The family information in the soc-bus data is currently
not classified properly for AM33xx devices, and a read
of /sys/bus/soc/devices/soc0/family currently shows
"Unknown". Fix the same.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
I upgraded my u-boot and noticed that wl12xx stopped working.
Turns out the kernel is not setting the quirk for the MMC2
copy clock while the eariler bootloader I had was setting it.
Signed-off-by: Tony Lindgren <tony@atomide.com>
This was incorrectly reading the irq status registers during the save
and clear, instead of the irq enable. This worked because there is only
one user for the prcm interrupts currently, namely the io-chain. Whenever
the function was called, an io-chain interrupt was both pending and
enabled.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Deasserting hardreset increases the usecount for the hwmod parent clockdomain
always, however usecount is only decreased at end in certain error cases.
This causes software supervised clockdomains to remain always on, preventing
idle. Fixed by always releasing the hwmods clockdomain parent when exiting
the function.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Carlos Hernandez <ceh@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Fixed hwmod data for pcie by having the correct module mode offset.
Previously this module mode offset was part of pcie PHY which was wrong.
Now this module mode offset was moved to pcie hwmod and removed the hwmod data
for pcie phy. While at that renamed pcie_hwmod to pciess_hwmod in order
to match with the name given in TRM.
This helps to get rid of the following warning
"omap_hwmod: pcie1: _wait_target_disable failed"
[Grygorii.Strashko@linaro.org: Found the issue that actually caused
"omap_hwmod: pcie1: _wait_target_disable failed"]
Signed-off-by: Grygorii Strashko <Grygorii.Strashko@linaro.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Add struct lock_class_key to omap_hwmod struct and use it to set unique
lockdep class per hwmod.
This will ensure that lockdep will know that each omap_hwmod->_lock should
be treated as separate class and will not give false warning about deadlock
or other issues due to nested use of hwmods.
DRA7x's ATL hwmod is one example for this since McASP can select ATL clock
as functional clock, which will trigger nested oh->_lock usage. This will
trigger false warning from lockdep validator as it is dealing with classes
and for it all hwmod clocks are the same class.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
A few fixes that came in too late to make it into the first set of pull
requests but would still be nice to have in -rc1. The majority of these
are trivial build fixes for bugs that I found myself using randconfig
testing, and a set of two patches from Uwe to mark DT strings as 'const'
where appropriate, to resolve inconsistent section attributes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=hrfV
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"A few fixes that came in too late to make it into the first set of
pull requests but would still be nice to have in -rc1.
The majority of these are trivial build fixes for bugs that I found
myself using randconfig testing, and a set of two patches from Uwe to
mark DT strings as 'const' where appropriate, to resolve inconsistent
section attributes"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: make of_device_ids const
ARM: make arrays containing machine compatible strings const
ARM: mm: Remove Kconfig symbol CACHE_PL310
ARM: rockchip: force built-in regulator support for PM
ARM: mvebu: build armada375-smp code conditionally
ARM: sti: always enable RESET_CONTROLLER
ARM: rockchip: make rockchip_suspend_init conditional
ARM: ixp4xx: fix {in,out}s{bwl} data types
ARM: prima2: do not select SMP_ON_UP
ARM: at91: fix pm declarations
ARM: davinci: multi-soc kernels require AUTO_ZRELADDR
ARM: davinci: davinci_cfg_reg cannot be init
ARM: BCM: put back ARCH_MULTI_V7 dependency for mobile
ARM: vexpress: use ARM_CPU_SUSPEND if needed
ARM: dts: add I2C device nodes for Broadcom Cygnus
ARM: dts: BCM63xx: fix L2 cache properties
enhancements and fixes mostly for ARM32, ARM64, MIPS and Power-based
devices. Additionaly the framework core underwent a bit of surgery with
two major changes. The boundary between the clock core and clock
providers (e.g clock drivers) is now more well defined with dedicated
provider helper functions. struct clk no longer maps 1:1 with the
hardware clock but is a true per-user cookie which helps us tracker
users of hardware clocks and debug bad behavior. The second major change
is the addition of rate constraints for clocks. Rate ranges are now
supported which are analogous to the voltage ranges in the regulator
framework. Unfortunately these changes to the core created some
breakeage. We think we fixed it all up but for this reason there are
lots of last minute commits trying to undo the damage.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=zCVK
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus-3.20' of git://git.linaro.org/people/mike.turquette/linux
Pull clock framework updates from Mike Turquette:
"The clock framework changes contain the usual driver additions,
enhancements and fixes mostly for ARM32, ARM64, MIPS and Power-based
devices.
Additionally the framework core underwent a bit of surgery with two
major changes:
- The boundary between the clock core and clock providers (e.g clock
drivers) is now more well defined with dedicated provider helper
functions. struct clk no longer maps 1:1 with the hardware clock
but is a true per-user cookie which helps us tracker users of
hardware clocks and debug bad behavior.
- The addition of rate constraints for clocks. Rate ranges are now
supported which are analogous to the voltage ranges in the
regulator framework.
Unfortunately these changes to the core created some breakeage. We
think we fixed it all up but for this reason there are lots of last
minute commits trying to undo the damage"
* tag 'clk-for-linus-3.20' of git://git.linaro.org/people/mike.turquette/linux: (113 commits)
clk: Only recalculate the rate if needed
Revert "clk: mxs: Fix invalid 32-bit access to frac registers"
clk: qoriq: Add support for the platform PLL
powerpc/corenet: Enable CLK_QORIQ
clk: Replace explicit clk assignment with __clk_hw_set_clk
clk: Add __clk_hw_set_clk helper function
clk: Don't dereference parent clock if is NULL
MIPS: Alchemy: Remove bogus args from alchemy_clk_fgcs_detr
clkdev: Always allocate a struct clk and call __clk_get() w/ CCF
clk: shmobile: div6: Avoid division by zero in .round_rate()
clk: mxs: Fix invalid 32-bit access to frac registers
clk: omap: compile legacy omap3 clocks conditionally
clkdev: Export clk_register_clkdev
clk: Add rate constraints to clocks
clk: remove clk-private.h
pci: xgene: do not use clk-private.h
arm: omap2+ remove dead clock code
clk: Make clk API return per-user struct clk instances
clk: tegra: Define PLLD_DSI and remove dsia(b)_mux
clk: tegra: Add support for the Tegra132 CAR IP block
...
of_device_ids (i.e. compatible strings and the respective data) are not
supposed to change at runtime. All functions working with of_device_ids
provided by <linux/of.h> work with const of_device_ids. So mark the
non-const structs in arch/arm as const, too.
While at it also add some __initconst annotations.
Acked-by: Jason Cooper <jason@lakedameon.net>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
New and updated SoC support. Also included are some cleanups where the
platform maintainers hadn't separated cleanups from new developent in
separate branches.
Some of the larger things worth pointing out:
- A large set of changes from Alexandre Belloni and Nicolas Ferre
preparing at91 platforms for multiplatform and cleaning up quite a
bit in the process.
- Removal of CSR's "Marco" SoC platform that never made it out to the
market. We love seeing these since it means the vendor published
support before product was out, which is exactly what we want!
New platforms this release are:
- Conexant Digicolor (CX92755 SoC)
- Hisilicon HiP01 SoC
- CSR/sirf Atlas7 SoC
- ST STiH418 SoC
- Common code changes for Nvidia Tegra132 (64-bit SoC)
We're seeing more and more platforms having a harder time labelling
changes as cleanups vs new development -- which is a good sign that
we've come quite far on the cleanup effort. So over time we might start
combining the cleanup and new-development branches more.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=szd9
-----END PGP SIGNATURE-----
Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform changes from Olof Johansson:
"New and updated SoC support. Also included are some cleanups where
the platform maintainers hadn't separated cleanups from new developent
in separate branches.
Some of the larger things worth pointing out:
- A large set of changes from Alexandre Belloni and Nicolas Ferre
preparing at91 platforms for multiplatform and cleaning up quite a
bit in the process.
- Removal of CSR's "Marco" SoC platform that never made it out to the
market. We love seeing these since it means the vendor published
support before product was out, which is exactly what we want!
New platforms this release are:
- Conexant Digicolor (CX92755 SoC)
- Hisilicon HiP01 SoC
- CSR/sirf Atlas7 SoC
- ST STiH418 SoC
- Common code changes for Nvidia Tegra132 (64-bit SoC)
We're seeing more and more platforms having a harder time labelling
changes as cleanups vs new development -- which is a good sign that
we've come quite far on the cleanup effort. So over time we might
start combining the cleanup and new-development branches more"
* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (124 commits)
ARM: at91/trivial: unify functions and machine names
ARM: at91: remove at91_dt_initialize and machine init_early()
ARM: at91: change board files into SoC files
ARM: at91: remove at91_boot_soc
ARM: at91: move alternative initial mapping to board-dt-sama5.c
ARM: at91: merge all SOC_AT91SAM9xxx
ARM: at91: at91rm9200: set idle and restart from rm9200_dt_device_init()
ARM: digicolor: select syscon and timer
ARM: zynq: Simplify SLCR initialization
ARM: zynq: PM: Fixed simple typo.
ARM: zynq: Setup default gpio number for Xilinx Zynq
ARM: digicolor: add low level debug support
ARM: initial support for Conexant Digicolor CX92755 SoC
ARM: OMAP2+: Add dm816x hwmod support
ARM: OMAP2+: Add clock domain support for dm816x
ARM: OMAP2+: Add board-generic.c entry for ti81xx
ARM: at91: pm: remove warning to remove SOC_AT91SAM9263 usage
ARM: at91: remove unused mach/system_rev.h
ARM: at91: stop using HAVE_AT91_DBGUx
ARM: at91: fix ordering of SRAM and PM initialization
...
This is a good healthy set of various code removals. Total net delta is 8100
lines removed.
Among the larger cleanups are:
- Removal of old Samsung S3C DMA infrastructure by Arnd
- Removal of the non-DT version of the 'lager' board by Magnus Damm
- General stale code removal on OMAP and Davinci by Rickard Strandqvist
- Removal of non-DT support on am3517 platforms by Tony Lindgren
... plus several other cleanups of various platforms across the board.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=tsjK
-----END PGP SIGNATURE-----
Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanups from Olof Johansson:
"This is a good healthy set of various code removals. Total net delta
is 8100 lines removed.
Among the larger cleanups are:
- Removal of old Samsung S3C DMA infrastructure by Arnd
- Removal of the non-DT version of the 'lager' board by Magnus Damm
- General stale code removal on OMAP and Davinci by Rickard Strandqvist
- Removal of non-DT support on am3517 platforms by Tony Lindgren
... plus several other cleanups of various platforms across the board"
* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (47 commits)
ARM: sirf: drop redundant function and marco declaration
arm: omap: specify PMUs are for ARMv7 CPUs
arm: shmobile: specify PMUs are for ARMv7 CPUs
arm: iop: specify PMUs are for XScale CPUs
arm: pxa: specify PMUs are for XScale CPUs
arm: realview: specify PMU types
ARM: SAMSUNG: remove unused DMA infrastructure
ARM: OMAP3: Add back Kconfig option MACH_OMAP3517EVM for ASoC
ARM: davinci: Remove CDCE949 driver
ARM: at91: remove useless at91rm9200_set_type()
ARM: at91: remove useless at91rm9200_dt_initialize()
ARM: at91: move debug-macro.S into the common space
ARM: at91: remove useless at91_sysirq_mask_rtx
ARM: at91: remove useless config MACH_AT91SAM9_DT
ARM: at91: remove useless config MACH_AT91RM9200_DT
ARM: at91: remove unused mach/memory.h
ARM: at91: remove useless header file includes
ARM: at91: remove unneeded header file
rtc: at91/Kconfig: remove useless options
ARM: at91/Documentation: add a README for Atmel SoCs
...
Here's a small collection of fixes accrued during the last release that weren't
considered severe enough to merge during the -rc series.
A few of these are around resurrecting TI81xx support that's been broken for
quite a while, the rest are smaller fixes -- most for PXA but a few across
the board.
There are also some updates to MAINTAINERS here, in particular for Broadcom
platforms.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=YCX1
-----END PGP SIGNATURE-----
Merge tag 'fixes-non-critical-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC non-critical fixes from Olof Johansson:
"Here's a small collection of fixes accrued during the last release
that weren't considered severe enough to merge during the -rc series.
A few of these are around resurrecting TI81xx support that's been
broken for quite a while, the rest are smaller fixes -- most for PXA
but a few across the board.
There are also some updates to MAINTAINERS here, in particular for
Broadcom platforms"
* tag 'fixes-non-critical-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (23 commits)
MAINTAINERS: fix git repositories for Broadcom SoCs
ARM: pxa: fix broken isa interrupts for zeus and viper
ARM: DRA7: hwmod: Fix boot crash with DEBUG_LL enabled on UART3
ARM: OMAP: DRA7: hwmod: Make gpmc software supervised as the smart idle is broken
ARM: AM43xx: hwmod: set DSS submodule parent hwmods
ARM: OMAP2+: hwmod: print error if wait_target_ready() failed
MAINTAINERS: add maintainer for OMAP hwmod data
ARM: OMAP2+: Disable omap3 PM init for ti81xx
ARM: OMAP2+: Fix reboot for 81xx
ARM: OMAP2+: Fix dm814 and dm816 for clocks and timer init
ARM: OMAP2+: Fix ti81xx class type
ARM: OMAP2+: Fix ti81xx devtype
ARM: OMAP2+: Fix error handling for omap2_clk_enable_init_clocks
MAINTAINERS: add a git entry for BMIPS-based BCM7xxx SoCs
MAINTAINERS: add a git entry for BCM7xxx ARM-based SoCs
MAINTAINERS: update Broadcom Cygnus SoC git tree
MAINTAINERS: move BCM63xx ARM-based SoCs git tree
hx4700: regulator: declare full constraints
ARM: pxa: add regulator_has_full_constraints to spitz board file
ARM: pxa: add regulator_has_full_constraints to poodle board file
...
Pull ARM updates from Russell King:
- clang assembly fixes from Ard
- optimisations and cleanups for Aurora L2 cache support
- efficient L2 cache support for secure monitor API on Exynos SoCs
- debug menu cleanup from Daniel Thompson to allow better behaviour for
multiplatform kernels
- StrongARM SA11x0 conversion to irq domains, and pxa_timer
- kprobes updates for older ARM CPUs
- move probes support out of arch/arm/kernel to arch/arm/probes
- add inline asm support for the rbit (reverse bits) instruction
- provide an ARM mode secondary CPU entry point (for Qualcomm CPUs)
- remove the unused ARMv3 user access code
- add driver_override support to AMBA Primecell bus
* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (55 commits)
ARM: 8256/1: driver coamba: add device binding path 'driver_override'
ARM: 8301/1: qcom: Use secondary_startup_arm()
ARM: 8302/1: Add a secondary_startup that assumes ARM mode
ARM: 8300/1: teach __asmeq that r11 == fp and r12 == ip
ARM: kprobes: Fix compilation error caused by superfluous '*'
ARM: 8297/1: cache-l2x0: optimize aurora range operations
ARM: 8296/1: cache-l2x0: clean up aurora cache handling
ARM: 8284/1: sa1100: clear RCSR_SMR on resume
ARM: 8283/1: sa1100: collie: clear PWER register on machine init
ARM: 8282/1: sa1100: use handle_domain_irq
ARM: 8281/1: sa1100: move GPIO-related IRQ code to gpio driver
ARM: 8280/1: sa1100: switch to irq_domain_add_simple()
ARM: 8279/1: sa1100: merge both GPIO irqdomains
ARM: 8278/1: sa1100: split irq handling for low GPIOs
ARM: 8291/1: replace magic number with PAGE_SHIFT macro in fixup_pv code
ARM: 8290/1: decompressor: fix a wrong comment
ARM: 8286/1: mm: Fix dma_contiguous_reserve comment
ARM: 8248/1: pm: remove outdated comment
ARM: 8274/1: Fix DEBUG_LL for multi-platform kernels (without PL01X)
ARM: 8273/1: Seperate DEBUG_UART_PHYS from DEBUG_LL on EP93XX
...
- Support for MMC power sequences.
- SDIO function devicetree subnode parsing.
- Refactor the hardware reset routines and enable it for SD cards.
- Various code quality improvements, especially for slot-gpio.
MMC host:
- dw_mmc: Various fixes and cleanups.
- dw_mmc: Convert to mmc_send_tuning().
- moxart: Fix probe logic.
- sdhci: Various fixes and cleanups
- sdhci: Asynchronous request handling support.
- sdhci-pxav3: Various fixes and cleanups.
- sdhci-tegra: Fixes for T114, T124 and T132.
- rtsx: Various fixes and cleanups.
- rtsx: Support for SDIO.
- sdhi/tmio: Refactor and cleanup of header files.
- omap_hsmmc: Use slot-gpio and common MMC DT parser.
- Make all hosts to deal with errors from mmc_of_parse().
- sunxi: Various fixes and cleanups.
- sdhci: Support for Fujitsu SDHCI controller f_sdh30.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ojsj
-----END PGP SIGNATURE-----
Merge tag 'mmc-v3.20-1' of git://git.linaro.org/people/ulf.hansson/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Support for MMC power sequences.
- SDIO function devicetree subnode parsing.
- Refactor the hardware reset routines and enable it for SD cards.
- Various code quality improvements, especially for slot-gpio.
MMC host:
- dw_mmc: Various fixes and cleanups.
- dw_mmc: Convert to mmc_send_tuning().
- moxart: Fix probe logic.
- sdhci: Various fixes and cleanups
- sdhci: Asynchronous request handling support.
- sdhci-pxav3: Various fixes and cleanups.
- sdhci-tegra: Fixes for T114, T124 and T132.
- rtsx: Various fixes and cleanups.
- rtsx: Support for SDIO.
- sdhi/tmio: Refactor and cleanup of header files.
- omap_hsmmc: Use slot-gpio and common MMC DT parser.
- Make all hosts to deal with errors from mmc_of_parse().
- sunxi: Various fixes and cleanups.
- sdhci: Support for Fujitsu SDHCI controller f_sdh30"
* tag 'mmc-v3.20-1' of git://git.linaro.org/people/ulf.hansson/mmc: (117 commits)
mmc: sdhci-s3c: solve problem with sleeping in atomic context
mmc: pwrseq: add driver for emmc hardware reset
mmc: moxart: fix probe logic
mmc: core: Invoke mmc_pwrseq_post_power_on() prior MMC_POWER_ON state
mmc: pwrseq_simple: Add optional reference clock support
mmc: pwrseq: Document optional clock for the simple power sequence
mmc: pwrseq_simple: Extend to support more pins
mmc: pwrseq: Document that simple sequence support more than one GPIO
mmc: Add hardware dependencies for sdhci-pxav3 and sdhci-pxav2
mmc: sdhci-pxav3: Modify clock settings for the SDR50 and DDR50 modes
mmc: sdhci-pxav3: Extend binding with SDIO3 conf reg for the Armada 38x
mmc: sdhci-pxav3: Fix Armada 38x controller's caps according to erratum ERR-7878951
mmc: sdhci-pxav3: Fix SDR50 and DDR50 capabilities for the Armada 38x flavor
mmc: sdhci: switch voltage before sdhci_set_ios in runtime resume
mmc: tegra: Write xfer_mode, CMD regs in together
mmc: Resolve BKOPS compatability issue
mmc: sdhci-pxav3: fix setting of pdata->clk_delay_cycles
mmc: dw_mmc: rockchip: remove incorrect __exit_p()
mmc: dw_mmc: exynos: remove incorrect __exit_p()
mmc: Fix menuconfig alignment of MMC_SDHCI_* options
...
Now that we can specify which PMU variant we're likely to deal with, do
so in the omap board code. This will allow us to split the ARMv6, ARMv7,
and XScale PMU drivers.
The unnecessary include of asm/pmu.h is also removed.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Olof Johansson <olof@lixom.net>
Signed-off-by: Olof Johansson <olof@lixom.net>
Adds a way for clock consumers to set maximum and minimum rates. This
can be used for thermal drivers to set minimum rates, or by misc.
drivers to set maximum rates to assure a minimum performance level.
Changes the signature of the determine_rate callback by adding the
parameters min_rate and max_rate.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
[sboyd@codeaurora.org: set req_rate in __clk_init]
Signed-off-by: Michael Turquette <mturquette@linaro.org>
[mturquette@linaro.org: min/max rate for sun6i_ahb1_clk_determine_rate
migrated clk-private.h changes to clk.c]
Remove omap_clocks_register and dummy_ck. The former is not used anymore
now that the statically defined clk stuctures are replaced with proper
descriptors and registered with the framework.
The dummy clock in arch/arm/mach-omap2 is made redundant by the OMAP3+
clock data that migrated to drivers/clk.
An additional benefit to this clean-up is removing the references to
clk-private.h which will be removed.
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tero Kristo <t-kristo@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
Moves clock state to struct clk_core, but takes care to change as little API as
possible.
struct clk_hw still has a pointer to a struct clk, which is the
implementation's per-user clk instance, for backwards compatibility.
The struct clk that clk_get_parent() returns isn't owned by the caller, but by
the clock implementation, so the former shouldn't call clk_put() on it.
Because some boards in mach-omap2 still register clocks statically, their clock
registration had to be updated to take into account that the clock information
is stored in struct clk_core now.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
[mturquette@linaro.org: adapted clk_has_parent to struct clk_core
applied OMAP3+ DPLL fix from Tero & Tony]
This is no longer used for anything, thus it can be removed.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
As the clock data is now available for the legacy boot also from the
clock driver, use this rather than the data under the mach folder.
This allows us to get rid of the old clock data completely.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
As the legacy clock data is being moved under clock driver, the
clock data will be using the same low level infrastructure for
register accesses. This requires the clk_memmaps to be initialized
properly. This patch adds a support hook to the PRM driver to
initialize the mappings.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
Add minimal hwmod support that works at least on dm8168. This
is based on the code in the earlier TI CDP tree, and an earlier
patch by Aida Mynzhasova <aida.mynzhasova@skitlab.ru>.
I've set up things to work pretty much the same way as for
am33xx. We are basically using cm33xx.c with a different set
of clocks and clockdomains.
This code is based on the TI81XX-LINUX-PSP-04.04.00.02 patches
published at:
http://downloads.ti.com/dsps/dsps_public_sw/psp/LinuxPSP/TI81XX_04_04/04_04_00_02/index_FDS.html
Cc: Aida Mynzhasova <aida.mynzhasova@skitlab.ru>
Cc: Brian Hutchinson <b.hutchman@gmail.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This patch adds required definitions and structures for clockdomain
initialization, so omap3xxx_clockdomains_init() was substituted by
new ti81xx_clockdomains_init() while early initialization of
TI81XX platform.
Note that we now need to have 81xx in a separate CONFIG_SOC_TI81XX
block instead inside the ifdef block for omap3 to avoid make
randconfig build errors.
This code is based on the TI81XX-LINUX-PSP-04.04.00.02 patches
published at:
http://downloads.ti.com/dsps/dsps_public_sw/psp/LinuxPSP/TI81XX_04_04/04_04_00_02/index_FDS.html
Cc: Brian Hutchinson <b.hutchman@gmail.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Aida Mynzhasova <aida.mynzhasova@skitlab.ru>
[tony@atomide.com: updated to apply, renamed to clockdomains81xx.c,
fixed to use am33xx_clkdm_operations, various fixes suggested by
Paul Walmsley]
Reviewed-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This allows booting ti81xx boards when a .dts file
is in place.
Cc: Brian Hutchinson <b.hutchman@gmail.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
time now and we have at least a minimal dts file for the 3517
based boards. Also almost all the drivers are usable in device
tree mode. And if there are any drivers not yet supported in device
tree mode, those can be enabled using pdata quirks.
This leaves omap3430 to omap3730 as the only remaining mach-omap2
platforms still booting in legacy mode also. For those were are
printing a warning during the boot to get people to update their
systems to boot in device tree mode and slowly converting them
over to device tree based booting.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=unh4
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.20/drop-legacy-3517-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup
Merge "drop legacy booting for omap3517" from Tony Lindgren:
We have had omap3517 booting in device tree mode for quite some
time now and we have at least a minimal dts file for the 3517
based boards. Also almost all the drivers are usable in device
tree mode. And if there are any drivers not yet supported in device
tree mode, those can be enabled using pdata quirks.
This leaves omap3430 to omap3730 as the only remaining mach-omap2
platforms still booting in legacy mode also. For those were are
printing a warning during the boot to get people to update their
systems to boot in device tree mode and slowly converting them
over to device tree based booting.
* tag 'omap-for-v3.20/drop-legacy-3517-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP3: Add back Kconfig option MACH_OMAP3517EVM for ASoC
ARM: OMAP3: Remove legacy support for am35xx-emac
ARM: OMAP3: Remove cm-t3517 legacy support
ARM: OMAP3: Remove legacy support for am3517crane
ARM: OMAP3: Remove legacy support for am3517-evm
Signed-off-by: Olof Johansson <olof@lixom.net>
First set of OMAP2+ hwmod patches for Linux v3.20. These are mostly
fixes for warnings, although there's one DRA7xx patch that fixes
CONFIG_DEBUG_LL for AM572x/DRA7xx SoCs that use UART3 for console,
such as the BeagleBoard-X15.
These patches entered Linux-next starting with the next-20150121 tag.
Basic build, boot, and PM test results can be found here:
http://www.pwsan.com/omap/testlogs/omap-hwmod-a-for-v3.20/20150121142621/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Hn9I
-----END PGP SIGNATURE-----
Merge tag 'for-v3.20/omap-hwmod-a' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.20/fixes-not-urgent
ARM: OMAP2+: hwmod: first set of patches for v3.20
First set of OMAP2+ hwmod patches for Linux v3.20. These are mostly
fixes for warnings, although there's one DRA7xx patch that fixes
CONFIG_DEBUG_LL for AM572x/DRA7xx SoCs that use UART3 for console,
such as the BeagleBoard-X15.
These patches entered Linux-next starting with the next-20150121 tag.
Basic build, boot, and PM test results can be found here:
http://www.pwsan.com/omap/testlogs/omap-hwmod-a-for-v3.20/20150121142621/
With commit '7dedd34: ARM: OMAP2+: hwmod: Fix a crash in _setup_reset()
with DEBUG_LL' we moved from parsing cmdline to identify uart used
for earlycon to using the requsite hwmod CONFIG_DEBUG_OMAPxUARTy FLAGS.
On DRA7 UART3 hwmod doesn't have this flag enabled, and atleast on
BeagleBoard-X15, where we use UART3 for console, boot fails with
DEBUG_LL enabled. Enable DEBUG_OMAP4UART3_FLAGS for UART3 hwmod.
For using DEBUG_LL, enable CONFIG_DEBUG_OMAP4UART3 in menuconfig.
Fixes: 90020c7b2c ("ARM: OMAP: DRA7: hwmod: Create initial DRA7XX SoC data")
Cc: <stable@vger.kernel.org> # v3.12+
Reviewed-by: Felipe Balbi <balbi@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
This patch fixes: 'omap_hwmod: gpmc: _wait_target_disable failed'
error during suspend.
This is because smart idle is broken.
Tested in dra7-evm D1 board.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Set DSS core hwmod as the parent for all the DSS submodules. This fixes
the boot time DSS reset, removing the following warnings:
omap_hwmod: dss_dispc: cannot be enabled for reset (3)
omap_hwmod: dss_rfbi: cannot be enabled for reset (3)
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Fixed pr_debug to pr_err when hwmod returns an error when enabling
a module.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
We still have SND_OMAP_SOC_AM3517EVM depending on MACH_OMAP3517EVM,
so let's keep MACH_OMAP3517EVM Kconfig option around for a little
bit longer.
This removes the dependency between ARM SoC changes and the ASoC
changes, and allows the following three options for the driver:
1. Update the driver for device tree based booting
2. Initialize the driver with legacy platform data, then update
the driver for device tree based booting
3. Just remove the driver if there are no audio users for
3517-evm board
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
In preparation for having init_card() called for all card types (not
just SDIO), change pandora_wl1251_init_card() so it checks whether the
card type is SDIO.
Signed-off-by: Doug Anderson <dianders@chromium.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Commit 9a1091ef00 ("irqchip: gic: Support hierarchy irq domain")
changed the GIC driver to use a non-legacy IRQ domain on DT
platforms. This patch assumes that DT-driven systems are getting
all of their interrupts from device tree.
Turns out that OMAP has quite a few hidden gems, and still uses
hardcoded interrupts despite having fairly complete DTs.
This patch attempts to work around these by offering a translation
method that can be called directly from the hwmod code, if present.
The same hack is sprinkled over PRCM and TWL.
It isn't pretty, but it seems to do the job without having to add
more hacks to the interrupt controller code.
Tested on OMAP4 (Panda-ES) and OMAP5 (UEVM5432).
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Nishanth Menon <nm@ti.com>
[tony@atomide.com: updated to fix make randconfig issue]
Signed-off-by: Tony Lindgren <tony@atomide.com>
This patch implements generic DT L2C initialisation (the one from
init_IRQ in arch/arm/kernel/irq.c) for Omap4 and AM43 platforms and
kills the SoC specific stuff in arch/arm/mach-omap2/omap4-common.c.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
We are missing proper hooks for 81xx for reboot to work.
Cc: Brian Hutchinson <b.hutchman@gmail.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Fix dm814 and dm816 clocks and timer init.
Cc: Brian Hutchinson <b.hutchman@gmail.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Otherwise it will return true for cpu_is_omap34xx() which we don't
want for the clocks and hwmod. It's closer to am33xx for the clocks
and hwmod than to the omap34xx. We also want to be able to detect
814x and 816x separately as at least the clocks are different with
814x using a apll and 816x using a fapll for the source clocks.
Note that we can also remove omap3xxx_clk_init() call as it's wrong
and ti81xx are booting in device tree only mode.
Cc: Brian Hutchinson <b.hutchman@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Otherwise we get error "Cannot detect omap type!" and many
things can fail with following:
Unhandled fault: imprecise external abort (0xc06) at 0xc6031fb0
This is because the omap_type is being used to set up th SoC
specific functions for omaps.
Cc: Brian Hutchinson <b.hutchman@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We need to check if we got the clock before trying to do anything
with it. Otherwise we will get something like this:
Unable to handle kernel paging request at virtual address fffffffe
...
[<c04bef78>] (clk_prepare) from [<c00338a4>] (omap2_clk_enable_init_clocks+0x50/0x8)
[<c00338a4>] (omap2_clk_enable_init_clocks) from [<c0876838>] (dm816x_dt_clk_init+0)
...
Let's add check for the clock and WARN if the init clock was not
found.
Cc: Brian Hutchinson <b.hutchman@gmail.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tero Kristo <t-kristo@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The support for 81xx was never working in mainline, and the broken
legacy booting support has been removed. There are patches coming
to make 81xx boot with device tree, and for that we won't need any
of this legacy platform code, so let's just remove it.
Cc: Brian Hutchinson <b.hutchman@gmail.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This board is working with device tree based booting so there should
not be any need to keep the legacy booting support around. People
using this board can boot it with appended DTB with existing bootloader.
By removing the 3517 legacy booting support we can get a bit closer to
making all of omap3 boot in device tree only mode.
Cc: Dmitry Lifshitz <lifshitz@compulab.co.il>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This board is working with device tree based booting so there should
not be any need to keep the legacy booting support around. People
using this board can boot it with appended DTB with existing bootloader.
By removing the 3517 legacy booting support we can get a bit closer to
making all of omap3 boot in device tree only mode.
Signed-off-by: Tony Lindgren <tony@atomide.com>
This board is working with device tree based booting so there should
not be any need to keep the legacy booting support around. People
using this board can boot it with appended DTB with existing bootloader.
By removing the 3517 legacy booting support we can get a bit closer to
making all of omap3 boot in device tree only mode.
Signed-off-by: Tony Lindgren <tony@atomide.com>
There is no implementation for this anywhere, so remove it from the header
files also.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
[tony@atomide.com: updated to apply]
Signed-off-by: Tony Lindgren <tony@atomide.com>
omap2xxx_cm_get_pll_config and omap2xxx_cm_get_pll_status are not used
for anything, so remove these.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
APLL clock type is no longer needed as the legacy clock support is removed.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
[tony@atomide.com: updated to apply]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Suman Anna