runtime, in the sense that we only
create if we actually enable GuC logging. Make that distinction
explicit by subdividing further the intel_guc_log struct.
v2: Call the new struct "runtime", instead of "extras" (Joonas)
v3: Check indent (Joonas)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
It's mandatory and it gets created if and only if GuC submission is enabled, so that should be
the condition for informing the GuC about it.
Also s/guc_addon_create/guc_ads_create and s/guc_addon_destroy/guc_ads_destroy and, while
at it, add an explanation of what things go inside the ADS object.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Starting with intel_guc_loader, down to intel_guc_submission
and finally to intel_guc_log.
v2:
- Null execbuf client outside guc_client_free (Daniele)
- Assert if things try to get allocated twice (Daniele/Joonas)
- Null guc->log.buf_addr when destroyed (Daniele)
- Newline between returning success and error labels (Joonas)
- Remove some unnecessary comments (Joonas)
- Keep guc_log_create_extras naming convention (Joonas)
- Helper function guc_log_has_extras (Joonas)
- No need for separate relay_channel create/destroy. It's just another extra.
- No need to nullify guc->log.flush_wq when destroyed (Joonas)
- Hoist the check for has_extras out of guc_log_create_extras (Joonas)
- Try to do i915_guc_log_register/unregister calls (kind of) symmetric (Daniele)
- Make sure initel_guc_fini is not called before init is ever called (Daniele)
v3:
- Remove unnecessary parenthesis (Joonas)
- Check for logs enabled on debugfs registration
- Rebase on top of Tvrtko's "Fix request re-submission after reset"
v4:
- Rebased
- Comment around enabling/disabling interrupts inside GuC logging (Joonas)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The GuC descriptor is big in size. If we use a local definition of
guc_desc we have a chance to overflow stack, so avoid it.
Also, Chris abhors scatterlists :)
v2: Rebased, helper function to retrieve the context descriptor,
s/ctx_pool_vma/ctx_pool/
v3: Zero out guc_context_desc before initialization
v4: Do not do arithmetic on void pointers (Daniele)
v5: Nicer than arithmetic on pointers (Chris, Joonas)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Started adding proper teardown to guc_client_alloc, ended up removing
quite a few dead ends where errors communicating with the GuC were
silently ignored. There also seemed to be quite a few erronous
teardown actions performed in case of an error (ordering wrong).
v2:
- Increase function symmetry/proximity (Michal/Daniele)
- Fix __reserve_doorbell accounting for high priority (Daniele)
- Call __update_doorbell_desc! (Daniele)
- Isolate __guc_{,de}allocate_doorbell (Michal/Daniele)
v3:
- "Select" a cacheline is a more accurate verb than "reserve" (Daniele).
- We cannot update & create the doorbell without reserving it first, so
move the whole doorbell creation for execbuf_client to the submission
enable (Oscar).i
- Add a fixme for ignoring possible doorbell destroy errors.
v4:
- Remove comment about is_high_priority (Daniele)
- Debug message typo (Daniele)
- Reuse __get_doorbell in more places (Daniele)
- Do not do arithmetic on void pointers (Daniele)
- Add comment to __reset_doorbell (Daniele)
v5:
- gccisms like arithmetic on void pointers are not frowned upon (Oscar)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Ensure that before we overwrite the reservation_object with our
exclusive fence for the pending clflush operation, that we do wait upon
all the fences in the current reservation_object.
Fixes: 57822dc6b9 ("drm/i915: Perform object clflushing asynchronously")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323085758.11695-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
We can relax the requirement upon ourselves that the forcewake is
released immediately and just allow it to occur naturally following our
mmio request.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323101944.21627-5-chris@chris-wilson.co.uk
Use find-first-set bitop to quickly scan through the fw_domains mask and
skip iterating over unused domains.
v2: Move the WARN into the caller, to prevent compiler warnings in
normal builds.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323101944.21627-4-chris@chris-wilson.co.uk
In the next patch we will begin to sanity check that we do not attempt
to obtain the forcewake on an unsupport domain. However, that is exactly
what we do during reset of the fw_domains - rectify it before it explodes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323101944.21627-3-chris@chris-wilson.co.uk
In the next patch we will begin to sanity check that we do not attempt
to obtain the forcewake on an unsupport domain. However, that is exactly
what we do during our actual initialisation of fw_domains - rectify it
before it explodes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323101944.21627-2-chris@chris-wilson.co.uk
Pass along the drm_i915_private pointer from the caller, rather than
looking it up from each fw_domain during fw_domains_get/_put. This
allows us to then eliminate the backpointer, in exchange for a more
complicated unwrapping procedure in the rare
intel_uncore_fw_release_timer().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323101944.21627-1-chris@chris-wilson.co.uk
Commit e8a9c58fcd ("drm/i915: Unify active context tracking between
legacy/execlists/guc") converted the legacy intel_ringbuffer submission
to the same context pinning mechanism as execlists - that is to pin the
context until the subsequent request is retired. Previously it used the
vma retirement of the context object to keep itself pinned until the
next request (after i915_vma_move_to_active()). In the conversion, I
missed that the vma retirement was also responsible for marking the
object as dirty. Mark the context object as dirty when pinning
(equivalent to execlists) which ensures that if the context is swapped
out due to mempressure or suspend/hibernation, when it is loaded back in
it does so with the previous state (and not all zero).
Fixes: e8a9c58fcd ("drm/i915: Unify active context tracking between legacy/execlists/guc")
Reported-by: Dennis Gilmore <dennis@ausil.us>
Reported-by: Mathieu Marquer <mathieu.marquer@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99993
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100181
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.11-rc1
Link: http://patchwork.freedesktop.org/patch/msgid/20170322205930.12762-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Words cannot describe the embarrassment at creating a new gfp_t relaim to
only prevent the oomkiller but allow direct|kswapd reclaim, and then not
use it in the shmem_read_mapping_page_gfp().
Fixes: 24f8e00a8a ("drm/i915: Prefer to report ENOMEM rather than incur the oom for gfx allocations")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322223447.7493-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYzznuAAoJEHm+PkMAQRiGAzMIAJDBo5otTMMLhg8eKj8Cnab4
2NyaoWDN6mtU427rzEKEfZlTtp3gIBVdFex5x442weIdw6BgRQW0dvF/uwEn08yI
9Wx7VJmIUyH9M8VmhDtkUTFrhwUGr29qb3JhENMd7tv/CiJaehGRHCT3xqo5BDdu
xiyPcwSkwP/NH24TS91G87gV6r0I0oKLSAxu+KifEFESrb8gaZaduslzpEj3m/Ds
o9EPpfzaiGAdW5EdNfPtviYbBk7ZOXwtxdMV+zlvsLcaqtYnFEsJZd2WyZL0zGML
VXBVxaYtlyTeA7Mt8YYUL+rDHELSOtCeN5zLfxUvYt+Yc0Y6LFBLDOE5h8b3eCw=
=uKUo
-----END PGP SIGNATURE-----
BackMerge tag 'v4.11-rc3' into drm-next
Linux 4.11-rc3 as requested by Daniel
drm-misc for 4.12, 2nd attempt this week:
- topic branch from Jon Corbet for the new graph kerneldoc support
- lots of graphs for kms/atomic things using the above
- some vblank query tuning from Chris
- gem/cma_fops macros
- moar docs
Driver stuff:
- vc4 hdmi audio, yay (Eric)
- dw-hdmi polish from a bunch of people
- some rockchip dp updates that didn't make last week (Chris Zhong)
- misc bridge&driver updates
* tag 'drm-misc-next-2017-03-21' of git://anongit.freedesktop.org/git/drm-misc: (37 commits)
drm/edid: detect SCDC support in HF-VSDB
drm/edid: detect SCDC support in HF-VSDB
drm/edid: check for HF-VSDB block
drm: Add SCDC helpers
drm: bridge: dw-hdmi: add HDMI vendor specific infoframe config
drm/bridge: dw_hdmi: support i2c extended read mode
drm/msm: add stubs for msm_{perf,rd}_debugfs_cleanup
drm: bochs: Don't remove uninitialized fbdev framebuffer
drm: vc4: remove redundant check of plane being non-null
drm/vc4: use platform_register_drivers
dma-fence: add dma_fence_match_context helper
drm/vc4: Add HDMI audio support
dt-bindings: Document the dmas and dma-names properties for VC4 HDMI
drm/atmel-hlcdc: Fix suspend/resume implementation
drm: Skip the waitqueue setup for vblank queries
drm: Defer disabling the vblank IRQ until the next interrupt (for instant-off)
drm/doc: atomic overview, with graph
drm/doc: diagram for mode objects and properties
drm/doc: Consistent kerneldoc include order
drm/doc: Add KMS overview graphs
...
More in i915 for 4.12:
- designware i2c fixes from Hans de Goede, in a topic branch shared
with other subsystems (maybe, they didn't confirm, but requested the
pull)
- drop drm_panel usage from the intel dsi vbt panel (Jani)
- vblank evasion improvements and tracing (Maarten and Ville)
- clarify spinlock irq semantics again a bit (Tvrtko)
- new ->pwrite backend hook (right now just for shmem pageche writes),
from Chris
- more planar/ccs work from Ville
- hotplug safe connector iterators everywhere
- userptr fixes (Chris)
- selftests for cache coloring eviction (Matthew Auld)
- extend debugfs drop_caches interface for shrinker testing (Chris)
- baytrail "the rps kills the machine" fix (Chris)
- use new atomic state iterators, a lot (Maarten)
- refactor guc/huc code some (Arkadiusz Hiler)
- tighten breadcrumbs rbtree a bit (Chris)
- improve wrap-around and time handling in rps residency counters
(Mika)
- split reset-in-progress in two flags, backoff and handoff (Chris)
- other misc reset improvements from a few people
- bunch of vgpu interaction fixes with recent code changes
- misc stuff all over, as usual
* tag 'drm-intel-next-2017-03-20' of git://anongit.freedesktop.org/git/drm-intel: (144 commits)
drm/i915: Update DRIVER_DATE to 20170320
drm/i915: Initialise i915_gem_object_create_from_data() directly
drm/i915: Correct error handling for i915_gem_object_create_from_data()
drm/i915: i915_gem_object_create_from_data() doesn't require struct_mutex
drm/i915: Retire an active batch pool object rather than allocate new
drm/i915: Add i810/i815 pci-ids for completeness
drm/i915: Skip execlists_dequeue() early if the list is empty
drm/i915: Stop using obj->obj_exec_link outside of execbuf
drm/i915: Squelch WARN for VLV_COUNTER_CONTROL
drm/i915/glk: Enable pooled EUs for Geminilake
drm/i915: Remove superfluous i915_add_request_no_flush() helper
drm/i915/vgpu: Neuter forcewakes for VGPU more thoroughly
drm/i915: Fix vGPU balloon for ggtt guard page
drm/i915: Avoid use-after-free of ctx in request tracepoints
drm/i915: Assert that the context pin_counts do not overflow
drm/i915: Wait for reset to complete before returning from debugfs/i915_wedged
drm/i915: Restore engine->submit_request before unwedging
drm/i915: Move engine->submit_request selection to a vfunc
drm/i915: Split I915_RESET_IN_PROGRESS into two flags
drm/i915: make context status notifier head be per engine
...
Use intel_wm_plane_visible() to determine cursor visibility for SKL+
also. Previously SKL+ would check the actual visibility which now
conflicts with the assumptions in intel_legacy_cursor_update().
We also change SKL+ to compute the cursor watermarks based on the
unclipped cursor size, just as we do on all the other platforms.
Using the clipped size could now result in garbage results.
Testcase: igt/kms_chv_cursor_fail
Fixes: a5509abda4 ("drm/i915: Fix legacy cursor vs. watermarks for ILK-BDW")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100195
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170314151050.12194-2-ville.syrjala@linux.intel.com
Tested-by: Dorota Czaplejewicz <dorota.czaplejewicz@collabora.co.uk>
Tested-by: Jari Tahvanainen <jari.tahvanainen@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
All platforms that lack double buffered watermarks will need to
handle the legacy cursor updates in the same way. So let's extract the
logic to determine the plane visibility into a small helper. For
simplicity we'll make the function DTRT for any plane, but only apply
the special sauce for cursor planes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170314151050.12194-1-ville.syrjala@linux.intel.com
Tested-by: Dorota Czaplejewicz <dorota.czaplejewicz@collabora.co.uk>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Since gfx allocations tend to be large, unmovable and disposable, report
the allocation failure back to userspace as an ENOMEM rather than incur
the oomkiller. We have already tried to make room by purging our own
cached gfx objects, and the oomkiller doesn't attribute ownership of gfx
objects so will likely pick the wrong candidate. Instead, let userspace
see the ENOMEM.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322110521.29930-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Because {hsw,skl,bxt}_ddi_pll_select all pretty much do the same thing
in slightly different ways. Replace everything with a simple copy of
the function and inline it inside intle_ddi_pll_select().
v2: s/return pll/return pll != NULL/ (Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1490209125-20046-1-git-send-email-paulo.r.zanoni@intel.com
According to BSpec, "The CD clock frequency must be at least twice the
frequency of the Azalia BCLK." and BCLK is configured to 96 MHz by
default. This check is needed because BXT and GLK support cdclk
frequencies less than 192 MHz.
v2: Include other Gen9 platforms too for completeness.(Paulo)
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489531556-2926-1-git-send-email-dhinakaran.pandiyan@intel.com
Implement the DP-Audio cdclk restriction for GLK, similar to what is
implemented for BDW and other GEN9 platforms. The max. pixel clock
adjustment for GLK, however factors in the 2 pixels per clock output that
GLK generates.
Separating min. cdclk and max. pixel_rate would be nicer, but let's
defer that to future and fix the GLK bug for now.
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1488931972-2865-1-git-send-email-dhinakaran.pandiyan@intel.com
Storing the position of the breadcrumb of the last retired request as
a separate last_retired_head is superfluous as we always copy that into
head prior to recalculation of the intel_ring.space.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170321102552.24357-1-chris@chris-wilson.co.uk
Rather than impose the cost of a locked test before queuing a new
request, reduce it to a simple test_bit() with a following clear_bit()
prior to doing the CSB check. This ensure that if an interrupt does
occur whilst reading from the CSB, we still detect it (the interrupt
would trigger a rescheduling of the tasklet anyway).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170321113320.2603-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
We get a warning with gcc-7 about a pointless comparison when
using a linear memmap:
drivers/gpu/drm/i915/selftests/scatterlist.c: In function 'alloc_table':
drivers/gpu/drm/i915/selftests/scatterlist.c:219:66: error: self-comparison always evaluates to false [-Werror=tautological-compare]
Splitting out the comparison into a separate function avoids the warning
and makes it slightly more obvious what happens.
Fixes: 935a2f776a ("drm/i915: Add some selftests for sg_table manipulation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20170320094335.1266306-2-arnd@arndb.de
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
As intel_engine_init_global_seqno() may be called by
nop_submit_request() from inside irq context, we have to use atomic
versions of kmap/kunmap. This is rare as this requires using gen8 legacy
ringbuffer submission.
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170320145609.4898-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
It has to be called after the global seqno has been assigned.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 31de73501a ("drm/i915/scheduler: emulate a scheduler for guc")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170320132556.29286-1-tvrtko.ursulin@linux.intel.com
This patch does following:
- Adds a new structure (drm_hdmi_info) in drm_display_info.
This structure will be used to save and indicate if sink
supports advanced HDMI 2.0 features
- Adds another structure drm_scdc within drm_hdmi_info, to
reflect scdc support and capabilities in connected HDMI 2.0 sink.
- Checks the HF-VSDB block for presence of SCDC, and marks it
in scdc structure
- If SCDC is present, checks if sink is capable of generating
SCDC read request, and marks it in scdc structure.
V2: Addressed review comments
Thierry:
- Fix typos in commit message and make abbreviation consistent
across the commit message.
- Change structure object name from hdmi_info -> hdmi
- Fix typos and abbreviations in description of structure drm_hdmi_info
end the description with a full stop.
- Create a structure drm_scdc, and keep all information related to SCDC
register set (supported, read request supported) etc in it.
Ville:
- Change rr -> read_request
- Call drm_detect_scrambling function drm_parse_hf_vsdb so that all
of HF-VSDB parsing can be kept in same function, in incremental
patches.
V3: Rebase.
V4: Rebase.
V5: Rebase.
V6: Addressed review comments from Ville
- Add clock rate calculations for 1/10 and 1/40 ratios
- Remove leftovers from old patchset
V7: Added R-B from Jose.
V8: Rebase.
V9: Rebase.
V10: Rebase.
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-5-git-send-email-shashank.sharma@intel.com
This patch does following:
- Adds a new structure (drm_hdmi_info) in drm_display_info.
This structure will be used to save and indicate if sink
supports advanced HDMI 2.0 features
- Adds another structure drm_scdc within drm_hdmi_info, to
reflect scdc support and capabilities in connected HDMI 2.0 sink.
- Checks the HF-VSDB block for presence of SCDC, and marks it
in scdc structure
- If SCDC is present, checks if sink is capable of generating
SCDC read request, and marks it in scdc structure.
V2: Addressed review comments
Thierry:
- Fix typos in commit message and make abbreviation consistent
across the commit message.
- Change structure object name from hdmi_info -> hdmi
- Fix typos and abbreviations in description of structure drm_hdmi_info
end the description with a full stop.
- Create a structure drm_scdc, and keep all information related to SCDC
register set (supported, read request supported) etc in it.
Ville:
- Change rr -> read_request
- Call drm_detect_scrambling function drm_parse_hf_vsdb so that all
of HF-VSDB parsing can be kept in same function, in incremental
patches.
V3: Rebase.
V4: Rebase.
V5: Rebase.
V6: Rebase.
V7: Added R-B from Jose.
V8: Rebase.
V9: Rebase.
V10: Rebase.
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-4-git-send-email-shashank.sharma@intel.com
This patch implements a small function that finds if a
given CEA db is hdmi-forum vendor specific data block
or not.
V2: Rebase.
V3: Added R-B from Jose.
V4: Rebase
V5: Rebase
V6: Rebase
V7: Rebase
V8: Rebase
V9: Rebase
V10: Rebase
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-3-git-send-email-shashank.sharma@intel.com
SCDC is a mechanism defined in the HDMI 2.0 specification that allows
the source and sink devices to communicate.
This commit introduces helpers to access the SCDC and provides the
symbolic names for the various registers defined in the specification.
V2: Rebase.
V3: Added R-B from Jose.
V4: Rebase
V5: Addressed review comments from Ville
- Handle the I2c return values in a better way (dp_dual_mode)
- Make the macros for SCDC Major/Minor more readable, by adding
a 'GET' in the macro names
V6: Rebase
V7: Rebase
V8: Rebase
V9: Rebase
V10: Rebase
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-2-git-send-email-shashank.sharma@intel.com
Ville Syrjälä