Support 'perf mem record' for hybrid platform. On hybrid platform,
such as Alderlake, when executing 'perf mem record', it actually calls:
record -e {cpu_core/mem-loads-aux/,cpu_core/mem-loads,ldlat=30/}:P
-e cpu_atom/mem-loads,ldlat=30/P
-e cpu_core/mem-stores/P
-e cpu_atom/mem-stores/P
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210527001610.10553-6-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Check if the mem_events ('mem-loads' and 'mem-stores') exist
in the sysfs path.
For Alderlake, the hybrid cpu pmu are "cpu_core" and "cpu_atom".
Check the existing of following paths:
/sys/devices/cpu_atom/events/mem-loads
/sys/devices/cpu_atom/events/mem-stores
/sys/devices/cpu_core/events/mem-loads
/sys/devices/cpu_core/events/mem-stores
If the patch exists, the mem_event is supported.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210527001610.10553-5-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_mem_events__name() can generate the mem-load event name.
It uses a variable 'mem_loads_name__init' to avoid generating the
event name every time (because perf_pmu__scan takes some time).
The perf_mem_events__name() assumes the pmu is "cpu" but it's not
correct for hybrid platform. For Alderlake, the pmu is "cpu_core" or
"cpu_atom"
Introduce a new parameter 'pmu_name' in perf_mem_events__name
to let the caller specify a pmu name.
Considering such event name is x86 specific, so move
perf_mem_events[] to arch/x86/util/mem-events.c.
We still keep the variable 'mem_loads_name__init' but it's only
used when pmu_name is NULL (compatible for original behavior). When
pmu_name is not NULL (e.g. "cpu_core"), this patch doesn't have
optimization. That can be implemented in follow up patch.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210527001610.10553-3-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf c2c' is also a memory profiling tool. Apply the two new data
source fields to 'perf c2c' as well.
Extend 'perf c2c' to display the number of loads which blocked by data or
address conflict.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/1612296553-21962-5-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Two new data source fields, to indicate the block reasons of a load
instruction, are introduced on the Intel Sapphire Rapids server. The
fields can be used by the memory profiling.
Add a new sort function, SORT_MEM_BLOCKED, for the two fields.
For the previous platforms or the block reason is unknown, print "N/A"
for the block reason.
Add blocked as a default mem sort key for perf report and perf mem
report.
Committer testing:
So in machines without this capability we get a "N/A" filling the new "Blocked"
column:
$ perf mem record ls
arch certs CREDITS Documentation include ipc Kconfig lib MAINTAINERS mm samples security usr block
COPYING crypto drivers fs init Kbuild kernel LICENSES Makefile net README scripts sound tools
virt
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.008 MB perf.data (17 samples) ]
$
$ perf mem report --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
# Total Lost Samples: 0
#
# Samples: 6 of event 'cpu/mem-loads,ldlat=30/Pu'
# Total weight : 1381
# Sort order : local_weight,mem,sym,dso,symbol_daddr,dso_daddr,snoop,tlb,locked,blocked
#
# Overhead Samples Local Weight Memory access Symbol Shared Object Data Symbol Data Object Snoop TLB access Locked Blocked
# ........ ....... ............ .................... ....................... ............. ...................... ............ ..... ............ ...... .......
#
32.87% 1 454 Local RAM or RAM hit [.] _dl_relocate_object ld-2.31.so [.] 0x00007fe91cef3078 libc-2.31.so Hit L1 or L2 hit No N/A
25.56% 1 353 LFB or LFB hit [.] strcmp ld-2.31.so [.] 0x00005586973855ca ls None L1 or L2 hit No N/A
22.59% 1 312 LFB or LFB hit [.] _dl_cache_libcmp ld-2.31.so [.] 0x00007fe91d0e3b18 ld.so.cache None L1 or L2 hit No N/A
8.47% 1 117 LFB or LFB hit [.] _dl_relocate_object ld-2.31.so [.] 0x00007fe91ceee570 libc-2.31.so None L1 or L2 hit No N/A
6.88% 1 95 LFB or LFB hit [.] _dl_relocate_object ld-2.31.so [.] 0x00007fe91ceed490 libc-2.31.so None L1 or L2 hit No N/A
3.62% 1 50 LFB or LFB hit [.] _dl_cache_libcmp ld-2.31.so [.] 0x00007fe91d0ebe60 ld.so.cache None L1 or L2 hit No N/A
# Samples: 11 of event 'cpu/mem-stores/Pu'
# Total weight : 11
# Sort order : local_weight,mem,sym,dso,symbol_daddr,dso_daddr,snoop,tlb,locked,blocked
#
# Overhead Samples Local Weight Memory access Symbol Shared Object Data Symbol Data Object Snoop TLB access Locked Blocked
# ........ ....... ............ ............. ....................... ............. ...................... ........... ..... .......... ...... .......
#
9.09% 1 0 L1 hit [.] __strcoll_l libc-2.31.so [.] 0x00007fffe5648fc8 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] _dl_lookup_symbol_x ld-2.31.so [.] 0x00007fffe56490b8 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] _dl_name_match_p ld-2.31.so [.] 0x00007fffe56487d8 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] _dl_start ld-2.31.so [.] start_time+0x0 ld-2.31.so N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] _dl_sysdep_start ld-2.31.so [.] 0x00007fffe56494b8 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] do_lookup_x ld-2.31.so [.] 0x00007fffe5648ff8 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] do_lookup_x ld-2.31.so [.] 0x00007fffe5649064 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] do_lookup_x ld-2.31.so [.] 0x00007fffe5649130 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 miss [.] _dl_start ld-2.31.so [.] _rtld_global+0xaf8 ld-2.31.so N/A N/A N/A N/A
9.09% 1 0 L1 miss [.] _dl_start ld-2.31.so [.] _rtld_global+0xc28 ld-2.31.so N/A N/A N/A N/A
9.09% 1 0 L1 miss [.] _dl_start ld-2.31.so [.] 0x00007fffe56495b8 [stack] N/A N/A N/A N/A
# (Tip: Show user configuration overrides: perf config --user --list)
$
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/1612296553-21962-4-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On the Intel Sapphire Rapids server, an auxiliary event has to be
enabled simultaneously with the load latency event to retrieve complete
Memory Info.
Add X86 specific perf_mem_events__name() to handle the auxiliary event.
- Users are only interested in the samples of the mem-loads event.
Sample read the auxiliary event.
- The auxiliary event must be in front of the load latency event in a
group. Assume the second event to sample if the auxiliary event is the
leader.
- Add a weak is_mem_loads_aux_event() to check the auxiliary event for
X86. For other ARCHs, it always return false.
Parse the unique event name, mem-loads-aux, for the auxiliary event.
Committer notes:
According to 61b985e3e7 ("perf/x86/intel: Add perf core PMU
support for Sapphire Rapids"), ENODATA is only returned by
sys_perf_event_open() when used with these auxiliary events, with this
in evsel__open_strerror():
case ENODATA:
return scnprintf(msg, size, "Cannot collect data source with the load latency event alone. "
"Please add an auxiliary event in front of the load latency event.");
This is Ok at this point in time, but fragile long term, I pointed this
out in the e-mail thread, requesting a follow up patch to check if
ENODATA is really for this specific case.
Fixed up sizeof(MEM_LOADS_AUX_NAME) bug pointed out by Namhyung.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210205152648.GC920417@kernel.org
Link: http://lore.kernel.org/lkml/1612296553-21962-3-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On the architectures with perf memory profiling, two types of hardware
events have been supported: load and store; if want to profile memory
for both load and store operations, the tool will use these two events
at the same time, the usage is:
# perf mem record -t load,store -- uname
But this cannot be applied for AUX tracing event, the same PMU event can
be used to only trace memory load, or only memory store, or trace for
both memory load and store.
This patch introduces a new event PERF_MEM_EVENTS__LOAD_STORE, which is
used to support the event which can record both memory load and store
operations.
When user specifies memory operation type as 'load,store', or doesn't
set type so use 'load,store' as default, if the arch supports the event
PERF_MEM_EVENTS__LOAD_STORE, the tool will convert the required
operations to this single event; otherwise, if the arch doesn't support
PERF_MEM_EVENTS__LOAD_STORE, the tool rolls back to enable both events
PERF_MEM_EVENTS__LOAD and PERF_MEM_EVENTS__STORE, which keeps the same
behaviour with before.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20201106094853.21082-4-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Different architectures might use different event or different event
parameters for memory profiling, this patch introduces a weak
perf_mem_events__ptr() function which allows to return back a
architecture specific memory event.
Since the variable 'perf_mem_events' can be only accessed by the
perf_mem_events__ptr() function, mark the variable as 'static', this
allows the architectures to define its own memory event array.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20201106094853.21082-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf tool searches a memory event name under the folder
'/sys/devices/cpu/events/', this leads to the limitation for the
selection of a memory profiling event which must be under this folder.
Thus it's impossible to use any other event as memory event which is not
under this specific folder, e.g. Arm SPE hardware event is not located
in '/sys/devices/cpu/events/' so it cannot be enabled for memory
profiling.
This patch changes to search folder from '/sys/devices/cpu/events/' to
'/sys/devices', so it give flexibility to find events which can be used
for memory profiling.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20201106094853.21082-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the event is passed as list, the default events should be listed as
per 'perf mem record -e list'. Previous behavior is:
$ perf c2c record -e list
failed: event 'list' not found, use '-e list' to get list of available events
Usage: perf c2c record [<options>] [<command>]
or: perf c2c record [<options>] -- <command> [<options>]
-e, --event <event> event selector. Use 'perf mem record -e list' to list available events
$
New behavior:
$ perf c2c record -e list
ldlat-loads : available
ldlat-stores : available
v3: is a rebase.
v2: addresses review comments by Jiri Olsa.
https://lore.kernel.org/lkml/20191127081844.GH32367@krava/
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200507220604.3391-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we pass that substructure around and with it consolidate lots of
functions that receive a (map, symbol) pair and now can receive just a
'struct map_symbol' pointer.
This further paves the way to add 'struct map_groups' to 'struct
map_symbol' so that we can have all we need for annotation so that we
can ditch 'struct map'->groups, i.e. have the map_groups pointer in a
more central place, avoiding the pointer in the 'struct map' that have
tons of instances.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-fs90ttd9q12l7989fo7pw81q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The mem_info struct goes to mem-events.h and branch_info goes to
branch.h, where they belong, this way we can remove several headers from
symbols.h and trim the include dependency tree more.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-aupw71xnravcsu2xoabfmhpc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that sort.h isn't included by any other header, we can check where
it is really needed, i.e. we can remove it and be sure that it isn't
being obtained indirectly.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-tom8k0lbsxd9joprr8zpu6w1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
PowerPC hardware does not have a builtin latency filter (--ldlat) for
the "mem-load" event and perf_mem_events by default includes
"/ldlat=30/" which is causing a failure on PowerPC. Refactor the code to
support "perf mem/c2c" on PowerPC.
This patch depends on kernel side changes done my Madhavan:
https://lists.ozlabs.org/pipermail/linuxppc-dev/2018-December/182596.html
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Dick Fowles <fowles@inreach.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20190129132412.771-1-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Skylake introduced new mem_remote bit in union perf_mem_data_src [1].
It applies to any other memory level to express Remote unknown level, as
is reported by Skylake.
Adding this extra check to c2c_decode_stats to properly decode remote
HITMs on Skylake.
[1] http://lkml.kernel.org/r/20170816222156.19953-4-andi@firstfloor.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170824085732.28481-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add decoding for the new "lvlx" and "snoopx" meminfo fields added
earlier to the kernel so that "perf mem report" and other tools can
print it properly.
v2: Merge with persistent memory patch.
Switch to new bit encoding for each combination.
v3: Switch to generic lvlnum field.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170816222156.19953-4-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf mem report' doesn't display the data source snoop indication correctly.
In the kernel API the definition is:
#define PERF_MEM_SNOOP_NONE 0x02 /* no snoop */
#define PERF_MEM_SNOOP_HIT 0x04 /* snoop hit */
#define PERF_MEM_SNOOP_MISS 0x08 /* snoop miss */
but the table used by the perf tools exchanged "Hit" and "Miss":
"None",
"Miss",
"Hit",
Fix the table in perf.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20170419174940.13641-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pave the way for further cleanups where linux/kernel.h may stop being
included in some header.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-qqxan6tfsl6qx3l0v3nwgjvk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Count total number of HITMs in a special field. This will ease up
addition of total HITM sorting into c2c report in the following patch.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1479764011-10732-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introducing c2c_add_stats function helper to cumulate c2c_stats.
Original-patch-by: Dick Fowles <rfowles@redhat.com>
Original-patch-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1474558645-19956-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introducing c2c_decode_stats function, which decodes
data_src data into new struct c2c_stats.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Original-patch-by: Dick Fowles <rfowles@redhat.com>
Original-patch-by: Don Zickus <dzickus@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1474558645-19956-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving strncat call into scnprintf to easily track number of displayed
bytes. It will be used in following patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1456303616-26926-13-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving strncat/strcpy calls into scnprintf to easily track number of
displayed bytes. It will be used in following patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1456303616-26926-12-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving strncat/strcpy calls into scnprintf to easily track number of
displayed bytes. It will be used in following patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1456303616-26926-11-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving strncat/strcpy calls into scnprintf to easily track
number of displayed bytes. It will be used in following patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1456303616-26926-10-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move meminfo's lck display function into mem-events.c object, so it
could be reused later from script code.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1456303616-26926-9-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move meminfo's snp display function into mem-events.c object, so it
could be reused later from script code.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1456303616-26926-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move meminfo's lvl display function into mem-events.c object, so it
could be reused later from script code.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1456303616-26926-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move meminfo's tlb display function into mem-events.c object, so it
could be reused later from script code.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1456303616-26926-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Wrap perf_mem_events[].name into perf_mem_events__name() so we could alter the
events name if needed.
This will be handy when changing latency settings for loads event in following
patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1456303616-26926-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Check if current kernel support available memory events and display the
status within -e list option:
$ perf mem record -e list
ldlat-loads : available
ldlat-stores : available
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1456303616-26926-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding -e option for perf mem record command, to be able to specify
memory event directly.
Get list of available events:
$ perf mem record -e list
ldlat-loads
ldlat-stores
Monitor ldlat-loads:
$ perf mem record -e ldlat-loads true
Committer notes:
Further testing:
# perf mem record -e ldlat-loads true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.020 MB perf.data (10 samples) ]
# perf evlist
cpu/mem-loads,ldlat=30/P
#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1455525293-8671-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It will ease up configuration of memory events and addition of other
memory events in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1455525293-8671-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Li Huafei