Principally, in order to get rid of #define RET in this code to make
place for a new RET, but also to clarify the code, rename a bunch of
things:
s/UNLOCK/IRQ_RESTORE/
s/LOCK/IRQ_SAVE/
s/BEGIN/BEGIN_IRQ_SAVE/
s/\<RET\>/RET_IRQ_RESTORE/
s/RET_ENDP/\tRET_IRQ_RESTORE\rENDP/
which then leaves RET unused so it can be removed.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211204134907.841623970@infradead.org
Currently, RETPOLINE*_CFLAGS are defined in the top-level Makefile
but only x86 makes use of them. Move them there. If ever another
architecture finds the need, it can be reconsidered.
[ bp: Massage a bit. ]
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lkml.kernel.org/r/20211119165630.219152765@infradead.org
With more NICs supporting CHECKSUM_COMPLETE, and IPv6 being widely
used csum_partial() is heavily used with small amount of bytes, and is
consuming many cycles.
IPv6 header size, for instance, is 40 bytes.
Another thing to consider is that NET_IP_ALIGN is 0 on x86, meaning
that network headers are not word-aligned, unless the driver forces
this.
This means that csum_partial() fetches one u16 to 'align the buffer',
then performs three u64 additions with carry in a loop, then a
remaining u32, then a remaining u16.
With this new version, it performs a loop only for the 64 bytes blocks,
then the remaining is bisected.
Testing on various CPUs, all of them show a big reduction in
csum_partial() cost (by 50 to 80 %)
Before:
4.16% [kernel] [k] csum_partial
After:
0.83% [kernel] [k] csum_partial
If run in a loop 1,000,000 times:
Before:
26,922,913 cycles # 3846130.429 GHz
80,302,961 instructions # 2.98 insn per cycle
21,059,816 branches # 3008545142.857 M/sec
2,896 branch-misses # 0.01% of all branches
After:
17,960,709 cycles # 3592141.800 GHz
41,292,805 instructions # 2.30 insn per cycle
11,058,119 branches # 2211623800.000 M/sec
2,997 branch-misses # 0.03% of all branches
[ bp: Massage, merge in subsequent fixes into a single patch:
- um compilation error due to missing load_unaligned_zeropad():
- Reported-by: kernel test robot <lkp@intel.com>
- Link: https://lkml.kernel.org/r/20211118175239.1525650-1-eric.dumazet@gmail.com
- Fix initial seed for odd buffers
- Reported-by: Noah Goldstein <goldstein.w.n@gmail.com>
- Link: https://lkml.kernel.org/r/20211125141817.3541501-1-eric.dumazet@gmail.com
]
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20211112161950.528886-1-eric.dumazet@gmail.com
Some bug and warning fixes:
- Fix "make install" to use debians "installkernel" script which is now in /usr/sbin
- Fix the bindeb-pkg make target by giving the correct KBUILD_IMAGE file name
- Fix compiler warnings by annotating parisc agp init functions with __init
- Fix timekeeping on SMP machines with dual-core CPUs
- Enable some more config options in the 64-bit defconfig
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYa0fHwAKCRD3ErUQojoP
X4auAQDw7wtS4zDGMmEnsLhqkWCPcqnZY0WANi7gCGN7iuJqIQD/ZfqhcBksfbO1
OyrOpcQ6QYZuiADRPPzmPsnTw0t6YwQ=
=kzK0
-----END PGP SIGNATURE-----
Merge tag 'for-5.16/parisc-6' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"Some bug and warning fixes:
- Fix "make install" to use debians "installkernel" script which is
now in /usr/sbin
- Fix the bindeb-pkg make target by giving the correct KBUILD_IMAGE
file name
- Fix compiler warnings by annotating parisc agp init functions with
__init
- Fix timekeeping on SMP machines with dual-core CPUs
- Enable some more config options in the 64-bit defconfig"
* tag 'for-5.16/parisc-6' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Mark cr16 CPU clocksource unstable on all SMP machines
parisc: Fix "make install" on newer debian releases
parisc/agp: Annotate parisc agp init functions with __init
parisc: Enable sata sil, audit and usb support on 64-bit defconfig
parisc: Fix KBUILD_IMAGE for self-extracting kernel
Here are some small USB fixes for a few reported issues. Included in
here are:
- xhci fix for a _much_ reported regression. I don't think
there's a community distro that has not reported this problem
yet :(
- new USB quirk addition
- cdns3 minor fixes
- typec regression fix.
All of these have been in linux-next with no reported problems, and the
xhci fix has been reported by many to resolve their reported problem.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYaynow8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yky3wCfVah+gTu/zrBSmBF7yFsqki9E+DQAnAxPbsFl
GXlgsBQYKU+gMwe12amB
=rXvx
-----END PGP SIGNATURE-----
Merge tag 'usb-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for a few reported issues. Included in
here are:
- xhci fix for a _much_ reported regression. I don't think there's a
community distro that has not reported this problem yet :(
- new USB quirk addition
- cdns3 minor fixes
- typec regression fix.
All of these have been in linux-next with no reported problems, and
the xhci fix has been reported by many to resolve their reported
problem"
* tag 'usb-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: cdnsp: Fix a NULL pointer dereference in cdnsp_endpoint_init()
usb: cdns3: gadget: fix new urb never complete if ep cancel previous requests
usb: typec: tcpm: Wait in SNK_DEBOUNCED until disconnect
USB: NO_LPM quirk Lenovo Powered USB-C Travel Hub
xhci: Fix commad ring abort, write all 64 bits to CRCR register.
Here are some small TTY and Serial driver fixes for 5.16-rc4 to resolve
a number of reported problems.
They include:
- liteuart serial driver fixes
- 8250_pci serial driver fixes for pericom devices
- 8250 RTS line control fix while in RS-485 mode
- tegra serial driver fix
- msm_serial driver fix
- pl011 serial driver new id
- fsl_lpuart revert of broken change
- 8250_bcm7271 serial driver fix
- MAINTAINERS file update for rpmsg tty driver that came in
5.16-rc1
- vgacon fix for reported problem
All of these, except for the 8250_bcm7271 fix have been in linux-next
with no reported problem. The 8250_bcm7271 fix was added to the tree on
Friday so no chance to be linux-next yet. But it should be fine as the
affected developers submitted it.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYayo2Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yno+wCguxkicXNPay+HXlDcImmCAXLhc/cAn34AwHP4
+Lgvooz39wYxzl5D/Qhc
=tw0u
-----END PGP SIGNATURE-----
Merge tag 'tty-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small TTY and Serial driver fixes for 5.16-rc4 to
resolve a number of reported problems.
They include:
- liteuart serial driver fixes
- 8250_pci serial driver fixes for pericom devices
- 8250 RTS line control fix while in RS-485 mode
- tegra serial driver fix
- msm_serial driver fix
- pl011 serial driver new id
- fsl_lpuart revert of broken change
- 8250_bcm7271 serial driver fix
- MAINTAINERS file update for rpmsg tty driver that came in 5.16-rc1
- vgacon fix for reported problem
All of these, except for the 8250_bcm7271 fix have been in linux-next
with no reported problem. The 8250_bcm7271 fix was added to the tree
on Friday so no chance to be linux-next yet. But it should be fine as
the affected developers submitted it"
* tag 'tty-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_bcm7271: UART errors after resuming from S2
serial: 8250_pci: rewrite pericom_do_set_divisor()
serial: 8250_pci: Fix ACCES entries in pci_serial_quirks array
serial: 8250: Fix RTS modem control while in rs485 mode
Revert "tty: serial: fsl_lpuart: drop earlycon entry for i.MX8QXP"
serial: tegra: Change lower tolerance baud rate limit for tegra20 and tegra30
serial: liteuart: relax compile-test dependencies
serial: liteuart: fix minor-number leak on probe errors
serial: liteuart: fix use-after-free and memleak on unbind
serial: liteuart: Fix NULL pointer dereference in ->remove()
vgacon: Propagate console boot parameters before calling `vc_resize'
tty: serial: msm_serial: Deactivate RX DMA for polling support
serial: pl011: Add ACPI SBSA UART match id
serial: core: fix transmit-buffer reset and memleak
MAINTAINERS: Add rpmsg tty driver maintainer
mode runs for prolonged periods with interrupts disabled and ends up
programming the next tick in the past, leading to that storm
-----BEGIN PGP SIGNATURE-----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=Ft9k
-----END PGP SIGNATURE-----
Merge tag 'timers_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Borislav Petkov:
- Prevent a tick storm when a dedicated timekeeper CPU in nohz_full
mode runs for prolonged periods with interrupts disabled and ends up
programming the next tick in the past, leading to that storm
* tag 'timers_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers/nohz: Last resort update jiffies on nohz_full IRQ entry
- Fix preempt= callback return values
- Correct utime/stime resource usage reporting on nohz_full to return
the proper times instead of shorter ones
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmGspTcACgkQEsHwGGHe
VUqHhBAAhEd9DMoJwREKDCDMqc3pttNYpTpSVo1K6oBTsOh7mwEilPdlmsTl239V
jRocVJST+/JmJ424j7t0Sp42tREMKNlbyf+ddvr0oUwi0mLUnN6J83NU4WK4Jisf
gyXFIkeMR+/W6/LO7gDdq/+rlRDtJcllwHoOm1yyiy5Zc0qDrcy6CjgP5/9hEsh6
xvRvPOXbeZZVA+a+n+G9xGN836aBe1VptoABbdAlOSTiOvAVkS95UCb9rfPTvMtq
/71jjZMmhTxGUhg5oLpgvfRRZE608X6b2RCTcAPKa5mfMpN5YMQLcD9G0f8XZjkq
iOO/+arE6XQJlTzhAEsGxkSXaVweYxRHHP1yAlWYlWV/xGhoaAyq/tXE1KusAnng
16/eTbrPb1eawpI6p1AAScCQuF/TlYZCMqjbFVhViXM5Rkd6jrii9vz/JnkdokGR
3TH0n4WAJkdZeg18WS3B0eIt6zDTvxbR9g5ap2/10xYnYHMNdHXGH8A+5Grw9/Ln
Qsv0V43OjdUK2tVuIHYblx1X9dOlLdpTEg9FCfjiZTQVor1pTwcbG62qNMozanlf
lQqI6f63E0jugHqhrqrfBvl4lUuoajN5SvXfBNFDIzxwWBGSdr+hJQXstUatfSZZ
MdmJX+Dk5cAk4CpQQ1ofPvYkS3Ade0vxaL4H++KHYtRvpPvxCXA=
=XQFF
-----END PGP SIGNATURE-----
Merge tag 'sched_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Properly init uclamp_flags of a runqueue, on first enqueuing
- Fix preempt= callback return values
- Correct utime/stime resource usage reporting on nohz_full to return
the proper times instead of shorter ones
* tag 'sched_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/uclamp: Fix rq->uclamp_max not set on first enqueue
preempt/dynamic: Fix setup_preempt_mode() return value
sched/cputime: Fix getrusage(RUSAGE_THREAD) with nohz_full
- Use the proper operand types in __{get,put}_user() to prevent
truncation in SEV-ES string io
- Make sure the kernel mappings are present in trampoline_pgd in order
to prevent any potential accesses to unmapped memory after switching to
it
- Fix a trivial list corruption in objtool's pv_ops validation
- Disable the clocksource watchdog for TSC on platforms which claim
that the TSC is constant, doesn't stop in sleep states, CPU has TSC
adjust and the number of sockets of the platform are max 2, to prevent
erroneous markings of the TSC as unstable.
- Make sure TSC adjust is always checked not only when going idle
- Prevent a stack leak by initializing struct _fpx_sw_bytes properly in
the FPU code
- Fix INTEL_FAM6_RAPTORLAKE define naming to adhere to the convention
-----BEGIN PGP SIGNATURE-----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=d6nS
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix a couple of SWAPGS fencing issues in the x86 entry code
- Use the proper operand types in __{get,put}_user() to prevent
truncation in SEV-ES string io
- Make sure the kernel mappings are present in trampoline_pgd in order
to prevent any potential accesses to unmapped memory after switching
to it
- Fix a trivial list corruption in objtool's pv_ops validation
- Disable the clocksource watchdog for TSC on platforms which claim
that the TSC is constant, doesn't stop in sleep states, CPU has TSC
adjust and the number of sockets of the platform are max 2, to
prevent erroneous markings of the TSC as unstable.
- Make sure TSC adjust is always checked not only when going idle
- Prevent a stack leak by initializing struct _fpx_sw_bytes properly in
the FPU code
- Fix INTEL_FAM6_RAPTORLAKE define naming to adhere to the convention
* tag 'x86_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/xen: Add xenpv_restore_regs_and_return_to_usermode()
x86/entry: Use the correct fence macro after swapgs in kernel CR3
x86/entry: Add a fence for kernel entry SWAPGS in paranoid_entry()
x86/sev: Fix SEV-ES INS/OUTS instructions for word, dword, and qword
x86/64/mm: Map all kernel memory into trampoline_pgd
objtool: Fix pv_ops noinstr validation
x86/tsc: Disable clocksource watchdog for TSC on qualified platorms
x86/tsc: Add a timer to make sure TSC_adjust is always checked
x86/fpu/signal: Initialize sw_bytes in save_xstate_epilog()
x86/cpu: Drop spurious underscore from RAPTOR_LAKE #define
* New SEV-ES protocol for communicating invalid VMGEXIT requests
* Ensure APICv is considered inactive if there is no APIC
* Fix reserved bits for AMD PerfEvtSeln register
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmGscuAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOnzAgAg/0tifAOC8F31xu+gbbFa2hJsfH1
sr2QXqVI6XUWeAHw5GEEcSFHGcFc0BrmfPEL4T3tEhkTGcijL2uTK8dwgq3ue4yg
5LzaZzh03AWi4x84rV3XNVHHatzF69tgbUG49rSlK2T6BkGWzh4gI5LZV7XqNqLh
acW+92YcCGo/O9RAUYYakofX4bp0rsQaZornQiD/R5X6AlrtMUyhAYHH5Wnv69n+
MHf4K9MzrtixXbTvkOXflN5yz6TkIGvCpCK+gmppeuJ3JyZshjn+y95XcDDZtB6o
+4Ypap3SmIkjTg4VwS8lRwIFkkY31hxhW2ohRnorfP2Q5Ckcz2/kVcIEew==
=uJMy
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more kvm fixes from Paolo Bonzini:
- Static analysis fix
- New SEV-ES protocol for communicating invalid VMGEXIT requests
- Ensure APICv is considered inactive if there is no APIC
- Fix reserved bits for AMD PerfEvtSeln register
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Do not terminate SEV-ES guests on GHCB validation failure
KVM: SEV: Fall back to vmalloc for SEV-ES scratch area if necessary
KVM: SEV: Return appropriate error codes if SEV-ES scratch setup fails
KVM: x86/mmu: Retry page fault if root is invalidated by memslot update
KVM: VMX: Set failure code in prepare_vmcs02()
KVM: ensure APICv is considered inactive if there is no APIC
KVM: x86/pmu: Fix reserved bits for AMD PerfEvtSeln register
Currently, an SEV-ES guest is terminated if the validation of the VMGEXIT
exit code or exit parameters fails.
The VMGEXIT instruction can be issued from userspace, even though
userspace (likely) can't update the GHCB. To prevent userspace from being
able to kill the guest, return an error through the GHCB when validation
fails rather than terminating the guest. For cases where the GHCB can't be
updated (e.g. the GHCB can't be mapped, etc.), just return back to the
guest.
The new error codes are documented in the lasest update to the GHCB
specification.
Fixes: 291bd20d5d ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <b57280b5562893e2616257ac9c2d4525a9aeeb42.1638471124.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use kvzalloc() to allocate KVM's buffer for SEV-ES's GHCB scratch area so
that KVM falls back to __vmalloc() if physically contiguous memory isn't
available. The buffer is purely a KVM software construct, i.e. there's
no need for it to be physically contiguous.
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211109222350.2266045-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Return appropriate error codes if setting up the GHCB scratch area for an
SEV-ES guest fails. In particular, returning -EINVAL instead of -ENOMEM
when allocating the kernel buffer could be confusing as userspace would
likely suspect a guest issue.
Fixes: 8f423a80d2 ("KVM: SVM: Support MMIO for an SEV-ES guest")
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211109222350.2266045-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----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=hChf
-----END PGP SIGNATURE-----
Merge tag '5.16-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Three SMB3 multichannel/fscache fixes and a DFS fix.
In testing multichannel reconnect scenarios recently various problems
with the cifs.ko implementation of fscache were found (e.g. incorrect
initialization of fscache cookies in some cases)"
* tag '5.16-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: avoid use of dstaddr as key for fscache client cookie
cifs: add server conn_id to fscache client cookie
cifs: wait for tcon resource_id before getting fscache super
cifs: fix missed refcounting of ipc tcon
In commit c8c3735997 ("parisc: Enhance detection of synchronous cr16
clocksources") I assumed that CPUs on the same physical core are syncronous.
While booting up the kernel on two different C8000 machines, one with a
dual-core PA8800 and one with a dual-core PA8900 CPU, this turned out to be
wrong. The symptom was that I saw a jump in the internal clocks printed to the
syslog and strange overall behaviour. On machines which have 4 cores (2
dual-cores) the problem isn't visible, because the current logic already marked
the cr16 clocksource unstable in this case.
This patch now marks the cr16 interval timers unstable if we have more than one
CPU in the system, and it fixes this issue.
Fixes: c8c3735997 ("parisc: Enhance detection of synchronous cr16 clocksources")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v5.15+
On newer debian releases the debian-provided "installkernel" script is
installed in /usr/sbin. Fix the kernel install.sh script to look for the
script in this directory as well.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v3.13+
-----BEGIN PGP SIGNATURE-----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=QBwo
-----END PGP SIGNATURE-----
Merge tag 'block-5.16-2021-12-03' of git://git.kernel.dk/linux-block
Pull block fix from Jens Axboe:
"A single fix for repeated printk spam from loop"
* tag 'block-5.16-2021-12-03' of git://git.kernel.dk/linux-block:
loop: Use pr_warn_once() for loop_control_remove() warning
-----BEGIN PGP SIGNATURE-----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=Xy6S
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.16-2021-12-03' of git://git.kernel.dk/linux-block
Pull io_uring fix from Jens Axboe:
"Just a single fix preventing repeated retries of task_work based io-wq
thread creation, fixing a regression from when io-wq was made more (a
bit too much) resilient against signals"
* tag 'io_uring-5.16-2021-12-03' of git://git.kernel.dk/linux-block:
io-wq: don't retry task_work creation failure on fatal conditions
two patches, both in drivers. One is a fix to FC recovery (lpfc) and
the other is an enhancement to support the Intel Alder Motherboard
with the UFS driver which comes under the -rc exception process for
hardware enabling.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYat3yyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbwKAP9yj4Da
52hzcLcbjT6Z0SurmLrGd4fTaAinSDueSGvh5wEA/QDugzP7CEnogk9S7cAfJLQf
QO1HhyRn6Vx+0r57Cj0=
=0aRn
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two patches, both in drivers.
One is a fix to FC recovery (lpfc) and the other is an enhancement to
support the Intel Alder Motherboard with the UFS driver which comes
under the -rc exception process for hardware enabling"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: ufs-pci: Add support for Intel ADL
scsi: lpfc: Fix non-recovery of remote ports following an unsolicited LOGO
* Since commit 486408d690 ("gfs2: Cancel remote delete work
asynchronously"), inode create and lookup-by-number can overlap more
easily and we can end up with temporary duplicate inodes. Fix the
code to prevent that.
* Fix a BUG demoting weak glock holders from a remote node.
-----BEGIN PGP SIGNATURE-----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=7HvB
-----END PGP SIGNATURE-----
Merge tag 'gfs2-v5.16-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fixes from Andreas Gruenbacher:
- Since commit 486408d690 ("gfs2: Cancel remote delete work
asynchronously"), inode create and lookup-by-number can overlap more
easily and we can end up with temporary duplicate inodes. Fix the
code to prevent that.
- Fix a BUG demoting weak glock holders from a remote node.
* tag 'gfs2-v5.16-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: gfs2_create_inode rework
gfs2: gfs2_inode_lookup rework
gfs2: gfs2_inode_lookup cleanup
gfs2: Fix remote demote of weak glock holders
Commit d81ae8aac8 ("sched/uclamp: Fix initialization of struct
uclamp_rq") introduced a bug where uclamp_max of the rq is not reset to
match the woken up task's uclamp_max when the rq is idle.
The code was relying on rq->uclamp_max initialized to zero, so on first
enqueue
static inline void uclamp_rq_inc_id(struct rq *rq, struct task_struct *p,
enum uclamp_id clamp_id)
{
...
if (uc_se->value > READ_ONCE(uc_rq->value))
WRITE_ONCE(uc_rq->value, uc_se->value);
}
was actually resetting it. But since commit d81ae8aac8 changed the
default to 1024, this no longer works. And since rq->uclamp_flags is
also initialized to 0, neither above code path nor uclamp_idle_reset()
update the rq->uclamp_max on first wake up from idle.
This is only visible from first wake up(s) until the first dequeue to
idle after enabling the static key. And it only matters if the
uclamp_max of this task is < 1024 since only then its uclamp_max will be
effectively ignored.
Fix it by properly initializing rq->uclamp_flags = UCLAMP_FLAG_IDLE to
ensure uclamp_idle_reset() is called which then will update the rq
uclamp_max value as expected.
Fixes: d81ae8aac8 ("sched/uclamp: Fix initialization of struct uclamp_rq")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <Valentin.Schneider@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lkml.kernel.org/r/20211202112033.1705279-1-qais.yousef@arm.com
__setup() callbacks expect 1 for success and 0 for failure. Correct the
usage here to reflect that.
Fixes: 826bfeb37b ("preempt/dynamic: Support dynamic preempt with preempt= boot option")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211203233203.133581-1-ahalaney@redhat.com
- Disable DTPM for this cycle to prevent it from causing issues
to appear on otherwise functional systems (Daniel Lezcano).
- Fix cpufreq sysfs interface failure related to physical CPU
hot-add (Xiongfeng Wang).
- Fix comment in cpufreq core and update its documentation (Tang
Yizhou).
-----BEGIN PGP SIGNATURE-----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=mcYo
-----END PGP SIGNATURE-----
Merge tag 'pm-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a CPU hot-add issue in the cpufreq core, fix a comment in
the cpufreq core code and update its documentation, and disable the
DTPM (Dynamic Thermal Power Management) code for the time being to
prevent it from causing issues to appear.
Specifics:
- Disable DTPM for this cycle to prevent it from causing issues to
appear on otherwise functional systems (Daniel Lezcano)
- Fix cpufreq sysfs interface failure related to physical CPU hot-add
(Xiongfeng Wang)
- Fix comment in cpufreq core and update its documentation (Tang
Yizhou)"
* tag 'pm-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
powercap: DTPM: Drop unused local variable from init_dtpm()
cpufreq: docs: Update core.rst
cpufreq: Fix a comment in cpufreq_policy_free
powercap/drivers/dtpm: Disable DTPM at boot time
cpufreq: Fix get_cpu_device() failure in add_cpu_dev_symlink()
- Add missing BTI landing instructions to the ftrace*_caller trampolines
- Fix kexec() WARN when DEBUG_VIRTUAL is enabled
- Fix PAC documentation by removing stale references to compiler flags
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmGp/DwQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNBRNCACxT4pnnSuZssYZLdn+bVh9ahLqDwATfsYQ
NZJEzPmaS2QoLZZ3a6ZwRUjnH7VAfsxHyq17m1SN8Hbx5mh3ZkWNbN4sEy8vlLz8
m7NK0YKU12SMlP8Vmlgw9gzXgk4yQ/OnK2Jl50SQCGkT3MvCohx16X4lcY+M1oTq
2+9Rwbpi05T0G7rIFQFPwWqbJyiCoJ0Xr/iVmo1IX74yVp0oT1SGTBADcIsCIHRO
/xVlsHEsOQWtguZcwZE8UDVtBCgrZFnJh3P+EENlRBZ48ANsWCcQpGMf+wrsrG+l
chIKU3oLFLe1JcNV1zG8D8RdwQA9r/MSzq0KZFJTw+CNvM11AqAg
=JEy/
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Three arm64 fixes for -rc4.
One of them is just a trivial documentation fix, whereas the other two
address a warning in the kexec code and a crash in ftrace on systems
implementing BTI.
The latter patch has a couple of ugly ifdefs which Mark plans to clean
up separately, but as-is the patch is straightforward for backporting
to stable kernels.
Summary:
- Add missing BTI landing instructions to the ftrace*_caller
trampolines
- Fix kexec() WARN when DEBUG_VIRTUAL is enabled
- Fix PAC documentation by removing stale references to compiler
flags"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: ftrace: add missing BTIs
arm64: kexec: use __pa_symbol(empty_zero_page)
arm64: update PAC description for kernel
Pull i2c fixes from Wolfram Sang:
"I2C has another set of driver bugfixes, mostly for the stm32f7 driver"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: rk3x: Handle a spurious start completion interrupt flag
i2c: stm32f7: use proper DMAENGINE API for termination
i2c: stm32f7: stop dma transfer in case of NACK
i2c: stm32f7: recover the bus on access timeout
i2c: stm32f7: flush TX FIFO upon transfer errors
i2c: cbus-gpio: set atomic transfer callback
Two sparse warning fixes and a couple of patches to fix an issue with
sata_fsl driver module removal:
* A couple of patches to avoid sparse warnings in libata-sata and
in the pata_falcon driver (from Yang and Finn).
* A couple of sata_fsl driver patches fixing IRQ free and proc
unregister on module removal (from Baokun).
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCYanzwQAKCRDdoc3SxdoY
dhBlAP92gjrDrWQrpmO/yIpA+wY5IdzbDldY/32f/aMMOu3exAEAxiD4vQhY9x39
qRmZyIq74zWUP9NXdqkhlLL3YYI/uA4=
=uwTI
-----END PGP SIGNATURE-----
Merge tag 'libata-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull libata fixes from Damien Le Moal:
"Two sparse warning fixes and a couple of patches to fix an issue with
sata_fsl driver module removal:
- A couple of patches to avoid sparse warnings in libata-sata and in
the pata_falcon driver (from Yang and Finn).
- A couple of sata_fsl driver patches fixing IRQ free and proc
unregister on module removal (from Baokun)"
* tag 'libata-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: replace snprintf in show functions with sysfs_emit
sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl
pata_falcon: Avoid type warnings from sparse
server->dstaddr can change when the DNS mapping for the
server hostname changes. But conn_id is a u64 counter
that is incremented each time a new TCP connection
is setup. So use only that as a key.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
The fscache client cookie uses the server address
(and port) as the cookie key. This is a problem when
nosharesock is used. Two different connections will
use duplicate cookies. Avoid this by adding
server->conn_id to the key, so that it's guaranteed
that cookie will not be duplicated.
Also, for secondary channels of a session, copy the
fscache pointer from the primary channel. The primary
channel is guaranteed not to go away as long as secondary
channels are in use. Also addresses minor problem found
by kernel test robot.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
The logic for initializing tcon->resource_id is done inside
cifs_root_iget. fscache super cookie relies on this for aux
data. So we need to push the fscache initialization to this
later point during mount.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix missed refcounting of IPC tcon used for getting domain-based DFS
root referrals. We want to keep it alive as long as mount is active
and can be refreshed. For standalone DFS root referrals it wouldn't
be a problem as the client ends up having an IPC tcon for both mount
and cache.
Fixes: c88f7dcd6d ("cifs: support nested dfs links over reconnect")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
In the native case, PER_CPU_VAR(cpu_tss_rw + TSS_sp0) is the
trampoline stack. But XEN pv doesn't use trampoline stack, so
PER_CPU_VAR(cpu_tss_rw + TSS_sp0) is also the kernel stack.
In that case, source and destination stacks are identical, which means
that reusing swapgs_restore_regs_and_return_to_usermode() in XEN pv
would cause %rsp to move up to the top of the kernel stack and leave the
IRET frame below %rsp.
This is dangerous as it can be corrupted if #NMI / #MC hit as either of
these events occurring in the middle of the stack pushing would clobber
data on the (original) stack.
And, with XEN pv, swapgs_restore_regs_and_return_to_usermode() pushing
the IRET frame on to the original address is useless and error-prone
when there is any future attempt to modify the code.
[ bp: Massage commit message. ]
Fixes: 7f2590a110 ("x86/entry/64: Use a per-CPU trampoline stack for IDT entries")
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lkml.kernel.org/r/20211126101209.8613-4-jiangshanlai@gmail.com
The commit
c758907004 ("x86/entry/64: Remove unneeded kernel CR3 switching")
removed a CR3 write in the faulting path of load_gs_index().
But the path's FENCE_SWAPGS_USER_ENTRY has no fence operation if PTI is
enabled, see spectre_v1_select_mitigation().
Rather, it depended on the serializing CR3 write of SWITCH_TO_KERNEL_CR3
and since it got removed, add a FENCE_SWAPGS_KERNEL_ENTRY call to make
sure speculation is blocked.
[ bp: Massage commit message and comment. ]
Fixes: c758907004 ("x86/entry/64: Remove unneeded kernel CR3 switching")
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211126101209.8613-3-jiangshanlai@gmail.com
Jann Horn points out that there is another possible race wrt Unix domain
socket garbage collection, somewhat reminiscent of the one fixed in
commit cbcf01128d ("af_unix: fix garbage collect vs MSG_PEEK").
See the extended comment about the garbage collection requirements added
to unix_peek_fds() by that commit for details.
The race comes from how we can locklessly look up a file descriptor just
as it is in the process of being closed, and with the right artificial
timing (Jann added a few strategic 'mdelay(500)' calls to do that), the
Unix domain socket garbage collector could see the reference count
decrement of the close() happen before fget() took its reference to the
file and the file was attached onto a new file descriptor.
This is all (intentionally) correct on the 'struct file *' side, with
RCU lookups and lockless reference counting very much part of the
design. Getting that reference count out of order isn't a problem per
se.
But the garbage collector can get confused by seeing this situation of
having seen a file not having any remaining external references and then
seeing it being attached to an fd.
In commit cbcf01128d ("af_unix: fix garbage collect vs MSG_PEEK") the
fix was to serialize the file descriptor install with the garbage
collector by taking and releasing the unix_gc_lock.
That's not really an option here, but since this all happens when we are
in the process of looking up a file descriptor, we can instead simply
just re-check that the file hasn't been closed in the meantime, and just
re-do the lookup if we raced with a concurrent close() of the same file
descriptor.
Reported-and-tested-by: Jann Horn <jannh@google.com>
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit
18ec54fdd6 ("x86/speculation: Prepare entry code for Spectre v1 swapgs mitigations")
added FENCE_SWAPGS_{KERNEL|USER}_ENTRY for conditional SWAPGS. In
paranoid_entry(), it uses only FENCE_SWAPGS_KERNEL_ENTRY for both
branches. This is because the fence is required for both cases since the
CR3 write is conditional even when PTI is enabled.
But
96b2371413 ("x86/entry/64: Switch CR3 before SWAPGS in paranoid entry")
changed the order of SWAPGS and the CR3 write. And it missed the needed
FENCE_SWAPGS_KERNEL_ENTRY for the user gsbase case.
Add it back by changing the branches so that FENCE_SWAPGS_KERNEL_ENTRY
can cover both branches.
[ bp: Massage, fix typos, remove obsolete comment while at it. ]
Fixes: 96b2371413 ("x86/entry/64: Switch CR3 before SWAPGS in paranoid entry")
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211126101209.8613-2-jiangshanlai@gmail.com
Merge DTPM fixes for 5.16-rc4.
* powercap:
powercap: DTPM: Drop unused local variable from init_dtpm()
powercap/drivers/dtpm: Disable DTPM at boot time
Properly type the operands being passed to __put_user()/__get_user().
Otherwise, these routines truncate data for dependent instructions
(e.g., INSW) and only read/write one byte.
This has been tested by sending a string with REP OUTSW to a port and
then reading it back in with REP INSW on the same port.
Previous behavior was to only send and receive the first char of the
size. For example, word operations for "abcd" would only read/write
"ac". With change, the full string is now written and read back.
Fixes: f980f9c31a (x86/sev-es: Compile early handler code into kernel image)
Signed-off-by: Michael Sterritt <sterritt@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marc Orr <marcorr@google.com>
Reviewed-by: Peter Gonda <pgonda@google.com>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Link: https://lkml.kernel.org/r/20211119232757.176201-1-sterritt@google.com
The dtpm_descr variable in init_dtpm() is not used after commit
f751db8ada ("powercap/drivers/dtpm: Disable DTPM at boot time"),
so drop it.
Fixes: f751db8ada ("powercap/drivers/dtpm: Disable DTPM at boot time")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We don't want to be retrying task_work creation failure if there's
an actual signal pending for the parent task. If we do, then we can
enter an infinite loop of perpetually retrying and each retry failing
with -ERESTARTNOINTR because a signal is pending.
Fixes: 3146cba99a ("io-wq: make worker creation resilient against signals")
Reported-by: Florian Fischer <florian.fl.fischer@fau.de>
Link: https://lore.kernel.org/io-uring/20211202165606.mqryio4yzubl7ms5@pasture/
Tested-by: Florian Fischer <florian.fl.fischer@fau.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is a small window in time during resume where the hardware
flow control signal RTS can be asserted (which allows a sender to
resume sending data to the UART) but the baud rate has not yet
been restored. This will cause corrupted data and FRAMING, OVERRUN
and BREAK errors. This is happening because the MCTRL register is
shadowed in uart_port struct and is later used during resume to set
the MCTRL register during both serial8250_do_startup() and
uart_resume_port(). Unfortunately, serial8250_do_startup()
happens before the UART baud rate is restored. The fix is to clear
the shadowed mctrl value at the end of suspend and restore it at the
end of resume.
Fixes: 41a469482d ("serial: 8250: Add new 8250-core based Broadcom STB driver")
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Link: https://lore.kernel.org/r/20211201201402.47446-1-alcooperx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In cdnsp_endpoint_init(), cdnsp_ring_alloc() is assigned to pep->ring
and there is a dereference of it in cdnsp_endpoint_init(), which could
lead to a NULL pointer dereference on failure of cdnsp_ring_alloc().
Fix this bug by adding a check of pep->ring.
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_USB_CDNSP_GADGET=y show no new warnings,
and our static analyzer no longer warns about this code.
Fixes: 3d82904559 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Cc: stable <stable@vger.kernel.org>
Acked-by: Pawel Laszczak <pawell@cadence.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Link: https://lore.kernel.org/r/20211130172700.206650-1-zhou1615@umn.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is another branded 8153 device that doesn't work well with LPM:
r8152 2-2.1:1.0 enp0s13f0u2u1: Stop submitting intr, status -71
Disable LPM to resolve the issue.
Signed-off-by: Ole Ernst <olebowle@gmx.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211127090546.52072-1-olebowle@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Turns out some xHC controllers require all 64 bits in the CRCR register
to be written to execute a command abort.
The lower 32 bits containing the command abort bit is written first.
In case the command ring stops before we write the upper 32 bits then
hardware may use these upper bits to set the commnd ring dequeue pointer.
Solve this by making sure the upper 32 bits contain a valid command
ring dequeue pointer.
The original patch that only wrote the first 32 to stop the ring went
to stable, so this fix should go there as well.
Fixes: ff0e50d356 ("xhci: Fix command ring pointer corruption while aborting a command")
Cc: stable@vger.kernel.org
Tested-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211126122340.1193239-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The trampoline_pgd only maps the 0xfffffff000000000-0xffffffffffffffff
range of kernel memory (with 4-level paging). This range contains the
kernel's text+data+bss mappings and the module mapping space but not the
direct mapping and the vmalloc area.
This is enough to get the application processors out of real-mode, but
for code that switches back to real-mode the trampoline_pgd is missing
important parts of the address space. For example, consider this code
from arch/x86/kernel/reboot.c, function machine_real_restart() for a
64-bit kernel:
#ifdef CONFIG_X86_32
load_cr3(initial_page_table);
#else
write_cr3(real_mode_header->trampoline_pgd);
/* Exiting long mode will fail if CR4.PCIDE is set. */
if (boot_cpu_has(X86_FEATURE_PCID))
cr4_clear_bits(X86_CR4_PCIDE);
#endif
/* Jump to the identity-mapped low memory code */
#ifdef CONFIG_X86_32
asm volatile("jmpl *%0" : :
"rm" (real_mode_header->machine_real_restart_asm),
"a" (type));
#else
asm volatile("ljmpl *%0" : :
"m" (real_mode_header->machine_real_restart_asm),
"D" (type));
#endif
The code switches to the trampoline_pgd, which unmaps the direct mapping
and also the kernel stack. The call to cr4_clear_bits() will find no
stack and crash the machine. The real_mode_header pointer below points
into the direct mapping, and dereferencing it also causes a crash.
The reason this does not crash always is only that kernel mappings are
global and the CR3 switch does not flush those mappings. But if theses
mappings are not in the TLB already, the above code will crash before it
can jump to the real-mode stub.
Extend the trampoline_pgd to contain all kernel mappings to prevent
these crashes and to make code which runs on this page-table more
robust.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20211202153226.22946-5-joro@8bytes.org
Peter Zijlstra