Commit Graph

233 Commits

Author SHA1 Message Date
Linus Walleij 45ad7db90b gpio: revert get() to non-errorprogating behaviour
commit e20538b82f
("gpio: Propagate errors from chip->get()")
started to propagate errors from the .get() functions since
we can get errors from the infrastructure of e.g. slowbus
GPIO expanders.

However it turns out a bunch of drivers relied on the core
to clamp the value, so we need to revert to the old behaviour
and go over all drivers and fix them to conform to the
expectations of the core before we go back to propagating
the error code.

Cc: stable@vger.kernel.org # 4.3+
Cc: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Cc: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Fixes: e20538b82f ("gpio: Propagate errors from chip->get()")
Reported-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-17 15:48:29 +01:00
Vladimir Zapolskiy d06165b329 gpiolib: fix oops, if gpio name is NULL
Commit c0017ed719 ("gpio: Introduce gpio descriptor 'name'") causes
OOPS on boot on LPC32xx boards:

    Unable to handle kernel NULL pointer dereference at virtual address 00000000
    CPU: 0 PID: 1 Comm: swapper Not tainted 4.3.0+ #707
    Hardware name: LPC32XX SoC (Flattened Device Tree)
    task: c381baa0 ti: c381e000 task.ti: c381e000
    PC is at strcmp+0x10/0x40
    LR is at gpiochip_add+0x3d0/0x4d4
    pc : [<>]    lr : [<>]    psr: a0000093
    sp : c381fd60  ip : c381fd70  fp : c381fd6c

    [snip]

    Backtrace:
    [<>] (strcmp) from [<>] (gpiochip_add+0x3d0/0x4d4)
    [<>] (gpiochip_add) from [<>] (lpc32xx_gpio_probe+0x44/0x60)
    [<>] (lpc32xx_gpio_probe) from [<>] (platform_drv_probe+0x40/0x8c)
    [<>] (platform_drv_probe) from [<>] (driver_probe_device+0x110/0x294)
    [<>] (driver_probe_device) from [<>] (__driver_attach+0x70/0x94)
    [<>] (__driver_attach) from [<>] (bus_for_each_dev+0x74/0x98)
    [<>] (bus_for_each_dev) from [<>] (driver_attach+0x20/0x28)
    [<>] (driver_attach) from [<>] (bus_add_driver+0xd4/0x1f0)
    [<>] (bus_add_driver) from [<>] (driver_register+0xa4/0xe8)
    [<>] (driver_register) from [<>] (__platform_driver_register+0x38/0x4c)
    [<>] (__platform_driver_register) from [<>] (lpc32xx_gpio_driver_init+0x18/0x20)
    [<>] (lpc32xx_gpio_driver_init) from [<>] (do_one_initcall+0x108/0x1c8)
    [<>] (do_one_initcall) from [<>] (kernel_init_freeable+0x10c/0x1d4)
    [<>] (kernel_init_freeable) from [<>] (kernel_init+0x10/0xec)
    [<>] (kernel_init) from [<>] (ret_from_fork+0x14/0x24)

This is caused by the fact that at the moment some GPIO names are set
to NULL, there is a hole in linear representation of one GPI bank, see
drivers/gpio/gpio-lpc32xx.c / gpi_p3_names[] for details.

The same problem most probably affects also gpio-cs5535.c, see
cs5535_gpio_names[].

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-29 22:17:40 +01:00
Linus Torvalds 0d51ce9ca1 Power management and ACPI updates for v4.4-rc1
- ACPICA update to upstream revision 20150930 (Bob Moore, Lv Zheng).
 
    The most significant change is to allow the AML debugger to be
    built into the kernel.  On top of that there is an update related
    to the NFIT table (the ACPI persistent memory interface)
    and a few fixes and cleanups.
 
  - ACPI CPPC2 (Collaborative Processor Performance Control v2)
    support along with a cpufreq frontend (Ashwin Chaugule).
 
    This can only be enabled on ARM64 at this point.
 
  - New ACPI infrastructure for the early probing of IRQ chips and
    clock sources (Marc Zyngier).
 
  - Support for a new hierarchical properties extension of the ACPI
    _DSD (Device Specific Data) device configuration object allowing
    the kernel to handle hierarchical properties (provided by the
    platform firmware this way) automatically and make them available
    to device drivers via the generic device properties interface
    (Rafael Wysocki).
 
  - Generic device properties API extension to obtain an index of
    certain string value in an array of strings, along the lines of
    of_property_match_string(), but working for all of the supported
    firmware node types, and support for the "dma-names" device
    property based on it (Mika Westerberg).
 
  - ACPI core fix to parse the MADT (Multiple APIC Description Table)
    entries in the order expected by platform firmware (and mandated
    by the specification) to avoid confusion on systems with more than
    255 logical CPUs (Lukasz Anaczkowski).
 
  - Consolidation of the ACPI-based handling of PCI host bridges
    on x86 and ia64 (Jiang Liu).
 
  - ACPI core fixes to ensure that the correct IRQ number is used to
    represent the SCI (System Control Interrupt) in the cases when
    it has been re-mapped (Chen Yu).
 
  - New ACPI backlight quirk for Lenovo IdeaPad S405 (Hans de Goede).
 
  - ACPI EC driver fixes (Lv Zheng).
 
  - Assorted ACPI fixes and cleanups (Dan Carpenter, Insu Yun, Jiri
    Kosina, Rami Rosen, Rasmus Villemoes).
 
  - New mechanism in the PM core allowing drivers to check if the
    platform firmware is going to be involved in the upcoming system
    suspend or if it has been involved in the suspend the system is
    resuming from at the moment (Rafael Wysocki).
 
    This should allow drivers to optimize their suspend/resume
    handling in some cases and the changes include a couple of users
    of it (the i8042 input driver, PCI PM).
 
  - PCI PM fix to prevent runtime-suspended devices with PME enabled
    from being resumed during system suspend even if they aren't
    configured to wake up the system from sleep (Rafael Wysocki).
 
  - New mechanism to report the number of a wakeup IRQ that woke up
    the system from sleep last time (Alexandra Yates).
 
  - Removal of unused interfaces from the generic power domains
    framework and fixes related to latency measurements in that
    code (Ulf Hansson, Daniel Lezcano).
 
  - cpufreq core sysfs interface rework to make it handle CPUs that
    share performance scaling settings (represented by a common
    cpufreq policy object) more symmetrically (Viresh Kumar).
 
    This should help to simplify the CPU offline/online handling among
    other things.
 
  - cpufreq core fixes and cleanups (Viresh Kumar).
 
  - intel_pstate fixes related to the Turbo Activation Ratio (TAR)
    mechanism on client platforms which causes the turbo P-states
    range to vary depending on platform firmware settings (Srinivas
    Pandruvada).
 
  - intel_pstate sysfs interface fix (Prarit Bhargava).
 
  - Assorted cpufreq driver (imx, tegra20, powernv, integrator) fixes
    and cleanups (Bai Ping, Bartlomiej Zolnierkiewicz, Shilpasri G
    Bhat, Luis de Bethencourt).
 
  - cpuidle mvebu driver cleanups (Russell King).
 
  - OPP (Operating Performance Points) framework code reorganization
    to make it more maintainable (Viresh Kumar).
 
  - Intel Broxton support for the RAPL (Running Average Power Limits)
    power capping driver (Amy Wiles).
 
  - Assorted power management code fixes and cleanups (Dan Carpenter,
    Geert Uytterhoeven, Geliang Tang, Luis de Bethencourt, Rasmus
    Villemoes).
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJWOC9oAAoJEILEb/54YlRx/c8P/joflwoFsISwJccG62YTQMuc
 bMQKM4Kw0vl5La8+pkLpe5t6+mW7l81UFtYF6Dzd8LOKlD9sszD34z1lHmCeT/oR
 wn0uZpHagRyLMUfoyiEtlU/VRU6WQNNtS3EgjwUi7xgFz9Q0pjcCZ9OQ6vKov1j5
 +6j40ODif5sgo+2vl+rztJiV0SIMkYdkgNqgfN1FE9bdLA2Zkk+PxxJbtGQORuDu
 O/K+XhQT2xWquVWi/1p+VtQxs5glBS1oKm0kogV5bElCvNTRNIVABUNcjogITQwo
 QSAKgoCKIoaIl5jtDT6u5dc0y67q/dMtqOY9fOCcOz1Z7jbWQzR8D7mpFWIsJUPK
 K2LClI3t85ynpN6Jref246A6+C9nwB8JMAiAR11oBw7WbBlkd6tbRgcT5B+iz8UE
 FuCCif7pha/Fs+Jt1YRazscIqteQ2bAhhxikuIPMfw2M6M67MNfVNeKA1bAoSM34
 dH7JsilblitvV7shrwJHwXPXCOF2jEPoK8I4/q2+TR5qUxEpRJjelQxXGSaQScMZ
 iNnjeTgv8H8q+rY5Yjzsl4pxP0Fvf7IuqkptWOJbgepg4cQc9pS87wOpY3uEeQzr
 H7ruaQJFCnLO4aXbPNClsiJARhrBk+qMlsh4vBEyCJ2T0ucb+nIUcN4BTi8t85yl
 X97BfHHUiDoUrnIsNids
 =1gaH
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-4.4-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management and ACPI updates from Rafael Wysocki:
 "Quite a new features are included this time.

  First off, the Collaborative Processor Performance Control interface
  (version 2) defined by ACPI will now be supported on ARM64 along with
  a cpufreq frontend for CPU performance scaling.

  Second, ACPI gets a new infrastructure for the early probing of IRQ
  chips and clock sources (along the lines of the existing similar
  mechanism for DT).

  Next, the ACPI core and the generic device properties API will now
  support a recently introduced hierarchical properties extension of the
  _DSD (Device Specific Data) ACPI device configuration object.  If the
  ACPI platform firmware uses that extension to organize device
  properties in a hierarchical way, the kernel will automatically handle
  it and make those properties available to device drivers via the
  generic device properties API.

  It also will be possible to build the ACPICA's AML interpreter
  debugger into the kernel now and use that to diagnose AML-related
  problems more efficiently.  In the future, this should make it
  possible to single-step AML execution and do similar things.
  Interesting stuff, although somewhat experimental at this point.

  Finally, the PM core gets a new mechanism that can be used by device
  drivers to distinguish between suspend-to-RAM (based on platform
  firmware support) and suspend-to-idle (or other variants of system
  suspend the platform firmware is not involved in) and possibly
  optimize their device suspend/resume handling accordingly.

  In addition to that, some existing features are re-organized quite
  substantially.

  First, the ACPI-based handling of PCI host bridges on x86 and ia64 is
  unified and the common code goes into the ACPI core (so as to reduce
  code duplication and eliminate non-essential differences between the
  two architectures in that area).

  Second, the Operating Performance Points (OPP) framework is
  reorganized to make the code easier to find and follow.

  Next, the cpufreq core's sysfs interface is reorganized to get rid of
  the "primary CPU" concept for configurations in which the same
  performance scaling settings are shared between multiple CPUs.

  Finally, some interfaces that aren't necessary any more are dropped
  from the generic power domains framework.

  On top of the above we have some minor extensions, cleanups and bug
  fixes in multiple places, as usual.

  Specifics:

   - ACPICA update to upstream revision 20150930 (Bob Moore, Lv Zheng).

     The most significant change is to allow the AML debugger to be
     built into the kernel.  On top of that there is an update related
     to the NFIT table (the ACPI persistent memory interface) and a few
     fixes and cleanups.

   - ACPI CPPC2 (Collaborative Processor Performance Control v2) support
     along with a cpufreq frontend (Ashwin Chaugule).

     This can only be enabled on ARM64 at this point.

   - New ACPI infrastructure for the early probing of IRQ chips and
     clock sources (Marc Zyngier).

   - Support for a new hierarchical properties extension of the ACPI
     _DSD (Device Specific Data) device configuration object allowing
     the kernel to handle hierarchical properties (provided by the
     platform firmware this way) automatically and make them available
     to device drivers via the generic device properties interface
     (Rafael Wysocki).

   - Generic device properties API extension to obtain an index of
     certain string value in an array of strings, along the lines of
     of_property_match_string(), but working for all of the supported
     firmware node types, and support for the "dma-names" device
     property based on it (Mika Westerberg).

   - ACPI core fix to parse the MADT (Multiple APIC Description Table)
     entries in the order expected by platform firmware (and mandated by
     the specification) to avoid confusion on systems with more than 255
     logical CPUs (Lukasz Anaczkowski).

   - Consolidation of the ACPI-based handling of PCI host bridges on x86
     and ia64 (Jiang Liu).

   - ACPI core fixes to ensure that the correct IRQ number is used to
     represent the SCI (System Control Interrupt) in the cases when it
     has been re-mapped (Chen Yu).

   - New ACPI backlight quirk for Lenovo IdeaPad S405 (Hans de Goede).

   - ACPI EC driver fixes (Lv Zheng).

   - Assorted ACPI fixes and cleanups (Dan Carpenter, Insu Yun, Jiri
     Kosina, Rami Rosen, Rasmus Villemoes).

   - New mechanism in the PM core allowing drivers to check if the
     platform firmware is going to be involved in the upcoming system
     suspend or if it has been involved in the suspend the system is
     resuming from at the moment (Rafael Wysocki).

     This should allow drivers to optimize their suspend/resume handling
     in some cases and the changes include a couple of users of it (the
     i8042 input driver, PCI PM).

   - PCI PM fix to prevent runtime-suspended devices with PME enabled
     from being resumed during system suspend even if they aren't
     configured to wake up the system from sleep (Rafael Wysocki).

   - New mechanism to report the number of a wakeup IRQ that woke up the
     system from sleep last time (Alexandra Yates).

   - Removal of unused interfaces from the generic power domains
     framework and fixes related to latency measurements in that code
     (Ulf Hansson, Daniel Lezcano).

   - cpufreq core sysfs interface rework to make it handle CPUs that
     share performance scaling settings (represented by a common cpufreq
     policy object) more symmetrically (Viresh Kumar).

     This should help to simplify the CPU offline/online handling among
     other things.

   - cpufreq core fixes and cleanups (Viresh Kumar).

   - intel_pstate fixes related to the Turbo Activation Ratio (TAR)
     mechanism on client platforms which causes the turbo P-states range
     to vary depending on platform firmware settings (Srinivas
     Pandruvada).

   - intel_pstate sysfs interface fix (Prarit Bhargava).

   - Assorted cpufreq driver (imx, tegra20, powernv, integrator) fixes
     and cleanups (Bai Ping, Bartlomiej Zolnierkiewicz, Shilpasri G
     Bhat, Luis de Bethencourt).

   - cpuidle mvebu driver cleanups (Russell King).

   - OPP (Operating Performance Points) framework code reorganization to
     make it more maintainable (Viresh Kumar).

   - Intel Broxton support for the RAPL (Running Average Power Limits)
     power capping driver (Amy Wiles).

   - Assorted power management code fixes and cleanups (Dan Carpenter,
     Geert Uytterhoeven, Geliang Tang, Luis de Bethencourt, Rasmus
     Villemoes)"

* tag 'pm+acpi-4.4-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (108 commits)
  cpufreq: postfix policy directory with the first CPU in related_cpus
  cpufreq: create cpu/cpufreq/policyX directories
  cpufreq: remove cpufreq_sysfs_{create|remove}_file()
  cpufreq: create cpu/cpufreq at boot time
  cpufreq: Use cpumask_copy instead of cpumask_or to copy a mask
  cpufreq: ondemand: Drop unnecessary locks from update_sampling_rate()
  PM / Domains: Merge measurements for PM QoS device latencies
  PM / Domains: Don't measure ->start|stop() latency in system PM callbacks
  PM / clk: Fix broken build due to non-matching code and header #ifdefs
  ACPI / Documentation: add copy_dsdt to ACPI format options
  ACPI / sysfs: correctly check failing memory allocation
  ACPI / video: Add a quirk to force native backlight on Lenovo IdeaPad S405
  ACPI / CPPC: Fix potential memory leak
  ACPI / CPPC: signedness bug in register_pcc_channel()
  ACPI / PAD: power_saving_thread() is not freezable
  ACPI / PM: Fix incorrect wakeup IRQ setting during suspend-to-idle
  ACPI: Using correct irq when waiting for events
  ACPI: Use correct IRQ when uninstalling ACPI interrupt handler
  cpuidle: mvebu: disable the bind/unbind attributes and use builtin_platform_driver
  cpuidle: mvebu: clean up multiple platform drivers
  ...
2015-11-04 18:10:13 -08:00
Rafael J. Wysocki ab736d7dc1 Merge branch 'device-properties'
* device-properties:
  ACPI / property: Fix subnode lookup scope for data-only subnodes
  acpi-dma: Add support for "dma-names" device property
  device property: Add fwnode_property_match_string()
  ACPI / property: Extend device_get_next_child_node() to data-only nodes
  ACPI / gpio: Split acpi_get_gpiod_by_index()
  ACPI / property: Extend fwnode_property_* to data-only subnodes
  ACPI / property: Expose data-only subnodes via sysfs
  ACPI / property: Add support for data-only subnodes
  ACPI / property: Add routine for extraction of _DSD properties
2015-10-25 22:51:48 +01:00
Laurent Pinchart 90b665f627 gpiolib: Add and use OF_GPIO_SINGLE_ENDED flag
The flag matches the DT GPIO_SINGLE_ENDED flag and allows drivers to
parse and use the DT flag to handle single-ended (open-drain or
open-source) GPIOs.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-16 22:49:26 +02:00
Laurent Pinchart 923b93e451 gpiolib: Split GPIO flags parsing and GPIO configuration
When requesting a GPIO through the legacy or the gpiod_* API the
gpiochip request operation is first called and then the GPIO flags are
parsed and the GPIO is configured. This prevents the gpiochip from
rejecting the request if the flags are not supported by the device.

To fix this split the parse-and-configure operation in two and parse
flags before requesting the GPIO.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-16 22:46:46 +02:00
Jonas Gorski c771c2f484 gpiolib: provide generic request/free implementations
Provide generic request/free implementations that pinctrl aware gpio
drivers can use instead of open coding if they use a 1:1 pin to gpio
signal mapping.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-16 22:11:16 +02:00
Dirk Behme 48b5953ed8 gpio: gpiolib: don't compare an unsigned for >= 0
The parameter offset is an unsigned, so it makes no sense to compare
it for >= 0. Fix the compiler warning regarding this by removing this
comparison.

As the macro GPIO_OFFSET_VALID is only used at this single place, simplify
the code by dropping the macro completely and dropping the invert, too.

No functional change.

Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02 04:19:35 -07:00
Linus Walleij f881bab038 gpio: keep the GPIO line names internal
This refactors the changes to the GPIO line naming mechanism to
not have so widespread effects, instead we conclude the patch series
by having created a name attribute in the GPIO descriptor, that need
not be globally unique, and it will be initialized from the old
.names array in struct gpio_chip if it exists, then used in the legacy
sysfs code like the array was used previously.

The associated changes to name lines from the device tree are
controversial and need to stand alone from this. Resulting changes:

1. Remove the export and the header for the gpio_name_to_desc() as so
far the only use is inside gpiolib.c. Staticize gpio_name_to_desc()
and move it above the only function using it.

2. Only print a warning if there are two GPIO lines with the same name.
The reason is to preserve current behaviour: before the previous
changes to the naming mechanism this would not reject probing the
driver, instead the error would occur when trying to export the line
in sysfs, so restore this behaviour, but print a friendly warning
if names collide.

Cc: Johan Hovold <johan@kernel.org>
Cc: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-24 10:48:53 -07:00
Markus Pargmann ced433e2a4 gpiolib: Add gpio name information to /sys/kernel/debug/gpio
Add some information about gpio names to the debugfs gpio file. name and
label of a GPIO are then displayed next to each other. This way it is
easy to see what the real name of GPIO is and what the driver requested
it for.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
[Dropped unsolicited sysfs ABI patch hunk]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-24 10:48:53 -07:00
Markus Pargmann 5f3ca7329b gpiolib: Use GPIO name from names array for gpio descriptor
This patch adds GPIO names to the GPIO descriptors when initializing the
gpiochip. It also introduces a check whether any of the new names will
conflict with an existing GPIO name.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-24 10:48:52 -07:00
Markus Pargmann c0017ed719 gpio: Introduce gpio descriptor 'name'
The latest gpio hogging mechanism assigns each gpio a 'line-name' in the
devicetree. The 'name' field is different from the 'label' field.
'label' is only used for requested GPIOs to describe its current use by
driver or userspace.

The 'name' field describes the GPIO itself, not the use. This is most
likely identical to the label in the schematic on the GPIO line and
should help to find this particular GPIO.

This is equivalent to the gpiochip->names array. However names should be
stored in the GPIO descriptor. We will use gpiochip->names in the future
only as initializer for the GPIO descriptors for drivers that assign
GPIO names hardcoded. All other GPIO names will be parsed from DT and
directly assigned to the GPIO descriptor.

This patch adds a helper function to find gpio descriptors by name
instead of gpio number.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-24 10:48:51 -07:00
Rafael J. Wysocki 504a337499 ACPI / property: Extend device_get_next_child_node() to data-only nodes
Make device_get_next_child_node() work with ACPI data-only subnodes
introduced previously.

Namely, replace acpi_get_next_child() with acpi_get_next_subnode()
that can handle (and return) child device objects as well as child
data-only subnodes of the given device and modify the ACPI part
of the GPIO subsystem to handle data-only subnodes returned by it.

To that end, introduce acpi_node_get_gpiod() taking a struct
fwnode_handle pointer as the first argument.  That argument may
point to an ACPI device object as well as to a data-only subnode
and the function should do the right thing (ie. look for the matching
GPIO descriptor correctly) in either case.

Next, modify fwnode_get_named_gpiod() to use acpi_node_get_gpiod()
instead of acpi_get_gpiod_by_index() which automatically causes
devm_get_gpiod_from_child() to work with ACPI data-only subnodes
that may be returned by device_get_next_child_node() which in turn
is required by the users of that function (the gpio_keys_polled
and gpio-leds drivers).

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-15 01:47:34 +02:00
Rafael J. Wysocki 3a7a2ab839 ACPI / property: Extend fwnode_property_* to data-only subnodes
Modify is_acpi_node() to return "true" for ACPI data-only subnodes as
well as for ACPI device objects and change the name of to_acpi_node()
to to_acpi_device_node() so it is clear that it covers ACPI device
objects only.  Accordingly, introduce to_acpi_data_node() to cover
data-only subnodes in an analogous way.

With that, make the fwnode_property_* family of functions work with
ACPI data-only subnodes introduced previously.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2015-09-15 01:47:34 +02:00
Bjorn Andersson e20538b82f gpio: Propagate errors from chip->get()
It's possible to have gpio chips hanging off unreliable remote buses
where the get() operation will fail to acquire a readout of the current
gpio state. Propagate these errors to the consumer so that they can
act on, retry or ignore these failing reads, instead of treating them as
the line being held high.

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-14 09:12:03 +02:00
Linus Torvalds f377ea88b8 Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
 "This is the main pull request for the drm for 4.3.  Nouveau is
  probably the biggest amount of changes in here, since it missed 4.2.
  Highlights below, along with the usual bunch of fixes.

  All stuff outside drm should have applicable acks.

  Highlights:

   - new drivers:
        freescale dcu kms driver

   - core:
        more atomic fixes
        disable some dri1 interfaces on kms drivers
        drop fb panic handling, this was just getting more broken, as more locking was required.
        new core fbdev Kconfig support - instead of each driver enable/disabling it
        struct_mutex cleanups

   - panel:
        more new panels
        cleanup Kconfig

   - i915:
        Skylake support enabled by default
        legacy modesetting using atomic infrastructure
        Skylake fixes
        GEN9 workarounds

   - amdgpu:
        Fiji support
        CGS support for amdgpu
        Initial GPU scheduler - off by default
        Lots of bug fixes and optimisations.

   - radeon:
        DP fixes
        misc fixes

   - amdkfd:
        Add Carrizo support for amdkfd using amdgpu.

   - nouveau:
        long pending cleanup to complete driver,
        fully bisectable which makes it larger,
        perfmon work
        more reclocking improvements
        maxwell displayport fixes

   - vmwgfx:
        new DX device support, supports OpenGL 3.3
        screen targets support

   - mgag200:
        G200eW support
        G200e new revision support

   - msm:
        dragonboard 410c support, msm8x94 support, msm8x74v1 support
        yuv format support
        dma plane support
        mdp5 rotation
        initial hdcp

   - sti:
        atomic support

   - exynos:
        lots of cleanups
        atomic modesetting/pageflipping support
        render node support

   - tegra:
        tegra210 support (dc, dsi, dp/hdmi)
        dpms with atomic modesetting support

   - atmel:
        support for 3 more atmel SoCs
        new input formats, PRIME support.

   - dwhdmi:
        preparing to add audio support

   - rockchip:
        yuv plane support"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1369 commits)
  drm/amdgpu: rename gmc_v8_0_init_compute_vmid
  drm/amdgpu: fix vce3 instance handling
  drm/amdgpu: remove ib test for the second VCE Ring
  drm/amdgpu: properly enable VM fault interrupts
  drm/amdgpu: fix warning in scheduler
  drm/amdgpu: fix buffer placement under memory pressure
  drm/amdgpu/cz: fix cz_dpm_update_low_memory_pstate logic
  drm/amdgpu: fix typo in dce11 watermark setup
  drm/amdgpu: fix typo in dce10 watermark setup
  drm/amdgpu: use top down allocation for non-CPU accessible vram
  drm/amdgpu: be explicit about cpu vram access for driver BOs (v2)
  drm/amdgpu: set MEC doorbell range for Fiji
  drm/amdgpu: implement burst NOP for SDMA
  drm/amdgpu: add insert_nop ring func and default implementation
  drm/amdgpu: add amdgpu_get_sdma_instance helper function
  drm/amdgpu: add AMDGPU_MAX_SDMA_INSTANCES
  drm/amdgpu: add burst_nop flag for sdma
  drm/amdgpu: add count field for the SDMA NOP packet v2
  drm/amdgpu: use PT for VM sync on unmap
  drm/amdgpu: make wait_event uninterruptible in push_job
  ...
2015-09-04 15:49:32 -07:00
Grygorii Strashko a0a8bcf467 gpiolib: irqchip: use different lockdep class for each gpio irqchip
Since IRQ chip helpers were introduced drivers lose ability to
register separate lockdep classes for each registered GPIO IRQ
chip and the gpiolib now is using shared lockdep class for
all GPIO IRQ chips (gpiochip_irq_lock_class).
As result, lockdep will produce warning when there are min two
stacked GPIO chips and all of them are interrupt controllers.

HW configuration which generates lockdep warning (TI dra7-evm):

[SOC GPIO bankA.gpioX]
  <- irq - [pcf875x.gpioY]
            <- irq - DevZ.enable_irq_wake(pcf_gpioY_irq);
The issue was reported in [1] and discussed [2].

=============================================
[ INFO: possible recursive locking detected ]
4.2.0-rc6-00013-g5d050ed-dirty #55 Not tainted
---------------------------------------------
sh/63 is trying to acquire lock:
 (class){......}, at: [<c009b91c>] __irq_get_desc_lock+0x50/0x94

but task is already holding lock:
 (class){......}, at: [<c009b91c>] __irq_get_desc_lock+0x50/0x94

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(class);
  lock(class);

 *** DEADLOCK ***

 May be due to missing lock nesting notation

7 locks held by sh/63:
 #0:  (sb_writers#4){.+.+.+}, at: [<c016bbb8>] vfs_write+0x13c/0x164
 #1:  (&of->mutex){+.+.+.}, at: [<c01debf4>] kernfs_fop_write+0x4c/0x1a0
 #2:  (s_active#36){.+.+.+}, at: [<c01debfc>] kernfs_fop_write+0x54/0x1a0
 #3:  (pm_mutex){+.+.+.}, at: [<c009758c>] pm_suspend+0xec/0x4c4
 #4:  (&dev->mutex){......}, at: [<c03f77f8>] __device_suspend+0xd4/0x398
 #5:  (&gpio->lock){+.+.+.}, at: [<c009b940>] __irq_get_desc_lock+0x74/0x94
 #6:  (class){......}, at: [<c009b91c>] __irq_get_desc_lock+0x50/0x94

stack backtrace:
CPU: 0 PID: 63 Comm: sh Not tainted 4.2.0-rc6-00013-g5d050ed-dirty #55
Hardware name: Generic DRA74X (Flattened Device Tree)
[<c0016e24>] (unwind_backtrace) from [<c0013338>] (show_stack+0x10/0x14)
[<c0013338>] (show_stack) from [<c05f6b24>] (dump_stack+0x84/0x9c)
[<c05f6b24>] (dump_stack) from [<c00903f4>] (__lock_acquire+0x19c0/0x1e20)
[<c00903f4>] (__lock_acquire) from [<c0091098>] (lock_acquire+0xa8/0x128)
[<c0091098>] (lock_acquire) from [<c05fd61c>] (_raw_spin_lock_irqsave+0x38/0x4c)
[<c05fd61c>] (_raw_spin_lock_irqsave) from [<c009b91c>] (__irq_get_desc_lock+0x50/0x94)
[<c009b91c>] (__irq_get_desc_lock) from [<c009c4f4>] (irq_set_irq_wake+0x20/0xfc)
[<c009c4f4>] (irq_set_irq_wake) from [<c0393ac4>] (pcf857x_irq_set_wake+0x24/0x54)
[<c0393ac4>] (pcf857x_irq_set_wake) from [<c009c560>] (irq_set_irq_wake+0x8c/0xfc)
[<c009c560>] (irq_set_irq_wake) from [<c04a02ac>] (gpio_keys_suspend+0x70/0xd4)
[<c04a02ac>] (gpio_keys_suspend) from [<c03f6a00>] (dpm_run_callback+0x50/0x124)
[<c03f6a00>] (dpm_run_callback) from [<c03f7830>] (__device_suspend+0x10c/0x398)
[<c03f7830>] (__device_suspend) from [<c03f90f0>] (dpm_suspend+0x134/0x2f4)
[<c03f90f0>] (dpm_suspend) from [<c0096e20>] (suspend_devices_and_enter+0xa8/0x728)
[<c0096e20>] (suspend_devices_and_enter) from [<c00977cc>] (pm_suspend+0x32c/0x4c4)
[<c00977cc>] (pm_suspend) from [<c0096060>] (state_store+0x64/0xb8)
[<c0096060>] (state_store) from [<c01dec64>] (kernfs_fop_write+0xbc/0x1a0)
[<c01dec64>] (kernfs_fop_write) from [<c016b280>] (__vfs_write+0x20/0xd8)
[<c016b280>] (__vfs_write) from [<c016bb0c>] (vfs_write+0x90/0x164)
[<c016bb0c>] (vfs_write) from [<c016c330>] (SyS_write+0x44/0x9c)
[<c016c330>] (SyS_write) from [<c000f500>] (ret_fast_syscall+0x0/0x54)

Lets fix it by using separate lockdep class for each registered GPIO
IRQ Chip. This is done by wrapping gpiochip_irqchip_add call into macros.

The implementation of this patch inspired by solution done by Nicolas
Boichat for regmap [3]

[1] http://www.spinics.net/lists/linux-gpio/msg05844.html
[2] http://www.spinics.net/lists/linux-gpio/msg06021.html
[3] http://www.spinics.net/lists/arm-kernel/msg429834.html

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roger Quadros <rogerq@ti.com>
Reported-by: Roger Quadros <rogerq@ti.com>
Tested-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-17 15:32:03 +02:00
Rabin Vincent 8b67a1f0ad gpio: don't override irq_*_resources() callbacks
If the driver has specified its own irq_{request/release}_resources()
functions, don't override them.  The gpio-etraxfs driver will use this.

Signed-off-by: Rabin Vincent <rabin@rab.in>
[Added a small comment blurb]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-03 10:52:02 +02:00
Tomeu Vizoso 28355f8196 gpio: defer probe if pinctrl cannot be found
When an OF node has a pin range for its GPIOs, return -EPROBE_DEFER if
the pin controller isn't available.

Otherwise, the GPIO range wouldn't be set at all unless the pin
controller probed always before the GPIO chip.

With this change, the probe of the GPIO chip will be deferred and will
be retried at a later point, hopefully once the pin controller has been
registered and probed already.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-28 13:55:36 +02:00
Rob Herring 23393d49fb gpio: kill off set_irq_flags usage
set_irq_flags is ARM specific with custom flags which have genirq
equivalents. Convert drivers to use the genirq interfaces directly, so we
can kill off set_irq_flags. The translation of flags is as follows:

IRQF_VALID -> !IRQ_NOREQUEST
IRQF_PROBE -> !IRQ_NOPROBE
IRQF_NOAUTOEN -> IRQ_NOAUTOEN

For IRQs managed by an irqdomain, the irqdomain core code handles clearing
and setting IRQ_NOREQUEST already, so there is no need to do this in
.map() functions and we can simply remove the set_irq_flags calls. Some
users also modify IRQ_NOPROBE and this has been maintained although it
is not clear that is really needed as most platforms don't use probing.
There appears to be a great deal of blind copy and paste of this code.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: linux-gpio@vger.kernel.org
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-28 09:45:39 +02:00
Masahiro Yamada d1aceb80c6 gpio: remove unneeded initializer in gpiochip_add_to_list()
This variable is used as an iterator and initialized in the
list_for_each() loop.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-27 14:40:33 +02:00
Shobhit Kumar be9015abb8 gpiolib: Add support for removing registered consumer lookup table
In case we unload and load a driver module again that is registering a
lookup table, without this it will result in multiple entries. Provide
an option to remove the lookup table on driver unload

Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-21 09:21:40 +02:00
Linus Walleij bcae888039 Merge branch 'queue/irq/gpio' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into devel 2015-07-17 14:45:31 +02:00
Linus Walleij 2563606ce4 The last patch in this series makes the flags parameter for the various
gpiod_get* functions mandatory and so allows to remove an ugly cpp hack
 introduced in commit 39b2bbe3d7 (gpio: add flags argument to gpiod_get*()
 functions) for v3.17-rc1.
 
 The other nine commits fix the last remaining users of these functions that
 don't pass flags yet. (Only etraxfs-uart wasn't fixed; this driver's use of the
 gpiod functions needs fixing anyhow.)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCgAGBQJVmj+OAAoJEMH8FHityuwJHGcH/A5bSLcdaFCMcrYceYD/odzR
 X/mer/CcW/uWG0sUha2pZjT172szSrm0/Bk+SaY5Ub0c6ssCpKRGhtqZNVWWz44V
 duRQGkYEFODHSed1XnKQyKwr6nLyhjmj8RuP5GokjcsBZyl4onj+NHgmpH5aQBYC
 4NyFpIXcSS4jCwj4nsZu4Y2xLAgu/t5oVzqDheqTyZ9imgaR8hbyminKhN+wFfrI
 FKukShQ5AQPVs7pGEqeY0wgJp+keOIYLukLwvgZw+S7MxixXaPiSK1Ez9DPY9CFo
 f+NkDV6GIe4OAOGFsL9dCxR0sO6mF7C5PpYuDUBtISi3JHNAvW+Ri7FKPeSDikA=
 =ixJj
 -----END PGP SIGNATURE-----

Merge tag 'gpiod-flags-for-4.3' of git://git.pengutronix.de/git/ukl/linux into devel

The last patch in this series makes the flags parameter for the various
gpiod_get* functions mandatory and so allows to remove an ugly cpp hack
introduced in commit 39b2bbe3d7 (gpio: add flags argument to gpiod_get*()
functions) for v3.17-rc1.

The other nine commits fix the last remaining users of these functions that
don't pass flags yet. (Only etraxfs-uart wasn't fixed; this driver's use of the
gpiod functions needs fixing anyhow.)
2015-07-17 13:44:15 +02:00
Grygorii Strashko 3726960edc gpiolib: assign chip owner to dev->driver->owner if not set
Assign GPIO chip owner field to chip->dev->driver->owner if it was not
configured by GPIO driver.

Cc: Johan Hovold <johan@kernel.org>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16 13:21:08 +02:00
Grygorii Strashko 5b76e79c77 gpiolib: irqchip: prevent driver unloading if gpio is used as irq only
Now nothing prevents GPIO driver from being unloaded if its gpios
were requested as GPIO IRQs only (without calling gpio_request()).

Hence, add calls of try_module_get()/module_put() into
gpiochip_irq_reqres/relres() to track such scenario properly.

Cc: Johan Hovold <johan@kernel.org>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16 13:19:22 +02:00
Tomeu Vizoso d32651f687 gpiolib: Fix docs for gpiochip_add_pingroup_range
gpiochip_add_pingroup_range() has a pctldev argument, not pinctrl.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16 00:11:02 +02:00
Thomas Gleixner f7f877533c gpiolib: Consolidate chained IRQ handler install/remove
Chained irq handlers usually set up handler data as well. We now have
a function to set both under irq_desc->lock. Replace the two calls
with one.

Search and conversion was done with coccinelle:

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: linux-gpio@vger.kernel.org
2015-07-14 12:12:19 +02:00
Uwe Kleine-König b17d1bf16c gpio: make flags mandatory for gpiod_get functions
Now that all[1] users of the gpiod_get functions are converted to make
use of the up to now optional flags parameter, make it mandatory which
allows to remove some cpp magic.

[1] all but etraxfs-uart which is broken anyhow and I'm allowed to
    ignore it by Jesper Nilsson :-)

Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2015-07-06 10:39:24 +02:00
Rafael J. Wysocki 132c242d95 Merge branches 'acpi-video', 'device-properties', 'pm-sleep' and 'pm-cpuidle'
* acpi-video:
  ACPI / video: Inline acpi_video_set_dmi_backlight_type

* device-properties:
  ACPI / OF: Rename of_node() and acpi_node() to to_of_node() and to_acpi_node()

* pm-sleep:
  PM / sleep: Increase default DPM watchdog timeout to 60
  PM / hibernate: re-enable nonboot cpus on disable_nonboot_cpus() failure

* pm-cpuidle:
  tick/idle/powerpc: Do not register idle states with CPUIDLE_FLAG_TIMER_STOP set in periodic mode
2015-06-26 03:30:37 +02:00
Alexander Sverdlin c181fb3e72 ACPI / OF: Rename of_node() and acpi_node() to to_of_node() and to_acpi_node()
Commit 8a0662d9 introduced of_node and acpi_node symbols in global namespace
but there were already ~63 of_node local variables or function parameters
(no single acpi_node though, but anyway).

After debugging undefined but used of_node local varible (which turned out
to reference static function of_node() instead) it became clear that the names
for the functions are too short and too generic for global scope.

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-24 20:03:10 +02:00
Linus Torvalds 10b4b096d0 This is the big bulk of GPIO changes queued for the v4.2
kernel series:
 
 - A big set of cleanups to the aged sysfs interface from
   Johan Hovold. To get these in, v4.1-rc3 was merged into
   the tree as the first patch in that series had to go
   into stable. This makes the locking much more fine-grained
   (get rid of the "big GPIO lock(s)" and store states in the
   GPIO descriptors.
 
 - Rename gpiod_[g|s]et_array() to gpiod_[g|s]et_array_value()
   to avoid confusions.
 
 - New drivers for:
   - NXP LPC18xx (currently LPC1850)
   - NetLogic XLP
   - Broadcom STB SoC's
   - Axis ETRAXFS
   - Zynq Ultrascale+ (subdriver)
 
 - ACPI:
   - Make it possible to retrieve GpioInt resources from
     a GPIO device using acpi_dev_gpio_irq_get()
   - Merge some dependent I2C changes exploiting this.
   - Support the ARM X-Gene GPIO standby driver.
 
 - Make it possible for the generic GPIO driver to read
   back the value set registers to reflect current
   status.
 
 - Loads of OMAP IRQ handling fixes.
 
 - Incremental improvements to Kona, max732x, OMAP, MXC, RCAR,
   PCA953x, STP-XWAY, PCF857x, Crystalcove, TB10x.
 
 - Janitorial (contification, checkpatch cleanups)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVh76DAAoJEEEQszewGV1zYFsP/AnyCHs4M67k5Eegxtiwoomc
 OTqkVtOcob9kfqMkbZ1dsjZe2ZYIDiyWeQ1xuV+dD9nx/iAu6inUxb0dXhxKXonr
 +7mQglg32+zWTepLOJosoftoIqOb06lsMfgjL+tJcY5Od7/rewpdEplfEcjmq1O0
 0OdaV2FCXIhHDt52iYHT4tYI1GCky9K4Au9NlPCbKAsGneb3fQahF9o3JpYXl1Oq
 YhIFzUEhM+Zi2IoRsloGdK/eGEHni59IDekhZDf4PnYgA4Dkx2/e1A2Q0h5oT+QI
 j2yfRbI9t1gA5UK7JR/rVJF+5+E8uZ06TZgTo8tU00U4ZvppNgHt8O4KZkJMFBce
 KZzD9rkVVGp0NIDVwmOWjnfwkVVcQzMg/Wf17oM+qdaPO4GHEXNaQaInk1zmwqZq
 tQiTk47zA4rrEaYq3YZjt4xQjl8+ExDlOzFjnfLYAm27gbIl6EFWbX2ON981MC8g
 Nap8MLZINbGTlyDHtuqUlnqN+oXoP8niFuuDixYR+pM1P1bgwIVF+VopRJBFJRJP
 IeR6VdsI9KS99Kg8ICf4ds6WdKAGU3Htj+26udgMhIlOWrkCbvvexIxq9oBkwIB1
 VZofnSZLqnlKvo9Z140atvJWkFti7mqhItVjohmZyvyImLtmQBMq3kSGurXEqWms
 /NGZ0txPd1lMHx5o6ZPK
 =vKYs
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull gpio updates from Linus Walleij:
 "This is the big bulk of GPIO changes queued for the v4.2 kernel
  series:

   - a big set of cleanups to the aged sysfs interface from Johan
     Hovold.  To get these in, v4.1-rc3 was merged into the tree as the
     first patch in that series had to go into stable.  This makes the
     locking much more fine-grained (get rid of the "big GPIO lock(s)"
     and store states in the GPIO descriptors.

   - rename gpiod_[g|s]et_array() to gpiod_[g|s]et_array_value() to
     avoid confusions.

   - New drivers for:
      * NXP LPC18xx (currently LPC1850)
      * NetLogic XLP
      * Broadcom STB SoC's
      * Axis ETRAXFS
      * Zynq Ultrascale+ (subdriver)

   - ACPI:
      * make it possible to retrieve GpioInt resources from a GPIO
        device using acpi_dev_gpio_irq_get()
      * merge some dependent I2C changes exploiting this.
      * support the ARM X-Gene GPIO standby driver.

   - make it possible for the generic GPIO driver to read back the value
     set registers to reflect current status.

   - loads of OMAP IRQ handling fixes.

   - incremental improvements to Kona, max732x, OMAP, MXC, RCAR,
     PCA953x, STP-XWAY, PCF857x, Crystalcove, TB10x.

   - janitorial (constification, checkpatch cleanups)"

* tag 'gpio-v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (71 commits)
  gpio: Fix checkpatch.pl issues
  gpio: pcf857x: handle only enabled irqs
  gpio / ACPI: Return -EPROBE_DEFER if the gpiochip was not found
  GPIO / ACPI: export acpi_gpiochip_request(free)_interrupts for module use
  gpio: improve error reporting on own descriptors
  gpio: promote own request failure to pr_err()
  gpio: Added support to Zynq Ultrascale+ MPSoC
  gpio: add ETRAXFS GPIO driver
  fix documentation after renaming gpiod_set_array to gpiod_set_array_value
  gpio: Add GPIO support for Broadcom STB SoCs
  gpio: xgene: add ACPI support for APM X-Gene GPIO standby driver
  gpio: tb10x: Drop unneeded free_irq() call
  gpio: crystalcove: set IRQCHIP_SKIP_SET_WAKE for the irqchip
  gpio: stp-xway: Use the of_property_read_u32 helper
  gpio: pcf857x: Check for irq_set_irq_wake() failures
  gpio-stp-xway: Fix enabling the highest bit of the PHY LEDs
  gpio: Prevent an integer overflow in the pca953x driver
  gpio: omap: rework omap_gpio_irq_startup to handle current pin state properly
  gpio: omap: rework omap_gpio_request to touch only gpio specific registers
  gpio: omap: rework omap_x_irq_shutdown to touch only irqs specific registers
  ...
2015-06-23 13:34:02 -07:00
Daniel Lockyer 38e003f4b5 gpio: Fix checkpatch.pl issues
This patch fixes some issues given by checkpatch. Fixes include
bracket placement, spacing and indenting.

Signed-off-by: Daniel Lockyer <thisisdaniellockyer@gmail.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-16 11:00:06 +02:00
Linus Walleij a713890d32 gpio: improve error reporting on own descriptors
When requesting own descriptors through hogs, it is useful to
get some details about what's going on if we encounter problems.

Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-10 10:15:46 +02:00
Linus Walleij 8405f20894 gpio: promote own request failure to pr_err()
These error messages are helpful to see that we fail to get
hogs. Promote them to real errors so they appear in the boot
crawl.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-10 10:14:25 +02:00
Rojhalat Ibrahim 3fff99bc4e gpiolib: rename gpiod_set_array to gpiod_set_array_value
There have been concerns that the function names gpiod_set_array() and
gpiod_get_array() might be confusing to users. One might expect
gpiod_get_array() to return array values, while it is actually the array
counterpart of gpiod_get(). To be consistent with the single descriptor API
we could rename gpiod_set_array() to gpiod_set_array_value(). This makes
some function names a bit lengthy: gpiod_set_raw_array_value_cansleep().

Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-01 15:10:09 +02:00
Colin Cronin 20a8a96873 Drivers: gpio: Fix spelling errors
Fixed several spelling errors in gpio-lynxpoint, gpio-pca953x,
gpio-tegra, gpio-zynq, gpiolib-of, gpiolib.

Signed-off-by: Colin Cronin <colinpatrickcronin@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-05-19 16:52:30 +02:00
Dmitry Eremin-Solenikov 25e4fe92a2 gpiolib: cleanup chained handler and data
Clean up chained handler and handler data if they were set by
gpiochip_set_chained_irqchip().

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-05-13 13:02:36 +02:00
Johan Hovold 6d86750ce6 gpio: fix gpio leak in gpiochip_add error path
Make sure to free any hogged gpios on errors in gpiochip_add.

Also move all forward declarations to the top of the file.

Fixes: f625d46017 ("gpio: add GPIO hogging mechanism")
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-05-12 10:56:28 +02:00
Johan Hovold 426577bd88 gpio: sysfs: rename gpiochip registration functions
Rename the gpio-chip export/unexport functions to the more descriptive
names gpiochip_sysfs_register and gpiochip_sysfs_unregister.

Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-05-12 10:46:49 +02:00
Johan Hovold fab28b89a1 gpio: clean up gpiochip_remove
Clean up gpiochip_remove somewhat and only output warning about removing
chip with GPIOs requested once.

Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-05-12 10:46:15 +02:00
Rafael J. Wysocki 4d8440b93c gpio / ACPI: Avoid unnecessary checks in __gpiod_get_index()
If dev is NULL in __gpiod_get_index() and both ACPI and OF are
enabled, it will be checked twice before the code decides to give
up with DT/ACPI lookup, so avoid that.

Also use the observation that ACPI_COMPANION() is much more efficient
than ACPI_HANDLE(), because the latter uses the former and carries out
a check and a pointer dereference on top of it, so replace the
ACPI_HANDLE() check with an ACPI_COMPANION() one which does not
require the additional IS_ENABLED(CONFIG_ACPI) check too.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-19 09:46:04 +01:00
Rojhalat Ibrahim 6685852732 gpiolib: add gpiod_get_array and gpiod_put_array functions
Introduce new functions for conveniently obtaining and disposing of
an entire array of GPIOs with one function call.

ACPI parts tested by Mika Westerberg, DT parts tested by Rojhalat
Ibrahim.

Change log:
v5: move the ACPI functions to gpiolib-acpi.c
v4: - use shorter names for members of struct gpio_descs
    - rename lut_gpio_count to platform_gpio_count for clarity
    - add check for successful memory allocation
    - use ERR_CAST()
v3: - rebase on current linux-gpio devel branch
    - fix ACPI GPIO counting
    - allow for zero-sized arrays
    - make the flags argument mandatory for the new functions
    - clarify documentation
v2: change interface

Suggested-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Rojhalat Ibrahim <imr@rtschenk.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-05 09:52:28 +01:00
Rojhalat Ibrahim 7f2e553a71 gpiolib: define gpio suffixes globally
Avoid multiple identical definitions of the gpio suffix strings by putting
them into a global constant array.

Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-05 09:48:51 +01:00
Benoit Parrot f625d46017 gpio: add GPIO hogging mechanism
Based on Boris Brezillion's work this is a reworked patch
of his initial GPIO hogging mechanism.
This patch provides a way to initially configure specific GPIO
when the GPIO controller is probed.

The actual DT scanning to collect the GPIO specific data is performed
as part of gpiochip_add().

The purpose of this is to allow specific GPIOs to be configured
without any driver specific code.
This is particularly useful because board design are getting
increasingly complex and given SoC pins can now have more
than 10 mux values, a lot of connections are now dependent on
external IO muxes to switch various modes.

Specific drivers should not necessarily need to be aware of
what accounts to a specific board implementation. This board level
"description" should be best kept as part of the dts file.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-04 11:09:00 +01:00
Linus Torvalds a1df7efeda This is the GPIO bulk changes for the v3.20 series:
- GPIOLIB core changes:
   - Create and use of_mm_gpiochip_remove() for removing
     memory-mapped OF GPIO chips
   - GPIO MMIO library suppports bgpio_set_multiple for
     switching several lines at once, a feature merged in
     the last cycle.
 - New drivers:
   - New driver for the APM X-gene standby GPIO controller
   - New driver for the Fujitsu MB86S7x GPIO controller
 - Cleanups:
   - Moved rcar driver to use gpiolib irqchip
   - Moxart converted to the GPIO MMIO library
   - GE driver converted to GPIO MMIO library
   - Move sx150x to irqdomain
   - Move max732x to irqdomain
   - Move vx855 to use managed resources
   - Move dwapb to use managed resources
   - Clean tc3589x from platform data
   - Clean stmpe driver to use device tree only probe
 - New subtypes:
   - sx1506 support in the sx150x driver
   - Quark 1000 SoC support in the SCH driver
   - Support X86 in the Xilinx driver
   - Support PXA1928 in the PXA driver
 - Extended drivers:
   - max732x supports device tree probe
   - sx150x supports device tree probe
 - Various minor cleanups and bug fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU2W1HAAoJEEEQszewGV1zuRkQAKBukQwx46zQuFH8oalSuxmy
 H2/ESMnDmRlBI0zX+dAGDg4HlkO9VwIrdcyzMMe7uO8EFUu9d4/mu2E1f8cY2mxu
 kwUSntVaYGVPVj/Vok3kzq1wW/pUQ9E2iMbNeDVZJH/cqEvylPPa2LZ3hZVri57J
 orJzaYtZWf640y3McGTUDwIQokgxxdMMyWfm26P1iZkByjofUaYRHS1NIxhKVSVC
 Y6uA/Ivvh56ezlPQykc7m6YEjoUS91AMllJca1A3KF3+qvQ3Hnc+i9mB7hAQbJ8L
 6Iv2qCD4TgtWT5YXgP0eZsfSV/19kvlVlGX7QQT6o7uIFOLVNOmX9FJAc4n3SGNI
 HbxsDdlF9XHVFh0XyKcBQfg0uUmRWUDQ/LsXn9KL6Yrpyx3QZGH/PTYl/XoCj1IO
 IL6Bw51FCBXvCvLP5alXMouosAxrc19YpljcAuAMmjVTXe6RoULOZJs+lhTHMhvj
 S6FWr6l0XDr4yKb0SXTOGI4hvRJvL8SWnIt5ezZrNrTKLsklL3Bi/o3BoKzzxmqS
 6l/rxvcVUov455IrfqJ0ZEM6ZxC9/cvGec0RFyglopNSlKeTQsgWRNa6Pw2xZVk8
 orT+G3L4jZ1+0hcjcSwfvHng5Nv6DuhIfUNPbLF/ZzmJcBPqGc/DuhGkFqOrBaXg
 ey7Lua6+l+8zcDtugRRG
 =yWrB
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO changes from Linus Walleij:
 "This is the GPIO bulk changes for the v3.20 series:

  GPIOLIB core changes:
   - Create and use of_mm_gpiochip_remove() for removing memory-mapped
     OF GPIO chips
   - GPIO MMIO library suppports bgpio_set_multiple for switching
     several lines at once, a feature merged in the last cycle.

  New drivers:
   - New driver for the APM X-gene standby GPIO controller
   - New driver for the Fujitsu MB86S7x GPIO controller

  Cleanups:
   - Moved rcar driver to use gpiolib irqchip
   - Moxart converted to the GPIO MMIO library
   - GE driver converted to GPIO MMIO library
   - Move sx150x to irqdomain
   - Move max732x to irqdomain
   - Move vx855 to use managed resources
   - Move dwapb to use managed resources
   - Clean tc3589x from platform data
   - Clean stmpe driver to use device tree only probe

  New subtypes:
   - sx1506 support in the sx150x driver
   - Quark 1000 SoC support in the SCH driver
   - Support X86 in the Xilinx driver
   - Support PXA1928 in the PXA driver

  Extended drivers:
   - max732x supports device tree probe
   - sx150x supports device tree probe

  Various minor cleanups and bug fixes"

* tag 'gpio-v3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (61 commits)
  gpio: kconfig: replace PPC_OF with PPC
  gpio: pxa: add PXA1928 gpio type support
  dt/bindings: gpio: add compatible string for marvell,pxa1928-gpio
  gpio: pxa: remove mach IRQ includes
  gpio: max732x: use an inline function for container cast
  gpio: use sizeof() instead of hardcoded values
  gpio: max732x: add set_multiple function
  gpio: sch: Consolidate similar algorithms
  gpio: tz1090-pdc: Use resource_size to fix off-by-one resource size calculation
  gpio: ge: Convert to use devm_kstrdup
  gpio: correctly use const char * const
  gpio: sx150x: fixup OF support
  gpio: mpc8xxx: Use of_mm_gpiochip_remove
  gpio: Add Fujitsu MB86S7x GPIO driver
  gpio: mpc8xxx: Convert to platform device interface.
  gpio: zevio: Use of_mm_gpiochip_remove
  gpio: gpio-mm-lantiq: Use of_mm_gpiochip_remove
  gpio: gpio-mm-lantiq: Use of_property_read_u32
  gpio: gpio-mm-lantiq: Do not replicate code
  gpio :gpio-mm-lantiq: Use devm_kzalloc
  ...
2015-02-11 11:17:34 -08:00
Olliver Schinagl 9e089246a5 gpio: use sizeof() instead of hardcoded values
gpiolib uses a fixed string for the suffixes and defines it at 32 bytes.
Later in the code snprintf is used with this fixed value of 32. Using
sizeof() is safer in case the size for the suffixes is ever changed.

Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-30 14:43:04 +01:00
Olliver Schinagl ef3b2bd6f3 gpio: correctly use const char * const
On my previous patch I was overly hasty and made the suffixes string
array
const char const *suffixes, instaed of const char * const suffixes. This
patch corrects that

Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-29 10:29:53 +01:00
Olliver Schinagl b9b4d9f2b9 gpio:gpiolib: use static const char const * for a suffixes array
Checkpatch complains, and probably with good reason that we should use
const char const * for the static constant array that never gets
changed.

Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-15 17:23:22 +01:00
Johan Hovold 01cca93a94 gpio: unregister gpiochip device before removing it
Unregister gpiochip device (used to export information through sysfs)
before removing it internally. This way removal will reverse addition.

Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-14 14:27:01 +01:00