Commit Graph

116 Commits

Author SHA1 Message Date
Suzuki K Poulose 5014e90468 coresight: Handle build path error
Enabling a component via sysfs (echo 1 > enable_source), would
trigger building a path from the enabled sources to the sink.
If there is an error in the process (e.g, sink not enabled or
the device (CPU corresponding to ETM) is not online), we never report
failure, except for leaving a message in the dmesg.

Do proper error checking for the build path and return the error.

Before:
 $ echo 0 > /sys/devices/system/cpu/cpu2/online
 $ echo 1 > /sys/devices/cs_etm/cpu2/enable_source
 $ echo $?
 0

After:
 $ echo 0 > /sys/devices/system/cpu/cpu2/online
 $ echo 1 > /sys/devices/cs_etm/cpu2/enable_source
 -bash: echo: write error: No such device or address

Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-16 00:13:06 -07:00
Suzuki K Poulose f3b8172fe1 coresight: Fix erroneous memset in tmc_read_unprepare_etr
At the end of a trace collection, we try to clear the entire buffer
and enable the ETR back if it was already enabled. But, we would have
adjusted the drvdata->buf to point to the beginning of the trace data
in the trace buffer @drvdata->vaddr. So, the following code which
clears the buffer is dangerous and can cause crashes, like below :

	memset(drvdata->buf, 0, drvdata->size);

 Unable to handle kernel paging request at virtual address ffffff800a145000
 pgd = ffffffc974726000
 *pgd=00000009f3e91003, *pud=00000009f3e91003, *pmd=0000000000000000
 PREEMPT SMP
 Modules linked in:
 CPU: 4 PID: 1692 Comm: dd Not tainted 4.7.0-rc2+ #1721
 Hardware name: ARM Juno development board (r0) (DT)
 task: ffffffc9734a0080 ti: ffffffc974460000 task.ti: ffffffc974460000
 PC is at __memset+0x1ac/0x200
 LR is at tmc_read_unprepare_etr+0x144/0x1bc
 pc : [<ffffff80083a05ac>] lr : [<ffffff800859c984>] pstate: 200001c5
 ...
 [<ffffff80083a05ac>] __memset+0x1ac/0x200
 [<ffffff800859b2e4>] tmc_release+0x90/0x94
 [<ffffff8008202f58>] __fput+0xa8/0x1ec
 [<ffffff80082030f4>] ____fput+0xc/0x14
 [<ffffff80080c3ef8>] task_work_run+0xb0/0xe4
 [<ffffff8008088bf4>] do_notify_resume+0x64/0x6c
 [<ffffff8008084d5c>] work_pending+0x10/0x14
 Code: 91010108 54ffff4a 8b040108 cb050042 (d50b7428)

Since we clear the buffer anyway in the following call to
tmc_etr_enable_hw(), remove the erroneous memset().

Fixes: commit de5461970b ("coresight: tmc: allocating memory when needed")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-16 00:13:06 -07:00
Suzuki K Poulose 8e215298a1 coresight: Fix tmc_read_unprepare_etr
At the end of the trace capture, we free the allocated memory,
resetting the drvdata->buf to NULL, to indicate that trace data
was collected and the next trace session should allocate the
memory in tmc_enable_etr_sink_sysfs.

The tmc_enable_etr_sink_sysfs, we only allocate memory if drvdata->vaddr
is not NULL (which is not performed at the end of previous session).
This can cause, drvdata->vaddr getting assigned NULL and later we do
memset() which causes a crash as below :

Unable to handle kernel NULL pointer dereference at virtual
 address  00000000
pgd = ffffffc9747f0000
[00000000] *pgd=00000009f402e003, *pud=00000009f402e003,
 *pmd=0000000000000000
Internal error: Oops: 96000046 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 1592 Comm: bash Not tainted 4.7.0-rc1+ #1712
Hardware name: ARM Juno development board (r0) (DT)
task: ffffffc078fe0080 ti: ffffffc974178000 task.ti: ffffffc974178000
PC is at __memset+0x1ac/0x200
LR is at tmc_enable_etr_sink+0xf8/0x304
pc : [<ffffff80083a002c>] lr : [<ffffff800859be44>] pstate: 400001c5
sp : ffffffc97417bc00
x29: ffffffc97417bc00 x28: ffffffc974178000

Call trace:
Exception stack(0xffffffc97417ba40 to 0xffffffc97417bb60)
ba40: 0000000000000001 ffffffc974a5d098 ffffffc97417bc00 ffffff80083a002c
ba60: ffffffc974a5d118 0000000000000000 0000000000000000 0000000000000000
ba80: 0000000000000001 0000000000000000 ffffff800859bdec 0000000000000040
baa0: ffffff8008b45b58 00000000000001c0 ffffffc97417baf0 ffffff80080eddb4
bac0: 0000000000000003 ffffffc078fe0080 ffffffc078fe0960 ffffffc078fe0940
bae0: 0000000000000000 0000000000000000 00000000007fffc0 0000000000000004
bb00: 0000000000000000 0000000000000040 000000000000003f 0000000000000000
bb20: 0000000000000000 0000000000000000 0000000000000000 0000000000000001
bb40: ffffffc078fe0960 0000000000000018 ffffffffffffffff 0008669628000000
[<ffffff80083a002c>] __memset+0x1ac/0x200
[<ffffff8008599814>] coresight_enable_path+0xa8/0x1dc
[<ffffff8008599b10>] coresight_enable+0x88/0x1b8
[<ffffff8008599d88>] enable_source_store+0x3c/0x6c
[<ffffff800845eaf4>] dev_attr_store+0x18/0x28
[<ffffff80082829e8>] sysfs_kf_write+0x54/0x64
[<ffffff8008281c30>] kernfs_fop_write+0x148/0x1d8
[<ffffff8008200128>] __vfs_write+0x28/0x110
[<ffffff8008200e88>] vfs_write+0xa0/0x198
[<ffffff80082021b0>] SyS_write+0x44/0xa0
[<ffffff8008084e70>] el0_svc_naked+0x24/0x28
Code: 91010108 54ffff4a 8b040108 cb050042 (d50b7428)

This patch fixes the issue by clearing the drvdata->vaddr while we free
the allocated buffer at the end of a session, so that we allocate the
memory again.

Cc: mathieu.poirier@linaro.org
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-16 00:13:06 -07:00
Suzuki K Poulose ec48a1d981 coresight: Fix NULL pointer dereference in _coresight_build_path
_coresight_build_path assumes that all the connections of a csdev
has the child_dev initialised. This may not be true if the particular
component is not supported by the kernel config(e.g TPIU) but is
present in the DT. In which case, building a path can cause a crash like this :

  Unable to handle kernel NULL pointer dereference at virtual address 00000010
  pgd = ffffffc9750dd000
  [00000010] *pgd=00000009f5e90003, *pud=00000009f5e90003, *pmd=0000000000000000
  Internal error: Oops: 96000006 [#1] PREEMPT SMP
  Modules linked in:
  CPU: 4 PID: 1348 Comm: bash Not tainted 4.6.0-next-20160517 #1646
  Hardware name: ARM Juno development board (r0) (DT)
  task: ffffffc97517a280 ti: ffffffc9762c4000 task.ti: ffffffc9762c4000
  PC is at _coresight_build_path+0x18/0xe4
  LR is at _coresight_build_path+0xc0/0xe4
  pc : [<ffffff80083d5130>] lr : [<ffffff80083d51d8>] pstate: 20000145
  sp : ffffffc9762c7ba0

  [<ffffff80083d5130>] _coresight_build_path+0x18/0xe4
  [<ffffff80083d51d8>] _coresight_build_path+0xc0/0xe4
  [<ffffff80083d51d8>] _coresight_build_path+0xc0/0xe4
  [<ffffff80083d51d8>] _coresight_build_path+0xc0/0xe4
  [<ffffff80083d51d8>] _coresight_build_path+0xc0/0xe4
  [<ffffff80083d51d8>] _coresight_build_path+0xc0/0xe4
  [<ffffff80083d5cdc>] coresight_build_path+0x40/0x68
  [<ffffff80083d5e14>] coresight_enable+0x74/0x1bc
  [<ffffff80083d60a0>] enable_source_store+0x3c/0x6c
  [<ffffff800830b17c>] dev_attr_store+0x18/0x28
  [<ffffff80081ca9c4>] sysfs_kf_write+0x40/0x50
  [<ffffff80081c9e38>] kernfs_fop_write+0x140/0x1cc
  [<ffffff8008163ec8>] __vfs_write+0x28/0x110
  [<ffffff8008164bf0>] vfs_write+0xa0/0x174
  [<ffffff8008165d18>] SyS_write+0x44/0xa0
  [<ffffff8008084e70>] el0_svc_naked+0x24/0x28

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-16 00:13:06 -07:00
Mathieu Poirier bedffda8ca coresight: etb10: adjust read pointer only when needed
The read pointer (read_ptr) needs to be adjusted only if its value
has gone beyond the length of the memory buffer.

Reported-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-03 14:59:30 -07:00
Mathieu Poirier dc2c4ef141 coresight: configuring ETF in FIFO mode when acting as link
When part of a path but not identified as a sink, the EFT has to
be configured as a link and placed in HW FIFO mode.  As such when
enabling a path, call the right configuration function based on
the role the ETF if playing in this trace run.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-03 14:59:30 -07:00
Mathieu Poirier 2e499bbc1a coresight: tmc: implementing TMC-ETF AUX space API
This patch implement the AUX area interfaces required to
use the TMC (configured as an ETF) from the Perf sub-system.

The heuristic is heavily borrowed from the ETB10 implementation.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-03 14:59:30 -07:00
Mathieu Poirier a02e81f7a3 coresight: moving struct cs_buffers to header file
That way we can re-use the structure in other drivers.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-03 14:59:30 -07:00
Mathieu Poirier 4f1ff3de92 coresight: tmc: keep track of memory width
Accessing the HW configuration register each time the memory
width is needed simply doesn't make sense.  It is much more
efficient to read the value once and keep a reference for
later use.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-03 14:59:30 -07:00
Mathieu Poirier b217601e9a coresight: tmc: make sysFS and Perf mode mutually exclusive
The sysFS and Perf access methods can't be allowed to interfere
with one another.  As such introducing guards to access
functions that prevents moving forward if a TMC is already
being used.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-03 14:59:30 -07:00
Mathieu Poirier a40318fb01 coresight: tmc: dump system memory content only when needed
Calling tmc_etf/etr_dump_hw() is required only when operating from
sysFS.  When working from Perf, the system memory is harvested
from the AUX trace API.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-03 14:59:30 -07:00
Mathieu Poirier f2facc3366 coresight: tmc: adding mode of operation for link/sinks
Moving tmc_drvdata::enable to a local_t mode.  That way the
sink interface is aware of it's orgin and the foundation for
mutual exclusion between the sysFS and Perf interface can be
laid out.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-03 14:59:30 -07:00
Mathieu Poirier f74debbea0 coresight: tmc: getting rid of multiple read access
Allowing multiple readers to access the trace data simultaniously
via sysFS provides no shortage of opportunity for race condition,
mandates two variable to be maintained (drvdata::read_count and
drvdata::reading), makes the code complex and provide little
advantages, if any.

This patch streamlines the read process by restricting trace data
access to a single user.  That way drvdata::read_count can
be eliminated and race conditions (along with faulty error handling)
in function tmc_open() and tmc_release() eliminated.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-03 14:59:30 -07:00
Mathieu Poirier de5461970b coresight: tmc: allocating memory when needed
In it's current form the TMC probe() function allocates
trace buffer memory at boot time, event if coresight isn't
used.  This is highly inefficient since trace buffers can
occupy a lot of memory that could be used otherwised.

This patch allocates trace buffers on the fly, when the
coresight subsystem is solicited.  Allocated buffers are
released when traces are read using the device descriptors
under /dev.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-03 14:59:30 -07:00
Mathieu Poirier 4525412a50 coresight: tmc: making prepare/unprepare functions generic
Dealing with HW related matters in tmc_read_prepare/unprepare
becomes convoluted when many cases need to be handled distinctively.

As such moving processing related to HW setup to individual driver
files and keep the core driver generic.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-03 14:59:30 -07:00
Mathieu Poirier 6c6ed1e244 coresight: tmc: splitting driver in ETB/ETF and ETR components
The TMC block can operate in 3 modes (ETB, ETF and ETR) and accessed
via two interfaces (sysFS and Perf).  That makes 6 mode to cover, which
is way too much coupling for a single file.

This patch splits the original TMC driver in 2 halves, one for ETB/ETF
and another one for ETR mode.  A common core is kept for functionality
common to all 3 modes.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-03 14:59:30 -07:00
Mathieu Poirier a8ab4268e0 coresight: tmc: cleaning up header file
This patch first move the TMC_STS_TMCREADY_BIT and
TMC_FFCR_FLUSHMAN_BIT defines to their respective section.
It also removes TMC_FFCR_FLUSHMAN, since the same result
can easily be obtained using the BIT() macro.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-03 14:59:30 -07:00
Mathieu Poirier 4c324b5f0e coresight: tmc: introducing new header file
The amount of #define, enumeration and structure definition
is big enough to justify moving them to a new header file.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-03 14:59:30 -07:00
Mathieu Poirier ebba56e7b2 coresight: tmc: clearly define number of transfers per burst
This patch makes the name of the define reflect the amount of
data tranfers per burst, in this case 16.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-03 14:59:30 -07:00
Mathieu Poirier b1789b793e coresight: tmc: re-implementing tmc_read_prepare/unprepare() functions
In their current implementation the tmc_read_prepare/unprepare()
are a lump of if/else that is difficult to read.  This patch is
alleviating that by using a switch statement.  The latter also
allows for a better control on the error path.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-03 14:59:30 -07:00
Mathieu Poirier 358f42184e coresight: tmc: waiting for TMCReady bit before programming
According to the TRM before programming the TMC in circular
buffer mode (and that for any configuration, ETB, ETR, ETF),
the TMCReady bit in the status register has to be set.

This patch adds a check to make sure the state machine is in
a state where it can be configured, and complains otherwise.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-03 14:59:30 -07:00
Mathieu Poirier 580ff804ec coresight: tmc: modifying naming convention
According to the TMC architectural state machine, the 'stopped'
state is reached when bit 2 (TMCReady) of the TMC Status register
turns to '1'.  The code is correct but the naming convention isn't.

The 'Triggered' bit occupies position '1' of the TMC Status register
and has nothing to do with the indication of the TMC entering the
stopped state. As such renaming function "tmc_wait_for_triggered()"
and changing the #define to reflect what the code is really doing.

This patch has no effect other than clarifying the semantic.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-03 14:59:30 -07:00
Mathieu Poirier 7d83d17795 coresight: tmc: adding sysFS management entries
Adding management registers that convey implementation
specific characteristics.  Those are useful for trace
configuration and collection along with general trouble
shooting.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-03 14:59:30 -07:00
Li Pengcheng 960e309599 coresight: etm4x: add tracer ID for A72 Maia processor.
This patch adds a cellID for the ETMv4 tracer found on
HiSillicon's A72 Maia processor.

Signed-off-by: Li Pengcheng <lipengcheng8@huawei.com>
Signed-off-by: Li Zhong <lizhong11@hisilicon.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-03 14:59:30 -07:00
Mathieu Poirier b5af0a26da coresight: etb10: fixing the right amount of words to read
This patch rectifies the amount of words to read when the internal
buffer is deemed bigger than the amount of space available in the
perf ring buffer.

The amount to read is set to the amount of space in the perf ring
buffer rather than being subtracted by it.

Reported-by: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-03 14:59:30 -07:00
Pratik Patel 237483aa5c coresight: stm: adding driver for CoreSight STM component
This driver adds support for the STM CoreSight IP block, allowing any
system compoment (HW or SW) to log and aggregate messages via a
single entity.

The CoreSight STM exposes an application defined number of channels
called stimulus port.  Configuration is done using entries in sysfs
and channels made available to userspace via configfs.

Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Michael Williams <michael.williams@arm.com>
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-03 14:59:30 -07:00
Mathieu Poirier a685d68328 coresight: adding path for STM device
>From a core framework point of view an STM device is a source that is
treated the same way as any other tracers.  Unlike tracers though STM
devices are not associated with a CPU.  As such it doesn't make sense
to associate the path from an STM device to its sink with a per-cpu
variable as it is done for tracers.

This patch simply adds another global variable to keep STM paths and the
processing in coresight_enable/disable() is updated to deal with STM
devices properly.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-03 14:59:30 -07:00
Li Pengcheng 6327a454a8 coresight: etm4x: modify q_support type
Because this operation exceed the range of boolean,
so we should modify q_support to unit8 bit.
drvdata->q_support = BMVAL(etmidr0, 15, 16)

Signed-off-by: Li Pengcheng <lipengcheng8@huawei.com>
Signed-off-by: Li Zhong <lizhong11@hisilicon.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-03 14:59:30 -07:00
Li Pengcheng e8dc27d0ee coresight: no need to do the forced type conversion
activated and enable are already unsigned type,
no need to change them to unsigned.

Signed-off-by: Li Pengcheng <lipengcheng8@huawei.com>
Signed-off-by: Li Zhong <lizhong11@hisilicon.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-03 14:59:30 -07:00
Mathieu Poirier ef0fd640e3 coresight: removing gratuitous boot time log messages
Removing boot time log for drivers that don't report useful information
other than they came up properly.  The same information can be found in
sysFS once the system has booted and as such doesn't provide any value
in the boot log.

Reported-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-01 14:12:14 -07:00
Mathieu Poirier ad352acbb9 coresight: etb10: splitting sysFS "status" entry
The sysFS "status" entry conveys a wealth of information about
the status of the HW but goes agains the sysFS rule of one topic
per file.

This patch rectify the situation by adding read-only entries for
each of the field formaly displayed by "status".  The ABI
documentation is kept up to date.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-01 14:12:14 -07:00
Mathieu Poirier 154f3520fe coresight: moving coresight_simple_func() to header file
Macro "coresight_simple_func()" can be used by several drivers.
As such making the structure type generic and moving to a
globally available header file.  That way individual drivers
can use the functionality by simply specifying the structure
they need to work with.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-01 14:12:14 -07:00
Mathieu Poirier 37fbbdbde9 coresight: etm4x: implementing the perf PMU API
Adding a set of API allowing the Perf core to treat ETMv4
tracers like other PMUs.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-01 14:12:14 -07:00
Mathieu Poirier 4f6fce5452 coresight: etm4x: implementing user/kernel mode tracing
Adding new mode to limit tracing to kernel or user space.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-01 14:12:14 -07:00
Mathieu Poirier c38a9ec2b2 coresight: etm4x: moving etm_drvdata::enable to atomic field
Similarly to ETMv3, moving etmv4_drvdata::enable to an atomic
type that gives the 'mode' of a tracer and prevents multiple,
simultanious access by different subsystems.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-01 14:12:14 -07:00
Mathieu Poirier 66bbbb7754 coresight: etm4x: unlocking tracers in default arch init
As with the ETMv3.x driver, calling 'smp_call_function_single()'
twice in a row is highly ineffective.  As such moving function
'etm4_os_unlock()' before the default initialisation takes
place, which results in the same outcome.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-01 14:12:14 -07:00
Mathieu Poirier fc208abef3 coresight: etm4x: splitting etmv4 default configuration
Splitting and updating the default initialisation for each etmv4
configuration so that it can be called at the beginning of each
session rather than initialisation time only.

Since the trace ID isn't expected to change with every session,
moving it with the default tracer initialisation.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-01 14:12:14 -07:00
Mathieu Poirier 54ff892b76 coresight: etm4x: splitting struct etmv4_drvdata
Similar to what was done on etm3x, splitting driver structure
etmv4_drvdata in two.  One half is concerned with the HW
characteristics that are generally static in nature.  The other
half deals with user configuration and will change from one
trace session to another.

No gain/loss of functionality is incurred from this patch.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-01 14:12:14 -07:00
Mathieu Poirier 7c38aa4b03 coresight: etm4x: adding config and traceid registers
Adding new sysFS management interface to query the configuration
and the traceid registers.  Both are required to convey information
to the perf cmd line tools when using ETMv4 tracers as PMU.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-01 14:12:14 -07:00
Mathieu Poirier a77de2637c coresight: etm4x: moving sysFS entries to a dedicated file
As with the etm3x driver, sysFS entries are big enough to justify
their own file. As such moving all sysFS related declarations to
a dedicated location.

No gain/loss of functionality is incurred from this patch.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-01 14:12:14 -07:00
Paul Gortmaker ca48fa22c3 drivers/hwtracing: make coresight-etm-perf.c explicitly non-modular
In commit 941943cf51 ("drivers/hwtracing:
make coresight-* explicitly non-modular") we removed all uses of
modular functions/macros in favour of their built-in equivlents in
this subsystem.

However that commit and commit 0bcbf2e30f
("coresight: etm-perf: new PMU driver for ETM tracers") were in flight
at the same time, and hence one new non-modular user of module_init
crept back in.  Fix it up like we did all the others.

Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.

Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-05 12:19:39 -08:00
Paul Gortmaker 941943cf51 drivers/hwtracing: make coresight-* explicitly non-modular
None of the Kconfig currently controlling compilation of any of
the files here are tristate, meaning that none of it currently
is being built as a module by anyone.

We need not be concerned about .remove functions and blocking the
unbind sysfs operations, since that was already done in a recent
commit.

Lets remove any remaining modular references, so that when reading the
drivers there is no doubt they are builtin-only.

All drivers get mostly the same changes, so they are handled in batch.
Changes are (1) convert to builtin_amba_driver, (2) delete module.h
include where unused, and (3) relocate the description into the
comments so we don't need MODULE_DESCRIPTION and associated tags.

The etm3x and etm4x use module_param_named, and have been adjusted
to just include moduleparam.h for that purpose.

In commit f309d44431 ("platform_device:
better support builtin boilerplate avoidance") we introduced the
builtin_driver macro.

Here we use that support and extend it to amba driver registration,
so where a driver is clearly non-modular and builtin-only, we can
update with the simple mapping of

     module_amba_driver(...)  ---> builtin_amba_driver(...)

Since module_amba_driver() uses the same init level priority as
builtin_amba_driver() the init ordering remains unchanged with
this commit.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-20 14:11:01 -08:00
Mathieu Poirier 17534ceb83 coresight: introducing a global trace ID function
TraceID values have to be unique for all tracers and
consistent between drivers and user space.  As such
introducing a central function to be used whenever a
traceID value is required.

The patch also account for data traceIDs, which are usually
I(N) + 1.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-20 14:11:01 -08:00
Mathieu Poirier 0bcbf2e30f coresight: etm-perf: new PMU driver for ETM tracers
Perf is a well known and used tool for performance monitoring
and much more. A such it is an ideal candidate for integration
with coresight based HW tracing.

This patch introduces a PMU that represent a coresight tracer to
the Perf core.

Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-20 14:11:01 -08:00
Mathieu Poirier 2997aa4063 coresight: etb10: implementing AUX API
Adding an ETB10 specific AUX area operations to be used
by the perf framework when events are initialised.

Part of this operation involves modeling the mmap'ed area
based on the specific ways a sink buffer gathers information.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-20 14:11:01 -08:00
Mathieu Poirier e827d4550a coresight: etb10: adding operation mode for sink->enable()
Adding an operation mode to the sink->enable() API in order
to prevent simultaneous access from different callers.

TPIU and TMC won't be supplemented with the AUX area
API immediately and as such ignore the new mode.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-20 14:11:01 -08:00
Mathieu Poirier 27b10da8ff coresight: etb10: moving to local atomic operations
Moving to use local atomic operations to take advantage of the
lockless implementation, something that will come handy when
the ETB is accessed from the Perf subsystem. Also changing the
name of the variable to something more meaningful.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-20 14:11:01 -08:00
Mathieu Poirier 882d5e1124 coresight: etm3x: implementing perf_enable/disable() API
That way traces can be enabled and disabled automatically
from the Perf subystem using the PMU abstraction.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-20 14:11:01 -08:00
Mathieu Poirier 2127154d11 coresight: etm3x: implementing user/kernel mode tracing
Adding new mode to limit tracing to kernel or user space.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-20 14:11:01 -08:00
Mathieu Poirier c528a25ac7 coresight: etm3x: consolidating initial config
There is really no point in having two functions to take care
of doing the initial tracer configuration.  As such moving
everything to 'etm_set_default()'.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-20 14:11:01 -08:00