Add driver for memory controller present on Nuvoton NPCM SoCs. The
memory controller supports single bit error correction and double bit
error detection.
Signed-off-by: Marvin Lin <milkfafa@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230111093245.318745-4-milkfafa@gmail.com
Add EDAC support for Xilinx ZynqMP OCM Controller, so this driver reports CE and
UE errors upon interrupt generation. Also add debugfs files for error injection.
On Xilinx ZynqMP platform, both OCM Controller driver(zynqmp_edac) and DDR
Memory Controller driver(synopsys_edac) co-exist which means both can be loaded
at a time. This scenario is tested on Xilinx ZynqMP platform.
Fix following issue reported by the robot:
"MAINTAINERS references a file that doesn't exist:
Documentation/devicetree/bindings/edac/xlnx,zynqmp-ocmc.yaml"
[ bp:
- Massage commit message
- s/EDAC_ZYNQMP_OCM/EDAC_ZYNQMP/
- Touchups
]
Reported-by: kernel test robot <lkp@intel.com>
Co-developed-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230104084512.1855243-3-sai.krishna.potthuri@amd.com
Combine all queued EDAC changes for submission into v6.2:
* ras/edac-ghes:
EDAC/igen6: Return the correct error type when not the MC owner
apei/ghes: Use xchg_release() for updating new cache slot instead of cmpxchg()
EDAC: Check for GHES preference in the chipset-specific EDAC drivers
EDAC/ghes: Make ghes_edac a proper module
EDAC/ghes: Prepare to make ghes_edac a proper module
EDAC/ghes: Add a notifier for reporting memory errors
efi/cper: Export several helpers for ghes_edac to use
* ras/edac-misc:
EDAC/i10nm: fix refcount leak in pci_get_dev_wrapper()
EDAC/i5400: Fix typo in comment: vaious -> various
EDAC/mc_sysfs: Increase legacy channel support to 12
MAINTAINERS: Make Mauro EDAC reviewer
MAINTAINERS: Make Manivannan Sadhasivam the maintainer of qcom_edac
EDAC/i5000: Mark as BROKEN
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Commit
dc4e8c07e9 ("ACPI: APEI: explicit init of HEST and GHES in apci_init()")
introduced a bug leading to ghes_edac_register() to be invoked before
edac_init(). Because at that time the bus "edac" hadn't been even
registered, this created sysfs nodes as /devices/mc0 instead of
/sys/devices/system/edac/mc/mc0 on an Ampere eMag server.
Fix this by turning ghes_edac into a proper module.
The list of GHES devices returned is not protected from being modified
concurrently but it is pretty static as it gets created only during GHES
init and latter is not a module so...
[ bp: Massage. ]
Fixes: dc4e8c07e9 ("ACPI: APEI: explicit init of HEST and GHES in apci_init()")
Co-developed-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Jia He <justin.he@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221010023559.69655-5-justin.he@arm.com
i5000_edac supports very old hardware which isn't available and it's
been broken for single/dual channel for many years without anyone
noticing. Marking as BROKEN.
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220921181009.oxytvicy6sry6it7@redhat.com
Since composable cache may be L3 cache if there is a L2 cache, we should
use its original name composable cache to prevent confusion.
There are some new lines were generated due to adding the compatible
"sifive,ccache0" into ID table and indent requirement.
The sifive L2 has been renamed to sifive CCACHE, EDAC driver needs to
apply the change as well.
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Zong Li <zong.li@sifive.com>
Co-developed-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220913061817.22564-3-zong.li@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Since we have a common P2SB accessor in tree we may use it instead of
open coded variants.
Replace custom code by p2sb_bar() call.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Henning Schild <henning.schild@siemens.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
i.MX8MP use Synopsys v3.70a DDR controller IP so add support for it with
the Synopsys driver.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20220428023209.18087-1-sherry.sun@nxp.com
Switch the GHES EDAC memory error reporting functions to use the common
CPER ones and get rid of code duplication.
[ bp:
- rewrite commit message, remove useless text
- rip out useless reformatting
- align function params on the opening brace
- rename function to a more descriptive name
- drop useless function exports
- handle buffer lengths properly when printing other detail
- remove useless casting
]
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220308144053.49090-3-xueshuai@linux.alibaba.com
Intel's N5X platform is also using the Synopsys EDAC controller.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lkml.kernel.org/r/20211012190709.1504152-3-dinguyen@kernel.org
igen6_edac needs mce_register()/unregister() functions,
so it should depend on X86_MCE (or X86_MCE_INTEL).
That change prevents these build errors:
ld: drivers/edac/igen6_edac.o: in function `igen6_remove':
igen6_edac.c:(.text+0x494): undefined reference to `mce_unregister_decode_chain'
ld: drivers/edac/igen6_edac.o: in function `igen6_probe':
igen6_edac.c:(.text+0xf5b): undefined reference to `mce_register_decode_chain'
Fixes: 10590a9d4f ("EDAC/igen6: Add EDAC driver for Intel client SoCs using IBECC")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20210619160203.2026-1-rdunlap@infradead.org
Simplify 32-bit and 64-bit Intel SoCFPGA Kconfig options by having only
one for both of them. This the common practice for other platforms.
Additionally, the ARCH_SOCFPGA is too generic as SoCFPGA designs come
from multiple vendors.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Families up to and including 0x16 allow access to the injection
hardware. Starting with family 0x17, access to those registers is
blocked by security policy.
Limit that only on the families which support it.
Suggested-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201222180013.GD13463@zn.tnic
Merge them into the main driver and put them inside an EDAC_DEBUG
ifdeffery to simplify the driver and have all debugging/injection stuff
behind a debug build-time switch.
No functional changes.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://lkml.kernel.org/r/20201215110517.5215-2-bp@alien8.de
The mv64x60 EDAC driver depends on CONFIG_MV64X60. But that symbol is
not user-selectable, and the last code that selected it was removed
with the C2K board support in 2018, see:
92c8c16f34 ("powerpc/embedded6xx: Remove C2K board support")
That means the driver is now dead code, so remove it.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201207040253.628528-1-mpe@ellerman.id.au
This driver supports Intel client SoC with integrated memory controller
using In-Band ECC(IBECC). The memory correctable and uncorrectable errors
are reported via NMIs. The driver handles the NMIs and decodes the memory
error address to platform specific address. The first IBECC-supported SoC
is Elkhart Lake.
[Tony: s/#include <linux/nmi.h>/#include <asm/nmi.h>/ to fix randconfig build]
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
The Amazon's Annapurna Labs Memory Controller EDAC supports ECC capability
for error detection and correction (Single bit error correction, Double
detection). This driver introduces EDAC driver for that capability.
[ bp: Remove "EDAC" string from Kconfig tristate as it is redundant. ]
Signed-off-by: Talel Shenhar <talel@amazon.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: James Morse <james.morse@arm.com>
Link: https://lkml.kernel.org/r/20200816185551.19108-3-talel@amazon.com
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The driver supports error detection and correction on devices with an
ARM DMC-520 memory controller.
Signed-off-by: Lei Wang <leiwang_git@outlook.com>
Signed-off-by: Shiping Ji <shiping.linux@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: James Morse <james.morse@arm.com>
Link: https://lkml.kernel.org/r/83b48c70-dc06-d0d4-cae9-a2187fca628b@gmail.com
-----BEGIN PGP SIGNATURE-----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=fR3M
-----END PGP SIGNATURE-----
Merge tag 'edac_for_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
"A totally boring branch this time around: a garden variety of small
fixes all over the place"
* tag 'edac_for_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/amd64: Do not warn when removing instances
EDAC/sifive: Fix return value check in ecc_register()
EDAC/aspeed: Remove unneeded semicolon
EDAC: remove set but not used variable 'ecc_loc'
EDAC: skx_common: downgrade message importance on missing PCI device
EDAC/Kconfig: Fix Kconfig indentation
The sifive_l2_cache.c is in no way related to RISC-V architecture
memory management. It is a little stub driver working around the fact
that the EDAC maintainers prefer their drivers to be structured in a
certain way that doesn't fit the SiFive SOCs.
Move the file to drivers/soc and add a Kconfig option for it, as well
as the whole drivers/soc boilerplate for CONFIG_SOC_SIFIVE.
Fixes: a967a289f1 ("RISC-V: sifive_l2_cache: Add L2 cache controller driver for SiFive SoCs")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
[paul.walmsley@sifive.com: keep the MAINTAINERS change specific to the L2$ controller code]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with a command like:
$ sed -e 's/^ /\t/' -i */Kconfig
[ bp: make it a single line. ]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: James Morse <james.morse@arm.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Robert Richter <rrichter@marvell.com>
Cc: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20191120134206.15588-1-krzk@kernel.org
- fix various clang build and cppcheck issues
- switch ARM to use new common outgoing-CPU-notification code
- add some additional explanation about the boot code
- kbuild "make clean" fixes
- get rid of another "(____ptrval____)", this time for the VDSO code
- avoid treating cache maintenance faults as a write
- add a frame pointer unwinder implementation for clang
- add EDAC support for Aurora L2 cache
- improve robustness of adjust_lowmem_bounds() finding the bounds of
lowmem.
- add reset control for AMBA primecell devices
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Evmc
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
- fix various clang build and cppcheck issues
- switch ARM to use new common outgoing-CPU-notification code
- add some additional explanation about the boot code
- kbuild "make clean" fixes
- get rid of another "(____ptrval____)", this time for the VDSO code
- avoid treating cache maintenance faults as a write
- add a frame pointer unwinder implementation for clang
- add EDAC support for Aurora L2 cache
- improve robustness of adjust_lowmem_bounds() finding the bounds of
lowmem.
- add reset control for AMBA primecell devices
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (24 commits)
ARM: 8906/1: drivers/amba: add reset control to amba bus probe
ARM: 8905/1: Emit __gnu_mcount_nc when using Clang 10.0.0 or newer
ARM: 8904/1: skip nomap memblocks while finding the lowmem/highmem boundary
ARM: 8903/1: ensure that usable memory in bank 0 starts from a PMD-aligned address
ARM: 8891/1: EDAC: armada_xp: Add support for more SoCs
ARM: 8888/1: EDAC: Add driver for the Marvell Armada XP SDRAM and L2 cache ECC
ARM: 8892/1: EDAC: Add missing debugfs_create_x32 wrapper
ARM: 8890/1: l2x0: add marvell,ecc-enable property for aurora
ARM: 8889/1: dt-bindings: document marvell,ecc-enable binding
ARM: 8886/1: l2x0: support parity-enable/disable on aurora
ARM: 8885/1: aurora-l2: add defines for parity and ECC registers
ARM: 8887/1: aurora-l2: add prefix to MAX_RANGE_SIZE
ARM: 8902/1: l2c: move cache-aurora-l2.h to asm/hardware
ARM: 8900/1: UNWINDER_FRAME_POINTER implementation for Clang
ARM: 8898/1: mm: Don't treat faults reported from cache maintenance as writes
ARM: 8896/1: VDSO: Don't leak kernel addresses
ARM: 8895/1: visit mach-* and plat-* directories when cleaning
ARM: 8894/1: boot: Replace open-coded nop with macro
ARM: 8893/1: boot: Explain the 8 nops
ARM: 8876/1: fix O= building with CONFIG_FPE_FASTFPE
...
Add support for the ECC functionality as found in the DDR RAM and L2
cache controllers on the MV78230/MV78x60 SoCs. This driver has been
tested on the MV78460 (on a custom board with a DDR3 ECC DIMM).
[cp use SPDX license]
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Add ECC support for Mellanox BlueField SoC DDR controller.
This requires SMC to the running Arm Trusted Firmware to report
what is the current memory configuration.
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Shravan Kumar Ramani <sramani@mellanox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add an EDAC driver for SiFive SoCs. The initial version supports ECC
event monitoring and reporting through the EDAC framework for the SiFive
L2 cache controller. It registers for notifier events from the L2 cache
controller driver (arch/riscv/mm/sifive_l2_cache.c) for L2 ECC events.
[ bp: Massage commit message. ]
Signed-off-by: Yash Shah <yash.shah@sifive.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: James Morse <james.morse@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: linux-riscv@lists.infradead.org
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: sachin.ghadi@sifive.com
Link: https://lkml.kernel.org/r/1557142026-15949-2-git-send-email-yash.shah@sifive.com
The mpc85xx EDAC driver can be configured as a module but then fails to
build because it uses two unexported symbols:
ERROR: ".pci_find_hose_for_OF_device" [drivers/edac/mpc85xx_edac_mod.ko] undefined!
ERROR: ".early_find_capability" [drivers/edac/mpc85xx_edac_mod.ko] undefined!
We don't want to export those symbols just for this driver, so make the
driver only configurable as a built-in.
This seems to have been broken since at least
c92132f598 ("edac/85xx: Add PCIe error interrupt edac support")
(Nov 2013).
[ bp: make it depend on EDAC=y so that the EDAC core doesn't get built
as a module. ]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Johannes Thumshirn <jth@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: linuxppc-dev@ozlabs.org
Cc: morbidrsa@gmail.com
Link: https://lkml.kernel.org/r/20190502141941.12927-1-mpe@ellerman.id.au
The CONFIG_ALTERA_EDAC Kconfig symbol always enables the SDRAM EDAC
functionality. On the newer architectures, however, there are cases
where the peripheral EDAC functionality is enabled but SDRAM needs to be
disabled.
Move SDRAM functions so they can be contained inside the conditional
CONFIG. Create new CONFIG option just for SDRAM.
[ bp: Massage commit message. ]
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: James Morse <james.morse@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: dinguyen@kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: linux@armlinux.org.uk
Link: https://lkml.kernel.org/r/1551121006-4657-2-git-send-email-thor.thayer@linux.intel.com
This driver supports the Intel 10nm series server integrated memory
controller. It gets the memory capacity and topology information by
reading the registers in PCI configuration space and memory-mapped I/O.
It decodes the memory error address to the platform specific address
by using the ACPI Address Translation (ADXL) Device Specific Method
(DSM).
Co-developed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: James Morse <james.morse@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: https://lkml.kernel.org/r/20190130191519.15393-5-tony.luck@intel.com
It was previously noted that Kconfig complained about unmet dependencies
when trying to configure skx_edac together with CONFIG_ACPI=n. First fix
for this checked for ACPI when doing
select ACPI_ADXL
but this required stub functions for the case where ACPI wasn't
selected. It also allowed building a driver that didn't actually work
for a system that has non-volatile DIMMs.
Arnd Bergmann pointed out that the right fix is to make EDAC_SKX
"depend on ACPI".
Fixes: a324e9396c ("EDAC, skx: Fix randconfig builds")
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
CC: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Mauro Carvalho Chehab <mchehab@kernel.org>
CC: linux-edac <linux-edac@vger.kernel.org>
CC: qiuxu.zhuo@intel.com
Link: http://lkml.kernel.org/r/20181106183914.GA26731@agluck-desk
* ACPI_ADXL build fix
-----BEGIN PGP SIGNATURE-----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=JQUK
-----END PGP SIGNATURE-----
Merge tag 'edac_for_4.20_2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull more EDAC updates from Borislav Petkov:
"The second part of the EDAC pile which contains the ADXL user and a
build fix which addresses a not-so-sensical .config but fixes
randconfig builds people do:
- skx_edac: Address translation for NVDIMMs (Tony Luck and Qiuxu Zhuo)
- ACPI_ADXL build fix"
[ I don't think "sensical" is a word, particularly when used in the
context of actually meaning "nonsensical", but I like it - Linus ]
* tag 'edac_for_4.20_2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
EDAC, skx: Fix randconfig builds
EDAC, skx_edac: Add address translation for non-volatile DIMMs
The driver depends on the ADXL component glue and selects it. However,
ADXL itself implicitly depends on ACPI and in nonsensical randconfig
builds like this:
# CONFIG_ACPI is not set
CONFIG_ACPI_ADXL=y
where ACPI is not enabled, the build fails with:
drivers/edac/skx_edac.o: In function `skx_mce_check_error':
skx_edac.c:(.text+0xab): undefined reference to `adxl_decode'
drivers/edac/skx_edac.o: In function `skx_init':
skx_edac.c:(.init.text+0x8bf): undefined reference to `adxl_get_component_names'
make: *** [vmlinux] Error 1
Add stubs for that case so that the build succeeds. CONFIG_ACPI=n
doesn't make any sense for real configurations but this fix will at
least silence randconfig builds.
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Currently, this driver doesn't support address translation for
non-volatile DIMMs.
The ACPI ADXL DSM method provides address translation for both volatile
and non-volatile DIMMs. Enable it to use the ACPI DSM methods if they
are supported and there are non-volatile DIMMs populated on the system.
Co-developed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
CC: Mauro Carvalho Chehab <mchehab@kernel.org>
CC: arozansk@redhat.com
CC: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1540106336-5212-1-git-send-email-qiuxu.zhuo@intel.com
Add error reporting driver for Single Bit Errors (SBEs) and Double Bit
Errors (DBEs). As of now, this driver supports error reporting for
Last Level Cache Controller (LLCC) of Tag RAM and Data RAM. Interrupts
are triggered when the errors happen in the cache, the driver handles
those interrupts and dumps the syndrome registers.
Signed-off-by: Channagoud Kadabi <ckadabi@codeaurora.org>
Signed-off-by: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
Co-developed-by: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Prevent build error when CONFIG_ACPI_NFIT=m and CONFIG_EDAC_SKX=y by
limiting EDAC_SKX based on how ACPI_NFIT is set.
Fixes this build error:
drivers/edac/skx_edac.o: In function `get_nvdimm_info':
../drivers/edac/skx_edac.c:399: undefined reference to `nfit_get_smbios_id'
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Fixes: 58ca9ac146 ("EDAC, skx_edac: Detect non-volatile DIMMs")
Link: http://lkml.kernel.org/r/3af91354-8e19-d2af-1bba-ced8dce053f1@infradead.org
Signed-off-by: Borislav Petkov <bp@suse.de>
* misc fixes
-----BEGIN PGP SIGNATURE-----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=K89j
-----END PGP SIGNATURE-----
Merge tag 'edac_for_4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull EDAC updates from Borislav Petkov:
"Noteworthy is the NVDIMM support:
- NVDIMM support to EDAC (Tony Luck)
- misc fixes"
* tag 'edac_for_4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
EDAC, sb_edac: Remove variable length array usage
EDAC, skx_edac: Detect non-volatile DIMMs
firmware, DMI: Add function to look up a handle and return DIMM size
acpi, nfit: Add function to look up nvdimm device and provide SMBIOS handle
EDAC: Add new memory type for non-volatile DIMMs
EDAC: Drop duplicated array of strings for memory type names
EDAC, layerscape: Allow building for LS1021A
The Tile architecture is obsolete and getting removed from the kernel,
this driver appears to only be used there, and not on the ARM based
successors (Tile-Mx, BlueField), so we should remove it as well.
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This just covers the topology function of the EDAC driver. We locate
which DIMM slots are populated with NVDIMMs and query the NFIT and
SMBIOS tables to get the size.
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Cc: Aristeu Rozanski <aris@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: linux-acpi@vger.kernel.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: linux-nvdimm@lists.01.org
Link: http://lkml.kernel.org/r/20180312182430.10335-6-tony.luck@intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
The LS1021A has a memory controller supported by this driver. It builds
just fine, and I've done some rudimentary testing using the error
injection facility, which suggests that it is indeed working.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Acked-by: York Sun <york.sun@nxp.com>
Cc: Alexander Stein <alexander.stein@systec-electronic.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20180220150912.2954-1-rasmus.villemoes@prevas.dk
Signed-off-by: Borislav Petkov <bp@suse.de>
TI Keystone and DRA7xx SoCs have support for EDAC on DDR3 memory that can
correct one bit errors and detect two bit errors. Add EDAC driver for this
feature which plugs into the generic kernel EDAC framework.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: linux-omap@vger.kernel.org
Link: http://lkml.kernel.org/r/1510578490-14510-1-git-send-email-t-kristo@ti.com
[ Add SPDX tag and make _emif_get_id() use edac_printk(). ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Leave it to the user to decide whether to enable this or not. Otherwise,
platform-specific drivers won't initialize (currently, EDAC supports
only a single platform driver loaded).
Signed-off-by: Borislav Petkov <bp@suse.de>
Move all the EDAC core functionality behind CONFIG_EDAC and get rid of
that indirection. Update defconfigs which had it.
While at it, fix dependencies such that EDAC depends on RAS for the
tracepoints.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: linux-edac@vger.kernel.org
Marvin Lin