device->bytes_used will be changed when allocating a new chunk, and
disk_total_size will be changed if resizing is successful.
Meanwhile, the on-disk super blocks of the previous transaction
might not be updated. Considering the consistency of the metadata
in the previous transaction, We should use the size in the previous
transaction to check if the super block is beyond the boundary
of the device.
Though it is not big problem because we don't use it now, but anyway
it is better that we make it be consistent with the common metadata,
maybe we will use it in the future.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
total_size will be changed when resizing a device, and disk_total_size
will be changed if resizing is successful. Meanwhile, the on-disk super
blocks of the previous transaction might not be updated. Considering
the consistency of the metadata in the previous transaction, We should
use the size in the previous transaction to check if the super block is
beyond the boundary of the device. Fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
The nodesize and leafsize were never of different values. Unify the
usage and make nodesize the one. Cleanup the redundant checks and
helpers.
Shaves a few bytes from .text:
text data bss dec hex filename
852418 24560 23112 900090 dbbfa btrfs.ko.before
851074 24584 23112 898770 db6d2 btrfs.ko.after
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Truncates and renames are often used to replace old versions of a file
with new versions. Applications often expect this to be an atomic
replacement, even if they haven't done anything to make sure the new
version is fully on disk.
Btrfs has strict flushing in place to make sure that renaming over an
old file with a new file will fully flush out the new file before
allowing the transaction commit with the rename to complete.
This ordering means the commit code needs to be able to lock file pages,
and there are a few paths in the filesystem where we will try to end a
transaction with the page lock held. It's rare, but these things can
deadlock.
This patch removes the ordered flushes and switches to a best effort
filemap_flush like ext4 uses. It's not perfect, but it should fix the
deadlocks.
Signed-off-by: Chris Mason <clm@fb.com>
When starting a transaction just assert that current->journal_info
doesn't contain a send transaction stub, since send isn't supposed
to start transactions and when it finishes (either successfully or
not) it's supposed to set current->journal_info to NULL.
This is motivated by the change titled:
Btrfs: fix crash when starting transaction
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>
fcebe456 cut and pasted some code to a later point
in create_pending_snapshot(), but didn't switch
to the appropriate error handling for this stage
of the function.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Chris Mason <clm@fb.com>
Delayed extent operations are triggered during transaction commits.
The goal is to queue up a healthly batch of changes to the extent
allocation tree and run through them in bulk.
This farms them off to async helper threads. The goal is to have the
bulk of the delayed operations being done in the background, but this is
also important to limit our stack footprint.
Signed-off-by: Chris Mason <clm@fb.com>
Currently qgroups account for space by intercepting delayed ref updates to fs
trees. It does this by adding sequence numbers to delayed ref updates so that
it can figure out how the tree looked before the update so we can adjust the
counters properly. The problem with this is that it does not allow delayed refs
to be merged, so if you say are defragging an extent with 5k snapshots pointing
to it we will thrash the delayed ref lock because we need to go back and
manually merge these things together. Instead we want to process quota changes
when we know they are going to happen, like when we first allocate an extent, we
free a reference for an extent, we add new references etc. This patch
accomplishes this by only adding qgroup operations for real ref changes. We
only modify the sequence number when we need to lookup roots for bytenrs, this
reduces the amount of churn on the sequence number and allows us to merge
delayed refs as we add them most of the time. This patch encompasses a bunch of
architectural changes
1) qgroup ref operations: instead of tracking qgroup operations through the
delayed refs we simply add new ref operations whenever we notice that we need to
when we've modified the refs themselves.
2) tree mod seq: we no longer have this separation of major/minor counters.
this makes the sequence number stuff much more sane and we can remove some
locking that was needed to protect the counter.
3) delayed ref seq: we now read the tree mod seq number and use that as our
sequence. This means each new delayed ref doesn't have it's own unique sequence
number, rather whenever we go to lookup backrefs we inc the sequence number so
we can make sure to keep any new operations from screwing up our world view at
that given point. This allows us to merge delayed refs during runtime.
With all of these changes the delayed ref stuff is a little saner and the qgroup
accounting stuff no longer goes negative in some cases like it was before.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Lets try this again. We can deadlock the box if we send on a box and try to
write onto the same fs with the app that is trying to listen to the send pipe.
This is because the writer could get stuck waiting for a transaction commit
which is being blocked by the send. So fix this by making sure looking at the
commit roots is always going to be consistent. We do this by keeping track of
which roots need to have their commit roots swapped during commit, and then
taking the commit_root_sem and swapping them all at once. Then make sure we
take a read lock on the commit_root_sem in cases where we search the commit root
to make sure we're always looking at a consistent view of the commit roots.
Previously we had problems with this because we would swap a fs tree commit root
and then swap the extent tree commit root independently which would cause the
backref walking code to screw up sometimes. With this patch we no longer
deadlock and pass all the weird send/receive corner cases. Thanks,
Reportedy-by: Hugo Mills <hugo@carfax.org.uk>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
So I have an awful exercise script that will run snapshot, balance and
send/receive in parallel. This sometimes would crash spectacularly and when it
came back up the fs would be completely hosed. Turns out this is because of a
bad interaction of balance and send/receive. Send will hold onto its entire
path for the whole send, but its blocks could get relocated out from underneath
it, and because it doesn't old tree locks theres nothing to keep this from
happening. So it will go to read in a slot with an old transid, and we could
have re-allocated this block for something else and it could have a completely
different transid. But because we think it is invalid we clear uptodate and
re-read in the block. If we do this before we actually write out the new block
we could write back stale data to the fs, and boom we're screwed.
Now we definitely need to fix this disconnect between send and balance, but we
really really need to not allow ourselves to accidently read in stale data over
new data. So make sure we check if the extent buffer is not under io before
clearing uptodate, this will kick back EIO to the caller instead of reading in
stale data and keep us from corrupting the fs. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Zach found this deadlock that would happen like this
btrfs_end_transaction <- reduce trans->use_count to 0
btrfs_run_delayed_refs
btrfs_cow_block
find_free_extent
btrfs_start_transaction <- increase trans->use_count to 1
allocate chunk
btrfs_end_transaction <- decrease trans->use_count to 0
btrfs_run_delayed_refs
lock tree block we are cowing above ^^
We need to only decrease trans->use_count if it is above 1, otherwise leave it
alone. This will make nested trans be the only ones who decrease their added
ref, and will let us get rid of the trans->use_count++ hack if we have to commit
the transaction. Thanks,
cc: stable@vger.kernel.org
Reported-by: Zach Brown <zab@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Tested-by: Zach Brown <zab@redhat.com>
Signed-off-by: Chris Mason <clm@fb.com>
We needn't flush all delalloc inodes when we doesn't get s_umount lock,
or we would make the tasks wait for a long time.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
If we fail to commit transaction, we'd better
cancel scrub operations.
Suggested-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
btrfs_scrub_continue() will be called when cleaning up transaction.However,
this can only be called if btrfs_scrub_pause() is called before.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Add noinode_cache mount option for btrfs.
Since inode map cache involves all the btrfs_find_free_ino/return_ino
things and if just trigger the mount_opt,
an inode number get from inode map cache will not returned to inode map
cache.
To keep the find and return inode both in the same behavior,
a new bit in mount_opt, CHANGE_INODE_CACHE, is introduced for this idea.
CHANGE_INODE_CACHE is set/cleared in remounting, and the original
INODE_MAP_CACHE is set/cleared according to CHANGE_INODE_CACHE after a
success transaction.
Since find/return inode is all done between btrfs_start_transaction and
btrfs_commit_transaction, this will keep consistent behavior.
Also noinode_cache mount option will not stop the caching_kthread.
Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
On one of our gluster clusters we noticed some pretty big lag spikes. This
turned out to be because our transaction commit was taking like 3 minutes to
complete. This is because we have like 30 gigs of metadata, so our global
reserve would end up being the max which is like 512 mb. So our throttling code
would allow a ridiculous amount of delayed refs to build up and then they'd all
get run at transaction commit time, and for a cold mounted file system that
could take up to 3 minutes to run. So fix the throttling to be based on both
the size of the global reserve and how long it takes us to run delayed refs.
This patch tracks the time it takes to run delayed refs and then only allows 1
seconds worth of outstanding delayed refs at a time. This way it will auto-tune
itself from cold cache up to when everything is in memory and it no longer has
to go to disk. This makes our transaction commits take much less time to run.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Currently we have two rb-trees, one for delayed ref heads and one for all of the
delayed refs, including the delayed ref heads. When we process the delayed refs
we have to hold onto the delayed ref lock for all of the selecting and merging
and such, which results in quite a bit of lock contention. This was solved by
having a waitqueue and only one flusher at a time, however this hurts if we get
a lot of delayed refs queued up.
So instead just have an rb tree for the delayed ref heads, and then attach the
delayed ref updates to an rb tree that is per delayed ref head. Then we only
need to take the delayed ref lock when adding new delayed refs and when
selecting a delayed ref head to process, all the rest of the time we deal with a
per delayed ref head lock which will be much less contentious.
The locking rules for this get a little more complicated since we have to lock
up to 3 things to properly process delayed refs, but I will address that problem
later. For now this passes all of xfstests and my overnight stress tests.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Looking into some performance related issues with large amounts of metadata
revealed that we can have some pretty huge swings in fsync() performance. If we
have a lot of delayed refs backed up (as you will tend to do with lots of
metadata) fsync() will wander off and try to run some of those delayed refs
which can result in reading from disk and such. Since the actual act of fsync()
doesn't create any delayed refs there is no need to make it throttle on delayed
ref stuff, that will be handled by other people. With this patch we get much
smoother fsync performance with large amounts of metadata. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
We should gurantee that parent and clone roots can not be destroyed
during send, for this we have two ideas.
1.by holding @subvol_sem, this might be a nightmare, because it will
block all subvolumes deletion for a long time.
2.Miao pointed out we can reuse @send_in_progress, that mean we will
skip snapshot deletion if root sending is in progress.
Here we adopt the second approach since it won't block other subvolumes
deletion for a long time.
Besides in btrfs_clean_one_deleted_snapshot(), we only check first root
, if this root is involved in send, we return directly rather than
continue to check.There are several reasons about it:
1.this case happen seldomly.
2.after sending,cleaner thread can continue to drop that root.
3.make code simple
Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Two reasons:
- btrfs_end_transaction_dmeta() is the same as btrfs_end_transaction_throttle()
so it is unnecessary.
- All the delayed items should be dealt in the current transaction, so the
workers should not commit the transaction, instead, deal with the delayed
items as many as possible.
So we can remove btrfs_end_transaction_dmeta()
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Convert all applicable cases of printk and pr_* to the btrfs_* macros.
Fix all uses of the BTRFS prefix.
Signed-off-by: Frank Holton <fholton@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Just wrap same code into one function scrub_blocked_if_needed().
This make a change that we will move waiting (@workers_pending = 0)
before we can wake up commiting transaction(atomic_inc(@scrub_paused)),
we must take carefully to not deadlock here.
Thread 1 Thread 2
|->btrfs_commit_transaction()
|->set trans type(COMMIT_DOING)
|->btrfs_scrub_paused()(blocked)
|->join_transaction(blocked)
Move btrfs_scrub_paused() before setting trans type which means we can
still join a transaction when commiting_transaction is blocked.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Suggested-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
The way how we process delayed refs is
1) get a bunch of head refs,
2) pick up one head ref,
3) go one node back for any delayed ref updates.
The head ref is also linked in the same rbtree as the delayed ref is,
so in 1) stage, we have to walk one by one including not only head refs, but
delayed refs.
When we have a great number of delayed refs pending to process,
this'll cost time a lot.
Here we introduce a head ref specific rbtree, it only has head refs, so troubles
go away.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
Lockdep complains about btrfs's async commit:
[ 2372.462171] [ BUG: bad unlock balance detected! ]
[ 2372.462191] 3.12.0+ #32 Tainted: G W
[ 2372.462209] -------------------------------------
[ 2372.462228] ceph-osd/14048 is trying to release lock (sb_internal) at:
[ 2372.462275] [<ffffffffa022cb10>] btrfs_commit_transaction_async+0x1b0/0x2a0 [btrfs]
[ 2372.462305] but there are no more locks to release!
[ 2372.462324]
[ 2372.462324] other info that might help us debug this:
[ 2372.462349] no locks held by ceph-osd/14048.
[ 2372.462367]
[ 2372.462367] stack backtrace:
[ 2372.462386] CPU: 2 PID: 14048 Comm: ceph-osd Tainted: G W 3.12.0+ #32
[ 2372.462414] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080015 11/09/2011
[ 2372.462455] ffffffffa022cb10 ffff88007490fd28 ffffffff816f094a ffff8800378aa320
[ 2372.462491] ffff88007490fd50 ffffffff810adf4c ffff8800378aa320 ffff88009af97650
[ 2372.462526] ffffffffa022cb10 ffff88007490fd88 ffffffff810b01ee ffff8800898c0000
[ 2372.462562] Call Trace:
[ 2372.462584] [<ffffffffa022cb10>] ? btrfs_commit_transaction_async+0x1b0/0x2a0 [btrfs]
[ 2372.462619] [<ffffffff816f094a>] dump_stack+0x45/0x56
[ 2372.462642] [<ffffffff810adf4c>] print_unlock_imbalance_bug+0xec/0x100
[ 2372.462677] [<ffffffffa022cb10>] ? btrfs_commit_transaction_async+0x1b0/0x2a0 [btrfs]
[ 2372.462710] [<ffffffff810b01ee>] lock_release+0x18e/0x210
[ 2372.462742] [<ffffffffa022cb36>] btrfs_commit_transaction_async+0x1d6/0x2a0 [btrfs]
[ 2372.462783] [<ffffffffa025a7ce>] btrfs_ioctl_start_sync+0x3e/0xc0 [btrfs]
[ 2372.462822] [<ffffffffa025f1d3>] btrfs_ioctl+0x4c3/0x1f70 [btrfs]
[ 2372.462849] [<ffffffff812c0321>] ? avc_has_perm+0x121/0x1b0
[ 2372.462873] [<ffffffff812c0224>] ? avc_has_perm+0x24/0x1b0
[ 2372.462897] [<ffffffff8107ecc8>] ? sched_clock_cpu+0xa8/0x100
[ 2372.462922] [<ffffffff8117b145>] do_vfs_ioctl+0x2e5/0x4e0
[ 2372.462946] [<ffffffff812c19e6>] ? file_has_perm+0x86/0xa0
[ 2372.462969] [<ffffffff8117b3c1>] SyS_ioctl+0x81/0xa0
[ 2372.462991] [<ffffffff817045a4>] tracesys+0xdd/0xe2
====================================================
It's because that we don't do the right thing when checking if it's ok to
tell lockdep that we're trying to release the rwsem.
If the trans handle's type is TRANS_ATTACH, we won't acquire the freeze rwsem, but
as TRANS_ATTACH fits the check (trans < TRANS_JOIN_NOLOCK), we'll release the freeze
rwsem, which makes lockdep complains a lot.
Reported-by: Ma Jianpeng <majianpeng@gmail.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
rename the function -- btrfs_start_all_delalloc_inodes(), and make its
name be compatible to btrfs_wait_ordered_roots(), since they are always
used at the same place.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
It is very likely that there are lots of ordered extents in the filesytem,
if we wait for the completion of all of them when we want to reclaim some
space for the metadata space reservation, we would be blocked for a long
time. The performance would drop down suddenly for a long time.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
When we did space balance and snapshot creation at the same time, we might
meet the following oops:
kernel BUG at fs/btrfs/inode.c:3038!
[SNIP]
Call Trace:
[<ffffffffa0411ec7>] btrfs_orphan_cleanup+0x293/0x407 [btrfs]
[<ffffffffa042dc45>] btrfs_mksubvol.isra.28+0x259/0x373 [btrfs]
[<ffffffffa042de85>] btrfs_ioctl_snap_create_transid+0x126/0x156 [btrfs]
[<ffffffffa042dff1>] btrfs_ioctl_snap_create_v2+0xd0/0x121 [btrfs]
[<ffffffffa0430b2c>] btrfs_ioctl+0x414/0x1854 [btrfs]
[<ffffffff813b60b7>] ? __do_page_fault+0x305/0x379
[<ffffffff811215a9>] vfs_ioctl+0x1d/0x39
[<ffffffff81121d7c>] do_vfs_ioctl+0x32d/0x3e2
[<ffffffff81057fe7>] ? finish_task_switch+0x80/0xb8
[<ffffffff81121e88>] SyS_ioctl+0x57/0x83
[<ffffffff813b39ff>] ? do_device_not_available+0x12/0x14
[<ffffffff813b99c2>] system_call_fastpath+0x16/0x1b
[SNIP]
RIP [<ffffffffa040da40>] btrfs_orphan_add+0xc3/0x126 [btrfs]
The reason of the problem is that the relocation root creation stole
the reserved space, which was reserved for orphan item deletion.
There are several ways to fix this problem, one is to increasing
the reserved space size of the space balace, and then we can use
that space to create the relocation tree for each fs/file trees.
But it is hard to calculate the suitable size because we doesn't
know how many fs/file trees we need relocate.
We fixed this problem by reserving the space for relocation root creation
actively since the space it need is very small (one tree block, used for
root node copy), then we use that reserved space to create the
relocation tree. If we don't reserve space for relocation tree creation,
we will use the reserved space of the balance.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
I was noticing the slab redzone stuff going off every once and a while during
transaction aborts. This was caused by two things
1) We would walk the pending snapshots and set their error to -ECANCELED. We
don't need to do this, the snapshot stuff waits for a transaction commit and if
there is a problem we just free our pending snapshot object and exit. Doing
this was causing us to touch the pending snapshot object after the thing had
already been freed.
2) We were freeing the transaction manually with wanton disregard for it's
use_count reference counter. To fix this I cleaned up the transaction freeing
loop to either wait for the transaction commit to finish if it was in the middle
of that (since it will be cleaned and freed up there) or to do the cleanup
oursevles.
I also moved the global "kill all things dirty everywhere" stuff outside of the
transaction cleanup loop since that only needs to be done once. With this patch
I'm no longer seeing slab corruption because of use after frees. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Noticed this when forcing errors to happen during delayed ref running. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
If we abort not during a transaction commit we won't clean up anything until we
unmount. Unfortunately if we abort in the middle of writing out an ordered
extent we won't clean it up and if somebody is waiting on that ordered extent
they will wait forever. To fix this just make the transaction kthread call the
cleanup transaction stuff if it notices theres an error, and make
btrfs_end_transaction wake up the transaction kthread if there is an error.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
If we abort a transaction in the middle of a commit we weren't undoing the
intwrite locking. This patch fixes that problem.
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
If we crash with a log, remount and recover that log, and then crash before we
can commit another transaction we will get transid verify errors on the next
mount. This is because we were not zero'ing out the log when we committed the
transaction after recovery. This is ok as long as we commit another transaction
at some point in the future, but if you abort or something else goes wrong you
can end up in this weird state because the recovery stuff says that the tree log
should have a generation+1 of the super generation, which won't be the case of
the transaction that was started for recovery. Fix this by removing the check
and _always_ zero out the log portion of the super when we commit a transaction.
This fixes the transid verify issues I was seeing with my force errors tests.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
This is a left over of how we used to wait for ordered extents, which was to
grab the inode and then run filemap flush on it. However if we have an ordered
extent then we already are holding a ref on the inode, and we just use
btrfs_start_ordered_extent anyway, so there is no reason to have an extra ref on
the inode to start work on the ordered extent. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
u64 is "unsigned long long" on all architectures now, so there's no need to
cast it when formatting it using the "ll" length modifier.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
If the filesystem was mounted with an old kernel that was not
aware of the UUID tree, this is detected by looking at the
uuid_tree_generation field of the superblock (similar to how
the free space cache is doing it). If a mismatch is detected
at mount time, a thread is started that does two things:
1. Iterate through the UUID tree, check each entry, delete those
entries that are not valid anymore (i.e., the subvol does not
exist anymore or the value changed).
2. Iterate through the root tree, for each found subvolume, add
the UUID tree entries for the subvolume (if they are not
already there).
This mechanism is also used to handle and repair errors that
happened during the initial creation and filling of the tree.
The update of the uuid_tree_generation field (which indicates
that the state of the UUID tree is up to date) is blocked until
all create and repair operations are successfully completed.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
In order to be able to detect the case that a filesystem is mounted
with an old kernel, add a uuid-tree-gen field like the free space
cache is doing it. It is part of the super block and written with
each commit. Old kernels do not know this field and don't update it.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
When a new subvolume or snapshot is created, a new UUID item is added
to the UUID tree. Such items are removed when the subvolume is deleted.
The ioctl to set the received subvolume UUID is also touched and will
now also add this received UUID into the UUID tree together with the
ID of the subvolume. The latter is also done when read-only snapshots
are created which inherit all the send/receive information from the
parent subvolume.
User mode programs use the BTRFS_IOC_TREE_SEARCH ioctl to search and
read in the UUID tree.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Cc: Josef Bacik <jbacik@fusionio.com>
Cc: Chris Mason <chris.mason@fusionio.com>
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
There is no reason for this sort of jackassery. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Some codes still use the cpu_to_lexx instead of the
BTRFS_SETGET_STACK_FUNCS declared in ctree.h.
Also added some BTRFS_SETGET_STACK_FUNCS for btrfs_header btrfs_timespec
and other structures.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Miao Xie <miaoxie@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
A user reported a panic when running with autodefrag and deleting snapshots.
This is because we could end up trying to add the root to the dead roots list
twice. To fix this check to see if we are empty before adding ourselves to the
dead roots list. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
When adjusting the enospc rules for relocation I ran into a deadlock because we
were relocating the only system chunk and that forced us to try and allocate a
new system chunk while holding locks in the chunk tree, which caused us to
deadlock. To fix this I've moved all of the dev extent addition and chunk
addition out to the delayed chunk completion stuff. We still keep the in-memory
stuff which makes sure everything is consistent.
One change I had to make was to search the commit root of the device tree to
find a free dev extent, and hold onto any chunk em's that we allocated in that
transaction so we do not allocate the same dev extent twice. This has the side
effect of fixing a bug with balance that has been there ever since balance
existed. Basically you can free a block group and it's dev extent and then
immediately allocate that dev extent for a new block group and write stuff to
that dev extent, all within the same transaction. So if you happen to crash
during a balance you could come back to a completely broken file system. This
patch should keep these sort of things from happening in the future since we
won't be able to allocate free'd dev extents until after the transaction
commits. This has passed all of the xfstests and my super annoying stress test
followed by a balance. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
The comment is for btrfs_attach_transaction_barrier, not for
btrfs_attach_transaction. Fix the typo.
Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Acked-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Miao Xie