Fix the following issues:
(1) Fix writeback to reduce the size of a store operation to i_size,
effectively discarding the extra data.
The problem comes when afs_page_mkwrite() records that a page is about
to be modified by mmap(). It doesn't know what bits of the page are
going to be modified, so it records the whole page as being dirty
(this is stored in page->private as start and end offsets).
Without this, the marshalling for the store to the server extends the
size of the file to the end of the page (in afs_fs_store_data() and
yfs_fs_store_data()).
(2) Fix setattr to actually truncate the pagecache, thereby clearing
the discarded part of a file.
(3) Fix setattr to check that the new size is okay and to disable
ATTR_SIZE if i_size wouldn't change.
(4) Force i_size to be updated as the result of a truncate.
(5) Don't truncate if ATTR_SIZE is not set.
(6) Call pagecache_isize_extended() if the file was enlarged.
Note that truncate_set_size() isn't used because the setting of i_size is
done inside afs_vnode_commit_status() under the vnode->cb_lock.
Found with the generic/029 and generic/393 xfstests.
Fixes: 31143d5d51 ("AFS: implement basic file write support")
Fixes: 4343d00872 ("afs: Get rid of the afs_writeback record")
Signed-off-by: David Howells <dhowells@redhat.com>
The in-kernel afs filesystem ignores ctime because the AFS fileserver
protocol doesn't support ctimes. This, however, causes various xfstests to
fail.
Work around this by:
(1) Setting ctime to attr->ia_ctime in afs_setattr().
(2) Not ignoring ATTR_MTIME_SET, ATTR_TIMES_SET and ATTR_TOUCH settings.
(3) Setting the ctime from the server mtime when on the target file when
creating a hard link to it.
(4) Setting the ctime on directories from their revised mtimes when
renaming/moving a file.
Found by the generic/221 and generic/309 xfstests.
Signed-off-by: David Howells <dhowells@redhat.com>
Fix AFS file locking to use the correct vnode pointer and remove a member
of the afs_operation struct that is never set, but it is read and followed,
causing an oops.
This can be triggered by:
flock -s /afs/example.com/foo sleep 1
when it calls the kernel to get a file lock.
Fixes: e49c7b2f6d ("afs: Build an abstraction around an "operation" concept")
Reported-by: Dave Botsch <botsch@cnf.cornell.edu>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Dave Botsch <botsch@cnf.cornell.edu>
Adjust the fileserver rotation algorithm so that if we've tried all the
addresses on a server (cumulatively over multiple operations) until we've
run out of untried addresses, immediately reprobe all that server's
interfaces and retry the op at least once before we move onto the next
server.
Signed-off-by: David Howells <dhowells@redhat.com>
Display more information about the state of a server record, including the
flags, rtt and break counter plus the probe state for each server in
/proc/net/afs/servers.
Rearrange the server flags a bit to make them easier to read at a glance in
the proc file.
Signed-off-by: David Howells <dhowells@redhat.com>
Don't use the running state for fileserver probes to make decisions about
which server to use as the state is cleared at the start of a probe and
also intermediate values might be misleading.
Instead, add a separate 'latest known' rtt in the afs_server struct and a
flag to indicate if the server is known to be responding and update these
as and when we know what to change them to.
Signed-off-by: David Howells <dhowells@redhat.com>
Whilst it shouldn't happen, it is possible for multiple fileservers to
share a UUID, particularly if an entire cell has been duplicated, UUIDs and
all. In such a case, it's not necessarily possible to map the effect of
the CB.InitCallBackState3 incoming RPC to a specific server unambiguously
by UUID and thus to a specific cell.
Indeed, there's a problem whereby multiple server records may need to
occupy the same spot in the rb_tree rooted in the afs_net struct.
Fix this by allowing servers to form a list, with the head of the list in
the tree. When the front entry in the list is removed, the second in the
list just replaces it. afs_init_callback_state() then just goes down the
line, poking each server in the list.
This means that some servers will be unnecessarily poked, unfortunately.
An alternative would be to route by call parameters.
Reported-by: Jeffrey Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Fixes: d2ddc776a4 ("afs: Overhaul volume and server record caching and fileserver rotation")
Reorganise afs_volume objects such that they're in a tree keyed on volume
ID, rooted at on an afs_cell object rather than being in multiple trees,
each of which is rooted on an afs_server object.
afs_server structs become per-cell and acquire a pointer to the cell.
The process of breaking a callback then starts with finding the server by
its network address, following that to the cell and then looking up each
volume ID in the volume tree.
This is simpler than the afs_vol_interest/afs_cb_interest N:M mapping web
and allows those structs and the code for maintaining them to be simplified
or removed.
It does make a couple of things a bit more tricky, though:
(1) Operations now start with a volume, not a server, so there can be more
than one answer as to whether or not the server we'll end up using
supports the FS.InlineBulkStatus RPC.
(2) CB RPC operations that specify the server UUID. There's still a tree
of servers by UUID on the afs_net struct, but the UUIDs in it aren't
guaranteed unique.
Signed-off-by: David Howells <dhowells@redhat.com>
Put in the first phase of cell alias detection. This part handles alias
detection for cells that have root.cell volumes (which is expected to be
likely).
When a cell becomes newly active, it is probed for its root.cell volume,
and if it has one, this volume is compared against other root.cell volumes
to find out if the list of fileserver UUIDs have any in common - and if
that's the case, do the address lists of those fileservers have any
addresses in common. If they do, the new cell is adjudged to be an alias
of the old cell and the old cell is used instead.
Comparing is aided by the server list in struct afs_server_list being
sorted in UUID order and the addresses in the fileserver address lists
being sorted in address order.
The cell then retains the afs_volume object for the root.cell volume, even
if it's not mounted for future alias checking.
This necessary because:
(1) Whilst fileservers have UUIDs that are meant to be globally unique, in
practice they are not because cells get cloned without changing the
UUIDs - so afs_server records need to be per cell.
(2) Sometimes the DNS is used to make cell aliases - but if we don't know
they're the same, we may end up with multiple superblocks and multiple
afs_server records for the same thing, impairing our ability to
deliver callback notifications of third party changes
(3) The fileserver RPC API doesn't contain the cell name, so it can't tell
us which cell it's notifying and can't see that a change made to to
one cell should notify the same client that's also accessed as the
other cell.
Reported-by: Jeffrey Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Implement client support for the YFSVL.GetCellName RPC operation by which
YFS permits the canonical cell name to be queried from a VL server.
Signed-off-by: David Howells <dhowells@redhat.com>
Save more bits from the volume location database record obtained for a
server so that we can use this information in cell alias detection.
Signed-off-by: David Howells <dhowells@redhat.com>
Don't get the epoch from a server, particularly one that we're looking up
by UUID, as UUIDs may be ambiguous and may map to more than one server - so
we can't draw any conclusions from it.
Reported-by: Jeffrey Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Turn the afs_operation struct into the main way that most fileserver
operations are managed. Various things are added to the struct, including
the following:
(1) All the parameters and results of the relevant operations are moved
into it, removing corresponding fields from the afs_call struct.
afs_call gets a pointer to the op.
(2) The target volume is made the main focus of the operation, rather than
the target vnode(s), and a bunch of op->vnode->volume are made
op->volume instead.
(3) Two vnode records are defined (op->file[]) for the vnode(s) involved
in most operations. The vnode record (struct afs_vnode_param)
contains:
- The vnode pointer.
- The fid of the vnode to be included in the parameters or that was
returned in the reply (eg. FS.MakeDir).
- The status and callback information that may be returned in the
reply about the vnode.
- Callback break and data version tracking for detecting
simultaneous third-parth changes.
(4) Pointers to dentries to be updated with new inodes.
(5) An operations table pointer. The table includes pointers to functions
for issuing AFS and YFS-variant RPCs, handling the success and abort
of an operation and handling post-I/O-lock local editing of a
directory.
To make this work, the following function restructuring is made:
(A) The rotation loop that issues calls to fileservers that can be found
in each function that wants to issue an RPC (such as afs_mkdir()) is
extracted out into common code, in a new file called fs_operation.c.
(B) The rotation loops, such as the one in afs_mkdir(), are replaced with
a much smaller piece of code that allocates an operation, sets the
parameters and then calls out to the common code to do the actual
work.
(C) The code for handling the success and failure of an operation are
moved into operation functions (as (5) above) and these are called
from the core code at appropriate times.
(D) The pseudo inode getting stuff used by the dynamic root code is moved
over into dynroot.c.
(E) struct afs_iget_data is absorbed into the operation struct and
afs_iget() expects to be given an op pointer and a vnode record.
(F) Point (E) doesn't work for the root dir of a volume, but we know the
FID in advance (it's always vnode 1, unique 1), so a separate inode
getter, afs_root_iget(), is provided to special-case that.
(G) The inode status init/update functions now also take an op and a vnode
record.
(H) The RPC marshalling functions now, for the most part, just take an
afs_operation struct as their only argument. All the data they need
is held there. The result delivery functions write their answers
there as well.
(I) The call is attached to the operation and then the operation core does
the waiting.
And then the new operation code is, for the moment, made to just initialise
the operation, get the appropriate vnode I/O locks and do the same rotation
loop as before.
This lays the foundation for the following changes in the future:
(*) Overhauling the rotation (again).
(*) Support for asynchronous I/O, where the fileserver rotation must be
done asynchronously also.
Signed-off-by: David Howells <dhowells@redhat.com>
As a prelude to implementing asynchronous fileserver operations in the afs
filesystem, rename struct afs_fs_cursor to afs_operation.
This struct is going to form the core of the operation management and is
going to acquire more members in later.
Signed-off-by: David Howells <dhowells@redhat.com>
Set a flag in the call struct to indicate an unmarshalling error rather
than return and handle an error from the decoding of file statuses. This
flag is checked on a successful return from the delivery function.
Signed-off-by: David Howells <dhowells@redhat.com>
afs_vol_interest objects represent the volume IDs currently being accessed
from a fileserver. These hold lists of afs_cb_interest objects that
repesent the superblocks using that volume ID on that server.
When a callback notification from the server telling of a modification by
another client arrives, the volume ID specified in the notification is
looked up in the server's afs_vol_interest list. Through the
afs_cb_interest list, the relevant superblocks can be iterated over and the
specific inode looked up and marked in each one.
Make the following efficiency improvements:
(1) Hold rcu_read_lock() over the entire processing rather than locking it
each time.
(2) Do all the callbacks for each vid together rather than individually.
Each volume then only needs to be looked up once.
(3) afs_vol_interest objects are now stored in an rb_tree rather than a
flat list to reduce the lookup step count.
(4) afs_vol_interest lookup is now done with RCU, but because it's in an
rb_tree which may rotate under us, a seqlock is used so that if it
changes during the walk, we repeat the walk with a lock held.
With this and the preceding patch which adds RCU-based lookups in the inode
cache, target volumes/vnodes can be taken without the need to take any
locks, except on the target itself.
Signed-off-by: David Howells <dhowells@redhat.com>
When an AFS client accesses a file, it receives a limited-duration callback
promise that the server will notify it if another client changes a file.
This callback duration can be a few hours in length.
If a client mounts a volume and then an application prevents it from being
unmounted, say by chdir'ing into it, but then does nothing for some time,
the rxrpc_peer record will expire and rxrpc-level keepalive will cease.
If there is NAT or a firewall between the client and the server, the route
back for the server may close after a comparatively short duration, meaning
that attempts by the server to notify the client may then bounce.
The client, however, may (so far as it knows) still have a valid unexpired
promise and will then rely on its cached data and will not see changes made
on the server by a third party until it incidentally rechecks the status or
the promise needs renewal.
To deal with this, the client needs to regularly probe the server. This
has two effects: firstly, it keeps a route open back for the server, and
secondly, it causes the server to disgorge any notifications that got
queued up because they couldn't be sent.
Fix this by adding a mechanism to emit regular probes.
Two levels of probing are made available: Under normal circumstances the
'slow' queue will be used for a fileserver - this just probes the preferred
address once every 5 mins or so; however, if server fails to respond to any
probes, the server will shift to the 'fast' queue from which all its
interfaces will be probed every 30s. When it finally responds, the record
will switch back to the slow queue.
Further notes:
(1) Probing is now no longer driven from the fileserver rotation
algorithm.
(2) Probes are dispatched to all interfaces on a fileserver when that an
afs_server object is set up to record it.
(3) The afs_server object is removed from the probe queues when we start
to probe it. afs_is_probing_server() returns true if it's not listed
- ie. it's undergoing probing.
(4) The afs_server object is added back on to the probe queue when the
final outstanding probe completes, but the probed_at time is set when
we're about to launch a probe so that it's not dependent on the probe
duration.
(5) The timer and the work item added for this must be handed a count on
net->servers_outstanding, which they hand on or release. This makes
sure that network namespace cleanup waits for them.
Fixes: d2ddc776a4 ("afs: Overhaul volume and server record caching and fileserver rotation")
Reported-by: Dave Botsch <botsch@cnf.cornell.edu>
Signed-off-by: David Howells <dhowells@redhat.com>
Split the usage count on the afs_server struct to have an active count that
registers who's actually using it separately from the reference count on
the object.
This allows a future patch to dispatch polling probes without advancing the
"unuse" time into the future each time we emit a probe, which would
otherwise prevent unused server records from expiring.
Included in this:
(1) The latter part of afs_destroy_server() in which the RCU destruction
of afs_server objects is invoked and the outstanding server count is
decremented is split out into __afs_put_server().
(2) afs_put_server() now calls __afs_put_server() rather then setting the
management timer.
(3) The calls begun by afs_fs_give_up_all_callbacks() and
afs_fs_get_capabilities() can now take a ref on the server record, so
afs_destroy_server() can just drop its ref and needn't wait for the
completion of these calls. They'll put the ref when they're done.
(4) Because of (3), afs_fs_probe_done() no longer needs to wake up
afs_destroy_server() with server->probe_outstanding.
(5) afs_gc_servers can be simplified. It only needs to check if
server->active is 0 rather than playing games with the refcount.
(6) afs_manage_servers() can propose a server for gc if usage == 0 rather
than if ref == 1. The gc is effected by (5).
Signed-off-by: David Howells <dhowells@redhat.com>
The U-version VLDB volume record retrieved by the VL.GetEntryByNameU rpc op
carries a change counter (the serverUnique field) for each fileserver
listed in the record as backing that volume. This is incremented whenever
the registration details for a fileserver change (such as its address
list). Note that the same value will be seen in all UVLDB records that
refer to that fileserver.
This should be checked before calling the VL server to re-query the address
list for a fileserver. If it's the same, there's no point doing the query.
Reported-by: Jeffrey Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
When an operation is meant to be done uninterruptibly (such as
FS.StoreData), we should not be allowing volume and server record checking
to be interrupted.
Fixes: d2ddc776a4 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: David Howells <dhowells@redhat.com>
Remove three bits:
(1) afs_server::no_epoch is neither set nor used.
(2) afs_server::have_result is set and a wakeup is applied to it, but
nothing looks at it or waits on it.
(3) afs_vl_dump_edestaddrreq() prints afs_addr_list::probed, but nothing
sets it for VL servers.
Signed-off-by: David Howells <dhowells@redhat.com>
Pull networking fixes from David Miller:
1) Fix deadlock in bpf_send_signal() from Yonghong Song.
2) Fix off by one in kTLS offload of mlx5, from Tariq Toukan.
3) Add missing locking in iwlwifi mvm code, from Avraham Stern.
4) Fix MSG_WAITALL handling in rxrpc, from David Howells.
5) Need to hold RTNL mutex in tcindex_partial_destroy_work(), from Cong
Wang.
6) Fix producer race condition in AF_PACKET, from Willem de Bruijn.
7) cls_route removes the wrong filter during change operations, from
Cong Wang.
8) Reject unrecognized request flags in ethtool netlink code, from
Michal Kubecek.
9) Need to keep MAC in reset until PHY is up in bcmgenet driver, from
Doug Berger.
10) Don't leak ct zone template in act_ct during replace, from Paul
Blakey.
11) Fix flushing of offloaded netfilter flowtable flows, also from Paul
Blakey.
12) Fix throughput drop during tx backpressure in cxgb4, from Rahul
Lakkireddy.
13) Don't let a non-NULL skb->dev leave the TCP stack, from Eric
Dumazet.
14) TCP_QUEUE_SEQ socket option has to update tp->copied_seq as well,
also from Eric Dumazet.
15) Restrict macsec to ethernet devices, from Willem de Bruijn.
16) Fix reference leak in some ethtool *_SET handlers, from Michal
Kubecek.
17) Fix accidental disabling of MSI for some r8169 chips, from Heiner
Kallweit.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (138 commits)
net: Fix CONFIG_NET_CLS_ACT=n and CONFIG_NFT_FWD_NETDEV={y, m} build
net: ena: Add PCI shutdown handler to allow safe kexec
selftests/net/forwarding: define libs as TEST_PROGS_EXTENDED
selftests/net: add missing tests to Makefile
r8169: re-enable MSI on RTL8168c
net: phy: mdio-bcm-unimac: Fix clock handling
cxgb4/ptp: pass the sign of offset delta in FW CMD
net: dsa: tag_8021q: replace dsa_8021q_remove_header with __skb_vlan_pop
net: cbs: Fix software cbs to consider packet sending time
net/mlx5e: Do not recover from a non-fatal syndrome
net/mlx5e: Fix ICOSQ recovery flow with Striding RQ
net/mlx5e: Fix missing reset of SW metadata in Striding RQ reset
net/mlx5e: Enhance ICOSQ WQE info fields
net/mlx5_core: Set IB capability mask1 to fix ib_srpt connection failure
selftests: netfilter: add nfqueue test case
netfilter: nft_fwd_netdev: allow to redirect to ifb via ingress
netfilter: nft_fwd_netdev: validate family and chain type
netfilter: nft_set_rbtree: Detect partial overlaps on insertion
netfilter: nft_set_rbtree: Introduce and use nft_rbtree_interval_start()
netfilter: nft_set_pipapo: Separate partial and complete overlap cases on insertion
...
When an AFS service handler function aborts a call, AF_RXRPC marks the call
as complete - which means that it's not going to get any more packets from
the receiver. This is a problem because reception of the final ACK is what
triggers afs_deliver_to_call() to drop the final ref on the afs_call
object.
Instead, aborted AFS service calls may then just sit around waiting for
ever or until they're displaced by a new call on the same connection
channel or a connection-level abort.
Fix this by calling afs_set_call_complete() to finalise the afs_call struct
representing the call.
However, we then need to drop the ref that stops the call from being
deallocated. We can do this in afs_set_call_complete(), as the work queue
is holding a separate ref of its own, but then we shouldn't do it in
afs_process_async_call() and afs_delete_async_call().
call->drop_ref is set to indicate that a ref needs dropping for a call and
this is dealt with when we transition a call to AFS_CALL_COMPLETE.
But then we also need to get rid of the ref that pins an asynchronous
client call. We can do this by the same mechanism, setting call->drop_ref
for an async client call too.
We can also get rid of call->incoming since nothing ever sets it and only
one thing ever checks it (futilely).
A trace of the rxrpc_call and afs_call struct ref counting looks like:
<idle>-0 [001] ..s5 164.764892: rxrpc_call: c=00000002 SEE u=3 sp=rxrpc_new_incoming_call+0x473/0xb34 a=00000000442095b5
<idle>-0 [001] .Ns5 164.766001: rxrpc_call: c=00000002 QUE u=4 sp=rxrpc_propose_ACK+0xbe/0x551 a=00000000442095b5
<idle>-0 [001] .Ns4 164.766005: rxrpc_call: c=00000002 PUT u=3 sp=rxrpc_new_incoming_call+0xa3f/0xb34 a=00000000442095b5
<idle>-0 [001] .Ns7 164.766433: afs_call: c=00000002 WAKE u=2 o=11 sp=rxrpc_notify_socket+0x196/0x33c
kworker/1:2-1810 [001] ...1 164.768409: rxrpc_call: c=00000002 SEE u=3 sp=rxrpc_process_call+0x25/0x7ae a=00000000442095b5
kworker/1:2-1810 [001] ...1 164.769439: rxrpc_tx_packet: c=00000002 e9f1a7a8:95786a88:00000008:09c5 00000001 00000000 02 22 ACK CallAck
kworker/1:2-1810 [001] ...1 164.769459: rxrpc_call: c=00000002 PUT u=2 sp=rxrpc_process_call+0x74f/0x7ae a=00000000442095b5
kworker/1:2-1810 [001] ...1 164.770794: afs_call: c=00000002 QUEUE u=3 o=12 sp=afs_deliver_to_call+0x449/0x72c
kworker/1:2-1810 [001] ...1 164.770829: afs_call: c=00000002 PUT u=2 o=12 sp=afs_process_async_call+0xdb/0x11e
kworker/1:2-1810 [001] ...2 164.771084: rxrpc_abort: c=00000002 95786a88:00000008 s=0 a=1 e=1 K-1
kworker/1:2-1810 [001] ...1 164.771461: rxrpc_tx_packet: c=00000002 e9f1a7a8:95786a88:00000008:09c5 00000002 00000000 04 00 ABORT CallAbort
kworker/1:2-1810 [001] ...1 164.771466: afs_call: c=00000002 PUT u=1 o=12 sp=SRXAFSCB_ProbeUuid+0xc1/0x106
The abort generated in SRXAFSCB_ProbeUuid(), labelled "K-1", indicates that
the local filesystem/cache manager didn't recognise the UUID as its own.
Fixes: 2067b2b3f4 ("afs: Fix the CB.ProbeUuid service handler to reply correctly")
Signed-off-by: David Howells <dhowells@redhat.com>
afs_put_addrlist() casts kfree() to rcu_callback_t. Apart from being wrong
in theory, this might also blow up when people start enforcing function
types via compiler instrumentation, and it means the rcu_head has to be
first in struct afs_addr_list.
Use kfree_rcu() instead, it's simpler and more correct.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change the name of call->iter to call->def_iter to represent the default
iterator.
Change the name of call->_iter to call->iter to represent the iterator
actually being used.
Signed-off-by: David Howells <dhowells@redhat.com>
Pull more vfs updates from Al Viro:
"A couple of misc patches"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
afs dynroot: switch to simple_dir_operations
fs/handle.c - fix up kerneldoc
Provide an RCU-capable key lookup function. We don't want to call
afs_request_key() in RCU-mode pathwalk as request_key() might sleep, even if
we don't ask it to construct anything as it might find a key that is currently
undergoing construction.
Signed-off-by: David Howells <dhowells@redhat.com>
Pull networking updates from David Miller:
"Some highlights from this development cycle:
1) Big refactoring of ipv6 route and neigh handling to support
nexthop objects configurable as units from userspace. From David
Ahern.
2) Convert explored_states in BPF verifier into a hash table,
significantly decreased state held for programs with bpf2bpf
calls, from Alexei Starovoitov.
3) Implement bpf_send_signal() helper, from Yonghong Song.
4) Various classifier enhancements to mvpp2 driver, from Maxime
Chevallier.
5) Add aRFS support to hns3 driver, from Jian Shen.
6) Fix use after free in inet frags by allocating fqdirs dynamically
and reworking how rhashtable dismantle occurs, from Eric Dumazet.
7) Add act_ctinfo packet classifier action, from Kevin
Darbyshire-Bryant.
8) Add TFO key backup infrastructure, from Jason Baron.
9) Remove several old and unused ISDN drivers, from Arnd Bergmann.
10) Add devlink notifications for flash update status to mlxsw driver,
from Jiri Pirko.
11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski.
12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes.
13) Various enhancements to ipv6 flow label handling, from Eric
Dumazet and Willem de Bruijn.
14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van
der Merwe, and others.
15) Various improvements to axienet driver including converting it to
phylink, from Robert Hancock.
16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean.
17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana
Radulescu.
18) Add devlink health reporting to mlx5, from Moshe Shemesh.
19) Convert stmmac over to phylink, from Jose Abreu.
20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from
Shalom Toledo.
21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera.
22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel.
23) Track spill/fill of constants in BPF verifier, from Alexei
Starovoitov.
24) Support bounded loops in BPF, from Alexei Starovoitov.
25) Various page_pool API fixes and improvements, from Jesper Dangaard
Brouer.
26) Just like ipv4, support ref-countless ipv6 route handling. From
Wei Wang.
27) Support VLAN offloading in aquantia driver, from Igor Russkikh.
28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy.
29) Add flower GRE encap/decap support to nfp driver, from Pieter
Jansen van Vuuren.
30) Protect against stack overflow when using act_mirred, from John
Hurley.
31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen.
32) Use page_pool API in netsec driver, Ilias Apalodimas.
33) Add Google gve network driver, from Catherine Sullivan.
34) More indirect call avoidance, from Paolo Abeni.
35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan.
36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek.
37) Add MPLS manipulation actions to TC, from John Hurley.
38) Add sending a packet to connection tracking from TC actions, and
then allow flower classifier matching on conntrack state. From
Paul Blakey.
39) Netfilter hw offload support, from Pablo Neira Ayuso"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits)
net/mlx5e: Return in default case statement in tx_post_resync_params
mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync().
net: dsa: add support for BRIDGE_MROUTER attribute
pkt_sched: Include const.h
net: netsec: remove static declaration for netsec_set_tx_de()
net: netsec: remove superfluous if statement
netfilter: nf_tables: add hardware offload support
net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload
net: flow_offload: add flow_block_cb_is_busy() and use it
net: sched: remove tcf block API
drivers: net: use flow block API
net: sched: use flow block API
net: flow_offload: add flow_block_cb_{priv, incref, decref}()
net: flow_offload: add list handling functions
net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free()
net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_*
net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND
net: flow_offload: add flow_block_cb_setup_simple()
net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC
net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC
...
-----BEGIN PGP SIGNATURE-----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=wgib
-----END PGP SIGNATURE-----
Merge tag 'afs-next-20190628' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull afs updates from David Howells:
"A set of minor changes for AFS:
- Remove an unnecessary check in afs_unlink()
- Add a tracepoint for tracking callback management
- Add a tracepoint for afs_server object usage
- Use struct_size()
- Add mappings for AFS UAE abort codes to Linux error codes, using
symbolic names rather than hex numbers in the .c file"
* tag 'afs-next-20190628' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Add support for the UAE error table
fs/afs: use struct_size() in kzalloc()
afs: Trace afs_server usage
afs: Add some callback management tracepoints
afs: afs_unlink() doesn't need to check dentry->d_inode
The new route handling in ip_mc_finish_output() from 'net' overlapped
with the new support for returning congestion notifications from BPF
programs.
In order to handle this I had to take the dev_loopback_xmit() calls
out of the switch statement.
The aquantia driver conflicts were simple overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=YTdG
-----END PGP SIGNATURE-----
Merge tag 'afs-fixes-20190620' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull AFS fixes from David Howells:
"The in-kernel AFS client has been undergoing testing on opendev.org on
one of their mirror machines. They are using AFS to hold data that is
then served via apache, and Ian Wienand had reported seeing oopses,
spontaneous machine reboots and updates to volumes going missing. This
patch series appears to have fixed the problem, very probably due to
patch (2), but it's not 100% certain.
(1) Fix the printing of the "vnode modified" warning to exclude checks
on files for which we don't have a callback promise from the
server (and so don't expect the server to tell us when it
changes).
Without this, for every file or directory for which we still have
an in-core inode that gets changed on the server, we may get a
message logged when we next look at it. This can happen in bulk
if, for instance, someone does "vos release" to update a R/O
volume from a R/W volume and a whole set of files are all changed
together.
We only really want to log a message if the file changed and the
server didn't tell us about it or we failed to track the state
internally.
(2) Fix accidental corruption of either afs_vlserver struct objects or
the the following memory locations (which could hold anything).
The issue is caused by a union that points to two different
structs in struct afs_call (to save space in the struct). The call
cleanup code assumes that it can simply call the cleanup for one
of those structs if not NULL - when it might be actually pointing
to the other struct.
This means that every Volume Location RPC op is going to corrupt
something.
(3) Fix an uninitialised spinlock. This isn't too bad, it just causes
a one-off warning if lockdep is enabled when "vos release" is
called, but the spinlock still behaves correctly.
(4) Fix the setting of i_block in the inode. This causes du, for
example, to produce incorrect results, but otherwise should not be
dangerous to the kernel"
* tag 'afs-fixes-20190620' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Fix setting of i_blocks
afs: Fix uninitialised spinlock afs_volume::cb_break_lock
afs: Fix vlserver record corruption
afs: Fix over zealous "vnode modified" warnings
Add a couple of tracepoints to track callback management:
(1) afs_cb_miss - Logs when we were unable to apply a callback, either due
to the inode being discarded or due to a competing thread applying a
callback first.
(2) afs_cb_break - Logs when we attempted to clear the noted callback
promise, either due to the server explicitly breaking the callback,
the callback promise lapsing or a local event obsoleting it.
Signed-off-by: David Howells <dhowells@redhat.com>
Fix the cb_break_lock spinlock in afs_volume struct by initialising it when
the volume record is allocated.
Also rename the lock to cb_v_break_lock to distinguish it from the lock of
the same name in the afs_server struct.
Without this, the following trace may be observed when a volume-break
callback is received:
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 2 PID: 50 Comm: kworker/2:1 Not tainted 5.2.0-rc1-fscache+ #3045
Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
Workqueue: afs SRXAFSCB_CallBack
Call Trace:
dump_stack+0x67/0x8e
register_lock_class+0x23b/0x421
? check_usage_forwards+0x13c/0x13c
__lock_acquire+0x89/0xf73
lock_acquire+0x13b/0x166
? afs_break_callbacks+0x1b2/0x3dd
_raw_write_lock+0x2c/0x36
? afs_break_callbacks+0x1b2/0x3dd
afs_break_callbacks+0x1b2/0x3dd
? trace_event_raw_event_afs_server+0x61/0xac
SRXAFSCB_CallBack+0x11f/0x16c
process_one_work+0x2c5/0x4ee
? worker_thread+0x234/0x2ac
worker_thread+0x1d8/0x2ac
? cancel_delayed_work_sync+0xf/0xf
kthread+0x11f/0x127
? kthread_park+0x76/0x76
ret_from_fork+0x24/0x30
Fixes: 68251f0a68 ("afs: Fix whole-volume callback handling")
Signed-off-by: David Howells <dhowells@redhat.com>
Because I made the afs_call struct share pointers to an afs_server object
and an afs_vlserver object to save space, afs_put_call() calls
afs_put_server() on afs_vlserver object (which is only meant for the
afs_server object) because it sees that call->server isn't NULL.
This means that the afs_vlserver object gets unpredictably and randomly
modified, depending on what config options are set (such as lockdep).
Fix this by getting rid of the union and having two non-overlapping
pointers in the afs_call struct.
Fixes: ffba718e93 ("afs: Get rid of afs_call::reply[]")
Signed-off-by: David Howells <dhowells@redhat.com>
Some ISDN files that got removed in net-next had some changes
done in mainline, take the removals.
Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells says:
I'm told that there's not really any point populating the list.
Current OpenAFS ignores it, as does AuriStor - and IBM AFS 3.6 will
do the right thing.
The list is actually useless as it's the client's view of the world,
not the servers, so if there's any NAT in the way its contents are
invalid. Further, it doesn't support IPv6 addresses.
On that basis, feel free to make it an empty list and remove all the
interface enumeration.
V1 of this patch reworked the function to use a new helper for the
ifa_list iteration to avoid sparse warnings once the proper __rcu
annotations get added in struct in_device later.
But, in light of the above, just remove afs_get_ipv4_interfaces.
Compile tested only.
Cc: David Howells <dhowells@redhat.com>
Cc: linux-afs@lists.infradead.org
Signed-off-by: Florian Westphal <fw@strlen.de>
Tested-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pass the server and volume break counts from before the status fetch
operation that queried the attributes of a file into afs_iget5_set() so
that the new vnode's break counters can be initialised appropriately.
This allows detection of a volume or server break that happened whilst we
were fetching the status or setting up the vnode.
Fixes: c435ee3455 ("afs: Overhaul the callback handling")
Signed-off-by: David Howells <dhowells@redhat.com>
Make use of the status update for the target file that the YFS.RemoveFile2
RPC op returns to correctly update the vnode as to whether the file was
actually deleted or just had nlink reduced.
Fixes: 30062bd13e ("afs: Implement YFS support in the fs client")
Signed-off-by: David Howells <dhowells@redhat.com>
Use RCU-based freeing for afs_cb_interest struct objects and use RCU on
vnode->cb_interest. Use that change to allow afs_check_validity() to use
read_seqbegin_or_lock() instead of read_seqlock_excl().
This also requires the caller of afs_check_validity() to hold the RCU read
lock across the call.
Signed-off-by: David Howells <dhowells@redhat.com>
Split afs_validate() so that the part that decides if the vnode is still
valid can be used under LOOKUP_RCU conditions from afs_d_revalidate().
Signed-off-by: David Howells <dhowells@redhat.com>
Don't save callback version and type fields as the version is about the
format of the callback information and the type is relative to the
particular RPC call.
Signed-off-by: David Howells <dhowells@redhat.com>
When applying the status and callback in the response of an operation,
apply them in the same critical section so that there's no race between
checking the callback state and checking status-dependent state (such as
the data version).
Fix this by:
(1) Allocating a joint {status,callback} record (afs_status_cb) before
calling the RPC function for each vnode for which the RPC reply
contains a status or a status plus a callback. A flag is set in the
record to indicate if a callback was actually received.
(2) These records are passed into the RPC functions to be filled in. The
afs_decode_status() and yfs_decode_status() functions are removed and
the cb_lock is no longer taken.
(3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer
update the vnode.
(4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update
the vnode.
(5) vnodes, expected data-version numbers and callback break counters
(cb_break) no longer need to be passed to the reply delivery
functions.
Note that, for the moment, the file locking functions still need
access to both the call and the vnode at the same time.
(6) afs_vnode_commit_status() is now given the cb_break value and the
expected data_version and the task of applying the status and the
callback to the vnode are now done here.
This is done under a single taking of vnode->cb_lock.
(7) afs_pages_written_back() is now called by afs_store_data() rather than
by the reply delivery function.
afs_pages_written_back() has been moved to before the call point and
is now given the first and last page numbers rather than a pointer to
the call.
(8) The indicator from YFS.RemoveFile2 as to whether the target file
actually got removed (status.abort_code == VNOVNODE) rather than
merely dropping a link is now checked in afs_unlink rather than in
xdr_decode_YFSFetchStatus().
Supplementary fixes:
(*) afs_cache_permit() now gets the caller_access mask from the
afs_status_cb object rather than picking it out of the vnode's status
record. afs_fetch_status() returns caller_access through its argument
list for this purpose also.
(*) afs_inode_init_from_status() now uses a write lock on cb_lock rather
than a read lock and now sets the callback inside the same critical
section.
Fixes: c435ee3455 ("afs: Overhaul the callback handling")
Signed-off-by: David Howells <dhowells@redhat.com>
Always ask for the reply time from AF_RXRPC as it's used to calculate the
callback expiry time and lock expiry times, so it's needed by most FS
operations.
Signed-off-by: David Howells <dhowells@redhat.com>
afs_do_lookup() will do an order-1 allocation to allocate status records if
there are more than 39 vnodes to stat.
Fix this by allocating an array of {status,callback} records for each vnode
we want to examine using vmalloc() if larger than a page.
This not only gets rid of the order-1 allocation, but makes it easier to
grow beyond 50 records for YFS servers. It also allows us to move to
{status,callback} tuples for other calls too and makes it easier to lock
across the application of the status and the callback to the vnode.
Fixes: 5cf9dd55a0 ("afs: Prospectively look up extra files when doing a single lookup")
Signed-off-by: David Howells <dhowells@redhat.com>
Replace the afs_call::reply[] array with a bunch of typed members so that
the compiler can use type-checking on them. It's also easier for the eye
to see what's going on.
Signed-off-by: David Howells <dhowells@redhat.com>
Make certain RPC operations non-interruptible, including:
(*) Set attributes
(*) Store data
We don't want to get interrupted during a flush on close, flush on
unlock, writeback or an inode update, leaving us in a state where we
still need to do the writeback or update.
(*) Extend lock
(*) Release lock
We don't want to get lock extension interrupted as the file locks on
the server are time-limited. Interruption during lock release is less
of an issue since the lock is time-limited, but it's better to
complete the release to avoid a several-minute wait to recover it.
*Setting* the lock isn't a problem if it's interrupted since we can
just return to the user and tell them they were interrupted - at
which point they can elect to retry.
(*) Silly unlink
We want to remove silly unlink files if we can, rather than leaving
them for the salvager to clear up.
Note that whilst these calls are no longer interruptible, they do have
timeouts on them, so if the server stops responding the call will fail with
something like ETIME or ECONNRESET.
Without this, the following:
kAFS: Unexpected error from FS.StoreData -512
appears in dmesg when a pending store data gets interrupted and some
processes may just hang.
Additionally, make the code that checks/updates the server record ignore
failure due to interruption if the main call is uninterruptible and if the
server has an address list. The next op will check it again since the
expiration time on the old list has past.
Fixes: d2ddc776a4 ("afs: Overhaul volume and server record caching and fileserver rotation")
Reported-by: Jonathan Billings <jsbillings@jsbillings.org>
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
If an older AFS server doesn't support an operation, it may accept the call
and then sit on it forever, happily responding to pings that make kafs
think that the call is still alive.
Fix this by setting the maximum lifespan of Volume Location service calls
in particular and probe calls in general so that they don't run on
endlessly if they're not supported.
Signed-off-by: David Howells <dhowells@redhat.com>
Currently, once configured, AFS cells are looked up in the DNS at regular
intervals - which is a waste of resources if those cells aren't being
used. It also leads to a problem where cells preloaded, but not
configured, before the network is brought up end up effectively statically
configured with no VL servers and are unable to get any.
Fix this by not doing the DNS lookup until the first time a cell is
touched. It is waited for if we don't have any cached records yet,
otherwise the DNS lookup to maintain the record is done in the background.
This has the downside that the first time you touch a cell, you now have to
wait for the upcall to do the required DNS lookups rather than them already
being cached.
Further, the record is not replaced if the old record has at least one
server in it and the new record doesn't have any.
Fixes: 0a5143f2f8 ("afs: Implement VL server rotation")
Signed-off-by: David Howells <dhowells@redhat.com>
afs_xattr_get_yfs() tries to free yacl, which may hold an error value (say
if yfs_fs_fetch_opaque_acl() failed and returned an error).
Fix this by allocating yacl up front (since it's a fixed-length struct,
unlike afs_acl) and passing it in to the RPC function. This also allows
the flags to be placed in the object rather than passing them through to
the RPC function.
Fixes: ae46578b96 ("afs: Get YFS ACLs and information through xattrs")
Signed-off-by: David Howells <dhowells@redhat.com>
Implement the setting of YFS ACLs in AFS through the interface of setting
the afs.yfs.acl extended attribute on the file.
Signed-off-by: David Howells <dhowells@redhat.com>
The YFS/AuriStor variant of AFS provides more capable ACLs and provides
per-volume ACLs and per-file ACLs as well as per-directory ACLs. It also
provides some extra information that can be retrieved through four ACLs:
(1) afs.yfs.acl
The YFS file ACL (not the same format as afs.acl).
(2) afs.yfs.vol_acl
The YFS volume ACL.
(3) afs.yfs.acl_inherited
"1" if a file's ACL is inherited from its parent directory, "0"
otherwise.
(4) afs.yfs.acl_num_cleaned
The number of of ACEs removed from the ACL by the server because the
PT entries were removed from the PTS database (ie. the subject is no
longer known).
Signed-off-by: David Howells <dhowells@redhat.com>
Implements the setting of ACLs in AFS by means of setting the
afs.acl extended attribute on the file.
Signed-off-by: Joe Gorse <jhgorse@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Implement an xattr on AFS files called "afs.acl" that retrieves a file's
ACL. It returns the raw AFS3 ACL from the result of calling FS.FetchACL,
leaving any interpretation to userspace.
Note that whilst YFS servers will respond to FS.FetchACL, this will render
a more-advanced YFS ACL down. Use "afs.yfs.acl" instead for that.
Signed-off-by: David Howells <dhowells@redhat.com>
Log more information when "kAFS: AFS vnode with undefined type\n" is
displayed due to a vnode record being retrieved from the server that
appears to have a duff file type (usually 0). This prints more information
to try and help pin down the problem.
Signed-off-by: David Howells <dhowells@redhat.com>
Provide byte-range file locking emulation that can be configured at mount
time to one of four modes:
(1) flock=local. Locking is done locally only and no reference is made to
the server.
(2) flock=openafs. Byte-range locking is done locally only; whole-file
locking is done with reference to the server. Whole-file locks cannot
be upgraded unless the client holds an exclusive lock.
(3) flock=strict. Byte-range and whole-file locking both require a
sufficient whole-file lock on the server.
(4) flock=write. As strict, but the client always gets an exclusive
whole-file lock on the server.
Signed-off-by: David Howells <dhowells@redhat.com>
Implement sillyrename for AFS unlink and rename, using the NFS variant
implementation as a basis.
Note that the asynchronous file locking extender/releaser has to be
notified with a state change to stop it complaining if there's a race
between that and the actual file deletion.
A tracepoint, afs_silly_rename, is also added to note the silly rename and
the cleanup. The afs_edit_dir tracepoint is given some extra reason
indicators and the afs_flock_ev tracepoint is given a silly-delete file
lock cancellation indicator.
Signed-off-by: David Howells <dhowells@redhat.com>
Holding a file lock on an AFS file does not prevent it from being deleted
on the server, so we need to handle an error resulting from that when we
try setting, extending or releasing a lock.
Fix this by adding a "deleted" lock state and cancelling the lock extension
process for that file and aborting all waiters for the lock.
Fixes: 0fafdc9f88 ("afs: Fix file locking")
Reported-by: Jonathan Billings <jsbillin@umich.edu>
Signed-off-by: David Howells <dhowells@redhat.com>
Record the timestamp on the first reply DATA packet received in response to
a set- or extend-lock operation, then use this to calculate the time
remaining till the lock expires rather than using whatever time the
requesting process wakes up and finishes processing the operation as a
base.
Signed-off-by: David Howells <dhowells@redhat.com>
Split the call to afs_wait_for_call_to_complete() from afs_make_call() to
make it easier to handle asynchronous calls and to make it easier to
convert a synchronous call to an asynchronous one in future, for instance
when someone tries to interrupt an operation by pressing Ctrl-C.
Signed-off-by: David Howells <dhowells@redhat.com>
The in-kernel afs filesystem client counts the number of server-level
callback invalidation events (CB.InitCallBackState* RPC operations) that it
receives from the server. This is stored in cb_s_break in various
structures, including afs_server and afs_vnode.
If an inode is examined by afs_validate(), say, the afs_server copy is
compared, along with other break counters, to those in afs_vnode, and if
one or more of the counters do not match, it is considered that the
server's callback promise is broken. At points where this happens,
AFS_VNODE_CB_PROMISED is cleared to indicate that the status must be
refetched from the server.
afs_validate() issues an FS.FetchStatus operation to get updated metadata -
and based on the updated data_version may invalidate the pagecache too.
However, the break counters are also used to determine whether to note a
new callback in the vnode (which would set the AFS_VNODE_CB_PROMISED flag)
and whether to cache the permit data included in the YFSFetchStatus record
by the server.
The problem comes when the server sends us a CB.InitCallBackState op. The
first such instance doesn't cause cb_s_break to be incremented, but rather
causes AFS_SERVER_FL_NEW to be cleared - but thereafter, say some hours
after last use and all the volumes have been automatically unmounted and
the server has forgotten about the client[*], this *will* likely cause an
increment.
[*] There are other circumstances too, such as the server restarting or
needing to make space in its callback table.
Note that the server won't send us a CB.InitCallBackState op until we talk
to it again.
So what happens is:
(1) A mount for a new volume is attempted, a inode is created for the root
vnode and vnode->cb_s_break and AFS_VNODE_CB_PROMISED aren't set
immediately, as we don't have a nominated server to talk to yet - and
we may iterate through a few to find one.
(2) Before the operation happens, afs_fetch_status(), say, notes in the
cursor (fc.cb_break) the break counter sum from the vnode, volume and
server counters, but the server->cb_s_break is currently 0.
(3) We send FS.FetchStatus to the server. The server sends us back
CB.InitCallBackState. We increment server->cb_s_break.
(4) Our FS.FetchStatus completes. The reply includes a callback record.
(5) xdr_decode_AFSCallBack()/xdr_decode_YFSCallBack() check to see whether
the callback promise was broken by checking the break counter sum from
step (2) against the current sum.
This fails because of step (3), so we don't set the callback record
and, importantly, don't set AFS_VNODE_CB_PROMISED on the vnode.
This does not preclude the syscall from progressing, and we don't loop here
rechecking the status, but rather assume it's good enough for one round
only and will need to be rechecked next time.
(6) afs_validate() it triggered on the vnode, probably called from
d_revalidate() checking the parent directory.
(7) afs_validate() notes that AFS_VNODE_CB_PROMISED isn't set, so doesn't
update vnode->cb_s_break and assumes the vnode to be invalid.
(8) afs_validate() needs to calls afs_fetch_status(). Go back to step (2)
and repeat, every time the vnode is validated.
This primarily affects volume root dir vnodes. Everything subsequent to
those inherit an already incremented cb_s_break upon mounting.
The issue is that we assume that the callback record and the cached permit
information in a reply from the server can't be trusted after getting a
server break - but this is wrong since the server makes sure things are
done in the right order, holding up our ops if necessary[*].
[*] There is an extremely unlikely scenario where a reply from before the
CB.InitCallBackState could get its delivery deferred till after - at
which point we think we have a promise when we don't. This, however,
requires unlucky mass packet loss to one call.
AFS_SERVER_FL_NEW tries to paper over the cracks for the initial mount from
a server we've never contacted before, but this should be unnecessary.
It's also further insulated from the problem on an initial mount by
querying the server first with FS.GetCapabilities, which triggers the
CB.InitCallBackState.
Fix this by
(1) Remove AFS_SERVER_FL_NEW.
(2) In afs_calc_vnode_cb_break(), don't include cb_s_break in the
calculation.
(3) In afs_cb_is_broken(), don't include cb_s_break in the check.
Signed-off-by: David Howells <dhowells@redhat.com>
Alter the AFS automounting code to create and modify an fs_context struct
when parameterising a new mount triggered by an AFS mountpoint rather than
constructing device name and option strings.
Also remove the cell=, vol= and rwpath options as they are then redundant.
The reason they existed is because the 'device name' may be derived
literally from a mountpoint object in the filesystem, so default cell and
parent-type information needed to be passed in by some other method from
the automount routines. The vol= option didn't end up being used.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Eric W. Biederman <ebiederm@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add fs_context support to the AFS filesystem, converting the parameter
parsing to store options there.
This will form the basis for namespace propagation over mountpoints within
the AFS model, thereby allowing AFS to be used in containers more easily.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
kAFS can be given certain network errors (EADDRNOTAVAIL, EHOSTDOWN and
ERFKILL) that it doesn't handle in its server/address rotation algorithms.
They cause the probing and rotation to abort immediately rather than
rotating.
Fix this by:
(1) Abstracting out the error prioritisation from the VL and FS rotation
algorithms into a common function and expand usage into the server
probing code.
When multiple errors are available, this code selects the one we'd
prefer to return.
(2) Add handling for EADDRNOTAVAIL, EHOSTDOWN and ERFKILL.
Fixes: 0fafdc9f88 ("afs: Fix file locking")
Fixes: 0338747d8454 ("afs: Probe multiple fileservers simultaneously")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Send probes to all the unprobed fileservers in a fileserver list on all
addresses simultaneously in an attempt to find out the fastest route whilst
not getting stuck for 20s on any server or address that we don't get a
reply from.
This alleviates the problem whereby attempting to access a new server can
take a long time because the rotation algorithm ends up rotating through
all servers and addresses until it finds one that responds.
Signed-off-by: David Howells <dhowells@redhat.com>
In some circumstances, the callback interest pointer is NULL, so in such a
case we can't dereference it when checking to see if the callback is
broken. This causes an oops in some circumstances.
Fix this by replacing the function that worked out the aggregate break
counter with one that actually does the comparison, and then make that
return true (ie. broken) if there is no callback interest as yet (ie. the
pointer is NULL).
Fixes: 68251f0a68 ("afs: Fix whole-volume callback handling")
Signed-off-by: David Howells <dhowells@redhat.com>
Eliminate the address pointer from the address list cursor as it's
redundant (ac->addrs[ac->index] can be used to find the same address) and
address lists must be replaced rather than being rearranged, so is of
limited value.
Signed-off-by: David Howells <dhowells@redhat.com>
Provide an option to allow the file or volume location server cursor to be
dumped if the rotation routine falls off the end without managing to
contact a server.
Signed-off-by: David Howells <dhowells@redhat.com>
Implement support for talking to YFS-variant fileservers in the cache
manager and the filesystem client. These implement upgraded services on
the same port as their AFS services.
YFS fileservers provide expanded capabilities over AFS.
Signed-off-by: David Howells <dhowells@redhat.com>
Calculate the callback expiration time at the point of operation reply
delivery, using the reply time queried from AF_RXRPC on that call as a
base.
Signed-off-by: David Howells <dhowells@redhat.com>
Track VL servers as independent entities rather than lumping all their
addresses together into one set and implement server-level rotation by:
(1) Add the concept of a VL server list, where each server has its own
separate address list. This code is similar to the FS server list.
(2) Use the DNS resolver to retrieve a set of servers and their associated
addresses, ports, preference and weight ratings.
(3) In the case of a legacy DNS resolver or an address list given directly
through /proc/net/afs/cells, create a list containing just a dummy
server record and attach all the addresses to that.
(4) Implement a simple rotation policy, for the moment ignoring the
priorities and weights assigned to the servers.
(5) Show the address list through /proc/net/afs/<cell>/vlservers. This
also displays the source and status of the data as indicated by the
upcall.
Signed-off-by: David Howells <dhowells@redhat.com>
Improve the error handling in FS server rotation by:
(1) Cache the latest useful error value for the fs operation as a whole in
struct afs_fs_cursor separately from the error cached in the
afs_addr_cursor struct. The one in the address cursor gets clobbered
occasionally. Copy over the error to the fs operation only when it's
something we'd be interested in passing to userspace.
(2) Make it so that EDESTADDRREQ is the default that is seen only if no
addresses are available to be accessed.
(3) When calling utility functions, such as checking a volume status or
probing a fileserver, don't let a successful result clobber the cached
error in the cursor; instead, stash the result in a temporary variable
until it has been assessed.
(4) Don't return ETIMEDOUT or ETIME if a better error, such as
ENETUNREACH, is already cached.
(5) On leaving the rotation loop, turn any remote abort code into a more
useful error than ECONNABORTED.
Fixes: d2ddc776a4 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: David Howells <dhowells@redhat.com>
afs_extract_data sets up a temporary iov_iter and passes it to AF_RXRPC
each time it is called to describe the remaining buffer to be filled.
Instead:
(1) Put an iterator in the afs_call struct.
(2) Set the iterator for each marshalling stage to load data into the
appropriate places. A number of convenience functions are provided to
this end (eg. afs_extract_to_buf()).
This iterator is then passed to afs_extract_data().
(3) Use the new ITER_DISCARD iterator to discard any excess data provided
by FetchData.
Signed-off-by: David Howells <dhowells@redhat.com>
Include the site of detection of AFS protocol errors in trace lines to
better be able to determine what went wrong.
Signed-off-by: David Howells <dhowells@redhat.com>
Conflicts were easy to resolve using immediate context mostly,
except the cls_u32.c one where I simply too the entire HEAD
chunk.
Signed-off-by: David S. Miller <davem@davemloft.net>
Access to the list of cells by /proc/net/afs/cells has a couple of
problems:
(1) It should be checking against SEQ_START_TOKEN for the keying the
header line.
(2) It's only holding the RCU read lock, so it can't just walk over the
list without following the proper RCU methods.
Fix these by using an hlist instead of an ordinary list and using the
appropriate accessor functions to follow it with RCU.
Since the code that adds a cell to the list must also necessarily change,
sort the list on insertion whilst we're at it.
Fixes: 989782dcdc ("afs: Overhaul cell database management")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Note the maximum allocated capacity in an afs_addr_list struct and discard
addresses that would exceed it in afs_merge_fs_addr{4,6}().
Also, since the current maximum capacity is less than 255, reduce the
relevant members to bytes.
Signed-off-by: David Howells <dhowells@redhat.com>
Use new return type vm_fault_t for fault handler in struct
vm_operations_struct. For now, this is just documenting that the
function returns a VM_FAULT value rather than an errno. Once all
instances are converted, vm_fault_t will become a distinct type.
See 1c8f422059 ("mm: change return type to vm_fault_t") for reference.
Link: http://lkml.kernel.org/r/20180702152017.GA3780@jordon-HP-15-Notebook-PC
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
At the moment, afs_break_callbacks calls afs_break_one_callback() for each
separate FID it was given, and the latter looks up the volume individually
for each one.
However, this is inefficient if two or more FIDs have the same vid as we
could reuse the volume. This is complicated by cell aliasing whereby we
may have multiple cells sharing a volume and can therefore have multiple
callback interests for any particular volume ID.
At the moment afs_break_one_callback() scans the entire list of volumes
we're getting from a server and breaks the appropriate callback in every
matching volume, regardless of cell. This scan is done for every FID.
Optimise callback breaking by the following means:
(1) Sort the FID list by vid so that all FIDs belonging to the same volume
are clumped together.
This is done through the use of an indirection table as we cannot do
an insertion sort on the afs_callback_break array as we decode FIDs
into it as we subsequently also have to decode callback info into it
that corresponds by array index only.
We also don't really want to bubblesort afterwards if we can avoid it.
(2) Sort the server->cb_interests array by vid so that all the matching
volumes are grouped together. This permits the scan to stop after
finding a record that has a higher vid.
(3) When breaking FIDs, we try to keep server->cb_break_lock as long as
possible, caching the start point in the array for that volume group
as long as possible.
It might make sense to add another layer in that list and have a
refcounted volume ID anchor that has the matching interests attached
to it rather than being in the list. This would allow the lock to be
dropped without losing the cursor.
Signed-off-by: David Howells <dhowells@redhat.com>
Alter the dynroot mount so that cells created by manipulation of
/proc/fs/afs/cells and /proc/fs/afs/rootcell and by specification of a root
cell as a module parameter will cause directories for those cells to be
created in the dynamic root superblock for the network namespace[*].
To this end:
(1) Only one dynamic root superblock is now created per network namespace
and this is shared between all attempts to mount it. This makes it
easier to find the superblock to modify.
(2) When a dynamic root superblock is created, the list of cells is walked
and directories created for each cell already defined.
(3) When a new cell is added, if a dynamic root superblock exists, a
directory is created for it.
(4) When a cell is destroyed, the directory is removed.
(5) These directories are created by calling lookup_one_len() on the root
dir which automatically creates them if they don't exist.
[*] Inasmuch as network namespaces are currently supported here.
Signed-off-by: David Howells <dhowells@redhat.com>
The AFS filesystem depends at the moment on /proc for configuration and
also presents information that way - however, this causes a compilation
failure if procfs is disabled.
Fix it so that the procfs bits aren't compiled in if procfs is disabled.
This means that you can't configure the AFS filesystem directly, but it is
still usable provided that an up-to-date keyutils is installed to look up
cells by SRV or AFSDB DNS records.
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
-----BEGIN PGP SIGNATURE-----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=1ow3
-----END PGP SIGNATURE-----
Merge tag 'afs-fixes-20180514' into afs-proc
backmerge AFS fixes that went into mainline and deal with
the conflict in fs/afs/fsclient.c
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Implement network namespacing within AFS, but don't yet let mounts occur
outside the init namespace. An additional patch will be required propagate
the network namespace across automounts.
Signed-off-by: David Howells <dhowells@redhat.com>
The afs_net::ws_cell member is sometimes used under RCU conditions from
within an seq-readlock. It isn't, however, marked __rcu and it isn't set
using the proper RCU barrier-imposing functions.
Fix this by annotating it with __rcu and using appropriate barriers to
make sure accesses are correctly ordered.
Without this, the code can produce the following warning:
>> fs/afs/proc.c:151:24: sparse: incompatible types in comparison expression (different address spaces)
Fixes: f044c8847b ("afs: Lay the groundwork for supporting network namespaces")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
It's possible for an AFS file server to issue a whole-volume notification
that callbacks on all the vnodes in the file have been broken. This is
done for R/O and backup volumes (which don't have per-file callbacks) and
for things like a volume being taken offline.
Fix callback handling to detect whole-volume notifications, to track it
across operations and to check it during inode validation.
Fixes: c435ee3455 ("afs: Overhaul the callback handling")
Signed-off-by: David Howells <dhowells@redhat.com>
The refcounting on afs_cb_interest struct objects in
afs_register_server_cb_interest() is wrong as it uses the server list
entry's call back interest pointer without regard for the fact that it
might be replaced at any time and the object thrown away.
Fix this by:
(1) Put a lock on the afs_server_list struct that can be used to
mediate access to the callback interest pointers in the servers array.
(2) Keep a ref on the callback interest that we get from the entry.
(3) Dropping the old reference held by vnode->cb_interest if we replace
the pointer.
Fixes: c435ee3455 ("afs: Overhaul the callback handling")
Signed-off-by: David Howells <dhowells@redhat.com>
When a server record is destroyed, we want to send a message to the server
telling it that we're giving up all the callbacks it has promised us.
Apply two fixes to this:
(1) Only send the FS.GiveUpAllCallBacks message if we actually got a
callback from that server. We assume this to be the case if we
performed at least one successful FS operation on that server.
(2) Send it to the address last used for that server rather than always
picking the first address in the list (which might be unreachable).
Fixes: d2ddc776a4 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: David Howells <dhowells@redhat.com>
The afs directory loading code (primarily afs_read_dir()) locks all the
pages that hold a directory's content blob to defend against
getdents/getdents races and getdents/lookup races where the competitors
issue conflicting reads on the same data. As the reads will complete
consecutively, they may retrieve different versions of the data and
one may overwrite the data that the other is busy parsing.
Fix this by not locking the pages at all, but rather by turning the
validation lock into an rwsem and getting an exclusive lock on it whilst
reading the data or validating the attributes and a shared lock whilst
parsing the data. Sharing the attribute validation lock should be fine as
the data fetch will retrieve the attributes also.
The individual page locks aren't needed at all as the only place they're
being used is to serialise data loading.
Without this patch, the:
if (!test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags)) {
...
}
part of afs_read_dir() may be skipped, leaving the pages unlocked when we
hit the success: clause - in which case we try to unlock the not-locked
pages, leading to the following oops:
page:ffffe38b405b4300 count:3 mapcount:0 mapping:ffff98156c83a978 index:0x0
flags: 0xfffe000001004(referenced|private)
raw: 000fffe000001004 ffff98156c83a978 0000000000000000 00000003ffffffff
raw: dead000000000100 dead000000000200 0000000000000001 ffff98156b27c000
page dumped because: VM_BUG_ON_PAGE(!PageLocked(page))
page->mem_cgroup:ffff98156b27c000
------------[ cut here ]------------
kernel BUG at mm/filemap.c:1205!
...
RIP: 0010:unlock_page+0x43/0x50
...
Call Trace:
afs_dir_iterate+0x789/0x8f0 [kafs]
? _cond_resched+0x15/0x30
? kmem_cache_alloc_trace+0x166/0x1d0
? afs_do_lookup+0x69/0x490 [kafs]
? afs_do_lookup+0x101/0x490 [kafs]
? key_default_cmp+0x20/0x20
? request_key+0x3c/0x80
? afs_lookup+0xf1/0x340 [kafs]
? __lookup_slow+0x97/0x150
? lookup_slow+0x35/0x50
? walk_component+0x1bf/0x490
? path_lookupat.isra.52+0x75/0x200
? filename_lookup.part.66+0xa0/0x170
? afs_end_vnode_operation+0x41/0x60 [kafs]
? __check_object_size+0x9c/0x171
? strncpy_from_user+0x4a/0x170
? vfs_statx+0x73/0xe0
? __do_sys_newlstat+0x39/0x70
? __x64_sys_getdents+0xc9/0x140
? __x64_sys_getdents+0x140/0x140
? do_syscall_64+0x5b/0x160
? entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: f3ddee8dc4 ("afs: Fix directory handling")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Processes like ld that do lots of small writes that aren't necessarily
contiguous result in a lot of small StoreData operations to the server, the
idea being that if someone else changes the data on the server, we only
write our changes over that and not the space between. Further, we don't
want to write back empty space if we can avoid it to make it easier for the
server to do sparse files.
However, making lots of tiny RPC ops is a lot less efficient for the server
than one big one because each op requires allocation of resources and the
taking of locks, so we want to compromise a bit.
Reduce the load by the following:
(1) If a file is just created locally or has just been truncated with
O_TRUNC locally, allow subsequent writes to the file to be merged with
intervening space if that space doesn't cross an entire intervening
page.
(2) Don't flush the file on ->flush() but rather on ->release() if the
file was open for writing.
Just linking vmlinux.o, without this patch, looking in /proc/fs/afs/stats:
file-wr : n=441 nb=513581204
and after the patch:
file-wr : n=62 nb=513668555
there were 379 fewer StoreData RPC operations at the expense of an extra
87K being written.
Signed-off-by: David Howells <dhowells@redhat.com>
Add statistics to /proc/fs/afs/stats for data transfer RPC operations. New
lines are added that look like:
file-rd : n=55794 nb=10252282150
file-wr : n=9789 nb=3247763645
where n= indicates the number of ops completed and nb= indicates the number
of bytes successfully transferred. file-rd is the counts for read/fetch
operations and file-wr the counts for write/store operations.
Note that directory and symlink downloading are included in the file-rd
stats at the moment.
Signed-off-by: David Howells <dhowells@redhat.com>
Locally edit the contents of an AFS directory upon a successful inode
operation that modifies that directory (such as mkdir, create and unlink)
so that we can avoid the current practice of re-downloading the directory
after each change.
This is viable provided that the directory version number we get back from
the modifying RPC op is exactly incremented by 1 from what we had
previously. The data in the directory contents is in a defined format that
we have to parse locally to perform lookups and readdir, so modifying isn't
a problem.
If the edit fails, we just clear the VALID flag on the directory and it
will be reloaded next time it is needed.
Signed-off-by: David Howells <dhowells@redhat.com>
AFS directories are structured blobs that are downloaded just like files
and then parsed by the lookup and readdir code and, as such, are currently
handled in the pagecache like any other file, with the entire directory
content being thrown away each time the directory changes.
However, since the blob is a known structure and since the data version
counter on a directory increases by exactly one for each change committed
to that directory, we can actually edit the directory locally rather than
fetching it from the server after each locally-induced change.
What we can't do, though, is mix data from the server and data from the
client since the server is technically at liberty to rearrange or compress
a directory if it sees fit, provided it updates the data version number
when it does so and breaks the callback (ie. sends a notification).
Further, lookup with lookup-ahead, readdir and, when it arrives, local
editing are likely want to scan the whole of a directory.
So directory handling needs to be improved to maintain the coherency of the
directory blob prior to permitting local directory editing.
To this end:
(1) If any directory page gets discarded, invalidate and reread the entire
directory.
(2) If readpage notes that if when it fetches a single page that the
version number has changed, the entire directory is flagged for
invalidation.
(3) Read as much of the directory in one go as we can.
Note that this removes local caching of directories in fscache for the
moment as we can't pass the pages to fscache_read_or_alloc_pages() since
page->lru is in use by the LRU.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells