Commit Graph

56 Commits

Author SHA1 Message Date
Alexander A. Klimov 7ecd4a8175 PCI: Replace http:// links with https://
Replace http:// links with https:// links.  This reduces the likelihood of
man-in-the-middle attacks when developers open these links.

  Deterministic algorithm:
  For each file:
    If not .svg:
      For each line:
	If doesn't contain `\bxmlns\b`:
	  For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
	    If both the HTTP and HTTPS versions
	    return 200 OK and serve the same content:
	      Replace HTTP with HTTPS.

[bhelgaas: also update samsung.com links, drop sourceforge link]
Link: https://lore.kernel.org/r/20200627103050.71712-1-grandmaster@al2klimov.de
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-06-30 13:05:09 -05:00
Xiaochun Lee 1574051e52 x86/PCI: Mark Intel C620 MROMs as having non-compliant BARs
The Intel C620 Platform Controller Hub has MROM functions that have non-PCI
registers (undocumented in the public spec) where BAR 0 is supposed to be,
which results in messages like this:

  pci 0000:00:11.0: [Firmware Bug]: reg 0x30: invalid BAR (can't size)

Mark these MROM functions as having non-compliant BARs so we don't try to
probe any of them.  There are no other BARs on these devices.

See the Intel C620 Series Chipset Platform Controller Hub Datasheet,
May 2019, Document Number 336067-007US, sec 2.1, 35.5, 35.6.

[bhelgaas: commit log, add 0xa26d]
Link: https://lore.kernel.org/r/1589513467-17070-1-git-send-email-lixiaochun.2888@163.com
Signed-off-by: Xiaochun Lee <lixc17@lenovo.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
2020-05-15 14:19:50 -05:00
Kai-Heng Feng 7e8ce0e2b0 x86/PCI: Avoid AMD FCH XHCI USB PME# from D0 defect
The AMD FCH USB XHCI Controller advertises support for generating PME#
while in D0.  When in D0, it does signal PME# for USB 3.0 connect events,
but not for USB 2.0 or USB 1.1 connect events, which means the controller
doesn't wake correctly for those events.

  00:10.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller [1022:7914] (rev 20) (prog-if 30 [XHCI])
        Subsystem: Dell FCH USB XHCI Controller [1028:087e]
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Clear PCI_PM_CAP_PME_D0 in dev->pme_support to indicate the device will not
assert PME# from D0 so we don't rely on it.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203673
Link: https://lore.kernel.org/r/20190902145252.32111-1-kai.heng.feng@canonical.com
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
2019-11-21 07:49:31 -06:00
Alexander Shishkin 2e095ce7b6 x86/PCI: Fixup RTIT_BAR of Intel Denverton Trace Hub
On Denverton's integration of the Intel(R) Trace Hub (for a reference and
overview see Documentation/trace/intel_th.rst) the reported size of one of
its resources (RTIT_BAR) doesn't match its actual size, which leads to
overlaps with other devices' resources.

In practice, it overlaps with XHCI MMIO space, which results in the xhci
driver bailing out after seeing its registers as 0xffffffff, and perceived
disappearance of all USB devices:

  intel_th_pci 0000:00:1f.7: enabling device (0004 -> 0006)
  xhci_hcd 0000:00:15.0: xHCI host controller not responding, assume dead
  xhci_hcd 0000:00:15.0: xHC not responding in xhci_irq, assume controller is dead
  xhci_hcd 0000:00:15.0: HC died; cleaning up
  usb 1-1: USB disconnect, device number 2

For this reason, we need to resize the RTIT_BAR on Denverton to its actual
size, which in this case is 4MB.  The corresponding erratum is DNV36 at the
link below:

  DNV36.       Processor Host Root Complex May Incorrectly Route Memory
               Accesses to Intel® Trace Hub

  Problem:     The Intel® Trace Hub RTIT_BAR (B0:D31:F7 offset 20h) is
	       reported as a 2KB memory range.  Due to this erratum, the
	       processor Host Root Complex will forward addresses from
	       RTIT_BAR to RTIT_BAR + 4MB -1 to Intel® Trace Hub.

  Implication: Devices assigned within the RTIT_BAR to RTIT_BAR + 4MB -1
               space may not function correctly.

  Workaround:  A BIOS code change has been identified and may be
               implemented as a workaround for this erratum.

  Status:      No Fix.

Note that 5118ccd347 ("intel_th: pci: Add Denverton SOC support") updates
the Trace Hub driver so it claims the Denverton device, but the resource
overlap exists regardless of whether that driver is loaded or that commit
is included.

Link: https://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/atom-c3000-family-spec-update.pdf
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
[bhelgaas: include erratum text, clarify relationship with 5118ccd347]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
2019-02-07 08:43:58 -06:00
Jon Derrick 4f475e8e0a x86/PCI: Apply VMD's AERSID fixup generically
A root port Device ID changed between simulation and production.  Rather
than match Device IDs which may not be future-proof if left unmaintained,
match all root ports which exist in a VMD domain.

Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-10-02 16:22:11 -05:00
Jon Derrick a5ad57e6b8 x86/PCI: Add additional VMD device root ports to VMD AER quirk
VMD devices change the source id of messages from child devices to the
VMD endpoint. This patch adds additional VMD root port device ids to the
AER quirk which requires walking the bus to determine which devices were
throwing the error.

Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2018-05-24 17:43:19 +01:00
=?UTF-8?q?Christian=20K=C3=B6nig?= 838cda3697 x86/PCI: Enable AMD 64-bit window on resume
Reenable the 64-bit window during resume.

Fixes: fa564ad963 ("x86/PCI: Enable a 64bit BAR on AMD Family 15h (Models 00-1f, 30-3f, 60-7f)")
Reported-by: Tom St Denis <tom.stdenis@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-01-16 11:45:50 -06:00
=?UTF-8?q?Christian=20K=C3=B6nig?= 03a551734c x86/PCI: Move and shrink AMD 64-bit window to avoid conflict
Avoid problems with BIOS implementations which don't report all used
resources to the OS by only allocating a 256GB window directly below the
hardware limit (from the BKDG, sec 2.4.6).

Fixes a silent reboot loop reported by Aaro Koskinen <aaro.koskinen@iki.fi>
on an AMD-based MSI MS-7699/760GA-P43(FX) system.  This was apparently
caused by RAM or other unreported hardware that conflicted with the new
window.

Link: https://support.amd.com/TechDocs/49125_15h_Models_30h-3Fh_BKDG.pdf
Link: https://lkml.kernel.org/r/20180105220412.fzpwqe4zljdawr36@darkstar.musicnaut.iki.fi
Fixes: fa564ad963 ("x86/PCI: Enable a 64bit BAR on AMD Family 15h (Models 00-1f, 30-3f, 60-7f)")
Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Christian König <christian.koenig@amd.com>
[bhelgaas: changelog, comment, Fixes:]
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
2018-01-11 12:01:58 -06:00
=?UTF-8?q?Christian=20K=C3=B6nig?= f32ab75471 x86/PCI: Add "pci=big_root_window" option for AMD 64-bit windows
Only try to enable a 64-bit window on AMD CPUs when "pci=big_root_window"
is specified.

This taints the kernel because the new 64-bit window uses address space we
don't know anything about, and it may contain unreported devices or memory
that would conflict with the window.

The pci_amd_enable_64bit_bar() quirk that enables the window is specific to
AMD CPUs.  The generic solution would be to have the firmware enable the
window and describe it in the host bridge's _CRS method, or at least
describe it in the _PRS method so the OS would have the option of enabling
it.

Signed-off-by: Christian König <christian.koenig@amd.com>
[bhelgaas: changelog, extend doc, mention taint in dmesg]
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
2018-01-11 11:22:39 -06:00
Christian König a19e269613 x86/PCI: Only enable a 64bit BAR on single-socket AMD Family 15h
When we have a multi-socket system, each CPU core needs the same setup.
Since this is tricky to do in the fixup code, don't enable a 64bit BAR on
multi-socket systems for now.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-12-06 14:57:20 -06:00
Christian König 470195f82e x86/PCI: Fix infinite loop in search for 64bit BAR placement
Break the loop if we can't find some address space for a 64bit BAR.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-12-06 14:57:19 -06:00
Linus Torvalds 1b6115fbe3 pci-v4.15-changes
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaDFIdAAoJEFmIoMA60/r8Jg4P/3IrmMNVnpqmYEZ7lRSW7UQ3
 8jtupbzIkbPsIAEhbJ7xqO7zKx85j6Og+ZSOv4a8u/tS6cd1aVZu2PpWsTkacez0
 7nLGVCSL3HZi5qcrtOvb2Pmke18SUKSPxVYSgS2ajQavB1oKaY03FbHDWyWidCZx
 qxkeGZOiUDw5kSGkQWyks1WgB0dd76rVbPcrKKEJueGgrdSm+EdgdDv8eT6bZInZ
 uMrCmSjNYTQP0KASCJJvgYOtJbdwvP6NuQTxzOlU2G+H2SqsLRjsz4UUR8FF06T5
 cndpgpG3QSAZLx7wCeWTvRorTEYORzKMoyw/AUjhiGbRep9Zw0aKNvCC99E6xjyD
 FECrk6kCrqZs7l+LVXK4SwpBXCVjNgRoFAHBEKF2X3/SWUkUhHXZHCVvMQB8LQiS
 2p8VRoYWw2aCLkHCGynuzToUrD2P2Pjxe5n/13aYVJkyBNfQqqZ3l2YHiZdpDO3j
 rgG6RW0WCrpZxfb/0WAbPnQ2qpZAwDPO6hOW7dIfTZabFVXRIkBvNq53by/0MxvP
 jyOcMTsq2l8y46f3VgNPUAHj0f52HwfZA3PQRPh+MQDz5385BJklDRWtfVM7cQx9
 IoeGkq1zLLvpOh63he/jnnRELxDvNVcxND8lOkenJlObj9kK63hUEcXg/zEMS4w3
 oetLw9TqE32Jb7GfpVSw
 =j4L3
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

  - detach driver before tearing down procfs/sysfs (Alex Williamson)

  - disable PCIe services during shutdown (Sinan Kaya)

  - fix ASPM oops on systems with no Root Ports (Ard Biesheuvel)

  - fix ASPM LTR_L1.2_THRESHOLD programming (Bjorn Helgaas)

  - fix ASPM Common_Mode_Restore_Time computation (Bjorn Helgaas)

  - fix portdrv MSI/MSI-X vector allocation (Dongdong Liu, Bjorn
    Helgaas)

  - report non-fatal AER errors only to the affected endpoint (Gabriele
    Paoloni)

  - distribute bus numbers, MMIO, and I/O space among hotplug bridges to
    allow more devices to be hot-added (Mika Westerberg)

  - fix pciehp races during initialization and surprise link down (Mika
    Westerberg)

  - handle surprise-removed devices in PME handling (Qiang)

  - support resizable BARs for large graphics devices (Christian König)

  - expose SR-IOV offset, stride, and VF device ID via sysfs (Filippo
    Sironi)

  - create SR-IOV virtfn/physfn sysfs links before attaching driver
    (Stuart Hayes)

  - fix SR-IOV "ARI Capable Hierarchy" restore issue (Tony Nguyen)

  - enforce Kconfig IOV/REALLOC dependency (Sascha El-Sharkawy)

  - avoid slot reset if bridge itself is broken (Jan Glauber)

  - clean up pci_reset_function() path (Jan H. Schönherr)

  - make pci_map_rom() fail if the option ROM is invalid (Changbin Du)

  - convert timers to timer_setup() (Kees Cook)

  - move PCI_QUIRKS to PCI bus Kconfig menu (Randy Dunlap)

  - constify pci_dev_type and intel_mid_pci_ops (Bhumika Goyal)

  - remove unnecessary pci_dev, pci_bus, resource, pcibios_set_master()
    declarations (Bjorn Helgaas)

  - fix endpoint framework overflows and BUG()s (Dan Carpenter)

  - fix endpoint framework issues (Kishon Vijay Abraham I)

  - avoid broken Cavium CN8xxx bus reset behavior (David Daney)

  - extend Cavium ACS capability quirks (Vadim Lomovtsev)

  - support Synopsys DesignWare RC in ECAM mode (Ard Biesheuvel)

  - turn off dra7xx clocks cleanly on shutdown (Keerthy)

  - fix Faraday probe error path (Wei Yongjun)

  - support HiSilicon STB SoC PCIe host controller (Jianguo Sun)

  - fix Hyper-V interrupt affinity issue (Dexuan Cui)

  - remove useless ACPI warning for Hyper-V pass-through devices (Vitaly
    Kuznetsov)

  - support multiple MSI on iProc (Sandor Bodo-Merle)

  - support Layerscape LS1012a and LS1046a PCIe host controllers (Hou
    Zhiqiang)

  - fix Layerscape default error response (Minghuan Lian)

  - support MSI on Tango host controller (Marc Gonzalez)

  - support Tegra186 PCIe host controller (Manikanta Maddireddy)

  - use generic accessors on Tegra when possible (Thierry Reding)

  - support V3 Semiconductor PCI host controller (Linus Walleij)

* tag 'pci-v4.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (85 commits)
  PCI/ASPM: Add L1 Substates definitions
  PCI/ASPM: Reformat ASPM register definitions
  PCI/ASPM: Use correct capability pointer to program LTR_L1.2_THRESHOLD
  PCI/ASPM: Account for downstream device's Port Common_Mode_Restore_Time
  PCI: xgene: Rename xgene_pcie_probe_bridge() to xgene_pcie_probe()
  PCI: xilinx: Rename xilinx_pcie_link_is_up() to xilinx_pcie_link_up()
  PCI: altera: Rename altera_pcie_link_is_up() to altera_pcie_link_up()
  PCI: Fix kernel-doc build warning
  PCI: Fail pci_map_rom() if the option ROM is invalid
  PCI: Move pci_map_rom() error path
  PCI: Move PCI_QUIRKS to the PCI bus menu
  alpha/PCI: Make pdev_save_srm_config() static
  PCI: Remove unused declarations
  PCI: Remove redundant pci_dev, pci_bus, resource declarations
  PCI: Remove redundant pcibios_set_master() declarations
  PCI/PME: Handle invalid data when reading Root Status
  PCI: hv: Use effective affinity mask
  PCI: pciehp: Do not clear Presence Detect Changed during initialization
  PCI: pciehp: Fix race condition handling surprise link down
  PCI: Distribute available resources to hotplug-capable bridges
  ...
2017-11-15 15:01:28 -08:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Christian König fa564ad963 x86/PCI: Enable a 64bit BAR on AMD Family 15h (Models 00-1f, 30-3f, 60-7f)
Manually enable a 64GB 64-bit BAR so we have enough room for graphics
devices with large framebuffers.

Most BIOSes don't enable this for compatibility reasons.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2017-10-25 16:07:35 -05:00
Jon Derrick c37f23d44e x86/PCI: Use is_vmd() rather than relying on the domain number
Use the is_vmd() predicate to identify devices below a VMD host rather than
relying on the domain number.

Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-08-30 16:41:49 -05:00
Jon Derrick f1b0e54e16 x86/PCI: Move VMD quirk to x86 fixups
VMD currently only exists for Intel x86 products, so move the VMD quirk to
arch/x86.

Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-08-30 16:41:49 -05:00
Bjorn Helgaas 8cd9385034 Merge branch 'pci/resource' into next
* pci/resource:
  PCI: Work around poweroff & suspend-to-RAM issue on Macbook Pro 11
  PCI: Do not disregard parent resources starting at 0x0

Conflicts:
arch/x86/pci/fixup.c
2017-07-02 18:49:49 -05:00
Kai-Heng Feng 0bf3730bbc x86/PCI: Avoid AMD SB7xx EHCI USB wakeup defect
On an AMD Carrizo laptop, when EHCI runtime PM is enabled, EHCI ports do
not assert PME# for device plug/unplug events while in D3.

As Alan Stern points out [1], the PME signal is not enabled when controller
is in D3, therefore it's not being woken up when new devices get plugged
in.

Testing shows PME signal works when the EHCI power state is D2.

Clear the PCI_PM_CAP_PME_D3 and PCI_PM_CAP_PME_D3cold bits in
dev->pme_support to indicate the device will not assert PME# from those
states.

[1] http://lkml.kernel.org/r/Pine.LNX.4.44L0.1706121010010.2092-100000@iolanthe.rowland.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=196091
Link: https://support.amd.com/TechDocs/46837.pdf (Section 23)
Link: https://support.amd.com/TechDocs/42413.pdf (Appendix A2)
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
[bhelgaas: changelog, add parens in quirk]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-06-30 11:15:08 -05:00
Bjorn Helgaas 13cfc73216 PCI: Work around poweroff & suspend-to-RAM issue on Macbook Pro 11
Neither soft poweroff (transition to ACPI power state S5) nor
suspend-to-RAM (transition to state S3) works on the Macbook Pro 11,4 and
11,5.

The problem is related to the [mem 0x7fa00000-0x7fbfffff] space.  When we
use that space, e.g., by assigning it to the 00:1c.0 Root Port, the ACPI
Power Management 1 Control Register (PM1_CNT) at [io 0x1804] doesn't work
anymore.

Linux does a soft poweroff (transition to S5) by writing to PM1_CNT.  The
theory about why this doesn't work is:

  - The write to PM1_CNT causes an SMI
  - The BIOS SMI handler depends on something in
    [mem 0x7fa00000-0x7fbfffff]
  - When Linux assigns [mem 0x7fa00000-0x7fbfffff] to the 00:1c.0 Port, it
    covers up whatever the SMI handler uses, so the SMI handler no longer
    works correctly

Reserve the [mem 0x7fa00000-0x7fbfffff] space so we don't assign it to
anything.

This is voodoo programming, since we don't know what the real conflict is,
but we've failed to find the root cause.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=103211
Tested-by: thejoe@gmail.com
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Chen Yu <yu.c.chen@intel.com>
2017-06-28 16:03:38 -05:00
Bjorn Helgaas 6af7e4f772 PCI: Mark Haswell Power Control Unit as having non-compliant BARs
The Haswell Power Control Unit has a non-PCI register (CONFIG_TDP_NOMINAL)
where BAR 0 is supposed to be.  This is erratum HSE43 in the spec update
referenced below:

  The PCIe* Base Specification indicates that Configuration Space Headers
  have a base address register at offset 0x10.  Due to this erratum, the
  Power Control Unit's CONFIG_TDP_NOMINAL CSR (Bus 1; Device 30; Function
  3; Offset 0x10) is located where a base register is expected.

Mark the PCU as having non-compliant BARs so we don't try to probe any of
them.  There are no other BARs on this device.

Rename the quirk so it's not Broadwell-specific.

Link: http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v3-spec-update.html
Link: http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v3-datasheet-vol-2.html (section 5.4, Device 30 Function 3)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=153881
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Myron Stowe <myron.stowe@redhat.com>
2016-09-01 08:52:29 -05:00
Prarit Bhargava da77b67195 x86/PCI: Mark Broadwell-EP Home Agent 1 as having non-compliant BARs
Commit b894157145 ("x86/PCI: Mark Broadwell-EP Home Agent & PCU as having
non-compliant BARs") marked Home Agent 0 & PCU has having non-compliant
BARs.  Home Agent 1 also has non-compliant BARs.

Mark Home Agent 1 as having non-compliant BARs so the PCI core doesn't
touch them.

The problem with these devices is documented in the Xeon v4 specification
update:

  BDF2          PCI BARs in the Home Agent Will Return Non-Zero Values
                During Enumeration

  Problem:      During system initialization the Operating System may access
                the standard PCI BARs (Base Address Registers).  Due to
                this erratum, accesses to the Home Agent BAR registers (Bus
                1; Device 18; Function 0,4; Offsets (0x14-0x24) will return
                non-zero values.

  Implication:  The operating system may issue a warning.  Intel has not
                observed any functional failures due to this erratum.

Link: http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v4-spec-update.html
Fixes: b894157145 ("x86/PCI: Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs")
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Ingo Molnar <mingo@redhat.com>
CC: "H. Peter Anvin" <hpa@zytor.com>
CC: Andi Kleen <ak@linux.intel.com>
2016-05-16 15:47:51 -05:00
Bjorn Helgaas 0c0e0736ac PCI: Set ROM shadow location in arch code, not in PCI core
IORESOURCE_ROM_SHADOW means there is a copy of a device's option ROM in
RAM.  The existence of such a copy and its location are arch-specific.
Previously the IORESOURCE_ROM_SHADOW flag was set in arch code, but the
0xC0000-0xDFFFF location was hard-coded into the PCI core.

If we're using a shadow copy in RAM, disable the ROM BAR and release the
address space it was consuming.  Move the location information from the PCI
core to the arch code that sets IORESOURCE_ROM_SHADOW.  Save the location
of the RAM copy in the struct resource for PCI_ROM_RESOURCE.

After this change, pci_map_rom() will call pci_assign_resource() and
pci_enable_rom() for these IORESOURCE_ROM_SHADOW resources, which we did
not do before.  This is safe because:

  - pci_assign_resource() will do nothing because the resource is marked
    IORESOURCE_PCI_FIXED, which means we can't move it, and

  - pci_enable_rom() will not turn on the ROM BAR's enable bit because the
    resource is marked IORESOURCE_ROM_SHADOW, which means it is in RAM
    rather than in PCI memory space.

Storing the location in the struct resource means "lspci" will show the
shadow location, not the value from the ROM BAR.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-08 12:14:31 -06:00
Bjorn Helgaas 63e22924f5 PCI: Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXED
A shadow copy of an option ROM is placed by the BIOS as a fixed address.
Set IORESOURCE_PCI_FIXED to indicate that we can't move the shadow copy.
This prevents warnings like the following when we assign resources:

  BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment

This warning is emitted by pdev_sort_resources(), which already ignores
IORESOURCE_PCI_FIXED resources.

Link: http://lkml.kernel.org/r/CA+55aFyVMfTBB0oz_yx8+eQOEJnzGtCsYSj9QuhEpdZ9BHdq5A@mail.gmail.com
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-08 12:14:31 -06:00
Bjorn Helgaas b894157145 x86/PCI: Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs
The Home Agent and PCU PCI devices in Broadwell-EP have a non-BAR register
where a BAR should be.  We don't know what the side effects of sizing the
"BAR" would be, and we don't know what address space the "BAR" might appear
to describe.

Mark these devices as having non-compliant BARs so the PCI core doesn't
touch them.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Andi Kleen <ak@linux.intel.com>
CC: stable@vger.kernel.org
2016-03-08 12:13:57 -06:00
Bjorn Helgaas e6323e3c51 PCI: Fix generic NCR 53c810 class code quirk
In the generic quirk fixup_rev1_53c810(), added by a5312e28c1 ("[PATCH]
PCI: NCR 53c810 quirk"), we assigned "class = PCI_CLASS_STORAGE_SCSI".  But
PCI_CLASS_STORAGE_SCSI is only the two-byte base class/sub-class and needs
to be shifted to make space for the low-order interface byte.

Furthermore, we had a similar quirk, pci_fixup_ncr53c810(), for arch/x86,
which assigned class correctly.  The arch code is linked before the PCI
core, so arch quirks run before generic quirks.  Therefore, on x86, the x86
arch quirk ran first, and the generic quirk did nothing because it saw that
dev->class was already set.  But on other arches, the generic quirk set the
wrong class code.

Fix the generic quirk to set the correct class code and remove the
now-unnecessary x86-specific quirk.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Matthew Wilcox <matthew@wil.cx>
2015-07-14 13:39:44 -05:00
Bruno Prémont 86fd887b7f vgaarb: Don't default exclusively to first video device with mem+io
Commit 20cde69402 ("x86, ia64: Move EFI_FB vga_default_device()
initialization to pci_vga_fixup()") moved boot video device detection from
efifb to x86 and ia64 pci/fixup.c.

For dual-GPU Apple computers above change represents a regression as code
in efifb did forcefully override vga_default_device while the merge did not
(vgaarb happens prior to PCI fixup).

To improve on initial device selection by vgaarb (it cannot know if PCI
device not behind bridges see/decode legacy VGA I/O or not), move the
screen_info based check from pci_video_fixup() to vgaarb's init function and
use it to refine/override decision taken while adding the individual PCI
VGA devices.  This way PCI fixup has no reason to adjust vga_default_device
anymore but can depend on its value for flagging shadowed VBIOS.

This has the nice benefit of removing duplicated code but does introduce a
#if defined() block in vgaarb.  Not all architectures have screen_info and
would cause compile to fail without it.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=84461
Reported-and-Tested-By: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
CC: stable@vger.kernel.org # v3.5+
2014-09-16 13:06:18 -06:00
Bruno Prémont 20cde69402 x86, ia64: Move EFI_FB vga_default_device() initialization to pci_vga_fixup()
Commit b4aa016305 ("efifb: Implement vga_default_device() (v2)") added
efifb vga_default_device() so EFI systems that do not load shadow VBIOS or
setup VGA get proper value for boot_vga PCI sysfs attribute on the
corresponding PCI device.

Xorg doesn't detect devices when boot_vga=0, e.g., on some EFI systems such
as MacBookAir2,1.  Xorg detects the GPU and finds the DRI device but then
bails out with "no devices detected".

Note: When vga_default_device() is set boot_vga PCI sysfs attribute
reflects its state.  When unset this attribute is 1 whenever
IORESOURCE_ROM_SHADOW flag is set.

With introduction of sysfb/simplefb/simpledrm efifb is getting obsolete
while having native drivers for the GPU also makes selecting sysfb/efifb
optional.

Remove the efifb implementation of vga_default_device() and initialize
vgaarb's vga_default_device() with the PCI GPU that matches boot
screen_info in pci_fixup_video().

[bhelgaas: remove unused "dev" in efifb_setup()]
Fixes: b4aa016305 ("efifb: Implement vga_default_device() (v2)")
Tested-by: Anibal Francisco Martinez Cortina <linuxkid.zeuz@gmail.com>
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Matthew Garrett <matthew.garrett@nebula.com>
CC: stable@vger.kernel.org	# v3.5+
2014-07-10 16:48:48 -06:00
Bjorn Helgaas d1a2523d2a Merge branches 'pci/hotplug', 'pci/pci_is_bridge' and 'pci/virtualization' into next
* pci/hotplug:
  PCI: cpqphp: Fix possible null pointer dereference
  NVMe: Implement PCIe reset notification callback
  PCI: Notify driver before and after device reset

* pci/pci_is_bridge:
  pcmcia: Use pci_is_bridge() to simplify code
  PCI: pciehp: Use pci_is_bridge() to simplify code
  PCI: acpiphp: Use pci_is_bridge() to simplify code
  PCI: cpcihp: Use pci_is_bridge() to simplify code
  PCI: shpchp: Use pci_is_bridge() to simplify code
  PCI: rpaphp: Use pci_is_bridge() to simplify code
  sparc/PCI: Use pci_is_bridge() to simplify code
  powerpc/PCI: Use pci_is_bridge() to simplify code
  ia64/PCI: Use pci_is_bridge() to simplify code
  x86/PCI: Use pci_is_bridge() to simplify code
  PCI: Use pci_is_bridge() to simplify code
  PCI: Add new pci_is_bridge() interface
  PCI: Rename pci_is_bridge() to pci_has_subordinate()

* pci/virtualization:
  PCI: Introduce new device binding path using pci_dev.driver_override

Conflicts:
	drivers/pci/pci-sysfs.c
2014-05-28 16:21:07 -06:00
Yijing Wang 56a41f9949 x86/PCI: Use pci_is_bridge() to simplify code
Use pci_is_bridge() to simplify code.  No functional change.

Requires: 326c1cdae7 PCI: Rename pci_is_bridge() to pci_has_subordinate()
Requires: 1c86438c94 PCI: Add new pci_is_bridge() interface
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-05-27 14:56:34 -06:00
Bjorn Helgaas 44c8bdbe32 x86/PCI: Mark ATI SBx00 HPET BAR as IORESOURCE_PCI_FIXED
Bodo reported that on the Asrock M3A UCC, v3.12.6 hangs during boot unless
he uses "pci=nocrs".  This regression was caused by 7bc5e3f2be ("x86/PCI:
use host bridge _CRS info by default on 2008 and newer machines"), which
appeared in v2.6.34.

The reason is that the HPET address appears in a PCI device BAR, and this
address is not contained in any of the host bridge windows.  Linux moves
the PCI BAR into a window, but the original address was published via the
HPET table and an ACPI device, so changing the BAR is a bad idea.  Here's
the dmesg info:

  ACPI: HPET id: 0x43538301 base: 0xfed00000
  pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff]
  pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
  pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
  pci 0000:00:14.0: reg 14: [mem 0xfed00000-0xfed003ff]
  hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
  pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
  pnp 00:06: [mem 0xfed00000-0xfed003ff]

When we notice the BAR is not in a host bridge window, we try to move it,
but that causes a hang shortly thereafter:

  pci 0000:00:14.0: no compatible bridge window for [mem 0xfed00000-0xfed003ff]
  pci 0000:00:14.0: BAR 1: assigned [mem 0xf0000000-0xf00003ff]

This patch marks the BAR as IORESOURCE_PCI_FIXED to prevent Linux from
moving it.  This depends on a previous patch ("x86/PCI: Don't try to move
IORESOURCE_PCI_FIXED resources") to check for this flag when
pci_claim_resource() fails.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=68591
Reported-and-tested-by: Bodo Eggert <7eggert@gmx.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-04-25 11:09:04 -06:00
Bjorn Helgaas 94a5f850ae Merge branch 'pci/misc' into next
* pci/misc:
  PCI: Enable INTx if BIOS left them disabled
  ia64/PCI: Set IORESOURCE_ROM_SHADOW only for the default VGA device
  x86/PCI: Set IORESOURCE_ROM_SHADOW only for the default VGA device
  PCI: Update outdated comment for pcibios_bus_report_status()
  PCI: Cleanup per-arch list of object files
  PCI: cpqphp: Fix hex vs decimal typo in cpqhpc_probe()
  x86/PCI: Fix function definition whitespace
  x86/PCI: Reword comments
  x86/PCI: Remove unnecessary local variable initialization
  PCI: Remove unnecessary list_empty(&pci_pme_list) check
2014-02-18 17:02:04 -07:00
Sander Eikelenboom d8801e4df9 x86/PCI: Set IORESOURCE_ROM_SHADOW only for the default VGA device
Setting the IORESOURCE_ROM_SHADOW flag on a VGA card other than the primary
prevents it from reading its own ROM.  It will get the content of the
shadow ROM at C000 instead, which is of the primary VGA card and the driver
of the secondary card will bail out.

Fix this by checking if the arch code or vga-arbitration has already
determined the vga_default_device, if so only apply the fix to this primary
video device and let the comment reflect this.

[bhelgaas: add subject, split x86 & ia64 into separate patches]
Signed-off-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2014-02-14 12:35:19 -07:00
Bjorn Helgaas 8d7d818676 x86/PCI: Use pcibios_scan_root() instead of pci_scan_bus_with_sysdata()
pci_scan_bus_with_sysdata() and pcibios_scan_root() are quite similar:

  pci_scan_bus_with_sysdata
    pci_scan_bus_on_node(..., &pci_root_ops, -1)

  pcibios_scan_root
    pci_scan_bus_on_node(..., &pci_root_ops, get_mp_bus_to_node(busnum))

get_mp_bus_to_node() returns -1 if it couldn't find the node number, so
this removes pci_scan_bus_with_sysdata() and uses pcibios_scan_root()
instead.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-03 10:38:11 -07:00
Paul Gortmaker 663b55b9b3 x86: Delete non-required instances of include <linux/init.h>
None of these files are actually using any __init type directives
and hence don't need to include <linux/init.h>.  Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.

[ hpa: undid incorrect removal from arch/x86/kernel/head_32.S ]

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Link: http://lkml.kernel.org/r/1389054026-12947-1-git-send-email-paul.gortmaker@windriver.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2014-01-06 21:25:18 -08:00
Yijing Wang f8a26fe637 x86/pci: Use cached pci_dev->pcie_cap to simplify code
The PCI core caches the PCIe Capability offset in pci_dev->pcie_cap, so
use that instead of pci_find_capability().  Use pci_bus_set_ops() when
replacing the device pci_ops.  And use #defines instead of numeric
constants.

[bhelgaas: changelog, also use PCI_EXP_LNKCTL_ASPMC]
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-09-23 17:30:03 -06:00
Greg Kroah-Hartman a18e3690a5 X86: drivers: remove __dev* attributes.
CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitconst,
and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Daniel Drake <dsd@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-03 15:57:04 -08:00
Linus Torvalds f2fde3a65e Merge branch 'drm-core-next' of git://people.freedesktop.org/~airlied/linux
Pull main drm updates from Dave Airlie:
 "This is the main merge window request for the drm.

  It's big, but jam packed will lots of features and of course 0
  regressions.  (okay maybe there'll be one).

  Highlights:

   - new KMS drivers for server GPU chipsets: ast, mgag200 and cirrus
     (qemu only).  These drivers use the generic modesetting drivers.

   - initial prime/dma-buf support for i915, nouveau, radeon, udl and
     exynos

   - switcheroo audio support: so GPUs with HDMI can turn off the sound
     driver without crashing stuff.

   - There are some patches drifting outside drivers/gpu into x86 and
     EFI for better handling of multiple video adapters in Apple Macs,
     they've got correct acks except one trivial fixup.

   - Core:
	edid parser has better DMT and reduced blanking support,
	crtc properties,
	plane properties,

   - Drivers:
	exynos: add 2D core accel support, prime support, hdmi features
	intel: more Haswell support, initial Valleyview support, more
	    hdmi infoframe fixes, update MAINTAINERS for Daniel, lots of
	    cleanups and fixes
	radeon: more HDMI audio support, improved GPU lockup recovery
	    support, remove nested mutexes, less memory copying on PCIE, fix
	    bus master enable race (kexec), improved fence handling
	gma500: cleanups, 1080p support, acpi fixes
	nouveau: better nva3 memory reclocking, kepler accel (needs
	    external firmware rip), async buffer moves on nv84+ hw.

  I've some more dma-buf patches that rely on the dma-buf merge for vmap
  stuff, and I've a few fixes building up, but I'd decided I'd better
  get rid of the main pull sooner rather than later, so the audio guys
  are also unblocked."

Fix up trivial conflict due to some duplicated changes in
drivers/gpu/drm/i915/intel_ringbuffer.c

* 'drm-core-next' of git://people.freedesktop.org/~airlied/linux: (605 commits)
  drm/nouveau/nvd9: Fix GPIO initialisation sequence.
  drm/nouveau: Unregister switcheroo client on exit
  drm/nouveau: Check dsm on switcheroo unregister
  drm/nouveau: fix a minor annoyance in an output string
  drm/nouveau: turn a BUG into a WARN
  drm/nv50: decode PGRAPH DATA_ERROR = 0x24
  drm/nouveau/disp: fix dithering not being enabled on some eDP macbooks
  drm/nvd9/copy: initialise copy engine, seems to work like nvc0
  drm/nvc0/ttm: use copy engines for async buffer moves
  drm/nva3/ttm: use copy engine for async buffer moves
  drm/nv98/ttm: add in a (disabled) crypto engine buffer copy method
  drm/nv84/ttm: use crypto engine for async buffer copies
  drm/nouveau/ttm: untangle code to support accelerated buffer moves
  drm/nouveau/fbcon: use fence for sync, rather than notifier
  drm/nv98/crypt: non-stub implementation of the engine hooks
  drm/nouveau/fifo: turn all fifo modules into engine modules
  drm/nv50/graph: remove ability to do interrupt-driven context switching
  drm/nv50: remove manual context unload on context destruction
  drm/nv50: remove execution engine context saves on suspend
  drm/nv50/fifo: use hardware channel kickoff functionality
  ...
2012-05-24 12:42:54 -07:00
Alan Cox 80b3e55737 x86: Fix boot on Twinhead H12Y
Despite lots of investigation into why this is needed we don't
know or have an elegant cure. The only answer found on this
laptop is to mark a problem region as used so that Linux doesn't
put anything there.

Currently all the users add reserve= command lines and anyone
not knowing this needs to find the magic page that documents it.
Automate it instead.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Tested-and-bugfixed-by: Arne Fitzenreiter <arne@fitzenreiter.de>
Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=10231
Link: http://lkml.kernel.org/r/20120515174347.5109.94551.stgit@bluebook
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-17 20:04:00 +02:00
Dave Airlie db2e034d2c x86/vga: fix build with efi disabled.
Reported by sfr on -next merge.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-17 08:32:50 +01:00
Dave Airlie 6cf20beec4 x86/vga: set the default device from the fixup.
Since Matthew's efi/vga changes on non-EFI machines we were failing
to tell the vgaarb/switcheroo what the default device was, this
sets the default device in the quirk if none has been set before.

This fixes the switcheroo on my T410s.

Cc: Matthew Garrett <mjg@redhat.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-16 10:22:16 +01:00
Yinghai Lu 73e3b590f3 PCI: Use class for quirk for pci_fixup_video
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-24 14:34:46 -08:00
Yinghai Lu 4082cf2d7b PCI: Use class quirk for intel fix_transparent_bridge
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-24 14:34:45 -08:00
Linus Torvalds e76e5b2c66 Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (88 commits)
  PCI: fix HT MSI mapping fix
  PCI: don't enable too much HT MSI mapping
  x86/PCI: make pci=lastbus=255 work when acpi is on
  PCI: save and restore PCIe 2.0 registers
  PCI: update fakephp for bus_id removal
  PCI: fix kernel oops on bridge removal
  PCI: fix conflict between SR-IOV and config space sizing
  powerpc/PCI: include pci.h in powerpc MSI implementation
  PCI Hotplug: schedule fakephp for feature removal
  PCI Hotplug: rename legacy_fakephp to fakephp
  PCI Hotplug: restore fakephp interface with complete reimplementation
  PCI: Introduce /sys/bus/pci/devices/.../rescan
  PCI: Introduce /sys/bus/pci/devices/.../remove
  PCI: Introduce /sys/bus/pci/rescan
  PCI: Introduce pci_rescan_bus()
  PCI: do not enable bridges more than once
  PCI: do not initialize bridges more than once
  PCI: always scan child buses
  PCI: pci_scan_slot() returns newly found devices
  PCI: don't scan existing devices
  ...

Fix trivial append-only conflict in Documentation/feature-removal-schedule.txt
2009-04-01 09:47:12 -07:00
Yinghai Lu dfadd9edff PCI/x86: detect host bridge config space size w/o using quirks
Many host bridges support a 4k config space, so check them directy
instead of using quirks to add them.

We only need to do this extra check for host bridges at this point,
because only host bridges are known to have extended address space
without also having a PCI-X/PCI-E caps.  Other devices with this
property could be done with quirks (if there are any).

As a bonus, we can remove the quirks for AMD host bridges with family
10h and 11h since they're not needed any more.

With this patch, we can get correct pci cfg size of new Intel CPUs/IOHs
with host bridges.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Cc: <stable@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 10:48:17 -07:00
Jan Beulich 821508d4ef x86: move a few device initialization objects into .devinit.rodata
Impact: debuggability and micro-optimization

Putting whatever is possible into the (final) .rodata section increases
the likelihood of catching memory corruption bugs early, and reduces
false cache line sharing.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
LKML-Reference: <49B909A5.76E4.0078.0@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-12 13:12:19 +01:00
Jaswinder Singh Rajput 824877111c x86, pci: move arch/x86/pci/pci.h to arch/x86/include/asm/pci_x86.h
Impact: cleanup

Now that arch/x86/pci/pci.h is used in a number of other places as well,
move the lowlevel x86 pci definitions into the architecture include files.
(not to be confused with the existing arch/x86/include/asm/pci.h file,
which provides public details about x86 PCI)

Tested on: X86_32_UP, X86_32_SMP and X86_64_SMP

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-29 18:17:36 +01:00
Andreas Herrmann ffd565a8b8 x86: fixup config space size of CPU functions for AMD family 11h
Impact: extend allowed configuration space access on 11h CPUs from 256 to 4K

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-26 03:53:27 +01:00
Jordan Crouse d7451fca18 x86, hpet: SB600 - remove HPET resources from PCI device
Prevent the HPET resources from appearing in PCI device 14.0 which
confuses the PCI resource engine.

Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-14 18:24:38 +02:00
Bjorn Helgaas 12c0b20fa4 x86/PCI: use dev_printk when possible
Convert printks to use dev_printk().

I converted DBG() to dev_dbg().  This DBG() is from arch/x86/pci/pci.h and
requires source-code modification to enable, so dev_dbg() seems roughly
equivalent.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-28 15:32:26 -07:00
Yinghai Lu 70b9f7dc14 x86/pci: remove flag in pci_cfg_space_size_ext
so let pci_cfg_space_size call it directly without flag.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-04-29 15:34:05 -07:00