The PCM stop operation sets the stop_operating flag for indicating the
sync_stop post-process. This flag is, however, set unconditionally
even if the PCM trigger weren't issued. This may lead to
inconsistency in the driver side.
Correct the code to set stop_operating flag only after the trigger
STOP is actually called.
Fixes: 1e850beea2 ("ALSA: pcm: Add the support for sync-stop operation")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210206203656.15959-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current PCM code calls the sync_stop at the resume action due to
the analogy to the PCM prepare call pattern. But, it makes little
sense, as the sync should have been done rather at the suspend time,
not at the resume time.
This patch corrects the sync_stop call at suspend/resume to assure the
sync before finishing the suspend.
Fixes: 1e850beea2 ("ALSA: pcm: Add the support for sync-stop operation")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210206203656.15959-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The PCM core should perform the sync for the pending stop operations
at disconnection. Otherwise it may lead to unexpected access.
Currently the old user of sync_stop, USB-audio driver, has its own
sync, so this isn't needed, but it's better to guarantee the sync in
the PCM core level.
This patch adds the missing sync_stop call at PCM disconnection
callback. It also assures the IRQ sync if it's specified in the
card. snd_pcm_sync_stop() is slightly modified to be called also for
any PCM substream object now.
Fixes: 1e850beea2 ("ALSA: pcm: Add the support for sync-stop operation")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210206203656.15959-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In the later patch, we're going to issue the PCM sync_stop calls at
disconnection. But currently the USB-audio driver can't handle it
because it has a check of shutdown flag for stopping the URBs. This
is basically superfluous (the stopping URBs are safe at disconnection
state), so let's drop the check.
Fixes: dc5eafe778 ("ALSA: usb-audio: Support PCM sync_stop")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210206203052.15606-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The endpoint management has bit flags to indicate the current state,
and we're dealing two things: the running bit and the stopping bit.
There is a thin window in transition from the running to the stopping
in stop_urbs(), and as long as the bit flags are used, it's difficult
to plug.
This patch modifies the state management code to use the atomic int
and follow the explicit three states, STOPPED, RUNNING and STOPPING.
The state change is done via atomic_cmpxhg() for avoiding possible
races, and check the state change more strictly. The unexpected state
change is now handled as an error.
Fixes: d0f09d1e4a ("ALSA: usb-audio: Refactoring endpoint URB deactivation")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210206203052.15606-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When we stop an endpoint in release_urbs(), it ignores the
inconsistent endpoint state and tries to release the resources.
This shouldn't happen in theory, but it's still safer to abort the
release and let the caller proper error handling.
Also, stop_and_unlink_urbs() called from release_urbs() does two step
works, and it's more straightforward to split this to two functions
again, so that the call from the PCM trigger won't take the path with
sleeping.
This patch modifies the EP management code to adapt two points above.
Fixes: d0f09d1e4a ("ALSA: usb-audio: Refactoring endpoint URB deactivation")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210206203052.15606-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fireface UCX, UFX, and FF802 are categorized for latter protocol of the
series. Current support for FF802 (and UFX) includes failure to parse
sync status register and results in EIO.
Further investigation figures out that the content of register differs
depending on models. This commit adds tables specific to FF802 and UFX
to fix it.
Fixes: 062bb452b0 ("ALSA: fireface: add support for RME FireFace 802")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210207154736.229551-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The i915 display power is requested both by controller (for init
and link reset) as well as by codec driver (for codec control).
There's an additional constraint that on some platforms frequent changes
to display power state may cause visible flicker. To avoid this, the SOF
hda controller requests display power whenever it is active and only
releases it when runtime suspended.
This patch utilizes the new hdac_bus link_power op to plug
into HDA link state changes. By monitoring link state changes,
we can keep the controller side display power wakeref until
the codec driver has completed its work, and only release
the wakeref when codec driver is suspended.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210205184630.1938761-4-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Opt-in to use snd_hdac_ext_bus_link_power() to manage HDA link
power up/down events.
This allows to reduce power consumption in cases where some HDA codecs
are suspended, but other child devices (HDA or non-HDA codecs) remain
active and controller itself remains in active state.
By using snd_hdac_ext_bus_link_power(), the individual HDA links can be
powered off and if all HDA codecs are powered down, the command DMA can
also be shut down.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210205184630.1938761-3-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The extended HDA bus (hdac_ext) provides interfaces for more
fine-grained control of individual links than what plain HDA
provides for. Links can be powered off when they are not used and if
all links are released, controller can shut down the command DMA.
These interfaces are currently not used by common HDA codec drivers.
When a HDA codec is runtime suspended, it calls snd_hdac_codec_link_down(),
but there is no link to the HDA extended bus, and on controller side
the links are shut down only when all codecs are suspended.
This patch adds link_power() to hdac_bus ops. Controllers using the HDA
extended core, can use this to plug in snd_hdac_ext_bus_link_power() to
implement more fine-grained control of link power.
No change is needed for plain HDA controllers nor to existing HDA
codec drivers.
Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210205184630.1938761-2-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The 'imx' field is not used anywhere, so get rid of it.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20210206142753.536459-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The only usage of these is to assign their address to the 'ops' field in
the snd_soc_dai_driver struct, which is a pointer to const. Make them
const to allow the compiler to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20210206225849.51071-1-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Support ALSA IEC958 plugin for KeemBay I2S driver.
Bit manipulation needed as IEC958 format supported by ADV7511 HDMI chip
is not compatible with the ALSA IEC958 plugin format.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Link: https://lore.kernel.org/r/20210204014258.10197-5-jee.heng.sia@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Existing hdmi-codec driver only support standard pcm format.
Support of IEC958 encoded format pass from ALSA IEC958 plugin is needed
so that the IEC958 encoded data can be streamed to the HDMI chip.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Link: https://lore.kernel.org/r/20210204014258.10197-2-jee.heng.sia@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is cleanup required, related to release of phandles, during driver
removal and hence point remove callback to audio_graph_remove().
Fixes: 202e2f7745 ("ASoC: tegra: Add audio graph based card driver")
Depends-on: "ASoC: audio-graph: Rename functions needed for export"
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/1612719418-5858-3-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Following functions are renamed for a better global visibility.
graph_card_probe() --> audio_graph_card_probe()
graph_parse_of() --> audio_graph_parse_of()
graph_remove() --> audio_graph_remove() [exported as well]
The references of these are updated in audio graph and Tegra audio
graph card drivers.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/1612719418-5858-2-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function simple_write_to_buffer() doesn't add string termination
at the end of buf, we need to handle it on our own. This change refers
to the function tokenize_input() in debug.c and the function
sof_dfsentry_trace_filter_write() in trace.c.
Fixes: 091c12e1f5 ("ASoC: SOF: debug: add new debugfs entries for IPC flood test")
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210208103857.75705-1-hui.wang@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit adds mixer quirks for the Pioneer DJM-900NXS2 mixer. This
device has 6 capture channels, 5 of them allow setting the signal
source. This adds controls for these, similar to the DJM-250Mk2.
However, playpack channels are not controllable via software like on the
250Mk2, as they can only be set manually on the mixing console.
Read-only controls showing the currently selected playback channels are
omitted.
Signed-off-by: Fabian Lesniak <fabian@lesniak-it.de>
Link: https://lore.kernel.org/r/20210205215116.258724-2-fabian@lesniak-it.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This allows for N different devices to use the pioneer mixer quirk for
setting capture/record type and recording level. The impementation has
not changed much with the exception of an additional mask on
private_value to allow storing of a device index:
DEVICE MASK 0xff000000
GROUP_MASK 0x00ff0000
VALUE_MASK 0x0000ffff
This could be improved by changing the arrays of wValues for each
channel to contain named definitions (e.g. SND_DJM_CAP_LINE). It would
improve readability and perhaps would allow using the same array for
multiple channels. The channel number can be specified on the control
next to the wIndex.
Feedback is very much appreciated as I'm not the most proficient C
programmer but am learning as I go.
Signed-off-by: Olivia Mackintosh <livvy@base.nu>
Link: https://lore.kernel.org/r/20210205184256.10201-2-livvy@base.nu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit e7bbb7acab ("dmaengine: add peripheral configuration")
adds peripheral configuration for dma_slave_config.
This configuration is useful for some audio peripherals, for
example, the peripheral supports multi fifos, we can
let the DMA know which fifos are selected. So also add
this configuration for snd_dmaengine_dai_dma_data.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1612509985-11063-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix bitwidth mapping in i2s ctl register per APQ8016 document.
Fixes: b5022a36d2 ("ASoC: qcom: lpass: Use regmap_field for i2sctl and dmactl registers")
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Link: https://lore.kernel.org/r/20210201132941.460360-1-jun.nie@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The commit f274baa49b ("ALSA: usb-audio: Allow non-vmalloc buffer
for PCM buffers") introduced the mode to allocate coherent pages for
PCM buffers, and it used bus->controller device as its DMA device.
It turned out, however, that bus->sysdev is a more appropriate device
to be used for DMA mapping in HCD code.
This patch corrects the device reference accordingly.
Note that, on most platforms, both point to the very same device,
hence this patch doesn't change anything practically. But on
platforms like xhcd-plat hcd, the change becomes effective.
Fixes: f274baa49b ("ALSA: usb-audio: Allow non-vmalloc buffer for PCM buffers")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210205144559.29555-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add master clock generation support in STM32 I2S driver.
The master clock provided by I2S can be used to feed a codec.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://lore.kernel.org/r/20210205104404.18786-3-olivier.moysan@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
HP Spectre x360 convertible devices rely on a mixed SoundWire+DMIC
configuration which wasn't well supported. This lead to the discovery
that we missed the TGL_HDMI quirk on a number of Dell devices, the
addition of DMIC autodetection (based on NHLT tables), the addition of
new component strings needed by UCM, and work-arounds due to
problematic DSDT tables.
Bard Liao (1):
ASoC: Intel: sof_sdw: add trace for dai links
Guennadi Liakhovetski (1):
ASoC: SOF: Intel: HDA: don't keep a temporary variable
Pierre-Louis Bossart (11):
ASoC: Intel: sof_sdw: add missing TGL_HDMI quirk for Dell SKU 0A3E
ASoC: Intel: sof_sdw: add missing TGL_HDMI quirk for Dell SKU 0A5E
ASoC: Intel: sof_sdw: add missing TGL_HDMI quirk for Dell SKU 0A32
ASoC: Intel: sof_sdw: reorganize quirks by generation
ASoC: Intel: sof-sdw: indent and add quirks consistently
ASoC: Intel: sof_sdw: add quirk for HP Spectre x360 convertible
ASoC: Intel: sof_sdw: add mic:dmic and cfg-mics component strings
ASoC: Intel: soc-acpi: add ACPI matching table for HP Spectre x360
ASoC: SOF: Intel: SoundWire: refine ACPI match
ASoC: SOF: Intel: detect DMIC number in SoundWire mixed config
ASoC: SOF: Intel: hda: add dev_dbg() when DMIC number is overridden
Rander Wang (1):
ASoC: Intel: sof_sdw: detect DMIC number based on mach params
sound/soc/intel/boards/sof_sdw.c | 131 ++++++-----
.../intel/common/soc-acpi-intel-tgl-match.c | 20 ++
sound/soc/sof/intel/hda.c | 208 ++++++++++++------
3 files changed, 241 insertions(+), 118 deletions(-)
--
2.25.1
regcache sync will be done in sdw device suspend/resume functions.
And we have different jack detection mechanism for SoundWire.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210204201739.25206-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Follow pattern from other drivers and use cancel_work_sync() for both
.remove() and .suspend().
Fixes: 03f6fc6de9 ('ASoC: rt5682: Add the soundwire support')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Link: https://lore.kernel.org/r/20210204201739.25206-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make sure the workqueues are not running after the .remove() callback,
which can lead to timeout errors.
A previous fix to use cancel_work_sync was applied for the suspend
case but the remove case is missing
Fixes: 501ef01339 ('ASoC: rt711: wait for the delayed work to finish when the system suspends')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Link: https://lore.kernel.org/r/20210204201739.25206-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make sure the workqueues are not running after the .remove() callback,
which can lead to timeout errors.
A previous fix to use cancel_work_sync was applied for the suspend
case but the remove case is missing
Fixes: 5f2df2a458 ('ASoC: rt700: wait for the delayed work to finish when the system suspends')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Link: https://lore.kernel.org/r/20210204201739.25206-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We missed adding the TGL_HDMI quirk which is very much needed to
expose the 4 display pipelines and will be required on TGL topologies.
Fixes: e787f5b5b1 ('ASoC: Intel: add support for new SoundWire hardware layout on TGL')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210204203312.27112-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We missed adding the TGL_HDMI quirk which is very much needed to
expose the 4 display pipelines and will be required on TGL topologies.
Fixes: 488cdbd893 ('ASoC: Intel: sof_sdw: add quirk for new TigerLake-SDCA device')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210204203312.27112-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We missed adding the TGL_HDMI quirk which is very much needed to
expose the 4 display pipelines and will be required on TGL topologies.
Fixes: 9ad9bc59dd ('ASoC: Intel: sof_sdw: set proper flags for Dell TGL-H SKU 0A5E')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210204203312.27112-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The kerndoc comment for the new function snd_usb_endpoint_free_all()
had a typo wrt the argument name. Fix it.
Fixes: 00272c6182 ("ALSA: usb-audio: Avoid unnecessary interface re-setup")
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210205082837.6327-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The 1st and 2nd patch refactor to use asoc_substream_to_rtd().
The 3rd patch simplifies ops of Capture1 DAI link.
Changes from v2[1]:
- Fix typo in 3rd patch's title, s/simply/simplify/.
Changes from v1[2]:
- Separated from v1.
[1]: https://patchwork.kernel.org/project/alsa-devel/list/?series=420919
[2]: https://patchwork.kernel.org/project/alsa-devel/list/?series=419769
Tzung-Bi Shih (3):
ASoC: mediatek: mt8192-mt6359: use asoc_substream_to_rtd()
ASoC: mediatek: mt8192: use asoc_substream_to_rtd()
ASoC: mediatek: mt8192-mt6359: simplify ops for Capture1 DAI link
sound/soc/mediatek/mt8192/mt8192-afe-pcm.c | 4 ++--
.../mt8192/mt8192-mt6359-rt1015-rt5682.c | 24 ++++++++-----------
2 files changed, 12 insertions(+), 16 deletions(-)
--
2.30.0.365.g02bc693789-goog
This reverts commit a06cd8cf97 ("ASoC: da7218: skip of_device_id table
when !CONFIG_OF") because we want to make of_match_device() stop using
of_match_ptr() internally, confusing compilers and causing ifdef
pollution.
Reported-by: kernel test robot <lkp@intel.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210202192016.49028-1-swboyd@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-pcm has dpcm_runtime_merge_xxx() functions,
but uses parameters are very verbose.
dpcm_runtime_merge_format(..., &runtime->hw.formats);
dpcm_runtime_merge_chan(..., &runtime->hw.channels_min,
&runtime->hw.channels_max);
dpcm_runtime_merge_rate(..., &runtime->hw.rates,
&runtime->hw.rate_min,
&runtime->hw.rate_max);
We want to replace it into
dpcm_runtime_merge_format(..., runtime);
dpcm_runtime_merge_chan(..., runtime);
dpcm_runtime_merge_rate(..., runtime);
This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/874kj9aigd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_new_pcm() implementation is very long / verbose / complex,
thus, it is very difficult to read.
If we read it carefully, we can notice that it is consisted by
int soc_new_pcm(...)
{
(1) judging playback/caputre part
(2) creating the PCM part
(3) setup pcm/rtd part
}
This patch adds new soc_create_pcm() for (2) part
and offload it from snd_pcm_new().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875z3paigi.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_new_pcm() implementation is very long / verbose / complex,
thus, it is very difficult to read.
If we read it carefully, we can notice that it is consisted by
int soc_new_pcm(...)
{
(1) judging playback/caputre part
(2) creating the PCM part
(3) setup pcm/rtd part
}
This patch adds new soc_get_playback_capture() for (1) part
and offload it from soc_new_pcm().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877do5aign.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Eliminate the following coccicheck warning:
./sound/soc/intel/catpt/pcm.c:355:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/1612166481-121376-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The commit 2d670ea2bd ("ALSA: jack: implement software jack
injection via debugfs") introduced a debugfs root for each sound card
object. The debugfs entry gets removed at the card removal, too, but
it turned out that debugfs_remove() is called at a wrong place; it's
after the card object gets freed, hence it leads to use-after-free.
Fix it by moving the debugfs_remove() at the right place, the
destructor of the card device.
Fixes: 2d670ea2bd ("ALSA: jack: implement software jack injection via debugfs")
Reported-and-tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://lore.kernel.org/r/161228343605.1150.8862281636043446562@build.alporthouse.com
Link: https://lore.kernel.org/r/20210202225629.1965-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As the runtime PM issue was addressed by the recent fix 4961167bf7
("ALSA: hda/via: Apply the workaround generically for Clevo machines")
for VIA codecs, we need no longer to keep the Clevo device off from
the power saving as default. Drop the deny list entry accordingly.
Depends: 4961167bf7 ("ALSA: hda/via: Apply the workaround generically for Clevo machines")
Link: https://lore.kernel.org/r/20210202092744.20321-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As with most Pioneer devices, the device descriptor is vendor specific
and as such, the number of channels, the PCM format, endpoints and
sample rate need to be specified. This device has 8 inputs and 8 outputs
and a sample rate of 48000 only. The PCM format is S24_3LE like other
devices.
There seems to be an appetite for reducing duplication amongs these
Pioneer patches but again, I feel this is a step to be taken after
support has been added as it's not completely clear where the
commonalities are.
Signed-off-by: Olivia Mackintosh <livvy@base.nu>
Link: https://lore.kernel.org/r/20210202134225.3217-3-livvy@base.nu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like the DJM-750, ensure that the format control message is passed to
the device when opening a stream. It seems as though fmt->sync_ep is not
always set when this function is called hence the passing of the value
at the call site. If this can be fixed, fmt->sync_up should be used as
the wvalue.
There doesn't seem to be a "cpu_to_le24" type function defined hence for
the open code but I did see a similar thing done in Bluez lib. Perhaps
we can get these definitions defined in byteorder.h. See hci_cpu_to_le24
in include/net/bluetooth/hci.h:2543 for similar usage.
Signed-off-by: Olivia Mackintosh <livvy@base.nu>
Link: https://lore.kernel.org/r/20210202134225.3217-2-livvy@base.nu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Had a typo in lpass platform driver that resulted in crash
during suspend/resume with an HDMI dongle connected.
The regmap read/write/volatile regesters validation callbacks in lpass-cpu
were using MI2S rdma_channels count instead of hdmi_rdma_channels.
This typo error causing to read registers from the regmap beyond the length
of the mapping created by ioremap().
This fix avoids the need for reducing number hdmi_rdma_channels,
which is done in
commit 7dfe20ee92 ("ASoC: qcom: Fix number of HDMI RDMA channels on sc7180").
So reverting the same.
Fixes: 7cb37b7bd0 ("ASoC: qcom: Add support for lpass hdmi driver")
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Link: https://lore.kernel.org/r/20210202062727.22469-1-srivasam@codeaurora.org
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
When creating topology templates and overriding data in specific test
cases it should be done with cpu_to_le32 macro, so we operate on correct
data on all architectures, as topology parser use le32_to_cpu to parse
data from structures.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20210202163123.3942040-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DT properties "dmic-mode" and "mic-type-X" are optional. Reduces the
log verbosity and changes the message a bit to avoid misleading.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20210202033557.1621029-1-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixup BE DAI links channel count to match topology settings. Normally the
channel count of BE is equal to FE's so we don't have any issue. For some
cases like DSM with 2-channel FE and 4-channel BE the mismatch of BE and
topology will result in audio issues.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Keyon Jie <yang.jie@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210201092345.1214232-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All amba drivers return 0 in their remove callback. Together with the
driver core ignoring the return value anyhow, it doesn't make sense to
return a value here.
Change the remove prototype to return void, which makes it explicit that
returning an error value doesn't work as expected. This simplifies changing
the core remove callback to return void, too.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org> # for drivers/memory
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> # for hwtracing/coresight
Acked-By: Vinod Koul <vkoul@kernel.org> # for dmaengine
Acked-by: Guenter Roeck <linux@roeck-us.net> # for watchdog
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Takashi Iwai <tiwai@suse.de> # for sound
Acked-by: Vladimir Zapolskiy <vz@mleia.com> # for memory/pl172
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210126165835.687514-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
This change adds audio jack injection feature through debugfs, with
this feature, we could validate alsa userspace changes by injecting
plugin or plugout events to the non-phantom audio jacks.
With this change, the sound core will build the folders
$debugfs_mount_dir/sound/cardN if SND_DEBUG and DEBUG_FS are enabled.
And if users also enable the SND_JACK_INJECTION_DEBUG, the jack
injection nodes will be built in the folder cardN like below:
$tree $debugfs_mount_dir/sound
$debugfs_mount_dir/sound
├── card0
│ ├── HDMI_DP_pcm_10_Jack
│ │ ├── jackin_inject
│ │ ├── kctl_id
│ │ ├── mask_bits
│ │ ├── status
│ │ ├── sw_inject_enable
│ │ └── type
...
│ └── HDMI_DP_pcm_9_Jack
│ ├── jackin_inject
│ ├── kctl_id
│ ├── mask_bits
│ ├── status
│ ├── sw_inject_enable
│ └── type
└── card1
├── HDMI_DP_pcm_5_Jack
│ ├── jackin_inject
│ ├── kctl_id
│ ├── mask_bits
│ ├── status
│ ├── sw_inject_enable
│ └── type
...
├── Headphone_Jack
│ ├── jackin_inject
│ ├── kctl_id
│ ├── mask_bits
│ ├── status
│ ├── sw_inject_enable
│ └── type
└── Headset_Mic_Jack
├── jackin_inject
├── kctl_id
├── mask_bits
├── status
├── sw_inject_enable
└── type
The nodes kctl_id, mask_bits, status and type are read-only, users
could check jack or jack_kctl's information through them.
The nodes sw_inject_enable and jackin_inject are directly used for
injection. The sw_inject_enable is read-write, users could check if
software injection is enabled or not on this jack, and users could
echo 1 or 0 to enable or disable software injection on this jack. Once
the injection is enabled, the jack will not change by hardware events
anymore, once the injection is disabled, the jack will restore the
last reported hardware events to the jack. The jackin_inject is
write-only, if the injection is enabled, users could echo 1 or 0 to
this node to inject plugin or plugout events to this jack.
For the detailed usage information on these nodes, please refer to
Documentation/sound/designs/jack-injection.rst.
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210127085639.74954-2-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Output loopback is a feature where you can record what you hear.
The HDSP series of the RME interfaces provides this functionality
at the hardware level and this patch exposes controls to enable or
disable it per output (playback) channel.
This probably works on other cards but due to a lack of hardware
it is only tested and enabled for the HDSP9632 card with this patch.
Should this patch be accepted a separate patch will be posted to
https://github.com/alsa-project/alsa-tools/tree/master/hdspmixer
which adds "LPBK" buttons to each output in the playback strip for
the user to be able to control this feature from the user land.
Users from Windows tool TotalMixFX should be familiar with this.
Signed-off-by: Jasmin Fazlic <superfassl@gmail.com>
Link: https://lore.kernel.org/r/95cb3117-e85a-51a6-c2ce-bf736e70fc4c@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The correct mask is 0x1f8 (Bit 3-8), but due to missing BIT() 0xf (Bit
0-3) was set instead. This means setting of CPCAP_BIT_MIC1_RX_TIMESLOT0
(Bit 3) still worked (part of both masks). On the other hand the code
does not properly clear the other MIC timeslot bits. I think this
is not a problem, since they are probably initialized to 0 and not
touched by the driver anywhere else. But the mask also contains some
wrong bits, that will be cleared. Bit 0 (CPCAP_BIT_SMB_CDC) should be
safe, since the driver enforces it to be 0 anyways.
Bit 1-2 are CPCAP_BIT_FS_INV and CPCAP_BIT_CLK_INV. This means enabling
audio recording forces the codec into SND_SOC_DAIFMT_NB_NF mode, which
is obviously bad.
The bug probably remained undetected, because there are not many use
cases for routing microphone to the CPU on platforms using cpcap and
user base is small. I do remember having some issues with bad sound
quality when testing voice recording back when I wrote the driver.
It probably was this bug.
Fixes: f6cdf2d344 ("ASoC: cpcap: new codec")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210123172945.3958622-1-sre@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Audio Graph Card based Tegra driver is only useful on NVIDIA Tegra SoCs.
Hence add a dependency on SND_SOC_TEGRA, to prevent asking the user
about this driver when configuring a kernel without Tegra sound support.
Wrap all Tegra sound config options inside a big if/endif block, instead
of just adding the dependency to the single config option that does not
have it yet, to preventing similar future mistakes.
Fixes: 202e2f7745 ("ASoC: tegra: Add audio graph based card driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/20210129125915.2652952-1-geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
When there is no TLV data in topology, extracting the TLV data
could result in a NULL pointer exception. Prevent this by making
sure that the TLV data exists before extracting it.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210201093128.1226603-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When device_type == DEVICE_ALI, we should also check the return
value of pci_iomap() to avoid potential null pointer dereference.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20210131100916.7915-1-dinghao.liu@zju.edu.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The only usage of hdac_dev_attr_group is to put its address in an array
of pointers to const attribute_group structs. Make it const to allow the
compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20210131001241.2278-3-rikard.falkeborn@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The only usage of ac97_adapter_attr_group is to put its address in an
array of pointers to const attribute_group structs. Make it const to
allow the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20210131001241.2278-2-rikard.falkeborn@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
microblaze-linux-gcc (GCC) 9.3.0 complains about missing __ffssi2
symbol while using __builtin_ffs at runtime.
This is because arch/h8300 is compiled with -fno-builtin option.
so fallback and use kernel ffs() instead to all the arch builds happy!
Fixes: 1da0b9899a ("ASoC: soc-component: add snd_soc_component_read/write_field()")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210129100539.23459-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Series to refactor the DSP core management:
- move tracking of powered up DSP cores to common SOF code
- add logic filter unnecessary power actions
- modify existing implementations to use common code
whenever DSP cores are powered, so the state in common
code stays in sync
Bard Liao (5):
ASoC: SOF: Intel: hda: use snd_sof_dsp_core_power_up/down API
ASoC: SOF: Intel: hda-loader: keep init cores alive
ASoC: SOF: update dsp core power status in common APIs
ASoC: SOF: Filter out unneeded core power up/downs
ASoC: SOF: intel: hda-loader: use snd_sof_dsp_core_power_down/up APIs
sound/soc/sof/intel/hda-dsp.c | 2 +-
sound/soc/sof/intel/hda-loader.c | 9 +++++----
sound/soc/sof/intel/hda.c | 2 +-
sound/soc/sof/loader.c | 6 ------
sound/soc/sof/ops.h | 24 ++++++++++++++++++------
sound/soc/sof/pm.c | 1 -
sound/soc/sof/topology.c | 8 --------
7 files changed, 25 insertions(+), 27 deletions(-)
base-commit: e32df14235
--
2.29.2
The snd-soc-acpi-intel-match has duplicate module tags for all
platforms separately. Remove all but one and save some storage
space and cleanup modinfo output.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210128105751.1049837-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To manage enabled_cores_mask flag, we should always use snd_sof_dsp_
core_power_down/up APIs to power up/down dsp cores. The APIs do
a little bit more than the original functions, but it is harmless.
Suggested-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210128093850.1041387-6-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Exclude cores that are already powered on/off correctly. This allows to
simplify dsp_power_up/down() implementations and avoid unexpected error.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210128093850.1041387-5-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Only manage enabled_cores_mask in common snd_sof_dsp_core_power_up/down
APIs to ensure it stays in sync with actual DSP core state.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210128093850.1041387-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
init_core_mask should be the available cores mask after fw boot. So we
should keep not core 0 but init cores alive.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210128093850.1041387-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To implement common logic in SOF core, core power up/down flows should
use common SOF API and not directly use low-level platform specific
helper functions.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210128093850.1041387-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cancel the D0i3 work during runtime suspend as no streams are
active at this point anyway.
Fixes: 63e51fd33f ("ASoC: SOF: Intel: cnl: Implement feature to support DSP D0i3 in S0")
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210128092345.1033085-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No need of BCLK state maintenance from driver side as
clock_enable and clk_disable API's maintaing state counter.
One of the major issue was spotted when Headset jack inserted
while playback continues, due to same PCM device node opens twice
for playaback/capture and closes once for capture and playback continues.
It can resolve the errors in such scenarios.
Fixes: b182496822 ("ASoC: qcom: Fix enabling BCLK and LRCLK in LPAIF invalid state")
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210127151824.8929-1-srivasam@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The double negative makes it hard to read "if (!ACPI_FAILURE(status))".
Replace it with "if (ACPI_SUCCESS(status))".
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ADL will use sof-adl-s.ri if it is ADL-S platform. So let's use
the default_fw_filename in pdata->desc for the ADL FW filename.
Signed-off-by: Libin Yang <libin.yang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210125070500.807474-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd_soc_put_volsw in max98373_feedback_get is a typo, change it
to snd_soc_get_volsw.
Fixes: 349dd23931 ("ASoC: max98373: don't access volatile registers in bias level off")
Signed-off-by: Judy Hsiao <judyhsiao@google.com>
Link: https://lore.kernel.org/r/20210127135620.1143942-1-judyhsiao@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
It's often the case that we would write or read a particular field
in register. With the current soc_component apis, reading a particular
field in register would involve first read the register and then
perform shift operations.
Ex:
to read from a field mask of 0xf0
val = snd_soc_component_read(component, reg);
field = ((val & 0xf0) >> 0x4);
This is sometimes prone to errors and code become less readable!
With this new api we could just do
field = snd_soc_component_read_field(component, reg, 0xf0);
this makes it bit simple, easy to write and less error prone!
This also applies to writing!
There are various places in kernel which provides such field interfaces
however soc_component seems to be missing this.
This patch is inspired by FIELD_GET/FIELD_PREP macros in include/linux/bitfield.h
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210126171749.1863-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Enabling DMI L1 for capture streams could result in xruns during
pause/release. As pause/release is not a valid scenario for trace,
we can safely enable DMI L1 for it.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210127020737.1088960-3-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DMI L1 entry is currently disabled whenever any capture stream is
opened to prevent xruns during pause/release. But, in
order to maximise power savings for the wake-on-voice usecase,
DMI L1 entry should be enabled for D0i3-compatible capture streams.
Introduce a new field, flags in struct sof_intel_hda_stream
that stores whether a stream is dmi_l1_compatible. All playback streams,
and D0i3-compatible capture streams are DMI L1 compatible.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210127020737.1088960-2-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SOF firmware and topology files are not distributed via
linux-firmware. To help debugging cases where correct firmware is
not installed, print a pointer to the official upstream repository
for Sound Open Firmware releases.
BugLink: https://github.com/thesofproject/sof/issues/3665
Reported-by: Bruce Perens <bruce@perens.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Marc Herbert <marc.herbert@intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20210127122358.1014458-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
tgl_3_in_1_default link topology may be used by both TGL-LP and TGL-H.
Let's remove the sof_fw_filename setting in struct snd_soc_acpi_mach
and use the default_fw_filename setting in struct sof_dev_desc.
Signed-off-by: Libin Yang <libin.yang@intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Tested-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210125070500.807474-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The old code always uses sof_fw_filename in struct snd_soc_acpi_mach
as the firmware name. However, firmware name should depend on the platform
instead of the machine. For example, different machines may use the same
soundwire link topology, but they are using the different firmware. In this
case, it's hard to determine in struct snd_soc_acpi_mach which firmware it
should use.
Signed-off-by: Libin Yang <libin.yang@intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Tested-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210125070500.807474-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A const prefix was put wrongly in the middle at the code refactoring
commit 932eaf7c79 ("ASoC: sh: siu_pcm: remove snd_pcm_ops"), which
leads to a build error as:
sound/soc/sh/siu_pcm.c:546:8: error: expected '{' before 'const'
Also, another inconsistency is that the declaration of siu_component
misses the const prefix.
This patch corrects both failures.
Fixes: 932eaf7c79 ("ASoC: sh: siu_pcm: remove snd_pcm_ops")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20210126154702.3974-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
More fixes for v5.11, almost all driver specific issues including new
device IDs - there's one error handling fix for the topology stuff too.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmAQCxMACgkQJNaLcl1U
h9CmOwf8DWMyWBjrGyWQj6x428W+3abz/rIdyjA09H6cZoriZ9nLqerDQLmFrh/u
jFvCSdla0FDE8uw33nWp9KC5KBH99JdKE9uGTMhwn/kQuOackrw6tRw7SUOwykGr
MfT7Dlge8P3lwjV7/s/VrXpy0I/RTUbw1fELMn8ArqcQxO5qV32JFOWOAYIcwH+l
vAPFP8ZR/aJJ42nT5TZdQTc2gEchE2KJGhmgWNu6hWLHxznW36lYIf+76DWoEcI7
pdD8MmRVyutsauaOdJj3y7LJrmUyE/f6vS9opSfiskKAvd8fq5TMP+wzMvYVwpsP
5MJVW1uVIOYzsb1DRMridM43SRon+g==
=L8rT
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.11-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.11
More fixes for v5.11, almost all driver specific issues including new
device IDs - there's one error handling fix for the topology stuff too.
The driver core ignores the return value of the remove callback, so
don't give isa drivers the chance to provide a value.
Adapt all isa_drivers with a remove callbacks accordingly; they all
return 0 unconditionally anyhow.
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for drivers/net/can/sja1000/tscan1.c
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Acked-by: Wolfram Sang <wsa@kernel.org> # for drivers/i2c/
Reviewed-by: Takashi Iway <tiwai@suse.de> # for sound/
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for drivers/media/
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Link: https://lore.kernel.org/r/20210122092449.426097-4-uwe@kleine-koenig.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The "chip" can't be NULL in hda_tegra_runtime_resume() because code would
crash otherwise. Let's remove the unnecessary check in order to clean up
code a tad.
Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30 audio works
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30 boot-tested
Suggested-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210120003154.26749-4-digetx@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reset hardware on RPM-resume in order to bring it into a predictable
state.
Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30 audio works
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30 boot-tested
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # TK1 boot-tested
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210120003154.26749-3-digetx@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use clk_bulk helpers to make code cleaner. Note that this patch changed
the order in which clocks are enabled to make code look nicer, but this
doesn't matter in terms of hardware.
Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30 audio works
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30 boot-tested
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # TK1 boot-tested
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210120003154.26749-2-digetx@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Drivers in ALSA firewire stack supports eventing to userspace
applications via ALSA hwdep interface. All of the drivers supports stream
lock events. Some of them supports their unique events according to
specification of target device.
ALSA bebob driver supports the stream lock event only. In the case, it's
enough to check condition only in loop with process blocking. However,
current implementation check it again after breaking the loop.
This commit removes the redundant check.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210125140208.26318-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Assert hardware resets before clocks are enabled and then de-assert them
after clocks are enabled. This brings hardware into a predictable state.
Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30 audio works
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30 boot-tested
Tested-by: Dmitry Osipenko <digetx@gmail.com> # Nexus7 T30 audio works
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # TK1 boot-tested
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210120003154.26749-7-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
AHUB driver misses D_AUDIO and APBIF resets. CPU hangs on trying to
access hardware if resets aren't de-asserted. This problem is currently
masked by the tegra-clk driver which implicitly de-asserts the resets when
the corresponding clocks are enabled. Soon the implicit de-assertion will
be gone from the tegra-clk driver, thus we need to fix the AHUB driver.
Add the missing resets to the driver.
Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30 audio works
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30 boot-tested
Tested-by: Dmitry Osipenko <digetx@gmail.com> # Nexus7 T30 audio works
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # TK1 boot-tested
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210120003154.26749-5-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We've had several reports of broken dependencies. The 'right' fix is
to revisit the module dependencies as suggested by Arnd Bergmann. This
is WIP at https://github.com/thesofproject/linux/pull/2683. Since this
is taking longer than expected, I am only sharing quick fixes for now.
Pierre-Louis Bossart (2):
ASoC: SOF: Intel: soundwire: fix select/depend unmet dependencies
ASoC: SOF: SND_INTEL_DSP_CONFIG dependency
sound/soc/sof/intel/Kconfig | 3 ++-
sound/soc/sof/sof-acpi-dev.c | 11 ++++++-----
sound/soc/sof/sof-pci-dev.c | 10 ++++++----
3 files changed, 14 insertions(+), 10 deletions(-)
--
2.25.1
Smatch complains that "count" is not clamped when "ff->dev_lock_changed"
and it leads to an information leak. Fortunately, that's not actually
possible and the condition can be deleted.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/YA6n6I8EcNAO5ZFs@mwanda
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Smatch complains that "count" isn't clamped properly and
"oxfw->dev_lock_changed" is false then it leads to an information
leak. But it turns out that "oxfw->dev_lock_changed" is always
set and the condition can be removed.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/YA6ntkBxT/4DJ4YK@mwanda
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add flag "SOF_RT711_JD_SRC_JD2", flag "SOF_RT715_DAI_ID_FIX"
and "SOF_SDW_FOUR_SPK" to the Dell TGL-H based SKU "0A5E".
Signed-off-by: Libin Yang <libin.yang@intel.com>
Co-developed-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210125081117.814488-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The "dai_id" given into LPAIF_INTFDMA_REG(...) is already the real
DAI ID, not an index into v->dai_driver. Looking it up again seems
entirely redundant.
For IPQ806x (and SC7180 since commit 09a4f6f5d2
("ASoC: dt-bindings: lpass: Fix and common up lpass dai ids") this is
now often an out-of-bounds read because the indexes in the "dai_driver"
array no longer match the actual DAI ID.
Cc: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes: 7cb37b7bd0 ("ASoC: qcom: Add support for lpass hdmi driver")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210125104442.135899-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
MT8192 determines the I2S clock rates according to the sampling rates.
There is only 1 set of I2S in between MT8192 and RT5682. If playing and
capturing via RT5682 in different sampling rates, the I2S data will be
corrupted.
Adds format constraints to the corresponding DAI links to make sure the
sampling rates are symmetric.
Fixes: 18b13ff23f ("ASoC: mediatek: mt8192: add machine driver with mt6359, rt1015 and rt5682")
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20210125061453.1056535-1-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Reset (aka power off) happens when the reset gpio is made active.
Change function name to ak4458_reset to match devicetree property "reset-gpios"
Signed-off-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/ce650f47-4ff6-e486-7846-cc3d033f3601@blennerhassett.gen.nz
Signed-off-by: Mark Brown <broonie@kernel.org>
The sof-pci-dev driver fails to link when built into the kernel
and CONFIG_SND_INTEL_DSP_CONFIG is set to =m:
arm-linux-gnueabi-ld: sound/soc/sof/sof-pci-dev.o: in function `sof_pci_probe':
sof-pci-dev.c:(.text+0x1c): undefined reference to `snd_intel_dsp_driver_probe'
As a temporary fix, use IS_REACHABLE to prevent the problem from
happening. A more complete solution is to move this code to
Intel-specific parts, restructure the drivers and Kconfig as discussed
with Arnd Bergmann and Takashi Iwai.
Fixes: 82d9d54a6c ("ALSA: hda: add Intel DSP configuration / probe code")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210122005725.94163-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The LKP bot reports the following issue:
WARNING: unmet direct dependencies detected for SOUNDWIRE_INTEL
Depends on [m]: SOUNDWIRE [=m] && ACPI [=y] && SND_SOC [=y]
Selected by [y]:
- SND_SOC_SOF_INTEL_SOUNDWIRE [=y] && SOUND [=y] && !UML &&
SND [=y] && SND_SOC [=y] && SND_SOC_SOF_TOPLEVEL [=y] &&
SND_SOC_SOF_INTEL_TOPLEVEL [=y] && SND_SOC_SOF_INTEL_PCI [=y]
This comes from having tristates being configured independently, when
in practice the CONFIG_SOUNDWIRE needs to be aligned with the SOF
choices: when the SOF code is compiled as built-in, the
CONFIG_SOUNDWIRE also needs to be 'y'.
The easiest fix is to replace the 'depends' with a 'select' and have a
single user selection to activate SoundWire on Intel platforms. This
still allows regmap to be compiled independently as a module.
This is just a temporary fix, the select/depend usage will be
revisited and the SOF Kconfig re-organized, as suggested by Arnd
Bergman.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: a115ab9b8b ('ASoC: SOF: Intel: add build support for SoundWire')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210122005725.94163-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds support for the Nintendo 64 console's sound.
Signed-off-by: Lauri Kasanen <cand@gmx.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Adding PCI id for TGL-H. Like for other TGL platforms, SOF is used if
Soundwire codecs or PCH-DMIC is detected.
Signed-off-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Xiuli Pan <xiuli.pan@intel.com>
Reviewed-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210125083051.828205-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recently introduced sample rate validation code seems causing a
problem on some devices; namely, after performing this, the bus gets
screwed and it influences even on other USB devices.
As a quick workaround, perform it only for the necessary devices;
currently MOTU devices are known to need the valid altset checks, so
filter out other devices.
Fixes: 93db51d06b ("ALSA: usb-audio: Check valid altsetting at parsing rates for UAC2/3")
Reported-by: Jamie Heilman <jamie@audible.transient.net>
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1178203
Link: https://lore.kernel.org/r/20210123155842.22652-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The fix for a long-standing USB-audio bug required one more dependency
variable to be added to the hw constraints. Unfortunately I didn't
realize at debugging that the new addition may result in the overflow
of the dependency array of each snd_pcm_hw_rule (up to three plus a
sentinel), because USB-audio driver adds one more dependency only for
a certain device and bus, hence it works as is for many devices. But
in a bad case, a simple open always results in -EINVAL (with kernel
WARNING if CONFIG_SND_DEBUG is set) no matter what is passed.
Since the dependencies are real and unavoidable (USB-audio restricts
the hw_params per looping over the format/rate/channels combos), the
only good solution seems to raise the bar for one more dependency for
snd_pcm_hw_rule -- so does this patch: now the hw constraint
dependencies can be up to four.
Fixes: 506c203cc3 ("ALSA: usb-audio: Fix hw constraints dependencies")
Reported-by: Jamie Heilman <jamie@audible.transient.net>
Link: https://lore.kernel.org/r/20210123155730.22576-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Clear struct snd_ctl_elem_value before calling ->put() to avoid any data
leak.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210121171644.131059-2-ribalda@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Topology API exposes just 2 function calls, to load and unload topology.
This adds sanity checks to make sure that it behaves well when some of
parameters are set incoorectly or not needed.
This makes developer live easier by failing early instead of proceeding
on and then failing in unexpected ways.
As loading and unloading topology usually happens one the overhead of
additional checks should be negligible.
Amadeusz Sławiński (2):
ASoC: topology: Ensure that needed parameters are set
ASoC: topology: Check if ops is set before dereference
sound/soc/soc-topology.c | 22 +++++++++++++++-------
1 file changed, 15 insertions(+), 7 deletions(-)
--
2.25.1
This series adds unit tests for ASoC topology.
First fix problems found when developing and running test cases and
then add tests implementation.
Tests themselves are quite simple and just call
snd_soc_tplg_component_load() with various parameters and check the
result. Tests themselves are described in more detail in commits
adding them.
Goal is to expand the amount of test cases in following patches.
Prerequisity for this patchset are 2 patches which have already been
sent:
https://lore.kernel.org/alsa-devel/20210114163602.911205-1-amadeuszx.slawinski@linux.intel.com/T/#t
Description on how typical test case itself works:
In order to load topology we need to have 3 things:
card, codec component & platform component.
In typical test case we register card and platform component and bind
to dummy codec. There are of course execeptions, when we want to
test behaviour of topology API when component or card is missing.
Note that this is bit different from typical scenario (in SOF and skylake
drivers) where card is registered by machine driver and component by
platform driver, as we register both when setting up test.
If you check the test case most of them have similar architecture of:
1.
/* run test */
ret = snd_soc_register_card(&kunit_comp->card);
if (ret != 0 && ret != -EPROBE_DEFER)
KUNIT_FAIL(test, "Failed to register card");
2.
ret = snd_soc_component_initialize(&kunit_comp->comp, &test_component, test_dev);
KUNIT_EXPECT_EQ(test, 0, ret);
3.
ret = snd_soc_add_component(&kunit_comp->comp, NULL, 0);
KUNIT_EXPECT_EQ(test, 0, ret);
Ad. 1.
First we register card, which in most tests returns -EPROBE_DEFER
(from snd_soc_bind_card()), as platform component is not yet created.
I test for both 0 and -EPROBE_DEFER, as it makes it easier to reshuffle
this code around if needed and there is one test case which does it in
different order.
Ad. 2.
Then we initialize platform component with structure pointing at proper
probe function, which calls snd_soc_tplg_component_load() with test
parameters and checks expected result.
Ad. 3.
And then in follow up we call snd_soc_add_component() which creates
platform component for us and calls snd_soc_try_rebind_card() which
if everything is bound properly calls previously set probe function.
Amadeusz Sławiński (5):
ASoC: topology: Properly unregister DAI on removal
Revert "ASoC: soc-devres: add devm_snd_soc_register_dai()"
ASoC: topology: KUnit: Add KUnit tests passing various arguments to
snd_soc_tplg_component_load
ASoC: topology: KUnit: Add KUnit tests passing empty topology with
variants to snd_soc_tplg_component_load
ASoC: topology: KUnit: Add KUnit tests passing topology with PCM to
snd_soc_tplg_component_load
include/sound/soc.h | 4 -
sound/soc/Kconfig | 17 +
sound/soc/Makefile | 5 +
sound/soc/soc-devres.c | 37 --
sound/soc/soc-topology-test.c | 843 ++++++++++++++++++++++++++++++++++
sound/soc/soc-topology.c | 9 +-
6 files changed, 870 insertions(+), 45 deletions(-)
create mode 100644 sound/soc/soc-topology-test.c
--
2.25.1
The application circuit shall provide MICVDD power.
In default, the codec driver doesn't need to enable LDO2.
In case, a board wants to use VBAT for micbias,
it should add a DAPM route which IN1P connects with LDO2 in the machine driver.
e.g. { "IN1P", NULL, "LDO2" },
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20210121100353.6402-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_pcm_params_symmetry() checks rate/channel/sample_bits state.
These are very similar but different, thus, it needs to have very
verbose code.
This patch use macro for it and make code more simple.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878s8un6si.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_pcm_apply_symmetry() want to call snd_pcm_hw_constraint_single()
for rate/channel/sample_bits, but, it needs many condition checks.
These are very similar but different, thus, it needs to have very
verbose code.
This patch use macro for it and make code more simple.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a6tan6sm.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai