DIR_INDEX has been introduced as a compat ext4 feature. That means that
even kernels / tools that don't understand the feature may modify the
filesystem. This works because for kernels not understanding indexed dir
format, internal htree nodes appear just as empty directory entries.
Index dir aware kernels then check the htree structure is still
consistent before using the data. This all worked reasonably well until
metadata checksums were introduced. The problem is that these
effectively made DIR_INDEX only ro-compatible because internal htree
nodes store checksums in a different place than normal directory blocks.
Thus any modification ignorant to DIR_INDEX (or just clearing
EXT4_INDEX_FL from the inode) will effectively cause checksum mismatch
and trigger kernel errors. So we have to be more careful when dealing
with indexed directories on filesystems with checksumming enabled.
1) We just disallow loading any directory inodes with EXT4_INDEX_FL when
DIR_INDEX is not enabled. This is harsh but it should be very rare (it
means someone disabled DIR_INDEX on existing filesystem and didn't run
e2fsck), e2fsck can fix the problem, and we don't want to answer the
difficult question: "Should we rather corrupt the directory more or
should we ignore that DIR_INDEX feature is not set?"
2) When we find out htree structure is corrupted (but the filesystem and
the directory should in support htrees), we continue just ignoring htree
information for reading but we refuse to add new entries to the
directory to avoid corrupting it more.
Link: https://lore.kernel.org/r/20200210144316.22081-1-jack@suse.cz
Fixes: dbe8944404 ("ext4: Calculate and verify checksums for htree nodes")
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
A recent commit, 9803387c55 ("ext4: validate the
debug_want_extra_isize mount option at parse time"), moved mount-time
checks around. One of those changes moved the inode size check before
the blocksize variable was set to the blocksize of the file system.
After 9803387c55 was set to the minimum allowable blocksize, which
in practice on most systems would be 1024 bytes. This cuased file
systems with inode sizes larger than 1024 bytes to be rejected with a
message:
EXT4-fs (sdXX): unsupported inode size: 4096
Fixes: 9803387c55 ("ext4: validate the debug_want_extra_isize mount option at parse time")
Link: https://lore.kernel.org/r/20200206225252.GA3673@mit.edu
Reported-by: Herbert Poetzl <herbert@13thfloor.at>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
This patch enables the selftests for the s390 specific protected key
AES (PAES) cipher implementations:
* cbc-paes-s390
* ctr-paes-s390
* ecb-paes-s390
* xts-paes-s390
PAES is an AES cipher but with encrypted ('protected') key
material. However, the paes ciphers are able to derive an protected
key from clear key material with the help of the pkey kernel module.
So this patch now enables the generic AES tests for the paes
ciphers. Under the hood the setkey() functions rearrange the clear key
values as clear key token and so the pkey kernel module is able to
provide protected key blobs from the given clear key values. The
derived protected key blobs are then used within the paes cipers and
should produce the very same results as the generic AES implementation
with the clear key values.
The s390-paes cipher testlist entries are surrounded
by #if IS_ENABLED(CONFIG_CRYPTO_PAES_S390) because they don't
make any sense on non s390 platforms or without the PAES
cipher implementation.
Link: http://lkml.kernel.org/r/20200213083946.zicarnnt3wizl5ty@gondor.apana.org.au
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Coverity reports that conditions checking quota limits in ext4_statfs()
contain dead code. Indeed it is right and current conditions can be
simplified.
Link: https://lore.kernel.org/r/20200130111148.10766-1-jack@suse.cz
Reported-by: Coverity <scan-admin@coverity.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Macro nr_to_fifo_front() is only used once in btree_flush_write(),
it is unncessary indeed. This patch removes this macro and does
calculation directly in place.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 1df3877ff6.
In my testing, sometimes even all the cached btree nodes are freed,
creating gc and allocator kernel threads may still fail. Finally it
turns out that kthread_run() may fail if there is pending signal for
current task. And the pending signal is sent from OOM killer which
is triggered by memory consuption in bch_btree_check().
Therefore explicitly shrinking bcache btree node here does not help,
and after the shrinker callback is improved, as well as pending signals
are ignored before creating kernel threads, now such operation is
unncessary anymore.
This patch reverts the commit 1df3877ff6 ("bcache: shrink btree node
cache after bch_btree_check()") because we have better improvement now.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When run a cache set, all the bcache btree node of this cache set will
be checked by bch_btree_check(). If the bcache btree is very large,
iterating all the btree nodes will occupy too much system memory and
the bcache registering process might be selected and killed by system
OOM killer. kthread_run() will fail if current process has pending
signal, therefore the kthread creating in run_cache_set() for gc and
allocator kernel threads are very probably failed for a very large
bcache btree.
Indeed such OOM is safe and the registering process will exit after
the registration done. Therefore this patch flushes pending signals
during the cache set start up, specificly in bch_cache_allocator_start()
and bch_gc_thread_start(), to make sure run_cache_set() won't fail for
large cahced data set.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The commit 66f2d19f81 ("ALSA: pcm: Fix memory leak at closing a
stream without hw_free") tried to fix the regression wrt the missing
hw_free call at closing without SNDRV_PCM_IOCTL_HW_FREE ioctl.
However, the code change dropped mistakenly the state check, resulting
in calling hw_free twice when SNDRV_PCM_IOCTL_HW_FRE got called
beforehand. For most drivers, this is almost harmless, but the
drivers like SOF show another regression now.
This patch adds the state condition check before calling do_hw_free()
at releasing the stream for avoiding the double hw_free calls.
Fixes: 66f2d19f81 ("ALSA: pcm: Fix memory leak at closing a stream without hw_free")
Reported-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/s5hd0ajyprg.wl-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When run stress tests with RXE, the following Call Traces often occur
watchdog: BUG: soft lockup - CPU#2 stuck for 22s! [swapper/2:0]
...
Call Trace:
<IRQ>
create_object+0x3f/0x3b0
kmem_cache_alloc_node_trace+0x129/0x2d0
__kmalloc_reserve.isra.52+0x2e/0x80
__alloc_skb+0x83/0x270
rxe_init_packet+0x99/0x150 [rdma_rxe]
rxe_requester+0x34e/0x11a0 [rdma_rxe]
rxe_do_task+0x85/0xf0 [rdma_rxe]
tasklet_action_common.isra.21+0xeb/0x100
__do_softirq+0xd0/0x298
irq_exit+0xc5/0xd0
smp_apic_timer_interrupt+0x68/0x120
apic_timer_interrupt+0xf/0x20
</IRQ>
...
The root cause is that tasklet is actually a softirq. In a tasklet
handler, another softirq handler is triggered. Usually these softirq
handlers run on the same cpu core. So this will cause "soft lockup Bug".
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20200212072635.682689-8-leon@kernel.org
Signed-off-by: Zhu Yanjun <yanjunz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The cmd and index variables declared as u16 and the result is supposed to
be stored in u64. The C arithmetic rules doesn't promote "(index >> 8) <<
16" to be u64 and leaves the end result to be u16.
Fixes: 7be76bef32 ("IB/mlx5: Introduce VAR object and its alloc/destroy methods")
Link: https://lore.kernel.org/r/20200212072635.682689-10-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When disassociating a device from umad we must ensure that the sysfs
access is prevented before blocking the fops, otherwise assumptions in
syfs don't hold:
CPU0 CPU1
ib_umad_kill_port() ibdev_show()
port->ib_dev = NULL
dev_name(port->ib_dev)
The prior patch made an error in moving the device_destroy(), it should
have been split into device_del() (above) and put_device() (below). At
this point we already have the split, so move the device_del() back to its
original place.
kernel stack
PF: error_code(0x0000) - not-present page
Oops: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
RIP: 0010:ibdev_show+0x18/0x50 [ib_umad]
RSP: 0018:ffffc9000097fe40 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffffffffa0441120 RCX: ffff8881df514000
RDX: ffff8881df514000 RSI: ffffffffa0441120 RDI: ffff8881df1e8870
RBP: ffffffff81caf000 R08: ffff8881df1e8870 R09: 0000000000000000
R10: 0000000000001000 R11: 0000000000000003 R12: ffff88822f550b40
R13: 0000000000000001 R14: ffffc9000097ff08 R15: ffff8882238bad58
FS: 00007f1437ff3740(0000) GS:ffff888236940000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000004e8 CR3: 00000001e0dfc001 CR4: 00000000001606e0
Call Trace:
dev_attr_show+0x15/0x50
sysfs_kf_seq_show+0xb8/0x1a0
seq_read+0x12d/0x350
vfs_read+0x89/0x140
ksys_read+0x55/0xd0
do_syscall_64+0x55/0x1b0
entry_SYSCALL_64_after_hwframe+0x44/0xa9:
Fixes: cf7ad30302 ("IB/umad: Avoid destroying device while it is accessed")
Link: https://lore.kernel.org/r/20200212072635.682689-9-leon@kernel.org
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
As in the prior patch, the devx code is not fully cleaning up its
event_lists before finishing driver_destroy allowing a later read to
trigger user after free conditions.
Re-arrange things so that the event_list is always empty after destroy and
ensure it remains empty until the file is closed.
Fixes: f7c8416cce ("RDMA/core: Simplify destruction of FD uobjects")
Link: https://lore.kernel.org/r/20200212072635.682689-7-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When the uobject file scheme was revised to allow device disassociation
from the file it became possible for read() to still happen the driver
destroys the uobject.
The old clode code was not tolerant to concurrent read, and when it was
moved to the driver destroy it creates a bug.
Ensure the event_list is empty after driver destroy by adding the missing
list_del(). Otherwise read() can trigger a use after free and double
kfree.
Fixes: f7c8416cce ("RDMA/core: Simplify destruction of FD uobjects")
Link: https://lore.kernel.org/r/20200212072635.682689-6-leon@kernel.org
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
All created csrow objects must be removed in the error path of
edac_create_csrow_objects(). The objects have been added as devices.
They need to be removed by doing a device_del() *and* put_device() call
to also free their memory. The missing put_device() leaves a memory
leak. Use device_unregister() instead of device_del() which properly
unregisters the device doing both.
Fixes: 7adc05d2dc ("EDAC/sysfs: Drop device references properly")
Signed-off-by: Robert Richter <rrichter@marvell.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: John Garry <john.garry@huawei.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200212120340.4764-4-rrichter@marvell.com
A test kernel with the options DEBUG_TEST_DRIVER_REMOVE, KASAN and
DEBUG_KMEMLEAK set, revealed several issues when removing an mci device:
1) Use-after-free:
On 27.11.19 17:07:33, John Garry wrote:
> [ 22.104498] BUG: KASAN: use-after-free in
> edac_remove_sysfs_mci_device+0x148/0x180
The use-after-free is caused by the mci_for_each_dimm() macro called in
edac_remove_sysfs_mci_device(). The iterator was introduced with
c498afaf7d ("EDAC: Introduce an mci_for_each_dimm() iterator").
The iterator loop calls device_unregister(&dimm->dev), which removes
the sysfs entry of the device, but also frees the dimm struct in
dimm_attr_release(). When incrementing the loop in mci_for_each_dimm(),
the dimm struct is accessed again, after having been freed already.
The fix is to free all the mci device's subsequent dimm and csrow
objects at a later point, in _edac_mc_free(), when the mci device itself
is being freed.
This keeps the data structures intact and the mci device can be
fully used until its removal. The change allows the safe usage of
mci_for_each_dimm() to release dimm devices from sysfs.
2) Memory leaks:
Following memory leaks have been detected:
# grep edac /sys/kernel/debug/kmemleak | sort | uniq -c
1 [<000000003c0f58f9>] edac_mc_alloc+0x3bc/0x9d0 # mci->csrows
16 [<00000000bb932dc0>] edac_mc_alloc+0x49c/0x9d0 # csr->channels
16 [<00000000e2734dba>] edac_mc_alloc+0x518/0x9d0 # csr->channels[chn]
1 [<00000000eb040168>] edac_mc_alloc+0x5c8/0x9d0 # mci->dimms
34 [<00000000ef737c29>] ghes_edac_register+0x1c8/0x3f8 # see edac_mc_alloc()
All leaks are from memory allocated by edac_mc_alloc().
Note: The test above shows that edac_mc_alloc() was called here from
ghes_edac_register(), thus both functions show up in the stack trace
but the module causing the leaks is edac_mc. The comments with the data
structures involved were made manually by analyzing the objdump.
The data structures listed above and created by edac_mc_alloc() are
not properly removed during device removal, which is done in
edac_mc_free().
There are two paths implemented to remove the device depending on device
registration, _edac_mc_free() is called if the device is not registered
and edac_unregister_sysfs() otherwise.
The implemenations differ. For the sysfs case, the mci device removal
lacks the removal of subsequent data structures (csrows, channels,
dimms). This causes the memory leaks (see mci_attr_release()).
[ bp: Massage commit message. ]
Fixes: c498afaf7d ("EDAC: Introduce an mci_for_each_dimm() iterator")
Fixes: faa2ad09c0 ("edac_mc: edac_mc_free() cannot assume mem_ctl_info is registered in sysfs.")
Fixes: 7a623c0390 ("edac: rewrite the sysfs code to use struct device")
Reported-by: John Garry <john.garry@huawei.com>
Signed-off-by: Robert Richter <rrichter@marvell.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: John Garry <john.garry@huawei.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200212120340.4764-3-rrichter@marvell.com
It should be safe to ignore clock validity check result if the following
conditions are met:
- only one single sample rate is supported;
- the terminal is directly connected to the clock source;
- the clock type is internal.
This is to deal with some Denon DJ controllers that always reports that
clock is invalid.
Tested-by: Tobias Oszlanyi <toszlanyi@yahoo.de>
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200212235450.697348-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A number of the debug statements output file or directory mode
in hex. Change these to print using octal.
Signed-off-by: Frank Sorenson <sorenson@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Make sure that the driver compatible strings matches the binding by
removing the space between the manufacturer and model.
Fixes: aaafb7c8eb ("hwmon: (pmbus) Add support for Infineon Multi-phase xdpe122 family controllers")
Cc: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20200212092426.24012-1-johan@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Fix kernel-doc warnings in struct pipe_inode_info after @wait was
split into @rd_wait and @wr_wait.
include/linux/pipe_fs_i.h:66: warning: Function parameter or member 'rd_wait' not described in 'pipe_inode_info'
include/linux/pipe_fs_i.h:66: warning: Function parameter or member 'wr_wait' not described in 'pipe_inode_info'
Fixes: 0ddad21d3e ("pipe: use exclusive waits when reading or writing")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is a collection of trivial fixes including fixing whitespace, typos,
function headers, reverse Christmas tree, etc.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Use the correct netif_msg_[tx,rx]_error() function to determine whether to
print the MDD event type.
Signed-off-by: Ben Shelton <benjamin.h.shelton@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
1. Remove local variable num_q_vectors and use vsi->num_q_vectors instead
2. Remove local variable pf and pass vsi->back to ice_pf_to_dev
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Formatting strings in print function calls (like dev_info, dev_err, etc.)
can exceed 80 columns without making checkpatch unhappy. So remove
newlines where applicable and make print statements more compact.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Use ice_pf_to_dev(pf) instead of &pf->pdev->dev
Use ice_pf_to_dev(vsi->back) instead of &vsi->back->pdev->dev
When a pointer to the pf instance is available, use ice_pf_to_dev
instead of ice_hw_to_dev
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Commit 1f45ebe0d8 ("ice: add extra check for null Rx descriptor") moved
the call to ice_construct_skb() under a null check as Coverity reported a
possible use of null skb. However, the original call was not deleted, do so
now.
Fixes: 1f45ebe0d8 ("ice: add extra check for null Rx descriptor")
Reported-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
After a reset the Unit Load Status bits in the GLNVM_ULD register to check
for completion should be 0x7FF before continuing. Update the mask to check
(minus the three reserved bits that are always set).
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Logging the firmware/NVM information during driver load is redundant since
that information is also available via ethtool. Move the functionality
found in ice_nvm_version_str() directly into ice_get_drvinfo() and remove
calling the former and logging that info during driver probe. This also
gets rid of a bug in ice_nvm_version_str() where it returns a pointer to
a buffer which is free'ed when that function exits.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This patch modifies link message logging to include "Full Duplex" and
"Negotiated" for FEC, so as to distinguish it from "Requested" FEC.
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Remove unnecessary CONFIG_PCI_IOV wrapping in ice_set_pf_caps. None
of the data structures accessed within the block are wrapped with
this flag. When CONFIG_PCI_IOV is undefined, pf->num_vfs_supported
will be 0 anyway.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
ice_dev_onetime_setup contains driver workarounds needed for
firmware limitations. These issues have now been resolved in newer
NVMs so remove the function.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Currently we compare the value we are about to write to the Rx tail
register with the previous value of next_to_use. The problem with this
is we only write tail on 8 descriptor boundaries, but next_to_use is
updated whenever we clean Rx descriptors. Fix this by comparing the
value we are about to write to tail with the previously written tail
value. This will prevent duplicate Rx tail bumps.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Display all of the supported and advertised link modes based on the PHY
capability with media.
Displaying all supported modes is more informative then only displaying
the current link mode.
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
When switching between FW and SW LLDP mode, the
number of configured TLV apps in the driver's
DCB configuration is getting out of synch with
what lldpad thinks is configured. This is causing
a problem when shutting down lldpad. The cleanup
is trying to delete TLV apps that are not defined
in the kernel.
Since the driver is keeping an accurate account
of the apps defined, use the drivers number of
apps to determine if there is an app to delete.
If the number of apps is <= 1, then do not
attempt to delete.
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The function ice_dcb_rebuild had some logic
flaws in it, and also didn't differentiate
between FW and SW modes needs.
For FW flow, the willing setting was being
forced to OFF and left that way. Unwilling
in DCB FW mode is not a supported model.
Leave the config alone and use the return value
from the set command to determine if setting the
config was successful.
The SW DCB flow does not need to need to register
for MIB change events (as they are not used in
SW mode).
Use !is_sw_lldp checks to only perform FW specific
task while in FW mode.
Also adding a reapplication of the current DCB
config after a link event. Some NVMs are not
maintaining their DCB configs across link events.
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Due to some merge conflict, this file ended being alone under
Documentation/virtual.
The file itself is almost at ReST format. Just minor
adjustments are needed:
- Adjust title markup;
- Adjust a list identation;
- add a literal block markup;
- Add some blank lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This file is already in ReST compatible format.
So, rename it and add to the kvm's index.rst.
While here, use the standard conversion for document titles.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use document title and chapter markups;
- Add markups for literal blocks;
- Add markups for tables;
- use :field: for field descriptions;
- Add blank lines and adjust indentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This file is almost in ReST format. Just one change was
needed:
- Add markups for a literal block and change its indentation.
While here, use the standard markup for the document title.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use document title and chapter markups;
- Add markups for tables;
- Use list markups;
- Add markups for literal blocks;
- Add blank lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This file is almost in ReST format. Just a small set of
changes were needed:
- Add markups for lists;
- Add markups for a literal block;
- Adjust whitespaces.
While here, use the standard markup for the document title.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use document title and chapter markups;
- Add markups for tables;
- Add markups for literal blocks;
- Add blank lines and adjust indentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use document title and chapter markups;
- Add markups for literal blocks;
- use :field: for field descriptions;
- Add blank lines and adjust indentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use document title and chapter markups;
- Convert tables;
- Add markups for literal blocks;
- use :field: for field descriptions;
- Add blank lines and adjust indentation
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Add a title for the document;
- Adjust whitespaces for it to be properly formatted after
parsed.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Add proper markups for titles;
- Adjust whitespaces and blank lines to match ReST
needs;
- Mark literal blocks as such.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
convert api.txt document to ReST format while trying to keep
its format as close as possible with the authors intent, and
avoid adding uneeded markups.
- Use document title and chapter markups;
- Convert tables;
- Add markups for literal blocks;
- use :field: for field descriptions;
- Add blank lines and adjust indentation
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Shijie Luo