Commit Graph

695 Commits

Author SHA1 Message Date
Tony Lindgren 56f487c780 PM / Runtime: Update last_busy in rpm_resume
If we don't update last_busy in rpm_resume, devices can go back
to sleep immediately after resume. This happens at least in
cases where the device has been powered off and does not have
any interrupt pending until there's something in the FIFO.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-05-20 01:55:02 +02:00
Geert Uytterhoeven 3fc3a0be0d PM / clk: Fix clock error check in __pm_clk_add()
In the final iteration of commit 245bd6f6af ("PM / clock_ops: Add
pm_clk_add_clk()"), a refcount increment was added by Grygorii Strashko.
However, the accompanying IS_ERR() check operates on the wrong clock
pointer, which is always zero at this point, i.e. not an error.
This may lead to a NULL pointer dereference later, when __clk_get()
tries to dereference an error pointer.

Check the passed clock pointer instead to fix this.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes: 245bd6f6af ("PM / clock_ops: Add pm_clk_add_clk()")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-05-19 15:13:19 +02:00
Jin Qian 7f436055cb PM / wakeup: add a dummy wakeup_source to record statistics
After a wakeup_source is destroyed, we lost all information such as how
long this wakeup_source has been active. Add a dummy wakeup_source to
record such info.

Signed-off-by: Jin Qian <jinqian@android.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-05-19 02:47:26 +02:00
Rajendra Nayak 75f504004a PM / clock_ops: Provide default runtime ops to users
Most users of PM clocks do the extact same things in the runtime
suspend/resume callbacks. Provide them USE_PM_CLK_RUNTIME_OPS so
as to avoid/remove boilerplate code.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-05-12 23:55:37 +02:00
Jin Qian b6ec94520c PM / wakeup: validate wakeup source before activating it.
A rogue wakeup source not registered in wakeup_sources list is not visible
from wakeup_sources_stats_show. Check if the wakeup source is registered
properly by looking at the timer struct.

Signed-off-by: Jin Qian <jinqian@android.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-05-08 01:36:13 +02:00
Joe Perches 9f6a240e8b power: wakeup: remove use of seq_printf return value
The seq_printf return value, because it's frequently misused,
will eventually be converted to void.

See: commit 1f33c41c03 ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")

Signed-off-by: Joe Perches <joe@perches.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Len Brown <len.brown@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 16:35:24 -07:00
Rafael J. Wysocki 0fe0952b21 Merge branches 'pm-sleep' and 'pm-domains'
* pm-sleep:
  PM / watchdog: iTCO: stop watchdog during system suspend
  PM / sleep: add pm-trace support for suspending phase
  PM / sleep: add configurable delay for pm_test

* pm-domains:
  PM / domains: avoid potential oops in pm_genpd_remove_device()
  PM / domains: factor out code to get the generic PM domain from a struct device
  PM / domains: quieten down generic pm domains
  PM / Domains: Sync runtime PM status with genpd after probe
  driver core / PM: Add PM domain callbacks for device setup/cleanup
  MAINTAINERS: add entry for Generic PM domains (genpd)
2015-04-13 00:37:13 +02:00
Rafael J. Wysocki be77002101 Merge back earlier suspend/hibernate material for v4.1. 2015-04-10 12:01:59 +02:00
Russell King df6a0d6f63 PM / domains: avoid potential oops in pm_genpd_remove_device()
pm_genpd_remove_device() tries hard to validate the generic PM domain
passed to it, but the validation is not complete.

dev->pm_domain contains a struct dev_pm_domain, which is the "base
class" of generic PM domains.  Other users of dev_pm_domains include
stuff like vga_switheroo.  Hence, a device could have a generic PM
domain or a vga_switcheroo PM domain in dev->pm_domain.

We need ot be certain that the PM domain is actually valid before we
try to remove it.  We can do this easily as we have a way to get the
current validated generic PM domain for a struct device.  This must
match the generic PM domain being requested for removal.

Convert the code to use this alternative validation method instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Kevin Hilman <khilman@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-23 23:20:28 +01:00
Russell King 446d999c1c PM / domains: factor out code to get the generic PM domain from a struct device
The PM domain code contains two methods to get the generic PM domain
for a struct device.  One is dev_to_genpd() which is only safe when
we know for certain that the device has a generic PM domain attached.
The other is coded into genpd_dev_pm_detach() which ensures that the
PM domain in the struct device is a generic PM domain (and so is safer).

This commit factors out the safer version, documents it, and hides the
unsafe dev_to_genpd().

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-22 22:19:12 +01:00
Russell King 6d7d5c3266 PM / domains: quieten down generic pm domains
PM domains are rather noisy; scheduling behaviour can cause callbacks
to take longer, which causes them to spit out a warning-level message
each time a callback takes a little longer than the previous time.
There really isn't a need for this, except when debugging.

Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-22 22:19:12 +01:00
Russell King 632f7ce3f9 PM / Domains: Sync runtime PM status with genpd after probe
Buses which currently supports attaching devices to their PM domains,
will invoke the dev_pm_domain_attach() API from their ->probe()
callbacks. During the attach procedure, genpd power up the PM domain.

In those scenarios where the bus/driver don't need to access its device
during probe, it may leave it in runtime PM suspended state since
that's also the default state. In that way, no notifications through
the runtime PM callbacks will reach the PM domain during probe.

For genpd, the consequence from the above scenario means the PM domain
will remain powered. Therefore, implement the struct dev_pm_domain's
->sync() callback, which is invoked from driver core after the
bus/driver has probed the device. It allows genpd to power off the PM
domain if it's unused.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
[ Ulf: Updated patch according to updates in driver core ]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-22 22:15:11 +01:00
Zhonghui Fu 431d452af1 PM / sleep: add pm-trace support for suspending phase
Occasionally, the system can't come back up after suspend/resume
due to problems of device suspending phase. This patch make
PM_TRACE infrastructure cover device suspending phase of
suspend/resume process, and the information in RTC can tell
developers which device suspending function make system hang.

Signed-off-by: Zhonghui Fu <zhonghui.fu@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-18 15:54:27 +01:00
Rafael J. Wysocki e178e7d6df Merge branches 'pm-domains' and 'pm-cpufreq'
* pm-domains:
  PM / Domains: cleanup: rename gpd -> genpd in debugfs interface

* pm-cpufreq:
  cpufreq: ppc: Add missing #include <asm/smp.h>
2015-03-06 01:29:31 +01:00
Boris BREZILLON 432ec92b29 PM / wakeup: export pm_system_wakeup symbol
Export pm_system_wakeup function to allow irq handlers to deal with system
wakeup.

This is needed for shared IRQ lines where one of the handler is registered
with IRQF_NO_SUSPEND, while the other ones want to configure it as a wakeup
source.

In this specific case, irq core does not handle the wakeup process and
leave the decision to each irq handler.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-04 22:10:19 +01:00
Kevin Hilman 66a5ca4b2c PM / Domains: cleanup: rename gpd -> genpd in debugfs interface
To keep consisitency with the rest of the file, use 'genpd' as the
name of the 'struct generic_pm_domain' pointer instead of 'gpd'.

This is just a rename, no functional changes.

Signed-off-by: Kevin Hilman <khilman@linaro.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-04 14:18:44 +01:00
Rafael J. Wysocki c7fb90dfbe Merge branches 'pm-cpufreq', 'pm-cpuidle', 'pm-devfreq', 'pm-opp' and 'pm-tools'
* pm-cpufreq:
  cpufreq: speedstep-smi: enable interrupts when waiting

* pm-cpuidle:
  intel_idle: support additional Broadwell model

* pm-devfreq:
  PM / devfreq: event: testing the wrong variable

* pm-opp:
  PM / OPP / clk: Remove unnecessary OOM message

* pm-tools:
  tools/power turbostat: support additional Broadwell model
  tools/power turbostat: update parameters, documentation
  tools/power turbostat: Skip printing disabled package C-states
2015-02-13 21:39:06 +01:00
Quentin Lambert 59d84ca8c4 PM / OPP / clk: Remove unnecessary OOM message
This patch reduces the kernel size by removing error messages that duplicate
the normal OOM message.

A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr)

@@
identifier f,print,l;
expression e;
constant char[] c;
@@

e = \(kzalloc\|kmalloc\|devm_kzalloc\|devm_kmalloc\)(...);
if (e == NULL) {
  <+...
-  print(...,c,...);
  ... when any
(
  goto l;
|
  return ...;
)
  ...+> }

Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-12 02:00:52 +01:00
Rafael J. Wysocki f7cc61f066 Merge branch 'pm-domains'
* pm-domains:
  PM: Convert dev_pm_put_subsys_data() into a void function
  PM: Update function header for dev_pm_get_subsys_data()
  PM / Domains: Handle errors from genpd's ->attach_dev() callback
  PM / Domains: Re-order initialization of generic_pm_domain_data
  PM / Domains: Free pm_subsys_data in error path in __pm_genpd_add_device()
  PM / Domains: Eliminate the mutex for the generic_pm_domain_data
  PM / Domains: Don't check for an existing device when adding a new
  PM / Domains: Don't allow an existing generic_pm_domain_data
  PM / Domains: Remove reference counting for the generic_pm_domain_data
  PM / Domains: Rename __pm_genpd_alloc|free_dev_data()
  PM / Domains: Remove pm_genpd_dev_need_restore() API
2015-02-10 16:09:44 +01:00
Rafael J. Wysocki 740b68ea3a Merge branches 'pm-qos', 'pm-opp' and 'pm-devfreq'
* pm-qos:
  PM / QoS: Use lockdep asserts to find missing hold of power.lock
  PM / QoS: Add debugfs support to view the list of constraints

* pm-opp:
  PM / OPP: Assert RCU lock in exported functions
  PM / OPP: Update kernel documentation
  PM / OPP: Ensure consistent naming of static functions
  PM / OPP: export dev_pm_opp_get_notifier

* pm-devfreq:
  PM / devfreq: event: Add documentation for exynos-ppmu devfreq-event driver
  devfreq: Fix build break of devfreq-event class
  PM / devfreq: event: Add devfreq_event class
  PM / devfreq: tegra: add devfreq driver for Tegra Activity Monitor
2015-02-10 16:09:34 +01:00
Ulf Hansson 1e95e3b2da PM: Convert dev_pm_put_subsys_data() into a void function
Clients using the dev_pm_put_subsys_data() API isn't interested of a
return value. They care only of decreasing a reference to the device's
pm_subsys_data. So, let's convert the API to a void function, which
anyway seems like reasonable thing to do.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-03 22:59:25 +01:00
Ulf Hansson 766bb53c01 PM: Update function header for dev_pm_get_subsys_data()
The commit "PM: Make dev_pm_get_subsys_data() always return 0 on success"
changed the return value from dev_pm_get_subsys_data(). Let's update the
comment in the function header to reflect this change as well.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-03 22:59:25 +01:00
Ulf Hansson b472c2faf4 PM / Domains: Handle errors from genpd's ->attach_dev() callback
The optional genpd's ->attach_dev() callback is invoked from
__pm_genpd_add_device(). Let's add error handling from the response
from this callback and propagate the error code.

When __pm_genpd_add_device() is invoked through the generic OF-based PM
domain look-up path, the device is being probed. Returning an error
will mean the device won't be attached to its PM domain. Errors of
-EPROBE_DEFER get special treatment and is propagated to the driver
core.

Therefore this change also enables the ->attach_dev() callback to
be able to request for a deferred probe sequence.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-03 22:56:54 +01:00
Ulf Hansson f104e1e5ef PM / Domains: Re-order initialization of generic_pm_domain_data
Move the initialization of the struct generic_pm_domain_data into
genpd_alloc_dev_data(), including the assignment of the device's
->pm_domain() callback. Make corresponding changes to
genpd_free_dev_data().

These changes will make the related code more readable. It will also
decrease the critical regions for where genpd's mutex is being held and
for where the device's power related spinlock is being held.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-03 22:56:54 +01:00
Ulf Hansson 3e235685de PM / Domains: Free pm_subsys_data in error path in __pm_genpd_add_device()
The error path in __pm_genpd_add_device() didn't decrease the reference
to the struct pm_subsys_data.

Let's move the calls to dev_pm_get|put_subsys_data() into
genpd_alloc|free_dev_data() to fix this issue and thus prevent a
potential memory leakage.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-03 22:56:54 +01:00
Ulf Hansson c0356db7d1 PM / Domains: Eliminate the mutex for the generic_pm_domain_data
While adding devices to their PM domains, dev_pm_qos_add_notifier() was
invoked while allocating the generic_pm_domain_data for the device.

Since the generic_pm_domain_data's device pointer will be assigned
after allocation, the ->genpd_dev_pm_qos_notifier() callback could be
called prior having a valid pointer to the device. Similar scenario
existed while removing a device from a genpd.

To cope with these scenarios a mutex was used to protect the pointer to
the device.

By re-order the sequence for when dev_pm_qos_add|remove_notifier() are
invoked, we make sure the ->genpd_dev_pm_qos_notifier() callback are
always called with a valid device pointer available.

In this way, we eliminate the need for protecting the pointer and thus
we can remove the mutex from the struct generic_pm_domain_data.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-03 22:56:53 +01:00
Ulf Hansson e07b45cb98 PM / Domains: Don't check for an existing device when adding a new
When adding a device to a genpd, we no longer need to walk genpd's list
of existing devices to verify it hasn't already been added.

Instead we can now rely on the verification of not allowing existing
generic_pm_domain_data for a device, since that has the same meaning.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-03 22:56:53 +01:00
Ulf Hansson 14b5306488 PM / Domains: Don't allow an existing generic_pm_domain_data
When adding a device to a genpd, a struct generic_pm_domain_data is
allocated per device.

Verify that there are no existing generic_pm_domain_data for the device
we are about to add, since that tells us it has already been added to a
genpd.

When genpd supported PM domain device callbacks, this was a valid
scenario. Now it isn't so let's return an error code.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-03 22:56:53 +01:00
Ulf Hansson c1dbe2fbb3 PM / Domains: Remove reference counting for the generic_pm_domain_data
The reference counting was needed when genpd supported PM domain device
callbacks. Since this option has been removed, let's also remove the
reference counting of the struct generic_pm_domain_data.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-03 22:56:52 +01:00
Ulf Hansson 49d400c74a PM / Domains: Rename __pm_genpd_alloc|free_dev_data()
In a step to get consistent names of functions in genpd, rename
the internal __pm_genpd_alloc|free_dev_data() into
gendp_alloc|free_dev_data().

As discussed on the linux-pm list, let's move towards the following
name rules:

Internal functions:
genpd_*
_genpd_*
__genpd_*

External functions:
pm_genpd_*
_pm_genpd_*
__pm_genpd_*

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-03 22:56:52 +01:00
Ulf Hansson 382548a62a PM / Domains: Remove pm_genpd_dev_need_restore() API
There are currently no users of this API, let's remove it.

Additionally, if such feature would be needed future wise, a better
option is likely use pm_runtime_set_active|suspended() in some form.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23 23:13:11 +01:00
Krzysztof Kozlowski 04bf1c7f76 PM / OPP: Assert RCU lock in exported functions
Add lockdep asserts for holding the RCU lock when calling
dev_pm_opp_get_freq() and dev_pm_opp_get_voltage() to aid in detecting
RCU misuses.

These are called often after dev_pm_opp_find_freq_ceil/exact() which
already asserts for RCU lock. However one could make an error by
releasing lock too early - just after dev_pm_opp_find_freq_ceil().

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23 22:32:38 +01:00
Krzysztof Kozlowski f90b8ad83a PM / QoS: Use lockdep asserts to find missing hold of power.lock
Add lockdep asserts for holding the dev->power.lock to non-static
functions which require this. They could be used outside of the file so
asserts may help in detecting locking misuse.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23 22:31:08 +01:00
Nishanth Menon 984f16c849 PM / OPP: Update kernel documentation
kernel doc has gotten bit-rotted over time. Re-sync with Locking and
Return information. document all functions properly and ensure that
./scripts/kernel-doc -v  ./drivers/base/power/opp.c >/dev/null returns
no errors

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23 22:28:25 +01:00
Nishanth Menon 327854c871 PM / OPP: Ensure consistent naming of static functions
All exported functions use dev_pm_* prefix and all static functions
are now standardized with _ prefix. This is better than having to deal
with multiple function naming styles within the same file.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23 22:28:24 +01:00
Nishanth Menon 4679ec3727 PM / OPP: export dev_pm_opp_get_notifier
Allows user drivers such as devfreq to be modules.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23 22:28:24 +01:00
Rafael J. Wysocki 4f2f277789 Merge branches 'pm-domains', 'powercap' and 'pm-tools'
* pm-domains:
  PM / Domains: Export of_genpd_get_from_provider function

* powercap:
  powercap / RAPL: add IDs for future Xeon CPUs

* pm-tools:
  tools / cpupower: Fix no idle state information return value
  tools / cpupower: Correctly detect if running as root
2014-12-29 21:24:00 +01:00
Rafael J. Wysocki e0288b0e9e Merge branch 'pm-opp'
* pm-opp:
  PM / OPP: take RCU lock in dev_pm_opp_get_opp_count
  PM / OPP: fix warning in of_free_opp_table()
  PM / OPP: add some lockdep annotations
2014-12-29 21:23:13 +01:00
Rafael J. Wysocki 2ec1c17cad Merge branches 'pm-opp', 'pm-cpufreq' and 'pm-tools'
* pm-opp:
  PM / OPP: do error handling at the bottom of dev_pm_opp_add_dynamic()
  PM / OPP: handle allocation of device_opp in a separate routine
  PM / OPP: reuse find_device_opp() instead of duplicating code
  PM / OPP: Staticize __dev_pm_opp_remove()
  PM / OPP: replace kfree with kfree_rcu while freeing 'struct device_opp'

* pm-cpufreq:
  MAINTAINERS: add entry for intel_pstate
  intel_pstate: Add a few comments
  intel_pstate: add kernel parameter to force loading

* pm-tools:
  Revert "tools: cpupower: fix return checks for sysfs_get_idlestate_count()"
2014-12-18 18:44:53 +01:00
Dmitry Torokhov b4718c02f4 PM / OPP: take RCU lock in dev_pm_opp_get_opp_count
A lot of callers are missing the fact that dev_pm_opp_get_opp_count
needs to be called under RCU lock. Given that RCU locks can safely be
nested, instead of providing *_locked() API, let's take RCU lock inside
dev_pm_opp_get_opp_count() and leave callers as is.

Signed-off-by: Dmitry Torokhov <dtor@chromium.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-18 01:42:49 +01:00
Dmitry Torokhov 0fe30da2cb PM / OPP: fix warning in of_free_opp_table()
Not having OPP defined for a device is not a crime, we should not splat
warning in this case. Also, it seems that we are ready to accept invalid
dev (find_device_opp will return ERR_PTR(-EINVAL) then) so let's not
crash in dev_name() in such case.

Signed-off-by: Dmitry Torokhov <dtor@chromium.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-18 01:42:49 +01:00
Dmitry Torokhov b02ded246d PM / OPP: add some lockdep annotations
Certain OPP APIs need to be called under RCU lock; let's add a few
rcu_lockdep_assert() calls to warn about potential misuse.

Signed-off-by: Dmitry Torokhov <dtor@chromium.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-18 01:42:49 +01:00
Amit Daniel Kachhap 7496fcbe8a PM / Domains: Export of_genpd_get_from_provider function
This function looks up a PM domain form the provider. This will be
useful to add parent/child domain relationship from the SoC specific
code. The caller of the function must make sure that PM domain provider
is already registered.

Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-17 02:33:34 +01:00
Viresh Kumar 6ce4184d03 PM / OPP: do error handling at the bottom of dev_pm_opp_add_dynamic()
This makes it less error prone and moves common resource deallocation at a
single place.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-10 22:18:34 +01:00
Viresh Kumar 07cce74a7b PM / OPP: handle allocation of device_opp in a separate routine
Get the 'device_opp' allocation code into a separate routine to keep only the
necessary part in dev_pm_opp_add_dynamic().

Also do s/sizeof(struct device_opp)/sizeof(*dev_opp) and remove the print
message on kzalloc() failure as checkpatch warns for that.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-10 22:18:34 +01:00
Viresh Kumar 29df0ee1b1 PM / OPP: reuse find_device_opp() instead of duplicating code
Reuse find_device_opp() in opp_set_availability() instead of duplicating code.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-10 22:18:34 +01:00
Viresh Kumar 86453b473b PM / OPP: Staticize __dev_pm_opp_remove()
Its a local routine and need not be accessible outside of opp.c.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-10 22:18:34 +01:00
Viresh Kumar 1c6a662f89 PM / OPP: replace kfree with kfree_rcu while freeing 'struct device_opp'
Somehow one of the instance of freeing resources failed to use kfree_rcu() and
used kfree() instead. This might cause problems as the node might be referenced
by readers under rcu locks and we must wait for the rcu grace period as well.

While we are at it, also update comment over 'struct device_opp' to mention why
we are waiting for both rcu and srcu grace periods.

Fixes: 129eec55df (PM / OPP Introduce APIs to remove OPPs)
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-10 22:18:33 +01:00
Rafael J. Wysocki dec6c26b6e Merge branch 'pm-opp'
* pm-opp:
  PM / OPP: remove double calls to find_device_opp()
  PM / OPP: set new_opp->dev_opp to a valid dev_opp
2014-12-10 22:17:25 +01:00
Viresh Kumar 2a6127d037 PM / OPP: remove double calls to find_device_opp()
By mistake we called find_device_opp() twice in of_free_opp_table(), fix it.

Generated diff doesn't show the problem well and so here is the code snippet:

void of_free_opp_table(struct device *dev)
{
	struct device_opp *dev_opp = find_device_opp(dev);
	struct dev_pm_opp *opp, *tmp;

	/* Check for existing list for 'dev' */
	dev_opp = find_device_opp(dev);

	...
}

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-10 02:39:12 +01:00
Viresh Kumar 7284a00f17 PM / OPP: set new_opp->dev_opp to a valid dev_opp
We find/allocate dev_opp after using its value to fill new_opp->dev_opp right
now. Move this to a later point where dev_opp is valid.

Fixes: a7470db6fe (PM / OPP don't match for existing OPPs when list is empty)
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-10 02:32:51 +01:00
Rafael J. Wysocki e3d857e1ae Merge branch 'pm-runtime'
* pm-runtime: (25 commits)
  i2c-omap / PM: Drop CONFIG_PM_RUNTIME from i2c-omap.c
  dmaengine / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  drivers: sh / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  e1000e / igb / PM: Eliminate CONFIG_PM_RUNTIME
  MMC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  MFD / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  misc / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  media / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  input / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  iio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  hsi / OMAP / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  i2c-hid / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  drm / exynos / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  gpio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  hwrandom / exynos / PM: Use CONFIG_PM in #ifdef
  block / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  USB / PM: Drop CONFIG_PM_RUNTIME from the USB core
  PM: Merge the SET*_RUNTIME_PM_OPS() macros
  PM / Kconfig: Do not select PM directly from Kconfig files
  PCI / PM: Drop CONFIG_PM_RUNTIME from the PCI core
  ...
2014-12-08 20:00:44 +01:00
Rafael J. Wysocki 389cbf36e5 Merge branches 'pm-domains', 'pm-sleep' and 'pm-tools'
* pm-domains:
  ARM: shmobile: Convert to genpd flags for PM clocks for R-mobile
  ARM: shmobile: Convert to genpd flags for PM clocks for r8a7779
  PM / Domains: Initial PM clock support for genpd
  PM / Domains: Power on the PM domain right after attach completes
  PM / Domains: Move struct pm_domain_data to pm_domain.h
  PM / Domains: Extract code to power off/on a PM domain
  PM / Domains: Make genpd parameter of pm_genpd_present() const

* pm-sleep:
  PM / hibernate: Deletion of an unnecessary check before the function call "vfree"
  PM / Hibernate: Migrate to ktime_t

* pm-tools:
  tools: cpupower: fix return checks for sysfs_get_idlestate_count()
2014-12-08 20:00:02 +01:00
Rafael J. Wysocki 5aee40e4f7 Merge branches 'powercap', 'pm-clk', 'pm-config' and 'pm-opp'
* powercap:
  powercap / RAPL: fix build dependency on iosf_mbi
  powercap / RAPL: add new model ids
  powercap / RAPL: handle atom and core differences
  powercap / RAPL: abstract per cpu type functions

* pm-clk:
  PM / clock_ops: make __pm_clk_enable more generic
  PM / clock_ops: Add pm_clk_add_clk()

* pm-config:
  PM: Kconfig: fix unmet dependency for CPU_PM

* pm-opp:
  PM / OPP replace kfree_rcu() with call_srcu() in opp_set_availability()
  PM / OPP Introduce APIs to remove OPPs
  PM / OPP mark OPPs as 'static' or 'dynamic'
  PM / OPP don't match for existing OPPs when list is empty
  PM / OPP rename 'head' as 'rcu_head' or 'srcu_head' based on its type
2014-12-08 19:57:41 +01:00
Rafael J. Wysocki d30d819dc8 PM: Drop CONFIG_PM_RUNTIME from the driver core
After commit b2b49ccbdd (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is
selected) PM_RUNTIME is always set if PM is set, so quite a few
depend on CONFIG_PM or even may be dropped entirely in some cases.

Replace CONFIG_PM_RUNTIME with CONFIG_PM in the PM core code.

Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-04 00:46:58 +01:00
Ulf Hansson c11f6f5bb1 PM / Domains: Initial PM clock support for genpd
It's quite common for PM domains to use PM clocks. Typically from SOC
specific code, the per device PM clock list is created and
pm_clk_suspend|resume() are invoked to handle clock gating/ungating.

A step towards consolidation is to integrate PM clock support into
genpd, which is what this patch does.

In this initial step, the calls to the pm_clk_suspend|resume() are
handled within genpd, but the per device PM clock list still needs to
be created from SOC specific code. It seems reasonable to have gendp to
handle that as well, but that left to future patches to address.

It's not every users of genpd that are keen on using PM clocks, thus we
need to provide this a configuration option for genpd. Therefore let's
add flag field in the genpd struct to keep this information and define
a new GENDP_FLAG_PM_CLK bit for it.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-04 00:44:44 +01:00
Viresh Kumar b4037aaa58 PM / OPP replace kfree_rcu() with call_srcu() in opp_set_availability()
This existed before we introduced call_srcu() in opp layer to synchronize with
srcu_notifier_call_chain() while removing OPPs. And is a potential bug which
wasn't noticed earlier.

Let fix it as well by using the right API to free OPP.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-29 23:53:20 +01:00
Viresh Kumar 129eec55df PM / OPP Introduce APIs to remove OPPs
OPPs are created statically (from DT) or dynamically. Currently we don't free
OPPs that are created statically, when the module unloads. And so if the module
is inserted back again, we get warning for duplicate OPPs as the same were
already present.

Also, there might be a need to remove dynamic OPPs in future and so API for that
is also added.

This patch adds helper APIs to remove/free existing static and dynamic OPPs.

Because the OPPs are used both under RCU and SRCU, we have to wait for grace
period of both. And so are using kfree_rcu() from within call_srcu().

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-29 23:53:20 +01:00
Viresh Kumar 38393409da PM / OPP mark OPPs as 'static' or 'dynamic'
Static OPPs are the ones created from Device Tree entries and dynamic are the
ones created at runtime by calling dev_pm_opp_add().

There is a need to distinguish them as we need to free static OPPs from cpufreq
drivers when they are removed.

So, add another field 'dynamic' in 'struct dev_pm_opp' to keep this information.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-29 23:53:20 +01:00
Viresh Kumar a7470db6fe PM / OPP don't match for existing OPPs when list is empty
OPP list is guaranteed to be empty when 'dev_opp' is created. And so we don't
need to run the comparison loop with existing OPPs.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-29 23:53:20 +01:00
Viresh Kumar cd1a068a52 PM / OPP rename 'head' as 'rcu_head' or 'srcu_head' based on its type
Both 'struct dev_pm_opp' and 'struct device_opp' have member with name 'head'
but with different types. This leads to confusion while reading the code.

Name them 'rcu_head' and 'srcu_head'.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-29 23:53:20 +01:00
Rafael J. Wysocki ef9cc993cd Merge branch 'pm-clk' into pm-runtime 2014-11-29 01:18:27 +01:00
Rafael J. Wysocki af261127e9 Merge back earlier 'pm-runtime' material for 3.19-rc1. 2014-11-27 01:37:53 +01:00
Ulf Hansson 2ed127697e PM / Domains: Power on the PM domain right after attach completes
Vast amount of platform drivers which enables runtime PM, don't invoke
a pm_runtime_get_sync() while probing their devices.

Instead, once they have turned on their PM resourses during ->probe()
and are ready to handle I/O, these invokes pm_runtime_set_active() to
synchronize its state towards the runtime PM core.

From the runtime PM point of view this behavior is perfectly acceptable,
but we encounter probe failures if their corresponding devices resides
in the generic PM domain. The issues are observed for those devices,
which requires its PM domain to stay powered during ->probe() since
that's not being controlled.

While using the generic OF-based PM domain look-up, a device's PM
domain will be attached during the probe sequence. For this path, let's
fix the probe failures, by simply power on the PM domain right after
when it's been attached to the device.

The generic PM domain stays powered until all of its devices becomes
runtime PM enabled and runtime PM suspended.

The old SOCs which makes use of the generic PM domain but don't use the
generic OF-based PM domain look-up, will not be affected from this
change.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-20 21:38:50 +01:00
Rafael J. Wysocki 2e015da0d5 Merge back 'pm-domains' material for 3.19-rc1. 2014-11-18 01:21:39 +01:00
Geert Uytterhoeven c8f0ea4516 PM / Domains: Extract code to power off/on a PM domain
PM domains are powered on/off from various places. Some callers do
latency measurements, others don't. Consolidate using two helper
functions, which always measure the latencies, and update the stored
latencies when needed.

Other minor changes:
  - Use pr_warn() instead of pr_warning(),
  - There's no need to check genpd->name, %s handles NULL pointers fine,
  - Make the warning format strings identical, to save memory.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-14 00:07:31 +01:00
Geert Uytterhoeven 895b31f3b6 PM / Domains: Make genpd parameter of pm_genpd_present() const
The PM domain pointed to by the genpd parameter is never modified.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Kevin Hilman <khilman@linaro.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-14 00:04:36 +01:00
Ulf Hansson 67732cd343 PM / Domains: Fix initial default state of the need_restore flag
The initial state of the device's need_restore flag should'nt depend on
the current state of the PM domain. For example it should be perfectly
valid to attach an inactive device to a powered PM domain.

The pm_genpd_dev_need_restore() API allow us to update the need_restore
flag to somewhat cope with such scenarios. Typically that should have
been done from drivers/buses ->probe() since it's those that put the
requirements on the value of the need_restore flag.

Until recently, the Exynos SOCs were the only user of the
pm_genpd_dev_need_restore() API, though invoking it from a centralized
location while adding devices to their PM domains.

Due to that Exynos now have swithed to the generic OF-based PM domain
look-up, it's no longer possible to invoke the API from a centralized
location. The reason is because devices are now added to their PM
domains during the probe sequence.

Commit "ARM: exynos: Move to generic PM domain DT bindings"
did the switch for Exynos to the generic OF-based PM domain look-up,
but it also removed the call to pm_genpd_dev_need_restore(). This
caused a regression for some of the Exynos drivers.

To handle things more properly in the generic PM domain, let's change
the default initial value of the need_restore flag to reflect that the
state is unknown. As soon as some of the runtime PM callbacks gets
invoked, update the initial value accordingly.

Moreover, since the generic PM domain is verifying that all devices
are both runtime PM enabled and suspended, using pm_runtime_suspended()
while pm_genpd_poweroff() is invoked from the scheduled work, we can be
sure of that the PM domain won't be powering off while having active
devices.

Do note that, the generic PM domain can still only know about active
devices which has been activated through invoking its runtime PM resume
callback. In other words, buses/drivers using pm_runtime_set_active()
during ->probe() will still suffer from a race condition, potentially
probing a device without having its PM domain being powered. That issue
will have to be solved using a different approach.

This a log from the boot regression for Exynos5, which is being fixed in
this patch.

------------[ cut here ]------------
WARNING: CPU: 0 PID: 308 at ../drivers/clk/clk.c:851 clk_disable+0x24/0x30()
Modules linked in:
CPU: 0 PID: 308 Comm: kworker/0:1 Not tainted 3.18.0-rc3-00569-gbd9449f-dirty #10
Workqueue: pm pm_runtime_work
[<c0013c64>] (unwind_backtrace) from [<c0010dec>] (show_stack+0x10/0x14)
[<c0010dec>] (show_stack) from [<c03ee4cc>] (dump_stack+0x70/0xbc)
[<c03ee4cc>] (dump_stack) from [<c0020d34>] (warn_slowpath_common+0x64/0x88)
[<c0020d34>] (warn_slowpath_common) from [<c0020d74>] (warn_slowpath_null+0x1c/0x24)
[<c0020d74>] (warn_slowpath_null) from [<c03107b0>] (clk_disable+0x24/0x30)
[<c03107b0>] (clk_disable) from [<c02cc834>] (gsc_runtime_suspend+0x128/0x160)
[<c02cc834>] (gsc_runtime_suspend) from [<c0249024>] (pm_generic_runtime_suspend+0x2c/0x38)
[<c0249024>] (pm_generic_runtime_suspend) from [<c024f44c>] (pm_genpd_default_save_state+0x2c/0x8c)
[<c024f44c>] (pm_genpd_default_save_state) from [<c024ff2c>] (pm_genpd_poweroff+0x224/0x3ec)
[<c024ff2c>] (pm_genpd_poweroff) from [<c02501b4>] (pm_genpd_runtime_suspend+0x9c/0xcc)
[<c02501b4>] (pm_genpd_runtime_suspend) from [<c024a4f8>] (__rpm_callback+0x2c/0x60)
[<c024a4f8>] (__rpm_callback) from [<c024a54c>] (rpm_callback+0x20/0x74)
[<c024a54c>] (rpm_callback) from [<c024a930>] (rpm_suspend+0xd4/0x43c)
[<c024a930>] (rpm_suspend) from [<c024bbcc>] (pm_runtime_work+0x80/0x90)
[<c024bbcc>] (pm_runtime_work) from [<c0032a9c>] (process_one_work+0x12c/0x314)
[<c0032a9c>] (process_one_work) from [<c0032cf4>] (worker_thread+0x3c/0x4b0)
[<c0032cf4>] (worker_thread) from [<c003747c>] (kthread+0xcc/0xe8)
[<c003747c>] (kthread) from [<c000e738>] (ret_from_fork+0x14/0x3c)
---[ end trace 40cd58bcd6988f12 ]---

Fixes: a4a8c2c496 (ARM: exynos: Move to generic PM domain DT bindings)
Reported-and-tested0by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-11 22:28:44 +01:00
Ulf Hansson c16561e8df PM / Domains: Change prototype for the attach and detach callbacks
Convert the prototypes to return an int in order to support error
handling in these callbacks.

Also, as suggested by Dmitry Torokhov, pass the domain pointer for use
inside the callbacks, and so that they match the existing
power_on/power_off callbacks which currently take the domain pointer.

Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[ khilman: added domain as parameter to callbacks, as suggested by Dmitry ]
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-08 02:23:21 +01:00
Strashko, Grygorii 471f7707b6 PM / clock_ops: make __pm_clk_enable more generic
Now there are two places in code which do the same things,
so allow __pm_clk_enable() to accept pointer on pm_clock_entry
structure as second parameter instead of pointer on clock and
remove duplicated code.

Also, updated function intended to be used by following patch.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-07 01:47:48 +01:00
Geert Uytterhoeven 245bd6f6af PM / clock_ops: Add pm_clk_add_clk()
The existing pm_clk_add() allows to pass a clock by con_id. However,
when referring to a specific clock from DT, no con_id is available.

Add pm_clk_add_clk(), which allows to specify the struct clk * directly.
The will will increment refcount on clock pointer, so the caller has
to use clk_put() on clock pointer when done.

Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-07 01:46:51 +01:00
Andrzej Hajda dbcd2d7253 PM / Runtime: Rework RPM get callback routines
PM uses three separate functions to fetch RPM callbacks.
These functions uses quite complicated macro in their body.
The patch replaces these routines with one small macro and
one helper function.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-06 00:49:57 +01:00
Imre Deak 246ef76674 PM / Sleep: fix async suspend_late/freeze_late error handling
If an asynchronous suspend_late or freeze_late callback fails
during the SUSPEND, FREEZE or QUIESCE phases, we don't propagate the
corresponding error correctly, in effect ignoring the error and
continuing the suspend-to-ram/hibernation. During suspend-to-ram this
could leave some devices without a valid saved context, leading to a
failure to reinitialize them during resume. During hibernation this
could leave some devices active interfeering with the creation /
restoration of the hibernation image. Also this could leave the
corresponding devices without a valid saved context and failure to
reinitialize them during resume.

Fixes: de377b3972 (PM / sleep: Asynchronous threads for suspend_late)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Cc: 3.15+ <stable@vger.kernel.org> # 3.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-27 18:42:26 +01:00
Rafael J. Wysocki 9f1a053296 Merge branch 'pm-clk'
* pm-clk:
  PM / clk: Fix crash in clocks management code if !CONFIG_PM_RUNTIME
2014-10-07 01:18:58 +02:00
Rafael J. Wysocki 49a09c9ab0 Merge branch 'pm-domains'
* pm-domains: (32 commits)
  PM / Domains: Rename cpu_data to cpuidle_data
  PM / Domains: Move dev_pm_domain_attach|detach() to pm_domain.h
  PM / Domains: Remove legacy API for adding devices through DT
  PM / Domains: Add genpd attach/detach callbacks
  PM / Domains: add debugfs listing of struct generic_pm_domain-s
  ACPI / PM: Convert acpi_dev_pm_detach() into a static function
  ARM: exynos: Move to generic PM domain DT bindings
  amba: Add support for attach/detach of PM domains
  spi: core: Convert to dev_pm_domain_attach|detach()
  mmc: sdio: Convert to dev_pm_domain_attach|detach()
  i2c: core: Convert to dev_pm_domain_attach|detach()
  drivercore / platform: Convert to dev_pm_domain_attach|detach()
  PM / Domains: Add APIs to attach/detach a PM domain for a device
  PM / Domains: Add generic OF-based PM domain look-up
  ACPI / PM: Assign the ->detach() callback when attaching the PM domain
  PM / Domains: Add a detach callback to the struct dev_pm_domain
  PM / domains: Spelling s/domian/domain/
  PM / domains: Keep declaration of dev_power_governors together
  PM / domains: Remove default_stop_ok() API
  drivers: sh: Leave disabling of unused PM domains to genpd
  ...
2014-10-07 01:18:12 +02:00
Geert Uytterhoeven a968bed78b PM / clk: Fix crash in clocks management code if !CONFIG_PM_RUNTIME
Unlike the clocks management code for runtime PM, the code used for
system suspend does not check the pm_clock_entry.status field.
If pm_clk_acquire() failed, ce->status will be PCE_STATUS_ERROR, and
ce->clk will be a negative error code (e.g. 0xfffffffe = -2 = -ENOENT).

Depending on the clock implementation, suspend or resume may crash with:

    Unable to handle kernel NULL pointer dereference at virtual address 00000026

(CCF clk_disable() has an IS_ERR_OR_NULL() check, while CCF clk_enable()
 only has a NULL check; pre-CCF implementations may behave differently)

While just checking for PCE_STATUS_ERROR would be sufficient, it doesn't
hurt to use the same state machine as is done for runtime PM, as this
makes the two versions more similar, and eligible for a future
consolidation.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-03 15:51:39 +02:00
Ulf Hansson f39cb1797e PM / Domains: Rename cpu_data to cpuidle_data
The "cpu_data" are defined for some archs and thus conflicting with the
"cpu_data" member in the struct gpd_cpu_data. This causes a compiler
error for those archs.

Let's fix it by rename the member to cpuidle_data. In this context it
also seems appropriate to rename the struct to gpd_cpuidle_data to
better reflect its use.

Fixes: f48c767ce8 (PM / Domains: Move dev_pm_domain_attach|detach() to pm_domain.h)
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-03 15:43:14 +02:00
Rafael J. Wysocki 2a8a8ce651 PM / sleep: Export dpm_suspend_late/noirq() and dpm_resume_early/noirq()
Subsequent change sets will add platform-related operations between
dpm_suspend_late() and dpm_suspend_noirq() as well as between
dpm_resume_noirq() and dpm_resume_early() in suspend_enter(), so
export these functions for suspend_enter() to be able to call them
separately and split the invocations of dpm_suspend_end() and
dpm_resume_start() in there accordingly.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-30 21:05:59 +02:00
Rafael J. Wysocki e4cb0c9e92 Merge branch 'pm-genirq' into acpi-pm 2014-09-30 20:46:13 +02:00
Ulf Hansson 263c589bae PM / Domains: Remove legacy API for adding devices through DT
There are no active clients of the legacy API and we now also have a
better way to handle genpd DT support. So let's remove the legacy API.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-25 22:13:42 +02:00
Geert Uytterhoeven d79b6fe17a PM / Domains: Add genpd attach/detach callbacks
While a PM domain can enable PM runtime management of its devices' module
clocks by setting

	genpd->dev_ops.stop = pm_clk_suspend;
	genpd->dev_ops.start = pm_clk_resume;

this also requires registering the clocks with the pm_clk subsystem.
In the legacy case, this is handled by the platform code, after
attaching the device to its PM domain.

When the devices are instantiated from DT, devices are attached to their
PM domains by generic code, leaving no method for the platform-specific
PM domain code to register their clocks.

Add two callbacks, allowing a PM domain to perform platform-specific
tasks when a device is attached to or detached from a PM domain.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-25 22:08:41 +02:00
Maciej Matraszek 2bd5306a87 PM / Domains: add debugfs listing of struct generic_pm_domain-s
Add /sys/kernel/debug/pm_genpd/pm_genpd_summary file, which
lists power domains in the system, their statuses and attached devices,
resembling /sys/kernel/debug/clk/clk_summary.

Currently it is impossible to inspect (from userland) whether
a power domain is on or off. And, if it is on, which device blocks it
from powering down. This change allows developers working on
embedded devices power efficiency to list all necessary information
about generic power domains in one place.

The content of pm_genpd/pm_genpd_summary file is generated by iterating
over all generic power domain in the system, and, for each,
over registered devices and over the subdomains, if present.

Example output:
$ cat  /sys/kernel/debug/pm_genpd/pm_genpd_summary
    domain                      status         slaves
           /device                                      runtime status
----------------------------------------------------------------------
a4su                            off
a3sg                            off
a3sm                            on
a3sp                            on
    /devices/e6600000.pwm                               suspended
    /devices/e6c50000.serial                            active
    /devices/e6850000.sd                                suspended
    /devices/e6bd0000.mmc                               active
a4s                             on               a3sp, a3sm, a3sg
    /devices/e6900000.irqpin                            unsupported
    /devices/e6900004.irqpin                            unsupported
    /devices/e6900008.irqpin                            unsupported
    /devices/e690000c.irqpin                            unsupported
    /devices/e9a00000.ethernet                          active
a3rv                            off
a4r                             off              a3rv
    /devices/fff20000.i2c                               suspended
a4lc                            off
c5                              on               a4lc, a4r, a4s, a4su
    /devices/e6050000.pfc                               unsupported
    /devices/e6138000.timer                             active

To enable this feature, compile the kernel with debugfs
and CONFIG_PM_ADVANCED_DEBUG enabled.

Signed-off-by: Maciej Matraszek <m.matraszek@samsung.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-23 23:16:58 +02:00
Ulf Hansson 46420dd73b PM / Domains: Add APIs to attach/detach a PM domain for a device
To maintain scalability let's add common methods to attach and detach
a PM domain for a device, dev_pm_domain_attach|detach().

Typically dev_pm_domain_attach() shall be invoked from subsystem level
code at the probe phase to try to attach a device to its PM domain.
The reversed actions may be done a the remove phase and then by
invoking dev_pm_domain_detach().

When attachment succeeds, the attach function should assign its
corresponding detach function to a new ->detach() callback added in the
struct dev_pm_domain.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-22 15:57:40 +02:00
Tomasz Figa aa42240ab2 PM / Domains: Add generic OF-based PM domain look-up
This patch introduces generic code to perform PM domain look-up using
device tree and automatically bind devices to their PM domains.

Generic device tree bindings are introduced to specify PM domains of
devices in their device tree nodes.

Backwards compatibility with legacy Samsung-specific PM domain bindings
is provided, but for now the new code is not compiled when
CONFIG_ARCH_EXYNOS is selected to avoid collision with legacy code.
This will change as soon as the Exynos PM domain code gets converted to
use the generic framework in further patch.

This patch was originally submitted by Tomasz Figa when he was employed
by Samsung.

Link: http://marc.info/?l=linux-pm&m=139955349702152&w=2
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-22 15:57:40 +02:00
Geert Uytterhoeven 12e10bb60b PM / domains: Spelling s/domian/domain/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-22 14:50:56 +02:00
Ulf Hansson 0f574d4c3a PM / domains: Remove default_stop_ok() API
There are currently no need to export default_stop_ok() as an API,
instead let's keep it local to the PM domain governor.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-09 00:46:13 +02:00
Ulf Hansson 2fe71dcdfd PM / domains: Add late_initcall to disable unused PM domains
As default behavior let genpd at late init try to disable the unused
PM domains.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-09 00:46:12 +02:00
Ulf Hansson d971f0b0ea PM / domains: Remove genpd_queue_power_off_work() API
There are no active users of this API. Let's remove it and if future
needs shows up we could consider to have a get/put API instead.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-09 00:46:12 +02:00
Ulf Hansson d47e6464ae PM / domains: Remove pm_genpd_syscore_switch() API
The pm_genpd_syscore_poweroff() API and pm_genpd_syscore_poweron() API
makes the pm_genpd_syscore_switch() API redundant.

Moreover, since there are no active users, let's just remove it.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-09 00:46:12 +02:00
Ulf Hansson 784b0d3d8b PM / domains: Remove redundant check for CONFIG_PM
CONFIG_PM_GENERIC_DOMAINS depends on CONFIG_PM, thus there are no need
to check explicity for it.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-09 00:46:12 +02:00
Ulf Hansson c5d79ec2a5 PM / domains: Remove dev_irq_safe from genpd config
The genpd dev_irq_safe configuration somewhat overlaps with the runtime
PM pm_runtime_irq_safe() option. Also, currently genpd don't have a
good way to deal with these device. So, until we figured out if and how
to support this in genpd, let's remove the option to configure it.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-09 00:46:11 +02:00
Ulf Hansson 1e0407ca54 PM / domains: Remove system PM callbacks from gpd_dev_ops
There no users of these callbacks, let's simplify the generic power
domain by removing them.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-09 00:46:11 +02:00
Ulf Hansson 67da6d4bf4 PM / domains: Ignore callbacks for subsys generic_pm_domain_data
In a step of simplifying the generic power domain let's move away from
using these callbacks.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-09 00:46:11 +02:00
Ulf Hansson 55e15c949f PM / domains: Remove the pm_genpd_add|remove_callbacks APIs
There are no users of these APIs. To simplify the generic power domain
let's remove them.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-09 00:46:11 +02:00
Johannes Berg 2b4f43131d PM / sysfs: avoid shadowing variables
The global variable "enabled" is shadowed in a number of
functions in this file, rename it to "_enabled" to avoid
that. For consistency, also rename "disabled" and move
them both into the #ifdef where they're needed.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-08 15:40:18 +02:00
Rafael J. Wysocki 068765ba79 PM / sleep: Mechanism for aborting system suspends unconditionally
It sometimes may be necessary to abort a system suspend in
progress or wake up the system from suspend-to-idle even if the
pm_wakeup_event()/pm_stay_awake() mechanism is not enabled.

For this purpose, introduce a new global variable pm_abort_suspend
and make pm_wakeup_pending() check its value.  Also add routines
for manipulating that variable.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-01 13:47:49 +02:00
Randy Dunlap 58c256a3a3 PM / sleep: fix kernel-doc warnings in drivers/base/power/main.c
Fix kernel-doc warnings in drivers/base/power/main.c:

Warning(..//drivers/base/power/main.c:473): No description found for parameter 'async'
Warning(..//drivers/base/power/main.c:601): No description found for parameter 'async'
Warning(..//drivers/base/power/main.c:1012): No description found for parameter 'async'
Warning(..//drivers/base/power/main.c:1151): No description found for parameter 'async'
Warning(..//drivers/base/power/main.c:1305): No description found for parameter 'info'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-29 01:32:50 +02:00
Rafael J. Wysocki d715a226b0 Merge branch 'pm-sleep'
* pm-sleep:
  PM / sleep: trace events for device PM callbacks
  PM / sleep: trace events for suspend/resume
2014-06-12 13:43:08 +02:00
Todd E Brandt e8bca479c3 PM / sleep: trace events for device PM callbacks
Adds two trace events which supply the same info that initcall_debug
provides, but via ftrace instead of dmesg. The existing initcall_debug
calls require the pm_print_times_enabled var to be set (either via
sysfs or via the kernel cmd line). The new trace events provide all the
same info as the initcall_debug prints but with less overhead, and also
with coverage of device prepare and complete device callbacks.

These events replace the device_pm_report_time event (which has been
removed). device_pm_callback_start is called first and provides the device
and callback info. device_pm_callback_end is called after with the
device name and error info. The time and pid are gathered from the trace
data headers.

Signed-off-by: Todd Brandt <todd.e.brandt@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-06-11 02:16:48 +02:00
Todd E Brandt bb3632c610 PM / sleep: trace events for suspend/resume
Adds trace events that give finer resolution into suspend/resume. These
events are graphed in the timelines generated by the analyze_suspend.py
script. They represent large areas of time consumed that are typical to
suspend and resume.

The event is triggered by calling the function "trace_suspend_resume"
with three arguments: a string (the name of the event to be displayed
in the timeline), an integer (case specific number, such as the power
state or cpu number), and a boolean (where true is used to denote the start
of the timeline event, and false to denote the end).

The suspend_resume trace event reproduces the data that the machine_suspend
trace event did, so the latter has been removed.

Signed-off-by: Todd Brandt <todd.e.brandt@intel.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-06-07 00:18:07 +02:00
Linus Torvalds 4dc4226f99 ACPI and power management updates for 3.16-rc1
- ACPICA update to upstream version 20140424.  That includes a
    number of fixes and improvements related to things like GPE
    handling, table loading, headers, memory mapping and unmapping,
    DSDT/SSDT overriding, and the Unload() operator.  The acpidump
    utility from upstream ACPICA is included too.  From Bob Moore,
    Lv Zheng, David Box, David Binderman, and Colin Ian King.
 
  - Fixes and cleanups related to ACPI video and backlight interfaces
    from Hans de Goede.  That includes blacklist entries for some new
    machines and using native backlight by default.
 
  - ACPI device enumeration changes to create platform devices
    rather than PNP devices for ACPI device objects with _HID by
    default.  PNP devices will still be created for the ACPI device
    object with device IDs corresponding to real PNP devices, so
    that change should not break things left and right, and we're
    expecting to see more and more ACPI-enumerated platform devices
    in the future.  From Zhang Rui and Rafael J Wysocki.
 
  - Updates for the ACPI LPSS (Low-Power Subsystem) driver allowing
    it to handle system suspend/resume on Asus T100 correctly.
    From Heikki Krogerus and Rafael J Wysocki.
 
  - PM core update introducing a mechanism to allow runtime-suspended
    devices to stay suspended over system suspend/resume transitions
    if certain additional conditions related to coordination within
    device hierarchy are met.  Related PM documentation update and
    ACPI PM domain support for the new feature.  From Rafael J Wysocki.
 
  - Fixes and improvements related to the "freeze" sleep state. They
    affect several places including cpuidle, PM core, ACPI core, and
    the ACPI battery driver.  From Rafael J Wysocki and Zhang Rui.
 
  - Miscellaneous fixes and updates of the ACPI core from Aaron Lu,
    Bjørn Mork, Hanjun Guo, Lan Tianyu, and Rafael J Wysocki.
 
  - Fixes and cleanups for the ACPI processor and ACPI PAD (Processor
    Aggregator Device) drivers from Baoquan He, Manuel Schölling,
    Tony Camuso, and Toshi Kani.
 
  - System suspend/resume optimization in the ACPI battery driver from
    Lan Tianyu.
 
  - OPP (Operating Performance Points) subsystem updates from
    Chander Kashyap, Mark Brown, and Nishanth Menon.
 
  - cpufreq core fixes, updates and cleanups from Srivatsa S Bhat,
    Stratos Karafotis, and Viresh Kumar.
 
  - Updates, fixes and cleanups for the Tegra, powernow-k8, imx6q,
    s5pv210, nforce2, and powernv cpufreq drivers from Brian Norris,
    Jingoo Han, Paul Bolle, Philipp Zabel, Stratos Karafotis, and
    Viresh Kumar.
 
  - intel_pstate driver fixes and cleanups from Dirk Brandewie,
    Doug Smythies, and Stratos Karafotis.
 
  - Enabling the big.LITTLE cpufreq driver on arm64 from Mark Brown.
 
  - Fix for the cpuidle menu governor from Chander Kashyap.
 
  - New ARM clps711x cpuidle driver from Alexander Shiyan.
 
  - Hibernate core fixes and cleanups from Chen Gang, Dan Carpenter,
    Fabian Frederick, Pali Rohár, and Sebastian Capella.
 
  - Intel RAPL (Running Average Power Limit) driver updates from
    Jacob Pan.
 
  - PNP subsystem updates from Bjorn Helgaas and Fabian Frederick.
 
  - devfreq core updates from Chanwoo Choi and Paul Bolle.
 
  - devfreq updates for exynos4 and exynos5 from Chanwoo Choi and
    Bartlomiej Zolnierkiewicz.
 
  - turbostat tool fix from Jean Delvare.
 
  - cpupower tool updates from Prarit Bhargava, Ramkumar Ramachandra
    and Thomas Renninger.
 
  - New ACPI ec_access.c tool for poking at the EC in a safe way
    from Thomas Renninger.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJTjl16AAoJEILEb/54YlRxeKgP/RRQSV7lFtf582Dw/5M/iWOg
 qYeNtuYFLArEmJ7SpxHdKsU1ZRm3CahAS1j7grvQMQasUxTzoavMcSBNZefeaoNK
 d01LVNqcyKCZs3+izRezk5N1IY+AjdrOcqCdIk8rfgFnc6kOttYUrVcIzKuIKAvJ
 MsJ5s/uqP8G69FsAA3Ttdtr0HKiQhN4skSt424wntQRDeJNZPBs74mPKBGh8bxlO
 Zr/VCDibKQ2Z8jS7x+TzwZrOxgE1/9x0Cub6GAdTvAfS8A+utPwSkneUyopNqpQ+
 tJ5rz5R+HpmPMerizBuU+5s+tvjDPtH4/OZvOPSpYraQSFLOwx3hAm+a5k7fOGmc
 XWjXnXWT0i0V3iQkwrspTNjX1RgywbsHbmXrcWn192HResvMQ9zk2gH2ch6m8JhN
 yTV5V51dOZicpPuaTCvIkJpsV33p6vRz+EdPBiXoEdua5KKtOg8EnQ470dNaMR92
 3ZtWmIvSgGlyPyHlSHLfGXbPUwTYvDNV3aheIoXp9E6WY3WJN9J3WXm4EHKBNVaI
 H83kwuk1s92cgqh22H5Pcb0CmDcrbkUdP6hhsPS/aL80/EJMljRP2AYW1Y+l1LAf
 pzMLmekHFqQEDjFQltwGvFV/EjFeMHnqOgQONx9ygMaayCGGTYSDx3FbRDesf8t9
 qhoFcTPSxoo0XjrGrR6b
 =tpdF
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm into next

Pull ACPI and power management updates from Rafael Wysocki:
 "ACPICA is the leader this time (63 commits), followed by cpufreq (28
  commits), devfreq (15 commits), system suspend/hibernation (12
  commits), ACPI video and ACPI device enumeration (10 commits each).

  We have no major new features this time, but there are a few
  significant changes of how things work.  The most visible one will
  probably be that we are now going to create platform devices rather
  than PNP devices by default for ACPI device objects with _HID.  That
  was long overdue and will be really necessary to be able to use the
  same drivers for the same hardware blocks on ACPI and DT-based systems
  going forward.  We're not expecting fallout from this one (as usual),
  but it's something to watch nevertheless.

  The second change having a chance to be visible is that ACPI video
  will now default to using native backlight rather than the ACPI
  backlight interface which should generally help systems with broken
  Win8 BIOSes.  We're hoping that all problems with the native backlight
  handling that we had previously have been addressed and we are in a
  good enough shape to flip the default, but this change should be easy
  enough to revert if need be.

  In addition to that, the system suspend core has a new mechanism to
  allow runtime-suspended devices to stay suspended throughout system
  suspend/resume transitions if some extra conditions are met
  (generally, they are related to coordination within device hierarchy).
  However, enabling this feature requires cooperation from the bus type
  layer and for now it has only been implemented for the ACPI PM domain
  (used by ACPI-enumerated platform devices mostly today).

  Also, the acpidump utility that was previously shipped as a separate
  tool will now be provided by the upstream ACPICA along with the rest
  of ACPICA code, which will allow it to be more up to date and better
  supported, and we have one new cpuidle driver (ARM clps711x).

  The rest is improvements related to certain specific use cases,
  cleanups and fixes all over the place.

  Specifics:

   - ACPICA update to upstream version 20140424.  That includes a number
     of fixes and improvements related to things like GPE handling,
     table loading, headers, memory mapping and unmapping, DSDT/SSDT
     overriding, and the Unload() operator.  The acpidump utility from
     upstream ACPICA is included too.  From Bob Moore, Lv Zheng, David
     Box, David Binderman, and Colin Ian King.

   - Fixes and cleanups related to ACPI video and backlight interfaces
     from Hans de Goede.  That includes blacklist entries for some new
     machines and using native backlight by default.

   - ACPI device enumeration changes to create platform devices rather
     than PNP devices for ACPI device objects with _HID by default.  PNP
     devices will still be created for the ACPI device object with
     device IDs corresponding to real PNP devices, so that change should
     not break things left and right, and we're expecting to see more
     and more ACPI-enumerated platform devices in the future.  From
     Zhang Rui and Rafael J Wysocki.

   - Updates for the ACPI LPSS (Low-Power Subsystem) driver allowing it
     to handle system suspend/resume on Asus T100 correctly.  From
     Heikki Krogerus and Rafael J Wysocki.

   - PM core update introducing a mechanism to allow runtime-suspended
     devices to stay suspended over system suspend/resume transitions if
     certain additional conditions related to coordination within device
     hierarchy are met.  Related PM documentation update and ACPI PM
     domain support for the new feature.  From Rafael J Wysocki.

   - Fixes and improvements related to the "freeze" sleep state.  They
     affect several places including cpuidle, PM core, ACPI core, and
     the ACPI battery driver.  From Rafael J Wysocki and Zhang Rui.

   - Miscellaneous fixes and updates of the ACPI core from Aaron Lu,
     Bjørn Mork, Hanjun Guo, Lan Tianyu, and Rafael J Wysocki.

   - Fixes and cleanups for the ACPI processor and ACPI PAD (Processor
     Aggregator Device) drivers from Baoquan He, Manuel Schölling, Tony
     Camuso, and Toshi Kani.

   - System suspend/resume optimization in the ACPI battery driver from
     Lan Tianyu.

   - OPP (Operating Performance Points) subsystem updates from Chander
     Kashyap, Mark Brown, and Nishanth Menon.

   - cpufreq core fixes, updates and cleanups from Srivatsa S Bhat,
     Stratos Karafotis, and Viresh Kumar.

   - Updates, fixes and cleanups for the Tegra, powernow-k8, imx6q,
     s5pv210, nforce2, and powernv cpufreq drivers from Brian Norris,
     Jingoo Han, Paul Bolle, Philipp Zabel, Stratos Karafotis, and
     Viresh Kumar.

   - intel_pstate driver fixes and cleanups from Dirk Brandewie, Doug
     Smythies, and Stratos Karafotis.

   - Enabling the big.LITTLE cpufreq driver on arm64 from Mark Brown.

   - Fix for the cpuidle menu governor from Chander Kashyap.

   - New ARM clps711x cpuidle driver from Alexander Shiyan.

   - Hibernate core fixes and cleanups from Chen Gang, Dan Carpenter,
     Fabian Frederick, Pali Rohár, and Sebastian Capella.

   - Intel RAPL (Running Average Power Limit) driver updates from Jacob
     Pan.

   - PNP subsystem updates from Bjorn Helgaas and Fabian Frederick.

   - devfreq core updates from Chanwoo Choi and Paul Bolle.

   - devfreq updates for exynos4 and exynos5 from Chanwoo Choi and
     Bartlomiej Zolnierkiewicz.

   - turbostat tool fix from Jean Delvare.

   - cpupower tool updates from Prarit Bhargava, Ramkumar Ramachandra
     and Thomas Renninger.

   - New ACPI ec_access.c tool for poking at the EC in a safe way from
     Thomas Renninger"

* tag 'pm+acpi-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (187 commits)
  ACPICA: Namespace: Remove _PRP method support.
  intel_pstate: Improve initial busy calculation
  intel_pstate: add sample time scaling
  intel_pstate: Correct rounding in busy calculation
  intel_pstate: Remove C0 tracking
  PM / hibernate: fixed typo in comment
  ACPI: Fix x86 regression related to early mapping size limitation
  ACPICA: Tables: Add mechanism to control early table checksum verification.
  ACPI / scan: use platform bus type by default for _HID enumeration
  ACPI / scan: always register ACPI LPSS scan handler
  ACPI / scan: always register memory hotplug scan handler
  ACPI / scan: always register container scan handler
  ACPI / scan: Change the meaning of missing .attach() in scan handlers
  ACPI / scan: introduce platform_id device PNP type flag
  ACPI / scan: drop unsupported serial IDs from PNP ACPI scan handler ID list
  ACPI / scan: drop IDs that do not comply with the ACPI PNP ID rule
  ACPI / PNP: use device ID list for PNPACPI device enumeration
  ACPI / scan: .match() callback for ACPI scan handlers
  ACPI / battery: wakeup the system only when necessary
  power_supply: allow power supply devices registered w/o wakeup source
  ...
2014-06-04 08:57:16 -07:00
Rafael J. Wysocki 057beb1de5 Merge branch 'pm-cpufreq'
* pm-cpufreq: (28 commits)
  cpufreq: handle calls to ->target_index() in separate routine
  cpufreq: s5pv210: drop check for CONFIG_PM_VERBOSE
  cpufreq: intel_pstate: Remove unused member name of cpudata
  cpufreq: Break out early when frequency equals target_freq
  cpufreq: Tegra: drop wrapper around tegra_update_cpu_speed()
  cpufreq: imx6q: Remove unused include
  cpufreq: imx6q: Drop devm_clk/regulator_get usage
  cpufreq: powernow-k8: Suppress checkpatch warnings
  cpufreq: powernv: make local function static
  cpufreq: Enable big.LITTLE cpufreq driver on arm64
  cpufreq: nforce2: remove DEFINE_PCI_DEVICE_TABLE macro
  intel_pstate: Add CPU IDs for Broadwell processors
  cpufreq: Fix build error on some platforms that use cpufreq_for_each_*
  PM / OPP: Move cpufreq specific OPP functions out of generic OPP library
  PM / OPP: Remove cpufreq wrapper dependency on internal data organization
  cpufreq: Catch double invocations of cpufreq_freq_transition_begin/end
  intel_pstate: Remove sample parameter in intel_pstate_calc_busy
  cpufreq: Kconfig: Fix spelling errors
  cpufreq: Make linux-pm@vger.kernel.org official mailing list
  cpufreq: exynos: Use dev_err/info function instead of pr_err/info
  ...
2014-06-03 23:13:20 +02:00
Rafael J. Wysocki cd0c5bd391 Merge branches 'pnp', 'powercap', 'pm-runtime' and 'pm-opp'
* pnp:
  MAINTAINERS: Remove Bjorn Helgaas as PNP maintainer
  PNP / resources: remove positive test on unsigned values

* powercap:
  powercap / RAPL: add new CPU IDs
  powercap / RAPL: further relax energy counter checks

* pm-runtime:
  PM / runtime: Update documentation to reflect the current code flow

* pm-opp:
  PM / OPP: discard duplicate OPPs
  PM / OPP: Make OPP invisible to users in Kconfig
  PM / OPP: fix incorrect OPP count handling in of_init_opp_table
2014-06-03 23:13:00 +02:00
Zhang Rui 0c5ff0ef80 PM / sleep: unregister wakeup source when disabling device wakeup
When enabling a device' wakeup capability, a wakeup source
is created for the device automatically. But the wakeup source
is not unregistered when disabling the device' wakeup capability.

This results in zombie wakeup sources, after devices/drivers are unregistered.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-30 13:39:29 +02:00
Chander Kashyap 64ce854578 PM / OPP: discard duplicate OPPs
We don't have any protection against addition of duplicate OPPs currently and in
case some code tries to add them, it will end up corrupting OPP tables.

We need to handle some duplication cases separately as returning error might not
be the right thing always. The new list of return values for dev_pm_opp_add()
are:

 0:         On success OR
            Duplicate OPPs (both freq and volt are same) and opp->available
 -EEXIST:   Freq are same and volt are different OR
            Duplicate OPPs (both freq and volt are same) and !opp->available
 -ENOMEM:   Memory allocation failure

Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Chander Kashyap <k.chander@samsung.com>
Signed-off-by: Inderpal Singh <inderpal.s@samsung.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-27 00:50:26 +02:00
Chander Kashyap 086abb5859 PM / OPP: fix incorrect OPP count handling in of_init_opp_table
In of_init_opp_table function, if a failure to add an OPP is
detected, the count of OPPs, yet to be added is not updated.
Fix this by decrementing this count on failure as well.

Signed-off-by: Chander Kashyap <k.chander@samsung.com>
Signed-off-by: Inderpal Singh <inderpal.s@samsung.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 3.7+ <stable@vger.kernel.org> # 3.7+
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-19 23:02:36 +02:00
Rafael J. Wysocki aae4518b31 PM / sleep: Mechanism to avoid resuming runtime-suspended devices unnecessarily
Currently, some subsystems (e.g. PCI and the ACPI PM domain) have to
resume all runtime-suspended devices during system suspend, mostly
because those devices may need to be reprogrammed due to different
wakeup settings for system sleep and for runtime PM.

For some devices, though, it's OK to remain in runtime suspend
throughout a complete system suspend/resume cycle (if the device was in
runtime suspend at the start of the cycle).  We would like to do this
whenever possible, to avoid the overhead of extra power-up and power-down
events.

However, problems may arise because the device's descendants may require
it to be at full power at various points during the cycle.  Therefore the
most straightforward way to do this safely is if the device and all its
descendants can remain runtime suspended until the complete stage of
system resume.

To this end, introduce a new device PM flag, power.direct_complete
and modify the PM core to use that flag as follows.

If the ->prepare() callback of a device returns a positive number,
the PM core will regard that as an indication that it may leave the
device runtime-suspended.  It will then check if the system power
transition in progress is a suspend (and not hibernation in particular)
and if the device is, indeed, runtime-suspended.  In that case, the PM
core will set the device's power.direct_complete flag.  Otherwise it
will clear power.direct_complete for the device and it also will later
clear it for the device's parent (if there's one).

Next, the PM core will not invoke the ->suspend() ->suspend_late(),
->suspend_irq(), ->resume_irq(), ->resume_early(), or ->resume()
callbacks for all devices having power.direct_complete set.  It
will invoke their ->complete() callbacks, however, and those
callbacks are then responsible for resuming the devices as
appropriate, if necessary.  For example, in some cases they may
need to queue up runtime resume requests for the devices using
pm_request_resume().

Changelog partly based on an Alan Stern's description of the idea
(http://marc.info/?l=linux-pm&m=139940466625569&w=2).

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
2014-05-16 23:15:44 +02:00
Nishanth Menon a0dd7b7965 PM / OPP: Move cpufreq specific OPP functions out of generic OPP library
CPUFreq specific helper functions for OPP (Operating Performance Points)
now use generic OPP functions that allow CPUFreq to be be moved back
into CPUFreq framework. This allows for independent modifications
or future enhancements as needed isolated to just CPUFreq framework
alone.

Here, we just move relevant code and documentation to make this part of
CPUFreq infrastructure.

Cc: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-07 00:39:03 +02:00
Nishanth Menon 0f5c890e9b PM / OPP: Remove cpufreq wrapper dependency on internal data organization
CPUFREQ custom functions for OPP (Operating Performance Points)
currently exist inside the OPP library. These custom functions currently
depend on internal data structures to pick up OPP information to create
the cpufreq table.  For example, the cpufreq table is created precisely
in the same order of how OPP entries are stored inside the list implementation.

This kind of tight interdependency is purely artificial since the same
functionality can be achieved using the generic OPP functions
meant to do the same. This interdependency also limits the independent
modification of cpufreq and OPP library.

So use the generic dev_pm_opp_find_freq_ceil function that achieves the
table organization as we currently use.

As a result of this, we dont need to use the internal device_opp
structure anymore, and we hence we can switch over to rcu lock instead
of the mutex holding the internal list lock.

This breaking of dependency on internal data structure imposes no change
to usage of these.

NOTE: This change is a precursor to moving this cpufreq specific logic
out of the generic library into cpufreq.

Cc: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-07 00:35:51 +02:00
Peter Zijlstra 4e857c58ef arch: Mass conversion of smp_mb__*()
Mostly scripted conversion of the smp_mb__* barriers.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-arch@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-18 14:20:48 +02:00
Tushar Behera 39ac5ba51b PM / domains: Add pd_ignore_unused to keep power domains enabled
Keep all power-domains already enabled by bootloader on, even if no
driver has claimed them. This is useful for debug and development, but
should not be needed on a platform with proper driver support.

Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-07 14:15:49 +02:00
Linus Torvalds 70f6c08757 More ACPI and power management updates for 3.15-rc1
- Remaining changes from upstream ACPICA release 20140214 that introduce
    code to automatically serialize the execution of methods creating any
    named objects which really cannot be executed in parallel with each
    other anyway (previously ACPICA attempted to address that by aborting
    methods upon conflict detection, but that wasn't reliable enough and
    led to other issues).  From Bob Moore and Lv Zheng.
 
  - intel_pstate fix to use del_timer_sync() instead of del_timer() in
    the exit path before freeing the timer structure from Dirk Brandewie
    (original patch from Thomas Gleixner).
 
  - cpufreq fix related to system resume from Viresh Kumar.
 
  - Serialization of frequency transitions in cpufreq that involve
    PRECHANGE and POSTCHANGE notifications to avoid ordering issues
    resulting from race conditions.  From Srivatsa S Bhat and Viresh Kumar.
 
  - Revert of an ACPI processor driver change that was based on a specific
    interpretation of the ACPI spec which may not be correct (the relevant
    part of the spec appears to be incomplete).  From Hanjun Guo.
 
  - Runtime PM core cleanups and documentation updates from Geert Uytterhoeven.
 
  - PNP core cleanup from Michael Opdenacker.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJTO1+vAAoJEILEb/54YlRxHYgP/RB18RLcwSIPMTWoZPo5t+pd
 IGtHkG5xzCBZXiqL9OJLm+dH1V5w+wZVXh2865ZDiqq4CZYZWD6RUQnx5q0rSVR5
 54PYzx2I0i8ApPxRYTTmnb2NHUPedp3l0YSRC0gt73Q/6o9TcmOMtcn5pfTyCvbB
 m3am3mpKKxRD+vYCADjjUtuj4NQ62z9DjM5iJIql7Pj4kAJVgSxP8nsfHY6EwNaT
 m9mnNCA6Zemh89luM1W2vw69ZoZwLAbXIXJYCNy3khT13SYO2SCNhX/tlY7ncCvv
 P+9gawJb6Wio7pVHqRR0Lesc8J29uzivEeS8WqZ3R0P0HoTP6z5a5R+b06ecGQjF
 OWvj7wURjZE4t7qEtIOHmwIyCRE4Nxly90r5upj9kKVBaczz/LbDeCVfKU/Y2Vu6
 PPxmjRwjO4S8FqLihwiXCSYVf3pxBrDKgjjofM7f2CiO8D41C4KhgowbUqyUSCgw
 VKXU6UQbzVigfrGXsdqIJiTnEMmbOvrPy6PaVh27NlwXX3sg1SwYcoegsW+ee7m1
 jJdl1TRI27pl7NPgTkLpf5K7n6mkDsou8Y+PcQhFa6FNTn/k8gp/RfOHpLHaNTjL
 15Aswkm70Ojeae+Ahx8ZgrWXF7iu+uBX7KakeUVQJg/PFjXIspx+c/SrGzh7ZLa1
 aOqoKfFY7zDke4AV3eH/
 =EfZ8
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more ACPI and power management updates from Rafael Wysocki:
 "These are commits that were not quite ready when I sent the original
  pull request for 3.15-rc1 several days ago, but they have spent some
  time in linux-next since then and appear to be good to go.  All of
  them are fixes and cleanups.

  Specifics:

   - Remaining changes from upstream ACPICA release 20140214 that
     introduce code to automatically serialize the execution of methods
     creating any named objects which really cannot be executed in
     parallel with each other anyway (previously ACPICA attempted to
     address that by aborting methods upon conflict detection, but that
     wasn't reliable enough and led to other issues).  From Bob Moore
     and Lv Zheng.

   - intel_pstate fix to use del_timer_sync() instead of del_timer() in
     the exit path before freeing the timer structure from Dirk
     Brandewie (original patch from Thomas Gleixner).

   - cpufreq fix related to system resume from Viresh Kumar.

   - Serialization of frequency transitions in cpufreq that involve
     PRECHANGE and POSTCHANGE notifications to avoid ordering issues
     resulting from race conditions.  From Srivatsa S Bhat and Viresh
     Kumar.

   - Revert of an ACPI processor driver change that was based on a
     specific interpretation of the ACPI spec which may not be correct
     (the relevant part of the spec appears to be incomplete).  From
     Hanjun Guo.

   - Runtime PM core cleanups and documentation updates from Geert
     Uytterhoeven.

   - PNP core cleanup from Michael Opdenacker"

* tag 'pm+acpi-3.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: Make cpufreq_notify_transition & cpufreq_notify_post_transition static
  cpufreq: Convert existing drivers to use cpufreq_freq_transition_{begin|end}
  cpufreq: Make sure frequency transitions are serialized
  intel_pstate: Use del_timer_sync in intel_pstate_cpu_stop
  cpufreq: resume drivers before enabling governors
  PM / Runtime: Spelling s/competing/completing/
  PM / Runtime: s/foo_process_requests/foo_process_next_request/
  PM / Runtime: GENERIC_SUBSYS_PM_OPS is gone
  PM / Runtime: Correct documented return values for generic PM callbacks
  PM / Runtime: Split line longer than 80 characters
  PM / Runtime: dev_pm_info.runtime_error is signed
  Revert "ACPI / processor: Make it possible to get APIC ID via GIC"
  ACPICA: Enable auto-serialization as a default kernel behavior.
  ACPICA: Ignore sync_level for methods that have been auto-serialized.
  ACPICA: Add additional named objects for the auto-serialize method scan.
  ACPICA: Add auto-serialization support for ill-behaved control methods.
  ACPICA: Remove global option to serialize all control methods.
  PNP: remove deprecated IRQF_DISABLED
2014-04-02 14:10:21 -07:00
Linus Torvalds 158e0d3621 Driver core / sysfs patches for 3.15-rc1
Here's the big driver core / sysfs update for 3.15-rc1.
 
 Lots of kernfs updates to make it useful for other subsystems, and a few
 other tiny driver core patches.
 
 All have been in linux-next for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iEYEABECAAYFAlM7A0wACgkQMUfUDdst+ynJNACfZlY+KNKIhNFt1OOW8rQfSZzy
 1PYAnjYuOoly01JlPrpJD5b4TdxaAq71
 =GVUg
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core and sysfs updates from Greg KH:
 "Here's the big driver core / sysfs update for 3.15-rc1.

  Lots of kernfs updates to make it useful for other subsystems, and a
  few other tiny driver core patches.

  All have been in linux-next for a while"

* tag 'driver-core-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (42 commits)
  Revert "sysfs, driver-core: remove unused {sysfs|device}_schedule_callback_owner()"
  kernfs: cache atomic_write_len in kernfs_open_file
  numa: fix NULL pointer access and memory leak in unregister_one_node()
  Revert "driver core: synchronize device shutdown"
  kernfs: fix off by one error.
  kernfs: remove duplicate dir.c at the top dir
  x86: align x86 arch with generic CPU modalias handling
  cpu: add generic support for CPU feature based module autoloading
  sysfs: create bin_attributes under the requested group
  driver core: unexport static function create_syslog_header
  firmware: use power efficient workqueue for unloading and aborting fw load
  firmware: give a protection when map page failed
  firmware: google memconsole driver fixes
  firmware: fix google/gsmi duplicate efivars_sysfs_init()
  drivers/base: delete non-required instances of include <linux/init.h>
  kernfs: fix kernfs_node_from_dentry()
  ACPI / platform: drop redundant ACPI_HANDLE check
  kernfs: fix hash calculation in kernfs_rename_ns()
  kernfs: add CONFIG_KERNFS
  sysfs, kobject: add sysfs wrapper for kernfs_enable_ns()
  ...
2014-04-01 16:28:19 -07:00
Rafael J. Wysocki 7b5c39389c Merge branch 'pm-runtime'
* pm-runtime:
  PM / Runtime: Spelling s/competing/completing/
  PM / Runtime: s/foo_process_requests/foo_process_next_request/
  PM / Runtime: GENERIC_SUBSYS_PM_OPS is gone
  PM / Runtime: Correct documented return values for generic PM callbacks
  PM / Runtime: Split line longer than 80 characters
  PM / Runtime: dev_pm_info.runtime_error is signed
2014-04-01 22:10:15 +02:00
Geert Uytterhoeven 9accff57e0 PM / Runtime: Spelling s/competing/completing/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-26 16:33:53 +01:00
Rafael J. Wysocki 5a2d853ffc Merge branch 'pm-cpufreq'
* pm-cpufreq: (30 commits)
  intel_pstate: Set core to min P state during core offline
  cpufreq: Add stop CPU callback to cpufreq_driver interface
  cpufreq: Remove unnecessary braces
  cpufreq: Fix checkpatch errors and warnings
  cpufreq: powerpc: add cpufreq transition latency for FSL e500mc SoCs
  cpufreq: remove unused notifier: CPUFREQ_{SUSPENDCHANGE|RESUMECHANGE}
  cpufreq: Do not allow ->setpolicy drivers to provide ->target
  cpufreq: arm_big_little: set 'physical_cluster' for each CPU
  cpufreq: arm_big_little: make vexpress driver depend on bL core driver
  cpufreq: SPEAr: Instantiate as platform_driver
  cpufreq: Remove unnecessary variable/parameter 'frozen'
  cpufreq: Remove cpufreq_generic_exit()
  cpufreq: add 'freq_table' in struct cpufreq_policy
  cpufreq: Reformat printk() statements
  cpufreq: Tegra: Use cpufreq_generic_suspend()
  cpufreq: s5pv210: Use cpufreq_generic_suspend()
  cpufreq: exynos: Use cpufreq_generic_suspend()
  cpufreq: Implement cpufreq_generic_suspend()
  cpufreq: suspend governors on system suspend/hibernate
  cpufreq: move call to __find_governor() to cpufreq_init_policy()
  ...
2014-03-20 13:26:12 +01:00
Rafael J. Wysocki 36cc86e8ec Merge branches 'pm-runtime' and 'pm-sleep'
* pm-runtime:
  PM / Runtime: Update runtime_idle() documentation for return value meaning

* pm-sleep:
  PM / sleep: Correct whitespace errors in <linux/pm.h>
  PM: Add missing "freeze" state
  PM / Hibernate: Spelling s/anonymouns/anonymous/
  PM / Runtime: Add missing "it" in comment
  PM / suspend: Remove unnecessary !!
  PCI / PM: Resume runtime-suspended devices later during system suspend
  ACPI / PM: Resume runtime-suspended devices later during system suspend
  PM / sleep: Set pm_generic functions to NULL for !CONFIG_PM_SLEEP
  PM: fix typo in comment
  PM / hibernate: use name_to_dev_t to parse resume
  PM / wakeup: Include appropriate header file in kernel/power/wakelock.c
  PM / sleep: Move prototype declaration to header file kernel/power/power.h
  PM / sleep: Asynchronous threads for suspend_late
  PM / sleep: Asynchronous threads for suspend_noirq
  PM / sleep: Asynchronous threads for resume_early
  PM / sleep: Asynchronous threads for resume_noirq
  PM / sleep: Two flags for async suspend_noirq and suspend_late
2014-03-20 13:25:54 +01:00
Rafael J. Wysocki 165f5fd04a Merge branches 'pm-qos', 'pm-domains' and 'pm-drivers'
* pm-qos:
  PM / QoS: Add type to dev_pm_qos_add_ancestor_request() arguments
  ACPI / LPSS: Support for device latency tolerance PM QoS
  ACPI / scan: Add bind/unbind callbacks to struct acpi_scan_handler
  PM / QoS: Introcuce latency tolerance device PM QoS type
  PM / QoS: Add no_constraints_value field to struct pm_qos_constraints
  PM / QoS: Rename device resume latency QoS items

* pm-domains:
  PM / domains: Turn latency warning into debug message

* pm-drivers:
  PM: Add pm_runtime_suspend|resume_force functions
  PM / runtime: Fetch runtime PM callbacks using a macro
2014-03-20 13:25:36 +01:00
Geert Uytterhoeven 7b60894ff8 PM / Runtime: Add missing "it" in comment
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-12 00:54:53 +01:00
Viresh Kumar 2f0aea9363 cpufreq: suspend governors on system suspend/hibernate
This patch adds cpufreq suspend/resume calls to dpm_{suspend|resume}()
for handling suspend/resume of cpufreq governors.

Lan Tianyu (Intel) & Jinhyuk Choi (Broadcom) found an issue where the
tunables configuration for clusters/sockets with non-boot CPUs was
lost after system suspend/resume, as we were notifying governors with
CPUFREQ_GOV_POLICY_EXIT on removal of the last CPU for that policy
which caused the tunables memory to be freed.

This is fixed by preventing any governor operations from being
carried out between the device suspend and device resume stages of
system suspend and resume, respectively.

We could have added these callbacks at dpm_{suspend|resume}_noirq()
level, but there is an additional problem that the majority of I/O
devices is already suspended at that point and if cpufreq drivers
want to change the frequency before suspending, then that not be
possible on some platforms (which depend on peripherals like i2c,
regulators, etc).

Reported-and-tested-by: Lan Tianyu <tianyu.lan@intel.com>
Reported-by: Jinhyuk Choi <jinchoi@broadcom.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[rjw: Changelog]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-06 15:04:12 +01:00
Ulf Hansson 37f204164d PM: Add pm_runtime_suspend|resume_force functions
This patch provides two new runtime PM helper functions which intend to
be used from system suspend/resume callbacks, to make sure devices are
put into low power state during system suspend and brought back to full
power at system resume.

The prerequisite is to have all levels of a device's runtime PM
callbacks to be defined through the SET_PM_RUNTIME_PM_OPS macro, which
means these are available for CONFIG_PM.

By using the new runtime PM helper functions especially the two
scenarios below will be addressed.

1) The PM core prevents .runtime_suspend callbacks from being invoked
during system suspend. That means even for a runtime PM centric
subsystem and driver, the device needs to be put into low power state
from a system suspend callback. Otherwise it may very well be left in
full power state (runtime resumed) while the system is suspended. By
using the new helper functions, we make sure to walk the hierarchy of
a device's power domain, subsystem and driver.

2) Subsystems and drivers need to cope with all the combinations of
CONFIG_PM_SLEEP and CONFIG_PM_RUNTIME. The two new helper functions
smothly addresses this.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-02 00:18:15 +01:00
Ulf Hansson 5f59df7983 PM / runtime: Fetch runtime PM callbacks using a macro
While fetching the proper runtime PM callback, we walk the hierarchy of
device's power domains, subsystems and drivers.

This is common for rpm_suspend(), rpm_idle() and rpm_resume(). Let's
clean up the code by using a macro that handles this.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-02 00:18:15 +01:00
Philipp Zabel 7d1af28732 PM / domains: Turn latency warning into debug message
If devices don't provide latency data, this warning can be quite noisy until
the pm domain was enabled and disabled a few times. Turn this warning into
a debug message.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-01 00:43:10 +01:00
Liu, Chuansheng de377b3972 PM / sleep: Asynchronous threads for suspend_late
In analogy with commits 5af84b8270 and 97df8c1299, using
asynchronous threads can improve the overall suspend_late
time significantly.

This patch is for suspend_late phase.

Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-20 01:30:09 +01:00
Liu, Chuansheng 28b6fd6e37 PM / sleep: Asynchronous threads for suspend_noirq
In analogy with commits 5af84b8270 and 97df8c1299, using
asynchronous threads can improve the overall suspend_noirq
time significantly.

This patch is for suspend_noirq phase.

Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-20 01:30:09 +01:00
Liu, Chuansheng 9e5e7910df PM / sleep: Asynchronous threads for resume_early
In analogy with commits 5af84b8270 and 97df8c1299, using
asynchronous threads can improve the overall resume_early
time significantly.

This patch is for resume_early phase.

Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-20 01:30:09 +01:00
Liu, Chuansheng 76569faa62 PM / sleep: Asynchronous threads for resume_noirq
In analogy with commits 5af84b8270 and 97df8c1299, using
asynchronous threads can improve the overall resume_noirq time
significantly.

One typical case is:
In resume_noirq phase and for the PCI devices, the function
pci_pm_resume_noirq() will be called, and there is one d3_delay
(10ms) at least.

With the way of asynchronous threads, we just need wait d3_delay
time once in parallel for each calling, which saves much time to
resume quickly.

Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-20 01:30:09 +01:00
Liu, Chuansheng 3d2699bc17 PM / sleep: Two flags for async suspend_noirq and suspend_late
The patch is a helper adding two new flags for implementing
async threads for suspend_noirq and suspend_late.

Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-20 01:30:08 +01:00
Paul Gortmaker 4272b9611c drivers/base: delete non-required instances of include <linux/init.h>
None of these files are actually using any __init type directives
and hence don't need to include <linux/init.h>.  Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.

Cc: Len Brown <len.brown@intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-14 14:31:37 -08:00
Rafael J. Wysocki 71d821fdae PM / QoS: Add type to dev_pm_qos_add_ancestor_request() arguments
Rework dev_pm_qos_add_ancestor_request() so that device PM QoS type
is passed to it as the third argument and make it support the
DEV_PM_QOS_LATENCY_TOLERANCE device PM QoS type (in addition to
DEV_PM_QOS_RESUME_LATENCY).

That will allow the drivers of devices without latency tolerance
hardware support to use their ancestors having it as proxies for
their latency tolerance requirements.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-11 00:36:00 +01:00
Rafael J. Wysocki 2d984ad132 PM / QoS: Introcuce latency tolerance device PM QoS type
Add a new latency tolerance device PM QoS type to be use for
specifying active state (RPM_ACTIVE) memory access (DMA) latency
tolerance requirements for devices.  It may be used to prevent
hardware from choosing overly aggressive energy-saving operation
modes (causing too much latency to appear) for the whole platform.

This feature reqiures hardware support, so it only will be
available for devices having a new .set_latency_tolerance()
callback in struct dev_pm_info populated, in which case the
routine pointed to by it should implement whatever is necessary
to transfer the effective requirement value to the hardware.

Whenever the effective latency tolerance changes for the device,
its .set_latency_tolerance() callback will be executed and the
effective value will be passed to it.  If that value is negative,
which means that the list of latency tolerance requirements for
the device is empty, the callback is expected to switch the
underlying hardware latency tolerance control mechanism to an
autonomous mode if available.  If that value is PM_QOS_LATENCY_ANY,
in turn, and the hardware supports a special "no requirement"
setting, the callback is expected to use it.  That allows software
to prevent the hardware from automatically updating the device's
latency tolerance in response to its power state changes (e.g. during
transitions from D3cold to D0), which generally may be done in the
autonomous latency tolerance control mode.

If .set_latency_tolerance() is present for the device, a new
pm_qos_latency_tolerance_us attribute will be present in the
devivce's power directory in sysfs.  Then, user space can use
that attribute to specify its latency tolerance requirement for
the device, if any.  Writing "any" to it means "no requirement, but
do not let the hardware control latency tolerance" and writing
"auto" to it allows the hardware to be switched to the autonomous
mode if there are no other requirements from the kernel side in the
device's list.

This changeset includes a fix from Mika Westerberg.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-11 00:35:38 +01:00
Rafael J. Wysocki 327adaedf2 PM / QoS: Add no_constraints_value field to struct pm_qos_constraints
Add a new field, no_constraints_value, to struct pm_qos_constraints
representing a list of PM QoS constraint requests to be returned by
pm_qos_get_value() when that list of requests is empty.

That field will be equal to default_value for all of the existing
global PM QoS classes and for the resume latency device PM QoS type,
but it will be different from default_value for the new latency
tolerance device PM QoS type introduced by the next changeset.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-11 00:35:29 +01:00
Rafael J. Wysocki b02f6695f7 PM / QoS: Rename device resume latency QoS items
Rename symbols, variables, functions and structure fields related do
the resume latency device PM QoS type so that it is clear where they
belong (in particular, to avoid confusion with the latency tolerance
device PM QoS type introduced by a subsequent changeset).

Update the PM QoS documentation to better reflect its current state.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-11 00:35:23 +01:00
Rafael J. Wysocki 380062bd66 Merge branch 'pm-clk'
* pm-clk:
  PM / clock_ops: report clock errors from clk_enable()
  PM / clock_ops: check return of clk_enable() in pm_clk_resume()
  PM / clock_ops: fix up clk prepare/unprepare count
2014-01-17 01:56:56 +01:00
Ben Dooks 5cda3fbb15 PM / clock_ops: report clock errors from clk_enable()
If clk_enable() fails, then print a message so that the user can see
what is happening instead of silently failing to enable the clock.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Ian Molton <ian.molton@codethink.co.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-15 01:50:50 +01:00
Ben Dooks afdd3ab315 PM / clock_ops: check return of clk_enable() in pm_clk_resume()
The clk_enable() call in the pm_clk_resume() call returns an error
that is not being checked. If clk_enable() fails then we should
not set the state of the clock to PCE_STATUS_ENABLED.

Note, the issue of warning the user if this fails has not been
addressed in this patch as this is not the only place the driver
calls clk_enable().

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Ian Molton <ian.molton@codethink.co.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-15 01:50:50 +01:00
Ben Dooks 8a6720ec20 PM / clock_ops: fix up clk prepare/unprepare count
The drivers/base/power/clock_ops.c file is causing warnings from
the clock driver (as shown below) due to failing to do a clk_prepare()
call before enabling a clock. It also fails to check the balance of
prepare/unprepare as __pm_clk_remove() do clk_disable_unprepare() call.

This bug has probably been in since commit b2476490e ("clk: introduce
the common clock framework") as the warning was part of the original
commit. It is strange that it has not been noticed (although this has
also been coupled with a failure for certain SH builds to not build the
necessary glue to use this method of controlling the clocks).

In summary, this is probably needed in several stable branches but need
advice on which ones.

On the Renesas Lager board, this causes numerous warnings of the following
and even worse the clock system will not enable clocks, causing drivers
that are in development to fail to work:

WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:883 __clk_enable+0x2c/0xa0()

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Ian Molton <ian.molton@codethink.co.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-15 01:50:50 +01:00
Ulf Hansson 717e5d458e PM / Runtime: Implement the pm_generic_runtime functions for CONFIG_PM
The pm_generic_runtime_suspend|resume functions were implemented within
CONFIG_PM_RUNTIME.

As we also may use runtime PM callbacks during system suspend, to put
devices into low power state, we need to move the implementation of
pm_generic_runtime_suspend|resume to CONFIG_PM.

This change gives a power domain provision to invoke a platform
driver's runtime PM callback from a power domain's system PM callback.
This were earlier prevented by the platform bus, since it uses the
pm_generic_runtime_suspend|resume functions as runtime PM callbacks.

Cc: Kevin Hilman <khilman@linaro.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-22 01:39:58 +01:00
Rafael J. Wysocki 12205a4b79 Revert "cpufreq: suspend governors on system suspend/hibernate"
Commit 5a87182aa2 (cpufreq: suspend governors on system
suspend/hibernate) causes hibernation problems to happen on
Bjørn Mork's and Paul Bolle's systems, so revert it.

Fixes: 5a87182aa2 (cpufreq: suspend governors on system suspend/hibernate)
Reported-by: Bjørn Mork <bjorn@mork.no>
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-08 01:04:17 +01:00
Rafael J. Wysocki 7cdcec991c Merge branches 'pm-cpuidle' and 'pm-cpufreq'
* pm-cpuidle:
  cpuidle: Check for dev before deregistering it.
  intel_idle: Fixed C6 state on Avoton/Rangeley processors

* pm-cpufreq:
  cpufreq: fix garbage kobjects on errors during suspend/resume
  cpufreq: suspend governors on system suspend/hibernate
2013-12-06 02:17:59 +01:00
Viresh Kumar 5a87182aa2 cpufreq: suspend governors on system suspend/hibernate
This patch adds cpufreq suspend/resume calls to dpm_{suspend|resume}_noirq()
for handling suspend/resume of cpufreq governors.

Lan Tianyu (Intel) & Jinhyuk Choi (Broadcom) found anr issue where
tunables configuration for clusters/sockets with non-boot CPUs was
getting lost after suspend/resume, as we were notifying governors
with CPUFREQ_GOV_POLICY_EXIT on removal of the last cpu for that
policy and so deallocating memory for tunables. This is fixed by
this patch as we don't allow any operation on governors after
device suspend and before device resume now.

Reported-and-tested-by: Lan Tianyu <tianyu.lan@intel.com>
Reported-by: Jinhyuk Choi <jinchoi@broadcom.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[rjw: Changelog, minor cleanups]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-11-28 14:47:31 +01:00
Linus Torvalds 82023bb7f7 More ACPI and power management updates for 3.13-rc1
- ACPI-based device hotplug fixes for issues introduced recently and
   a fix for an older error code path bug in the ACPI PCI host bridge
   driver.
 
 - Fix for recently broken OMAP cpufreq build from Viresh Kumar.
 
 - Fix for a recent hibernation regression related to s2disk.
 
 - Fix for a locking-related regression in the ACPI EC driver from
   Puneet Kumar.
 
 - System suspend error code path fix related to runtime PM and
   runtime PM documentation update from Ulf Hansson.
 
 - cpufreq's conservative governor fix from Xiaoguang Chen.
 
 - New processor IDs for intel_idle and turbostat and removal of
   an obsolete Kconfig option from Len Brown.
 
 - New device IDs for the ACPI LPSS (Low-Power Subsystem) driver and
   ACPI-based PCI hotplug (ACPIPHP) cleanup from Mika Westerberg.
 
 - Removal of several ACPI video DMI blacklist entries that are not
   necessary any more from Aaron Lu.
 
 - Rework of the ACPI companion representation in struct device and
   code cleanup related to that change from Rafael J Wysocki,
   Lan Tianyu and Jarkko Nikula.
 
 - Fixes for assigning names to ACPI-enumerated I2C and SPI devices
   from Jarkko Nikula.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABCAAGBQJSjLYNAAoJEILEb/54YlRxkEQP/1pmFWNwSsxLtTHd+PEs0Xbo
 QccqvjQrnw/c8GcmK4eZrz6/xyuepmmjy9kfRKj2ENZniy0NEsSFqkTdSO3vYlva
 8HKWUj7MV3evhFERXAF6Tu0b4Enx4jOP7VMtmYxJo3qrSnKRUcUzc6DGv/ACsUT1
 Nkj0Lhdsg053Z+YzIXrl50w0tCDEMhVmWlMHBtYgr+dMNVnkfPBGkqMblMkKCXT2
 w/yHvauZlxQHtI+8bVqTuGgNN0CPzdlpFGiuUF+5mDf6dRX8zlSn56Ia+Wyw1k9X
 dQp4jYQOgPRo03rNKqQPDiPxUdc7T0RAHRvDB51Ncweuh5PfZGguQe71p6/LKY2W
 i6zblZ0f/vc13hTiMrP+qzKcwZvgPB5DH7SfnHr61JKV7GNFCdYAqoceS5hYMzR9
 d2Fd+txgm763IHWewXfDS/G2cU492R5qr4jpmUIACBQKWDZcqmSRDwRj83t56Ltb
 jgFBMbg4vZxG7IARhind74xsALxdhsgmFjPmx+0qPWjYxcU8otQZpXbgGNI9iOuW
 pxIQv5WPQW0tTmwO4HSuVCOwDPLPz5R0jkev7SvSj3Ek3TeD7He4LmnK055CATiC
 puq+6dp1FISPOPJYk+0DI61qN/CB/qNwRp8LU3ctZwudPVhznIE9FFQ3iN1FdBg2
 X8VDcT9t7VvVuxSBjgkj
 =QMp+
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-2-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more ACPI and power management updates from Rafael Wysocki:

 - ACPI-based device hotplug fixes for issues introduced recently and a
   fix for an older error code path bug in the ACPI PCI host bridge
   driver

 - Fix for recently broken OMAP cpufreq build from Viresh Kumar

 - Fix for a recent hibernation regression related to s2disk

 - Fix for a locking-related regression in the ACPI EC driver from
   Puneet Kumar

 - System suspend error code path fix related to runtime PM and runtime
   PM documentation update from Ulf Hansson

 - cpufreq's conservative governor fix from Xiaoguang Chen

 - New processor IDs for intel_idle and turbostat and removal of an
   obsolete Kconfig option from Len Brown

 - New device IDs for the ACPI LPSS (Low-Power Subsystem) driver and
   ACPI-based PCI hotplug (ACPIPHP) cleanup from Mika Westerberg

 - Removal of several ACPI video DMI blacklist entries that are not
   necessary any more from Aaron Lu

 - Rework of the ACPI companion representation in struct device and code
   cleanup related to that change from Rafael J Wysocki, Lan Tianyu and
   Jarkko Nikula

 - Fixes for assigning names to ACPI-enumerated I2C and SPI devices from
   Jarkko Nikula

* tag 'pm+acpi-2-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (24 commits)
  PCI / hotplug / ACPI: Drop unused acpiphp_debug declaration
  ACPI / scan: Set flags.match_driver in acpi_bus_scan_fixed()
  ACPI / PCI root: Clear driver_data before failing enumeration
  ACPI / hotplug: Fix PCI host bridge hot removal
  ACPI / hotplug: Fix acpi_bus_get_device() return value check
  cpufreq: governor: Remove fossil comment in the cpufreq_governor_dbs()
  ACPI / video: clean up DMI table for initial black screen problem
  ACPI / EC: Ensure lock is acquired before accessing ec struct members
  PM / Hibernate: Do not crash kernel in free_basic_memory_bitmaps()
  ACPI / AC: Remove struct acpi_device pointer from struct acpi_ac
  spi: Use stable dev_name for ACPI enumerated SPI slaves
  i2c: Use stable dev_name for ACPI enumerated I2C slaves
  ACPI: Provide acpi_dev_name accessor for struct acpi_device device name
  ACPI / bind: Use (put|get)_device() on ACPI device objects too
  ACPI: Eliminate the DEVICE_ACPI_HANDLE() macro
  ACPI / driver core: Store an ACPI device pointer in struct acpi_dev_node
  cpufreq: OMAP: Fix compilation error 'r & ret undeclared'
  PM / Runtime: Fix error path for prepare
  PM / Runtime: Update documentation around probe|remove|suspend
  cpufreq: conservative: set requested_freq to policy max when it is over policy max
  ...
2013-11-20 13:25:04 -08:00
Rafael J. Wysocki 77aa26514a Merge branch 'pm-runtime'
* pm-runtime:
  PM / Runtime: Fix error path for prepare
  PM / Runtime: Update documentation around probe|remove|suspend
2013-11-19 01:06:49 +01:00
Wolfram Sang 16735d022f tree-wide: use reinit_completion instead of INIT_COMPLETION
Use this new function to make code more comprehensible, since we are
reinitialzing the completion, not initializing.

[akpm@linux-foundation.org: linux-next resyncs]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-15 09:32:21 +09:00
Ulf Hansson aa1b9f13b3 PM / Runtime: Fix error path for prepare
If a device prepare callback for some reason would fail, the PM core
prevented the device from going inactive forever.

In this case, to reverse the pm_runtime_get_noresume() we invokes the
asyncronous pm_runtime_put(), thus restoring the usage count.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-11-14 00:48:19 +01:00
Rafael J. Wysocki 93658cb859 Merge branch 'pm-cpufreq'
* pm-cpufreq: (167 commits)
  cpufreq: create per policy rwsem instead of per CPU cpu_policy_rwsem
  intel_pstate: Add Baytrail support
  intel_pstate: Refactor driver to support CPUs with different MSR layouts
  cpufreq: Implement light weight ->target_index() routine
  PM / OPP: rename header to linux/pm_opp.h
  PM / OPP: rename data structures to dev_pm equivalents
  PM / OPP: rename functions to dev_pm_opp*
  cpufreq / governor: Remove fossil comment
  cpufreq: exynos4210: Use the common clock framework to set APLL clock rate
  cpufreq: exynos4x12: Use the common clock framework to set APLL clock rate
  cpufreq: Detect spurious invocations of update_policy_cpu()
  cpufreq: pmac64: enable cpufreq on iMac G5 (iSight) model
  cpufreq: pmac64: provide cpufreq transition latency for older G5 models
  cpufreq: pmac64: speed up frequency switch
  cpufreq: highbank-cpufreq: Enable Midway/ECX-2000
  exynos-cpufreq: fix false return check from "regulator_set_voltage"
  speedstep-centrino: Remove unnecessary braces
  acpi-cpufreq: Add comment under ACPI_ADR_SPACE_SYSTEM_IO case
  cpufreq: arm-big-little: use clk_get instead of clk_get_sys
  cpufreq: exynos: Show a list of available frequencies
  ...

Conflicts:
	drivers/devfreq/exynos/exynos5_bus.c
2013-10-28 01:29:34 +01:00
Rafael J. Wysocki 6e0ca95aa3 Merge branch 'pm-sleep'
* pm-sleep:
  PM / Hibernate: Use bool for boolean fields of struct snapshot_data
  PM / Sleep: Detect device suspend/resume lockup and log event
2013-10-28 01:28:07 +01:00
Nishanth Menon e4db1c7439 PM / OPP: rename header to linux/pm_opp.h
Since Operating Performance Points (OPP) functions are specific
to device specific power management, be specific and rename opp.h
to pm_opp.h

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-25 22:33:23 +02:00
Nishanth Menon 47d43ba73e PM / OPP: rename data structures to dev_pm equivalents
Since Operating Performance Points (OPP) data structures are specific
to device specific power management, be specific and rename opp_* data
structures in OPP library with dev_pm_opp_* equivalent.

Affected structures are:
 struct opp
 enum opp_event

Minor checkpatch warning resulting of this change was fixed as well.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-25 22:33:23 +02:00
Nishanth Menon 5d4879cda6 PM / OPP: rename functions to dev_pm_opp*
Since Operating Performance Points (OPP) functions are specific to
device specific power management, be specific and rename opp_*
accessors in OPP library with dev_pm_opp_* equivalent.

Affected functions are:
 opp_get_voltage
 opp_get_freq
 opp_get_opp_count
 opp_find_freq_exact
 opp_find_freq_floor
 opp_find_freq_ceil
 opp_add
 opp_enable
 opp_disable
 opp_get_notifier
 opp_init_cpufreq_table
 opp_free_cpufreq_table

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-25 22:33:23 +02:00