The tegra_smmu_group_get was added to group devices in different
SWGROUPs and it'd return a NULL group pointer upon a mismatch at
tegra_smmu_find_group(), so for most of clients/devices, it very
likely would mismatch and need a fallback generic_device_group().
But now tegra_smmu_group_get handles devices in same SWGROUP too,
which means that it would allocate a group for every new SWGROUP
or would directly return an existing one upon matching a SWGROUP,
i.e. any device will go through this function.
So possibility of having a NULL group pointer in device_group()
is upon failure of either devm_kzalloc() or iommu_group_alloc().
In either case, calling generic_device_group() no longer makes a
sense. Especially for devm_kzalloc() failing case, it'd cause a
problem if it fails at devm_kzalloc() yet succeeds at a fallback
generic_device_group(), because it does not create a group->list
for other devices to match.
This patch simply unwraps the function to clean it up.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20201125101013.14953-2-nicoleotsuka@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently iommu_create_device_direct_mappings() is called
without checking the return of __iommu_attach_device(). This
may result in failures in iommu driver if dev attach returns
error.
Fixes: ce574c27ae ("iommu: Move iommu_group_create_direct_mappings() out of iommu_group_add_device()")
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20201119165846.34180-1-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Robin Murphy pointed out that if the arm-smmu driver probes before
the qcom_scm driver, we may call qcom_scm_qsmmu500_wait_safe_toggle()
before the __scm is initialized.
Now, getting this to happen is a bit contrived, as in my efforts it
required enabling asynchronous probing for both drivers, moving the
firmware dts node to the end of the dtsi file, as well as forcing a
long delay in the qcom_scm_probe function.
With those tweaks we ran into the following crash:
[ 2.631040] arm-smmu 15000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA
[ 2.633372] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
...
[ 2.633402] [0000000000000000] user address but active_mm is swapper
[ 2.633409] Internal error: Oops: 96000005 [#1] PREEMPT SMP
[ 2.633415] Modules linked in:
[ 2.633427] CPU: 5 PID: 117 Comm: kworker/u16:2 Tainted: G W 5.10.0-rc1-mainline-00025-g272a618fc36-dirty #3971
[ 2.633430] Hardware name: Thundercomm Dragonboard 845c (DT)
[ 2.633448] Workqueue: events_unbound async_run_entry_fn
[ 2.633456] pstate: 80c00005 (Nzcv daif +PAN +UAO -TCO BTYPE=--)
[ 2.633465] pc : qcom_scm_qsmmu500_wait_safe_toggle+0x78/0xb0
[ 2.633473] lr : qcom_smmu500_reset+0x58/0x78
[ 2.633476] sp : ffffffc0105a3b60
...
[ 2.633567] Call trace:
[ 2.633572] qcom_scm_qsmmu500_wait_safe_toggle+0x78/0xb0
[ 2.633576] qcom_smmu500_reset+0x58/0x78
[ 2.633581] arm_smmu_device_reset+0x194/0x270
[ 2.633585] arm_smmu_device_probe+0xc94/0xeb8
[ 2.633592] platform_drv_probe+0x58/0xa8
[ 2.633597] really_probe+0xec/0x398
[ 2.633601] driver_probe_device+0x5c/0xb8
[ 2.633606] __driver_attach_async_helper+0x64/0x88
[ 2.633610] async_run_entry_fn+0x4c/0x118
[ 2.633617] process_one_work+0x20c/0x4b0
[ 2.633621] worker_thread+0x48/0x460
[ 2.633628] kthread+0x14c/0x158
[ 2.633634] ret_from_fork+0x10/0x18
[ 2.633642] Code: a9034fa0 d0007f73 29107fa0 91342273 (f9400020)
To avoid this, this patch adds a check on qcom_scm_is_available() in
the qcom_smmu_impl_init() function, returning -EPROBE_DEFER if its
not ready.
This allows the driver to try to probe again later after qcom_scm has
finished probing.
Reported-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Andy Gross <agross@kernel.org>
Cc: Maulik Shah <mkshah@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Lina Iyer <ilina@codeaurora.org>
Cc: iommu@lists.linux-foundation.org
Cc: linux-arm-msm <linux-arm-msm@vger.kernel.org>
Link: https://lore.kernel.org/r/20201112220520.48159-1-john.stultz@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
The invalidate_range() notifier is called for any change to the address
space. Perform the required ATC invalidations.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20201106155048.997886-5-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
The sva_bind() function allows devices to access process address spaces
using a PASID (aka SSID).
(1) bind() allocates or gets an existing MMU notifier tied to the
(domain, mm) pair. Each mm gets one PASID.
(2) Any change to the address space calls invalidate_range() which sends
ATC invalidations (in a subsequent patch).
(3) When the process address space dies, the release() notifier disables
the CD to allow reclaiming the page tables. Since release() has to
be light we do not instruct device drivers to stop DMA here, we just
ignore incoming page faults from this point onwards.
To avoid any event 0x0a print (C_BAD_CD) we disable translation
without clearing CD.V. PCIe Translation Requests and Page Requests
are silently denied. Don't clear the R bit because the S bit can't
be cleared when STALL_MODEL==0b10 (forced), and clearing R without
clearing S is useless. Faulting transactions will stall and will be
aborted by the IOPF handler.
(4) After stopping DMA, the device driver releases the bond by calling
unbind(). We release the MMU notifier, free the PASID and the bond.
Three structures keep track of bonds:
* arm_smmu_bond: one per {device, mm} pair, the handle returned to the
device driver for a bind() request.
* arm_smmu_mmu_notifier: one per {domain, mm} pair, deals with ATS/TLB
invalidations and clearing the context descriptor on mm exit.
* arm_smmu_ctx_desc: one per mm, holds the pinned ASID and pgd.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20201106155048.997886-4-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Let IOMMU drivers allocate a single PASID per mm. Store the mm in the
IOASID set to allow refcounting and searching mm by PASID, when handling
an I/O page fault.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20201106155048.997886-3-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Let IOASID users take references to existing ioasids with ioasid_get().
ioasid_put() drops a reference and only frees the ioasid when its
reference number is zero. It returns true if the ioasid was freed.
For drivers that don't call ioasid_get(), ioasid_put() is the same as
ioasid_free().
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20201106155048.997886-2-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
AMD IOMMU requires 4k-aligned pages for the event log, the PPR log,
and the completion wait write-back regions. However, when allocating
the pages, they could be part of large mapping (e.g. 2M) page.
This causes #PF due to the SNP RMP hardware enforces the check based
on the page level for these data structures.
So, fix by calling set_memory_4k() on the allocated pages.
Fixes: c69d89aff3 ("iommu/amd: Use 4K page for completion wait write-back semaphore")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Link: https://lore.kernel.org/r/20201105145832.3065-1-suravee.suthikulpanit@amd.com
Signed-off-by: Will Deacon <will@kernel.org>
Merge swiotlb updates from Konrad, as we depend on the updated function
prototype for swiotlb_tbl_map_single(), which dropped the 'tbl_dma_addr'
argument in -rc4.
* 'stable/for-linus-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb: remove the tbl_dma_addr argument to swiotlb_tbl_map_single
swiotlb: fix "x86: Don't panic if can not alloc buffer for swiotlb"
- Fix boot when intel iommu initialisation fails under TXT (tboot)
- Fix intel iommu compilation error when DMAR is enabled without ATS
- Temporarily update IOMMU MAINTAINERs entry
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl+3p6gQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNPowCADBKq5PBRwqIM1tmntRu5rePf/WuB1BotlJ
cUUR8dIxFDvKMeGvN4mDbn/5jjL1+TlD7sQqFh+gcWJ9tImpAMzp1ENbg71isl5o
Ej21X9YhjfiIsKpTrNGxcetCkYaR2tp8Z4/WzSQaO+IGB578dQ9VwiwSnDyFdWUb
1Qcj712ainYvKjbq4NyL80lPm9v43OV8QZ73WeelzBjE2UcDFAV0Xl4BIX8uuGtv
I1x03JfgzmzhVBmpj5HUGPsSopMDdo5K4vlcqscqSqvBY90iHD5fgRF4ZatTjR1t
PVM/1+c9vdJIWSxSt1hsB8DPtqXVOvGjzrLW/h63rxyWsISwkAq0
=DNX/
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull iommu fixes from Will Deacon:
"Two straightforward vt-d fixes:
- Fix boot when intel iommu initialisation fails under TXT (tboot)
- Fix intel iommu compilation error when DMAR is enabled without ATS
and temporarily update IOMMU MAINTAINERs entry"
* tag 'iommu-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
MAINTAINERS: Temporarily add myself to the IOMMU entry
iommu/vt-d: Fix compile error with CONFIG_PCI_ATS not set
iommu/vt-d: Avoid panic if iommu init fails in tboot system
Fix the compile error below (CONFIG_PCI_ATS not set):
drivers/iommu/intel/dmar.c: In function ‘vf_inherit_msi_domain’:
drivers/iommu/intel/dmar.c:338:59: error: ‘struct pci_dev’ has no member named ‘physfn’; did you mean ‘is_physfn’?
338 | dev_set_msi_domain(&pdev->dev, dev_get_msi_domain(&pdev->physfn->dev));
| ^~~~~~
| is_physfn
Fixes: ff828729be ("iommu/vt-d: Cure VF irqdomain hickup")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/linux-iommu/CAMuHMdXA7wfJovmfSH2nbAhN0cPyCiFHodTvg4a8Hm9rx5Dj-w@mail.gmail.com/
Link: https://lore.kernel.org/r/20201119055119.2862701-1-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
- Cure the fallout from the MSI irqdomain overhaul which missed that the
Intel IOMMU does not register virtual function devices and therefore
never reaches the point where the MSI interrupt domain is assigned. This
makes the VF devices use the non-remapped MSI domain which is trapped by
the IOMMU/remap unit.
- Remove an extra space in the SGI_UV architecture type procfs output for
UV5.
- Remove a unused function which was missed when removing the UV BAU TLB
shootdown handler.
-----BEGIN PGP SIGNATURE-----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=X/P+
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into for-next/iommu/fixes
Pull in x86 fixes from Thomas, as they include a change to the Intel DMAR
code on which we depend:
* tag 'x86-urgent-2020-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
iommu/vt-d: Cure VF irqdomain hickup
x86/platform/uv: Fix copied UV5 output archtype
x86/platform/uv: Drop last traces of uv_flush_tlb_others
The AMD IOMMU has two modes for generating its own interrupts.
The first is very much based on PCI MSI, and can be configured by Linux
precisely that way. But like legacy unmapped PCI MSI it's limited to
8 bits of APIC ID.
The second method does not use PCI MSI at all in hardawre, and instead
configures the INTCAPXT registers in the IOMMU directly with the APIC ID
and vector.
In the latter case, the IOMMU driver would still use pci_enable_msi(),
read back (through MMIO) the MSI message that Linux wrote to the PCI MSI
table, then swizzle those bits into the appropriate register.
Historically, this worked because__irq_compose_msi_msg() would silently
generate an invalid MSI message with the high bits of the APIC ID in the
high bits of the MSI address. That hack was intended only for the Intel
IOMMU, and I recently enforced that, introducing a warning in
__irq_msi_compose_msg() if it was invoked with an APIC ID above 255.
Fix the AMD IOMMU not to depend on that hack any more, by having its own
irqdomain and directly putting the bits from the irq_cfg into the right
place in its ->activate() method.
Fixes: 47bea873cf "x86/msi: Only use high bits of MSI address for DMAR unit")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/05e3a5ba317f5ff48d2f8356f19e617f8b9d23a4.camel@infradead.org
"intel_iommu=off" command line is used to disable iommu but iommu is force
enabled in a tboot system for security reason.
However for better performance on high speed network device, a new option
"intel_iommu=tboot_noforce" is introduced to disable the force on.
By default kernel should panic if iommu init fail in tboot for security
reason, but it's unnecessory if we use "intel_iommu=tboot_noforce,off".
Fix the code setting force_on and move intel_iommu_tboot_noforce
from tboot code to intel iommu code.
Fixes: 7304e8f28b ("iommu/vt-d: Correctly disable Intel IOMMU force on")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com>
Tested-by: Lukasz Hawrylko <lukasz.hawrylko@linux.intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20201110071908.3133-1-zhenzhong.duan@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
When ever an iova alloc request fails we free the iova
ranges present in the percpu iova rcaches and then retry
but the global iova rcache is not freed as a result we could
still see iova alloc failure even after retry as global
rcache is holding the iova's which can cause fragmentation.
So, free the global iova rcache as well and then go for the
retry.
Signed-off-by: Vijayanand Jitta <vjitta@codeaurora.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: John Garry <john.garry@huaqwei.com>
Link: https://lore.kernel.org/r/1601451864-5956-2-git-send-email-vjitta@codeaurora.org
Signed-off-by: Will Deacon <will@kernel.org>
When ever a new iova alloc request comes iova is always searched
from the cached node and the nodes which are previous to cached
node. So, even if there is free iova space available in the nodes
which are next to the cached node iova allocation can still fail
because of this approach.
Consider the following sequence of iova alloc and frees on
1GB of iova space
1) alloc - 500MB
2) alloc - 12MB
3) alloc - 499MB
4) free - 12MB which was allocated in step 2
5) alloc - 13MB
After the above sequence we will have 12MB of free iova space and
cached node will be pointing to the iova pfn of last alloc of 13MB
which will be the lowest iova pfn of that iova space. Now if we get an
alloc request of 2MB we just search from cached node and then look
for lower iova pfn's for free iova and as they aren't any, iova alloc
fails though there is 12MB of free iova space.
To avoid such iova search failures do a retry from the last rb tree node
when iova search fails, this will search the entire tree and get an iova
if its available.
Signed-off-by: Vijayanand Jitta <vjitta@codeaurora.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/1601451864-5956-1-git-send-email-vjitta@codeaurora.org
Signed-off-by: Will Deacon <will@kernel.org>
Commit 6ee1b77ba3 ("iommu/vt-d: Add svm/sva invalidate function")
introduced intel_iommu_sva_invalidate() when CONFIG_INTEL_IOMMU_SVM.
This function uses the dedicated static variable inv_type_granu_table
and functions to_vtd_granularity() and to_vtd_size().
These parts are unused when !CONFIG_INTEL_IOMMU_SVM, and hence,
make CC=clang W=1 warns with an -Wunused-function warning.
Include these parts conditionally on CONFIG_INTEL_IOMMU_SVM.
Fixes: 6ee1b77ba3 ("iommu/vt-d: Add svm/sva invalidate function")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20201115205951.20698-1-lukas.bulwahn@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
- Cure the fallout from the MSI irqdomain overhaul which missed that the
Intel IOMMU does not register virtual function devices and therefore
never reaches the point where the MSI interrupt domain is assigned. This
makes the VF devices use the non-remapped MSI domain which is trapped by
the IOMMU/remap unit.
- Remove an extra space in the SGI_UV architecture type procfs output for
UV5.
- Remove a unused function which was missed when removing the UV BAU TLB
shootdown handler.
-----BEGIN PGP SIGNATURE-----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=X/P+
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A small set of fixes for x86:
- Cure the fallout from the MSI irqdomain overhaul which missed that
the Intel IOMMU does not register virtual function devices and
therefore never reaches the point where the MSI interrupt domain is
assigned. This made the VF devices use the non-remapped MSI domain
which is trapped by the IOMMU/remap unit
- Remove an extra space in the SGI_UV architecture type procfs output
for UV5
- Remove a unused function which was missed when removing the UV BAU
TLB shootdown handler"
* tag 'x86-urgent-2020-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
iommu/vt-d: Cure VF irqdomain hickup
x86/platform/uv: Fix copied UV5 output archtype
x86/platform/uv: Drop last traces of uv_flush_tlb_others
The recent changes to store the MSI irqdomain pointer in struct device
missed that Intel DMAR does not register virtual function devices. Due to
that a VF device gets the plain PCI-MSI domain assigned and then issues
compat MSI messages which get caught by the interrupt remapping unit.
Cure that by inheriting the irq domain from the physical function
device.
Ideally the irqdomain would be associated to the bus, but DMAR can have
multiple units and therefore irqdomains on a single bus. The VF 'bus' could
of course inherit the domain from the PF, but that'd be yet another x86
oddity.
Fixes: 85a8dfc57a ("iommm/vt-d: Store irq domain in struct device")
Reported-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Link: https://lore.kernel.org/r/draft-87eekymlpz.fsf@nanos.tec.linutronix.de
Pull swiotlb fixes from Konrad Rzeszutek Wilk:
"Two tiny fixes for issues that make drivers under Xen unhappy under
certain conditions"
* 'stable/for-linus-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb: remove the tbl_dma_addr argument to swiotlb_tbl_map_single
swiotlb: fix "x86: Don't panic if can not alloc buffer for swiotlb"
Registering the remapping irq domain unconditionally is potentially
allowing I/O-APIC and MSI interrupts to be parented in the IOMMU IR domain
even when IR is disabled. Don't do that.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201111144322.1659970-1-dwmw2@infradead.org
All the bitfields in here are overlaid on top of each other since
they're a union. Change the second u64 to be in a struct so it does
the intended thing.
Fixes: b5c3786ee3 ("iommu/amd: Use msi_msg shadow structs")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201111144322.1659970-2-dwmw2@infradead.org
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl+oiOgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGKBQIAJw6oad/FA7j9OO2
dMoaXb8UaBehGWgW2rdfWrFPV5v0DBnp/GkdRpLoZIjV3W4mBfnog7bIa4Eswlxo
Y8sZxo5/3JlgJQUkHvzR1TYk5z61lHkUw9Kj/cCyx6YdbjSl19AfFsnhQVVMuyp9
TXL2c7hxkHlw8eBGrymVu0Ip7Zq0x8O2g+8nQpmRcvaR6SBuSHdikDF/iWCtU1YW
wpk5eWEVaAO67keZOz6b+aCFHqjFX+1dUBBuPnslucYLR73Qi16hfaU9pebe97Gb
lX/MJ1bR9BeRp314cF0PYbm4WhKjRLudHOFJH8x3dj/BiYNrFK3SJGLiiTwsrAZ8
kytU0Xs=
=Ke/D
-----END PGP SIGNATURE-----
Merge v5.10-rc3 into drm-next
We need commit f8f6ae5d07 ("mm: always have io_remap_pfn_range() set
pgprot_decrypted()") to be able to merge Jason's cleanup patch.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
For the Adreno GPU's SMMU, we want SCTLR.HUPCF set to ensure that
pending translations are not terminated on iova fault. Otherwise
a terminated CP read could hang the GPU by returning invalid
command-stream data. Add a hook to for the implementation to modify
the sctlr value if it wishes.
Co-developed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Link: https://lore.kernel.org/r/20201109184728.2463097-3-jcrouse@codeaurora.org
Signed-off-by: Will Deacon <will@kernel.org>
Add a special implementation for the SMMU attached to most Adreno GPU
target triggered from the qcom,adreno-smmu compatible string.
The new Adreno SMMU implementation will enable split pagetables
(TTBR1) for the domain attached to the GPU device (SID 0) and
hard code it context bank 0 so the GPU hardware can implement
per-instance pagetables.
Co-developed-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201109184728.2463097-2-jcrouse@codeaurora.org
Signed-off-by: Will Deacon <will@kernel.org>
Fix the following coccinelle warnings:
./drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c:36:12-26: WARNING: Assignment of 0/1 to bool variable
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Link: https://lore.kernel.org/r/1604744439-6846-1-git-send-email-kaixuxia@tencent.com
Signed-off-by: Will Deacon <will@kernel.org>
The implementation-specific subclassing of struct arm_smmu_device really
wanted an appropriate version of realloc(). Now that one exists, take
full advantage of it to clarify what's actually being done here.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/355e8d70c7f47d462d85b386aa09f2b5c655f023.1603713428.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The "data->flags" variable is a u64 so if one of the high 32 bits is
set the original code will allow it, but it should be rejected. The
fix is to declare "mask" as a u64 instead of a u32.
Fixes: d90573812e ("iommu/uapi: Handle data and argsz filled by users")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20201103101623.GA1127762@mwanda
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In prq_event_thread(), the QI_PGRP_PDP is wrongly set by
'req->pasid_present' which should be replaced to
'req->priv_data_present'.
Fixes: 5b438f4ba3 ("iommu/vt-d: Support page request in scalable mode")
Signed-off-by: Liu, Yi L <yi.l.liu@intel.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1604025444-6954-3-git-send-email-yi.y.sun@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Should get correct sid and set it into sdev. Because we execute
'sdev->sid != req->rid' in the loop of prq_event_thread().
Fixes: eb8d93ea3c ("iommu/vt-d: Report page request faults for guest SVA")
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1604025444-6954-2-git-send-email-yi.y.sun@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Certain device drivers allocate IO queues on a per-cpu basis.
On AMD EPYC platform, which can support up-to 256 cpu threads,
this can exceed the current MAX_IRQ_PER_TABLE limit of 256,
and result in the error message:
AMD-Vi: Failed to allocate IRTE
This has been observed with certain NVME devices.
AMD IOMMU hardware can actually support upto 512 interrupt
remapping table entries. Therefore, update the driver to
match the hardware limit.
Please note that this also increases the size of interrupt remapping
table to 8KB per device when using the 128-bit IRTE format.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20201015025002.87997-1-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The tbl_dma_addr argument is used to check the DMA boundary for the
allocations, and thus needs to be a dma_addr_t. swiotlb-xen instead
passed a physical address, which could lead to incorrect results for
strange offsets. Fix this by removing the parameter entirely and hard
code the DMA address for io_tlb_start instead.
Fixes: 91ffe4ad53 ("swiotlb-xen: introduce phys_to_dma/dma_to_phys translations")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Midgard GPUs have ACE-Lite master interfaces which allows systems to
integrate them in an I/O-coherent manner. It seems that from the GPU's
viewpoint, the rest of the system is its outer shareable domain, and so
even when snoop signals are wired up, they are only emitted for outer
shareable accesses. As such, setting the TTBR_SHARE_OUTER bit does
indeed get coherent pagetable walks working nicely for the coherent
T620 in the Arm Juno SoC.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8df778355378127ea7eccc9521d6427e3e48d4f2.1600780574.git.robin.murphy@arm.com
The firmware found in some Qualcomm platforms intercepts writes to S2CR
in order to replace bypass type streams with fault; and ignore S2CR
updates of type fault.
Detect this behavior and implement a custom write_s2cr function in order
to trick the firmware into supporting bypass streams by the means of
configuring the stream for translation using a reserved and disabled
context bank.
Also circumvent the problem of configuring faulting streams by
configuring the stream as bypass.
Cc: <stable@vger.kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20201019182323.3162386-4-bjorn.andersson@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
The Qualcomm boot loader configures stream mapping for the peripherals
that it accesses and in particular it sets up the stream mapping for the
display controller to be allowed to scan out a splash screen or EFI
framebuffer.
Read back the stream mappings during initialization and make the
arm-smmu driver maintain the streams in bypass mode.
Cc: <stable@vger.kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20201019182323.3162386-3-bjorn.andersson@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
The firmware found in some Qualcomm platforms intercepts writes to the
S2CR register in order to replace the BYPASS type with FAULT. Further
more it treats faults at this level as catastrophic and restarts the
device.
Add support for providing implementation specific versions of the S2CR
write function, to allow the Qualcomm driver to work around this
behavior.
Cc: <stable@vger.kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20201019182323.3162386-2-bjorn.andersson@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
If the 15-bit APIC ID support is present in emulated MSI then there's no
need for the pseudo-remapping support.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-34-dwmw2@infradead.org
Now that the old get_irq_domain() method has gone, consolidate on just the
map_XXX_to_iommu() functions.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-31-dwmw2@infradead.org
The I/O-APIC generates an MSI cycle with address/data bits taken from its
Redirection Table Entry in some combination which used to make sense, but
now is just a bunch of bits which get passed through in some seemingly
arbitrary order.
Instead of making IRQ remapping drivers directly frob the I/OA-PIC RTE, let
them just do their job and generate an MSI message. The bit swizzling to
turn that MSI message into the I/O-APIC's RTE is the same in all cases,
since it's a function of the I/O-APIC hardware. The IRQ remappers have no
real need to get involved with that.
The only slight caveat is that the I/OAPIC is interpreting some of those
fields too, and it does want the 'vector' field to be unique to make EOI
work. The AMD IOMMU happens to put its IRTE index in the bits that the
I/O-APIC thinks are the vector field, and accommodates this requirement by
reserving the first 32 indices for the I/O-APIC. The Intel IOMMU doesn't
actually use the bits that the I/O-APIC thinks are the vector field, so it
fills in the 'pin' value there instead.
[ tglx: Replaced the unreadably macro maze with the cleaned up RTE/msi_msg
bitfields and added commentry to explain the mapping magic ]
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-22-dwmw2@infradead.org
Having two seperate structs for the I/O-APIC RTE entries (non-remapped and
DMAR remapped) requires type casts and makes it hard to map.
Combine them in IO_APIC_routing_entry by defining a union of two 64bit
bitfields. Use naming which reflects which bits are shared and which bits
are actually different for the operating modes.
[dwmw2: Fix it up and finish the job, pulling the 32-bit w1,w2 words for
register access into the same union and eliminating a few more
places where bits were accessed through masks and shifts.]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-21-dwmw2@infradead.org
'trigger' and 'polarity' are used throughout the I/O-APIC code for handling
the trigger type (edge/level) and the active low/high configuration. While
there are defines for initializing these variables and struct members, they
are not used consequently and the meaning of 'trigger' and 'polarity' is
opaque and confusing at best.
Rename them to 'is_level' and 'active_low' and make them boolean in various
structs so it's entirely clear what the meaning is.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-20-dwmw2@infradead.org
Get rid of the macro mess and use the shadow structs for the x86 specific
MSI message format. Convert the intcapxt setup to use named bitfields as
well while touching it anyway.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-15-dwmw2@infradead.org
Use the bitfields in the x86 shadow struct to compose the MSI message.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-14-dwmw2@infradead.org
apic::irq_dest_mode is actually a boolean, but defined as u32 and named in
a way which does not explain what it means.
Make it a boolean and rename it to 'dest_mode_logical'
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-9-dwmw2@infradead.org
The enum ioapic_irq_destination_types and the enumerated constants starting
with 'dest_' are gross misnomers because they describe the delivery mode.
Rename then enum and the constants so they actually make sense.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-6-dwmw2@infradead.org
- Fix a build regression with !CONFIG_IOMMU_API
-----BEGIN PGP SIGNATURE-----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=og0e
-----END PGP SIGNATURE-----
Merge tag 'iommu-fix-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fix from Joerg Roedel:
"Fix a build regression with !CONFIG_IOMMU_API"
* tag 'iommu-fix-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Don't dereference iommu_device if IOMMU_API is not built
Since commit c40aaaac10 ("iommu/vt-d: Gracefully handle DMAR units
with no supported address widths") dmar.c needs struct iommu_device to
be selected. We can drop this dependency by not dereferencing struct
iommu_device if IOMMU_API is not selected and by reusing the information
stored in iommu->drhd->ignored instead.
This fixes the following build error when IOMMU_API is not selected:
drivers/iommu/intel/dmar.c: In function ‘free_iommu’:
drivers/iommu/intel/dmar.c:1139:41: error: ‘struct iommu_device’ has no member named ‘ops’
1139 | if (intel_iommu_enabled && iommu->iommu.ops) {
^
Fixes: c40aaaac10 ("iommu/vt-d: Gracefully handle DMAR units with no supported address widths")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/20201013073055.11262-1-brgl@bgdev.pl
Signed-off-by: Joerg Roedel <jroedel@suse.de>
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common
code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
-----BEGIN PGP SIGNATURE-----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=Bkf/
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
* tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits)
ARM/ixp4xx: add a missing include of dma-map-ops.h
dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling
dma-direct: factor out a dma_direct_alloc_from_pool helper
dma-direct check for highmem pages in dma_direct_alloc_pages
dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h>
dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma
dma-mapping: move dma-debug.h to kernel/dma/
dma-mapping: remove <asm/dma-contiguous.h>
dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h>
dma-contiguous: remove dma_contiguous_set_default
dma-contiguous: remove dev_set_cma_area
dma-contiguous: remove dma_declare_contiguous
dma-mapping: split <linux/dma-mapping.h>
cma: decrease CMA_ALIGNMENT lower limit to 2
firewire-ohci: use dma_alloc_pages
dma-iommu: implement ->alloc_noncoherent
dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods
dma-mapping: add a new dma_alloc_pages API
dma-mapping: remove dma_cache_sync
53c700: convert to dma_alloc_noncoherent
...
Including:
- ARM-SMMU Updates from Will:
- Continued SVM enablement, where page-table is shared with
CPU
- Groundwork to support integrated SMMU with Adreno GPU
- Allow disabling of MSI-based polling on the kernel
command-line
- Minor driver fixes and cleanups (octal permissions, error
messages, ...)
- Secure Nested Paging Support for AMD IOMMU. The IOMMU will
fault when a device tries DMA on memory owned by a guest. This
needs new fault-types as well as a rewrite of the IOMMU memory
semaphore for command completions.
- Allow broken Intel IOMMUs (wrong address widths reported) to
still be used for interrupt remapping.
- IOMMU UAPI updates for supporting vSVA, where the IOMMU can
access address spaces of processes running in a VM.
- Support for the MT8167 IOMMU in the Mediatek IOMMU driver.
- Device-tree updates for the Renesas driver to support r8a7742.
- Several smaller fixes and cleanups all over the place.
-----BEGIN PGP SIGNATURE-----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=C0Sg
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- ARM-SMMU Updates from Will:
- Continued SVM enablement, where page-table is shared with CPU
- Groundwork to support integrated SMMU with Adreno GPU
- Allow disabling of MSI-based polling on the kernel command-line
- Minor driver fixes and cleanups (octal permissions, error
messages, ...)
- Secure Nested Paging Support for AMD IOMMU. The IOMMU will fault when
a device tries DMA on memory owned by a guest. This needs new
fault-types as well as a rewrite of the IOMMU memory semaphore for
command completions.
- Allow broken Intel IOMMUs (wrong address widths reported) to still be
used for interrupt remapping.
- IOMMU UAPI updates for supporting vSVA, where the IOMMU can access
address spaces of processes running in a VM.
- Support for the MT8167 IOMMU in the Mediatek IOMMU driver.
- Device-tree updates for the Renesas driver to support r8a7742.
- Several smaller fixes and cleanups all over the place.
* tag 'iommu-updates-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (57 commits)
iommu/vt-d: Gracefully handle DMAR units with no supported address widths
iommu/vt-d: Check UAPI data processed by IOMMU core
iommu/uapi: Handle data and argsz filled by users
iommu/uapi: Rename uapi functions
iommu/uapi: Use named union for user data
iommu/uapi: Add argsz for user filled data
docs: IOMMU user API
iommu/qcom: add missing put_device() call in qcom_iommu_of_xlate()
iommu/arm-smmu-v3: Add SVA device feature
iommu/arm-smmu-v3: Check for SVA features
iommu/arm-smmu-v3: Seize private ASID
iommu/arm-smmu-v3: Share process page tables
iommu/arm-smmu-v3: Move definitions to a header
iommu/io-pgtable-arm: Move some definitions to a header
iommu/arm-smmu-v3: Ensure queue is read after updating prod pointer
iommu/amd: Re-purpose Exclusion range registers to support SNP CWWB
iommu/amd: Add support for RMP_PAGE_FAULT and RMP_HW_ERR
iommu/amd: Use 4K page for completion wait write-back semaphore
iommu/tegra-smmu: Allow to group clients in same swgroup
iommu/tegra-smmu: Fix iova->phys translation
...
- Add support for generic initiator-only proximity domains to
the ACPI NUMA code and the architectures using it (Jonathan
Cameron).
- Clean up some non-ACPICA code referring to debug facilities from
ACPICA that are not actually used in there (Hanjun Guo).
- Add new DPTF driver for the PCH FIVR participant (Srinivas
Pandruvada).
- Reduce overhead related to accessing GPE registers in ACPICA and
the OS interface layer and make it possible to access GPE registers
using logical addresses if they are memory-mapped (Rafael Wysocki).
- Update the ACPICA code in the kernel to upstream revision 20200925
including changes as follows:
* Add predefined names from the SMBus sepcification (Bob Moore).
* Update acpi_help UUID list (Bob Moore).
* Return exceptions for string-to-integer conversions in iASL (Bob
Moore).
* Add a new "ALL <NameSeg>" debugger command (Bob Moore).
* Add support for 64 bit risc-v compilation (Colin Ian King).
* Do assorted cleanups (Bob Moore, Colin Ian King, Randy Dunlap).
- Add new ACPI backlight whitelist entry for HP 635 Notebook (Alex
Hung).
- Move TPS68470 OpRegion driver to drivers/acpi/pmic/ and split out
Kconfig and Makefile specific for ACPI PMIC (Andy Shevchenko).
- Clean up the ACPI SoC driver for AMD SoCs (Hanjun Guo).
- Add missing config_item_put() to fix refcount leak (Hanjun Guo).
- Drop lefrover field from struct acpi_memory_device (Hanjun Guo).
- Make the ACPI extlog driver check for RDMSR failures (Ben
Hutchings).
- Fix handling of lid state changes in the ACPI button driver when
input device is closed (Dmitry Torokhov).
- Fix several assorted build issues (Barnabás Pőcze, John Garry,
Nathan Chancellor, Tian Tao).
- Drop unused inline functions and reduce code duplication by using
kobj_to_dev() in the NFIT parsing code (YueHaibing, Wang Qing).
- Serialize tools/power/acpi Makefile (Thomas Renninger).
-----BEGIN PGP SIGNATURE-----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=feLU
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These add support for generic initiator-only proximity domains to the
ACPI NUMA code and the architectures using it, clean up some
non-ACPICA code referring to debug facilities from ACPICA, reduce the
overhead related to accessing GPE registers, add a new DPTF (Dynamic
Power and Thermal Framework) participant driver, update the ACPICA
code in the kernel to upstream revision 20200925, add a new ACPI
backlight whitelist entry, fix a few assorted issues and clean up some
code.
Specifics:
- Add support for generic initiator-only proximity domains to the
ACPI NUMA code and the architectures using it (Jonathan Cameron)
- Clean up some non-ACPICA code referring to debug facilities from
ACPICA that are not actually used in there (Hanjun Guo)
- Add new DPTF driver for the PCH FIVR participant (Srinivas
Pandruvada)
- Reduce overhead related to accessing GPE registers in ACPICA and
the OS interface layer and make it possible to access GPE registers
using logical addresses if they are memory-mapped (Rafael Wysocki)
- Update the ACPICA code in the kernel to upstream revision 20200925
including changes as follows:
+ Add predefined names from the SMBus sepcification (Bob Moore)
+ Update acpi_help UUID list (Bob Moore)
+ Return exceptions for string-to-integer conversions in iASL (Bob
Moore)
+ Add a new "ALL <NameSeg>" debugger command (Bob Moore)
+ Add support for 64 bit risc-v compilation (Colin Ian King)
+ Do assorted cleanups (Bob Moore, Colin Ian King, Randy Dunlap)
- Add new ACPI backlight whitelist entry for HP 635 Notebook (Alex
Hung)
- Move TPS68470 OpRegion driver to drivers/acpi/pmic/ and split out
Kconfig and Makefile specific for ACPI PMIC (Andy Shevchenko)
- Clean up the ACPI SoC driver for AMD SoCs (Hanjun Guo)
- Add missing config_item_put() to fix refcount leak (Hanjun Guo)
- Drop lefrover field from struct acpi_memory_device (Hanjun Guo)
- Make the ACPI extlog driver check for RDMSR failures (Ben
Hutchings)
- Fix handling of lid state changes in the ACPI button driver when
input device is closed (Dmitry Torokhov)
- Fix several assorted build issues (Barnabás Pőcze, John Garry,
Nathan Chancellor, Tian Tao)
- Drop unused inline functions and reduce code duplication by using
kobj_to_dev() in the NFIT parsing code (YueHaibing, Wang Qing)
- Serialize tools/power/acpi Makefile (Thomas Renninger)"
* tag 'acpi-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
ACPICA: Update version to 20200925 Version 20200925
ACPICA: Remove unnecessary semicolon
ACPICA: Debugger: Add a new command: "ALL <NameSeg>"
ACPICA: iASL: Return exceptions for string-to-integer conversions
ACPICA: acpi_help: Update UUID list
ACPICA: Add predefined names found in the SMBus sepcification
ACPICA: Tree-wide: fix various typos and spelling mistakes
ACPICA: Drop the repeated word "an" in a comment
ACPICA: Add support for 64 bit risc-v compilation
ACPI: button: fix handling lid state changes when input device closed
tools/power/acpi: Serialize Makefile
ACPI: scan: Replace ACPI_DEBUG_PRINT() with pr_debug()
ACPI: memhotplug: Remove 'state' from struct acpi_memory_device
ACPI / extlog: Check for RDMSR failure
ACPI: Make acpi_evaluate_dsm() prototype consistent
docs: mm: numaperf.rst Add brief description for access class 1.
node: Add access1 class to represent CPU to memory characteristics
ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3
ACPI: Let ACPI know we support Generic Initiator Affinity Structures
x86: Support Generic Initiator only proximity domains
...
* acpi-numa:
docs: mm: numaperf.rst Add brief description for access class 1.
node: Add access1 class to represent CPU to memory characteristics
ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3
ACPI: Let ACPI know we support Generic Initiator Affinity Structures
x86: Support Generic Initiator only proximity domains
ACPI: Support Generic Initiator only domains
ACPI / NUMA: Add stub function for pxm_to_node()
irq-chip/gic-v3-its: Fix crash if ITS is in a proximity domain without processor or memory
ACPI: Remove side effect of partly creating a node in acpi_get_node()
ACPI: Rename acpi_map_pxm_to_online_node() to pxm_to_online_node()
ACPI: Remove side effect of partly creating a node in acpi_map_pxm_to_online_node()
ACPI: Do not create new NUMA domains from ACPI static tables that are not SRAT
ACPI: Add out of bounds and numa_off protections to pxm_to_node()
devices which require non-PCI based MSI handling.
- Cleanup historical leftovers all over the place
- Rework the code to utilize more core functionality
- Wrap XEN PCI/MSI interrupts into an irqdomain to make irqdomain
assignment to PCI devices possible.
- Assign irqdomains to PCI devices at initialization time which allows
to utilize the full functionality of hierarchical irqdomains.
- Remove arch_.*_msi_irq() functions from X86 and utilize the irqdomain
which is assigned to the device for interrupt management.
- Make the arch_.*_msi_irq() support conditional on a config switch and
let the last few users select it.
-----BEGIN PGP SIGNATURE-----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=JlqV
-----END PGP SIGNATURE-----
Merge tag 'x86-irq-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 irq updates from Thomas Gleixner:
"Surgery of the MSI interrupt handling to prepare the support of
upcoming devices which require non-PCI based MSI handling:
- Cleanup historical leftovers all over the place
- Rework the code to utilize more core functionality
- Wrap XEN PCI/MSI interrupts into an irqdomain to make irqdomain
assignment to PCI devices possible.
- Assign irqdomains to PCI devices at initialization time which
allows to utilize the full functionality of hierarchical
irqdomains.
- Remove arch_.*_msi_irq() functions from X86 and utilize the
irqdomain which is assigned to the device for interrupt management.
- Make the arch_.*_msi_irq() support conditional on a config switch
and let the last few users select it"
* tag 'x86-irq-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
PCI: MSI: Fix Kconfig dependencies for PCI_MSI_ARCH_FALLBACKS
x86/apic/msi: Unbreak DMAR and HPET MSI
iommu/amd: Remove domain search for PCI/MSI
iommu/vt-d: Remove domain search for PCI/MSI[X]
x86/irq: Make most MSI ops XEN private
x86/irq: Cleanup the arch_*_msi_irqs() leftovers
PCI/MSI: Make arch_.*_msi_irq[s] fallbacks selectable
x86/pci: Set default irq domain in pcibios_add_device()
iommm/amd: Store irq domain in struct device
iommm/vt-d: Store irq domain in struct device
x86/xen: Wrap XEN MSI management into irqdomain
irqdomain/msi: Allow to override msi_domain_alloc/free_irqs()
x86/xen: Consolidate XEN-MSI init
x86/xen: Rework MSI teardown
x86/xen: Make xen_msi_init() static and rename it to xen_hvm_msi_init()
PCI/MSI: Provide pci_dev_has_special_msi_domain() helper
PCI_vmd_Mark_VMD_irqdomain_with_DOMAIN_BUS_VMD_MSI
irqdomain/msi: Provide DOMAIN_BUS_VMD_MSI
x86/irq: Initialize PCI/MSI domain at PCI init time
x86/pci: Reducde #ifdeffery in PCI init code
...
devices which doesn't need pinning of pages for DMA anymore. Add support
for the command submission to devices using new x86 instructions like
ENQCMD{,S} and MOVDIR64B. In addition, add support for process address
space identifiers (PASIDs) which are referenced by those command
submission instructions along with the handling of the PASID state on
context switch as another extended state. Work by Fenghua Yu, Ashok Raj,
Yu-cheng Yu and Dave Jiang.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAl996DIACgkQEsHwGGHe
VUqM4A/+JDI3GxNyMyBpJR0nQ2vs23ru1o3OxvxhYtcacZ0cNwkaO7g3TLQxH+LZ
k1QtvEd4jqI6BXV4de+HdZFDcqzikJf0KHnUflLTx956/Eop5rtxzMWVo69ZmYs8
QrW0mLhyh8eq19cOHbQBb4M/HFc1DXBw+l7Ft3MeA1divOVESRB/uNxjA25K4PvV
y+pipyUxqKSNhmBFf2bV8OVZloJiEtg3H6XudP0g/rZgjYe3qWxa+2iv6D08yBNe
g7NpMDMql2uo1bcFON7se2oF34poAi49BfiIQb5G4m9pnPyvVEMOCijxCx2FHYyF
nukyxt8g3Uq+UJYoolLNoWijL1jgBWeTBg1uuwsQOqWSARJx8nr859z0GfGyk2RP
GNoYE4rrWBUMEqWk4xeiPPgRDzY0cgcGh0AeuWqNhgBfbbZeGL0t0m5kfytk5i1s
W0YfRbz+T8+iYbgVfE/Zpthc7rH7iLL7/m34JC13+pzhPVTT32ECLJov2Ac8Tt15
X+fOe6kmlDZa4GIhKRzUoR2aEyLpjufZ+ug50hznBQjGrQfcx7zFqRAU4sJx0Yyz
rxUOJNZZlyJpkyXzc12xUvShaZvTcYenHGpxXl8TU3iMbY2otxk1Xdza8pc1LGQ/
qneYgILgKa+hSBzKhXCPAAgSYtPlvQrRizArS8Y0k/9rYaKCfBU=
=K9X4
-----END PGP SIGNATURE-----
Merge tag 'x86_pasid_for_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 PASID updates from Borislav Petkov:
"Initial support for sharing virtual addresses between the CPU and
devices which doesn't need pinning of pages for DMA anymore.
Add support for the command submission to devices using new x86
instructions like ENQCMD{,S} and MOVDIR64B. In addition, add support
for process address space identifiers (PASIDs) which are referenced by
those command submission instructions along with the handling of the
PASID state on context switch as another extended state.
Work by Fenghua Yu, Ashok Raj, Yu-cheng Yu and Dave Jiang"
* tag 'x86_pasid_for_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Add an enqcmds() wrapper for the ENQCMDS instruction
x86/asm: Carve out a generic movdir64b() helper for general usage
x86/mmu: Allocate/free a PASID
x86/cpufeatures: Mark ENQCMD as disabled when configured out
mm: Add a pasid member to struct mm_struct
x86/msr-index: Define an IA32_PASID MSR
x86/fpu/xstate: Add supervisor PASID state for ENQCMD
x86/cpufeatures: Enumerate ENQCMD and ENQCMDS instructions
Documentation/x86: Add documentation for SVA (Shared Virtual Addressing)
iommu/vt-d: Change flags type to unsigned int in binding mm
drm, iommu: Change type of pasid to u32
Merge dma-contiguous.h into dma-map-ops.h, after removing the comment
describing the contiguous allocator into kernel/dma/contigous.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Split out all the bits that are purely for dma_map_ops implementations
and related code into a new <linux/dma-map-ops.h> header so that they
don't get pulled into all the drivers. That also means the architecture
specific <asm/dma-mapping.h> is not pulled in by <linux/dma-mapping.h>
any more, which leads to a missing includes that were pulled in by the
x86 or arm versions in a few not overly portable drivers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
IOMMU generic layer already does sanity checks on UAPI data for version
match and argsz range based on generic information.
This patch adjusts the following data checking responsibilities:
- removes the redundant version check from VT-d driver
- removes the check for vendor specific data size
- adds check for the use of reserved/undefined flags
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/1601051567-54787-7-git-send-email-jacob.jun.pan@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
IOMMU user APIs are responsible for processing user data. This patch
changes the interface such that user pointers can be passed into IOMMU
code directly. Separate kernel APIs without user pointers are introduced
for in-kernel users of the UAPI functionality.
IOMMU UAPI data has a user filled argsz field which indicates the data
length of the structure. User data is not trusted, argsz must be
validated based on the current kernel data size, mandatory data size,
and feature flags.
User data may also be extended, resulting in possible argsz increase.
Backward compatibility is ensured based on size and flags (or
the functional equivalent fields) checking.
This patch adds sanity checks in the IOMMU layer. In addition to argsz,
reserved/unused fields in padding, flags, and version are also checked.
Details are documented in Documentation/userspace-api/iommu.rst
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/1601051567-54787-6-git-send-email-jacob.jun.pan@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
User APIs such as iommu_sva_unbind_gpasid() may also be used by the
kernel. Since we introduced user pointer to the UAPI functions,
in-kernel callers cannot share the same APIs. In-kernel callers are also
trusted, there is no need to validate the data.
We plan to have two flavors of the same API functions, one called
through ioctls, carrying a user pointer and one called directly with
valid IOMMU UAPI structs. To differentiate both, let's rename existing
functions with an iommu_uapi_ prefix.
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/1601051567-54787-5-git-send-email-jacob.jun.pan@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
IOMMU UAPI data size is filled by the user space which must be validated
by the kernel. To ensure backward compatibility, user data can only be
extended by either re-purpose padding bytes or extend the variable sized
union at the end. No size change is allowed before the union. Therefore,
the minimum size is the offset of the union.
To use offsetof() on the union, we must make it named.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/linux-iommu/20200611145518.0c2817d6@x1.home/
Link: https://lore.kernel.org/r/1601051567-54787-4-git-send-email-jacob.jun.pan@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit 387caf0b75 ("iommu/amd: Treat per-device exclusion
ranges as r/w unity-mapped regions") accidentally overwrites
the 'flags' field in IVMD (struct ivmd_header) when the I/O
virtualization memory definition is associated with the
exclusion range entry. This leads to the corrupted IVMD table
(incorrect checksum). The kdump kernel reports the invalid checksum:
ACPI BIOS Warning (bug): Incorrect checksum in table [IVRS] - 0x5C, should be 0x60 (20200717/tbprint-177)
AMD-Vi: [Firmware Bug]: IVRS invalid checksum
Fix the above-mentioned issue by modifying the 'struct unity_map_entry'
member instead of the IVMD header.
Cleanup: The *exclusion_range* functions are not used anymore, so
get rid of them.
Fixes: 387caf0b75 ("iommu/amd: Treat per-device exclusion ranges as r/w unity-mapped regions")
Reported-and-tested-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20200926102602.19177-1-adrianhuang0701@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
if of_find_device_by_node() succeed, qcom_iommu_of_xlate() doesn't have
a corresponding put_device(). Thus add put_device() to fix the exception
handling for this function implementation.
Fixes: 0ae349a0f3 ("iommu/qcom: Add qcom_iommu")
Acked-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20200929014037.2436663-1-yukuai3@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Implement the IOMMU device feature callbacks to support the SVA feature.
At the moment dev_has_feat() returns false since I/O Page Faults and BTM
aren't yet implemented.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20200918101852.582559-12-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Aggregate all sanity-checks for sharing CPU page tables with the SMMU
under a single ARM_SMMU_FEAT_SVA bit. For PCIe SVA, users also need to
check FEAT_ATS and FEAT_PRI. For platform SVA, they will have to check
FEAT_STALLS.
Introduce ARM_SMMU_FEAT_BTM (Broadcast TLB Maintenance), but don't
enable it at the moment. Since the entire VMID space is shared with the
CPU, enabling DVM (by clearing SMMU_CR2.PTM) could result in
over-invalidation and affect performance of stage-2 mappings.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20200918101852.582559-11-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
The SMMU has a single ASID space, the union of shared and private ASID
sets. This means that the SMMU driver competes with the arch allocator
for ASIDs. Shared ASIDs are those of Linux processes, allocated by the
arch, and contribute in broadcast TLB maintenance. Private ASIDs are
allocated by the SMMU driver and used for "classic" map/unmap DMA. They
require command-queue TLB invalidations.
When we pin down an mm_context and get an ASID that is already in use by
the SMMU, it belongs to a private context. We used to simply abort the
bind, but this is unfair to users that would be unable to bind a few
seemingly random processes. Try to allocate a new private ASID for the
context, and make the old ASID shared.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20200918101852.582559-10-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
With Shared Virtual Addressing (SVA), we need to mirror CPU TTBR, TCR,
MAIR and ASIDs in SMMU contexts. Each SMMU has a single ASID space split
into two sets, shared and private. Shared ASIDs correspond to those
obtained from the arch ASID allocator, and private ASIDs are used for
"classic" map/unmap DMA.
A possible conflict happens when trying to use a shared ASID that has
already been allocated for private use by the SMMU driver. This will be
addressed in a later patch by replacing the private ASID. At the
moment we return -EBUSY.
Each mm_struct shared with the SMMU will have a single context
descriptor. Add a refcount to keep track of this. It will be protected
by the global SVA lock.
Introduce a new arm-smmu-v3-sva.c file and the CONFIG_ARM_SMMU_V3_SVA
option to let users opt in SVA support.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20200918101852.582559-9-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Allow sharing structure definitions with the upcoming SVA support for
Arm SMMUv3, by moving them to a separate header. We could surgically
extract only what is needed but keeping all definitions in one place
looks nicer.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20200918101852.582559-8-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Extract some of the most generic TCR defines, so they can be reused by
the page table sharing code.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200918101852.582559-6-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Reading the 'prod' MMIO register in order to determine whether or not
there is valid data beyond 'cons' for a given queue does not provide
sufficient dependency ordering, as the resulting access is address
dependent only on 'cons' and can therefore be speculated ahead of time,
potentially allowing stale data to be read by the CPU.
Use readl() instead of readl_relaxed() when updating the shadow copy of
the 'prod' pointer, so that all speculated memory reads from the
corresponding queue can occur only from valid slots.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Link: https://lore.kernel.org/r/1601281922-117296-1-git-send-email-wangzhou1@hisilicon.com
[will: Use readl() instead of explicit barrier. Update 'cons' side to match.]
Signed-off-by: Will Deacon <will@kernel.org>
This API is the equivalent of alloc_pages, except that the returned memory
is guaranteed to be DMA addressable by the passed in device. The
implementation will also be used to provide a more sensible replacement
for DMA_ATTR_NON_CONSISTENT flag.
Additionally dma_alloc_noncoherent is switched over to use dma_alloc_pages
as its backend.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> (MIPS part)
Several ACPI static tables contain references to proximity domains.
ACPI 6.3 has clarified that only entries in SRAT may define a new
domain (sec 5.2.16).
Those tables described in the ACPI spec have additional clarifying text.
NFIT: Table 5-132,
"Integer that represents the proximity domain to which the memory
belongs. This number must match with corresponding entry in the
SRAT table."
HMAT: Table 5-145,
"... This number must match with the corresponding entry in the SRAT
table's processor affinity structure ... if the initiator is a processor,
or the Generic Initiator Affinity Structure if the initiator is a generic
initiator".
IORT and DMAR are defined by external specifications.
Intel Virtualization Technology for Directed I/O Rev 3.1 does not make any
explicit statements, but the general SRAT statement above will still apply.
https://software.intel.com/sites/default/files/managed/c5/15/vt-directed-io-spec.pdf
IO Remapping Table, Platform Design Document rev D, also makes not explicit
statement, but refers to ACPI SRAT table for more information and again the
generic SRAT statement above applies.
https://developer.arm.com/documentation/den0049/d/
In conclusion, any proximity domain specified in these tables, should be a
reference to a proximity domain also found in SRAT, and they should not be
able to instantiate a new domain. Hence we switch to pxm_to_node() which
will only return existing nodes.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Barry Song <song.bao.hua@hisilicon.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When the IOMMU SNP support bit is set in the IOMMU Extended Features
register, hardware re-purposes the following registers:
1. IOMMU Exclusion Base register (MMIO offset 0020h) to
Completion Wait Write-Back (CWWB) Base register
2. IOMMU Exclusion Range Limit (MMIO offset 0028h) to
Completion Wait Write-Back (CWWB) Range Limit register
and requires the IOMMU CWWB semaphore base and range to be programmed
in the register offset 0020h and 0028h accordingly.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Link: https://lore.kernel.org/r/20200923121347.25365-4-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
IOMMU SNP support requires the completion wait write-back semaphore to be
implemented using a 4K-aligned page, where the page address is to be
programmed into the newly introduced MMIO base/range registers.
This new scheme uses a per-iommu atomic variable to store the current
semaphore value, which is incremented for every completion wait command.
Since this new scheme is also compatible with non-SNP mode,
generalize the driver to use 4K page for completion-wait semaphore in
both modes.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Link: https://lore.kernel.org/r/20200923121347.25365-2-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
There can be clients using the same swgroup in DT, for example i2c0
and i2c1. The current driver will add them to separate IOMMU groups,
though it has implemented device_group() callback which is to group
devices using different swgroups like DC and DCB.
All clients having the same swgroup should be also added to the same
IOMMU group so as to share an asid. Otherwise, the asid register may
get overwritten every time a new device is attached.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20200911071643.17212-4-nicoleotsuka@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
IOVA might not be always 4KB aligned. So tegra_smmu_iova_to_phys
function needs to add on the lower 12-bit offset from input iova.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20200911071643.17212-3-nicoleotsuka@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
PAGE_SHIFT and PAGE_MASK are defined corresponding to the page size
for CPU virtual addresses, which means PAGE_SHIFT could be a number
other than 12, but tegra-smmu maintains fixed 4KB IOVA pages and has
fixed [21:12] bit range for PTE entries.
So this patch replaces all PAGE_SHIFT/PAGE_MASK references with the
macros defined with SMMU_PTE_SHIFT.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20200911071643.17212-2-nicoleotsuka@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
if of_find_device_by_node() succeed, exynos_iommu_of_xlate() doesn't have
a corresponding put_device(). Thus add put_device() to fix the exception
handling for this function implementation.
Fixes: aa759fd376 ("iommu/exynos: Add callback for initializing devices from device tree")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200918011335.909141-1-yukuai3@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Sprinkle a few `const`s where helpers don't need write access.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Do a bit of prep work to add the upcoming adreno-smmu implementation.
Add an hook to allow the implementation to choose which context banks
to allocate.
Move some of the common structs to arm-smmu.h in anticipation of them
being used by the implementations and update some of the existing hooks
to pass more information that the implementation will need.
These modifications will be used by the upcoming Adreno SMMU
implementation to identify the GPU device and properly configure it
for pagetable switching.
Co-developed-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Enable TTBR1 for a context bank if IO_PGTABLE_QUIRK_ARM_TTBR1 is selected
by the io-pgtable configuration.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Construct the io-pgtable config before calling the implementation specific
init_context function and pass it so the implementation specific function
can get a chance to change it before the io-pgtable is created.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
When building with C=1, sparse reports some issues regarding endianness
annotations:
arm-smmu-v3.c:221:26: warning: cast to restricted __le64
arm-smmu-v3.c:221:24: warning: incorrect type in assignment (different base types)
arm-smmu-v3.c:221:24: expected restricted __le64 [usertype]
arm-smmu-v3.c:221:24: got unsigned long long [usertype]
arm-smmu-v3.c:229:20: warning: incorrect type in argument 1 (different base types)
arm-smmu-v3.c:229:20: expected restricted __le64 [usertype] *[assigned] dst
arm-smmu-v3.c:229:20: got unsigned long long [usertype] *ent
arm-smmu-v3.c:229:25: warning: incorrect type in argument 2 (different base types)
arm-smmu-v3.c:229:25: expected unsigned long long [usertype] *[assigned] src
arm-smmu-v3.c:229:25: got restricted __le64 [usertype] *
arm-smmu-v3.c:396:20: warning: incorrect type in argument 1 (different base types)
arm-smmu-v3.c:396:20: expected restricted __le64 [usertype] *[assigned] dst
arm-smmu-v3.c:396:20: got unsigned long long *
arm-smmu-v3.c:396:25: warning: incorrect type in argument 2 (different base types)
arm-smmu-v3.c:396:25: expected unsigned long long [usertype] *[assigned] src
arm-smmu-v3.c:396:25: got restricted __le64 [usertype] *
arm-smmu-v3.c:1349:32: warning: invalid assignment: |=
arm-smmu-v3.c:1349:32: left side has type restricted __le64
arm-smmu-v3.c:1349:32: right side has type unsigned long
arm-smmu-v3.c:1396:53: warning: incorrect type in argument 3 (different base types)
arm-smmu-v3.c:1396:53: expected restricted __le64 [usertype] *dst
arm-smmu-v3.c:1396:53: got unsigned long long [usertype] *strtab
arm-smmu-v3.c:1424:39: warning: incorrect type in argument 1 (different base types)
arm-smmu-v3.c:1424:39: expected unsigned long long [usertype] *[assigned] strtab
arm-smmu-v3.c:1424:39: got restricted __le64 [usertype] *l2ptr
While harmless, they are incorrect and could hide actual errors during
development. Fix them.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20200918141856.629722-1-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Checking for a nonzero dma_pfn_offset was a quick shortcut to validate
whether the DMA == phys assumption could hold at all. Checking for a
non-NULL dma_range_map is not quite equivalent, since a map may be
present to describe a limited DMA window even without an offset, and
thus this check can now yield false positives.
However, it only ever served to short-circuit going all the way through
to __arm_lpae_alloc_pages(), failing the canonical test there, and
having a bit more to clean up. As such, we can simply remove it without
loss of correctness.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The init_iova_flush_queue() function can fail if we run out of memory. Fall
back to noflush queue if it fails.
Signed-off-by: Tom Murphy <murphyt7@tcd.ie>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20200910122539.3662-1-murphyt7@tcd.ie
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit e52d58d54a ("iommu/amd: Use cmpxchg_double() when updating
128-bit IRTE") removed an assumption that modify_irte_ga always set
the valid bit, which requires the callers to set the appropriate value
for the struct irte_ga.valid bit before calling the function.
Similar to the commit 26e495f341 ("iommu/amd: Restore IRTE.RemapEn
bit after programming IRTE"), which is for the function
amd_iommu_deactivate_guest_mode().
The same change is also needed for the amd_iommu_activate_guest_mode().
Otherwise, this could trigger IO_PAGE_FAULT for the VFIO based VMs with
AVIC enabled.
Fixes: e52d58d54a ("iommu/amd: Use cmpxchg_double() when updating 128-bit IRTE")
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/20200916111720.43913-1-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The "num_tlb_lines" might not be a power-of-2 value, being 48 on
Tegra210 for example. So the current way of calculating tlb_mask
using the num_tlb_lines is not correct: tlb_mask=0x5f in case of
num_tlb_lines=48, which will trim a setting of 0x30 (48) to 0x10.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20200917113155.13438-2-nicoleotsuka@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Nicolin Chen