Each occurrence of the term "usb2" within variables, function names,
comments, etc. is changed to "usb" where it is shared for all
esd CAN/USB devices.
Link: https://lore.kernel.org/all/20220624190517.2299701-4-frank.jungclaus@esd.eu
Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
As suggested by Vincent, renaming of esd_usb2.c to esd_usb.c
and according to that, adaption of Kconfig and Makfile, too.
Link: https://lore.kernel.org/all/20220624190517.2299701-2-frank.jungclaus@esd.eu
Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch is similar to 7e193a42c3 ("can: netlink: allow
configuring of fixed bit rates without need for do_set_bittiming
callback") but for data bit rates instead of bit rates.
Usually CAN devices support configurable data bit rates. The limits
are defined by struct can_priv::data_bittiming_const. Another way is
to implement the struct can_priv::do_set_data_bittiming callback.
If the bit rate is configured via netlink, the can_changelink()
function checks that either can_priv::data_bittiming_const or struct
can_priv::do_set_data_bittiming is implemented.
In commit 431af77925 ("can: dev: add CAN interface API for fixed
bitrates") an API for configuring bit rates on CAN interfaces that
only support fixed bit rates was added. The supported bit rates are
defined by struct can_priv::bitrate_const.
However the above mentioned commit forgot to add the struct
can_priv::data_bitrate_const to the check in can_changelink().
In order to avoid to implement a no-op can_priv::do_set_data_bittiming
callback on devices with fixed data bit rates, extend the check in
can_changelink() accordingly.
Link: https://lore.kernel.org/all/20220613143633.4151884-1-mkl@pengutronix.de
Fixes: 431af77925 ("can: dev: add CAN interface API for fixed bitrates")
Acked-by: Max Staudt <max@enpas.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
PolarFire SoC has a pair of CAN controllers, but as they were
undocumented there were omitted from the device tree. Add them.
Link: https://lore.kernel.org/all/20220607065459.2035746-3-conor.dooley@microchip.com
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Vincent Mailhol says:
====================
This series contains two clean up patches toward struct es58x_device
of the CAN etas_es58x driver. The first one removes the field
rx_max_packet_size which value can actually be retrieved from the
helper function usb_maxpacket(). The second one fixes the signedness
of the TX and RX pipes.
No functional changes.
====================
Link: https://lore.kernel.org/all/20220611162037.1507-1-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The field rx_max_packet_size of struct es58x_device in nothing else
than usb_endpoint_descriptor::wMaxPacketSize and can be easily
retrieved using usb_maxpacket(). Also, rx_max_packet_size being used a
single time, there is no merit to cache it locally.
Remove es58x_device::rx_max_packet_size and rely on usb_maxpacket()
instead.
Link: https://lore.kernel.org/all/20220611162037.1507-2-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
There are two sections called "Local Loopback of Sent Frames". One was
meant to link to the other, but pointed at itself instead.
Link: https://lore.kernel.org/all/20220611171155.9090-1-max@enpas.org
Fixes: 7d59773945 ("can: migrate documentation to restructured text")
Signed-off-by: Max Staudt <max@enpas.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Vincent Mailhol says
====================
Aside of calc_bittiming.o which can be configured with
CAN_CALC_BITTIMING, all objects from drivers/net/can/dev/ get linked
unconditionally to can-dev.o even if not needed by the user.
This series first goal it to split the can-dev modules so that the
only the needed features get built in during compilation.
Additionally, the CAN Device Drivers menu is moved from the
"Networking support" category to the "Device Drivers" category (where
all drivers are supposed to be).
* menu before this series *
CAN bus subsystem support
symbol: CONFIG_CAN
|
+-> CAN Device Drivers
(no symbol)
|
+-> software/virtual CAN device drivers
| (at time of writing: slcan, vcan, vxcan)
|
+-> Platform CAN drivers with Netlink support
symbol: CONFIG_CAN_DEV
|
+-> CAN bit-timing calculation (optional for hardware drivers)
| symbol: CONFIG_CAN_CALC_BITTIMING
|
+-> All other CAN devices drivers
* menu after this series *
Network device support
symbol: CONFIG_NETDEVICES
|
+-> CAN Device Drivers
symbol: CONFIG_CAN_DEV
|
+-> software/virtual CAN device drivers
| (at time of writing: slcan, vcan, vxcan)
|
+-> CAN device drivers with Netlink support
symbol: CONFIG_CAN_NETLINK (matches previous CONFIG_CAN_DEV)
|
+-> CAN bit-timing calculation (optional for all drivers)
| symbol: CONFIG_CAN_CALC_BITTIMING
|
+-> All other CAN devices drivers
(some may select CONFIG_CAN_RX_OFFLOAD)
|
+-> CAN rx offload (automatically selected by some drivers)
(hidden symbol: CONFIG_CAN_RX_OFFLOAD)
Patches 1 to 5 of this series do above modification.
The last two patches add a check toward CAN_CTRLMODE_LISTENONLY in
can_dropped_invalid_skb() to discard tx skb (such skb can potentially
reach the driver if injected via the packet socket). In more details,
patch 6 moves can_dropped_invalid_skb() from skb.h to skb.o and patch
7 is the actual change.
Those last two patches are actually connected to the first five ones:
because slcan and v(x)can requires can_dropped_invalid_skb(), it was
necessary to add those three devices to the scope of can-dev before
moving the function to skb.o.
This design results from the lengthy discussion in [1].
[1] https://lore.kernel.org/linux-can/20220514141650.1109542-1-mailhol.vincent@wanadoo.fr/
** Changelog **
v5 -> v6:
* fix typo in patch #1's title: Kbuild -> Kconfig.
* make CONFIG_RX_CAN an hidden config symbol and modify the diagram
in the cover letter accordingly.
@Oliver, with CONFIG_CAN_RX_OFFLOAD now being an hidden config,
that option fully depends on the drivers. So contrary to your
suggestion, I put CONFIG_CAN_RX_OFFLOAD below the device drivers
in the diagram.
* fix typo in cover letter: CONFIG_CAN_BITTIMING -> CONFIG_CAN_CALC_BITTIMING.
v4 -> v5:
* m_can is also requires RX offload. Add the "select CAN_RX_OFFLOAD"
to its Makefile.
* Reorder the lines of drivers/net/can/dev/Makefile.
* Remove duplicated rx-offload.o target in drivers/net/can/dev/Makefile
* Remove the Nota Bene in the cover letter.
v3 -> v4:
* Five additional patches added to split can-dev module and refactor
Kbuild. c.f. below (lengthy) thread:
https://lore.kernel.org/linux-can/20220514141650.1109542-1-mailhol.vincent@wanadoo.fr/
v2 -> v3:
* Apply can_dropped_invalid_skb() to slcan.
* Make vcan, vxcan and slcan dependent of CONFIG_CAN_DEV by
modifying Kbuild.
* fix small typos.
v1 -> v2:
* move can_dropped_invalid_skb() to skb.c instead of dev.h
* also move can_skb_headroom_valid() to skb.c
====================
Link: https://lore.kernel.org/all/20220610143009.323579-1-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Frames can be directly injected to a can driver via the packet
socket. By doing so, it is possible to reach the
net_device_ops::ndo_start_xmit function even if the driver is
configured in listen only mode.
Add a check in can_dropped_invalid_skb() to discard the skb if
CAN_CTRLMODE_LISTENONLY is set.
Link: https://lore.kernel.org/all/20220610143009.323579-8-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Acked-by: Max Staudt <max@enpas.org>
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The functions can_dropped_invalid_skb() and can_skb_headroom_valid()
grew a lot over the years to a point which it does not make much sense
to have them defined as static inline in header files. Move those two
functions to the .c counterpart of skb.h.
can_skb_headroom_valid()'s only caller being
can_dropped_invalid_skb(), the declaration is removed from the
header. Only can_dropped_invalid_skb() gets its symbol exported.
While doing so, do a small cleanup: add brackets around the else block
in can_dropped_invalid_skb().
Link: https://lore.kernel.org/all/20220610143009.323579-7-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Max Staudt <max@enpas.org>
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The devices are meant to be under the "Device Drivers" category of the
menuconfig. The CAN subsystem is currently one of the rare exception
with all of its devices under the "Networking support" category.
The CAN_DEV menuentry gets moved to fix this discrepancy. The CAN menu
is added just before MCTP in order to be consistent with the current
order under the "Networking support" menu.
A dependency on CAN is added to CAN_DEV so that the CAN devices only
show up if the CAN subsystem is enabled.
Link: https://lore.kernel.org/all/20220610143009.323579-6-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Acked-by: Max Staudt <max@enpas.org>
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Only a few drivers rely on the CAN rx offload framework (as of the
writing of this patch, only four: flexcan, m_can, mcp251xfd and
ti_hecc). Split it out of can-dev and add a new config symbol:
CAN_RX_OFFLOAD.
The drivers relying on CAN rx offload are in different sub
folders. Make CAN_RX_OFFLOAD an hidden option and tag all the drivers
depending on that feature with "select CAN_RX_OFFLOAD" so that the
option gets automatically enabled if and only if one of those drivers
is chosen.
Link: https://lore.kernel.org/all/20220610143009.323579-5-mailhol.vincent@wanadoo.fr
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Acked-by: Max Staudt <max@enpas.org>
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The canonical way to select or deselect an object during compilation
is to use this pattern in the relevant Makefile:
bar-$(CONFIG_FOO) := foo.o
bittiming.c instead uses some #ifdef CONFIG_CAN_CALC_BITTIMG.
Create a new file named calc_bittiming.c with all the functions which
are conditionally compiled with CONFIG_CAN_CALC_BITTIMG and modify the
Makefile according to above pattern.
Link: https://lore.kernel.org/all/20220610143009.323579-4-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Acked-by: Max Staudt <max@enpas.org>
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In the next patches, the software/virtual drivers (slcan, v(x)can)
will depend on drivers/net/can/dev/skb.o.
This patch changes the scope of the can-dev module to include the
above mentioned drivers.
To do so, we reuse the menu "CAN Device Drivers" and turn it into a
configmenu using the config symbol CAN_DEV (which we released in
previous patch). Also, add a description to this new CAN_DEV
menuconfig.
The symbol CAN_DEV now only triggers the build of skb.o. For this
reasons, all the macros from linux/module.h are deported from
drivers/net/can/dev/dev.c to drivers/net/can/dev/skb.c.
Finally, drivers/net/can/dev/Makefile is adjusted accordingly.
Link: https://lore.kernel.org/all/20220610143009.323579-3-mailhol.vincent@wanadoo.fr
Suggested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Acked-by: Max Staudt <max@enpas.org>
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In the next patches, the scope of the can-dev module will grow to
engloble the software/virtual drivers (slcan, v(x)can). To this
extent, release CAN_DEV by renaming it into CAN_NETLINK. The config
symbol CAN_DEV will be reused to cover this extended scope.
The rationale for the name CAN_NETLINK is that netlink is the
predominant feature added here.
The current description only mentions platform drivers despite the
fact that this symbol is also required by "normal" devices (e.g. USB
or PCI) which do not fall under the platform devices category. The
description is updated accordingly to fix this gap.
Link: https://lore.kernel.org/all/20220610143009.323579-2-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Acked-by: Max Staudt <max@enpas.org>
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Usually CAN devices support configurable bit rates. The limits are
defined by struct can_priv::bittiming_const. Another way is to
implement the struct can_priv::do_set_bittiming callback.
If the bit rate is configured via netlink, the can_changelink()
function checks that either can_priv::bittiming_const or struct
can_priv::do_set_bittiming is implemented.
In commit 431af77925 ("can: dev: add CAN interface API for fixed
bitrates") an API for configuring bit rates on CAN interfaces that
only support fixed bit rates was added. The supported bit rates are
defined by struct can_priv::bitrate_const.
However the above mentioned commit forgot to add the struct
can_priv::bitrate_const to the check in can_changelink().
In order to avoid to implement a no-op can_priv::do_set_bittiming
callback on devices with fixed bit rates, extend the check in
can_changelink() accordingly.
Link: https://lore.kernel.org/all/20220611144248.3924903-1-mkl@pengutronix.de
Fixes: 431af77925 ("can: dev: add CAN interface API for fixed bitrates")
Reported-by: Max Staudt <max@enpas.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch adds Transmitter Delay Compensation (TDC) feature support.
In the case of higher measured loop delay with higher bit rates, bit
stuff errors are observed. Enabling the TDC feature in CAN-FD
controllers will compensate for the measured loop delay in the receive
path.
Link: https://lore.kernel.org/all/20220609103157.1425730-1-srinivas.neeli@xilinx.com
Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
[mkl: fix indention]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Previously the traffic class field is ignored while firmware has
already supported to pedit flowinfo fields, including traffic
class and flow label, now add it back.
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Link: https://lore.kernel.org/r/20220609080136.151830-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The commit a14857c27a ("rtnetlink: verify rate parameters for calls to
ndo_set_vf_rate") has been merged to master, so we can to remove the
now-duplicate checks in drivers.
Signed-off-by: Bin Chen <bin.chen@corigine.com>
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20220609084717.155154-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
10GbE Intel Wired LAN Driver Updates 2022-06-09
Maximilian Heyne adds reporting of VF statistics on ixgbe via iproute2
interface.
Kai-Heng Feng removes duplicate defines from igb.
Jiaqing Zhao fixes typos in e1000, ixgb, and ixgbe drivers.
Julia Lawall fixes typos for fm10k, ixgbe, and ice drivers.
* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
drivers/net/ethernet/intel: fix typos in comments
ixgbe: Fix typos in comments
ixgb: Fix typos in comments
e1000: Fix typos in comments
igb: Remove duplicate defines
drivers, ixgbe: export vf statistics
====================
Link: https://lore.kernel.org/r/20220609171257.2727150-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
net: reduce tcp_memory_allocated inflation
Hosts with a lot of sockets tend to hit so called TCP memory pressure,
leading to very bad TCP performance and/or OOM.
The problem is that some TCP sockets can hold up to 2MB of 'forward
allocations' in their per-socket cache (sk->sk_forward_alloc),
and there is no mechanism to make them relinquish their share
under mem pressure.
Only under some potentially rare events their share is reclaimed,
one socket at a time.
In this series, I implemented a per-cpu cache instead of a per-socket one.
Each CPU has a +1/-1 MB (256 pages on x86) forward alloc cache, in order
to not dirty tcp_memory_allocated shared cache line too often.
We keep sk->sk_forward_alloc values as small as possible, to meet
memcg page granularity constraint.
Note that memcg already has a per-cpu cache, although MEMCG_CHARGE_BATCH
is defined to 32 pages, which seems a bit small.
Note that while this cover letter mentions TCP, this work is generic
and supports TCP, UDP, DECNET, SCTP.
====================
Link: https://lore.kernel.org/r/20220609063412.2205738-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These two helpers are only used from core networking.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, tcp_memory_allocated can hit tcp_mem[] limits quite fast.
Each TCP socket can forward allocate up to 2 MB of memory, even after
flow became less active.
10,000 sockets can have reserved 20 GB of memory,
and we have no shrinker in place to reclaim that.
Instead of trying to reclaim the extra allocations in some places,
just keep sk->sk_forward_alloc values as small as possible.
This should not impact performance too much now we have per-cpu
reserves: Changes to tcp_memory_allocated should not be too frequent.
For sockets not using SO_RESERVE_MEM:
- idle sockets (no packets in tx/rx queues) have zero forward alloc.
- non idle sockets have a forward alloc smaller than one page.
Note:
- Removal of SK_RECLAIM_CHUNK and SK_RECLAIM_THRESHOLD
is left to MPTCP maintainers as a follow up.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If sk->sk_forward_alloc is 150000, and we need to schedule 150001 bytes,
we want to allocate 1 byte more (rounded up to one page),
instead of 150001 :/
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We plan keeping sk->sk_forward_alloc as small as possible
in future patches.
This means we are going to call sk_memory_allocated_add()
and sk_memory_allocated_sub() more often.
Implement a per-cpu cache of +1/-1 MB, to reduce number
of changes to sk->sk_prot->memory_allocated, which
would otherwise be cause of false sharing.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Each protocol having a ->memory_allocated pointer gets a corresponding
per-cpu reserve, that following patches will use.
Instead of having reserved bytes per socket,
we want to have per-cpu reserves.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Due to memcg interface, SK_MEM_QUANTUM is effectively PAGE_SIZE.
This might change in the future, but it seems better to avoid the
confusion.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit bd68a2a854.
This change broke memcg on arches with PAGE_SIZE != 4096
Later, commit 2bb2f5fb21 ("net: add new socket option SO_RESERVE_MEM")
also assumed PAGE_SIZE==SK_MEM_QUANTUM
Following patches in the series will greatly reduce the over allocations
problem.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix CPUIDLE_FLAG_IRQ_ENABLE handling in intel_idle (Peter Zijlstra).
- Allow all platforms to use the global poweroff handler and make
non-syscall poweroff code paths work again (Dmitry Osipenko).
-----BEGIN PGP SIGNATURE-----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=2OMR
-----END PGP SIGNATURE-----
Merge tag 'pm-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix an intel_idle issue introduced during the 5.16 development
cycle and two recent regressions in the system reboot/poweroff code.
Specifics:
- Fix CPUIDLE_FLAG_IRQ_ENABLE handling in intel_idle (Peter Zijlstra)
- Allow all platforms to use the global poweroff handler and make
non-syscall poweroff code paths work again (Dmitry Osipenko)"
* tag 'pm-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle,intel_idle: Fix CPUIDLE_FLAG_IRQ_ENABLE
kernel/reboot: Fix powering off using a non-syscall code paths
kernel/reboot: Use static handler for register_platform_power_off()
There's a rule in certs/Makefile for which the command begins with eight
spaces. This results in:
../certs/Makefile:21: FORCE prerequisite is missing
../certs/Makefile:21: *** missing separator. Stop.
Fix this by turning the spaces into a tab.
Fixes: addf466389 ("certs: Check that builtin blacklist hashes are valid")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Mickaël Salaün <mic@linux.microsoft.com>
cc: keyrings@vger.kernel.org
Link: https://lore.kernel.org/r/486b1b80-9932-aab6-138d-434c541c934a@digikod.net/ # v1
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As Liviu pointed out, the arm,malidp-arqos-high-level property
mentioned in the original .txt binding was a mistake, and
arm,malidp-arqos-value needs to take its place.
The binding commit ce6eb0253c ("dt/bindings: display: Add optional
property node define for Mali DP500") mentions the right name in the
commit message, but has the wrong name in the diff.
Commit d298e6a27a ("drm/arm/mali-dp: Add display QoS interface
configuration for Mali DP500") uses the property in the driver, but uses
the shorter name.
Remove the wrong property from the binding, and use the proper name in
the example. The actual property was already documented properly.
Fixes: 2c8b082a3a ("dt-bindings: display: convert Arm Mali-DP to DT schema")
Link: https://lore.kernel.org/linux-arm-kernel/YnumGEilUblhBx8E@e110455-lin.cambridge.arm.com/
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reported-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220609162729.1441760-1-andre.przywara@arm.com
Merge fixes for regressions introduced by the recent rework of the
system reboot/poweroff code.
* pm-sysoff:
kernel/reboot: Fix powering off using a non-syscall code paths
kernel/reboot: Use static handler for register_platform_power_off()
There's no reason to list the same value twice in an 'enum'. This was fixed
treewide in commit c3b0068194 ("dt-bindings: Fix 'enum' lists with
duplicate entries"), but this one got added in the merge window.
A meta-schema change will catch future cases.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20220606212239.1360877-1-robh@kernel.org
more suitable location, adding loongarch to the features lists, and a
couple of typo fixes.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmKjf0MPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Yus0H/jUm48oqvWxk7T7V1TVJXkRACd/pq+7v+pbl
wgDTqjoqR4zxrUkdrZb+YAWXfnC+QKttxs1nWsZTXd5xyQ9w9pBHXEIPPNdmxHpI
5qa1dPWQrKuyULne01R2kPLUACZTpIBVZQ3tsO7LyJ6BwD295rZxXrsnKLwuYhfl
OmrS1oYhu/Gt9ROt3NbFDxs5PZjkwjiqjKohUAfqW8g2s1YsGVp0WeNplwx4zRZc
sgXHw3zSg81F/NeORhneEesJmqRqCUw5pYMNzJkRKjOAiO5DtD0HXHLLRKflX6+j
M5QlViO81BT7Rv8UiUJvXynIi5g6MPQ3EkjESERTVcH1JtRRZvo=
=Hy9U
-----END PGP SIGNATURE-----
Merge tag 'docs-5.19-3' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"A few documentation fixes for 5.19, including moving the new HTE docs
to a more suitable location, adding loongarch to the features lists,
and a couple of typo fixes"
* tag 'docs-5.19-3' of git://git.lwn.net/linux:
docs: arm: tcm: Fix typo in description of TCM and MMU usage
docs: Move the HTE documentation to driver-api/
docs: usb: fix literal block marker in usbmon verification example
Documentation/features: Update the arch support status files
- SME save/restore for EFI fix - incorrect logic for detecting the need
for saving/restoring the FFR state.
- SME fix for a CPU ID field value.
- Sysreg generation awk script fix (comparison operator).
- Some typos in documentation or comments and silence a sparse warning
(missing prototype).
-----BEGIN PGP SIGNATURE-----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=dll5
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- SME save/restore for EFI fix - incorrect logic for detecting the need
for saving/restoring the FFR state.
- SME fix for a CPU ID field value.
- Sysreg generation awk script fix (comparison operator).
- Some typos in documentation or comments and silence a sparse warning
(missing prototype).
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Add kasan_hw_tags_enable() prototype to silence sparse
arm64/sme: Fix EFI save/restore
arm64/fpsimd: Fix typo in comment
arm64/sysreg: Fix typo in Enum element regex
arm64/sme: Fix SVE/SME typo in ABI documentation
arm64/sme: Fix tests for 0b1111 value ID registers
* Fix handling of the explicit-open mount option, and in particular the
conditions under which this option can be ignored.
* Fix a problem with zonefs iomap_begin method, causing a hang in
iomap_readahead() when a readahead request reaches the end of a file.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCYqMh/wAKCRDdoc3SxdoY
dvd+AP4jNRFhAedXl0mIutoP4k0XwblSz9RwrXLOYzkOtgpXGQD+Lps42w6EQliE
wWuuL4syVgKamolj0WGcPLarGZC7LQA=
=neot
-----END PGP SIGNATURE-----
Merge tag 'zonefs-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs fixes from Damien Le Moal:
- Fix handling of the explicit-open mount option, and in particular the
conditions under which this option can be ignored.
- Fix a problem with zonefs iomap_begin method, causing a hang in
iomap_readahead() when a readahead request reaches the end of a file.
* tag 'zonefs-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: fix zonefs_iomap_begin() for reads
zonefs: Do not ignore explicit_open with active zone limit
zonefs: fix handling of explicit_open option on mount
Several small fixes for rc2:
* Remove unused field in struct ata_port, from Hannes.
* Fix a potential (very unlikely) NULL pointer dereference in
ata_host_alloc_pinfo(), from Sergey.
* Fix a device reference leak in the pata_octeon_cf driver, from
Miaoqian.
* Fixes for handling access to the concurrent positioning ranges log
page used with multi-actuator HDDs, from Tyler.
* Fix the values shown by the pio_mode and dma_mode sysfs device
attributes, from Sergey.
* Update the MAINTAINERS file to add libata sysfs ABI documentation
file, from Sergey.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCYqMjsAAKCRDdoc3SxdoY
dvS8AQDKFhvTnzQL/nIHWC5y0bsH4wF213g69SM79U7sPL2boQEAxczNR4RllIcT
yv4aAG1mk2+ii6ClqdC4m1EfpS1WtgI=
=fsTk
-----END PGP SIGNATURE-----
Merge tag 'ata-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ATA fixes from Damien Le Moal:
"Several small fixes for rc2:
- Remove unused field in struct ata_port (Hannes)
- Fix a potential (very unlikely) NULL pointer dereference in
ata_host_alloc_pinfo() (Sergey)
- Fix a device reference leak in the pata_octeon_cf driver (Miaoqian)
- Fixes for handling access to the concurrent positioning ranges log
page used with multi-actuator HDDs (Tyler)
- Fix the values shown by the pio_mode and dma_mode sysfs device
attributes (Sergey)
- Update the MAINTAINERS file to add libata sysfs ABI documentation
file (Sergey)"
* tag 'ata-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
MAINTAINERS: add ATA sysfs file documentation to libata entry
ata: libata-transport: fix {dma|pio|xfer}_mode sysfs files
libata: fix translation of concurrent positioning ranges
libata: fix reading concurrent positioning ranges log
ata: pata_octeon_cf: Fix refcount leak in octeon_cf_probe
ata: libata-core: fix NULL pointer deref in ata_host_alloc_pinfo()
ata: libata: drop 'sas_last_tag'
Here are a collection of fixes; almost all changes are device-specific
small fixes over ASoC, HD-audio and USB-audio. No sign of serious
breakage, so far.
-----BEGIN PGP SIGNATURE-----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=R4Du
-----END PGP SIGNATURE-----
Merge tag 'sound-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of fixes; almost all changes are device-specific small
fixes over ASoC, HD-audio and USB-audio. No sign of serious breakage,
so far"
* tag 'sound-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
ALSA: hda/realtek: Add quirk for HP Dev One
ALSA: hda/realtek - Add HW8326 support
ALSA: hda/conexant - Fix loopback issue with CX20632
ALSA: hda: MTL: add HD Audio PCI ID and HDMI codec vendor ID
ALSA: usb-audio: Set up (implicit) sync for Saffire 6
ALSA: usb-audio: Skip generic sync EP parse for secondary EP
ASoC: wm_adsp: Fix event generation for wm_adsp_fw_put()
ASoC: es8328: Fix event generation for deemphasis control
ASoC: wm8962: Fix suspend while playing music
ASoC: SOF: ipc-msg-injector: Fix reversed if statement
ASoC: SOF: ipc-msg-injector: Propagate write errors correctly
ASoC: fsl_sai: Add support for i.MX8MN
ASoC: SOF: Fix potential NULL pointer dereference
ALSA: hda/realtek: Fix for quirk to enable speaker output on the Lenovo Yoga DuetITL 2021
ASoC: cs42l51: Correct minimum value for SX volume control
ASoC: cs42l56: Correct typo in minimum level for SX volume controls
ASoC: cs42l52: Correct TLV for Bypass Volume
ASoC: cs53l30: Correct number of volume levels on SX controls
ASoC: cs35l36: Update digital volume TLV
ASoC: cs42l52: Fix TLV scales for mixer controls
...
amdgpu:
- DCN 3.1 golden settings fix
- eDP fixes
- DMCUB fixes
- GFX11 fixes and cleanups
- VCN fix for yellow carp
- GMC11 fixes
- RAS fixes
- GPUVM TLB flush fixes
- SMU13 fixes
- VCN3 AV1 regression fix
- VCN2 JPEG fix
- Other misc fixes
amdkfd:
- MMU notifier fix
- Support for more GC 10.3.x families
- Pinned BO handling fix
- Partial migration bug fix
panfrost:
- fix a use after free
ti-sn65dsi83:
- fix invalid DT configuration
panel:
- two self refresh fixes
ast:
- multiple output fix
-----BEGIN PGP SIGNATURE-----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=bT36
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2022-06-10' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Not a huge amount here, mainly a bunch of scattered amdgpu fixes, and
then some misc panfrost, bridge/panel ones, and one ast fix for
multi-monitors. Probably pick up a bit more next week like rc3 often
does.
amdgpu:
- DCN 3.1 golden settings fix
- eDP fixes
- DMCUB fixes
- GFX11 fixes and cleanups
- VCN fix for yellow carp
- GMC11 fixes
- RAS fixes
- GPUVM TLB flush fixes
- SMU13 fixes
- VCN3 AV1 regression fix
- VCN2 JPEG fix
- Other misc fixes
amdkfd:
- MMU notifier fix
- Support for more GC 10.3.x families
- Pinned BO handling fix
- Partial migration bug fix
panfrost:
- fix a use after free
ti-sn65dsi83:
- fix invalid DT configuration
panel:
- two self refresh fixes
ast:
- multiple output fix"
* tag 'drm-fixes-2022-06-10' of git://anongit.freedesktop.org/drm/drm: (37 commits)
drm/ast: Support multiple outputs
drm/amdgpu/mes: only invalid/prime icache when finish loading both pipe MES FWs.
drm/amdgpu/jpeg2: Add jpeg vmid update under IB submit
drm/amdgpu: always flush the TLB on gfx8
drm/amdgpu: fix limiting AV1 to the first instance on VCN3
drm/amdkfd:Fix fw version for 10.3.6
drm/amdgpu: Add MODE register to wave debug info in gfx11
Revert "drm/amd/display: Pass the new context into disable OTG WA"
Revert "drm/amdgpu: Ensure the DMA engine is deactivated during set ups"
drm/atomic: Force bridge self-refresh-exit on CRTC switch
drm/bridge: analogix_dp: Support PSR-exit to disable transition
drm/amdgpu: suppress the compile warning about 64 bit type
drm/amd/pm: suppress compile warnings about possible unaligned accesses
drm/amdkfd: Fix partial migration bugs
drm/amdkfd: add pinned BOs to kfd_bo_list
drm/amdgpu: Update PDEs flush TLB if PTB/PDB moved
drm/amdgpu: enable tmz by default for GC 10.3.7
drm/amdkfd: Add GC 10.3.6 and 10.3.7 KFD definitions
drm/amdkfd: Use mmget_not_zero in MMU notifier
drm/amdgpu: Resolve RAS GFX error count issue after cold boot on Arcturus
...
This function is only called from assembly, no need for a prototype
declaration in a header file. In addition, add #ifdef around the
function since it is only used when CONFIG_KASAN_HW_TAGS.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: kernel test robot <lkp@intel.com>
Frank Jungclaus