Calculate and set UDP source port based on the flow label. If flow label
is not defined in GRH then calculate it based on lqpn/rqpn.
Link: https://lore.kernel.org/r/20220106180359.2915060-2-yanjun.zhu@linux.dev
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add a new implementation for mmap by using the new mmap entry API. This
makes way for further use of the dynamic mmap allocator in this driver.
Link: https://lore.kernel.org/r/20211028105640.1056-1-liangwenpeng@huawei.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
ib_dma_map_sgtable_attrs() should be mapping the sgls and setting nents
but the ib_uses_virt_dma() path falls back to ib_dma_virt_map_sg() which
will not set the nents in the sgtable.
Check the return value (per the map_sg calling convention) and set
sgt->nents appropriately on success.
Fixes: 79fbd3e124 ("RDMA: Use the sg_table directly and remove the opencoded version from umem")
Link: https://lore.kernel.org/r/20211013165942.89806-1-logang@deltatee.com
Reported-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Tested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add support for ib callback modify_op_stat() to add or remove an optional
counter. When adding, a steering flow table is created with a rule that
catches and counts all the matching packets. When removing, the table and
flow counter are destroyed.
Link: https://lore.kernel.org/r/20211008122439.166063-13-markzhang@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
An optional counter is a driver-specific counter that may be dynamically
enabled/disabled. This enhancement allows drivers to expose counters
which are, for example, mutually exclusive and cannot be enabled at the
same time, counters that might degrades performance, optional debug
counters, etc.
Optional counters are marked with IB_STAT_FLAG_OPTIONAL flag. They are not
exported in sysfs, and must be at the end of all stats, otherwise the
attr->show() in sysfs would get wrong indexes for hwcounters that are
behind optional counters.
Link: https://lore.kernel.org/r/20211008122439.166063-7-markzhang@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Signed-off-by: Neta Ostrovsky <netao@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add a bitmap in rdma_hw_stat structure, with each bit indicates whether
the corresponding counter is currently disabled or not. By default
hwcounters are enabled.
Link: https://lore.kernel.org/r/20211008122439.166063-6-markzhang@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add a new API rdma_free_hw_stats_struct to pair with
rdma_alloc_hw_stats_struct (which is also de-inlined).
This will be useful when there are more alloc/free works in following
patches.
Link: https://lore.kernel.org/r/20211008122439.166063-5-markzhang@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add a counter statistic descriptor structure in rdma_hw_stats. In addition
to the counter name, more meta-information will be added. This code
extension is needed for optional-counter support in the following patches.
Link: https://lore.kernel.org/r/20211008122439.166063-4-markzhang@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
From Maor Gottlieb
====================
Fix the use of nents and orig_nents in the sg table append helpers. The
nents should be used by the DMA layer to store the number of DMA mapped
sges, the orig_nents is the number of CPU sges.
Since the sg append logic doesn't always create a SGL with exactly
orig_nents entries store a total_nents as well to allow the table to be
properly free'd and reorganize the freeing logic to share across all the
use cases.
====================
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
* 'sg_nents':
RDMA: Use the sg_table directly and remove the opencoded version from umem
lib/scatterlist: Fix wrong update of orig_nents
lib/scatterlist: Provide a dedicated function to support table append
This allows using the normal sg_table APIs and makes all the code
cleaner. Remove sgt, nents and nmapd from ib_umem.
Link: https://lore.kernel.org/r/20210824142531.3877007-4-maorg@nvidia.com
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The low-level create QP function grew to be larger than any sensible
inline function should be. The inline attribute is not really needed for
that function and can be implemented as exported symbol.
Link: https://lore.kernel.org/r/2c08709d86f876c3dfb77684357b2a939e570ca4.1628014762.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Convert QP object to follow IB/core general allocation scheme. That
change allows us to make sure that restrack properly kref the memory.
Link: https://lore.kernel.org/r/48e767124758aeecc433360ddd85eaa6325b34d9.1627040189.git.leonro@nvidia.com
Reviewed-by: Gal Pressman <galpress@amazon.com> #efa
Tested-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> #rdma and core
Tested-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
pahole shows two 4-byte holes in struct ib_port_data after pkey_list_lock
and netdev_lock respectively.
Shuffling the netdev_lock to be after pkey_list_lock, this shaves off
eight bytes from the struct.
Link: https://lore.kernel.org/r/20210616154509.1047-3-anand.a.khoje@oracle.com
Suggested-by: Haakon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Anand Khoje <anand.a.khoje@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Relaxed Ordering is a capability that can only benefit users that support
it. All kernel ULPs should support Relaxed Ordering, as they are designed
to read data only after observing the CQE and use the DMA API correctly.
Hence, implicitly enable Relaxed Ordering by default for MR transfers in
kernel ULPs.
Link: https://lore.kernel.org/r/b7e820aab7402b8efa63605f4ea465831b3b1e5e.1623236426.git.leonro@nvidia.com
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
init_port was only being used to register sysfs attributes against the
port kobject. Now that all users are creating static attribute_group's we
can simply set the attribute_group list in the ops and the core code can
just handle it directly.
This makes all the sysfs management quite straightforward and prevents any
driver from abusing the naked port kobject in future because no driver
code can access it.
Link: https://lore.kernel.org/r/114f68f3d921460eafe14cea5a80ca65d81729c3.1623427137.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Instead of calling device_add_groups() add the group to the existing
groups array which is managed through device_add().
This requires setting up the hw_counters before device_add(), so it gets
split up from the already split port sysfs flow.
Move all the memory freeing to the release function.
Link: https://lore.kernel.org/r/666250d937b64f6fdf45da9e2dc0b6e5e4f7abd8.1623427137.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This code creates a 'struct hw_stats_attribute' for each sysfs entry that
contains a naked 'struct attribute' inside.
It then proceeds to attach this same structure to a 'struct device' kobj
and a 'struct ib_port' kobj. However, this violates the typing
requirements. 'struct device' requires the attribute to be a 'struct
device_attribute' and 'struct ib_port' requires the attribute to be
'struct port_attribute'.
This happens to work because the show/store function pointers in all three
structures happen to be at the same offset and happen to be nearly the
same signature. This means when container_of() was used to go between the
wrong two types it still managed to work.
However clang CFI detection notices that the function pointers have a
slightly different signature. As with show/store this was only working
because the device and port struct layouts happened to have the kobj at
the front.
Correct this by have two independent sets of data structures for the port
and device case. The two different attributes correctly include the
port/device_attribute struct and everything from there up is kept
split. The show/store function call chains start with device/port unique
functions that invoke a common show/store function pointer.
Link: https://lore.kernel.org/r/a8b3864b4e722aed3657512af6aa47dc3c5033be.1623427137.git.leonro@nvidia.com
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
It is much saner to store a pointer to the kobject structure that contains
the cannonical stats pointer than to copy the stats pointers into a public
structure.
Future patches will require the sysfs pointer for other purposes.
Link: https://lore.kernel.org/r/f90551dfd296cde1cb507bbef27cca9891d19871.1623427137.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This is being used to implement both the port and device global stats,
which is causing some confusion in the drivers. For instance EFA and i40iw
both seem to be misusing the device stats.
Split it into two ops so drivers that don't support one or the other can
leave the op NULL'd, making the calling code a little simpler to
understand.
Link: https://lore.kernel.org/r/1955c154197b2a159adc2dc97266ddc74afe420c.1623427137.git.leonro@nvidia.com
Tested-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The declaration of struct ib_grh is uncessary here, because it is defined
at line 766.
Link: https://lore.kernel.org/r/20210510062843.15707-1-wanjiabing@vivo.com
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In order to track SRQ resources, a new restrack object is initialized and
added to the resource tracking database.
Link: https://lore.kernel.org/r/0db71c409f24f2f6b019bf8797a8fed96fe7079c.1618753110.git.leonro@nvidia.com
Signed-off-by: Neta Ostrovsky <netao@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The current rdma_netdev handling in ipoib hooks the tx_timeout handler,
but prints out a totally useless message that prevents effective debugging
especially when multiple transmit queues are being used.
Add a tx_timeout rdma_netdev hook and implement the callback in the hfi1
to print additional information.
The existing non-helpful message is avoided when the driver has presented
a callback.
Link: https://lore.kernel.org/r/1617026056-50483-3-git-send-email-dennis.dalessandro@cornelisnetworks.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Current code uses many different types when dealing with a port of a RDMA
device: u8, unsigned int and u32. Switch to u32 to clean up the logic.
This allows us to make (at least) the core view consistent and use the
same type. Unfortunately not all places can be converted. Many uverbs
functions expect port to be u8 so keep those places in order not to break
UAPIs. HW/Spec defined values must also not be changed.
With the switch to u32 we now can support devices with more than 255
ports. U32_MAX is reserved to make control logic a bit easier to deal
with. As a device with U32_MAX ports probably isn't going to happen any
time soon this seems like a non issue.
When a device with more than 255 ports is created uverbs will report the
RDMA device as having 255 ports as this is the max currently supported.
The verbs interface is not changed yet because the IBTA spec limits the
port size in too many places to be u8 and all applications that relies in
verbs won't be able to cope with this change. At this stage, we are
extending the interfaces that are using vendor channel solely
Once the limitation is lifted mlx5 in switchdev mode will be able to have
thousands of SFs created by the device. As the only instance of an RDMA
device that reports more than 255 ports will be a representor device and
it exposes itself as a RAW Ethernet only device CM/MAD/IPoIB and other
ULPs aren't effected by this change and their sysfs/interfaces that are
exposes to userspace can remain unchanged.
While here cleanup some alignment issues and remove unneeded sanity
checks (mainly in rdmavt),
Link: https://lore.kernel.org/r/20210301070420.439400-1-leon@kernel.org
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently mlx5 driver caches port GID table length for 2 ports. It is
also cached by IB core as port immutable data.
When mlx5 representor ports are present, which are usually more than 2,
invalid access to port_caps array can happen while validating the GID
table length which is only for 2 ports.
To avoid this, take help of the IB cores port immutable data by exposing
an API to read the port immutable fields.
Remove mlx5 driver's internal cache, thereby reduce code and data.
Link: https://lore.kernel.org/r/20210203130133.4057329-5-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Dma-buf based memory region requires one extra parameter and is processed
quite differently. Adding a separate method allows clean separation from
regular memory regions.
Link: https://lore.kernel.org/r/1608067636-98073-3-git-send-email-jianxin.xiong@intel.com
Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Acked-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Acked-by: Christian Koenig <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
A smaller set of patches, nothing stands out as being particularly major
this cycle:
- Driver bug fixes and updates: bnxt_re, cxgb4, rxe, hns, i40iw, cxgb4,
mlx4 and mlx5
- Bug fixes and polishing for the new rts ULP
- Cleanup of uverbs checking for allowed driver operations
- Use sysfs_emit all over the place
- Lots of bug fixes and clarity improvements for hns
- hip09 support for hns
- NDR and 50/100Gb signaling rates
- Remove dma_virt_ops and go back to using the IB DMA wrappers
- mlx5 optimizations for contiguous DMA regions
-----BEGIN PGP SIGNATURE-----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=9t8b
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"A smaller set of patches, nothing stands out as being particularly
major this cycle. The biggest item would be the new HIP09 HW support
from HNS, otherwise it was pretty quiet for new work here:
- Driver bug fixes and updates: bnxt_re, cxgb4, rxe, hns, i40iw,
cxgb4, mlx4 and mlx5
- Bug fixes and polishing for the new rts ULP
- Cleanup of uverbs checking for allowed driver operations
- Use sysfs_emit all over the place
- Lots of bug fixes and clarity improvements for hns
- hip09 support for hns
- NDR and 50/100Gb signaling rates
- Remove dma_virt_ops and go back to using the IB DMA wrappers
- mlx5 optimizations for contiguous DMA regions"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (147 commits)
RDMA/cma: Don't overwrite sgid_attr after device is released
RDMA/mlx5: Fix MR cache memory leak
RDMA/rxe: Use acquire/release for memory ordering
RDMA/hns: Simplify AEQE process for different types of queue
RDMA/hns: Fix inaccurate prints
RDMA/hns: Fix incorrect symbol types
RDMA/hns: Clear redundant variable initialization
RDMA/hns: Fix coding style issues
RDMA/hns: Remove unnecessary access right set during INIT2INIT
RDMA/hns: WARN_ON if get a reserved sl from users
RDMA/hns: Avoid filling sl in high 3 bits of vlan_id
RDMA/hns: Do shift on traffic class when using RoCEv2
RDMA/hns: Normalization the judgment of some features
RDMA/hns: Limit the length of data copied between kernel and userspace
RDMA/mlx4: Remove bogus dev_base_lock usage
RDMA/uverbs: Fix incorrect variable type
RDMA/core: Do not indicate device ready when device enablement fails
RDMA/core: Clean up cq pool mechanism
RDMA/core: Update kernel documentation for ib_create_named_qp()
MAINTAINERS: SOFT-ROCE: Change Zhu Yanjun's email address
...
mlx5 has an ugly flow where it tries to allocate a new MR and replace the
existing MR in the same memory during rereg. This is very complicated and
buggy. Instead of trying to replace in-place inside the driver, provide
support from uverbs to change the entire HW object assigned to a handle
during rereg_mr.
Since destroying a MR is allowed to fail (ie if a MW is pointing at it)
and can't be detected in advance, the algorithm creates a completely new
uobject to hold the new MR and swaps the IDR entries of the two objects.
The old MR in the temporary IDR entry is destroyed, and if it fails
rereg_mr succeeds and destruction is deferred to FD release. This
complexity is why this cannot live in a driver safely.
Link: https://lore.kernel.org/r/20201130075839.278575-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
No reason only one caller checks this. This properly blocks ODP
from the rereg flow if the device does not support ODP.
Link: https://lore.kernel.org/r/20201130075839.278575-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The latest changes in restrack name handling allowed to simplify the QP
creation code to support all types of QPs.
For example XRC QP are presented with rdmatool.
$ ibv_xsrq_pingpong &
$ rdma res show qp
link ibp0s9/1 lqpn 0 type SMI state RTS sq-psn 0 comm [ib_core]
link ibp0s9/1 lqpn 1 type GSI state RTS sq-psn 0 comm [ib_core]
link ibp0s9/1 lqpn 7 type UD state RTS sq-psn 0 comm [mlx5_ib]
link ibp0s9/1 lqpn 42 type XRC_TGT state INIT sq-psn 0 path-mig-state MIGRATED comm [ib_uverbs]
link ibp0s9/1 lqpn 43 type XRC_INI state INIT sq-psn 0 path-mig-state MIGRATED pdn 197 pid 419 comm ibv_xsrq_pingpong
Link: https://lore.kernel.org/r/20201117070148.1974114-4-leon@kernel.org
Reviewed-by: Mark Zhang <markz@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
linux/netdevice.h is included in very many places, touching any
of its dependecies causes large incremental builds.
Drop the linux/ethtool.h include, linux/netdevice.h just needs
a forward declaration of struct ethtool_ops.
Fix all the places which made use of this implicit include.
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Link: https://lore.kernel.org/r/20201120225052.1427503-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the ib_dma_* helpers to skip the DMA translation instead. This
removes the last user if dma_virt_ops and keeps the weird layering
violation inside the RDMA core instead of burderning the DMA mapping
subsystems with it. This also means the software RDMA drivers now don't
have to mess with DMA parameters that are not relevant to them at all, and
that in the future we can use PCI P2P transfers even for software RDMA, as
there is no first fake layer of DMA mapping that the P2P DMA support.
Link: https://lore.kernel.org/r/20201106181941.1878556-8-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Remove the ib_is_destroyable_retryable() concept.
The idea here was to allow the drivers to forcibly clean the HW object
even if they otherwise didn't want to (eg because of usecnt). This was an
attempt to clean up in a world where drivers were not allowed to fail HW
object destruction.
Now that we are going back to allowing HW objects to fail destroy this
doesn't make sense. Instead if a uobject's HW object can't be destroyed it
is left on the uobject list and it is up to uverbs_destroy_ufile_hw() to
clean it. Multiple passes over the uobject list allow hidden dependencies
to be resolved. If that fails the HW driver is broken, throw a WARN_ON and
leak the HW object memory.
All the other tricky failure paths (eg on creation error unwind) have
already been updated to this new model.
Link: https://lore.kernel.org/r/20201104144556.3809085-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Drivers that need a uverbs AH should instead set the create_user_ah() op
similar to reg_user_mr(). MODIFY_AH and QUERY_AH cmds were never
implemented so are just deleted.
Link: https://lore.kernel.org/r/11-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
No driver sets it, and the core code sets a maximum mask, simply remove
it.
Disabled operations are now handled either by having a NULL ops pointer,
or by having the common driver callbacks check for unsupported extended
attributes.
Link: https://lore.kernel.org/r/9-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Each driver should check that it can support the provided attr_mask during
modify_qp. IB_USER_VERBS_EX_CMD_MODIFY_QP was being used to block
modify_qp_ex because the driver didn't check RATE_LIMIT.
Link: https://lore.kernel.org/r/6-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The code in setup_dma_device has become rather convoluted, move all of
this to the drivers. Drives now pass in a DMA capable struct device which
will be used to setup DMA, or drivers must fully configure the ibdev for
DMA and pass in NULL.
Other than setting the masks in rvt all drivers were doing this already
anyhow.
mthca, mlx4 and mlx5 were already setting up maximum DMA segment size for
DMA based on their hardweare limits in:
__mthca_init_one()
dma_set_max_seg_size (1G)
__mlx4_init_one()
dma_set_max_seg_size (1G)
mlx5_pci_init()
set_dma_caps()
dma_set_max_seg_size (2G)
Other non software drivers (except usnic) were extended to UINT_MAX [1, 2]
instead of 2G as was before.
[1] https://lore.kernel.org/linux-rdma/20200924114940.GE9475@nvidia.com/
[2] https://lore.kernel.org/linux-rdma/20200924114940.GE9475@nvidia.com/
Link: https://lore.kernel.org/r/20201008082752.275846-1-leon@kernel.org
Link: https://lore.kernel.org/r/6b2ed339933d066622d5715903870676d8cc523a.1602590106.git.mchehab+huawei@kernel.org
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Expose the query GID table and entry API to user space by adding two new
methods and method handlers to the device object.
This API provides a faster way to query a GID table using single call and
will be used in libibverbs to improve current approach that requires
multiple calls to open, close and read multiple sysfs files for a single
GID table entry.
Link: https://lore.kernel.org/r/20200923165015.2491894-5-leon@kernel.org
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Separate IB_GID_TYPE_IB and IB_GID_TYPE_ROCE to two different values, so
enum ib_gid_type will match the gid types of the new query GID table API
which will be introduced in the following patches.
This change in enum ib_gid_type requires to change also enum
rdma_network_type by separating RDMA_NETWORK_IB and RDMA_NETWORK_ROCE_V1
values.
Link: https://lore.kernel.org/r/20200923165015.2491894-3-leon@kernel.org
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Nothing reads this any more, and the reason for its existence has passed
due to the deferred fput() scheme.
Fixes: 8ea1f989aa ("drivers/IB,usnic: reduce scope of mmap_sem")
Link: https://lore.kernel.org/r/0-v1-df64ff042436+42-uctx_closing_jgg@nvidia.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Leon Romanovsky says:
====================
IBTA declares speed as 16 bits, but kernel stores it in u8. This series
fixes in-kernel declaration while keeping external interface intact.
====================
Based on the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
due to dependencies.
* branch 'mlx5_active_speed':
RDMA: Fix link active_speed size
RDMA/mlx5: Delete duplicated mlx5_ptys_width enum
net/mlx5: Refactor query port speed functions
According to the IB spec active_speed size should be u16 and not u8 as
before. Changing it to allow further extensions in offered speeds.
Link: https://lore.kernel.org/r/20200917090223.1018224-4-leon@kernel.org
Signed-off-by: Aharon Landau <aharonl@mellanox.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Move allocation and destruction of memory windows under ib_core
responsibility and clean drivers to ensure that no updates to MW
ib_core structures are done in driver layer.
Link: https://lore.kernel.org/r/20200902081623.746359-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add work completion opcodes to a new ib_uverbs_wc_opcode enum in
ib_user_verbs.h. This plays the same role as ib_uverbs_wr_opcode
documenting the opcodes in the user space API.
Assigned the IB_WC_XXX opcodes in ib_verbs.h to the IB_UVERBS_WC_XXX
where they are defined. This follows the same pattern as the IB_WR_XXX
opcodes. This fixes an incorrect value for LSO that had crept in but
is not currently being used.
Added a missing IB_WR_BIND_MW opcode in ib_verbs.h.
Link: https://lore.kernel.org/r/20200903224039.437391-2-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Zhu Yanjun