The generic entry code has support for TIF_NOTIFY_SIGNAL already. Just
provide the TIF bit.
[ tglx: Adopted to other TIF changes in x86 ]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201026203230.386348-4-axboe@kernel.dk
The ia32_compat attribute is a weird thing. It mirrors TIF_IA32 and
TIF_X32 and is used only in two very unrelated places: (1) to decide if
the vsyscall page is accessible (2) for uprobes to find whether the
patched instruction is 32 or 64 bit.
In preparation to remove the TIF flags, a new mechanism is required for
ia32_compat, but given its odd semantics, adding a real flags field which
configures these specific behaviours is the best option.
So, set_personality_x64() can ask for the vsyscall page, which is not
available in x32/ia32 and set_personality_ia32() can configure the uprobe
code as needed.
uprobe cannot rely on other methods like user_64bit_mode() to decide how
to patch, so it needs some specific flag like this.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andy Lutomirski<luto@kernel.org>
Link: https://lore.kernel.org/r/20201004032536.1229030-10-krisman@collabora.com
Since TIF_X32 is going away, avoid using it to find the ELF type when
choosing which additional pages to set up.
According to SysV AMD64 ABI Draft, an AMD64 ELF object using ILP32 must
have ELFCLASS32 with (E_MACHINE == EM_X86_64), so use that ELF field to
differentiate a x32 object from a IA32 object when executing
setup_additional_pages() in compat mode.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201004032536.1229030-9-krisman@collabora.com
Since TIF_X32 is going away, avoid using it to find the ELF type in
compat_start_thread.
According to SysV AMD64 ABI Draft, an AMD64 ELF object using ILP32 must
have ELFCLASS32 with (E_MACHINE == EM_X86_64), so use that ELF field to
differentiate a x32 object from a IA32 object when executing start_thread()
in compat mode.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20201004032536.1229030-7-krisman@collabora.com
Since TIF_X32 is going away, avoid using it to find the ELF type on
ARCH_DLINFO.
According to SysV AMD64 ABI Draft, an AMD64 ELF object using ILP32 must
have ELFCLASS32 with (E_MACHINE == EM_X86_64), so use that ELF field to
differentiate a x32 object from a IA32 object when loading ARCH_DLINFO in
compat mode.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20201004032536.1229030-5-krisman@collabora.com
When allocating user memory space for a compat system call, don't consider
whether the originating code is IA32 or X32, just allocate from a safe
region for both, beyond the redzone. This should be safe for IA32, and has
the benefit of avoiding TIF_IA32, which is about to be removed.
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201004032536.1229030-3-krisman@collabora.com
Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.
Remove the quote operator # from compiler_attributes.h __section macro.
Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.
Conversion done using the script at:
https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Quoting https://gcc.gnu.org/onlinedocs/gcc/Local-Register-Variables.html:
You can define a local register variable and associate it with a
specified register...
The only supported use for this feature is to specify registers for
input and output operands when calling Extended asm (see Extended
Asm). This may be necessary if the constraints for a particular
machine don't provide sufficient control to select the desired
register.
On 32-bit x86, this is used to ensure that gcc will put an 8-byte value
into the %edx:%eax pair, while all other cases will just use the single
register %eax (%rax on x86-64). While the _ASM_AX actually just expands
to "%eax", note this comment next to get_user() which does something
very similar:
* The use of _ASM_DX as the register specifier is a bit of a
* simplification, as gcc only cares about it as the starting point
* and not size: for a 64-bit value it will use %ecx:%edx on 32 bits
* (%ecx being the next register in gcc's x86 register sequence), and
* %rdx on 64 bits.
However, getting this to work requires that there is no code between the
assignment to the local register variable and its use as an input to the
asm() which can possibly clobber any of the registers involved -
including evaluation of the expressions making up other inputs.
In the current code, the ptr expression used directly as an input may
cause such code to be emitted. For example, Sean Christopherson
observed that with KASAN enabled and ptr being current->set_child_tid
(from chedule_tail()), the load of current->set_child_tid causes a call
to __asan_load8() to be emitted immediately prior to the __put_user_4
call, and Naresh Kamboju reports that various mmstress tests fail on
KASAN-enabled builds.
It's also possible to synthesize a broken case without KASAN if one uses
"foo()" as the ptr argument, with foo being some "extern u64 __user
*foo(void);" (though I don't know if that appears in real code).
Fix it by making sure ptr gets evaluated before the assignment to
__val_pu, and add a comment that __val_pu must be the last thing
computed before the asm() is entered.
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: d55564cfc2 ("x86: Make __put_user() generate an out-of-line call")
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- New page table code for both hypervisor and guest stage-2
- Introduction of a new EL2-private host context
- Allow EL2 to have its own private per-CPU variables
- Support of PMU event filtering
- Complete rework of the Spectre mitigation
PPC:
- Fix for running nested guests with in-kernel IRQ chip
- Fix race condition causing occasional host hard lockup
- Minor cleanups and bugfixes
x86:
- allow trapping unknown MSRs to userspace
- allow userspace to force #GP on specific MSRs
- INVPCID support on AMD
- nested AMD cleanup, on demand allocation of nested SVM state
- hide PV MSRs and hypercalls for features not enabled in CPUID
- new test for MSR_IA32_TSC writes from host and guest
- cleanups: MMU, CPUID, shared MSRs
- LAPIC latency optimizations ad bugfixes
For x86, also included in this pull request is a new alternative and
(in the future) more scalable implementation of extended page tables
that does not need a reverse map from guest physical addresses to
host physical addresses. For now it is disabled by default because
it is still lacking a few of the existing MMU's bells and whistles.
However it is a very solid piece of work and it is already available
for people to hammer on it.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl+S8dsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroM40Af+M46NJmuS5rcwFfybvK/c42KT6svX
Co1NrZDwzSQ2mMy3WQzH9qeLvb+nbY4sT3n5BPNPNsT+aIDPOTDt//qJ2/Ip9UUs
tRNea0MAR96JWLE7MSeeRxnTaQIrw/AAZC0RXFzZvxcgytXwdqBExugw4im+b+dn
Dcz8QxX1EkwT+4lTm5HC0hKZAuo4apnK1QkqCq4SdD2QVJ1YE6+z7pgj4wX7xitr
STKD6q/Yt/0ndwqS0GSGbyg0jy6mE620SN6isFRkJYwqfwLJci6KnqvEK67EcNMu
qeE017K+d93yIVC46/6TfVHzLR/D1FpQ8LZ16Yl6S13OuGIfAWBkQZtPRg==
=AD6a
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"For x86, there is a new alternative and (in the future) more scalable
implementation of extended page tables that does not need a reverse
map from guest physical addresses to host physical addresses.
For now it is disabled by default because it is still lacking a few of
the existing MMU's bells and whistles. However it is a very solid
piece of work and it is already available for people to hammer on it.
Other updates:
ARM:
- New page table code for both hypervisor and guest stage-2
- Introduction of a new EL2-private host context
- Allow EL2 to have its own private per-CPU variables
- Support of PMU event filtering
- Complete rework of the Spectre mitigation
PPC:
- Fix for running nested guests with in-kernel IRQ chip
- Fix race condition causing occasional host hard lockup
- Minor cleanups and bugfixes
x86:
- allow trapping unknown MSRs to userspace
- allow userspace to force #GP on specific MSRs
- INVPCID support on AMD
- nested AMD cleanup, on demand allocation of nested SVM state
- hide PV MSRs and hypercalls for features not enabled in CPUID
- new test for MSR_IA32_TSC writes from host and guest
- cleanups: MMU, CPUID, shared MSRs
- LAPIC latency optimizations ad bugfixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (232 commits)
kvm: x86/mmu: NX largepage recovery for TDP MMU
kvm: x86/mmu: Don't clear write flooding count for direct roots
kvm: x86/mmu: Support MMIO in the TDP MMU
kvm: x86/mmu: Support write protection for nesting in tdp MMU
kvm: x86/mmu: Support disabling dirty logging for the tdp MMU
kvm: x86/mmu: Support dirty logging for the TDP MMU
kvm: x86/mmu: Support changed pte notifier in tdp MMU
kvm: x86/mmu: Add access tracking for tdp_mmu
kvm: x86/mmu: Support invalidate range MMU notifier for TDP MMU
kvm: x86/mmu: Allocate struct kvm_mmu_pages for all pages in TDP MMU
kvm: x86/mmu: Add TDP MMU PF handler
kvm: x86/mmu: Remove disallowed_hugepage_adjust shadow_walk_iterator arg
kvm: x86/mmu: Support zapping SPTEs in the TDP MMU
KVM: Cache as_id in kvm_memory_slot
kvm: x86/mmu: Add functions to handle changed TDP SPTEs
kvm: x86/mmu: Allocate and free TDP MMU roots
kvm: x86/mmu: Init / Uninit the TDP MMU
kvm: x86/mmu: Introduce tdp_iter
KVM: mmu: extract spte.h and spte.c
KVM: mmu: Separate updating a PTE from kvm_set_pte_rmapp
...
Attach struct kvm_mmu_pages to every page in the TDP MMU to track
metadata, facilitate NX reclaim, and enable inproved parallelism of MMU
operations in future patches.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-12-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull initial set_fs() removal from Al Viro:
"Christoph's set_fs base series + fixups"
* 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: Allow a NULL pos pointer to __kernel_read
fs: Allow a NULL pos pointer to __kernel_write
powerpc: remove address space overrides using set_fs()
powerpc: use non-set_fs based maccess routines
x86: remove address space overrides using set_fs()
x86: make TASK_SIZE_MAX usable from assembly code
x86: move PAGE_OFFSET, TASK_SIZE & friends to page_{32,64}_types.h
lkdtm: remove set_fs-based tests
test_bitmap: remove user bitmap tests
uaccess: add infrastructure for kernel builds with set_fs()
fs: don't allow splice read/write without explicit ops
fs: don't allow kernel reads and writes without iter ops
sysctl: Convert to iter interfaces
proc: add a read_iter method to proc proc_ops
proc: cleanup the compat vs no compat file ops
proc: remove a level of indentation in proc_get_inode
The TDP MMU must be able to allocate paging structure root pages and track
the usage of those pages. Implement a similar, but separate system for root
page allocation to that of the x86 shadow paging implementation. When
future patches add synchronization model changes to allow for parallel
page faults, these pages will need to be handled differently from the
x86 shadow paging based MMU's root pages.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The TDP MMU offers an alternative mode of operation to the x86 shadow
paging based MMU, optimized for running an L1 guest with TDP. The TDP MMU
will require new fields that need to be initialized and torn down. Add
hooks into the existing KVM MMU initialization process to do that
initialization / cleanup. Currently the initialization and cleanup
fucntions do not do very much, however more operations will be added in
future patches.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-4-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will be used to signal an error to the userspace, in case
the vendor code failed during handling of this msr. (e.g -ENOMEM)
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201001112954.6258-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As vcpu->arch.cpuid_entries is now allocated dynamically, the only
remaining use for KVM_MAX_CPUID_ENTRIES is to check KVM_SET_CPUID/
KVM_SET_CPUID2 input for sanity. Since it was reported that the
current limit (80) is insufficient for some CPUs, bump
KVM_MAX_CPUID_ENTRIES and use an arbitrary value '256' as the new
limit.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20201001130541.1398392-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The current limit for guest CPUID leaves (KVM_MAX_CPUID_ENTRIES, 80)
is reported to be insufficient but before we bump it let's switch to
allocating vcpu->arch.cpuid_entries[] array dynamically. Currently,
'struct kvm_cpuid_entry2' is 40 bytes so vcpu->arch.cpuid_entries is
3200 bytes which accounts for 1/4 of the whole 'struct kvm_vcpu_arch'
but having it pre-allocated (for all vCPUs which we also pre-allocate)
gives us no real benefits.
Another plus of the dynamic allocation is that we now do kvm_check_cpuid()
check before we assign anything to vcpu->arch.cpuid_nent/cpuid_entries so
no changes are made in case the check fails.
Opportunistically remove unneeded 'out' labels from
kvm_vcpu_ioctl_set_cpuid()/kvm_vcpu_ioctl_set_cpuid2() and return
directly whenever possible.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20201001130541.1398392-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
KVM unconditionally provides PV features to the guest, regardless of the
configured CPUID. An unwitting guest that doesn't check
KVM_CPUID_FEATURES before use could access paravirt features that
userspace did not intend to provide. Fix this by checking the guest's
CPUID before performing any paravirtual operations.
Introduce a capability, KVM_CAP_ENFORCE_PV_FEATURE_CPUID, to gate the
aforementioned enforcement. Migrating a VM from a host w/o this patch to
a host with this patch could silently change the ABI exposed to the
guest, warranting that we default to the old behavior and opt-in for
the new one.
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Change-Id: I202a0926f65035b872bfe8ad15307c026de59a98
Message-Id: <20200818152429.1923996-4-oupton@google.com>
Reviewed-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add redirect_neigh() BPF packet redirect helper, allowing to limit stack
traversal in common container configs and improving TCP back-pressure.
Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
Expand netlink policy support and improve policy export to user space.
(Ge)netlink core performs request validation according to declared
policies. Expand the expressiveness of those policies (min/max length
and bitmasks). Allow dumping policies for particular commands.
This is used for feature discovery by user space (instead of kernel
version parsing or trial and error).
Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge.
Allow more than 255 IPv4 multicast interfaces.
Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
packets of TCPv6.
In Multi-patch TCP (MPTCP) support concurrent transmission of data
on multiple subflows in a load balancing scenario. Enhance advertising
addresses via the RM_ADDR/ADD_ADDR options.
Support SMC-Dv2 version of SMC, which enables multi-subnet deployments.
Allow more calls to same peer in RxRPC.
Support two new Controller Area Network (CAN) protocols -
CAN-FD and ISO 15765-2:2016.
Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
kernel problem.
Add TC actions for implementing MPLS L2 VPNs.
Improve nexthop code - e.g. handle various corner cases when nexthop
objects are removed from groups better, skip unnecessary notifications
and make it easier to offload nexthops into HW by converting
to a blocking notifier.
Support adding and consuming TCP header options by BPF programs,
opening the doors for easy experimental and deployment-specific
TCP option use.
Reorganize TCP congestion control (CC) initialization to simplify life
of TCP CC implemented in BPF.
Add support for shipping BPF programs with the kernel and loading them
early on boot via the User Mode Driver mechanism, hence reusing all the
user space infra we have.
Support sleepable BPF programs, initially targeting LSM and tracing.
Add bpf_d_path() helper for returning full path for given 'struct path'.
Make bpf_tail_call compatible with bpf-to-bpf calls.
Allow BPF programs to call map_update_elem on sockmaps.
Add BPF Type Format (BTF) support for type and enum discovery, as
well as support for using BTF within the kernel itself (current use
is for pretty printing structures).
Support listing and getting information about bpf_links via the bpf
syscall.
Enhance kernel interfaces around NIC firmware update. Allow specifying
overwrite mask to control if settings etc. are reset during update;
report expected max time operation may take to users; support firmware
activation without machine reboot incl. limits of how much impact
reset may have (e.g. dropping link or not).
Extend ethtool configuration interface to report IEEE-standard
counters, to limit the need for per-vendor logic in user space.
Adopt or extend devlink use for debug, monitoring, fw update
in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw,
mv88e6xxx, dpaa2-eth).
In mlxsw expose critical and emergency SFP module temperature alarms.
Refactor port buffer handling to make the defaults more suitable and
support setting these values explicitly via the DCBNL interface.
Add XDP support for Intel's igb driver.
Support offloading TC flower classification and filtering rules to
mscc_ocelot switches.
Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
fixed interval period pulse generator and one-step timestamping in
dpaa-eth.
Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
offload.
Add Lynx PHY/PCS MDIO module, and convert various drivers which have
this HW to use it. Convert mvpp2 to split PCS.
Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
7-port Mediatek MT7531 IP.
Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
and wcn3680 support in wcn36xx.
Improve performance for packets which don't require much offloads
on recent Mellanox NICs by 20% by making multiple packets share
a descriptor entry.
Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto
subtree to drivers/net. Move MDIO drivers out of the phy directory.
Clean up a lot of W=1 warnings, reportedly the actively developed
subsections of networking drivers should now build W=1 warning free.
Make sure drivers don't use in_interrupt() to dynamically adapt their
code. Convert tasklets to use new tasklet_setup API (sadly this
conversion is not yet complete).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=bc1U
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
- Add redirect_neigh() BPF packet redirect helper, allowing to limit
stack traversal in common container configs and improving TCP
back-pressure.
Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
- Expand netlink policy support and improve policy export to user
space. (Ge)netlink core performs request validation according to
declared policies. Expand the expressiveness of those policies
(min/max length and bitmasks). Allow dumping policies for particular
commands. This is used for feature discovery by user space (instead
of kernel version parsing or trial and error).
- Support IGMPv3/MLDv2 multicast listener discovery protocols in
bridge.
- Allow more than 255 IPv4 multicast interfaces.
- Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
packets of TCPv6.
- In Multi-patch TCP (MPTCP) support concurrent transmission of data on
multiple subflows in a load balancing scenario. Enhance advertising
addresses via the RM_ADDR/ADD_ADDR options.
- Support SMC-Dv2 version of SMC, which enables multi-subnet
deployments.
- Allow more calls to same peer in RxRPC.
- Support two new Controller Area Network (CAN) protocols - CAN-FD and
ISO 15765-2:2016.
- Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
kernel problem.
- Add TC actions for implementing MPLS L2 VPNs.
- Improve nexthop code - e.g. handle various corner cases when nexthop
objects are removed from groups better, skip unnecessary
notifications and make it easier to offload nexthops into HW by
converting to a blocking notifier.
- Support adding and consuming TCP header options by BPF programs,
opening the doors for easy experimental and deployment-specific TCP
option use.
- Reorganize TCP congestion control (CC) initialization to simplify
life of TCP CC implemented in BPF.
- Add support for shipping BPF programs with the kernel and loading
them early on boot via the User Mode Driver mechanism, hence reusing
all the user space infra we have.
- Support sleepable BPF programs, initially targeting LSM and tracing.
- Add bpf_d_path() helper for returning full path for given 'struct
path'.
- Make bpf_tail_call compatible with bpf-to-bpf calls.
- Allow BPF programs to call map_update_elem on sockmaps.
- Add BPF Type Format (BTF) support for type and enum discovery, as
well as support for using BTF within the kernel itself (current use
is for pretty printing structures).
- Support listing and getting information about bpf_links via the bpf
syscall.
- Enhance kernel interfaces around NIC firmware update. Allow
specifying overwrite mask to control if settings etc. are reset
during update; report expected max time operation may take to users;
support firmware activation without machine reboot incl. limits of
how much impact reset may have (e.g. dropping link or not).
- Extend ethtool configuration interface to report IEEE-standard
counters, to limit the need for per-vendor logic in user space.
- Adopt or extend devlink use for debug, monitoring, fw update in many
drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
dpaa2-eth).
- In mlxsw expose critical and emergency SFP module temperature alarms.
Refactor port buffer handling to make the defaults more suitable and
support setting these values explicitly via the DCBNL interface.
- Add XDP support for Intel's igb driver.
- Support offloading TC flower classification and filtering rules to
mscc_ocelot switches.
- Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
fixed interval period pulse generator and one-step timestamping in
dpaa-eth.
- Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
offload.
- Add Lynx PHY/PCS MDIO module, and convert various drivers which have
this HW to use it. Convert mvpp2 to split PCS.
- Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
7-port Mediatek MT7531 IP.
- Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
and wcn3680 support in wcn36xx.
- Improve performance for packets which don't require much offloads on
recent Mellanox NICs by 20% by making multiple packets share a
descriptor entry.
- Move chelsio inline crypto drivers (for TLS and IPsec) from the
crypto subtree to drivers/net. Move MDIO drivers out of the phy
directory.
- Clean up a lot of W=1 warnings, reportedly the actively developed
subsections of networking drivers should now build W=1 warning free.
- Make sure drivers don't use in_interrupt() to dynamically adapt their
code. Convert tasklets to use new tasklet_setup API (sadly this
conversion is not yet complete).
* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
net, sockmap: Don't call bpf_prog_put() on NULL pointer
bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
bpf, sockmap: Add locking annotations to iterator
netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
net: fix pos incrementment in ipv6_route_seq_next
net/smc: fix invalid return code in smcd_new_buf_create()
net/smc: fix valid DMBE buffer sizes
net/smc: fix use-after-free of delayed events
bpfilter: Fix build error with CONFIG_BPFILTER_UMH
cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
bpf: Fix register equivalence tracking.
rxrpc: Fix loss of final ack on shutdown
rxrpc: Fix bundle counting for exclusive connections
netfilter: restore NF_INET_NUMHOOKS
ibmveth: Identify ingress large send packets.
ibmveth: Switch order of ibmveth_helper calls.
cxgb4: handle 4-tuple PEDIT to NAT mode translation
selftests: Add VRF route leaking tests
...
- Add support for "bool" type in synthetic events
- Add per instance tracing for bootconfig
- Support perf-style return probe ("SYMBOL%return") in kprobes and uprobes
- Allow for kprobes to be enabled earlier in boot up
- Added tracepoint helper function to allow testing if tracepoints are
enabled in headers
- Synthetic events can now have dynamic strings (variable length)
- Various fixes and cleanups
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCX4iMDRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qrMPAP0UAfOeQcYxBAw9y8oX7oJnBBylLFTR
CICOVEhBYC/xIQD/edVPEUt77ozM/Bplwv8BiO4QxFjgZFqtpZI8mskIfAo=
=sbny
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"Updates for tracing and bootconfig:
- Add support for "bool" type in synthetic events
- Add per instance tracing for bootconfig
- Support perf-style return probe ("SYMBOL%return") in kprobes and
uprobes
- Allow for kprobes to be enabled earlier in boot up
- Added tracepoint helper function to allow testing if tracepoints
are enabled in headers
- Synthetic events can now have dynamic strings (variable length)
- Various fixes and cleanups"
* tag 'trace-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (58 commits)
tracing: support "bool" type in synthetic trace events
selftests/ftrace: Add test case for synthetic event syntax errors
tracing: Handle synthetic event array field type checking correctly
selftests/ftrace: Change synthetic event name for inter-event-combined test
tracing: Add synthetic event error logging
tracing: Check that the synthetic event and field names are legal
tracing: Move is_good_name() from trace_probe.h to trace.h
tracing: Don't show dynamic string internals in synthetic event description
tracing: Fix some typos in comments
tracing/boot: Add ftrace.instance.*.alloc_snapshot option
tracing: Fix race in trace_open and buffer resize call
tracing: Check return value of __create_val_fields() before using its result
tracing: Fix synthetic print fmt check for use of __get_str()
tracing: Remove a pointless assignment
ftrace: ftrace_global_list is renamed to ftrace_ops_list
ftrace: Format variable declarations of ftrace_allocate_records
ftrace: Simplify the calculation of page number for ftrace_page->records
ftrace: Simplify the dyn_ftrace->flags macro
ftrace: Simplify the hash calculation
ftrace: Use fls() to get the bits for dup_hash()
...
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAl+IfF4THHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXgdnCACUnI5sKbEN/uEvWz4JGJzTSwr20VHt
FkzpbeS4A9vHgl4hXVvGc4eMrwF/RtWY6RrLlJauZSQA1mjU0paAjf2noBFYX41m
zHX6f8awJrPd0cFChrOKcAlPnQy5OHYTJb7id2EakGGIrd0rmR/TkVAdEku23SDD
N7wheh5dVLnkSPwfiERz8Iq0CswMrSjgTljKnwU7XqUqwcNt+7rLRDFAH/M3NG/x
omBrWO8k6t2r0h4otqCQZIyCSLwPO+Wdb9BSaA147eOFHHbhqZlHNJYjIkMROZau
CJn7S0nZorsAUvka3l7W8nyMQmK4PXOh36bwkXzpkV4b+lgit0euXIzA
=H2vc
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull another Hyper-V update from Wei Liu:
"One patch from Michael to get VMbus interrupt from ACPI DSDT"
* tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: vmbus: Add parsing of VMbus interrupt in ACPI DSDT
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common
code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
-----BEGIN PGP SIGNATURE-----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=Bkf/
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
* tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits)
ARM/ixp4xx: add a missing include of dma-map-ops.h
dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling
dma-direct: factor out a dma_direct_alloc_from_pool helper
dma-direct check for highmem pages in dma_direct_alloc_pages
dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h>
dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma
dma-mapping: move dma-debug.h to kernel/dma/
dma-mapping: remove <asm/dma-contiguous.h>
dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h>
dma-contiguous: remove dma_contiguous_set_default
dma-contiguous: remove dev_set_cma_area
dma-contiguous: remove dma_declare_contiguous
dma-mapping: split <linux/dma-mapping.h>
cma: decrease CMA_ALIGNMENT lower limit to 2
firewire-ohci: use dma_alloc_pages
dma-iommu: implement ->alloc_noncoherent
dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods
dma-mapping: add a new dma_alloc_pages API
dma-mapping: remove dma_cache_sync
53c700: convert to dma_alloc_noncoherent
...
On ARM64, Hyper-V now specifies the interrupt to be used by VMbus
in the ACPI DSDT. This information is not used on x86 because the
interrupt vector must be hardcoded. But update the generic
VMbus driver to do the parsing and pass the information to the
architecture specific code that sets up the Linux IRQ. Update
consumers of the interrupt to get it from an architecture specific
function.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1597434304-40631-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
- Add support for generic initiator-only proximity domains to
the ACPI NUMA code and the architectures using it (Jonathan
Cameron).
- Clean up some non-ACPICA code referring to debug facilities from
ACPICA that are not actually used in there (Hanjun Guo).
- Add new DPTF driver for the PCH FIVR participant (Srinivas
Pandruvada).
- Reduce overhead related to accessing GPE registers in ACPICA and
the OS interface layer and make it possible to access GPE registers
using logical addresses if they are memory-mapped (Rafael Wysocki).
- Update the ACPICA code in the kernel to upstream revision 20200925
including changes as follows:
* Add predefined names from the SMBus sepcification (Bob Moore).
* Update acpi_help UUID list (Bob Moore).
* Return exceptions for string-to-integer conversions in iASL (Bob
Moore).
* Add a new "ALL <NameSeg>" debugger command (Bob Moore).
* Add support for 64 bit risc-v compilation (Colin Ian King).
* Do assorted cleanups (Bob Moore, Colin Ian King, Randy Dunlap).
- Add new ACPI backlight whitelist entry for HP 635 Notebook (Alex
Hung).
- Move TPS68470 OpRegion driver to drivers/acpi/pmic/ and split out
Kconfig and Makefile specific for ACPI PMIC (Andy Shevchenko).
- Clean up the ACPI SoC driver for AMD SoCs (Hanjun Guo).
- Add missing config_item_put() to fix refcount leak (Hanjun Guo).
- Drop lefrover field from struct acpi_memory_device (Hanjun Guo).
- Make the ACPI extlog driver check for RDMSR failures (Ben
Hutchings).
- Fix handling of lid state changes in the ACPI button driver when
input device is closed (Dmitry Torokhov).
- Fix several assorted build issues (Barnabás Pőcze, John Garry,
Nathan Chancellor, Tian Tao).
- Drop unused inline functions and reduce code duplication by using
kobj_to_dev() in the NFIT parsing code (YueHaibing, Wang Qing).
- Serialize tools/power/acpi Makefile (Thomas Renninger).
-----BEGIN PGP SIGNATURE-----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=feLU
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These add support for generic initiator-only proximity domains to the
ACPI NUMA code and the architectures using it, clean up some
non-ACPICA code referring to debug facilities from ACPICA, reduce the
overhead related to accessing GPE registers, add a new DPTF (Dynamic
Power and Thermal Framework) participant driver, update the ACPICA
code in the kernel to upstream revision 20200925, add a new ACPI
backlight whitelist entry, fix a few assorted issues and clean up some
code.
Specifics:
- Add support for generic initiator-only proximity domains to the
ACPI NUMA code and the architectures using it (Jonathan Cameron)
- Clean up some non-ACPICA code referring to debug facilities from
ACPICA that are not actually used in there (Hanjun Guo)
- Add new DPTF driver for the PCH FIVR participant (Srinivas
Pandruvada)
- Reduce overhead related to accessing GPE registers in ACPICA and
the OS interface layer and make it possible to access GPE registers
using logical addresses if they are memory-mapped (Rafael Wysocki)
- Update the ACPICA code in the kernel to upstream revision 20200925
including changes as follows:
+ Add predefined names from the SMBus sepcification (Bob Moore)
+ Update acpi_help UUID list (Bob Moore)
+ Return exceptions for string-to-integer conversions in iASL (Bob
Moore)
+ Add a new "ALL <NameSeg>" debugger command (Bob Moore)
+ Add support for 64 bit risc-v compilation (Colin Ian King)
+ Do assorted cleanups (Bob Moore, Colin Ian King, Randy Dunlap)
- Add new ACPI backlight whitelist entry for HP 635 Notebook (Alex
Hung)
- Move TPS68470 OpRegion driver to drivers/acpi/pmic/ and split out
Kconfig and Makefile specific for ACPI PMIC (Andy Shevchenko)
- Clean up the ACPI SoC driver for AMD SoCs (Hanjun Guo)
- Add missing config_item_put() to fix refcount leak (Hanjun Guo)
- Drop lefrover field from struct acpi_memory_device (Hanjun Guo)
- Make the ACPI extlog driver check for RDMSR failures (Ben
Hutchings)
- Fix handling of lid state changes in the ACPI button driver when
input device is closed (Dmitry Torokhov)
- Fix several assorted build issues (Barnabás Pőcze, John Garry,
Nathan Chancellor, Tian Tao)
- Drop unused inline functions and reduce code duplication by using
kobj_to_dev() in the NFIT parsing code (YueHaibing, Wang Qing)
- Serialize tools/power/acpi Makefile (Thomas Renninger)"
* tag 'acpi-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
ACPICA: Update version to 20200925 Version 20200925
ACPICA: Remove unnecessary semicolon
ACPICA: Debugger: Add a new command: "ALL <NameSeg>"
ACPICA: iASL: Return exceptions for string-to-integer conversions
ACPICA: acpi_help: Update UUID list
ACPICA: Add predefined names found in the SMBus sepcification
ACPICA: Tree-wide: fix various typos and spelling mistakes
ACPICA: Drop the repeated word "an" in a comment
ACPICA: Add support for 64 bit risc-v compilation
ACPI: button: fix handling lid state changes when input device closed
tools/power/acpi: Serialize Makefile
ACPI: scan: Replace ACPI_DEBUG_PRINT() with pr_debug()
ACPI: memhotplug: Remove 'state' from struct acpi_memory_device
ACPI / extlog: Check for RDMSR failure
ACPI: Make acpi_evaluate_dsm() prototype consistent
docs: mm: numaperf.rst Add brief description for access class 1.
node: Add access1 class to represent CPU to memory characteristics
ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3
ACPI: Let ACPI know we support Generic Initiator Affinity Structures
x86: Support Generic Initiator only proximity domains
...
called SEV by also encrypting the guest register state, making the
registers inaccessible to the hypervisor by en-/decrypting them on world
switches. Thus, it adds additional protection to Linux guests against
exfiltration, control flow and rollback attacks.
With SEV-ES, the guest is in full control of what registers the
hypervisor can access. This is provided by a guest-host exchange
mechanism based on a new exception vector called VMM Communication
Exception (#VC), a new instruction called VMGEXIT and a shared
Guest-Host Communication Block which is a decrypted page shared between
the guest and the hypervisor.
Intercepts to the hypervisor become #VC exceptions in an SEV-ES guest so
in order for that exception mechanism to work, the early x86 init code
needed to be made able to handle exceptions, which, in itself, brings
a bunch of very nice cleanups and improvements to the early boot code
like an early page fault handler, allowing for on-demand building of the
identity mapping. With that, !KASLR configurations do not use the EFI
page table anymore but switch to a kernel-controlled one.
The main part of this series adds the support for that new exchange
mechanism. The goal has been to keep this as much as possibly
separate from the core x86 code by concentrating the machinery in two
SEV-ES-specific files:
arch/x86/kernel/sev-es-shared.c
arch/x86/kernel/sev-es.c
Other interaction with core x86 code has been kept at minimum and behind
static keys to minimize the performance impact on !SEV-ES setups.
Work by Joerg Roedel and Thomas Lendacky and others.
-----BEGIN PGP SIGNATURE-----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=toqi
-----END PGP SIGNATURE-----
Merge tag 'x86_seves_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV-ES support from Borislav Petkov:
"SEV-ES enhances the current guest memory encryption support called SEV
by also encrypting the guest register state, making the registers
inaccessible to the hypervisor by en-/decrypting them on world
switches. Thus, it adds additional protection to Linux guests against
exfiltration, control flow and rollback attacks.
With SEV-ES, the guest is in full control of what registers the
hypervisor can access. This is provided by a guest-host exchange
mechanism based on a new exception vector called VMM Communication
Exception (#VC), a new instruction called VMGEXIT and a shared
Guest-Host Communication Block which is a decrypted page shared
between the guest and the hypervisor.
Intercepts to the hypervisor become #VC exceptions in an SEV-ES guest
so in order for that exception mechanism to work, the early x86 init
code needed to be made able to handle exceptions, which, in itself,
brings a bunch of very nice cleanups and improvements to the early
boot code like an early page fault handler, allowing for on-demand
building of the identity mapping. With that, !KASLR configurations do
not use the EFI page table anymore but switch to a kernel-controlled
one.
The main part of this series adds the support for that new exchange
mechanism. The goal has been to keep this as much as possibly separate
from the core x86 code by concentrating the machinery in two
SEV-ES-specific files:
arch/x86/kernel/sev-es-shared.c
arch/x86/kernel/sev-es.c
Other interaction with core x86 code has been kept at minimum and
behind static keys to minimize the performance impact on !SEV-ES
setups.
Work by Joerg Roedel and Thomas Lendacky and others"
* tag 'x86_seves_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (73 commits)
x86/sev-es: Use GHCB accessor for setting the MMIO scratch buffer
x86/sev-es: Check required CPU features for SEV-ES
x86/efi: Add GHCB mappings when SEV-ES is active
x86/sev-es: Handle NMI State
x86/sev-es: Support CPU offline/online
x86/head/64: Don't call verify_cpu() on starting APs
x86/smpboot: Load TSS and getcpu GDT entry before loading IDT
x86/realmode: Setup AP jump table
x86/realmode: Add SEV-ES specific trampoline entry point
x86/vmware: Add VMware-specific handling for VMMCALL under SEV-ES
x86/kvm: Add KVM-specific VMMCALL handling under SEV-ES
x86/paravirt: Allow hypervisor-specific VMMCALL handling under SEV-ES
x86/sev-es: Handle #DB Events
x86/sev-es: Handle #AC Events
x86/sev-es: Handle VMMCALL Events
x86/sev-es: Handle MWAIT/MWAITX Events
x86/sev-es: Handle MONITOR/MONITORX Events
x86/sev-es: Handle INVD Events
x86/sev-es: Handle RDPMC Events
x86/sev-es: Handle RDTSC(P) Events
...
- Most of the changes are cleanups and reorganization to make the objtool code
more arch-agnostic. This is in preparation for non-x86 support.
Fixes:
- KASAN fixes.
- Handle unreachable trap after call to noreturn functions better.
- Ignore unreachable fake jumps.
- Misc smaller fixes & cleanups.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=KX5o
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2020-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
"Most of the changes are cleanups and reorganization to make the
objtool code more arch-agnostic. This is in preparation for non-x86
support.
Other changes:
- KASAN fixes
- Handle unreachable trap after call to noreturn functions better
- Ignore unreachable fake jumps
- Misc smaller fixes & cleanups"
* tag 'objtool-core-2020-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
perf build: Allow nested externs to enable BUILD_BUG() usage
objtool: Allow nested externs to enable BUILD_BUG()
objtool: Permit __kasan_check_{read,write} under UACCESS
objtool: Ignore unreachable trap after call to noreturn functions
objtool: Handle calling non-function symbols in other sections
objtool: Ignore unreachable fake jumps
objtool: Remove useless tests before save_reg()
objtool: Decode unwind hint register depending on architecture
objtool: Make unwind hint definitions available to other architectures
objtool: Only include valid definitions depending on source file type
objtool: Rename frame.h -> objtool.h
objtool: Refactor jump table code to support other architectures
objtool: Make relocation in alternative handling arch dependent
objtool: Abstract alternative special case handling
objtool: Move macros describing structures to arch-dependent code
objtool: Make sync-check consider the target architecture
objtool: Group headers to check in a single list
objtool: Define 'struct orc_entry' only when needed
objtool: Skip ORC entry creation for non-text sections
objtool: Move ORC logic out of check()
...
Patch series "device-dax: Support sub-dividing soft-reserved ranges", v5.
The device-dax facility allows an address range to be directly mapped
through a chardev, or optionally hotplugged to the core kernel page
allocator as System-RAM. It is the mechanism for converting persistent
memory (pmem) to be used as another volatile memory pool i.e. the current
Memory Tiering hot topic on linux-mm.
In the case of pmem the nvdimm-namespace-label mechanism can sub-divide
it, but that labeling mechanism is not available / applicable to
soft-reserved ("EFI specific purpose") memory [3]. This series provides a
sysfs-mechanism for the daxctl utility to enable provisioning of
volatile-soft-reserved memory ranges.
The motivations for this facility are:
1/ Allow performance differentiated memory ranges to be split between
kernel-managed and directly-accessed use cases.
2/ Allow physical memory to be provisioned along performance relevant
address boundaries. For example, divide a memory-side cache [4] along
cache-color boundaries.
3/ Parcel out soft-reserved memory to VMs using device-dax as a security
/ permissions boundary [5]. Specifically I have seen people (ab)using
memmap=nn!ss (mark System-RAM as Persistent Memory) just to get the
device-dax interface on custom address ranges. A follow-on for the VM
use case is to teach device-dax to dynamically allocate 'struct page' at
runtime to reduce the duplication of 'struct page' space in both the
guest and the host kernel for the same physical pages.
[2]: http://lore.kernel.org/r/20200713160837.13774-11-joao.m.martins@oracle.com
[3]: http://lore.kernel.org/r/157309097008.1579826.12818463304589384434.stgit@dwillia2-desk3.amr.corp.intel.com
[4]: http://lore.kernel.org/r/154899811738.3165233.12325692939590944259.stgit@dwillia2-desk3.amr.corp.intel.com
[5]: http://lore.kernel.org/r/20200110190313.17144-1-joao.m.martins@oracle.com
This patch (of 23):
In preparation for adding a new numa= option clean up the existing ones to
avoid ifdefs in numa_setup(), and provide feedback when the option is
numa=fake= option is invalid due to kernel config. The same does not need
to be done for numa=noacpi, since the capability is already hard disabled
at compile-time.
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brice Goglin <Brice.Goglin@inria.fr>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Jia He <justin.he@arm.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Will Deacon <will@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Hulk Robot <hulkci@huawei.com>
Cc: Jason Yan <yanaijie@huawei.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Link: https://lkml.kernel.org/r/160106109960.30709.7379926726669669398.stgit@dwillia2-desk3.amr.corp.intel.com
Link: https://lkml.kernel.org/r/159643094279.4062302.17779410714418721328.stgit@dwillia2-desk3.amr.corp.intel.com
Link: https://lkml.kernel.org/r/159643094925.4062302.14979872973043772305.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
the .fixup section, by Uros Bizjak.
* Replace __force_order dummy variable with a memory clobber to fix LLVM
requiring a definition for former and to prevent memory accesses from
still being cached/reordered, by Arvind Sankar.
-----BEGIN PGP SIGNATURE-----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=8moV
-----END PGP SIGNATURE-----
Merge tag 'x86_asm_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm updates from Borislav Petkov:
"Two asm wrapper fixes:
- Use XORL instead of XORQ to avoid a REX prefix and save some bytes
in the .fixup section, by Uros Bizjak.
- Replace __force_order dummy variable with a memory clobber to fix
LLVM requiring a definition for former and to prevent memory
accesses from still being cached/reordered, by Arvind Sankar"
* tag 'x86_asm_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Replace __force_order with a memory clobber
x86/uaccess: Use XORL %0,%0 in __get_user_asm()
* acpi-numa:
docs: mm: numaperf.rst Add brief description for access class 1.
node: Add access1 class to represent CPU to memory characteristics
ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3
ACPI: Let ACPI know we support Generic Initiator Affinity Structures
x86: Support Generic Initiator only proximity domains
ACPI: Support Generic Initiator only domains
ACPI / NUMA: Add stub function for pxm_to_node()
irq-chip/gic-v3-its: Fix crash if ITS is in a proximity domain without processor or memory
ACPI: Remove side effect of partly creating a node in acpi_get_node()
ACPI: Rename acpi_map_pxm_to_online_node() to pxm_to_online_node()
ACPI: Remove side effect of partly creating a node in acpi_map_pxm_to_online_node()
ACPI: Do not create new NUMA domains from ACPI static tables that are not SRAT
ACPI: Add out of bounds and numa_off protections to pxm_to_node()
Clang-11 shipped support for outputs to asm goto statments along the
fallthrough path. Double up some of the get_user() and related macros
to be able to take advantage of this extended GNU C extension. This
should help improve the generated code's performance for these accesses.
Cc: Bill Wendling <morbo@google.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of inlining the stac/mov/clac sequence (which also requires
individual exception table entries and several asm instruction
alternatives entries), just generate "call __put_user_nocheck_X" for the
__put_user() cases, the same way we changed __get_user earlier.
Unlike the get_user() case, we didn't have the same nice infrastructure
to just generate the call with a single case, so this actually has to
change some of the infrastructure in order to do this. But that only
cleans up the code further.
So now, instead of using a case statement for the sizes, we just do the
same thing we've done on the get_user() side for a long time: use the
size as an immediate constant to the asm, and generate the asm that way
directly.
In order to handle the special case of 64-bit data on a 32-bit kernel, I
needed to change the calling convention slightly: the data is passed in
%eax[:%edx], the pointer in %ecx, and the return value is also returned
in %ecx. It used to be returned in %eax, but because of how %eax can
now be a double register input, we don't want mix that with a
single-register output.
The actual low-level asm is easier to handle: we'll just share the code
between the checking and non-checking case, with the non-checking case
jumping into the middle of the function. That may sound a bit too
special, but this code is all very very special anyway, so...
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of inlining the whole stac/lfence/mov/clac sequence (which also
requires individual exception table entries and several asm instruction
alternatives entries), just generate "call __get_user_nocheck_X" for the
__get_user() cases.
We can use all the same infrastructure that we already do for the
regular "get_user()", and the end result is simpler source code, and
much simpler code generation.
It also means that when I introduce asm goto with input for
"unsafe_get_user()", there are no nasty interactions with the
__get_user() code.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull compat quotactl cleanups from Al Viro:
"More Christoph's compat cleanups: quotactl(2)"
* 'work.quota-compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
quota: simplify the quotactl compat handling
compat: add a compat_need_64bit_alignment_fixup() helper
compat: lift compat_s64 and compat_u64 to <asm-generic/compat.h>
Pull copy_and_csum cleanups from Al Viro:
"Saner calling conventions for csum_and_copy_..._user() and friends"
[ Removing 800+ lines of code and cleaning stuff up is good - Linus ]
* 'work.csum_and_copy' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ppc: propagate the calling conventions change down to csum_partial_copy_generic()
amd64: switch csum_partial_copy_generic() to new calling conventions
sparc64: propagate the calling convention changes down to __csum_partial_copy_...()
xtensa: propagate the calling conventions change down into csum_partial_copy_generic()
mips: propagate the calling convention change down into __csum_partial_copy_..._user()
mips: __csum_partial_copy_kernel() has no users left
mips: csum_and_copy_{to,from}_user() are never called under KERNEL_DS
sparc32: propagate the calling conventions change down to __csum_partial_copy_sparc_generic()
i386: propagate the calling conventions change down to csum_partial_copy_generic()
sh: propage the calling conventions change down to csum_partial_copy_generic()
m68k: get rid of zeroing destination on error in csum_and_copy_from_user()
arm: propagate the calling convention changes down to csum_partial_copy_from_user()
alpha: propagate the calling convention changes down to csum_partial_copy.c helpers
saner calling conventions for csum_and_copy_..._user()
csum_and_copy_..._user(): pass 0xffffffff instead of 0 as initial sum
csum_partial_copy_nocheck(): drop the last argument
unify generic instances of csum_partial_copy_nocheck()
icmp_push_reply(): reorder adding the checksum up
skb_copy_and_csum_bits(): don't bother with the last argument
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=MO7a
-----END PGP SIGNATURE-----
Merge tag 'x86-hyperv-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 Hyper-V update from Ingo Molnar:
"A single commit harmonizing the x86 and ARM64 Hyper-V constants
namespace"
* tag 'x86-hyperv-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/hyperv: Remove aliases with X64 in their name
Hopefully now without the bugs!
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=tVAw
-----END PGP SIGNATURE-----
Merge tag 'x86-mm-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Ingo Molnar:
"Do not sync vmalloc/ioremap mappings on x86-64 kernels.
Hopefully now without the bugs!"
* tag 'x86-mm-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm/64: Update comment in preallocate_vmalloc_pages()
x86/mm/64: Do not sync vmalloc/ioremap mappings
x86 Intel updates:
- Add Jasper Lake support
- Add support for TopDown metrics on Ice Lake
- Fix Ice Lake & Tiger Lake uncore support, add Snow Ridge support
- Add a PCI sub driver to support uncore PMUs where the PCI resources
have been claimed already - extending the range of supported systems.
x86 AMD updates:
- Restore 'perf stat -a' behaviour to program the uncore PMU
to count all CPU threads.
- Fix setting the proper count when sampling Large Increment
per Cycle events / 'paired' events.
- Fix IBS Fetch sampling on F17h and some other IBS fine tuning,
greatly reducing the number of interrupts when large sample
periods are specified.
- Extends Family 17h RAPL support to also work on compatible
F19h machines.
Core code updates:
- Fix race in perf_mmap_close()
- Add PERF_EV_CAP_SIBLING, to denote that sibling events should be
closed if the leader is removed.
- Smaller fixes and updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAl+Ef40RHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1h7NQ//ZdQ26Yg79ZaxBX1QSINJ9AgXDi6rXs75
qU9qNwr/6EF+633RZoPQGAE0Iy5v6h7iLFokcJzM9+kK/rE3ax44tSnPlcMa0+6N
SHXKCa5iL+hH7o2Spo2MZwCYseH79rloX3TSH7ajnN3X8PvwgWshF0lUE3WEWtCs
eHSojdCk43IuL9TpusuNOBM2FvgnheFYWiMbFHd0MTBUMxul30sLVCG8IIWCPA+q
TwG4RJS3X42VbL3SuAGFmOv4OmqNsfkvHvjpDs4NF07tRB9zjXzGrxmGhgSw0NAN
2KK25qbmrpKATIb4Eqsgk/yikX/SCrDEXrjhg3r8FnyPvRfctq1crZjjf672PI2E
bDda76dH6Lq9jv5fsyJjas5OsYdMKBCnA+tGQxXPGbmTXeEcYMRbDnwhYnevI/Q/
8pP+xstF0pmBA3tvpDPrQnYH72Qt7CLJSdcTB15NqZftU2tJxaAyJGx4gJy33jxQ
wu6BIEGHQ7onQYiIyTwsBHyz6xNsF/CRHwAPcGdYrRRbXB5K5nxHiXNb4awciTMx
2HF31/S4OqURNpfcpxOQo+1fb/cLqj3loGqE4jCTwkbS3lrHcAcfxyv9QNn77l1f
hdQ0jworbUNVLUYEUQz1bkZ06GD3LSSas2ZlY1NNdHo62mjyXMQmgirNcZmrFgWl
tl2gNFAU9x4=
=2fuY
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
"x86 Intel updates:
- Add Jasper Lake support
- Add support for TopDown metrics on Ice Lake
- Fix Ice Lake & Tiger Lake uncore support, add Snow Ridge support
- Add a PCI sub driver to support uncore PMUs where the PCI resources
have been claimed already - extending the range of supported
systems.
x86 AMD updates:
- Restore 'perf stat -a' behaviour to program the uncore PMU to count
all CPU threads.
- Fix setting the proper count when sampling Large Increment per
Cycle events / 'paired' events.
- Fix IBS Fetch sampling on F17h and some other IBS fine tuning,
greatly reducing the number of interrupts when large sample periods
are specified.
- Extends Family 17h RAPL support to also work on compatible F19h
machines.
Core code updates:
- Fix race in perf_mmap_close()
- Add PERF_EV_CAP_SIBLING, to denote that sibling events should be
closed if the leader is removed.
- Smaller fixes and updates"
* tag 'perf-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits)
perf/core: Fix race in the perf_mmap_close() function
perf/x86: Fix n_metric for cancelled txn
perf/x86: Fix n_pair for cancelled txn
x86/events/amd/iommu: Fix sizeof mismatch
perf/x86/intel: Check perf metrics feature for each CPU
perf/x86/intel: Fix Ice Lake event constraint table
perf/x86/intel/uncore: Fix the scale of the IMC free-running events
perf/x86/intel/uncore: Fix for iio mapping on Skylake Server
perf/x86/msr: Add Jasper Lake support
perf/x86/intel: Add Jasper Lake support
perf/x86/intel/uncore: Reduce the number of CBOX counters
perf/x86/intel/uncore: Update Ice Lake uncore units
perf/x86/intel/uncore: Split the Ice Lake and Tiger Lake MSR uncore support
perf/x86/intel/uncore: Support PCIe3 unit on Snow Ridge
perf/x86/intel/uncore: Generic support for the PCI sub driver
perf/x86/intel/uncore: Factor out uncore_pci_pmu_unregister()
perf/x86/intel/uncore: Factor out uncore_pci_pmu_register()
perf/x86/intel/uncore: Factor out uncore_pci_find_dev_pmu()
perf/x86/intel/uncore: Factor out uncore_pci_get_dev_die_info()
perf/amd/uncore: Inform the user how many counters each uncore PMU has
...
applied to indirect function calls. Remove a data load (indirection) by
modifying the text.
They give the flexibility of function pointers, but with better
performance. (This is especially important for cases where
retpolines would otherwise be used, as retpolines can be pretty
slow.)
API overview:
DECLARE_STATIC_CALL(name, func);
DEFINE_STATIC_CALL(name, func);
DEFINE_STATIC_CALL_NULL(name, typename);
static_call(name)(args...);
static_call_cond(name)(args...);
static_call_update(name, func);
x86 is supported via text patching, otherwise basic indirect calls are used,
with function pointers.
There's a second variant using inline code patching, inspired by jump-labels,
implemented on x86 as well.
The new APIs are utilized in the x86 perf code, a heavy user of function pointers,
where static calls speed up the PMU handler by 4.2% (!).
The generic implementation is not really excercised on other architectures,
outside of the trivial test_static_call_init() self-test.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=JvpF
-----END PGP SIGNATURE-----
Merge tag 'core-static_call-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull static call support from Ingo Molnar:
"This introduces static_call(), which is the idea of static_branch()
applied to indirect function calls. Remove a data load (indirection)
by modifying the text.
They give the flexibility of function pointers, but with better
performance. (This is especially important for cases where retpolines
would otherwise be used, as retpolines can be pretty slow.)
API overview:
DECLARE_STATIC_CALL(name, func);
DEFINE_STATIC_CALL(name, func);
DEFINE_STATIC_CALL_NULL(name, typename);
static_call(name)(args...);
static_call_cond(name)(args...);
static_call_update(name, func);
x86 is supported via text patching, otherwise basic indirect calls are
used, with function pointers.
There's a second variant using inline code patching, inspired by
jump-labels, implemented on x86 as well.
The new APIs are utilized in the x86 perf code, a heavy user of
function pointers, where static calls speed up the PMU handler by
4.2% (!).
The generic implementation is not really excercised on other
architectures, outside of the trivial test_static_call_init()
self-test"
* tag 'core-static_call-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
static_call: Fix return type of static_call_init
tracepoint: Fix out of sync data passing by static caller
tracepoint: Fix overly long tracepoint names
x86/perf, static_call: Optimize x86_pmu methods
tracepoint: Optimize using static_call()
static_call: Allow early init
static_call: Add some validation
static_call: Handle tail-calls
static_call: Add static_call_cond()
x86/alternatives: Teach text_poke_bp() to emulate RET
static_call: Add simple self-test for static calls
x86/static_call: Add inline static call implementation for x86-64
x86/static_call: Add out-of-line static call implementation
static_call: Avoid kprobes on inline static_call()s
static_call: Add inline static call infrastructure
static_call: Add basic static call infrastructure
compiler.h: Make __ADDRESSABLE() symbol truly unique
jump_label,module: Fix module lifetime for __jump_label_mod_text_reserved()
module: Properly propagate MODULE_STATE_COMING failure
module: Fix up module_notifier return values
...
because the heuristics that various linkers & compilers use to handle them
(include these bits into the output image vs discarding them silently)
are both highly idiosyncratic and also version dependent.
Instead of this historically problematic mess, this tree by Kees Cook (et al)
adds build time asserts and build time warnings if there's any orphan section
in the kernel or if a section is not sized as expected.
And because we relied on so many silent assumptions in this area, fix a metric
ton of dependencies and some outright bugs related to this, before we can
finally enable the checks on the x86, ARM and ARM64 platforms.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=fXAw
-----END PGP SIGNATURE-----
Merge tag 'core-build-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull orphan section checking from Ingo Molnar:
"Orphan link sections were a long-standing source of obscure bugs,
because the heuristics that various linkers & compilers use to handle
them (include these bits into the output image vs discarding them
silently) are both highly idiosyncratic and also version dependent.
Instead of this historically problematic mess, this tree by Kees Cook
(et al) adds build time asserts and build time warnings if there's any
orphan section in the kernel or if a section is not sized as expected.
And because we relied on so many silent assumptions in this area, fix
a metric ton of dependencies and some outright bugs related to this,
before we can finally enable the checks on the x86, ARM and ARM64
platforms"
* tag 'core-build-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
x86/boot/compressed: Warn on orphan section placement
x86/build: Warn on orphan section placement
arm/boot: Warn on orphan section placement
arm/build: Warn on orphan section placement
arm64/build: Warn on orphan section placement
x86/boot/compressed: Add missing debugging sections to output
x86/boot/compressed: Remove, discard, or assert for unwanted sections
x86/boot/compressed: Reorganize zero-size section asserts
x86/build: Add asserts for unwanted sections
x86/build: Enforce an empty .got.plt section
x86/asm: Avoid generating unused kprobe sections
arm/boot: Handle all sections explicitly
arm/build: Assert for unwanted sections
arm/build: Add missing sections
arm/build: Explicitly keep .ARM.attributes sections
arm/build: Refactor linker script headers
arm64/build: Assert for unwanted sections
arm64/build: Add missing DWARF sections
arm64/build: Use common DISCARDS in linker script
arm64/build: Remove .eh_frame* sections due to unwind tables
...
- Ensure BTF synchronization under all circumstances
- Distangle kernel and user mode #DB further
- Get ordering vs. the debug notifier correct to make KGDB work more
reliably.
- Cleanup historical gunk and make the code simpler to understand.
-----BEGIN PGP SIGNATURE-----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=nIzH
-----END PGP SIGNATURE-----
Merge tag 'x86-entry-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 entry code updates from Thomas Gleixner:
"More consolidation and correctness fixes for the debug exception:
- Ensure BTF synchronization under all circumstances
- Distangle kernel and user mode #DB further
- Get ordering vs. the debug notifier correct to make KGDB work more
reliably.
- Cleanup historical gunk and make the code simpler to understand"
* tag 'x86-entry-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/debug: Change thread.debugreg6 to thread.virtual_dr6
x86/debug: Support negative polarity DR6 bits
x86/debug: Simplify hw_breakpoint_handler()
x86/debug: Remove aout_dump_debugregs()
x86/debug: Remove the historical junk
x86/debug: Move cond_local_irq_enable() block into exc_debug_user()
x86/debug: Move historical SYSENTER junk into exc_debug_kernel()
x86/debug: Simplify #DB signal code
x86/debug: Remove handle_debug(.user) argument
x86/debug: Move kprobe_debug_handler() into exc_debug_kernel()
x86/debug: Sync BTF earlier
devices which require non-PCI based MSI handling.
- Cleanup historical leftovers all over the place
- Rework the code to utilize more core functionality
- Wrap XEN PCI/MSI interrupts into an irqdomain to make irqdomain
assignment to PCI devices possible.
- Assign irqdomains to PCI devices at initialization time which allows
to utilize the full functionality of hierarchical irqdomains.
- Remove arch_.*_msi_irq() functions from X86 and utilize the irqdomain
which is assigned to the device for interrupt management.
- Make the arch_.*_msi_irq() support conditional on a config switch and
let the last few users select it.
-----BEGIN PGP SIGNATURE-----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=JlqV
-----END PGP SIGNATURE-----
Merge tag 'x86-irq-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 irq updates from Thomas Gleixner:
"Surgery of the MSI interrupt handling to prepare the support of
upcoming devices which require non-PCI based MSI handling:
- Cleanup historical leftovers all over the place
- Rework the code to utilize more core functionality
- Wrap XEN PCI/MSI interrupts into an irqdomain to make irqdomain
assignment to PCI devices possible.
- Assign irqdomains to PCI devices at initialization time which
allows to utilize the full functionality of hierarchical
irqdomains.
- Remove arch_.*_msi_irq() functions from X86 and utilize the
irqdomain which is assigned to the device for interrupt management.
- Make the arch_.*_msi_irq() support conditional on a config switch
and let the last few users select it"
* tag 'x86-irq-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
PCI: MSI: Fix Kconfig dependencies for PCI_MSI_ARCH_FALLBACKS
x86/apic/msi: Unbreak DMAR and HPET MSI
iommu/amd: Remove domain search for PCI/MSI
iommu/vt-d: Remove domain search for PCI/MSI[X]
x86/irq: Make most MSI ops XEN private
x86/irq: Cleanup the arch_*_msi_irqs() leftovers
PCI/MSI: Make arch_.*_msi_irq[s] fallbacks selectable
x86/pci: Set default irq domain in pcibios_add_device()
iommm/amd: Store irq domain in struct device
iommm/vt-d: Store irq domain in struct device
x86/xen: Wrap XEN MSI management into irqdomain
irqdomain/msi: Allow to override msi_domain_alloc/free_irqs()
x86/xen: Consolidate XEN-MSI init
x86/xen: Rework MSI teardown
x86/xen: Make xen_msi_init() static and rename it to xen_hvm_msi_init()
PCI/MSI: Provide pci_dev_has_special_msi_domain() helper
PCI_vmd_Mark_VMD_irqdomain_with_DOMAIN_BUS_VMD_MSI
irqdomain/msi: Provide DOMAIN_BUS_VMD_MSI
x86/irq: Initialize PCI/MSI domain at PCI init time
x86/pci: Reducde #ifdeffery in PCI init code
...
James Morse.
* Add support for controlling per-thread memory bandwidth throttling
delay values on hw which supports it, by Fenghua Yu.
-----BEGIN PGP SIGNATURE-----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=u3qb
-----END PGP SIGNATURE-----
Merge tag 'x86_cache_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cache resource control updates from Borislav Petkov:
- Misc cleanups to the resctrl code in preparation for the ARM side
(James Morse)
- Add support for controlling per-thread memory bandwidth throttling
delay values on hw which supports it (Fenghua Yu)
* tag 'x86_cache_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Enable user to view thread or core throttling mode
x86/resctrl: Enumerate per-thread MBA controls
cacheinfo: Move resctrl's get_cache_id() to the cacheinfo header file
x86/resctrl: Add struct rdt_cache::arch_has_{sparse, empty}_bitmaps
x86/resctrl: Merge AMD/Intel parse_bw() calls
x86/resctrl: Add struct rdt_membw::arch_needs_linear to explain AMD/Intel MBA difference
x86/resctrl: Use is_closid_match() in more places
x86/resctrl: Include pid.h
x86/resctrl: Use container_of() in delayed_work handlers
x86/resctrl: Fix stale comment
x86/resctrl: Remove struct rdt_membw::max_delay
x86/resctrl: Remove unused struct mbm_state::chunks_bw
respective selftests.
-----BEGIN PGP SIGNATURE-----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=itDm
-----END PGP SIGNATURE-----
Merge tag 'x86_fsgsbase_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fsgsbase updates from Borislav Petkov:
"Misc minor cleanups and corrections to the fsgsbase code and
respective selftests"
* tag 'x86_fsgsbase_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/x86/fsgsbase: Test PTRACE_PEEKUSER for GSBASE with invalid LDT GS
selftests/x86/fsgsbase: Reap a forgotten child
x86/fsgsbase: Replace static_cpu_has() with boot_cpu_has()
x86/entry/64: Correct the comment over SAVE_AND_SET_GSBASE
devices which doesn't need pinning of pages for DMA anymore. Add support
for the command submission to devices using new x86 instructions like
ENQCMD{,S} and MOVDIR64B. In addition, add support for process address
space identifiers (PASIDs) which are referenced by those command
submission instructions along with the handling of the PASID state on
context switch as another extended state. Work by Fenghua Yu, Ashok Raj,
Yu-cheng Yu and Dave Jiang.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAl996DIACgkQEsHwGGHe
VUqM4A/+JDI3GxNyMyBpJR0nQ2vs23ru1o3OxvxhYtcacZ0cNwkaO7g3TLQxH+LZ
k1QtvEd4jqI6BXV4de+HdZFDcqzikJf0KHnUflLTx956/Eop5rtxzMWVo69ZmYs8
QrW0mLhyh8eq19cOHbQBb4M/HFc1DXBw+l7Ft3MeA1divOVESRB/uNxjA25K4PvV
y+pipyUxqKSNhmBFf2bV8OVZloJiEtg3H6XudP0g/rZgjYe3qWxa+2iv6D08yBNe
g7NpMDMql2uo1bcFON7se2oF34poAi49BfiIQb5G4m9pnPyvVEMOCijxCx2FHYyF
nukyxt8g3Uq+UJYoolLNoWijL1jgBWeTBg1uuwsQOqWSARJx8nr859z0GfGyk2RP
GNoYE4rrWBUMEqWk4xeiPPgRDzY0cgcGh0AeuWqNhgBfbbZeGL0t0m5kfytk5i1s
W0YfRbz+T8+iYbgVfE/Zpthc7rH7iLL7/m34JC13+pzhPVTT32ECLJov2Ac8Tt15
X+fOe6kmlDZa4GIhKRzUoR2aEyLpjufZ+ug50hznBQjGrQfcx7zFqRAU4sJx0Yyz
rxUOJNZZlyJpkyXzc12xUvShaZvTcYenHGpxXl8TU3iMbY2otxk1Xdza8pc1LGQ/
qneYgILgKa+hSBzKhXCPAAgSYtPlvQrRizArS8Y0k/9rYaKCfBU=
=K9X4
-----END PGP SIGNATURE-----
Merge tag 'x86_pasid_for_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 PASID updates from Borislav Petkov:
"Initial support for sharing virtual addresses between the CPU and
devices which doesn't need pinning of pages for DMA anymore.
Add support for the command submission to devices using new x86
instructions like ENQCMD{,S} and MOVDIR64B. In addition, add support
for process address space identifiers (PASIDs) which are referenced by
those command submission instructions along with the handling of the
PASID state on context switch as another extended state.
Work by Fenghua Yu, Ashok Raj, Yu-cheng Yu and Dave Jiang"
* tag 'x86_pasid_for_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Add an enqcmds() wrapper for the ENQCMDS instruction
x86/asm: Carve out a generic movdir64b() helper for general usage
x86/mmu: Allocate/free a PASID
x86/cpufeatures: Mark ENQCMD as disabled when configured out
mm: Add a pasid member to struct mm_struct
x86/msr-index: Define an IA32_PASID MSR
x86/fpu/xstate: Add supervisor PASID state for ENQCMD
x86/cpufeatures: Enumerate ENQCMD and ENQCMDS instructions
Documentation/x86: Add documentation for SVA (Shared Virtual Addressing)
iommu/vt-d: Change flags type to unsigned int in binding mm
drm, iommu: Change type of pasid to u32
the new UV5 class of systems, by Mike Travis.
* Use a flexible array for a dynamically sized struct uv_rtc_timer_head,
by Gustavo A. R. Silva.
-----BEGIN PGP SIGNATURE-----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=llxK
-----END PGP SIGNATURE-----
Merge tag 'x86_platform_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform updates from Borislav Petkov:
- Cleanup different aspects of the UV code and start adding support for
the new UV5 class of systems (Mike Travis)
- Use a flexible array for a dynamically sized struct uv_rtc_timer_head
(Gustavo A. R. Silva)
* tag 'x86_platform_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/platform/uv: Update Copyrights to conform to HPE standards
x86/platform/uv: Update for UV5 NMI MMR changes
x86/platform/uv: Update UV5 TSC checking
x86/platform/uv: Update node present counting
x86/platform/uv: Update UV5 MMR references in UV GRU
x86/platform/uv: Adjust GAM MMR references affected by UV5 updates
x86/platform/uv: Update MMIOH references based on new UV5 MMRs
x86/platform/uv: Add and decode Arch Type in UVsystab
x86/platform/uv: Add UV5 direct references
x86/platform/uv: Update UV MMRs for UV5
drivers/misc/sgi-xp: Adjust references in UV kernel modules
x86/platform/uv: Remove SCIR MMR references for UV systems
x86/platform/uv: Remove UV BAU TLB Shootdown Handler
x86/uv/time: Use a flexible array in struct uv_rtc_timer_head
obviates the need to flush cachelines before changing the PTE encryption
bit, by Krish Sadhukhan.
* Add Centaur initialization support for families >= 7, by Tony W
Wang-oc.
* Add a feature flag for, and expose TSX suspend load tracking feature
to KVM, by Cathy Zhang.
* Emulate SLDT and STR so that windows programs don't crash on UMIP
machines, by Brendan Shanks and Ricardo Neri.
* Use the new SERIALIZE insn on Intel hardware which supports it, by
Ricardo Neri.
* Misc cleanups and fixes.
-----BEGIN PGP SIGNATURE-----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=zXC1
-----END PGP SIGNATURE-----
Merge tag 'x86_cpu_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu updates from Borislav Petkov:
- Add support for hardware-enforced cache coherency on AMD which
obviates the need to flush cachelines before changing the PTE
encryption bit (Krish Sadhukhan)
- Add Centaur initialization support for families >= 7 (Tony W Wang-oc)
- Add a feature flag for, and expose TSX suspend load tracking feature
to KVM (Cathy Zhang)
- Emulate SLDT and STR so that windows programs don't crash on UMIP
machines (Brendan Shanks and Ricardo Neri)
- Use the new SERIALIZE insn on Intel hardware which supports it
(Ricardo Neri)
- Misc cleanups and fixes
* tag 'x86_cpu_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
KVM: SVM: Don't flush cache if hardware enforces cache coherency across encryption domains
x86/mm/pat: Don't flush cache if hardware enforces cache coherency across encryption domnains
x86/cpu: Add hardware-enforced cache coherency as a CPUID feature
x86/cpu/centaur: Add Centaur family >=7 CPUs initialization support
x86/cpu/centaur: Replace two-condition switch-case with an if statement
x86/kvm: Expose TSX Suspend Load Tracking feature
x86/cpufeatures: Enumerate TSX suspend load address tracking instructions
x86/umip: Add emulation/spoofing for SLDT and STR instructions
x86/cpu: Fix typos and improve the comments in sync_core()
x86/cpu: Use XGETBV and XSETBV mnemonics in fpu/internal.h
x86/cpu: Use SERIALIZE in sync_core() when available
encounter an MCE in kernel space but while copying from user memory by
sending them a SIGBUS on return to user space and umapping the faulty
memory, by Tony Luck and Youquan Song.
* memcpy_mcsafe() rework by splitting the functionality into
copy_mc_to_user() and copy_mc_to_kernel(). This, as a result, enables
support for new hardware which can recover from a machine check
encountered during a fast string copy and makes that the default and
lets the older hardware which does not support that advance recovery,
opt in to use the old, fragile, slow variant, by Dan Williams.
* New AMD hw enablement, by Yazen Ghannam and Akshay Gupta.
* Do not use MSR-tracing accessors in #MC context and flag any fault
while accessing MCA architectural MSRs as an architectural violation
with the hope that such hw/fw misdesigns are caught early during the hw
eval phase and they don't make it into production.
* Misc fixes, improvements and cleanups, as always.
-----BEGIN PGP SIGNATURE-----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=u1Wg
-----END PGP SIGNATURE-----
Merge tag 'ras_updates_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Borislav Petkov:
- Extend the recovery from MCE in kernel space also to processes which
encounter an MCE in kernel space but while copying from user memory
by sending them a SIGBUS on return to user space and umapping the
faulty memory, by Tony Luck and Youquan Song.
- memcpy_mcsafe() rework by splitting the functionality into
copy_mc_to_user() and copy_mc_to_kernel(). This, as a result, enables
support for new hardware which can recover from a machine check
encountered during a fast string copy and makes that the default and
lets the older hardware which does not support that advance recovery,
opt in to use the old, fragile, slow variant, by Dan Williams.
- New AMD hw enablement, by Yazen Ghannam and Akshay Gupta.
- Do not use MSR-tracing accessors in #MC context and flag any fault
while accessing MCA architectural MSRs as an architectural violation
with the hope that such hw/fw misdesigns are caught early during the
hw eval phase and they don't make it into production.
- Misc fixes, improvements and cleanups, as always.
* tag 'ras_updates_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Allow for copy_mc_fragile symbol checksum to be generated
x86/mce: Decode a kernel instruction to determine if it is copying from user
x86/mce: Recover from poison found while copying from user space
x86/mce: Avoid tail copy when machine check terminated a copy from user
x86/mce: Add _ASM_EXTABLE_CPY for copy user access
x86/mce: Provide method to find out the type of an exception handler
x86/mce: Pass pointer to saved pt_regs to severity calculation routines
x86/copy_mc: Introduce copy_mc_enhanced_fast_string()
x86, powerpc: Rename memcpy_mcsafe() to copy_mc_to_{user, kernel}()
x86/mce: Drop AMD-specific "DEFERRED" case from Intel severity rule list
x86/mce: Add Skylake quirk for patrol scrub reported errors
RAS/CEC: Convert to DEFINE_SHOW_ATTRIBUTE()
x86/mce: Annotate mce_rd/wrmsrl() with noinstr
x86/mce/dev-mcelog: Do not update kflags on AMD systems
x86/mce: Stop mce_reign() from re-computing severity for every CPU
x86/mce: Make mce_rdmsrl() panic on an inaccessible MSR
x86/mce: Increase maximum number of banks to 64
x86/mce: Delay clearing IA32_MCG_STATUS to the end of do_machine_check()
x86/MCE/AMD, EDAC/mce_amd: Remove struct smca_hwid.xec_bitmap
RAS/CEC: Fix cec_init() prototype
Add asm/mce.h to asm/asm-prototypes.h so that that asm symbol's checksum
can be generated in order to support CONFIG_MODVERSIONS with it and fix:
WARNING: modpost: EXPORT symbol "copy_mc_fragile" [vmlinux] version \
generation failed, symbol will not be versioned.
For reference see:
4efca4ed05 ("kbuild: modversions for EXPORT_SYMBOL() for asm")
334bb77387 ("x86/kbuild: enable modversions for symbols exported from asm")
Fixes: ec6347bb43 ("x86, powerpc: Rename memcpy_mcsafe() to copy_mc_to_{user, kernel}()")
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201007111447.GA23257@zn.tnic
Currently, the MOVDIR64B instruction is used to atomically submit
64-byte work descriptors to devices. Although it can encounter errors
like device queue full, command not accepted, device not ready, etc when
writing to a device MMIO, MOVDIR64B can not report back on errors from
the device itself. This means that MOVDIR64B users need to separately
interact with a device to see if a descriptor was successfully queued,
which slows down device interactions.
ENQCMD and ENQCMDS also atomically submit 64-byte work descriptors
to devices. But, they *can* report back errors directly from the
device, such as if the device was busy, or device not enabled or does
not support the command. This immediate feedback from the submission
instruction itself reduces the number of interactions with the device
and can greatly increase efficiency.
ENQCMD can be used at any privilege level, but can effectively only
submit work on behalf of the current process. ENQCMDS is a ring0-only
instruction and can explicitly specify a process context instead of
being tied to the current process or needing to reprogram the IA32_PASID
MSR.
Use ENQCMDS for work submission within the kernel because a Process
Address ID (PASID) is setup to translate the kernel virtual address
space. This PASID is provided to ENQCMDS from the descriptor structure
submitted to the device and not retrieved from IA32_PASID MSR, which is
setup for the current user address space.
See Intel Software Developer’s Manual for more information on the
instructions.
[ bp:
- Make operand constraints like movdir64b() because both insns are
basically doing the same thing, more or less.
- Fixup comments and cleanup. ]
Link: https://lkml.kernel.org/r/20200924180041.34056-3-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20201005151126.657029-3-dave.jiang@intel.com
Jens Axboe