The comment that struct_mutex must be held is misleading. It is only
required when .gem_free_object() is used.
Since that one is going with the next patches, drop the reference.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515095118.2743122-7-emil.l.velikov@gmail.com
The mutex should be used, only by legacy drivers. Add a big warning to
deter people from using it.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515095118.2743122-6-emil.l.velikov@gmail.com
There's little point in providing partial and ancient information about
the struct_mutex. Some drivers are using it, new ones should not.
As-it this only provides for confusion.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515095118.2743122-5-emil.l.velikov@gmail.com
The i915 driver uses the struct_mutex, eventhough it does not use the
locked version of the drm_object_gem API.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515095118.2743122-4-emil.l.velikov@gmail.com
Use the drm_gem_object_put_unlocked in the documentation for
drm_gem_objects_lookup. The locked version of the helper should be used
solely by people who know exactly what they are doing.
Should prevent issues like ones adddressed with the next patch.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515095118.2743122-3-emil.l.velikov@gmail.com
The VRAM helpers managed the framebuffer memory for mgag200. This came
with several problems, as some MGA device require the scanout address
to be located at VRAM offset 0. It's incompatible with the page-flip
semantics of DRM's atomic modesettting. With atomic modesetting, old and
new framebuffers have to be located in VRAM at the same time. So at least
one of them has to reside at a non-0 offset.
This patch replaces VRAM helpers with SHMEM helpers. GEM SHMEM buffers
reside in system memory, and are shadow-copied into VRAM during page
flips. The shadow copy always starts at VRAM offset 0.
v2:
* revert dev->pdev changes
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-16-tzimmermann@suse.de
The mgag200 supports a single pipeline with only a primary plane. It can
be converted to simple KMS helpers. This also adds support for atomic
modesetting. Wayland compositors, which use pageflip ioctls, can now be
used with mgag200.
v2:
* prepare encoder and CRTC in a separate patch
* remove suspend/resume code in a separate patch
* don't call set_format_regs() in pipe_update()
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-15-tzimmermann@suse.de
The MGA CRTC data structure struct mga_crtc contains unused additional
fields; so it can removed. The standard DRM CRTC and encoder structures
are embedded now in struct drm_simple_display_pipe. Done in preparation
of converting mgag200 to simple KMS helpers.
v3:
* remove now-unused define MGAG200FB_CONN_LIMIT
* remove unused define MATROX_DPMS_CLEARED
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-14-tzimmermann@suse.de
The suspend/resume helpers are unused. Also remove associated state
from struct mga_device.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-13-tzimmermann@suse.de
Registers are initialized with constants. This is now done in
mgag200_init_regs(), mgag200_set_dac_regs() and mgag200_set_pci_regs().
Later patches should move these calls from mode setting to device
initialization.
v2:
* replace uint8_t with u8
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-12-tzimmermann@suse.de
The hiprivlvl settings are now updated in mgag200_g200se_set_hiprilvl()
and mgag200_g200ev_set_hiprilvl().
v2:
* replace uint8_t with u8
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-11-tzimmermann@suse.de
The TAGFIFO state is now reset in mgag200_g200er_reset_tagfifo().
v2:
* define MGAREG_SEQ1_SCROFF
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-10-tzimmermann@suse.de
The primary plane's format registers are now updated in a
mgag200_set_format_regs().
v2:
* get bpp shift from helper function
* replace uint8_t with u8
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-9-tzimmermann@suse.de
The framebuffer's pitch is now set in mgag200_set_offset().
v2:
* move offset and bpp-shift calculation into helper functions
* use u8 instead of uint8_t
* add MGAREG_CRTCEXT0_OFFSET_MASK
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-8-tzimmermann@suse.de
Setting the plane registers first and the mode registers afterwards
reproduces the sequence used by atomic helpers. Done in preparation
of switching to simple KMS helpers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-7-tzimmermann@suse.de
Set different fields in MISC in their rsp location in the code. This
patch also fixes a bug in the original code where the mode's SYNC flags
were never written into the MISC register.
v2:
* use u8 instead of uint8_t
* define MGAREG_MISC_CLK_SEL_MASK
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-6-tzimmermann@suse.de
The mode-setting code is now located in mgag200_set_mode_regs(), sans
a few flags that will be moved in a later patch for clarity.
v2:
* replace uint8_t with u8
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-5-tzimmermann@suse.de
The function now only takes the device structure, and the old and new
framebuffers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-4-tzimmermann@suse.de
All register names and fields are now named according to the
MGA programming manuals. The function doesn't need the CRTC, so
callers pass in the device structure directly. The logging now
uses device-specific macros.
The original implementation busy-waited for the VSYNC flag to go
up, to synchronize the page flip with the display's vblank. This
code has been moved to mga_crtc_mode_set_base(). It's still present
in the non-atomic code paths, but won't be used in atomic commits.
With atomic, we should use interrupts to synchronize with vblanks.
v3:
* clarify commit message wrt. vblank busy-waiting
v2:
* use to_mga_device()
* use MiB instead of MB
* replace empty while loop with do-while, fixes checkpatch warning
* replace uint{8,32}_t with u{8,32}
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-3-tzimmermann@suse.de
The HW cursor of Matrox G200 cards only supports a 16-color palette
format. Univeral planes require at least ARGB or a similar component-
based format, so remove the HW cursor.
Alternatively, the driver could dither a cursor image from ARGB to
16 colors. But this does not produce pleasent-looking results in
general, so it's useless for modern compositors.
Without HW support, compositors will use software rendering.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-2-tzimmermann@suse.de
If videomode_from_timings() returns true, the mode allocated with
drm_mode_create will be leaked.
Also, the return value of drm_mode_create() is never checked, and thus
could cause NULL deref.
Fix these two issues.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429104234.18910-1-tomi.valkeinen@ti.com
Reviewed-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
The ti-sn65dsi86 MIPI DSI to eDP bridge chip supports arbitrary
remapping of eDP lanes and also polarity inversion. Both of these
features have been described in the device tree bindings for the
device since the beginning but were never implemented in the driver.
Implement both of them.
Part of this change also allows you to (via the same device tree
bindings) specify to use fewer than the max number of DP lanes that
the panel reports. This could be useful if your display supports more
lanes but only a few are hooked up on your board.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200518114656.REPOST.v2.1.Ibc8eeddcee94984a608d6900b46f9ffde4045da4@changeid
If the rate in our table is _equal_ to the rate we want then it's OK
to pick it. It doesn't need to be greater than the one we want.
Fixes: a095f15c00 ("drm/bridge: add support for sn65dsi86 bridge driver")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504213225.1.I21646c7c37ff63f52ae6cdccc9bc829fbc3d9424@changeid
The AUX channel transfer error bits in the status register are latched
and need to be cleared. Clear them before doing our transfer so we
don't see old bits and get confused.
Without this patch having a single failure would mean that all future
transfers would look like they failed.
Fixes: b814ec6d45 ("drm/bridge: ti-sn65dsi86: Implement AUX channel")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200508163314.1.Idfa69d5d3fc9623083c0ff78572fea87dccb199c@changeid
The ti-sn65dsi86 MIPI DSI to eDP bridge chip has a dedicated hardware
HPD (Hot Plug Detect) pin on it, but it's mostly useless for eDP
because of excessive debouncing in hardware. Specifically there is no
way to disable the debouncing and for eDP debouncing hurts you because
HPD is just used for knowing when the panel is ready, not for
detecting physical plug events.
Currently the driver in Linux just assumes that nobody has HPD hooked
up. It relies on folks setting the "no-hpd" property in the panel
node to specify that HPD isn't hooked up and then the panel driver
using this to add some worst case delays when turning on the panel.
Apparently it's also useful to specify "no-hpd" in the bridge node so
that the bridge driver can make sure it's doing the right thing
without peeking into the panel [1]. This would be used if anyone ever
found it useful to implement support for the HW HPD pin on the bridge.
Let's add this property to the bindings.
NOTES:
- This is somewhat of a backward-incompatible change. All current
known users of ti-sn65dsi86 didn't have "no-hpd" specified in the
bridge node yet none of them had HPD hooked up. This worked because
the current Linux driver just assumed that HPD was never hooked up.
We could make it less incompatible by saying that for this bridge
it's assumed HPD isn't hooked up _unless_ a property is defined, but
"no-hpd" is much more standard and it's unlikely to matter unless
someone quickly goes and implements HPD in the driver.
- It is sensible to specify "no-hpd" at the bridge chip level and
specify "hpd-gpios" at the panel level. That would mean HPD is
hooked up to some other GPIO in the system, just not the hardware
HPD pin on the bridge chip.
[1] https://lore.kernel.org/r/20200417180819.GE5861@pendragon.ideasonboard.com
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507143354.v5.5.I72892d485088e57378a4748c86bc0f6c2494d807@changeid
The ti-sn65dsi86 MIPI DSI to eDP bridge chip has 4 pins on it that can
be used as GPIOs in a system. Each pin can be configured as input,
output, or a special function for the bridge chip. These are:
- GPIO1: SUSPEND Input
- GPIO2: DSIA VSYNC
- GPIO3: DSIA HSYNC or VSYNC
- GPIO4: PWM
Let's expose these pins as GPIOs. A few notes:
- Access to ti-sn65dsi86 is via i2c so we set "can_sleep".
- These pins can't be configured for IRQ.
- There are no programmable pulls or other fancy features.
- Keeping the bridge chip powered might be expensive. The driver is
setup such that if all used GPIOs are only inputs we'll power the
bridge chip on just long enough to read the GPIO and then power it
off again. Setting a GPIO as output will keep the bridge powered.
- If someone releases a GPIO we'll implicitly switch it to an input so
we no longer need to keep the bridge powered for it.
Because of all of the above limitations we just need to implement a
bare-bones GPIO driver. The device tree bindings already account for
this device being a GPIO controller so we only need the driver changes
for it.
NOTE: Despite the fact that these pins are nominally muxable I don't
believe it makes sense to expose them through the pinctrl interface as
well as the GPIO interface. The special functions are things that the
bridge chip driver itself would care about and it can just configure
the pins as needed.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
[added pdata->gchip.base = -1;]
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507143354.v5.1.Ia50267a5549392af8b37e67092ca653a59c95886@changeid
drivers/gpu/drm/drm_dp_mst_topology.c:2898:6: warning: symbol 'drm_dp_send_clear_payload_id_table' was not declared. Should it be static?
drivers/gpu/drm/drm_dp_mst_topology.c:5451:37: warning: missing braces around initializer
drivers/gpu/drm/drm_dp_mst_topology.c:5451:37: warning: missing braces around initializer
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200516212330.13633-4-chris@chris-wilson.co.uk
drivers/gpu/drm/drm_client_modeset.c: In function ‘drm_client_firmware_config’:
./include/linux/bits.h:26:28: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
__builtin_constant_p((l) > (h)), (l) > (h), 0)))
v2: Add a warning for passing connector_count==0 as this will hit an
infinite loop, so document the invalid parameter.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200516212330.13633-2-chris@chris-wilson.co.uk
drivers/gpu/drm/drm_managed.c:61:6: warning: symbol 'drm_managed_release' was not declared. Should it be static?
CC drivers/gpu/drm/drm_managed.o
drivers/gpu/drm/drm_managed.c:61:6: warning: no previous prototype for ‘drm_managed_release’ [-Wmissing-prototypes]
void drm_managed_release(struct drm_device *dev)
Fixes: c6603c740e ("drm: add managed resources tied to drm_device")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200516212330.13633-1-chris@chris-wilson.co.uk
Look up backlight device using devm_of_find_backlight().
This simplifies the code and prevents us from hardcoding
the node name in the driver.
v2:
- Added Cc: Peter Ujfalusi
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200517190139.740249-2-sam@ravnborg.org
drm_helper_probe_add_cmdline_mode() prefers using a probed mode matching
a video= argument over calculating our own timings for the user specified
mode using CVT or GTF.
But userspace code which is auto-configuring the mode may want to know that
the user has specified that mode on the kernel commandline so that it can
pick that mode over the mode which is marked as DRM_MODE_TYPE_PREFERRED.
This commit sets the DRM_MODE_TYPE_USERDEF flag on the matching mode, just
as we would do on the user-specified mode when no matching probed mode is
found.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200221173313.510235-2-hdegoede@redhat.com
i2c_new_client() is deprecated, use the replacement
i2c_new_client_device(). Also, we have a helper to check if a driver is
bound. Use it to simplify the code. Note that this changes the errno for
a failed device creation from ENOMEM to ENODEV. No callers currently
interpret this errno, though, so we use this condensed error check.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200316163907.13709-3-wsa+renesas@sang-engineering.com
Using plain echo to set the "force" connector attribute fails with
-EINVAL, because echo appends a newline to the output.
Replace strcmp with sysfs_streq to also accept strings that end with a
newline.
v2: use sysfs_streq instead of stripping trailing whitespace
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170817104307.17124-1-m.tretter@pengutronix.de
If the "handles" allocation or the copy_from_user() fails then we leak
"objs". It's supposed to be freed in panfrost_job_cleanup().
Fixes: c117aa4d87 ("drm: Add a drm_gem_objects_lookup helper")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200320132334.GC95012@mwanda
The function vop_cfg_done() is a simple VOP_REG_SET(). As such it should
be done under a reg_lock. A quick look through the driver shows that all
other instances (apart from driver init) have the lock. Do the same here
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: Heiko Stübner <heiko@sntech.de>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Sandy Huang <hjc@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200505151613.2932456-1-emil.l.velikov@gmail.com
Look up backlight device using devm_of_find_backlight().
This simplifies the code and prevents us from hardcoding
the node name in the driver.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514191001.457441-3-sam@ravnborg.org
Look up backlight device using devm_of_find_backlight().
This simplifies the code and prevents us from hardcoding
the node name in the driver.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Zheng Bin <zhengbin13@huawei.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Enrico Weigelt <info@metux.net>
Cc: Allison Randal <allison@lohutok.net>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514191001.457441-2-sam@ravnborg.org
The main DRM device is actually a virtual device so it doesn't have the
iommus property, which is instead on the DMA masters, in this case the
mixers.
Add a call to of_dma_configure with the mixers DT node but on the DRM
virtual device to configure it in the same way than the mixers.
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/9a4daf438dd3f2fe07afb23688bfb793a0613d7d.1589378833.git-series.maxime@cerno.tech
The R-Car DU driver calls drm_vblank_init via some helper functions in
probe(). From what I checked, most drivers do this as well. I have a
config now where DU always stays in deferred_probe state because of a
missing dependency. This means that every time I rebind another driver
like MMC, the vblank init message is displayed again when the DU driver
is retried. Because the message doesn't really carry a useful
information, I suggest to simply drop it.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200513201016.23047-1-wsa+renesas@sang-engineering.com
Now that atomic64_fetch_add() exists we can use it to return the base
context id, rather than the atomic64_add_return(N) - N concoction.
Suggested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200513074809.18194-2-chris@chris-wilson.co.uk
Storing the connector instance in struct mga_device avoids some
dynamic memory allocation. On errors, the connector's initializer
function now destroys the i2c structure. Done in preparation of
converting mgag200 to simple-KMS helpers.
v2:
* improved commit message (Michael)
* fixed error message for mgag200_vga_connector_init() (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507090315.21274-7-tzimmermann@suse.de
Emil Velikov