This patch adds IPC support. This patch also enables IPC in all supported
platforms based on has_ipc flag.
IPC (Isochronous Priority Control) is the hardware feature, which
dynamically controls the memory read priority of Display.
When IPC is enabled, plane read requests are sent at high priority until
filling above the transition watermark, then the requests are sent at
lower priority until dropping below the level 0 watermark.
The lower priority requests allow other memory clients to have better
memory access. When IPC is disabled, all plane read requests are sent at
high priority.
Changes since V1:
- Remove commandline parameter to disable ipc
- Address Paulo's comments
Changes since V2:
- Address review comments
- Set ipc_enabled flag
Changes since V3:
- move ipc_enabled flag assignment inside intel_ipc_enable function
Changes since V4:
- Re-enable IPC after suspend/resume
Changes since V5:
- Enable IPC for all gen >=9 except SKL
Changes since V6:
- fix commit msg
- after resume program IPC based on SW state.
Changes since V7:
- Modify IPC support check based on HAS_IPC macro (suggested by Chris)
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170817134529.2839-8-mahesh1.kumar@intel.com
New Isochronous Priority Control (IPC) capability is introduced in newer
GEN platforms. This patch adds a device info flag to indicate if platform
supports IPC. Patch also sets this flag in supported platforms.
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170817134529.2839-7-mahesh1.kumar@intel.com
CNL:A & CNL:B have same workaround as KBL to increase wm level latency
by 4us if IPC is enabled.
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170817134529.2839-6-mahesh1.kumar@intel.com
IF IPC is enabled LINETIME_WM value should be half of calculated value
line time = ROUNDDOWN(1/2 * Calculated Line Time)
Earlier code was rounding-up the value, But updated Bspec says we should
take the ROUNDDOWN. This patch corrects that as well.
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170817134529.2839-5-mahesh1.kumar@intel.com
GEN > 9 require transition WM to be programmed if IPC is enabled.
This patch calculates & enable transition WM for supported platforms.
If transition WM is enabled, Plane read requests are sent at high
priority until filling above the transition watermark, then the
requests are sent at lower priority until dropping below the level-0 WM.
The lower priority requests allow other memory clients to have better
memory access.
transition minimum is the minimum amount needed for trans_wm to work to
ensure the demote does not happen before enough data has been read to
meet the level 0 watermark requirements.
transition amount is configurable value. Higher values will
tend to cause longer periods of high priority reads followed by longer
periods of lower priority reads. Tuning to lower values will tend to
cause shorter periods of high and lower priority reads.
Keeping transition amount to 10 in this patch, as suggested by HW team.
Changes since V1:
- Address review comments from Maarten
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170817134529.2839-4-mahesh1.kumar@intel.com
Plane configuration parameters doesn't change for each WM-level
calculation. Currently we compute same parameters 8 times for each
wm-level.
This patch optimizes it by calculating these parameters in beginning
& reuse during each level-wm calculation.
Changes since V1:
- rebase on top of Rodrigo's series for CNL
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170817134529.2839-3-mahesh1.kumar@intel.com
As per suggestion from Jani, cleanup the code. Cleanup includes
- Instead of left shifting & check, compare with U32/16_MAX
- Use typecast instead of clamp_t
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170817134529.2839-2-mahesh1.kumar@intel.com
Exercise the new __sg_alloc_table_from_pages API (and through
it also the old sg_alloc_table_from_pages), checking that the
created table has the expected number of segments depending on
the sequence of input pages and other conditions.
v2: Move to data driven for readability.
v3: Add some more testcases and -fsanitize=undefined. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170906145506.14952-1-tvrtko.ursulin@linux.intel.com
[tursulin: whitespace fixup]
With the addition of __sg_alloc_table_from_pages we can control
the maximum coalescing size and eliminate a separate path for
allocating backing store here.
Similar to 871dfbd67d ("drm/i915: Allow compaction upto
SWIOTLB max segment size") this enables more compact sg lists to
be created and so has a beneficial effect on workloads with many
and/or large objects of this class.
v2:
* Rename helper to i915_sg_segment_size and fix swiotlb override.
* Commit message update.
v3:
* Actually include the swiotlb override fix.
v4:
* Regroup parameters a bit. (Chris Wilson)
v5:
* Rebase for swiotlb_max_segment.
* Add DMA map failure handling as in abb0deacb5
("drm/i915: Fallback to single PAGE_SIZE segments for DMA remapping").
v6: Handle swiotlb_max_segment() returning 1. (Joonas Lahtinen)
v7: Rebase.
v8: Commit spelling fix.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170803091417.23677-1-tvrtko.ursulin@linux.intel.com
Drivers like i915 benefit from being able to control the maxium
size of the sg coalesced segment while building the scatter-
gather list.
Introduce and export the __sg_alloc_table_from_pages function
which will allow it that control.
v2: Reorder parameters. (Chris Wilson)
v3: Fix incomplete reordering in v2.
v4: max_segment needs to be page aligned.
v5: Rebase.
v6: Rebase.
v7: Fix spelling in commit and mention max segment size in
__sg_alloc_table_from_pages kerneldoc. (Andrew Morton)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: linux-kernel@vger.kernel.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170803091351.23594-1-tvrtko.ursulin@linux.intel.com
Since the scatterlist length field is an unsigned int, make
sure that sg_alloc_table_from_pages does not overflow it while
coalescing pages to a single entry.
v2: Drop reference to future use. Use UINT_MAX.
v3: max_segment must be page aligned.
v4: Do not rely on compiler to optimise out the rounddown.
(Joonas Lahtinen)
v5: Simplified loops and use post-increments rather than
pre-increments. Use PAGE_MASK and fix comment typo.
(Andy Shevchenko)
v6: Commit spelling fix.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170803091312.22875-1-tvrtko.ursulin@linux.intel.com
Scatterlist entries have an unsigned int for the offset so
correct the sg_alloc_table_from_pages function accordingly.
Since these are offsets withing a page, unsigned int is
wide enough.
Also converts callers which were using unsigned long locally
with the lower_32_bits annotation to make it explicitly
clear what is happening.
v2: Use offset_in_page. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Pawel Osciak <pawel@osciak.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Tomasz Stanislawski <t.stanislaws@samsung.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: linux-media@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> (v1)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170731185512.20010-1-tvrtko.ursulin@linux.intel.com
The original gen4 has an issue where writes (both render and blt) into
snoopable pages are lost. We've previously worked around this in
userspace (ddx, igt) by simply not requesting snoopable buffers, but upon
rediscovering this problem for a third time, make the kernel reject such
requests with -ENODEV.
This disables snooping on userspace buffers for i965g and i965gm (original
gen4) machines.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170906192424.26970-1-chris@chris-wilson.co.uk
Wa for B-stepping only.
A for a hang issue that requires throttling EU performace
to 12.5% to avoid back pressure to thread dispatch
v2: Rebased. No change from v1.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Oscar Mateo <oscar.mateo@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170906220325.24524-1-rodrigo.vivi@intel.com
Skip compressing 1 segment at the end of the frame,
avoid a pixel count mismatch nuke event when last active
pixel and dummy pixel has same color for Odd Plane
Width / Height.
For both platforms Gemini Lake and Cannon Lake.
v2: Use function-like macro and also use mask to clean
to make sure bit 11 is 0. (Suggested by Paulo).
v3: Add Display WA notation and also apply for GLK.
Both Forgotten on v2.
Using "GLK_" prefix since GLK came before CNL.
v4: Forgot to "|=" when moving directly macro to masked
val. (Noticed by Paulo.)
v5: Rebased on top of 0a46ddd57c ("drm/i915/cnp: Wa 1181:
Fix Backlight issue")
Cc: Imre Deak <imre.deak@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170905193013.31710-1-rodrigo.vivi@intel.com
This enables the Mesa driver to advertise support for ARB_timer_query, and
thus an OpenGL version higher than 3.2.
Suggested-by: Ben Widawsky <ben@bwidawsk.net>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170905184507.30046-1-nanley.g.chery@intel.com
Currently we define any !llc machine as using snoop instead. However,
some platforms run into trouble using snoop that we would like to
disable, and to do so easily we want to be able to use the static
device_info tables.
v2: Leave the old snoop = !llc as a warning for the time being to check
that all stanzas are filled as either llc or snoop.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170906105653.3665-1-chris@chris-wilson.co.uk
The early gen3 machines (i915g/Grantsdale and i915gm/Alviso) share a lot
of characteristics in their MI/GTT blocks with gen2, and in particular
can only use physical addresses in MI_STORE_DATA_IMM. This makes it
incompatible with our usage, so include those two machines in the
blacklist to prevent usage.
v2: Make it easy for gcc and rewrite it as a switch to save some space.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20170906152859.5304-1-chris@chris-wilson.co.uk
Ville Syrjälä spotted that PGETBL_CTL was losing its enable bit upon a
reset. That was causing the display to show garbage on his 945gm. On my
i915gm the effect was far more severe; re-enabling the display following
the reset without PGETBL_CTL being enabled lead to an immediate hard
hang.
We do have a routine to re-enable PGETBL_CTL which is applicable to
gen2-4, although on gen4 it is documented that a graphics reset doesn't
alter the register (no such wording is given for gen3) and should be safe
to call to punch back in the enable bit. However, that leaves the question
of whether we need to completely re-initialise the register and the
rest of the GSM. For g33/pnv/gen4+, where we do have a configurable
page table, its contents do seem to be kept, and so we should be able to
recover without having to reinitialise the GTT from scratch (as prior to
g33, that register is configured by the BIOS and we leave alone except
for the enable bit).
This appears to have been broken by commit 5fbd0418ee ("drm/i915:
Re-enable GGTT earlier during resume on pre-gen6 platforms"), which
moved the intel_enable_gtt() from i915_gem_init_hw() (also used by
reset) to add it earlier during hw init and resume, missing the reset
path.
v2: Find the culprit, rearrange ggtt_enable to be before gem_init_hw to
match init/resume
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 5fbd0418ee ("drm/i915: Re-enable GGTT earlier during resume on pre-gen6 platforms")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101852
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170906111405.27110-1-chris@chris-wilson.co.uk
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
This workaround fixes a CNL PCH bug when changing
backlight from a lower frequency to a higher frequency.
During random reboot cycles, display backlight seems to
be off/ dim for 2-3 mins.
The only functional change on this patch is to
set bit 13 of 0xC2020 for CNL PCH.
The rest of patch is organizing identation around
those bits definitions and re-organizing CFL workarounds.
v2: Only add the bit that matters without touching others
around (Jani).
Rebase on top of clock gating functions rename.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Arthur J Runyan <arthur.j.runyan@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170831045223.3960-1-rodrigo.vivi@intel.com
Add the missing __user to the urelocs cast to fix the following sparse
warning:
i915_gem_execbuffer.c:1541:47: warning: cast removes address space of expression
i915_gem_execbuffer.c:1541:62: warning: incorrect type in argument 2 (different address spaces)
i915_gem_execbuffer.c:1541:62: expected void const [noderef] <asn:1>*from
i915_gem_execbuffer.c:1541:62: got char *
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 2889caa923 ("drm/i915: Eliminate lots of iterations over the execobjects array")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170901165434.24636-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc
Sparse complains that these integers from which we form void __user *,
and so we don't need the annotation itself inside the uABI.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170901145729.21363-2-chris@chris-wilson.co.uk
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Don't cast away the __iomem from the io_mapping functions so that
sparse won't be so unhappy when we pass the pointer to the unmap
functions. Instead let's move the cast to where we actually use the
pointer.
Fixes the following sparse warnings:
i915_gem.c:1022:33: warning: incorrect type in argument 1 (different address spaces)
i915_gem.c:1022:33: expected void [noderef] <asn:2>*vaddr
i915_gem.c:1022:33: got void *[assigned] vaddr
i915_gem.c:1027:34: warning: incorrect type in argument 1 (different address spaces)
i915_gem.c:1027:34: expected void [noderef] <asn:2>*vaddr
i915_gem.c:1027:34: got void *[assigned] vaddr
i915_gem.c:1199:33: warning: incorrect type in argument 1 (different address spaces)
i915_gem.c:1199:33: expected void [noderef] <asn:2>*vaddr
i915_gem.c:1199:33: got void *[assigned] vaddr
i915_gem.c:1204:34: warning: incorrect type in argument 1 (different address spaces)
i915_gem.c:1204:34: expected void [noderef] <asn:2>*vaddr
i915_gem.c:1204:34: got void *[assigned] vaddr
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170901171252.31025-2-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
radix_tree_for_each_slot() wants an __rcu annotated pointer for the
slot. So let's add the annotation.
Fixes the following sparse warnings:
i915_gem.c:2217:9: warning: incorrect type in assignment (different address spaces)
i915_gem.c:2217:9: expected void **slot
i915_gem.c:2217:9: got void [noderef] <asn:4>**
i915_gem.c:2217:9: warning: incorrect type in assignment (different address spaces)
i915_gem.c:2217:9: expected void **slot
i915_gem.c:2217:9: got void [noderef] <asn:4>**
i915_gem.c:2217:9: warning: incorrect type in argument 1 (different address spaces)
i915_gem.c:2217:9: expected void [noderef] <asn:4>**slot
i915_gem.c:2217:9: got void **slot
i915_gem.c:2217:9: warning: incorrect type in assignment (different address spaces)
i915_gem.c:2217:9: expected void **slot
i915_gem.c:2217:9: got void [noderef] <asn:4>**
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 96d7763452 ("drm/i915: Use a radixtree for random access to the object's backing storage")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170901171252.31025-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
In the past, vGPU alloc fence registers by walking through mm.fence_list
to find fence which pin_count = 0 and vma is empty. vGPU may not find
enough fence registers this way. Because a fence can be bind to vma even
though it is not in using. We have found such failure many times these
days.
An option to resolve this issue is that we can force-remove fence from
vma in this case.
This patch added two new api to the fence management code:
- i915_reserve_fence() will try to find a free fence from fence_list
and force-remove vma if need.
- i915_unreserve_fence() reclaim a reserved fence after vGPU has
finished.
With this change, the fence management is more clear to work with vGPU.
GVTg do not need remove fence from fence_list in private.
v3: (Chris)
- Add struct_mutex lock assertion.
- Only count for unpinned fence.
v2: (Chris)
- Rename the new api for symmetry.
- Add safeguard to ensure at least 1 fence remained for host display.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1504512061-5892-1-git-send-email-changbin.du@intel.com
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
The header comment in include/trace/define_trace.h specifies that the
TRACE_INCLUDE_PATH needs to be relative to the define_trace.h header
rather than the trace file including it. Most instances get that wrong
and work around it by adding the $(src) directory to the include path.
While this works, it is preferable to refer to the correct path to the
trace file in the first place and avoid any workaround.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170901144954.19620-4-thierry.reding@gmail.com
Add back the GEN8_PPAT_WB cache attributes in cnl_setup_private_ppat(),
which are missed on CNL.
Fixes: 4e34935fcf ("drm/i915/cnl: Setup PAT Index.")
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1504208177-27784-1-git-send-email-zhi.a.wang@intel.com
Use enum pipe for PCH transcoders also in the FIFO underrun code.
Fixes the following new sparse warnings:
intel_fifo_underrun.c:340:49: warning: mixing different enum types
intel_fifo_underrun.c:340:49: int enum pipe versus
intel_fifo_underrun.c:340:49: int enum transcoder
intel_fifo_underrun.c:344:49: warning: mixing different enum types
intel_fifo_underrun.c:344:49: int enum pipe versus
intel_fifo_underrun.c:344:49: int enum transcoder
intel_fifo_underrun.c:397:57: warning: mixing different enum types
intel_fifo_underrun.c:397:57: int enum pipe versus
intel_fifo_underrun.c:397:57: int enum transcoder
intel_fifo_underrun.c:398:17: warning: mixing different enum types
intel_fifo_underrun.c:398:17: int enum pipe versus
intel_fifo_underrun.c:398:17: int enum transcoder
Cc: Matthias Kaehlcke <mka@chromium.org>
Fixes: a21960339c ("drm/i915: Consistently use enum pipe for PCH transcoders")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170901143123.7590-3-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Make gmbus_lock_ops and proxy_lock_ops static to appease sparse
intel_i2c.c:652:34: warning: symbol 'gmbus_lock_ops' was not declared. Should it be static?
intel_sdvo.c:2981:34: warning: symbol 'proxy_lock_ops' was not declared. Should it be static?
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: a85066840d ("drm/i915: Rework sdvo proxy i2c locking")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170901143123.7590-2-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Make i9xx_load_ycbcr_conversion_matrix() static to appease sparse:
intel_color.c:110:6: warning: symbol 'i9xx_load_ycbcr_conversion_matrix' was not declared. Should it be static?
Cc: Shashank Sharma <shashank.sharma@intel.com>
Fixes: 25edf91501 ("drm/i915: prepare csc unit for YCBCR420 output")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170901143123.7590-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Eliminate plane->state and crtc->state usage from
intel_plane_atomic_check_with_state() and its callers. Instead pass the
proper states in or dig them up from the top level atomic state.
Note that intel_plane_atomic_check_with_state() itself isn't allowed to
use the top level atomic state as there is none when it gets called from
the legacy cursor short circuit path.
v2: Rename some variables for easier comprehension (Maarten)
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170823152226.22938-4-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Up to Coffeelake we could deduce this GT number from the device ID.
This doesn't seem to be the case anymore. This change reorders pciids
per GT and adds a gt field to intel_device_info. We set this field on
the following platforms :
- SNB/IVB/HSW/BDW/SKL/KBL/CFL/CNL
Before & After :
$ modinfo drivers/gpu/drm/i915/i915.ko | grep ^alias | wc -l
209
v2: Add SNB & IVB (Chris)
v3: Fix compilation error in early-quirks (Lionel)
v4: Fix inconsistency between FEATURE/PLATFORM macros (Ville)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170830161208.29221-2-lionel.g.landwerlin@intel.com
This patch fixes the DP AUX CH timeouts observed during CI runs causing
CI Failures on a specific PCI device. This issue was fixed previously
by adding a quirk but looks like we need to increase this delay even more
in order to get rid all the DP AUX CH timeouts.
Fixes: c99a259b4b ("drm/i915/edp: Add a T12 panel delay quirk to fix
DP AUX CH timeouts")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101144
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Tomi Sarvela <tomi.p.sarvela@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1502823591-25310-1-git-send-email-manasi.d.navare@intel.com
Pass the appropriate new crtc state explicitly to
intel_pipe_update_start/end() instead of of mucking around with
crtc->state.
v2: The mmio flip stuff is gone
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170823152226.22938-2-ville.syrjala@linux.intel.com
Currently the .modeset_calc_cdclk() hooks check the final cdclk value
against the max allowed. That's not really sufficient since the low
level calc_cdclk() functions effectively clamp the minimum required
cdclk to the max supported by the platform. Hence if the minimum
required exceeds the platforms capabilities we'd keep going anyway
using the max cdclk frequency.
To fix that let's move the check earlier into
intel_crtc_compute_min_cdclk() and we'll check the minimum required
cdclk of the pipe against the maximum supported by the platform.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170710193347.8734-2-ville.syrjala@linux.intel.com
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Make the min_pixclk thing less confusing by changing it to track
the minimum acceptable cdclk frequency instead. This means moving
the application of the guardbands to a slightly higher level from
the low level platform specific calc_cdclk() functions.
The immediate benefit is elimination of the confusing 2x factors
on GLK/CNL+ in the audio workarounds (which stems from the fact
that the pipes produce two pixels per clock).
v2: Keep cdclk higher on CNL to workaround missing DDI clock voltage handling
v3: Squash with the CNL cdclk limits patch (DK)
v4: s/intel_min_cdclk/intel_pixel_rate_to_cdclk/ (DK)
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170830185703.8189-1-ville.syrjala@linux.intel.com
On clock recovery this function is called to find out
the max voltage swing level that we could go.
However gen 9 functions use the old buffer translation tables
to figure that out. That table is not valid for CNL
causing an invalid number of entries and an invalid selection
on the max voltage swing level.
v2: Let's use same approach that previous platforms.
v3: Actually use n_entries and avoid duplicated -1.
v4: Avoid cnl_max_level and use current style.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170831145356.15932-1-rodrigo.vivi@intel.com
Kumar, Mahesh