A while ago we introduced a dedicated vfs{g,u}id_t type in commit
1e5267cd08 ("mnt_idmapping: add vfs{g,u}id_t"). We already switched
over a good part of the VFS. Ultimately we will remove all legacy
idmapped mount helpers that operate only on k{g,u}id_t in favor of the
new type safe helpers that operate on vfs{g,u}id_t.
Cc: Seth Forshee (Digital Ocean) <sforshee@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Chao Yu <chao@kernel.org>
Cc: linux-f2fs-devel@lists.sourceforge.net
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Wenqing Liu reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=216456
loop5: detected capacity change from 0 to 131072
F2FS-fs (loop5): recover_inode: ino = 6, name = hln, inline = 1
F2FS-fs (loop5): recover_data: ino = 6 (i_size: recover) err = 0
F2FS-fs (loop5): recover_inode: ino = 6, name = hln, inline = 1
F2FS-fs (loop5): recover_data: ino = 6 (i_size: recover) err = 0
F2FS-fs (loop5): recover_inode: ino = 6, name = hln, inline = 1
F2FS-fs (loop5): recover_data: ino = 6 (i_size: recover) err = 0
F2FS-fs (loop5): Bitmap was wrongly set, blk:5634
------------[ cut here ]------------
WARNING: CPU: 3 PID: 1013 at fs/f2fs/segment.c:2198
RIP: 0010:update_sit_entry+0xa55/0x10b0 [f2fs]
Call Trace:
<TASK>
f2fs_do_replace_block+0xa98/0x1890 [f2fs]
f2fs_replace_block+0xeb/0x180 [f2fs]
recover_data+0x1a69/0x6ae0 [f2fs]
f2fs_recover_fsync_data+0x120d/0x1fc0 [f2fs]
f2fs_fill_super+0x4665/0x61e0 [f2fs]
mount_bdev+0x2cf/0x3b0
legacy_get_tree+0xed/0x1d0
vfs_get_tree+0x81/0x2b0
path_mount+0x47e/0x19d0
do_mount+0xce/0xf0
__x64_sys_mount+0x12c/0x1a0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
If we enable CONFIG_F2FS_CHECK_FS config, it will trigger a kernel panic
instead of warning.
The root cause is: in fuzzed image, SIT table is inconsistent with inode
mapping table, result in triggering such warning during SIT table update.
This patch introduces a new flag DATA_GENERIC_ENHANCE_UPDATE, w/ this
flag, data block recovery flow can check destination blkaddr's validation
in SIT table, and skip f2fs_replace_block() to avoid inconsistent status.
Cc: stable@vger.kernel.org
Reported-by: Wenqing Liu <wenqingliu0120@gmail.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Cold files may be fragmented due to SSR, defragment is needed as
sequential reads are dominant scenarios of these files. FI_OPU_WRITE
should override FADVISE_COLD_BIT to avoid defragment fails.
Signed-off-by: Weichao Guo <guoweichao@oppo.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The following scenarios exist.
process A: process B:
->f2fs_drop_extent_tree ->f2fs_update_extent_cache_range
->f2fs_update_extent_tree_range
->write_lock
->set_inode_flag
->is_inode_flag_set
->__free_extent_tree // Shouldn't
// have been
// cleaned up
// here
->write_lock
In this case, the "FI_NO_EXTENT" flag is set between
f2fs_update_extent_tree_range and is_inode_flag_set
by other process. it leads to clearing the whole exten
tree which should not have happened. And we fix it by
move the setting it to the range of write_lock.
Fixes:5f281fab9b9a3 ("f2fs: disable extent_cache for fcollapse/finsert inodes")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It have checked "compressed" at the entry of
f2fs_sanity_check_cluster, just remove the
redundant check for better performance here.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We can use a inner function to init the disk time
of f2fs_inode_info for cleaning redundant code.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This is a BUG_ON issue as follows when running xfstest-generic-503:
WARNING: CPU: 21 PID: 1385 at fs/f2fs/inode.c:762 f2fs_evict_inode+0x847/0xaa0
Modules linked in:
CPU: 21 PID: 1385 Comm: umount Not tainted 5.19.0-rc5+ #73
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/01/2014
Call Trace:
evict+0x129/0x2d0
dispose_list+0x4f/0xb0
evict_inodes+0x204/0x230
generic_shutdown_super+0x5b/0x1e0
kill_block_super+0x29/0x80
kill_f2fs_super+0xe6/0x140
deactivate_locked_super+0x44/0xc0
deactivate_super+0x79/0x90
cleanup_mnt+0x114/0x1a0
__cleanup_mnt+0x16/0x20
task_work_run+0x98/0x100
exit_to_user_mode_prepare+0x3d0/0x3e0
syscall_exit_to_user_mode+0x12/0x30
do_syscall_64+0x42/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Function flow analysis when BUG occurs:
f2fs_fallocate mmap
do_page_fault
pte_spinlock // ---lock_pte
do_wp_page
wp_page_shared
pte_unmap_unlock // unlock_pte
do_page_mkwrite
f2fs_vm_page_mkwrite
down_read(invalidate_lock)
lock_page
if (PageMappedToDisk(page))
goto out;
// set_page_dirty --NOT RUN
out: up_read(invalidate_lock);
finish_mkwrite_fault // unlock_pte
f2fs_collapse_range
down_write(i_mmap_sem)
truncate_pagecache
unmap_mapping_pages
i_mmap_lock_write // down_write(i_mmap_rwsem)
......
zap_pte_range
pte_offset_map_lock // ---lock_pte
set_page_dirty
f2fs_dirty_data_folio
if (!folio_test_dirty(folio)) {
fault_dirty_shared_page
set_page_dirty
f2fs_dirty_data_folio
if (!folio_test_dirty(folio)) {
filemap_dirty_folio
f2fs_update_dirty_folio // ++
}
unlock_page
filemap_dirty_folio
f2fs_update_dirty_folio // page count++
}
pte_unmap_unlock // --unlock_pte
i_mmap_unlock_write // up_write(i_mmap_rwsem)
truncate_inode_pages
up_write(i_mmap_sem)
When race happens between mmap-do_page_fault-wp_page_shared and
fallocate-truncate_pagecache-zap_pte_range, the zap_pte_range calls
function set_page_dirty without page lock. Besides, though
truncate_pagecache has immap and pte lock, wp_page_shared calls
fault_dirty_shared_page without any. In this case, two threads race
in f2fs_dirty_data_folio function. Page is set to dirty only ONCE,
but the count is added TWICE by calling filemap_dirty_folio.
Thus the count of dirty page cannot accord with the real dirty pages.
Following is the solution to in case of race happens without any lock.
Since folio_test_set_dirty in filemap_dirty_folio is atomic, judge return
value will not be at risk of race.
Signed-off-by: Shuqi Zhang <zhangshuqi3@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Just use the defined COMPRESS_MAPPING to get compress cache
mapping instaed of direct accessing name.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Just return tmp_ptr here, it's no need to dereference
checkpoint pointer again.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We should set the 'stat->size' to the real number of snapshots for
snapdirs.
Link: https://tracker.ceph.com/issues/57342
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When unlinking a file the kclient will send a unlink request to MDS
by holding the dentry reference, and then the MDS will return 2 replies,
which are unsafe reply and a deferred safe reply.
After the unsafe reply received the kernel will return and succeed
the unlink request to user space apps.
Only when the safe reply received the dentry's reference will be
released. Or the dentry will only be unhashed from dcache. But when
the open_by_handle_at() begins to open the unlinked files it will
succeed.
The inode->i_count couldn't be used to check whether the inode is
opened or not.
Link: https://tracker.ceph.com/issues/56524
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Luís Henriques <lhenriques@suse.de>
Tested-by: Luís Henriques <lhenriques@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When the client has enough caps to satisfy a setattr locally without
having to talk to the server, we currently do the setattr without
incrementing the change attribute.
Ensure that if the ctime changes locally, then the change attribute
does too.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Prefer using kcalloc(a, b) over kzalloc(a * b) as this improves
semantics since kcalloc is intended for allocating an array of memory.
Signed-off-by: Kenneth Lee <klee33@uw.edu>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
For write when trying to get the Fwb caps we need to keep waiting
on transition from WRBUFFER|WR -> WR to avoid a new WR sync write
from going before a prior buffered writeback happens.
While for read there is no need to wait on transition from
RDCACHE|RD -> RD, and we can just exclude the revoking caps and
force to sync read.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Just fail the request instead sending the request out, or the peer
MDS will crash.
Link: https://tracker.ceph.com/issues/56529
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When new caps comes we need to wake up the waiters and also when
revoking the caps, there also could be new caps comes.
Link: https://tracker.ceph.com/issues/54044
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
xfs_dax_failure_fn is used to scan the filesystem during a memory
failure event to look for memory mappings to revoke. Unfortunately,
if it encounters an rmap record for filesystem metadata, it will
shut down the filesystem and the scan immediately. This means that
we don't complete the mapping revocation scan and instead leave live
mappings to failed memory. Fix the function to defer the shutdown
until after we've finished culling mappings.
While we're at it, add the usual "xfs_" prefix to struct
failure_info, and actually initialize mf_flags.
Fixes: 6f643c57d5 ("xfs: implement ->notify_failure() for XFS")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_dir2_isleaf is used to see if the directory is a single-leaf
form directory instead, as commented right above the function.
Besides getting rid of the broken comment, we rearrange the logic by
converting everything over to standard formatting and conventions,
at the same time, to make it easier to understand and self documenting.
Signed-off-by: Shida Zhang <zhangshida@kylinos.cn>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Take a look at the for-loop in xfs_da_grow_inode_int:
======
for(){
nmap = min(XFS_BMAP_MAX_NMAP, count);
...
error = xfs_bmapi_write(...,&mapp[mapi], &nmap);//(..., $1, $2)
...
mapi += nmap;
}
=====
where $1 stands for the start address of the array,
while $2 is used to indicate the size of the array.
The array $1 will advance by $nmap in each iteration after
the allocation of extents.
But the size $2 still remains unchanged, which is determined by
min(XFS_BMAP_MAX_NMAP, count).
It seems that it has forgotten to trim the mapp array after each
iteration, so change it.
Signed-off-by: Shida Zhang <zhangshida@kylinos.cn>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Make statx() support reporting direct I/O (DIO) alignment information.
This provides a generic interface for userspace programs to determine
whether a file supports DIO, and if so with what alignment restrictions.
Specifically, STATX_DIOALIGN works on block devices, and on regular
files when their containing filesystem has implemented support.
An interface like this has been requested for years, since the
conditions for when DIO is supported in Linux have gotten increasingly
complex over time. Today, DIO support and alignment requirements can be
affected by various filesystem features such as multi-device support,
data journalling, inline data, encryption, verity, compression,
checkpoint disabling, log-structured mode, etc. Further complicating
things, Linux v6.0 relaxed the traditional rule of DIO needing to be
aligned to the block device's logical block size; now user buffers (but
not file offsets) only need to be aligned to the DMA alignment.
The approach of uplifting the XFS specific ioctl XFS_IOC_DIOINFO was
discarded in favor of creating a clean new interface with statx().
For more information, see the individual commits and the man page update
https://lore.kernel.org/r/20220722074229.148925-1-ebiggers@kernel.org.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCYzpV2xQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOKwF1AQDetPX5hyuq0/mwikOywLTTJsoHgGY5
euO+dISqjH/InwD9HAQqfPRkdM1j4ml82BjjkAfrhzZXOOWPKJm0zOhMIQg=
=0Oav
-----END PGP SIGNATURE-----
Merge tag 'statx-dioalign-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull STATX_DIOALIGN support from Eric Biggers:
"Make statx() support reporting direct I/O (DIO) alignment information.
This provides a generic interface for userspace programs to determine
whether a file supports DIO, and if so with what alignment
restrictions. Specifically, STATX_DIOALIGN works on block devices, and
on regular files when their containing filesystem has implemented
support.
An interface like this has been requested for years, since the
conditions for when DIO is supported in Linux have gotten increasingly
complex over time. Today, DIO support and alignment requirements can
be affected by various filesystem features such as multi-device
support, data journalling, inline data, encryption, verity,
compression, checkpoint disabling, log-structured mode, etc.
Further complicating things, Linux v6.0 relaxed the traditional rule
of DIO needing to be aligned to the block device's logical block size;
now user buffers (but not file offsets) only need to be aligned to the
DMA alignment.
The approach of uplifting the XFS specific ioctl XFS_IOC_DIOINFO was
discarded in favor of creating a clean new interface with statx().
For more information, see the individual commits and the man page
update[1]"
Link: https://lore.kernel.org/r/20220722074229.148925-1-ebiggers@kernel.org [1]
* tag 'statx-dioalign-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
xfs: support STATX_DIOALIGN
f2fs: support STATX_DIOALIGN
f2fs: simplify f2fs_force_buffered_io()
f2fs: move f2fs_force_buffered_io() into file.c
ext4: support STATX_DIOALIGN
fscrypt: change fscrypt_dio_supported() to prepare for STATX_DIOALIGN
vfs: support STATX_DIOALIGN on block devices
statx: add direct I/O alignment information
Minor changes to convert uses of kmap() to kmap_local_page().
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCYzpKvRQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK9KSAP9PyrI3kDLBpiG9os3HIZtHyPHgt6OZ
FA978i0UuAxgHAD7BPiIT55oBdOrn6CVy2g8PkwmkcKQx0kvhVQq8Pyz5ww=
=49pm
-----END PGP SIGNATURE-----
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fsverity updates from Eric Biggers:
"Minor changes to convert uses of kmap() to kmap_local_page()"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fs-verity: use kmap_local_page() instead of kmap()
fs-verity: use memcpy_from_page()
This release contains some implementation changes, but no new features:
- Rework the implementation of the fscrypt filesystem-level keyring to
not be as tightly coupled to the keyrings subsystem. This resolves
several issues.
- Eliminate most direct uses of struct request_queue from fs/crypto/,
since struct request_queue is considered to be a block layer
implementation detail.
- Stop using the PG_error flag to track decryption failures. This is a
prerequisite for freeing up PG_error for other uses.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCYzpMMRQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOKxYbAP0VrWjlqonO75gYkIxwX0aTxajoKC3m
awUDAC/feQ910gD6A4WbJivanLngJKgcxfbhN5paalZJEGNOBBrOUB1WLgs=
=CxSh
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fscrypt updates from Eric Biggers:
"This release contains some implementation changes, but no new
features:
- Rework the implementation of the fscrypt filesystem-level keyring
to not be as tightly coupled to the keyrings subsystem. This
resolves several issues.
- Eliminate most direct uses of struct request_queue from fs/crypto/,
since struct request_queue is considered to be a block layer
implementation detail.
- Stop using the PG_error flag to track decryption failures. This is
a prerequisite for freeing up PG_error for other uses"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fscrypt: work on block_devices instead of request_queues
fscrypt: stop holding extra request_queue references
fscrypt: stop using keyrings subsystem for fscrypt_master_key
fscrypt: stop using PG_error to track error status
fscrypt: remove fscrypt_set_test_dummy_encryption()
This set of commits includes:
. Fix a couple races found with a new torture test.
. Improve errors when api functions are used incorrectly.
. Improve tracing for lock requests from user space.
. Fix use after free in recently added tracing code.
. Small internal code cleanups.
-----BEGIN PGP SIGNATURE-----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=sL1G
-----END PGP SIGNATURE-----
Merge tag 'dlm-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
- Fix a couple races found with a new torture test
- Improve errors when api functions are used incorrectly
- Improve tracing for lock requests from user space
- Fix use after free in recently added tracing cod.
- Small internal code cleanups
* tag 'dlm-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
fs: dlm: fix possible use after free if tracing
fs: dlm: const void resource name parameter
fs: dlm: LSFL_CB_DELAY only for kernel lockspaces
fs: dlm: remove DLM_LSFL_FS from uapi
fs: dlm: trace user space callbacks
fs: dlm: change ls_clear_proc_locks to spinlock
fs: dlm: remove dlm_del_ast prototype
fs: dlm: handle rcom in else if branch
fs: dlm: allow lockspaces have zero lvblen
fs: dlm: fix invalid derefence of sb_lvbptr
fs: dlm: handle -EINVAL as log_error()
fs: dlm: use __func__ for function name
fs: dlm: handle -EBUSY first in unlock validation
fs: dlm: handle -EBUSY first in lock arg validation
fs: dlm: fix race between test_bit() and queue_work()
fs: dlm: fix race in lowcomms
This release is mostly bug fixes, clean-ups, and optimizations.
One notable set of fixes addresses a subtle buffer overflow issue
that occurs if a small RPC Call message arrives in an oversized
RPC record. This is only possible on a framed RPC transport such
as TCP.
Because NFSD shares the receive and send buffers in one set of
pages, an oversized RPC record steals pages from the send buffer
that will be used to construct the RPC Reply message. NFSD must
not assume that a full-sized buffer is always available to it;
otherwise, it will walk off the end of the send buffer while
constructing its reply.
In this release, we also introduce the ability for the server to
wait a moment for clients to return delegations before it responds
with NFS4ERR_DELAY. This saves a retransmit and a network round-
trip when a delegation recall is needed. This work will be built
upon in future releases.
The NFS server adds another shrinker to its collection. Because
courtesy clients can linger for quite some time, they might be
freeable when the server host comes under memory pressure. A new
shrinker has been added that releases courtesy client resources
during low memory scenarios.
Lastly, of note: the maximum number of operations per NFSv4
COMPOUND that NFSD can handle is increased from 16 to 50. There
are NFSv4 client implementations that need more than 16 to
successfully perform a mount operation that uses a pathname
with many components.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEKLLlsBKG3yQ88j7+M2qzM29mf5cFAmM66P4ACgkQM2qzM29m
f5fhMg//afS2mp4fgPz4MjoFIqD/Icep8qFEPA8Gy6I1dDGRxd9wNgjoN4JALFdr
NKX1oRVISBvDrOG/C84GbYnXEDlzY8q1HmyPoJA8VAR57hnJXfPZN6CBN//Bx4mU
nISPJeNGY9SMNVhS8916V/yzd41uWDQuD+H+i5mluBTJHONgSzwzc80sQ+eq+yZQ
PV6mlJN6hcm14LCaDOTXF7oY2Wm6dQc2rV87YChJWnc+vdXKnme/LWTMY1ABkePD
g88mSL6w3YDKEuKciWda5/QU1ETp/Q7XTjFGDKEQSnnNsvCLmUKogJTKVa2QqyLY
P1qlrj6XwukqAe414W4amlLL3q4NUFmJZPNWDxdf+qtTrQrBBEFrsKy/bSt27XoD
cTvBWcorMG2riSlYPViVeh8RpyC6qwhttPbvGAmflVF2KEyXpfgc5Pnn0/Xm1Ac9
XKzaCTJlUyRb/2wdqVtQbIpyh3sbhzp8zhv7sWKXgQOEXxKOO3ZAIrQXeL6oFN/b
HlXDty7wKhFRj8IbkZfQ9SvN1saTONwB3clYHbCXTetkw/nnrUgLYcu8NIDBK9ou
wkBcz1++XgVTqjRFwUwagb62cPJnRM6UiROYCVbQp7qcUe4/U+WP9t6dnZlnGZVZ
dtipKlH/LTGKW+d7ysZOqb4hsRza5Kaduz5a7lML7UIGQXmxjM0=
=hE6t
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
"This release is mostly bug fixes, clean-ups, and optimizations.
One notable set of fixes addresses a subtle buffer overflow issue that
occurs if a small RPC Call message arrives in an oversized RPC record.
This is only possible on a framed RPC transport such as TCP.
Because NFSD shares the receive and send buffers in one set of pages,
an oversized RPC record steals pages from the send buffer that will be
used to construct the RPC Reply message. NFSD must not assume that a
full-sized buffer is always available to it; otherwise, it will walk
off the end of the send buffer while constructing its reply.
In this release, we also introduce the ability for the server to wait
a moment for clients to return delegations before it responds with
NFS4ERR_DELAY. This saves a retransmit and a network round- trip when
a delegation recall is needed. This work will be built upon in future
releases.
The NFS server adds another shrinker to its collection. Because
courtesy clients can linger for quite some time, they might be
freeable when the server host comes under memory pressure. A new
shrinker has been added that releases courtesy client resources during
low memory scenarios.
Lastly, of note: the maximum number of operations per NFSv4 COMPOUND
that NFSD can handle is increased from 16 to 50. There are NFSv4
client implementations that need more than 16 to successfully perform
a mount operation that uses a pathname with many components"
* tag 'nfsd-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (53 commits)
nfsd: extra checks when freeing delegation stateids
nfsd: make nfsd4_run_cb a bool return function
nfsd: fix comments about spinlock handling with delegations
nfsd: only fill out return pointer on success in nfsd4_lookup_stateid
NFSD: fix use-after-free on source server when doing inter-server copy
NFSD: Cap rsize_bop result based on send buffer size
NFSD: Rename the fields in copy_stateid_t
nfsd: use DEFINE_SHOW_ATTRIBUTE to define nfsd_file_cache_stats_fops
nfsd: use DEFINE_SHOW_ATTRIBUTE to define nfsd_reply_cache_stats_fops
nfsd: use DEFINE_SHOW_ATTRIBUTE to define client_info_fops
nfsd: use DEFINE_SHOW_ATTRIBUTE to define export_features_fops and supported_enctypes_fops
nfsd: use DEFINE_PROC_SHOW_ATTRIBUTE to define nfsd_proc_ops
NFSD: Pack struct nfsd4_compoundres
NFSD: Remove unused nfsd4_compoundargs::cachetype field
NFSD: Remove "inline" directives on op_rsize_bop helpers
NFSD: Clean up nfs4svc_encode_compoundres()
SUNRPC: Fix typo in xdr_buf_subsegment's kdoc comment
NFSD: Clean up WRITE arg decoders
NFSD: Use xdr_inline_decode() to decode NFSv3 symlinks
NFSD: Refactor common code out of dirlist helpers
...
- Introduce fscache-based domain to share blobs between images;
- Support recording fragments in a special packed inode;
- Support partial-referenced pclusters for global compressed data
deduplication;
- Fix an order >= MAX_ORDER warning due to crafted negative i_size;
- Several cleanups.
-----BEGIN PGP SIGNATURE-----
iIcEABYIAC8WIQThPAmQN9sSA0DVxtI5NzHcH7XmBAUCYzq3FxEceGlhbmdAa2Vy
bmVsLm9yZwAKCRA5NzHcH7XmBJbRAQDab/0DJu7iDktzupazfCibkg8vWzakXIi+
KE0y5O8VaQEAwn9bdPU4cp+raowoMt3z8eGsj4H9ZO9NM8NfPUX0uQQ=
=TNVH
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"In this cycle, for container use cases, fscache-based shared domain is
introduced [1] so that data blobs in the same domain will be storage
deduplicated and it will also be used for page cache sharing later.
Also, a special packed inode is now introduced to record inode
fragments which keep the tail part of files by Yue Hu [2]. You can
keep arbitary length or (at will) the whole file as a fragment and
then fragments can be optionally compressed in the packed inode
together and even deduplicated for smaller image sizes.
In addition to that, global compressed data deduplication by sharing
partial-referenced pclusters is also supported in this cycle.
Summary:
- Introduce fscache-based domain to share blobs between images
- Support recording fragments in a special packed inode
- Support partial-referenced pclusters for global compressed data
deduplication
- Fix an order >= MAX_ORDER warning due to crafted negative i_size
- Several cleanups"
Link: https://lore.kernel.org/r/20220916085940.89392-1-zhujia.zj@bytedance.com [1]
Link: https://lore.kernel.org/r/cover.1663065968.git.huyue2@coolpad.com [2]
* tag 'erofs-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: clean up erofs_iget()
erofs: clean up unnecessary code and comments
erofs: fold in z_erofs_reload_indexes()
erofs: introduce partial-referenced pclusters
erofs: support on-disk compressed fragments data
erofs: support interlaced uncompressed data for compressed files
erofs: clean up .read_folio() and .readahead() in fscache mode
erofs: introduce 'domain_id' mount option
erofs: Support sharing cookies in the same domain
erofs: introduce a pseudo mnt to manage shared cookies
erofs: introduce fscache-based domain
erofs: code clean up for fscache
erofs: use kill_anon_super() to kill super in fscache mode
erofs: fix order >= MAX_ORDER warning due to crafted negative i_size
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYzqjGgAKCRCRxhvAZXjc
ovVFAQCbZXflZk/DGy1CVEWHwJDkMlmN62jCY+3gZP6UPsCeCQEA4uB3Hub7jihO
b2q9yhR+p6G7DHkeNAo2qUu4bI0lDgQ=
=zG6Z
-----END PGP SIGNATURE-----
Merge tag 'fs.vfsuid.fat.v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull fatfs vfsuid conversion from Christian Brauner:
"Last cycle we introduced the new vfs{g,u}id_t types that we had agreed
on. The most important parts of the vfs have been converted but there
are a few more places we need to switch before we can remove the old
helpers completely.
This cycle we converted all filesystems that called idmapped mount
helpers directly. The affected filesystems are f2fs, fat, fuse, ksmbd,
overlayfs, and xfs. We've sent patches for all of them. Looking at
-next f2fs, ksmbd, overlayfs, and xfs have all picked up these patches
and they should land in mainline during the v6.1 merge window.
So all filesystems that have a separate tree should send the vfsuid
conversion themselves. Onle the fat conversion is going through this
generic fs trees because there is no fat tree.
In order to change time settings on an inode fat checks that the
caller either is the owner of the inode or the inode's group is in the
caller's group list. If fat is on an idmapped mount we compare whether
the inode mapped into the mount is equivalent to the caller's fsuid.
If it isn't we compare whether the inode's group mapped into the mount
is in the caller's group list.
We now use the new vfsuid based helpers for that"
* tag 'fs.vfsuid.fat.v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
fat: port to vfs{g,u}id_t and associated helpers
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYzqi8gAKCRCRxhvAZXjc
orKNAQCGKPJ3Kc3LVVnh8qdjm9npP+j9UQAB7jDZi9q7RijIIAD/VYjj+z5XLg4V
k96ibCyir1+4EOF8ihY0WQi40MSWYws=
=S/Wf
-----END PGP SIGNATURE-----
Merge tag 'fs.acl.rework.prep.v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull vfs acl updates from Christian Brauner:
"These are general fixes and preparatory changes related to the ongoing
posix acl rework. The actual rework where we build a type safe posix
acl api wasn't ready for this merge window but we're hopeful for the
next merge window.
General fixes:
- Some filesystems like 9p and cifs have to implement custom posix
acl handlers because they require access to the dentry in order to
set and get posix acls while the set and get inode operations
currently don't. But the ntfs3 filesystem has no such requirement
and thus implemented custom posix acl xattr handlers when it really
didn't have to. So this pr contains patch that just implements set
and get inode operations for ntfs3 and switches it to rely on the
generic posix acl xattr handlers. (We would've appreciated reviews
from the ntfs3 maintainers but we didn't get any. But hey, if we
really broke it we'll fix it. But fstests for ntfs3 said it's
fine.)
- The posix_acl_fix_xattr_common() helper has been adapted so it can
be used by a few more callers and avoiding open-coding the same
checks over and over.
Other than the two general fixes this series introduces a new helper
vfs_set_acl_prepare(). The reason for this helper is so that we can
mitigate one of the source that change {g,u}id values directly in the
uapi struct. With the vfs_set_acl_prepare() helper we can move the
idmapped mount fixup into the generic posix acl set handler.
The advantage of this is that it allows us to remove the
posix_acl_setxattr_idmapped_mnt() helper which so far we had to call
in vfs_setxattr() to account for idmapped mounts. While semantically
correct the problem with this approach was that we had to keep the
value parameter of the generic vfs_setxattr() call as non-const. This
is rectified in this series.
Ultimately, we will get rid of all the extreme kludges and type
unsafety once we have merged the posix api - hopefully during the next
merge window - built solely around get and set inode operations. Which
incidentally will also improve handling of posix acls in security and
especially in integrity modesl. While this will come with temporarily
having two inode operation for posix acls that is nothing compared to
the problems we have right now and so well worth it. We'll end up with
something that we can actually reason about instead of needing to
write novels to explain what's going on"
* tag 'fs.acl.rework.prep.v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
xattr: always us is_posix_acl_xattr() helper
acl: fix the comments of posix_acl_xattr_set
xattr: constify value argument in vfs_setxattr()
ovl: use vfs_set_acl_prepare()
acl: move idmapping handling into posix_acl_xattr_set()
acl: add vfs_set_acl_prepare()
acl: return EOPNOTSUPP in posix_acl_fix_xattr_common()
ntfs3: rework xattr handlers and switch to POSIX ACL VFS helpers
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCYzuCiQAKCRBZ7Krx/gZQ
65z6AQDbHgeZ3vXLyHdxs3VWsUkKWMUV1gb5MmzBs/eGq0K3hAD9FfGsOoT2ow9h
2ics8AGrvMZMHrFOwFAmolXjLW7qQws=
=y0rq
-----END PGP SIGNATURE-----
Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull coredump fix from Al Viro:
"Brown paper bag bug fix for the coredumping fix late in the 6.0
release cycle"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
[brown paperbag] fix coredump breakage
-----BEGIN PGP SIGNATURE-----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=VZl5
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20221003' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull LSM updates from Paul Moore:
"Seven patches for the LSM layer and we've got a mix of trivial and
significant patches. Highlights below, starting with the smaller bits
first so they don't get lost in the discussion of the larger items:
- Remove some redundant NULL pointer checks in the common LSM audit
code.
- Ratelimit the lockdown LSM's access denial messages.
With this change there is a chance that the last visible lockdown
message on the console is outdated/old, but it does help preserve
the initial series of lockdown denials that started the denial
message flood and my gut feeling is that these might be the more
valuable messages.
- Open userfaultfds as readonly instead of read/write.
While this code obviously lives outside the LSM, it does have a
noticeable impact on the LSMs with Ondrej explaining the situation
in the commit description. It is worth noting that this patch
languished on the VFS list for over a year without any comments
(objections or otherwise) so I took the liberty of pulling it into
the LSM tree after giving fair notice. It has been in linux-next
since the end of August without any noticeable problems.
- Add a LSM hook for user namespace creation, with implementations
for both the BPF LSM and SELinux.
Even though the changes are fairly small, this is the bulk of the
diffstat as we are also including BPF LSM selftests for the new
hook.
It's also the most contentious of the changes in this pull request
with Eric Biederman NACK'ing the LSM hook multiple times during its
development and discussion upstream. While I've never taken NACK's
lightly, I'm sending these patches to you because it is my belief
that they are of good quality, satisfy a long-standing need of
users and distros, and are in keeping with the existing nature of
the LSM layer and the Linux Kernel as a whole.
The patches in implement a LSM hook for user namespace creation
that allows for a granular approach, configurable at runtime, which
enables both monitoring and control of user namespaces. The general
consensus has been that this is far preferable to the other
solutions that have been adopted downstream including outright
removal from the kernel, disabling via system wide sysctls, or
various other out-of-tree mechanisms that users have been forced to
adopt since we haven't been able to provide them an upstream
solution for their requests. Eric has been steadfast in his
objections to this LSM hook, explaining that any restrictions on
the user namespace could have significant impact on userspace.
While there is the possibility of impacting userspace, it is
important to note that this solution only impacts userspace when it
is requested based on the runtime configuration supplied by the
distro/admin/user. Frederick (the pathset author), the LSM/security
community, and myself have tried to work with Eric during
development of this patchset to find a mutually acceptable
solution, but Eric's approach and unwillingness to engage in a
meaningful way have made this impossible. I have CC'd Eric directly
on this pull request so he has a chance to provide his side of the
story; there have been no objections outside of Eric's"
* tag 'lsm-pr-20221003' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lockdown: ratelimit denial messages
userfaultfd: open userfaultfds with O_RDONLY
selinux: Implement userns_create hook
selftests/bpf: Add tests verifying bpf lsm userns_create hook
bpf-lsm: Make bpf_lsm_userns_create() sleepable
security, lsm: Introduce security_create_user_ns()
lsm: clean up redundant NULL pointer check
Let me count the ways in which I'd screwed up:
* when emitting a page, handling of gaps in coredump should happen
before fetching the current file position.
* fix for a problem that occurs on rather uncommon setups (and hadn't
been observed in the wild) had been sent very late in the cycle.
* ... with badly insufficient testing, introducing an easily
reproducible breakage. Without giving it time to soak in -next.
Fucked-up-by: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: "J. R. Okajima" <hooanon05g@gmail.com>
Tested-by: "J. R. Okajima" <hooanon05g@gmail.com>
Fixes: 06bbaa6dc5 "[coredump] don't use __kernel_write() on kmap_local_page()"
Cc: stable@kernel.org # v6.0-only
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
- Remove a.out implementation globally (Eric W. Biederman)
- Remove unused linux_binprm::taso member (Lukas Bulwahn)
-----BEGIN PGP SIGNATURE-----
iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmM4bQsWHGtlZXNjb29r
QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJkftD/4gTcnAd3BCUgerhiQfq64kYNPt
l47p0BM6GzXvl1Mf4Q0TDV35WJ/JD5Yd3ij3V7J2XJWSHANUAlHbxm9yfChVLACU
99YRVhuWSdohJkF7p0b8dkAQO551aeodj/JUKGiNrJyNR4L336r+YG5aqEjOSPji
jQH5I4SonDeaGdLy8nYO/aRhEryIF1FqvLH6egNp6Tt8Q69UqDYIojdCgZ/MS5lb
dldrFsDb3ZjoXET0NdeIzZEZVS6zDM2iehb2W8dtRFoNsjMXz4jSiy7AEoprETBz
wAKZ16t0dj2sARLLVGL8i3m2k6tzD6zzkIIoc9X3VOyeOADa6aghagDMyDpRo6ZB
2ML7wMNCHCboCVVfG3n2rWTIFmrqeycAiny0hZxU4bjBBYSxTK4qD9lFQtlXk0cD
BESZhnM6gg87vVFgLV/8aefCvwRd5eb8Pugtwb3qF4NsSvgosZtIXhWnIeU3cjg2
425+4XOPbLsBv/u8NVkG8yIHaHZbtXH78JDIcNFMgSvw9iBwn2NH9184EpHI4qRx
9aBjHPz+VOqzPTnNR6ISP5J4VXaOvHeocb/ckbrS+xhY8zQmbWX9QHaAZ+XnDYby
PVY0HjmYTFSlijHSRhqLqNMHwtOAeiSZwJNk4wh+39H0ynpTzThGjQ9NlGYQ5cUE
TVF5ukO5QRa5GbmhIQ==
=Ns31
-----END PGP SIGNATURE-----
Merge tag 'execve-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve updates from Kees Cook:
"This removes a.out support globally; it has been disabled for a while
now.
- Remove a.out implementation globally (Eric W. Biederman)
- Remove unused linux_binprm::taso member (Lukas Bulwahn)"
* tag 'execve-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
binfmt: remove taso from linux_binprm struct
a.out: Remove the a.out implementation
Mark
/proc/devices
/proc/kpagecount
/proc/kpageflags
/proc/kpagecgroup
/proc/loadavg
/proc/meminfo
/proc/softirqs
/proc/uptime
/proc/version
as permanent /proc entries, saving alloc/free and some list/spinlock ops
per use.
These files are never removed by the kernel so it is OK to mark them.
Link: https://lkml.kernel.org/r/Yyn527DzDMa+r0Yj@localhost.localdomain
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Delete the redundant word 'to'.
Link: https://lkml.kernel.org/r/20220908130036.31149-1-wangjianli@cdjrlc.com
Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 2e13ba54a2 ("fs, proc: introduce CONFIG_PROC_CHILDREN")
introduces the config PROC_CHILDREN to configure kernels to provide the
/proc/<pid>/task/<tid>/children file.
When one deselects PROC_FS for kernel builds without /proc/, the config
PROC_CHILDREN has no effect anymore, but is still visible in menuconfig.
Add the dependency on PROC_FS to make the PROC_CHILDREN option disappear
for kernel builds without /proc/.
Link: https://lkml.kernel.org/r/20220909122529.1941-1-lukas.bulwahn@gmail.com
Fixes: 2e13ba54a2 ("fs, proc: introduce CONFIG_PROC_CHILDREN")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Iago López Galeiras <iago@endocode.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It has many callsites and is large.
text data bss dec hex filename
91796 15984 512 108292 1a704 mm/shmem.o-before
91180 15984 512 107676 1a49c mm/shmem.o-after
Acked-by: Jeff Layton <jlayton@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Zero-length arrays are deprecated and we are moving towards adopting C99
flexible-array members, instead. So, replace zero-length array
declarations in a couple of structures and unions with the new
DECLARE_FLEX_ARRAY() helper macro.
This helper allows for a flexible-array member in a union and as only
member in a structure.
Also, this addresses multiple warnings reported when building with
Clang-15 and -Wzero-length-array.
Lastly, this will also help memcpy (in a coming hardening update) execute
proper bounds-checking on variable length object i_symlink at
fs/ocfs2/namei.c:1973:
fs/ocfs2/namei.c:
1973 memcpy((char *) fe->id2.i_symlink, symname, l);
Link: https://github.com/KSPP/linux/issues/21
Link: https://github.com/KSPP/linux/issues/193
Link: https://github.com/KSPP/linux/issues/197
Link: https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
Link: https://lkml.kernel.org/r/YxKY6O2hmdwNh8r8@work
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Functions implementing the a_ops->write_end() interface accept the `void
*fsdata` parameter that is supposed to be initialized by the corresponding
a_ops->write_begin() (which accepts `void **fsdata`).
However not all a_ops->write_begin() implementations initialize `fsdata`
unconditionally, so it may get passed uninitialized to a_ops->write_end(),
resulting in undefined behavior.
Fix this by initializing fsdata with NULL before the call to
write_begin(), rather than doing so in all possible a_ops implementations.
This patch covers only the following cases found by running x86 KMSAN
under syzkaller:
- generic_perform_write()
- cont_expand_zero() and generic_cont_expand_simple()
- page_symlink()
Other cases of passing uninitialized fsdata may persist in the codebase.
Link: https://lkml.kernel.org/r/20220915150417.722975-43-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With the new hugetlb vma lock in place, it can also be used to handle page
fault races with file truncation. The lock is taken at the beginning of
the code fault path in read mode. During truncation, it is taken in write
mode for each vma which has the file mapped. The file's size (i_size) is
modified before taking the vma lock to unmap.
How are races handled?
The page fault code checks i_size early in processing after taking the vma
lock. If the fault is beyond i_size, the fault is aborted. If the fault
is not beyond i_size the fault will continue and a new page will be added
to the file. It could be that truncation code modifies i_size after the
check in fault code. That is OK, as truncation code will soon remove the
page. The truncation code will wait until the fault is finished, as it
must obtain the vma lock in write mode.
This patch cleans up/removes late checks in the fault paths that try to
back out pages racing with truncation. As noted above, we just let the
truncation code remove the pages.
[mike.kravetz@oracle.com: fix reserve_alloc set but not used compiler warning]
Link: https://lkml.kernel.org/r/Yyj7HsJWfHDoU24U@monkey
Link: https://lkml.kernel.org/r/20220914221810.95771-10-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: James Houghton <jthoughton@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The new hugetlb vma lock is used to address this race:
Faulting thread Unsharing thread
... ...
ptep = huge_pte_offset()
or
ptep = huge_pte_alloc()
...
i_mmap_lock_write
lock page table
ptep invalid <------------------------ huge_pmd_unshare()
Could be in a previously unlock_page_table
sharing process or worse i_mmap_unlock_write
...
The vma_lock is used as follows:
- During fault processing. The lock is acquired in read mode before
doing a page table lock and allocation (huge_pte_alloc). The lock is
held until code is finished with the page table entry (ptep).
- The lock must be held in write mode whenever huge_pmd_unshare is
called.
Lock ordering issues come into play when unmapping a page from all
vmas mapping the page. The i_mmap_rwsem must be held to search for the
vmas, and the vma lock must be held before calling unmap which will
call huge_pmd_unshare. This is done today in:
- try_to_migrate_one and try_to_unmap_ for page migration and memory
error handling. In these routines we 'try' to obtain the vma lock and
fail to unmap if unsuccessful. Calling routines already deal with the
failure of unmapping.
- hugetlb_vmdelete_list for truncation and hole punch. This routine
also tries to acquire the vma lock. If it fails, it skips the
unmapping. However, we can not have file truncation or hole punch
fail because of contention. After hugetlb_vmdelete_list, truncation
and hole punch call remove_inode_hugepages. remove_inode_hugepages
checks for mapped pages and call hugetlb_unmap_file_page to unmap them.
hugetlb_unmap_file_page is designed to drop locks and reacquire in the
correct order to guarantee unmap success.
Link: https://lkml.kernel.org/r/20220914221810.95771-9-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: James Houghton <jthoughton@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Create the new routine hugetlb_unmap_file_folio that will unmap a single
file folio. This is refactored code from hugetlb_vmdelete_list. It is
modified to do locking within the routine itself and check whether the
page is mapped within a specific vma before unmapping.
This refactoring will be put to use and expanded upon in a subsequent
patch adding vma specific locking.
Link: https://lkml.kernel.org/r/20220914221810.95771-8-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: James Houghton <jthoughton@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Create the new routine remove_inode_single_folio that will remove a single
folio from a file. This is refactored code from remove_inode_hugepages.
It checks for the uncommon case in which the folio is still mapped and
unmaps.
No functional change. This refactoring will be put to use and expanded
upon in a subsequent patches.
Link: https://lkml.kernel.org/r/20220914221810.95771-5-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: James Houghton <jthoughton@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
remove_huge_page removes a hugetlb page from the page cache. Change to
hugetlb_delete_from_page_cache as it is a more descriptive name.
huge_add_to_page_cache is global in scope, but only deals with hugetlb
pages. For consistency and clarity, rename to hugetlb_add_to_page_cache.
Link: https://lkml.kernel.org/r/20220914221810.95771-4-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: James Houghton <jthoughton@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit c0d0381ade ("hugetlbfs: use i_mmap_rwsem for more pmd sharing
synchronization") added code to take i_mmap_rwsem in read mode for the
duration of fault processing. However, this has been shown to cause
performance/scaling issues. Revert the code and go back to only taking
the semaphore in huge_pmd_share during the fault path.
Keep the code that takes i_mmap_rwsem in write mode before calling
try_to_unmap as this is required if huge_pmd_unshare is called.
NOTE: Reverting this code does expose the following race condition.
Faulting thread Unsharing thread
... ...
ptep = huge_pte_offset()
or
ptep = huge_pte_alloc()
...
i_mmap_lock_write
lock page table
ptep invalid <------------------------ huge_pmd_unshare()
Could be in a previously unlock_page_table
sharing process or worse i_mmap_unlock_write
...
ptl = huge_pte_lock(ptep)
get/update pte
set_pte_at(pte, ptep)
It is unknown if the above race was ever experienced by a user. It was
discovered via code inspection when initially addressed.
In subsequent patches, a new synchronization mechanism will be added to
coordinate pmd sharing and eliminate this race.
Link: https://lkml.kernel.org/r/20220914221810.95771-3-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: James Houghton <jthoughton@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "hugetlb: Use new vma lock for huge pmd sharing
synchronization", v2.
hugetlb fault scalability regressions have recently been reported [1].
This is not the first such report, as regressions were also noted when
commit c0d0381ade ("hugetlbfs: use i_mmap_rwsem for more pmd sharing
synchronization") was added [2] in v5.7. At that time, a proposal to
address the regression was suggested [3] but went nowhere.
The regression and benefit of this patch series is not evident when
using the vm_scalability benchmark reported in [2] on a recent kernel.
Results from running,
"./usemem -n 48 --prealloc --prefault -O -U 3448054972"
48 sample Avg
next-20220913 next-20220913 next-20220913
unmodified revert i_mmap_sema locking vma sema locking, this series
-----------------------------------------------------------------------------
498150 KB/s 501934 KB/s 504793 KB/s
The recent regression report [1] notes page fault and fork latency of
shared hugetlb mappings. To measure this, I created two simple programs:
1) map a shared hugetlb area, write fault all pages, unmap area
Do this in a continuous loop to measure faults per second
2) map a shared hugetlb area, write fault a few pages, fork and exit
Do this in a continuous loop to measure forks per second
These programs were run on a 48 CPU VM with 320GB memory. The shared
mapping size was 250GB. For comparison, a single instance of the program
was run. Then, multiple instances were run in parallel to introduce
lock contention. Changing the locking scheme results in a significant
performance benefit.
test instances unmodified revert vma
--------------------------------------------------------------------------
faults per sec 1 393043 395680 389932
faults per sec 24 71405 81191 79048
forks per sec 1 2802 2747 2725
forks per sec 24 439 536 500
Combined faults 24 1621 68070 53662
Combined forks 24 358 67 142
Combined test is when running both faulting program and forking program
simultaneously.
Patches 1 and 2 of this series revert c0d0381ade and 87bf91d39b which
depends on c0d0381ade. Acquisition of i_mmap_rwsem is still required in
the fault path to establish pmd sharing, so this is moved back to
huge_pmd_share. With c0d0381ade reverted, this race is exposed:
Faulting thread Unsharing thread
... ...
ptep = huge_pte_offset()
or
ptep = huge_pte_alloc()
...
i_mmap_lock_write
lock page table
ptep invalid <------------------------ huge_pmd_unshare()
Could be in a previously unlock_page_table
sharing process or worse i_mmap_unlock_write
...
ptl = huge_pte_lock(ptep)
get/update pte
set_pte_at(pte, ptep)
Reverting 87bf91d39b exposes races in page fault/file truncation. When
the new vma lock is put to use in patch 8, this will handle the fault/file
truncation races. This is explained in patch 9 where code associated with
these races is cleaned up.
Patches 3 - 5 restructure existing code in preparation for using the new
vma lock (rw semaphore) for pmd sharing synchronization. The idea is that
this semaphore will be held in read mode for the duration of fault
processing, and held in write mode for unmap operations which may call
huge_pmd_unshare. Acquiring i_mmap_rwsem is also still required to
synchronize huge pmd sharing. However it is only required in the fault
path when setting up sharing, and will be acquired in huge_pmd_share().
Patch 6 adds the new vma lock and all supporting routines, but does not
actually change code to use the new lock.
Patch 7 refactors code in preparation for using the new lock. And, patch
8 finally adds code to make use of this new vma lock. Unfortunately, the
fault code and truncate/hole punch code would naturally take locks in the
opposite order which could lead to deadlock. Since the performance of
page faults is more important, the truncation/hole punch code is modified
to back out and take locks in the correct order if necessary.
[1] https://lore.kernel.org/linux-mm/43faf292-245b-5db5-cce9-369d8fb6bd21@infradead.org/
[2] https://lore.kernel.org/lkml/20200622005551.GK5535@shao2-debian/
[3] https://lore.kernel.org/linux-mm/20200706202615.32111-1-mike.kravetz@oracle.com/
This patch (of 9):
Commit c0d0381ade ("hugetlbfs: use i_mmap_rwsem for more pmd sharing
synchronization") added code to take i_mmap_rwsem in read mode for the
duration of fault processing. The use of i_mmap_rwsem to prevent
fault/truncate races depends on this. However, this has been shown to
cause performance/scaling issues. As a result, that code will be
reverted. Since the use i_mmap_rwsem to address page fault/truncate races
depends on this, it must also be reverted.
In a subsequent patch, code will be added to detect the fault/truncate
race and back out operations as required.
Link: https://lkml.kernel.org/r/20220914221810.95771-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20220914221810.95771-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: James Houghton <jthoughton@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
NFSv4 mandates a change attribute to avoid problems with timestamp
granularity, which Linux implements using the i_version counter. This is
particularly important when the underlying filesystem is fast.
Give tmpfs an i_version counter. Since it doesn't have to be persistent,
we can just turn on SB_I_VERSION and sprinkle some inode_inc_iversion
calls in the right places.
Also, while there is no formal spec for xattrs, most implementations
update the ctime on setxattr. Fix shmem_xattr_handler_set to update the
ctime and bump the i_version appropriately.
Link: https://lkml.kernel.org/r/20220909130031.15477-1-jlayton@kernel.org
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Changed .iterate to .iterate_shared in orangefs_dir_operations. I
didn't change anything else, there were no xfstests regressions
and no problem with any of my other tests...
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
We want to ensure that the server never misses the layout stats when
we're closing the file, so that it knows whether or not to update its
internal state. Otherwise, if we were racing with a layout stat, we
might cause the server to invalidate its layout before the layout stat
got processed.
Fixes: 06946c6a3d ("pNFS/flexfiles: Only send layoutstats updates for mirrors that were updated")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Commit 064109db53 ("NFS: remove redundant code in nfs_file_write()")
identifies that filemap_fdatawait_range() will always return 0 and removes
a dead error-handling case in nfs_file_write(). With this change however,
assigning the return of filemap_fdatawait_range() to the result variable is
a dead store.
Remove this needless assignment.
No functional change. No change in object code.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Use ida_alloc()/ida_free() instead of
ida_simple_get()/ida_simple_remove().
The latter is deprecated and more verbose.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Add a new tracepoint so we can see what mapping the filesystem returns
to writeback a dirty page.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
For scan loop must ensure that at least EXT4_FC_TAG_BASE_LEN space. If remain
space less than EXT4_FC_TAG_BASE_LEN which will lead to out of bound read
when mounting corrupt file system image.
ADD_RANGE/HEAD/TAIL is needed to add extra check when do journal scan, as this
three tags will read data during scan, tag length couldn't less than data length
which will read.
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20220924075233.2315259-4-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out ext4_free_ext_path() to free extent path. As after previous patch
'ext4_ext_drop_refs()' is only used in 'extents.c', so make it static.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220924021211.3831551-3-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
According to Jan Kara's suggestion:
"The use in mext_check_coverage() can be actually removed
- get_ext_path() -> ext4_find_extent() takes care of dropping the references."
So remove unnecessary call ext4_ext_drop_refs() in mext_check_coverage().
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220924021211.3831551-2-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
To avoid to 'state->fc_regions_size' mismatch with 'state->fc_regions'
when fail to reallocate 'fc_reqions',only update 'state->fc_regions_size'
after 'state->fc_regions' is allocated successfully.
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220921064040.3693255-4-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
As krealloc may return NULL, in this case 'state->fc_regions' may not be
freed by krealloc, but 'state->fc_regions' already set NULL. Then will
lead to 'state->fc_regions' memory leak.
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220921064040.3693255-3-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
As krealloc may return NULL, in this case 'state->fc_modified_inodes'
may not be freed by krealloc, but 'state->fc_modified_inodes' already
set NULL. Then will lead to 'state->fc_modified_inodes' memory leak.
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220921064040.3693255-2-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now since all preparations is done, we can move the DIOREAD_NOLOCK
setting to ext4_set_def_opts().
Suggested-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220916141527.1012715-17-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since sb->s_blocksize is now initialized at the very beginning, the
local variable 'blocksize' in __ext4_fill_super() is not needed now.
Remove it and use sb->s_blocksize instead.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220916141527.1012715-16-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now we load the super block from the disk in two steps. First we load
the super block with the default block size(EXT4_MIN_BLOCK_SIZE). Second
we load the super block with the real block size. The second step is a
little far from the first step. This patch move these two steps together
in a new function.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220916141527.1012715-15-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out ext4_journal_data_mode_check(). No functional change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara<jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-14-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch group the journal load and initialize code together and
factor out ext4_load_and_init_journal(). This patch also removes the
lable 'no_journal' which is not needed after refactor.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-13-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out ext4_group_desc_init() and ext4_group_desc_free(). No
functional change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-12-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out ext4_geometry_check(). No functional change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-11-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out ext4_check_feature_compatibility(). No functional change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-10-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out ext4_init_metadata_csum(). No functional change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-9-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out ext4_inode_info_init(). No functional change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-7-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out ext4_fast_commit_init(). No functional change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-6-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out ext4_handle_clustersize(). No functional change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-5-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out ext4_set_def_opts(). No functional change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-4-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The 'cantfind_ext4' error handler is just a error msg print and then
goto failed_mount. This two level goto makes the code complex and not
easy to read. The only benefit is that is saves a little bit code.
However some branches can merge and some branches dot not even need it.
So do some refactor and remove it.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-3-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Before these two branches neither loaded the journal nor created the
xattr cache. So the right label to goto is 'failed_mount3a'. Although
this did not cause any issues because the error handler validated if the
pointer is null. However this still made me confused when reading
the code. So it's still worth to modify to goto the right label.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-2-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If fastcommit is already disabled, there isn't need to mark inode ineligible.
So move 'ext4_fc_disabled()' judgement bofore 'ext4_should_journal_data(inode)'
judgement which can avoid to do meaningless judgement.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220916083836.388347-3-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In 'ext4_fc_write_inode' function first call 'ext4_get_inode_loc' get 'iloc',
after use it miss release 'iloc.bh'.
So just release 'iloc.bh' before 'ext4_fc_write_inode' return.
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220914100859.1415196-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In 'jbd2_fc_wait_bufs' use 'bh' after put buffer head reference count
which may lead to use-after-free.
So judge buffer if uptodate before put buffer head reference count.
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220914100812.1414768-3-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
As in 'jbd2_fc_wait_bufs' if buffer isn't uptodate, will return -EIO without
update 'journal->j_fc_off'. But 'jbd2_fc_release_bufs' will release buffer head
from ‘j_fc_off - 1’ if 'bh' is NULL will terminal release which will lead to
buffer head buffer head reference count leak.
To solve above issue, update 'journal->j_fc_off' before return -EIO.
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220914100812.1414768-2-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Following process may lead to fs corruption:
1. ext4_create(dir/foo)
ext4_add_nondir
ext4_add_entry
ext4_dx_add_entry
a. add_dirent_to_buf
ext4_mark_inode_dirty
ext4_handle_dirty_metadata // dir inode bh is recorded into journal
b. ext4_append // dx_get_count(entries) == dx_get_limit(entries)
ext4_bread(EXT4_GET_BLOCKS_CREATE)
ext4_getblk
ext4_map_blocks
ext4_ext_map_blocks
ext4_mb_new_blocks
dquot_alloc_block
dquot_alloc_space_nodirty
inode_add_bytes // update dir's i_blocks
ext4_ext_insert_extent
ext4_ext_dirty // record extent bh into journal
ext4_handle_dirty_metadata(bh)
// record new block into journal
inode->i_size += inode->i_sb->s_blocksize // new size(in mem)
c. ext4_handle_dirty_dx_node(bh2)
// record dir's new block(dx_node) into journal
d. ext4_handle_dirty_dx_node((frame - 1)->bh)
e. ext4_handle_dirty_dx_node(frame->bh)
f. do_split // ret err!
g. add_dirent_to_buf
ext4_mark_inode_dirty(dir) // update raw_inode on disk(skipped)
2. fsck -a /dev/sdb
drop last block(dx_node) which beyonds dir's i_size.
/dev/sdb: recovering journal
/dev/sdb contains a file system with errors, check forced.
/dev/sdb: Inode 12, end of extent exceeds allowed value
(logical block 128, physical block 3938, len 1)
3. fsck -fn /dev/sdb
dx_node->entry[i].blk > dir->i_size
Pass 2: Checking directory structure
Problem in HTREE directory inode 12 (/dir): bad block number 128.
Clear HTree index? no
Problem in HTREE directory inode 12: block #3 has invalid depth (2)
Problem in HTREE directory inode 12: block #3 has bad max hash
Problem in HTREE directory inode 12: block #3 not referenced
Fix it by marking inode dirty directly inside ext4_append().
Fetch a reproducer in [Link].
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216466
Cc: stable@vger.kernel.org
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220911045204.516460-1-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_inline_data_fiemap() has been removed since
commit d3b6f23f71 ("ext4: move ext4_fiemap to use iomap framework"),
so remove it.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220909065307.1155201-1-cuigaosheng1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4 currently updates the i_version counter when the atime is updated
during a read. This is less than ideal as it can cause unnecessary cache
invalidations with NFSv4 and unnecessary remeasurements for IMA.
The increment in ext4_mark_iloc_dirty is also problematic since it can
corrupt the i_version counter for ea_inodes. We aren't bumping the file
times in ext4_mark_iloc_dirty, so changing the i_version there seems
wrong, and is the cause of both problems.
Remove that callsite and add increments to the setattr, setxattr and
ioctl codepaths, at the same times that we update the ctime. The
i_version bump that already happens during timestamp updates should take
care of the rest.
In ext4_move_extents, increment the i_version on both inodes, and also
add in missing ctime updates.
[ Some minor updates since we've already enabled the i_version counter
unconditionally already via another patch series. -- TYT ]
Cc: stable@kernel.org
Cc: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20220908172448.208585-3-jlayton@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit 307af6c879 ("mbcache: automatically delete entries from cache
on freeing") started nesting cache->c_list_lock under the bit locks
protecting hash buckets of the mbcache hash table in
mb_cache_entry_create(). This causes problems for real-time kernels
because there spinlocks are sleeping locks while bitlocks stay atomic.
Luckily the nesting is easy to avoid by holding entry reference until
the entry is added to the LRU list. This makes sure we cannot race with
entry deletion.
Cc: stable@kernel.org
Fixes: 307af6c879 ("mbcache: automatically delete entries from cache on freeing")
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220908091032.10513-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
LIFO wakeup order is unfair and sometimes leads to a journal
user not being able to get a journal handle for hundreds of
transactions in a row.
FIFO wakeup can make things more fair.
Cc: stable@kernel.org
Signed-off-by: Alexey Lyashkov <alexey.lyashkov@gmail.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220907165959.1137482-1-alexey.lyashkov@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In our product environment, we encounter some jbd hung waiting handles to
stop while several writters were doing memory reclaim for buffer head
allocation in delay alloc write path. Ext4 do buffer head allocation with
holding transaction handle which may be blocked too long if the reclaim
works not so smooth. According to our bcc trace, the reclaim time in
buffer head allocation can reach 258s and the jbd transaction commit also
take almost the same time meanwhile. Except for these extreme cases,
we often see several seconds delays for cgroup memory reclaim on our
servers. This is more likely to happen considering docker environment.
One thing to note, the allocation of buffer heads is as often as page
allocation or more often when blocksize less than page size. Just like
page cache allocation, we should also place the buffer head allocation
before startting the handle.
Cc: stable@kernel.org
Signed-off-by: Jinke Han <hanjinke.666@bytedance.com>
Link: https://lore.kernel.org/r/20220903012429.22555-1-hanjinke.666@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Recently we notice that ext4 filesystem would occasionally fail to read
metadata from disk and report error message, but the disk and block
layer looks fine. After analyse, we lockon commit 88dbcbb3a4
("blkdev: avoid migration stalls for blkdev pages"). It provide a
migration method for the bdev, we could move page that has buffers
without extra users now, but it lock the buffers on the page, which
breaks the fragile metadata read operation on ext4 filesystem,
ext4_read_bh_lock() was copied from ll_rw_block(), it depends on the
assumption of that locked buffer means it is under IO. So it just
trylock the buffer and skip submit IO if it lock failed, after
wait_on_buffer() we conclude IO error because the buffer is not
uptodate.
This issue could be easily reproduced by add some delay just after
buffer_migrate_lock_buffers() in __buffer_migrate_folio() and do
fsstress on ext4 filesystem.
EXT4-fs error (device pmem1): __ext4_find_entry:1658: inode #73193:
comm fsstress: reading directory lblock 0
EXT4-fs error (device pmem1): __ext4_find_entry:1658: inode #75334:
comm fsstress: reading directory lblock 0
Fix it by removing the trylock logic in ext4_read_bh_lock(), just lock
the buffer and submit IO if it's not uptodate, and also leave over
readahead helper.
Cc: stable@kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220831074629.3755110-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The original i_version implementation was pretty expensive, requiring a
log flush on every change. Because of this, it was gated behind a mount
option (implemented via the MS_I_VERSION mountoption flag).
Commit ae5e165d85 (fs: new API for handling inode->i_version) made the
i_version flag much less expensive, so there is no longer a performance
penalty from enabling it. xfs and btrfs already enable it
unconditionally when the on-disk format can support it.
Have ext4 ignore the SB_I_VERSION flag, and just enable it
unconditionally. While we're in here, mark the i_version mount
option Opt_removed.
[ Removed leftover bits of i_version from ext4_apply_options() since it
now can't ever be set in ctx->mask_s_flags -- lczerner ]
Cc: stable@kernel.org
Cc: Dave Chinner <david@fromorbit.com>
Cc: Benjamin Coddington <bcodding@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220824160349.39664-3-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
- Revert crypto acomp migration (Guilherme G. Piccoli)
-----BEGIN PGP SIGNATURE-----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=KoAn
-----END PGP SIGNATURE-----
Merge tag 'pstore-v6.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore revert from Kees Cook:
"A misbehavior with some compression backends in pstore was just
discovered due to the recent crypto acomp migration.
Since we're so close to release, it seems better to just simply revert
it, and we can figure out what's going on without leaving it broken
for a release.
- Revert crypto acomp migration (Guilherme G. Piccoli)"
* tag 'pstore-v6.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
Revert "pstore: migrate to crypto acomp interface"
This reverts commit e4f0a7ec58.
When using this new interface, both efi_pstore and ramoops
backends are unable to properly decompress dmesg if using
zstd, lz4 and lzo algorithms (and maybe more). It does succeed
with deflate though.
The message observed in the kernel log is:
[2.328828] pstore: crypto_acomp_decompress failed, ret = -22!
The pstore infrastructure is able to collect the dmesg with
both backends tested, but since decompression fails it's
unreadable. With this revert everything is back to normal.
Fixes: e4f0a7ec58 ("pstore: migrate to crypto acomp interface")
Cc: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220929215515.276486-1-gpiccoli@igalia.com
Currently the I_DIRTY_TIME will never get set if the inode already has
I_DIRTY_INODE with assumption that it supersedes I_DIRTY_TIME. That's
true, however ext4 will only update the on-disk inode in
->dirty_inode(), not on actual writeback. As a result if the inode
already has I_DIRTY_INODE state by the time we get to
__mark_inode_dirty() only with I_DIRTY_TIME, the time was already filled
into on-disk inode and will not get updated until the next I_DIRTY_INODE
update, which might never come if we crash or get a power failure.
The problem can be reproduced on ext4 by running xfstest generic/622
with -o iversion mount option.
Fix it by allowing I_DIRTY_TIME to be set even if the inode already has
I_DIRTY_INODE. Also make sure that the case is properly handled in
writeback_single_inode() as well. Additionally changes in
xfs_fs_dirty_inode() was made to accommodate for I_DIRTY_TIME in flag.
Thanks Jan Kara for suggestions on how to make this work properly.
Cc: Dave Chinner <david@fromorbit.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: stable@kernel.org
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220825100657.44217-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ea_inodes are using i_version for storing part of the reference count so
we really need to leave it alone.
The problem can be reproduced by xfstest ext4/026 when iversion is
enabled. Fix it by not calling inode_inc_iversion() for EXT4_EA_INODE_FL
inodes in ext4_mark_iloc_dirty().
Cc: stable@kernel.org
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Link: https://lore.kernel.org/r/20220824160349.39664-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The check in __ext4_read_dirblock() for block being outside of directory
size was wrong because it compared block number against directory size
in bytes. Fix it.
Fixes: 65f8ea4cd5 ("ext4: check if directory block is within i_size")
CVE: CVE-2022-1184
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Link: https://lore.kernel.org/r/20220822114832.1482-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
submit_bh/submit_bh_wbc are non-blocking functions which just submit
the bio and return. The caller of submit_bh/submit_bh_wbc needs to wait
on buffer till I/O completion and then check buffer head's b_state field
to know if there was any I/O error.
Hence there is no need for these functions to have any return type.
Even now they always returns 0. Hence drop the return value and make
their return type as void to avoid any confusion.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/cb66ef823374cdd94d2d03083ce13de844fffd41.1660788334.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
submit_bh always returns 0. This patch drops the useless return value of
submit_bh from __sync_dirty_buffer(). Once all of submit_bh callers are
cleaned up, we can make it's return type as void.
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/a98a6ddfac68f73d684c2724952e825bc1f4d238.1660788334.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
submit_bh always returns 0. This patch drops the useless return value of
submit_bh from ntfs_submit_bh_for_read(). Once all of submit_bh callers are
cleaned up, we can make it's return type as void.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/d82eb29e8dbc52fe13a7affef5c907ea4076aa31.1660788334.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
submit_bh always returns 0. This patch cleans up 2 of it's caller
in jbd2 to drop submit_bh's useless return value.
Once all submit_bh callers are cleaned up, we can make it's return
type as void.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/e069c0539be0aec61abcdc6f6141982ec85d489d.1660788334.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_lazyinit_thread is not set freezable. Hence when the thread calls
try_to_freeze it doesn't freeze during suspend and continues to send
requests to the storage during suspend, resulting in suspend failures.
Cc: stable@kernel.org
Signed-off-by: Lalith Rajendran <lalithkraj@google.com>
Link: https://lore.kernel.org/r/20220818214049.1519544-1-lalithkraj@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCYzXkrwAKCRBZ7Krx/gZQ
6+BcAP4+OfgZO6qStFjroURhZ8o3qfCJpYde/fGN5S/F/5UMdAD6A+4yozxXLdMZ
wb2oB0XhxHv33vFdFfEeodquTnn+MAQ=
=1Mnt
-----END PGP SIGNATURE-----
Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull coredump fix from Al Viro:
"Fix for breakage in dump_user_range()"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
[coredump] don't use __kernel_write() on kmap_local_page()
syzbot is reporting uninit-value in btrfs_clean_tree_block() [1], for
commit bc877d285c ("btrfs: Deduplicate extent_buffer init code")
missed that btrfs_set_header_generation() in btrfs_init_new_buffer() must
not be moved to after clean_tree_block() because clean_tree_block() is
calling btrfs_header_generation() since commit 55c69072d6 ("Btrfs:
Fix extent_buffer usage when nodesize != leafsize").
Since memzero_extent_buffer() will reset "struct btrfs_header" part, we
can't move btrfs_set_header_generation() to before memzero_extent_buffer().
Just re-add btrfs_set_header_generation() before btrfs_clean_tree_block().
Link: https://syzkaller.appspot.com/bug?extid=fba8e2116a12609b6c59 [1]
Reported-by: syzbot <syzbot+fba8e2116a12609b6c59@syzkaller.appspotmail.com>
Fixes: bc877d285c ("btrfs: Deduplicate extent_buffer init code")
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently when dropping extent maps for a file range, through
btrfs_drop_extent_map_range(), we do the following non-optimal things:
1) We lookup for extent maps one by one, always starting the search from
the root of the extent map tree. This is not efficient if we have
multiple extent maps in the range;
2) We check on every iteration if we have the 'split' and 'split2' spare
extent maps in case we need to split an extent map that intersects our
range but also crosses its boundaries (to the left, to the right or
both cases). If our target range is for example:
[2M, 8M)
And we have 3 extents maps in the range:
[1M, 3M) [3M, 6M) [6M, 10M[
The on the first iteration we allocate two extent maps for 'split' and
'split2', and use the 'split' to split the first extent map, so after
the split we set 'split' to 'split2' and then set 'split2' to NULL.
On the second iteration, we don't need to split the second extent map,
but because 'split2' is now NULL, we allocate a new extent map for
'split2'.
On the third iteration we need to split the third extent map, so we
use the extent map pointed by 'split'.
So we ended up allocating 3 extent maps for splitting, but all we
needed was 2 extent maps. We never need to allocate more than 2,
because extent maps that need to be split are always the first one
and the last one in the target range.
Improve on this by:
1) Using rb_next() to move on to the next extent map. This results in
iterating over less nodes of the tree and it does not require comparing
the ranges of nodes to our start/end offset;
2) Allocate the 2 extent maps for splitting before entering the loop and
never allocate more than 2. In practice it's very rare to have the
combination of both extent map allocations fail, since we have a
dedicated slab for extent maps, and also have the need to split two
extent maps.
This patch is part of a patchset comprised of the following patches:
btrfs: fix missed extent on fsync after dropping extent maps
btrfs: move btrfs_drop_extent_cache() to extent_map.c
btrfs: use extent_map_end() at btrfs_drop_extent_map_range()
btrfs: use cond_resched_rwlock_write() during inode eviction
btrfs: move open coded extent map tree deletion out of inode eviction
btrfs: add helper to replace extent map range with a new extent map
btrfs: remove the refcount warning/check at free_extent_map()
btrfs: remove unnecessary extent map initializations
btrfs: assert tree is locked when clearing extent map from logging
btrfs: remove unnecessary NULL pointer checks when searching extent maps
btrfs: remove unnecessary next extent map search
btrfs: avoid pointless extent map tree search when flushing delalloc
btrfs: drop extent map range more efficiently
And the following fio test was done before and after applying the whole
patchset, on a non-debug kernel (Debian's default kernel config) on a 12
cores Intel box with 64G of ram:
$ cat test.sh
#!/bin/bash
DEV=/dev/nvme0n1
MNT=/mnt/nvme0n1
MOUNT_OPTIONS="-o ssd"
MKFS_OPTIONS="-R free-space-tree -O no-holes"
cat <<EOF > /tmp/fio-job.ini
[writers]
rw=randwrite
fsync=8
fallocate=none
group_reporting=1
direct=0
bssplit=4k/20:8k/20:16k/20:32k/10:64k/10:128k/5:256k/5:512k/5:1m/5
ioengine=psync
filesize=2G
runtime=300
time_based
directory=$MNT
numjobs=8
thread
EOF
echo performance | \
tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
echo
echo "Using config:"
echo
cat /tmp/fio-job.ini
echo
umount $MNT &> /dev/null
mkfs.btrfs -f $MKFS_OPTIONS $DEV
mount $MOUNT_OPTIONS $DEV $MNT
fio /tmp/fio-job.ini
umount $MNT
Result before applying the patchset:
WRITE: bw=197MiB/s (206MB/s), 197MiB/s-197MiB/s (206MB/s-206MB/s), io=57.7GiB (61.9GB), run=300188-300188msec
Result after applying the patchset:
WRITE: bw=203MiB/s (213MB/s), 203MiB/s-203MiB/s (213MB/s-213MB/s), io=59.5GiB (63.9GB), run=300019-300019msec
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When flushing delalloc, in COW mode at cow_file_range(), before entering
the loop that allocates extents and creates ordered extents, we do a call
to btrfs_drop_extent_map_range() for the whole range. This is pointless
because in the loop we call create_io_em(), which will also call
btrfs_drop_extent_map_range() before inserting the new extent map.
So remove that call at cow_file_range() not only because it is not needed,
but also because it will make the btrfs_drop_extent_map_range() calls made
from create_io_em() waste time searching the extent map tree, and that
tree can be large for files with many extents. It also makes us waste time
at btrfs_drop_extent_map_range() allocating and freeing the split extent
maps for nothing.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At __tree_search(), and its single caller __lookup_extent_mapping(), there
is no point in finding the next extent map that starts after the search
offset if we were able to find the previous extent map that ends before
our search offset, because __lookup_extent_mapping() ignores the next
acceptable extent map if we were able to find the previous one.
So just return immediately if we were able to find the previous extent
map, therefore avoiding wasting time iterating the tree looking for the
next extent map which will not be used by __lookup_extent_mapping().
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The previous and next pointer arguments passed to __tree_search() are
never NULL as the only caller of this function, __lookup_extent_mapping(),
always passes the address of two on stack pointers. So remove the NULL
checks and add assertions to verify the pointers.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When calling clear_em_logging() we should have a write lock on the extent
map tree, as we will try to merge the extent map with the previous and
next ones in the tree. So assert that we have a write lock.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When allocating an extent map, we use kmem_cache_zalloc() which guarantees
the returned memory is initialized to zeroes, therefore it's pointless
to initialize the generation and flags of the extent map to zero again.
Remove those initializations, as they are pointless and slightly increase
the object text size.
Before removing them:
$ size fs/btrfs/extent_map.o
text data bss dec hex filename
9241 274 24 9539 2543 fs/btrfs/extent_map.o
After removing them:
$ size fs/btrfs/extent_map.o
text data bss dec hex filename
9209 274 24 9507 2523 fs/btrfs/extent_map.o
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At free_extent_map(), it's pointless to have a WARN_ON() to check if the
refcount of the extent map is zero. Such check is already done by the
refcount_t module and refcount_dec_and_test(), which loudly complains if
we try to decrement a reference count that is currently 0.
The WARN_ON() dates back to the time when used a regular atomic_t type
for the reference counter, before we switched to the refcount_t type.
The main goal of the refcount_t type/module is precisely to catch such
types of bugs and loudly complain if they happen.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have several places that need to drop all the extent maps in a given
file range and then add a new extent map for that range. Currently they
call btrfs_drop_extent_map_range() to delete all extent maps in the range
and then keep trying to add the new extent map in a loop that keeps
retrying while the insertion of the new extent map fails with -EEXIST.
So instead of repeating this logic, add a helper to extent_map.c that
does these steps and name it btrfs_replace_extent_map_range(). Also add
a comment about why the retry loop is necessary.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move the loop that removes all the extent maps from the inode's extent
map tree during inode eviction out of inode.c and into extent_map.c, to
btrfs_drop_extent_map_range(). Anything manipulating extent maps or the
extent map tree should be in extent_map.c.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At evict_inode_truncate_pages(), instead of manually checking if
rescheduling is needed, then unlock the extent map tree, reschedule and
then write lock again the tree, use the helper cond_resched_rwlock_write()
which does all that.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of open coding the end offset calculation of an extent map, use
the helper extent_map_end() and cache its result in a local variable,
since it's used several times.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function btrfs_drop_extent_cache() doesn't really belong at file.c
because what it does is drop a range of extent maps for a file range.
It directly allocates and manipulates extent maps, by dropping,
splitting and replacing them in an extent map tree, so it should be
located at extent_map.c, where all manipulations of an extent map tree
and its extent maps are supposed to be done.
So move it out of file.c and into extent_map.c. Additionally do the
following changes:
1) Rename it into btrfs_drop_extent_map_range(), as this makes it more
clear about what it does. The term "cache" is a bit confusing as it's
not widely used, "extent maps" or "extent mapping" is much more common;
2) Change its 'skip_pinned' argument from int to bool;
3) Turn several of its local variables from int to bool, since they are
used as booleans;
4) Move the declaration of some variables out of the function's main
scope and into the scopes where they are used;
5) Remove pointless assignment of false to 'modified' early in the while
loop, as later that variable is set and it's not used before that
second assignment;
6) Remove checks for NULL before calling free_extent_map().
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When dropping extent maps for a range, through btrfs_drop_extent_cache(),
if we find an extent map that starts before our target range and/or ends
before the target range, and we are not able to allocate extent maps for
splitting that extent map, then we don't fail and simply remove the entire
extent map from the inode's extent map tree.
This is generally fine, because in case anyone needs to access the extent
map, it can just load it again later from the respective file extent
item(s) in the subvolume btree. However, if that extent map is new and is
in the list of modified extents, then a fast fsync will miss the parts of
the extent that were outside our range (that needed to be split),
therefore not logging them. Fix that by marking the inode for a full
fsync. This issue was introduced after removing BUG_ON()s triggered when
the split extent map allocations failed, done by commit 7014cdb493
("Btrfs: btrfs_drop_extent_cache should never fail"), back in 2012, and
the fast fsync path already existed but was very recent.
Also, in the case where we could allocate extent maps for the split
operations but then fail to add a split extent map to the tree, mark the
inode for a full fsync as well. This is not supposed to ever fail, and we
assert that, but in case assertions are disabled (CONFIG_BTRFS_ASSERT is
not set), it's the correct thing to do to make sure a fast fsync will not
miss a new extent.
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function no longer exists, was removed in 3c4276936f ("Btrfs: fix
btrfs_write_inode vs delayed iput deadlock").
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable nowait async buffered writes in btrfs_do_write_iter() and
btrfs_file_open().
In this version encoded buffered writes have the optimization not
enabled. Encoded writes are enabled by using an ioctl. io_uring
currently does not support ioctls. This might be enabled in the future.
Performance results:
For fio the following results have been obtained with a queue depth of
1 and 4k block size (runtime 600 secs):
sequential writes:
without patch with patch libaio psync
iops: 55k 134k 117K 148K
bw: 221MB/s 538MB/s 469MB/s 592MB/s
clat: 15286ns 82ns 994ns 6340ns
For an io depth of 1, the new patch improves throughput by over two
times (compared to the existing behavior, where buffered writes are
processed by an io-worker process) and also the latency is considerably
reduced. To achieve the same or better performance with the existing
code an io depth of 4 is required. Increasing the iodepth further does
not lead to improvements.
The tests have been run like this:
./fio --name=seq-writers --ioengine=psync --iodepth=1 --rw=write \
--bs=4k --direct=0 --size=100000m --time_based --runtime=600 \
--numjobs=1 --filename=...
./fio --name=seq-writers --ioengine=io_uring --iodepth=1 --rw=write \
--bs=4k --direct=0 --size=100000m --time_based --runtime=600 \
--numjobs=1 --filename=...
./fio --name=seq-writers --ioengine=libaio --iodepth=1 --rw=write \
--bs=4k --direct=0 --size=100000m --time_based --runtime=600 \
--numjobs=1 --filename=...
Testing:
This patch has been tested with xfstests, fsx, fio. xfstests shows no new
diffs compared to running without the patch series.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Adds nowait asserts to btree search functions which are not used by
buffered IO and direct IO paths.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We need to avoid unconditionally calling balance_dirty_pages_ratelimited
as it could wait for some reason. Use balance_dirty_pages_ratelimited_flags
with the BDP_ASYNC in case the buffered write is nowait, returning
EAGAIN eventually.
It also moves the function after the again label. This can cause the
function to be called a bit later, but this should have no impact in the
real world.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have everywhere setup for nowait, plumb NOWAIT through the write path.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Stefan Roesch <shr@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add the nowait parameter to lock_and_cleanup_extent_if_need(). If the
nowait parameter is specified we try to lock the extent in nowait mode.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add nowait parameter to the prepare_pages function. In case nowait is
specified for an async buffered write request, do a nowait allocation or
return -EAGAIN.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now all the helpers that btrfs_check_nocow_lock uses handle nowait, add
a nowait flag to btrfs_check_nocow_lock so it can be used by the write
path.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Stefan Roesch <shr@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For IOCB_NOWAIT we're going to want to use try lock on the extent lock,
and simply bail if there's an ordered extent in the range because the
only choice there is to wait for the ordered extent to complete.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In order to accommodate NOWAIT IOCB's we need to be able to do NO_FLUSH
data reservations, so plumb this through the delalloc reservation
system.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Stefan Roesch <shr@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we have NOWAIT specified on our IOCB and we're writing into a
PREALLOC or NOCOW extent then we need to be able to tell
can_nocow_extent that we don't want to wait on any locks or metadata IO.
Fix can_nocow_extent to allow for NOWAIT.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
On a read-only filesystem, we won't invoke the block allocator, so we
don't need to prefetch the block bitmaps.
This avoids starting and running the ext4lazyinit thread at all on a
system with no read-write ext4 filesystems (for instance, a container VM
with read-only filesystems underneath an overlayfs).
Fixes: 21175ca434 ("ext4: make prefetch_block_bitmaps default")
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Link: https://lore.kernel.org/r/48b41da1498fcac3287e2e06b660680646c1c050.1659323972.git.josh@joshtriplett.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When inode is created and written to using direct IO, there is nothing
to clear the EXT4_STATE_MAY_INLINE_DATA flag. Thus when inode gets
truncated later to say 1 byte and written using normal write, we will
try to store the data as inline data. This confuses the code later
because the inode now has both normal block and inline data allocated
and the confusion manifests for example as:
kernel BUG at fs/ext4/inode.c:2721!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 359 Comm: repro Not tainted 5.19.0-rc8-00001-g31ba1e3b8305-dirty #15
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014
RIP: 0010:ext4_writepages+0x363d/0x3660
RSP: 0018:ffffc90000ccf260 EFLAGS: 00010293
RAX: ffffffff81e1abcd RBX: 0000008000000000 RCX: ffff88810842a180
RDX: 0000000000000000 RSI: 0000008000000000 RDI: 0000000000000000
RBP: ffffc90000ccf650 R08: ffffffff81e17d58 R09: ffffed10222c680b
R10: dfffe910222c680c R11: 1ffff110222c680a R12: ffff888111634128
R13: ffffc90000ccf880 R14: 0000008410000000 R15: 0000000000000001
FS: 00007f72635d2640(0000) GS:ffff88811b000000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000565243379180 CR3: 000000010aa74000 CR4: 0000000000150eb0
Call Trace:
<TASK>
do_writepages+0x397/0x640
filemap_fdatawrite_wbc+0x151/0x1b0
file_write_and_wait_range+0x1c9/0x2b0
ext4_sync_file+0x19e/0xa00
vfs_fsync_range+0x17b/0x190
ext4_buffered_write_iter+0x488/0x530
ext4_file_write_iter+0x449/0x1b90
vfs_write+0xbcd/0xf40
ksys_write+0x198/0x2c0
__x64_sys_write+0x7b/0x90
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK>
Fix the problem by clearing EXT4_STATE_MAY_INLINE_DATA when we are doing
direct IO write to a file.
Cc: stable@kernel.org
Reported-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Reported-by: syzbot+bd13648a53ed6933ca49@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=a1e89d09bbbcbd5c4cb45db230ee28c822953984
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Tested-by: Tadeusz Struk<tadeusz.struk@linaro.org>
Link: https://lore.kernel.org/r/20220727155753.13969-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
It would be better to do more sanity checking (eg. dqdh_entries,
block no.) for the content read from quota file, which can prevent
corrupting the quota file.
Link: https://lore.kernel.org/r/20220923134555.2623931-4-chengzhihao1@huawei.com
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
kernel/printk/printk.c:365:1: warning: symbol 'log_wait' was not declared. Should it be static?
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220924000454.3319186-3-john.ogness@linutronix.de
passing kmap_local_page() result to __kernel_write() is unsafe -
random ->write_iter() might (and 9p one does) get unhappy when
passed ITER_KVEC with pointer that came from kmap_local_page().
Fix by providing a variant of __kernel_write() that takes an iov_iter
from caller (__kernel_write() becomes a trivial wrapper) and adding
dump_emit_page() that parallels dump_emit(), except that instead of
__kernel_write() it uses __kernel_write_iter() with ITER_BVEC source.
Fixes: 3159ed5779 "fs/coredump: use kmap_local_page()"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Modify the error returns for two file types that can't be defragged to
more clearly communicate those restrictions to a caller. When the
defrag code is applied to swap files, return -ETXTBSY, and when applied
to quota files, return -EOPNOTSUPP. Move an extent tree search whose
results are only occasionally required to the site always requiring them
for improved efficiency. Address a few typos.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20220722163910.268564-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When expanding a file system from (16TiB-2MiB) to 18TiB, the operation
exits early which leads to result inconsistency between resize2fs and
Ext4 kernel driver.
=== before ===
○ → resize2fs /dev/mapper/thin
resize2fs 1.45.5 (07-Jan-2020)
Filesystem at /dev/mapper/thin is mounted on /mnt/test; on-line resizing required
old_desc_blocks = 2048, new_desc_blocks = 2304
The filesystem on /dev/mapper/thin is now 4831837696 (4k) blocks long.
[ 865.186308] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 912.091502] dm-4: detected capacity change from 34359738368 to 38654705664
[ 970.030550] dm-5: detected capacity change from 34359734272 to 38654701568
[ 1000.012751] EXT4-fs (dm-5): resizing filesystem from 4294966784 to 4831837696 blocks
[ 1000.012878] EXT4-fs (dm-5): resized filesystem to 4294967296
=== after ===
[ 129.104898] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 143.773630] dm-4: detected capacity change from 34359738368 to 38654705664
[ 198.203246] dm-5: detected capacity change from 34359734272 to 38654701568
[ 207.918603] EXT4-fs (dm-5): resizing filesystem from 4294966784 to 4831837696 blocks
[ 207.918754] EXT4-fs (dm-5): resizing filesystem from 4294967296 to 4831837696 blocks
[ 207.918758] EXT4-fs (dm-5): Converting file system to meta_bg
[ 207.918790] EXT4-fs (dm-5): resizing filesystem from 4294967296 to 4831837696 blocks
[ 221.454050] EXT4-fs (dm-5): resized to 4658298880 blocks
[ 227.634613] EXT4-fs (dm-5): resized filesystem to 4831837696
Signed-off-by: Jerry Lee <jerrylee@qnap.com>
Link: https://lore.kernel.org/r/PU1PR04MB22635E739BD21150DC182AC6A18C9@PU1PR04MB2263.apcprd04.prod.outlook.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In commit 19e8b701e2 ("a.out: Stop building a.out/osf1 support on
alpha and m68k") the last users of a.out were disabled.
As nothing has turned up to cause this change to be reverted, let's
remove the code implementing a.out support as well.
There may be userspace users of the uapi bits left so the uapi
headers have been left untouched.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Arnd Bergmann <arnd@arndb.de> # arm defconfigs
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/871qrx3hq3.fsf@email.froward.int.ebiederm.org
The name of this function looks not very accurate compared to it's
implementation and it's only a wrapper to erofs_read_metabuf(). So,
let's fold it directly instead.
Signed-off-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220927032518.25266-1-zbestahu@gmail.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Patch series "ksm: count allocated rmap_items and update documentation",
v5.
KSM can save memory by merging identical pages, but also can consume
additional memory, because it needs to generate rmap_items to save each
scanned page's brief rmap information.
To determine how beneficial the ksm-policy (like madvise), they are using
brings, so we add a new interface /proc/<pid>/ksm_stat for each process
The value "ksm_rmap_items" in it indicates the total allocated ksm
rmap_items of this process.
The detailed description can be seen in the following patches' commit
message.
This patch (of 2):
KSM can save memory by merging identical pages, but also can consume
additional memory, because it needs to generate rmap_items to save each
scanned page's brief rmap information. Some of these pages may be merged,
but some may not be abled to be merged after being checked several times,
which are unprofitable memory consumed.
The information about whether KSM save memory or consume memory in
system-wide range can be determined by the comprehensive calculation of
pages_sharing, pages_shared, pages_unshared and pages_volatile. A simple
approximate calculation:
profit =~ pages_sharing * sizeof(page) - (all_rmap_items) *
sizeof(rmap_item);
where all_rmap_items equals to the sum of pages_sharing, pages_shared,
pages_unshared and pages_volatile.
But we cannot calculate this kind of ksm profit inner single-process wide
because the information of ksm rmap_item's number of a process is lacked.
For user applications, if this kind of information could be obtained, it
helps upper users know how beneficial the ksm-policy (like madvise) they
are using brings, and then optimize their app code. For example, one
application madvise 1000 pages as MERGEABLE, while only a few pages are
really merged, then it's not cost-efficient.
So we add a new interface /proc/<pid>/ksm_stat for each process in which
the value of ksm_rmap_itmes is only shown now and so more values can be
added in future.
So similarly, we can calculate the ksm profit approximately for a single
process by:
profit =~ ksm_merging_pages * sizeof(page) - ksm_rmap_items *
sizeof(rmap_item);
where ksm_merging_pages is shown at /proc/<pid>/ksm_merging_pages, and
ksm_rmap_items is shown in /proc/<pid>/ksm_stat.
Link: https://lkml.kernel.org/r/20220830143731.299702-1-xu.xin16@zte.com.cn
Link: https://lkml.kernel.org/r/20220830143838.299758-1-xu.xin16@zte.com.cn
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Reviewed-by: Xiaokai Ran <ran.xiaokai@zte.com.cn>
Reviewed-by: Yang Yang <yang.yang29@zte.com.cn>
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Izik Eidus <izik.eidus@ravellosystems.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Don't use the mm_struct linked list or the vma->vm_next in prep for
removal.
Link: https://lkml.kernel.org/r/20220906194824.2110408-45-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove references to mm_struct linked list and highest_vm_end for when
they are removed
Link: https://lkml.kernel.org/r/20220906194824.2110408-44-Liam.Howlett@oracle.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use the vma iterator instead of a for loop across the linked list. The
link list of vmas will be removed in this patch set.
Link: https://lkml.kernel.org/r/20220906194824.2110408-43-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove a use of the vm_next list by doing the initial lookup with the VMA
iterator and then using it to find the next entry.
Link: https://lkml.kernel.org/r/20220906194824.2110408-42-Liam.Howlett@oracle.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use the Maple Tree iterator instead. This is too complicated for the VMA
iterator to handle, so let's open-code it for now. If this turns out to
be a common pattern, we can migrate it to common code.
Link: https://lkml.kernel.org/r/20220906194824.2110408-41-Liam.Howlett@oracle.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
By using the maple tree and the maple tree state, the vmacache is no
longer beneficial and is complicating the VMA code. Remove the vmacache
to reduce the work in keeping it up to date and code complexity.
Link: https://lkml.kernel.org/r/20220906194824.2110408-26-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
These users of the rbtree should probably have been walks of the linked
list, but convert them to use walks of the maple tree.
Link: https://lkml.kernel.org/r/20220906194824.2110408-17-Liam.Howlett@oracle.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
To further exploit spatial locality, the aging prefers to walk page tables
to search for young PTEs and promote hot pages. A kill switch will be
added in the next patch to disable this behavior. When disabled, the
aging relies on the rmap only.
NB: this behavior has nothing similar with the page table scanning in the
2.4 kernel [1], which searches page tables for old PTEs, adds cold pages
to swapcache and unmaps them.
To avoid confusion, the term "iteration" specifically means the traversal
of an entire mm_struct list; the term "walk" will be applied to page
tables and the rmap, as usual.
An mm_struct list is maintained for each memcg, and an mm_struct follows
its owner task to the new memcg when this task is migrated. Given an
lruvec, the aging iterates lruvec_memcg()->mm_list and calls
walk_page_range() with each mm_struct on this list to promote hot pages
before it increments max_seq.
When multiple page table walkers iterate the same list, each of them gets
a unique mm_struct; therefore they can run concurrently. Page table
walkers ignore any misplaced pages, e.g., if an mm_struct was migrated,
pages it left in the previous memcg will not be promoted when its current
memcg is under reclaim. Similarly, page table walkers will not promote
pages from nodes other than the one under reclaim.
This patch uses the following optimizations when walking page tables:
1. It tracks the usage of mm_struct's between context switches so that
page table walkers can skip processes that have been sleeping since
the last iteration.
2. It uses generational Bloom filters to record populated branches so
that page table walkers can reduce their search space based on the
query results, e.g., to skip page tables containing mostly holes or
misplaced pages.
3. It takes advantage of the accessed bit in non-leaf PMD entries when
CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG=y.
4. It does not zigzag between a PGD table and the same PMD table
spanning multiple VMAs. IOW, it finishes all the VMAs within the
range of the same PMD table before it returns to a PGD table. This
improves the cache performance for workloads that have large
numbers of tiny VMAs [2], especially when CONFIG_PGTABLE_LEVELS=5.
Server benchmark results:
Single workload:
fio (buffered I/O): no change
Single workload:
memcached (anon): +[8, 10]%
Ops/sec KB/sec
patch1-7: 1147696.57 44640.29
patch1-8: 1245274.91 48435.66
Configurations:
no change
Client benchmark results:
kswapd profiles:
patch1-7
48.16% lzo1x_1_do_compress (real work)
8.20% page_vma_mapped_walk (overhead)
7.06% _raw_spin_unlock_irq
2.92% ptep_clear_flush
2.53% __zram_bvec_write
2.11% do_raw_spin_lock
2.02% memmove
1.93% lru_gen_look_around
1.56% free_unref_page_list
1.40% memset
patch1-8
49.44% lzo1x_1_do_compress (real work)
6.19% page_vma_mapped_walk (overhead)
5.97% _raw_spin_unlock_irq
3.13% get_pfn_folio
2.85% ptep_clear_flush
2.42% __zram_bvec_write
2.08% do_raw_spin_lock
1.92% memmove
1.44% alloc_zspage
1.36% memset
Configurations:
no change
Thanks to the following developers for their efforts [3].
kernel test robot <lkp@intel.com>
[1] https://lwn.net/Articles/23732/
[2] https://llvm.org/docs/ScudoHardenedAllocator.html
[3] https://lore.kernel.org/r/202204160827.ekEARWQo-lkp@intel.com/
Link: https://lkml.kernel.org/r/20220918080010.2920238-9-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Evictable pages are divided into multiple generations for each lruvec.
The youngest generation number is stored in lrugen->max_seq for both
anon and file types as they are aged on an equal footing. The oldest
generation numbers are stored in lrugen->min_seq[] separately for anon
and file types as clean file pages can be evicted regardless of swap
constraints. These three variables are monotonically increasing.
Generation numbers are truncated into order_base_2(MAX_NR_GENS+1) bits
in order to fit into the gen counter in folio->flags. Each truncated
generation number is an index to lrugen->lists[]. The sliding window
technique is used to track at least MIN_NR_GENS and at most
MAX_NR_GENS generations. The gen counter stores a value within [1,
MAX_NR_GENS] while a page is on one of lrugen->lists[]. Otherwise it
stores 0.
There are two conceptually independent procedures: "the aging", which
produces young generations, and "the eviction", which consumes old
generations. They form a closed-loop system, i.e., "the page reclaim".
Both procedures can be invoked from userspace for the purposes of working
set estimation and proactive reclaim. These techniques are commonly used
to optimize job scheduling (bin packing) in data centers [1][2].
To avoid confusion, the terms "hot" and "cold" will be applied to the
multi-gen LRU, as a new convention; the terms "active" and "inactive" will
be applied to the active/inactive LRU, as usual.
The protection of hot pages and the selection of cold pages are based
on page access channels and patterns. There are two access channels:
one through page tables and the other through file descriptors. The
protection of the former channel is by design stronger because:
1. The uncertainty in determining the access patterns of the former
channel is higher due to the approximation of the accessed bit.
2. The cost of evicting the former channel is higher due to the TLB
flushes required and the likelihood of encountering the dirty bit.
3. The penalty of underprotecting the former channel is higher because
applications usually do not prepare themselves for major page
faults like they do for blocked I/O. E.g., GUI applications
commonly use dedicated I/O threads to avoid blocking rendering
threads.
There are also two access patterns: one with temporal locality and the
other without. For the reasons listed above, the former channel is
assumed to follow the former pattern unless VM_SEQ_READ or VM_RAND_READ is
present; the latter channel is assumed to follow the latter pattern unless
outlying refaults have been observed [3][4].
The next patch will address the "outlying refaults". Three macros, i.e.,
LRU_REFS_WIDTH, LRU_REFS_PGOFF and LRU_REFS_MASK, used later are added in
this patch to make the entire patchset less diffy.
A page is added to the youngest generation on faulting. The aging needs
to check the accessed bit at least twice before handing this page over to
the eviction. The first check takes care of the accessed bit set on the
initial fault; the second check makes sure this page has not been used
since then. This protocol, AKA second chance, requires a minimum of two
generations, hence MIN_NR_GENS.
[1] https://dl.acm.org/doi/10.1145/3297858.3304053
[2] https://dl.acm.org/doi/10.1145/3503222.3507731
[3] https://lwn.net/Articles/495543/
[4] https://lwn.net/Articles/815342/
Link: https://lkml.kernel.org/r/20220918080010.2920238-6-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We've got a bunch of special swap entries that stores PFN inside the swap
offset fields. To fetch the PFN, normally the user just calls
swp_offset() assuming that'll be the PFN.
Add a helper swp_offset_pfn() to fetch the PFN instead, fetching only the
max possible length of a PFN on the host, meanwhile doing proper check
with MAX_PHYSMEM_BITS to make sure the swap offsets can actually store the
PFNs properly always using the BUILD_BUG_ON() in is_pfn_swap_entry().
One reason to do so is we never tried to sanitize whether swap offset can
really fit for storing PFN. At the meantime, this patch also prepares us
with the future possibility to store more information inside the swp
offset field, so assuming "swp_offset(entry)" to be the PFN will not stand
any more very soon.
Replace many of the swp_offset() callers to use swp_offset_pfn() where
proper. Note that many of the existing users are not candidates for the
replacement, e.g.:
(1) When the swap entry is not a pfn swap entry at all, or,
(2) when we wanna keep the whole swp_offset but only change the swp type.
For the latter, it can happen when fork() triggered on a write-migration
swap entry pte, we may want to only change the migration type from
write->read but keep the rest, so it's not "fetching PFN" but "changing
swap type only". They're left aside so that when there're more
information within the swp offset they'll be carried over naturally in
those cases.
Since at it, dropping hwpoison_entry_to_pfn() because that's exactly what
the new swp_offset_pfn() is about.
Link: https://lkml.kernel.org/r/20220811161331.37055-4-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
cycle, 18 are for earlier issues, and are cc:stable.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYzH+NgAKCRDdBJ7gKXxA
ju4AAQDrFWErVp+ra5P66SSbiFmm8NAW1awt4nHwAPcihNf3yQD/eQcB3w2q0Dm1
9HjsyEVkTYIeaJSAbCraDnMwUdWTIgY=
=p5+0
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2022-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull last (?) hotfixes from Andrew Morton:
"26 hotfixes.
8 are for issues which were introduced during this -rc cycle, 18 are
for earlier issues, and are cc:stable"
* tag 'mm-hotfixes-stable-2022-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (26 commits)
x86/uaccess: avoid check_object_size() in copy_from_user_nmi()
mm/page_isolation: fix isolate_single_pageblock() isolation behavior
mm,hwpoison: check mm when killing accessing process
mm/hugetlb: correct demote page offset logic
mm: prevent page_frag_alloc() from corrupting the memory
mm: bring back update_mmu_cache() to finish_fault()
frontswap: don't call ->init if no ops are registered
mm/huge_memory: use pfn_to_online_page() in split_huge_pages_all()
mm: fix madivse_pageout mishandling on non-LRU page
powerpc/64s/radix: don't need to broadcast IPI for radix pmd collapse flush
mm: gup: fix the fast GUP race against THP collapse
mm: fix dereferencing possible ERR_PTR
vmscan: check folio_test_private(), not folio_get_private()
mm: fix VM_BUG_ON in __delete_from_swap_cache()
tools: fix compilation after gfp_types.h split
mm/damon/dbgfs: fix memory leak when using debugfs_lookup()
mm/migrate_device.c: copy pte dirty bit to page
mm/migrate_device.c: add missing flush_cache_page()
mm/migrate_device.c: flush TLB while holding PTL
x86/mm: disable instrumentations of mm/pgprot.c
...
forgotten to apply before the last pull request for ext4. My bad.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmMx4H8ACgkQ8vlZVpUN
gaPSMwgAij3HAydTOXKBpiMW426I+GhhQCeKzud2uPs74gB3ikfh0YizJe520dpH
ffFAnItLAGChcO+vRpYSJumFKQJpCu+bb/6lOJ2oVBhoASPBlNNxVmSsyqcNMmaI
HGmvPgwcAhzeaaAFzkhzcpeEdygldUGClekRwvjLqYyj6i9EfwHkPBVzMn/9sSNk
Pasp3AhEH5c2IhR9JnH7VvNDCIVBnIqapKsiyysBs1cjEvs5wCLAm3PhgKrjGERR
RUvirl5jbTAAxRxdyiBppVSsbj10lLD+knKSxdnoJ+X7jiZp7ktEcCI+DVdwt5Cd
NmfwlVJxQ91lq90FBsJyB6lzU5e69g==
=GEOG
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull missed ext4 fix from Ted Ts'o:
"Fix an potential unitialzied variable bug; this was a fixup that I had
forgotten to apply before the last pull request for ext4. My bad"
* tag 'ext4_for_linus_fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fixup possible uninitialized variable access in ext4_mb_choose_next_group_cr1()
__bitmap_weight() is not to be used directly in the kernel code because
it's a helper for bitmap_weight(). Switch everything to bitmap_weight().
Signed-off-by: Yury Norov <yury.norov@gmail.com>
We've had some reports of problems in the refcounting for delegation
stateids that we've yet to track down. Add some extra checks to ensure
that we've removed the object from various lists before freeing it.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2127067
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
queue_work can return false and not queue anything, if the work is
already queued. If that happens in the case of a CB_RECALL, we'll have
taken an extra reference to the stid that will never be put. Ensure we
throw a warning in that case.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
In the case of a revoked delegation, we still fill out the pointer even
when returning an error, which is bad form. Only overwrite the pointer
on success.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Use-after-free occurred when the laundromat tried to free expired
cpntf_state entry on the s2s_cp_stateids list after inter-server
copy completed. The sc_cp_list that the expired copy state was
inserted on was already freed.
When COPY completes, the Linux client normally sends LOCKU(lock_state x),
FREE_STATEID(lock_state x) and CLOSE(open_state y) to the source server.
The nfs4_put_stid call from nfsd4_free_stateid cleans up the copy state
from the s2s_cp_stateids list before freeing the lock state's stid.
However, sometimes the CLOSE was sent before the FREE_STATEID request.
When this happens, the nfsd4_close_open_stateid call from nfsd4_close
frees all lock states on its st_locks list without cleaning up the copy
state on the sc_cp_list list. When the time the FREE_STATEID arrives the
server returns BAD_STATEID since the lock state was freed. This causes
the use-after-free error to occur when the laundromat tries to free
the expired cpntf_state.
This patch adds a call to nfs4_free_cpntf_statelist in
nfsd4_close_open_stateid to clean up the copy state before calling
free_ol_stateid_reaplist to free the lock state's stid on the reaplist.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Since before the git era, NFSD has conserved the number of pages
held by each nfsd thread by combining the RPC receive and send
buffers into a single array of pages. This works because there are
no cases where an operation needs a large RPC Call message and a
large RPC Reply at the same time.
Once an RPC Call has been received, svc_process() updates
svc_rqst::rq_res to describe the part of rq_pages that can be
used for constructing the Reply. This means that the send buffer
(rq_res) shrinks when the received RPC record containing the RPC
Call is large.
Add an NFSv4 helper that computes the size of the send buffer. It
replaces svc_max_payload() in spots where svc_max_payload() returns
a value that might be larger than the remaining send buffer space.
Callers who need to know the transport's actual maximum payload size
will continue to use svc_max_payload().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Code maintenance: The name of the copy_stateid_t::sc_count field
collides with the sc_count field in struct nfs4_stid, making the
latter difficult to grep for when auditing stateid reference
counting.
No behavior change expected.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code.
Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code.
nfsd_net is converted from seq_file->file instead of seq_file->private in
nfsd_reply_cache_stats_show().
Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
[ cel: reduce line length ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code.
inode is converted from seq_file->file instead of seq_file->private in
client_info_show().
Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code.
Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
[ cel: reduce line length ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Use DEFINE_PROC_SHOW_ATTRIBUTE helper macro to simplify the code.
Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This field was added by commit 1091006c5e ("nfsd: turn on reply
cache for NFSv4") but was never put to use.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
These helpers are always invoked indirectly, so the compiler can't
inline these anyway. While we're updating the synopses of these
helpers, defensively convert their parameters to const pointers.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
In today's Linux NFS server implementation, the NFS dispatcher
initializes each XDR result stream, and the NFSv4 .pc_func and
.pc_encode methods all use xdr_stream-based encoding. This keeps
rq_res.len automatically updated. There is no longer a need for
the WARN_ON_ONCE() check in nfs4svc_encode_compoundres().
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
xdr_stream_subsegment() already returns a boolean value.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Replace the check for buffer over/underflow with a helper that is
commonly used for this purpose. The helper also sets xdr->nwords
correctly after successfully linearizing the symlink argument into
the stream's scratch buffer.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The dust has settled a bit and it's become obvious what code is
totally common between nfsd_init_dirlist_pages() and
nfsd3_init_dirlist_pages(). Move that common code to SUNRPC.
The new helper brackets the existing xdr_init_decode_pages() API.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Have SunRPC clear everything except for the iops array. Then have
each NFSv4 XDR decoder clear it's own argument before decoding.
Now individual operations may have a large argument struct while not
penalizing the vast majority of operations with a small struct.
And, clearing the argument structure occurs as the argument fields
are initialized, enabling the CPU to do write combining on that
memory. In some cases, clearing is not even necessary because all
of the fields in the argument structure are initialized by the
decoder.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Currently, SUNRPC clears the whole of .pc_argsize before processing
each incoming RPC transaction. Add an extra parameter to struct
svc_procedure to enable upper layers to reduce the amount of each
operation's argument structure that is zeroed by SUNRPC.
The size of struct nfsd4_compoundargs, in particular, is a lot to
clear on each incoming RPC Call. A subsequent patch will cut this
down to something closer to what NFSv2 and NFSv3 uses.
This patch should cause no behavior changes.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add courtesy_client_reaper to react to low memory condition triggered
by the system memory shrinker.
The delayed_work for the courtesy_client_reaper is scheduled on
the shrinker's count callback using the laundry_wq.
The shrinker's scan callback is not used for expiring the courtesy
clients due to potential deadlocks.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add counter nfs4_courtesy_client_count to nfsd_net to keep track
of the number of courtesy clients in the system.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This was discussed with Chuck as part of this patch set. Returning
nfserr_resource was decided to not be the best error message here, and
he suggested changing to nfserr_serverfault instead.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Link: https://lore.kernel.org/linux-nfs/20220907195259.926736-1-anna@kernel.org/T/#t
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
nfsd_unlink() can kick off a CB_RECALL (via
vfs_unlink() -> leases_conflict()) if a delegation is present.
Before returning NFS4ERR_DELAY, give the client holding that
delegation a chance to return it and then retry the nfsd_unlink()
again, once.
Link: https://bugzilla.linux-nfs.org/show_bug.cgi?id=354
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
nfsd_rename() can kick off a CB_RECALL (via
vfs_rename() -> leases_conflict()) if a delegation is present.
Before returning NFS4ERR_DELAY, give the client holding that
delegation a chance to return it and then retry the nfsd_rename()
again, once.
This version of the patch handles renaming an existing file,
but does not deal with renaming onto an existing file. That
case will still always trigger an NFS4ERR_DELAY.
Link: https://bugzilla.linux-nfs.org/show_bug.cgi?id=354
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
nfsd_setattr() can kick off a CB_RECALL (via
notify_change() -> break_lease()) if a delegation is present. Before
returning NFS4ERR_DELAY, give the client holding that delegation a
chance to return it and then retry the nfsd_setattr() again, once.
Link: https://bugzilla.linux-nfs.org/show_bug.cgi?id=354
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Move code that will be retried (in a subsequent patch) into a helper
function.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Subsequent patches will use this mechanism to wake up an operation
that is waiting for a client to return a delegation.
The new tracepoint records whether the wait timed out or was
properly awoken by the expected DELEGRETURN:
nfsd-1155 [002] 83799.493199: nfsd_delegret_wakeup: xid=0x14b7d6ef fh_hash=0xf6826792 (timed out)
Suggested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Wireshark has always been lousy about dissecting NFSv4 callbacks,
especially NFSv4.0 backchannel requests. Add tracepoints so we
can surgically capture these events in the trace log.
Tracepoints are time-stamped and ordered so that we can now observe
the timing relationship between a CB_RECALL Reply and the client's
DELEGRETURN Call. Example:
nfsd-1153 [002] 211.986391: nfsd_cb_recall: addr=192.168.1.67:45767 client 62ea82e4:fee7492a stateid 00000003:00000001
nfsd-1153 [002] 212.095634: nfsd_compound: xid=0x0000002c opcnt=2
nfsd-1153 [002] 212.095647: nfsd_compound_status: op=1/2 OP_PUTFH status=0
nfsd-1153 [002] 212.095658: nfsd_file_put: hash=0xf72 inode=0xffff9291148c7410 ref=3 flags=HASHED|REFERENCED may=READ file=0xffff929103b3ea00
nfsd-1153 [002] 212.095661: nfsd_compound_status: op=2/2 OP_DELEGRETURN status=0
kworker/u25:8-148 [002] 212.096713: nfsd_cb_recall_done: client 62ea82e4:fee7492a stateid 00000003:00000001 status=0
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
The Linux NFSv4 client implementation does not use COMPOUND tags,
but the Solaris and MacOS implementations do, and so does pynfs.
Record these eye-catchers in the server's trace buffer to annotate
client requests while troubleshooting.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Record permission errors in the trace log. Note that the new trace
event is conditional, so it will only record non-zero return values
from nfsd_permission().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
nfsd4_prepare_cb_recall() has been removed since
commit 0162ac2b97 ("nfsd: introduce nfsd4_callback_ops"),
so remove it.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
We only need the inode number for this, not a full rack of attributes.
Rename this function make it take a pointer to a u64 instead of
struct kstat, and change it to just request STATX_INO.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
[ cel: renamed get_mounted_on_ino() ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
If an NFS server returns NFS4ERR_RESOURCE on the first operation in
an NFSv4 COMPOUND, there's no way for a client to know where the
problem is and then simplify the compound to make forward progress.
So instead, make NFSD process as many operations in an oversized
COMPOUND as it can and then return NFS4ERR_RESOURCE on the first
operation it did not process.
pynfs NFSv4.0 COMP6 exercises this case, but checks only for the
COMPOUND status code, not whether the server has processed any
of the operations.
pynfs NFSv4.1 SEQ6 and SEQ7 exercise the NFSv4.1 case, which detects
too many operations per COMPOUND by checking against the limits
negotiated when the session was created.
Suggested-by: Bruce Fields <bfields@fieldses.org>
Fixes: 0078117c6d ("nfsd: return RESOURCE not GARBAGE_ARGS on too many ops")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
nfsd_create_locked() does not use the "fname" and "flen" arguments, so
drop them from declaration and all callers.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Christian Brauner
Gao Xiang