UBIFS aligns node lengths to 8, so budgeting has to do the
same. Well, direntry, inode, and page budgets are already
aligned, but not inode data budget (e.g., data in special
devices or symlinks). Do this for inode data as well.
Also, add corresponding debugging checks.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Budgeting is a crucial UBIFS subsystem - add more assertions
to improve requests checking. This is not compiled in when
UBIFS debugging is disabled.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
The debug function that checks orphans, does so using the
TNC mutex. That means it will not see a correct picture
if the inode is removed from the orphan tree before it is
removed from TNC.
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
The values in these two fields need to be preserved independently
and so a union cannot be used.
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Every time anything is deleted, UBIFS writes the deletion inode
node twice - once in 'ubifs_jnl_update()' and the second time in
'ubifs_jnl_write_inode()'. However, the second write is not needed
if no commit happened after 'ubifs_jnl_update()'. This patch
checks that condition and avoids writing the deletion inode for
the second time.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Increment the commit number at the beginnig of the commit, instead
of doing this after the commit. This is needed for further
optimizations.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
The 'last_reference' parameter of 'pack_inode()' is not really
needed because 'inode->i_nlink' may be tested instead. Zap it.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Simplify 'ubifs_jnl_write_inode()' by removing the 'deletion'
parameter which is not really needed because we may test
inode->i_nlink and check whether this is a deletion or not.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Orphan inodes are deleted inodes which will disappear after FS
re-mount. There is not need to write orphan inodes back, because
they are not needed on the flash media.
So optimize orphans a little by not writing them back. Just mark
them as clean, free the budget, and report success to VFS.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
We use ubifs_ro_mode() quite a lot, and not in fast-path, so
there is no reason to blow the code up by having it inlined.
Also, we usually want R/O mode change to be seen to other
CPUs as soon as possible, so when we make this a function
call, we will automatically have a memory barrier.
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
UBI transparently handles write errors by automatically copying
and remapping the affected eraseblock. If UBI is unable to do
that, for example its pool of eraseblocks reserved for bad block
handling is empty, then the error is propagated to UBIFS. UBIFS
must protect the media from falling into an inconsistent state
by immediately switching to read-only mode. In the case of log
updates, this was not being done.
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
UBIFS recovery testing debug facility simulates media failures.
When simulating an IO error, the error code returned must be
-EIO but it was not always if the user switched off the
debug recovery testing option at the same time.
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Although the inode is marked as clean when it is being deleted,
it might stay and be used as orphan, and be marked as dirty.
So we have to free the budget when we delete it.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
The 'ubifs_release_dirty_inode_budget()' was buggy and incorrectly
freed the budget, which led to not freeing all dirty data budget.
This patch fixes that.
Also, this patch fixes ubifs_mkdir() which passed 1 in dirty_ino_d,
which makes no sense. Well, it is harmless though.
Also, add few more useful assertions. And improve few debugging
messages.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
We encouredge people to mount using volume name, not device
numbers. So print the name of the mounted UBI volume, not just
IDs.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
The ticket allocation code got reworked in 2.6.26 and we now free tickets
whereas before we used to cache them so the use-after-free went
undetected.
SGI-PV: 985525
SGI-Modid: xfs-linux-melb:xfs-kern:31877a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Use KM_NOFS to prevent recursion back into the filesystem which can cause
deadlocks.
In the case of xfs_iread() we hold the lock on the inode cluster buffer
while allocating memory for the trace buffers. If we recurse back into XFS
to flush data that may require a transaction to allocate extents which
needs log space. This can deadlock with the xfsaild thread which can't
push the tail of the log because it is trying to get the inode cluster
buffer lock.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31838a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Use KM_MAYFAIL for the m_perag allocation, we can deal with the error
easily and blocking forever during mount is not a good idea either.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31837a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_mount_free mostly frees the perag data, which is something that is
duplicated in the mount error path.
Move the XFS_QM_DONE call to the caller and remove the useless
mutex_destroy/spinlock_destroy calls so that we can re-use it for the
mount error path. Also rename it to xfs_free_perag to reflect what it
does.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31836a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_readsb is called before xfs_mount so xfs_freesb should be called after
xfs_unmountfs, too. This means it now happens after a few things during
the of xfs_unmount which all have nothing to do with the superblock.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31835a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_unmounts can't and shouldn't return errors so declare it as returning
void.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31833a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Remove all the useless flags and code keyed off it in xfs_mountfs.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31831a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The root inode is allocated in xfs_mountfs so it should be release in
xfs_unmountfs. For the unmount case that means we do it after the the
xfs_sync(mp, SYNC_WAIT | SYNC_CLOSE) in the forced shutdown case and the
dmapi unmount event. Note that both reference the rip variable which might
be freed by that time in case inode flushing has kicked in, so strictly
speaking this might count as a bug fix
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31830a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_ichtime updates the xfs_inode and Linux inode timestamps just fine, no
need to call file_update_time and then copy the values over to the XFS
inode. The only additional thing in file_update_time are checks not
applicable to the write path.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31829a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Port a little optmization from file_update_time to xfs_ichgtime, and only
update the timestamp and mark the inode dirty if the timestamp actually
changes in the timer tick resultion supported by the running kernel.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31827a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
In xfs_ialloc we just want to set all timestamps to the current time. We
don't need to mark the inode dirty like xfs_ichgtime does, and we don't
need nor want the opimizations in xfs_ichgtime that I will introduce in
the next patch.
So just opencode the timestamp update in xfs_ialloc, and remove the new
unused XFS_ICHGTIME_ACC case in xfs_ichgtime.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31825a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Now that all users of the sema_t are gone from XFS we can finally kill it.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31823a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Use the new completion flush code to implement the dquot flush lock.
Removes one of the final users of semaphores in the XFS code base.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31822a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Use the new completion flush code to implement the inode flush lock.
Removes one of the final users of semaphores in the XFS code base.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31817a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The xfs_buf_t b_iodonesema is really just a semaphore that wants to be a
completion. Change it to a completion and remove the last user of the
sema_t from XFS.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31815a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
A lot of code has been converted away from semaphores, but there are still
comments that reference semaphore behaviour. The log code is the worst
offender. Update the comments to reflect what the code really does now.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31814a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The alloc and inobt btree use the same agbp/agno pair in the btree_cur
union. Make them use the same bc_private.a union member so that code for
these two short form btree implementations can be shared.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31788a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Sanitize setting up the Linux indode.
Setting up the xfs_inode <-> inode link is opencoded in xfs_iget_core now
because that's the only place it needs to be done, xfs_initialize_vnode is
renamed to xfs_setup_inode and loses all superflous paramaters. The check
for I_NEW is removed because it always is true and the di_mode check moves
into xfs_iget_core because it's only needed there.
xfs_set_inodeops and xfs_revalidate_inode are merged into xfs_setup_inode
and the whole things is moved into xfs_iops.c where it belongs.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31782a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
All remaining bhv_vnode_t instance are in code that's more or less Linux
specific. (Well, for xfs_acl.c that could be argued, but that code is on
the removal list, too). So just do an s/bhv_vnode_t/struct inode/ over the
whole tree. We can clean up variable naming and some useless helpers
later.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31781a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
In various places we can just move a VFS_I call into the argument list of
called functions/macros instead of having a local bhv_vnode_t.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31776a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
When multiple inodes are locked in XFS it happens in order of the inode
number, with the everything but the first inode trylocked if any of the
previous inodes is in the AIL.
Except for the sorting of the inodes this logic is implemented in
xfs_lock_inodes, but also partially duplicated in xfs_lock_dir_and_entry
in a particularly stupid way adds a lock roundtrip if the inode ordering
is not optimal.
This patch adds a new helper xfs_lock_two_inodes that takes two inodes and
locks them in the most optimal way according to the above locking protocol
and uses it for all places that want to lock two inodes.
The only caller of xfs_lock_inodes is xfs_rename which might lock up to
four inodes.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31772a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
All the error injection is already enabled through ifdef DEBUG, so kill
the never set second cpp symbol to activate it without the rest of the
debugging infrastructure.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31771a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Now that all direct calls to VN_HOLD/VN_RELE are gone we can implement
IHOLD/IRELE directly.
For the IHOLD case also replace igrab with a direct increment of i_count
because we are guaranteed to already have a live and referenced inode by
the VFS. Also remove the vn_hold statistic because it's been rather
meaningless for some time with most references done by other callers.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31764a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
All the ACL routines are called from inode operations which are guaranteed
to have a referenced inode by the VFS, so there's no need for the ACL code
to grab another temporary one.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31763a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
bhv_vnode_t is just a typedef for struct inode, so there's
no need for a helper to convert between the two.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31761a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
bhv_vnode_t is just a typedef for struct inode, so there's
no need for a helper to convert between the two.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31760a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Looks like somehow xfs got missed in the conversion that took place in
e231c2ee64, "Convert ERR_PTR(PTR_ERR(p))
instances to ERR_CAST(p)
<http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit
diff;h=e231c2ee64eb1c5cd3c63c31da9dac7d888dcf7f>"
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31757a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Thanks to hch's endian work, INT_GET etc are no longer used, and may as
well be removed. INT_SET is still used in the acl code, though.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31756a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Move it from the attr code to the transaction code and make
the attr code call the new function.
We rolltrans is really usefull whenever we want to use rolling
transaction, should be generic, it isn't dependent on any part
of the attr code anyway.
We use this excuse to change all the:
if ((error = xfs_attr_rolltrans()))
calls into:
error = xfs_trans_roll();
if (error)
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31729a
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Add a helper to free the m_fsname/m_rtname/m_logname allocations and use
it properly for all mount failure cases. Also switch the allocations for
these to kstrdup while we're at it.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31728a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
We will need that to be able to calculate the size of log we need for a
specific attr (for Create+EA). The local flag is needed so that we can
fail if we run into ENOSPC when trying to alloc blocks.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31727a
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
If we allow incore extent tree allocations to recurse into the
filesystem under memory pressure, new delayed allocations through
xfs_iomap_write_delay() can deadlock on themselves if memory
reclaim tries to write back dirty pages from that inode.
It will deadlock in xfs_iomap_write_allocate() trying to take the
ilock we already hold. This can also show up as complex ABBA deadlocks
when multiple threads are triggering memory reclaim when trying to
allocate extents.
The main cause of this is the fact that delayed allocation is not done in
a transaction, so KM_NOFS is not automatically added to the allocations to
prevent this recursion.
Mark all allocations done for the incore inode extent tree as KM_NOFS to
ensure they never recurse back into the filesystem.
Version 2: o KM_NOFS implies KM_SLEEP, so just use KM_NOFS
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31726a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_vtoi() is redundant and only unsed in small sections of code.
Replace them with widely used XFS_I() inline and kill xfs_vtoi().
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31725a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
In several places we directly convert from the XFS inode
to the linux (VFS) inode by a simple deference of ip->i_vnode.
We should not do this - a helper function should be used to
extract the VFS inode from the XFS inode.
Introduce the function VFS_I() to extract the VFS inode
from the XFS inode. The name was chosen to match XFS_I() which
is used to extract the XFS inode from the VFS inode.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31720a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
We should not access a buffer after dropping it's reference count
otherwise we could race with another thread that releases the final
reference count and frees the buffer causing us to access potentially
unmapped memory. The bug this change fixes only occured on DEBUG XFS since
the offending code was in an ASSERT.
SGI-PV: 984429
SGI-Modid: xfs-linux-melb:xfs-kern:31715a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
This keeps xfs_lowbit64 as it was since there aren't good generic helpers
there ... Patch inspired by Andi Kleen.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31472a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Short enough reads from /proc/irq/*/smp_affinity return -EINVAL for no
good reason.
This became noticed with NR_CPUS=4096 patches, when length of printed
representation of cpumask becase 1152, but cat(1) continued to read with
1024-byte chunks. bitmap_scnprintf() in good faith fills buffer, returns
1023, check returns -EINVAL.
Fix it by switching to seq_file, so handler will just fill buffer and
doesn't care about offsets, length, filling EOF and all this crap.
For that add seq_bitmap(), and wrappers around it -- seq_cpumask() and
seq_nodemask().
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Paul Jackson <pj@sgi.com>
Cc: Mike Travis <travis@sgi.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This provides a FLAT_PLAT_INIT() arch hook for platforms that need to set
up specific register state prior to calling in to the process, as per
ELF_PLAT_INIT().
Signed-off-by: Takashi YOSHII <yoshii.takashi@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
the names were too generic:
drivers/uio/uio.c:87: error: expected identifier or '(' before 'do'
drivers/uio/uio.c:87: error: expected identifier or '(' before 'while'
drivers/uio/uio.c:113: error: 'map_release' undeclared here (not in a function)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Most the free-standing lock_acquire() usages look remarkably similar, sweep
them into a new helper.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
[CIFS] list entry can not return null
turn cifs_setattr into a multiplexor that calls the correct function
move file time and dos attribute setting logic into new function
spin off cifs_setattr with unix extensions to its own function
[CIFS] Code cleanup in old sessionsetup code
[CIFS] cifs_mkdir and cifs_create should respect the setgid bit on parent dir
Rename CIFSSMBSetFileTimes to CIFSSMBSetFileInfo and add PID arg
change CIFSSMBSetTimes to CIFSSMBSetPathInfo
[CIFS] fix trailing whitespace
bundle up Unix SET_PATH_INFO args into a struct and change name
Fix missing braces in cifs_revalidate()
remove locking around tcpSesAllocCount atomic variable
[CIFS] properly account for new user= field in SPNEGO upcall string allocation
[CIFS] remove level of indentation from decode_negTokenInit
[CIFS] cifs send2 not retrying enough in some cases on full socket
[CIFS] oid should also be checked against class in cifs asn
There doesn't seem to be a compelling reason why nfsd4_op_name() is
marked as "inline":
It's only used in a dprintk(), and as long as it has only one caller
non-ancient gcc versions anyway inline it automatically.
This patch fixes the following compile error with gcc 3.4:
...
CC fs/nfsd/nfs4proc.o
nfs4proc.c: In function `nfsd4_proc_compound':
nfs4proc.c:854: sorry, unimplemented: inlining failed in call to
nfs4proc.c:897: sorry, unimplemented: called from here
make[3]: *** [fs/nfsd/nfs4proc.o] Error 1
Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
[ Also made it "const char *" - Linus]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Break up cifs_setattr further by moving the logic that sets file times
and dos attributes into a separate function. This patch also refactors
the logic a bit so that when the file is already open then we go ahead
and do a SetFileInfo call. SetPathInfo seems to be unreliable when
setting times on open files.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Create a new cifs_setattr_unix function to handle a setattr when unix
extensions are enabled and have cifs_setattr call it. Also, clean up
variable declarations in cifs_setattr.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Since introduced in 7ba1ba12ee, it should be made use of.
Signed-off-by: Denis ChengRq <crquan@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
If a server supports unix extensions but does not support POSIX create
routines, then the client will create a new inode with a standard SMB
mkdir or create/open call and then will set the mode. When it does this,
it does not take the setgid bit on the parent directory into account.
This patch has CIFS flip on the setgid bit when the parent directory has
it. If the share is mounted with "setuids" then also change the group
owner to the gid of the parent.
This patch should apply cleanly on top of the setattr cleanup patches
that I sent a few weeks ago.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
The new name is more clear since this is also used to set file
attributes. We'll need the pid_of_opener arg so that we can
pass in filehandles of other pids and spare ourselves an open
call.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
CIFSSMBSetTimes is a deceptive name. This function does more that just
set file times. Change it to CIFSSMBSetPathInfo, which is closer to its
real purpose.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
We'd like to be able to use the unix SET_PATH_INFO_BASIC args to set
file times as well, but that makes the argument list rather long. Bundle
up the args for unix SET_PATH_INFO call into a struct. For now, we don't
actually use the times fields anywhere. That will be done in a follow-on
patch.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
proc: fix warnings
fs/proc/base.c:2429: warning: format '%llu' expects type 'long long unsigned int', but argument 3 has type 'u64'
fs/proc/base.c:2429: warning: format '%llu' expects type 'long long unsigned int', but argument 4 has type 'u64'
fs/proc/base.c:2429: warning: format '%llu' expects type 'long long unsigned int', but argument 5 has type 'u64'
fs/proc/base.c:2429: warning: format '%llu' expects type 'long long unsigned int', but argument 6 has type 'u64'
fs/proc/base.c:2429: warning: format '%llu' expects type 'long long unsigned int', but argument 7 has type 'u64'
fs/proc/base.c:2429: warning: format '%llu' expects type 'long long unsigned int', but argument 8 has type 'u64'
fs/proc/base.c:2429: warning: format '%llu' expects type 'long long unsigned int', but argument 9 has type 'u64'
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Acked-by: Andrea Righi <righi.andrea@gmail.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fs/omfs/inode.c:495: warning: format '%llx' expects type 'long long
unsigned int', but argument 2 has type 'u64'
fs/omfs/inode.c:495: warning: format '%llx' expects type 'long
long unsigned int', but argument 3 has type '__be64'
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Acked-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix missing braces introduced during commit
cea218054a. Though setting wbrc to 0
keeps this from causing real bug, this should have been there.
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Like the page lock change, this also requires name change, so convert the
raw test_and_set bitop to a trylock.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Converting page lock to new locking bitops requires a change of page flag
operation naming, so we might as well convert it to something nicer
(!TestSetPageLocked_Lock => trylock_page, SetPageLocked => set_page_locked).
This also facilitates lockdeping of page lock.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit f9247273cb (and
fb2e405fc1 - "fix fs/nfs/nfsroot.c
compilation" - that fixed a missed conversion).
The changes cause problems for at least the sparc build. Let's re-do
them when the exact issues are resolved.
Requested-by: Andrew Morton <akpm@linux-foundation.org>
Requested-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The global tcpSesAllocCount variable is an atomic already and doesn't
really need the extra locking around it. Remove the locking and just use
the atomic_inc_return and atomic_dec_return functions to make sure we
access it correctly.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: remove write-only variables from ext4_ordered_write_end
ext4: unexport jbd2_journal_update_superblock
ext4: Cleanup whitespace and other miscellaneous style issues
ext4: improve ext4_fill_flex_info() a bit
ext4: Cleanup the block reservation code path
ext4: don't assume extents can't cross block groups when truncating
ext4: Fix lack of credits BUG() when deleting a badly fragmented inode
ext4: Fix ext4_ext_journal_restart()
ext4: fix ext4_da_write_begin error path
jbd2: don't abort if flushing file data failed
ext4: don't read inode block if the buffer has a write error
ext4: Don't allow lg prealloc list to be grow large.
ext4: Convert the usage of NR_CPUS to nr_cpu_ids.
ext4: Improve error handling in mballoc
ext4: lock block groups when initializing
ext4: sync up block and inode bitmap reading functions
ext4: Allow read/only mounts with corrupted block group checksums
ext4: Fix data corruption when writing to prealloc area
The variables 'from' and 'to' are not used anywhere.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
FAT has to handle the newly introduced ATTR_TIMES_SET for allow_utime
option.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-pull: (64 commits)
[XFS] Remove vn_revalidate calls in xfs.
[XFS] Now that xfs_setattr is only used for attributes set from ->setattr
[XFS] xfs_setattr currently doesn't just handle the attributes set through
[XFS] fix use after free with external logs or real-time devices
[XFS] A bug was found in xfs_bmap_add_extent_unwritten_real(). In a
[XFS] fix compilation without CONFIG_PROC_FS
[XFS] s/XFS_PURGE_INODE/IRELE/g s/VN_HOLD(XFS_ITOV())/IHOLD()/
[XFS] fix mount option parsing in remount
[XFS] Disable queue flag test in barrier check.
[XFS] streamline init/exit path
[XFS] Fix up problem when CONFIG_XFS_POSIX_ACL is not set and yet we still
[XFS] Don't assert if trying to mount with blocksize > pagesize
[XFS] Don't update mtime on rename source
[XFS] Allow xfs_bmbt_split() to fallback to the lowspace allocator
[XFS] Restore the lowspace extent allocator algorithm
[XFS] use minleft when allocating in xfs_bmbt_split()
[XFS] attrmulti cleanup
[XFS] Check for invalid flags in xfs_attrlist_by_handle.
[XFS] Fix CI lookup in leaf-form directories
[XFS] Use the generic xattr methods.
...
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
[PATCH] ocfs2: Release mutex in error handling code
[PATCH] ocfs2: Fix oops when racing files truncates with writes into an mmap region
[PATCH 2/2] ocfs2: Fix race between mount and recovery
[PATCH 1/2] ocfs2: Add counter in struct ocfs2_dinode to track journal replays
[PATCH] configfs: Convenience macros for attribute definition.
[PATCH] configfs: Pin configfs subsystems separately from new config_items.
[PATCH] configfs: Fix open directory making rmdir() fail
[PATCH] configfs: Lock new directory inodes before removing on cleanup after failure
[PATCH] configfs: Prevent userspace from creating new entries under attaching directories
[PATCH] configfs: Fix failing symlink() making rmdir() fail
[PATCH] configfs: Fix symlink() to a removing item
[PATCH] configfs: Include linux/err.h in linux/configfs.h
* git://git.infradead.org/mtd-2.6:
[MTD] [NAND] drivers/mtd/nand/nandsim.c: fix printk warnings
[MTD] [NAND] Blackfin NFC Driver: Cleanup the error exit path of bf5xx_nand_probe function
[MTD] [NAND] Blackfin NFC Driver: use standard dev_err() rather than printk()
[MTD] [NAND] Blackfin NFC Driver: enable Blackfin nand HWECC support by default
[MTD] [NAND] Blackfin NFC Driver: add proper devinit/devexit markings to probe/remove functions
[MTD] [NAND] Blackfin NFC Driver: add support for the ECC layout the Blackfin bootrom uses
[MTD] [NAND] Blackfin NFC Driver: fix bug - hw ecc calc by making sure we extract 11 bits from each register instead of 10
[MTD] [NAND] Blackfin NFC Driver: fix bug - do not clobber the status from the first 256 bytes if operating on 512 pages
[MTD] [NAND] diskonchip.c fix sparse endian warnings
[MTD] [NAND] drivers/mtd/nand/nandsim.c needs div64.h
[JFFS2] Fix allocation of summary buffer
Fix rename of at91_nand -> atmel_nand
[MTD] [NOR] drivers/mtd/chips/jedec_probe.c: fix Am29DL800BB device ID
[MTD] MTD_DEBUG always does compile-time typechecks
[MTD] DataFlash: bugfix, binary page sizes now handled
[MTD] [NAND] fsl_elbc_nand.c: fix printk warning
[MTD] [NAND] nandsim: support random page read command
[MTD] [NAND] fix subpage read for small page NAND
...it doesn't look like it's being accounted for at the moment. Also
try to reorganize the calculation to make it a little more evident
what each piece means.
This should probably go to the stable series as well...
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
proc doesn't use "associate pointer with id" feature of IDR, so switch
to IDA.
NOTE, NOTE, NOTE:
Do not apply if release_inode_number() still mantions MAX_ID_MASK!
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Id which proc gets from IDR for inode number and id which proc removes
from IDR do not match. E.g. 0x11a transforms into 0x8000011a.
Which stayed unnoticed for a long time because, surprise, idr_remove()
masks out that high bit before doing anything.
All of this due to "| ~MAX_ID_MASK" in release_inode_number().
I still don't understand how it's supposed to work, because "| ~MASK"
is not an inversion for "& MAX" operation.
So, use just one nice, working addition. Make start offset unsigned int,
while I'm at it. It's longness is not used anywhere.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* new helper: vfs_quota_on_path(); equivalent of vfs_quota_on() sans the
pathname resolution.
* callers of vfs_quota_on() that do their own pathname resolution and
checks based on it are switched to vfs_quota_on_path(); that way we
avoid the races.
* reiserfs leaked dentry/vfsmount references on several failure exits.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
New primitive: alloc_fd(start, flags). get_unused_fd() and
get_unused_fd_flags() become wrappers on top of it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
for July 17: early crash on x86-64)
SELinux needs MAY_APPEND to be passed down to the security hook.
Otherwise, we get permission denials when only append permission is
granted by policy even if the opening process specified O_APPEND.
Shows up as a regression in the ltp selinux testsuite, fixed by
this patch.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We can't use vmalloc for the buffer we use for writing summaries,
because some drivers may want to DMA from it. So limit the size to 64KiB
and use kmalloc for it instead.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
The mutex is released on a successful return, so it would seem that it
should be released on an error return as well.
The semantic patch finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@@
expression l;
@@
mutex_lock(l);
... when != mutex_unlock(l)
when any
when strict
(
if (...) { ... when != mutex_unlock(l)
+ mutex_unlock(l);
return ...;
}
|
mutex_unlock(l);
)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This patch fixes an oops that is reproduced when one races writes to a mmap-ed
region with another process truncating the file.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
As the fs recovery is asynchronous, there is a small chance that another
node can mount (and thus recover) the slot before the recovery thread
gets to it.
If this happens, the recovery thread will block indefinitely on the
journal/slot lock as that lock will be held for the duration of the mount
(by design) by the node assigned to that slot.
The solution implemented is to keep track of the journal replays using
a recovery generation in the journal inode, which will be incremented by the
thread replaying that journal. The recovery thread, before attempting the
blocking lock on the journal/slot lock, will compare the generation on disk
with what it has cached and skip recovery if it does not match.
This bug appears to have been inadvertently introduced during the mount/umount
vote removal by mainline commit 34d024f843. In the
mount voting scheme, the messaging would indirectly indicate that the slot
was being recovered.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This patch renames the ij_pad to ij_recovery_generation in struct ocfs2_dinode.
This will be used to keep count of journal replays after an unclean shutdown.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
configfs_mkdir() creates a new item by calling its parent's
->make_item/group() functions. Once that object is created,
configfs_mkdir() calls try_module_get() on the new item's module. If it
succeeds, the module owning the new item cannot be unloaded, and
configfs is safe to reference the item.
If the item and the subsystem it belongs to are part of the same module,
the subsystem is also pinned. This is the common case.
However, if the subsystem is made up of multiple modules, this may not
pin the subsystem. Thus, it would be possible to unload the toplevel
subsystem module while there is still a child item. Thus, we now
try_module_get() the subsystem's module. This only really affects
children of the toplevel subsystem group. Deeper children already have
their parents pinned.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
When checking for user-created elements under an item to be removed by rmdir(),
configfs_detach_prep() counts fake configfs_dirents created by dir_open() as
user-created and fails when finding one. It is however perfectly valid to remove
a directory that is open.
Simply make configfs_detach_prep() skip fake configfs_dirent, like it already
does for attributes, and like detach_groups() does.
Signed-off-by: Louis Rilling <louis.rilling@kerlabs.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Once a new configfs directory is created by configfs_attach_item() or
configfs_attach_group(), a failure in the remaining initialization steps leads
to removing a directory which inode the VFS may have already accessed.
This commit adds the necessary inode locking to safely remove configfs
directories while cleaning up after a failure. As an advantage, the locking
rules of populate_groups() and detach_groups() become the same: the caller must
have the group's inode mutex locked.
Signed-off-by: Louis Rilling <louis.rilling@kerlabs.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
process 1: process 2:
configfs_mkdir("A")
attach_group("A")
attach_item("A")
d_instantiate("A")
populate_groups("A")
mutex_lock("A")
attach_group("A/B")
attach_item("A")
d_instantiate("A/B")
mkdir("A/B/C")
do_path_lookup("A/B/C", LOOKUP_PARENT)
ok
lookup_create("A/B/C")
mutex_lock("A/B")
ok
configfs_mkdir("A/B/C")
ok
attach_group("A/C")
attach_item("A/C")
d_instantiate("A/C")
populate_groups("A/C")
mutex_lock("A/C")
attach_group("A/C/D")
attach_item("A/C/D")
failure
mutex_unlock("A/C")
detach_groups("A/C")
nothing to do
mkdir("A/C/E")
do_path_lookup("A/C/E", LOOKUP_PARENT)
ok
lookup_create("A/C/E")
mutex_lock("A/C")
ok
configfs_mkdir("A/C/E")
ok
detach_item("A/C")
d_delete("A/C")
mutex_unlock("A")
detach_groups("A")
mutex_lock("A/B")
detach_group("A/B")
detach_groups("A/B")
nothing since no _default_ group
detach_item("A/B")
mutex_unlock("A/B")
d_delete("A/B")
detach_item("A")
d_delete("A")
Two bugs:
1/ "A/B/C" and "A/C/E" are created, but never removed while their parent are
removed in the end. The same could happen with symlink() instead of mkdir().
2/ "A" and "A/C" inodes are not locked while detach_item() is called on them,
which may probably confuse VFS.
This commit fixes 1/, tagging new directories with CONFIGFS_USET_CREATING before
building the inode and instantiating the dentry, and validating the whole
group+default groups hierarchy in a second pass by clearing
CONFIGFS_USET_CREATING.
mkdir(), symlink(), lookup(), and dir_open() simply return -ENOENT if
called in (or linking to) a directory tagged with CONFIGFS_USET_CREATING. This
does not prevent userspace from calling stat() successfuly on such directories,
but this prevents userspace from adding (children to | symlinking from/to |
read/write attributes of | listing the contents of) not validated items. In
other words, userspace will not interact with the subsystem on a new item until
the new item creation completes correctly.
It was first proposed to re-use CONFIGFS_USET_IN_MKDIR instead of a new
flag CONFIGFS_USET_CREATING, but this generated conflicts when checking the
target of a new symlink: a valid target directory in the middle of attaching
a new user-created child item could be wrongly detected as being attached.
2/ is fixed by next commit.
Signed-off-by: Louis Rilling <louis.rilling@kerlabs.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
On a similar pattern as mkdir() vs rmdir(), a failing symlink() may make rmdir()
fail for the symlink's parent and the symlink's target as well.
failing symlink() making target's rmdir() fail:
process 1: process 2:
symlink("A/S" -> "B")
allow_link()
create_link()
attach to "B" links list
rmdir("B")
detach_prep("B")
error because of new link
configfs_create_link("A", "S")
error (eg -ENOMEM)
failing symlink() making parent's rmdir() fail:
process 1: process 2:
symlink("A/D/S" -> "B")
allow_link()
create_link()
attach to "B" links list
configfs_create_link("A/D", "S")
make_dirent("A/D", "S")
rmdir("A")
detach_prep("A")
detach_prep("A/D")
error because of "S"
create("S")
error (eg -ENOMEM)
We cannot use the same solution as for mkdir() vs rmdir(), since rmdir() on the
target cannot wait on the i_mutex of the new symlink's parent without risking a
deadlock (with other symlink() or sys_rename()). Instead we define a global
mutex protecting all configfs symlinks attachment, so that rmdir() can avoid the
races above.
Signed-off-by: Louis Rilling <louis.rilling@kerlabs.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
The rule for configfs symlinks is that symlinks always point to valid
config_items, and prevent the target from being removed. However,
configfs_symlink() only checks that it can grab a reference on the target item,
without ensuring that it remains alive until the symlink is correctly attached.
This patch makes configfs_symlink() fail whenever the target is being removed,
using the CONFIGFS_USET_DROPPING flag set by configfs_detach_prep() and
protected by configfs_dirent_lock.
This patch introduces a similar (weird?) behavior as with mkdir failures making
rmdir fail: if symlink() races with rmdir() of the parent directory (or its
youngest user-created ancestor if parent is a default group) or rmdir() of the
target directory, and then fails in configfs_create(), this can make the racing
rmdir() fail despite the concerned directory having no user-created entry (resp.
no symlink pointing to it or one of its default groups) in the end.
This behavior is fixed in later patches.
Signed-off-by: Louis Rilling <louis.rilling@kerlabs.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
We now use PTR_ERR() in the ->make_item() and ->make_group() operations.
Folks including configfs.h need err.h.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Most of this function takes place inside of an unnecessary "else"
clause. The other 2 cases both return 0, so we can remove some
indentation here.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
We zero-fill them like we are supposed to, and that's all fine. It's
only an error if the 'romfs_copyfrom()' routine isn't able to fill the
data that is supposed to be there.
Most of the patch is really just re-organizing the code a bit, and using
separate variables for the error value and for how much of the page we
actually filled from the filesystem.
Reported-and-tested-by: Chris Fester <cfester@wms.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Matt Waddel <matt.waddel@freescale.com>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-of-by: Linus Torvalds <torvalds@linux-foundation.org>
Once clp is assigned, it never becomes NULL, so we can make a label for it
in the error handling code. Because the call to path_lookup follows the
call to auth_domain_find, its error handling code should jump to this new
label.
The semantic match that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@r@
expression x,E;
statement S;
position p1,p2,p3;
@@
(
if ((x = auth_domain_find@p1(...)) == NULL || ...) S
|
x = auth_domain_find@p1(...)
... when != x
if (x == NULL || ...) S
)
<...
if@p3 (...) { ... when != auth_domain_put(x)
when != if (x) { ... auth_domain_put(x); ...}
return@p2 ...;
}
...>
(
return x;
|
return 0;
|
x = E
|
E = x
|
auth_domain_put(x)
)
@exists@
position r.p1,r.p2,r.p3;
expression x;
int ret != 0;
statement S;
@@
* x = auth_domain_find@p1(...)
<...
* if@p3 (...)
S
...>
* return@p2 \(NULL\|ret\);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Uninline the __remove_assoc_queue() function in fs/buffer.c, called at too
many places and too long to really be inlined. Size results:
text data bss dec hex filename
1134606 118840 212992 1466438 166046 vmlinux.old
1134303 118840 212992 1466135 165f17 vmlinux
-303 0 0 -303 -12F +/-
This patch is part of the Linux Tiny project and has been originally
written by Matt Mackall <mpm@selenic.com>.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Missing cpu_to_be64 on some constant assignments.
fs/omfs/dir.c:107:16: warning: incorrect type in assignment (different base types)
fs/omfs/dir.c:107:16: expected restricted __be64 [usertype] i_sibling
fs/omfs/dir.c:107:16: got unsigned long long
fs/omfs/file.c:33:13: warning: incorrect type in assignment (different base types)
fs/omfs/file.c:33:13: expected restricted __be64 [usertype] e_next
fs/omfs/file.c:33:13: got unsigned long long
fs/omfs/file.c:36:24: warning: incorrect type in assignment (different base types)
fs/omfs/file.c:36:24: expected restricted __be64 [usertype] e_cluster
fs/omfs/file.c:36:24: got unsigned long long
fs/omfs/file.c:37:23: warning: incorrect type in assignment (different base types)
fs/omfs/file.c:37:23: expected restricted __be64 [usertype] e_blocks
fs/omfs/file.c:37:23: got unsigned long long
fs/omfs/bitmap.c:74:18: warning: incorrect type in argument 2 (different signedness)
fs/omfs/bitmap.c:74:18: expected unsigned long volatile *addr
fs/omfs/bitmap.c:74:18: got long *<noident>
fs/omfs/bitmap.c:77:20: warning: incorrect type in argument 2 (different signedness)
fs/omfs/bitmap.c:77:20: expected unsigned long volatile *addr
fs/omfs/bitmap.c:77:20: got long *<noident>
fs/omfs/bitmap.c:112:17: warning: incorrect type in argument 2 (different signedness)
fs/omfs/bitmap.c:112:17: expected unsigned long volatile *addr
fs/omfs/bitmap.c:112:17: got long *<noident>
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit:
commit ba52de123d
Author: Theodore Ts'o <tytso@mit.edu>
Date: Wed Sep 27 01:50:49 2006 -0700
[PATCH] inode-diet: Eliminate i_blksize from the inode structure
caused the block size used by pseudo-filesystems to decrease from
PAGE_SIZE to 1024 leading to a doubling of the number of context switches
during a kernbench run.
Signed-off-by: Alex Nixon <Alex.Nixon@citrix.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ian Campbell <Ian.Campbell@eu.citrix.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are cases in which, on a full socket which requires retry on
sending data by the app (cifs in this case), that we were not
retrying since we did not reinitialize a counter.
This fixes the retry logic to retry up to 15 seconds on stuck
sockets.
Signed-off-by: Shirish Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
The oid coming back from asn1_header_decode is a primitive object so
class should be checked to be universal.
Acked-by: Love Hörnquist Åstrand <lha@kth.se>
Signed-off-by: Steve French <sfrench@us.ibm.com>
With SLUB debugging turned on in 2.6.26, I was getting memory corruption
when testing eCryptfs. The root cause turned out to be that eCryptfs was
doing kmalloc(PAGE_CACHE_SIZE); virt_to_page() and treating that as a nice
page-aligned chunk of memory. But at least with SLUB debugging on, this
is not always true, and the page we get from virt_to_page does not
necessarily match the PAGE_CACHE_SIZE worth of memory we got from kmalloc.
My simple testcase was 2 loops doing "rm -f fileX; cp /tmp/fileX ." for 2
different multi-megabyte files. With this change I no longer see the
corruption.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: Michael Halcrow <mhalcrow@us.ibm.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I got section mismatch message about bio_integrity_init_slab().
WARNING: fs/built-in.o(__ksymtab+0xb60): Section mismatch in reference from the variable __ksymtab_bio_integrity_init_slab to the function .init.text:bio_integrity_init_slab()
The symbol bio_integrity_init_slab is exported and annotated __init Fix
this by removing the __init annotation of bio_integrity_init_slab or drop
the export.
It only call from init_bio(). The EXPORT_SYMBOL() can be removed.
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When we read some part of a file through pagecache, if there is a
pagecache of corresponding index but this page is not uptodate, read IO
is issued and this page will be uptodate.
I think this is good for pagesize == blocksize environment but there is
room for improvement on pagesize != blocksize environment. Because in
this case a page can have multiple buffers and even if a page is not
uptodate, some buffers can be uptodate.
So I suggest that when all buffers which correspond to a part of a file
that we want to read are uptodate, use this pagecache and copy data from
this pagecache to user buffer even if a page is not uptodate. This can
reduce read IO and improve system throughput.
I wrote a benchmark program and got result number with this program.
This benchmark do:
1: mount and open a test file.
2: create a 512MB file.
3: close a file and umount.
4: mount and again open a test file.
5: pwrite randomly 300000 times on a test file. offset is aligned
by IO size(1024bytes).
6: measure time of preading randomly 100000 times on a test file.
The result was:
2.6.26
330 sec
2.6.26-patched
226 sec
Arch:i386
Filesystem:ext3
Blocksize:1024 bytes
Memory: 1GB
On ext3/4, a file is written through buffer/block. So random read/write
mixed workloads or random read after random write workloads are optimized
with this patch under pagesize != blocksize environment. This test result
showed this.
The benchmark program is as follows:
#include <stdio.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
#include <time.h>
#include <stdlib.h>
#include <string.h>
#include <sys/mount.h>
#define LEN 1024
#define LOOP 1024*512 /* 512MB */
main(void)
{
unsigned long i, offset, filesize;
int fd;
char buf[LEN];
time_t t1, t2;
if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) {
perror("cannot mount\n");
exit(1);
}
memset(buf, 0, LEN);
fd = open("/root/test1/testfile", O_CREAT|O_RDWR|O_TRUNC);
if (fd < 0) {
perror("cannot open file\n");
exit(1);
}
for (i = 0; i < LOOP; i++)
write(fd, buf, LEN);
close(fd);
if (umount("/root/test1/") < 0) {
perror("cannot umount\n");
exit(1);
}
if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) {
perror("cannot mount\n");
exit(1);
}
fd = open("/root/test1/testfile", O_RDWR);
if (fd < 0) {
perror("cannot open file\n");
exit(1);
}
filesize = LEN * LOOP;
for (i = 0; i < 300000; i++){
offset = (random() % filesize) & (~(LEN - 1));
pwrite(fd, buf, LEN, offset);
}
printf("start test\n");
time(&t1);
for (i = 0; i < 100000; i++){
offset = (random() % filesize) & (~(LEN - 1));
pread(fd, buf, LEN, offset);
}
time(&t2);
printf("%ld sec\n", t2-t1);
close(fd);
if (umount("/root/test1/") < 0) {
perror("cannot umount\n");
exit(1);
}
}
Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jan Kara <jack@ucw.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix compilation errors on avr32 and without CONFIG_SWAP, introduced by
ba92a43dba ("exec: remove some includes")
In file included from include/asm/tlb.h:24,
from fs/exec.c:55:
include/asm-generic/tlb.h: In function 'tlb_flush_mmu':
include/asm-generic/tlb.h:76: error: implicit declaration of function 'release_pages'
include/asm-generic/tlb.h: In function 'tlb_remove_page':
include/asm-generic/tlb.h:105: error: implicit declaration of function 'page_cache_release'
make[1]: *** [fs/exec.o] Error 1
This straightforward part-revert is nobody's favourite patch to address
the underlying tlb.h needs swap.h needs pagemap.h (but sparc won't like
that) mess; but appropriate to fix the build now before any overhaul.
Reported-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Reported-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Tested-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
dlm: fix uninitialized variable for search_rsb_list callers
dlm: release socket on error
dlm: fix basts for granted CW waiting PR/CW
dlm: check for null in device_write
While implementing binfmt_elf_fdpic on SH it quickly became apparent
that SH was the first platform to support both binfmt_elf_fdpic and
binfmt_elf, as well as the only of the FDPIC platforms to make use of the
auxvt.
Currently binfmt_elf_fdpic uses a special version of NEW_AUX_ENT() where
the first argument is the entry displacement after csp has been adjusted,
being reset after each adjustment. As we have no ability to sort this out
through the platform's ARCH_DLINFO, this index needs to be managed
entirely in create_elf_fdpic_tables(). Presently none of the platforms
that set their own auxvt entries are able to do so through their
respective ARCH_DLINFOs when using binfmt_elf_fdpic.
In addition to this, binfmt_elf_fdpic has been looking at
DLINFO_ARCH_ITEMS for the number of architecture-specific entries in the
auxvt. This is legacy cruft, and is not defined by any platforms in-tree,
even those that make heavy use of the auxvt. AT_VECTOR_SIZE_ARCH is
always available, and contains the number that is of interest here, so we
switch to using that unconditionally as well.
As this has direct bearing on how much stack is used, platforms that have
configurable (or dynamically adjustable) NEW_AUX_ENT calls need to either
make AT_VECTOR_SIZE_ARCH more fine-grained, or leave it as a worst-case
and live with some lost stack space if those entries aren't pushed (some
platforms may also need to purposely sacrifice some space here for
alignment considerations, as noted in the code -- although not an issue
for any FDPIC-capable platform today).
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: David Howells <dhowells@redhat.com>
These days most of the attributes in struct inode are properly kept in
sync by XFS. This patch removes the need for vn_revalidate completely by:
- keeping inode.i_flags uptodate after any flags are updated in
xfs_ioctl_setattr
- keeping i_mode, i_uid and i_gid uptodate in xfs_setattr
SGI-PV: 984566
SGI-Modid: xfs-linux-melb:xfs-kern:31679a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
it can be switched to take struct iattr directly and thus simplify the
implementation greatly. Also rename the ATTR_ flags to XFS_ATTR_ to not
conflict with the ATTR_ flags used by the VFS.
SGI-PV: 984565
SGI-Modid: xfs-linux-melb:xfs-kern:31678a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
->setattr but also addition XFS-specific attributes: project id, inode
flags and extent size hint. Having these in a single function makes it
more complicated and forces to have us a bhv_vattr intermediate structure
eating up stackspace.
This patch adds a new xfs_ioctl_setattr helper for the XFS ioctls that set
these attributes and remove the code to set them through xfs_setattr.
SGI-PV: 984564
SGI-Modid: xfs-linux-melb:xfs-kern:31677a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
particular case, the delta param which is supposed to describe the region
where extents have changed was not updated appropriately.
SGI-PV: 984030
SGI-Modid: xfs-linux-melb:xfs-kern:31663a
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Olaf Weber <olaf@sgi.com>
Remount currently happily accept any option thrown at it, although the
only filesystem specific option it actually handles is barrier/nobarrier.
And it actually doesn't handle these correctly either because it only uses
the value it parsed when we're doing a ro->rw transition. In addition to
that there's also a bad bug in xfs_parseargs which doesn't touch the
actual option in the mount point except for a single one,
XFS_MOUNT_SMALL_INUMS and thus forced any filesystem that's every
remounted in some way to not support 64bit inodes with no way to recover
unless unmounted.
This patch changes xfs_fs_remount to use it's own linux/parser.h based
options parse instead of xfs_parseargs and reject all options except for
barrier/nobarrier and to the right thing in general. Eventually I'd like
to have a single big option table used for mount aswell but that can wait
for a while.
SGI-PV: 983964
SGI-Modid: xfs-linux-melb:xfs-kern:31382a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
md raid1 can pass down barriers, but does not set an ordered flag on the
queue, so xfs does not even attempt a barrier write, and will never use
barriers on these block devices.
Remove the flag check and just let the barrier write test determine
barrier support.
A possible risk here is that if something does not set an ordered flag and
also does not properly return an error on a barrier write... but if it's
any consolation jbd/ext3/reiserfs never test the flag, and don't even do a
test write, they just disable barriers the first time an actual journal
barrier write fails.
SGI-PV: 983924
SGI-Modid: xfs-linux-melb:xfs-kern:31377a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Currently the xfs module init/exit code is a mess. It's farmed out over a
lot of function with very little error checking. This patch makes sure we
propagate all initialization failures properly and clean up after them.
Various runtime initializations are replaced with compile-time
initializations where possible to make this easier. The exit path is
similarly consolidated.
There's now split out function to create/destroy the kmem zones and
alloc/free the trace buffers. I've also changed the ktrace allocations to
KM_MAYFAIL and handled errors resulting from that.
And yes, we really should replace the XFS_*_TRACE ifdefs with a single
XFS_TRACE..
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:31354a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
can use the _ACL_TYPE_* definitions in linux-2.6/xfs_xattr.c. The
forthcoming generic acl code will also fix this problem.
SGI-PV: 982343
SGI-Modid: xfs-linux-melb:xfs-kern:31369a
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
If we don't do the blocksize/PAGESIZE check before calling
xfs_sb_validate_fsb_count() we can assert if we try to mount with a
blocksize > pagesize. The assert is valid so leave it and just move the
blocksize/pagesize check earlier.
SGI-PV: 983734
SGI-Modid: xfs-linux-melb:xfs-kern:31365a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
As reported by Michael-John Turner XFS updates the mtime on the source
inode of a rename call in case it's a directory and changes the parent.
This doesn't make any sense, is not mentioned in the standards and not
performed by any other Linux filesystems so remove it.
SGI-PV: 983684
SGI-Modid: xfs-linux-melb:xfs-kern:31364a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
algorithm
If xfs_bmbt_split() cannot find an AG with sufficient free space to
satisfy a full extent btree split then fall back to the lowspace allocator
algorithm.
SGI-PV: 983338
SGI-Modid: xfs-linux-melb:xfs-kern:31359a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
When free space is running low the extent allocator may choose to allocate
an extent from an AG without leaving sufficient space for a btree split
when inserting the new extent (see where xfs_bmap_btalloc() sets minleft
to 0). In this case the allocator will enable the lowspace algorithm which
is supposed to allow further allocations (such as btree splits and
newroots) to allocate from sequential AGs. This algorithm has been broken
for a long time and this patch restores its behaviour.
SGI-PV: 983338
SGI-Modid: xfs-linux-melb:xfs-kern:31358a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
The bmap btree split code relies on a previous data extent allocation
(from xfs_bmap_btalloc()) to find an AG that has sufficient space to
perform a full btree split, when inserting the extent. When converting
unwritten extents we don't allocate a data extent so a btree split will be
the first allocation. In this case we need to set minleft so the allocator
will pick an AG that has space to complete the split(s).
SGI-PV: 983338
SGI-Modid: xfs-linux-melb:xfs-kern:31357a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
xfs_attrmulti_by_handle currently request the size based on
sizeof(attr_multiop_t) but should be using sizeof(xfs_attr_multiop_t)
because that is what it is dealing with. Despite beeing wrong this
actually harmless in practice because both structures are the same size on
all platforms.
But this sizeof was the only user of struct attr_multiop so we can just
kill it. Also move the ATTR_OP_* defines xfs_attr.h into the struct
xfs_attr_multiop defintion in xfs_fs.h because they are only used with
that structure, and are part of the user ABI for the
XFS_IOC_ATTRMULTI_BY_HANDLE ioctl.
SGI-PV: 983508
SGI-Modid: xfs-linux-melb:xfs-kern:31352a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_attrlist_by_handle should only take the ATTR_ flags for the root
namespaces. The ATTR_KERN* flags may change at anytime and expect special
preconditions that can't be guaranteed for userspace-originating requests.
For example passing down ATTR_KERNNOVAL through xfs_attrlist_by_handle
will hit an assert in debug builds currently.
SGI-PV: 983677
SGI-Modid: xfs-linux-melb:xfs-kern:31351a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
After a btree insert operation a cursor can be invalid due to block splits
and a maybe a new root block. We reset the cursor in xfs_bmbt_insert() in
the cases where we think we need to but it isn't enough as we still see
assertions. Just do what we do elsewhere and reset the cursor
unconditionally. Also remove the fix to revalidate the original cursor in
xfs_bmbt_insert().
SGI-PV: 983336
SGI-Modid: xfs-linux-melb:xfs-kern:31342a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
ASSERTs are no good to us on a non-debug build so use
XFS_WANT_CORRUPTED_GOTOs to report extent btree corruption ASAP.
SGI-PV: 983500
SGI-Modid: xfs-linux-melb:xfs-kern:31338a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
xfs_dir2_node_lookup() calls xfs_da_node_lookup_int() which iterates
through leaf blocks containing the matching hash value for the name being
looked up. Inside xfs_da_node_lookup_int(), it calls the
xfs_dir2_leafn_lookup_for_entry() for each leaf block.
xfs_dir2_leafn_lookup_for_entry() iterates through each matching
hash/offset pair doing a name comparison to find the matching dirent.
For CI mode, the state->extrablk retains the details of the block that has
the CI match so xfs_dir2_node_lookup() can return the case-preserved name.
The original implementation didn't retain the xfs_da_buf_t properly, so
the lookup was returning a bogus name to be stored in the dentry.
In the case of unlink, the bad name was passed and in debug mode, ASSERTed
when it can't find the entry.
SGI-PV: 983284
SGI-Modid: xfs-linux-melb:xfs-kern:31337a
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The core kernel uses vfs_getattr to look at the inode size and similar
attributes, so there is no need to keep i_size uptodate for directories or
special files. This means we can remove xfs_validate_fields because the
I/O path already keeps i_size uptodate for regular files.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31336a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_remove and xfs_rmdir are almost the same with a little more work
performed in xfs_rmdir due to the . and .. entries. This patch merges
xfs_rmdir into xfs_remove and performs these actions conditionally.
Also clean up the error handling which was a nightmare in both versions
before.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31335a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
context count of ssize_t versus int. Change context count to be ssize_t.
SGI-PV: 983395
SGI-Modid: xfs-linux-melb:xfs-kern:31333a
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
This function is used to compact the indirect extent list by moving
extents from one page to the previous to fill them up. After we move some
extents to an earlier page we need to shuffle the remaining extents to the
start of the page. The actual bug here is the second argument to memmove()
needs to index past the extents, that were copied to the previous page,
and move the remaining extents. For pages that are already full (ie
ext_avail == 0) the compaction code has no net effect so don't do it.
SGI-PV: 983337
SGI-Modid: xfs-linux-melb:xfs-kern:31332a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
During a forced shutdown a xfs inode can be destroyed before log I/O
involving that inode is complete. We need to wait for the inode to be
unpinned before tearing it down. Version 2 cleans up the code a bit by
relying on xfs_iflush() to do the unpinning and forced shutdown check.
SGI-PV: 981240
SGI-Modid: xfs-linux-melb:xfs-kern:31326a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
and not go through xfs_attr_list.
SGI-PV: 983395
SGI-Modid: xfs-linux-melb:xfs-kern:31324a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
architecture.
This should fix the longstanding issues with xfs and old ABI arm boxes,
which lead to various asserts and xfs shutdowns, and for which an
(incorrect) patch has been floating around for years.
I've verified this patch by comparing the on-disk structure layouts using
pahole from the dwarves package, as well as running through a bit of xfsqa
under qemu-arm, modified so that the check/repair phase after each test
actually executes check/repair from the x86 host, on the filesystem
populated by the arm emulator. Thus far it all looks good.
There are 2 other structures with extra padding at the end, but they don't
seem to cause trouble. I suppose they could be packed as well:
xfs_dir2_data_unused_t and xfs_dir2_sf_t.
Note that userspace needs a similar treatment, and any filesystems which
were running with the previous rogue "fix" will now see corruption (either
in the kernel, or during xfs_repair) with this fix properly in place; it
may be worth teaching xfs_repair to identify and fix that specific issue.
SGI-PV: 982930
SGI-Modid: xfs-linux-melb:xfs-kern:31280a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Use the generic set, get and removexattr methods and supply the s_xattr
array with fine-grained handlers. All XFS/Linux highlevel attr handling is
rewritten from scratch and placed into fs/xfs/linux-2.6/xfs_xattr.c so
that it's separated from the generic low-level code.
SGI-PV: 982343
SGI-Modid: xfs-linux-melb:xfs-kern:31234a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The vfs_unlink/d_delete functionality in the Linux VFS make the
dentry negative if it is the only inode being referenced. Case-insensitive
mode doesn't work with negative dentries, so if using CI-mode, invalidate
the dentry on unlink/rmdir.
SGI-PV: 983102
SGI-Modid: xfs-linux-melb:xfs-kern:31308a
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Fixes a problem in the xfs_dir2_remove and xfs_dir2_replace paths which
intenally call directory format specific lookup funtions that assume
args->cmpresult is zeroed.
SGI-PV: 982606
SGI-Modid: xfs-linux-melb:xfs-kern:31268a
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Implement ASCII case-insensitive support. It's primary purpose is for
supporting existing filesystems that already use this case-insensitive
mode migrated from IRIX. But, if you only need ASCII-only case-insensitive
support (ie. English only) and will never use another language, then this
mode is perfectly adequate.
ASCII-CI is implemented by generating hashes based on lower-case letters
and doing lower-case compares. It implements a new xfs_nameops vector for
doing the hashes and comparisons for all filename operations.
To create a filesystem with this CI mode, use: # mkfs.xfs -n version=ci
<device>
SGI-PV: 981516
SGI-Modid: xfs-linux-melb:xfs-kern:31209a
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
This implements the code to store the actual filename found during a
lookup in the dentry cache and to avoid multiple entries in the dcache
pointing to the same inode.
To avoid polluting the dcache, we implement a new directory inode
operations for lookup. xfs_vn_ci_lookup() stores the correct case name in
the dcache.
The "actual name" is only allocated and returned for a case- insensitive
match and not an actual match.
Another unusual interaction with the dcache is not storing negative
dentries like other filesystems doing a d_add(dentry, NULL) when an ENOENT
is returned. During the VFS lookup, if a dentry returned has no inode,
dput is called and ENOENT is returned. By not doing a d_add, this actually
removes it completely from the dcache to be reused. create/rename have to
be modified to support unhashed dentries being passed in.
SGI-PV: 981521
SGI-Modid: xfs-linux-melb:xfs-kern:31208a
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
This add a dcache entry to the dcache for lookup, but changing the name
that is associated with the entry rather than the one passed in to the
lookup routine.
First, it sees if the case-exact match already exists in the dcache and
uses it if one exists. Otherwise, it allocates a new node with the new
name and splices it into the dcache.
Original code from ntfs_lookup in fs/ntfs/namei.c by Anton Altaparmakov.
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
Acked-by: Christoph Hellwig <hch@infradead.org>
The end of the xfs_da_args structure has 4 unsigned char fields for
true/false information on directory and attr operations using the
xfs_da_args structure.
The following converts these 4 into a op_flags field that uses the first 4
bits for these fields and allows expansion for future operation
information (eg. case-insensitive lookup request).
SGI-PV: 981520
SGI-Modid: xfs-linux-melb:xfs-kern:31206a
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Adds two pieces of functionality for the basis of case-insensitive support
in XFS:
1. A comparison result enumerated type: xfs_dacmp. It represents an
exact match, case-insensitive match or no match at all. This patch
only implements different and exact results.
2. xfs_nameops vector for specifying how to perform the hash generation
of filenames and comparision methods. In this patch the hash vector
points to the existing xfs_da_hashname function and the comparison
method does a length compare, and if the same, does a memcmp and
return the xfs_dacmp result.
All filename functions that use the hash (create, lookup remove, rename,
etc) now use the xfs_nameops.hashname function and all directory lookup
functions also use the xfs_nameops.compname function.
The lookup functions also handle case-insensitive results even though the
default comparison function cannot return that. And important aspect of
the lookup functions is that an exact match always has precedence over a
case-insensitive. So while a case-insensitive match is found, we have to
keep looking just in case there is an exact match. In the meantime, the
info for the first case-insensitive match is retained if no exact match is
found.
SGI-PV: 981519
SGI-Modid: xfs-linux-melb:xfs-kern:31205a
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
de-duplicate calls to xfs_attr_trace_enter
Every call to xfs_attr_trace_enter() shares the exact same 16 args in the
middle... just send in the context pointer and let the next level down
split it into the ktrace.
Compile tested only.
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:31200a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_binval aka xfs_flush_buftarg is the first thing done in
xfs_free_buftarg, so there is no need to have duplicated calls just before
xfs_free_buftarg in the mount failure path.
SGI-PV: 981951
SGI-Modid: xfs-linux-melb:xfs-kern:31197a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_mount_init is inlined into xfs_fs_fill_super and allocation switched
to kzalloc. Plug a leak of the mount structure for most early mount
failures. Move xfs_icsb_init_counters to as late as possible in the mount
path and make sure to undo it so that no stale hotplug cpu notifiers are
left around on mount failures.
SGI-PV: 981951
SGI-Modid: xfs-linux-melb:xfs-kern:31196a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Split setting the block and sector size out of xfs_fs_fill_super into a
small helper to make xfs_fs_fill_super more readable.
SGI-PV: 981951
SGI-Modid: xfs-linux-melb:xfs-kern:31194a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Currently closing the rt/log block device is done in the wrong spot, and
far too early. So revampt it:
- xfs_blkdev_put moved out of xfs_free_buftarg into the caller so that
it is done after tearing down the buftarg completely.
- call to xfs_unmountfs_close moved from xfs_mountfs into caller so
that it's done after tearing down the filesystem completely.
- xfs_unmountfs_close is renamed to xfs_close_devices and made static
in xfs_super.c
- opening of the block devices is split into a helper xfs_open_devices
that is symetric in use to xfs_close_devices
- xfs_unmountfs can now lose struct cred
- error handling around device opening sanitized in xfs_fs_fill_super
SGI-PV: 981951
SGI-Modid: xfs-linux-melb:xfs-kern:31193a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Freeing of the superblock is already handled in the caller, and that is
more symmetric with the mount path, too.
SGI-PV: 981951
SGI-Modid: xfs-linux-melb:xfs-kern:31192a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_mount is already pretty linux-specific so merge it into
xfs_fs_fill_super to allow for a more structured mount code in the next
patches. xfs_start_flags and xfs_finish_flags also move to xfs_super.c.
SGI-PV: 981951
SGI-Modid: xfs-linux-melb:xfs-kern:31189a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_unmount is small and already pretty Linux specific, so merge it into
the callers. The real unmount path is simplified a little by doing a
WARN_ON on the xfs_unmount_flush retval directly instead of propagating
the error back to the caller, and the mout failure case in simplified
significantly by removing the forced shutdown case and all the dmapi
events that shouldn't be sent because the dmapi mount event hasn't been
sent by that time either.
SGI-PV: 981951
SGI-Modid: xfs-linux-melb:xfs-kern:31188a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_igrow_start just expands to xfs_zero_eof with two asserts that are
useless in the context of the only caller and some rather confusing
comments.
xfs_igrow_finish is just a few lines of code decorated again with useless
asserts and confusing comments.
Just kill those two and merge them into xfs_setattr.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31186a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_mntupdate already is completely Linux specific due to the VFS flags
passed in, so it might aswell be merged into xfs_fs_remount.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31185a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Quite useless wrapper that doesn't help making the code more readable.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31184a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Recent changes to update the version number during mount (attr2 stuff)
failed to change the assert that checked for calid flags being changed on
mount. Clearly this path hasn't been exercised by the test code....
SGI-PV: 981950
SGI-Modid: xfs-linux-melb:xfs-kern:31183a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
No need for addition permission checks in the xattr handler,
fs/xattr.c:xattr_permission() already does them, and in fact slightly more
strict then what was in the attr_capable handlers.
SGI-PV: 981809
SGI-Modid: xfs-linux-melb:xfs-kern:31164a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The l_flushsema doesn't exactly have completion semantics, nor mutex
semantics. It's used as a list of tasks which are waiting to be notified
that a flush has completed. It was also being used in a way that was
potentially racy, depending on the semaphore implementation.
By using a sv_t instead of a semaphore we avoid the need for a separate
counter, since we know we just need to wake everything on the queue.
Original waitqueue implementation from Matthew Wilcox. Cleanup and
conversion to sv_t by Christoph Hellwig.
SGI-PV: 981507
SGI-Modid: xfs-linux-melb:xfs-kern:31059a
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
We found this while experimenting with 2GiB xfs logs. The previous code
never assumed that xfs logs would ever get so large.
SGI-PV: 981502
SGI-Modid: xfs-linux-melb:xfs-kern:31058a
Signed-off-by: Michael Nishimoto <miken@agami.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
kmem_free() function takes (ptr, size) arguments but doesn't actually use
second one.
This patch removes size argument from all callsites.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31050a
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
features2 fields.
Previously, mounting with noattr2 failed to achieve anything because
although it cleared the attr2 mount flag, it would set it again as soon as
it processed the superblock fields. The fix now has an explicit noattr2
flag and uses it later to fix up the versionnum and features2 fields.
SGI-PV: 980021
SGI-Modid: xfs-linux-melb:xfs-kern:31003a
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
For small file block allocations, mballoc uses per cpu prealloc
space. Use goal block when searching for the right prealloc
space. Also make sure ext4_da_writepages tries to write
all the pages for small files in single attempt
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The write_cache_pages() function uses the mapping->writeback_index as
the starting index to write out when range_cyclic is set. Properly
initialize writeback_index so that we start the writeout at index 0.
This was found when debugging the small file fragmentation on ext4.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fix ext4_has_free_blocks() to return 0 when we don't have enough space.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Previous delalloc writepages implementation started a new transaction
outside of a loop which called get_block() to do the block allocation.
Since we didn't know exactly how many blocks would need to be allocated,
the estimated journal credits required was very conservative and caused
many issues.
With the reworked delayed allocation, a new transaction is created for
each get_block(), thus we don't need to guess how many credits for the
multiple chunk of allocation. We start every transaction with enough
credits for inserting a single exent. When estimate the credits for
indirect blocks to allocate a chunk of blocks, we need to know the
number of data blocks to allocate. We use the total number of reserved
delalloc datablocks; if that is too big, for non-extent files, we need
to limit the number of blocks to EXT4_MAX_TRANS_BLOCKS.
Code cleanup from Aneesh.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Reviewed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
With the below changes we reserve credit needed to insert only one
extent resulting from a call to single get_block. This makes sure we
don't take too much journal credits during writeout. We also don't
limit the pages to write. That means we loop through the dirty pages
building largest possible contiguous block request. Then we issue a
single get_block request. We may get less block that we requested. If
so we would end up not mapping some of the buffer_heads. That means
those buffer_heads are still marked delay. Later in the writepage
callback via __mpage_writepage we redirty those pages.
We should also not limit/throttle wbc->nr_to_write in the filesystem
writepages callback. That cause wrong behaviour in
generic_sync_sb_inodes caused by wbc->nr_to_write being <= 0
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
DIO and fallocate credit calculation is different than writepage, as
they do start a new journal right for each call to ext4_get_blocks_wrap().
This patch uses the helper function in DIO and fallocate case, passing
a flag indicating that the modified data are contigous thus could account
less indirect/index blocks.
This patch also fixed the journal credit reservation for direct I/O
(DIO). Previously the estimated credits for DIO only was calculated for
non-extent files, which was not enough if the file is extent-based.
Also fixed was fallocate double-counting credits for modifying the the
superblock.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch modified the writepage/write_begin credit calculation for
extent files, to use the credits caculation helper function.
The current calculation of how many index/leaf blocks should be
accounted is too conservetive, it always considered the worse case,
where the tree level is 5, and in the case of multiple chunk
allocations, it always assumed no blocks were dirtied in common across
the allocations. This path uses the accurate depth of the inode with
some extras to calculate the index blocks, and also less conservative in
the case of multiple allocation accounting.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When considering how many journal credits are needed for modifying a
chunk of data, we need to account for the super block, inode block,
quota blocks and xattr block, indirect/index blocks, also, group bitmap
and group descriptor blocks for new allocation (including data and
indirect/index blocks). There are many places in ext4 do the calculation
on their own and often missed one or two meta blocks, and often they
assume single block allocation, and did not considering the multile
chunk of allocation case.
This patch is trying to cleanup current journal credit code, provides
some common helper funtion to calculate the journal credits, to be used
for writepage, writepages, DIO, fallocate, migration, defrag, and for
both nonextent and extent files.
This patch modified the writepage/write_begin credit caculation for
nonextent files, to use the new helper function. It also fixed the
problem that writepage on nonextent files did not consider the case
blocksize <pagesize, thus could possibelly need multiple block
allocation in a single transaction.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The find_group_flex() function starts with best_flex as the
parent_fbg_group, which happens to have 0 inodes free. Some of the
flex groups searched have free blocks and free inodes, but the
flex_freeb_ratio is < 10, so they're skipped. Then when a group is
compared to the current "best" flex group, it does not have more free
blocks than "best", so it is skipped as well.
This continues until no flex group with free inodes is found which has
a proper ratio or which has more free blocks than the "best" group,
and we're left with a "best" group that has 0 inodes free, and we
return -ENOSPC.
We fix this by changing the logic so that if the current "best" flex
group has no inodes free, and the current one does have room, it is
promoted to the next "best."
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When trying to resize an ext4 fs and you run out of reserved gdt blocks,
you get an error that doesn't actually tell you what went wrong, it just
says that the gdb it picked is not correct, which is the case since you
don't have any reserved gdt blocks left. This patch adds a check to make
sure you have reserved gdt blocks to use, and if not prints out a more
relevant error.
Signed-off-by: Josef Bacik <jbacik@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Cc: Andreas Dilger <adilger@sun.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In ext4_ext_truncate(), we should use the more generic
ext4_discard_reservations() call so we do the right thing when the
filesystem is mounted with the nomballoc option.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Mingming Cao <cmm@us.ibm.com>
This fixes a bug where readdir() would return a directory entry twice
if there was a hash collision in an hash tree indexed directory.
Signed-off-by: Eugene Dashevsky <eugene@ibrix.com>
Signed-off-by: Mike Snitzer <msnitzer@ibrix.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Ext4 will release the reserved blocks for delayed allocations when
inode is truncated/unlinked. If there is no reserved block at all, we
shouldn't need to do so. But current code still tries to release the
reserved blocks regardless whether the counters's value is 0.
Continue to do that causes the later calculation to go wrong and a
kernel BUG_ON() caught that. This doesn't happen for extent-based
files, as the calculation for 0 reserved blocks was right for extent
based file.
This patch fixed the kernel BUG() due to above reason. It adds checks
for 0 to avoid unnecessary release and fix calculation for non-extent
files.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We need to call ext4_discard_reservation() earlier in ext4_truncate(),
to avoid a BUG() in ext4_mb_return_to_preallocation(), which is called
(ultimately) by ext4_free_blocks(). So we must ditch the blocks on
i_prealloc_list before we start freeing the data blocks.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When using fallocate the buffer_heads are marked unwritten and unmapped.
We need to map them in the writepages after a get_block. Otherwise we
split the uninit extents, but never write the content to disk.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* 'hotfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
NFS: Ensure we call nfs_sb_deactive() after releasing the directory inode
nfs_remount oops when rebooting + possible fix
Simplify the code of include/linux/task_io_accounting.h.
It is also more reasonable to have all the task i/o-related statistics in a
single struct (task_io_accounting).
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In order to avoid the "Busy inodes after unmount" error message, we need to
ensure that nfs_async_unlink_release() releases the super block after the
call to nfs_free_unlinkdata().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Put all i/o statistics in struct proc_io_accounting and use inline functions to
initialize and increment statistics, removing a lot of single variable
assignments.
This also reduces the kernel size as following (with CONFIG_TASK_XACCT=y and
CONFIG_TASK_IO_ACCOUNTING=y).
text data bss dec hex filename
11651 0 0 11651 2d83 kernel/exit.o.before
11619 0 0 11619 2d63 kernel/exit.o.after
10886 132 136 11154 2b92 kernel/fork.o.before
10758 132 136 11026 2b12 kernel/fork.o.after
3082029 807968 4818600 8708597 84e1f5 vmlinux.o.before
3081869 807968 4818600 8708437 84e155 vmlinux.o.after
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Acked-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.infradead.org/mtd-2.6: (57 commits)
[MTD] [NAND] subpage read feature as a way to increase performance.
CPUFREQ: S3C24XX NAND driver frequency scaling support.
[MTD][NAND] au1550nd: remove unused variable
[MTD] jedec_probe: Fix SST 16-bit chip detection
[MTD][MTDPART] Fix a division by zero bug
[MTD][MTDPART] Cleanup and document the erase region handling
[MTD][MTDPART] Handle most checkpatch findings
[MTD][MTDPART] Seperate main loop from per-partition code in add_mtd_partition
[MTD] physmap: resume already suspended chips on failure to suspend
[MTD] physmap: Fix suspend/resume/shutdown bugs.
[MTD] [NOR] Fix -ETIMEO errors in CFI driver
[MTD] [NAND] fsl_elbc_nand: fix section mismatch with CONFIG_MTD_OF_PARTS=y
[JFFS2] Use .unlocked_ioctl
[MTD] Fix const assignment in the MTD command line partitioning driver
[MTD] [NOR] gen_probe: No debug message when debugging is disabled
[MTD] [NAND] remove __PPC__ hardcoded address from DiskOnChip drivers
[MTD] [MAPS] Remove the bast-flash driver.
[MTD] [NAND] fsl_elbc_nand: ecclayout cleanups
[MTD] [NAND] fsl_elbc_nand: implement support for flash-based BBT
[MTD] [NAND] fsl_elbc_nand: fix OOB workability for large page NAND chips
...
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (39 commits)
[PATCH] fix RLIM_NOFILE handling
[PATCH] get rid of corner case in dup3() entirely
[PATCH] remove remaining namei_{32,64}.h crap
[PATCH] get rid of indirect users of namei.h
[PATCH] get rid of __user_path_lookup_open
[PATCH] f_count may wrap around
[PATCH] dup3 fix
[PATCH] don't pass nameidata to __ncp_lookup_validate()
[PATCH] don't pass nameidata to gfs2_lookupi()
[PATCH] new (local) helper: user_path_parent()
[PATCH] sanitize __user_walk_fd() et.al.
[PATCH] preparation to __user_walk_fd cleanup
[PATCH] kill nameidata passing to permission(), rename to inode_permission()
[PATCH] take noexec checks to very few callers that care
Re: [PATCH 3/6] vfs: open_exec cleanup
[patch 4/4] vfs: immutable inode checking cleanup
[patch 3/4] fat: dont call notify_change
[patch 2/4] vfs: utimes cleanup
[patch 1/4] vfs: utimes: move owner check into inode_change_ok()
[PATCH] vfs: use kstrdup() and check failing allocation
...
Oleg Nesterov points out that we should check that the task is still alive
before we iterate over the threads. This patch includes a fixup for this.
Also simplify do_io_accounting() implementation.
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* dup2() should return -EBADF on exceeded sysctl_nr_open
* dup() should *not* return -EINVAL even if you have rlimit set to 0;
it should get -EMFILE instead.
Check for orig_start exceeding rlimit taken to sys_fcntl().
Failing expand_files() in dup{2,3}() now gets -EMFILE remapped to -EBADF.
Consequently, remaining checks for rlimit are taken to expand_files().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Since Ulrich is OK with getting rid of dup3(fd, fd, flags) completely,
to hell the damn thing goes. Corner case for dup2() is handled in
sys_dup2() (complete with -EBADF if dup2(fd, fd) is called with fd
that is not open), the rest is done in dup3().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
fs.h needs path.h, not namei.h; nfs_fs.h doesn't need it at all.
Several places in the tree needed direct include.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
make it atomic_long_t; while we are at it, get rid of useless checks in affs,
hfs and hpfs - ->open() always has it equal to 1, ->release() - to 0.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro notice one cornercase that the new dup3() code. The dup2()
function, as a special case, handles dup-ing to the same file
descriptor. In this case the current dup3() code does nothing at
all. I.e., it ingnores the flags parameter. This shouldn't happen,
the close-on-exec flag should be set if requested.
In case the O_CLOEXEC bit in the flags parameter is not set the
dup3() function should behave in this respect identical to dup2().
This means dup3(fd, fd, 0) should not actively reset the c-o-e
flag.
The patch below implements this minor change.
[AV: credits to Artur Grabowski for bringing that up as potential subtle point
in dup2() behaviour]
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* do not pass nameidata; struct path is all the callers want.
* switch to new helpers:
user_path_at(dfd, pathname, flags, &path)
user_path(pathname, &path)
user_lpath(pathname, &path)
user_path_dir(pathname, &path) (fail if not a directory)
The last 3 are trivial macro wrappers for the first one.
* remove nameidata in callers.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Almost all users __user_walk_fd() and friends care only about struct path.
Get rid of the few that do not.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
On Mon, May 19, 2008 at 12:01:49AM +0200, Marcin Slusarz wrote:
> open_exec is needlessly indented, calls ERR_PTR with 0 argument
> (which is not valid errno) and jumps into middle of function
> just to return value.
> So clean it up a bit.
Still looks rather messy. See below for a better version.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Move the immutable and append-only checks from chmod, chown and utimes
into notify_change(). Checks for immutable and append-only files are
always performed by the VFS and not by the filesystem (see
permission() and may_...() in namei.c), so these belong in
notify_change(), and not in inode_change_ok().
This should be completely equivalent.
CC: Ulrich Drepper <drepper@redhat.com>
CC: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The FAT_IOCTL_SET_ATTRIBUTES ioctl() calls notify_change() to change
the file mode before changing the inode attributes. Replace with
explicit calls to security_inode_setattr(), fat_setattr() and
fsnotify_change().
This is equivalent to the original. The reason it is needed, is that
later in the series we move the immutable check into notify_change().
That would break the FAT_IOCTL_SET_ATTRIBUTES ioctl, as it needs to
perform the mode change regardless of the immutability of the file.
[Fix error if fat is built as a module. Thanks to OGAWA Hirofumi for
noticing.]
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Untange the mess that is do_utimes(). Add kerneldoc comment to
do_utimes().
CC: Ulrich Drepper <drepper@redhat.com>
CC: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add a new ia_valid flag: ATTR_TIMES_SET, to handle the
UTIMES_OMIT/UTIMES_NOW and UTIMES_NOW/UTIMES_OMIT cases. In these
cases neither ATTR_MTIME_SET nor ATTR_ATIME_SET is in the flags, yet
the POSIX draft specifies that permission checking is performed the
same way as if one or both of the times was explicitly set to a
timestamp.
See the path "vfs: utimensat(): fix error checking for
{UTIME_NOW,UTIME_OMIT} case" by Michael Kerrisk for the patch
introducing this behavior.
This is a cleanup, as well as allowing filesystems (NFS/fuse/...) to
perform their own permission checking instead of the default.
CC: Ulrich Drepper <drepper@redhat.com>
CC: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
- use kstrdup() instead of kmalloc() + memcpy()
- return NULL if allocating ->mnt_devname failed
- mnt_devname should be const
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* MAY_CHDIR is redundant - it's an equivalent of MAY_ACCESS
* MAY_ACCESS on fuse should affect only the last step of pathname resolution
* fchdir() and chroot() should pass MAY_ACCESS, for the same reason why
chdir() needs that.
* now that we pass MAY_ACCESS explicitly in all cases, LOOKUP_ACCESS can be
removed; it has no business being in nameidata.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
... so we ought to pass MAY_CHDIR to vfs_permission() instead of having
it triggered on every step of preceding pathname resolution. LOOKUP_CHDIR
is killed by that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Remove the unused mode parameter from vfs_symlink and callers.
Thanks to Tetsuo Handa for noticing.
CC: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Why not reuse "inode" which is assigned as
struct inode *inode = old_dentry->d_inode;
in the beginning of vfs_link() ?
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
All calls to remove_suid() are made with a file pointer, because
(similarly to file_update_time) it is called when the file is written.
Clean up callers by passing in a file instead of a dentry.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
vfs_permission(MAY_WRITE) already checked for the inode being
immutable, so no need to repeat it.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: Christoph Hellwig <hch@infradead.org>
* kill nameidata * argument; map the 3 bits in ->flags anybody cares
about to new MAY_... ones and pass with the mask.
* kill redundant gfs2_iop_permission()
* sanitize ecryptfs_permission()
* fix remaining places where ->permission() instances might barf on new
MAY_... found in mask.
The obvious next target in that direction is permission(9)
folded fix for nfs_permission() breakage from Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
hpfs_unlink() calls permission() prior to truncating the file. HPFS
doesn't define a .permission method, so replace with explicit call to
generic_permission().
This is equivalent, except that devcgroup_inode_permission() and
security_inode_permission() are not called.
The truncation is just an implementation detail of the unlink, so
these security checks are unnecessary.
I suspect that even calling generic_permission() is unnecessary, since
we shouldn't mind if the file isn't writable. But I leave that to the
maintainer to decide.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
* keep references to ctl_table_head and ctl_table in /proc/sys inodes
* grab the former during operations, use the latter for access to
entry if that succeeds
* have ->d_compare() check if table should be seen for one who does lookup;
that allows us to avoid flipping inodes - if we have the same name resolve
to different things, we'll just keep several dentries and ->d_compare()
will reject the wrong ones.
* have ->lookup() and ->readdir() scan the table of our inode first, then
walk all ctl_table_header and scan ->attached_by for those that are
attached to our directory.
* implement ->getattr().
* get rid of insane amounts of tree-walking
* get rid of the need to know dentry in ->permission() and of the contortions
induced by that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
hppfs_permission() is equivalent to the '.permission == NULL' case.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Lookup can install a child dentry for a deleted directory. This keeps
the directory dentry alive, and the inode pinned in the cache and on
disk, even after all external references have gone away.
This isn't a big problem normally, since memory pressure or umount
will clear out the directory dentry and its children, releasing the
inode. But for UBIFS this causes problems because its orphan area can
overflow.
Fix this by returning ENOENT for all lookups on a S_DEAD directory
before creating a child dentry.
Thanks to Zoltan Sogor for noticing this while testing UBIFS, and
Artem for the excellent analysis of the problem and testing.
Reported-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Tested-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
When verifying the decoded header before decoding the object identifier
[CIFS] Fix warnings from checkpatch
[CIFS] Fix improper endian conversion of ACL subauth field
[CIFS] Fix possible double free if search immediately after search rewind fails
[CIFS] remove checkpatch warning
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
cifs: assorted endian annotations
[CIFS] break ATTR_SIZE changes out into their own function
lockdep: annotate cifs in-kernel sockets
[CIFS] Fix compiler warning on 64-bit
This adds /proc/PID/syscall and /proc/PID/task/TID/syscall magic files.
These use task_current_syscall() to show the task's current system call
number and argument registers, stack pointer and PC. For a task blocked
but not in a syscall, the file shows "-1" in place of the syscall number,
followed by only the SP and PC. For a task that's not blocked, it shows
"running".
Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds the tracehook_tracer_task() hook to consolidate all forms of
"Who is using ptrace on me?" logic. This is used for "TracerPid:" in
/proc and for permission checks. We also clean up the selinux code the
called an identical accessor.
Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This moves all the ptrace hooks related to exec into tracehook.h inlines.
This also lifts the calls for tracing out of the binfmt load_binary hooks
into search_binary_handler() after it calls into the binfmt module. This
change has no effect, since all the binfmt modules' load_binary functions
did the call at the end on success, and now search_binary_handler() does
it immediately after return if successful. We consolidate the repeated
code, and binfmt modules no longer need to import ptrace_notify().
Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use WARN() instead of a printk+WARN_ON() pair; this way the message
becomes part of the warning section for better reporting/collection.
This way, the entire if() {} section can collapse into the WARN() as well.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use WARN() instead of a printk+WARN_ON() pair; this way the message becomes
part of the warning section for better reporting/collection. Also, with this,
one fo the if() sections collapses entirely into the WARN().
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use WARN() instead of a printk+WARN_ON() pair; this way the message
becomes part of the warning section for better reporting/collection.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kmem cache passed to constructor is only needed for constructors that are
themselves multiplexeres. Nobody uses this "feature", nor does anybody uses
passed kmem cache in non-trivial way, so pass only pointer to object.
Non-trivial places are:
arch/powerpc/mm/init_64.c
arch/powerpc/mm/hugetlbpage.c
This is flag day, yes.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Jon Tollefson <kniht@linux.vnet.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Matt Mackall <mpm@selenic.com>
[akpm@linux-foundation.org: fix arch/powerpc/mm/hugetlbpage.c]
[akpm@linux-foundation.org: fix mm/slab.c]
[akpm@linux-foundation.org: fix ubifs]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mapping->tree_lock has no read lockers. convert the lock from an rwlock
to a spinlock.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use get_user_pages_fast in splice. This reverts some mmap_sem batching
there, however the biggest problem with mmap_sem tends to be hold times
blocking out other threads rather than cacheline bouncing. Further: on
architectures that implement get_user_pages_fast without locks, mmap_sem
can be avoided completely anyway.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Zach Brown <zach.brown@oracle.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use get_user_pages_fast in the common/generic block and fs direct IO paths.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Zach Brown <zach.brown@oracle.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adds OMFS to the fs Kconfig and Makefile
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add functions for reading and manipulating the storage of file data in
the extent-based OMFS.
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add lookup and directory management routines for OMFS. The filesystem uses
hashing based on the filename and stores collisions, unordered, in siblings
of files' inode structures. To support telldir, the current position in
the hash table is encoded in fpos.
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Replace the BKL-based locking scheme used in the bfs driver by a private
filesystem-wide mutex.
Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.fi>
Cc: Tigran Aivazian <tigran_aivazian@symantec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch makes the following cleanups:
o removing an unused variable from bfs_fill_super();
o removing unneeded blank spaces from pointer
definitions.
Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.fi>
Cc: Tigran Aivazian <tigran_aivazian@symantec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The semaphore s_bmlock is used as a mutex. Convert it to the mutex API.
Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (34 commits)
powerpc: Wireup new syscalls
Move update_mmu_cache() declaration from tlbflush.h to pgtable.h
powerpc/pseries: Remove kmalloc call in handling writes to lparcfg
powerpc/pseries: Update arch vector to indicate support for CMO
ibmvfc: Add support for collaborative memory overcommit
ibmvscsi: driver enablement for CMO
ibmveth: enable driver for CMO
ibmveth: Automatically enable larger rx buffer pools for larger mtu
powerpc/pseries: Verify CMO memory entitlement updates with virtual I/O
powerpc/pseries: vio bus support for CMO
powerpc/pseries: iommu enablement for CMO
powerpc/pseries: Add CMO paging statistics
powerpc/pseries: Add collaborative memory manager
powerpc/pseries: Utilities to set firmware page state
powerpc/pseries: Enable CMO feature during platform setup
powerpc/pseries: Split retrieval of processor entitlement data into a helper routine
powerpc/pseries: Add memory entitlement capabilities to /proc/ppc64/lparcfg
powerpc/pseries: Split processor entitlement retrieval and gathering to helper routines
powerpc/pseries: Remove extraneous error reporting for hcall failures in lparcfg
powerpc: Fix compile error with binutils 2.15
...
Fixed up conflict in arch/powerpc/platforms/52xx/Kconfig manually.
If fuse filesystem doesn't define it's own lock operations, then allow the
lock manager to work with fuse.
Adding lockd support for remote locking is also possible, but more rarely
used, so leave it till later.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: David Teigland <teigland@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Implement the get_parent export operation by sending a LOOKUP request with
".." as the name.
Implement looking up an inode by node ID after it has been evicted from
the cache. This is done by seding a LOOKUP request with "." as the name
(for all file types, not just directories).
The filesystem can set the FUSE_EXPORT_SUPPORT flag in the INIT reply, to
indicate that it supports these special lookups.
Thanks to John Muir for the original implementation of this feature.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: David Teigland <teigland@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a new helper function which sends a LOOKUP request with the supplied
name. This will be used by the next patch to send special LOOKUP requests
with "." and ".." as the name.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Implement export_operations, to allow fuse filesystems to be exported to
NFS. This feature has been in the out-of-tree fuse module, and is widely
used and tested.
It has not been originally merged into mainline, because doing the NFS
export in userspace was thought to be a cleaner and more efficient way of
doing it, than through the kernel.
While that is true, it would also have involved a lot of duplicated effort
at reimplementing NFS exporting (all the different versions of the
protocol). This effort was unfortunately not undertaken by anyone, so we
are left with doing it the easy but less efficient way.
If this feature goes in, the out-of-tree fuse module can go away,
which would have several advantages:
- not having to maintain two versions
- less confusion for users
- no bugs due to kernel API changes
Comment from hch:
- Use the same fh_type values as XFS, since we use the same fh encoding.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use d_splice_alias() instead of d_add() in fuse lookup code, to allow NFS
exporting.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Allow filesystem's ->lock() method to call posix_lock_file() instead of
posix_lock_file_wait(), and return FILE_LOCK_DEFERRED. This makes it
possible to implement a such a ->lock() function, that works with the lock
manager, which needs the call to be asynchronous.
Now the vfs_lock_file() helper can be used, so this is a cleanup as well.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: David Teigland <teigland@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Extract common code into a function.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: David Teigland <teigland@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use a special error value FILE_LOCK_DEFERRED to mean that a locking
operation returned asynchronously. This is returned by
posix_lock_file() for sleeping locks to mean that the lock has been
queued on the block list, and will be woken up when it might become
available and needs to be retried (either fl_lmops->fl_notify() is
called or fl_wait is woken up).
f_op->lock() to mean either the above, or that the filesystem will
call back with fl_lmops->fl_grant() when the result of the locking
operation is known. The filesystem can do this for sleeping as well
as non-sleeping locks.
This is to make sure, that return values of -EAGAIN and -EINPROGRESS by
filesystems are not mistaken to mean an asynchronous locking.
This also makes error handling in fs/locks.c and lockd/svclock.c slightly
cleaner.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: David Teigland <teigland@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix nlm_fopen() to return NLM_FAILED (or NLM_LCK_DENIED_NOLOCKS) instead
of NLM_LCK_DENIED. The latter means the lock request failed because of a
conflicting lock (i.e. a temporary error), which is wrong in this case.
Also fix the client to return ENOLCK instead of EAGAIN if a blocking lock
request returns with NLM_LOCK_DENIED.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: David Teigland <teigland@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Report per-thread I/O statistics in /proc/pid/task/tid/io and aggregate
parent I/O statistics in /proc/pid/io. This approach follows the same
model used to account per-process and per-thread CPU times.
As a practial application, this allows for example to quickly find the top
I/O consumer when a process spawns many child threads that perform the
actual I/O work, because the aggregated I/O statistics can always be found
in /proc/pid/io.
[ Oleg Nesterov points out that we should check that the task is still
alive before we iterate over the threads, but also says that we can do
that fixup on top of this later. - Linus ]
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Cc: Matt Heaton <matt@hostmonster.com>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Acked-by-with-comments: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Current two-stage scheme of removing PDE emphasizes one bug in proc:
open
rmmod
remove_proc_entry
close
->release won't be called because ->proc_fops were cleared. In simple
cases it's small memory leak.
For every ->open, ->release has to be done. List of openers is introduced
which is traversed at remove_proc_entry() if neeeded.
Discussions with Al long ago (sigh).
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch moves the extern of struct proc_kmsg_operations to
fs/proc/internal.h and adds an #include "internal.h" to fs/proc/kmsg.c
so that the latter sees the former.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
convert the local Dprintk() compile time debug printk wrappers to the
generic pr_debug() wrapper.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ELF_CORE_EFLAGS is already used by the binfmt_elf coredumper to set correct
arch specific ELF header flags on coredumps. Use it for kcore dumps as well.
At the moment, this affects the CRIS and the H8300 arch.
Signed-off-by: Edgar E. Iglesias <edgar@axis.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I don't understand why the multi-thread coredump implies the core_uses_pid
behaviour, but we shouldn't use mm->mm_users for that. This counter can
be incremented by get_task_mm(). Use the valued returned by
coredump_wait() instead.
Also, remove the "const char *pattern" argument, format_corename() can use
core_pattern directly.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Artem Bityutskiy