After initiator has burned up all login retries, target authentication
application begins to run. This triggers a link bounce on target side.
Initiator will attempt another login. Due to N2N, the PRLI [nvme | fcp] can
fail because of the mode mismatch with target. This patch add a few more
login retries to revive the connection.
Link: https://lore.kernel.org/r/20220607044627.19563-11-njavali@marvell.com
Fixes: 4de067e5df ("scsi: qla2xxx: edif: Add N2N support for EDIF")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On session deletion, wait for app to acknowledge before moving on. This
allows both app and driver to stay in sync. In addition, this gives a
chance for authentication app to do any type of cleanup before moving on.
Link: https://lore.kernel.org/r/20220607044627.19563-4-njavali@marvell.com
Fixes: dd30706e73 ("scsi: qla2xxx: edif: Add key update")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
While a session is in the middle of a relogin, a late RSCN can be delivered
from switch. RSCN trigger fabric scan where the scan logic can trigger
another session login while a login is in progress. Reduce the extra
trigger to prevent multiple logins to the same session.
Link: https://lore.kernel.org/r/20220310092604.22950-10-njavali@marvell.com
Fixes: bee8b84686 ("scsi: qla2xxx: Reduce redundant ADISC command for RSCNs")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
User experienced device lost. The log shows Get port data base command was
queued up, failed, and requeued again. Every time it is requeued, it set
the FCF_ASYNC_ACTIVE. This prevents any recovery code from occurring
because driver thinks a recovery is in progress for this session. In
essence, this session is hung. The reason it gets into this place is the
session deletion got in front of this call due to link perturbation.
Break the requeue cycle and exit. The session deletion code will trigger a
session relogin.
Link: https://lore.kernel.org/r/20220310092604.22950-8-njavali@marvell.com
Fixes: 726b854870 ("qla2xxx: Add framework for async fabric discovery")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
User experienced some of the LUN failed to get rediscovered after long
cable pull test. The issue is triggered by a race condition between driver
setting session online state vs starting the LUN scan process at the same
time. Current code set the online state after notifying the session is
available. In this case, trigger to start the LUN scan process happened
before driver could set the session in online state. LUN scan ends up with
failure due to the session online check was failing.
Set the online state before reporting of the availability of the session.
Link: https://lore.kernel.org/r/20220310092604.22950-3-njavali@marvell.com
Fixes: aecf043443 ("scsi: qla2xxx: Fix Remote port registration")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Make q_dev_state a little more readable and maintainable by using named
initializers.
Also convert QLA8XXX_DEV_* macros into an enum and remove
qla83xx_dev_state_to_string(), which is a duplicate of qdev_state().
Link: https://lore.kernel.org/r/AS8PR10MB495298515A7553C8D6D6E74D9D349@AS8PR10MB4952.EURPRD10.PROD.OUTLOOK.COM
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Gleb Chesnokov <Chesnokov.G@raidix.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
While allocating firmware dump, check if dump is already collected and do
not re-allocate the buffer.
Link: https://lore.kernel.org/r/20220110050218.3958-17-njavali@marvell.com
Cc: stable@vger.kernel.org
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This is an update to the original 28xx adapter enablement. Add a bunch of
conditionals that are applicable for 28xx.
Link: https://lore.kernel.org/r/20220110050218.3958-16-njavali@marvell.com
Fixes: ecc89f25e2 ("scsi: qla2xxx: Add Device ID for ISP28XX")
Cc: stable@vger.kernel.org
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A device logout in loop topology initiates a device connection teardown
which loses the FW device handle. In loop topo, the device handle is not
regrabbed leading to device login failures and eventually to loss of the
device. Fix this by taking the main login path that does it.
Link: https://lore.kernel.org/r/20220110050218.3958-11-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix stuck sessions in get port database. When a thread is in the process of
re-establishing a session, a flag is set to prevent multiple threads /
triggers from doing the same task. This flag was left on, where any attempt
to relogin was locked out. Clear this flag, if the attempt has failed.
Link: https://lore.kernel.org/r/20220110050218.3958-4-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The timeout handler and the done function are racing. When
qla2x00_async_iocb_timeout() starts to run it can be preempted by the
normal response path (via the firmware?). qla24xx_async_gpsc_sp_done()
releases the SRB unconditionally. When scheduling back to
qla2x00_async_iocb_timeout() qla24xx_async_abort_cmd() will access an freed
sp->qpair pointer:
qla2xxx [0000:83:00.0]-2871:0: Async-gpsc timeout - hdl=63d portid=234500 50:06:0e:80:08:77:b6:21.
qla2xxx [0000:83:00.0]-2853:0: Async done-gpsc res 0, WWPN 50:06:0e:80:08:77:b6:21
qla2xxx [0000:83:00.0]-2854:0: Async-gpsc OUT WWPN 20:45:00:27:f8:75:33:00 speeds=2c00 speed=0400.
qla2xxx [0000:83:00.0]-28d8:0: qla24xx_handle_gpsc_event 50:06:0e:80:08:77:b6:21 DS 7 LS 6 rc 0 login 1|1 rscn 1|0 lid 5
BUG: unable to handle kernel NULL pointer dereference at 0000000000000004
IP: qla24xx_async_abort_cmd+0x1b/0x1c0 [qla2xxx]
Obvious solution to this is to introduce a reference counter. One reference
is taken for the normal code path (the 'good' case) and one for the timeout
path. As we always race between the normal good case and the timeout/abort
handler we need to serialize it. Also we cannot assume any order between
the handlers. Since this is slow path we can use proper synchronization via
locks.
When we are able to cancel a timer (del_timer returns 1) we know there
can't be any error handling in progress because the timeout handler hasn't
expired yet, thus we can safely decrement the refcounter by one.
If we are not able to cancel the timer, we know an abort handler is
running. We have to make sure we call sp->done() in the abort handlers
before calling kref_put().
Link: https://lore.kernel.org/r/20220110050218.3958-3-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move common open-coded asynchronous command initializing code such as
setting up the timer and the done callback into one function. This is a
preparation step and allows us later on to change the low level error flow
handling at a central place.
Link: https://lore.kernel.org/r/20220110050218.3958-2-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently, the dev_loss_tmo setting is only ever used for SCSI
devices. This patch reshuffles initialisation such that the SCSI remote
ports are registered before the NVMe ones, allowing the dev_loss_tmo
setting to be synchronized between SCSI and NVMe.
Link: https://lore.kernel.org/r/20211214111139.52503-1-dwagner@suse.de
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
db_flags field is a bit field. Replace value check with bit flag check.
Link: https://lore.kernel.org/r/20211026115412.27691-12-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently, firmware limits ELS payload to FC frame size/2112. This patch
adjusts memory buffer size to be able to handle max ELS payload.
Link: https://lore.kernel.org/r/20211026115412.27691-11-njavali@marvell.com
Fixes: 84318a9f01 ("scsi: qla2xxx: edif: Add send, receive, and accept for auth_els")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On ipsec start by remote port, target port may use RSCN to trigger
initiator to relogin. If driver is already in the process of a relogin,
then ignore the RSCN and allow the current relogin to continue. This
reduces thrashing of the connection.
Link: https://lore.kernel.org/r/20211026115412.27691-10-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For RSCN of type "Area, Domain, or Fabric", which indicate a portion or
entire fabric was disturbed, current driver does not set the scan_need flag
to indicate a session was affected by the disturbance. This in turn can
lead to I/O timeout and delay of relogin. Hence initiate relogin in the
event of fabric disturbance.
Link: https://lore.kernel.org/r/20211026115412.27691-2-njavali@marvell.com
Fixes: 1560bafdff ("scsi: qla2xxx: Use complete switch scan for RSCN events")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Merge the 5.15/scsi-fixes branch into the staging tree to resolve UFS
conflict reported by sfr.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In dual mode in case of disabling the target, the whole port goes offline
and initiator is turned off too.
Fix restoring initiator mode after disabling target in dual mode.
Link: https://lore.kernel.org/r/20210915153239.8035-1-d.bogdanov@yadro.com
Fixes: 0645cb8350 ("scsi: qla2xxx: Add mode control for each physical port")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
DPC thread gets restricted due to a no-op mailbox, which is a blocking call
and has a high execution frequency. To free up the DPC thread we move no-op
handling to the workqueue. Also, modified qla_do_heartbeat() to send no-op
MBC if we don’t have any active interrupts, but there are still I/Os
outstanding with firmware.
Link: https://lore.kernel.org/r/20210908164622.19240-9-njavali@marvell.com
Fixes: d94d8158e1 ("scsi: qla2xxx: Add heartbeat check")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Authentication application may be running and in the past tried to probe
driver (app_start) but was unsuccessful. This could be due to the bsg layer
not being ready to service the request. On a successful link up, driver
will use the netlink Link Up event to notify the app to retry the app_start
call.
In another case, app does not poll for new NPIV host. This link up event
would notify app of the presence of a new SCSI host.
Link: https://lore.kernel.org/r/20210908164622.19240-6-njavali@marvell.com
Fixes: 4de067e5df ("scsi: qla2xxx: edif: Add N2N support for EDIF")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For target port that register itself as both FCP + NVMe, initiator driver
will try to login one mode at a time. If the last mode did not succeed,
then driver will try the other mode.
When error is encountered, current code only flip to other mode one time
(NVMe->FCP) and remain on the last mode. Driver wrongly assumed target
port does not support PRLI NVMe, instead it was not ready to receive PRLI.
This patch will alternate back and forth on every PRLI failure until login
retry count has depleted or it is succeeded.
Link: https://lore.kernel.org/r/20210817051315.2477-10-njavali@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The abort callback gets called only when it gets posted to firmware. The
refcounting is done properly in the callback. On internal errors, the
callback is not invoked leading to a hung I/O. Fix this by having separate
error code when command gets returned from firmware.
Link: https://lore.kernel.org/r/20210817051315.2477-9-njavali@marvell.com
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently driver saves the personality type (FCP|NVMe) at the start of
first discovery of the remote device. If the remote device personality do
change over time, then qla driver needs to present that to user to decide.
Link: https://lore.kernel.org/r/20210817051315.2477-8-njavali@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For initiator mode, always do secure login when authentication app started.
Also remove redundant flags to indicate secure connection.
Link: https://lore.kernel.org/r/20210817051315.2477-7-njavali@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For EDIF + N2N to work, firmware 9.8 or later is required. The driver will
pause after PLOGI to allow app to authenticate. Once authentication
completes, app will tell driver to do PRLI.
Link: https://lore.kernel.org/r/20210817051315.2477-6-njavali@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Suppress logging of retryable errors. These can still be seen if extended
logging is enabled.
Link: https://lore.kernel.org/r/20210810043720.1137-11-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When user creates multiple NPIVs, the switch capabilities field is checked
before a vport is allowed to be created. This field is being toggled if a
switch scan is in progress. This creates erroneous reject of vport create.
Link: https://lore.kernel.org/r/20210810043720.1137-10-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some FC adapters from Marvell offer the ability to encrypt data in flight
(EDIF). This feature requires an application to act as an authenticator.
After the completion of PLOGI, both sides have authenticated and PRLI
completed, encrypted I/Os are allowed to proceed.
- Use new firmware API to encrypt traffic on the wire
- Add driver parameter to enable|disable EDIF feature
# modprobe qla2xxx ql2xsecenable=1
Link: https://lore.kernel.org/r/20210624052606.21613-10-njavali@marvell.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com>
Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com>
Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some FC adapters from Marvell offer the ability to encrypt data in flight
(EDIF). This feature requires an application to act as an authenticator.
During runtime, driver and authentication application need to stay in sync
in terms of: Session being down|up, arrival of new authentication
message (AUTH ELS) and SADB update completion.
These events are queued up as doorbell to the authentication
application. Application would read this doorbell on regular basis to stay
up to date. Each SCSI host would have a separate doorbell queue.
The doorbell interface can daisy chain a list of events for each read. Each
event contains an event code + hint to help application steer the next
course of action.
Link: https://lore.kernel.org/r/20210624052606.21613-9-njavali@marvell.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com>
Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com>
Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some FC adapters from Marvell offer the ability to encrypt data in flight
(EDIF). This feature requires an application to act as an authenticator.
There is no FC switch scan service that can indicate whether a device is
secure or non-secure.
In order to detect whether the remote port supports encrypted operation,
driver must first do a PLOGI with the remote device. On completion of the
PLOGI, driver will query firmware to see if the device supports secure
login. To do that, driver + firmware must advertise the security bit via
PLOGI's service parameter. The remote device shall respond using the same
service parameter whether it supports it or not.
Link: https://lore.kernel.org/r/20210624052606.21613-8-njavali@marvell.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com>
Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com>
Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some FC adapters from Marvell offer the ability to encrypt data in flight
(EDIF). This feature requires an application to act as an authenticator.
On completion of the authentication process, the authentication application
will notify driver on whether it is successful or not.
In case of success, application will use the QL_VND_SC_AUTH_OK BSG call to
tell driver to proceed to the PRLI phase.
In case of failure, application will use the QL_VND_SC_AUTH_FAIL bsg call
to tell driver to tear down the connection and retry. In the case where an
existing session is active, the re-key process can fail. The session tear
down ensures data is not further compromised.
Link: https://lore.kernel.org/r/20210624052606.21613-7-njavali@marvell.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com>
Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com>
Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some FC adapters from Marvell offer the ability to encrypt data in flight
(EDIF). This feature requires an application to act as an authenticator.
As part of the authentication process, the authentication application will
generate a SADB entry (Security Association/SA, key, SPI value, etc). This
SADB is then passed to driver to be programmed into hardware. There will be
a pair of SADB's (Tx and Rx) for each connection.
After some period, the application can choose to change the key. At that
time, a new set of SADB pair is given to driver. The old set of SADB will
be deleted.
Add a new bsg call (QL_VND_SC_SA_UPDATE) to allow application to allow
adding or deleting SADB entries. Driver will not keep the key in
memory. It will pass it to HW.
It is assumed that application will assign a unique SPI value to this SADB
(SA + key). Driver + hardware will assign a handle to track this unique
SPI/SADB.
Link: https://lore.kernel.org/r/20210624052606.21613-6-njavali@marvell.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com>
Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com>
Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use "no-op" mailbox command to check if the adapter firmware is still
responsive.
Link: https://lore.kernel.org/r/20210619052427.6440-1-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Variable rval is set to QLA_SUCCESS but this value is never read as it is
overwritten later on. Hence it is a redundant assignment and can be
removed.
Clean up the following clang-analyzer warning:
drivers/scsi/qla2xxx/qla_init.c:4359:2: warning: Value stored to 'rval'
is never read [clang-analyzer-deadcode.DeadStores].
Link: https://lore.kernel.org/r/1620643206-127930-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In a case when the initiator in P2P mode by some circumstances does not
send PRLI, the target, in a case when the target port's WWPN is less than
initiator's, changes the discovery state in DSC_GNL. When gnl completes it
sends PRLI to the initiator.
Usually the initiator in P2P mode always sends PRLI. We caught this issue
on Linux stable v5.4.6 https://www.spinics.net/lists/stable/msg458515.html.
Fix this particular corner case in the behaviour of the P2P mod target
login state machine.
Link: https://lore.kernel.org/r/20210422153414.4022-1-a.kovaleva@yadro.com
Fixes: a9ed06d4e6 ("scsi: qla2xxx: Allow PLOGI in target mode")
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Anastasia Kovaleva <a.kovaleva@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
After RISC RESET, the poll time for completion is too short. Fix the
completion polling time.
Link: https://lore.kernel.org/r/20210329085229.4367-8-njavali@marvell.com
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Session was stuck due to explicit logout to target timing out. The target
was in an unresponsive state. This timeout induced an error to the GNL
command from moving forward.
Link: https://lore.kernel.org/r/20210329085229.4367-4-njavali@marvell.com
Tested-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The host:channel:scsi_target_id information is helpful in matching an FC
port with a SCSI device, so add it. For initiator FC ports, a -1 would be
displayed for "target" part.
Link: https://lore.kernel.org/r/20210329085229.4367-3-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix below warnings reported by coccicheck:
./drivers/scsi/qla2xxx/qla_init.c:3371:2-7: WARNING: NULL check before
some freeing functions is not needed.
./drivers/scsi/qla2xxx/qla_init.c:7855:5-10: WARNING: NULL check before
some freeing functions is not needed.
./drivers/scsi/qla2xxx/qla_init.c:7916:2-7: WARNING: NULL check before
some freeing functions is not needed.
./drivers/scsi/qla2xxx/qla_init.c:8113:4-18: WARNING: NULL check before
some freeing functions is not needed.
./drivers/scsi/qla2xxx/qla_init.c:8174:2-7: WARNING: NULL check before
some freeing functions is not needed.
Link: https://lore.kernel.org/r/1611306174-92627-1-git-send-email-abaci-bugfix@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Yang Li <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Quinn Tran