The PM reference count is not expected to be incremented on
return in lpi2c_imx_master_enable.
However, pm_runtime_get_sync will increment the PM reference
count even failed. Forgetting to putting operation will result
in a reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced.
Fixes: 13d6eb20fc ("i2c: imx-lpi2c: add runtime pm support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The PM reference count is not expected to be incremented on
return in functions img_i2c_xfer and img_i2c_init.
However, pm_runtime_get_sync will increment the PM reference
count even failed. Forgetting to putting operation will result
in a reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced.
Fixes: 93222bd9b9 ("i2c: img-scb: Add runtime PM")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The PM reference count is not expected to be incremented on
return in functions cdns_i2c_master_xfer and cdns_reg_slave.
However, pm_runtime_get_sync will increment pm usage counter
even failed. Forgetting to putting operation will result in a
reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced.
Fixes: 7fa32329ca ("i2c: cadence: Move to sensible power management")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add Chris Packham as FREESCALE MPC I2C maintainer.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
In mpc_i2c_get_fdr_8xxx div is assigned as we iterate through the
mpc_i2c_dividers_8xxx array. By the time we exit the loop div will
either have the value that matches the requested speed or be pointing at
the last entry in mpc_i2c_dividers_8xxx. Checking for div being NULL
after the loop is redundant so remove the check.
Reported-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
It's not necessary to release resource which allocated with devm_*
and those release may leads to a double free. And also remove useless
irq_dispose_mapping() call since mapping not created.
Fixes: 09aab7add7 ("i2c: mpc: use device managed APIs")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Use device managed functions an clean up error handling.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
All the in-tree dts files that use one of the compatible strings from
i2c-mpc.c provide an interrupt property. By making this mandatory we
can simplify the code.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Move the existing calls of mpc_i2c_fixup() to a recovery function
registered via bus_recovery_info. This makes it more obvious that
recovery is supported and allows for a future where recovery is
triggered by the i2c core.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Convert i2c-mpc to YAML.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
All of the in-tree device-trees that use the one of the compatible
strings from i2c-mpc.c supply an interrupts property. Make this property
mandatory to aid refactoring the driver.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
More and more drivers rely on devres to manage their resources, however
if bus' probe() and release() methods are not trivial and control some
of resources as well (for example enable or disable clocks, or attach
device to a power domain), we need to make sure that driver-allocated
resources are released immediately after driver's remove() method
returns, and not postponed until driver core gets around to releasing
resources. To fix that we open a new devres group before calling
driver's probe() and explicitly release it when we return from driver's
remove().
Tested-by: Jeff LaBundy <jeff@labundy.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Use generic i2c_freq_mode_string() helper to print chosen bus speed.
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add HiSilicon I2C controller driver for the Kunpeng SoC. It provides
the access to the i2c busses, which connects to the eeprom, rtc, etc.
The driver works with IRQ mode, and supports basic I2C features and 10bit
address. The DMA is not supported.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Some I2C drivers like Designware and HiSilicon will print the
bus frequency mode information, so add a public one that everyone
can make use of.
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Some I2C controller drivers will only unregister the I2C
adapter in their .remove() callback, which can be done
by simply using a managed variant to add the I2C adapter.
So add the managed functions for adding the I2C adapter.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
From now on only accepting complete software nodes.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Creating a software node and supplying that for the device
instead of only the device properties in it. A software
node was always created in any case to hold the additional
device properties, so this change does not have any real
effect.
This change makes it possible to remove support for the
problematic "dangling" device properties from i2c subsystem,
i.e. the "properties" member from struct i2c_board_info. The
problems caused by them are not related to this driver.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The older device property API is going to be removed soon
and that will affect also I2C subystem. Supplying complete
software nodes instead of only the properties in them for
the I2C devices.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Complete software node can now be supplied to the device
with struct i2c_board_info.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Max Staudt <max@enpas.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Additional device properties are always just a part of a
software fwnode. If the device properties are constant, the
software node can also be constant.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Additional device properties are always just a part of a
software fwnode. If the device properties are constant, the
software node can also be constant.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Additional device properties are always just a part of a
software fwnode. If the device properties are constant, the
software node can also be constant.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Additional device properties are always just a part of a
software fwnode. If the device properties are constant, the
software node can also be constant.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Additional device properties are always just a part of a
software fwnode. If the device properties are constant, the
software node can also be constant.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Additional device properties are always just a part of a
software fwnode. If the device properties are constant, the
software node can also be constant.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Additional device properties are always just a part of a
software fwnode. If the device properties are constant, the
software node can also be constant.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
This makes it possible for the drivers to assign complete
software fwnodes to the devices instead of only the device
properties in those nodes.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> # for brcmstb
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Use devm_add_action_or_reset() instead of devres_alloc() and
devres_add(), which works the same. This will simplify the
code. There is no functional change.
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
In case of error, the function i2c_new_client_device() returns
ERR_PTR() and never returns NULL. The NULL test in the return
value check should be replaced with IS_ERR().
Fixes: 17631e8ca2 ("i2c: designware: Add driver support for AMD NAVI GPU")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
They return 0 always, so save some lines and code.
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Since commit bc1c2048ab ("i2c: bpmp-tegra: Ignore unknown I2C_M
flags") we don't need to mask out flags and can keep the input variable
as is to save quite some lines.
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Since we have generic definitions for bus frequencies, let's use them.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Khalil Blaiech <kblaiech@nvidia.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The Latest AMD NAVI GPU card has an integrated Type-C controller and
Designware I2C with PCI Interface. The PD controller for USB Type-C can
be accessed over I2C. The client driver is part of the USB Type-C UCSI
driver.
Also, there exists a couple of notable IP limitations that are dealt as
workarounds:
- I2C transaction work on a polling mode as IP does not generate
interrupt.
- I2C read command sent twice to address the IP issues.
- AMD NAVI GPU based products are already in the commercial market,
hence some of the I2C parameters are statically programmed as they
can not be part of the ACPI table.
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Co-developed-by: Nehal Bakulchandra Shah <Nehal-Bakulchandra.shah@amd.com>
Signed-off-by: Nehal Bakulchandra Shah <Nehal-Bakulchandra.shah@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Create an i2c_adapter for CP2615's I2C master interface
Signed-off-by: Bence Csókás <bence98@sch.bme.hu>
[wsa: switched to '__packed', added some 'static' and an include]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
This quirk signifies that the adapter cannot do a repeated
START, it always issues a STOP condition after transfers.
Suggested-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Bence Csókás <bence98@sch.bme.hu>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
For each device, the nosy driver allocates a pcilynx structure.
A use-after-free might happen in the following scenario:
1. Open nosy device for the first time and call ioctl with command
NOSY_IOC_START, then a new client A will be malloced and added to
doubly linked list.
2. Open nosy device for the second time and call ioctl with command
NOSY_IOC_START, then a new client B will be malloced and added to
doubly linked list.
3. Call ioctl with command NOSY_IOC_START for client A, then client A
will be readded to the doubly linked list. Now the doubly linked
list is messed up.
4. Close the first nosy device and nosy_release will be called. In
nosy_release, client A will be unlinked and freed.
5. Close the second nosy device, and client A will be referenced,
resulting in UAF.
The root cause of this bug is that the element in the doubly linked list
is reentered into the list.
Fix this bug by adding a check before inserting a client. If a client
is already in the linked list, don't insert it.
The following KASAN report reveals it:
BUG: KASAN: use-after-free in nosy_release+0x1ea/0x210
Write of size 8 at addr ffff888102ad7360 by task poc
CPU: 3 PID: 337 Comm: poc Not tainted 5.12.0-rc5+ #6
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
Call Trace:
nosy_release+0x1ea/0x210
__fput+0x1e2/0x840
task_work_run+0xe8/0x180
exit_to_user_mode_prepare+0x114/0x120
syscall_exit_to_user_mode+0x1d/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
Allocated by task 337:
nosy_open+0x154/0x4d0
misc_open+0x2ec/0x410
chrdev_open+0x20d/0x5a0
do_dentry_open+0x40f/0xe80
path_openat+0x1cf9/0x37b0
do_filp_open+0x16d/0x390
do_sys_openat2+0x11d/0x360
__x64_sys_open+0xfd/0x1a0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
Freed by task 337:
kfree+0x8f/0x210
nosy_release+0x158/0x210
__fput+0x1e2/0x840
task_work_run+0xe8/0x180
exit_to_user_mode_prepare+0x114/0x120
syscall_exit_to_user_mode+0x1d/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
The buggy address belongs to the object at ffff888102ad7300 which belongs to the cache kmalloc-128 of size 128
The buggy address is located 96 bytes inside of 128-byte region [ffff888102ad7300, ffff888102ad7380)
[ Modified to use 'list_empty()' inside proper lock - Linus ]
Link: https://lore.kernel.org/lkml/1617433116-5930-1-git-send-email-zheyuma97@gmail.com/
Reported-and-tested-by: 马哲宇 (Zheyu Ma) <zheyuma97@gmail.com>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=edGl
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.12-2021-04-03' of git://git.kernel.dk/linux-block
POull io_uring fix from Jens Axboe:
"Just fixing a silly braino in a previous patch, where we'd end up
failing to compile if CONFIG_BLOCK isn't enabled.
Not that a lot of people do that, but kernel bot spotted it and it's
probably prudent to just flush this out now before -rc6.
Sorry about that, none of my test compile configs have !CONFIG_BLOCK"
* tag 'io_uring-5.12-2021-04-03' of git://git.kernel.dk/linux-block:
io_uring: fix !CONFIG_BLOCK compilation failure
The header file <linux/errno.h> is already included above and can be
removed here.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
I have a handful of fixes for 5.12:
* A fix for a stack tracing regression related to "const register asm"
variables, which have unexpected behavior.
* A fix to put_user() that ensures the value to be written is evaluated
before enabling access to userspace memory..
* A fix to align the exception vector table correctly, so we don't rely
on the firmware's handling of unaligned accesses.
* A build fix to make NUMA depend on MMU, which triggers some
randconfigs.
-----BEGIN PGP SIGNATURE-----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=DUBG
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"A handful of fixes for 5.12:
- fix a stack tracing regression related to "const register asm"
variables, which have unexpected behavior.
- ensure the value to be written by put_user() is evaluated before
enabling access to userspace memory..
- align the exception vector table correctly, so we don't rely on the
firmware's handling of unaligned accesses.
- build fix to make NUMA depend on MMU, which triggered on some
randconfigs"
* tag 'riscv-for-linus-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Make NUMA depend on MMU
riscv: remove unneeded semicolon
riscv,entry: fix misaligned base for excp_vect_table
riscv: evaluate put_user() arg before enabling user access
riscv: Drop const annotation for sp
Fix a bug on pseries where spurious wakeups from H_PROD would prevent partition migration
from succeeding.
Fix oopses seen in pcpu_alloc(), caused by parallel faults of the percpu mapping causing
us to corrupt the protection key used for the mapping, and cause a fatal key fault.
Thanks to Aneesh Kumar K.V, Murilo Opsfelder Araujo, Nathan Lynch.
-----BEGIN PGP SIGNATURE-----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=booR
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.12-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Fix a bug on pseries where spurious wakeups from H_PROD would prevent
partition migration from succeeding.
Fix oopses seen in pcpu_alloc(), caused by parallel faults of the
percpu mapping causing us to corrupt the protection key used for the
mapping, and cause a fatal key fault.
Thanks to Aneesh Kumar K.V, Murilo Opsfelder Araujo, and Nathan Lynch"
* tag 'powerpc-5.12-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm/book3s64: Use the correct storage key value when calling H_PROTECT
powerpc/pseries/mobility: handle premature return from H_JOIN
powerpc/pseries/mobility: use struct for shared state
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmBnkEUTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXv4YCADaSmGXyyLdoZQ5dH0oiWdt76aLNnuK
ckBDoiLWYkwOHQndqeQhsIxKBO+wEASSpua0fv1idewAk8zhw553IjCh2KZbtvzA
Mev5WwotBZnY2Hl1jdByqkZ/PS/Kms58qlvW4rcgg831DNLYGvc3soRiQy81GdIv
MVFJFFrZB4QsWcsjEGoN7ZUprG66dRixIBl5r/f426zRcpA/OlIEEKp0zRwYgyJL
rSfpxDAquEUsLgWC01y8g3ZBlpto63ZS28UPPC9McgEW+SK4+OOmMZu7t/ob2wyt
RopbX/meoPitMeruZy3z/jbUezW7Celz3dG2diL3WCX20HHjOmTjm6CM
=rax+
-----END PGP SIGNATURE-----
Merge tag 'hyperv-fixes-signed-20210402' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V fixes from Wei Liu:
"One fix from Lu Yunlong for a double free in hvfb_probe"
* tag 'hyperv-fixes-signed-20210402' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
video: hyperv_fb: Fix a double free in hvfb_probe
Here is a single driver core fix for a reported problem with differed
probing. It has been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYGhGpg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymgSACeJYD1EfjFSCB0gEmdjU261rWOcT0AoLTRkJW1
vywQNi5XNrbbmsWpxLsF
=wG2r
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fix from Greg KH:
"Here is a single driver core fix for a reported problem with differed
probing. It has been in linux-next for a while with no reported
problems"
* tag 'driver-core-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: clear deferred probe reason on probe retry
Qinglang Miao