Commit Graph

855 Commits

Author SHA1 Message Date
Loc Ho 67778e0eda power: Add APM X-Gene system reboot driver
Add APM X-Gene SoC system reboot driver. This driver handles only system
reboot. System shutdown is board specific and can be handled by board
driver or GPIO based shutdown driver.

Signed-off-by: Loc Ho <lho@apm.com>
Signed-off-by: Feng Kan <fkan@apm.com>
Signed-off-by: Kumar Sankaran <ksankaran@apm.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-08-09 14:28:17 -07:00
Andrea Adami 0e81ef5880 power_supply: tosa_battery: Get rid of irq_to_gpio usage
This commit fixes the following error:

 linux/drivers/power/tosa_battery.c:153:2: error: implicit declaration of
 function 'irq_to_gpio' [-Werror=implicit-function-declaration]

Since 9d08d5d77a, irq_to_gpio() is no longer
available but still in use by collie_battery.c. As it's just for a debug
message, just get rid of this call.

Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-08-09 13:41:52 -07:00
Andrea Adami 1ba6411497 power supply: collie_battery: Convert to use dev_pm_ops
This commit fixes the following warnings:

 linux/drivers/power/collie_battery.c:372:2: warning: initialization from
 incompatible pointer type [enabled by default]
 linux/drivers/power/collie_battery.c:372:2: warning: (near initialization
 for 'collie_bat_driver.suspend') [enabled by default]

Referencess:

MFD: ucb1x00-core: convert to use dev_pm_ops
https://git.kernel.org/cgit/linux/kernel/git/stable/linux-stable.git/commit/include/linux/mfd?id=5a09b7120a965a7d7e8494d0ed509135bbce0118

MFD: mcp-core: remove legacy driver suspend/resume methods
https://git.kernel.org/cgit/linux/kernel/git/stable/linux-stable.git/commit/include/linux/mfd?id=cf4abfcc0df2985ff6061f74e63b8353f2a1d0bc

Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-08-09 13:41:06 -07:00
Paul Gortmaker e2e077cdde power_supply: Make goldfish_battery depend on GOLDFISH || COMPILE_TEST
Nearly all the other goldfish peripherals (mtd, keyboard, etc) have a
dependency on the main platform's GOLDFISH Kconfig item, but this one got
skipped.  Even with consistency as a justification, there was initial
resistance[1] from some people to adding it however, as they wanted the
extra compile coverage.

Now, with CONFIG_COMPILE_TEST, we have the middle ground that will give
people the coverage who want it, and let those who don't want it to skip
ever seeing the option presented.

[1] https://lkml.org/lkml/2013/2/27/333

Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-08-09 13:28:47 -07:00
Abhimanyu Kapur 78be3176c4 power: reset: Add msm restart support
Add support for restart and poweroff functionality present on MSM chipsets
with the MPM2 ps-hold hardware.

Signed-off-by: Abhimanyu Kapur <abhimany@codeaurora.org>
Tested-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-08-09 11:47:53 -07:00
Linus Torvalds 7d3107d26b Nothing exciting this time, just assorted fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQIcBAABAgAGBQJR22dXAAoJEGgI9fZJve1b56QP/Aq4UhbWz5V0Apnl1RgELAU6
 3l74FCp2GG6ykwU95HBCt7OeXQurWkDPvdQUalGoSsQZGndP/thcAB0n0PPgLoP0
 E5ZGkKYg8QaiVUx8Bb/egtU79QBU54qUmA2TxQqFdf9U6VwF80OmLU8TKqSbX53X
 GYstF7XeRrxBqlVZ0ctziXFB4+RtJTSUP4RfKFe35a+J/0lghxGv8niJVnbUxAZt
 ReUfM/6kJhjuAf1sQPsPZQNwMiFJzarlrQ+xIgzARkmrU1LtQ1yBAG8vVQ4+ozOv
 zZDsvWKbeUWavNvMY4at9XBkJvpMutuzYnYH6xaoGA8pLEnsZ6ckIwNFMuqh1NOF
 BUh0aAGi+DfaUk2POd8pGuR6z7oYUKGDSO5maPurOqQDMZ0VRgNXiIt79tWQrG7g
 TmtNLxkWGNFHCvAIRGLD3SQt0AgpyGatov59ukllqMxDF+z0an3Tf7WNS6C4nf7C
 mU22yX67lhDKyEVIcGwLM9w6wgG1Xtv6HX50uYcroyiMcRGD1bxGyUsYxl+sqlh1
 +GAoL8b+8vhpl2FMmGO6TMhlL0fW8orLI3pnqxgvKDlq41hq9Ok23h0H29ZOBckx
 2egEGQHpOllrgMfvrju9BWh3TzFpmlp0hi5evkawMHMcZKAkhMc20GDNujKYlNOb
 j3yzXbnZHOq9y9/QcE+r
 =K+7Q
 -----END PGP SIGNATURE-----

Merge tag 'for-v3.11' of git://git.infradead.org/battery-2.6

Pull battery subsystem update from Anton Vorontsov:
 "Nothing exciting this time, just assorted fixes and cleanups"

* tag 'for-v3.11' of git://git.infradead.org/battery-2.6: (25 commits)
  charger-manager: Fix regulator_get() return check
  charger-manager: Fix a bug when it unregisters notifier block of extcon
  tps65090-charger: Add dt node to power_supply
  sbs-battery: Add dt to power_supply struct
  power_supply: Add of_node_put to fix refcount
  power_supply: Move of_node out of the #ifdef CONFIG_OF
  power/reset: Make the vexpress driver optional on arm and arm64
  charger-manager: Add missing newlines, fix a couple of typos, add pr_fmt
  tps65090-charger: Fix AC detect
  MAINTAINERS: Update email address for Anton Vorontsov
  charger-manager: Ensure event is not used as format string
  power_supply: Replace strict_strtoul() with kstrtoul()
  generic-adc-battery: Fix checking if none of the channels are supported
  power: Use platform_{get,set}_drvdata()
  pm2301_charger: Return error if create_singlethread_workqueue fails
  pm2301_charger: Fix NULL pointer dereference
  lp8727_charger: Support the device tree feature
  twl4030_charger: Remove unnecessary platform_set_drvdata()
  rx51_battery: Remove unnecessary platform_set_drvdata()
  jz4740-battery: Remove unnecessary platform_set_drvdata()
  ...
2013-07-10 11:13:00 -07:00
Robin Holt 7b6d864b48 reboot: arm: change reboot_mode to use enum reboot_mode
Preparing to move the parsing of reboot= to generic kernel code forces
the change in reboot_mode handling to use the enum.

[akpm@linux-foundation.org: fix arch/arm/mach-socfpga/socfpga.c]
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Russ Anderson <rja@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:29 -07:00
Jonghwa Lee 5a6c220845 charger-manager: Fix regulator_get() return check
This patch fixes return value checking of regulator_get() in
charger-manager driver. The API, regulator_get(), returns ERR_PTR() when
it fails to get regulator with given name, not NULL.

Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-06-28 18:37:03 -07:00
Jonghwa Lee 3cc9d26966 charger-manager: Fix a bug when it unregisters notifier block of extcon
This patch prevents NULL pointer error cauesed by unregistering
unregistered exton notifier block. At the probing time of charger manager,
it tries to remove extcon notifier block when it fails to initialize them.
It has to be applied for only registered one. Otherwise, it'd make kernel
panic. To make it work right, it checks extcon_specific_cable_nb's
extcon_dev node. If extcon cable notifier block was registered
successfully, it has proper extcon_dev pointer if not so it has NULL
pointer.

Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-06-28 18:35:49 -07:00
Rhyland Klein 605860bc24 tps65090-charger: Add dt node to power_supply
Passing in the dt node for this charger enables the logic in the core to
lookup this device, to see if it is supplying another power_supply,
through dt.

Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-06-28 18:20:58 -07:00
Rhyland Klein 89a22b1a98 sbs-battery: Add dt to power_supply struct
By passing in the dt node of this device, we enable the logic for linking
power_supplies together from dt. This is specified by adding a
"power-supplies" property with a phandle to the charger for a given
supply.

Enable this logic now for the sbs-battery driver.

Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-06-28 18:20:56 -07:00
Rhyland Klein 2054d6e90e power_supply: Add of_node_put to fix refcount
of_parse_phandle increments the refcount for a dt node before returning
it. Add of_node_put where needed to properly decrement the refcount when
we are done using a given node.

Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-06-28 18:20:54 -07:00
Pawel Moll b52eafcd79 power/reset: Make the vexpress driver optional on arm and arm64
The driver can be used on either arm or arm64 platforms, but
the latter doesn't have any platform-specific configuration
options, so it must be possible to manually enable the driver.

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-06-21 17:33:30 -07:00
Andrii Tseglytskyi efca406b94 PM / AVS: SmartReflex: use devm_* API to initialize SmartReflex
Use of of devm_* API for resource allocation provides benefits such
as auto handling of resource free. This reduces possibility have
memory leaks in case of wrong error handling. All direct release
calls should be removed to avoid races.

Reported-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Andrii Tseglytskyi <andrii.tseglytskyi@ti.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-06-10 10:50:48 -07:00
Andrii Tseglytskyi 299066bb37 PM / AVS: SmartReflex: use omap_sr * for enable/disable interface
SmartReflex driver interface is natively divided to two parts:

- external SmartReflex interface
- interface between SmartReflex driver and SmartReflex Class

Functions which belong to AVS class interface can use
struct omap_sr* instead of struct voltatedomain*, to provide a
direct connection between SR driver and SR class. This allows
us to optimize and not do additional lookups where none is
required.

sr_enable() and sr_disable() are interface functions between
SR driver and SR class. They are typically used by Class driver
to enable/disable SmartReflex hardware module.
Now they take struct omap_sr* as input parameter.

Signed-off-by: Andrii Tseglytskyi <andrii.tseglytskyi@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-06-10 10:46:18 -07:00
Andrii Tseglytskyi 6c80573415 PM / AVS: SmartReflex: use omap_sr * for minmax interfaces
SmartReflex driver interface is natively divided to two parts:

- external SmartReflex interface
- interface between SmartReflex driver and SmartReflex Class

Functions which belong to AVS class interface can use
struct omap_sr* instead of struct voltatedomain*, to provide a
direct connection between SR driver and SR class. This allows
us to optimize and not do additional lookups where none is
required.

sr_configure_minmax() is interface function between SR driver
and SR class. It is typically used by Class driver to
configure MINMAXAVG module inside SmartReflex module.
Now it takes struct omap_sr* as input parameter.

Signed-off-by: Andrii Tseglytskyi <andrii.tseglytskyi@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-06-10 10:46:17 -07:00
Andrii Tseglytskyi 3dfc35ffd9 PM / AVS: SmartReflex: use omap_sr * for errgen interfaces
SmartReflex driver interface is natively divided to two parts:

- external SmartReflex interface
- interface between SmartReflex driver and SmartReflex Class

Functions which belong to AVS class interface can use
struct omap_sr* instead of struct voltatedomain*, to provide a
direct connection between SR driver and SR class. This allows
us to optimize and not do additional lookups where none is
required.

sr_disable_errgen() and sr_configure_errgen() are interface
functions between SR driver and SR class. They are typically
used by Class driver to configure error generator module during
SmartReflex enable/disable sequence.
Now they take struct omap_sr* as input parameter.

Signed-off-by: Andrii Tseglytskyi <andrii.tseglytskyi@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-06-10 10:46:17 -07:00
Andrii Tseglytskyi 33da28246f PM / AVS: SmartReflex: fix driver name
DRIVER_NAME was undefined for SmartReflex. Now it is
defined with valid value "smartreflex". It is needed
to define proper value for:
MODULE_ALIAS("platform:" DRIVER_NAME);

Signed-off-by: Andrii Tseglytskyi <andrii.tseglytskyi@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-06-10 10:35:17 -07:00
Andrii Tseglytskyi bd4a36bec0 PM / AVS: SmartReflex: disable runtime PM on driver remove
Runtime PM should be disabled for device on driver remove,
otherwise runtime PM will be not balanced, and this will cause
an error message, on next driver probe.

Signed-off-by: Andrii Tseglytskyi <andrii.tseglytskyi@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-06-10 10:35:17 -07:00
Nishanth Menon efe4e06de3 PM / AVS: SmartReflex: disable errgen before vpbound disable
vpboundsintr_en is available inside the IP block as an re-sycned
version and one which is not. Due to this, there is an 1 sysclk
cycle window where the SR_SInterruptz signal could be asserted low.
IF, intr_en is cleared on the exact same cycle as the irqclr, an
additional pulse is generated which indicates for VP that
an additional adjustment of voltage is required.

This results in VP doing two voltage adjustments for the SRERR
(based on configuration, upto 4 steps), instead of the needed
1 step.
Due to the unexpected pulse from AVS which breaks the AVS-VP
communication protocol, VP also ends up in a stuck condition by
entering a state where VP module remains non-responsive
to any futher AVS adjustment events. This creates the symptom
called "TRANXDONE Timeout" scenario.

By disabling errgen prior to disable of intr_en, this situation
can be avoided.

Signed-off-by: Vincent Bour <v-bour@ti.com>
Signed-off-by: Leonardo Affortunati <l-affortunati@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-06-10 10:35:17 -07:00
Joe Perches e5409cbd8c charger-manager: Add missing newlines, fix a couple of typos, add pr_fmt
Make sure that dev_<level> calls are newline terminated.
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt to prefix
all pr_<level> calls with "charger-manager: "

Fix a couple of typos.
Fix formats with terminating n that should be \n.
Coalesce formats for easier grep.
Align arguments to open parenthesis for these dev_<level> calls.
Add missing spaces after coalescing multiple string segments.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-06-09 10:07:36 -07:00
Andrew Chew e24142178f tps65090-charger: Fix AC detect
The VACG interrupt was not being enabled.  Thus, interrupts were never
generated when AC status changes.  In addition, interrupts were never
cleared after taking and processing the interrupt.

Added the register offset for the INTR_MASK register, since this is needed
to unmask the VACG interrupt.

Enabled the VACG interrupt in tps65090_config_charger().

Cleared interrupts after processing, in tps65090_charger_isr().

Also removed unused variable "enable" in tps65090_enable_charging(), and
fixed a typo in one of the dev_err() prints.

Signed-off-by: Andrew Chew <achew@nvidia.com>
Tested-by: Rhyland Klein <rklein@nvidia.com>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-06-09 10:07:34 -07:00
Kees Cook 3594f4c0d7 charger-manager: Ensure event is not used as format string
The exposed interface for cm_notify_event() could result in the event msg
string being parsed as a format string. Make sure it is only used as a
literal string.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Cc: Anton Vorontsov <cbou@mail.ru>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-06-06 17:37:28 -07:00
Jingoo Han 4b43eb67ae power_supply: Replace strict_strtoul() with kstrtoul()
The usage of strict_strtoul() is not preferred, because strict_strtoul()
is obsolete. Thus, kstrtoul() should be used.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-06-06 17:35:38 -07:00
Axel Lin d211c6e824 generic-adc-battery: Fix checking if none of the channels are supported
If none of the channels are supported, index is 0. Also ensure to return
error code instead of 0 in goto second_mem_fail path.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: anish kumar <anish198519851985@gmail.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-06-06 17:33:40 -07:00
Jingoo Han e083587924 power: Use platform_{get,set}_drvdata()
Use the wrapper functions for getting and setting the driver data using
platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev,
so we can directly pass a struct platform_device.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-06-06 17:30:46 -07:00
Axel Lin c509a62c94 pm2301_charger: Return error if create_singlethread_workqueue fails
Return error instead of 0 if create_singlethread_workqueue call fails.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-06-06 17:25:48 -07:00
Axel Lin df311333a8 pm2301_charger: Fix NULL pointer dereference
Add checking pl_data in probe, this prevent possible NULL pointer
dereference. Also fix NULL pointer deference in dev_err when allocate
memory for pm2 fails.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-06-06 17:25:27 -07:00
Kim, Milo 17b4565b30 lp8727_charger: Support the device tree feature
The interrupt and charging parameters are configurable in the device tree
structure. In the board test, a GPIO is used for handling LP8727
interrupts. The device tree binding documentation is added also.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-06-06 17:19:54 -07:00
Jingoo Han 0f1e0169e0 twl4030_charger: Remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release or on
probe failure, since commit 0998d06310
(device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is
not needed to manually clear the device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-06-06 17:14:30 -07:00
Jingoo Han f70d739ada rx51_battery: Remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release or on
probe failure, since commit 0998d06310
(device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is
not needed to manually clear the device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-06-06 17:14:13 -07:00
Jingoo Han 8ff3fb2902 jz4740-battery: Remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release or on
probe failure, since commit 0998d06310
(device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is
not needed to manually clear the device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-06-06 17:14:02 -07:00
Jingoo Han 6fe6a40a83 gpio-charger: Remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release or on
probe failure, since commit 0998d06310
(device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is
not needed to manually clear the device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-06-06 17:13:46 -07:00
Jingoo Han 30cf74b941 bq27x00_battery: Remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release or on
probe failure, since commit 0998d06310
(device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is
not needed to manually clear the device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-06-06 17:13:31 -07:00
Jingoo Han ddeeb8f973 ab8500_bm: Remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release or on
probe failure, since commit 0998d06310
(device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is
not needed to manually clear the device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-06-06 17:13:09 -07:00
Jingoo Han 71c29b3a89 88pm860x_charger: Remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release or on
probe failure, since commit 0998d06310
(device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is
not needed to manually clear the device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-06-06 17:12:58 -07:00
Jingoo Han 6c1d7a1c77 88pm860x_battery: Remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release or on
probe failure, since commit 0998d06310
(device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is
not needed to manually clear the device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-06-06 17:12:37 -07:00
Linus Torvalds 72de4c63e5 Last minute one-liners: wrong kfree usage fix, module alias fixup and
kconfig adjustments.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQIcBAABAgAGBQJRjV16AAoJEGgI9fZJve1bQeIP/j7K21xpCfKjvxgzKQjmVN4Z
 PMi3mUzNXpOCVVN+2Vd+ez9WxQAxiMHPEs+DNAFPoqaFbrBn6KwRox5eOo60j5Cm
 v/IKhUC41/OwErGvr0iop0x9ifOpGon6AHhau8JAv1frRS1DpI7oTDBI3huRT/b2
 AhButIZiOxRzrImfc5v3lA6paX8fgu5KmupYgQAvHmkKSN1R+DR5i6eFKtPtHwRZ
 9cHqZmAwSwySI0HyhjNdPU3yaok3zte6GF/XB58eYDNmP25I0hTVFo3CY30JMfXP
 2e3i2zHOGe0g5fX+Wjk6iVWA9tcobrTtZ/0lzSpe07qUK2zW8fv4S3A4pzVqJ1GT
 02N458NZXPOEJ5Bfr/GO+74gHmHOcga5ea1EJh2Y1yr/ut2VQgB6W57xLvD+CWdn
 bVNAc73vN/5Bu5Swuw7Q5B53HV9CzZs+vs6aocraYuuBD3TvSCfyowOiODayKKdC
 gLmrZ9aoyGjNmRxh15WVpZWm/VwYVcBXv1BlqECsY/Sn42w9u5uLPdrrNleAhMlL
 /OqaGp817dpEeY85jLXDOEPhqafjiOO49mY9qN3iN0o3DKAEKF/cA5sxGMDkAija
 Oa63tzRQEiz4XfHwur5Oa3hGasB7OAdWF4p/dzLEYFkY0HUKW35Y+g03dd2f60au
 v2cMQxcUQ3FLJDfirgQP
 =+dqw
 -----END PGP SIGNATURE-----

Merge tag 'for-v3.10-fixes' of git://git.infradead.org/battery-2.6

Pull bettery fixes from Anton Vorontsov:
 "Last minute one-liners: wrong kfree usage fix, module alias fixup and
  kconfig adjustments"

* tag 'for-v3.10-fixes' of git://git.infradead.org/battery-2.6:
  pm2301_charger: Fix module alias prefix
  wm831x_backup: Fix wrong kfree call for devdata->backup.name
  bq27x00: Fix I2C dependency in KConfig
  lp8788-charger: Fix kconfig dependency
2013-05-25 20:32:49 -07:00
Axel Lin dccab6092d pm2301_charger: Fix module alias prefix
This driver is a i2c driver, use "i2c" rather than "platform" prefix for
module alias.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-05-10 11:57:14 -07:00
Axel Lin c909fc8573 wm831x_backup: Fix wrong kfree call for devdata->backup.name
devdata->backup.name points to devdata->name, the memory for devdata->name
is part of struct wm831x_backup. Thus remove kfree call for
devdata->backup.name.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-05-10 11:56:22 -07:00
Xiong Zhou a2d0dbb4b5 bq27x00: Fix I2C dependency in KConfig
This patch fixes build failure(randconfig) of next-20130501. When config
I2C as m, BATTERY_BQ27x00 as y, here comes the failure. The driver depends
on I2C only if I2C is not disabled, as Lars commented. Last version of
this patch make the driver depend on I2C unconditionally.

Failure message:
drivers/built-in.o: In function `bq27x00_read_i2c':
bq27x00_battery.c:(.text+0x1082a7): undefined reference to `i2c_transfer'
drivers/built-in.o: In function `bq27x00_battery_init':
bq27x00_battery.c:(.init.text+0x6085): undefined reference to `i2c_register_driver'
bq27x00_battery.c:(.init.text+0x60c7): undefined reference to `i2c_del_driver'
drivers/built-in.o: In function `bq27x00_battery_exit':
bq27x00_battery.c:(.exit.text+0xbf0): undefined reference to `i2c_del_driver'
make: *** [vmlinux] Error 1

Signed-off-by: Xiong Zhou <jencce.kernel@gmail.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-05-10 11:04:15 -07:00
Linus Torvalds d7ab7302f9 For 3.10 we have a few new MFD drivers for:
- The ChromeOS embedded controller which provides keyboard, battery and power
   management services. This controller is accessible through i2c or SPI.
 
 - Silicon Laboratories 476x controller, providing access to their FM chipset
   and their audio codec.
 
 - Realtek's RTS5249, a memory stick, MMC and SD/SDIO PCI based reader.
 
 - Nokia's Tahvo power button and watchdog device. This device is very similar
   to Retu and is thus supported by the same code base.
 
 - STMicroelectronics STMPE1801, a keyboard and GPIO controller supported by
   the stmpe driver.
 
 - ST-Ericsson AB8540 and AB8505 power management and voltage converter
   controllers through the existing ab8500 code.
 
 Some other drivers got cleaned up or improved. In particular:
 
 - The Linaro/STE guys got the ab8500 driver in sync with their internal code
   through a series of optimizations, fixes and improvements.
 
 - The AS3711 and OMAP USB drivers now have DT support.
 
 - The arizona clock and interrupt handling code got improved.
 
 - The wm5102 register patch and boot mechanism also got improved.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRhttxAAoJEIqAPN1PVmxKl6QP/ilyz2OnuZSJKAT+N3tt0EpR
 6hFk0H6uSiHJ5aNyA22WGJq97R3jW9eGK9uD4AKCQ05l9UF/c5+YeXtmGHtxDLCb
 jBrErfB6GmEn1H2TzVK+Rp1WPAB/yoYHJosgGNCwohvuffhMiogSVHlI09EY4mQh
 2Eo0RTN1UXKXSOZN+E7hb+GbIFzU8eOlEFdc2jh4qtfsvMDANbEByrZM6s0QFB31
 LPn03uBL0+iwE8KW2144LKsfzeOos4JWbumyG9Lh6BugUSy1e/Zvv7aWNVeMvY8C
 0+ZUk0bzRm9g7e3X4iYLPSboZt7J6DLaBlWXnUaOsJb+YRkUGh094ySdKojP3EiK
 8SWSfH4EDwIANKC4zyXMcyny8OewySyrTTd0BTlbgHFyDmvmHk213crsCcilHzRb
 3wrX0ETrk96Dkla4/e7IAyME+AbrglStHVGGf2hexlPm2nZdLsE8lfyo9yqjPqzy
 w49y7mpTA5PVE63szB1tI/58W2snZtXAEdQGjZmDQp29vDZaeR1t3W/IhKNG30JN
 SZGiX3H/6YS4MDZ48N709H83hM4V93XrHKsN59NjQe8NZ7AnSIfns9IgMciGBv7r
 aBE+Uwm9htK270Hvl5q8qDDnKaVGYOFlCq9qaeZ2k8NPyyRlQCRpJYjtSplYAnGr
 iLI0JdM32u3qdf5IT+Cw
 =Wq20
 -----END PGP SIGNATURE-----

Merge tag 'mfd-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next

Pull MFD update from Samuel Ortiz:
 "For 3.10 we have a few new MFD drivers for:

   - The ChromeOS embedded controller which provides keyboard, battery
     and power management services.  This controller is accessible
     through i2c or SPI.

   - Silicon Laboratories 476x controller, providing access to their FM
     chipset and their audio codec.

   - Realtek's RTS5249, a memory stick, MMC and SD/SDIO PCI based
     reader.

   - Nokia's Tahvo power button and watchdog device.  This device is
     very similar to Retu and is thus supported by the same code base.

   - STMicroelectronics STMPE1801, a keyboard and GPIO controller
     supported by the stmpe driver.

   - ST-Ericsson AB8540 and AB8505 power management and voltage
     converter controllers through the existing ab8500 code.

  Some other drivers got cleaned up or improved.  In particular:

   - The Linaro/STE guys got the ab8500 driver in sync with their
     internal code through a series of optimizations, fixes and
     improvements.

   - The AS3711 and OMAP USB drivers now have DT support.

   - The arizona clock and interrupt handling code got improved.

   - The wm5102 register patch and boot mechanism also got improved."

* tag 'mfd-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next: (104 commits)
  mfd: si476x: Don't use 0bNNN
  mfd: vexpress: Handle pending config transactions
  mfd: ab8500: Export ab8500_gpadc_sw_hw_convert properly
  mfd: si476x: Fix i2c warning
  mfd: si476x: Add header files and Kbuild plumbing
  mfd: si476x: Add chip properties handling code
  mfd: si476x: Add the bulk of the core driver
  mfd: si476x: Add commands abstraction layer
  mfd: rtsx: Support RTS5249
  mfd: retu: Add Tahvo support
  mfd: ucb1400: Pass ucb1400-gpio data through ac97 bus
  mfd: wm8994: Add some OF properties
  mfd: wm8994: Add device ID data to WM8994 OF device IDs
  input: Export matrix_keypad_parse_of_params()
  mfd: tps65090: Add compatible string for charger subnode
  mfd: db8500-prcmu: Support platform dependant device selection
  mfd: syscon: Fix warnings when printing resource_size_t
  of: Add stub of_get_parent for non-OF builds
  mfd: omap-usb-tll: Convert to devm_ioremap_resource()
  mfd: omap-usb-host: Convert to devm_ioremap_resource()
  ...
2013-05-05 17:36:20 -07:00
Randy Dunlap 237a1b01fd lp8788-charger: Fix kconfig dependency
Fix build errors in lp8788-charger by making it depend on IIO.
Fixes errors when CONFIG_IIO=m and CHARGER_LP8788=y.

lp8788-charger.c:(.text+0x2146b5): undefined reference to `iio_channel_get'
lp8788-charger.c:(.text+0x2146ce): undefined reference to `iio_channel_get'
lp8788-charger.c:(.text+0x214a86): undefined reference to `iio_read_channel_processed'
lp8788-charger.c:(.text+0x214b51): undefined reference to `iio_read_channel_processed'
lp8788-charger.c:(.text+0x214c30): undefined reference to `iio_read_channel_processed'
lp8788-charger.c:(.text+0x214d93): undefined reference to `iio_channel_release'
lp8788-charger.c:(.text+0x214dac): undefined reference to `iio_channel_release'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Milo Kim <milo.kim@ti.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-05-02 21:17:50 -07:00
Linus Torvalds 151173e8ce Highlights:
- OpenFirmware/DeviceTree support for the Power Supply core: the core now
   automatically populates supplied_from hierarchy from the device tree.
   With these patches chargers and batteries can now lookup each other
   without the board files support shim. Rhyland Klein at NVIDIA did the
   work;
 
 - New ST-Ericsson ABX500 hwmon driver. The driver is heavily using the
   AB85xx core and depends on some recent changes to it, so that is why the
   driver comes through the battery tree. It has an appropriate ack from
   the hwmon maintainer (i.e. Guenter Roeck). Martin Persson at ST-Ericsson
   and Hongbo Zhang at Linaro authored the driver;
 
 - Final bits to sync AB85xx ST-Ericsson changes into mainline. The changes
   touch mfd parts, but these were acked by the appropriate MFD maintainer
   (i.e. Samuel Ortiz). Lee Jones at Linaro did most of the work and lead
   the submission process.
 
 Minor changes, but still worth mentioning:
 
 - Battery temperature reporting fix for Nokia N900 phones;
 - Versatile Express poweroff driver moved into drivers/power/reset/.
 - Tree-wise: use devm_kzalloc() where appropriate;
 - Tree-wise: dev_pm_ops cleanups/fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJRf1BPAAoJEGgI9fZJve1bwyoP/3Gv+qStzbN7mUtIVEvH3EAe
 aVJwlODFzEZjk5xoiw7Dc8PuBE8O948hWOnQyCuUQ8+OfK6SyNIjexPYy3Z25a0F
 cX9JMj7rtPWHvxo2q/YuKwBPZoxj/JIPyxwUT7akwXoHAV059fvcy9R1DfFX2Qur
 hSP0NXTg+guvEpxGV4bC2l+LWZPmDFK9n0RsorttYaBvsiRDWl0c2TY2byofYlBw
 ++m/rI8Qgl8db8pKq/WDue62HtMt3kmZj6ZIgej3Wb0+GIRmYHMyPIyAkf82Wlw2
 g2sGNPT7cstrSNOozegzJ7UghJObcYDFf10NCgvFMNjmAT1dAwdneQHEWy6Ek7pT
 9X3e0LmaFqVbufFp4xFiLkMutsCLLTnGyXIbzs7RkTm3XBVIUqiDWtI6I6X44ohG
 6PJn8vUlufu7owXrqFpgSBar2U1vfoQdhInmz4hbQeff0qn2nX/BGNwhxYptZ549
 TudsI9WGzJ6fvYQ56zh6+BfiA0FmjhUiSKOtrXImrhxE6gUf3IOJyMQlkxLx5t8D
 uuhBmO0J6kDi2lqF6alOEo+UDefJj4mUJn2tnIdis90+lNQlSV02GEtiwFT1zt1z
 LFW0xshQkxZ4lMa28h35FB1/Z11ApUOe4Es+OKADDJhAnxdZzXcAwIRyPRRPgdsy
 jTnJno+Kxk9wXLcekxVE
 =5BdE
 -----END PGP SIGNATURE-----

Merge tag 'for-v3.10' of git://git.infradead.org/battery-2.6

Pull battery updates from Anton Vorontsov:
 "Highlights:

   - OpenFirmware/DeviceTree support for the Power Supply core: the core
     now automatically populates supplied_from hierarchy from the device
     tree.  With these patches chargers and batteries can now lookup
     each other without the board files support shim.  Rhyland Klein at
     NVIDIA did the work

   - New ST-Ericsson ABX500 hwmon driver.  The driver is heavily using
     the AB85xx core and depends on some recent changes to it, so that
     is why the driver comes through the battery tree.  It has an
     appropriate ack from the hwmon maintainer (i.e.  Guenter Roeck).
     Martin Persson at ST-Ericsson and Hongbo Zhang at Linaro authored
     the driver

   - Final bits to sync AB85xx ST-Ericsson changes into mainline.  The
     changes touch mfd parts, but these were acked by the appropriate
     MFD maintainer (ie Samuel Ortiz).  Lee Jones at Linaro did most of
     the work and lead the submission process.

  Minor changes, but still worth mentioning:

   - Battery temperature reporting fix for Nokia N900 phones
   - Versatile Express poweroff driver moved into drivers/power/reset/
   - Tree-wide: use devm_kzalloc() where appropriate
   - Tree-wide: dev_pm_ops cleanups/fixes"

* tag 'for-v3.10' of git://git.infradead.org/battery-2.6: (112 commits)
  pm2301-charger: Fix suspend/resume
  charger-manager: Use kmemdup instead of kzalloc + memcpy
  power_supply: Populate supplied_from hierarchy from the device tree
  power_supply: Add core support for supplied_from
  power_supply: Define Binding for power-supplies
  rx51_battery: Fix reporting temperature
  hwmon: Add ST-Ericsson ABX500 hwmon driver
  ab8500_bmdata: Export abx500_res_to_temp tables for hwmon
  ab8500_{bmdata,fg}: Add const attributes to some data arrays
  ab8500_bmdata: Eliminate CamelCase warning of some variables
  ab8500_btemp: Make ab8500_btemp_get* interfaces public
  goldfish_battery: Use resource_size()
  lp8788-charger: Use PAGE_SIZE for the sysfs read operation
  max8925_power: Use devm_kzalloc()
  da9030_battery: Use devm_kzalloc()
  da9052-battery: Use devm_kzalloc()
  ds2760_battery: Use devm_kzalloc()
  ds2780_battery: Use devm_kzalloc()
  gpio-charger: Use devm_kzalloc()
  isp1704_charger: Use devm_kzalloc()
  ...
2013-04-30 15:15:24 -07:00
Linus Torvalds 5d434fcb25 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina:
 "Usual stuff, mostly comment fixes, typo fixes, printk fixes and small
  code cleanups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (45 commits)
  mm: Convert print_symbol to %pSR
  gfs2: Convert print_symbol to %pSR
  m32r: Convert print_symbol to %pSR
  iostats.txt: add easy-to-find description for field 6
  x86 cmpxchg.h: fix wrong comment
  treewide: Fix typo in printk and comments
  doc: devicetree: Fix various typos
  docbook: fix 8250 naming in device-drivers
  pata_pdc2027x: Fix compiler warning
  treewide: Fix typo in printks
  mei: Fix comments in drivers/misc/mei
  treewide: Fix typos in kernel messages
  pm44xx: Fix comment for "CONFIG_CPU_IDLE"
  doc: Fix typo "CONFIG_CGROUP_CGROUP_MEMCG_SWAP"
  mmzone: correct "pags" to "pages" in comment.
  kernel-parameters: remove outdated 'noresidual' parameter
  Remove spurious _H suffixes from ifdef comments
  sound: Remove stray pluses from Kconfig file
  radio-shark: Fix printk "CONFIG_LED_CLASS"
  doc: put proper reference to CONFIG_MODULE_SIG_ENFORCE
  ...
2013-04-30 09:36:50 -07:00
Lars-Peter Clausen 6b170807cd pm2301-charger: Fix suspend/resume
The pm2301-charger driver implements runtime pm and at the same time uses
the legacy pm callbacks for suspend and resume. This does not work since
the I2C core wont look at the legacy pm callbacks if a driver has the 'pm'
field set. This patch fixes it by moving over to dev_pm_ops for
suspend/resume as well.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-04-16 19:00:01 -07:00
Andrei Epure f2c6a5fb25 charger-manager: Use kmemdup instead of kzalloc + memcpy
Patch found using coccinelle.

Signed-off-by: Andrei Epure <epure.andrei@gmail.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-04-16 18:56:38 -07:00
Rhyland Klein f6e0b081fb power_supply: Populate supplied_from hierarchy from the device tree
With this patch the power_supply_core will try to populate supplied_from
hierarchy from the device tree.

Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-04-16 18:51:16 -07:00
Rhyland Klein 5e0848c602 power_supply: Add core support for supplied_from
This patch adds support for supplies to register a list of char *'s which
represent the list of supplies which supply them. This is the opposite as
the supplied_to list.

This change maintains support for supplied_to until all drivers which make
use of it already are converted.

Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-04-16 18:35:31 -07:00
Pali Rohár 59584857be rx51_battery: Fix reporting temperature
This patch fixing units (1/10 °C) in which is temperature reported.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-04-16 18:28:02 -07:00
Hongbo Zhang ea2be6f210 ab8500_bmdata: Export abx500_res_to_temp tables for hwmon
This patch exports the thermistor resistance-to-temperature tables, so
that the hwmon driver can access them, and also adds the corresponding
table size variables.

Signed-off-by: Hongbo Zhang <hongbo.zhang@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-04-16 17:38:10 -07:00
Hongbo Zhang 2c89940786 ab8500_{bmdata,fg}: Add const attributes to some data arrays
This patch adds const attributes to AB8500 power and temperature related
read-only data arrays.

Signed-off-by: Hongbo Zhang <hongbo.zhang@linaro.org>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-04-16 17:34:36 -07:00
Hongbo Zhang 6c1f8e02cc ab8500_bmdata: Eliminate CamelCase warning of some variables
Some AB8500 power related variable names don't comply with kernel coding
rules, any new patch using these variables will result in CamelCase
warnings from checkpatch.pl, this patch re-name these variables.

Signed-off-by: Hongbo Zhang <hongbo.zhang@linaro.org>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-04-16 17:33:34 -07:00
Hongbo Zhang 6f780965aa ab8500_btemp: Make ab8500_btemp_get* interfaces public
Make ab8500_btemp_get_temp interface public, export it and also export the
ab8500_btemp_get, ab8500_btemp_get_batctrl_temp interfaces, so that the
ab8500 hwmon driver can use them.

Signed-off-by: Hongbo Zhang <hongbo.zhang@linaro.org>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-04-16 17:32:48 -07:00
Pali Rohár 8059c1c6be power: rx51_battery: Fix reporting correct values
Tell twl4030_madc_conversion that this driver needs raw values.
Driver twl4030_madc has some hardcoded values and conversation
functions which are incorrect for Nokia RX-51 board. This driver
rx51_battery expects raw values which convert itself.

This patch fixing values reported by power supply interface.
Before this patch driver reported always incorrect values on
3.8 kernel (sometimes design capacity was negative).

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Anton Vorontsov <anton@enomsg.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-08 16:36:27 +02:00
Silviu-Mihai Popescu a92d4c7d02 goldfish_battery: Use resource_size()
This uses the resource_size() function instead of explicit computation.

Signed-off-by: Silviu-Mihai Popescu <silviupopescu1990@gmail.com>
Signed-off-by: Andrei Epure <epure.andrei@gmail.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-03-31 23:39:40 -07:00
Kim, Milo 4b44a1ed82 lp8788-charger: Use PAGE_SIZE for the sysfs read operation
The sysfs allocates PAGE_SIZE. It is used by each R/W operation method.
Use it instead of another buffer size.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-03-31 23:33:19 -07:00
Jingoo Han feeb3a92b1 max8925_power: Use devm_kzalloc()
Use devm_kzalloc() to make cleanup paths more simple.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-03-31 23:25:53 -07:00
Jingoo Han bc67ea8e92 da9030_battery: Use devm_kzalloc()
Use devm_kzalloc() to make cleanup paths more simple.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-03-31 23:25:51 -07:00
Jingoo Han f0094958d9 da9052-battery: Use devm_kzalloc()
Use devm_kzalloc() to make cleanup paths more simple.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-03-31 23:25:49 -07:00
Jingoo Han 4ec730dc8c ds2760_battery: Use devm_kzalloc()
Use devm_kzalloc() to make cleanup paths more simple.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-03-31 23:25:47 -07:00
Jingoo Han 2cb12122b8 ds2780_battery: Use devm_kzalloc()
Use devm_kzalloc() to make cleanup paths more simple.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-03-31 23:25:45 -07:00
Jingoo Han b92ff855b9 gpio-charger: Use devm_kzalloc()
Use devm_kzalloc() to make cleanup paths more simple.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-03-31 23:25:42 -07:00
Jingoo Han 2a2ce52a40 isp1704_charger: Use devm_kzalloc()
Use devm_kzalloc() to make cleanup paths more simple.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-03-31 23:25:40 -07:00
Jingoo Han f3f66b3ea4 max8903_charger: Use devm_kzalloc()
Use devm_kzalloc() to make cleanup paths more simple.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-03-31 23:25:38 -07:00
Jingoo Han d4a20f57d3 max8997_charger: Use devm_kzalloc()
Use devm_kzalloc() to make cleanup paths more simple.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-03-31 23:25:36 -07:00
Jingoo Han acfbf47a90 max8998_charger: Use devm_kzalloc()
Use devm_kzalloc() to make cleanup paths more simple.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-03-31 23:25:34 -07:00
Jingoo Han c09dd7daba pcf50633-charger: Use devm_kzalloc()
Use devm_kzalloc() to make cleanup paths more simple.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-03-31 23:25:32 -07:00
Jingoo Han b852ac51e2 rx51_battery: Use devm_kzalloc()
Use devm_kzalloc() to make cleanup paths more simple.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-03-31 23:25:30 -07:00
Jingoo Han 3f8060a5fe 88pm860x_charger: Drop kfree of devm_kzalloc'd data
The devm_kzalloc function allocates memory that is released automatically,
when a driver detaches. Thus, there is no reason to explicitly call kfree
in probe or remove functions.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-03-31 23:25:17 -07:00
Jingoo Han f11d018fd6 wm831x_backup: Use devm_kzalloc()
Use devm_kzalloc() to make cleanup paths more simple.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-03-31 23:24:37 -07:00
Rhyland Klein 594f8f888d tps65090: Setup compatible property for dt
Setup the compatible property so that when this device is registered
through device tree, it can match the expected compatiblity string used in
the tps65090 driver.

Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-03-31 23:15:47 -07:00
Jingoo Han 4420dc2000 twl4030_charger: Use module_platform_driver_probe()
This patch uses module_platform_driver_probe() macro which makes the code
smaller and simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-03-31 23:04:20 -07:00
Lars-Peter Clausen 9c1d1af0cf sbs-battery: Use dev_pm_ops
Use dev_pm_ops instead of the deprecated legacy suspend/resume callbacks.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-03-31 23:01:17 -07:00
Lars-Peter Clausen 43cf454aba max17040_battery: Use dev_pm_ops
Use dev_pm_ops instead of the deprecated legacy suspend/resume callbacks.

Cc: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-03-31 23:01:15 -07:00
Lars-Peter Clausen cc6616f690 ds2782_battery: Use dev_pm_ops
Use dev_pm_ops instead of the deprecated legacy suspend/resume callbacks.

Cc: Evgeny Romanov <romanov@neurosoft.ru>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-03-31 23:01:10 -07:00
Sachin Kamat 075ed03ce6 sbs-battery: Use of_match_ptr() macro
This eliminates having an #ifdef returning NULL for the case when OF is
disabled.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-03-31 20:37:26 -07:00
Anton Vorontsov 18bc4e79fd Merge branch 'vexpress' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64
From Catalin Marinas <catalin.marinas@arm.com>:

 "... move the vexpress poweroff/restart code from arch/arm to
 driver/power/reset so that the code can be reused in arm64."
2013-03-30 15:47:40 -07:00
Catalin Marinas 65deb78285 arm: vexpress: Decouple vexpress-poweroff implementation from machine_desc
This patch adds the pm_power_off and arm_pm_restart variable settings to
the vexpress-poweroff.c driver to decouple it from the machine_desc
definition.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Pawel Moll <pawel.moll@arm.com>
2013-03-21 15:17:40 +00:00
Catalin Marinas 2655f51d0a arm: vexpress: Move the poweroff/restart code to drivers/power/reset
This patch moves the arch/arm/mach-vexpress/reset.c functionality to
drivers/platform/reset/ and adds the necessary Kconfig wiring.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Pawel Moll <pawel.moll@arm.com>
2013-03-21 15:17:39 +00:00
Masanari Iida 07f4225889 treewide: Fix typos in printk
Correct spelling typo in various drivers.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-03-20 16:26:32 +01:00
Syam Sidhardhan c6cc9fc9d4 s3c-adc-battery: Fix possible NULL pointer dereference
Check for (bat == NULL) has to be done before accessing bat

Signed-off-by: Syam Sidhardhan <s.syam@samsung.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-03-18 19:43:03 -07:00
Andrey Gelman 9239ebcffb test_power: Fix a bug in setting module parameter values
When the kernel loads a module, module params are processed prior to
calling module_init. As a result, setting module param value should not
have side effects, at least as long as the module has not been
initialized.

Signed-off-by: Andrey Gelman <andreyg@compulab.co.il>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-03-18 19:27:31 -07:00
Rhyland Klein 6f8da5df8c power_supply: Add support for tps65090-charger
This patch adds support for the tps65090 charger driver. This driver is
responsible for controlling the charger aspect of the tps65090 mfd.
Currently, this mainly consists of turning on and off the charger, but
some features of the charger can be supported through this driver
including:

- Enable Auto Recharge based on Battery voltage
- Fast Charge Safety Timer
- Maximum battery discharge current
- Maximum battery adapter current
- Enable External Charge
- Disable charging termination based on low charger current (supported)

Once the driver is accepted, later patches can add support for the
features above which are not yet supported.

Based on work by:

  Syed Rafiuddin <srafiuddin@nvidia.com>
  Laxman Dewangan <ldewangan@nvidia.com>

Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-03-18 19:20:05 -07:00
Felipe Balbi fd89149875 usb: phy: remove CONFIG_USB_OTG_UTILS
there are no more users of CONFIG_USB_OTG_UTILS
left in tree, we can remove it just fine.

[ kishon@ti.com : fixed a linking error due
	to original patch forgetting to change
	drivers/usb/Makefile ]

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18 11:18:08 +02:00
Felipe Balbi 820d08835d usb: power: pda_power: check against CONFIG_USB_PHY
CONFIG_USB_OTG_UTILS will be removed very
soon, so we should check CONFIG_USB_PHY
instead.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18 11:18:05 +02:00
Lee Jones b09f86dbfc ab8500-charger: Do not use [delayed_]work_pending()
There's no need to test whether a (delayed) work item is pending
before queueing, flushing or cancelling it.  Most uses are unnecessary
and quite a few of them are buggy.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-03-07 12:35:59 +08:00
lme00437 0577610e0e ab8500-fg: Change current calculation
This patch updates the gas gauge constant for electric current
calculation according to hardware specification.

Signed-off-by: Benoit GAUTHIER <benoit.gauthier-xsig@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com>
Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
Tested-by: Benoit GAUTHIER <benoit.gauthier-xsig@stericsson.com>
2013-03-07 12:35:59 +08:00
Lee Jones 4d3b4aa58a abx500-chargalg: Add charging current step interface
To prevent overheating, provide differnt steps of charging current
interface to allow thermal mitigation. This will provide possibility
to reduce gradually the charging current.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-03-07 12:35:58 +08:00
Rupesh Kumar 9b7f50e3ea pm2301-charger: Reference put missing after access
Added missing pm_runtime_put_sync in read & write.

Signed-off-by: Rupesh Kumar <rupesh.kumar@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Sandeep TRIPATHY <sandeep.tripathy@stericsson.com>
Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
2013-03-07 12:35:57 +08:00
Rupesh Kumar b64f51c4ad pm2301-charger: Wake device on register access
When USB  Dedicated or Standard host chargers are plugged into
the device, chargealg attempts to disable the PM2301 AC charger,
However, disabling PM2301 was failing because of it being in
runtime suepend mode & LPN pin being low.

Signed-off-by: Rupesh Kumar <rupesh.kumar@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com>
Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
2013-03-07 12:35:57 +08:00
Marcus Cooper 7a2cf9bacf ab8500-bm: Trivially fix up some incorrect and out-of-date comments
Some of the comments in the ab8500 drivers reflect the behaviour
of the original device. As this driver now supports newer devices
then these comments are now redundant. Also some IRQ comments are
incorrect.

Signed-off-by: Marcus Cooper <marcus.xm.cooper@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
Tested-by: Rabin VINCENT <rabin.vincent@stericsson.com>
2013-03-07 12:35:56 +08:00
Rupesh Kumar 0f80ba6318 pm2301-charger: Charging LED control for pm2301
The LED Indicator feature allows indicating through a led when the
PM2301 battery charging is active. SW shall not disable this LED.

Signed-off-by: Rupesh Kumar <rupesh.kumar@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com>
Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
2013-03-07 12:35:55 +08:00
lme00437 a21e22f2f3 pm2301-charger: lpn pin used only in C2C boards
This patch restricts use of LPN pin to C2C boards to avoid
conflict on HSI for GPIO 60 use.

Signed-off-by: Benoit GAUTHIER <benoit.gauthier-xsig@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Mustapha BEN-ZOUBEIR <mustapha.ben.zoubeir-xsig@stericsson.com>
Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
Tested-by: Benoit GAUTHIER <benoit.gauthier-xsig@stericsson.com>
2013-03-07 12:35:55 +08:00
Lee Jones 3c01b3676f ab8500-charger: Remove duplicate code
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-03-07 12:35:54 +08:00
srinidhi kasagar 1ee26af028 abx500-chargalg: Use module_platform_driver() rather
deprecate some boilerplate code by using module_platform_driver
helper macro. No functional changes.

Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-03-07 12:35:53 +08:00
Rupesh Kumar f70dfdec99 pm2301-charger: Removed unused code from PM2301 driver
Some of the headers and defines accrued over time are no longer
in use. Let's take the opportunity to remove a few of them.

Signed-off-by: Rupesh Kumar <rupesh.kumar@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com>
Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
2013-03-07 12:35:53 +08:00
Rabin Vincent 261c5136fa ab8500-charger: Run detect workaround only on AB8500
Only AB8500 has this hardware bug, so these works only need to be run
there.

Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com>
Reviewed-by: Martin SJOBLOM <martin.w.sjoblom@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2013-03-07 12:35:52 +08:00
Lee Jones aee2b8468c pm2301-charger: Add pm_runtime_resume & pm_runtime_suspend
To optimize the current consumption we use pm_runtime autosuspend
functions which execute the pm_runtime_suspend after a delay of
inactivity on the other hand we use pm_runtime_resume every time
we receive an interruption to wake up the pm2301.

Signed-off-by: M BenZoubeir <mustapha.ben.zoubeir-xsig@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
2013-03-07 12:35:51 +08:00
M BenZoubeir f4095a0f06 pm2301-charger: Adjust interrupt handler behavior
Signed-off-by: M BenZoubeir <mustapha.ben.zoubeir-xsig@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
2013-03-07 12:35:51 +08:00