When creating a file that already exists in a read-only directory with
O_EXCL, the NFSv3 server returns EACCES rather than EEXIST (which local
files and the NFSv4 server return). Fix this by checking the MAY_CREATE
permission only if the file does not exist. Since this already happens
in do_nfsd_create, the check in nfsd3_proc_create can simply be removed.
Signed-off-by: Ross Lagerwall <rosslagerwall@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently, we hold the state_lock when releasing the lease. That's
potentially problematic in the future if we allow for setlease methods
that can sleep. Move the nfs4_put_deleg_lease call out of the delegation
unhashing routine (which was always a bit goofy anyway), and into the
unlocked sections of the callers of unhash_delegation_locked.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently these fields are protected with the state_lock, but that
doesn't really make a lot of sense. These fields are "private" to the
nfs4_file, and can be protected with the more granular fi_lock.
The fi_lock is already held when setting these fields. Make the code
hold the fp->fi_lock when clearing the lease-related fields in the
nfs4_file, and no longer require that the state_lock be held when
calling into this function.
To prevent lock inversion with the i_lock, we also move the vfs_setlease
and fput calls outside of the fi_lock. This also sets us up for allowing
vfs_setlease calls to block in the future.
Finally, remove a redundant NULL pointer check. unhash_delegation_locked
locks the fp->fi_lock prior to that check, so fp in that function must
never be NULL.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We would normally expect the xid and the checksum to be the best
discriminators. Check them before looking at the procedure number,
etc.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...so we can remove the spinlocking around it.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Now that the lru list is per-bucket, we don't need a second list for
searches.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull nfsd updates from Bruce Fields:
"This includes a major rewrite of the NFSv4 state code, which has
always depended on a single mutex. As an example, open creates are no
longer serialized, fixing a performance regression on NFSv3->NFSv4
upgrades. Thanks to Jeff, Trond, and Benny, and to Christoph for
review.
Also some RDMA fixes from Chuck Lever and Steve Wise, and
miscellaneous fixes from Kinglong Mee and others"
* 'for-3.17' of git://linux-nfs.org/~bfields/linux: (167 commits)
svcrdma: remove rdma_create_qp() failure recovery logic
nfsd: add some comments to the nfsd4 object definitions
nfsd: remove the client_mutex and the nfs4_lock/unlock_state wrappers
nfsd: remove nfs4_lock_state: nfs4_state_shutdown_net
nfsd: remove nfs4_lock_state: nfs4_laundromat
nfsd: Remove nfs4_lock_state(): reclaim_complete()
nfsd: Remove nfs4_lock_state(): setclientid, setclientid_confirm, renew
nfsd: Remove nfs4_lock_state(): exchange_id, create/destroy_session()
nfsd: Remove nfs4_lock_state(): nfsd4_open and nfsd4_open_confirm
nfsd: Remove nfs4_lock_state(): nfsd4_delegreturn()
nfsd: Remove nfs4_lock_state(): nfsd4_open_downgrade + nfsd4_close
nfsd: Remove nfs4_lock_state(): nfsd4_lock/locku/lockt()
nfsd: Remove nfs4_lock_state(): nfsd4_release_lockowner
nfsd: Remove nfs4_lock_state(): nfsd4_test_stateid/nfsd4_free_stateid
nfsd: Remove nfs4_lock_state(): nfs4_preprocess_stateid_op()
nfsd: remove old fault injection infrastructure
nfsd: add more granular locking to *_delegations fault injectors
nfsd: add more granular locking to forget_openowners fault injector
nfsd: add more granular locking to forget_locks fault injector
nfsd: add a list_head arg to nfsd_foreach_client_lock
...
Add some comments that describe what each of these objects is, and how
they related to one another.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Also destroy_clientid and bind_conn_to_session.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Remove the old nfsd_for_n_state function and move nfsd_find_client
higher up into the file to get rid of forward declaration. Remove
the struct nfsd_fault_inject_op arguments from the operations as
they are no longer needed by any of them.
Finally, remove the old "standard" get and set routines, which
also eliminates the client_mutex from this code.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...instead of relying on the client_mutex.
Also, fix up the printk output that is generated when the file is read.
It currently says that it's reporting the number of open files, but
it's actually reporting the number of openowners.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In a later patch, we'll want to collect the locks onto a list for later
destruction. If "func" is defined and "collect" is defined, then we'll
add the lock stateid to the list.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...which uses the client_lock for protection instead of client_mutex.
Also remove nfsd_forget_client as there are no more callers.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...that relies on the client_lock instead of client_mutex.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Add a new "get" routine for forget_clients that relies on the
client_lock instead of the client_mutex.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Now that we've added more granular locking in other places, it's time
to address the fault injection code. This code is currently quite
reliant on the client_mutex for protection. Start to change this by
adding a new set of fault injection op vectors.
For now they all use the legacy ones. In later patches we'll add new
routines that can deal with more granular locking.
Also, move some of the printk routines into the callers to make the
results of the operations more uniform.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The clid counter is a global counter currently. Move it to be a per-net
property so that it can be properly protected by the nn->client_lock
instead of relying on the client_mutex.
The verifier generator is also potentially racy if there are two
simultaneous callers. Generate the verifier when we generate the clid
value, so it's also created under the client_lock. With this, there's
no need to keep two counters as they'd always be in sync anyway, so
just use the clientid_counter for both.
As Trond points out, what would be best is to eventually move this
code to use IDR instead of the hash tables. That would also help ensure
uniqueness, but that's probably best done as a separate project.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It's possible that we'll have an in-progress call on some of the clients
while a rogue EXCHANGE_ID or DESTROY_CLIENTID call comes in. Be sure to
try and mark the client expired first, so that the refcount is
respected.
This will only be a problem once the client_mutex is removed.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If it fails, it means that the client is in use and so destroying it
would be bad. Currently, the client_mutex prevents this from happening
but once we remove it, we won't be able to do this.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
All the callers except for the fault injection code call it directly
afterward, and in the fault injection case it won't hurt to do so
anyway.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently, it's protected by the client_mutex. Move it so that the list
and the fields in the openowner are protected by the client_lock.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that the client lookup is done safely under the client_lock, so
we're not relying on the client_mutex.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...instead of relying on the client_mutex.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In particular, we want to ensure that the move_to_confirmed() is
protected by the nn->client_lock spin lock, so that we can use that when
looking up the clientid etc. instead of relying on the client_mutex.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...instead of relying on the client_mutex.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
For efficiency reasons, and because we want to use spin locks instead
of relying on the client_mutex.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The struct nfs_client is supposed to be invisible and unreferenced
before it gets here.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If we leave the client on the confirmed/unconfirmed tables, and leave
the sessions visible on the sessionid_hashtbl, then someone might
find them before we've had a chance to destroy them.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When we remove the client_mutex protection, we will need to ensure
that it can't be found by other threads while we're destroying it.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
A memory allocation failure could cause nfsd_startup_generic to fail, in
which case nfsd_users wouldn't be incorrectly left elevated.
After nfsd restarts nfsd_startup_generic will then succeed without doing
anything--the first consequence is likely nfs4_start_net finding a bad
laundry_wq and crashing.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Fixes: 4539f14981 "nfsd: replace boolean nfsd_up flag by users counter"
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...to better match other functions that deal with open/lock stateids.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When we remove the client_mutex, we'll have a potential race between
FREE_STATEID and CLOSE.
The root of the problem is that we are walking the st_locks list,
dropping the spinlock and then trying to release the persistent
reference to the lockstateid. In between, a FREE_STATEID call can come
along and take the lock, find the stateid and then try to put the
reference. That leads to a double put.
Fix this by not releasing the cl_lock in order to release each lock
stateid. Use put_generic_stateid_locked to unhash them and gather them
onto a list, and free_ol_stateid_reaplist to free any that end up on the
list.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Releasing an openowner is a bit inefficient as it can potentially thrash
the cl_lock if you have a lot of stateids attached to it. Once we remove
the client_mutex, it'll also potentially be dangerous to do this.
Add some functions to make it easier to defer the part of putting a
generic stateid reference that needs to be done outside the cl_lock while
doing the parts that must be done while holding it under a single lock.
First we unhash each open stateid. Then we call
put_generic_stateid_locked which will put the reference to an
nfs4_ol_stateid. If it turns out to be the last reference, it'll go
ahead and remove the stid from the IDR tree and put it onto the reaplist
using the st_locks list_head.
Then, after dropping the lock we'll call free_ol_stateid_reaplist to
walk the list of stateids that are fully unhashed and ready to be freed,
and free each of them. This function can sleep, so it must be done
outside any spinlocks.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Once we remove the client_mutex, it'll be possible for the sc_type of a
lock stateid to change after it's found and checked, but before we can
go to destroy it. If that happens, we can end up putting the persistent
reference to the stateid more than once, and unhash it more than once.
Fix this by unhashing the lock stateid prior to dropping the cl_lock but
after finding it.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Reduce the cl_lock trashing in destroy_lockowner. Unhash all of the
lockstateids on the lockowner's list. Put the reference under the lock
and see if it was the last one. If so, then add it to a private list
to be destroyed after we drop the lock.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Once we remove the client_mutex, we'll need to properly protect
the stateowner reference counts using the cl_lock.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Do more within the main loop, and simplify the function a bit. Also,
there's no need to take a stateowner reference unless we're going to call
release_lockowner.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Preparation for removing the client_mutex.
Convert the open owner hash table into a per-client table and protect it
using the nfs4_client->cl_lock spin lock.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Once we remove client mutex protection, we'll need to ensure that
stateowner lookup and creation are atomic between concurrent compounds.
Ensure that alloc_init_lock_stateowner checks the hashtable under the
client_lock before adding a new element.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Once we remove client mutex protection, we'll need to ensure that
stateowner lookup and creation are atomic between concurrent compounds.
Ensure that alloc_init_open_stateowner checks the hashtable under the
client_lock before adding a new element.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Once we remove client_mutex protection, it'll be possible to have an
in-flight operation using an openstateid when a CLOSE call comes in.
If that happens, we can't just put the sc_file reference and clear its
pointer without risking an oops.
Fix this by ensuring that v4.0 CLOSE operations wait for the refcount
to drop before proceeding to do so.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Change it so that only openstateids hold persistent references to
openowners. References can still be held by compounds in progress.
With this, we can get rid of NFS4_OO_NEW. It's possible that we
will create a new openowner in the process of doing the open, but
something later fails. In the meantime, another task could find
that openowner and start using it on a successful open. If that
occurs we don't necessarily want to tear it down, just put the
reference that the failing compound holds.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that lockowner references are only held by lockstateids and
operations that are in-progress. With this, we can get rid of
release_lockowner_if_empty, which will be racy once we remove
client_mutex protection.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
A necessary step toward client_mutex removal.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Allow stateowners to be unhashed and destroyed when the last reference
is put. The unhashing must be idempotent. In a future patch, we'll add
some locking around it, but for now it's only protected by the
client_mutex.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that when finding or creating a lockowner, that we get a
reference to it. For now, we also take an extra reference when a
lockowner is created that can be put when release_lockowner is called,
but we'll remove that in a later patch once we change how references are
held.
Since we no longer destroy lockowners in the event of an error in
nfsd4_lock, we must change how the seqid gets bumped in the lk_is_new
case. Instead of doing so on creation, do it manually in nfsd4_lock.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We don't want to rely on the client_mutex for protection in the case of
NFSv4 open owners. Instead, we add a mutex that will only be taken for
NFSv4.0 state mutating operations, and that will be released once the
entire compound is done.
Also, ensure that nfsd4_cstate_assign_replay/nfsd4_cstate_clear_replay
take a reference to the stateowner when they are using it for NFSv4.0
open and lock replay caching.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The way stateowners are managed today is somewhat awkward. They need to
be explicitly destroyed, even though the stateids reference them. This
will be particularly problematic when we remove the client_mutex.
We may create a new stateowner and attempt to open a file or set a lock,
and have that fail. In the meantime, another RPC may come in that uses
that same stateowner and succeed. We can't have the first task tearing
down the stateowner in that situation.
To fix this, we need to change how stateowners are tracked altogether.
Refcount them and only destroy them once all stateids that reference
them have been destroyed. This patch starts by adding the refcounting
necessary to do that.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Allow nfs4_find_stateid_by_type to take the stateid reference, while
still holding the &cl->cl_lock. Necessary step toward client_mutex
removal.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Allow nfs4_lookup_stateid to take the stateid reference, instead
of having all the callers do so.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Allow nfs4_preprocess_seqid_op to take the stateid reference, instead
of having all the callers do so.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that all the callers put the open stateid after use.
Necessary step toward client_mutex removal.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that nfsd4_open_confirm() keeps a reference to the open
stateid until it is done working with it.
Necessary step toward client_mutex removal.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Prepare nfsd4_close for a future where nfs4_preprocess_seqid_op()
hands it a fully referenced open stateid. Necessary step toward
client_mutex removal.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that nfsd4_process_open2() keeps a reference to the open
stateid until it is done working with it. Necessary step toward
client_mutex removal.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that nfsd4_process_open2() keeps a reference to the delegation
stateid until it is done working with it. Necessary step toward
client_mutex removal.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that nfs4_open_delegation() keeps a reference to the delegation
stateid until it is done working with it. Necessary step toward
client_mutex removal.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that nfsd4_locku() keeps a reference to the lock stateid
until it is done working with it. Necessary step toward client_mutex
removal.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that nfsd4_lock() references the lock stateid while it is
manipulating it. Not currently necessary, but will be once the
client_mutex is removed.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Hold the cl_lock over the bulk of these functions. In addition to
ensuring that they aren't freed prematurely, this will also help prevent
a potential race that could be introduced later. Once we remove the
client_mutex, it'll be possible for FREE_STATEID and CLOSE to race and
for both to try to put the "persistent" reference to the stateid.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Preparation for removal of the client_mutex.
Currently, no lock aside from the client_mutex is held when calling
find_lock_state. Ensure that the cl_lock is held by adding a lockdep
assertion.
Once we remove the client_mutex, it'll be possible for another thread to
race in and insert a lock state for the same file after we search but
before we insert a new one. Ensure that doesn't happen by redoing the
search after allocating a new stid that we plan to insert. If one is
found just put the one that was allocated.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Change to using the clp->cl_lock for this. For now, there's a lot of
cl_lock thrashing, but in later patches we'll eliminate that and close
the potential races that can occur when releasing the cl_lock while
walking the lists. For now, the client_mutex prevents those races.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Releasing locks when we unhash the stateid instead of doing so only when
the stateid is actually released will be problematic in later patches
when we need to protect the unhashing with spinlocks. Move it into the
sc_free operation instead.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently, this is serialized by the client_mutex, which is slated for
removal. Add finer-grained locking here. Also, do some cleanup around
find_stateid to prepare for taking references.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Benny Halevy <bhalevy@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
All stateids are associated with a nfs4_file. Let's consolidate.
Replace delegation->dl_file with the dl_stid.sc_file, and
nfs4_ol_stateid->st_file with st_stid.sc_file.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When we remove the client_mutex, we'll need to be able to ensure that
these objects aren't destroyed while we're not holding locks.
Add a ->free() callback to the struct nfs4_stid, so that we can
release a reference to the stid without caring about the contents.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It's possible for nfsd to fail opening a file that it has just created.
When that happens, we throw a WARN but it doesn't include any info about
the error code. Print the status code to give us a bit more info.
Our QA group hit some of these warnings under some very heavy stress
testing. My suspicion is that they hit the file-max limit, but it's hard
to know for sure. Go ahead and add a -ENFILE mapping to
nfserr_serverfault to make the error more distinct (and correct).
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Now that the nfs4_file has a filehandle in it, we no longer need to
keep a per-delegation copy of it. Switch to using the one in the
nfs4_file instead.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The state lock can be fairly heavily contended, and there's no reason
that nfs4_file lookups and delegation_blocked should be mutually
exclusive. Let's give the new block_delegation code its own spinlock.
It does mean that we'll need to take a different lock in the delegation
break code, but that's not generally as critical to performance.
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Move the alloc_init_deleg call into nfs4_set_delegation and change the
function to return a pointer to the delegation or an IS_ERR return. This
allows us to skip allocating a delegation if the file has already
experienced a lease conflict.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
No need to pass in a net pointer since we can derive that.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We want to convert to an atomic type so that we don't need to lock
across the call to alloc_init_deleg(). Then convert to a long type so
that we match the size of 'max_delegations'.
None of this is a problem today, but it will be once we remove
client_mutex protection.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently, both destroy_revoked_delegation and revoke_delegation
manipulate the cl_revoked list without any locking aside from the
client_mutex. Ensure that the clp->cl_lock is held when manipulating it,
except for the list walking in destroy_client. At that point, the client
should no longer be in use, and so it should be safe to walk the list
without any locking. That also means that we don't need to do the
list_splice_init there either.
Also, the fact that revoke_delegation deletes dl_recall_lru list_head
without any locking makes it difficult to know whether it's doing so
safely in all cases. Move the list_del_init calls into the callers, and
add a WARN_ON in the event that t's passed a delegation that has a
non-empty list_head.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that the delegations cannot be found by the laundromat etc once
we add them to the various 'revoke' lists.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Don't allow stateids to clear the open file pointer until they are
being destroyed. In a later patches we'll want to rely on the fact that
we have a valid file pointer when dealing with the stateid and this
will save us from having to do a lot of NULL pointer checks before
doing so.
Also, move to allocating stateids with kzalloc and get rid of the
explicit zeroing of fields.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Remove the fi_inode field in struct nfs4_file in order to remove the
possibility of struct nfs4_file pinning the inode when it does not have
any open state.
The only place we still need to get to an inode is in check_for_locks,
so change it to use find_any_file and use the inode from any that it
finds. If it doesn't find one, then just assume there aren't any.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...instead of just checking the inode that corresponds to it.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This makes more sense anyway since an inode pointer value can change
even when the filehandle doesn't.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
For use when we may not have a struct inode.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Replace a comma between expression statements by a semicolon. This changes
the semantics of the code, but given the current indentation appears to be
what is intended.
A simplified version of the Coccinelle semantic patch that performs this
transformation is as follows:
// <smpl>
@r@
expression e1,e2;
@@
e1
-,
+;
e2;
// </smpl>
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Open stateids must be initialized with the st_access_bmap and
st_deny_bmap set to 0, so that nfs4_get_vfs_file can properly record
their state in old_access_bmap and old_deny_bmap.
This bug was introduced in commit baeb4ff0e5 (nfsd: make deny mode
enforcement more efficient and close races in it) and was causing the
refcounts to end up incorrect when nfs4_get_vfs_file returned an error
after bumping the refcounts. This made it impossible to unmount the
underlying filesystem after running pynfs tests that involve deny modes.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit 8c7424cff6 "nfsd4: don't try to encode conflicting owner if low
on space" forgot to free conf->data in nfsd4_encode_lockt and before
sign conf->data to NULL in nfsd4_encode_lock_denied, causing a leak.
Worse, kfree() can be called on an uninitialized pointer in the case of
a succesful lock (or one that fails for a reason other than a conflict).
(Note that lock->lk_denied.ld_owner.data appears it should be zero here,
until you notice that it's one arm of a union the other arm of which is
written to in the succesful case by the
memcpy(&lock->lk_resp_stateid, &lock_stp->st_stid.sc_stateid,
sizeof(stateid_t));
in nfsd4_lock(). In the 32-bit case this overwrites ld_owner.data.)
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Fixes: 8c7424cff6 ""nfsd4: don't try to encode conflicting owner if low on space"
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There's a potential race between a lease break and DELEGRETURN call.
Suppose a lease break comes in and queues the workqueue job for a
delegation, but it doesn't run just yet. Then, a DELEGRETURN comes in
finds the delegation and calls destroy_delegation on it to unhash it and
put its primary reference.
Next, the workqueue job runs and queues the delegation back onto the
del_recall_lru list, issues the CB_RECALL and puts the final reference.
With that, the final reference to the delegation is put, but it's still
on the LRU list.
When we go to unhash a delegation, it's because we intend to get rid of
it soon afterward, so we don't want lease breaks to mess with it once
that occurs. Fix this by bumping the dl_time whenever we unhash a
delegation, to ensure that lease breaks don't monkey with it.
I believe this is a regression due to commit 02e1215f9f (nfsd: Avoid
taking state_lock while holding inode lock in nfsd_break_one_deleg).
Prior to that, the state_lock was held in the lm_break callback itself,
and that would have prevented this race.
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We will want to add reference counting to the lock stateid and open
stateids too in later patches.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If nfs4_setlease succesfully acquires a new delegation, then another
task breaks the delegation before we reach hash_delegation_locked, then
the breaking task will see an empty fi_delegations list and do nothing.
The client will receive an open reply incorrectly granting a delegation
and will never receive a recall.
Move more of the delegation fields to be protected by the fi_lock. It's
more granular than the state_lock and in later patches we'll want to
be able to rely on it in addition to the state_lock.
Attempt to acquire a delegation. If that succeeds, take the spinlocks
and then check to see if the file has had a conflict show up since then.
If it has, then we assume that the lease is no longer valid and that
we shouldn't hand out a delegation.
There's also one more potential (but very unlikely) problem. If the
lease is broken before the delegation is hashed, then it could leak.
In the event that the fi_delegations list is empty, reset the
fl_break_time to jiffies so that it's cleaned up ASAP by
the normal lease handling code.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
nfsd4_probe_callback kicks off some work that will eventually run
nfsd4_process_cb_update and update the session flags. In theory we
could process a following SEQUENCE call before that update happens
resulting in flags that don't accurately represent, for example, the
lack of a backchannel.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The current code always selects XPRT_TRANSPORT_BC_TCP for the back
channel, even when the forward channel was not TCP (eg, RDMA). When
a 4.1 mount is attempted with RDMA, the server panics in the TCP BC
code when trying to send CB_NULL.
Instead, construct the transport protocol number from the forward
channel transport or'd with XPRT_TRANSPORT_BC. Transports that do
not support bi-directional RPC will not have registered a "BC"
transport, causing create_backchannel_client() to fail immediately.
Fixes: https://bugzilla.linux-nfs.org/show_bug.cgi?id=265
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The first 8 ops of the compound are zeroed since they're a part of the
argument that's zeroed by the
memset(rqstp->rq_argp, 0, procp->pc_argsize);
in svc_process_common(). But we handle larger compounds by allocating
the memory on the fly in nfsd4_decode_compound(). Other than code
recently fixed by 01529e3f81 "NFSD: Fix memory leak in encoding denied
lock", I don't know of any examples of code depending on this
initialization. But it definitely seems possible, and I'd rather be
safe.
Compounds this long are unusual so I'm much more worried about failure
in this poorly tested cases than about an insignificant performance hit.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
sparse says:
fs/nfsd/auth.c:31:38: warning: incorrect type in argument 1 (different address spaces)
fs/nfsd/auth.c:31:38: expected struct cred const *cred
fs/nfsd/auth.c:31:38: got struct cred const [noderef] <asn:4>*real_cred
Add a new accessor for the ->real_cred and use that to fetch the
pointer. Accessing current->real_cred directly is actually quite safe
since we know that they can't go away so this is mostly a cosmetic fixup
to silence sparse.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Add an extra delegation state to allow the stateid to remain in the idr
tree until the last reference has been released. This will be necessary
to ensure uniqueness once the client_mutex is removed.
[jlayton: reset the sc_type under the state_lock in unhash_delegation]
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
No need to pass the delegation pointer in here as it's only used to get
the nfs4_file pointer.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
state_lock is a heavily contended global lock. We don't want to grab
that while simultaneously holding the inode->i_lock.
Add a new per-nfs4_file lock that we can use to protect the
per-nfs4_file delegation list. Hold that while walking the list in the
break_deleg callback and queue the workqueue job for each one.
The workqueue job can then take the state_lock and do the list
manipulations without the i_lock being held prior to starting the
rpc call.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It's just an obfuscated INIT_WORK call. Just make the work_func_t a
non-static symbol and use a normal INIT_WORK call.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Note that the caller has already reserved space for count and eof, so
xdr->p has already moved past them, only the padding remains.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Fixes dc97618ddd (nfsd4: separate splice and readv cases)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit 4ac7249ea5 (nfsd: use get_acl and ->set_acl)
don't check the acl returned from get_acl()/posix_acl_from_mode().
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Rename it to better describe what it does, and have it just return the
stateid instead of a __be32 (which is now always nfs_ok). Also, do the
search for an existing stateid after the delegation check, to reduce
cleanup if the delegation check returns error.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The current enforcement of deny modes is both inefficient and scattered
across several places, which makes it hard to guarantee atomicity. The
inefficiency is a problem now, and the lack of atomicity will mean races
once the client_mutex is removed.
First, we address the inefficiency. We have to track deny modes on a
per-stateid basis to ensure that open downgrades are sane, but when the
server goes to enforce them it has to walk the entire list of stateids
and check against each one.
Instead of doing that, maintain a per-nfs4_file deny mode. When a file
is opened, we simply set any deny bits in that mode that were specified
in the OPEN call. We can then use that unified deny mode to do a simple
check to see whether there are any conflicts without needing to walk the
entire stateid list.
The only time we'll need to walk the entire list of stateids is when a
stateid that has a deny mode on it is being released, or one is having
its deny mode downgraded. In that case, we must walk the entire list and
recalculate the fi_share_deny field. Since deny modes are pretty rare
today, this should be very rare under normal workloads.
To address the potential for races once the client_mutex is removed,
protect fi_share_deny with the fi_lock. In nfs4_get_vfs_file, check to
make sure that any deny mode we want to apply won't conflict with
existing access. If that's ok, then have nfs4_file_get_access check that
new access to the file won't conflict with existing deny modes.
If that also passes, then get file access references, set the correct
access and deny bits in the stateid, and update the fi_share_deny field.
If opening the file or truncating it fails, then unwind the whole mess
and return the appropriate error.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Once we remove the client_mutex, there's an unlikely but possible race
that could occur. It will be possible for nfs4_file_put_access to race
with nfs4_file_get_access. The refcount will go to zero (briefly) and
then bumped back to one. If that happens we set ourselves up for a
use-after-free and the potential for a lock to race onto the i_flock
list as a filp is being torn down.
Ensure that we can safely bump the refcount on the file by holding the
fi_lock whenever that's done. The only place it currently isn't is in
get_lock_access.
In order to ensure atomicity with finding the file, use the
find_*_file_locked variants and then call get_lock_access to get new
access references on the nfs4_file under the same lock.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Fix the "deny" argument type, and start the loop at 1. The 0 iteration
is always a noop.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Cleanup -- ensure that the stateid bits are set at the same time that
the file access refcounts are incremented. Keeping them coherent like
this makes it easier to ensure that we account for all of the
references.
Since the initialization of the st_*_bmap fields is done when it's
hashed, we go ahead and hash the stateid before getting access to the
file and unhash it if that function returns error. This will be
necessary anyway in a follow-on patch that will overhaul deny mode
handling.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We never use anything above bit #3, so an unsigned long for each is
wasteful. Shrink them to a char each, and add some WARN_ON_ONCE calls if
we try to set or clear bits that would go outside those sizes.
Note too that because atomic bitops work on unsigned longs, we have to
abandon their use here. That shouldn't be a problem though since we
don't really care about the atomicity in this code anyway. Using them
was just a convenient way to flip bits.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...and replace it with a simple swap call.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Have them take NFS4_SHARE_ACCESS_* flags instead of an open mode. This
spares the callers from having to convert it themselves.
This also allows us to simplify these functions as we no longer need
to do the access_to_omode conversion in either one.
Note too that this patch eliminates the WARN_ON in
__nfs4_file_get_access. It's valid for now, but in a later patch we'll
be bumping the refcounts prior to opening the file in order to close
some races, at which point we'll need to remove it anyway.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Use filp_close instead of open coding. filp_close does a bit more than
just release the locks and put the filp. It also calls ->flush and
dnotify_flush, both of which should be done here anyway.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Preparation for removal of the client_mutex, which currently protects
this array. While we don't actually need the find_*_file_locked variants
just yet, a later patch will. So go ahead and add them now to reduce
future churn in this code.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Access to this list is currently serialized by the client_mutex. Add
finer grained locking around this list in preparation for its removal.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
No need to take the lock unless the count goes to 0.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Bruce says:
There's also a preexisting expire_client/laundromat vs break race:
- expire_client/laundromat adds a delegation to its local
reaplist using the same dl_recall_lru field that a delegation
uses to track its position on the recall lru and drops the
state lock.
- a concurrent break_lease adds the delegation to the lru.
- expire/client/laundromat then walks it reaplist and sees the
lru head as just another delegation on the list....
Fix this race by checking the dl_time under the state_lock. If we find
that it's not 0, then we know that it has already been queued to the LRU
list and that we shouldn't queue it again.
In the case of destroy_client, we must also ensure that we don't hit
similar races by ensuring that we don't move any delegations to the
reaplist with a dl_time of 0. Just bump the dl_time by one before we
drop the state_lock. We're destroying the delegations anyway, so a 1s
difference there won't matter.
The fault injection code also requires a bit of surgery here:
First, in the case of nfsd_forget_client_delegations, we must prevent
the same sort of race vs. the delegation break callback. For that, we
just increment the dl_time to ensure that a delegation callback can't
race in while we're working on it.
We can't do that for nfsd_recall_client_delegations, as we need to have
it actually queue the delegation, and that won't happen if we increment
the dl_time. The state lock is held over that function, so we don't need
to worry about these sorts of races there.
There is one other potential bug nfsd_recall_client_delegations though.
Entries on the victims list are not dequeued before calling
nfsd_break_one_deleg. That's a potential list corruptor, so ensure that
we do that there.
Reported-by: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit 8c7424cff6 (nfsd4: don't try to encode conflicting owner if low on space)
forgot free conf->data in nfsd4_encode_lockt and before sign conf->data to NULL
in nfsd4_encode_lock_denied.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
lookup_clientid is preferable to find_confirmed_client since it's able
to use the cached client in the compound state.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In later patches, we'll be moving the stateowner table into the
nfs4_client, and by doing this we ensure that we have a cached
nfs4_client pointer.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...and have alloc_init_open_stateowner just use the cstate->clp pointer
instead of passing in a clp separately. This allows us to use the
cached nfs4_client pointer in the cstate instead of having to look it
up again.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We want to use the nfsd4_compound_state to cache the nfs4_client in
order to optimise away extra lookups of the clid.
In the v4.0 case, we use this to ensure that we only have to look up the
client at most once per compound for each call into lookup_clientid. For
v4.1+ we set the pointer in the cstate during SEQUENCE processing so we
should never need to do a search for it.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
I saw this pop up with some pynfs testing:
[ 123.609992] nfsd: non-standard errno: -7
...and -7 is -E2BIG. I think what happened is that XFS returned -E2BIG
due to some xattr operations with the ACL10 pynfs TEST (I guess it has
limited xattr size?).
Add a better mapping for that error since it's possible that we'll need
it. How about we convert it to NFSERR_FBIG? As Bruce points out, they
both have "BIG" in the name so it must be good.
Also, turn the printk in this function into a WARN() so that we can get
a bit more information about situations that don't have proper mappings.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit 2a7420c03e504 (nfsd: Ensure that nfsd_create_setattr commits
files to stable storage), added a couple of calls to commit_metadata,
but doesn't convert their return codes to __be32 in the appropriate
places.
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The cstate already holds information about the session, and hence
the client id, so it makes more sense to pass that information
rather than the current practice of passing a 'minor version' number.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If the client were to disappear from underneath us while we're holding
a session reference, things would be bad. This cleanup helps ensure
that it cannot, which will be a possibility when the client_mutex is
removed.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Now that we know that we won't have several lockowners with the same,
owner->data, we can simplify nfsd4_release_lockowner and get rid of
the lo_list in the process.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Just like open-owners, lock-owners are associated with a name, a clientid
and, in the case of minor version 0, a sequence id. There is no association
to a file.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
A lockowner can have more than one lock stateid. For instance, if a
process has more than one file open and has locks on both, then the same
lockowner has more than one stateid associated with it. Change it so
that this reality is better reflected by the objects that nfsd uses.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In the NFSv4 spec, lock stateids are per-file objects. Lockowners are not.
This patch replaces the current list of lock owners in the open stateids
with a list of lock stateids.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Minor cleanup that should introduce no behavioral changes.
Currently this function just unhashes the stateid and leaves the caller
to do the work of the CLOSE processing.
Change nfsd4_close_open_stateid so that it handles doing all of the work
of closing a stateid. Move the handling of the unhashed stateid into it
instead of doing that work in nfsd4_close. This will help isolate some
coming changes to stateid handling from nfsd4_close.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There's no need to confirm an openowner in v4.1 and above, so we can
go ahead and set NFS4_OO_CONFIRMED when we create openowners in
those versions. This will also be necessary when we remove the
client_mutex, as it'll be possible for two concurrent opens to race
in versions >4.0.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Move the slot return, put session etc into a helper in fs/nfsd/nfs4state.c
instead of open coding in nfs4svc_encode_compoundres.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Not technically a bugfix, since nothing tries to use the return pointer
if this function doesn't return success, but it could be a problem
with some coming changes.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently, the maximum number of connections that nfsd will allow
is based on the number of threads spawned. While this is fine for a
default, there really isn't a clear relationship between the two.
The number of threads corresponds to the number of concurrent requests
that we want to allow the server to process at any given time. The
connection limit corresponds to the maximum number of clients that we
want to allow the server to handle. These are two entirely different
quantities.
Break the dependency on increasing threads in order to allow for more
connections, by adding a new per-net parameter that can be set to a
non-zero value. The default is still to base it on the number of threads,
so there should be no behavior change for anyone who doesn't use it.
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Since nfsd_create_setattr strips the mode from the struct iattr, it
is quite possible that it will optimise away the call to nfsd_setattr
altogether.
If this is the case, then we never call commit_metadata() on the
newly created file.
Also ensure that both nfsd_setattr() and nfsd_create_setattr() fail
when the call to commit_metadata fails.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit db2e747b14 (vfs: remove mode parameter from vfs_symlink())
have remove mode parameter from vfs_symlink.
So that, iattr isn't needed by nfsd_symlink now, just remove it.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Current code depends on the client_mutex to guarantee a single struct
nfs4_file per inode in the file_hashtbl and make addition atomic with
respect to lookup. Rely instead on the state_Lock, to make it easier to
stop taking the client_mutex here later.
To prevent an i_lock/state_lock inversion, change nfsd4_init_file to
use ihold instead if igrab. That's also more efficient anyway as we
definitely hold a reference to the inode at that point.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
nfsd4_process_open2 will currently will get access to the file, and then
call nfsd4_truncate to (possibly) truncate it. If that operation fails
though, then the access references will never be released as the
nfs4_ol_stateid is never initialized.
Fix by moving the nfsd4_truncate call into nfs4_get_vfs_file, ensuring
that the refcounts are properly put if the truncate fails.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
fs/nfsd/nfs4xdr.c: In function 'nfsd4_encode_readv':
>> fs/nfsd/nfs4xdr.c:3137:148: warning: comparison of distinct pointer types lacks a cast [enabled by default]
thislen = min(len, ((void *)xdr->end - (void *)xdr->p));
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Avoid an extra allocation for the tmpbuf struct itself, and stop
ignoring some allocation failures.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This is a not-that-useful kmalloc wrapper. And I'd like one of the
callers to actually use something other than kmalloc.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
28e05dd845 "knfsd: nfsd4: represent nfsv4 acl with array instead of
linked list" removed the last user that wanted a custom free function.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The name of a link is currently stored in cr_name and cr_namelen, and
the content in cr_linkname and cr_linklen. That's confusing.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently nfsd_symlink has a weird hack to serve callers who don't
null-terminate symlink data: it looks ahead at the next byte to see if
it's zero, and copies it to a new buffer to null-terminate if not.
That means callers don't have to null-terminate, but they *do* have to
ensure that the byte following the end of the data is theirs to read.
That's a bit subtle, and the NFSv4 code actually got this wrong.
So let's just throw out that code and let callers pass null-terminated
strings; we've already fixed them to do that.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It's simple enough for NFSv2 to null-terminate the symlink data.
A bit weird (it depends on knowing that we've already read the following
byte, which is either padding or part of the mode), but no worse than
the conditional kstrdup it otherwise relies on in nfsd_symlink().
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
An NFS operation that creates a new symlink includes the symlink data,
which is xdr-encoded as a length followed by the data plus 0 to 3 bytes
of zero-padding as required to reach a 4-byte boundary.
The vfs, on the other hand, wants null-terminated data.
The simple way to handle this would be by copying the data into a newly
allocated buffer with space for the final null.
The current nfsd_symlink code tries to be more clever by skipping that
step in the (likely) case where the byte following the string is already
0.
But that assumes that the byte following the string is ours to look at.
In fact, it might be the first byte of a page that we can't read, or of
some object that another task might modify.
Worse, the NFSv4 code tries to fix the problem by actually writing to
that byte.
In the NFSv2/v3 cases this actually appears to be safe:
- nfs3svc_decode_symlinkargs explicitly null-terminates the data
(after first checking its length and copying it to a new
page).
- NFSv2 limits symlinks to 1k. The buffer holding the rpc
request is always at least a page, and the link data (and
previous fields) have maximum lengths that prevent the request
from reaching the end of a page.
In the NFSv4 case the CREATE op is potentially just one part of a long
compound so can end up on the end of a page if you're unlucky.
The minimal fix here is to copy and null-terminate in the NFSv4 case.
The nfsd_symlink() interface here seems too fragile, though. It should
really either do the copy itself every time or just require a
null-terminated string.
Reported-by: Jeff Layton <jlayton@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Introduced by commit 561f0ed498 (nfsd4: allow large readdirs).
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
XDR requires 4-byte alignment; nfs4d READLINK reply writes out the padding,
but truncates the packet to the padding-less size.
Fix by taking the padding into consideration when truncating the packet.
Symptoms:
# ll /mnt/
ls: cannot read symbolic link /mnt/test: Input/output error
total 4
-rw-r--r--. 1 root root 0 Jun 14 01:21 123456
lrwxrwxrwx. 1 root root 6 Jul 2 03:33 test
drwxr-xr-x. 1 root root 0 Jul 2 23:50 tmp
drwxr-xr-x. 1 root root 60 Jul 2 23:44 tree
Signed-off-by: Avi Kivity <avi@cloudius-systems.com>
Fixes: 476a7b1f4b (nfsd4: don't treat readlink like a zero-copy operation)
Reviewed-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
An NFS operation that creates a new symlink includes the symlink data,
which is xdr-encoded as a length followed by the data plus 0 to 3 bytes
of zero-padding as required to reach a 4-byte boundary.
The vfs, on the other hand, wants null-terminated data.
The simple way to handle this would be by copying the data into a newly
allocated buffer with space for the final null.
The current nfsd_symlink code tries to be more clever by skipping that
step in the (likely) case where the byte following the string is already
0.
But that assumes that the byte following the string is ours to look at.
In fact, it might be the first byte of a page that we can't read, or of
some object that another task might modify.
Worse, the NFSv4 code tries to fix the problem by actually writing to
that byte.
In the NFSv2/v3 cases this actually appears to be safe:
- nfs3svc_decode_symlinkargs explicitly null-terminates the data
(after first checking its length and copying it to a new
page).
- NFSv2 limits symlinks to 1k. The buffer holding the rpc
request is always at least a page, and the link data (and
previous fields) have maximum lengths that prevent the request
from reaching the end of a page.
In the NFSv4 case the CREATE op is potentially just one part of a long
compound so can end up on the end of a page if you're unlucky.
The minimal fix here is to copy and null-terminate in the NFSv4 case.
The nfsd_symlink() interface here seems too fragile, though. It should
really either do the copy itself every time or just require a
null-terminated string.
Reported-by: Jeff Layton <jlayton@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently rpc_pton() fails to handle the case where you echo an address
into the file, as it barfs on the newline. Ensure that we NULL out the
first occurrence of any newline.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
AFAICT, the only way to hit this error is to pass this function a bogus
"who" value. In that case, we probably don't want to return -1 as that
could get sent back to the client. Turn this into nfserr_serverfault,
which is a more appropriate error for a server bug like this.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The filehandle structs all use host-endian values, but will sometimes
stuff big-endian values into those fields. This is OK since these
values are opaque to the client, but it confuses sparse. Add __force to
make it clear that we are doing this intentionally.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The callers expect a __be32 return and the functions they call return
__be32, so having these return int is just wrong. Also, nfsd_finish_read
can be made static.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We currently hash the XID to determine a hash bucket to use for the
reply cache entry, which is fed into hash_32 without byte-swapping it.
Add __force to make sparse happy, and add some comments to explain
why.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
sparse complains that we're stuffing non-byte-swapped values into
__be32's here. Since they're supposed to be opaque, it doesn't matter
much. Just add __force to make sparse happy.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Don't using cache_get besides export.h, using exp_get for export.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
rq_usedeferral and rq_splice_ok are used as 0 and 1, just defined to bool.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit 561f0ed498 (nfsd4: allow large readdirs) introduces a bug
about readdir the root of pseudofs.
Call xdr_truncate_encode() revert encoded name when skipping.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If nfsd needs to recall a delegation for some reason it implies that there is
contention on the file, so further delegations should not be handed out.
The current code fails to do so, and the result is effectively a
live-lock under some workloads: a client attempting a conflicting
operation on a read-delegated file receives NFS4ERR_DELAY and retries
the operation, but by the time it retries the server may already have
given out another delegation.
We could simply avoid delegations for (say) 30 seconds after any recall, but
this is probably too heavy handed.
We could keep a list of inodes (or inode numbers or filehandles) for recalled
delegations, but that requires memory allocation and searching.
The approach taken here is to use a bloom filter to record the filehandles
which are currently blocked from delegation, and to accept the cost of a few
false positives.
We have 2 bloom filters, each of which is valid for 30 seconds. When a
delegation is recalled the filehandle is added to one filter and will remain
disabled for between 30 and 60 seconds.
We keep a count of the number of filehandles that have been added, so when
that count is zero we can bypass all other tests.
The bloom filters have 256 bits and 3 hash functions. This should allow a
couple of dozen blocked filehandles with minimal false positives. If many
more filehandles are all blocked at once, behaviour will degrade towards
rejecting all delegations for between 30 and 60 seconds, then resetting and
allowing new delegations.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
27b11428b7 ("nfsd4: remove lockowner when removing lock stateid")
introduced a memory leak.
Cc: stable@vger.kernel.org
Reported-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently, the DRC cache pruner will stop scanning the list when it
hits an entry that is RC_INPROG. It's possible however for a call to
take a *very* long time. In that case, we don't want it to block other
entries from being pruned if they are expired or we need to trim the
cache to get back under the limit.
Fix the DRC cache pruner to just ignore RC_INPROG entries.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
While we're here, let's kill off a couple of the read-side macros.
Leaving the more complicated ones alone for now.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The rpc code makes available to the NFS server an array of pages to
encod into. The server represents its reply as an xdr buf, with the
head pointing into the first page in that array, the pages ** array
starting just after that, and the tail (if any) sharing any leftover
space in the page used by the head.
While encoding, we use xdr_stream->page_ptr to keep track of which page
we're currently using.
Currently we set xdr_stream->page_ptr to buf->pages, which makes the
head a weird exception to the rule that page_ptr always points to the
page we're currently encoding into. So, instead set it to buf->pages -
1 (the page actually containing the head), and remove the need for a
little unintuitive logic in xdr_get_next_encode_buffer() and
xdr_truncate_encode.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We don't want the stateid to be found in the hash table before the delegation
is granted.
Currently this is protected by the client_mutex, but we want to break that
up and this is a necessary step toward that goal.
Signed-off-by: Benny Halevy <bhalevy@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...as the name is a bit more descriptive and we've started using it for
other purposes.
Signed-off-by: Benny Halevy <bhalevy@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The memset of resp in svc_process_common should ensure that these are
already zeroed by the time they get here.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In the NFS4_OPEN_CLAIM_PREVIOUS case, we should only mark it confirmed
if the nfs4_check_open_reclaim check succeeds.
In the NFS4_OPEN_CLAIM_DELEG_PREV_FH and NFS4_OPEN_CLAIM_DELEGATE_PREV
cases, I see no point in declaring the openowner confirmed when the
operation is going to fail anyway, and doing so might allow the client
to game things such that it wouldn't need to confirm a subsequent open
with the same owner.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This fixes a bug in the handling of the fi_delegations list.
nfs4_setlease does not hold the recall_lock when adding to it. The
client_mutex is held, which prevents against concurrent list changes,
but nfsd_break_deleg_cb does not hold while walking it. New delegations
could theoretically creep onto the list while we're walking it there.
Signed-off-by: Benny Halevy <bhalevy@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The laundromat uses two variables to calculate when it should next run,
but one is completely ignored at the end of the run. Merge the two and
rename the variable to be more descriptive of what it does.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
sparse says:
CHECK fs/nfsd/nfs4xdr.c
fs/nfsd/nfs4xdr.c:2043:1: warning: symbol 'nfsd4_encode_fattr' was not declared. Should it be static?
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When debugging, rpc prints messages from dprintk(KERN_WARNING ...)
with "^A4" prefixed,
[ 2780.339988] ^A4nfsd: connect from unprivileged port: 127.0.0.1, port=35316
Trond tells,
> dprintk != printk. We have NEVER supported dprintk(KERN_WARNING...)
This patch removes using of dprintk with KERN_WARNING.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Note nobody's ever noticed because the typical client probably never
requests FILES_AVAIL without also requesting something else on the list.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
ex_nflavors can't be negative number, just defined by uint32_t.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
No need for a typedef wrapper for svc_export or svc_client, remove them.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit 49b28684fd ("nfsd: Remove deprecated nfsctl system call and
related code") removed the only use of ipv6_addr_set_v4mapped(), so
net/ipv6.h is unneeded now.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit 8f6c5ffc89 ("kernel/groups.c: remove return value of
set_groups") removed the last use of "ret".
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
After commit 4c1e1b34d5 ("nfsd: Store ex_anon_uid and ex_anon_gid as
kuids and kgids") using kuid/kgid for ex_anon_uid/ex_anon_gid,
user_namespace.h is not needed.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If fsloc_parse() failed at kzalloc(), fs/nfsd/export.c
411
412 fsloc->locations = kzalloc(fsloc->locations_count
413 * sizeof(struct nfsd4_fs_location), GFP_KERNEL);
414 if (!fsloc->locations)
415 return -ENOMEM;
svc_export_parse() will call nfsd4_fslocs_free() with fsloc->locations = NULL,
so that, "kfree(fsloc->locations[i].path);" will cause a crash.
If fsloc_parse() failed after that, fsloc_parse() will call nfsd4_fslocs_free(),
and svc_export_parse() will call it again, so that, a double free is caused.
This patch checks the fsloc->locations, and set to NULL after it be freed.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
RPC_MAX_AUTH_SIZE is scattered around several places. Better to set it
once in the auth code, where this kind of estimate should be made. And
while we're at it we can leave it zero when we're not using krb5i or
krb5p.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
And switch a couple other functions from the encode(&p,...) convention
to the p = encode(p,...) convention mostly used elsewhere.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
encode_getattr, for example, can return nfserr_resource to indicate it
ran out of buffer space. That's not a legal error in the 4.1 case.
And in the 4.1 case, if we ran out of buffer space, we should have
exceeded a session limit too.
(Note in 1bc49d83c3 "nfsd4: fix
nfs4err_resource in 4.1 case" we originally tried fixing this error
return before fixing the problem that we could error out while we still
had lots of available space. The result was to trade one illegal error
for another in those cases. We decided that was helpful, so reverted
the change in fc208d026b, and are only
reinstating it now that we've elimited almost all of those cases.)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
I'm not sure why a client would want to stuff multiple reads in a
single compound rpc, but it's legal for them to do it, and we should
really support it.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The splice and readv cases are actually quite different--for example the
former case ignores the array of vectors we build up for the latter.
It is probably clearer to separate the two cases entirely.
There's some code duplication between the split out encoders, but this
is only temporary and will be fixed by a later patch.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We currently allow only one read per compound, with operations before
and after whose responses will require no more than about a page to
encode.
While we don't expect clients to violate those limits any time soon,
this limitation isn't really condoned by the spec, so to future proof
the server we should lift the limitation.
At the same time we'd like to continue to support zero-copy reads.
Supporting multiple zero-copy-reads per compound would require a new
data structure to replace struct xdr_buf, which can represent only one
set of included pages.
So for now we plan to modify encode_read() to support either zero-copy
or non-zero-copy reads, and use some heuristics at the start of the
compound processing to decide whether a zero-copy read will work.
This will allow us to support more exotic compounds without introducing
a performance regression in the normal case.
Later patches handle those "exotic compounds", this one just makes sure
zero-copy is turned off in those cases.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We plan to use this estimate to decide whether or not to allow zero-copy
reads. Currently we're assuming all getattr's are a page, which can be
both too small (ACLs e.g. may be arbitrarily long) and too large (after
an upcoming read patch this will unnecessarily prevent zero copy reads
in any read compound also containing a getattr).
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There's no advantage to this zero-copy-style readlink encoding, and it
unnecessarily limits the kinds of compounds we can handle. (In practice
I can't see why a client would want e.g. multiple readlink calls in a
comound, but it's probably a spec violation for us not to handle it.)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
As long as we're here, let's enforce the protocol's limit on the number
of directory entries to return in a readdir.
I don't think anyone's ever noticed our lack of enforcement, but maybe
there's more of a chance they will now that we allow larger readdirs.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently we limit readdir results to a single page. This can result in
a performance regression compared to NFSv3 when reading large
directories.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Once we know the limits the session places on the size of the rpc, we
can also use that information to release any unnecessary reserved reply
buffer space.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We can simplify session limit enforcement by restricting the xdr buflen
to the session size.
Also fix a preexisting bug: we should really have been taking into
account the auth-required space when comparing against session limits,
which are limits on the size of the entire rpc reply, including any krb5
overhead.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We don't necessarily want to assume that the buflen is the same
as the number of bytes available in the pages. We may have some reason
to set it to something less (for example, later patches will use a
smaller buflen to enforce session limits).
So, calculate the buflen relative to the previous buflen instead of
recalculating it from scratch.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It will turn out to be useful to have a more accurate estimate of reply
size; so, piggyback on the existing op reply-size estimators.
Also move nfsd4_max_reply to nfs4proc.c to get easier access to struct
nfsd4_operation and friends. (Thanks to Christoph Hellwig for pointing
out that simplification.)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
I ran into this corner case in testing: in theory clients can provide
state owners up to 1024 bytes long. In the sessions case there might be
a risk of this pushing us over the DRC slot size.
The conflicting owner isn't really that important, so let's humor a
client that provides a small maxresponsize_cached by allowing ourselves
to return without the conflicting owner instead of outright failing the
operation.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Limits on maxresp_sz mean that we only ever need to replay rpc's that
are contained entirely in the head.
The one exception is very small zero-copy reads. That's an odd corner
case as clients wouldn't normally ask those to be cached.
in any case, this seems a little more robust.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
After this we can handle for example getattr of very large ACLs.
Read, readdir, readlink are still special cases with their own limits.
Also we can't handle a new operation starting close to the end of a
page.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Now that all op encoders can handle running out of space, we no longer
need to check the remaining size for every operation; only nonidempotent
operations need that check, and that can be done by
nfsd4_check_resp_size.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Once we've included page-cache pages in the encoding it's difficult to
remove them and restart encoding. (xdr_truncate_encode doesn't handle
that case.) So, make sure we'll have adequate space to finish the
operation first.
For now COMPOUND_SLACK_SPACE checks should prevent this case happening,
but we want to remove those checks.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We've tried to prevent running out of space with COMPOUND_SLACK_SPACE
and special checking in those operations (getattr) whose result can vary
enormously.
However:
- COMPOUND_SLACK_SPACE may be difficult to maintain as we add
more protocol.
- BUG_ON or page faulting on failure seems overly fragile.
- Especially in the 4.1 case, we prefer not to fail compounds
just because the returned result came *close* to session
limits. (Though perfect enforcement here may be difficult.)
- I'd prefer encoding to be uniform for all encoders instead of
having special exceptions for encoders containing, for
example, attributes.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Normally xdr encoding proceeds in a single pass from start of a buffer
to end, but sometimes we have to write a few bytes to an earlier
position.
Use write_bytes_to_xdr_buf for these cases rather than saving a pointer
to write to. We plan to rewrite xdr_reserve_space to handle encoding
across page boundaries using a scratch buffer, and don't want to risk
writing to a pointer that was contained in a scratch buffer.
Also it will no longer be safe to calculate lengths by subtracting two
pointers, so use xdr_buf offsets instead.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
xdr_reserve_space should now be calculating the length correctly as we
go, so there's no longer any need to fix it up here.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This is a cosmetic change for now; no change in behavior.
Note we're just depending on xdr_reserve_space to do the bounds checking
for us, we're not really depending on its adjustment of iovec or xdr_buf
lengths yet, as those are fixed up by as necessary after the fact by
read-link operations and by nfs4svc_encode_compoundres. However we do
have to update xdr->iov on read-like operations to prevent
xdr_reserve_space from messing with the already-fixed-up length of the
the head.
When the attribute encoding fails partway through we have to undo the
length adjustments made so far. We do it manually for now, but later
patches will add an xdr_truncate_encode() helper to handle cases like
this.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This post-encoding check should be taking into account the need to
encode at least an out-of-space error to the following op (if any).
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If nfsd4_check_resp_size() returns an error then we should really be
truncating the reply here, otherwise we may leave extra garbage at the
end of the rpc reply.
Also add a warning to catch any cases where our reply-size estimates may
be wrong in the case of a non-idempotent operation.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently if the nfs-level part of a reply would be too large, we'll
return an error to the client. But if the nfs-level part fits and
leaves no room for krb5p or krb5i stuff, then we just drop the request
entirely.
That's no good. Instead, reserve some slack space at the end of the
buffer and make sure we fail outright if we'd come close.
The slack space here is a massive overstimate of what's required, we
should probably try for a tighter limit at some point.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Just change the nfsd4_encode_getattr api. Not changing any code or
adding any new functionality yet.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This is a mechanical transformation with no change in behavior.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently a non-idempotent op reply may be cached if it fails in the
proc code but not if it fails at xdr decoding. I doubt there are any
xdr-decoding-time errors that would make this a problem in practice, so
this probably isn't a serious bug.
The space estimates should also take into account space required for
encoding of error returns. Again, not a practical problem, though it
would become one after future patches which will tighten the space
estimates.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The client is actually asking for 2532 bytes. I suspect that's a
mistake. But maybe we can allow some more. In theory lock needs more
if it might return a maximum-length lockowner in the denied case.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
OP_MODIFIES_SOMETHING flags operations that we should be careful not to
initiate without being sure we have the buffer space to encode a reply.
None of these ops fall into that category.
We could probably remove a few more, but this isn't a very important
problem at least for ops whose reply size is easy to estimate.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
PF_LESS_THROTTLE has a very specific use case: to avoid deadlocks
and live-locks while writing to the page cache in a loop-back
NFS mount situation.
It therefore makes sense to *only* set PF_LESS_THROTTLE in this
situation.
We now know when a request came from the local-host so it could be a
loop-back mount. We already know when we are handling write requests,
and when we are doing anything else.
So combine those two to allow nfsd to still be throttled (like any
other process) in every situation except when it is known to be
problematic.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ross Lagerwall