Commit Graph

5 Commits

Author SHA1 Message Date
Rob Clark 37d77c3ab5 drm/msm: crank down gpu when inactive
Shut down the clks when the gpu has nothing to do.  A short inactivity
timer is used to provide a low pass filter for power transitions.

Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-03-31 10:27:46 -04:00
Rob Clark 871d812aa4 drm/msm: add support for non-IOMMU systems
Add a VRAM carveout that is used for systems which do not have an IOMMU.

The VRAM carveout uses CMA.  The arch code must setup a CMA pool for the
device (preferrably in highmem.. a 256m-512m VRAM pool in lowmem is not
cool).  The user can configure the VRAM pool size using msm.vram module
param.

Technically, the abstraction of IOMMU behind msm_mmu is not strictly
needed, but it simplifies the GEM code a bit, and will be useful later
when I add support for a2xx devices with GPUMMU, so I decided to keep
this part.

It appears to be possible to configure the GPU to restrict access to
addresses within the VRAM pool, but this is not done yet.  So for now
the GPU will refuse to load if there is no sort of mmu.  Once address
based limits are supported and tested to confirm that we aren't giving
the GPU access to arbitrary memory, this restriction can be lifted

Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-01-09 14:38:58 -05:00
Rob Clark bf2b33afb9 drm/msm: fix bus scaling
This got a bit broken with original patches when re-arranging things to
move dependencies on mach-msm inside #ifndef OF.

Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-01-09 14:38:58 -05:00
Rob Clark bd6f82d828 drm/msm: add basic hangcheck/recovery mechanism
A basic, no-frills recovery mechanism in case the gpu gets wedged.  We
could try to be a bit more fancy and restart the next submit after the
one that got wedged, but for now keep it simple.  This is enough to
recover things if, for example, the gpu hangs mid way through a piglit
run.

Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-08-24 14:57:19 -04:00
Rob Clark 7198e6b031 drm/msm: add a3xx gpu support
Add initial support for a3xx 3d core.

So far, with hardware that I've seen to date, we can have:
 + zero, one, or two z180 2d cores
 + a3xx or a2xx 3d core, which share a common CP (the firmware
   for the CP seems to implement some different PM4 packet types
   but the basics of cmdstream submission are the same)

Which means that the eventual complete "class" hierarchy, once
support for all past and present hw is in place, becomes:
 + msm_gpu
   + adreno_gpu
     + a3xx_gpu
     + a2xx_gpu
   + z180_gpu

This commit splits out the parts that will eventually be common
between a2xx/a3xx into adreno_gpu, and the parts that are even
common to z180 into msm_gpu.

Note that there is no cmdstream validation required.  All memory access
from the GPU is via IOMMU/MMU.  So as long as you don't map silly things
to the GPU, there isn't much damage that the GPU can do.

Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-08-24 14:57:18 -04:00