- Add support for generic initiator-only proximity domains to
the ACPI NUMA code and the architectures using it (Jonathan
Cameron).
- Clean up some non-ACPICA code referring to debug facilities from
ACPICA that are not actually used in there (Hanjun Guo).
- Add new DPTF driver for the PCH FIVR participant (Srinivas
Pandruvada).
- Reduce overhead related to accessing GPE registers in ACPICA and
the OS interface layer and make it possible to access GPE registers
using logical addresses if they are memory-mapped (Rafael Wysocki).
- Update the ACPICA code in the kernel to upstream revision 20200925
including changes as follows:
* Add predefined names from the SMBus sepcification (Bob Moore).
* Update acpi_help UUID list (Bob Moore).
* Return exceptions for string-to-integer conversions in iASL (Bob
Moore).
* Add a new "ALL <NameSeg>" debugger command (Bob Moore).
* Add support for 64 bit risc-v compilation (Colin Ian King).
* Do assorted cleanups (Bob Moore, Colin Ian King, Randy Dunlap).
- Add new ACPI backlight whitelist entry for HP 635 Notebook (Alex
Hung).
- Move TPS68470 OpRegion driver to drivers/acpi/pmic/ and split out
Kconfig and Makefile specific for ACPI PMIC (Andy Shevchenko).
- Clean up the ACPI SoC driver for AMD SoCs (Hanjun Guo).
- Add missing config_item_put() to fix refcount leak (Hanjun Guo).
- Drop lefrover field from struct acpi_memory_device (Hanjun Guo).
- Make the ACPI extlog driver check for RDMSR failures (Ben
Hutchings).
- Fix handling of lid state changes in the ACPI button driver when
input device is closed (Dmitry Torokhov).
- Fix several assorted build issues (Barnabás Pőcze, John Garry,
Nathan Chancellor, Tian Tao).
- Drop unused inline functions and reduce code duplication by using
kobj_to_dev() in the NFIT parsing code (YueHaibing, Wang Qing).
- Serialize tools/power/acpi Makefile (Thomas Renninger).
-----BEGIN PGP SIGNATURE-----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=feLU
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These add support for generic initiator-only proximity domains to the
ACPI NUMA code and the architectures using it, clean up some
non-ACPICA code referring to debug facilities from ACPICA, reduce the
overhead related to accessing GPE registers, add a new DPTF (Dynamic
Power and Thermal Framework) participant driver, update the ACPICA
code in the kernel to upstream revision 20200925, add a new ACPI
backlight whitelist entry, fix a few assorted issues and clean up some
code.
Specifics:
- Add support for generic initiator-only proximity domains to the
ACPI NUMA code and the architectures using it (Jonathan Cameron)
- Clean up some non-ACPICA code referring to debug facilities from
ACPICA that are not actually used in there (Hanjun Guo)
- Add new DPTF driver for the PCH FIVR participant (Srinivas
Pandruvada)
- Reduce overhead related to accessing GPE registers in ACPICA and
the OS interface layer and make it possible to access GPE registers
using logical addresses if they are memory-mapped (Rafael Wysocki)
- Update the ACPICA code in the kernel to upstream revision 20200925
including changes as follows:
+ Add predefined names from the SMBus sepcification (Bob Moore)
+ Update acpi_help UUID list (Bob Moore)
+ Return exceptions for string-to-integer conversions in iASL (Bob
Moore)
+ Add a new "ALL <NameSeg>" debugger command (Bob Moore)
+ Add support for 64 bit risc-v compilation (Colin Ian King)
+ Do assorted cleanups (Bob Moore, Colin Ian King, Randy Dunlap)
- Add new ACPI backlight whitelist entry for HP 635 Notebook (Alex
Hung)
- Move TPS68470 OpRegion driver to drivers/acpi/pmic/ and split out
Kconfig and Makefile specific for ACPI PMIC (Andy Shevchenko)
- Clean up the ACPI SoC driver for AMD SoCs (Hanjun Guo)
- Add missing config_item_put() to fix refcount leak (Hanjun Guo)
- Drop lefrover field from struct acpi_memory_device (Hanjun Guo)
- Make the ACPI extlog driver check for RDMSR failures (Ben
Hutchings)
- Fix handling of lid state changes in the ACPI button driver when
input device is closed (Dmitry Torokhov)
- Fix several assorted build issues (Barnabás Pőcze, John Garry,
Nathan Chancellor, Tian Tao)
- Drop unused inline functions and reduce code duplication by using
kobj_to_dev() in the NFIT parsing code (YueHaibing, Wang Qing)
- Serialize tools/power/acpi Makefile (Thomas Renninger)"
* tag 'acpi-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
ACPICA: Update version to 20200925 Version 20200925
ACPICA: Remove unnecessary semicolon
ACPICA: Debugger: Add a new command: "ALL <NameSeg>"
ACPICA: iASL: Return exceptions for string-to-integer conversions
ACPICA: acpi_help: Update UUID list
ACPICA: Add predefined names found in the SMBus sepcification
ACPICA: Tree-wide: fix various typos and spelling mistakes
ACPICA: Drop the repeated word "an" in a comment
ACPICA: Add support for 64 bit risc-v compilation
ACPI: button: fix handling lid state changes when input device closed
tools/power/acpi: Serialize Makefile
ACPI: scan: Replace ACPI_DEBUG_PRINT() with pr_debug()
ACPI: memhotplug: Remove 'state' from struct acpi_memory_device
ACPI / extlog: Check for RDMSR failure
ACPI: Make acpi_evaluate_dsm() prototype consistent
docs: mm: numaperf.rst Add brief description for access class 1.
node: Add access1 class to represent CPU to memory characteristics
ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3
ACPI: Let ACPI know we support Generic Initiator Affinity Structures
x86: Support Generic Initiator only proximity domains
...
-----BEGIN PGP SIGNATURE-----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=NNLw
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20201012' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
"A decent number of SELinux patches for v5.10, twenty two in total. The
highlights are listed below, but all of the patches pass our test
suite and merge cleanly.
- A number of changes to how the SELinux policy is loaded and managed
inside the kernel with the goal of improving the atomicity of a
SELinux policy load operation.
These changes account for the bulk of the diffstat as well as the
patch count. A special thanks to everyone who contributed patches
and fixes for this work.
- Convert the SELinux policy read-write lock to RCU.
- A tracepoint was added for audited SELinux access control events;
this should help provide a more unified backtrace across kernel and
userspace.
- Allow the removal of security.selinux xattrs when a SELinux policy
is not loaded.
- Enable policy capabilities in SELinux policies created with the
scripts/selinux/mdp tool.
- Provide some "no sooner than" dates for the SELinux checkreqprot
sysfs deprecation"
* tag 'selinux-pr-20201012' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: (22 commits)
selinux: provide a "no sooner than" date for the checkreqprot removal
selinux: Add helper functions to get and set checkreqprot
selinux: access policycaps with READ_ONCE/WRITE_ONCE
selinux: simplify away security_policydb_len()
selinux: move policy mutex to selinux_state, use in lockdep checks
selinux: fix error handling bugs in security_load_policy()
selinux: convert policy read-write lock to RCU
selinux: delete repeated words in comments
selinux: add basic filtering for audit trace events
selinux: add tracepoint on audited events
selinux: Create new booleans and class dirs out of tree
selinux: Standardize string literal usage for selinuxfs directory names
selinux: Refactor selinuxfs directory populating functions
selinux: Create function for selinuxfs directory cleanup
selinux: permit removing security.selinux xattr before policy load
selinux: fix memdup.cocci warnings
selinux: avoid dereferencing the policy prior to initialization
selinux: fix allocation failure check on newpolicy->sidtab
selinux: refactor changing booleans
selinux: move policy commit after updating selinuxfs
...
no conflicts at all. This pull includes:
- A reworked and expanded user-mode Linux document
- Some simplifications and improvements for submitting-patches.rst
- An emergency fix for (some) problems with Sphinx 3.x
- Some welcome automarkup improvements to automatically generate
cross-references to struct definitions and other documents
- The usual collection of translation updates, typo fixes, etc.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl+ErNYPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Y284H/3bv9fahbg16AJcKYqJXFHGpDs3CsASPnJqQ
9HQoV5tg6Qd4kI3oFb+30l8SK73Wr2t685/DhOPDRR/vN3B5M1vOQvPRL/dEqiwi
aUEhtMbnC/trSbteXsjGDWT+1EnI/+R3NFV++WiRp1XxE4DRXL3xySTeviR0IW+V
rQxU7VCcVp0bklVH+gqjrsvqU5iZeckyZB6evc8X92ThhzjNprR5KVxxgl1wxcu/
dPYizHoKYVoLVNw50rwPGt2hmq9RpyDM6Xh9UhLHcA57ENyzr8NNTJBOT0tVMTWV
smU01X/ECoy54kj1w8AKP+f7F0G7DUU+Jz68X0X/kYPq520dUs4=
=Ovox
-----END PGP SIGNATURE-----
Merge tag 'docs-5.10' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"As hoped, things calmed down for docs this cycle; fewer changes and
almost no conflicts at all. This includes:
- A reworked and expanded user-mode Linux document
- Some simplifications and improvements for submitting-patches.rst
- An emergency fix for (some) problems with Sphinx 3.x
- Some welcome automarkup improvements to automatically generate
cross-references to struct definitions and other documents
- The usual collection of translation updates, typo fixes, etc"
* tag 'docs-5.10' of git://git.lwn.net/linux: (81 commits)
gpiolib: Update indentation in driver.rst for code excerpts
Documentation/admin-guide: tainted-kernels: Fix typo occured
Documentation: better locations for sysfs-pci, sysfs-tagging
docs: programming-languages: refresh blurb on clang support
Documentation: kvm: fix a typo
Documentation: Chinese translation of Documentation/arm64/amu.rst
doc: zh_CN: index files in arm64 subdirectory
mailmap: add entry for <mstarovoitov@marvell.com>
doc: seq_file: clarify role of *pos in ->next()
docs: trace: ring-buffer-design.rst: use the new SPDX tag
Documentation: kernel-parameters: clarify "module." parameters
Fix references to nommu-mmap.rst
docs: rewrite admin-guide/sysctl/abi.rst
docs: fb: Remove vesafb scrollback boot option
docs: fb: Remove sstfb scrollback boot option
docs: fb: Remove matroxfb scrollback boot option
docs: fb: Remove framebuffer scrollback boot option
docs: replace the old User Mode Linux HowTo with a new one
Documentation/admin-guide: blockdev/ramdisk: remove use of "rdev"
Documentation/admin-guide: README & svga: remove use of "rdev"
...
This patch implements the basic functions of the BMC chip for some Intel
FPGA PCIe Acceleration Cards (PAC). The BMC is implemented using the
Intel MAX 10 CPLD.
This BMC chip is connected to the FPGA by a SPI bus. To provide direct
register access from the FPGA, the "SPI slave to Avalon Master Bridge"
(spi-avmm) IP is integrated in the chip. It converts encoded streams of
bytes from the host to the internal register read/write on the Avalon
bus. So This driver uses the regmap-spi-avmm for register accessing.
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
We marked /sys/fs/selinux/checkreqprot as deprecated in Linux v5.7,
but didn't provide any guidance as to the timeframe. Considering
the state of checkreqprot, it seems like one year should be enough
time.
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This driver adds support for Dynamic Platform and Thermal Framework
(DPTF) PCH (Platform Controller Hub) FIVR (Fully Integrated Voltage
Regulator) participant support.
This participant is responsible for exposing platform telemetry and
control for:
freq_mhz_high_clock
freq_mhz_low_clock
These attributes are used to get and set PCH FIVR switching frequency
for thermal and radio frequency interference mitigation.
Refer to Documentation/ABI/testing/sysfs-platform-dptf for ABI details.
ACPI methods description used in this driver:
RFC0: This ACPI method to set PCH FIVR switching frequency when FIVR
clock is 19.2MHz or 24MHz. The ACPI method takes a DWORD value.
GFC0: This ACPI method to get PCH FIVR switching frequency when FIVR
clock is 19.2MHz or 24MHz.
RFC1: This ACPI method to set PCH FIVR switching frequency when FIVR
clock is 38.4MHz. The ACPI method takes a DWORD value.
GFC1: This ACPI method to get PCH FIVR switching frequency when FIVR
clock is 38.4MHz.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Document the notes file in sysfs as the running vmlinux's .note section
in binary format. Hopefully this helps someone like me realize the
kernel exposes the note section in sysfs in the future. Take the date
from when the file was introduced. It's been a while so presumably this
is stable and not testing material.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200909063752.931283-1-swboyd@chromium.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Commit 792f73f747 ("powerpc/hv-24x7: Add sysfs files inside hv-24x7
device to show cpumask") added cpumask file as part of hv-24x7 driver
inside the interface folder. The cpumask file is supposed to be in the
top folder of the PMU driver in order to make hotplug work.
This patch fixes that issue and creates new group 'cpumask_attr_group'
to add cpumask file and make sure it added in top folder.
command:# cat /sys/devices/hv_24x7/cpumask
0
Fixes: 792f73f747 ("powerpc/hv-24x7: Add sysfs files inside hv-24x7 device to show cpumask")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200821080610.123997-1-kjain@linux.ibm.com
- Add 'Runtime Firmware Activation' support for NVDIMMs that advertise
the relevant capability
- Misc libnvdimm and DAX cleanups
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQT9vPEBxh63bwxRYEEPzq5USduLdgUCXzHodgAKCRAPzq5USduL
djTjAQD1THDmizHn16zd94ueygh/BXfN0zyeVvQH352ol7kdfQEAj2A7YJ9XBbBY
JC6/CNd+OiB9W88lLOUf3Waj1a7cUQ8=
=Q6qn
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updayes from Vishal Verma:
"You'd normally receive this pull request from Dan Williams, but he's
busy watching a newborn (Congrats Dan!), so I'm watching libnvdimm
this cycle.
This adds a new feature in libnvdimm - 'Runtime Firmware Activation',
and a few small cleanups and fixes in libnvdimm and DAX. I'd
originally intended to make separate topic-based pull requests - one
for libnvdimm, and one for DAX, but some of the DAX material fell out
since it wasn't quite ready.
Summary:
- add 'Runtime Firmware Activation' support for NVDIMMs that
advertise the relevant capability
- misc libnvdimm and DAX cleanups"
* tag 'libnvdimm-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm/security: ensure sysfs poll thread woke up and fetch updated attr
libnvdimm/security: the 'security' attr never show 'overwrite' state
libnvdimm/security: fix a typo
ACPI: NFIT: Fix ARS zero-sized allocation
dax: Fix incorrect argument passed to xas_set_err()
ACPI: NFIT: Add runtime firmware activate support
PM, libnvdimm: Add runtime firmware activation support
libnvdimm: Convert to DEVICE_ATTR_ADMIN_RO()
drivers/dax: Expand lock scope to cover the use of addresses
fs/dax: Remove unused size parameter
dax: print error message by pr_info() in __generic_fsdax_supported()
driver-core: Introduce DEVICE_ATTR_ADMIN_{RO,RW}
tools/testing/nvdimm: Emulate firmware activation commands
tools/testing/nvdimm: Prepare nfit_ctl_test() for ND_CMD_CALL emulation
tools/testing/nvdimm: Add command debug messages
tools/testing/nvdimm: Cleanup dimm index passing
ACPI: NFIT: Define runtime firmware activation commands
ACPI: NFIT: Move bus_dsm_mask out of generic nvdimm_bus_descriptor
libnvdimm: Validate command family indices
In this round, we've added two small interfaces, 1) GC_URGENT_LOW mode for
performance, and 2) F2FS_IOC_SEC_TRIM_FILE ioctl for security. The new GC
mode allows Android to run some lower priority GCs in background, while new
ioctl discards user information without race condition when the account is
removed. In addition, some patches were merged to address latency-related
issues. We've fixed some compression-related bug fixes as well as edge race
conditions.
Enhancement:
- add GC_URGENT_LOW mode in gc_urgent
- introduce F2FS_IOC_SEC_TRIM_FILE ioctl
- bypass racy readahead to improve read latencies
- shrink node_write lock coverage to avoid long latency
Bug fix:
- fix missing compression flag control, i_size, and mount option
- fix deadlock between quota writes and checkpoint
- remove inode eviction path in synchronous path to avoid deadlock
- fix to wait GCed compressed page writeback
- fix a kernel panic in f2fs_is_compressed_page
- check page dirty status before writeback
- wait page writeback before update in node page write flow
- fix a race condition between f2fs_write_end_io and f2fs_del_fsync_node_entry
We've added some minor sanity checks and refactored trivial code blocks for
better readability and debugging information.
-----BEGIN PGP SIGNATURE-----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=PjaF
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've added two small interfaces: (a) GC_URGENT_LOW
mode for performance and (b) F2FS_IOC_SEC_TRIM_FILE ioctl for
security.
The new GC mode allows Android to run some lower priority GCs in
background, while new ioctl discards user information without race
condition when the account is removed.
In addition, some patches were merged to address latency-related
issues. We've fixed some compression-related bug fixes as well as edge
race conditions.
Enhancements:
- add GC_URGENT_LOW mode in gc_urgent
- introduce F2FS_IOC_SEC_TRIM_FILE ioctl
- bypass racy readahead to improve read latencies
- shrink node_write lock coverage to avoid long latency
Bug fixes:
- fix missing compression flag control, i_size, and mount option
- fix deadlock between quota writes and checkpoint
- remove inode eviction path in synchronous path to avoid deadlock
- fix to wait GCed compressed page writeback
- fix a kernel panic in f2fs_is_compressed_page
- check page dirty status before writeback
- wait page writeback before update in node page write flow
- fix a race condition between f2fs_write_end_io and f2fs_del_fsync_node_entry
We've added some minor sanity checks and refactored trivial code
blocks for better readability and debugging information"
* tag 'f2fs-for-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (52 commits)
f2fs: prepare a waiter before entering io_schedule
f2fs: update_sit_entry: Make the judgment condition of f2fs_bug_on more intuitive
f2fs: replace test_and_set/clear_bit() with set/clear_bit()
f2fs: make file immutable even if releasing zero compression block
f2fs: compress: disable compression mount option if compression is off
f2fs: compress: add sanity check during compressed cluster read
f2fs: use macro instead of f2fs verity version
f2fs: fix deadlock between quota writes and checkpoint
f2fs: correct comment of f2fs_exist_written_data
f2fs: compress: delay temp page allocation
f2fs: compress: fix to update isize when overwriting compressed file
f2fs: space related cleanup
f2fs: fix use-after-free issue
f2fs: Change the type of f2fs_flush_inline_data() to void
f2fs: add F2FS_IOC_SEC_TRIM_FILE ioctl
f2fs: should avoid inode eviction in synchronous path
f2fs: segment.h: delete a duplicated word
f2fs: compress: fix to avoid memory leak on cc->cpages
f2fs: use generic names for generic ioctls
f2fs: don't keep meta inode pages used for compressed block migration
...
Pull input updates from Dmitry Torokhov:
- an update to Elan touchpad controller driver supporting newer ICs
with enhanced precision reports and a new firmware update process
- an update to EXC3000 touch controller supporting additional parts
- assorted driver fixups
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (27 commits)
Input: exc3000 - add support to query model and fw_version
Input: exc3000 - add reset gpio support
Input: exc3000 - add EXC80H60 and EXC80H84 support
dt-bindings: touchscreen: Convert EETI EXC3000 touchscreen to json-schema
Input: sentelic - fix error return when fsp_reg_write fails
Input: alps - remove redundant assignment to variable ret
Input: ims-pcu - return error code rather than -ENOMEM
Input: elan_i2c - add ic type 0x15
Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary
Input: uinput - fix typo in function name documentation
Input: ati_remote2 - add missing newlines when printing module parameters
Input: psmouse - add a newline when printing 'proto' by sysfs
Input: synaptics-rmi4 - drop a duplicated word
Input: elan_i2c - add support for high resolution reports
Input: elan_i2c - do not constantly re-query pattern ID
Input: elan_i2c - add firmware update info for ICs 0x11, 0x13, 0x14
Input: elan_i2c - handle firmware updated on newer ICs
Input: elan_i2c - add support for different firmware page sizes
Input: elan_i2c - fix detecting IAP version on older controllers
Input: elan_i2c - handle devices with patterns above 1
...
Core:
- Support out of order dma completion
- Support for repeating transaction
New controllers:
- Support for Actions S700 DMA engine
- Renesas R8A774E1, r8a7742 controller binding
- New driver for Xilinx DPDMA controller
Others:
- Support of out of order dma completion in idxd driver
- W=1 warning cleanup of subsystem
- Updates to ti-k3-dma, dw, idxd drivers
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAl8s6voACgkQfBQHDyUj
g0f7Aw/+NjqyWAMZ4WpP6p2AN+5Evs7MY0fhhJMkU7ShbQlBM1GKrrNpMhaOaMw2
KB7xWvsfMnpKhxcq5LL2ymMnzJgJHVi0Zp9aRwNQXmJfHyCTDoqv54ljd5ADaL/O
XLBLBWc6h5WbAsWmpiovb/EQ58RAU/bvlPD7gntK9Y8n5ha32c+jFnOg+Fd3uINl
x9uSHKUOWFVRvIJgOrFcFwl2eT0erFcme7WyCWuNfSFDZlJqOdfVf1TfTVcfyAYY
8r6VWPOyiAc97SPN1hVYMUqqTtRAEDlsPRfeyvUm2pnRJnbyJdHbvbA0l/OMvzH5
3q5SBXz6NgoZsO6GPiSEV679K0nsuZOCqfevNb6+UQUrO7f5JyEbwGTrWju6F3fg
UVTENto8XW7KCE+oTkJBgZ6utbDtK5dpoKghX59lN3nKogqzGi3JUlgTtlSIF+AY
CnmESWM37f1jw1Ew58gmSYRFfKQV2fLwcAePnaV4HaNV70uFoYnhPvVenSvgYeky
24D8O5fzzhRHsSqUPTLTZ/u4cGJtOiBzQWdWcUXig/mfHKpu9i4nejHmuA2x64l0
oFc3nKwd7XrGVg2l4XMx1T0x69+1dlc0eEkZ7lRGzZgDCMKeHEsLOBGaid+bMO09
4IMzxoQxINui6l8csX5ctbRdXfUFZKZaZU36RxQeysidLE6QDGk=
=OfZv
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"Core:
- Support out of order dma completion
- Support for repeating transaction
New controllers:
- Support for Actions S700 DMA engine
- Renesas R8A774E1, r8a7742 controller binding
- New driver for Xilinx DPDMA controller
Other:
- Support of out of order dma completion in idxd driver
- W=1 warning cleanup of subsystem
- Updates to ti-k3-dma, dw, idxd drivers"
* tag 'dmaengine-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (68 commits)
dmaengine: dw: Don't include unneeded header to platform data header
dmaengine: Actions: Add support for S700 DMA engine
dmaengine: Actions: get rid of bit fields from dma descriptor
dt-bindings: dmaengine: convert Actions Semi Owl SoCs bindings to yaml
dmaengine: idxd: add missing invalid flags field to completion
dmaengine: dw: Initialize max_sg_burst capability
dmaengine: dw: Introduce max burst length hw config
dmaengine: dw: Initialize min and max burst DMA device capability
dmaengine: dw: Set DMA device max segment size parameter
dmaengine: dw: Take HC_LLP flag into account for noLLP auto-config
dmaengine: Introduce DMA-device device_caps callback
dmaengine: Introduce max SG burst capability
dmaengine: Introduce min burst length capability
dt-bindings: dma: dw: Add max burst transaction length property
dt-bindings: dma: dw: Convert DW DMAC to DT binding
dmaengine: ti: k3-udma: Query throughput level information from hardware
dmaengine: ti: k3-udma: Use defines for capabilities register parsing
dmaengine: xilinx: dpdma: Fix kerneldoc warning
dmaengine: xilinx: dpdma: add missing kernel doc
dmaengine: xilinx: dpdma: remove comparison of unsigned expression
...
- Add support for (optionally) using queued spinlocks & rwlocks.
- Support for a new faster system call ABI using the scv instruction on Power9
or later.
- Drop support for the PROT_SAO mmap/mprotect flag as it will be unsupported on
Power10 and future processors, leaving us with no way to implement the
functionality it requests. This risks breaking userspace, though we believe
it is unused in practice.
- A bug fix for, and then the removal of, our custom stack expansion checking.
We now allow stack expansion up to the rlimit, like other architectures.
- Remove the remnants of our (previously disabled) topology update code, which
tried to react to NUMA layout changes on virtualised systems, but was prone
to crashes and other problems.
- Add PMU support for Power10 CPUs.
- A change to our signal trampoline so that we don't unbalance the link stack
(branch return predictor) in the signal delivery path.
- Lots of other cleanups, refactorings, smaller features and so on as usual.
Thanks to:
Abhishek Goel, Alastair D'Silva, Alexander A. Klimov, Alexey Kardashevskiy,
Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anton
Blanchard, Arnd Bergmann, Athira Rajeev, Balamuruhan S, Bharata B Rao, Bill
Wendling, Bin Meng, Cédric Le Goater, Chris Packham, Christophe Leroy,
Christoph Hellwig, Daniel Axtens, Dan Williams, David Lamparter, Desnes A.
Nunes do Rosario, Erhard F., Finn Thain, Frederic Barrat, Ganesh Goudar,
Gautham R. Shenoy, Geoff Levand, Greg Kurz, Gustavo A. R. Silva, Hari Bathini,
Harish, Imre Kaloz, Joel Stanley, Joe Perches, John Crispin, Jordan Niethe,
Kajol Jain, Kamalesh Babulal, Kees Cook, Laurent Dufour, Leonardo Bras, Li
RongQing, Madhavan Srinivasan, Mahesh Salgaonkar, Mark Cave-Ayland, Michal
Suchanek, Milton Miller, Mimi Zohar, Murilo Opsfelder Araujo, Nathan
Chancellor, Nathan Lynch, Naveen N. Rao, Nayna Jain, Nicholas Piggin, Oliver
O'Halloran, Palmer Dabbelt, Pedro Miraglia Franco de Carvalho, Philippe
Bergheaud, Pingfan Liu, Pratik Rajesh Sampat, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sam Bobroff, Sandipan Das, Santosh
Sivaraj, Satheesh Rajendran, Shirisha Ganta, Sourabh Jain, Srikar Dronamraju,
Stan Johnson, Stephen Rothwell, Thadeu Lima de Souza Cascardo, Thiago Jung
Bauermann, Tom Lane, Vaibhav Jain, Vladis Dronov, Wei Yongjun, Wen Xiong,
YueHaibing.
-----BEGIN PGP SIGNATURE-----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=QMY1
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add support for (optionally) using queued spinlocks & rwlocks.
- Support for a new faster system call ABI using the scv instruction on
Power9 or later.
- Drop support for the PROT_SAO mmap/mprotect flag as it will be
unsupported on Power10 and future processors, leaving us with no way
to implement the functionality it requests. This risks breaking
userspace, though we believe it is unused in practice.
- A bug fix for, and then the removal of, our custom stack expansion
checking. We now allow stack expansion up to the rlimit, like other
architectures.
- Remove the remnants of our (previously disabled) topology update
code, which tried to react to NUMA layout changes on virtualised
systems, but was prone to crashes and other problems.
- Add PMU support for Power10 CPUs.
- A change to our signal trampoline so that we don't unbalance the link
stack (branch return predictor) in the signal delivery path.
- Lots of other cleanups, refactorings, smaller features and so on as
usual.
Thanks to: Abhishek Goel, Alastair D'Silva, Alexander A. Klimov, Alexey
Kardashevskiy, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju
T Sudhakar, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Balamuruhan
S, Bharata B Rao, Bill Wendling, Bin Meng, Cédric Le Goater, Chris
Packham, Christophe Leroy, Christoph Hellwig, Daniel Axtens, Dan
Williams, David Lamparter, Desnes A. Nunes do Rosario, Erhard F., Finn
Thain, Frederic Barrat, Ganesh Goudar, Gautham R. Shenoy, Geoff Levand,
Greg Kurz, Gustavo A. R. Silva, Hari Bathini, Harish, Imre Kaloz, Joel
Stanley, Joe Perches, John Crispin, Jordan Niethe, Kajol Jain, Kamalesh
Babulal, Kees Cook, Laurent Dufour, Leonardo Bras, Li RongQing, Madhavan
Srinivasan, Mahesh Salgaonkar, Mark Cave-Ayland, Michal Suchanek, Milton
Miller, Mimi Zohar, Murilo Opsfelder Araujo, Nathan Chancellor, Nathan
Lynch, Naveen N. Rao, Nayna Jain, Nicholas Piggin, Oliver O'Halloran,
Palmer Dabbelt, Pedro Miraglia Franco de Carvalho, Philippe Bergheaud,
Pingfan Liu, Pratik Rajesh Sampat, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sam Bobroff, Sandipan Das, Santosh
Sivaraj, Satheesh Rajendran, Shirisha Ganta, Sourabh Jain, Srikar
Dronamraju, Stan Johnson, Stephen Rothwell, Thadeu Lima de Souza
Cascardo, Thiago Jung Bauermann, Tom Lane, Vaibhav Jain, Vladis Dronov,
Wei Yongjun, Wen Xiong, YueHaibing.
* tag 'powerpc-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (337 commits)
selftests/powerpc: Fix pkey syscall redefinitions
powerpc: Fix circular dependency between percpu.h and mmu.h
powerpc/powernv/sriov: Fix use of uninitialised variable
selftests/powerpc: Skip vmx/vsx/tar/etc tests on older CPUs
powerpc/40x: Fix assembler warning about r0
powerpc/papr_scm: Add support for fetching nvdimm 'fuel-gauge' metric
powerpc/papr_scm: Fetch nvdimm performance stats from PHYP
cpuidle: pseries: Fixup exit latency for CEDE(0)
cpuidle: pseries: Add function to parse extended CEDE records
cpuidle: pseries: Set the latency-hint before entering CEDE
selftests/powerpc: Fix online CPU selection
powerpc/perf: Consolidate perf_callchain_user_[64|32]()
powerpc/pseries/hotplug-cpu: Remove double free in error path
powerpc/pseries/mobility: Add pr_debug() for device tree changes
powerpc/pseries/mobility: Set pr_fmt()
powerpc/cacheinfo: Warn if cache object chain becomes unordered
powerpc/cacheinfo: Improve diagnostics about malformed cache lists
powerpc/cacheinfo: Use name@unit instead of full DT path in debug messages
powerpc/cacheinfo: Set pr_fmt()
powerpc: fix function annotations to avoid section mismatch warnings with gcc-10
...
Expose model and fw_version via sysfs. Also query the model
in probe to make sure, that the I2C communication with the
device works before successfully probing the driver.
This is a bit complicated, since EETI devices do not have
a sync interface. Sending the commands and directly reading
does not work. Sending the command and waiting for some time
is also not an option, since there might be touch events in
the mean time.
Last but not least we do not cache the results, since this
interface can be used to check the I2C communication is still
working as expected.
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20200805160520.456570-5-sebastian.reichel@collabora.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This series consists of the usual driver updates (ufs, qla2xxx, tcmu,
lpfc, hpsa, zfcp, scsi_debug) and minor bug fixes. We also have a
huge docbook fix update like most other subsystems and no major update
to the core (the few non trivial updates are either minor fixes or
removing an unused feature [scsi_sdb_cache]).
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXyxq1yYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishSoAAQChZ4i8
ZqYW3pL33JO3fA8vdjvLuyC489Hj4wzIsl3/bQEAxYyM6BSLvMoLWR2Plq/JmTLm
4W/LDptarpTiDI3NuDc=
=4b0W
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, qla2xxx, tcmu, lpfc,
hpsa, zfcp, scsi_debug) and minor bug fixes.
We also have a huge docbook fix update like most other subsystems and
no major update to the core (the few non trivial updates are either
minor fixes or removing an unused feature [scsi_sdb_cache])"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (307 commits)
scsi: scsi_transport_srp: Sanitize scsi_target_block/unblock sequences
scsi: ufs-mediatek: Apply DELAY_AFTER_LPM quirk to Micron devices
scsi: ufs: Introduce device quirk "DELAY_AFTER_LPM"
scsi: virtio-scsi: Correctly handle the case where all LUNs are unplugged
scsi: scsi_debug: Implement tur_ms_to_ready parameter
scsi: scsi_debug: Fix request sense
scsi: lpfc: Fix typo in comment for ULP
scsi: ufs-mediatek: Prevent LPM operation on undeclared VCC
scsi: iscsi: Do not put host in iscsi_set_flashnode_param()
scsi: hpsa: Correct ctrl queue depth
scsi: target: tcmu: Make TMR notification optional
scsi: target: tcmu: Implement tmr_notify callback
scsi: target: tcmu: Fix and simplify timeout handling
scsi: target: tcmu: Factor out new helper ring_insert_padding
scsi: target: tcmu: Do not queue aborted commands
scsi: target: tcmu: Use priv pointer in se_cmd
scsi: target: Add tmr_notify backend function
scsi: target: Modify core_tmr_abort_task()
scsi: target: iscsi: Fix inconsistent debug message
scsi: target: iscsi: Fix login error when receiving
...
Here is the large set of Staging and IIO driver patches for 5.9-rc1.
Lots of churn here, but overall the size increase in lines added is
small, while adding a load of new IIO drivers.
Major things in here:
- lots and lots of IIO new drivers and frameworks added
- IIO driver fixes and updates
- lots of tiny coding style cleanups for staging drivers
- vc04_services major reworks and cleanups
We had 3 set of drivers move out of staging in this round as well:
- wilc1000 wireless driver moved out of staging
- speakup moved out of staging
- most USB driver moved out of staging
Full details are in the shortlog.
All of these have been in linux-next with no reported issues. The last
few changes here were to resolve reported linux-next issues, and they
seem to have resolved the problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXyv2rA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yngIgCfZOVj022X+paV81NwvO/TroMDA7oAn1C4XCmY
Fxz55oHIyk9lbQxsDhID
=ujqG
-----END PGP SIGNATURE-----
Merge tag 'staging-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO driver updates from Greg KH:
"Here is the large set of Staging and IIO driver patches for 5.9-rc1.
Lots of churn here, but overall the size increase in lines added is
small, while adding a load of new IIO drivers.
Major things in here:
- lots and lots of IIO new drivers and frameworks added
- IIO driver fixes and updates
- lots of tiny coding style cleanups for staging drivers
- vc04_services major reworks and cleanups
We had 3 set of drivers move out of staging in this round as well:
- wilc1000 wireless driver moved out of staging
- speakup moved out of staging
- most USB driver moved out of staging
Full details are in the shortlog.
All of these have been in linux-next with no reported issues. The last
few changes here were to resolve reported linux-next issues, and they
seem to have resolved the problems"
* tag 'staging-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (428 commits)
staging: most: fix up movement of USB driver
staging: rts5208: clear alignment style issues
staging: r8188eu: replace rtw_netdev_priv define with inline function
staging: netlogic: clear alignment style issues
staging: android: ashmem: Fix lockdep warning for write operation
drivers: most: add USB adapter driver
staging: most: Use %pM format specifier for MAC addresses
staging: ks7010: Use %pM format specifier for MAC addresses
staging: qlge: qlge_dbg: removed comment repition
staging: wfx: Use flex_array_size() helper in memcpy()
staging: rtl8723bs: Align macro definitions
staging: rtl8723bs: Clean up function declations
staging: rtl8723bs: Fix coding style errors
drivers: staging: audio: Fix the missing header file for helper file
staging: greybus: audio: Enable GB codec, audio module compilation.
staging: greybus: audio: Add helper APIs for dynamic audio modules
staging: greybus: audio: Resolve compilation error in topology parser
staging: greybus: audio: Resolve compilation errors for GB codec module
staging: greybus: audio: Maintain jack list within GB Audio module
staging: greybus: audio: Update snd_jack FW usage as per new APIs
...
Okay, so... this one is interesting. RGB LEDs are very common, and we
need to have some kind of support for them. Multicolor is for
arbitrary set of LEDs in one package, RGB is for LEDs that can produce
full range of colors. We do not have real multicolor LED that is not
RGB in the pipeline, so that one is disabled for now.
You can expect this saga to continue with next pull requests.
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQRPfPO7r0eAhk010v0w5/Bqldv68gUCXyskqQAKCRAw5/Bqldv6
8ge0AJ9JRTa/0Xkl7JuKUpC93jAnvjpK+ACgsDijb77H5zmtwC8xa0kXiDsbh3E=
=aSJX
-----END PGP SIGNATURE-----
Merge tag 'leds-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds
Pull LED updates from Pavel Machek:
"Okay, so... this one is interesting. RGB LEDs are very common, and we
need to have some kind of support for them. Multicolor is for
arbitrary set of LEDs in one package, RGB is for LEDs that can produce
full range of colors. We do not have real multicolor LED that is not
RGB in the pipeline, so that one is disabled for now.
You can expect this saga to continue with next pull requests"
* tag 'leds-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: (37 commits)
MAINTAINERS: Remove myself as LED subsystem maintainer
leds: disallow /sys/class/leds/*:multi:* for now
leds: add RGB color option, as that is different from multicolor.
Make LEDS_LP55XX_COMMON depend on I2C to fix build errors:
Documentation: ABI: leds-turris-omnia: document sysfs attribute
leds: initial support for Turris Omnia LEDs
dt-bindings: leds: add cznic,turris-omnia-leds binding
leds: pattern trigger -- check pattern for validity
leds: Replace HTTP links with HTTPS ones
leds: trigger: add support for LED-private device triggers
leds: lp5521: Add multicolor framework multicolor brightness support
leds: lp5523: Update the lp5523 code to add multicolor brightness function
leds: lp55xx: Add multicolor framework support to lp55xx
leds: lp55xx: Convert LED class registration to devm_*
dt-bindings: leds: Convert leds-lp55xx to yaml
leds: multicolor: Introduce a multicolor class definition
leds: Add multicolor ID to the color ID list
dt: bindings: Add multicolor class dt bindings documention
leds: lp5523: Fix various formatting issues in the code
leds: lp55xx: Fix file permissions to use DEVICE_ATTR macros
...
Here is the large set of USB and Thunderbolt patches for 5.9-rc1.
Nothing really magic/major in here, just lots of little changes and
updates:
- clean up language usages in USB core and some drivers
- Thunderbolt driver updates and additions
- USB Gadget driver updates
- dwc3 driver updates (like always...)
- build with "W=1" warning fixups
- mtu3 driver updates
- usb-serial driver updates and device ids
- typec additions and updates for new hardware
- xhci debug code updates for future platforms
- cdns3 driver updates
- lots of other minor driver updates and fixes and cleanups
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXymciA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylVVwCfU7JxgjFhAJTzC9K5efVqsrSHzxQAnijHrqUn
pHgI9M1ZRVGwmv2RNWb3
=9/8I
-----END PGP SIGNATURE-----
Merge tag 'usb-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt updates from Greg KH:
"Here is the large set of USB and Thunderbolt patches for 5.9-rc1.
Nothing really magic/major in here, just lots of little changes and
updates:
- clean up language usages in USB core and some drivers
- Thunderbolt driver updates and additions
- USB Gadget driver updates
- dwc3 driver updates (like always...)
- build with "W=1" warning fixups
- mtu3 driver updates
- usb-serial driver updates and device ids
- typec additions and updates for new hardware
- xhci debug code updates for future platforms
- cdns3 driver updates
- lots of other minor driver updates and fixes and cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (330 commits)
usb: common: usb-conn-gpio: Register charger
usb: mtu3: simplify mtu3_req_complete()
usb: mtu3: clear dual mode of u3port when disable device
usb: mtu3: use MTU3_EP_WEDGE flag
usb: mtu3: remove useless member @busy in mtu3_ep struct
usb: mtu3: remove repeated error log
usb: mtu3: add ->udc_set_speed()
usb: mtu3: introduce a funtion to check maximum speed
usb: mtu3: clear interrupts status when disable interrupts
usb: mtu3: reinitialize CSR registers
usb: mtu3: fix macro for maximum number of packets
usb: mtu3: remove unnecessary pointer checks
usb: xhci: Fix ASMedia ASM1142 DMA addressing
usb: xhci: define IDs for various ASMedia host controllers
usb: musb: convert to devm_platform_ioremap_resource_byname
usb: gadget: tegra-xudc: convert to devm_platform_ioremap_resource_byname
usb: gadget: r8a66597: convert to devm_platform_ioremap_resource_byname
usb: dwc3: convert to devm_platform_ioremap_resource_byname
usb: cdns3: convert to devm_platform_ioremap_resource_byname
usb: phy: am335x: convert to devm_platform_ioremap_resource_byname
...
Here is the "big" set of changes to the driver core, and some drivers
using the changes, for 5.9-rc1.
"Biggest" thing in here is the device link exposure in sysfs, to help
to tame the madness that is SoC device tree representations and driver
interactions with it.
Other stuff in here that is interesting is:
- device probe log helper so that drivers can report problems in
a unified way easier.
- devres functions added
- DEVICE_ATTR_ADMIN_* macro added to make it harder to write
incorrect sysfs file permissions
- documentation cleanups
- ability for debugfs to be present in the kernel, yet not
exposed to userspace. Needed for systems that want it
enabled, but do not trust users, so they can still use some
kernel functions that were otherwise disabled.
- other minor fixes and cleanups
The patches outside of drivers/base/ all have acks from the respective
subsystem maintainers to go through this tree instead of theirs.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXylhOQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylGdACeKqxm8IIDZycj0QjLUlPiEwVIROgAnjpf5jAB
mb4jMvgEGsB6/FwxypPG
=RUss
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the "big" set of changes to the driver core, and some drivers
using the changes, for 5.9-rc1.
"Biggest" thing in here is the device link exposure in sysfs, to help
to tame the madness that is SoC device tree representations and driver
interactions with it.
Other stuff in here that is interesting is:
- device probe log helper so that drivers can report problems in a
unified way easier.
- devres functions added
- DEVICE_ATTR_ADMIN_* macro added to make it harder to write
incorrect sysfs file permissions
- documentation cleanups
- ability for debugfs to be present in the kernel, yet not exposed to
userspace. Needed for systems that want it enabled, but do not
trust users, so they can still use some kernel functions that were
otherwise disabled.
- other minor fixes and cleanups
The patches outside of drivers/base/ all have acks from the respective
subsystem maintainers to go through this tree instead of theirs.
All of these have been in linux-next with no reported issues"
* tag 'driver-core-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (39 commits)
drm/bridge: lvds-codec: simplify error handling
drm/bridge/sii8620: fix resource acquisition error handling
driver core: add deferring probe reason to devices_deferred property
driver core: add device probe log helper
driver core: Avoid binding drivers to dead devices
Revert "test_firmware: Test platform fw loading on non-EFI systems"
firmware_loader: EFI firmware loader must handle pre-allocated buffer
selftest/firmware: Add selftest timeout in settings
test_firmware: Test platform fw loading on non-EFI systems
driver core: Change delimiter in devlink device's name to "--"
debugfs: Add access restriction option
tracefs: Remove unnecessary debug_fs checks.
driver core: Fix probe_count imbalance in really_probe()
kobject: remove unused KOBJ_MAX action
driver core: Fix sleeping in invalid context during device link deletion
driver core: Add waiting_for_supplier sysfs file for devices
driver core: Add state_synced sysfs file for devices that support it
driver core: Expose device link details in sysfs
driver core: Drop mention of obsolete bus rwsem from kernel-doc
debugfs: file: Remove unnecessary cast in kfree()
...
Here is the large set of char and misc and other driver subsystem
patches for 5.9-rc1. Lots of new driver submissions in here, and
cleanups and features for existing drivers.
Highlights are:
- habanalabs driver updates
- coresight driver updates
- nvmem driver updates
- huge number of "W=1" build warning cleanups from Lee Jones
- dyndbg updates
- virtbox driver fixes and updates
- soundwire driver updates
- mei driver updates
- phy driver updates
- fpga driver updates
- lots of smaller individual misc/char driver cleanups and fixes
Full details are in the shortlog.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXylccQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymofgCfZ1CxNWd0ZVM0YIn8cY9gO6ON7MsAnRq48hvn
Vjf4rKM73GC11bVF4Gyy
=Xq1R
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char and misc and other driver subsystem
patches for 5.9-rc1. Lots of new driver submissions in here, and
cleanups and features for existing drivers.
Highlights are:
- habanalabs driver updates
- coresight driver updates
- nvmem driver updates
- huge number of "W=1" build warning cleanups from Lee Jones
- dyndbg updates
- virtbox driver fixes and updates
- soundwire driver updates
- mei driver updates
- phy driver updates
- fpga driver updates
- lots of smaller individual misc/char driver cleanups and fixes
Full details are in the shortlog.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (322 commits)
habanalabs: remove unused but set variable 'ctx_asid'
nvmem: qcom-spmi-sdam: Enable multiple devices
dt-bindings: nvmem: SID: add binding for A100's SID controller
nvmem: update Kconfig description
nvmem: qfprom: Add fuse blowing support
dt-bindings: nvmem: Add properties needed for blowing fuses
dt-bindings: nvmem: qfprom: Convert to yaml
nvmem: qfprom: use NVMEM_DEVID_AUTO for multiple instances
nvmem: core: add support to auto devid
nvmem: core: Add nvmem_cell_read_u8()
nvmem: core: Grammar fixes for help text
nvmem: sc27xx: add sc2730 efuse support
nvmem: Enforce nvmem stride in the sysfs interface
MAINTAINERS: Add git tree for NVMEM FRAMEWORK
nvmem: sprd: Fix return value of sprd_efuse_probe()
drivers: android: Fix the SPDX comment style
drivers: android: Fix a variable declaration coding style issue
drivers: android: Remove braces for a single statement if-else block
drivers: android: Remove the use of else after return
drivers: android: Fix a variable declaration coding style issue
...
-----BEGIN PGP SIGNATURE-----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=oADH
-----END PGP SIGNATURE-----
Merge tag 'for-5.9/drivers-20200803' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
- NVMe:
- ZNS support (Aravind, Keith, Matias, Niklas)
- Misc cleanups, optimizations, fixes (Baolin, Chaitanya, David,
Dongli, Max, Sagi)
- null_blk zone capacity support (Aravind)
- MD:
- raid5/6 fixes (ChangSyun)
- Warning fixes (Damien)
- raid5 stripe fixes (Guoqing, Song, Yufen)
- sysfs deadlock fix (Junxiao)
- raid10 deadlock fix (Vitaly)
- struct_size conversions (Gustavo)
- Set of bcache updates/fixes (Coly)
* tag 'for-5.9/drivers-20200803' of git://git.kernel.dk/linux-block: (117 commits)
md/raid5: Allow degraded raid6 to do rmw
md/raid5: Fix Force reconstruct-write io stuck in degraded raid5
raid5: don't duplicate code for different paths in handle_stripe
raid5-cache: hold spinlock instead of mutex in r5c_journal_mode_show
md: print errno in super_written
md/raid5: remove the redundant setting of STRIPE_HANDLE
md: register new md sysfs file 'uuid' read-only
md: fix max sectors calculation for super 1.0
nvme-loop: remove extra variable in create ctrl
nvme-loop: set ctrl state connecting after init
nvme-multipath: do not fall back to __nvme_find_path() for non-optimized paths
nvme-multipath: fix logic for non-optimized paths
nvme-rdma: fix controller reset hang during traffic
nvme-tcp: fix controller reset hang during traffic
nvmet: introduce the passthru Kconfig option
nvmet: introduce the passthru configfs interface
nvmet: Add passthru enable/disable helpers
nvmet: add passthru code to process commands
nvme: export nvme_find_get_ns() and nvme_put_ns()
nvme: introduce nvme_ctrl_get_by_path()
...
while to come. Changes include:
- Some new Chinese translations
- Progress on the battle against double words words and non-HTTPS URLs
- Some block-mq documentation
- More RST conversions from Mauro. At this point, that task is
essentially complete, so we shouldn't see this kind of churn again for a
while. Unless we decide to switch to asciidoc or something...:)
- Lots of typo fixes, warning fixes, and more.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl8oVkwPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YoW8H/jJ/xnXFn7tkgVPQAlL3k5HCnK7A5nDP9RVR
cg1pTx1cEFdjzxPlJyExU6/v+AImOvtweHXC+JDK7YcJ6XFUNYXJI3LxL5KwUXbY
BL/xRFszDSXH2C7SJF5GECcFYp01e/FWSLN3yWAh+g+XwsKiTJ8q9+CoIDkHfPGO
7oQsHKFu6s36Af0LfSgxk4sVB7EJbo8e4psuPsP5SUrl+oXRO43Put0rXkR4yJoH
9oOaB51Do5fZp8I4JVAqGXvpXoExyLMO4yw0mASm6YSZ3KyjR8Fae+HD9Cq4ZuwY
0uzb9K+9NEhqbfwtyBsi99S64/6Zo/MonwKwevZuhtsDTK4l4iU=
=JQLZ
-----END PGP SIGNATURE-----
Merge tag 'docs-5.9' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It's been a busy cycle for documentation - hopefully the busiest for a
while to come. Changes include:
- Some new Chinese translations
- Progress on the battle against double words words and non-HTTPS
URLs
- Some block-mq documentation
- More RST conversions from Mauro. At this point, that task is
essentially complete, so we shouldn't see this kind of churn again
for a while. Unless we decide to switch to asciidoc or
something...:)
- Lots of typo fixes, warning fixes, and more"
* tag 'docs-5.9' of git://git.lwn.net/linux: (195 commits)
scripts/kernel-doc: optionally treat warnings as errors
docs: ia64: correct typo
mailmap: add entry for <alobakin@marvell.com>
doc/zh_CN: add cpu-load Chinese version
Documentation/admin-guide: tainted-kernels: fix spelling mistake
MAINTAINERS: adjust kprobes.rst entry to new location
devices.txt: document rfkill allocation
PCI: correct flag name
docs: filesystems: vfs: correct flag name
docs: filesystems: vfs: correct sync_mode flag names
docs: path-lookup: markup fixes for emphasis
docs: path-lookup: more markup fixes
docs: path-lookup: fix HTML entity mojibake
CREDITS: Replace HTTP links with HTTPS ones
docs: process: Add an example for creating a fixes tag
doc/zh_CN: add Chinese translation prefer section
doc/zh_CN: add clearing-warn-once Chinese version
doc/zh_CN: add admin-guide index
doc:it_IT: process: coding-style.rst: Correct __maybe_unused compiler label
futex: MAINTAINERS: Re-add selftests directory
...
-----BEGIN PGP SIGNATURE-----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=ZcMq
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Herbert Xu made printk header file self-contained.
- Andy Shevchenko and Sergey Senozhatsky cleaned up console->setup()
error handling.
- Andy Shevchenko did some cleanups (e.g. sparse warning) in vsprintf
code.
- Minor documentation updates.
* tag 'printk-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
lib/vsprintf: Force type of flags value for gfp_t
lib/vsprintf: Replace custom spec to print decimals with generic one
lib/vsprintf: Replace hidden BUILD_BUG_ON() with static_assert()
printk: Make linux/printk.h self-contained
doc:kmsg: explicitly state the return value in case of SEEK_CUR
Replace HTTP links with HTTPS ones: vsprintf
hvc: unify console setup naming
console: Fix trivia typo 'change' -> 'chance'
console: Propagate error code from console ->setup()
tty: hvc: Return proper error code from console ->setup() hook
serial: sunzilog: Return proper error code from console ->setup() hook
serial: sunsab: Return proper error code from console ->setup() hook
mips: Return proper error code from console ->setup() hook
- Make the Energy Model cover non-CPU devices (Lukasz Luba).
- Add Ice Lake server idle states table to the intel_idle driver
and eliminate a redundant static variable from it (Chen Yu,
Rafael Wysocki).
- Eliminate all W=1 build warnings from cpufreq (Lee Jones).
- Add support for Sapphire Rapids and for Power Limit 4 to the
Intel RAPL power capping driver (Sumeet Pawnikar, Zhang Rui).
- Fix function name in kerneldoc comments in the idle_inject power
capping driver (Yangtao Li).
- Fix locking issues with cpufreq governors and drop a redundant
"weak" function definition from cpufreq (Viresh Kumar).
- Rearrange cpufreq to register non-modular governors at the
core_initcall level and allow the default cpufreq governor to
be specified in the kernel command line (Quentin Perret).
- Extend, fix and clean up the intel_pstate driver (Srinivas
Pandruvada, Rafael Wysocki):
* Add a new sysfs attribute for disabling/enabling CPU
energy-efficiency optimizations in the processor.
* Make the driver avoid enabling HWP if EPP is not supported.
* Allow the driver to handle numeric EPP values in the sysfs
interface and fix the setting of EPP via sysfs in the active
mode.
* Eliminate a static checker warning and clean up a kerneldoc
comment.
- Clean up some variable declarations in the powernv cpufreq
driver (Wei Yongjun).
- Fix up the ->enter_s2idle callback definition to cover the case
when it points to the same function as ->idle correctly (Neal
Liu).
- Rearrange and clean up the PSCI cpuidle driver (Ulf Hansson).
- Make the PM core emit "changed" uevent when adding/removing the
"wakeup" sysfs attribute of devices (Abhishek Pandit-Subedi).
- Add a helper macro for declaring PM callbacks and use it in the
MMC jz4740 driver (Paul Cercueil).
- Fix white space in some places in the hibernate code and make the
system-wide PM code use "const char *" where appropriate (Xiang
Chen, Alexey Dobriyan).
- Add one more "unsafe" helper macro to the freezer to cover the NFS
use case (He Zhe).
- Change the language in the generic PM domains framework to use
parent/child terminology and clean up a typo and some comment
fromatting in that code (Kees Cook, Geert Uytterhoeven).
- Update the operating performance points OPP framework (Lukasz
Luba, Andrew-sh.Cheng, Valdis Kletnieks):
* Refactor dev_pm_opp_of_register_em() and update related drivers.
* Add a missing function export.
* Allow disabled OPPs in dev_pm_opp_get_freq().
- Update devfreq core and drivers (Chanwoo Choi, Lukasz Luba, Enric
Balletbo i Serra, Dmitry Osipenko, Kieran Bingham, Marc Zyngier):
* Add support for delayed timers to the devfreq core and make the
Samsung exynos5422-dmc driver use it.
* Unify sysfs interface to use "df-" as a prefix in instance names
consistently.
* Fix devfreq_summary debugfs node indentation.
* Add the rockchip,pmu phandle to the rk3399_dmc driver DT
bindings.
* List Dmitry Osipenko as the Tegra devfreq driver maintainer.
* Fix typos in the core devfreq code.
- Update the pm-graph utility to version 5.7 including a number of
fixes related to suspend-to-idle (Todd Brandt).
- Fix coccicheck errors and warnings in the cpupower utility (Shuah
Khan).
- Replace HTTP links with HTTPs ones in multiple places (Alexander
A. Klimov).
-----BEGIN PGP SIGNATURE-----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=8cUO
-----END PGP SIGNATURE-----
Merge tag 'pm-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"The most significant change here is the extension of the Energy Model
to cover non-CPU devices (as well as CPUs) from Lukasz Luba.
There is also some new hardware support (Ice Lake server idle states
table for intel_idle, Sapphire Rapids and Power Limit 4 support in the
RAPL driver), some new functionality in the existing drivers (eg. a
new switch to disable/enable CPU energy-efficiency optimizations in
intel_pstate, delayed timers in devfreq), some assorted fixes (cpufreq
core, intel_pstate, intel_idle) and cleanups (eg. cpuidle-psci,
devfreq), including the elimination of W=1 build warnings from cpufreq
done by Lee Jones.
Specifics:
- Make the Energy Model cover non-CPU devices (Lukasz Luba).
- Add Ice Lake server idle states table to the intel_idle driver and
eliminate a redundant static variable from it (Chen Yu, Rafael
Wysocki).
- Eliminate all W=1 build warnings from cpufreq (Lee Jones).
- Add support for Sapphire Rapids and for Power Limit 4 to the Intel
RAPL power capping driver (Sumeet Pawnikar, Zhang Rui).
- Fix function name in kerneldoc comments in the idle_inject power
capping driver (Yangtao Li).
- Fix locking issues with cpufreq governors and drop a redundant
"weak" function definition from cpufreq (Viresh Kumar).
- Rearrange cpufreq to register non-modular governors at the
core_initcall level and allow the default cpufreq governor to be
specified in the kernel command line (Quentin Perret).
- Extend, fix and clean up the intel_pstate driver (Srinivas
Pandruvada, Rafael Wysocki):
* Add a new sysfs attribute for disabling/enabling CPU
energy-efficiency optimizations in the processor.
* Make the driver avoid enabling HWP if EPP is not supported.
* Allow the driver to handle numeric EPP values in the sysfs
interface and fix the setting of EPP via sysfs in the active
mode.
* Eliminate a static checker warning and clean up a kerneldoc
comment.
- Clean up some variable declarations in the powernv cpufreq driver
(Wei Yongjun).
- Fix up the ->enter_s2idle callback definition to cover the case
when it points to the same function as ->idle correctly (Neal Liu).
- Rearrange and clean up the PSCI cpuidle driver (Ulf Hansson).
- Make the PM core emit "changed" uevent when adding/removing the
"wakeup" sysfs attribute of devices (Abhishek Pandit-Subedi).
- Add a helper macro for declaring PM callbacks and use it in the MMC
jz4740 driver (Paul Cercueil).
- Fix white space in some places in the hibernate code and make the
system-wide PM code use "const char *" where appropriate (Xiang
Chen, Alexey Dobriyan).
- Add one more "unsafe" helper macro to the freezer to cover the NFS
use case (He Zhe).
- Change the language in the generic PM domains framework to use
parent/child terminology and clean up a typo and some comment
fromatting in that code (Kees Cook, Geert Uytterhoeven).
- Update the operating performance points OPP framework (Lukasz Luba,
Andrew-sh.Cheng, Valdis Kletnieks):
* Refactor dev_pm_opp_of_register_em() and update related drivers.
* Add a missing function export.
* Allow disabled OPPs in dev_pm_opp_get_freq().
- Update devfreq core and drivers (Chanwoo Choi, Lukasz Luba, Enric
Balletbo i Serra, Dmitry Osipenko, Kieran Bingham, Marc Zyngier):
* Add support for delayed timers to the devfreq core and make the
Samsung exynos5422-dmc driver use it.
* Unify sysfs interface to use "df-" as a prefix in instance
names consistently.
* Fix devfreq_summary debugfs node indentation.
* Add the rockchip,pmu phandle to the rk3399_dmc driver DT
bindings.
* List Dmitry Osipenko as the Tegra devfreq driver maintainer.
* Fix typos in the core devfreq code.
- Update the pm-graph utility to version 5.7 including a number of
fixes related to suspend-to-idle (Todd Brandt).
- Fix coccicheck errors and warnings in the cpupower utility (Shuah
Khan).
- Replace HTTP links with HTTPs ones in multiple places (Alexander A.
Klimov)"
* tag 'pm-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (71 commits)
cpuidle: ACPI: fix 'return' with no value build warning
cpufreq: intel_pstate: Fix EPP setting via sysfs in active mode
cpufreq: intel_pstate: Rearrange the storing of new EPP values
intel_idle: Customize IceLake server support
PM / devfreq: Fix the wrong end with semicolon
PM / devfreq: Fix indentaion of devfreq_summary debugfs node
PM / devfreq: Clean up the devfreq instance name in sysfs attr
memory: samsung: exynos5422-dmc: Add module param to control IRQ mode
memory: samsung: exynos5422-dmc: Adjust polling interval and uptreshold
memory: samsung: exynos5422-dmc: Use delayed timer as default
PM / devfreq: Add support delayed timer for polling mode
dt-bindings: devfreq: rk3399_dmc: Add rockchip,pmu phandle
PM / devfreq: tegra: Add Dmitry as a maintainer
PM / devfreq: event: Fix trivial spelling
PM / devfreq: rk3399_dmc: Fix kernel oops when rockchip,pmu is absent
cpuidle: change enter_s2idle() prototype
cpuidle: psci: Prevent domain idlestates until consumers are ready
cpuidle: psci: Convert PM domain to platform driver
cpuidle: psci: Fix error path via converting to a platform driver
cpuidle: psci: Fail cpuidle registration if set OSI mode failed
...
A couple of subsystems have their own subsystem maintainers but choose
to have the code merged through the soc tree as upstream, as the code
tends to be used across multiple SoCs or has SoC specific drivers itself:
- memory controllers:
Krzysztof Kozlowski takes ownership of the drivers/memory
subsystem and its drivers, starting out with a set of cleanup
patches.
A larger driver for the Tegra memory controller that was accidentally
missed for v5.8 is now added.
- reset controllers:
Only minor updates to drivers/reset this time
- firmware:
The "turris mox" firmware driver gains support for signed firmware blobs
The tegra firmware driver gets extended to export some debug information
Various updates to i.MX firmware drivers, mostly cosmetic
- ARM SCMI/SCPI:
A new mechanism for platform notifications is added, among a number
of minor changes.
- optee:
Probing of the TEE bus is rewritten to better support detection of
devices that depend on the tee-supplicant user space.
A new firmware based trusted platform module (fTPM) driver is added
based on OP-TEE
- SoC attributes:
A new driver is added to provide a generic soc_device for identifying
a machine through the SMCCC ARCH_SOC_ID firmware interface rather than
by probing SoC family specific registers.
The series also contains some cleanups to the common soc_device code.
There are also a number of updates to SoC specific drivers,
the main ones are:
- Mediatek cmdq driver gains a few in-kernel interfaces
- Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding
support for additional SoC variants
- The Qualcomm GENI core code gains interconnect path voting and
performance level support, and integrating this into a number of
device drivers.
- A new driver for Samsung Exynos5800 voltage coupler for
- Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC
specific device drivers
- Updates to the TI K3 Ring Accelerator driver
-----BEGIN PGP SIGNATURE-----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=nezz
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"A couple of subsystems have their own subsystem maintainers but choose
to have the code merged through the soc tree as upstream, as the code
tends to be used across multiple SoCs or has SoC specific drivers
itself:
- memory controllers:
Krzysztof Kozlowski takes ownership of the drivers/memory subsystem
and its drivers, starting out with a set of cleanup patches.
A larger driver for the Tegra memory controller that was
accidentally missed for v5.8 is now added.
- reset controllers:
Only minor updates to drivers/reset this time
- firmware:
The "turris mox" firmware driver gains support for signed firmware
blobs The tegra firmware driver gets extended to export some debug
information Various updates to i.MX firmware drivers, mostly
cosmetic
- ARM SCMI/SCPI:
A new mechanism for platform notifications is added, among a number
of minor changes.
- optee:
Probing of the TEE bus is rewritten to better support detection of
devices that depend on the tee-supplicant user space. A new
firmware based trusted platform module (fTPM) driver is added based
on OP-TEE
- SoC attributes:
A new driver is added to provide a generic soc_device for
identifying a machine through the SMCCC ARCH_SOC_ID firmware
interface rather than by probing SoC family specific registers.
The series also contains some cleanups to the common soc_device
code.
There are also a number of updates to SoC specific drivers, the main
ones are:
- Mediatek cmdq driver gains a few in-kernel interfaces
- Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding
support for additional SoC variants
- The Qualcomm GENI core code gains interconnect path voting and
performance level support, and integrating this into a number of
device drivers.
- A new driver for Samsung Exynos5800 voltage coupler for
- Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC
specific device drivers
- Updates to the TI K3 Ring Accelerator driver"
* tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (164 commits)
soc: qcom: geni: Fix unused label warning
soc: qcom: smd-rpm: Fix kerneldoc
memory: jz4780_nemc: Only request IO memory the driver will use
soc: qcom: pdr: Reorder the PD state indication ack
MAINTAINERS: Add Git repository for memory controller drivers
memory: brcmstb_dpfe: Fix language typo
memory: samsung: exynos5422-dmc: Correct white space issues
memory: samsung: exynos-srom: Correct alignment
memory: pl172: Enclose macro argument usage in parenthesis
memory: of: Correct kerneldoc
memory: omap-gpmc: Fix language typo
memory: omap-gpmc: Correct white space issues
memory: omap-gpmc: Use 'unsigned int' for consistency
memory: omap-gpmc: Enclose macro argument usage in parenthesis
memory: omap-gpmc: Correct kerneldoc
memory: mvebu-devbus: Align with open parenthesis
memory: mvebu-devbus: Add missing braces to all arms of if statement
memory: bt1-l2-ctl: Add blank lines after declarations
soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static
firmware: ti_sci: Replace HTTP links with HTTPS ones
...
* ASUS WMI driver honors BAT1 name of the battery
(quite a few new laptops are using it)
* Dell WMI driver supports new key codes and backlight events
* ThinkPad ACPI driver now may use standard charge threshold interface,
it also has been updated to provide Laptop or Desktop mode to the user
* Intel Speed Select Technology gained support on Sapphire Rapids platform
* Regular update of Speed Select Technology tools
* Mellanox has been updated to support complex attributes
* PMC core driver has been fixed to show correct names for LPM0 register
* HTTP links were replaced by HTTPS ones where it applies
* Miscellaneous fixes and cleanups here and there
The following is an automated git shortlog grouped by driver:
acerhdf:
- Replace HTTP links with HTTPS ones
Add new intel_atomisp2_led driver:
- Add new intel_atomisp2_led driver
apple-gmux:
- Replace HTTP links with HTTPS ones
asus-nb-wmi:
- Drop duplicate DMI quirk structures
- add support for ASUS ROG Zephyrus G14 and G15
asus-wmi:
- allow BAT1 battery name
dell-wmi:
- add new dmi mapping for keycode 0xffff
- add new keymap type 0x0012
- add new backlight events
intel_cht_int33fe:
- Drop double check for ACPI companion device
intel-hid:
- Fix return value check in check_acpi_dev()
intel_pmc_core:
- fix bound check in pmc_core_mphy_pg_show()
- update TGL's LPM0 reg bit map name
intel-vbtn:
- Fix return value check in check_acpi_dev()
ISST:
- drop a duplicated word in isst_if.h
- Add new PCI device ids
pcengines-apuv2:
- revert wiring up simswitch GPIO as LED
platform/mellanox:
- Introduce string_upper() and string_lower() helpers
- Add string_upper() and string_lower() tests
- Extend FAN platform data description
- Add more definitions for system attributes
- Add new attribute for mlxreg-io sysfs interfaces
- Add presence register field for FAN devices
- Add support for complex attributes
- mlxreg-io: Add support for complex attributes
- mlxreg-hotplug: Add environmental data to uevent
- mlxreg-hotplug: Use capability register for attribute creation
- mlxreg-hotplug: Modify module license
system76-acpi:
- Fix brightness_set schedule while atomic
thinkpad_acpi:
- Make some symbols static
- add documentation for battery charge control
- use standard charge control attribute names
- remove unused defines
- Replace HTTP links with HTTPS ones
- not loading brightness_init when _BCL invalid
- lap or desk mode interface
- Revert "Use strndup_user() in dispatch_proc_write()"
tools/power/x86/intel-speed-select:
- Update version for v5.9
- Add retries for mail box commands
- Add option to delay mbox commands
- Ignore -o option processing on error
- Change path for caching topology info
-----BEGIN PGP SIGNATURE-----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=yvnW
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.9-1' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Andy Shevchenko:
- ASUS WMI driver honors BAT1 name of the battery (quite a few new
laptops are using it)
- Dell WMI driver supports new key codes and backlight events
- ThinkPad ACPI driver now may use standard charge threshold interface,
it also has been updated to provide Laptop or Desktop mode to the
user
- Intel Speed Select Technology gained support on Sapphire Rapids
platform
- Regular update of Speed Select Technology tools
- Mellanox has been updated to support complex attributes
- PMC core driver has been fixed to show correct names for LPM0
register
- HTTP links were replaced by HTTPS ones where it applies
- Miscellaneous fixes and cleanups here and there
* tag 'platform-drivers-x86-v5.9-1' of git://git.infradead.org/linux-platform-drivers-x86: (42 commits)
platform/x86: asus-nb-wmi: Drop duplicate DMI quirk structures
platform/x86: thinkpad_acpi: Make some symbols static
platform/x86: thinkpad_acpi: add documentation for battery charge control
platform/x86: thinkpad_acpi: use standard charge control attribute names
platform/x86: thinkpad_acpi: remove unused defines
platform/x86: ISST: drop a duplicated word in isst_if.h
tools/power/x86/intel-speed-select: Update version for v5.9
tools/power/x86/intel-speed-select: Add retries for mail box commands
tools/power/x86/intel-speed-select: Add option to delay mbox commands
tools/power/x86/intel-speed-select: Ignore -o option processing on error
tools/power/x86/intel-speed-select: Change path for caching topology info
platform/x86: acerhdf: Replace HTTP links with HTTPS ones
platform/x86: apple-gmux: Replace HTTP links with HTTPS ones
platform/x86: pcengines-apuv2: revert wiring up simswitch GPIO as LED
platform/x86: mlx-platform: Extend FAN platform data description
platform_data/mlxreg: Add presence register field for FAN devices
Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
platform/mellanox: mlxreg-io: Add support for complex attributes
platform/x86: mlx-platform: Add more definitions for system attributes
platform_data/mlxreg: Add support for complex attributes
...
Update papr_scm.c to query dimm performance statistics from PHYP via
H_SCM_PERFORMANCE_STATS hcall and export them to user-space as PAPR
specific NVDIMM attribute 'perf_stats' in sysfs. The patch also
provide a sysfs ABI documentation for the stats being reported and
their meanings.
During NVDIMM probe time in papr_scm_nvdimm_init() a special variant
of H_SCM_PERFORMANCE_STATS hcall is issued to check if collection of
performance statistics is supported or not. If successful then a PHYP
returns a maximum possible buffer length needed to read all
performance stats. This returned value is stored in a per-nvdimm
attribute 'stat_buffer_len'.
The layout of request buffer for reading NVDIMM performance stats from
PHYP is defined in 'struct papr_scm_perf_stats' and 'struct
papr_scm_perf_stat'. These structs are used in newly introduced
drc_pmem_query_stats() that issues the H_SCM_PERFORMANCE_STATS hcall.
The sysfs access function perf_stats_show() uses value
'stat_buffer_len' to allocate a buffer large enough to hold all
possible NVDIMM performance stats and passes it to
drc_pmem_query_stats() to populate. Finally statistics reported in the
buffer are formatted into the sysfs access function output buffer.
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200731064153.182203-2-vaibhav@linux.ibm.com
This is a long life mode set in the factory for extended warranty
battery, the power charging rate is customized so that battery at
work last longer.
Presently switching to a different battery charging mode is through
EC PID 0x0710 to configure the battery firmware, this operation will
be blocked by EC with failure code 0x01 when PLL mode is already
in use.
Signed-off-by: Crag Wang <crag.wang@dell.com>
Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Until now, the devfreq driver using polling mode like simple_ondemand
governor have used only deferrable timer for reducing the redundant
power consumption. It reduces the CPU wake-up from idle due to polling mode
which check the status of Non-CPU device.
But, it has a problem for Non-CPU device like DMC device with DMA operation.
Some Non-CPU device need to do monitor continuously regardless of CPU state
in order to decide the proper next status of Non-CPU device.
So, add support the delayed timer for polling mode to support
the repetitive monitoring. The devfreq driver and user can select
the kind of timer on either deferrable and delayed timer.
For example, change the timer type of DMC device
based on Exynos5422-based Odroid-XU3 as following:
- If want to use deferrable timer as following:
echo deferrable > /sys/class/devfreq/10c20000.memory-controller/timer
- If want to use delayed timer as following:
echo delayed > /sys/class/devfreq/10c20000.memory-controller/timer
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Some of the mei device heads are not generic and have
a specific purpose, we need to announce it to the user space
so it is possible to detect the correct device node via
matching attributes.
Generic heads are marked as 'mei' while special purpose heads
have their own names. Currently we are adding 'itouch' string
for Intel IPTS 1.0, 2.0 devices.
This is done via new sysfs attribute 'kind'.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200728192242.3117779-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Plumb the platform specific backend for the generic libnvdimm firmware
activate interface. Register dimm level operations to arm/disarm
activation, and register bus level operations to report the dynamic
platform-quiesce time relative to the number of dimms armed for firmware
activation.
A new nfit-specific bus attribute "firmware_activate_noidle" is added to
allow the activation to switch between platform enforced, and OS
opportunistic device quiesce. In other words, let the hibernate cycle
handle in-flight device-dma rather than the platform attempting to
increase PCI-E timeouts and the like.
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Abstract platform specific mechanics for nvdimm firmware activation
behind a handful of generic ops. At the bus level ->activate_state()
indicates the unified state (idle, busy, armed) of all DIMMs on the bus,
and ->capability() indicates the system state expectations for activate.
At the DIMM level ->activate_state() indicates the per-DIMM state,
->activate_result() indicates the outcome of the last activation
attempt, and ->arm() attempts to transition the DIMM from 'idle' to
'armed'.
A new hibernate_quiet_exec() facility is added to support firmware
activation in an OS defined system quiesce state. It leverages the fact
that the hibernate-freeze state wants to assert that a memory
hibernation snapshot can be taken. This is in contrast to a platform
firmware defined quiesce state that may forcefully quiet the memory
controller independent of whether an individual device-driver properly
supports hibernate-freeze.
The libnvdimm sysfs interface is extended to support detection of a
firmware activate capability. The mechanism supports enumeration and
triggering of firmware activate, optionally in the
hibernate_quiet_exec() context.
[rafael: hibernate_quiet_exec() proposal]
[vishal: fix up sparse warning, grammar in Documentation/]
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Co-developed-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl8d8h4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGd0sH/2iktYhMwPxzzpnb
eI3OuTX/mRn4vUFOfpx9dmGVleMfKkpbvnn3IY7wA62Qfv7J7lkFRa1Bd1DlqXfW
yyGTGDSKG5chiRCOU3s9ni92M4xIzFlrojyt/dIK2lUGMzUPI9FGlZRGQLKqqwLh
2syOXRWbcQ7e52IHtDSy3YBNveKRsP4NyqV+GxGiex18SMB/M3Pw9EMH614eDPsE
QAGQi5uGv4hPJtFHgXgUyBPLFHIyFAiVxhFRIj7u2DSEKY79+wO1CGWFiFvdTY4B
CbqKXLffY3iQdFsLJkj9Dl8cnOQnoY44V0EBzhhORxeOp71StUVaRwQMFa5tp48G
171s5Hs=
=BQIl
-----END PGP SIGNATURE-----
Merge 5.8-rc7 into staging-next
We need the staging fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl8d8h4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGd0sH/2iktYhMwPxzzpnb
eI3OuTX/mRn4vUFOfpx9dmGVleMfKkpbvnn3IY7wA62Qfv7J7lkFRa1Bd1DlqXfW
yyGTGDSKG5chiRCOU3s9ni92M4xIzFlrojyt/dIK2lUGMzUPI9FGlZRGQLKqqwLh
2syOXRWbcQ7e52IHtDSy3YBNveKRsP4NyqV+GxGiex18SMB/M3Pw9EMH614eDPsE
QAGQi5uGv4hPJtFHgXgUyBPLFHIyFAiVxhFRIj7u2DSEKY79+wO1CGWFiFvdTY4B
CbqKXLffY3iQdFsLJkj9Dl8cnOQnoY44V0EBzhhORxeOp71StUVaRwQMFa5tp48G
171s5Hs=
=BQIl
-----END PGP SIGNATURE-----
Merge 5.8-rc7 into usb-next
We want the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The devlink device name is of the form "supplier:consumer". But ":" is
fairly common in device names and makes it visually hard to distinguish
supplier and consumer. So, replace it with "--" to make it easier.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20200724180523.1393383-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For firmware on the Turris MOX (Armada 3720 based board), add support
ECDSA signatures via debugfs.
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXxqgnwAKCRALBhiOFHI7
1aROAJ9xw1KBR6g4InE5NvO3yHy29L12SgCeM0klcfvENUGuhW8pntmqY5c3Zu8=
=4riI
-----END PGP SIGNATURE-----
Merge tag 'mvebu-drivers-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/drivers
mvebu drivers for 5.9 (part 1)
For firmware on the Turris MOX (Armada 3720 based board), add support
ECDSA signatures via debugfs.
* tag 'mvebu-drivers-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
firmware: turris-mox-rwtm: add debugfs documentation
firmware: turris-mox-rwtm: support ECDSA signatures via debugfs
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Document the global brightness attribute for the Turris Omnia LED
controller.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Introduce a multicolor class that groups colored LEDs
within a LED node.
The multicolor class groups monochrome LEDs and allows controlling two
aspects of the final combined color: hue and lightness. The former is
controlled via the intensity file and the latter is controlled
via brightness file.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
[squashed leds: multicolor: Fix camel case in documentation in]
Add HEALTH_WARM, HEALTH_COOL and HEALTH_HOT to the health enum.
HEALTH_WARM, HEALTH_COOL, and HEALTH_HOT properties are taken
from JEITA specification JISC8712:2015
Acked-by: Andrew F. Davis <afd@ti.com>
Tested-by: Guru Das Srinagesh <gurus@codeaurora.org>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This includes following Thunderbolt/USB4 changes for v5.9 merge window:
* Improvements around NHI (Native Host Interface) HopID allocation
* Improvements to tunneling and USB3 bandwidth management support
* Add KUnit tests for path walking and tunneling
* Initial support for USB4 retimer firmware upgrade
* Implement Thunderbolt device firmware upgrade mechanism that runs
the NVM image authentication when the device is disconnected.
* A couple of small non-critical fixes
-----BEGIN PGP SIGNATURE-----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=FHld
-----END PGP SIGNATURE-----
Merge tag 'thunderbolt-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
thunderbolt: Changes for v5.9 merge window
This includes following Thunderbolt/USB4 changes for v5.9 merge window:
* Improvements around NHI (Native Host Interface) HopID allocation
* Improvements to tunneling and USB3 bandwidth management support
* Add KUnit tests for path walking and tunneling
* Initial support for USB4 retimer firmware upgrade
* Implement Thunderbolt device firmware upgrade mechanism that runs
the NVM image authentication when the device is disconnected.
* A couple of small non-critical fixes
* tag 'thunderbolt-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: (32 commits)
thunderbolt: Fix old style declaration warning
thunderbolt: Add support for authenticate on disconnect
thunderbolt: Add support for separating the flush to SPI and authenticate
thunderbolt: Ensure left shift of 512 does not overflow a 32 bit int
thunderbolt: Add support for on-board retimers
thunderbolt: Implement USB4 port sideband operations for retimer access
thunderbolt: Retry USB4 block read operation
thunderbolt: Generalize usb4_switch_do_[read|write]_data()
thunderbolt: Split common NVM functionality into a separate file
thunderbolt: Add Intel USB-IF ID to the NVM upgrade supported list
thunderbolt: Add KUnit tests for tunneling
thunderbolt: Add USB3 bandwidth management
thunderbolt: Make tb_port_get_link_speed() available to other files
thunderbolt: Implement USB3 bandwidth negotiation routines
thunderbolt: Increase DP DPRX wait timeout
thunderbolt: Report consumed bandwidth in both directions
thunderbolt: Make usb4_switch_map_pcie_down() also return enabled ports
thunderbolt: Make usb4_switch_map_usb3_down() also return enabled ports
thunderbolt: Do not tunnel USB3 if link is not USB4
thunderbolt: Add DP IN resources for all routers
...
Add debugfs ABI documentation for the ECDSA signatures.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Some new devices, but particularly good this time is the core rework coming
from Alexandru. Some of this has been in Analog's tree a long time, but other
parts are motivated by closing down common mistakes in new drivers.
Changes since first try at this pull request:
* Add missed patch to actually remove iio_priv_to_dev and as a result
also drop a few ingenic patches that need to be updated to take this
into account.
* Fix an ordering issue int he pollfunc attach in the core rework.
New device support
* qcom pmic7 adc
- New driver using common qcom-vadc library. Some associated cleanups and
refactors.
* invensense icm42600
- New driver supporting icm42600, icm42602, icm42605 and icm42622 via i2c
or spi. These are all 6 axis IMUs with gyro and accelerometers.
Driver supports buffered modes using the hardware fifo and interpolation
for accurate timestamps.
* sensirion scd30
- New driver for this carbon dioxide sensor including i2c and serial
interfaces + bindings.
Features
* ak8975
- Add reset gpio support.
* bma400
- Support SPI.
* bmc150
- Document and add support for bmc156b and bmm150b, tidy up _magn endings.
* bmi160
- Regulator and mount matrix support.
* mxc4005
- Add ID for mxc6655
* rockchip-saradc
- Triggered buffer support.
DT bindings
* qcom spmi-vadc converted to yaml + pmic7 bindings
* ak8975 tidy up and convert to yaml + add reset-gpio binding
* ingenic-adc -convert to yaml.
Core rework all carried through by Alexandru Ardelean.
* Assign parent device in the core rather than every driver. A few devices
need to provide specific non standard parents, so there is support for
overriding.
* Start to take parts of struct iio_dev opaque to the drivers.
This will be a long term job, but should reduce the number of drivers
we get that use parts that are currently only 'internal' by documentation.
* Move attach and detach of pollfunc to the core. Every triggered buffer
using driver had to do the same thing, so lets do it in the core. The
hard part here was getting all the drivers into canonical form so there
would be no functional changes in this final patch. That's taken quite
a lot of work over last couple of cycles!
Cleanups and minor fixes.
* docs
- Improve IIO_CONCENTRATION channel type description in ABI docs.
- Drop doubled word cases.
- Http to Https conversion.
* core
- Make iio_device_get_drvdata take a const struct iio_dev * avoiding some
nasty casts.
* ADCs
- Drop lots of users of of_match_ptr macro, includes of mod_devicetable.h
and CONFIG_OF protections. These prevent use of ACPI PRP0001 with these
drivers and get coppied into lots of new drivers.
* ad5380
- Constify iio_chan_spec_ext_info
* ad5592r
- Constify iio_chan_spec_ext_info
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* ad8366
- Make gpio optional as doesn't matter if its there or not.
* adis16480
- Use irq types instead of the flags.
* atlas-ezo-sensor
- Minimize scope of ret variable.
* at91-adc
- Add COMPILE_TEST dependency to driver to improve build coverage.
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* at91-sama5d2
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
- Drop Ludovic as a co-maintaienr.
* cros_ec
- Reapply the range after resume.
- Add a read only frequency entry for legacy version.
- Typo fixes
* hts221
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* inv_mpu
- Drop double check on ACPI companion device.
* iqs621
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* iqs624
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* max11100
- Constify iio_chan_spec
* mmc35240
- Constify reg_default
* rockchip-saradc
- Move to managed allocators for everything in probe.
- Use more distinctive prefix for channel macros.
* stk3310
- Constify regmap_config.
* stm32-adc
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* stm32-dfsdm-adc
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* ti-am335x
- Use managed allocations where straight forward in probe function.
* tsl2563
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
-----BEGIN PGP SIGNATURE-----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=LyRl
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.9a-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First set of new device support, cleanups and features for IIO in the 5.9 cycle
Some new devices, but particularly good this time is the core rework coming
from Alexandru. Some of this has been in Analog's tree a long time, but other
parts are motivated by closing down common mistakes in new drivers.
Changes since first try at this pull request:
* Add missed patch to actually remove iio_priv_to_dev and as a result
also drop a few ingenic patches that need to be updated to take this
into account.
* Fix an ordering issue int he pollfunc attach in the core rework.
New device support
* qcom pmic7 adc
- New driver using common qcom-vadc library. Some associated cleanups and
refactors.
* invensense icm42600
- New driver supporting icm42600, icm42602, icm42605 and icm42622 via i2c
or spi. These are all 6 axis IMUs with gyro and accelerometers.
Driver supports buffered modes using the hardware fifo and interpolation
for accurate timestamps.
* sensirion scd30
- New driver for this carbon dioxide sensor including i2c and serial
interfaces + bindings.
Features
* ak8975
- Add reset gpio support.
* bma400
- Support SPI.
* bmc150
- Document and add support for bmc156b and bmm150b, tidy up _magn endings.
* bmi160
- Regulator and mount matrix support.
* mxc4005
- Add ID for mxc6655
* rockchip-saradc
- Triggered buffer support.
DT bindings
* qcom spmi-vadc converted to yaml + pmic7 bindings
* ak8975 tidy up and convert to yaml + add reset-gpio binding
* ingenic-adc -convert to yaml.
Core rework all carried through by Alexandru Ardelean.
* Assign parent device in the core rather than every driver. A few devices
need to provide specific non standard parents, so there is support for
overriding.
* Start to take parts of struct iio_dev opaque to the drivers.
This will be a long term job, but should reduce the number of drivers
we get that use parts that are currently only 'internal' by documentation.
* Move attach and detach of pollfunc to the core. Every triggered buffer
using driver had to do the same thing, so lets do it in the core. The
hard part here was getting all the drivers into canonical form so there
would be no functional changes in this final patch. That's taken quite
a lot of work over last couple of cycles!
Cleanups and minor fixes.
* docs
- Improve IIO_CONCENTRATION channel type description in ABI docs.
- Drop doubled word cases.
- Http to Https conversion.
* core
- Make iio_device_get_drvdata take a const struct iio_dev * avoiding some
nasty casts.
* ADCs
- Drop lots of users of of_match_ptr macro, includes of mod_devicetable.h
and CONFIG_OF protections. These prevent use of ACPI PRP0001 with these
drivers and get coppied into lots of new drivers.
* ad5380
- Constify iio_chan_spec_ext_info
* ad5592r
- Constify iio_chan_spec_ext_info
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* ad8366
- Make gpio optional as doesn't matter if its there or not.
* adis16480
- Use irq types instead of the flags.
* atlas-ezo-sensor
- Minimize scope of ret variable.
* at91-adc
- Add COMPILE_TEST dependency to driver to improve build coverage.
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* at91-sama5d2
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
- Drop Ludovic as a co-maintaienr.
* cros_ec
- Reapply the range after resume.
- Add a read only frequency entry for legacy version.
- Typo fixes
* hts221
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* inv_mpu
- Drop double check on ACPI companion device.
* iqs621
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* iqs624
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* max11100
- Constify iio_chan_spec
* mmc35240
- Constify reg_default
* rockchip-saradc
- Move to managed allocators for everything in probe.
- Use more distinctive prefix for channel macros.
* stk3310
- Constify regmap_config.
* stm32-adc
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* stm32-dfsdm-adc
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* ti-am335x
- Use managed allocations where straight forward in probe function.
* tsl2563
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* tag 'iio-for-5.9a-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (107 commits)
iio: buffer: fix attach/detach pollfunc order
iio: core: remove iio_priv_to_dev() helper
Replace HTTP links with HTTPS ones: drivers/iio
Replace HTTP links with HTTPS ones: Documentation/devicetree/bindings/iio
dt-bindings: iio/adc: Convert ingenic-adc docs to YAML.
iio: cros_ec_accel_legacy: Add Read Only frequency entries
MAINTAINERS: adc: at91-sama5d2_adc: remove myself as co-maintainer
iio: adc: ti_am335x_adc: alloc kfifo & IRQ via devm_ functions
iio: adc: ti_am335x_adc: alloc channels via devm_kcalloc()
iio:adc:ingenic: drop of_match_ptr protection and include mod_devicetable.h
iio:adc:ti-tlc4541: Drop CONFIG_OF and of_match_ptr protections.
iio:adc:ti-adc161s626: Drop of_match_ptr protection.
iio:adc:ti-adc084s021: drop of_match_ptr protection
iio:adc:ti-adc0832: drop CONFIG_OF and of_match_ptr protections
iio:adc:ti-adc081c: Drop of_match_ptr and change to mod_devicetable.h
iio:adc:sd_adc_modulator: Drop of_match_ptr and tweak includes
iio:adc:mcp3422: remove CONFIG_OF and of_match_ptr protections
iio:adc:mcp320x: Drop CONFIG_OF and of_match_ptr protections
iio:adc:max1118: Drop CONFIG_OF / of_match_ptr protections
iio:adc:max11100: Drop of_match_ptr protection / add mod_devicetable.h include
...
Patch here adds a cpumask attr to hv_24x7 pmu along with ABI documentation.
Primary use to expose the cpumask is for the perf tool which has the
capability to parse the driver sysfs folder and understand the
cpumask file. Having cpumask file will reduce the number of perf command
line parameters (will avoid "-C" option in the perf tool
command line). It can also notify the user which is
the current cpu used to retrieve the counter data.
command:# cat /sys/devices/hv_24x7/interface/cpumask
0
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709051836.723765-3-kjain@linux.ibm.com
Add a new max_active zones definition in the sysfs documentation.
This definition will be common for all devices utilizing the zoned block
device support in the kernel.
Export max_active_zones according to this new definition for NVMe Zoned
Namespace devices, ZAC ATA devices (which are treated as SCSI devices by
the kernel), and ZBC SCSI devices.
Add the new max_active_zones member to struct request_queue, rather
than as a queue limit, since this property cannot be split across stacking
drivers.
For SCSI devices, even though max active zones is not part of the ZBC/ZAC
spec, export max_active_zones as 0, signifying "no limit".
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds