arch_cpu_idle() is a very simple idle interface and exposes only a
single idle state and is expected to not require RCU and not do any
tracing/instrumentation.
As such, omap2_pm_idle() is not a valid implementation. Replace it
with a simple (shallow) omap2_do_wfi() call.
Omap2 doesn't have a cpuidle driver; but adding one would be the
recourse to (re)gain the other idle states.
Suggested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195541.721697850@infradead.org
OMAP4 uses full SoC suspend modes as idle states, as such it needs the
whole power-domain and clock-domain code from the idle path.
All that code is not suitable to run with RCU disabled, as such push
RCU-idle deeper still.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lkml.kernel.org/r/Yqcv6crSNKuSWoTu@atomide.com
Link: https://lore.kernel.org/r/20230112195541.660272394@infradead.org
OMAP3 uses full SoC suspend modes as idle states, as such it needs the
whole power-domain and clock-domain code from the idle path.
All that code is not suitable to run with RCU disabled, as such push
RCU-idle deeper still.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195541.599561742@infradead.org
arch_cpu_idle() is a very simple idle interface and exposes only a
single idle state and is expected to not require RCU and not do any
tracing/instrumentation.
As such, omap_sram_idle() is not a valid implementation. Replace it
with the simple (shallow) omap3_do_wfi() call. Leaving the more
complicated idle states for the cpuidle driver.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195541.538053457@infradead.org
Robot reported that trace_hardirqs_{on,off}() tickle the forbidden
_rcuidle() tracepoint through local_irq_{en,dis}able().
For 'sane' configs, these calls will only happen with RCU enabled and
as such can use the regular tracepoint. This also means it's possible
to trace them from NMI context again.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230112195541.477416709@infradead.org
ARCH_WANTS_NO_INSTR (a superset of CONFIG_GENERIC_ENTRY) disallows any
and all tracing when RCU isn't enabled.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195541.416110581@infradead.org
Per commit 56e62a7370 ("s390: convert to generic entry") the last
and only callers of trace_hardirqs_{on,off}_caller() went away, clean
up.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230112195541.355283994@infradead.org
objtool found that the mds_idle_clear_cpu_buffers() method got
uninlined by the compiler where it called out into instrumentation:
vmlinux.o: warning: objtool: mwait_idle+0x47: call to mds_idle_clear_cpu_buffers() leaves .noinstr.text section
vmlinux.o: warning: objtool: acpi_processor_ffh_cstate_enter+0xa2: call to mds_idle_clear_cpu_buffers() leaves .noinstr.text section
vmlinux.o: warning: objtool: intel_idle+0x91: call to mds_idle_clear_cpu_buffers() leaves .noinstr.text section
vmlinux.o: warning: objtool: intel_idle_s2idle+0x8c: call to mds_idle_clear_cpu_buffers() leaves .noinstr.text section
vmlinux.o: warning: objtool: intel_idle_irq+0xaa: call to mds_idle_clear_cpu_buffers() leaves .noinstr.text section
Solve this by marking mds_idle_clear_cpu_buffers() as __always_inline.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195541.233779815@infradead.org
objtool found a few cases where this code called out into instrumented
code:
vmlinux.o: warning: objtool: acpi_idle_enter_s2idle+0xde: call to wbinvd() leaves .noinstr.text section
vmlinux.o: warning: objtool: default_idle+0x4: call to arch_safe_halt() leaves .noinstr.text section
vmlinux.o: warning: objtool: xen_safe_halt+0xa: call to HYPERVISOR_sched_op.constprop.0() leaves .noinstr.text section
Solve this by:
- marking arch_safe_halt(), wbinvd(), native_wbinvd() and
HYPERVISOR_sched_op() as __always_inline().
- Explicitly uninlining xen_safe_halt() and pv_native_wbinvd() [they were
already uninlined by the compiler on use as function pointers] and
annotating them as 'noinstr'.
- Annotating pv_native_safe_halt() as 'noinstr'.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195541.171918174@infradead.org
objtool found a few cases where this code called out into instrumented
code:
vmlinux.o: warning: objtool: __halt+0x2c: call to hcall_func.constprop.0() leaves .noinstr.text section
vmlinux.o: warning: objtool: __halt+0x3f: call to __tdx_hypercall() leaves .noinstr.text section
vmlinux.o: warning: objtool: __tdx_hypercall+0x66: call to __tdx_hypercall_failed() leaves .noinstr.text section
Fix it by:
- moving TDX tdcall assembly methods into .noinstr.text (they are already noistr-clean)
- marking __tdx_hypercall_failed() as 'noinstr'
- annotating hcall_func() as __always_inline
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195541.111485720@infradead.org
objtool found a few cases where this code called out into instrumented
code:
vmlinux.o: warning: objtool: intel_idle_s2idle+0x6e: call to __monitor.constprop.0() leaves .noinstr.text section
vmlinux.o: warning: objtool: intel_idle_irq+0x8c: call to __monitor.constprop.0() leaves .noinstr.text section
vmlinux.o: warning: objtool: intel_idle+0x73: call to __monitor.constprop.0() leaves .noinstr.text section
vmlinux.o: warning: objtool: mwait_idle+0x88: call to clflush() leaves .noinstr.text section
Fix it by marking the affected methods as __always_inline.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195541.050542952@infradead.org
No callers left that have already disabled RCU.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.927904612@infradead.org
The problem, per commit fc98c3c8c9 ("printk: use rcuidle console
tracepoint"), was printk usage from the cpuidle path where RCU was
already disabled.
Per the patches earlier in this series, this is no longer the case.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Petr Mladek <pmladek@suse.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.865735001@infradead.org
Ever since commit d3afc7f129 ("arm64: Allow IPIs to be handled as
normal interrupts") this function is called in regular IRQ context.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.804410487@infradead.org
None of these functions should ever be ran with RCU disabled anymore.
Specifically, do_handle_IPI() is only called from handle_IPI() which
explicitly does irq_enter()/irq_exit() which ensures RCU is watching.
The problem with smp_cross_call() was, per commit description:
7c64cc0531 ("arm: Use _rcuidle for smp_cross_call() tracepoints")
... that cpuidle_enter_state_coupled() already had RCU disabled, but that's
long been fixed by commit:
1098582a0f ("sched,idle,rcu: Push rcu_idle deeper into the idle path")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.743432118@infradead.org
Now that arch_cpu_idle() is expected to return with IRQs disabled,
avoid the useless STI/CLI dance.
Per the specs this is supposed to work, but nobody has yet relied up
this behaviour so broken implementations are possible.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.682137572@infradead.org
Current arch_cpu_idle() is called with IRQs disabled, but will return
with IRQs enabled.
However, the very first thing the generic code does after calling
arch_cpu_idle() is raw_local_irq_disable(). This means that
architectures that can idle with IRQs disabled end up doing a
pointless 'enable-disable' dance.
Therefore, push this IRQ disabling into the idle function, meaning
that those architectures can avoid the pointless IRQ state flipping.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Acked-by: Mark Rutland <mark.rutland@arm.com> [arm64]
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Guo Ren <guoren@kernel.org>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.618076436@infradead.org
So objtool found this bug:
vmlinux.o: warning: objtool: intel_idle_irq+0x10c: call to trace_hardirqs_off() leaves .noinstr.text section
As per commit 32d4fd5751 ("cpuidle,intel_idle: Fix CPUIDLE_FLAG_IRQ_ENABLE"):
"must not have tracing in idle functions"
Clearly people can't read and tinker along until splat dissapears.
This straight up reverts commit d295ad34f2 ("intel_idle: Fix false
positive RCU splats due to incorrect hardirqs state").
It doesn't re-introduce the problem because preceding patches fixed it
properly.
Fixes: d295ad34f2 ("intel_idle: Fix false positive RCU splats due to incorrect hardirqs state")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.434302128@infradead.org
Idle code is very like entry code in that RCU isn't available. As
such, add a little validation.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.373461409@infradead.org
The __cpuidle functions will become a noinstr class, as such they need
explicit annotations.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.312601331@infradead.org
All the idle routines are called with RCU disabled, as such there must
not be any tracing inside.
While there; clean-up the io-port idle thing.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.251666856@infradead.org
All callers should still have RCU enabled.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.190860672@infradead.org
The whole disable-RCU, enable-IRQS dance is very intricate since
changing IRQ state is traced, which depends on RCU.
Add two helpers for the cpuidle case that mirror the entry code:
ct_cpuidle_enter()
ct_cpuidle_exit()
And fix all the cases where the enter/exit dance was buggy.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.130014793@infradead.org
Doing RCU-idle outside the driver, only to then temporarily enable it
again before going idle is suboptimal.
Notably: this converts all dt_init_idle_driver() and
__CPU_PM_CPU_IDLE_ENTER() users for they are inextrably intertwined.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.068981667@infradead.org
Doing RCU-idle outside the driver, only to then temporarily enable it
again, some *four* times, before going idle is suboptimal.
Notably three times explicitly using RCU_NONIDLE() and once implicitly
through cpu_pm_*().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230112195540.007918454@infradead.org
Doing RCU-idle outside the driver, only to then temporarily enable it
again before going idle is suboptimal.
Notably the cpu_pm_*() calls implicitly re-enable RCU for a bit.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230112195539.946630819@infradead.org
Doing RCU-idle outside the driver, only to then teporarily enable it
again before going idle is suboptimal.
Notably the cpu_pm_*() calls implicitly re-enable RCU for a bit.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230112195539.883561913@infradead.org
Doing RCU-idle outside the driver, only to then temporarily enable it
again, at least twice, before going idle is suboptimal.
Notably both cpu_pm_enter() and cpu_cluster_pm_enter() implicity
re-enable RCU.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230112195539.821714572@infradead.org
Doing RCU-idle outside the driver, only to then temporarily enable it
again, at least twice, before going idle is suboptimal.
Notably once implicitly through the cpu_pm_*() calls and once
explicitly doing ct_irq_*_irqon().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Kajetan Puchalski <kajetan.puchalski@arm.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Guo Ren <guoren@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230112195539.760296658@infradead.org
Doing RCU-idle outside the driver, only to then temporarily enable it
again, at least twice, before going idle is suboptimal.
Notably once implicitly through the cpu_pm_*() calls and once
explicitly doing RCU_NONIDLE().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230112195539.699546331@infradead.org
Doing RCU-idle outside the driver, only to then temporarily enable it
again, at least twice, before going idle is suboptimal.
That is, once implicitly through the cpu_pm_*() calls and once
explicitly doing ct_irq_*_irqon().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230112195539.637185846@infradead.org
Make cpuidle_enter_state() consistent with the s2idle variant and
verify ->enter() always returns with interrupts disabled.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195539.576412812@infradead.org
Make cpuidle_state::enter() methods IRQ state invariant on exit.
Additionally make sure to use raw_local_irq_*() methods since this
cpuidle callback will be called with RCU already disabled.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195539.515253662@infradead.org
Typical boot time setup; no need to suffer an indirect call for that.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230112195539.453613251@infradead.org
The perf_lopwr_cb() function is called from the idle routines; there
is no RCU there, we must not enter tracing.
Use __always_inline, noidle annotations and existing no-trace methods.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195539.392862891@infradead.org
Two new auxiliary vector entries are introduced for rseq without
matching increment of the AT_VECTOR_SIZE_BASE, which causes failures
with CONFIG_HARDENED_USERCOPY=y.
Fixes: 317c8194e6 ("rseq: Introduce feature size and alignment ELF auxiliary vector entries")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230104192054.34046-1-mathieu.desnoyers@efficios.com
The mm_numa_cid related rseq patches from the series were not picked up
into the tip tree, so enabling the mm_numa_cid test needs to be
reverted.
This reverts commit b344b8f2d8.
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/oe-lkp/202301040903.2dd1e25b-oliver.sang@intel.com
The following commit:
c89970202a ("cputime: remove cputime_to_nsecs fallback")
Removed an <asm/cputime.h> inclusion from <linux/sched/cputime.h>, but this
broke the IA64 build:
arch/ia64/kernel/time.c:110:6: warning: no previous prototype for 'arch_vtime_task_switch' [-Wmissing-prototypes]
Add in the missing <asm/cputime.h> header to fix it.
Fixes: c89970202a ("cputime: remove cputime_to_nsecs fallback")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Keep track of previously issued registrations and compare the result
with MEMBARRIER_CMD_GET_REGISTRATIONS return value.
Signed-off-by: Michal Clapinski <mclapinski@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20221207164338.1535591-3-mclapinski@google.com
Provide a method to query previously issued registrations.
Signed-off-by: Michal Clapinski <mclapinski@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20221207164338.1535591-2-mclapinski@google.com
The max CPU capacity is the same for all CPUs sharing frequency domain.
There is a way to avoid heavy operations in a loop for each CPU by
leveraging this knowledge. Thus, simplify the looping code in the
sugov_next_freq_shared() and drop heavy multiplications. Instead, use
simple max() to get the highest utilization from these CPUs.
This is useful for platforms with many (4 or 6) little CPUs. We avoid
heavy 2*PD_CPU_NUM multiplications in that loop, which is called billions
of times, since it's not limited by the schedutil time delta filter in
sugov_should_update_freq(). When there was no need to change frequency
the code bailed out, not updating the sg_policy::last_freq_update_time.
Then every visit after delta_ns time longer than the
sg_policy::freq_update_delay_ns goes through and triggers the next
frequency calculation code. Although, if the next frequency, as outcome
of that, would be the same as current frequency, we won't update the
sg_policy::last_freq_update_time and the story will be repeated (in
a very short period, sometimes a few microseconds).
The max CPU capacity must be fetched every time we are called, due to
difficulties during the policy setup, where we are not able to get the
normalized CPU capacity at the right time.
The fetched CPU capacity value is than used in sugov_iowait_apply() to
calculate the right boost. This required a few changes in the local
functions and arguments. The capacity value should hopefully be fetched
once when needed and then passed over CPU registers to those functions.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20221208160256.859-2-lukasz.luba@arm.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Patrick Bellasi <patrick.bellasi@arm.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
ttwu_do_activate() is used for a complete wakeup, in which we will
activate_task() and use ttwu_do_wakeup() to mark the task runnable
and perform wakeup-preemption, also call class->task_woken() callback
and update the rq->idle_stamp.
Since ttwu_runnable() is not a complete wakeup, don't need all those
done in ttwu_do_wakeup(), so we can move those to ttwu_do_activate()
to simplify ttwu_do_wakeup(), making it only mark the task runnable
to be reused in ttwu_runnable() and try_to_wake_up().
This patch should not have any functional changes.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20221223103257.4962-2-zhouchengming@bytedance.com
ttwu_runnable() is used as a fast wakeup path when the wakee task
is running on CPU or runnable on RQ, in both cases we can just
set its state to TASK_RUNNING to prevent a sleep.
If the wakee task is on_cpu running, we don't need to update_rq_clock()
or check_preempt_curr().
But if the wakee task is on_rq && !on_cpu (e.g. an IRQ hit before
the task got to schedule() and the task been preempted), we should
check_preempt_curr() to see if it can preempt the current running.
This also removes the class->task_woken() callback from ttwu_runnable(),
which wasn't required per the RT/DL implementations: any required push
operation would have been queued during class->set_next_task() when p
got preempted.
ttwu_runnable() also loses the update to rq->idle_stamp, as by definition
the rq cannot be idle in this scenario.
Suggested-by: Valentin Schneider <vschneid@redhat.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20221223103257.4962-1-zhouchengming@bytedance.com
Add a document explaining the util clamp feature: what it is and
how to use it. The new document hopefully covers everything one needs to
know about uclamp.
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20221216235716.201923-1-qyousef@layalina.io
Cc: Jonathan Corbet <corbet@lwn.net>
sched_mm_cid_after_execve() does not expect NULL t->mm, but it may happen
if a usermodehelper kthread fails when attempting to execute a binary.
sched_mm_cid_fork() can be issued from a usermodehelper kthread, which
has t->flags PF_KTHREAD set.
Fixes: af7f588d8f ("sched: Introduce per-memory-map concurrency ID")
Reported-by: kernel test robot <yujie.liu@intel.com>
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/oe-lkp/202212301353.5c959d72-yujie.liu@intel.com
Peter Zijlstra