Pull networking updates from David Miller:
"Some highlights from this development cycle:
1) Big refactoring of ipv6 route and neigh handling to support
nexthop objects configurable as units from userspace. From David
Ahern.
2) Convert explored_states in BPF verifier into a hash table,
significantly decreased state held for programs with bpf2bpf
calls, from Alexei Starovoitov.
3) Implement bpf_send_signal() helper, from Yonghong Song.
4) Various classifier enhancements to mvpp2 driver, from Maxime
Chevallier.
5) Add aRFS support to hns3 driver, from Jian Shen.
6) Fix use after free in inet frags by allocating fqdirs dynamically
and reworking how rhashtable dismantle occurs, from Eric Dumazet.
7) Add act_ctinfo packet classifier action, from Kevin
Darbyshire-Bryant.
8) Add TFO key backup infrastructure, from Jason Baron.
9) Remove several old and unused ISDN drivers, from Arnd Bergmann.
10) Add devlink notifications for flash update status to mlxsw driver,
from Jiri Pirko.
11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski.
12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes.
13) Various enhancements to ipv6 flow label handling, from Eric
Dumazet and Willem de Bruijn.
14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van
der Merwe, and others.
15) Various improvements to axienet driver including converting it to
phylink, from Robert Hancock.
16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean.
17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana
Radulescu.
18) Add devlink health reporting to mlx5, from Moshe Shemesh.
19) Convert stmmac over to phylink, from Jose Abreu.
20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from
Shalom Toledo.
21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera.
22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel.
23) Track spill/fill of constants in BPF verifier, from Alexei
Starovoitov.
24) Support bounded loops in BPF, from Alexei Starovoitov.
25) Various page_pool API fixes and improvements, from Jesper Dangaard
Brouer.
26) Just like ipv4, support ref-countless ipv6 route handling. From
Wei Wang.
27) Support VLAN offloading in aquantia driver, from Igor Russkikh.
28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy.
29) Add flower GRE encap/decap support to nfp driver, from Pieter
Jansen van Vuuren.
30) Protect against stack overflow when using act_mirred, from John
Hurley.
31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen.
32) Use page_pool API in netsec driver, Ilias Apalodimas.
33) Add Google gve network driver, from Catherine Sullivan.
34) More indirect call avoidance, from Paolo Abeni.
35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan.
36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek.
37) Add MPLS manipulation actions to TC, from John Hurley.
38) Add sending a packet to connection tracking from TC actions, and
then allow flower classifier matching on conntrack state. From
Paul Blakey.
39) Netfilter hw offload support, from Pablo Neira Ayuso"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits)
net/mlx5e: Return in default case statement in tx_post_resync_params
mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync().
net: dsa: add support for BRIDGE_MROUTER attribute
pkt_sched: Include const.h
net: netsec: remove static declaration for netsec_set_tx_de()
net: netsec: remove superfluous if statement
netfilter: nf_tables: add hardware offload support
net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload
net: flow_offload: add flow_block_cb_is_busy() and use it
net: sched: remove tcf block API
drivers: net: use flow block API
net: sched: use flow block API
net: flow_offload: add flow_block_cb_{priv, incref, decref}()
net: flow_offload: add list handling functions
net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free()
net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_*
net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND
net: flow_offload: add flow_block_cb_setup_simple()
net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC
net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC
...
Pull perf updates from Ingo Molnar:
"The main changes in this cycle on the kernel side were:
- CPU PMU and uncore driver updates to Intel Snow Ridge, IceLake,
KabyLake, AmberLake and WhiskeyLake CPUs.
- Rework the MSR probing infrastructure to make it more robust, make
it work better on virtualized systems and to better expose it on
sysfs.
- Rework PMU attributes group support based on the feedback from
Greg. The core sysfs patch that adds sysfs_update_groups() was
acked by Greg.
There's a lot of perf tooling changes as well, all around the place:
- vendor updates to Intel, cs-etm (ARM), ARM64, s390,
- various enhancements to Intel PT tooling support:
- Improve CBR (Core to Bus Ratio) packets support.
- Export power and ptwrite events to sqlite and postgresql.
- Add support for decoding PEBS via PT packets.
- Add support for samples to contain IPC ratio, collecting cycles
information from CYC packets, showing the IPC info periodically
- Allow using time ranges
- lots of updates to perf pmu, perf stat, perf trace, eBPF support,
perf record, perf diff, etc. - please see the shortlog and Git log
for details"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (252 commits)
tools arch x86: Sync asm/cpufeatures.h with the with the kernel
tools build: Check if gettid() is available before providing helper
perf jvmti: Address gcc string overflow warning for strncpy()
perf python: Remove -fstack-protector-strong if clang doesn't have it
perf annotate TUI browser: Do not use member from variable within its own initialization
perf tests: Fix record+probe_libc_inet_pton.sh for powerpc64
perf evsel: Do not rely on errno values for precise_ip fallback
perf thread: Allow references to thread objects after machine__exit()
perf header: Assign proper ff->ph in perf_event__synthesize_features()
tools arch kvm: Sync kvm headers with the kernel sources
perf script: Allow specifying the files to process guest samples
perf tools metric: Don't include duration_time in group
perf list: Avoid extra : for --raw metrics
perf vendor events intel: Metric fixes for SKX/CLX
perf tools: Fix typos / broken sentences
perf jevents: Add support for Hisi hip08 L3C PMU aliasing
perf jevents: Add support for Hisi hip08 HHA PMU aliasing
perf jevents: Add support for Hisi hip08 DDRC PMU aliasing
perf pmu: Support more complex PMU event aliasing
perf diff: Documentation -c cycles option
...
Pull scheduler updates from Ingo Molnar:
- Remove the unused per rq load array and all its infrastructure, by
Dietmar Eggemann.
- Add utilization clamping support by Patrick Bellasi. This is a
refinement of the energy aware scheduling framework with support for
boosting of interactive and capping of background workloads: to make
sure critical GUI threads get maximum frequency ASAP, and to make
sure background processing doesn't unnecessarily move to cpufreq
governor to higher frequencies and less energy efficient CPU modes.
- Add the bare minimum of tracepoints required for LISA EAS regression
testing, by Qais Yousef - which allows automated testing of various
power management features, including energy aware scheduling.
- Restructure the former tsk_nr_cpus_allowed() facility that the -rt
kernel used to modify the scheduler's CPU affinity logic such as
migrate_disable() - introduce the task->cpus_ptr value instead of
taking the address of &task->cpus_allowed directly - by Sebastian
Andrzej Siewior.
- Misc optimizations, fixes, cleanups and small enhancements - see the
Git log for details.
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
sched/uclamp: Add uclamp support to energy_compute()
sched/uclamp: Add uclamp_util_with()
sched/cpufreq, sched/uclamp: Add clamps for FAIR and RT tasks
sched/uclamp: Set default clamps for RT tasks
sched/uclamp: Reset uclamp values on RESET_ON_FORK
sched/uclamp: Extend sched_setattr() to support utilization clamping
sched/core: Allow sched_setattr() to use the current policy
sched/uclamp: Add system default clamps
sched/uclamp: Enforce last task's UCLAMP_MAX
sched/uclamp: Add bucket local max tracking
sched/uclamp: Add CPU's clamp buckets refcounting
sched/fair: Rename weighted_cpuload() to cpu_runnable_load()
sched/debug: Export the newly added tracepoints
sched/debug: Add sched_overutilized tracepoint
sched/debug: Add new tracepoint to track PELT at se level
sched/debug: Add new tracepoints to track PELT at rq level
sched/debug: Add a new sched_trace_*() helper functions
sched/autogroup: Make autogroup_path() always available
sched/wait: Deduplicate code with do-while
sched/topology: Remove unused 'sd' parameter from arch_scale_cpu_capacity()
...
- Fixes a deadlock from a previous fix to keep module loading
and function tracing text modifications from stepping on each other.
(this has a few patches to help document the issue in comments)
- Fix a crash when the snapshot buffer gets out of sync with the
main ring buffer.
- Fix a memory leak when reading the memory logs
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXRzBCBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qnDaAP9qTFBOFtgIGCT5wVP8xjQeESxh1b8R
tbaT7/U2oPpeiwEAvp1mYo5UYcc8KauBqVaLSLJVN4pv07xiZF5Qgh9C1QE=
=m2IT
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"This includes three fixes:
- Fix a deadlock from a previous fix to keep module loading and
function tracing text modifications from stepping on each other
(this has a few patches to help document the issue in comments)
- Fix a crash when the snapshot buffer gets out of sync with the main
ring buffer
- Fix a memory leak when reading the memory logs"
* tag 'trace-v5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace/x86: Anotate text_mutex split between ftrace_arch_code_modify_post_process() and ftrace_arch_code_modify_prepare()
tracing/snapshot: Resize spare buffer if size changed
tracing: Fix memory leak in tracing_err_log_open()
ftrace/x86: Add a comment to why we take text_mutex in ftrace_arch_code_modify_prepare()
ftrace/x86: Remove possible deadlock between register_kprobe() and ftrace_run_update_code()
The commit 9f255b632b ("module: Fix livepatch/ftrace module text
permissions race") causes a possible deadlock between register_kprobe()
and ftrace_run_update_code() when ftrace is using stop_machine().
The existing dependency chain (in reverse order) is:
-> #1 (text_mutex){+.+.}:
validate_chain.isra.21+0xb32/0xd70
__lock_acquire+0x4b8/0x928
lock_acquire+0x102/0x230
__mutex_lock+0x88/0x908
mutex_lock_nested+0x32/0x40
register_kprobe+0x254/0x658
init_kprobes+0x11a/0x168
do_one_initcall+0x70/0x318
kernel_init_freeable+0x456/0x508
kernel_init+0x22/0x150
ret_from_fork+0x30/0x34
kernel_thread_starter+0x0/0xc
-> #0 (cpu_hotplug_lock.rw_sem){++++}:
check_prev_add+0x90c/0xde0
validate_chain.isra.21+0xb32/0xd70
__lock_acquire+0x4b8/0x928
lock_acquire+0x102/0x230
cpus_read_lock+0x62/0xd0
stop_machine+0x2e/0x60
arch_ftrace_update_code+0x2e/0x40
ftrace_run_update_code+0x40/0xa0
ftrace_startup+0xb2/0x168
register_ftrace_function+0x64/0x88
klp_patch_object+0x1a2/0x290
klp_enable_patch+0x554/0x980
do_one_initcall+0x70/0x318
do_init_module+0x6e/0x250
load_module+0x1782/0x1990
__s390x_sys_finit_module+0xaa/0xf0
system_call+0xd8/0x2d0
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(text_mutex);
lock(cpu_hotplug_lock.rw_sem);
lock(text_mutex);
lock(cpu_hotplug_lock.rw_sem);
It is similar problem that has been solved by the commit 2d1e38f566
("kprobes: Cure hotplug lock ordering issues"). Many locks are involved.
To be on the safe side, text_mutex must become a low level lock taken
after cpu_hotplug_lock.rw_sem.
This can't be achieved easily with the current ftrace design.
For example, arm calls set_all_modules_text_rw() already in
ftrace_arch_code_modify_prepare(), see arch/arm/kernel/ftrace.c.
This functions is called:
+ outside stop_machine() from ftrace_run_update_code()
+ without stop_machine() from ftrace_module_enable()
Fortunately, the problematic fix is needed only on x86_64. It is
the only architecture that calls set_all_modules_text_rw()
in ftrace path and supports livepatching at the same time.
Therefore it is enough to move text_mutex handling from the generic
kernel/trace/ftrace.c into arch/x86/kernel/ftrace.c:
ftrace_arch_code_modify_prepare()
ftrace_arch_code_modify_post_process()
This patch basically reverts the ftrace part of the problematic
commit 9f255b632b ("module: Fix livepatch/ftrace module
text permissions race"). And provides x86_64 specific-fix.
Some refactoring of the ftrace code will be needed when livepatching
is implemented for arm or nds32. These architectures call
set_all_modules_text_rw() and use stop_machine() at the same time.
Link: http://lkml.kernel.org/r/20190627081334.12793-1-pmladek@suse.com
Fixes: 9f255b632b ("module: Fix livepatch/ftrace module text permissions race")
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
[
As reviewed by Miroslav Benes <mbenes@suse.cz>, removed return value of
ftrace_run_update_code() as it is a void function.
]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
With CONFIG_MODULES=n, the following compiler warning occurs:
/data/users/yhs/work/net-next/kernel/trace/bpf_trace.c:605:13: warning:
‘do_bpf_send_signal’ defined but not used [-Wunused-function]
static void do_bpf_send_signal(struct irq_work *entry)
The __init function send_signal_irq_work_init(), which calls
do_bpf_send_signal(), is defined under CONFIG_MODULES. Hence,
when CONFIG_MODULES=n, nobody calls static function do_bpf_send_signal(),
hence the warning.
The init function send_signal_irq_work_init() should work without
CONFIG_MODULES. Moving it out of CONFIG_MODULES
code section fixed the compiler warning, and also make bpf_send_signal()
helper work without CONFIG_MODULES.
Fixes: 8b401f9ed2 ("bpf: implement bpf_send_signal() helper")
Reported-By: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Pull networking fixes from David Miller:
"Lots of bug fixes here:
1) Out of bounds access in __bpf_skc_lookup, from Lorenz Bauer.
2) Fix rate reporting in cfg80211_calculate_bitrate_he(), from John
Crispin.
3) Use after free in psock backlog workqueue, from John Fastabend.
4) Fix source port matching in fdb peer flow rule of mlx5, from Raed
Salem.
5) Use atomic_inc_not_zero() in fl6_sock_lookup(), from Eric Dumazet.
6) Network header needs to be set for packet redirect in nfp, from
John Hurley.
7) Fix udp zerocopy refcnt, from Willem de Bruijn.
8) Don't assume linear buffers in vxlan and geneve error handlers,
from Stefano Brivio.
9) Fix TOS matching in mlxsw, from Jiri Pirko.
10) More SCTP cookie memory leak fixes, from Neil Horman.
11) Fix VLAN filtering in rtl8366, from Linus Walluij.
12) Various TCP SACK payload size and fragmentation memory limit fixes
from Eric Dumazet.
13) Use after free in pneigh_get_next(), also from Eric Dumazet.
14) LAPB control block leak fix from Jeremy Sowden"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (145 commits)
lapb: fixed leak of control-blocks.
tipc: purge deferredq list for each grp member in tipc_group_delete
ax25: fix inconsistent lock state in ax25_destroy_timer
neigh: fix use-after-free read in pneigh_get_next
tcp: fix compile error if !CONFIG_SYSCTL
hv_sock: Suppress bogus "may be used uninitialized" warnings
be2net: Fix number of Rx queues used for flow hashing
net: handle 802.1P vlan 0 packets properly
tcp: enforce tcp_min_snd_mss in tcp_mtu_probing()
tcp: add tcp_min_snd_mss sysctl
tcp: tcp_fragment() should apply sane memory limits
tcp: limit payload size of sacked skbs
Revert "net: phylink: set the autoneg state in phylink_phy_change"
bpf: fix nested bpf tracepoints with per-cpu data
bpf: Fix out of bounds memory access in bpf_sk_storage
vsock/virtio: set SOCK_DONE on peer shutdown
net: dsa: rtl8366: Fix up VLAN filtering
net: phylink: set the autoneg state in phylink_phy_change
net: add high_order_alloc_disable sysctl/static key
tcp: add tcp_tx_skb_cache sysctl
...
BPF_PROG_TYPE_RAW_TRACEPOINTs can be executed nested on the same CPU, as
they do not increment bpf_prog_active while executing.
This enables three levels of nesting, to support
- a kprobe or raw tp or perf event,
- another one of the above that irq context happens to call, and
- another one in nmi context
(at most one of which may be a kprobe or perf event).
Fixes: 20b9d7ac48 ("bpf: avoid excessive stack usage for perf_sample_data")
Signed-off-by: Matt Mullins <mmullins@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- Out of range read of stack trace output
- Fix for NULL pointer dereference in trace_uprobe_create()
- Fix to a livepatching / ftrace permission race in the module code
- Fix for NULL pointer dereference in free_ftrace_func_mapper()
- A couple of build warning clean ups
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXQToxhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qusmAP4/mmJPgsDchnu5ui0wB8BByzJlsPn8
luXFDuqI4f34zgD+JCmeYbj5LLh98D9XkaaEgP4yz3yKsWeSdwWPCU0vTgo=
=M/+E
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Out of range read of stack trace output
- Fix for NULL pointer dereference in trace_uprobe_create()
- Fix to a livepatching / ftrace permission race in the module code
- Fix for NULL pointer dereference in free_ftrace_func_mapper()
- A couple of build warning clean ups
* tag 'trace-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Fix NULL pointer dereference in free_ftrace_func_mapper()
module: Fix livepatch/ftrace module text permissions race
tracing/uprobe: Fix obsolete comment on trace_uprobe_create()
tracing/uprobe: Fix NULL pointer dereference in trace_uprobe_create()
tracing: Make two symbols static
tracing: avoid build warning with HAVE_NOP_MCOUNT
tracing: Fix out-of-range read in trace_stack_print()
Commit 0597c49c69 ("tracing/uprobes: Use dyn_event framework for
uprobe events") cleaned up the usage of trace_uprobe_create(), and the
function has been no longer used for removing uprobe/uretprobe.
Link: http://lkml.kernel.org/r/20190614074026.8045-2-devel@etsukata.com
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Eiichi Tsukata <devel@etsukata.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix sparse warnings:
kernel/trace/trace.c:6927:24: warning:
symbol 'get_tracing_log_err' was not declared. Should it be static?
kernel/trace/trace.c:8196:15: warning:
symbol 'trace_instance_dir' was not declared. Should it be static?
Link: http://lkml.kernel.org/r/20190614153210.24424-1-yuehaibing@huawei.com
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Selecting HAVE_NOP_MCOUNT enables -mnop-mcount (if gcc supports it)
and sets CC_USING_NOP_MCOUNT. Reuse __is_defined (which is suitable for
testing CC_USING_* defines) to avoid conditional compilation and fix
the following gcc 9 warning on s390:
kernel/trace/ftrace.c:2514:1: warning: ‘ftrace_code_disable’ defined
but not used [-Wunused-function]
Link: http://lkml.kernel.org/r/patch.git-1a82d13f33ac.your-ad-here.call-01559732716-ext-6629@work.hours
Fixes: 2f4df0017b ("tracing: Add -mcount-nop option support")
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-block@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, non-privileged user could only use uprobe with
kernel.perf_event_paranoid = -1
However, setting perf_event_paranoid to -1 leaks other users' processes to
non-privileged uprobes.
To introduce proper permission control of uprobes, we are building the
following system:
A daemon with CAP_SYS_ADMIN is in charge to create uprobes via tracefs;
Users asks the daemon to create uprobes;
Then user can attach uprobe only to processes owned by the user.
This patch allows non-privileged user to attach uprobe to processes owned
by the user.
The following example shows how to use uprobe with non-privileged user.
This is based on Brendan's blog post [1]
1. Create uprobe with root:
sudo perf probe -x 'readline%return +0($retval):string'
2. Then non-root user can use the uprobe as:
perf record -vvv -e probe_bash:readline__return -p <pid> sleep 20
perf script
[1] http://www.brendangregg.com/blog/2015-06-28/linux-ftrace-uprobe.html
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <kernel-team@fb.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190507161545.788381-1-songliubraving@fb.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In commit:
4b53a3412d ("sched/core: Remove the tsk_nr_cpus_allowed() wrapper")
the tsk_nr_cpus_allowed() wrapper was removed. There was not
much difference in !RT but in RT we used this to implement
migrate_disable(). Within a migrate_disable() section the CPU mask is
restricted to single CPU while the "normal" CPU mask remains untouched.
As an alternative implementation Ingo suggested to use:
struct task_struct {
const cpumask_t *cpus_ptr;
cpumask_t cpus_mask;
};
with
t->cpus_ptr = &t->cpus_mask;
In -RT we then can switch the cpus_ptr to:
t->cpus_ptr = &cpumask_of(task_cpu(p));
in a migration disabled region. The rules are simple:
- Code that 'uses' ->cpus_allowed would use the pointer.
- Code that 'modifies' ->cpus_allowed would use the direct mask.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190423142636.14347-1-bigeasy@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2019-05-31
The following pull-request contains BPF updates for your *net-next* tree.
Lots of exciting new features in the first PR of this developement cycle!
The main changes are:
1) misc verifier improvements, from Alexei.
2) bpftool can now convert btf to valid C, from Andrii.
3) verifier can insert explicit ZEXT insn when requested by 32-bit JITs.
This feature greatly improves BPF speed on 32-bit architectures. From Jiong.
4) cgroups will now auto-detach bpf programs. This fixes issue of thousands
bpf programs got stuck in dying cgroups. From Roman.
5) new bpf_send_signal() helper, from Yonghong.
6) cgroup inet skb programs can signal CN to the stack, from Lawrence.
7) miscellaneous cleanups, from many developers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXO303xQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qlb7AP4179SWPy9RFxvxyjTmpPFPL9oR0Q26
sOTyIBN99MUTsgEA0FNWz7/FWtFDa1wbh0tEVreaTQlKEeoIYF96dkN0iwE=
=BJgg
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"This fixes a memory leak from the error path in the event filter
logic"
* tag 'trace-v5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Avoid memory leak in predicate_parse()
Now that we don't have __rcu markers on the bpf_prog_array helpers,
let's use proper rcu_dereference_protected to obtain array pointer
under mutex.
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
In case of errors, predicate_parse() goes to the out_free label
to free memory and to return an error code.
However, predicate_parse() does not free the predicates of the
temporary prog_stack array, thence leaking them.
Link: http://lkml.kernel.org/r/20190528154338.29976-1-tomasbortoli@gmail.com
Cc: stable@vger.kernel.org
Fixes: 80765597bc ("tracing: Rewrite filter logic to be simpler and faster")
Reported-by: syzbot+6b8e0fb820e570c59e19@syzkaller.appspotmail.com
Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com>
[ Added protection around freeing prog_stack[i].pred ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Commit c19fa94a8f ("Add HAVE_64BIT_ALIGNED_ACCESS") added the config for
architectures that required 64bit aligned access for all 64bit words. As
the ftrace ring buffer stores data on 4 byte alignment, this config option
was used to force it to store data on 8 byte alignment to make sure the data
being stored and written directly into the ring buffer was 8 byte aligned as
it would cause issues trying to write an 8 byte word on a 4 not 8 byte
aligned memory location.
But with the removal of the metag architecture, which was the only
architecture to use this, there is no architecture supported by Linux that
requires 8 byte aligne access for all 8 byte words (4 byte alignment is good
enough). Removing this config can simplify the code a bit.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Commit 8b401f9ed2 ("bpf: implement bpf_send_signal() helper")
introduced bpf_send_signal() helper. If the context is nmi,
the sending signal work needs to be deferred to irq_work.
If the signal is invalid, the error will appear in irq_work
and it won't be propagated to user.
This patch did an early check in the helper itself to notify
user invalid signal, as suggested by Daniel.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
GCC 9 now warns about calling memset() on partial structures when it
goes across multiple fields. This adds a helper for the place in
tracing that does this type of clearing of a structure.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXOrlfhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qoDhAP4mogBm0JjJ1LWr8RX2/X7qFm0x1zLz
5Mk0QKfeRP3MYgEAl2mV/HeFp7aMxEY2CKy0LslmaXPhamPx1r0LlfMgIws=
=drP3
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing warning fix from Steven Rostedt:
"Make the GCC 9 warning for sub struct memset go away.
GCC 9 now warns about calling memset() on partial structures when it
goes across multiple fields. This adds a helper for the place in
tracing that does this type of clearing of a structure"
* tag 'trace-v5.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Silence GCC 9 array bounds warning
Custom trampolines can only be enabled if there is only a single ops
attached to it. If there's only a single callback registered to a function,
and the ops has a trampoline registered for it, then we can call the
trampoline directly. This is very useful for improving the performance of
ftrace and livepatch.
If more than one callback is registered to a function, the general
trampoline is used, and the custom trampoline is not restored back to the
direct call even if all the other callbacks were unregistered and we are
back to one callback for the function.
To fix this, set FTRACE_FL_TRAMP flag if rec count is decremented
to one, and the ops that left has a trampoline.
Testing After this patch :
insmod livepatch_unshare_files.ko
cat /sys/kernel/debug/tracing/enabled_functions
unshare_files (1) R I tramp: 0xffffffffc0000000(klp_ftrace_handler+0x0/0xa0) ->ftrace_ops_assist_func+0x0/0xf0
echo unshare_files > /sys/kernel/debug/tracing/set_ftrace_filter
echo function > /sys/kernel/debug/tracing/current_tracer
cat /sys/kernel/debug/tracing/enabled_functions
unshare_files (2) R I ->ftrace_ops_list_func+0x0/0x150
echo nop > /sys/kernel/debug/tracing/current_tracer
cat /sys/kernel/debug/tracing/enabled_functions
unshare_files (1) R I tramp: 0xffffffffc0000000(klp_ftrace_handler+0x0/0xa0) ->ftrace_ops_assist_func+0x0/0xf0
Link: http://lkml.kernel.org/r/1556969979-111047-1-git-send-email-cj.chengjian@huawei.com
Signed-off-by: Cheng Jian <cj.chengjian@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The trace event self tests enable loop through *all* events, enables each
one, one at a time, runs some code to trigger various events (not
necessarily the same events), and checks if anything went wrong. The issue
is that trace events are usually the least likely start up test to cause a
problem, but they take the longest to run (because there are so many
events). When one of the other tests trigger a bug, the trace event start up
tests causes the bisect to take much longer, because it takes 10s of seconds
to get through the trace event tests.
By making them a separate config (even though they are enabled by default if
start up tests are set), it is possible to turn them off and still run the
other tracing start up tests much quicker.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add kprobe_event= boot parameter to define kprobe events
at boot time.
The definition syntax is similar to tracefs/kprobe_events
interface, but use ',' and ';' instead of ' ' and '\n'
respectively. e.g.
kprobe_event=p,vfs_read,$arg1,$arg2
This puts a probe on vfs_read with argument1 and 2, and
enable the new event.
Link: http://lkml.kernel.org/r/155851395498.15728.830529496248543583.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The comment of trace_filter_add_remove_task() refers to the function as
'trace_pid_filter_add_remove_task', use the correct name.
Link: http://lkml.kernel.org/r/20190523192628.134406-1-mka@chromium.org
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Support user-space dereference syntax for probe event arguments
to dereference the data-structure or array in user-space.
The syntax is just adding 'u' before an offset value.
+|-u<OFFSET>(<FETCHARG>)
e.g. +u8(%ax), +u0(+0(%si))
For example, if you probe do_sched_setscheduler(pid, policy,
param) and record param->sched_priority, you can add new
probe as below;
p do_sched_setscheduler priority=+u0($arg3)
Note that kprobe event provides this and it doesn't change the
dereference method automatically because we do not know whether
the given address is in userspace or kernel on some archs.
So as same as "ustring", this is an option for user, who has to
carefully choose the dereference method.
Link: http://lkml.kernel.org/r/155789872187.26965.4468456816590888687.stgit@devnote2
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add "ustring" type for fetching user-space string from kprobe event.
User can specify ustring type at uprobe event, and it is same as
"string" for uprobe.
Note that probe-event provides this option but it doesn't choose the
correct type automatically since we have not way to decide the address
is in user-space or not on some arch (and on some other arch, you can
fetch the string by "string" type). So user must carefully check the
target code (e.g. if you see __user on the target variable) and
use this new type.
Link: http://lkml.kernel.org/r/155789871009.26965.14167558859557329331.stgit@devnote2
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The code modification functions have "enable" and "update" variables that
are sometimes "int" but used as "bool". Remove the ambiguity and make them
"bool" when they are only used for true or false values.
Link: http://lkml.kernel.org/r/e1429923d9eda92a3cf5ee9e33c7eacce539781d.1558115654.git.naveen.n.rao@linux.vnet.ibm.com
Reported-by: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Starting with GCC 9, -Warray-bounds detects cases when memset is called
starting on a member of a struct but the size to be cleared ends up
writing over further members.
Such a call happens in the trace code to clear, at once, all members
after and including `seq` on struct trace_iterator:
In function 'memset',
inlined from 'ftrace_dump' at kernel/trace/trace.c:8914:3:
./include/linux/string.h:344:9: warning: '__builtin_memset' offset
[8505, 8560] from the object at 'iter' is out of the bounds of
referenced subobject 'seq' with type 'struct trace_seq' at offset
4368 [-Warray-bounds]
344 | return __builtin_memset(p, c, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
In order to avoid GCC complaining about it, we compute the address
ourselves by adding the offsetof distance instead of referring
directly to the member.
Since there are two places doing this clear (trace.c and trace_kdb.c),
take the chance to move the workaround into a single place in
the internal header.
Link: http://lkml.kernel.org/r/20190523124535.GA12931@gmail.com
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
[ Removed unnecessary parenthesis around "iter" ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
code and I forgot to incorporate them.
I also added a small clean up patch that was sent to me a while ago
and I just noticed it.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXOixqRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qlPsAQCmNzno+SJMXLLIojZ80pqs9PqLqIrW
iBopFNihRBAkxgEAle8Pvr53S4R/Hjn6j++kxBm/uWaEfICOzyqcSyqxlQA=
=Sin+
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Tom Zanussi sent me some small fixes and cleanups to the histogram
code and I forgot to incorporate them.
I also added a small clean up patch that was sent to me a while ago
and I just noticed it"
* tag 'trace-v5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
kernel/trace/trace.h: Remove duplicate header of trace_seq.h
tracing: Add a check_val() check before updating cond_snapshot() track_val
tracing: Check keys for variable references in expressions too
tracing: Prevent hist_field_var_ref() from accessing NULL tracing_map_elts
This patch tries to solve the following specific use case.
Currently, bpf program can already collect stack traces
through kernel function get_perf_callchain()
when certain events happens (e.g., cache miss counter or
cpu clock counter overflows). But such stack traces are
not enough for jitted programs, e.g., hhvm (jited php).
To get real stack trace, jit engine internal data structures
need to be traversed in order to get the real user functions.
bpf program itself may not be the best place to traverse
the jit engine as the traversing logic could be complex and
it is not a stable interface either.
Instead, hhvm implements a signal handler,
e.g. for SIGALARM, and a set of program locations which
it can dump stack traces. When it receives a signal, it will
dump the stack in next such program location.
Such a mechanism can be implemented in the following way:
. a perf ring buffer is created between bpf program
and tracing app.
. once a particular event happens, bpf program writes
to the ring buffer and the tracing app gets notified.
. the tracing app sends a signal SIGALARM to the hhvm.
But this method could have large delays and causing profiling
results skewed.
This patch implements bpf_send_signal() helper to send
a signal to hhvm in real time, resulting in intended stack traces.
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Here are series of patches that add SPDX tags to different kernel files,
based on two different things:
- SPDX entries are added to a bunch of files that we missed a year ago
that do not have any license information at all.
These were either missed because the tool saw the MODULE_LICENSE()
tag, or some EXPORT_SYMBOL tags, and got confused and thought the
file had a real license, or the files have been added since the last
big sweep, or they were Makefile/Kconfig files, which we didn't
touch last time.
- Add GPL-2.0-only or GPL-2.0-or-later tags to files where our scan
tools can determine the license text in the file itself. Where this
happens, the license text is removed, in order to cut down on the
700+ different ways we have in the kernel today, in a quest to get
rid of all of these.
These patches have been out for review on the linux-spdx@vger mailing
list, and while they were created by automatic tools, they were
hand-verified by a bunch of different people, all whom names are on the
patches are reviewers.
The reason for these "large" patches is if we were to continue to
progress at the current rate of change in the kernel, adding license
tags to individual files in different subsystems, we would be finished
in about 10 years at the earliest.
There will be more series of these types of patches coming over the next
few weeks as the tools and reviewers crunch through the more "odd"
variants of how to say "GPLv2" that developers have come up with over
the years, combined with other fun oddities (GPL + a BSD disclaimer?)
that are being unearthed, with the goal for the whole kernel to be
cleaned up.
These diffstats are not small, 3840 files are touched, over 10k lines
removed in just 24 patches.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXOP8uw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynmGQCgy3evqzleuOITDpuWaxewFdHqiJYAnA7KRw4H
1KwtfRnMtG6dk/XaS7H7
=O9lH
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull SPDX update from Greg KH:
"Here is a series of patches that add SPDX tags to different kernel
files, based on two different things:
- SPDX entries are added to a bunch of files that we missed a year
ago that do not have any license information at all.
These were either missed because the tool saw the MODULE_LICENSE()
tag, or some EXPORT_SYMBOL tags, and got confused and thought the
file had a real license, or the files have been added since the
last big sweep, or they were Makefile/Kconfig files, which we
didn't touch last time.
- Add GPL-2.0-only or GPL-2.0-or-later tags to files where our scan
tools can determine the license text in the file itself. Where this
happens, the license text is removed, in order to cut down on the
700+ different ways we have in the kernel today, in a quest to get
rid of all of these.
These patches have been out for review on the linux-spdx@vger mailing
list, and while they were created by automatic tools, they were
hand-verified by a bunch of different people, all whom names are on
the patches are reviewers.
The reason for these "large" patches is if we were to continue to
progress at the current rate of change in the kernel, adding license
tags to individual files in different subsystems, we would be finished
in about 10 years at the earliest.
There will be more series of these types of patches coming over the
next few weeks as the tools and reviewers crunch through the more
"odd" variants of how to say "GPLv2" that developers have come up with
over the years, combined with other fun oddities (GPL + a BSD
disclaimer?) that are being unearthed, with the goal for the whole
kernel to be cleaned up.
These diffstats are not small, 3840 files are touched, over 10k lines
removed in just 24 patches"
* tag 'spdx-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (24 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 25
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 24
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 23
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 22
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 21
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 20
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 19
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 18
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 17
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 15
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 14
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 12
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 11
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 10
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 9
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 7
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 5
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 4
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 3
...
Without this check a snapshot is taken whenever a bucket's max is hit,
rather than only when the global max is hit, as it should be.
Before:
In this example, we do a first run of the workload (cyclictest),
examine the output, note the max ('triggering value') (347), then do
a second run and note the max again.
In this case, the max in the second run (39) is below the max in the
first run, but since we haven't cleared the histogram, the first max
is still in the histogram and is higher than any other max, so it
should still be the max for the snapshot. It isn't however - the
value should still be 347 after the second run.
# echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_waking/trigger
# echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:onmax($wakeup_lat).save(next_prio,next_comm,prev_pid,prev_prio,prev_comm):onmax($wakeup_lat).snapshot() if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
# cyclictest -p 80 -n -s -t 2 -D 2
# cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist
{ next_pid: 2143 } hitcount: 199
max: 44 next_prio: 120 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/4
{ next_pid: 2145 } hitcount: 1325
max: 38 next_prio: 19 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/2
{ next_pid: 2144 } hitcount: 1982
max: 347 next_prio: 19 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/6
Snapshot taken (see tracing/snapshot). Details:
triggering value { onmax($wakeup_lat) }: 347
triggered by event with key: { next_pid: 2144 }
# cyclictest -p 80 -n -s -t 2 -D 2
# cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist
{ next_pid: 2143 } hitcount: 199
max: 44 next_prio: 120 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/4
{ next_pid: 2148 } hitcount: 199
max: 16 next_prio: 120 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/1
{ next_pid: 2145 } hitcount: 1325
max: 38 next_prio: 19 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/2
{ next_pid: 2150 } hitcount: 1326
max: 39 next_prio: 19 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/4
{ next_pid: 2144 } hitcount: 1982
max: 347 next_prio: 19 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/6
{ next_pid: 2149 } hitcount: 1983
max: 130 next_prio: 19 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/0
Snapshot taken (see tracing/snapshot). Details:
triggering value { onmax($wakeup_lat) }: 39
triggered by event with key: { next_pid: 2150 }
After:
In this example, we do a first run of the workload (cyclictest),
examine the output, note the max ('triggering value') (375), then do
a second run and note the max again.
In this case, the max in the second run is still 375, the highest in
any bucket, as it should be.
# cyclictest -p 80 -n -s -t 2 -D 2
# cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist
{ next_pid: 2072 } hitcount: 200
max: 28 next_prio: 120 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/5
{ next_pid: 2074 } hitcount: 1323
max: 375 next_prio: 19 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/2
{ next_pid: 2073 } hitcount: 1980
max: 153 next_prio: 19 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/6
Snapshot taken (see tracing/snapshot). Details:
triggering value { onmax($wakeup_lat) }: 375
triggered by event with key: { next_pid: 2074 }
# cyclictest -p 80 -n -s -t 2 -D 2
# cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist
{ next_pid: 2101 } hitcount: 199
max: 49 next_prio: 120 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/6
{ next_pid: 2072 } hitcount: 200
max: 28 next_prio: 120 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/5
{ next_pid: 2074 } hitcount: 1323
max: 375 next_prio: 19 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/2
{ next_pid: 2103 } hitcount: 1325
max: 74 next_prio: 19 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/4
{ next_pid: 2073 } hitcount: 1980
max: 153 next_prio: 19 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/6
{ next_pid: 2102 } hitcount: 1981
max: 84 next_prio: 19 next_comm: cyclictest
prev_pid: 12 prev_prio: 120 prev_comm: kworker/0:1
Snapshot taken (see tracing/snapshot). Details:
triggering value { onmax($wakeup_lat) }: 375
triggered by event with key: { next_pid: 2074 }
Link: http://lkml.kernel.org/r/95958351329f129c07504b4d1769c47a97b70d65.1555597045.git.tom.zanussi@linux.intel.com
Cc: stable@vger.kernel.org
Fixes: a3785b7eca ("tracing: Add hist trigger snapshot() action")
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
There's an existing check for variable references in keys, but it
doesn't go far enough. It checks whether a key field is a variable
reference but doesn't check whether it's an expression containing
variable references, which can cause the same problems for callers.
Use the existing field_has_hist_vars() function rather than a direct
top-level flag check to catch all possible variable references.
Link: http://lkml.kernel.org/r/e8c3d3d53db5ca90ceea5a46e5413103a6902fc7.1555597045.git.tom.zanussi@linux.intel.com
Cc: stable@vger.kernel.org
Fixes: 067fe038e7 ("tracing: Add variable reference handling to hist triggers")
Reported-by: Vincent Bernat <vincent@bernat.ch>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
hist_field_var_ref() is an implementation of hist_field_fn_t(), which
can be called with a null tracing_map_elt elt param when assembling a
key in event_hist_trigger().
In the case of hist_field_var_ref() this doesn't make sense, because a
variable can only be resolved by looking it up using an already
assembled key i.e. a variable can't be used to assemble a key since
the key is required in order to access the variable.
Upper layers should prevent the user from constructing a key using a
variable in the first place, but in case one slips through, it
shouldn't cause a NULL pointer dereference. Also if one does slip
through, we want to know about it, so emit a one-time warning in that
case.
Link: http://lkml.kernel.org/r/64ec8dc15c14d305295b64cdfcc6b2b9dd14753f.1555597045.git.tom.zanussi@linux.intel.com
Reported-by: Vincent Bernat <vincent@bernat.ch>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull networking fixes from David Miller:1) Use after free in __dev_map_entry_free(), from Eric Dumazet.
1) Use after free in __dev_map_entry_free(), from Eric Dumazet.
2) Fix TCP retransmission timestamps on passive Fast Open, from Yuchung
Cheng.
3) Orphan NFC, we'll take the patches directly into my tree. From
Johannes Berg.
4) We can't recycle cloned TCP skbs, from Eric Dumazet.
5) Some flow dissector bpf test fixes, from Stanislav Fomichev.
6) Fix RCU marking and warnings in rhashtable, from Herbert Xu.
7) Fix some potential fib6 leaks, from Eric Dumazet.
8) Fix a _decode_session4 uninitialized memory read bug fix that got
lost in a merge. From Florian Westphal.
9) Fix ipv6 source address routing wrt. exception route entries, from
Wei Wang.
10) The netdev_xmit_more() conversion was not done %100 properly in mlx5
driver, fix from Tariq Toukan.
11) Clean up botched merge on netfilter kselftest, from Florian
Westphal.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (74 commits)
of_net: fix of_get_mac_address retval if compiled without CONFIG_OF
net: fix kernel-doc warnings for socket.c
net: Treat sock->sk_drops as an unsigned int when printing
kselftests: netfilter: fix leftover net/net-next merge conflict
mlxsw: core: Prevent reading unsupported slave address from SFP EEPROM
mlxsw: core: Prevent QSFP module initialization for old hardware
vsock/virtio: Initialize core virtio vsock before registering the driver
net/mlx5e: Fix possible modify header actions memory leak
net/mlx5e: Fix no rewrite fields with the same match
net/mlx5e: Additional check for flow destination comparison
net/mlx5e: Add missing ethtool driver info for representors
net/mlx5e: Fix number of vports for ingress ACL configuration
net/mlx5e: Fix ethtool rxfh commands when CONFIG_MLX5_EN_RXNFC is disabled
net/mlx5e: Fix wrong xmit_more application
net/mlx5: Fix peer pf disable hca command
net/mlx5: E-Switch, Correct type to u16 for vport_num and int for vport_index
net/mlx5: Add meaningful return codes to status_to_err function
net/mlx5: Imply MLXFW in mlx5_core
Revert "tipc: fix modprobe tipc failed after switch order of device registration"
vsock/virtio: free packets during the socket release
...
Daniel Borkmann says:
====================
pull-request: bpf 2019-05-16
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix a use after free in __dev_map_entry_free(), from Eric.
2) Several sockmap related bug fixes: a splat in strparser if
it was never initialized, remove duplicate ingress msg list
purging which can race, fix msg->sg.size accounting upon
skb to msg conversion, and last but not least fix a timeout
bug in tcp_bpf_wait_data(), from John.
3) Fix LRU map to avoid messing with eviction heuristics upon
syscall lookup, e.g. map walks from user space side will
then lead to eviction of just recently created entries on
updates as it would mark all map entries, from Daniel.
4) Don't bail out when libbpf feature probing fails. Also
various smaller fixes to flow_dissector test, from Stanislav.
5) Fix missing brackets for BTF_INT_OFFSET() in UAPI, from Gary.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
- Removing of non-DYNAMIC_FTRACE from 32bit x86
- Removing of mcount support from x86
- Emulating a call from int3 on x86_64, fixes live kernel patching
- Consolidated Tracing Error logs file
Minor updates:
- Removal of klp_check_compiler_support()
- kdb ftrace dumping output changes
- Accessing and creating ftrace instances from inside the kernel
- Clean up of #define if macro
- Introduction of TRACE_EVENT_NOP() to disable trace events based on config
options
And other minor fixes and clean ups
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXNxMZxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qq4PAP44kP6VbwL8CHyI2A3xuJ6Hwxd+2Z2r
ip66RtzyJ+2iCgEA2QCuWUlEt2bLpF9a8IQ4N9tWenSeW2i7gunPb+tioQw=
=RVQo
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"The major changes in this tracing update includes:
- Removal of non-DYNAMIC_FTRACE from 32bit x86
- Removal of mcount support from x86
- Emulating a call from int3 on x86_64, fixes live kernel patching
- Consolidated Tracing Error logs file
Minor updates:
- Removal of klp_check_compiler_support()
- kdb ftrace dumping output changes
- Accessing and creating ftrace instances from inside the kernel
- Clean up of #define if macro
- Introduction of TRACE_EVENT_NOP() to disable trace events based on
config options
And other minor fixes and clean ups"
* tag 'trace-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits)
x86: Hide the int3_emulate_call/jmp functions from UML
livepatch: Remove klp_check_compiler_support()
ftrace/x86: Remove mcount support
ftrace/x86_32: Remove support for non DYNAMIC_FTRACE
tracing: Simplify "if" macro code
tracing: Fix documentation about disabling options using trace_options
tracing: Replace kzalloc with kcalloc
tracing: Fix partial reading of trace event's id file
tracing: Allow RCU to run between postponed startup tests
tracing: Fix white space issues in parse_pred() function
tracing: Eliminate const char[] auto variables
ring-buffer: Fix mispelling of Calculate
tracing: probeevent: Fix to make the type of $comm string
tracing: probeevent: Do not accumulate on ret variable
tracing: uprobes: Re-enable $comm support for uprobe events
ftrace/x86_64: Emulate call function while updating in breakpoint handler
x86_64: Allow breakpoints to emulate call instructions
x86_64: Add gap to int3 to allow for call emulation
tracing: kdb: Allow ftdump to skip all but the last few entries
tracing: Add trace_total_entries() / trace_total_entries_cpu()
...
Both of them are not declared in the headers and not used outside
of bpf_trace.c file.
Fixes: a38d1107f9 ("bpf: support raw tracepoints in modules")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Core changes:
- The gpiolib MMIO driver has been enhanced to handle two direction
registers, i.e. one register to set lines as input and one register
to set lines as output. It turns out some silicon engineer thinks
the ability to configure a line as input and output at the same
time makes sense, this can be debated but includes a lot of analog
electronics reasoning, and the registers are there and need to
be handled consistently. Unsurprisingly, we enforce the lines to
be either inputs or outputs in such schemes.
- Send in the proper argument value to .set_config() dispatched to
the pin control subsystem. Nobody used it before, now someone
does, so fix it to work as expected.
- The ACPI gpiolib portions can now handle pin bias setting (pull up
or pull down). This has been in the ACPI spec for years and we
finally have it properly integrated with Linux GPIOs. It was based
on an observation from Andy Schevchenko that Thomas Petazzoni's
changes to the core for biasing the PCA950x GPIO expander actually
happen to fit hand-in-glove with what the ACPI core needed.
Such nice synergies happen sometimes.
New drivers:
- A new driver for the Mellanox BlueField GPIO controller. This is
using 64bit MMIO registers and can configure lines as inputs
and outputs at the same time and after improving the MMIO library
we handle it just fine. Interesting.
- A new IXP4xx proper gpiochip driver with hierarchical interrupts
should be coming in from the ARM SoC tree as well.
Driver enhancements:
- The PCA053x driver handles the CAT9554 GPIO expander.
- The PCA053x driver handles the NXP PCAL6416 GPIO expander.
- Wake-up support on PCA053x GPIO lines.
- OMAP now does a nice asynchronous IRQ handling on wake-ups by
letting everything wake up on edges, and this makes runtime PM
work as expected too.
Misc:
- Several cleanups such as devres fixes.
- Get rid of some languager comstructs that cause problems when
compiling with LLVMs clang.
- Documentation review and update.
-----BEGIN PGP SIGNATURE-----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=rhto
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull gpio updates from Linus Walleij:
"This is the bulk of the GPIO changes for the v5.2 kernel cycle. A bit
later than usual because I was ironing out my own mistakes. I'm
holding some stuff back for the next kernel as a result, and this
should be a healthy and well tested batch.
Core changes:
- The gpiolib MMIO driver has been enhanced to handle two direction
registers, i.e. one register to set lines as input and one register
to set lines as output. It turns out some silicon engineer thinks
the ability to configure a line as input and output at the same
time makes sense, this can be debated but includes a lot of analog
electronics reasoning, and the registers are there and need to be
handled consistently. Unsurprisingly, we enforce the lines to be
either inputs or outputs in such schemes.
- Send in the proper argument value to .set_config() dispatched to
the pin control subsystem. Nobody used it before, now someone does,
so fix it to work as expected.
- The ACPI gpiolib portions can now handle pin bias setting (pull up
or pull down). This has been in the ACPI spec for years and we
finally have it properly integrated with Linux GPIOs. It was based
on an observation from Andy Schevchenko that Thomas Petazzoni's
changes to the core for biasing the PCA950x GPIO expander actually
happen to fit hand-in-glove with what the ACPI core needed. Such
nice synergies happen sometimes.
New drivers:
- A new driver for the Mellanox BlueField GPIO controller. This is
using 64bit MMIO registers and can configure lines as inputs and
outputs at the same time and after improving the MMIO library we
handle it just fine. Interesting.
- A new IXP4xx proper gpiochip driver with hierarchical interrupts
should be coming in from the ARM SoC tree as well.
Driver enhancements:
- The PCA053x driver handles the CAT9554 GPIO expander.
- The PCA053x driver handles the NXP PCAL6416 GPIO expander.
- Wake-up support on PCA053x GPIO lines.
- OMAP now does a nice asynchronous IRQ handling on wake-ups by
letting everything wake up on edges, and this makes runtime PM work
as expected too.
Misc:
- Several cleanups such as devres fixes.
- Get rid of some languager comstructs that cause problems when
compiling with LLVMs clang.
- Documentation review and update"
* tag 'gpio-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (85 commits)
gpio: Update documentation
docs: gpio: convert docs to ReST and rename to *.rst
gpio: sch: Remove write-only core_base
gpio: pxa: Make two symbols static
gpiolib: acpi: Respect pin bias setting
gpiolib: acpi: Add acpi_gpio_update_gpiod_lookup_flags() helper
gpiolib: acpi: Set pin value, based on bias, more accurately
gpiolib: acpi: Change type of dflags
gpiolib: Introduce GPIO_LOOKUP_FLAGS_DEFAULT
gpiolib: Make use of enum gpio_lookup_flags consistent
gpiolib: Indent entry values of enum gpio_lookup_flags
gpio: pca953x: add support for pca6416
dt-bindings: gpio: pca953x: document the nxp,pca6416
gpio: pca953x: add pcal6416 to the of_device_id table
gpio: gpio-omap: Remove conditional pm_runtime handling for GPIO interrupts
gpio: gpio-omap: configure edge detection for level IRQs for idle wakeup
tracing: stop making gpio tracing configurable
gpio: pca953x: Configure wake-up path when wake-up is enabled
gpio: of: Optimize quirk checks
gpio: mmio: Drop bgpio_dir_inverted
...
To disable a tracing option using the trace_options file, the option
name needs to be prefixed with 'no', and not suffixed, as the README
states. Fix it.
Link: http://lkml.kernel.org/r/154872690031.47356.5739053380942044586.stgit@srivatsa-ubuntu
Signed-off-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Replace kzalloc() function with its 2-factor argument form, kcalloc().
This patch replaces cases of:
kzalloc(a * b, gfp)
with:
kcalloc(a, b, gfp)
This code was detected with the help of Coccinelle.
Link: http://lkml.kernel.org/r/20190115043408.GA23456@embeddedor
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When reading only part of the id file, the ppos isn't tracked correctly.
This is taken care by simple_read_from_buffer.
Reading a single byte, and then the next byte would result EOF.
While this seems like not a big deal, this breaks abstractions that
reads information from files unbuffered. See for example
https://github.com/golang/go/issues/29399
This code was mentioned as problematic in
commit cd458ba9d5
("tracing: Do not (ab)use trace_seq in event_id_read()")
An example C code that show this bug is:
#include <stdio.h>
#include <stdint.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
int main(int argc, char **argv) {
if (argc < 2)
return 1;
int fd = open(argv[1], O_RDONLY);
char c;
read(fd, &c, 1);
printf("First %c\n", c);
read(fd, &c, 1);
printf("Second %c\n", c);
}
Then run with, e.g.
sudo ./a.out /sys/kernel/debug/tracing/events/tcp/tcp_set_state/id
You'll notice you're getting the first character twice, instead of the
first two characters in the id file.
Link: http://lkml.kernel.org/r/20181231115837.4932-1-elazar@lightbitslabs.com
Cc: Orit Wasserman <orit.was@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 23725aeeab ("ftrace: provide an id file for each event")
Signed-off-by: Elazar Leibovich <elazar@lightbitslabs.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When building a allmodconfig kernel for arm64 and boot that in qemu,
CONFIG_FTRACE_STARTUP_TEST gets enabled and that takes time so the
watchdog expires and prints out a message like this:
'watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [swapper/0:1]'
Depending on what the what test gets called from init_trace_selftests()
it stays minutes in the loop.
Rework so that function cond_resched() gets called in the
init_trace_selftests loop.
Link: http://lkml.kernel.org/r/20181130145622.26334-1-anders.roxell@linaro.org
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Trivial fix to clean up an indentation issue, a whole chunk of code
has an extra space in the indentation.
Link: http://lkml.kernel.org/r/20181109132312.20994-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Automatic const char[] variables cause unnecessary code
generation. For example, the this_mod variable leads to
3f04: 48 b8 5f 5f 74 68 69 73 5f 6d movabs $0x6d5f736968745f5f,%rax # __this_m
3f0e: 4c 8d 44 24 02 lea 0x2(%rsp),%r8
3f13: 48 8d 7c 24 10 lea 0x10(%rsp),%rdi
3f18: 48 89 44 24 02 mov %rax,0x2(%rsp)
3f1d: 4c 89 e9 mov %r13,%rcx
3f20: b8 65 00 00 00 mov $0x65,%eax # e
3f25: 48 c7 c2 00 00 00 00 mov $0x0,%rdx
3f28: R_X86_64_32S .rodata.str1.1+0x18d
3f2c: be 48 00 00 00 mov $0x48,%esi
3f31: c7 44 24 0a 6f 64 75 6c movl $0x6c75646f,0xa(%rsp) # odul
3f39: 66 89 44 24 0e mov %ax,0xe(%rsp)
i.e., the string gets built on the stack at runtime. Similar code can be
found for the other instances I'm replacing here. Putting the string
in .rodata reduces the combined .text+.rodata size and saves time and
stack space at runtime.
The simplest fix, and what I've done for the this_mod case, is to just
make the variable static.
However, for the "<faulted>" case where the same string is used twice,
that prevents the linker from merging those two literals, so instead use
a macro - that also keeps the two instances automatically in
sync (instead of only the compile-time strlen expression).
Finally, for the two runs of spaces, it turns out that the "build
these strings on the stack" is not the worst part of what gcc does -
it turns print_func_help_header_irq() into "if (tgid) { /*
print_event_info + five seq_printf calls */ } else { /* print
event_info + another five seq_printf */}". Taking inspiration from a
suggestion from Al Viro, use %.*s to make snprintf either stop after
the first two spaces or print the whole string. As a bonus, the
seq_printfs now fit on single lines (at least, they are not longer
than the existing ones in the function just above), making it easier
to see that the ascii art lines up.
x86-64 defconfig + CONFIG_FUNCTION_TRACER:
$ scripts/stackdelta /tmp/stackusage.{0,1}
./kernel/trace/ftrace.c ftrace_mod_callback 152 136 -16
./kernel/trace/trace.c trace_default_header 56 32 -24
./kernel/trace/trace.c tracing_mark_raw_write 96 72 -24
./kernel/trace/trace.c tracing_mark_write 104 80 -24
bloat-o-meter
add/remove: 1/0 grow/shrink: 0/4 up/down: 14/-375 (-361)
Function old new delta
this_mod - 14 +14
ftrace_mod_callback 577 542 -35
tracing_mark_raw_write 444 374 -70
tracing_mark_write 616 540 -76
trace_default_header 600 406 -194
Link: http://lkml.kernel.org/r/20190320081757.6037-1-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix to make the type of $comm "string". If we set the other type to $comm
argument, it shows meaningless value or wrong data. Currently probe events
allow us to set string array type (e.g. ":string[2]"), or other digit types
like x8 on $comm. But since clearly $comm is just a string data, it should
not be fetched by other types including array.
Link: http://lkml.kernel.org/r/155723736241.9149.14582064184468574539.stgit@devnote2
Cc: Andreas Ziegler <andreas.ziegler@fau.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 533059281e ("tracing: probeevent: Introduce new argument fetching code")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Do not accumulate strlen result on "ret" local variable, because
it is accumulated on "total" local variable for array case.
Link: http://lkml.kernel.org/r/155723735237.9149.3192150444705457531.stgit@devnote2
Fixes: 40b53b7718 ("tracing: probeevent: Add array type support")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Since commit 533059281e ("tracing: probeevent: Introduce new
argument fetching code") dropped the $comm support from uprobe
events, this re-enables it.
For $comm support, uses strlcpy() instead of strncpy_from_user()
to copy current task's comm. Because it is in the kernel space,
strncpy_from_user() always fails to copy the comm.
This also uses strlen() instead of strnlen_user() to measure the
length of the comm.
Note that this uses -ECOMM as a token value to fetch the comm
string. If the user-space pointer points -ECOMM, it will be
translated to task->comm.
Link: http://lkml.kernel.org/r/155723734162.9149.4042756162201097965.stgit@devnote2
Fixes: 533059281e ("tracing: probeevent: Introduce new argument fetching code")
Reported-by: Andreas Ziegler <andreas.ziegler@fau.de>
Acked-by: Andreas Ziegler <andreas.ziegler@fau.de>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pull networking updates from David Miller:
"Highlights:
1) Support AES128-CCM ciphers in kTLS, from Vakul Garg.
2) Add fib_sync_mem to control the amount of dirty memory we allow to
queue up between synchronize RCU calls, from David Ahern.
3) Make flow classifier more lockless, from Vlad Buslov.
4) Add PHY downshift support to aquantia driver, from Heiner
Kallweit.
5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces
contention on SLAB spinlocks in heavy RPC workloads.
6) Partial GSO offload support in XFRM, from Boris Pismenny.
7) Add fast link down support to ethtool, from Heiner Kallweit.
8) Use siphash for IP ID generator, from Eric Dumazet.
9) Pull nexthops even further out from ipv4/ipv6 routes and FIB
entries, from David Ahern.
10) Move skb->xmit_more into a per-cpu variable, from Florian
Westphal.
11) Improve eBPF verifier speed and increase maximum program size,
from Alexei Starovoitov.
12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit
spinlocks. From Neil Brown.
13) Allow tunneling with GUE encap in ipvs, from Jacky Hu.
14) Improve link partner cap detection in generic PHY code, from
Heiner Kallweit.
15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan
Maguire.
16) Remove SKB list implementation assumptions in SCTP, your's truly.
17) Various cleanups, optimizations, and simplifications in r8169
driver. From Heiner Kallweit.
18) Add memory accounting on TX and RX path of SCTP, from Xin Long.
19) Switch PHY drivers over to use dynamic featue detection, from
Heiner Kallweit.
20) Support flow steering without masking in dpaa2-eth, from Ioana
Ciocoi.
21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri
Pirko.
22) Increase the strict parsing of current and future netlink
attributes, also export such policies to userspace. From Johannes
Berg.
23) Allow DSA tag drivers to be modular, from Andrew Lunn.
24) Remove legacy DSA probing support, also from Andrew Lunn.
25) Allow ll_temac driver to be used on non-x86 platforms, from Esben
Haabendal.
26) Add a generic tracepoint for TX queue timeouts to ease debugging,
from Cong Wang.
27) More indirect call optimizations, from Paolo Abeni"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits)
cxgb4: Fix error path in cxgb4_init_module
net: phy: improve pause mode reporting in phy_print_status
dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings
net: macb: Change interrupt and napi enable order in open
net: ll_temac: Improve error message on error IRQ
net/sched: remove block pointer from common offload structure
net: ethernet: support of_get_mac_address new ERR_PTR error
net: usb: smsc: fix warning reported by kbuild test robot
staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check
net: dsa: support of_get_mac_address new ERR_PTR error
net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats
vrf: sit mtu should not be updated when vrf netdev is the link
net: dsa: Fix error cleanup path in dsa_init_module
l2tp: Fix possible NULL pointer dereference
taprio: add null check on sched_nest to avoid potential null pointer dereference
net: mvpp2: cls: fix less than zero check on a u32 variable
net_sched: sch_fq: handle non connected flows
net_sched: sch_fq: do not assume EDT packets are ordered
net: hns3: use devm_kcalloc when allocating desc_cb
net: hns3: some cleanup for struct hns3_enet_ring
...
Pull x86 mm updates from Ingo Molnar:
"The changes in here are:
- text_poke() fixes and an extensive set of executability lockdowns,
to (hopefully) eliminate the last residual circumstances under
which we are using W|X mappings even temporarily on x86 kernels.
This required a broad range of surgery in text patching facilities,
module loading, trampoline handling and other bits.
- tweak page fault messages to be more informative and more
structured.
- remove DISCONTIGMEM support on x86-32 and make SPARSEMEM the
default.
- reduce KASLR granularity on 5-level paging kernels from 512 GB to
1 GB.
- misc other changes and updates"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
x86/mm: Initialize PGD cache during mm initialization
x86/alternatives: Add comment about module removal races
x86/kprobes: Use vmalloc special flag
x86/ftrace: Use vmalloc special flag
bpf: Use vmalloc special flag
modules: Use vmalloc special flag
mm/vmalloc: Add flag for freeing of special permsissions
mm/hibernation: Make hibernation handle unmapped pages
x86/mm/cpa: Add set_direct_map_*() functions
x86/alternatives: Remove the return value of text_poke_*()
x86/jump-label: Remove support for custom text poker
x86/modules: Avoid breaking W^X while loading modules
x86/kprobes: Set instruction page as executable
x86/ftrace: Set trampoline pages as executable
x86/kgdb: Avoid redundant comparison of patched code
x86/alternatives: Use temporary mm for text poking
x86/alternatives: Initialize temporary mm for patching
fork: Provide a function for copying init_mm
uprobes: Initialize uprobes earlier
x86/mm: Save debug registers when loading a temporary mm
...
Pull stack trace updates from Ingo Molnar:
"So Thomas looked at the stacktrace code recently and noticed a few
weirdnesses, and we all know how such stories of crummy kernel code
meeting German engineering perfection end: a 45-patch series to clean
it all up! :-)
Here's the changes in Thomas's words:
'Struct stack_trace is a sinkhole for input and output parameters
which is largely pointless for most usage sites. In fact if embedded
into other data structures it creates indirections and extra storage
overhead for no benefit.
Looking at all usage sites makes it clear that they just require an
interface which is based on a storage array. That array is either on
stack, global or embedded into some other data structure.
Some of the stack depot usage sites are outright wrong, but
fortunately the wrongness just causes more stack being used for
nothing and does not have functional impact.
Another oddity is the inconsistent termination of the stack trace
with ULONG_MAX. It's pointless as the number of entries is what
determines the length of the stored trace. In fact quite some call
sites remove the ULONG_MAX marker afterwards with or without nasty
comments about it. Not all architectures do that and those which do,
do it inconsistenly either conditional on nr_entries == 0 or
unconditionally.
The following series cleans that up by:
1) Removing the ULONG_MAX termination in the architecture code
2) Removing the ULONG_MAX fixups at the call sites
3) Providing plain storage array based interfaces for stacktrace
and stackdepot.
4) Cleaning up the mess at the callsites including some related
cleanups.
5) Removing the struct stack_trace based interfaces
This is not changing the struct stack_trace interfaces at the
architecture level, but it removes the exposure to the generic
code'"
* 'core-stacktrace-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits)
x86/stacktrace: Use common infrastructure
stacktrace: Provide common infrastructure
lib/stackdepot: Remove obsolete functions
stacktrace: Remove obsolete functions
livepatch: Simplify stack trace retrieval
tracing: Remove the last struct stack_trace usage
tracing: Simplify stack trace retrieval
tracing: Make ftrace_trace_userstack() static and conditional
tracing: Use percpu stack trace buffer more intelligently
tracing: Simplify stacktrace retrieval in histograms
lockdep: Simplify stack trace handling
lockdep: Remove save argument from check_prev_add()
lockdep: Remove unused trace argument from print_circular_bug()
drm: Simplify stacktrace handling
dm persistent data: Simplify stack trace handling
dm bufio: Simplify stack trace retrieval
btrfs: ref-verify: Simplify stack trace retrieval
dma/debug: Simplify stracktrace retrieval
fault-inject: Simplify stacktrace retrieval
mm/page_owner: Simplify stack trace handling
...
Pull objtool updates from Ingo Molnar:
"This is a series from Peter Zijlstra that adds x86 build-time uaccess
validation of SMAP to objtool, which will detect and warn about the
following uaccess API usage bugs and weirdnesses:
- call to %s() with UACCESS enabled
- return with UACCESS enabled
- return with UACCESS disabled from a UACCESS-safe function
- recursive UACCESS enable
- redundant UACCESS disable
- UACCESS-safe disables UACCESS
As it turns out not leaking uaccess permissions outside the intended
uaccess functionality is hard when the interfaces are complex and when
such bugs are mostly dormant.
As a bonus we now also check the DF flag. We had at least one
high-profile bug in that area in the early days of Linux, and the
checking is fairly simple. The checks performed and warnings emitted
are:
- call to %s() with DF set
- return with DF set
- return with modified stack frame
- recursive STD
- redundant CLD
It's all x86-only for now, but later on this can also be used for PAN
on ARM and objtool is fairly cross-platform in principle.
While all warnings emitted by this new checking facility that got
reported to us were fixed, there might be GCC version dependent
warnings that were not reported yet - which we'll address, should they
trigger.
The warnings are non-fatal build warnings"
* 'core-objtool-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
mm/uaccess: Use 'unsigned long' to placate UBSAN warnings on older GCC versions
x86/uaccess: Dont leak the AC flag into __put_user() argument evaluation
sched/x86_64: Don't save flags on context switch
objtool: Add Direction Flag validation
objtool: Add UACCESS validation
objtool: Fix sibling call detection
objtool: Rewrite alt->skip_orig
objtool: Add --backtrace support
objtool: Rewrite add_ignores()
objtool: Handle function aliases
objtool: Set insn->func for alternatives
x86/uaccess, kcov: Disable stack protector
x86/uaccess, ftrace: Fix ftrace_likely_update() vs. SMAP
x86/uaccess, ubsan: Fix UBSAN vs. SMAP
x86/uaccess, kasan: Fix KASAN vs SMAP
x86/smap: Ditch __stringify()
x86/uaccess: Introduce user_access_{save,restore}()
x86/uaccess, signal: Fix AC=1 bloat
x86/uaccess: Always inline user_access_begin()
x86/uaccess, xen: Suppress SMAP warnings
...
The 'ftdump' command in kdb is currently a bit of a last resort, at
least if you have lots of traces turned on. It's going to print a
whole boatload of data out your serial port which is probably running
at 115200. This could easily take many, many minutes.
Usually you're most interested in what's at the _end_ of the ftrace
buffer, AKA what happened most recently. That means you've got to
wait the full time for the dump. The 'ftdump' command does attempt to
help you a little bit by allowing you to skip a fixed number of
entries. Unfortunately it provides no way for you to know how many
entries you should skip.
Let's do similar to python and allow you to use a negative number to
indicate that you want to skip all entries except the last few. This
allows you to quickly see what you want.
Note that we also change the printout in ftdump to print the
(positive) number of entries actually skipped since that could be
helpful to know when you've specified a negative skip count.
Link: http://lkml.kernel.org/r/20190319171206.97107-3-dianders@chromium.org
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
These two new exported functions will be used in a future patch by
kdb_ftdump() to quickly skip all but the last few trace entries.
Link: http://lkml.kernel.org/r/20190319171206.97107-2-dianders@chromium.org
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The things skipped by kdb's "ftdump" command when you pass it a
parameter has always been entries, not lines. The difference usually
doesn't matter but when the trace buffer has multi-line entries (like
a stack dump) it can matter.
Let's fix this both in the help text for ftdump and also in the local
variable names.
Link: http://lkml.kernel.org/r/20190319171206.97107-1-dianders@chromium.org
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When using a temporary mm, bpf_probe_write_user() should not be able to
write to user memory, since user memory addresses may be used to map
kernel memory. Detect these cases and fail bpf_probe_write_user() in
such cases.
Suggested-by: Jann Horn <jannh@google.com>
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <akpm@linux-foundation.org>
Cc: <ard.biesheuvel@linaro.org>
Cc: <deneen.t.dock@intel.com>
Cc: <kernel-hardening@lists.openwall.com>
Cc: <kristen@linux.intel.com>
Cc: <linux_dti@icloud.com>
Cc: <will.deacon@arm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190426001143.4983-24-namit@vmware.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It's only used in trace.c and there is absolutely no point in compiling it
in when user space stack traces are not supported.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: linux-mm@kvack.org
Cc: David Rientjes <rientjes@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: kasan-dev@googlegroups.com
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: iommu@lists.linux-foundation.org
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: David Sterba <dsterba@suse.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: linux-btrfs@vger.kernel.org
Cc: dm-devel@redhat.com
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: David Airlie <airlied@linux.ie>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: linux-arch@vger.kernel.org
Link: https://lkml.kernel.org/r/20190425094803.162400595@linutronix.de
The per cpu stack trace buffer usage pattern is odd at best. The buffer has
place for 512 stack trace entries on 64-bit and 1024 on 32-bit. When
interrupts or exceptions nest after the per cpu buffer was acquired the
stacktrace length is hardcoded to 8 entries. 512/1024 stack trace entries
in kernel stacks are unrealistic so the buffer is a complete waste.
Split the buffer into 4 nest levels, which are 128/256 entries per
level. This allows nesting contexts (interrupts, exceptions) to utilize the
cpu buffer for stack retrieval and avoids the fixed length allocation along
with the conditional execution pathes.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: linux-mm@kvack.org
Cc: David Rientjes <rientjes@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: kasan-dev@googlegroups.com
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: iommu@lists.linux-foundation.org
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: David Sterba <dsterba@suse.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: linux-btrfs@vger.kernel.org
Cc: dm-devel@redhat.com
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: David Airlie <airlied@linux.ie>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: linux-arch@vger.kernel.org
Link: https://lkml.kernel.org/r/20190425094803.066064076@linutronix.de
- Remove the extra array member of stack_dump_trace[] along with the
ARRAY_SIZE - 1 initialization for struct stack_trace :: max_entries.
Both are historical leftovers of no value. The stack tracer never exceeds
the array and there is no extra storage requirement either.
- Make variables which are only used in trace_stack.c static.
- Simplify the enable/disable logic.
- Rename stack_trace_print() as it's using the stack_trace_ namespace. Free
the name up for stack trace related functions.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: linux-mm@kvack.org
Cc: David Rientjes <rientjes@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: kasan-dev@googlegroups.com
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: iommu@lists.linux-foundation.org
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: David Sterba <dsterba@suse.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: linux-btrfs@vger.kernel.org
Cc: dm-devel@redhat.com
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: David Airlie <airlied@linux.ie>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: linux-arch@vger.kernel.org
Link: https://lkml.kernel.org/r/20190425094801.230654524@linutronix.de
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-04-28
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Introduce BPF socket local storage map so that BPF programs can store
private data they associate with a socket (instead of e.g. separate hash
table), from Martin.
2) Add support for bpftool to dump BTF types. This is done through a new
`bpftool btf dump` sub-command, from Andrii.
3) Enable BPF-based flow dissector for skb-less eth_get_headlen() calls which
was currently not supported since skb was used to lookup netns, from Stanislav.
4) Add an opt-in interface for tracepoints to expose a writable context
for attached BPF programs, used here for NBD sockets, from Matt.
5) BPF xadd related arm64 JIT fixes and scalability improvements, from Daniel.
6) Change the skb->protocol for bpf_skb_adjust_room() helper in order to
support tunnels such as sit. Add selftests as well, from Willem.
7) Various smaller misc fixes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This is an opt-in interface that allows a tracepoint to provide a safe
buffer that can be written from a BPF_PROG_TYPE_RAW_TRACEPOINT program.
The size of the buffer must be a compile-time constant, and is checked
before allowing a BPF program to attach to a tracepoint that uses this
feature.
The pointer to this buffer will be the first argument of tracepoints
that opt in; the pointer is valid and can be bpf_probe_read() by both
BPF_PROG_TYPE_RAW_TRACEPOINT and BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE
programs that attach to such a tracepoint, but the buffer to which it
points may only be written by the latter.
Signed-off-by: Matt Mullins <mmullins@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- Use "nosteal" for ring buffer splice pages
- Memory leak fix in error path of trace_pid_write()
- Fix preempt_enable_no_resched() (use preempt_enable()) in ring buffer code
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXMMoghQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qmB1AQDfpVxYxcmxibBBAM6fZyILYpKqDWmy
ut6gHZ+GHhQT4AEAwSRsC6V4yO3d5dJFpkcQXUj1v+Ip9XU+dv//s8O6tAI=
=LsG/
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Three tracing fixes:
- Use "nosteal" for ring buffer splice pages
- Memory leak fix in error path of trace_pid_write()
- Fix preempt_enable_no_resched() (use preempt_enable()) in ring
buffer code"
* tag 'trace-v5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
trace: Fix preempt_enable_no_resched() abuse
tracing: Fix a memory leak by early error exit in trace_pid_write()
tracing: Fix buffer_ref pipe ops
Unless the very next line is schedule(), or implies it, one must not use
preempt_enable_no_resched(). It can cause a preemption to go missing and
thereby cause arbitrary delays, breaking the PREEMPT=y invariant.
Link: http://lkml.kernel.org/r/20190423200318.GY14281@hirez.programming.kicks-ass.net
Cc: Waiman Long <longman@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: the arch/x86 maintainers <x86@kernel.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: huang ying <huang.ying.caritas@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: stable@vger.kernel.org
Fixes: 2c2d7329d8 ("tracing/ftrace: use preempt_enable_no_resched_notrace in ring_buffer_time_stamp()")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
In trace_pid_write(), the buffer for trace parser is allocated through
kmalloc() in trace_parser_get_init(). Later on, after the buffer is used,
it is then freed through kfree() in trace_parser_put(). However, it is
possible that trace_pid_write() is terminated due to unexpected errors,
e.g., ENOMEM. In that case, the allocated buffer will not be freed, which
is a memory leak bug.
To fix this issue, free the allocated buffer when an error is encountered.
Link: http://lkml.kernel.org/r/1555726979-15633-1-git-send-email-wang6495@umn.edu
Fixes: f4d34a87e9 ("tracing: Use pid bitmap instead of a pid array for set_event_pid")
Cc: stable@vger.kernel.org
Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This fixes multiple issues in buffer_pipe_buf_ops:
- The ->steal() handler must not return zero unless the pipe buffer has
the only reference to the page. But generic_pipe_buf_steal() assumes
that every reference to the pipe is tracked by the page's refcount,
which isn't true for these buffers - buffer_pipe_buf_get(), which
duplicates a buffer, doesn't touch the page's refcount.
Fix it by using generic_pipe_buf_nosteal(), which refuses every
attempted theft. It should be easy to actually support ->steal, but the
only current users of pipe_buf_steal() are the virtio console and FUSE,
and they also only use it as an optimization. So it's probably not worth
the effort.
- The ->get() and ->release() handlers can be invoked concurrently on pipe
buffers backed by the same struct buffer_ref. Make them safe against
concurrency by using refcount_t.
- The pointers stored in ->private were only zeroed out when the last
reference to the buffer_ref was dropped. As far as I know, this
shouldn't be necessary anyway, but if we do it, let's always do it.
Link: http://lkml.kernel.org/r/20190404215925.253531-1-jannh@google.com
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
Fixes: 73a757e631 ("ring-buffer: Return reader page back into existing ring buffer")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2019-04-22
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) allow stack/queue helpers from more bpf program types, from Alban.
2) allow parallel verification of root bpf programs, from Alexei.
3) introduce bpf sysctl hook for trusted root cases, from Andrey.
4) recognize var/datasec in btf deduplication, from Andrii.
5) cpumap performance optimizations, from Jesper.
6) verifier prep for alu32 optimization, from Jiong.
7) libbpf xsk cleanup, from Magnus.
8) other various fixes and cleanups.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The function_graph boot up self test emulates the tr->init() function in
order to add a wrapper around the function graph tracer entry code to test
for lock ups and such. But it does not emulate the tr->reset(), and just
calls the function_graph tracer tr->reset() function which will use its own
fgraph_ops to unregister function tracing with. As the fgraph_ops is
becoming more meaningful with the register_ftrace_graph() and
unregister_ftrace_graph() functions, the two need to be the same. The
emulated tr->init() uses its own fgraph_ops descriptor, which means the
unregister_ftrace_graph() must use the same ftrace_ops, which the selftest
currently does not do. By emulating the tr->reset() as the selftest does
with the tr->init() it will be able to pass the same fgraph_ops descriptor
to the unregister_ftrace_graph() as it did with the register_ftrace_graph().
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
commit f1a2e44a3a ("bpf: add queue and stack maps") introduced new BPF
helper functions:
- BPF_FUNC_map_push_elem
- BPF_FUNC_map_pop_elem
- BPF_FUNC_map_peek_elem
but they were made available only for network BPF programs. This patch
makes them available for tracepoint, cgroup and lirc programs.
Signed-off-by: Alban Crequy <alban@kinvolk.io>
Cc: Mauricio Vasquez B <mauricio.vasquez@polito.it>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Merge page ref overflow branch.
Jann Horn reported that he can overflow the page ref count with
sufficient memory (and a filesystem that is intentionally extremely
slow).
Admittedly it's not exactly easy. To have more than four billion
references to a page requires a minimum of 32GB of kernel memory just
for the pointers to the pages, much less any metadata to keep track of
those pointers. Jann needed a total of 140GB of memory and a specially
crafted filesystem that leaves all reads pending (in order to not ever
free the page references and just keep adding more).
Still, we have a fairly straightforward way to limit the two obvious
user-controllable sources of page references: direct-IO like page
references gotten through get_user_pages(), and the splice pipe page
duplication. So let's just do that.
* branch page-refs:
fs: prevent page refcount overflow in pipe_buf_get
mm: prevent get_user_pages() from overflowing page refcount
mm: add 'try_get_page()' helper function
mm: make page ref count overflow check tighter and more explicit
No architecture terminates the stack trace with ULONG_MAX anymore. As the
code checks the number of entries stored anyway there is no point in
keeping all that ULONG_MAX magic around.
The histogram code zeroes the storage before saving the stack, so if the
trace is shorter than the maximum number of entries it can terminate the
print loop if a zero entry is detected.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Alexander Potapenko <glider@google.com>
Link: https://lkml.kernel.org/r/20190410103645.048761764@linutronix.de
Change pipe_buf_get() to return a bool indicating whether it succeeded
in raising the refcount of the page (if the thing in the pipe is a page).
This removes another mechanism for overflowing the page refcount. All
callers converted to handle a failure.
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The function_graph tracer has a stub function and its ops flag has the
FTRACE_OPS_FL_STUB set. As the function graph does not use the
ftrace_ops->func pointer but instead is called by a separate part of the
ftrace trampoline. The function_graph tracer still requires to pass in a
ftrace_ops that may also hold the hash of the functions to call. But there's
no reason to test that hash in the function tracing portion. Instead of
testing to see if we should call the stub function, just test if the ops has
FTRACE_OPS_FL_STUB set, and just skip it.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The ASSIGN_OPS_HASH() macro was moved to fgraph.c where it was used, but for
some reason it wasn't removed from ftrace.c, as it is no longer referenced
there.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As each instance has their own error_log file, it makes more sense that the
instances show the errors of their own instead of all error_logs having the
same data. Make it that the errors show up in the instance error_log file
that the error happens in. If no instance trace_array is available, then
NULL can be passed in which will create the error in the top level instance
(the one at the top of the tracefs directory).
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Have the trace_array that associates the trace instance of the histogram
passed around to functions so that error handling can display the error
message in the proper instance.
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pass in the trace_array that represents the instance the filter being
changed is in to create_event_filter(). This will allow for error messages
that happen when writing to the filter can be displayed in the proper
instance "error_log" file.
Note, for calls to create_filter() (that was also modified to support
create_event_filter()), that changes filters that do not exist in a instance
(for perf for example), NULL may be passed in, which means that there will
not be any message to log for that filter.
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
gpio tracing was made configurable in 4.4-rc1 (commit ddd70280bf
("tracing: gpio: Add Kconfig option for enabling/disabling trace
events")). Since then it is the only event type that can be compiled
conditionally. Given that there is only little overhead I don't
understand the reasoning and I was annoyed more than once that gpio
events were not available without recompiling.
So drop the Kconfig symbol and make gpio events available
unconditionally.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The only users that calls syscall_get_arguments() with a variable and not a
hard coded '6' is ftrace_syscall_enter(). syscall_get_arguments() can be
optimized by removing a variable input, and always grabbing 6 arguments
regardless of what the system call actually uses.
Change ftrace_syscall_enter() to pass the 6 args into a local stack array
and copy the necessary arguments into the trace event as needed.
This is needed to remove two parameters from syscall_get_arguments().
Link: http://lkml.kernel.org/r/20161107213233.627583542@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
For CONFIG_TRACE_BRANCH_PROFILING=y the likely/unlikely things get
overloaded and generate callouts to this code, and thus also when
AC=1.
Make it safe.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use tracing error_log with probe events for logging error more
precisely. This also makes all parse error returns -EINVAL
(except for -ENOMEM), because user can see better error message
in error_log file now.
Link: http://lkml.kernel.org/r/6a4d90e141d138040ea61f4776b991597077451e.1554072478.git.tom.zanussi@linux.intel.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Use tracing_log_err() from the new tracing error_log mechanism to send
filter parse errors to tracing/error_log.
With this change, users will be able to see filter errors by looking
at tracing/error_log.
The same errors will also be available in the filter file, as
expected.
Link: http://lkml.kernel.org/r/1d942c419941539a11d78a6810fc5740a99b2974.1554072478.git.tom.zanussi@linux.intel.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Replace hist_err() and hist_err_event() with tracing_log_err() from
the new tracing error_log mechanism.
Also add a couple related helper functions and remove most of the old
hist_err()-related code.
With this change, users no longer read the hist files for hist trigger
error information, but instead look at tracing/error_log for the same
information.
Link: http://lkml.kernel.org/r/c98f77a97c9715d18b623eeb5741057b330d5ac0.1554072478.git.tom.zanussi@linux.intel.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
In preparation for making use of the new trace error log, save the
subsystem and event name associated with the last hist command - it
will be passed as the location param in the event_log_err() calls.
Link: http://lkml.kernel.org/r/eb0fd1362be8f39facb86c83eecf441b7a5876f8.1554072478.git.tom.zanussi@linux.intel.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Introduce a new ftrace file, tracing/error_log, for ftrace commands to
log errors. This is useful for allowing more complex commands such as
hist trigger and kprobe_event commands to point out specifically where
something may have gone wrong without forcing them to resort to more
ad hoc methods such as tacking error messages onto existing output
files.
To log a tracing error, call the event_log_err() function, passing it
a location string describing where it came from e.g. kprobe_events or
system:event, the command that caused the error, an array of static
error strings describing errors and an index within that array which
describes the specific error, along with the position to place the
error caret.
Reading the log displays the last (currently) 8 errors logged in the
following format:
[timestamp] <loc>: error: <static error text>
Command: <command that caused the error>
^
Memory for the error log isn't allocated unless there has been a trace
event error, and the error log can be cleared and have its memory
freed by writing the empty string in truncation mode to it:
# echo > tracing/error_log.
Link: http://lkml.kernel.org/r/0c2c82571fd38c5f3a88ca823627edff250e9416.1554072478.git.tom.zanussi@linux.intel.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Suggested-by: Masami Hiramatsu <mhiramat@kernel.org>
Improvements-suggested-by: Steve Rostedt <rostedt@goodmis.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Ftrace provides the feature “instances” that provides the capability to
create multiple Ftrace ring buffers. However, currently these buffers
are created/accessed via userspace only. The kernel APIs providing these
features are not exported, hence cannot be used by other kernel
components.
This patch aims to extend this infrastructure to provide the
flexibility to create/log/remove/ enable-disable existing trace events
to these buffers from within the kernel.
Link: http://lkml.kernel.org/r/1553106531-3281-2-git-send-email-divya.indi@oracle.com
Signed-off-by: Divya Indi <divya.indi@oracle.com>
Reviewed-by: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix compile warning in create_dyn_event(): 'ret' may be used uninitialized
in this function [-Wuninitialized].
Link: http://lkml.kernel.org/r/1553237900-8555-1-git-send-email-frowand.list@gmail.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Fixes: 5448d44c38 ("tracing: Add unified dynamic event framework")
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----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=qBae
-----END PGP SIGNATURE-----
Merge tag 'for-5.1/block-post-20190315' of git://git.kernel.dk/linux-block
Pull more block layer changes from Jens Axboe:
"This is a collection of both stragglers, and fixes that came in after
I finalized the initial pull. This contains:
- An MD pull request from Song, with a few minor fixes
- Set of NVMe patches via Christoph
- Pull request from Konrad, with a few fixes for xen/blkback
- pblk fix IO calculation fix (Javier)
- Segment calculation fix for pass-through (Ming)
- Fallthrough annotation for blkcg (Mathieu)"
* tag 'for-5.1/block-post-20190315' of git://git.kernel.dk/linux-block: (25 commits)
blkcg: annotate implicit fall through
nvme-tcp: support C2HData with SUCCESS flag
nvmet: ignore EOPNOTSUPP for discard
nvme: add proper write zeroes setup for the multipath device
nvme: add proper discard setup for the multipath device
nvme: remove nvme_ns_config_oncs
nvme: disable Write Zeroes for qemu controllers
nvmet-fc: bring Disconnect into compliance with FC-NVME spec
nvmet-fc: fix issues with targetport assoc_list list walking
nvme-fc: reject reconnect if io queue count is reduced to zero
nvme-fc: fix numa_node when dev is null
nvme-fc: use nr_phys_segments to determine existence of sgl
nvme-loop: init nvmet_ctrl fatal_err_work when allocate
nvme: update comment to make the code easier to read
nvme: put ns_head ref if namespace fails allocation
nvme-trace: fix cdw10 buffer overrun
nvme: don't warn on block content change effects
nvme: add get-feature to admin cmds tracer
md: Fix failed allocation of md_register_thread
It's wrong to add len to sector_nr in raid10 reshape twice
...
error checks.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXIukmxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qi+PAQCKf6Yz7LZ3oBtjKy7jJRhkAn3Ie5Ls
n7KOXnOGntO1cgD/RdynJcFtpwgDxuj7L/c3iInel0B/rdU5VLbglXy+2AA=
=y/ft
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes and cleanups from Steven Rostedt:
"This contains a series of last minute clean ups, small fixes and error
checks"
* tag 'trace-v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/probe: Verify alloc_trace_*probe() result
tracing/probe: Check event/group naming rule at parsing
tracing/probe: Check the size of argument name and body
tracing/probe: Check event name length correctly
tracing/probe: Check maxactive error cases
tracing: kdb: Fix ftdump to not sleep
trace/probes: Remove kernel doc style from non kernel doc comment
tracing/probes: Make reserved_field_names static
Since alloc_trace_*probe() returns -EINVAL only if !event && !group,
it should not happen in trace_*probe_create(). If we catch that case
there is a bug. So use WARN_ON_ONCE() instead of pr_info().
Link: http://lkml.kernel.org/r/155253785078.14922.16902223633734601469.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Ensure given name of event is not too long when parsing it,
and fix to update event name offset correctly when the group
name is given. For example, this makes probe event to check
the "p:foo/" error case correctly.
Link: http://lkml.kernel.org/r/155253782046.14922.14724124823730168629.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Check maxactive on kprobe error case, because maxactive
is only for kretprobe, not for kprobe. Also, maxactive
should not be 0, it should be at least 1.
Link: http://lkml.kernel.org/r/155253780952.14922.15784129810238750331.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
There is a plan to build the kernel with -Wimplicit-fallthrough and
this place in the code produced a warning (W=1).
This commit remove the following warning:
kernel/trace/blktrace.c:725:9: warning: this statement may fall through [-Wimplicit-fallthrough=]
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As reported back in 2016-11 [1], the "ftdump" kdb command triggers a
BUG for "sleeping function called from invalid context".
kdb's "ftdump" command wants to call ring_buffer_read_prepare() in
atomic context. A very simple solution for this is to add allocation
flags to ring_buffer_read_prepare() so kdb can call it without
triggering the allocation error. This patch does that.
Note that in the original email thread about this, it was suggested
that perhaps the solution for kdb was to either preallocate the buffer
ahead of time or create our own iterator. I'm hoping that this
alternative of adding allocation flags to ring_buffer_read_prepare()
can be considered since it means I don't need to duplicate more of the
core trace code into "trace_kdb.c" (for either creating my own
iterator or re-preparing a ring allocator whose memory was already
allocated).
NOTE: another option for kdb is to actually figure out how to make it
reuse the existing ftrace_dump() function and totally eliminate the
duplication. This sounds very appealing and actually works (the "sr
z" command can be seen to properly dump the ftrace buffer). The
downside here is that ftrace_dump() fully consumes the trace buffer.
Unless that is changed I'd rather not use it because it means "ftdump
| grep xyz" won't be very useful to search the ftrace buffer since it
will throw away the whole trace on the first grep. A future patch to
dump only the last few lines of the buffer will also be hard to
implement.
[1] https://lkml.kernel.org/r/20161117191605.GA21459@google.com
Link: http://lkml.kernel.org/r/20190308193205.213659-1-dianders@chromium.org
Reported-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pull misc vfs updates from Al Viro:
"Assorted fixes (really no common topic here)"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: Make __vfs_write() static
vfs: fix preadv64v2 and pwritev64v2 compat syscalls with offset == -1
pipe: stop using ->can_merge
splice: don't merge into linked buffers
fs: move generic stat response attr handling to vfs_getattr_nosec
orangefs: don't reinitialize result_mask in ->getattr
fs/devpts: always delete dcache dentry-s in dput()
CC kernel/trace/trace_kprobe.o
kernel/trace/trace_kprobe.c:41: warning: cannot understand function prototype: 'struct trace_kprobe '
The real problem is that a comment looked like kerneldoc when it shouldn't be...
Link: http://lkml.kernel.org/r/2812.1552381112@turing-police
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
sparse complains:
CHECK kernel/trace/trace_probe.c
kernel/trace/trace_probe.c:16:12: warning: symbol 'reserved_field_names' was not declared. Should it be static?
Yes, it should be static.
Link: http://lkml.kernel.org/r/2478.1552380778@turing-police
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
- Add "onchange(var)" histogram handler that executes a action when $var
changes.
- Add new "snapshot()" action for histogram handlers, that causes a
snapshot of the ring buffer when triggered.
ie. onchange(var).snapshot() will trigger a snapshot if var changes.
- Add alternative for "trace()" action.
Currently, to trigger a synthetic event, the name of that event is used
as the handler name, which is inconsistent with the other actions.
onchange(var).synthetic(param) where it can now be
onchange(var).trace(synthetic, param). The older method will still be
allowed, as long as the synthetic events do not overlap with other
handler names.
- The histogram documentation at testcases were updated for the new
changes.
Added a quicker way to enable set_ftrace_filter files, that will make
it much quicker to bisect tracing a function that shouldn't be traced and
crashes the kernel. (You can echo in numbers to set_ftrace_filter, and it
will select the corresponding function that is in
available_filter_functions).
Some better displaying of the tracing data (and more information was added).
The rest are small fixes and more clean ups to the code.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXIXXjRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qrSJAQCbGXAvZE+shfKRhbU1cu1C1nwRMHhH
eeRecJs1RChGFgD/TwatD4FzARQPjfk7snQD5KWPpoRc9grUACC2cZcaWwQ=
=LVBI
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"The biggest change for this release is in the histogram code:
- Add "onchange(var)" histogram handler that executes a action when
$var changes.
- Add new "snapshot()" action for histogram handlers, that causes a
snapshot of the ring buffer when triggered. ie.
onchange(var).snapshot() will trigger a snapshot if var changes.
- Add alternative for "trace()" action. Currently, to trigger a
synthetic event, the name of that event is used as the handler
name, which is inconsistent with the other actions.
onchange(var).synthetic(param) where it can now be
onchange(var).trace(synthetic, param). The older method will still
be allowed, as long as the synthetic events do not overlap with
other handler names.
- The histogram documentation at testcases were updated for the new
changes.
Outside of the histogram code, we have:
- Added a quicker way to enable set_ftrace_filter files, that will
make it much quicker to bisect tracing a function that shouldn't be
traced and crashes the kernel. (You can echo in numbers to
set_ftrace_filter, and it will select the corresponding function
that is in available_filter_functions).
- Some better displaying of the tracing data (and more information
was added).
The rest are small fixes and more clean ups to the code"
* tag 'trace-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (37 commits)
tracing: Use strncpy instead of memcpy when copying comm in trace.c
tracing: Use strncpy instead of memcpy when copying comm for hist triggers
tracing: Use strncpy instead of memcpy for string keys in hist triggers
tracing: Use str_has_prefix() in synth_event_create()
x86/ftrace: Fix warning and considate ftrace_jmp_replace() and ftrace_call_replace()
tracing/perf: Use strndup_user() instead of buggy open-coded version
doc: trace: Fix documentation for uprobe_profile
tracing: Fix spelling mistake: "analagous" -> "analogous"
tracing: Comment why cond_snapshot is checked outside of max_lock protection
tracing: Add hist trigger action 'expected fail' test case
tracing: Add alternative synthetic event trace action test case
tracing: Add hist trigger onchange() handler test case
tracing: Add hist trigger snapshot() action test case
tracing: Add SPDX license GPL-2.0 license identifier to inter-event testcases
tracing: Add alternative synthetic event trace action syntax
tracing: Add hist trigger onchange() handler Documentation
tracing: Add hist trigger onchange() handler
tracing: Add hist trigger snapshot() action Documentation
tracing: Add hist trigger snapshot() action
tracing: Add conditional snapshot
...
- do not generate unneeded top-level built-in.a
- let git ignore O= directory entirely
- optimize scripts/kallsyms slightly
- exclude DWARF info from *.s regardless of config options
- fix GCC toolchain search path for Clang to prepare ld.lld support
- do not generate modules.order when CONFIG_MODULES is disabled
- simplify single target rules and remove VPATH for external module build
- allow to add optional flags to dpkg-buildpackage when building deb-pkg
- move some compiler option tests from Makefile to Kconfig
- various Makefile cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJcgxYUAAoJED2LAQed4NsGr7YQAJq4LmN/aZDI9Mt0YAQjEyyA
PCpm8J2HI9HO1sMoY7J/ksWmV0BU25G+uspKD7dXAQo3l9fmahQM5e4dsyZ4Xqs8
DyyYSGtJJnMJaWmupIZNA4UKDCVtwPoVW8YeuK9rwADVokCux9avogof9O1OoA/E
Pylo+I4UCM82kbpZSd+UxnCx6B0v8XGtW+d31Q4yZXCkw5nw14chrlaprcqB3UgB
+7C3xOnDWCi7gyxaTqmD7dLay2DM8KCDlznEvBL733Y/cK3to1fywzEPzp0JQCLX
BLgmmpW13NF++q5BCoTW6sFjZAhBVbiYZwesMrCi75Y32T8zt4G5l4pkvGkSuGF/
UQh5aoCxaMIp70VPj/loZ0lh78nwVGTok9zRb0rfztM0X4DbmiPi5MNiHRzRpIeE
1jjEa/GK1t0TDnXc/MuDFK8cWwdhttIqUL5yWfAxjXbtP27eLtsopQUdW7EPHs7d
sMnfuSUuhOC28yByVxIkBcwawLyYrcWRphJ3ixCO70CoJWt2DT6aOKxcFJefoJix
Pto6Oo3oQ4iypMM5M9/0Uo+AK2TKRejWIqtZdbo+ir70tNxVH3WDZq++fG0drXOB
r2I/GY6nRjuzLOe2jzEqywFTFd2xpk4Qo84LGb1R3U6aU5qS2gA0W/q00JS5c2qU
R8uReJ7bvmLmrVNZ/NI4
=y9YG
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- do not generate unneeded top-level built-in.a
- let git ignore O= directory entirely
- optimize scripts/kallsyms slightly
- exclude DWARF info from *.s regardless of config options
- fix GCC toolchain search path for Clang to prepare ld.lld support
- do not generate modules.order when CONFIG_MODULES is disabled
- simplify single target rules and remove VPATH for external module
build
- allow to add optional flags to dpkg-buildpackage when building
deb-pkg
- move some compiler option tests from Makefile to Kconfig
- various Makefile cleanups
* tag 'kbuild-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (40 commits)
kbuild: remove scripts/basic/% build target
kbuild: use -Werror=implicit-... instead of -Werror-implicit-...
kbuild: clean up scripts/gcc-version.sh
kbuild: remove cc-version macro
kbuild: update comment block of scripts/clang-version.sh
kbuild: remove commented-out INITRD_COMPRESS
kbuild: move -gsplit-dwarf, -gdwarf-4 option tests to Kconfig
kbuild: [bin]deb-pkg: add DPKG_FLAGS variable
kbuild: move ".config not found!" message from Kconfig to Makefile
kbuild: invoke syncconfig if include/config/auto.conf.cmd is missing
kbuild: simplify single target rules
kbuild: remove empty rules for makefiles
kbuild: make -r/-R effective in top Makefile for old Make versions
kbuild: move tools_silent to a more relevant place
kbuild: compute false-positive -Wmaybe-uninitialized cases in Kconfig
kbuild: refactor cc-cross-prefix implementation
kbuild: hardcode genksyms path and remove GENKSYMS variable
scripts/gdb: refactor rules for symlink creation
kbuild: create symlink to vmlinux-gdb.py in scripts_gdb target
scripts/gdb: do not descend into scripts/gdb from scripts
...
A small fix Pavel sent me back in august was accidentally lost due to it
being placed with some other patches that failed some tests, and was rebased
out of my local tree. Which was a regression that caused event filters
not to handle negative numbers.
The clean up is from Masami that realized that the code in kprobes that
calls probe_mem_read() wrapper, which is to be used in code used by both
kprobes and uprobes, was only in code for kprobes. It should not use the
wrapper there, but instead call probe_kernel_read() directly.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXH2gZRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qrTyAQC+dfxfyS32BWpGOwZbUIHGYYHtnpEB
7bIQzXy2q8r4YQD/UGJ0qoHur1gSMEIVjhIM0Qow4VepqqhthIAV/1iVbgU=
=F9yc
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.0-pre' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix/cleanup from Steven Rostedt:
"This is a "pre-pull". It's only one small fix and one small clean up.
I'm testing a few small patches for my real pull request which will
come at a later time. The second patch depends on your tree anyway so
I included it along with the urgent fix.
A small fix Pavel sent me back in august was accidentally lost due to
it being placed with some other patches that failed some tests, and
was rebased out of my local tree. Which was a regression that caused
event filters not to handle negative numbers.
The clean up is from Masami that realized that the code in kprobes
that calls probe_mem_read() wrapper, which is to be used in code used
by both kprobes and uprobes, was only in code for kprobes. It should
not use the wrapper there, but instead call probe_kernel_read()
directly"
* tag 'trace-v5.0-pre' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/kprobes: Use probe_kernel_read instead of probe_mem_read
tracing: Fix event filters and triggers to handle negative numbers
Because there may be random garbage beyond a string's null terminator,
code that might use the entire comm array e.g. histogram keys, can
give unexpected results if that garbage is copied in too, so avoid
that possibility by using strncpy instead of memcpy.
Link: http://lkml.kernel.org/r/1d6ebac26570c2a29ce9fb575379f17ef5c8b81b.1551802084.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Suggested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Because there may be random garbage beyond a string's null terminator,
code that might use the entire comm array e.g. histogram keys, can
give unexpected results if that garbage is copied in too, so avoid
that possibility by using strncpy instead of memcpy.
Link: http://lkml.kernel.org/r/1eb9f096a8086c3c82c7fc087c900005143cec54.1551802084.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Because there may be random garbage beyond a string's null terminator,
it's not correct to copy the the complete character array for use as a
hist trigger key. This results in multiple histogram entries for the
'same' string key.
So, in the case of a string key, use strncpy instead of memcpy to
avoid copying in the extra bytes.
Before, using the gdbus entries in the following hist trigger as an
example:
# echo 'hist:key=comm' > /sys/kernel/debug/tracing/events/sched/sched_waking/trigger
# cat /sys/kernel/debug/tracing/events/sched/sched_waking/hist
...
{ comm: ImgDecoder #4 } hitcount: 203
{ comm: gmain } hitcount: 213
{ comm: gmain } hitcount: 216
{ comm: StreamTrans #73 } hitcount: 221
{ comm: mozStorage #3 } hitcount: 230
{ comm: gdbus } hitcount: 233
{ comm: StyleThread#5 } hitcount: 253
{ comm: gdbus } hitcount: 256
{ comm: gdbus } hitcount: 260
{ comm: StyleThread#4 } hitcount: 271
...
# cat /sys/kernel/debug/tracing/events/sched/sched_waking/hist | egrep gdbus | wc -l
51
After:
# cat /sys/kernel/debug/tracing/events/sched/sched_waking/hist | egrep gdbus | wc -l
1
Link: http://lkml.kernel.org/r/50c35ae1267d64eee975b8125e151e600071d4dc.1549309756.git.tom.zanussi@linux.intel.com
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 79e577cbce ("tracing: Support string type key properly")
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Use probe_kernel_read() instead of probe_mem_read() because
probe_mem_read() is a kind of wrapper for switching memory
read function between uprobes and kprobes.
Link: http://lkml.kernel.org/r/20190222011643.3e19ade84a3db3e83518648f@kernel.org
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Then tracing syscall exit event it is extremely useful to filter exit
codes equal to some negative value, to react only to required errors.
But negative numbers does not work:
[root@snorch sys_exit_read]# echo "ret == -1" > filter
bash: echo: write error: Invalid argument
[root@snorch sys_exit_read]# cat filter
ret == -1
^
parse_error: Invalid value (did you forget quotes)?
Similar thing happens when setting triggers.
These is a regression in v4.17 introduced by the commit mentioned below,
testing without these commit shows no problem with negative numbers.
Link: http://lkml.kernel.org/r/20180823102534.7642-1-ptikhomirov@virtuozzo.com
Cc: stable@vger.kernel.org
Fixes: 80765597bc ("tracing: Rewrite filter logic to be simpler and faster")
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Since -Wmaybe-uninitialized was introduced by GCC 4.7, we have patched
various false positives:
- commit e74fc973b6 ("Turn off -Wmaybe-uninitialized when building
with -Os") turned off this option for -Os.
- commit 815eb71e71 ("Kbuild: disable 'maybe-uninitialized' warning
for CONFIG_PROFILE_ALL_BRANCHES") turned off this option for
CONFIG_PROFILE_ALL_BRANCHES
- commit a76bcf557e ("Kbuild: enable -Wmaybe-uninitialized warning
for "make W=1"") turned off this option for GCC < 4.9
Arnd provided more explanation in https://lkml.org/lkml/2017/3/14/903
I think this looks better by shifting the logic from Makefile to Kconfig.
Link: https://github.com/ClangBuiltLinux/linux/issues/350
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
The first version of this method was missing the check for
`ret == PATH_MAX`; then such a check was added, but it didn't call kfree()
on error, so there was still a small memory leak in the error case.
Fix it by using strndup_user() instead of open-coding it.
Link: http://lkml.kernel.org/r/20190220165443.152385-1-jannh@google.com
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 0eadcc7a7b ("perf/core: Fix perf_uprobe_init()")
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Before setting tr->cond_snapshot, it must be NULL before it can be updated.
It can go to NULL when a trace event hist trigger is created or removed, and
can only be modified under the max_lock spin lock. But because it can only
be set to something other than NULL under both the max_lock spin lock as
well as the trace_types_lock, we can perform the check if it is not NULL
only under the trace_types_lock and fail out without having to grab the
max_lock spin lock.
This is very subtle, and deserves a comment.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add a 'trace(synthetic_event_name, params)' alternative to
synthetic_event_name(params).
Currently, the syntax used for generating synthetic events is to
invoke synthetic_event_name(params) i.e. use the synthetic event name
as a function call.
Users requested a new form that more explicitly shows that the
synthetic event is in effect being traced. In this version, a new
'trace()' keyword is used, and the synthetic event name is passed in
as the first argument.
In addition, for the sake of consistency with other actions, change
the documention to emphasize the trace() form over the function-call
form, which remains documented as equivalent.
Link: http://lkml.kernel.org/r/d082773e50232a001480cf837679a1e01c1a2eb7.1550100284.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add support for hist:handlerXXX($var).snapshot(), which will take a
snapshot of the current trace buffer whenever handlerXXX is hit.
As a first user, this also adds snapshot() action support for the
onmax() handler i.e. hist:onmax($var).snapshot().
Also, the hist trigger key printing is moved into a separate function
so the snapshot() action can print a histogram key outside the
histogram display - add and use hist_trigger_print_key() for that
purpose.
Link: http://lkml.kernel.org/r/2f1a952c0dcd8aca8702ce81269581a692396d45.1550100284.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Currently, tracing snapshots are context-free - they capture the ring
buffer contents at the time the tracing_snapshot() function was
invoked, and nothing else. Additionally, they're always taken
unconditionally - the calling code can decide whether or not to take a
snapshot, but the data used to make that decision is kept separately
from the snapshot itself.
This change adds the ability to associate with each trace instance
some user data, along with an 'update' function that can use that data
to determine whether or not to actually take a snapshot. The update
function can then update that data along with any other state (as part
of the data presumably), if warranted.
Because snapshots are 'global' per-instance, only one user can enable
and use a conditional snapshot for any given trace instance. To
enable a conditional snapshot (see details in the function and data
structure comments), the user calls tracing_snapshot_cond_enable().
Similarly, to disable a conditional snapshot and free it up for other
users, tracing_snapshot_cond_disable() should be called.
To actually initiate a conditional snapshot, tracing_snapshot_cond()
should be called. tracing_snapshot_cond() will invoke the update()
callback, allowing the user to decide whether or not to actually take
the snapshot and update the user-defined data associated with the
snapshot. If the callback returns 'true', tracing_snapshot_cond()
will then actually take the snapshot and return.
This scheme allows for flexibility in snapshot implementations - for
example, by implementing slightly different update() callbacks,
snapshots can be taken in situations where the user is only interested
in taking a snapshot when a new maximum in hit versus when a value
changes in any way at all. Future patches will demonstrate both
cases.
Link: http://lkml.kernel.org/r/1bea07828d5fd6864a585f83b1eed47ce097eb45.1550100284.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The action refactor code allowed actions and handlers to be separated,
but the existing onmax handler and save action code is still not
flexible enough to handle arbitrary coupling. This change generalizes
them and in the process makes additional handlers and actions easier
to implement.
The onmax action can be broken up and thought of as two separate
components - a variable to be tracked (the parameter given to the
onmax($var_to_track) function) and an invisible variable created to
save the ongoing result of doing something with that variable, such as
saving the max value of that variable so far seen.
Separating it out like this and renaming it appropriately allows us to
use the same code for similar tracking functions such as
onchange($var_to_track), which would just track the last value seen
rather than the max seen so far, which is useful in some situations.
Additionally, because different handlers and actions may want to save
and access data differently e.g. save and retrieve tracking values as
local variables vs something more global, save_val() and get_val()
interface functions are introduced and max-specific implementations
are used instead.
The same goes for the code that checks whether a maximum has been hit
- a generic check_val() interface and max-checking implementation is
used instead, which allows future patches to make use of he same code
using their own implemetations of similar functionality.
Link: http://lkml.kernel.org/r/980ea73dd8e3f36db3d646f99652f8fed42b77d4.1550100284.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Currently, the onmatch action data binds the onmatch action to data
related to synthetic event generation. Since we want to allow the
onmatch handler to potentially invoke a different action, and because
we expect other handlers to generate synthetic events, we need to
separate the data related to these two functions.
Also rename the onmatch data to something more descriptive, and create
and use common action data destroy function.
Link: http://lkml.kernel.org/r/b9abbf9aae69fe3920cdc8ddbcaad544dd258d78.1550100284.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The hist trigger action code currently implements two essentially
hard-coded pairs of 'actions' - onmax(), which tracks a variable and
saves some event fields when a max is hit, and onmatch(), which is
hard-coded to generate a synthetic event.
These hardcoded pairs (track max/save fields and detect match/generate
synthetic event) should really be decoupled into separate components
that can then be arbitrarily combined. The first component of each
pair (track max/detect match) is called a 'handler' in the new code,
while the second component (save fields/generate synthetic event) is
called an 'action' in this scheme.
This change refactors the action code to reflect this split by adding
two handlers, HANDLER_ONMATCH and HANDLER_ONMAX, along with two
actions, ACTION_SAVE and ACTION_TRACE.
The new code combines them to produce the existing ONMATCH/TRACE and
ONMAX/SAVE functionality, but doesn't implement the other combinations
now possible. Future patches will expand these to further useful
cases, such as ONMAX/TRACE, as well as add additional handlers and
actions such as ONCHANGE and SNAPSHOT.
Also, add abbreviated documentation for handlers and actions to
README.
Link: http://lkml.kernel.org/r/98bfdd48c1b4ff29fc5766442f99f5bc3c34b76b.1550100284.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Commit d716ff71dd ("tracing: Remove taking of trace_types_lock in
pipe files") use the current tracer instead of the copy in
tracing_open_pipe(), but it forget to remove the freeing sentence in
the error path.
There's an error path that can call kfree(iter->trace) after the iter->trace
was assigned to tr->current_trace, which would be bad to free.
Link: http://lkml.kernel.org/r/1550060946-45984-1-git-send-email-yi.zhang@huawei.com
Cc: stable@vger.kernel.org
Fixes: d716ff71dd ("tracing: Remove taking of trace_types_lock in pipe files")
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
- Have kprobes not use copy_from_user() to access kernel addresses,
because kprobes can legitimately poke at bad kernel memory, which
will fault. Copy from user code should never fault in kernel space.
Using probe_mem_read() can handle kernel address space faulting.
- Put back the entries counter in the tracing output that was accidentally
removed.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXGb7BxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qqvaAQC66gQ79frSW7xPjJ4Y+qLIm0YDV18i
aCHowAXxDeK3qAEA3sDeELAPVupacPrzZc6zejI+bf0HArPe08n3vlHwAQw=
=uUQj
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.0-rc4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Two more tracing fixes
- Have kprobes not use copy_from_user() to access kernel addresses,
because kprobes can legitimately poke at bad kernel memory, which
will fault. Copy from user code should never fault in kernel space.
Using probe_mem_read() can handle kernel address space faulting.
- Put back the entries counter in the tracing output that was
accidentally removed"
* tag 'trace-v5.0-rc4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix number of entries in trace header
kprobe: Do not use uaccess functions to access kernel memory that can fault
Enabling of large number of functions by echoing in a large subset of the
functions in available_filter_functions can take a very long time. The
process requires testing all functions registered by the function tracer
(which is in the 10s of thousands), and doing a kallsyms lookup to convert
the ip address into a name, then comparing that name with the string passed
in.
When a function causes the function tracer to crash the system, a binary
bisect of the available_filter_functions can be done to find the culprit.
But this requires passing in half of the functions in
available_filter_functions over and over again, which makes it basically a
O(n^2) operation. With 40,000 functions, that ends up bing 1,600,000,000
opertions! And enabling this can take over 20 minutes.
As a quick speed up, if a number is passed into one of the filter files,
instead of doing a search, it just enables the function at the corresponding
line of the available_filter_functions file. That is:
# echo 50 > set_ftrace_filter
# cat set_ftrace_filter
x86_pmu_commit_txn
# head -50 available_filter_functions | tail -1
x86_pmu_commit_txn
This allows setting of half the available_filter_functions to take place in
less than a second!
# time seq 20000 > set_ftrace_filter
real 0m0.042s
user 0m0.005s
sys 0m0.015s
# wc -l set_ftrace_filter
20000 set_ftrace_filter
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The following commit
441dae8f2f ("tracing: Add support for display of tgid in trace output")
removed the call to print_event_info() from print_func_help_header_irq()
which results in the ftrace header not reporting the number of entries
written in the buffer. As this wasn't the original intent of the patch,
re-introduce the call to print_event_info() to restore the orginal
behaviour.
Link: http://lkml.kernel.org/r/20190214152950.4179-1-quentin.perret@arm.com
Acked-by: Joel Fernandes <joelaf@google.com>
Cc: stable@vger.kernel.org
Fixes: 441dae8f2f ("tracing: Add support for display of tgid in trace output")
Signed-off-by: Quentin Perret <quentin.perret@arm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
it processes the args but does not update the remaining length
of the buffer that the string arguments will be placed in. It
constantly passes in the total size of buffer used instead of
passing in the remaining size of the buffer used. This could cause
issues if the strings are larger than the max size of an event
which could cause the strings to be written beyond what was reserved
on the buffer.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXGN7BRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qoa1AQD7+6O0DncGwk5aWqRHESXKlmOWteW6
eMFbEw3KDcvs2gEAvNLB1i2yVH6Enn50M0KpmYJMbyZK/LVn2QsPZfU/LgQ=
=KMBZ
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"This fixes kprobes/uprobes dynamic processing of strings, where it
processes the args but does not update the remaining length of the
buffer that the string arguments will be placed in. It constantly
passes in the total size of buffer used instead of passing in the
remaining size of the buffer used.
This could cause issues if the strings are larger than the max size of
an event which could cause the strings to be written beyond what was
reserved on the buffer"
* tag 'trace-v5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: probeevent: Correctly update remaining space in dynamic area
Commit 9178412ddf ("tracing: probeevent: Return consumed
bytes of dynamic area") improved the string fetching
mechanism by returning the number of required bytes after
copying the argument to the dynamic area. However, this
return value is now only used to increment the pointer
inside the dynamic area but misses updating the 'maxlen'
variable which indicates the remaining space in the dynamic
area.
This means that fetch_store_string() always reads the *total*
size of the dynamic area from the data_loc pointer instead of
the *remaining* size (and passes it along to
strncpy_from_{user,unsafe}) even if we're already about to
copy data into the middle of the dynamic area.
Link: http://lkml.kernel.org/r/20190206190013.16405-1-andreas.ziegler@fau.de
Cc: Ingo Molnar <mingo@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 9178412ddf ("tracing: probeevent: Return consumed bytes of dynamic area")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Andreas Ziegler <andreas.ziegler@fau.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pull networking fixes from David Miller:
"This pull request is dedicated to the upcoming snowpocalypse parts 2
and 3 in the Pacific Northwest:
1) Drop profiles are broken because some drivers use dev_kfree_skb*
instead of dev_consume_skb*, from Yang Wei.
2) Fix IWLWIFI kconfig deps, from Luca Coelho.
3) Fix percpu maps updating in bpftool, from Paolo Abeni.
4) Missing station release in batman-adv, from Felix Fietkau.
5) Fix some networking compat ioctl bugs, from Johannes Berg.
6) ucc_geth must reset the BQL queue state when stopping the device,
from Mathias Thore.
7) Several XDP bug fixes in virtio_net from Toshiaki Makita.
8) TSO packets must be sent always on queue 0 in stmmac, from Jose
Abreu.
9) Fix socket refcounting bug in RDS, from Eric Dumazet.
10) Handle sparse cpu allocations in bpf selftests, from Martynas
Pumputis.
11) Make sure mgmt frames have enough tailroom in mac80211, from Felix
Feitkau.
12) Use safe list walking in sctp_sendmsg() asoc list traversal, from
Greg Kroah-Hartman.
13) Make DCCP's ccid_hc_[rt]x_parse_options always check for NULL
ccid, from Eric Dumazet.
14) Need to reload WoL password into bcmsysport device after deep
sleeps, from Florian Fainelli.
15) Remove filter from mask before freeing in cls_flower, from Petr
Machata.
16) Missing release and use after free in error paths of s390 qeth
code, from Julian Wiedmann.
17) Fix lockdep false positive in dsa code, from Marc Zyngier.
18) Fix counting of ATU violations in mv88e6xxx, from Andrew Lunn.
19) Fix EQ firmware assert in qed driver, from Manish Chopra.
20) Don't default Caivum PTP to Y in kconfig, from Bjorn Helgaas"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits)
net: dsa: b53: Fix for failure when irq is not defined in dt
sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach()
geneve: should not call rt6_lookup() when ipv6 was disabled
net: Don't default Cavium PTP driver to 'y'
net: broadcom: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: via-velocity: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: tehuti: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: sun: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: fsl_ucc_hdlc: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: fec_mpc52xx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: smsc: epic100: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: dscc4: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: tulip: de2104x: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: defxx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net/mlx5e: Don't overwrite pedit action when multiple pedit used
net/mlx5e: Update hw flows when encap source mac changed
qed*: Advance drivers version to 8.37.0.20
qed: Change verbosity for coalescing message.
qede: Fix system crash on configuring channels.
qed: Consider TX tcs while deriving the max num_queues for PF.
...
Commit 6b7e633fe9 ("tracing: Remove extra zeroing out of the ring
buffer page") removed the only caller of ring_buffer_page_len(). The
function is now unused and may be removed.
Link: http://lkml.kernel.org/r/20181228133847.106177-1-mbenes@suse.cz
Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This align the behavior of wakeup tracers with irqsoff latency tracer
that we record stacktrace at the beginning and end of waking up. The
stacktrace shows us what is happening in the kernel.
Link: http://lkml.kernel.org/r/20190116160249.7554-1-changbin.du@gmail.com
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add these info fields to funcgraph wakeup tracers:
o Show CPU info since the waker could be on a different CPU.
o Show function duration and overhead.
o Show IRQ markers.
Link: http://lkml.kernel.org/r/20190101154614.8887-3-changbin.du@gmail.com
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As the predicat_parse() code is rather complex, commenting subtleties is
important. The switch case statement should be commented to describe that it
is only looking for two '&' or '|' together, which is why the fall through
to an error is after the check.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
There is a plan to build the kernel with -Wimplicit-fallthrough and
this place in the code produced a warning (W=1).
This commit remove the following warning:
kernel/trace/trace_events_filter.c:494:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
Link: http://lkml.kernel.org/r/20190114203039.16535-2-malat@debian.org
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
There is a plan to build the kernel with -Wimplicit-fallthrough and
this place in the code produced a warning (W=1).
This commit remove the following warning:
kernel/trace/trace_probe.c:302:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
Link: http://lkml.kernel.org/r/20190114203039.16535-1-malat@debian.org
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Al Viro pointed out that since there is only one pipe buffer type to which
new data can be appended, it isn't necessary to have a ->can_merge field in
struct pipe_buf_operations, we can just check for a magic type.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
For the original mode of operation it isn't needed, since we report back
errors via PERF_RECORD_LOST records in the ring buffer, but for use in
bpf_perf_event_output() it is convenient to return the errors, basically
-ENOSPC.
Currently bpf_perf_event_output() returns an error indication, the last
thing it does, which is to push it to the ring buffer is that can fail
and if so, this failure won't be reported back to its users, fix it.
Reported-by: Jamal Hadi Salim <jhs@mojatatu.com>
Tested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/r/20190118150938.GN5823@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When printing multiple uprobe arguments as strings the output for the
earlier arguments would also include all later string arguments.
This is best explained in an example:
Consider adding a uprobe to a function receiving two strings as
parameters which is at offset 0xa0 in strlib.so and we want to print
both parameters when the uprobe is hit (on x86_64):
$ echo 'p:func /lib/strlib.so:0xa0 +0(%di):string +0(%si):string' > \
/sys/kernel/debug/tracing/uprobe_events
When the function is called as func("foo", "bar") and we hit the probe,
the trace file shows a line like the following:
[...] func: (0x7f7e683706a0) arg1="foobar" arg2="bar"
Note the extra "bar" printed as part of arg1. This behaviour stacks up
for additional string arguments.
The strings are stored in a dynamically growing part of the uprobe
buffer by fetch_store_string() after copying them from userspace via
strncpy_from_user(). The return value of strncpy_from_user() is then
directly used as the required size for the string. However, this does
not take the terminating null byte into account as the documentation
for strncpy_from_user() cleary states that it "[...] returns the
length of the string (not including the trailing NUL)" even though the
null byte will be copied to the destination.
Therefore, subsequent calls to fetch_store_string() will overwrite
the terminating null byte of the most recently fetched string with
the first character of the current string, leading to the
"accumulation" of strings in earlier arguments in the output.
Fix this by incrementing the return value of strncpy_from_user() by
one if we did not hit the maximum buffer size.
Link: http://lkml.kernel.org/r/20190116141629.5752-1-andreas.ziegler@fau.de
Cc: Ingo Molnar <mingo@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 5baaa59ef0 ("tracing/probes: Implement 'memory' fetch method for uprobes")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Andreas Ziegler <andreas.ziegler@fau.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The subsystem-specific message prefix for uprobes was also
"trace_kprobe: " instead of "trace_uprobe: " as described in
the original commit message.
Link: http://lkml.kernel.org/r/20190117133023.19292-1-andreas.ziegler@fau.de
Cc: Ingo Molnar <mingo@redhat.com>
Cc: stable@vger.kernel.org
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 7257634135 ("tracing/probe: Show subsystem name in messages")
Signed-off-by: Andreas Ziegler <andreas.ziegler@fau.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.
It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access. But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.
A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model. And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.
This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.
There were a couple of notable cases:
- csky still had the old "verify_area()" name as an alias.
- the iter_iov code had magical hardcoded knowledge of the actual
values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
really used it)
- microblaze used the type argument for a debug printout
but other than those oddities this should be a total no-op patch.
I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something. Any missed conversion should be trivially fixable, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Rework of the kprobe/uprobe and synthetic events to consolidate all
the dynamic event code. This will make changes in the future easier.
- Partial rewrite of the function graph tracing infrastructure.
This will allow for multiple users of hooking onto functions
to get the callback (return) of the function. This is the ground
work for having kprobes and function graph tracer using one code base.
- Clean up of the histogram code that will facilitate adding more
features to the histograms in the future.
- Addition of str_has_prefix() and a few use cases. There currently
is a similar function strstart() that is used in a few places, but
only returns a bool and not a length. These instances will be
removed in the future to use str_has_prefix() instead.
- A few other various clean ups as well.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXCawlBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qhbcAQCFeT0fWWTUxofBQz5jqsHaRnVg21+9
X4sTldYRYEn4YgEAmWOyiwq7zvrsAu4ZwkNBMeqxn3tVymYHiGOGe3Y4BAw=
=u96o
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Rework of the kprobe/uprobe and synthetic events to consolidate all
the dynamic event code. This will make changes in the future easier.
- Partial rewrite of the function graph tracing infrastructure. This
will allow for multiple users of hooking onto functions to get the
callback (return) of the function. This is the ground work for having
kprobes and function graph tracer using one code base.
- Clean up of the histogram code that will facilitate adding more
features to the histograms in the future.
- Addition of str_has_prefix() and a few use cases. There currently is
a similar function strstart() that is used in a few places, but only
returns a bool and not a length. These instances will be removed in
the future to use str_has_prefix() instead.
- A few other various clean ups as well.
* tag 'trace-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (57 commits)
tracing: Use the return of str_has_prefix() to remove open coded numbers
tracing: Have the historgram use the result of str_has_prefix() for len of prefix
tracing: Use str_has_prefix() instead of using fixed sizes
tracing: Use str_has_prefix() helper for histogram code
string.h: Add str_has_prefix() helper function
tracing: Make function ‘ftrace_exports’ static
tracing: Simplify printf'ing in seq_print_sym
tracing: Avoid -Wformat-nonliteral warning
tracing: Merge seq_print_sym_short() and seq_print_sym_offset()
tracing: Add hist trigger comments for variable-related fields
tracing: Remove hist trigger synth_var_refs
tracing: Use hist trigger's var_ref array to destroy var_refs
tracing: Remove open-coding of hist trigger var_ref management
tracing: Use var_refs[] for hist trigger reference checking
tracing: Change strlen to sizeof for hist trigger static strings
tracing: Remove unnecessary hist trigger struct field
tracing: Fix ftrace_graph_get_ret_stack() to use task and not current
seq_buf: Use size_t for len in seq_buf_puts()
seq_buf: Make seq_buf_puts() null-terminate the buffer
arm64: Use ftrace_graph_get_ret_stack() instead of curr_ret_stack
...
-----BEGIN PGP SIGNATURE-----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=TRdW
-----END PGP SIGNATURE-----
Merge tag 'for-4.21/block-20181221' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"This is the main pull request for block/storage for 4.21.
Larger than usual, it was a busy round with lots of goodies queued up.
Most notable is the removal of the old IO stack, which has been a long
time coming. No new features for a while, everything coming in this
week has all been fixes for things that were previously merged.
This contains:
- Use atomic counters instead of semaphores for mtip32xx (Arnd)
- Cleanup of the mtip32xx request setup (Christoph)
- Fix for circular locking dependency in loop (Jan, Tetsuo)
- bcache (Coly, Guoju, Shenghui)
* Optimizations for writeback caching
* Various fixes and improvements
- nvme (Chaitanya, Christoph, Sagi, Jay, me, Keith)
* host and target support for NVMe over TCP
* Error log page support
* Support for separate read/write/poll queues
* Much improved polling
* discard OOM fallback
* Tracepoint improvements
- lightnvm (Hans, Hua, Igor, Matias, Javier)
* Igor added packed metadata to pblk. Now drives without metadata
per LBA can be used as well.
* Fix from Geert on uninitialized value on chunk metadata reads.
* Fixes from Hans and Javier to pblk recovery and write path.
* Fix from Hua Su to fix a race condition in the pblk recovery
code.
* Scan optimization added to pblk recovery from Zhoujie.
* Small geometry cleanup from me.
- Conversion of the last few drivers that used the legacy path to
blk-mq (me)
- Removal of legacy IO path in SCSI (me, Christoph)
- Removal of legacy IO stack and schedulers (me)
- Support for much better polling, now without interrupts at all.
blk-mq adds support for multiple queue maps, which enables us to
have a map per type. This in turn enables nvme to have separate
completion queues for polling, which can then be interrupt-less.
Also means we're ready for async polled IO, which is hopefully
coming in the next release.
- Killing of (now) unused block exports (Christoph)
- Unification of the blk-rq-qos and blk-wbt wait handling (Josef)
- Support for zoned testing with null_blk (Masato)
- sx8 conversion to per-host tag sets (Christoph)
- IO priority improvements (Damien)
- mq-deadline zoned fix (Damien)
- Ref count blkcg series (Dennis)
- Lots of blk-mq improvements and speedups (me)
- sbitmap scalability improvements (me)
- Make core inflight IO accounting per-cpu (Mikulas)
- Export timeout setting in sysfs (Weiping)
- Cleanup the direct issue path (Jianchao)
- Export blk-wbt internals in block debugfs for easier debugging
(Ming)
- Lots of other fixes and improvements"
* tag 'for-4.21/block-20181221' of git://git.kernel.dk/linux-block: (364 commits)
kyber: use sbitmap add_wait_queue/list_del wait helpers
sbitmap: add helpers for add/del wait queue handling
block: save irq state in blkg_lookup_create()
dm: don't reuse bio for flushes
nvme-pci: trace SQ status on completions
nvme-rdma: implement polling queue map
nvme-fabrics: allow user to pass in nr_poll_queues
nvme-fabrics: allow nvmf_connect_io_queue to poll
nvme-core: optionally poll sync commands
block: make request_to_qc_t public
nvme-tcp: fix spelling mistake "attepmpt" -> "attempt"
nvme-tcp: fix endianess annotations
nvmet-tcp: fix endianess annotations
nvme-pci: refactor nvme_poll_irqdisable to make sparse happy
nvme-pci: only set nr_maps to 2 if poll queues are supported
nvmet: use a macro for default error location
nvmet: fix comparison of a u16 with -1
blk-mq: enable IO poll if .nr_queues of type poll > 0
blk-mq: change blk_mq_queue_busy() to blk_mq_queue_inflight()
blk-mq: skip zero-queue maps in blk_mq_map_swqueue
...
Pull networking updates from David Miller:
1) New ipset extensions for matching on destination MAC addresses, from
Stefano Brivio.
2) Add ipv4 ttl and tos, plus ipv6 flow label and hop limit offloads to
nfp driver. From Stefano Brivio.
3) Implement GRO for plain UDP sockets, from Paolo Abeni.
4) Lots of work from Michał Mirosław to eliminate the VLAN_TAG_PRESENT
bit so that we could support the entire vlan_tci value.
5) Rework the IPSEC policy lookups to better optimize more usecases,
from Florian Westphal.
6) Infrastructure changes eliminating direct manipulation of SKB lists
wherever possible, and to always use the appropriate SKB list
helpers. This work is still ongoing...
7) Lots of PHY driver and state machine improvements and
simplifications, from Heiner Kallweit.
8) Various TSO deferral refinements, from Eric Dumazet.
9) Add ntuple filter support to aquantia driver, from Dmitry Bogdanov.
10) Batch dropping of XDP packets in tuntap, from Jason Wang.
11) Lots of cleanups and improvements to the r8169 driver from Heiner
Kallweit, including support for ->xmit_more. This driver has been
getting some much needed love since he started working on it.
12) Lots of new forwarding selftests from Petr Machata.
13) Enable VXLAN learning in mlxsw driver, from Ido Schimmel.
14) Packed ring support for virtio, from Tiwei Bie.
15) Add new Aquantia AQtion USB driver, from Dmitry Bezrukov.
16) Add XDP support to dpaa2-eth driver, from Ioana Ciocoi Radulescu.
17) Implement coalescing on TCP backlog queue, from Eric Dumazet.
18) Implement carrier change in tun driver, from Nicolas Dichtel.
19) Support msg_zerocopy in UDP, from Willem de Bruijn.
20) Significantly improve garbage collection of neighbor objects when
the table has many PERMANENT entries, from David Ahern.
21) Remove egdev usage from nfp and mlx5, and remove the facility
completely from the tree as it no longer has any users. From Oz
Shlomo and others.
22) Add a NETDEV_PRE_CHANGEADDR so that drivers can veto the change and
therefore abort the operation before the commit phase (which is the
NETDEV_CHANGEADDR event). From Petr Machata.
23) Add indirect call wrappers to avoid retpoline overhead, and use them
in the GRO code paths. From Paolo Abeni.
24) Add support for netlink FDB get operations, from Roopa Prabhu.
25) Support bloom filter in mlxsw driver, from Nir Dotan.
26) Add SKB extension infrastructure. This consolidates the handling of
the auxiliary SKB data used by IPSEC and bridge netfilter, and is
designed to support the needs to MPTCP which could be integrated in
the future.
27) Lots of XDP TX optimizations in mlx5 from Tariq Toukan.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1845 commits)
net: dccp: fix kernel crash on module load
drivers/net: appletalk/cops: remove redundant if statement and mask
bnx2x: Fix NULL pointer dereference in bnx2x_del_all_vlans() on some hw
net/net_namespace: Check the return value of register_pernet_subsys()
net/netlink_compat: Fix a missing check of nla_parse_nested
ieee802154: lowpan_header_create check must check daddr
net/mlx4_core: drop useless LIST_HEAD
mlxsw: spectrum: drop useless LIST_HEAD
net/mlx5e: drop useless LIST_HEAD
iptunnel: Set tun_flags in the iptunnel_metadata_reply from src
net/mlx5e: fix semicolon.cocci warnings
staging: octeon: fix build failure with XFRM enabled
net: Revert recent Spectre-v1 patches.
can: af_can: Fix Spectre v1 vulnerability
packet: validate address length if non-zero
nfc: af_nfc: Fix Spectre v1 vulnerability
phonet: af_phonet: Fix Spectre v1 vulnerability
net: core: Fix Spectre v1 vulnerability
net: minor cleanup in skb_ext_add()
net: drop the unused helper skb_ext_get()
...
Pull RCU updates from Ingo Molnar:
"The biggest RCU changes in this cycle were:
- Convert RCU's BUG_ON() and similar calls to WARN_ON() and similar.
- Replace calls of RCU-bh and RCU-sched update-side functions to
their vanilla RCU counterparts. This series is a step towards
complete removal of the RCU-bh and RCU-sched update-side functions.
( Note that some of these conversions are going upstream via their
respective maintainers. )
- Documentation updates, including a number of flavor-consolidation
updates from Joel Fernandes.
- Miscellaneous fixes.
- Automate generation of the initrd filesystem used for rcutorture
testing.
- Convert spin_is_locked() assertions to instead use lockdep.
( Note that some of these conversions are going upstream via their
respective maintainers. )
- SRCU updates, especially including a fix from Dennis Krein for a
bag-on-head-class bug.
- RCU torture-test updates"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (112 commits)
rcutorture: Don't do busted forward-progress testing
rcutorture: Use 100ms buckets for forward-progress callback histograms
rcutorture: Recover from OOM during forward-progress tests
rcutorture: Print forward-progress test age upon failure
rcutorture: Print time since GP end upon forward-progress failure
rcutorture: Print histogram of CB invocation at OOM time
rcutorture: Print GP age upon forward-progress failure
rcu: Print per-CPU callback counts for forward-progress failures
rcu: Account for nocb-CPU callback counts in RCU CPU stall warnings
rcutorture: Dump grace-period diagnostics upon forward-progress OOM
rcutorture: Prepare for asynchronous access to rcu_fwd_startat
torture: Remove unnecessary "ret" variables
rcutorture: Affinity forward-progress test to avoid housekeeping CPUs
rcutorture: Break up too-long rcu_torture_fwd_prog() function
rcutorture: Remove cbflood facility
torture: Bring any extra CPUs online during kernel startup
rcutorture: Add call_rcu() flooding forward-progress tests
rcutorture/formal: Replace synchronize_sched() with synchronize_rcu()
tools/kernel.h: Replace synchronize_sched() with synchronize_rcu()
net/decnet: Replace rcu_barrier_bh() with rcu_barrier()
...
There are several locations that compare constants to the beginning of
string variables to determine what commands should be done, then the
constant length is used to index into the string. This is error prone as the
hard coded numbers have to match the size of the constants. Instead, use the
len returned from str_has_prefix() and remove the open coded string length
sizes.
Cc: Joe Perches <joe@perches.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org> (for trace_probe part)
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As str_has_prefix() returns the length on match, we can use that for the
updating of the string pointer instead of recalculating the prefix size.
Cc: Tom Zanussi <zanussi@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
There are several instances of strncmp(str, "const", 123), where 123 is the
strlen of the const string to check if "const" is the prefix of str. But
this can be error prone. Use str_has_prefix() instead.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The tracing histogram code contains a lot of instances of the construct:
strncmp(str, "const", sizeof("const") - 1)
This can be prone to bugs due to typos or bad cut and paste. Use the
str_has_prefix() helper macro instead that removes the need for having two
copies of the constant string.
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
In commit 478409dd68 ("tracing: Add hook to function tracing for other
subsystems to use"), a new function ‘ftrace_exports’ was added. Since
this function can be made static, make it so.
Silence the following warning triggered using W=1:
kernel/trace/trace.c:2451:6: warning: no previous prototype for ‘ftrace_exports’ [-Wmissing-prototypes]
Link: http://lkml.kernel.org/r/20180516193012.25390-1-malat@debian.org
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
trace_seq_printf(..., "%s", ...) can be done with trace_seq_puts()
instead, avoiding printf overhead. In the second instance, the string
we're copying was just created from an snprintf() to a stack buffer, so
we might as well do that printf directly. This naturally leads to moving
the declaration of the str buffer inside the CONFIG_KALLSYMS guard,
which in turn will make gcc inline the function for !CONFIG_KALLSYMS (it
only has a single caller, but the huge stack frame seems to make gcc not
inline it for CONFIG_KALLSYMS).
Link: http://lkml.kernel.org/r/20181029223542.26175-4-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Building with -Wformat-nonliteral, gcc complains
kernel/trace/trace_output.c: In function ‘seq_print_sym’:
kernel/trace/trace_output.c:356:3: warning: format not a string literal, argument types not checked [-Wformat-nonliteral]
trace_seq_printf(s, fmt, name);
But seq_print_sym only has a single caller which passes "%s" as fmt, so
we might as well just use that directly. That also paves the way for
further cleanups that will actually make that format string go away
entirely.
Link: http://lkml.kernel.org/r/20181029223542.26175-3-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
These two functions are nearly identical, so we can avoid some code
duplication by moving the conditional into a common implementation.
Link: http://lkml.kernel.org/r/20181029223542.26175-2-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
All var_refs are now handled uniformly and there's no reason to treat
the synth_refs in a special way now, so remove them and associated
functions.
Link: http://lkml.kernel.org/r/b4d3470526b8f0426dcec125399dad9ad9b8589d.1545161087.git.tom.zanussi@linux.intel.com
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Since every var ref for a trigger has an entry in the var_ref[] array,
use that to destroy the var_refs, instead of piecemeal via the field
expressions.
This allows us to avoid having to keep and treat differently separate
lists for the action-related references, which future patches will
remove.
Link: http://lkml.kernel.org/r/fad1a164f0e257c158e70d6eadbf6c586e04b2a2.1545161087.git.tom.zanussi@linux.intel.com
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Have create_var_ref() manage the hist trigger's var_ref list, rather
than having similar code doing it in multiple places. This cleans up
the code and makes sure var_refs are always accounted properly.
Also, document the var_ref-related functions to make what their
purpose clearer.
Link: http://lkml.kernel.org/r/05ddae93ff514e66fc03897d6665231892939913.1545161087.git.tom.zanussi@linux.intel.com
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Since all the variable reference hist_fields are collected into
hist_data->var_refs[] array, there's no need to go through all the
fields looking for them, or in separate arrays like synth_var_refs[],
which will be going away soon anyway.
This also allows us to get rid of some unnecessary code and functions
currently used for the same purpose.
Link: http://lkml.kernel.org/r/1545246556.4239.7.camel@gmail.com
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
There's no need to use strlen() for static strings when the length is
already known, so update trace_events_hist.c with sizeof() for those
cases.
Link: http://lkml.kernel.org/r/e3e754f2bd18e56eaa8baf79bee619316ebf4cfc.1545161087.git.tom.zanussi@linux.intel.com
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The function ftrace_graph_get_ret_stack() takes a task struct descriptor but
uses current as the task to perform the operations on. In pretty much all
cases the task decriptor is the same as current, so this wasn't an issue.
But there is a case in the ARM architecture that passes in a task that is
not current, and expects a result from that task, and this code breaks it.
Fixes: 51584396cff5 ("arm64: Use ftrace_graph_get_ret_stack() instead of curr_ret_stack")
Reported-by: James Morse <james.morse@arm.com>
Tested-by: James Morse <james.morse@arm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-12-21
The following pull-request contains BPF updates for your *net-next* tree.
There is a merge conflict in test_verifier.c. Result looks as follows:
[...]
},
{
"calls: cross frame pruning",
.insns = {
[...]
.prog_type = BPF_PROG_TYPE_SOCKET_FILTER,
.errstr_unpriv = "function calls to other bpf functions are allowed for root only",
.result_unpriv = REJECT,
.errstr = "!read_ok",
.result = REJECT,
},
{
"jset: functional",
.insns = {
[...]
{
"jset: unknown const compare not taken",
.insns = {
BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
BPF_FUNC_get_prandom_u32),
BPF_JMP_IMM(BPF_JSET, BPF_REG_0, 1, 1),
BPF_LDX_MEM(BPF_B, BPF_REG_8, BPF_REG_9, 0),
BPF_EXIT_INSN(),
},
.prog_type = BPF_PROG_TYPE_SOCKET_FILTER,
.errstr_unpriv = "!read_ok",
.result_unpriv = REJECT,
.errstr = "!read_ok",
.result = REJECT,
},
[...]
{
"jset: range",
.insns = {
[...]
},
.prog_type = BPF_PROG_TYPE_SOCKET_FILTER,
.result_unpriv = ACCEPT,
.result = ACCEPT,
},
The main changes are:
1) Various BTF related improvements in order to get line info
working. Meaning, verifier will now annotate the corresponding
BPF C code to the error log, from Martin and Yonghong.
2) Implement support for raw BPF tracepoints in modules, from Matt.
3) Add several improvements to verifier state logic, namely speeding
up stacksafe check, optimizations for stack state equivalence
test and safety checks for liveness analysis, from Alexei.
4) Teach verifier to make use of BPF_JSET instruction, add several
test cases to kselftests and remove nfp specific JSET optimization
now that verifier has awareness, from Jakub.
5) Improve BPF verifier's slot_type marking logic in order to
allow more stack slot sharing, from Jiong.
6) Add sk_msg->size member for context access and add set of fixes
and improvements to make sock_map with kTLS usable with openssl
based applications, from John.
7) Several cleanups and documentation updates in bpftool as well as
auto-mount of tracefs for "bpftool prog tracelog" command,
from Quentin.
8) Include sub-program tags from now on in bpf_prog_info in order to
have a reliable way for user space to get all tags of the program
e.g. needed for kallsyms correlation, from Song.
9) Add BTF annotations for cgroup_local_storage BPF maps and
implement bpf fs pretty print support, from Roman.
10) Fix bpftool in order to allow for cross-compilation, from Ivan.
11) Update of bpftool license to GPLv2-only + BSD-2-Clause in order
to be compatible with libbfd and allow for Debian packaging,
from Jakub.
12) Remove an obsolete prog->aux sanitation in dump and get rid of
version check for prog load, from Daniel.
13) Fix a memory leak in libbpf's line info handling, from Prashant.
14) Fix cpumap's frame alignment for build_skb() so that skb_shared_info
does not get unaligned, from Jesper.
15) Fix test_progs kselftest to work with older compilers which are less
smart in optimizing (and thus throwing build error), from Stanislav.
16) Cleanup and simplify AF_XDP socket teardown, from Björn.
17) Fix sk lookup in BPF kselftest's test_sock_addr with regards
to netns_id argument, from Andrey.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Distributions build drivers as modules, including network and filesystem
drivers which export numerous tracepoints. This enables
bpf(BPF_RAW_TRACEPOINT_OPEN) to attach to those tracepoints.
Signed-off-by: Matt Mullins <mmullins@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
detector found some allocations that were not freed correctly.
This fixes a couple of leaks in the event trigger code as well as
in adding function trace filters in trace instances.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXBAHphQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qphzAP4mTz45V9gq9vyXCVPPzg8T6lV4ZjJh
bPaumlHGumaJHAD9FipqlhCOCVfv8Qyxv5iWuBpoGKcp37ULb6d+dtM+qg4=
=S1FK
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.20-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"While running various ftrace tests on new development code, the
kmemleak detector found some allocations that were not freed
correctly.
This fixes a couple of leaks in the event trigger code as well as in
adding function trace filters in trace instances"
* tag 'trace-v4.20-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix memory leak of instance function hash filters
tracing: Fix memory leak in set_trigger_filter()
tracing: Fix memory leak in create_filter()
The following commands will cause a memory leak:
# cd /sys/kernel/tracing
# mkdir instances/foo
# echo schedule > instance/foo/set_ftrace_filter
# rmdir instances/foo
The reason is that the hashes that hold the filters to set_ftrace_filter and
set_ftrace_notrace are not freed if they contain any data on the instance
and the instance is removed.
Found by kmemleak detector.
Cc: stable@vger.kernel.org
Fixes: 591dffdade ("ftrace: Allow for function tracing instance to filter functions")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When create_event_filter() fails in set_trigger_filter(), the filter may
still be allocated and needs to be freed. The caller expects the
data->filter to be updated with the new filter, even if the new filter
failed (we could add an error message by setting set_str parameter of
create_event_filter(), but that's another update).
But because the error would just exit, filter was left hanging and
nothing could free it.
Found by kmemleak detector.
Cc: stable@vger.kernel.org
Fixes: bac5fb97a1 ("tracing: Add and use generic set_trigger_filter() implementation")
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The create_filter() calls create_filter_start() which allocates a
"parse_error" descriptor, but fails to call create_filter_finish() that
frees it.
The op_stack and inverts in predicate_parse() were also not freed.
Found by kmemleak detector.
Cc: stable@vger.kernel.org
Fixes: 80765597bc ("tracing: Rewrite filter logic to be simpler and faster")
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The ret_stack should not be accessed directly via the curr_ret_stack
variable on the task_struct. This is because the ret_stack is going to be
converted into a series of longs and not an array of ret_stack structures.
The way that a ret_stack should be retrieved is via the
ftrace_graph_get_ret_stack structure, but it needs to be documented on how
to use it.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The function ftrace_replace_code() is the ftrace engine that does the
work to modify all the nops into the calls to the function callback in
all the functions being traced.
The generic version which is normally called from stop machine, but an
architecture can implement a non stop machine version and still use the
generic ftrace_replace_code(). When an architecture does this,
ftrace_replace_code() may be called from a schedulable context, where
it can allow the code to be preemptible, and schedule out.
In order to allow an architecture to make ftrace_replace_code()
schedulable, a new command flag is added called:
FTRACE_MAY_SLEEP
Which can be or'd to the command that is passed to
ftrace_modify_all_code() that calls ftrace_replace_code() and will have
it call cond_resched() in the loop that modifies the nops into the
calls to the ftrace trampolines.
Link: http://lkml.kernel.org/r/20181204192903.8193-1-anders.roxell@linaro.org
Link: http://lkml.kernel.org/r/20181205183303.828422192@goodmis.org
Reported-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add a generic method to remove event from dynamic event
list. This is same as other system under ftrace. You
just need to pass the event name with '!', e.g.
# echo p:new_grp/new_event _do_fork > dynamic_events
This creates an event, and
# echo '!p:new_grp/new_event _do_fork' > dynamic_events
Or,
# echo '!p:new_grp/new_event' > dynamic_events
will remove new_grp/new_event event.
Note that this doesn't check the event prefix (e.g. "p:")
strictly, because the "group/event" name must be unique.
Link: http://lkml.kernel.org/r/154140869774.17322.8887303560398645347.stgit@devbox
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The trace_add/remove_event_call_nolock() functions were added to allow
the tace_add/remove_event_call() code be called when the event_mutex
lock was already taken. Now that all callers are done within the
event_mutex, there's no reason to have two different interfaces.
Remove the current wrapper trace_add/remove_event_call()s and rename the
_nolock versions back to the original names.
Link: http://lkml.kernel.org/r/154140866955.17322.2081425494660638846.stgit@devbox
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Rmove unneeded synth_event_mutex. This mutex protects the reference
count in synth_event, however, those operational points are already
protected by event_mutex.
1. In __create_synth_event() and create_or_delete_synth_event(),
those synth_event_mutex clearly obtained right after event_mutex.
2. event_hist_trigger_func() is trigger_hist_cmd.func() which is
called by trigger_process_regex(), which is a part of
event_trigger_regex_write() and this function takes event_mutex.
3. hist_unreg_all() is trigger_hist_cmd.unreg_all() which is called
by event_trigger_regex_open() and it takes event_mutex.
4. onmatch_destroy() and onmatch_create() have long call tree,
but both are finally invoked from event_trigger_regex_write()
and event_trace_del_tracer(), former takes event_mutex, and latter
ensures called under event_mutex locked.
Finally, I ensured there is no resource conflict. For safety,
I added lockdep_assert_held(&event_mutex) for each function.
Link: http://lkml.kernel.org/r/154140864134.17322.4796059721306031894.stgit@devbox
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Use dyn_event framework for synthetic events. This shows
synthetic events on "tracing/dynamic_events" file in addition
to tracing/synthetic_events interface.
User can also define new events via tracing/dynamic_events
with "s:" prefix. So, the new syntax is below;
s:[synthetic/]EVENT_NAME TYPE ARG; [TYPE ARG;]...
To remove events via tracing/dynamic_events, you can use
"-:" prefix as same as other events.
Link: http://lkml.kernel.org/r/154140861301.17322.15454611233735614508.stgit@devbox
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Use dyn_event framework for uprobe events. This shows
uprobe events on "dynamic_events" file.
User can also define new uprobe events via dynamic_events.
Link: http://lkml.kernel.org/r/154140858481.17322.9091293846515154065.stgit@devbox
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Use dyn_event framework for kprobe events. This shows
kprobe events on "tracing/dynamic_events" file.
User can also define new events via tracing/dynamic_events.
Link: http://lkml.kernel.org/r/154140855646.17322.6619219995865980392.stgit@devbox
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add unified dynamic event framework for ftrace kprobes, uprobes
and synthetic events. Those dynamic events can be co-exist on
same file because those syntax doesn't overlap.
This introduces a framework part which provides a unified tracefs
interface and operations.
Link: http://lkml.kernel.org/r/154140852824.17322.12250362185969352095.stgit@devbox
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Integrate similar argument parsers for kprobes and uprobes events
into traceprobe_parse_probe_arg().
Link: http://lkml.kernel.org/r/154140850016.17322.9836787731210512176.stgit@devbox
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Since the event_mutex and synth_event_mutex ordering issue
is gone, we can skip existing event check when adding or
deleting events, and some redundant code in error path.
This changes release_all_synth_events() to abort the process
when it hits any error and returns the error code. It succeeds
only if it has no error.
Link: http://lkml.kernel.org/r/154140847194.17322.17960275728005067803.stgit@devbox
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
synthetic event is using synth_event_mutex for protecting
synth_event_list, and event_trigger_write() path acquires
locks as below order.
event_trigger_write(event_mutex)
->trigger_process_regex(trigger_cmd_mutex)
->event_hist_trigger_func(synth_event_mutex)
On the other hand, synthetic event creation and deletion paths
call trace_add_event_call() and trace_remove_event_call()
which acquires event_mutex. In that case, if we keep the
synth_event_mutex locked while registering/unregistering synthetic
events, its dependency will be inversed.
To avoid this issue, current synthetic event is using a 2 phase
process to create/delete events. For example, it searches existing
events under synth_event_mutex to check for event-name conflicts, and
unlocks synth_event_mutex, then registers a new event under event_mutex
locked. Finally, it locks synth_event_mutex and tries to add the
new event to the list. But it can introduce complexity and a chance
for name conflicts.
To solve this simpler, this introduces trace_add_event_call_nolock()
and trace_remove_event_call_nolock() which don't acquire
event_mutex inside. synthetic event can lock event_mutex before
synth_event_mutex to solve the lock dependency issue simpler.
Link: http://lkml.kernel.org/r/154140844377.17322.13781091165954002713.stgit@devbox
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add a busy check loop in cleanup_all_probes() before
trying to remove all events in uprobe_events, the same way
that kprobe_events does.
Without this change, writing null to uprobe_events will
try to remove events but if one of them is enabled, it will
stop there leaving some events cleared and others not clceared.
With this change, writing null to uprobe_events makes
sure all events are not enabled before removing events.
So, it clears all events, or returns an error (-EBUSY)
with keeping all events.
Link: http://lkml.kernel.org/r/154140841557.17322.12653952888762532401.stgit@devbox
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
After running several tests, it appears that having the reader wait till
half the buffer is full before starting to read (and causing its own events
to fill up the ring buffer constantly), works well. It keeps trace-cmd (the
main user of this interface) from dominating the traces it records.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add a "buffer_percentage" file, that allows users to specify how much of the
buffer (percentage of pages) need to be filled before waking up a task
blocked on a per cpu trace_pipe_raw file.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Instead of just waiting for a page to be full before waking up a pending
reader, allow the reader to pass in a "percentage" of pages that have
content before waking up a reader. This should help keep the process of
reading the events not cause wake ups that constantly cause reading of the
buffer.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Dan Carpenter reviewed the trace_stack.c code and figured he found an off by
one bug.
"From reviewing the code, it seems possible for
stack_trace_max.nr_entries to be set to .max_entries and in that case we
would be reading one element beyond the end of the stack_dump_trace[]
array. If it's not set to .max_entries then the bug doesn't affect
runtime."
Although it looks to be the case, it is not. Because we have:
static unsigned long stack_dump_trace[STACK_TRACE_ENTRIES+1] =
{ [0 ... (STACK_TRACE_ENTRIES)] = ULONG_MAX };
struct stack_trace stack_trace_max = {
.max_entries = STACK_TRACE_ENTRIES - 1,
.entries = &stack_dump_trace[0],
};
And:
stack_trace_max.nr_entries = x;
for (; x < i; x++)
stack_dump_trace[x] = ULONG_MAX;
Even if nr_entries equals max_entries, indexing with it into the
stack_dump_trace[] array will not overflow the array. But if it is the case,
the second part of the conditional that tests stack_dump_trace[nr_entries]
to ULONG_MAX will always be true.
By applying Dan's patch, it removes the subtle aspect of it and makes the if
conditional slightly more efficient.
Link: http://lkml.kernel.org/r/20180620110758.crunhd5bfep7zuiz@kili.mountain
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The ret_stack processing is going to change, and that is going
to break anything that is accessing the ret_stack directly. One user is the
function graph profiler. By using the ftrace_graph_get_ret_stack() helper
function, the profiler can access the ret_stack entry without relying on the
implementation details of the stack itself.
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Move the function function_graph_ret_addr() to fgraph.c, as the management
of the curr_ret_stack is going to change, and all the accesses to ret_stack
needs to be done in fgraph.c.
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Currently the registering of function graph is to pass in a entry and return
function. We need to have a way to associate those functions together where
the entry can determine to run the return hook. Having a structure that
contains both functions will facilitate the process of converting the code
to be able to do such.
This is similar to the way function hooks are enabled (it passes in
ftrace_ops). Instead of passing in the functions to use, a single structure
is passed in to the registering function.
The unregister function is now passed in the fgraph_ops handle. When we
allow more than one callback to the function graph hooks, this will let the
system know which one to remove.
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Rearrange the functions in trace_sched_wakeup.c so that there are fewer
#ifdef CONFIG_FUNCTION_TRACER and #ifdef CONFIG_FUNCTION_GRAPH_TRACER,
instead of having the #ifdefs spread all over.
No functional change is made.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
To make the function graph infrastructure more managable, the code needs to
be in its own file (fgraph.c). Move the code that is specific for managing
the function graph infrastructure out of ftrace.c and into fgraph.c
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When the function profiler is not configured, the "graph_time" option is
meaningless, as the function profiler is the only thing that makes use of
it. Do not expose it if the profiler is not configured.
Link: http://lkml.kernel.org/r/20181123061133.GA195223@google.com
Reported-by: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
In order to move function graph infrastructure into its own file (fgraph.h)
it needs to access various functions and variables in ftrace.c that are
currently static. Create a new file called ftrace-internal.h that holds the
function prototypes and the extern declarations of the variables needed by
fgraph.c as well, and make them global in ftrace.c such that they can be
used outside that file.
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The curr_ret_stack is no longer set to a negative value when a function is
not to be traced by the function graph tracer. Remove the usage of
FTRACE_NOTRACE_DEPTH, as it is no longer needed.
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Prior patches ensured that any bio that interacts with a request_queue
is properly associated with a blkg. This makes bio->bi_css unnecessary
as blkg maintains a reference to blkcg already.
This removes the bio field bi_css and transfers corresponding uses to
access via bi_blkg.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull RCU changes from Paul E. McKenney:
- Convert RCU's BUG_ON() and similar calls to WARN_ON() and similar.
- Replace calls of RCU-bh and RCU-sched update-side functions
to their vanilla RCU counterparts. This series is a step
towards complete removal of the RCU-bh and RCU-sched update-side
functions.
( Note that some of these conversions are going upstream via their
respective maintainers. )
- Documentation updates, including a number of flavor-consolidation
updates from Joel Fernandes.
- Miscellaneous fixes.
- Automate generation of the initrd filesystem used for
rcutorture testing.
- Convert spin_is_locked() assertions to instead use lockdep.
( Note that some of these conversions are going upstream via their
respective maintainers. )
- SRCU updates, especially including a fix from Dennis Krein
for a bag-on-head-class bug.
- RCU torture-test updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- Change idx variable in DO_TRACE macro to __idx to avoid name conflicts.
A kvm event had "idx" as a parameter and it confused the macro.
- Fix a race where interrupts would be traced when set_graph_function was set.
The previous patch set increased a race window that tricked the function graph
tracer to think it should trace interrupts when it really should not have.
The bug has been there before, but was seldom hit. Only the last patch series
made it more common.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXACrFhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qgUuAP9zZ0+PjDIXrkZATogEsMJ1OZKy5AiK
mwT7S85/ouOeCQEAi5JUcSfwB0caq2nYB1GKOKNfDH0ffeVR4wNykcYjngM=
=gjwC
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull more tracing fixes from Steven Rostedt:
"Two more fixes:
- Change idx variable in DO_TRACE macro to __idx to avoid name
conflicts. A kvm event had "idx" as a parameter and it confused the
macro.
- Fix a race where interrupts would be traced when set_graph_function
was set. The previous patch set increased a race window that
tricked the function graph tracer to think it should trace
interrupts when it really should not have.
The bug has been there before, but was seldom hit. Only the last
patch series made it more common"
* tag 'trace-v4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/fgraph: Fix set_graph_function from showing interrupts
tracepoint: Use __idx instead of idx in DO_TRACE macro to make it unique
was introduced by a patch that tried to fix one bug, but by doing so created
another bug. As both bugs corrupt the output (but they do not crash the
kernel), I decided to fix the design such that it could have both bugs
fixed. The original fix, fixed time reporting of the function graph tracer
when doing a max_depth of one. This was code that can test how much the
kernel interferes with userspace. But in doing so, it could corrupt the time
keeping of the function profiler.
The issue is that the curr_ret_stack variable was being used for two
different meanings. One was to keep track of the stack pointer on the
ret_stack (shadow stack used by the function graph tracer), and the other
use case was the graph call depth. Although, the two may be closely
related, where they got updated was the issue that lead to the two different
bugs that required the two use cases to be updated differently.
The big issue with this fix is that it requires changing each architecture.
The good news is, I was able to remove a lot of code that was duplicated
within the architectures and place it into a single location. Then I could
make the fix in one place.
I pushed this code into linux-next to let it settle over a week, and before
doing so, I cross compiled all the affected architectures to make sure that
they built fine.
In the mean time, I also pulled in a patch that fixes the sched_switch
previous tasks state output, that was not actually correct.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW/4NPhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qnWAAQCyUIRLgYImr81eTl52lxNRsULk+aiI
U29kRFWWU0c40AEA1X9sDF0MgOItbRGfZtnHTZEousXRDaDf4Fge2kF7Egg=
=liQ0
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"While rewriting the function graph tracer, I discovered a design flaw
that was introduced by a patch that tried to fix one bug, but by doing
so created another bug.
As both bugs corrupt the output (but they do not crash the kernel), I
decided to fix the design such that it could have both bugs fixed. The
original fix, fixed time reporting of the function graph tracer when
doing a max_depth of one. This was code that can test how much the
kernel interferes with userspace. But in doing so, it could corrupt
the time keeping of the function profiler.
The issue is that the curr_ret_stack variable was being used for two
different meanings. One was to keep track of the stack pointer on the
ret_stack (shadow stack used by the function graph tracer), and the
other use case was the graph call depth. Although, the two may be
closely related, where they got updated was the issue that lead to the
two different bugs that required the two use cases to be updated
differently.
The big issue with this fix is that it requires changing each
architecture. The good news is, I was able to remove a lot of code
that was duplicated within the architectures and place it into a
single location. Then I could make the fix in one place.
I pushed this code into linux-next to let it settle over a week, and
before doing so, I cross compiled all the affected architectures to
make sure that they built fine.
In the mean time, I also pulled in a patch that fixes the sched_switch
previous tasks state output, that was not actually correct"
* tag 'trace-v4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
sched, trace: Fix prev_state output in sched_switch tracepoint
function_graph: Have profiler use curr_ret_stack and not depth
function_graph: Reverse the order of pushing the ret_stack and the callback
function_graph: Move return callback before update of curr_ret_stack
function_graph: Use new curr_ret_depth to manage depth instead of curr_ret_stack
function_graph: Make ftrace_push_return_trace() static
sparc/function_graph: Simplify with function_graph_enter()
sh/function_graph: Simplify with function_graph_enter()
s390/function_graph: Simplify with function_graph_enter()
riscv/function_graph: Simplify with function_graph_enter()
powerpc/function_graph: Simplify with function_graph_enter()
parisc: function_graph: Simplify with function_graph_enter()
nds32: function_graph: Simplify with function_graph_enter()
MIPS: function_graph: Simplify with function_graph_enter()
microblaze: function_graph: Simplify with function_graph_enter()
arm64: function_graph: Simplify with function_graph_enter()
ARM: function_graph: Simplify with function_graph_enter()
x86/function_graph: Simplify with function_graph_enter()
function_graph: Create function_graph_enter() to consolidate architecture code
In order to make the function graph infrastructure more generic, there can
not be code specific for the function_graph tracer in the generic code. This
includes the set_graph_notrace logic, that stops all graph calls when a
function in the set_graph_notrace is hit.
By using the trace_recursion mask, we can use a bit in the current
task_struct to implement the notrace code, and move the logic out of
fgraph.c and into trace_functions_graph.c and keeps it affecting only the
tracer and not all call graph callbacks.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As the function graph infrastructure can be used by thing other than
tracing, moving the code to its own file out of the trace_functions_graph.c
code makes more sense.
The fgraph.c file will only contain the infrastructure required to hook into
functions and their return code.
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Commit 588ca1786f2dd ("function_graph: Use new curr_ret_depth to manage
depth instead of curr_ret_stack") removed a parameter from the call
ftrace_push_return_trace() that made it so that the entire call was under 80
characters, but it did not remove the line break. There's no reason to break
that line up, so make it a single line.
Link: http://lkml.kernel.org/r/20181122100322.GN2131@hirez.programming.kicks-ass.net
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The tracefs file set_graph_function is used to only function graph functions
that are listed in that file (or all functions if the file is empty). The
way this is implemented is that the function graph tracer looks at every
function, and if the current depth is zero and the function matches
something in the file then it will trace that function. When other functions
are called, the depth will be greater than zero (because the original
function will be at depth zero), and all functions will be traced where the
depth is greater than zero.
The issue is that when a function is first entered, and the handler that
checks this logic is called, the depth is set to zero. If an interrupt comes
in and a function in the interrupt handler is traced, its depth will be
greater than zero and it will automatically be traced, even if the original
function was not. But because the logic only looks at depth it may trace
interrupts when it should not be.
The recent design change of the function graph tracer to fix other bugs
caused the depth to be zero while the function graph callback handler is
being called for a longer time, widening the race of this happening. This
bug was actually there for a longer time, but because the race window was so
small it seldom happened. The Fixes tag below is for the commit that widen
the race window, because that commit belongs to a series that will also help
fix the original bug.
Cc: stable@kernel.org
Fixes: 39eb456dac ("function_graph: Use new curr_ret_depth to manage depth instead of curr_ret_stack")
Reported-by: Joe Lawrence <joe.lawrence@redhat.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The profiler uses trace->depth to find its entry on the ret_stack, but the
depth may not match the actual location of where its entry is (if an
interrupt were to preempt the processing of the profiler for another
function, the depth and the curr_ret_stack will be different).
Have it use the curr_ret_stack as the index to find its ret_stack entry
instead of using the depth variable, as that is no longer guaranteed to be
the same.
Cc: stable@kernel.org
Fixes: 03274a3ffb ("tracing/fgraph: Adjust fgraph depth before calling trace return callback")
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The function graph profiler uses the ret_stack to store the "subtime" and
reuse it by nested functions and also on the return. But the current logic
has the profiler callback called before the ret_stack is updated, and it is
just modifying the ret_stack that will later be allocated (it's just lucky
that the "subtime" is not touched when it is allocated).
This could also cause a crash if we are at the end of the ret_stack when
this happens.
By reversing the order of the allocating the ret_stack and then calling the
callbacks attached to a function being traced, the ret_stack entry is no
longer used before it is allocated.
Cc: stable@kernel.org
Fixes: 03274a3ffb ("tracing/fgraph: Adjust fgraph depth before calling trace return callback")
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
In the past, curr_ret_stack had two functions. One was to denote the depth
of the call graph, the other is to keep track of where on the ret_stack the
data is used. Although they may be slightly related, there are two cases
where they need to be used differently.
The one case is that it keeps the ret_stack data from being corrupted by an
interrupt coming in and overwriting the data still in use. The other is just
to know where the depth of the stack currently is.
The function profiler uses the ret_stack to save a "subtime" variable that
is part of the data on the ret_stack. If curr_ret_stack is modified too
early, then this variable can be corrupted.
The "max_depth" option, when set to 1, will record the first functions going
into the kernel. To see all top functions (when dealing with timings), the
depth variable needs to be lowered before calling the return hook. But by
lowering the curr_ret_stack, it makes the data on the ret_stack still being
used by the return hook susceptible to being overwritten.
Now that there's two variables to handle both cases (curr_ret_depth), we can
move them to the locations where they can handle both cases.
Cc: stable@kernel.org
Fixes: 03274a3ffb ("tracing/fgraph: Adjust fgraph depth before calling trace return callback")
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Currently, the depth of the ret_stack is determined by curr_ret_stack index.
The issue is that there's a race between setting of the curr_ret_stack and
calling of the callback attached to the return of the function.
Commit 03274a3ffb ("tracing/fgraph: Adjust fgraph depth before calling
trace return callback") moved the calling of the callback to after the
setting of the curr_ret_stack, even stating that it was safe to do so, when
in fact, it was the reason there was a barrier() there (yes, I should have
commented that barrier()).
Not only does the curr_ret_stack keep track of the current call graph depth,
it also keeps the ret_stack content from being overwritten by new data.
The function profiler, uses the "subtime" variable of ret_stack structure
and by moving the curr_ret_stack, it allows for interrupts to use the same
structure it was using, corrupting the data, and breaking the profiler.
To fix this, there needs to be two variables to handle the call stack depth
and the pointer to where the ret_stack is being used, as they need to change
at two different locations.
Cc: stable@kernel.org
Fixes: 03274a3ffb ("tracing/fgraph: Adjust fgraph depth before calling trace return callback")
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As all architectures now call function_graph_enter() to do the entry work,
no architecture should ever call ftrace_push_return_trace(). Make it static.
This is needed to prepare for a fix of a design bug on how the curr_ret_stack
is used.
Cc: stable@kernel.org
Fixes: 03274a3ffb ("tracing/fgraph: Adjust fgraph depth before calling trace return callback")
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Now that synchronize_rcu() waits for preempt-disable regions of code
as well as RCU read-side critical sections, synchronize_sched() can
be replaced by synchronize_rcu(). Similarly, call_rcu_sched() can be
replaced by call_rcu(). This commit therefore makes these changes.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <linux-kernel@vger.kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Currently all the architectures do basically the same thing in preparing the
function graph tracer on entry to a function. This code can be pulled into a
generic location and then this will allow the function graph tracer to be
fixed, as well as extended.
Create a new function graph helper function_graph_enter() that will call the
hook function (ftrace_graph_entry) and the shadow stack operation
(ftrace_push_return_trace), and remove the need of the architecture code to
manage the shadow stack.
This is needed to prepare for a fix of a design bug on how the curr_ret_stack
is used.
Cc: stable@kernel.org
Fixes: 03274a3ffb ("tracing/fgraph: Adjust fgraph depth before calling trace return callback")
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
A format string consisting of "%p" or "%s" followed by an invalid
specifier (e.g. "%p%\n" or "%s%") could pass the check which
would make format_decode (lib/vsprintf.c) to warn.
Fixes: 9c959c863f ("tracing: Allow BPF programs to call bpf_trace_printk()")
Reported-by: syzbot+1ec5c5ec949c4adaa0c4@syzkaller.appspotmail.com
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Fix strpbrk()'s argument order, it must pass acceptable string
in 2nd argument. Note that this can cause a kernel panic where
it recovers backup character to code->data.
Link: http://lkml.kernel.org/r/154108256792.2604.1816052586385217811.stgit@devbox
Fixes: a6682814f3 ("tracing/kprobes: Allow kprobe-events to record module symbol")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----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=0zM4
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20181102' of git://git.kernel.dk/linux-block
Pull block layer fixes from Jens Axboe:
"The biggest part of this pull request is the revert of the blkcg
cleanup series. It had one fix earlier for a stacked device issue, but
another one was reported. Rather than play whack-a-mole with this,
revert the entire series and try again for the next kernel release.
Apart from that, only small fixes/changes.
Summary:
- Indentation fixup for mtip32xx (Colin Ian King)
- The blkcg cleanup series revert (Dennis Zhou)
- Two NVMe fixes. One fixing a regression in the nvme request
initialization in this merge window, causing nvme-fc to not work.
The other is a suspend/resume p2p resource issue (James, Keith)
- Fix sg discard merge, allowing us to merge in cases where we didn't
before (Jianchao Wang)
- Call rq_qos_exit() after the queue is frozen, preventing a hang
(Ming)
- Fix brd queue setup, fixing an oops if we fail setting up all
devices (Ming)"
* tag 'for-linus-20181102' of git://git.kernel.dk/linux-block:
nvme-pci: fix conflicting p2p resource adds
nvme-fc: fix request private initialization
blkcg: revert blkcg cleanups series
block: brd: associate with queue until adding disk
block: call rq_qos_exit() after queue is frozen
mtip32xx: clean an indentation issue, remove extraneous tabs
block: fix the DISCARD request merge
Move the Dell dcdbas and dell_rbu drivers into platform/drivers/x86 as
they are closely coupled with other drivers in this location.
Improve _init* usage for acerhdf and fix some usage issues with messages
and module parameters.
Simplify asus-wmi by calling ACPI/WMI methods directly, eliminating
workqueue overhead, eliminate double reporting of keyboard backlight.
Fix wake from USB failure on Bay Trail devices (intel_int0002_vgpio).
Notify intel_telemetry users when IPC1 device is not enabled.
Update various drivers with new laptop model IDs.
Update several intel drivers to use SPDX identifers and order headers
alphabetically.
The following is an automated git shortlog grouped by driver:
Add Intel AtomISP2 dummy / power-management driver:
- Add Intel AtomISP2 dummy / power-management driver
lg-laptop:
- Add LG Gram laptop special features driver
HID:
- asus: only support backlight when it's not driven by WMI
MAINTAINERS:
- intel_telemetry: Update maintainers info
- intel_pmc_core: Update MAINTAINERS
- Update maintainer for dcdbas and dell_rbu
- Use my infradead account exclusively for PDx86 work
acerhdf:
- restructure to allow large BIOS table be __initconst
- mark appropriate content with __init prefix
- Add BIOS entry for Gateway LT31 v1.3307
- Remove cut-and-paste trap from instructions
- Enable ability to list supported systems
- clarify modinfo messages for BIOS override
asus-wmi:
- export function for evaluating WMI methods
- Only notify kbd LED hw_change by fn-key pressed
- Simplify the keyboard brightness updating process
firmware:
- dcdbas: include linux/io.h
- dcdbas: Move dcdbas to drivers/platform/x86
- dell_rbu: Move dell_rbu to drivers/platform/x86
- dcdbas: Add support for WSMT ACPI table
- dell_rbu: Make payload memory uncachable
ideapad-laptop:
- Add Y530-15ICH to no_hw_rfkill
- Use __func__ instead of read_ec_cmd in pr_err
intel-hid:
- Convert to use SPDX identifier
intel-ips:
- Convert to use SPDX identifier
intel-rst:
- Convert to use SPDX identifier
- Sort headers alphabetically
intel-smartconnect:
- Convert to use SPDX identifier
- Sort headers alphabetically
intel-wmi-thunderbolt:
- Add dynamic debugging
- Convert to use SPDX identifier
intel_bxtwc_tmu:
- Convert to use SPDX identifier
intel_cht_int33fe:
- Convert to use SPDX identifier
intel_chtdc_ti_pwrbtn:
- Add SPDX identifier
intel_int0002_vgpio:
- Convert to use SPDX identifier
- Implement irq_set_wake
- Enable the driver on Bay Trail platforms
intel_menlow:
- Convert to use SPDX identifier
- Sort headers alphabetically
intel_mid_powerbtn:
- Convert to use SPDX identifier
- Remove unnecessary init.h inclusion
- Get rid of custom ICPU() macro
intel_mid_thermal:
- Convert to use SPDX identifier
- Sort headers alphabetically
intel_oaktrail:
- Convert to use SPDX identifier
- Sort headers alphabetically
intel_pmc:
- Convert to use SPDX identifier
- Sort headers alphabetically
intel_punit_ipc:
- Convert to use SPDX identifier
- Sort headers alphabetically
intel_scu_ipc:
- Convert to use SPDX identifier
- Sort headers alphabetically
intel_telemetry:
- Get rid of custom macro
- report debugfs failure
- Convert to use SPDX identifier
intel_turbo_max_3:
- Convert to use SPDX identifier
- Sort headers alphabetically
mlx-platform:
- Properly use mlxplat_mlxcpld_msn201x_items
touchscreen_dmi:
- Add min-x and min-y settings for various models
- Add info for the Onda V80 Plus v3 tablet
- Add info for the Trekstor Primetab T13B tablet
- Add info for the Trekstor Primebook C11 convertible
tracing:
- Trivia spelling fix containerof() -> container_of()
wmi:
- declare device_type structure as constant
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJb2mDCAAoJEKbMaAwKp364KdkH/Rar8cenw7uFeVzT5o4fGzTn
0Oo1Pnwh+hPgmQwmf8O/mHsa/1Zb9nX4nNLU/ysDUjAAZ9wZLoB57HlImQquPA74
c8lXTz5MVF140WB1f1Ck5PmeonJR2Xve7HTYCoBmGo71jOxHxCgJbp1Giiho0Imd
3NXzzahEnAiy/L5PhqqYTmIfTeAHQ2Fo7GkHCjMnS20FP2fBtvPrc7db03F+FZ4y
QTfbT0oR42NdeW21AbCRGY3P47axB3xDJX4LOYrb4uo4CIzd1yatlHk407NRRyv8
pab6aeJR23FouA/tcvv+T36D3vqRw78e6BWdoyowWOd7CUOgjtSC3lKGzfT6hSY=
=0BDZ
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.20-1' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Darren Hart:
- Move the Dell dcdbas and dell_rbu drivers into platform/drivers/x86
as they are closely coupled with other drivers in this location.
- Improve _init* usage for acerhdf and fix some usage issues with
messages and module parameters.
- Simplify asus-wmi by calling ACPI/WMI methods directly, eliminating
workqueue overhead, eliminate double reporting of keyboard backlight.
- Fix wake from USB failure on Bay Trail devices (intel_int0002_vgpio).
- Notify intel_telemetry users when IPC1 device is not enabled.
- Update various drivers with new laptop model IDs.
- Update several intel drivers to use SPDX identifers and order headers
alphabetically.
* tag 'platform-drivers-x86-v4.20-1' of git://git.infradead.org/linux-platform-drivers-x86: (64 commits)
HID: asus: only support backlight when it's not driven by WMI
platform/x86: asus-wmi: export function for evaluating WMI methods
platform/x86: asus-wmi: Only notify kbd LED hw_change by fn-key pressed
platform/x86: wmi: declare device_type structure as constant
platform/x86: ideapad: Add Y530-15ICH to no_hw_rfkill
platform/x86: Add Intel AtomISP2 dummy / power-management driver
platform/x86: touchscreen_dmi: Add min-x and min-y settings for various models
platform/x86: touchscreen_dmi: Add info for the Onda V80 Plus v3 tablet
platform/x86: touchscreen_dmi: Add info for the Trekstor Primetab T13B tablet
platform/x86: intel_telemetry: Get rid of custom macro
platform/x86: intel_telemetry: report debugfs failure
MAINTAINERS: intel_telemetry: Update maintainers info
platform/x86: Add LG Gram laptop special features driver
platform/x86: asus-wmi: Simplify the keyboard brightness updating process
platform/x86: touchscreen_dmi: Add info for the Trekstor Primebook C11 convertible
platform/x86: mlx-platform: Properly use mlxplat_mlxcpld_msn201x_items
MAINTAINERS: intel_pmc_core: Update MAINTAINERS
firmware: dcdbas: include linux/io.h
platform/x86: intel-wmi-thunderbolt: Add dynamic debugging
platform/x86: intel-wmi-thunderbolt: Convert to use SPDX identifier
...
Back in January I posted patches to create function based events. These were
the events that you suggested I make to allow developers to easily create
events in code where no trace event exists. After posting those changes for
review, it was suggested that we implement this instead with kprobes.
The problem with kprobes is that the interface is too complex and needs to
be simplified. Masami Hiramatsu posted patches in March and I've been
playing with them a bit. There's been a bit of clean up in the kprobe code
that was inspired by the function based event patches, and a couple of
enhancements to the kprobe event interface.
- If the arch supports it (we added support for x86), you can place a
kprobe event at the start of a function and use $arg1, $arg2, etc
to reference the arguments of a function. (Before you needed to know
what register or where on the stack the argument was).
- The second is a way to see array of events. For example, if you reference
a mac address, you can add:
echo 'p:mac ip_rcv perm_addr=+574($arg2):x8[6]' > kprobe_events
And this will produce:
mac: (ip_rcv+0x0/0x140) perm_addr={0x52,0x54,0x0,0xc0,0x76,0xec}
Other changes include
- Exporting trace_dump_stack to modules
- Have the stack tracer trace the entire stack (stop trying to remove
tracing itself, as we keep removing too much).
- Added support for SDT in uprobes
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW9hdjxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qmtbAP9GS/o2WSvsYLSIw4+mF94eCL06lUxp
rRrktkEofm/PagEAl2JNmvHrAJN+LIrajqXTbwlZ7Ckk1rZhCW41Am7qnQs=
=sTUM
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"The biggest change here is the updates to kprobes
Back in January I posted patches to create function based events.
These were the events that you suggested I make to allow developers to
easily create events in code where no trace event exists. After
posting those changes for review, it was suggested that we implement
this instead with kprobes.
The problem with kprobes is that the interface is too complex and
needs to be simplified. Masami Hiramatsu posted patches in March and
I've been playing with them a bit. There's been a bit of clean up in
the kprobe code that was inspired by the function based event patches,
and a couple of enhancements to the kprobe event interface.
- If the arch supports it (we added support for x86), you can place a
kprobe event at the start of a function and use $arg1, $arg2, etc
to reference the arguments of a function. (Before you needed to
know what register or where on the stack the argument was).
- The second is a way to see array of events. For example, if you
reference a mac address, you can add:
echo 'p:mac ip_rcv perm_addr=+574($arg2):x8[6]' > kprobe_events
And this will produce:
mac: (ip_rcv+0x0/0x140) perm_addr={0x52,0x54,0x0,0xc0,0x76,0xec}
Other changes include
- Exporting trace_dump_stack to modules
- Have the stack tracer trace the entire stack (stop trying to remove
tracing itself, as we keep removing too much).
- Added support for SDT in uprobes"
[ SDT - "Statically Defined Tracing" are userspace markers for tracing.
Let's not use random TLA's in explanations unless they are fairly
well-established as generic (at least for kernel people) - Linus ]
* tag 'trace-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (24 commits)
tracing: Have stack tracer trace full stack
tracing: Export trace_dump_stack to modules
tracing: probeevent: Fix uninitialized used of offset in parse args
tracing/kprobes: Allow kprobe-events to record module symbol
tracing/kprobes: Check the probe on unloaded module correctly
tracing/uprobes: Fix to return -EFAULT if copy_from_user failed
tracing: probeevent: Add $argN for accessing function args
x86: ptrace: Add function argument access API
tracing: probeevent: Add array type support
tracing: probeevent: Add symbol type
tracing: probeevent: Unify fetch_insn processing common part
tracing: probeevent: Append traceprobe_ for exported function
tracing: probeevent: Return consumed bytes of dynamic area
tracing: probeevent: Unify fetch type tables
tracing: probeevent: Introduce new argument fetching code
tracing: probeevent: Remove NOKPROBE_SYMBOL from print functions
tracing: probeevent: Cleanup argument field definition
tracing: probeevent: Cleanup print argument functions
trace_uprobe: support reference counter in fd-based uprobe
perf probe: Support SDT markers having reference counter (semaphore)
...
error return value, and the other is for the self tests.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW9hYsBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qiWPAQCARhYpeiWNHYGAirpI1vxaNHzutZvP
j6eaqRXu0JDfsQD7Bb19KxSHUEaPSpZIo68N5OJkoTv9UxD2KYuRysu4VQ8=
=y1Gc
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.19-rc8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Masami had a couple more fixes to the synthetic events. One was a
proper error return value, and the other is for the self tests"
* tag 'trace-v4.19-rc8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
selftests/ftrace: Fix synthetic event test to delete event correctly
tracing: Return -ENOENT if there is no target synthetic event
Return -ENOENT error if there is no target synthetic event.
This notices an operation failure to user as below;
# echo 'wakeup_latency u64 lat; pid_t pid;' > synthetic_events
# echo '!wakeup' >> synthetic_events
sh: write error: No such file or directory
Link: http://lkml.kernel.org/r/154013449986.25576.9487131386597290172.stgit@devbox
Acked-by: Tom Zanussi <zanussi@linux.intel.com>
Tested-by: Tom Zanussi <zanussi@linux.intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Rajvi Jingar <rajvi.jingar@intel.com>
Cc: stable@vger.kernel.org
Fixes: 4b147936fa ('tracing: Add support for 'synthetic' events')
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The stack tracer traces every function call checking the current stack (in
non interrupt context), looking for the deepest stack, and saving it when it
finds a new max depth. The problem is that it calls save_stack_trace(), and
with the new ORC unwinder, it can skip too much. As it looks at the ip of
the function call in the backtrace to find where it should start, it doesn't
need to skip anything.
The stack trace selftest would fail when the kernel was complied with the
ORC UNDWINDER enabled. Without skipping functions when doing the stack
trace, it now passes again.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----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=LRTT
-----END PGP SIGNATURE-----
Merge tag 'for-4.20/block-20181021' of git://git.kernel.dk/linux-block
Pull block layer updates from Jens Axboe:
"This is the main pull request for block changes for 4.20. This
contains:
- Series enabling runtime PM for blk-mq (Bart).
- Two pull requests from Christoph for NVMe, with items such as;
- Better AEN tracking
- Multipath improvements
- RDMA fixes
- Rework of FC for target removal
- Fixes for issues identified by static checkers
- Fabric cleanups, as prep for TCP transport
- Various cleanups and bug fixes
- Block merging cleanups (Christoph)
- Conversion of drivers to generic DMA mapping API (Christoph)
- Series fixing ref count issues with blkcg (Dennis)
- Series improving BFQ heuristics (Paolo, et al)
- Series improving heuristics for the Kyber IO scheduler (Omar)
- Removal of dangerous bio_rewind_iter() API (Ming)
- Apply single queue IPI redirection logic to blk-mq (Ming)
- Set of fixes and improvements for bcache (Coly et al)
- Series closing a hotplug race with sysfs group attributes (Hannes)
- Set of patches for lightnvm:
- pblk trace support (Hans)
- SPDX license header update (Javier)
- Tons of refactoring patches to cleanly abstract the 1.2 and 2.0
specs behind a common core interface. (Javier, Matias)
- Enable pblk to use a common interface to retrieve chunk metadata
(Matias)
- Bug fixes (Various)
- Set of fixes and updates to the blk IO latency target (Josef)
- blk-mq queue number updates fixes (Jianchao)
- Convert a bunch of drivers from the old legacy IO interface to
blk-mq. This will conclude with the removal of the legacy IO
interface itself in 4.21, with the rest of the drivers (me, Omar)
- Removal of the DAC960 driver. The SCSI tree will introduce two
replacement drivers for this (Hannes)"
* tag 'for-4.20/block-20181021' of git://git.kernel.dk/linux-block: (204 commits)
block: setup bounce bio_sets properly
blkcg: reassociate bios when make_request() is called recursively
blkcg: fix edge case for blk_get_rl() under memory pressure
nvme-fabrics: move controller options matching to fabrics
nvme-rdma: always have a valid trsvcid
mtip32xx: fully switch to the generic DMA API
rsxx: switch to the generic DMA API
umem: switch to the generic DMA API
sx8: switch to the generic DMA API
sx8: remove dead IF_64BIT_DMA_IS_POSSIBLE code
skd: switch to the generic DMA API
ubd: remove use of blk_rq_map_sg
nvme-pci: remove duplicate check
drivers/block: Remove DAC960 driver
nvme-pci: fix hot removal during error handling
nvmet-fcloop: suppress a compiler warning
nvme-core: make implicit seed truncation explicit
nvmet-fc: fix kernel-doc headers
nvme-fc: rework the request initialization code
nvme-fc: introduce struct nvme_fcp_op_w_sgl
...
Fix synthetic event to allow independent semicolon at end.
The synthetic_events interface accepts a semicolon after the
last word if there is no space.
# echo "myevent u64 var;" >> synthetic_events
But if there is a space, it returns an error.
# echo "myevent u64 var ;" > synthetic_events
sh: write error: Invalid argument
This behavior is difficult for users to understand. Let's
allow the last independent semicolon too.
Link: http://lkml.kernel.org/r/153986835420.18251.2191216690677025744.stgit@devbox
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: stable@vger.kernel.org
Fixes: commit 4b147936fa ("tracing: Add support for 'synthetic' events")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix synthetic event to accept unsigned modifier for its field type
correctly.
Currently, synthetic_events interface returns error for "unsigned"
modifiers as below;
# echo "myevent unsigned long var" >> synthetic_events
sh: write error: Invalid argument
This is because argv_split() breaks "unsigned long" into "unsigned"
and "long", but parse_synth_field() doesn't expected it.
With this fix, synthetic_events can handle the "unsigned long"
correctly like as below;
# echo "myevent unsigned long var" >> synthetic_events
# cat synthetic_events
myevent unsigned long var
Link: http://lkml.kernel.org/r/153986832571.18251.8448135724590496531.stgit@devbox
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: stable@vger.kernel.org
Fixes: commit 4b147936fa ("tracing: Add support for 'synthetic' events")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The preemptirq_delay_test module is used for the ftrace selftest code that
tests the latency tracers. The problem is that it uses ktime for the delay
loop, and then checks the tracer to see if the delay loop is caught, but the
tracer uses trace_clock_local() which uses various different other clocks to
measure the latency. As ktime uses the clock cycles, and the code then
converts that to nanoseconds, it causes rounding errors, and the preemptirq
latency tests are failing due to being off by 1 (it expects to see a delay
of 500000 us, but the delay is only 499999 us). This is happening due to a
rounding error in the ktime (which is totally legit). The purpose of the
test is to see if it can catch the delay, not to test the accuracy between
trace_clock_local() and ktime_get(). Best to use apples to apples, and have
the delay loop use the same clock as the latency tracer does.
Cc: stable@vger.kernel.org
Fixes: f96e8577da ("lib: Add module for testing preemptoff/irqsoff latency tracers")
Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Dan's smatch utility found an uninitialized use of offset in a path in
parse_probe_args(). Unless an offset is specifically specified for commands
that allow them, it should default to zero.
Link: http://lkml.kernel.org/r/20181012134246.5doqaobxunlqqs53@mwanda
Fixes: 533059281e ("tracing: probeevent: Introduce new argument fetching code")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> (smatch)
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Allow kprobe-events to record module symbols.
Since data symbols in a non-loaded module doesn't exist, it fails to
define such symbol as an argument of kprobe-event. But if the kprobe
event is defined on that module, we can defer to resolve the symbol
address.
Note that if given symbol is not found, the event is kept unavailable.
User can enable it but the event is not recorded.
Link: http://lkml.kernel.org/r/153547312336.26502.11432902826345374463.stgit@devbox
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Current kprobe event doesn't checks correctly whether the
given event is on unloaded module or not. It just checks
the event has ":" in the name.
That is not enough because if we define a probe on non-exist
symbol on loaded module, it allows to define that (with
warning message)
To ensure it correctly, this searches the module name on
loaded module list and only if there is not, it allows to
define it. (this event will be available when the target
module is loaded)
Link: http://lkml.kernel.org/r/153547309528.26502.8300278470528281328.stgit@devbox
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix probe_mem_read() to return -EFAULT if copy_from_user()
failed. The copy_from_user() returns remaining bytes
when it failed, but probe_mem_read() caller expects it
returns error code like as probe_kernel_read().
Link: http://lkml.kernel.org/r/153547306719.26502.8353484532699160223.stgit@devbox
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add $argN special fetch variable for accessing function
arguments. This allows user to trace the Nth argument easily
at the function entry.
Note that this returns most probably assignment of registers
and stacks. In some case, it may not work well. If you need
to access correct registers or stacks you should use perf-probe.
Link: http://lkml.kernel.org/r/152465888632.26224.3412465701570253696.stgit@devbox
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add array type support for probe events.
This allows user to get arraied types from memory address.
The array type syntax is
TYPE[N]
Where TYPE is one of types (u8/16/32/64,s8/16/32/64,
x8/16/32/64, symbol, string) and N is a fixed value less
than 64.
The string array type is a bit different from other types. For
other base types, <base-type>[1] is equal to <base-type>
(e.g. +0(%di):x32[1] is same as +0(%di):x32.) But string[1] is not
equal to string. The string type itself represents "char array",
but string array type represents "char * array". So, for example,
+0(%di):string[1] is equal to +0(+0(%di)):string.
Link: http://lkml.kernel.org/r/152465891533.26224.6150658225601339931.stgit@devbox
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add "symbol" type to probeevent, which is an alias of u32 or u64
(depends on BITS_PER_LONG). This shows the result value in
symbol+offset style. This type is only available with kprobe
events.
Link: http://lkml.kernel.org/r/152465882860.26224.14779072294412467338.stgit@devbox
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Unify the fetch_insn bottom process (from stage 2: dereference
indirect data) from kprobe and uprobe events, since those are
mostly same.
Link: http://lkml.kernel.org/r/152465879965.26224.8547240824606804815.stgit@devbox
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cleanup string fetching routine so that returns the consumed
bytes of dynamic area and store the string information as
data_loc format instead of data_rloc.
This simplifies the fetcharg loop.
Link: http://lkml.kernel.org/r/152465874163.26224.12125143907501289031.stgit@devbox
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Unify {k,u}probe_fetch_type_table to probe_fetch_type_table
because the main difference of those type tables (fetcharg
methods) are gone. Now we can consolidate it.
Link: http://lkml.kernel.org/r/152465871274.26224.13999436317830479698.stgit@devbox
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Replace {k,u}probe event argument fetching framework with switch-case based.
Currently that is implemented with structures, macros and chain of
function-pointers, which is more complicated than necessary and may get a
performance penalty by retpoline.
This simplify that with an array of "fetch_insn" (opcode and oprands), and
make process_fetch_insn() just interprets it. No function pointers are used.
Link: http://lkml.kernel.org/r/152465868340.26224.2551120475197839464.stgit@devbox
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Remove unneeded NOKPROBE_SYMBOL from print functions since
the print functions are only used when printing out the
trace data, and not from kprobe handler.
Link: http://lkml.kernel.org/r/152465865422.26224.10111548170594014954.stgit@devbox
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cleanup the print-argument function to decouple it into
print-name and print-value, so that it can support more
flexible expression, like array type.
Link: http://lkml.kernel.org/r/152465859635.26224.13452846788717102315.stgit@devbox
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This patch enables uprobes with reference counter in fd-based uprobe.
Highest 32 bits of perf_event_attr.config is used to stored offset
of the reference count (semaphore).
Format information in /sys/bus/event_source/devices/uprobe/format/ is
updated to reflect this new feature.
Link: http://lkml.kernel.org/r/20181002053636.1896903-1-songliubraving@fb.com
Cc: Oleg Nesterov <oleg@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-and-tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----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=dMl4
-----END PGP SIGNATURE-----
Merge tag 'v4.19-rc6' into for-4.20/block
Merge -rc6 in, for two reasons:
1) Resolve a trivial conflict in the blk-mq-tag.c documentation
2) A few important regression fixes went into upstream directly, so
they aren't in the 4.20 branch.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* tag 'v4.19-rc6': (780 commits)
Linux 4.19-rc6
MAINTAINERS: fix reference to moved drivers/{misc => auxdisplay}/panel.c
cpufreq: qcom-kryo: Fix section annotations
perf/core: Add sanity check to deal with pinned event failure
xen/blkfront: correct purging of persistent grants
Revert "xen/blkfront: When purging persistent grants, keep them in the buffer"
selftests/powerpc: Fix Makefiles for headers_install change
blk-mq: I/O and timer unplugs are inverted in blktrace
dax: Fix deadlock in dax_lock_mapping_entry()
x86/boot: Fix kexec booting failure in the SEV bit detection code
bcache: add separate workqueue for journal_write to avoid deadlock
drm/amd/display: Fix Edid emulation for linux
drm/amd/display: Fix Vega10 lightup on S3 resume
drm/amdgpu: Fix vce work queue was not cancelled when suspend
Revert "drm/panel: Add device_link from panel device to DRM device"
xen/blkfront: When purging persistent grants, keep them in the buffer
clocksource/drivers/timer-atmel-pit: Properly handle error cases
block: fix deadline elevator drain for zoned block devices
ACPI / hotplug / PCI: Don't scan for non-hotplug bridges if slot is not bridge
drm/syncobj: Don't leak fences when WAIT_FOR_SUBMIT is set
...
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is the only location on kernel that has wrong spelling
of the container_of() helper. Fix it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
We assume to have only one reference counter for one uprobe.
Don't allow user to add multiple trace_uprobe entries having
same inode+offset but different reference counter.
Ex,
# echo "p:sdt_tick/loop2 /home/ravi/tick:0x6e4(0x10036)" > uprobe_events
# echo "p:sdt_tick/loop2_1 /home/ravi/tick:0x6e4(0xfffff)" >> uprobe_events
bash: echo: write error: Invalid argument
# dmesg
trace_kprobe: Reference counter offset mismatch.
There is one exception though:
When user is trying to replace the old entry with the new
one, we allow this if the new entry does not conflict with
any other existing entries.
Link: http://lkml.kernel.org/r/20180820044250.11659-4-ravi.bangoria@linux.ibm.com
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Tested-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Userspace Statically Defined Tracepoints[1] are dtrace style markers
inside userspace applications. Applications like PostgreSQL, MySQL,
Pthread, Perl, Python, Java, Ruby, Node.js, libvirt, QEMU, glib etc
have these markers embedded in them. These markers are added by developer
at important places in the code. Each marker source expands to a single
nop instruction in the compiled code but there may be additional
overhead for computing the marker arguments which expands to couple of
instructions. In case the overhead is more, execution of it can be
omitted by runtime if() condition when no one is tracing on the marker:
if (reference_counter > 0) {
Execute marker instructions;
}
Default value of reference counter is 0. Tracer has to increment the
reference counter before tracing on a marker and decrement it when
done with the tracing.
Implement the reference counter logic in core uprobe. User will be
able to use it from trace_uprobe as well as from kernel module. New
trace_uprobe definition with reference counter will now be:
<path>:<offset>[(ref_ctr_offset)]
where ref_ctr_offset is an optional field. For kernel module, new
variant of uprobe_register() has been introduced:
uprobe_register_refctr(inode, offset, ref_ctr_offset, consumer)
No new variant for uprobe_unregister() because it's assumed to have
only one reference counter for one uprobe.
[1] https://sourceware.org/systemtap/wiki/UserSpaceProbeImplementation
Note: 'reference counter' is called as 'semaphore' in original Dtrace
(or Systemtap, bcc and even in ELF) documentation and code. But the
term 'semaphore' is misleading in this context. This is just a counter
used to hold number of tracers tracing on a marker. This is not really
used for any synchronization. So we are calling it a 'reference counter'
in kernel / perf code.
Link: http://lkml.kernel.org/r/20180820044250.11659-2-ravi.bangoria@linux.ibm.com
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
[Only trace_uprobe.c]
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Song Liu <songliubraving@fb.com>
Tested-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
By utilizing a temporary variable, we can avoid adding another call to
strchr(). Instead, save the first call to a temp variable, and then use that
variable as the reference to set the event variable.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Prior patches ensured that all bios are now associated with some blkg.
This now makes bio->bi_css unnecessary as blkg maintains a reference to
the blkcg already.
This patch removes the field bi_css and transfers corresponding uses to
access via bi_blkg.
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When reducing ring buffer size, pages are removed by scheduling a work
item on each CPU for the corresponding CPU ring buffer. After the pages
are removed from ring buffer linked list, the pages are free()d in a
tight loop. The loop does not give up CPU until all pages are removed.
In a worst case behavior, when lot of pages are to be freed, it can
cause system stall.
After the pages are removed from the list, the free() can happen while
the work is rescheduled. Call cond_resched() in the loop to prevent the
system hangup.
Link: http://lkml.kernel.org/r/20180907223129.71994-1-vnagarnaik@google.com
Cc: stable@vger.kernel.org
Fixes: 83f40318da ("ring-buffer: Make removal of ring buffer pages atomic")
Reported-by: Jason Behmer <jbehmer@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
from being traced by kprobes. During my testing, I found that there's places
that we may want to add kprobes to notrace, thus we may end up changing this
code before 4.19 is released. The history behind this change is that we
found that adding kprobes to various notrace functions caused the kernel to
crashed. We took the safe route and decided not to allow kprobes to trace
any notrace function. But because notrace is added to functions that just
cause weird side effects to the function tracer, but are still safe,
preventing kprobes for all notrace functios may be too much of a big hammer.
One such place is __schedule() is marked notrace, to keep function tracer
from doing strange recursive loops when it gets traced with NEED_RESCHED
set. With this change, one can not add kprobes to the scheduler.
Masami also added code to use gcov on ftrace.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW34RpBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qhwzAQDITRob1VjOF8RavMbfBZZuhwHPQROF
XsIFcD+jghFOUgEA1zXX4w+SwOV7S+chpGKMh3DlNKIbYPA+8eiMNFfDsA4=
=u+oq
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Masami found an off by one bug in the code that keeps "notrace"
functions from being traced by kprobes. During my testing, I found
that there's places that we may want to add kprobes to notrace, thus
we may end up changing this code before 4.19 is released.
The history behind this change is that we found that adding kprobes to
various notrace functions caused the kernel to crashed. We took the
safe route and decided not to allow kprobes to trace any notrace
function.
But because notrace is added to functions that just cause weird side
effects to the function tracer, but are still safe, preventing kprobes
for all notrace functios may be too much of a big hammer.
One such place is __schedule() is marked notrace, to keep function
tracer from doing strange recursive loops when it gets traced with
NEED_RESCHED set. With this change, one can not add kprobes to the
scheduler.
Masami also added code to use gcov on ftrace"
* tag 'trace-v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/kprobes: Fix to check notrace function with correct range
tracing: Allow gcov profiling on only ftrace subsystem
-----BEGIN PGP SIGNATURE-----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=FS7e
-----END PGP SIGNATURE-----
Merge tag 'for-4.19/post-20180822' of git://git.kernel.dk/linux-block
Pull more block updates from Jens Axboe:
- Set of bcache fixes and changes (Coly)
- The flush warn fix (me)
- Small series of BFQ fixes (Paolo)
- wbt hang fix (Ming)
- blktrace fix (Steven)
- blk-mq hardware queue count update fix (Jianchao)
- Various little fixes
* tag 'for-4.19/post-20180822' of git://git.kernel.dk/linux-block: (31 commits)
block/DAC960.c: make some arrays static const, shrinks object size
blk-mq: sync the update nr_hw_queues with blk_mq_queue_tag_busy_iter
blk-mq: init hctx sched after update ctx and hctx mapping
block: remove duplicate initialization
tracing/blktrace: Fix to allow setting same value
pktcdvd: fix setting of 'ret' error return for a few cases
block: change return type to bool
block, bfq: return nbytes and not zero from struct cftype .write() method
block, bfq: improve code of bfq_bfqq_charge_time
block, bfq: reduce write overcharge
block, bfq: always update the budget of an entity when needed
block, bfq: readd missing reset of parent-entity service
blk-wbt: fix IO hang in wbt_wait()
block: don't warn for flush on read-only device
bcache: add the missing comments for smp_mb()/smp_wmb()
bcache: remove unnecessary space before ioctl function pointer arguments
bcache: add missing SPDX header
bcache: move open brace at end of function definitions to next line
bcache: add static const prefix to char * array declarations
bcache: fix code comments style
...
Fix within_notrace_func() to check notrace function correctly.
Since the ftrace_location_range(start, end) function checks
the range inclusively (start <= ftrace-loc <= end), the end
address must not include the entry address of next function.
However, within_notrace_func() uses kallsyms_lookup_size_offset()
to get the function size and calculate the end address from
adding the size to the entry address. This means the end address
is the entry address of the next function.
In the result, within_notrace_func() fails to find notrace
function if the next function of the target function is
ftraced.
Let's subtract 1 from the end address so that ftrace_location_range()
can check it correctly.
Link: http://lkml.kernel.org/r/153485669706.16611.17726752296213785504.stgit@devbox
Fixes: commit 45408c4f92 ("tracing: kprobes: Prohibit probing on notrace function")
Reported-by: Michael Rodin <michael@rodin.online>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add GCOV_PROFILE_FTRACE to allow gcov profiling on only files in ftrace
subsystem. This config option will be used for checking kselftest/ftrace
coverage.
Link: http://lkml.kernel.org/r/153483647755.32472.4746349899604275441.stgit@devbox
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
- Restructure of lockdep and latency tracers
This is the biggest change. Joel Fernandes restructured the hooks
from irqs and preemption disabling and enabling. He got rid of
a lot of the preprocessor #ifdef mess that they caused.
He turned both lockdep and the latency tracers to use trace events
inserted in the preempt/irqs disabling paths. But unfortunately,
these started to cause issues in corner cases. Thus, parts of the
code was reverted back to where lockde and the latency tracers
just get called directly (without using the trace events).
But because the original change cleaned up the code very nicely
we kept that, as well as the trace events for preempt and irqs
disabling, but they are limited to not being called in NMIs.
- Have trace events use SRCU for "rcu idle" calls. This was required
for the preempt/irqs off trace events. But it also had to not
allow them to be called in NMI context. Waiting till Paul makes
an NMI safe SRCU API.
- New notrace SRCU API to allow trace events to use SRCU.
- Addition of mcount-nop option support
- SPDX headers replacing GPL templates.
- Various other fixes and clean ups.
- Some fixes are marked for stable, but were not fully tested
before the merge window opened.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW3ruhRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qiM7AP47NhYdSnCFCRUJfrt6PovXmQtuCHt3
c3QMoGGdvzh9YAEAqcSXwh7uLhpHUp1LjMAPkXdZVwNddf4zJQ1zyxQ+EAU=
=vgEr
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Restructure of lockdep and latency tracers
This is the biggest change. Joel Fernandes restructured the hooks
from irqs and preemption disabling and enabling. He got rid of a lot
of the preprocessor #ifdef mess that they caused.
He turned both lockdep and the latency tracers to use trace events
inserted in the preempt/irqs disabling paths. But unfortunately,
these started to cause issues in corner cases. Thus, parts of the
code was reverted back to where lockdep and the latency tracers just
get called directly (without using the trace events). But because the
original change cleaned up the code very nicely we kept that, as well
as the trace events for preempt and irqs disabling, but they are
limited to not being called in NMIs.
- Have trace events use SRCU for "rcu idle" calls. This was required
for the preempt/irqs off trace events. But it also had to not allow
them to be called in NMI context. Waiting till Paul makes an NMI safe
SRCU API.
- New notrace SRCU API to allow trace events to use SRCU.
- Addition of mcount-nop option support
- SPDX headers replacing GPL templates.
- Various other fixes and clean ups.
- Some fixes are marked for stable, but were not fully tested before
the merge window opened.
* tag 'trace-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits)
tracing: Fix SPDX format headers to use C++ style comments
tracing: Add SPDX License format tags to tracing files
tracing: Add SPDX License format to bpf_trace.c
blktrace: Add SPDX License format header
s390/ftrace: Add -mfentry and -mnop-mcount support
tracing: Add -mcount-nop option support
tracing: Avoid calling cc-option -mrecord-mcount for every Makefile
tracing: Handle CC_FLAGS_FTRACE more accurately
Uprobe: Additional argument arch_uprobe to uprobe_write_opcode()
Uprobes: Simplify uprobe_register() body
tracepoints: Free early tracepoints after RCU is initialized
uprobes: Use synchronize_rcu() not synchronize_sched()
tracing: Fix synchronizing to event changes with tracepoint_synchronize_unregister()
ftrace: Remove unused pointer ftrace_swapper_pid
tracing: More reverting of "tracing: Centralize preemptirq tracepoints and unify their usage"
tracing/irqsoff: Handle preempt_count for different configs
tracing: Partial revert of "tracing: Centralize preemptirq tracepoints and unify their usage"
tracing: irqsoff: Account for additional preempt_disable
trace: Use rcu_dereference_raw for hooks from trace-event subsystem
tracing/kprobes: Fix within_notrace_func() to check only notrace functions
...
The Linux kernel adopted the SPDX License format headers to ease license
compliance management, and uses the C++ '//' style comments for the SPDX
header tags. Some files in the tracing directory used the C style /* */
comments for them. To be consistent across all files, replace the /* */
C style SPDX tags with the C++ // SPDX tags.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Masami Hiramatsu reported:
Current trace-enable attribute in sysfs returns an error
if user writes the same setting value as current one,
e.g.
# cat /sys/block/sda/trace/enable
0
# echo 0 > /sys/block/sda/trace/enable
bash: echo: write error: Invalid argument
# echo 1 > /sys/block/sda/trace/enable
# echo 1 > /sys/block/sda/trace/enable
bash: echo: write error: Device or resource busy
But this is not a preferred behavior, it should ignore
if new setting is same as current one. This fixes the
problem as below.
# cat /sys/block/sda/trace/enable
0
# echo 0 > /sys/block/sda/trace/enable
# echo 1 > /sys/block/sda/trace/enable
# echo 1 > /sys/block/sda/trace/enable
Link: http://lkml.kernel.org/r/20180816103802.08678002@gandalf.local.home
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: cd649b8bb8 ("blktrace: remove sysfs_blk_trace_enable_show/store()")
Reported-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-mcount-nop gcc option generates the calls to the profiling functions
as nops which allows to avoid patching mcount jump with NOP instructions
initially.
-mcount-nop gcc option will be activated if platform selects
HAVE_NOP_MCOUNT and gcc actually supports it.
In addition to that CC_USING_NOP_MCOUNT is defined and could be used by
architectures to adapt ftrace patching behavior.
Link: http://lkml.kernel.org/r/patch-3.thread-aa7b8d.git-e02ed2dc082b.your-ad-here.call-01533557518-ext-9465@work.hours
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABAgAGBQJbct5hAAoJEFKgDEdIgJTysFoP/jRoozkNpUr4fqcbN+1GCSjY
/vaWMJ6cQBHm9b5AE+EYwomTqx5gkaaAw8oR3tnHvBa2NGsE4xzO2LUyuH95FgMo
cE74MGS492xeCskEBHk0pbrdD+DOuIIqWlQcDP0mH0OhlBiuW/+j72HhDfOU5yTv
uE/X+SyxnYgWW9rKGrkmHqVwJPiEgjtr1tsfsewWVF4MNndCAFYeOgpFZBfhBdnq
g57IRjTHLnkAClFrOzUpGIZ/tvN6iyENug860EORYFzSO2SVZ3Jm7v8AcXLQ6lj0
LKmBAoFWeJ95rqJS+rBq3s0hWQLtbVJgQyz2ujN5+a+oZ/+brtQmTHjD9Nri0cSf
cKUmSfMX4tqdMcGjc7B2RqAtdthst2kYy6RXlp4BzYcdoxDr4U45VTqS8gZQuPSt
cdLUgoUEEX7nt1zlQER6GDzWc3FVKDXSHbDM+4OykFF3k1JCgoDq0kemAmsZw2A6
2QGs7RqBKYidR7DB+beZj2YV0ihRkykwb5c+NUASJV5mIB8TjjmOEw52Q0Fc9Hl1
WbA0wm/+pNG7ur9hF0VZ7zy9Rfxgx2Ec5ekWGTgt8xog3B1Dsqix5RpGRDX/f1u8
/dJxHD70pzADwdXXF5hrdCRtCXsTd/27SnWREYhMhfqwu/awc3boOKonOITCYmvv
7eiffcIaUbfiKsIhgrf+
=TTFG
-----END PGP SIGNATURE-----
Merge tag 'printk-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk
Pull printk updates from Petr Mladek:
- Different vendors have a different expectation about a console
quietness. Make it configurable to reduce bike-shedding about the
upstream default
- Decide about the message visibility when the message is stored. It
avoids races caused by a delayed console handling
- Always store printk() messages into the per-CPU buffers again in NMI.
The only exception is when flushing trace log in panic(). There the
risk of loosing messages is worth an eventual reordering
- Handle invalid %pO printf modifiers correctly
- Better handle %p printf modifier tests before crng is initialized
- Some clean up
* tag 'printk-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
lib/vsprintf: Do not handle %pO[^F] as %px
printk: Fix warning about unused suppress_message_printing
printk/nmi: Prevent deadlock when accessing the main log buffer in NMI
printk: Create helper function to queue deferred console handling
printk: Split the code for storing a message into the log buffer
printk: Clean up syslog_print_all()
printk: Remove unnecessary kmalloc() from syslog during clear
printk: Make CONSOLE_LOGLEVEL_QUIET configurable
printk: make sure to print log on console.
lib/test_printf.c: accept "ptrval" as valid result for plain 'p' tests
small fixes and updates. We also have new ktime_get_*() docs from Arnd,
some kernel-doc fixes, a new set of Italian translations (non so se vale la
pena, ma non fa male - speriamo bene), and some extensive early
memory-management documentation improvements from Mike Rapoport.
-----BEGIN PGP SIGNATURE-----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=x/P0
-----END PGP SIGNATURE-----
Merge tag 'docs-4.19' of git://git.lwn.net/linux
Pull documentation update from Jonathan Corbet:
"This was a moderately busy cycle for docs, with the usual collection
of small fixes and updates.
We also have new ktime_get_*() docs from Arnd, some kernel-doc fixes,
a new set of Italian translations (non so se vale la pena, ma non fa
male - speriamo bene), and some extensive early memory-management
documentation improvements from Mike Rapoport"
* tag 'docs-4.19' of git://git.lwn.net/linux: (52 commits)
Documentation: corrections to console/console.txt
Documentation: add ioctl number entry for v4l2-subdev.h
Remove gendered language from management style documentation
scripts/kernel-doc: Escape all literal braces in regexes
docs/mm: add description of boot time memory management
docs/mm: memblock: add overview documentation
docs/mm: memblock: add kernel-doc description for memblock types
docs/mm: memblock: add kernel-doc comments for memblock_add[_node]
docs/mm: memblock: update kernel-doc comments
mm/memblock: add a name for memblock flags enumeration
docs/mm: bootmem: add overview documentation
docs/mm: bootmem: add kernel-doc description of 'struct bootmem_data'
docs/mm: bootmem: fix kernel-doc warnings
docs/mm: nobootmem: fixup kernel-doc comments
mm/bootmem: drop duplicated kernel-doc comments
Documentation: vm.txt: Adding 'nr_hugepages_mempolicy' parameter description.
doc:it_IT: translation for kernel-hacking
docs: Fix the reference labels in Locking.rst
doc: tracing: Fix a typo of trace_stat
mm: Introduce new type vm_fault_t
...
-----BEGIN PGP SIGNATURE-----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=b9ib
-----END PGP SIGNATURE-----
Merge tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"First pull request for this merge window, there will also be a
followup request with some stragglers.
This pull request contains:
- Fix for a thundering heard issue in the wbt block code (Anchal
Agarwal)
- A few NVMe pull requests:
* Improved tracepoints (Keith)
* Larger inline data support for RDMA (Steve Wise)
* RDMA setup/teardown fixes (Sagi)
* Effects log suppor for NVMe target (Chaitanya Kulkarni)
* Buffered IO suppor for NVMe target (Chaitanya Kulkarni)
* TP4004 (ANA) support (Christoph)
* Various NVMe fixes
- Block io-latency controller support. Much needed support for
properly containing block devices. (Josef)
- Series improving how we handle sense information on the stack
(Kees)
- Lightnvm fixes and updates/improvements (Mathias/Javier et al)
- Zoned device support for null_blk (Matias)
- AIX partition fixes (Mauricio Faria de Oliveira)
- DIF checksum code made generic (Max Gurtovoy)
- Add support for discard in iostats (Michael Callahan / Tejun)
- Set of updates for BFQ (Paolo)
- Removal of async write support for bsg (Christoph)
- Bio page dirtying and clone fixups (Christoph)
- Set of bcache fix/changes (via Coly)
- Series improving blk-mq queue setup/teardown speed (Ming)
- Series improving merging performance on blk-mq (Ming)
- Lots of other fixes and cleanups from a slew of folks"
* tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-block: (190 commits)
blkcg: Make blkg_root_lookup() work for queues in bypass mode
bcache: fix error setting writeback_rate through sysfs interface
null_blk: add lock drop/acquire annotation
Blk-throttle: reduce tail io latency when iops limit is enforced
block: paride: pd: mark expected switch fall-throughs
block: Ensure that a request queue is dissociated from the cgroup controller
block: Introduce blk_exit_queue()
blkcg: Introduce blkg_root_lookup()
block: Remove two superfluous #include directives
blk-mq: count the hctx as active before allocating tag
block: bvec_nr_vecs() returns value for wrong slab
bcache: trivial - remove tailing backslash in macro BTREE_FLAG
bcache: make the pr_err statement used for ENOENT only in sysfs_attatch section
bcache: set max writeback rate when I/O request is idle
bcache: add code comments for bset.c
bcache: fix mistaken comments in request.c
bcache: fix mistaken code comments in bcache.h
bcache: add a comment in super.c
bcache: avoid unncessary cache prefetch bch_btree_node_get()
bcache: display rate debug parameters to 0 when writeback is not running
...
While debugging another bug, I was looking at all the synchronize*()
functions being used in kernel/trace, and noticed that trace_uprobes was
using synchronize_sched(), with a comment to synchronize with
{u,ret}_probe_trace_func(). When looking at those functions, the data is
protected with "rcu_read_lock()" and not with "rcu_read_lock_sched()". This
is using the wrong synchronize_*() function.
Link: http://lkml.kernel.org/r/20180809160553.469e1e32@gandalf.local.home
Cc: stable@vger.kernel.org
Fixes: 70ed91c6ec ("tracing/uprobes: Support ftrace_event_file base multibuffer")
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Now that some trace events can be protected by srcu_read_lock(tracepoint_srcu),
we need to make sure all locations that depend on this are also protected.
There were many places that did a synchronize_sched() thinking that it was
enough to protect againts access to trace events. This use to be the case,
but now that we use SRCU for _rcuidle() trace events, they may not be
protected by synchronize_sched(), as they may be called in paths that RCU is
not watching for preempt disable.
Fixes: e6753f23d9 ("tracepoint: Make rcuidle tracepoint callers use SRCU")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pointer ftrace_swapper_pid is defined but is never used hence it is
redundant and can be removed. The use of this variable was removed
in commit 345ddcc882 ("ftrace: Have set_ftrace_pid use the bitmap
like events do").
Cleans up clang warning:
warning: 'ftrace_swapper_pid' defined but not used [-Wunused-const-variable=]
Link: http://lkml.kernel.org/r/20180809125609.13142-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Joel Fernandes created a nice patch that cleaned up the duplicate hooks used
by lockdep and irqsoff latency tracer. It made both use tracepoints. But the
latency tracer is triggering warnings when using tracepoints to call into
the latency tracer's routines. Mainly, they can be called from NMI context.
If that happens, then the SRCU may not work properly because on some
architectures, SRCU is not safe to be called in both NMI and non-NMI
context.
This is a partial revert of the clean up patch c3bc8fd637 ("tracing:
Centralize preemptirq tracepoints and unify their usage") that adds back the
direct calls into the latency tracer. It also only calls the trace events
when not in NMI.
Link: http://lkml.kernel.org/r/20180809210654.622445925@goodmis.org
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Fixes: c3bc8fd637 ("tracing: Centralize preemptirq tracepoints and unify their usage")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
I was hitting the following warning:
WARNING: CPU: 0 PID: 1 at kernel/trace/trace_irqsoff.c:631 tracer_hardirqs_off+0x15/0x2a
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.18.0-rc6-test+ #13
Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014
EIP: tracer_hardirqs_off+0x15/0x2a
Code: ff 85 c0 74 0e 8b 45 00 8b 50 04 8b 45 04 e8 35 ff ff ff 5d c3 55 64 a1 cc 37 51 c1 a9 ff ff ff 7f 89 e5 53 89 d3 89 ca 75 02 <0f> 0b e8 90 fc ff ff 85 c0 74 07 89 d8 e8 0c ff ff ff 5b 5d c3 55
EAX: 80000000 EBX: c04337f0 ECX: c04338e3 EDX: c04338e3
ESI: c04337f0 EDI: c04338e3 EBP: f2aa1d68 ESP: f2aa1d64
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00210046
CR0: 80050033 CR2: 00000000 CR3: 01668000 CR4: 001406f0
Call Trace:
trace_irq_disable_rcuidle+0x63/0x6c
trace_hardirqs_off+0x26/0x30
default_send_IPI_mask_allbutself_logical+0x31/0x93
default_send_IPI_allbutself+0x37/0x48
native_send_call_func_ipi+0x4d/0x6a
smp_call_function_many+0x165/0x19d
? add_nops+0x34/0x34
? trace_hardirqs_on_caller+0x2d/0x2d
? add_nops+0x34/0x34
smp_call_function+0x1f/0x23
on_each_cpu+0x15/0x43
? trace_hardirqs_on_caller+0x2d/0x2d
? trace_hardirqs_on_caller+0x2d/0x2d
? trace_irq_disable_rcuidle+0x1/0x6c
text_poke_bp+0xa0/0xc2
? trace_hardirqs_on_caller+0x2d/0x2d
arch_jump_label_transform+0xa7/0xcb
? trace_irq_disable_rcuidle+0x5/0x6c
__jump_label_update+0x3e/0x6d
jump_label_update+0x7d/0x81
static_key_slow_inc_cpuslocked+0x58/0x6d
static_key_slow_inc+0x19/0x20
tracepoint_probe_register_prio+0x19e/0x1d1
? start_critical_timings+0x1c/0x1c
tracepoint_probe_register+0xf/0x11
irqsoff_tracer_init+0x21/0xf2
tracer_init+0x16/0x1a
trace_selftest_startup_irqsoff+0x25/0xc4
run_tracer_selftest+0xca/0x131
register_tracer+0xd5/0x172
? trace_event_define_fields_preemptirq_template+0x45/0x45
init_irqsoff_tracer+0xd/0x11
do_one_initcall+0xab/0x1e8
? rcu_read_lock_sched_held+0x3d/0x44
? trace_initcall_level+0x52/0x86
kernel_init_freeable+0x195/0x21a
? rest_init+0xb4/0xb4
kernel_init+0xd/0xe4
ret_from_fork+0x2e/0x38
It is due to running a CONFIG_PREEMPT_VOLUNTARY kernel, which would trigger
this warning every time:
WARN_ON_ONCE(preempt_count());
Because on CONFIG_PREEMPT_VOLUNTARY, preempt_count() is always zero.
This warning is to make sure preempt_count is set because
tracer_hardirqs_on() does a preempt_enable_notrace() to make the
preempt_trace() work properly, as being called by a trace event, the trace
event code disables preemption, and the tracer wants to know what the
preemption was before it was called.
Instead of enabling preemption like this, just record the preempt_count,
subtract PREEMPT_DISABLE_OFFSET from it (which is zero with !CONFIG_PREEMPT
set), and pass that value to the necessary functions, which should use the
passed in parameter instead of calling preempt_count() directly.
Fixes: da5b3ebb45 ("tracing: irqsoff: Account for additional preempt_disable")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Joel Fernandes created a nice patch that cleaned up the duplicate hooks used
by lockdep and irqsoff latency tracer. It made both use tracepoints. But it
caused lockdep to trigger several false positives. We have not figured out
why yet, but removing lockdep from using the trace event hooks and just call
its helper functions directly (like it use to), makes the problem go away.
This is a partial revert of the clean up patch c3bc8fd637 ("tracing:
Centralize preemptirq tracepoints and unify their usage") that adds direct
calls for lockdep, but also keeps most of the clean up done to get rid of
the horrible preprocessor if statements.
Link: http://lkml.kernel.org/r/20180806155058.5ee875f4@gandalf.local.home
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Fixes: c3bc8fd637 ("tracing: Centralize preemptirq tracepoints and unify their usage")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Recently we tried to make the preemptirqsoff tracer to use irqsoff
tracepoint probes. However this causes issues as reported by Masami:
[2.271078] Testing tracer preemptirqsoff: .. no entries found ..FAILED!
[2.381015] WARNING: CPU: 0 PID: 1 at /home/mhiramat/ksrc/linux/kernel/
trace/trace.c:1512 run_tracer_selftest+0xf3/0x154
This is due to the tracepoint code increasing the preempt nesting count
by calling an additional preempt_disable before calling into the
preemptoff tracer which messes up the preempt_count() check in
tracer_hardirqs_off.
To fix this, make the irqsoff tracer probes balance the additional outer
preempt_disable with a preempt_enable_notrace.
The other way to fix this is to just use SRCU for all tracepoints.
However we can't do that because we can't use NMIs from RCU context.
Link: http://lkml.kernel.org/r/20180806034049.67949-1-joel@joelfernandes.org
Fixes: c3bc8fd637 ("tracing: Centralize preemptirq tracepoints and unify their usage")
Fixes: e6753f23d9 ("tracepoint: Make rcuidle tracepoint callers use SRCU")
Reported-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAltU8z0eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG5X8H/2fJr7m3k242+t76
sitwvx1eoPqTgryW59dRKm9IuXAGA+AjauvHzaz1QxomeQa50JghGWefD0eiJfkA
1AphQ/24EOiAbbVk084dAI/C2p122dE4D5Fy7CrfLnuouyrbFaZI5STbnrRct7sR
9deeYW0GDHO1Uenp4WDCj0baaqJqaevZ+7GG09DnWpya2nQtSkGBjqn6GpYmrfOU
mqFuxAX8mEOW6cwK16y/vYtnVjuuMAiZ63/OJ8AQ6d6ArGLwAsdn7f8Fn4I4tEr2
L0d3CRLUyegms4++Dmlu05k64buQu46WlPhjCZc5/Ts4kjrNxBuHejj2/jeSnUSt
vJJlibI=
=42a5
-----END PGP SIGNATURE-----
Merge tag 'v4.18-rc6' into for-4.19/block2
Pull in 4.18-rc6 to get the NVMe core AEN change to avoid a
merge conflict down the line.
Signed-of-by: Jens Axboe <axboe@kernel.dk>
Fix within_notrace_func() to check only notrace functions and to ignore the
kprobe-event which can not solve symbol addresses.
within_notrace_func() returns true if the given kprobe events probe point
seems to be out-of-range. But that is not the correct place to check for it,
it should be done in kprobes afterwards.
kprobe-events allow users to define a probe point on "currently unloaded
module" so that it can trace the event during module load. In this case, the
user will put a probe on a symbol which is not in kallsyms yet and it hits
the within_notrace_func(). As a result, kprobe-events always refuses if
user defines a probe on a "currenly unloaded module".
Fixes: commit 45408c4f92 ("tracing: kprobes: Prohibit probing on notrace function")
Link: http://lkml.kernel.org/r/153319624799.29007.13604430345640129926.stgit@devbox
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Return statements in functions returning bool should use true or false
instead of an integer value.
This code was detected with the help of Coccinelle.
Link: http://lkml.kernel.org/r/20180802010056.GA31012@embeddedor.com
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The value of ring_buffer_record_is_set_on() is either true or false, so have
its return value be bool.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The value of ring_buffer_record_is_on() is either true or false, so have its
return value be bool.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
There's code that expects tracer_tracing_is_on() to be either true or false,
not some random number. Currently, it should only return one or zero, but
just in case, change its return value to bool, to enforce it.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The start function of the hwlat tracer should never be called when the hwlat
thread already exists. If it is called, do a WARN_ON().
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The hwlat tracer uses a kernel thread to measure latencies. The function
that creates this kernel thread, start_kthread(), can be called when the
tracer is initialized and when the tracer is explicitly enabled.
start_kthread() does not check if there is an existing hwlat kernel
thread and will create a new one each time it is called.
This causes the reference to the previous thread to be lost. Without the
thread reference, the old kernel thread becomes unstoppable and
continues to use CPU time even after the hwlat tracer has been disabled.
This problem can be observed when a system is booted with tracing
enabled and the hwlat tracer is configured like this:
echo hwlat > current_tracer; echo 1 > tracing_on
Add the missing check for an existing kernel thread in start_kthread()
to prevent this problem. This function and the rest of the hwlat kernel
thread setup and teardown are already serialized because they are called
through the tracer core code with trace_type_lock held.
[
Note, this only fixes the symptom. The real fix was not to call
this function when tracing_on was already one. But this still makes
the code more robust, so we'll add it.
]
Link: http://lkml.kernel.org/r/1533120354-22923-1-git-send-email-erica.bugden@linutronix.de
Signed-off-by: Erica Bugden <erica.bugden@linutronix.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Currently, when one echo's in 1 into tracing_on, the current tracer's
"start()" function is executed, even if tracing_on was already one. This can
lead to strange side effects. One being that if the hwlat tracer is enabled,
and someone does "echo 1 > tracing_on" into tracing_on, the hwlat tracer's
start() function is called again which will recreate another kernel thread,
and make it unable to remove the old one.
Link: http://lkml.kernel.org/r/1533120354-22923-1-git-send-email-erica.bugden@linutronix.de
Cc: stable@vger.kernel.org
Fixes: 2df8f8a6a8 ("tracing: Fix regression with irqsoff tracer and tracing_on file")
Reported-by: Erica Bugden <erica.bugden@linutronix.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This patch detaches the preemptirq tracepoints from the tracers and
keeps it separate.
Advantages:
* Lockdep and irqsoff event can now run in parallel since they no longer
have their own calls.
* This unifies the usecase of adding hooks to an irqsoff and irqson
event, and a preemptoff and preempton event.
3 users of the events exist:
- Lockdep
- irqsoff and preemptoff tracers
- irqs and preempt trace events
The unification cleans up several ifdefs and makes the code in preempt
tracer and irqsoff tracers simpler. It gets rid of all the horrific
ifdeferry around PROVE_LOCKING and makes configuration of the different
users of the tracepoints more easy and understandable. It also gets rid
of the time_* function calls from the lockdep hooks used to call into
the preemptirq tracer which is not needed anymore. The negative delta in
lines of code in this patch is quite large too.
In the patch we introduce a new CONFIG option PREEMPTIRQ_TRACEPOINTS
as a single point for registering probes onto the tracepoints. With
this,
the web of config options for preempt/irq toggle tracepoints and its
users becomes:
PREEMPT_TRACER PREEMPTIRQ_EVENTS IRQSOFF_TRACER PROVE_LOCKING
| | \ | |
\ (selects) / \ \ (selects) /
TRACE_PREEMPT_TOGGLE ----> TRACE_IRQFLAGS
\ /
\ (depends on) /
PREEMPTIRQ_TRACEPOINTS
Other than the performance tests mentioned in the previous patch, I also
ran the locking API test suite. I verified that all tests cases are
passing.
I also injected issues by not registering lockdep probes onto the
tracepoints and I see failures to confirm that the probes are indeed
working.
This series + lockdep probes not registered (just to inject errors):
[ 0.000000] hard-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000000] soft-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000000] sirq-safe-A => hirqs-on/12:FAILED|FAILED| ok |
[ 0.000000] sirq-safe-A => hirqs-on/21:FAILED|FAILED| ok |
[ 0.000000] hard-safe-A + irqs-on/12:FAILED|FAILED| ok |
[ 0.000000] soft-safe-A + irqs-on/12:FAILED|FAILED| ok |
[ 0.000000] hard-safe-A + irqs-on/21:FAILED|FAILED| ok |
[ 0.000000] soft-safe-A + irqs-on/21:FAILED|FAILED| ok |
[ 0.000000] hard-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/123: ok | ok | ok |
With this series + lockdep probes registered, all locking tests pass:
[ 0.000000] hard-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000000] soft-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000000] sirq-safe-A => hirqs-on/12: ok | ok | ok |
[ 0.000000] sirq-safe-A => hirqs-on/21: ok | ok | ok |
[ 0.000000] hard-safe-A + irqs-on/12: ok | ok | ok |
[ 0.000000] soft-safe-A + irqs-on/12: ok | ok | ok |
[ 0.000000] hard-safe-A + irqs-on/21: ok | ok | ok |
[ 0.000000] soft-safe-A + irqs-on/21: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/123: ok | ok | ok |
Link: http://lkml.kernel.org/r/20180730222423.196630-4-joel@joelfernandes.org
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Move selftest function to its own compile unit so it can be compiled
with the ftrace cflags (CC_FLAGS_FTRACE) allowing it to be probed
during the ftrace startup tests.
Link: http://lkml.kernel.org/r/153294604271.32740.16490677128630177030.stgit@devbox
Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Prohibit kprobe-events probing on notrace functions. Since probing on a
notrace function can cause a recursive event call. In most cases those are just
skipped, but in some cases it falls into an infinite recursive call.
This protection can be disabled by the kconfig
CONFIG_KPROBE_EVENTS_ON_NOTRACE=y, but it is highly recommended to keep it
"n" for normal kernel builds. Note that this is only available if "kprobes on
ftrace" has been implemented on the target arch and CONFIG_KPROBES_ON_FTRACE=y.
Link: http://lkml.kernel.org/r/153294601436.32740.10557881188933661239.stgit@devbox
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Francis Deslauriers <francis.deslauriers@efficios.com>
[ Slight grammar and spelling fixes ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Automatically found by kbuild test robot.
Fixes: ffdc73a3b2ad ("lib: Add module for testing preemptoff/irqsoff latency tracers")
Signed-off-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The function enable_trace_kprobe() performs slightly differently if the file
parameter is passed in as NULL on non-NULL. Instead of checking file twice,
move the code between the two tests into a static inline helper function to
make the code easier to follow.
Link: http://lkml.kernel.org/r/20180725224728.7b1d5db2@vmware.local.home
Link: http://lkml.kernel.org/r/20180726121152.4dd54330@gandalf.local.home
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The name of the directory for per-cpu function statistics
is trace_stat, not trace_stats.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Remove ftrace_nr_registered_ops() because it is no longer used.
ftrace_nr_registered_ops() has been introduced by commit ea701f11da
("ftrace: Add selftest to test function trace recursion protection"), but
its caller has been removed by commit 05cbbf643b ("tracing: Fix selftest
function recursion accounting"). So it is not called anymore.
Link: http://lkml.kernel.org/r/153260907227.12474.5234899025934963683.stgit@devbox
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Remove using_ftrace_ops_list_func() since it is no longer used.
Using ftrace_ops_list_func() has been introduced by commit 7eea4fce02
("tracing/stack_trace: Skip 4 instead of 3 when using ftrace_ops_list_func")
as a helper function, but its caller has been removed by commit 72ac426a5b
("tracing: Clean up stack tracing and fix fentry updates"). So it is not
called anymore.
Link: http://lkml.kernel.org/r/153260904427.12474.9952096317439329851.stgit@devbox
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Nothing uses unregister_trigger() outside of trace_events_trigger.c file,
thus it should be static. Not sure why this was ever converted, because
its counter part, register_trigger(), was always static.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Here we introduce a test module for introducing a long preempt or irq
disable delay in the kernel which the preemptoff or irqsoff tracers can
detect. This module is to be used only for test purposes and is default
disabled.
Following is the expected output (only briefly shown) that can be parsed
to verify that the tracers are working correctly. We will use this from
the kselftests in future patches.
For the preemptoff tracer:
echo preemptoff > /d/tracing/current_tracer
sleep 1
insmod ./preemptirq_delay_test.ko test_mode=preempt delay=500000
sleep 1
bash-4.3# cat /d/tracing/trace
preempt -1066 2...2 0us@: preemptirq_delay_run <-preemptirq_delay_run
preempt -1066 2...2 500002us : preemptirq_delay_run <-preemptirq_delay_run
preempt -1066 2...2 500004us : tracer_preempt_on <-preemptirq_delay_run
preempt -1066 2...2 500012us : <stack trace>
=> kthread
=> ret_from_fork
For the irqsoff tracer:
echo irqsoff > /d/tracing/current_tracer
sleep 1
insmod ./preemptirq_delay_test.ko test_mode=irq delay=500000
sleep 1
bash-4.3# cat /d/tracing/trace
irq dis -1069 1d..1 0us@: preemptirq_delay_run
irq dis -1069 1d..1 500001us : preemptirq_delay_run
irq dis -1069 1d..1 500002us : tracer_hardirqs_on <-preemptirq_delay_run
irq dis -1069 1d..1 500005us : <stack trace>
=> ret_from_fork
Link: http://lkml.kernel.org/r/20180712213611.GA8743@joelaf.mtv.corp.google.com
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Julia Cartwright <julia@ni.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Glexiner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ Erick is a co-developer of this commit ]
Signed-off-by: Erick Reyes <erickreyes@google.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Split reset functions into seperate functions in preparation
of future patches that need to do tracer specific reset.
Link: http://lkml.kernel.org/r/20180628182149.226164-4-joel@joelfernandes.org
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Commit 57ea2a34ad ("tracing/kprobes: Fix trace_probe flags on
enable_trace_kprobe() failure") added an if statement that depends on another
if statement that gcc doesn't see will initialize the "link" variable and
gives the warning:
"warning: 'link' may be used uninitialized in this function"
It is really a false positive, but to quiet the warning, and also to make
sure that it never actually is used uninitialized, initialize the "link"
variable to NULL and add an if (!WARN_ON_ONCE(!link)) where the compiler
thinks it could be used uninitialized.
Cc: stable@vger.kernel.org
Fixes: 57ea2a34ad ("tracing/kprobes: Fix trace_probe flags on enable_trace_kprobe() failure")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
There was a case that triggered a double free in event_trigger_callback()
due to the called reg() function freeing the trigger_data and then it
getting freed again by the error return by the caller. The solution there
was to up the trigger_data ref count.
Code inspection found that event_enable_trigger_func() has the same issue,
but is not as easy to trigger (requires harder to trigger failures). It
needs to be solved slightly different as it needs more to clean up when the
reg() function fails.
Link: http://lkml.kernel.org/r/20180725124008.7008e586@gandalf.local.home
Cc: stable@vger.kernel.org
Fixes: 7862ad1846 ("tracing: Add 'enable_event' and 'disable_event' event trigger commands")
Reivewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
If enable_trace_kprobe fails to enable the probe in enable_k(ret)probe
it returns an error, but does not unset the tp flags it set previously.
This results in a probe being considered enabled and failures like being
unable to remove the probe through kprobe_events file since probes_open()
expects every probe to be disabled.
Link: http://lkml.kernel.org/r/20180725102826.8300-1-asavkov@redhat.com
Link: http://lkml.kernel.org/r/20180725142038.4765-1-asavkov@redhat.com
Cc: Ingo Molnar <mingo@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 41a7dd420c ("tracing/kprobes: Support ftrace_event_file base multibuffer")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Maintain the tracing on/off setting of the ring_buffer when switching
to the trace buffer snapshot.
Taking a snapshot is done by swapping the backup ring buffer
(max_tr_buffer). But since the tracing on/off setting is defined
by the ring buffer, when swapping it, the tracing on/off setting
can also be changed. This causes a strange result like below:
/sys/kernel/debug/tracing # cat tracing_on
1
/sys/kernel/debug/tracing # echo 0 > tracing_on
/sys/kernel/debug/tracing # cat tracing_on
0
/sys/kernel/debug/tracing # echo 1 > snapshot
/sys/kernel/debug/tracing # cat tracing_on
1
/sys/kernel/debug/tracing # echo 1 > snapshot
/sys/kernel/debug/tracing # cat tracing_on
0
We don't touch tracing_on, but snapshot changes tracing_on
setting each time. This is an anomaly, because user doesn't know
that each "ring_buffer" stores its own tracing-enable state and
the snapshot is done by swapping ring buffers.
Link: http://lkml.kernel.org/r/153149929558.11274.11730609978254724394.stgit@devbox
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Hiraku Toyooka <hiraku.toyooka@cybertrust.co.jp>
Cc: stable@vger.kernel.org
Fixes: debdd57f51 ("tracing: Make a snapshot feature available from userspace")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
[ Updated commit log and comment in the code ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Running the following:
# cd /sys/kernel/debug/tracing
# echo 500000 > buffer_size_kb
[ Or some other number that takes up most of memory ]
# echo snapshot > events/sched/sched_switch/trigger
Triggers the following bug:
------------[ cut here ]------------
kernel BUG at mm/slub.c:296!
invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
CPU: 6 PID: 6878 Comm: bash Not tainted 4.18.0-rc6-test+ #1066
Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016
RIP: 0010:kfree+0x16c/0x180
Code: 05 41 0f b6 72 51 5b 5d 41 5c 4c 89 d7 e9 ac b3 f8 ff 48 89 d9 48 89 da 41 b8 01 00 00 00 5b 5d 41 5c 4c 89 d6 e9 f4 f3 ff ff <0f> 0b 0f 0b 48 8b 3d d9 d8 f9 00 e9 c1 fe ff ff 0f 1f 40 00 0f 1f
RSP: 0018:ffffb654436d3d88 EFLAGS: 00010246
RAX: ffff91a9d50f3d80 RBX: ffff91a9d50f3d80 RCX: ffff91a9d50f3d80
RDX: 00000000000006a4 RSI: ffff91a9de5a60e0 RDI: ffff91a9d9803500
RBP: ffffffff8d267c80 R08: 00000000000260e0 R09: ffffffff8c1a56be
R10: fffff0d404543cc0 R11: 0000000000000389 R12: ffffffff8c1a56be
R13: ffff91a9d9930e18 R14: ffff91a98c0c2890 R15: ffffffff8d267d00
FS: 00007f363ea64700(0000) GS:ffff91a9de580000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055c1cacc8e10 CR3: 00000000d9b46003 CR4: 00000000001606e0
Call Trace:
event_trigger_callback+0xee/0x1d0
event_trigger_write+0xfc/0x1a0
__vfs_write+0x33/0x190
? handle_mm_fault+0x115/0x230
? _cond_resched+0x16/0x40
vfs_write+0xb0/0x190
ksys_write+0x52/0xc0
do_syscall_64+0x5a/0x160
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f363e16ab50
Code: 73 01 c3 48 8b 0d 38 83 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 79 db 2c 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 1e e3 01 00 48 89 04 24
RSP: 002b:00007fff9a4c6378 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000009 RCX: 00007f363e16ab50
RDX: 0000000000000009 RSI: 000055c1cacc8e10 RDI: 0000000000000001
RBP: 000055c1cacc8e10 R08: 00007f363e435740 R09: 00007f363ea64700
R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000009
R13: 0000000000000001 R14: 00007f363e4345e0 R15: 00007f363e4303c0
Modules linked in: ip6table_filter ip6_tables snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device i915 snd_pcm snd_timer i2c_i801 snd soundcore i2c_algo_bit drm_kms_helper
86_pkg_temp_thermal video kvm_intel kvm irqbypass wmi e1000e
---[ end trace d301afa879ddfa25 ]---
The cause is because the register_snapshot_trigger() call failed to
allocate the snapshot buffer, and then called unregister_trigger()
which freed the data that was passed to it. Then on return to the
function that called register_snapshot_trigger(), as it sees it
failed to register, it frees the trigger_data again and causes
a double free.
By calling event_trigger_init() on the trigger_data (which only ups
the reference counter for it), and then event_trigger_free() afterward,
the trigger_data would not get freed by the registering trigger function
as it would only up and lower the ref count for it. If the register
trigger function fails, then the event_trigger_free() called after it
will free the trigger data normally.
Link: http://lkml.kernel.org/r/20180724191331.738eb819@gandalf.local.home
Cc: stable@vger.kerne.org
Fixes: 93e31ffbf4 ("tracing: Add 'snapshot' event trigger command")
Reported-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Currently ftrace displays data in trace output like so:
_-----=> irqs-off
/ _----=> need-resched
| / _---=> hardirq/softirq
|| / _--=> preempt-depth
||| / delay
TASK-PID CPU TGID |||| TIMESTAMP FUNCTION
| | | | |||| | |
bash-1091 [000] ( 1091) d..2 28.313544: sched_switch:
However Android's trace visualization tools expect a slightly different
format due to an out-of-tree patch patch that was been carried for a
decade, notice that the TGID and CPU fields are reversed:
_-----=> irqs-off
/ _----=> need-resched
| / _---=> hardirq/softirq
|| / _--=> preempt-depth
||| / delay
TASK-PID TGID CPU |||| TIMESTAMP FUNCTION
| | | | |||| | |
bash-1091 ( 1091) [002] d..2 64.965177: sched_switch:
From kernel v4.13 onwards, during which TGID was introduced, tracing
with systrace on all Android kernels will break (most Android kernels
have been on 4.9 with Android patches, so this issues hasn't been seen
yet). From v4.13 onwards things will break.
The chrome browser's tracing tools also embed the systrace viewer which
uses the legacy TGID format and updates to that are known to be
difficult to make.
Considering this, I suggest we make this change to the upstream kernel
and backport it to all Android kernels. I believe this feature is merged
recently enough into the upstream kernel that it shouldn't be a problem.
Also logically, IMO it makes more sense to group the TGID with the
TASK-PID and the CPU after these.
Link: http://lkml.kernel.org/r/20180626000822.113931-1-joel@joelfernandes.org
Cc: jreck@google.com
Cc: tkjos@google.com
Cc: stable@vger.kernel.org
Fixes: 441dae8f2f ("tracing: Add support for display of tgid in trace output")
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
We don't release tk->tp.call.print_fmt when destroying
local uprobe. Also there's missing print_fmt kfree in
create_local_trace_kprobe error path.
Link: http://lkml.kernel.org/r/20180709141906.2390-1-jolsa@kernel.org
Cc: stable@vger.kernel.org
Fixes: e12f03d703 ("perf/core: Implement the 'perf_kprobe' PMU")
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Since @blk_debugfs_root couldn't be configured dynamically, we can
save a few memory allocation if it's not there.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The commit 719f6a7040 ("printk: Use the main logbuf in NMI
when logbuf_lock is available") brought back the possible deadlocks
in printk() and NMI.
The check of logbuf_lock is done only in printk_nmi_enter() to prevent
mixed output. But another CPU might take the lock later, enter NMI, and:
+ Both NMIs might be serialized by yet another lock, for example,
the one in nmi_cpu_backtrace().
+ The other CPU might get stopped in NMI, see smp_send_stop()
in panic().
The only safe solution is to use trylock when storing the message
into the main log-buffer. It might cause reordering when some lines
go to the main lock buffer directly and others are delayed via
the per-CPU buffer. It means that it is not useful in general.
This patch replaces the problematic NMI deferred context with NMI
direct context. It can be used to mark a code that might produce
many messages in NMI and the risk of losing them is more critical
than problems with eventual reordering.
The context is then used when dumping trace buffers on oops. It was
the primary motivation for the original fix. Also the reordering is
even smaller issue there because some traces have their own time stamps.
Finally, nmi_cpu_backtrace() need not longer be serialized because
it will always us the per-CPU buffers again.
Fixes: 719f6a7040 ("printk: Use the main logbuf in NMI when logbuf_lock is available")
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20180627142028.11259-1-pmladek@suse.com
To: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
clear_ftrace_function is not used outside of ftrace.c and is not help to
use a function, so nuke it per Steve's suggestion.
Link: http://lkml.kernel.org/r/1517537689-34947-1-git-send-email-xieyisheng1@huawei.com
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Silence warnings (triggered at W=1) by adding relevant __printf attributes.
CC kernel/trace/trace.o
kernel/trace/trace.c: In function ‘__trace_array_vprintk’:
kernel/trace/trace.c:2979:2: warning: function might be possible candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
len = vscnprintf(tbuffer, TRACE_BUF_SIZE, fmt, args);
^~~
AR kernel/trace/built-in.o
Link: http://lkml.kernel.org/r/20180308205843.27447-1-malat@debian.org
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Simplify and optimize the logic in trace_buffer_iter() to use a conditional
operation instead of an if conditional.
Link: http://lkml.kernel.org/r/20180408113631.3947-1-cugyly@163.com
Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The comment in create_filter() states that the passed in filter pointer
(filterp) will either be NULL or contain an error message stating why the
filter failed. But it also expects the filter pointer to point to NULL when
passed in. If it is not, the function create_filter_start() will warn and
return an error message without updating the filter pointer. This is not
what the comment states.
As we always expect the pointer to point to NULL, if it is not, trigger a
WARN_ON(), set it to NULL, and then continue the path as the rest will work
as the comment states. Also update the comment to state it must point to
NULL.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
'err' is used as a NUL-terminated string, but using strncpy() with the length
equal to the buffer size may result in lack of the termination:
kernel/trace/trace_events_hist.c: In function 'hist_err_event':
kernel/trace/trace_events_hist.c:396:3: error: 'strncpy' specified bound 256 equals destination size [-Werror=stringop-truncation]
strncpy(err, var, MAX_FILTER_STR_VAL);
This changes it to use the safer strscpy() instead.
Link: http://lkml.kernel.org/r/20180328140920.2842153-1-arnd@arndb.de
Cc: stable@vger.kernel.org
Fixes: f404da6e1d ("tracing: Add 'last error' error facility for hist triggers")
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Despite being mentioned at Documentation/trace/ftrace.rst as a
rst file, this file was still a text one, with several issues.
Convert it to ReST and add it to the trace index:
- Mark the document title as such;
- Identify and indent the literal blocks;
- Use the proper markups for table.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Make use of the swap macro and remove unnecessary variable _buf_.
This makes the code easier to read and maintain. Also, reduces the
stack usage.
This code was detected with the help of Coccinelle.
Link: http://lkml.kernel.org/r/20180209175316.GA18720@embeddedgus
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The syzkaller detected a out-of-bounds issue with the events filter code,
specifically here:
prog[N].pred = NULL; /* #13 */
prog[N].target = 1; /* TRUE */
prog[N+1].pred = NULL;
prog[N+1].target = 0; /* FALSE */
-> prog[N-1].target = N;
prog[N-1].when_to_branch = false;
As that's the first reference to a "N-1" index, it appears that the code got
here with N = 0, which means the filter parser found no filter to parse
(which shouldn't ever happen, but apparently it did).
Add a new error to the parsing code that will check to make sure that N is
not zero before going into this part of the code. If N = 0, then -EINVAL is
returned, and a error message is added to the filter.
Cc: stable@vger.kernel.org
Fixes: 80765597bc ("tracing: Rewrite filter logic to be simpler and faster")
Reported-by: air icy <icytxw@gmail.com>
bugzilla url: https://bugzilla.kernel.org/show_bug.cgi?id=200019
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Clear current_kprobe and enable preemption in kprobe
even if pre_handler returns !0.
This simplifies function override using kprobes.
Jprobe used to require to keep the preemption disabled and
keep current_kprobe until it returned to original function
entry. For this reason kprobe_int3_handler() and similar
arch dependent kprobe handers checks pre_handler result
and exit without enabling preemption if the result is !0.
After removing the jprobe, Kprobes does not need to
keep preempt disabled even if user handler returns !0
anymore.
But since the function override handler in error-inject
and bpf is also returns !0 if it overrides a function,
to balancing the preempt count, it enables preemption
and reset current kprobe by itself.
That is a bad design that is very buggy. This fixes
such unbalanced preempt-count and current_kprobes setting
in kprobes, bpf and error-inject.
Note: for powerpc and x86, this removes all preempt_disable
from kprobe_ftrace_handler because ftrace callbacks are
called under preempt disabled.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: linux-arch@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-s390@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: linux-snps-arc@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: sparclinux@vger.kernel.org
Link: https://lore.kernel.org/lkml/152942494574.15209.12323837825873032258.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
As we move stuff around, some doc references are broken. Fix some of
them via this script:
./scripts/documentation-file-ref-check --fix
Manually checked if the produced result is valid, removing a few
false-positives.
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Notable changes:
- Support for split PMD page table lock on 64-bit Book3S (Power8/9).
- Add support for HAVE_RELIABLE_STACKTRACE, so we properly support live
patching again.
- Add support for patching barrier_nospec in copy_from_user() and syscall entry.
- A couple of fixes for our data breakpoints on Book3S.
- A series from Nick optimising TLB/mm handling with the Radix MMU.
- Numerous small cleanups to squash sparse/gcc warnings from Mathieu Malaterre.
- Several series optimising various parts of the 32-bit code from Christophe Leroy.
- Removal of support for two old machines, "SBC834xE" and "C2K" ("GEFanuc,C2K"),
which is why the diffstat has so many deletions.
And many other small improvements & fixes.
There's a few out-of-area changes. Some minor ftrace changes OK'ed by Steve, and
a fix to our powernv cpuidle driver. Then there's a series touching mm, x86 and
fs/proc/task_mmu.c, which cleans up some details around pkey support. It was
ack'ed/reviewed by Ingo & Dave and has been in next for several weeks.
Thanks to:
Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Al Viro, Andrew
Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd Bergmann, Balbir Singh,
Cédric Le Goater, Christophe Leroy, Christophe Lombard, Colin Ian King, Dave
Hansen, Fabio Estevam, Finn Thain, Frederic Barrat, Gautham R. Shenoy, Haren
Myneni, Hari Bathini, Ingo Molnar, Jonathan Neuschäfer, Josh Poimboeuf,
Kamalesh Babulal, Madhavan Srinivasan, Mahesh Salgaonkar, Mark Greer, Mathieu
Malaterre, Matthew Wilcox, Michael Neuling, Michal Suchanek, Naveen N. Rao,
Nicholas Piggin, Nicolai Stange, Olof Johansson, Paul Gortmaker, Paul
Mackerras, Peter Rosin, Pridhiviraj Paidipeddi, Ram Pai, Rashmica Gupta, Ravi
Bangoria, Russell Currey, Sam Bobroff, Samuel Mendoza-Jonas, Segher
Boessenkool, Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stewart Smith,
Thiago Jung Bauermann, Torsten Duwe, Vaibhav Jain, Wei Yongjun, Wolfram Sang,
Yisheng Xie, YueHaibing.
-----BEGIN PGP SIGNATURE-----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=ZlBf
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Notable changes:
- Support for split PMD page table lock on 64-bit Book3S (Power8/9).
- Add support for HAVE_RELIABLE_STACKTRACE, so we properly support
live patching again.
- Add support for patching barrier_nospec in copy_from_user() and
syscall entry.
- A couple of fixes for our data breakpoints on Book3S.
- A series from Nick optimising TLB/mm handling with the Radix MMU.
- Numerous small cleanups to squash sparse/gcc warnings from Mathieu
Malaterre.
- Several series optimising various parts of the 32-bit code from
Christophe Leroy.
- Removal of support for two old machines, "SBC834xE" and "C2K"
("GEFanuc,C2K"), which is why the diffstat has so many deletions.
And many other small improvements & fixes.
There's a few out-of-area changes. Some minor ftrace changes OK'ed by
Steve, and a fix to our powernv cpuidle driver. Then there's a series
touching mm, x86 and fs/proc/task_mmu.c, which cleans up some details
around pkey support. It was ack'ed/reviewed by Ingo & Dave and has
been in next for several weeks.
Thanks to: Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Al
Viro, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd
Bergmann, Balbir Singh, Cédric Le Goater, Christophe Leroy, Christophe
Lombard, Colin Ian King, Dave Hansen, Fabio Estevam, Finn Thain,
Frederic Barrat, Gautham R. Shenoy, Haren Myneni, Hari Bathini, Ingo
Molnar, Jonathan Neuschäfer, Josh Poimboeuf, Kamalesh Babulal,
Madhavan Srinivasan, Mahesh Salgaonkar, Mark Greer, Mathieu Malaterre,
Matthew Wilcox, Michael Neuling, Michal Suchanek, Naveen N. Rao,
Nicholas Piggin, Nicolai Stange, Olof Johansson, Paul Gortmaker, Paul
Mackerras, Peter Rosin, Pridhiviraj Paidipeddi, Ram Pai, Rashmica
Gupta, Ravi Bangoria, Russell Currey, Sam Bobroff, Samuel
Mendoza-Jonas, Segher Boessenkool, Shilpasri G Bhat, Simon Guo,
Souptick Joarder, Stewart Smith, Thiago Jung Bauermann, Torsten Duwe,
Vaibhav Jain, Wei Yongjun, Wolfram Sang, Yisheng Xie, YueHaibing"
* tag 'powerpc-4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (251 commits)
powerpc/64s/radix: Fix missing ptesync in flush_cache_vmap
cpuidle: powernv: Fix promotion from snooze if next state disabled
powerpc: fix build failure by disabling attribute-alias warning in pci_32
ocxl: Fix missing unlock on error in afu_ioctl_enable_p9_wait()
powerpc-opal: fix spelling mistake "Uniterrupted" -> "Uninterrupted"
powerpc: fix spelling mistake: "Usupported" -> "Unsupported"
powerpc/pkeys: Detach execute_only key on !PROT_EXEC
powerpc/powernv: copy/paste - Mask SO bit in CR
powerpc: Remove core support for Marvell mv64x60 hostbridges
powerpc/boot: Remove core support for Marvell mv64x60 hostbridges
powerpc/boot: Remove support for Marvell mv64x60 i2c controller
powerpc/boot: Remove support for Marvell MPSC serial controller
powerpc/embedded6xx: Remove C2K board support
powerpc/lib: optimise PPC32 memcmp
powerpc/lib: optimise 32 bits __clear_user()
powerpc/time: inline arch_vtime_task_switch()
powerpc/Makefile: set -mcpu=860 flag for the 8xx
powerpc: Implement csum_ipv6_magic in assembly
powerpc/32: Optimise __csum_partial()
powerpc/lib: Adjust .balign inside string functions for PPC32
...
Pull networking updates from David Miller:
1) Add Maglev hashing scheduler to IPVS, from Inju Song.
2) Lots of new TC subsystem tests from Roman Mashak.
3) Add TCP zero copy receive and fix delayed acks and autotuning with
SO_RCVLOWAT, from Eric Dumazet.
4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard
Brouer.
5) Add ttl inherit support to vxlan, from Hangbin Liu.
6) Properly separate ipv6 routes into their logically independant
components. fib6_info for the routing table, and fib6_nh for sets of
nexthops, which thus can be shared. From David Ahern.
7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP
messages from XDP programs. From Nikita V. Shirokov.
8) Lots of long overdue cleanups to the r8169 driver, from Heiner
Kallweit.
9) Add BTF ("BPF Type Format"), from Martin KaFai Lau.
10) Add traffic condition monitoring to iwlwifi, from Luca Coelho.
11) Plumb extack down into fib_rules, from Roopa Prabhu.
12) Add Flower classifier offload support to igb, from Vinicius Costa
Gomes.
13) Add UDP GSO support, from Willem de Bruijn.
14) Add documentation for eBPF helpers, from Quentin Monnet.
15) Add TLS tx offload to mlx5, from Ilya Lesokhin.
16) Allow applications to be given the number of bytes available to read
on a socket via a control message returned from recvmsg(), from
Soheil Hassas Yeganeh.
17) Add x86_32 eBPF JIT compiler, from Wang YanQing.
18) Add AF_XDP sockets, with zerocopy support infrastructure as well.
From Björn Töpel.
19) Remove indirect load support from all of the BPF JITs and handle
these operations in the verifier by translating them into native BPF
instead. From Daniel Borkmann.
20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha.
21) Allow XDP programs to do lookups in the main kernel routing tables
for forwarding. From David Ahern.
22) Allow drivers to store hardware state into an ELF section of kernel
dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy.
23) Various RACK and loss detection improvements in TCP, from Yuchung
Cheng.
24) Add TCP SACK compression, from Eric Dumazet.
25) Add User Mode Helper support and basic bpfilter infrastructure, from
Alexei Starovoitov.
26) Support ports and protocol values in RTM_GETROUTE, from Roopa
Prabhu.
27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard
Brouer.
28) Add lots of forwarding selftests, from Petr Machata.
29) Add generic network device failover driver, from Sridhar Samudrala.
* ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits)
strparser: Add __strp_unpause and use it in ktls.
rxrpc: Fix terminal retransmission connection ID to include the channel
net: hns3: Optimize PF CMDQ interrupt switching process
net: hns3: Fix for VF mailbox receiving unknown message
net: hns3: Fix for VF mailbox cannot receiving PF response
bnx2x: use the right constant
Revert "net: sched: cls: Fix offloading when ingress dev is vxlan"
net: dsa: b53: Fix for brcm tag issue in Cygnus SoC
enic: fix UDP rss bits
netdev-FAQ: clarify DaveM's position for stable backports
rtnetlink: validate attributes in do_setlink()
mlxsw: Add extack messages for port_{un, }split failures
netdevsim: Add extack error message for devlink reload
devlink: Add extack to reload and port_{un, }split operations
net: metrics: add proper netlink validation
ipmr: fix error path when ipmr_new_table fails
ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds
net: hns3: remove unused hclgevf_cfg_func_mta_filter
netfilter: provide udp*_lib_lookup for nf_tproxy
qed*: Utilize FW 8.37.2.0
...
triggers. For example:
# cd /sys/kernel/debug/tracing
# echo 'snapshot' > events/ftrace/print/trigger
# echo 'cause snapshot' > trace_marker
The rest of the changes are various clean ups and also one stable fix that
was added late in the cycle.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCWxftjBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qosyAQCgmhb+/HgRYIbsKa8Q70E2pMx5A/za
4rQ37Q9PhDUJlAD/aWXfrqcMm+buAU0yY4K+eb+f2feKXWXxdZ/fuh7+nA4=
=lpXM
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"One new feature was added to ftrace, which is the trace_marker now
supports triggers. For example:
# cd /sys/kernel/debug/tracing
# echo 'snapshot' > events/ftrace/print/trigger
# echo 'cause snapshot' > trace_marker
The rest of the changes are various clean ups and also one stable fix
that was added late in the cycle"
* tag 'trace-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (21 commits)
tracing: Use match_string() instead of open coding it in trace_set_options()
branch-check: fix long->int truncation when profiling branches
ring-buffer: Fix typo in comment
ring-buffer: Fix a bunch of typos in comments
tracing/selftest: Add test to test simple snapshot trigger for trace_marker
tracing/selftest: Add test to test hist trigger between kernel event and trace_marker
tracing/selftest: Add selftests to test trace_marker histogram triggers
ftrace/selftest: Fix reset_trigger() to handle triggers with filters
ftrace/selftest: Have the reset_trigger code be a bit more careful
tracing: Document trace_marker triggers
tracing: Allow histogram triggers to access ftrace internal events
tracing: Prevent further users of zero size static arrays in trace events
tracing: Have zero size length in filter logic be full string
tracing: Add trigger file for trace_markers tracefs/ftrace/print
tracing: Do not show filter file for ftrace internal events
tracing: Add brackets in ftrace event dynamic arrays
tracing: Have event_trace_init() called by trace_init_tracefs()
tracing: Add __find_event_file() to find event files without restrictions
tracing: Do not reference event data in post call triggers
tracepoints: Fix the descriptions of tracepoint_probe_register{_prio}
...
match_string() returns the index of an array for a matching string,
which can be used to simplify the code.
Link: http://lkml.kernel.org/r/1526546163-4609-1-git-send-email-xieyisheng1@huawei.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-06-05
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add a new BPF hook for sendmsg similar to existing hooks for bind and
connect: "This allows to override source IP (including the case when it's
set via cmsg(3)) and destination IP:port for unconnected UDP (slow path).
TCP and connected UDP (fast path) are not affected. This makes UDP support
complete, that is, connected UDP is handled by connect hooks, unconnected
by sendmsg ones.", from Andrey.
2) Rework of the AF_XDP API to allow extending it in future for type writer
model if necessary. In this mode a memory window is passed to hardware
and multiple frames might be filled into that window instead of just one
that is the case in the current fixed frame-size model. With the new
changes made this can be supported without having to add a new descriptor
format. Also, core bits for the zero-copy support for AF_XDP have been
merged as agreed upon, where i40e bits will be routed via Jeff later on.
Various improvements to documentation and sample programs included as
well, all from Björn and Magnus.
3) Given BPF's flexibility, a new program type has been added to implement
infrared decoders. Quote: "The kernel IR decoders support the most
widely used IR protocols, but there are many protocols which are not
supported. [...] There is a 'long tail' of unsupported IR protocols,
for which lircd is need to decode the IR. IR encoding is done in such
a way that some simple circuit can decode it; therefore, BPF is ideal.
[...] user-space can define a decoder in BPF, attach it to the rc
device through the lirc chardev.", from Sean.
4) Several improvements and fixes to BPF core, among others, dumping map
and prog IDs into fdinfo which is a straight forward way to correlate
BPF objects used by applications, removing an indirect call and therefore
retpoline in all map lookup/update/delete calls by invoking the callback
directly for 64 bit archs, adding a new bpf_skb_cgroup_id() BPF helper
for tc BPF programs to have an efficient way of looking up cgroup v2 id
for policy or other use cases. Fixes to make sure we zero tunnel/xfrm
state that hasn't been filled, to allow context access wrt pt_regs in
32 bit archs for tracing, and last but not least various test cases
for fixes that landed in bpf earlier, from Daniel.
5) Get rid of the ndo_xdp_flush API and extend the ndo_xdp_xmit with
a XDP_XMIT_FLUSH flag instead which allows to avoid one indirect
call as flushing is now merged directly into ndo_xdp_xmit(), from Jesper.
6) Add a new bpf_get_current_cgroup_id() helper that can be used in
tracing to retrieve the cgroup id from the current process in order
to allow for e.g. aggregation of container-level events, from Yonghong.
7) Two follow-up fixes for BTF to reject invalid input values and
related to that also two test cases for BPF kselftests, from Martin.
8) Various API improvements to the bpf_fib_lookup() helper, that is,
dropping MPLS bits which are not fully hashed out yet, rejecting
invalid helper flags, returning error for unsupported address
families as well as renaming flowlabel to flowinfo, from David.
9) Various fixes and improvements to sockmap BPF kselftests in particular
in proper error detection and data verification, from Prashant.
10) Two arm32 BPF JIT improvements. One is to fix imm range check with
regards to whether immediate fits into 24 bits, and a naming cleanup
to get functions related to rsh handling consistent to those handling
lsh, from Wang.
11) Two compile warning fixes in BPF, one for BTF and a false positive
to silent gcc in stack_map_get_build_id_offset(), from Arnd.
12) Add missing seg6.h header into tools include infrastructure in order
to fix compilation of BPF kselftests, from Mathieu.
13) Several formatting cleanups in the BPF UAPI helper description that
also fix an error during rst2man compilation, from Quentin.
14) Hide an unused variable in sk_msg_convert_ctx_access() when IPv6 is
not built into the kernel, from Yue.
15) Remove a useless double assignment in dev_map_enqueue(), from Colin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds