Add default handler for non-jump instructions. This really only has an
effect on instructions that compute a PC-relative address, such as
'adrp,' as seen in these couple of examples:
BEFORE: adrp x0, ffff20000aa11000 <kallsyms_token_index+0xce000>
AFTER: adrp x0, kallsyms_token_index+0xce000
BEFORE: adrp x23, ffff20000ae94000 <__per_cpu_load>
AFTER: adrp x23, __per_cpu_load
The implementation is identical to that of s390, but with a slight
adjustment for objdump whitespace propagation (arm64 objdump puts spaces
after commas, whereas s390's presumably doesn't).
The mov__scnprintf() declaration is moved from s390's to arm64's
instructions.c because arm64's gets included before s390's.
Committer testing:
Ran 'perf annotate --stdio2 > /tmp/{before,after}' no diff.
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20180827150807.304110d2e9919a17c832ca48@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add initial support for s390 auxiliary traces using the CPU-Measurement
Sampling Facility.
Support and ignore PERF_REPORT_AUXTRACE_INFO records in the perf data
file. Later patches will show the contents of the auxiliary traces.
Setup the auxtrace queues and data structures for s390. A raw dump of
the perf.data file now does not show an error when an auxtrace event is
encountered.
Output before:
[root@s35lp76 perf]# ./perf report -D -i perf.data.auxtrace
0x128 [0x10]: failed to process type: 70
Error:
failed to process sample
0x128 [0x10]: event: 70
.
. ... raw event: size 16 bytes
. 0000: 00 00 00 46 00 00 00 10 00 00 00 00 00 00 00 00 ...F............
0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 0
[root@s35lp76 perf]#
Output after:
# ./perf report -D -i perf.data.auxtrace |fgrep PERF_RECORD_AUXTRACE
0 0 0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 5
0 0 0x25a66 [0x30]: PERF_RECORD_AUXTRACE size: 0x40000
offset: 0 ref: 0 idx: 4 tid: -1 cpu: 4
....
Additional notes about the underlying hardware and software
implementation, provided by Hendrik Brueckner (see Link: below).
=============================================================================
The CPU-Measurement Facility (CPU-MF) provides a set of functions to obtain
performance information on the mainframe. Basically, it was introduced
with System z10 years ago for the z/Architecture, that means, 64-bit.
For Linux, there are two facilities of interest, counter facility and sampling
facility. The counter facility provides hardware counters for instructions,
cycles, crypto-activities, and many more.
The sampling facility is a hardware sampler that when started will write
samples at a particular interval into a sampling buffer. At some point,
for example, if a sample block is full, it generates an interrupt to collect
samples (while the sampler continues to run).
Few years ago, I started to provide the a perf PMU to use the counter
and sampling facilities. Recently, the device driver was updated to also
"export" the sampling buffer into the AUX area. Thomas now completed the
related perf work to interpret and process these AUX data.
If people are more interested in the sampling facility, they can have a
look into:
- The Load-Program-Parameter and the CPU-Measurement Facilities, SA23-2260-05
http://www-01.ibm.com/support/docview.wss?uid=isg26fcd1cc32246f4c8852574ce0044734a
and to learn how-to use it for Linux on Z, have look at chapter 54,
"Using the CPU-measurement facilities" in the:
- Device Drivers, Features, and Commands, SC33-8411-34
http://public.dhe.ibm.com/software/dw/linux390/docu/l416dd34.pdf
=============================================================================
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180803100758.GA28475@linux.ibm.com
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180802074622.13641-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With commit eca0fa28cd ("perf record: Provide detailed information on
s390 CPU") s390 platform provides detailed type/model/capacity
information in the CPU identifier string instead of just "IBM/S390".
This breaks 'perf kvm' support which uses hard coded string IBM/S390 to
compare with the CPU identifier string. Fix this by changing the
comparison.
Reported-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Tested-by: Stefan Raspl <raspl@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: stable@vger.kernel.org
Fixes: eca0fa28cd ("perf record: Provide detailed information on s390 CPU")
Link: http://lkml.kernel.org/r/20180712070936.67547-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Command 'perf record' calls:
cmd_report()
record__auxtrace_init()
auxtrace_record__init()
On s390 function auxtrace_record__init() returns random return value due
to missing initialization.
This sometime causes 'perf record' to exit immediately without error
message and creating a perf.data file.
Fix this by setting error the return code to zero before returning from
platform specific functions which may not set the error code in call
cases.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180423142940.21143-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make the type field in pmu-events/arch/s390/mapfile.cvs more generic to
match the created cpuid string for s390.
The pattern also checks for the counter first version number and counter
second version number ([13]\.[1-5]) and the authorization field which
follows.
These numbers do not exist in the cpuid identification string when perf
commands are executed on a z/VM environment (which does not support CPU
counter measurement facility).
CPUID string for LPAR:
cpuid : IBM,3906,704,M03,3.5,002f
CPUID string for z/VM:
cpuid : IBM,2964,702,N96
This allows the removal of s390 specific cpuid compare code and uses the
common compare function with its regular expression matching algorithm.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180423081745.3672-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need that to figure out if jumps have targets in a different
function.
E.g. _cpp_lex_token(), in /usr/libexec/gcc/x86_64-redhat-linux/5.3.1/cc1
has a line like this:
jne c469be <cpp_named_operator2name@@Base+0xa72>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-ris0ioziyp469pofpzix2atb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
S390 has several load and store instructions with target operand
addressing relative to the program counter, for example lrl, lgrl, strl,
stgrl.
These instructions are handled similar to x86. Objdump output displays
those instructions as:
9595c: c4 2d 00 09 9c 54 lgrl %r7,1c8540 <mp_+0x60>
This output is parsed (like on x86) and perf annotate shows those lines
as:
lgrl %r7,mp_+0x60
This patch handles the s390 specific instruction parsing for PC relative
load and store instructions.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180308120913.14802-1-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf annotate' displays function call assembler instructions with a
right arrow. Hitting enter on this line/instruction causes the browser
to disassemble this target function and show it on the screen. On s390
this results in an error message 'The called function was not found.'
The function call assembly line parsing does not handle the s390 bras
and brasl instructions. Function call__parse expects the target as first
operand:
callq e9140 <__fxstat>
S390 has a register number as first operand:
brasl %r14,41d60 <abort>
Therefore the target addresses on s390 are always zero which is an
invalid address.
Introduce a s390 specific call parsing function which skips the first
operand on s390.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180307134325.96106-1-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit eca0fa28cd (perf record: Provide detailed information on s390
CPU") fixed a build error on Ubuntu. However the fix uses the wrong
size to print the model information.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Fixes: eca0fa28cd ("perf record: Provide detailed information on s390 CPU")
Link: http://lkml.kernel.org/r/20180219102444.96900-1-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The function get_cpuid_str() is called by perf_pmu__getcpuid() and on
s390 returns a complete description of the CPU and its capabilities,
which is a comma separated list.
To map the CPU type with the value defined in the
pmu-events/arch/s390/mapfile.csv, introduce an architecture specific
cpuid compare function named strcmp_cpuid_str()
The currently used regex algorithm is defined as the weak default and
will be used if no platform specific one is defined. This matches the
current behavior.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180213151419.80737-3-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Scan the cpuid string and extract the type number for later use.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180213151419.80737-2-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When perf record ... is setup to record data, the s390 cpu information
was a fixed string "IBM/S390".
Replace this string with one containing more information about the
machine. The information included in the cpuid is a comma separated
list:
manufacturer,type,model-capacity,model[,version,authorization]
with
- manufacturer: up to 16 byte name of the manufacturer (IBM).
- type: a four digit number refering to the machine
generation.
- model-capacitiy: up to 16 characters describing number
of cpus etc.
- model: up to 16 characters describing model.
- version: the CPU-MF counter facility version number,
available on LPARs only, omitted on z/VM guests.
- authorization: the CPU-MF counter facility authorization level,
available on LPARs only, omitted on z/VM guests.
Before:
[root@s8360047 perf]# ./perf record -- sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.001 MB perf.data (4 samples) ]
[root@s8360047 perf]# ./perf report --header | fgrep cpuid
# cpuid : IBM/S390
[root@s8360047 perf]#
After:
[root@s35lp76 perf]# ./perf report --header|fgrep cpuid
# cpuid : IBM,3906,704,M03,3.5,002f
[root@s35lp76 perf]#
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180213151419.80737-1-tmricht@linux.vnet.ibm.com
[ Use scnprintf instead of strncat to fix build errors on gcc GNU C99 5.4.0 20160609 -march=zEC12 -m64 -mzarch -ggdb3 -O6 -std=gnu99 -fPIC -fno-omit-frame-pointer -funwind-tables -fstack-protector-all ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Long ago we decided to be verbotten including files in the kernel git
sources from tools/ living source code, to avoid disturbing kernel
development (and perf's and other tools/) when, say, a kernel hacker
adds something, tests everything but tools/ and have tools/ build
broken.
This got broken recently by s/390, fix it by copying
arch/s390/include/uapi/asm/perf_regs.h to tools/arch/s390/include/uapi/asm/,
making this one be used by means of <asm/perf_regs.h> and updating
tools/perf/check_headers.sh to make sure we are notified when the
original changes, so that we can check if anything is needed on the
tooling side.
This would have been caught by the 'tarkpg' test entry in:
$ make -C tools/perf build-test
When run on a s/390 build system or container.
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: f704ef4460 ("s390/perf: add support for perf_regs and libdw")
Link: https://lkml.kernel.org/n/tip-n57139ic0v9uffx8wdqi3d8a@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The regs_query_register_offset() helper function converts
register name like "%r0" to an offset of a register in user_pt_regs
It is required by the BPF prologue generator.
The user_pt_regs structure was recently added to "asm/ptrace.h".
Hence, update tools/perf/check-headers.sh to keep the header file
in sync with kernel changes.
Suggested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-and-tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch fixes a bug introduced with commit d9f8dfa9ba ("perf
annotate s390: Implement jump types for perf annotate").
'perf annotate' displays annotated assembler output by reading output of
command objdump and parsing the disassembled lines. For each shown
mnemonic this function sequence is executed:
disasm_line__new()
|
+--> disasm_line__init_ins()
|
+--> ins__find()
|
+--> arch->associate_instruction_ops()
The s390x specific function assigned to function pointer
associate_instruction_ops refers to function s390__associate_ins_ops().
This function checks for supported mnemonics and assigns a NULL pointer
to unsupported mnemonics. However even the NULL pointer is added to the
architecture dependend instruction array.
This leads to an extremely large architecture instruction array
(due to array resize logic in function arch__grow_instructions()).
Depending on the objdump output being parsed the array can end up
with several ten-thousand elements.
This patch checks if a mnemonic is supported and only adds supported
ones into the architecture instruction array. The array does not contain
elements with NULL pointers anymore.
Before the patch (With some debug printf output):
[root@s35lp76 perf]# time ./perf annotate --stdio > /tmp/xxxbb
real 8m49.679s
user 7m13.008s
sys 0m1.649s
[root@s35lp76 perf]# fgrep '__ins__find sorted:1 nr_instructions:'
/tmp/xxxbb | tail -1
__ins__find sorted:1 nr_instructions:87433 ins:0x341583c0
[root@s35lp76 perf]#
The number of different s390x branch/jump/call/return instructions
entered into the array is 87433.
After the patch (With some printf debug output:)
[root@s35lp76 perf]# time ./perf annotate --stdio > /tmp/xxxaa
real 1m24.553s
user 0m0.587s
sys 0m1.530s
[root@s35lp76 perf]# fgrep '__ins__find sorted:1 nr_instructions:'
/tmp/xxxaa | tail -1
__ins__find sorted:1 nr_instructions:56 ins:0x3f406570
[root@s35lp76 perf]#
The number of different s390x branch/jump/call/return instructions
entered into the array is 56 which is sensible.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Acked-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20171124094637.55558-1-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For correct unwinding of user space processes, the floating-point
register contents are required. For example, leaf functions might
use fp registers to temporarily store the return address.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-and-tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Instead of defining DWARF register to string table in dwarf-regs-table.h
and dwarf-regs.c, use a common table in dwarf-regs-table.h.
Ensure that the DWARF register table is up-to-date with
http://refspecs.linuxfoundation.org/ELF/zSeries/lzsabi0_s390/x1542.html.
For unwinding with libdw, also ensure to correctly setup the DWARF
register frame according to the register mappings. Currently, libdw
supports up to 32 registers only.
Suggested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-and-tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
With support for perf_regs and libdw, you can record and report
call graphs for user space programs. Simply invoke perf with
the --call-graph=dwarf command line option.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
[brueckner: added dwfl_thread_state_register_pc() call]
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-and-tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Perf tool need implement a callback to enable using AUX buffer. Perf
will do another mmap() to trigger the setup of AUX buffer in kernel
if there is such callback. The default size of the AUX buffer is set
properly according to the sampling frequency to avoid overflow. It
could also be manually set by -m option of perf.
The interface of perf is not changed. Diagnostic mode sampling
could be started by `perf record -e rBD000` like before.
Signed-off-by: Pu Hou <bjhoupu@linux.vnet.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's no need for extra cpuid_parse arch callback, it can be handled
directly in init callback.
Adding the init function to x86 to cover the cpuid initialization.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171011150158.11895-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On s390x perf test 1 failed. It turned out that commit cf6383f73c
("perf report: Fix kernel symbol adjustment for s390x") was incorrect.
The previous implementation in dso__load_sym() is also suitable for
s390x.
Therefore this patch undoes commit cf6383f73c
Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Cc: Zvonko Kosic <zvonko.kosic@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Fixes: cf6383f73c ("perf report: Fix kernel symbol adjustment for s390x")
LPU-Reference: 20170915071404.58398-2-tmricht@linux.vnet.ibm.com
Link: http://lkml.kernel.org/n/tip-v101o8k25vuja2ogosgf15yy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On s390x perf test 1 failed. It turned out that commit 4a084ecfc8
("perf report: Fix module symbol adjustment for s390x") was incorrect.
The previous implementation in dso__load_sym() is also suitable for
s390x.
Therefore this patch undoes commit 4a084ecfc8.
Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Zvonko Kosic <zvonko.kosic@de.ibm.com>
Fixes: 4a084ecfc8 ("perf report: Fix module symbol adjustment for s390x")
LPU-Reference: 20170915071404.58398-1-tmricht@linux.vnet.ibm.com
Link: http://lkml.kernel.org/n/tip-5ani7ly57zji7s0hmzkx416l@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf report' tool does not display the addresses of kernel module
symbols correctly.
For example symbol qeth_send_ipa_cmd in kernel module qeth.ko has this
relative address for function qeth_send_ipa_cmd():
[root@s8360047 linux]# nm -g drivers/s390/net/qeth.ko | fgrep send_ipa_cmd
0000000000013088 T qeth_send_ipa_cmd
The module is loaded at address:
[root@s8360047 linux]# cat /sys/module/qeth/sections/.text
0x000003ff80296d20
[root@s8360047 linux]#
This should result in a start address of:
0x13088 + 0x3ff80296d20 = 0x3ff802a9da8
Using crash to verify the address on a live system:
[root@s8360046 linux]# crash vmlinux
crash 7.1.9++
Copyright (C) 2002-2016 Red Hat, Inc.
Copyright (C) 2004, 2005, 2006, 2010 IBM Corporation
[...]
crash> mod -s qeth drivers/s390/net/qeth.ko
MODULE NAME SIZE OBJECT FILE
3ff8028d700 qeth 151552 drivers/s390/net/qeth.ko
crash> sym qeth_send_ipa_cmd
3ff802a9da8 (T) qeth_send_ipa_cmd [qeth] /root/linux/drivers/s390/net/qeth_core_main.c: 2944
crash>
Now perf report displays the address of symbol qeth_send_ipa_cmd:
symbol__new:
qeth_send_ipa_cmd 0x130f0-0x132ce
There is a difference of 0x68 between the entry in the symbol table (see
nm command above) and perf. The difference is from the offset the .text
segment of qeth.ko:
[root@s8360047 perf]# readelf -a drivers/s390/net/qeth.ko
Section Headers:
[Nr] Name Type Address Offset
Size EntSize Flags Link Info Align
[ 0] NULL 0000000000000000 00000000
0000000000000000 0000000000000000 0 0 0
[ 1] .note.gnu.build-i NOTE 0000000000000000 00000040
0000000000000024 0000000000000000 A 0 0 4
[ 2] .text PROGBITS 0000000000000000 00000068
000000000001c8a0 0000000000000000 AX 0 0 8
As seen the .text segment has an offset of 0x68 with start address 0x0.
Therefore 0x68 is added to the address of qeth_send_ipa_cmd and thus
0x13088 + 0x68 = 0x130f0 is displayed.
This is wrong, perf report needs to display the start address of symbol
qeth_send_ipa_cmd at 0x13088 + qeth.ko.text section start address.
The qeth.ko module .text start address is available in the qeth.ko DSO
map. Just identify the kernel module symbols and correct the addresses.
With the fix I see this correct address for symbol: symbol__new:
qeth_send_ipa_cmd 0x3ff802a9da8-0x3ff802a9f86
Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Cc: Zvonko Kosic <zvonko.kosic@de.ibm.com>
LPU-Reference: 20170803134902.47207-1-tmricht@linux.vnet.ibm.com
Link: http://lkml.kernel.org/n/tip-q8lktlpoxb5e3dj52u1s1rw4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On s390x the kernel text segment starts at address 0x0. When perf
report reads kernel symbols from vmlinux file it adds an offset of
0x1000.
For example see symbol set_reset_devices:
[root@s8360047 linux-devel]# nm -A vmlinux| fgrep set_reset_devices
vmlinux:0000000001379000 t set_reset_devices
[root@s8360047 linux-devel]#
[root@s8360047 linux-devel]# fgrep set_reset_devices /proc/kallsyms
0000000001379000 t set_reset_devices
[root@s8360047 linux-devel]#
The kernel symbol table and the vmlinux file have the same address for
symbol set_reset_devices namely 1379000.
When perf report reads this symbols it displays it with address
symbol__new: set_reset_devices 0x137a000-0x137a018
There is a difference between perf report and vmlinux of 0x1000.
The reason for the difference is at kernel symbol load time in function
dso__load_sym(). The vmlinux file is investigated with its ELF header.
Command readelf shows this:
Section Headers:
[Nr] Name Type Address Offset
Size EntSize Flags Link Info Align
[ 0] NULL 0000000000000000 00000000
0000000000000000 0000000000000000 0 0 0
[ 1] .text PROGBITS 0000000000000000 00001000
0000000000b0e0c2 0000000000000000 AX 0 0 128
This leads to an invalid calculation of the symbol start address, see
file utit/symbol-elf.c line 974:
/* Adjust symbol to map to file offset */
if (adjust_kernel_syms)
sym.st_value -= shdr.sh_addr - shdr.sh_offset;
With shdr.sh_addr set to 0x0 and shdr.sh_offset set to 0x1000 as read
from the ELF .text section 0x1000 is added to the symbol address.
I would like to fix this by introducing an archticture specific function
named elf__needs_adjust_symbols(). This is the same approach as done by
PowerPC. The function currently does not exist for s390x and the
default weak one is used. The s390x specific one returns false when
symsrc_init() is invoked for kernel symbols and results in variable
adjust_kernel_syms being false. This omits the adjustment and the
correct address is displayed (when symbol resolvement does not work).
The s390x specific function returns false for kernel symbol adjustment
and returns true for kernel modules, processes and shared libraries.
Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
LPU-Reference: 20170713130252.6167-1-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Removing it from util.h, part of an effort to disentangle the includes
hell, that makes changes to util.h or something included by it to cause
a complete rebuild of the tools.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ztrjy52q1rqcchuy3rubfgt2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Implement simple detection for all kind of jumps and branches.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Andreas Krebbel <krebbel@linux.vnet.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-s390 <linux-s390@vger.kernel.org>
Cc: stable@kernel.org # v4.10+
Link: http://lkml.kernel.org/r/1491465112-45819-3-git-send-email-borntraeger@de.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support probing on offline cross-architecture binary by adding getting
the target machine arch from ELF and choose correct register string for
the machine.
Here is an example:
-----
$ perf probe --vmlinux=./vmlinux-arm --definition 'do_sys_open $params'
p:probe/do_sys_open do_sys_open+0 dfd=%r5:s32 filename=%r1:u32 flags=%r6:s32 mode=%r3:u16
-----
Here, we can get probe/do_sys_open from above and append it to to the target
machine's tracing/kprobe_events file in the tracefs mountput, usually
/sys/kernel/debug/tracing/kprobe_events (or /sys/kernel/tracing/kprobe_events).
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/147214229717.23638.6440579792548044658.stgit@devbox
[ Add definition for EM_AARCH64 to fix the build on at least centos 6, debian 7 & ubuntu 12.04.5 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
At present, when creating module's map, perf gets 'start' address by
parsing '/proc/modules', but it's the module base address, it isn't the
start address of the '.text' section.
In most arches, it's OK. But for s390, it places 'GOT' and 'PLT'
relocations before '.text' section. So there exists an offset between
module base address and '.text' section, which will incur wrong symbol
resolution for modules.
Fix this bug by getting 'start' address of module's map from parsing
'/sys/module/[module name]/sections/.text', not from '/proc/modules'.
Signed-off-by: Song Shan Gong <gongss@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1469070651-6447-2-git-send-email-gongss@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch removes the "const" qualifier from kvm_events_tp declaration
to account for the fact that some architectures may need to update this
variable dynamically. For instance, powerpc will need to update this
variable dynamically depending on the machine type.
Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1453962787-15376-2-git-send-email-hemant@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Its better to remove the dependency on uapi/kvm_perf.h to allow dynamic
discovery of kvm events (if its needed). To do this, some extern
variables have been introduced with which we can keep the generic
functions generic.
Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com>
Acked-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1453962787-15376-1-git-send-email-hemant@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the s390 arch objects building under build framework to be included
in the libperf build object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-8f5tlfwegkirhir2ffz8nw3i@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the x86 arch objects building under build framework to be included
in the libperf build object.
Adding also arch/$(ARCH)/Build files for the rest of the archs. The
reason for this is that in arch/Build we now do:
+libperf-y += $(ARCH)/
which would make the build to fail on other architectures, because the
build framework requires 'Build' file in nested directories and this
patch adds it only for x86.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-5enob06z07m7ew6nzzdmp3n2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On s390, the vmexit event has a tree-like structure: between
exit_event_begin and exit_event_end several other events may happen and
with each of them refining the previous ones.
This patch adds a decoder for such events to the generic code and also
the files <asm/kvm_perf.h> and kvm-stat.c for s390.
Commands 'perf kvm stat record', 'report' and 'live' are supported.
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1404397747-20939-5-git-send-email-yarygin@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch defines CPUINFO_PROC for s390 and implements get_cpuid().
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/87ioneo7qh.wl%yarygin@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Including libio.h causes build failures on uClibc systems (which lack
libio.h).
It appears that libio.h was only included to pull in a definition for
NULL, so it has been replaced by stddef.h.
On powerpc, libio.h was conditionally included, but could be removed
completely as it is unneeded. Also, the included of stdlib.h was changed
to stddef.h (as again, only NULL is needed).
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1363300074-26288-1-git-send-email-cody@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Kim Phillips