Commit Graph

174 Commits

Author SHA1 Message Date
Jianping Liu 3154060704 tkernel: sync code to the same with tk4 pub/lts/0017-kabi
Sync code to the same with tk4 pub/lts/0017-kabi, except deleted rue
and wujing. Partners can submit pull requests to this branch, and we
can pick the commits to tk4 pub/lts/0017-kabi easly.

Signed-off-by: Jianping Liu <frankjpliu@tencent.com>
2024-06-12 13:13:20 +08:00
Jianping Liu c62d6b571d ock: sync codes to ock 5.4.119-20.0009.21
Gitee limit the repo's size to 3GB, to reduce the size of the code,
sync codes to ock 5.4.119-20.0009.21 in one commit.

Signed-off-by: Jianping Liu <frankjpliu@tencent.com>
2024-06-11 20:27:38 +08:00
Jianping Liu be16237b31 tkernel: add base tlinux kernel interfaces
Sync kernel codes to the same with 590eaf1fec ("Init Repo base on
linux 5.4.32 long term, and add base tlinux kernel interfaces."), which
is from tk4, and it is the base of tk4.

Signed-off-by: Jianping Liu <frankjpliu@tencent.com>
2024-06-11 20:09:33 +08:00
Andreas Gruenbacher 45eb05042d gfs2: Minor PAGE_SIZE arithmetic cleanups
Replace divisions by PAGE_SIZE with shifts by PAGE_SHIFT and similar.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-09-04 20:22:06 +02:00
Andreas Gruenbacher 0a6a4abc84 gfs2: Always mark inode dirty in fallocate
When allocating space with fallocate, always update the file timestamps
and mark the inode dirty, no matter if the FALLOC_FL_KEEP_SIZE flag is
set or not.  The inode needs to be marked dirty so that a subsequent
fsync will pick it up and any new allocations will make it to disk.
Filesystems like xfs and ext4 always update the timestamps, so make
gfs2 behave the same way.

Fixes xfstest generic/483.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-09-03 09:41:42 +02:00
Linus Torvalds 5010fe9f09 New for 5.3:
- Standardize parameter checking for the SETFLAGS and FSSETXATTR ioctls
   (which were the file attribute setters for ext4 and xfs and have now
   been hoisted to the vfs)
 - Only allow the DAX flag to be set on files and directories.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEUzaAxoMeQq6m2jMV+H93GTRKtOsFAl0aJgMACgkQ+H93GTRK
 tOuKkg//SJaxcB63uVPZk9hDraYTmyo9OXRRX6X9WwDKPTWwa88CUwS1ny1QF7Mt
 zMkgzG2/y2Rs9PQ0ARoPbh1hNb2CXnvA+xnzUEev1MW6UN/nTFMZEOPn2ZQ+DxQE
 gg/0U56kKgtjtXzBZVpTgHzSETivdXwHxFW3hiTtyRXg+4ulgDIZLOjN2wRB+Pdb
 X8ZmM6MqKOTbhQEXlw13TlCKBzoMjC1w4UU4rkZPjoSjAaUWiPfrk/XU7qgguf9p
 v1dbSN2dADQ19jzZ1dmggXnlJsRMZjk/ls5rxJlB5DHDbh6YgnA2TE+tYrtH28eB
 uyKfD+RQnMzRVdmH8PsMQRQQFXR2UYyprVP7a6wi6TkB+gytn7sR5uT4sbAhmhcF
 TiTYfYNRXzemHCewyOwOsUE/7oCeiJcdbqiPAHHD/jYLZfRjSXDcGzz3+7ZYZ3GO
 hRxUhpxHPbkmK4T2OxhzReCbRsLN/0BeEcDdLkNWmi2FTh3V1gYzMGkgI9wsVbsd
 pHjoGIHbMPWqktF/obuGq96WVfYBBaWJ6WNzQqKT4dQYAJBW2omxitXQHLpi6cjt
 hG5ncxa3cPpWx4t3Lx2hb0TPS7RyYvuoQIcS/Me2RWioxrwWrgnOqdHFfLEwWpfN
 jRowdWiGgOIsq8hMt7qycmGCXzbgsbaA/7oRqh8TiwM9taPOM4c=
 =uH2E
 -----END PGP SIGNATURE-----

Merge tag 'vfs-fix-ioctl-checking-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

Pull common SETFLAGS/FSSETXATTR parameter checking from Darrick Wong:
 "Here's a patch series that sets up common parameter checking functions
  for the FS_IOC_SETFLAGS and FS_IOC_FSSETXATTR ioctl implementations.

  The goal here is to reduce the amount of behaviorial variance between
  the filesystems where those ioctls originated (ext2 and XFS,
  respectively) and everybody else.

   - Standardize parameter checking for the SETFLAGS and FSSETXATTR
     ioctls (which were the file attribute setters for ext4 and xfs and
     have now been hoisted to the vfs)

   - Only allow the DAX flag to be set on files and directories"

* tag 'vfs-fix-ioctl-checking-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  vfs: only allow FSSETXATTR to set DAX flag on files and dirs
  vfs: teach vfs_ioc_fssetxattr_check to check extent size hints
  vfs: teach vfs_ioc_fssetxattr_check to check project id info
  vfs: create a generic checking function for FS_IOC_FSSETXATTR
  vfs: create a generic checking and prep function for FS_IOC_SETFLAGS
2019-07-12 16:54:37 -07:00
Christoph Hellwig 35af80aef9 gfs2: don't use buffer_heads in gfs2_allocate_page_backing
Rewrite gfs2_allocate_page_backing to call gfs2_iomap_get_alloc and operate on
struct iomap directly.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-07-03 14:45:18 +02:00
Christoph Hellwig f3915f83e8 gfs2: use page_offset in gfs2_page_mkwrite
Without casting page->index to a guaranteed 64-bit type, the value might be
treated as 32-bit on 32-bit platforms and thus get truncated.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-07-03 08:53:01 +02:00
Darrick J. Wong 5aca284210 vfs: create a generic checking and prep function for FS_IOC_SETFLAGS
Create a generic function to check incoming FS_IOC_SETFLAGS flag values
and later prepare the inode for updates so that we can standardize the
implementations that follow ext4's flag values.

Note that the efivarfs implementation no longer fails a no-op SETFLAGS
without CAP_LINUX_IMMUTABLE since that's the behavior in ext*.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: David Sterba <dsterba@suse.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
2019-07-01 08:25:34 -07:00
Bob Peterson 04aea0ca14 gfs2: Rename SDF_SHUTDOWN to SDF_WITHDRAWN
Before this patch, the superblock flag indicating when a file system
is withdrawn was called SDF_SHUTDOWN. This patch simply renames it to
the more obvious SDF_WITHDRAWN.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-06-27 21:26:35 +02:00
Thomas Gleixner 7336d0e654 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 398
Based on 1 normalized pattern(s):

  this copyrighted material is made available to anyone wishing to use
  modify copy or redistribute it subject to the terms and conditions
  of the gnu general public license version 2

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 44 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531081038.653000175@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:37:12 +02:00
Christoph Hellwig 81214bab58 iomap: wire up the iopoll method
Store the request queue the last bio was submitted to in the iocb
private data in addition to the cookie so that we find the right block
device.  Also refactor the common direct I/O bio submission code into a
nice little helper.

Signed-off-by: Christoph Hellwig <hch@lst.de>

Modified to use bio_set_polled().

Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-24 08:20:17 -07:00
NeilBrown 4d62d3f70b gfs2: properly initial file_lock used for unlock.
Rather than assuming all-zeros is sufficient, use the available API to
initialize the file_lock structure use for unlock.  VFS-level changes
will soon make it important that the list_heads in file_lock are
always properly initialized.

Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
2018-11-30 11:26:12 -05:00
Andreas Gruenbacher 21f09c4395 gfs2: Move rs_{sizehint, rgd_gh} fields into the inode
Move the rs_sizehint and rs_rgd_gh fields from struct gfs2_blkreserv
into the inode: they are more closely related to the inode than to a
particular reservation.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Steven Whitehouse <swhiteho@redhat.com>
2018-10-12 07:29:14 -05:00
Steve Whitehouse 6ddc5c3ddf gfs2: getlabel support
Add support for the GETFSLABEL ioctl in gfs2.
I tested this patch and it works as expected.

Signed-off-by: Steve Whitehouse <swhiteho@redhat.com>
Tested-by: Abhi Das <adas@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2018-10-09 07:06:16 -05:00
Andreas Gruenbacher 1d45bb7f9d gfs2: Use iomap for stuffed direct I/O reads
Remove the fallback code from direct to buffered I/O for stuffed reads.

For stuffed writes, we must keep the fallback code: the deferred glock
we are holding under direct I/O doesn't allow to write to the inode or
change the file size.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
2018-07-25 00:08:40 +02:00
Andreas Gruenbacher c25892827c gfs2: fallocate_chunk: Always initialize struct iomap
In fallocate_chunk, always initialize the iomap before calling
gfs2_iomap_get_alloc: future changes could otherwise cause things like
iomap.flags to leak across calls.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
2018-07-25 00:06:48 +02:00
Andreas Gruenbacher a3479c7fc0 Merge branch 'iomap-write' into linux-gfs2/for-next
Pull in the gfs2 iomap-write changes: Tweak the existing code to
properly support iomap write and eliminate an unnecessary special case
in gfs2_block_map.  Implement iomap write support for buffered and
direct I/O.  Simplify some of the existing code and eliminate code that
is no longer used:

  gfs2: Remove gfs2_write_{begin,end}
  gfs2: iomap direct I/O support
  gfs2: gfs2_extent_length cleanup
  gfs2: iomap buffered write support
  gfs2: Further iomap cleanups

This is based on the following changes on the xfs 'iomap-4.19-merge'
branch:

  iomap: add private pointer to struct iomap
  iomap: add a page_done callback
  iomap: generic inline data handling
  iomap: complete partial direct I/O writes synchronously
  iomap: mark newly allocated buffer heads as new
  fs: factor out a __generic_write_end helper

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2018-07-24 20:02:40 +02:00
Souptick Joarder 109dbb1e6f fs: gfs2: Adding new return type vm_fault_t
Use new return type vm_fault_t for gfs2_page_mkwrite
handler.

see commit 1c8f422059 ("mm: change return type to
vm_fault_t") for reference.

Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2018-07-24 20:02:11 +02:00
Andreas Gruenbacher 967bcc91b0 gfs2: iomap direct I/O support
The page unmapping previously done in gfs2_direct_IO is now done
generically in iomap_dio_rw.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
2018-07-02 16:27:32 +01:00
Andreas Gruenbacher 64bc06bb32 gfs2: iomap buffered write support
With the traditional page-based writes, blocks are allocated separately
for each page written to.  With iomap writes, we can allocate a lot more
blocks at once, with a fraction of the allocation overhead for each
page.

Split calculating the number of blocks that can be allocated at a given
position (gfs2_alloc_size) off from gfs2_iomap_alloc: that size
determines the number of blocks to allocate and reserve in the journal.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
2018-07-02 16:27:17 +01:00
Andreas Gruenbacher d505a96a3b gfs2: Further iomap cleanups
In gfs2_iomap_alloc, set the type of newly allocated extents to
IOMAP_MAPPED so that iomap_to_bh will set the bh states correctly:
otherwise, the bhs would not be marked as mapped, confusing
__mpage_writepage.  This means that we need to check for the IOMAP_F_NEW
flag in fallocate_chunk now.

Further clean up gfs2_iomap_get and implement gfs2_stuffed_iomap here
directly.  For reads beyond the end of the file, return holes instead of
failing with -ENOENT so that we can get rid of that special case in
gfs2_block_map.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
2018-07-02 16:26:01 +01:00
Andreas Gruenbacher 628e366df1 gfs2: Iomap cleanups and improvements
Clean up gfs2_iomap_alloc and gfs2_iomap_get.  Document how
gfs2_iomap_alloc works: it now needs to be called separately after
gfs2_iomap_get where necessary; this will be used later by iomap write.
Move gfs2_iomap_ops into bmap.c.

Introduce a new gfs2_iomap_get_alloc helper and use it in
fallocate_chunk: gfs2_iomap_begin will become unsuitable for fallocate
with proper iomap write support.

In gfs2_block_map and fallocate_chunk, zero-initialize struct iomap.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2018-06-04 07:56:51 -05:00
Andreas Gruenbacher fffb64127a gfs2: Zero out fallocated blocks in fallocate_chunk
Instead of zeroing out fallocated blocks in gfs2_iomap_alloc, zero them
out in fallocate_chunk, much higher up the call stack.  This gets rid of
gfs2's abuse of the IOMAP_ZERO flag as well as the gfs2 specific zeronew
buffer flag.  I can't think of a reason why zeroing out the blocks in
gfs2_iomap_alloc would have any benefits: there is no additional locking
at that level that would add protection to the newly allocated blocks.

While at it, change fallocate over from gs2_block_map to gfs2_iomap_begin.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
2018-03-29 06:50:32 -07:00
Andreas Gruenbacher 174d1232eb gfs2: Fix fallocate chunk size
The chunk size of allocations in __gfs2_fallocate is calculated
incorrectly.  The size can collapse, causing __gfs2_fallocate to
allocate one block at a time, which is very inefficient.  This needs
fixing in two places:

In gfs2_quota_lock_check, always set ap->allowed to UINT_MAX to indicate
that there is no quota limit.  This fixes callers that rely on
ap->allowed to be set even when quotas are off.

In __gfs2_fallocate, reset max_blks to UINT_MAX in each iteration of the
loop to make sure that allocation limits from one resource group won't
spill over into another resource group.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2018-03-08 09:26:20 -07:00
Bob Peterson 805c090750 GFS2: Log the reason for log flushes in every log header
This patch just adds the capability for GFS2 to track which function
called gfs2_log_flush. This should make it easier to diagnose
problems based on the sequence of events found in the journals.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
2018-01-23 07:39:20 -07:00
Bob Peterson c1696fb85d GFS2: Introduce new gfs2_log_header_v2
This patch adds a new structure called gfs2_log_header_v2 which is used
to store expanded fields into previously unused areas of the log headers
(i.e., this change is backwards compatible).  Some of these are used for
debug purposes so we can backtrack when problems occur.  Others are
reserved for future expansion.

This patch is based on a prototype from Steve Whitehouse.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2018-01-23 07:38:53 -07:00
Andreas Gruenbacher 4e56a6411f gfs2: Implement fallocate(FALLOC_FL_PUNCH_HOLE)
Implement the top-level bits of punching a hole into a file.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2018-01-18 21:15:58 +01:00
Andreas Gruenbacher b16f7e57b7 gfs2: Fix and clean up {GET,SET}FLAGS ioctl
Switch to a simple array for mapping between the FS_*_FL and GFS_DIF_*
flags.  Clarify how the mapping between FS_JOURNAL_DATA_FL and the
filesystem flags works.  The GFS2_DIF_SYSTEM flag cannot be set from
user space, so remove it from GFS2_FLAGS_USER_SET.  Fail with -EINVAL
when trying to set flags that are not supported instead of silently
ignoring those flags.

Partially fixes xfstest generic/424.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2017-10-31 14:26:57 +01:00
Bob Peterson cc555b09d8 GFS2: Take inode off order_write list when setting jdata flag
This patch fixes a deadlock caused when the jdata flag is set for
inodes that are already on the ordered write list. Since it is
on the ordered write list, log_flush calls gfs2_ordered_write which
calls filemap_fdatawrite. But since the inode had the jdata flag
set, that calls gfs2_jdata_writepages, which tries to start a new
transaction. A new transaction cannot be started because it tries
to acquire the log_flush rwsem which is already locked by the log
flush operation.

The bottom line is: We cannot switch an inode from ordered to jdata
until we eliminate any ordered data pages (via log flush) or any
log_flush operation afterward will create the circular dependency
above. So we need to flush the log before setting the diskflags to
switch the file mode, then we need to remove the inode from the
ordered writes list.

Before this patch, the log flush was done for jdata->ordered, but
that's wrong. If we're going from jdata to ordered, we don't need
to call gfs2_log_flush because the call to filemap_fdatawrite will
do it for us:

   filemap_fdatawrite() -> __filemap_fdatawrite_range()
      __filemap_fdatawrite_range() -> do_writepages()
         do_writepages() -> gfs2_jdata_writepages()
            gfs2_jdata_writepages() -> gfs2_log_flush()

This patch modifies function do_gfs2_set_flags so that if a file
has its jdata flag set, and it's already on the ordered write list,
the log will be flushed and it will be removed from the list
before setting the flag.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by: Abhijith Das <adas@redhat.com>
2017-10-31 14:26:47 +01:00
Andreas Gruenbacher 3a27411cb4 gfs2: Implement SEEK_HOLE / SEEK_DATA via iomap
So far, lseek on gfs2 did not report holes.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2017-10-31 14:26:35 +01:00
Andreas Gruenbacher 9b7c2ddb45 gfs2: Update ctime in setflags ioctl
The FS_IOC_SETFLAGS ioctl is supposed to update the inode ctime.
Fixes xfstests generic/277.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2017-09-25 12:33:18 -05:00
Linus Torvalds ec3604c7a5 Writeback error handling fixes for v4.14
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZrTy3AAoJEAAOaEEZVoIVaucP/ApBAj2S5wzvlV1u6l8E6ae7
 ZeEEZfcWwzRYlKjZAkTWqj9XvGpDGO5gLq4wsZK2edFAq++/MJF8ZVtN4tdZ1kUZ
 DUvRodtVOrT08Kp9wZXGT7JOFrf6U/6gMcR6p0MuWnHndeKYvlpcFi9NPT4EC9/z
 Zm9V7gtlPdSOha7eaSjUS0+vLERkxqXLBW3Av9QUOBP/lbI3lqIroGKeHDYnVdya
 2P/k5EcRRJMyJP6TqyYxmmJl+UWjJFMLvnlUDBslHnD/u3mIUhw3JLHYBjn5dZRE
 Xjq56IDPoXDUvzlBhtn/Uqyx+/wtwsNsylpmKv6K5G1JfdeuSsPVsCey+A1cqV64
 LpE5896wf9TmnmI9LNyh6vDn925xPSGBiF45UEp5f9aO7jXeY0MaEZ8g+ENqFIDK
 v4gtZdS9FhYHV+/l4qEwYMKrqSbwKEs1r1FT+f4wnABby1ojfdA57ZPlp5PV2Vjp
 szTp88Zkb7cMvZwEnWwxWofcJNmgS7uNahvnQF3IJ4ITsioEkuyYR3K4ZQMaaaV9
 wCp6G0FhXZaK3OI7o9WiDwaO2elp9Hxc8bnqKpiBbHZkY0NLh7/++5VxpeNbTHFy
 AGijQiiKGNNyYqNj93wq9jpVdMNjB0pXrHRxfav8v7MtQ+WfbEoAENF4T7hN7iXn
 UuF6eSWEC5O1UCRUk1A+
 =LLY3
 -----END PGP SIGNATURE-----

Merge tag 'wberr-v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux

Pull writeback error handling updates from Jeff Layton:
 "This pile continues the work from last cycle on better tracking
  writeback errors. In v4.13 we added some basic errseq_t infrastructure
  and converted a few filesystems to use it.

  This set continues refining that infrastructure, adds documentation,
  and converts most of the other filesystems to use it. The main
  exception at this point is the NFS client"

* tag 'wberr-v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
  ecryptfs: convert to file_write_and_wait in ->fsync
  mm: remove optimizations based on i_size in mapping writeback waits
  fs: convert a pile of fsync routines to errseq_t based reporting
  gfs2: convert to errseq_t based writeback error reporting for fsync
  fs: convert sync_file_range to use errseq_t based error-tracking
  mm: add file_fdatawait_range and file_write_and_wait
  fuse: convert to errseq_t based error tracking for fsync
  mm: consolidate dax / non-dax checks for writeback
  Documentation: add some docs for errseq_t
  errseq: rename __errseq_set to errseq_set
2017-09-06 14:11:03 -07:00
Jeff Layton d07a6ac7b6 gfs2: convert to errseq_t based writeback error reporting for fsync
Also, fix a place where a writeback error might get dropped in the
gfs2_is_jdata case.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
2017-08-01 08:39:29 -04:00
Andreas Gruenbacher 283c9a97be gfs2: Lock holder cleanup (fixup)
Function gfs2_holder_initialized should be used in do_flock as well.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2017-07-17 13:39:15 -05:00
Andrew Price d4d7fc12b6 gfs2: Re-enable fallocate for the rindex
Commit 86066914ed "gfs2: Don't support
fallocate on jdata files" removed the ability of gfs2_grow to reserve
space at the end of the rindex, which could prevent a second gfs2_grow
from succeeding if the fs is full. Allow fallocate to work on the rindex
once again.

Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2017-04-05 11:45:26 -04:00
Dave Jiang 11bac80004 mm, fs: reduce fault, page_mkwrite, and pfn_mkwrite to take only vmf
->fault(), ->page_mkwrite(), and ->pfn_mkwrite() calls do not need to
take a vma and vmf parameter when the vma already resides in vmf.

Remove the vma parameter to simplify things.

[arnd@arndb.de: fix ARM build]
  Link: http://lkml.kernel.org/r/20170125223558.1451224-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/148521301778.19116.10840599906674778980.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 17:46:54 -08:00
Linus Torvalds 7c0f6ba682 Replace <asm/uaccess.h> with <linux/uaccess.h> globally
This was entirely automated, using the script by Al:

  PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
  sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
        $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)

to do the replacement at the end of the merge window.

Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-24 11:46:01 -08:00
Linus Torvalds d1f5323370 Merge branch 'work.splice_read' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull VFS splice updates from Al Viro:
 "There's a bunch of branches this cycle, both mine and from other folks
  and I'd rather send pull requests separately.

  This one is the conversion of ->splice_read() to ITER_PIPE iov_iter
  (and introduction of such). Gets rid of a lot of code in fs/splice.c
  and elsewhere; there will be followups, but these are for the next
  cycle...  Some pipe/splice-related cleanups from Miklos in the same
  branch as well"

* 'work.splice_read' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  pipe: fix comment in pipe_buf_operations
  pipe: add pipe_buf_steal() helper
  pipe: add pipe_buf_confirm() helper
  pipe: add pipe_buf_release() helper
  pipe: add pipe_buf_get() helper
  relay: simplify relay_file_read()
  switch default_file_splice_read() to use of pipe-backed iov_iter
  switch generic_file_splice_read() to use of ->read_iter()
  new iov_iter flavour: pipe-backed
  fuse_dev_splice_read(): switch to add_to_pipe()
  skb_splice_bits(): get rid of callback
  new helper: add_to_pipe()
  splice: lift pipe_lock out of splice_to_pipe()
  splice: switch get_iovec_page_array() to iov_iter
  splice_to_pipe(): don't open-code wakeup_pipe_readers()
  consistent treatment of EFAULT on O_DIRECT read/write
2016-10-07 15:36:58 -07:00
Al Viro 82c156f853 switch generic_file_splice_read() to use of ->read_iter()
... and kill the ->splice_read() instances that can be switched to it

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-10-05 18:23:56 -04:00
Andreas Gruenbacher d7c436cd60 gfs2: Update file times after grabbing glock
In gfs2_page_mkwrite, grab the inode glock in EX mode before calling
file_update_time: grabbing the lock may result in a call to
gfs2_dinode_in, which will reset the file times to their on-disk state.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2016-09-26 13:20:19 -05:00
Andreas Gruenbacher 6df9f9a253 gfs2: Lock holder cleanup
Make the code more readable by cleaning up the different ways of
initializing lock holders and checking for initialized lock holders:
mark lock holders as uninitialized by setting the holder's glock to NULL
(gfs2_holder_mark_uninitialized) instead of zeroing out the entire
object or using a separate flag.  Recognize initialized holders by their
non-NULL glock (gfs2_holder_initialized).  Don't zero out holder objects
which are immeditiately initialized via gfs2_holder_init or
gfs2_glock_nq_init.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2016-06-27 09:47:09 -05:00
Linus Torvalds be1332c099 We've got nine patches this time:
- Abhi Das has two patches that fix a GFS2 splice issue (and an adjustment).
 - Ben Marzinski has a patch which allows the proper unmount of a GFS2
   file system after hitting a withdraw error.
 - I have a patch to fix a problem where GFS2 would dereference an error
   value, plus three cosmetic / refactoring patches.
 - Daniel DeFreez has a patch to fix two glock reference count problems,
   where GFS2 was not properly "uninitializing" its glock holder on error
   paths.
 - Denys Vlasenko has a patch to change a function to not be inlined,
   thus reducing the memory footprint of the GFS2 module.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJXP2KLAAoJENeLYdPf93o7nScH/jlDCv+JzwBwAiFEVelgB657
 lFY+Q3bPvmcTaHiOqXzco7U1EeyvAuZ+x9duaFBBEGC2/NydIbkAdCP1XjDOTAGZ
 aVVAP8qov4adFiXTfBdzMYjJ7DArOy/JRnlC8WK5OiD/3yxsXJZNlAHTgjjL/ZMq
 PkhjxX2Lc9ZHGF9YIFTyeoBlqf1qO6WbhkxvSNefgq3c702QPM+T9XND5T1duGDF
 ThEcXS2DRRoE+6wr3h+ruvS5kcfxXRLLausAgqNpj2FYQOFCQ6XXgGK8pyXA5V/t
 3Vh8mHW0VmSjAfrRWslCRjd+APXoOf+7QHqOHUAA1dvQ6CGfC9qTETH9Wp32JCI=
 =8g+a
 -----END PGP SIGNATURE-----

Merge tag 'gfs2-4.7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2

Pull GFS2 updates from Bob Peterson:
 "We've got nine patches this time:

   - Abhi Das has two patches that fix a GFS2 splice issue (and an
     adjustment).

   - Ben Marzinski has a patch which allows the proper unmount of a GFS2
     file system after hitting a withdraw error.

   - I have a patch to fix a problem where GFS2 would dereference an
     error value, plus three cosmetic / refactoring patches.

   - Daniel DeFreez has a patch to fix two glock reference count
     problems, where GFS2 was not properly "uninitializing" its glock
     holder on error paths.

   - Denys Vlasenko has a patch to change a function to not be inlined,
     thus reducing the memory footprint of the GFS2 module"

* tag 'gfs2-4.7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  GFS2: Refactor gfs2_remove_from_journal
  GFS2: Remove allocation parms from gfs2_rbm_find
  gfs2: use inode_lock/unlock instead of accessing i_mutex directly
  GFS2: Add calls to gfs2_holder_uninit in two error handlers
  GFS2: Don't dereference inode in gfs2_inode_lookup until it's valid
  GFS2: fs/gfs2/glock.c: Deinline do_error, save 1856 bytes
  gfs2: Use gfs2 wrapper to sync inode before calling generic_file_splice_read()
  GFS2: Get rid of dead code in inode_go_demote_ok
  GFS2: ignore unlock failures after withdraw
2016-05-20 15:11:26 -07:00
Linus Torvalds c2e7b20705 Merge branch 'work.preadv2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs cleanups from Al Viro:
 "More cleanups from Christoph"

* 'work.preadv2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  nfsd: use RWF_SYNC
  fs: add RWF_DSYNC aand RWF_SYNC
  ceph: use generic_write_sync
  fs: simplify the generic_write_sync prototype
  fs: add IOCB_SYNC and IOCB_DSYNC
  direct-io: remove the offset argument to dio_complete
  direct-io: eliminate the offset argument to ->direct_IO
  xfs: eliminate the pos variable in xfs_file_dio_aio_write
  filemap: remove the pos argument to generic_file_direct_write
  filemap: remove pos variables in generic_file_read_iter
2016-05-17 15:05:23 -07:00
Al Viro 1d1bb236bc gfs2: switch to ->iterate_shared()
protected by glock and already used without locking the directory
by gfs2_get_name()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-12 17:00:20 -04:00
Abhi Das 80f4781d2c gfs2: use inode_lock/unlock instead of accessing i_mutex directly
i_mutex has been replaced by i_rwsem and directly accessing the
non-existent i_mutex breaks the kernel build.

Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2016-05-02 07:07:01 -05:00
Christoph Hellwig dde0c2e798 fs: add IOCB_SYNC and IOCB_DSYNC
This will allow us to do per-I/O sync file writes, as required by a lot
of fileservers or storage targets.

XXX: Will need a few additional audits for O_DSYNC

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-01 19:58:39 -04:00
Daniel DeFreez 9c7fe83530 GFS2: Add calls to gfs2_holder_uninit in two error handlers
This patch fixes two locations that do not call gfs2_holder_uninit
if gfs2_glock_nq returns an error.

Signed-off-by: Daniel DeFreez <dcdefreez@ucdavis.edu>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2016-04-19 19:59:11 -04:00
Abhi Das 611526756a gfs2: Use gfs2 wrapper to sync inode before calling generic_file_splice_read()
gfs2_file_splice_read() f_op grabs and releases the cluster-wide
inode glock to sync the inode size to the latest.

Without this, generic_file_splice_read() uses an older i_size value
and can return EOF for valid offsets in the inode.

Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2016-04-05 12:06:15 -04:00
Kirill A. Shutemov 09cbfeaf1a mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.

This promise never materialized.  And unlikely will.

We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE.  And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.

Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.

Let's stop pretending that pages in page cache are special.  They are
not.

The changes are pretty straight-forward:

 - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};

 - page_cache_get() -> get_page();

 - page_cache_release() -> put_page();

This patch contains automated changes generated with coccinelle using
script below.  For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.

The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.

There are few places in the code where coccinelle didn't reach.  I'll
fix them manually in a separate patch.  Comments and documentation also
will be addressed with the separate patch.

virtual patch

@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT

@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE

@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK

@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)

@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)

@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-04 10:41:08 -07:00