Recent gcc versions emit warnings when unsigned variables are
compared < 0 or >= 0.
Signed-off-by: Bill Nottingham <notting@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current IPSEC rule resolution behavior we have does not work for a
lot of people, even though technically it's an improvement from the
-EAGAIN buisness we had before.
Right now we'll block until the key manager resolves the route. That
works for simple cases, but many folks would rather packets get
silently dropped until the key manager resolves the IPSEC rules.
We can't tell these folks to "set the socket non-blocking" because
they don't have control over the non-block setting of things like the
sockets used to resolve DNS deep inside of the resolver libraries in
libc.
With that in mind I coded up the patch below with some help from
Herbert Xu which provides packet-drop behavior during larval state
resolution, controllable via sysctl and off by default.
This lays the framework to either:
1) Make this default at some point or...
2) Move this logic into xfrm{4,6}_policy.c and implement the
ARP-like resolution queue we've all been dreaming of.
The idea would be to queue packets to the policy, then
once the larval state is resolved by the key manager we
re-resolve the route and push the packets out. The
packets would timeout if the rule didn't get resolved
in a certain amount of time.
Signed-off-by: David S. Miller <davem@davemloft.net>
Use menuconfigs instead of menus, so the whole menu can be disabled at
once instead of going through all options.
Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
SPIN_LOCK_UNLOCKED cleanup,use __SPIN_LOCK_UNLOCKED instead
Signed-off-by: Milind Arun Choudhary <milindchoudhary@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This prints the value of the parsed Elapsed Time when received via a
Timestamp Echo option [RFC 4342, 13.3].
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes an error in the calculation of t_ipi when X converges towards
very low sending rates (between 1 and 64 bytes per second).
Although this case may not sound likely, it can be reproduced by connecting,
hitting enter (1 byte sent) and waiting for some time, during which the
nofeedback timer halves the sending rate until finally it reaches the region
1..64 bytes/sec. Computing X is handled correctly (tested separately); but by
dividing X _before_ entering the calculation of t_ipi, X becomes zero as
a result. This in turn triggers a BUG condition caught in scaled_div().
Fixed by replacing with equivalent statement and explicit typecast for good
measure.
Calculation verified and effect of patch tested - reduced never below 1 byte
per 64 seconds afterwards, i.e. not allowing divide-by-zero.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The patch follows the following recommendation made in an erratum to RFC 4342:
"Senders MAY additionally make use of other available RTT measurements,
including those from the initial Request-Response packet exchange."
It implements larger initial windows with regard to this inital RTT measurement,
using the mechanism suggested in draft-ietf-dccp-rfc3448bis, section 4.2.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This replaces the existing occurrences of RTT sampling with
the use of the new function dccp_sample_rtt.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A recurring problem, in particular in the CCID code, is that RTT samples
from packets with timestamp echo and elapsed time options need to be taken.
This service is provided via a new function dccp_sample_rtt in this patch.
Furthermore, to protect against `insane' RTT samples, the sampled value
is bounded between 100 microseconds and 4 seconds - for which u32 is sufficient.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The CCID 3 and TFRC specs (RFC 4342, RFC 3448, draft-3448bis) make frequent
reference to the computation of the RFC-3390 initial sending rate:
1. Initial sending rate when RTT is known (RFC 4342, p. 6)
2. Response to Idle/Application-Limited periods (RFC 4342, 5.1)
This warrants putting the code into its own function, for later code reuse.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This clears the following sparc64 build warnings:
1) warning: format "%ld" expects type "long int", but argument 3 has type "suseconds_t"
2) warning: format "%llu" expects type "long long unsigned int", but argument 3 has type "__u64"
Fixed by using typecast to unsigned. This is argued to be safe, since the quantities, after
de-scaling (factor 2^6) fit all in u32.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds a few more fields of interest to /proc/net/dccpprobe, the following output ensues:
1 2 3 4 5 6 7 8 9 10 11
sec.usec src:sport dst:dport size s rtt p X_calc X_recv X t_ipi
Also made the formatting consistent.
Scripts that go with this can be downloaded from http://139.133.210.30/users/gerrit/dccp/dccp_probe/
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds more detail in the wait_for_ccid packet scheduling loop.
In particular, it informs about (i) when delay is used and (ii) why
a packet is discarded.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently debugging output (when configured) is automatically enabled when
DCCP modules are compiled into the kernel rather than built as loadable modules.
This is not necessary, since the module parameters in this case become kernel
commandline parameters, e.g. DCCP or CCID3 debug output can be enabled for a
static build by appending the following at the boot prompt:
dccp.dccp_debug=1 dccp_ccid3.ccid3_debug=1
This patch therefore does away with the more complicated way of always enabling
debug output for static builds
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This:
1. removes a race condition in the access to the scheduled send time t_nom which
results from allowing asynchronous r/w access to t_nom without locks;
2. updates the inter-packet interval t_ipi = s/X when `s' changes, following a
suggestion by Ian McDonald.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds a few debugging statements to ccid3.c
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes a bug which uses an invalid comparison.
The bug resulted in the use of invalid loss intervals.
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Acked-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This improves the slow-start phase by using the MSS
(as suggested in RFC 4342, sec. 5) instead of the packet size s.
Also figured out that __u32 is ample resource enough.
After applying, I got the following in the logs:
ccid3_hc_tx_packet_recv: client(f7421700), s=6, MSS=1424, w_init=4380, R_sample=176us, X=24886363
Had the previous variant been used, w_init would have been as low as 24.
Committer note: removed unneeded cast to unsigned long long that was
causing a compiler warning on 64bit architectures.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
No code change at all.
This splits ccid3.c into a RX and a TX section, so that the file has an
organisation similar to the other ones (e.g. packet_history.{h,c}).
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since CCID3 avoids sending 0-byte data packets (cf. ccid3_hc_tx_send_packet),
testing for zero-payload length, as performed by ccid3_hc_tx_update_s, is
redundant - hence removed by this patch.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This removes two ambiguities in employing the new definition of before48,
following the analysis on http://www.mail-archive.com/dccp@vger.kernel.org/msg01295.html
(1) Updating GSR when P.seqno >= S.SWL
With the old definition we did not update when P.seqno and S.SWL are 2^47 apart. To
ensure the same behaviour as with the old definition, this is replaced with the
equivalent condition dccp_delta_seqno(S.SWL, P.seqno) >= 0
(2) Sending SYNC when P.seqno >= S.OSR
Here it is debatable whether the new definition causes an ambiguity: the case is
similar to (1); and to have consistency with the case (1), we use the equivalent
condition dccp_delta_seqno(S.OSR, P.seqno) >= 0
Detailed Justification
The follows48 relation identifies whether 48-bit sequence number
x is the direct successor of y. Currently, it does not handle cases
of the following type correctly:
follows48(0x(prefix)10000LL, 0x(prefix)0FFFFLL)
where prefix is an arbitrary hex sequence of up to 7 digits.
This is fixed by reusing the new dccp_delta_seqno function.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch
* organizes the sequence arithmetic functions into one corner of dccp.h
* performs a small modification of dccp_set_seqno to make it more widely reusable
(now it is safe to use any number, since it performs modulo-2^48 assignment)
* adds functions and generic macros for 48-bit sequence arithmetic:
--48 bit complement
--modulo-48 addition and modulo-48 subtraction
--dccp_inc_seqno now a special case of add48
Constants renamed following a suggestion by Arnaldo.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now the skb->nh union has just one member, .raw, i.e. it is just like the
skb->mac union, strange, no? I'm just leaving it like that till the transport
layer is done with, when we'll rename skb->mac.raw to skb->mac_header (or
->mac_header_offset?), ditto for ->{h,nh}.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For the places where we need a pointer to the network header, it is still legal
to touch skb->nh.raw directly if just adding to, subtracting from or setting it
to another layer header.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch removes the following not or no longer used exports:
- drivers/char/random.c: secure_tcp_sequence_number
- net/dccp/options.c: sysctl_dccp_feat_sequence_window
- net/netlink/af_netlink.c: netlink_set_err
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
We were only checking if there was enough space to put the int, but
left len as specified by the (malicious) user, sigh, fix it by setting
len to sizeof(val) and transfering just one int worth of data, the one
asked for.
Also check for negative len values.
Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The TX CCID needs the write_xmit_timer for delaying packet sends. Previously
this timer was only activated on active (connecting) sockets.
This patch initialises the write_xmit_timer in sync with the other timers, i.e.
the timer will be ready on any socket. This is used by applications with a
listening socket which start to stream after receiving an initiation by the
client. The write_xmit_timer is stopped when the application closes, as before.
Was tested to work and to remove the timer bug reported on dccp@vger.
Also moved timer initialisation into timer.c (static).
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts an earlier patch which disabled bidirectional mode, meaning that
a listening (passive) socket was not allowed to write to the other (active)
end of the connection.
This mode had been disabled when there were problems with CCID3, but it
imposes a constraint on socket programming and thus hinders deployment.
A change is included to ignore RX feedback received by the TX CCID3 module.
Many thanks to Andre Noll for pointing out this issue.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
This mirrors a recent change in tcp_open_req_child, whereby the icsk_rto of the
newly created child socket was not set (but rather on the parent socket). Same
fix for DCCP.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes a bug caused by a previous patch, which causes DCCP servers in
LISTEN state to not receive packets.
This patch changes the logic so that
* servers in either LISTEN or OPEN state get the RX half connection packets
* clients in OPEN state get the TX half connection packets
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The semantic effect of insert_at_head is that it would allow new registered
sysctl entries to override existing sysctl entries of the same name. Which is
pain for caching and the proc interface never implemented.
I have done an audit and discovered that none of the current users of
register_sysctl care as (excpet for directories) they do not register
duplicate sysctl entries.
So this patch simply removes the support for overriding existing entries in
the sys_sysctl interface since no one uses it or cares and it makes future
enhancments harder.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Corey Minyard <minyard@acm.org>
Cc: Neil Brown <neilb@suse.de>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Jan Kara <jack@ucw.cz>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Cc: David Chinner <dgc@sgi.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Many struct file_operations in the kernel can be "const". Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data. In addition it'll catch accidental writes at compile time to
these shared resources.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ehash table layout is currently this one :
First half of this table is used by sockets not in TIME_WAIT state
Second half of it is used by sockets in TIME_WAIT state.
This is non optimal because of for a given hash or socket, the two chain heads
are located in separate cache lines.
Moreover the locks of the second half are never used.
If instead of this halving, we use two list heads in inet_ehash_bucket instead
of only one, we probably can avoid one cache miss, and reduce ram usage,
particularly if sizeof(rwlock_t) is big (various CONFIG_DEBUG_SPINLOCK,
CONFIG_DEBUG_LOCK_ALLOC settings). So we still halves the table but we keep
together related chains to speedup lookups and socket state change.
In this patch I did not try to align struct inet_ehash_bucket, but a future
patch could try to make this structure have a convenient size (a power of two
or a multiple of L1_CACHE_SIZE).
I guess rwlock will just vanish as soon as RCU is plugged into ehash :) , so
maybe we dont need to scratch our heads to align the bucket...
Note : In case struct inet_ehash_bucket is not a power of two, we could
probably change alloc_large_system_hash() (in case it use __get_free_pages())
to free the unused space. It currently allocates a big zone, but the last
quarter of it could be freed. Again, this should be a temporary 'problem'.
Patch tested on ipv4 tcp only, but should be OK for IPV6 and DCCP.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/dccp/ccids/ccid3.c: In function `ccid3_hc_rx_packet_recv':
net/dccp/ccids/ccid3.c:1007: warning: long int format, different type arg (arg 3)
net/dccp/ccids/ccid3.c:1007: warning: long int format, different type arg (arg 4)
opaque types must be suitably cast for printing.
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Do this even for non-blocking sockets. This avoids the silly -EAGAIN
that applications can see now, even for non-blocking sockets in some
cases (f.e. connect()).
With help from Venkat Tekkirala.
Signed-off-by: David S. Miller <davem@davemloft.net>
Revert 931731123a
We can't elide the skb_set_owner_w() here because things like certain
netfilter targets (such as owner MATCH) need a socket to be set on the
SKB for correct operation.
Thanks to Jan Engelhardt and other netfilter list members for
pointing this out.
Signed-off-by: David S. Miller <davem@davemloft.net>
In a recent patch we introduced invalid return codes which will result in the
opposite of what is intended (i.e. send more packets in face of peculiar
network conditions).
This fixes it by returning ~0 which means not calculated as per
dccp_li_hist_calc_i_mean.
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
That accumulated over the last months hackaton, shame on me for not
using git-apply whitespace helping hand, will do that from now on.
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Spotted by David Miller when compiling on sparc64, I reproduced it here on
parisc64, that are the only platforms to define __kernel_suseconds_t as an
'int', all the others, x86_64 and x86 included typedef it as a 'long', but from
the definition of suseconds_t it should just be an 'int' on platforms where it
is >= 32bits, it would not require all the castings from suseconds_t to (int)
when printking variables of this type, that are not needed on parisc64 and
sparc64.
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This fixes conversion errors which arose by not properly type-casting
from u32 to __u64. Fixed by explicitly casting each type which is not
__u64, or by performing operation after assignment.
The patch further adds missing debug information to track the current
value of X_recv.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
No code change at all.
This reorders the source file to follow the same order as the corresponding
header file.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
No code change at all.
To make the header file easier to read, the following ordering is established
among the declarations:
* hist_new
* hist_delete
* hist_entry_new
* hist_head
* hist_find_entry
* hist_add_entry
* hist_entry_delete
* hist_purge
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This patch does not alter any algorithm, just the debug message format:
* s#%s, sk=%p#%s(%p)#g
* when a statename is present, it now uses %s(%p, state=%s)
* when only function entry is debugged, it adds an `- entry'
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This migrates all packet history operations into the routine
ccid3_hc_tx_packet_sent, thereby removing synchronization problems
that occur when, as before, the operations are spread over multiple
routines.
The following minor simplifications are also applied:
* several simplifications now follow from this change - several tests
are now no longer required
* removal of one unnecessary variable (dp)
Justification:
Currently packet history operations span two different routines,
one of which is likely to pass through several iterations of sleeping
and awakening.
The first routine, ccid3_hc_tx_send_packet, allocates an entry and
sets a few fields. The remaining fields are filled in when the second
routine (which is not within a sleeping context), ccid3_hc_tx_packet_sent,
is called. This has several strong drawbacks:
* it is not necessary to split history operations - all fields can be
filled in by the second routine
* the first routine is called multiple times, until a packet can be sent,
and sleeps meanwhile - this causes a lot of difficulties with regard to
keeping the list consistent
* since both routines do not have a producer-consumer like synchronization,
it is very difficult to maintain data across calls to these routines
* the fact that the routines are called in different contexts (sleeping, not
sleeping) adds further problems
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This removes the `dccphtx_ccval' field since it is nowhere used in the code and
in fact not necessary for the accounting.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This puts the window counter computation [RFC 4342, 8.1] into a separate
function which is called whenever a new packet is ready for immediate
transmission in ccid3_hc_tx_send_packet.
Justification:
The window counter update was previously computed after the packet was sent. This has
two drawbacks, both fixed by this patch:
1) re-compute another timestamp almost directly after the packet was sent (expensive),
2) the CCVal for the window counter is needed at the instant the packet is sent.
Further details:
The initialisation of the window counter is left in the state NO_SENT, as before.
The algorithm will do nothing if either RTT is initialised to 0 (which is ok) or if
the RTT value remains below 4 microseconds (which is almost pathological).
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
CCID3 performance depends much on the accuracy of RTT samples. If RTT
samples grow too large, performance can be catastrophically poor.
To limit the amount of possible damage in such cases, the patch
* introduces an upper limit which identifies a maximum `sane' RTT value;
* uses a macro to enforce this upper limit.
Using a macro was given preference, since it is necessary to identify the
calling function in the warning message. Since exceeding this threshold
identifies a critical condition, DCCP_CRIT is used and not DCCP_WARN.
Many thanks to Ian McDonald for collaboration on this issue.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
In both the sender and the receiver it is possible that the stored
RTT value is accessed before an actual RTT estimate has been computed.
This patch
* initialises the sender RTT to 0
- the sender always accesses the RTT in ccid3_hc_tx_packet_sent
- the RTT is further needed for the window counter algorithm
* replaces the receiver initialisation of 5msec with 0
- which has the same effect and removes an `XXX'
- the RTT value is needed in ccid3_hc_rx_packet_recv as rtt_prev
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
The function ccid3_hc_tx_insert_options only does a redundant no-op,
as the operation
DCCP_SKB_CB(skb)->dccpd_ccval = hctx->ccid3hctx_last_win_count;
is already performed _unconditionally_ in ccid3_hc_tx_send_packet.
Since there is further no current need for this function, it is removed
entirely. Since furthermore, there is actually no present need for the
entire interface function ccid_hc_tx_insert_options, it was decided to
remove it also, to clean up the interface.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This adds a (debug) warning message which is triggered whenever a packet is
discarded due to send failure.
It also adds a conditional, so that an interruption during dccp_wait_for_ccid
is not treated as a `BUG': the rationale is that interruptions are external,
whereas bug warnings are concerned with the internals.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This is an optimisation to reduce CPU load. The received feedback is now
only directed to the active CCID component, without requiring processing
also by the inactive one.
As a consequence, a similar test in ccid3.c is now redundant and is
also removed.
Justification:
Currently DCCP works as a unidirectional service, i.e. a listening server
is not at the same time a connecting client.
As far as I can see, several modifications are necessary until that
becomes possible.
At the present time, received feedback is both fed to the rx/tx CCID
modules. In unidirectional service, only one of these is active at any
one time.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
In migrating towards using the newer functions scaled_div/scaled_div32
for TFRC computations mapped from floating-point onto integer arithmetic,
this completes the last stage of modifications.
In particular, the overflow case for computing X_calc is circumvented by
* breaking the computation into two stages
* the first stage, res = (s*1E6)/R, cannot overflow due to use of u64
* in the second stage, res = (res*1E6)/f, overflow on u32 is avoided due
to (i) returning UINT_MAX in this case (which is logically appropriate)
and (ii) issuing a warning message into the system log (since very likely
there is a problem somewhere else with the parameters)
Lastly, all such scaling operations are now exported into tfrc.h, since
actually this form of scaled computation is specific to TFRC and not to CCID3.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Problem:
Most target types in the CCID3 code are u32, so subtle conversion errors
can occur if signed time calculations yield negative results: the original
values are lost in the conversion to unsigned, calculation errors go undetected.
This patch therefore
* sets all critical time types from unsigned to suseconds_t
* avoids comparison between signed/unsigned via type-casting
* provides ample warning messages in case time calculations are negative
These warning messages can be removed at a later stage when the code
has undergone more testing.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This simplifies the calculation of a value p for a given fval when the
first loss interval is computed (RFC 3448, 6.3.1). It makes use of the
two new functions scaled_div/scaled_div32 to provide overflow protection.
Additionally, protection against divide-by-zero is extended - in this
case the function will return the maximally possible value of p=100%.
Background:
The maximum fval, f(100%), is approximately 244, i.e. the scaled value of fval
should never exceed 244E6, which fits easily into u32. The problem is the scaling
by 10^6, since additionally R(TT) is in microseconds.
This is resolved by breaking the division into two stages: the first stage
computes fval=(s*10^6)/R, stores that into u64; the second stage computes
fval = (fval*10^6)/X_recv and complains if overflow is reached for u32.
This case is safe since the TFRC reverse-lookup routine then returns p=100%.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This replaces the remaining uses of usecs_div with scaled_div32, which
internally uses 64bit division and produces a warning on overflow.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This patch
* resolves a bug where packets smaller than 32/64 bytes resulted in sending rates of 0
* supports all sending rates from 1/64 bytes/second up to 4Gbyte/second
* simplifies the present overflow problems in calculations
Current sending rate X and the cached value X_recv of the receiver-estimated
sending rate are both scaled by 64 (2^6) in order to
* cope with low sending rates (minimally 1 byte/second)
* allow upgrading to use a packets-per-second implementation of CCID 3
* avoid calculation errors due to integer arithmetic cut-off
The patch implements a revised strategy from
http://www.mail-archive.com/dccp@vger.kernel.org/msg01040.html
The only difference with regard to that strategy is that t_ipi is already
used in the calculation of the nofeedback timeout, which saves one division.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This fixes
1) a bug in the recomputation of the sending rate by the nofeedback
timer when no feedback at all has so far been sent by the receiver:
min_t was used instead of max_t, which is wrong (cf. RFC 3448, p. 10);
2) an error in the computation of larger initial windows: instead of
min(... max()) (cf. RFC 4342, 5.), the code had used max(... max()).
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This performs two optimisations for the recomputation of the sending rate.
1) Currently the target sending rate X_calc is recalculated whenever
a) the nofeedback timer expires, or
b) a feedback packet is received.
In the (a) case, recomputing X_calc is redundant, since
* the parameters p and RTT do not change in between the
reception of feedback packets;
* the parameter X_recv is either modified from received
feedback or via the nofeedback timer;
* a test (`p == 0') in the nofeedback timer avoids using
a stale/undefined value of X_calc if p was previously 0.
2) The nofeedback timer now only recomputes a timestamp when p == 0.
This is according to step (4) of [RFC 3448, 4.3] and avoids
unnecessarily determining a timestamp.
A debug statement about not updating X is also removed - it helps very
little in debugging and just clutters the logs.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This patch follows a suggestion by Ian McDonald and ensures that in
the current code the value of p can not exceed 100%. Such a value is
illegal and would consequently cause a bug condition in tfrc_calc_x().
The receiver case is also tested, and a warning message is added.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
It simplifies waiting for the CCID module to signal that a packet
is ready to be sent. Other simplifications flow on from this such as
removing constants.
As a result of this EAGAIN is not returned any more by dccp_wait_for_ccid
(which would otherwise lead to unnecessarily discarding the packet in
dccp_write_xmit).
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Replace all uses of kmem_cache_t with struct kmem_cache.
The patch was generated using the following script:
#!/bin/sh
#
# Replace one string by another in all the kernel sources.
#
set -e
for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do
quilt add $file
sed -e "1,\$s/$1/$2/g" $file >/tmp/$$
mv /tmp/$$ $file
quilt refresh
done
The script was run like this
sh replace kmem_cache_t "struct kmem_cache"
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
SLAB_ATOMIC is an alias of GFP_ATOMIC
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Conflicts:
drivers/ata/libata-scsi.c
include/linux/libata.h
Futher merge of Linus's head and compilation fixups.
Signed-Off-By: David Howells <dhowells@redhat.com>
Conflicts:
drivers/infiniband/core/iwcm.c
drivers/net/chelsio/cxgb2.c
drivers/net/wireless/bcm43xx/bcm43xx_main.c
drivers/net/wireless/prism54/islpci_eth.c
drivers/usb/core/hub.h
drivers/usb/input/hid-core.c
net/core/netpoll.c
Fix up merge failures with Linus's head and fix new compilation failures.
Signed-Off-By: David Howells <dhowells@redhat.com>
This replaces the linear search algorithm for reverse lookup with
binary search.
It has the advantage of better scalability: O(log2(N)) instead of O(N).
This means that the average number of iterations is reduced from 250
(linear search if each value appears equally likely) down to at most 9.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This patch deprecates the existing use of an arbitrary value TFRC_SMALLEST_P
for low-threshold values of p. This avoids masking low-resolution errors.
Instead, the code now checks against real boundaries (implemented by preceding
patch) and provides warnings whenever a real value falls below the threshold.
If such messages are observed, it is a better solution to take this as an
indication that the lookup table needs to be re-engineered.
Changelog:
----------
This patch
* makes handling all TFRC resolution errors local to the TFRC library
* removes unnecessary test whether X_calc is 'infinity' due to p==0 -- this
condition is already caught by tfrc_calc_x()
* removes setting ccid3hctx_p = TFRC_SMALLEST_P in ccid3_hc_tx_packet_recv
since this is now done by the TFRC library
* updates BUG_ON test in ccid3_hc_tx_no_feedback_timer to take into account
that p now is either 0 (and then X_calc is irrelevant), or it is > 0; since
the handling of TFRC_SMALLEST_P is now taken care of in the tfrc library
Justification:
--------------
The TFRC code uses a lookup table which has a bounded resolution.
The lowest possible value of the loss event rate `p' which can be
resolved is currently 0.0001. Substituting this lower threshold for
p when p is less than 0.0001 results in a huge, exponentially-growing
error. The error can be computed by the following formula:
(f(0.0001) - f(p))/f(p) * 100 for p < 0.0001
Currently the solution is to use an (arbitrary) value
TFRC_SMALLEST_P = 40 * 1E-6 = 0.00004
and to consider all values below this value as `virtually zero'. Due to
the exponentially growing resolution error, this is not a good idea, since
it hides the fact that the table can not resolve practically occurring cases.
Already at p == TFRC_SMALLEST_P, the error is as high as 58.19%!
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This
* adds documentation about the lowest resolution that is possible within
the bounds of the current lookup table
* defines a constant TFRC_SMALLEST_P which defines this resolution
* issues a warning if a given value of p is below resolution
* combines two previously adjacent if-blocks of nearly identical
structure into one
This patch does not change the algorithm as such.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
1) For the forward X_calc lookup, it
* protects effectively against RTT=0 (this case is possible), by
returning the maximal lookup value instead of just setting it to 1
* reformulates the array-bounds exceeded condition: this only happens
if p is greater than 1E6 (due to the scaling)
* the case of negative indices can now with certainty be excluded,
since documentation shows that the formulas are within bounds
* additional protection against p = 0 (would give divide-by-zero)
2) For the reverse lookup, it warns against
* protects against exceeding array bounds
* now returns 0 if f(p) = 0, due to function definition
* warns about minimal resolution error and returns the smallest table
value instead of p=0 [this would mask congestion conditions]
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This fixes the following small error in tfrc_calc_x_reverse_lookup.
1) The table is generated by the following equations:
lookup[index][0] = g((index+1) * 1000000/TFRC_CALC_X_ARRSIZE);
lookup[index][1] = g((index+1) * TFRC_CALC_X_SPLIT/TFRC_CALC_X_ARRSIZE);
where g(q) is 1E6 * f(q/1E6)
2) The reverse lookup assigns an entry in lookup[index][small]
3) This index needs to match the above, i.e.
* if small=0 then
p = (index + 1) * 1000000/TFRC_CALC_X_ARRSIZE
* if small=1 then
p = (index+1) * TFRC_CALC_X_SPLIT/TFRC_CALC_X_ARRSIZE
These are exactly the changes that the patch makes; previously the code did
not conform to the way the lookup table was generated (this difference resulted
in a mean error of about 1.12%).
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This adds documentation for the TCP Reno throughput equation which is at
the heart of the TFRC sending rate / loss rate calculations.
It spells out precisely how the values were determined and what they mean.
The equations were derived through reverse engineering and found to be
fully accurate (verified using test programs).
This patch does not change any code.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This avoids a (harmless) warning message being printed at the DCCP server
(the receiver of a DCCP half connection).
Incoming packets are both directed to
* ccid_hc_rx_packet_recv() for the server half
* ccid_hc_tx_packet_recv() for the client half
The message gets printed since on a server the client half is currently not
sending data packets.
This is resolved for the moment by checking the DCCP-role first. In future
times (bidirectional DCCP connections), this test may have to be more
sophisticated.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
The main object of this patch is the following bug:
==> In ccid3_hc_tx_packet_recv, the parameters p and X_recv were updated
_after_ the send rate was calculated. This is clearly an error and is
resolved by re-ordering statements.
In addition,
* r_sample is converted from u32 to long to check whether the time difference
was negative (it would otherwise be converted to a large u32 value)
* protection against RTT=0 (this is possible) is provided in a further patch
* t_elapsed is also converted to long, to match the type of r_sample
* adds a a more debugging information regarding current send rates
* various trivial comment/documentation updates
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This bug resulted in ccid3_hc_tx_send_packet returning negative
delay values, which in turn triggered silently dequeueing packets in
dccp_write_xmit. As a result, only a few out of the submitted packets made
it at all onto the network. Occasionally, when dccp_wait_for_ccid was
involved, this also triggered a bug warning since ccid3_hc_tx_send_packet
returned a negative value (which in reality was a negative delay value).
The cause for this bug lies in the comparison
if (delay >= hctx->ccid3hctx_delta)
return delay / 1000L;
The type of `delay' is `long', that of ccid3hctx_delta is `u32'. When comparing
negative long values against u32 values, the test returned `true' whenever delay
was smaller than 0 (meaning the packet was overdue to send).
The fix is by casting, subtracting, and then testing the difference with
regard to 0.
This has been tested and shown to work.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
The TFRC nofeedback timer normally expires after the maximum of 4
RTTs and twice the current send interval (RFC 3448, 4.3). On LANs
with a small RTT this can mean a high processing load and reduced
performance, since then the nofeedback timer is triggered very
frequently.
This patch provides a configuration option to set the bound for the
nofeedback timer, using as default 100 milliseconds.
By setting the configuration option to 0, strict RFC 3448 behaviour
can be enforced for the nofeedback timer.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This patch implements a suggestion by Ian McDonald and
1) Avoids tests against negative packet lengths by using unsigned int
for packet payload lengths in the CCID send_packet()/packet_sent() routines
2) As a consequence, it removes an now unnecessary test with regard to `len > 0'
in ccid3_hc_tx_packet_sent: that condition is always true, since
* negative packet lengths are avoided
* ccid3_hc_tx_send_packet flags an error whenever the payload length is 0.
As a consequence, ccid3_hc_tx_packet_sent is never called as all errors
returned by ccid_hc_tx_send_packet are caught in dccp_write_xmit
3) Removes the third argument of ccid_hc_tx_send_packet (the `len' parameter),
since it is currently always set to skb->len. The code is updated with regard
to this parameter change.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This implements the larger-initial-windows feature for CCID 3, as described in
section 5 of RFC 4342. When the first feedback packet arrives, the sender can
send up to 2..4 packets per RTT, instead of just one.
The patch further
* reduces the number of timestamping calls by passing the timestamp value
(which is computed in one of the calling functions anyway) as argument
* renames one constant with a very long name into one which is shorter and
resembles the one in RFC 3448 (t_mbi)
* simplifies some of the min_t/max_t cases where both `x', `y' have the same
type
Commiter note: renamed TFRC_t_mbi to TFRC_T_MBI, to follow Linux coding style.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
To reflect the fact that this now is of no effect, not making apps
stop working, just be warned in the system log.
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This removes and cleans up unused variables and structures which have become
unnecessary following the introduction of the EWMA patch to automatically track
the CCID 3 receiver/sender packet sizes `s'.
It deprecates the PACKET_SIZE socket option by returning an error code and
printing a deprecation warning if an application tries to read or write this
socket option.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This corrects the setting of the nofeedback timer with regard to RFC
3448 - previously it was not set to max(4*R, 2*s/X) as specified. Using
the maximum of 1 second as upper bound (as it was done before) can have
detrimental effects, especially if R is small.
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This is in response to a request sent earlier by Eric W. Biederman
and replaces all sysctl numbers for net.dccp.default with CTL_UNNUMBERED.
It has been tested to compile and to work.
Commiter note: I've removed the use of CTL_UNNUMBERED, not setting .ctl_name
sets it to 0, that is the what CTL_UNNUMBERED is, reason is
to avoid unneeded source code cluttering.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This patch
* removes setting t_RTO in ccid3_hc_tx_init (per [RFC 3448, 4.2], t_RTO is
undefined until feedback has been received);
* makes some trivial changes (updates of comments);
* performs a small optimisation by exploiting that the feedback timeout
uses the value of t_ipi. The way it is done is safe, because the timeouts
appear after the changes to t_ipi, ensuring that up-to-date values are used;
* in ccid3_hc_tx_packet_recv, moves the t_rto statement closer to the calculation
of the next_tmout. This makes the code clearer to read and is also safe, since
t_rto is not updated until the next call of ccid3_hc_tx_packet_recv, and is not
read by the functions called via ccid_wait_for_ccid();
* removes a `max' statement in sk_reset_timer, this is not needed since the timeout
value is always greater than 1E6 microseconds.
* adds `XXX'es to highlight that currently the nofeedback timer is set
in a non-standard way
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This patch:
* consolidates updating of parameters (t_nom, t_ipi, t_delta) which
need to be updated at the same time, since they are inter-dependent
* removes two inline functions which are no longer needed as a result of
the above consolidation
* resolves a FIXME regarding the re-calculation of t_ipi within the nofeedback
timer, in the state where no feedback has previously been received
* ties updating these parameters to updating the sending rate X, exploiting
that all three parameters in turn depend on X; and using a small optimisation
which can reduce the number of required instructions: only update the three
parameters when X really changes
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This patch concerns updating the value of the nofeedback timer when no feedback
has been received so far.
Since in this case the value of R is still undefined according to [RFC 3448,
4.2], we can not perform step (3) of [RFC 3448, 4.3]. A clarification is
provided in [RFC 4342, sec. 5], which states that in these cases the nofeedback
timer (still) expires "after two seconds".
Many thanks to Ian McDonald for pointing this out and providing the
clarification.
The patch
* implements [RFC 4342, sec. 5] with regard to the above case
* consolidates handling timer restart by
- adding an appropriate jump label and
- initialising the timeout value
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This considers the case - ACK received while no packet has been sent
so far. Resolved by printing a (rate-limited) warning message.
Further removes an unnecessary BUG_ON in ccid3_hc_tx_packet_recv,
received feedback on a terminating connection is simply ignored.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This patch removes a switch statement which is redundant since,
* nothing is done in states TFRC_SSTATE_NO_SENT/TFRC_SSTATE_NO_FBACK
* it is impossible that the function is called in the state TFRC_SSTATE_TERM, since
--the function is called, in dccp_write_xmit, after ccid3_hc_tx_send_packet
--if ccid3_hc_tx_send_packet is called in state TFRC_SSTATE_TERM, it returns
-EINVAL, which means that ccid3_hc_tx_packet_sent will not be called
(compare dccp_write_xmit)
--> therefore, this case is logically impossible
* the remaining state is TFRC_SSTATE_FBACK which conditionally updates t_ipi, t_nom,
and t_delta. This is a no-op, since
--t_ipi only changes when feedback is received
--however, when feedback arrives via ccid3_hc_tx_packet_recv, there is an identical
code block which performs the same set of operations
--performing the same set of operations again in ccid3_hc_tx_packet_sent therefore
does not change anything, since between the time of receiving the last feedback
(and therefore update of t_ipi, t_nom, and t_delta), the value of t_ipi has not
changed
--since t_ipi has not changed, the values of t_delta and t_nom also do not change,
they depend fully on t_ipi
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This resolves an `XXX' in ccid3_hc_tx_send_packet().
The function is only called on Data and DataAck packets and returns a negative
result on zero-sized messages. This is a reasonable policy since CCID 3 is a
congestion-control module and congestion control on zero-sized Data(Ack)
packets is in a way pathological.
The patch uses a more suitable error code for this case, it returns the Posix.1
code `EBADMSG' ("Not a data message") instead of `ENOTCONN'.
As a result of ignoring zero-sized packets, a the condition for a warning
"First packet is data" in ccid3_hc_tx_packet_sent is always satisfied; this
message has been removed since it will always be printed.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This makes some logically equivalent simplifications, by replacing
rc - values plus goto's with direct return statements.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This patch performs a simplifying (performance) optimisation:
In each call of the inline function ccid3_calc_new_t_ipi(), the state is
tested against TFRC_SSTATE_NO_FBACK. This is expensive when the function
is called very often. A simpler solution, implemented by this patch, is
to adapt the control flow.
Background:
Now that we can stuff bigger ack vectors into options.
Signed-off-by: Andrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Ack vectors grow proportional to the window size. If an ack vector does not fit
into a single option, it must be spread across multiple options. This patch
will allow for windows to grow larger.
Committer note: Simplified the patch a bit, original algorithm kept.
Signed-off-by: Andrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Commiter note:
This was split from Andrea's original patch, in the process I changed the type
of the ackvec index fields to u16 instead of to int and haven't folded
dccp_ackvec_parse with dccp_ackvec_check_rcv_ackno.
Next patch will actually do the insertion of more than one ackvec per packet,
using, initially, up to a max of 2 ackvecs as per Andrea's original patch, then
I'll work on support for larger ackvecs, be it using a sysctl or using
setsockopt.
Signed-off-by: Andrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Commiter note: original patch was splitted.
Signed-off-by: Andrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This one got lost on the way from Ian to Gerrit to me, fix it.
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This removes a non-referenced variable.
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This makes the code of the dccp_probe module more portable.
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This adds documentation to the CCID 3 rx/tx socket fields, plus some
minor re-formatting.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This reaps the benefit of the earlier patch, which changed the type of
CCID 3 states to use enums, in that many conditions are now simplified
and the number of possible (unexpected) values is greatly reduced.
In a few instances, this also allowed to simplify pre-conditions; where
care has been taken to retain logical equivalence.
[DCCP]: Introduce a consistent BUG/WARN message scheme
This refines the existing set of DCCP messages so that
* BUG(), BUG_ON(), WARN_ON() have meaningful DCCP-specific counterparts
* DCCP_CRIT (for severe warnings) is not rate-limited
* DCCP_WARN() is introduced as rate-limited wrapper
Using these allows a faster and cleaner transition to their original
counterparts once the code has matured into a full DCCP implementation.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Previously the transmit queue was unbounded.
This patch:
* puts a limit on transmit queue length
and sends back EAGAIN if the buffer is full
* sets the TX queue length to a sensible default
* implements tx buffer sysctls for DCCP
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This adds a CCID3 debug option to the configuration menu
which is missing in Kconfig, but already used by the code.
CCID 2 already provides such an entry.
To enable debugging, set CONFIG_IP_DCCP_CCID3_DEBUG=y
NOTE: The use of ccid3_{t,r}x_state_name is safe, since
now only enum values can appear.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This patch
* makes debugging (when configured) work both for static / module build
* provides generic debugging macros for use in other DCCP / CCID modules
* adds missing information about debug parameters to Kconfig
* performs some code tidy-up
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
These are code optimizations which are relevant when dealing with large
windows. They are not coded the way I would like to, but they do the job for
the short-term. This patch should be more neat.
Commiter note: Changed the seqno comparisions to use {after,before}48 to handle
wrapping.
Signed-off-by: Andrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Spotted by Ian McDonald, tentatively fixed by Gerrit Renker:
http://www.mail-archive.com/dccp%40vger.kernel.org/msg00599.html
Rewritten not to unroll sk_receive_skb, in the common case, i.e. no lock
debugging, its optimized away.
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This patch tackles the following problem:
* the ccid3_hc_{t,r}x_sock define ccid3hc{t,r}x_state as `u8', but
in reality there can only be a few, pre-defined enum names
* this necessitates addiditional checking for unexpected values
which would otherwise be caught by the compiler
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Do not traverse the list of ack vector records [proportional to window size]
when we know we will not find what we are looking for. This is especially
useful because ack vectors are checked twice:
1) Upon parsing of options.
2) Upon notification of a new ack.
All of the work will occur during check #1. Therefore, when check #2 is
performed, no new work will be done. This is now "detected" and there is no
performance hit when doing #2.
Signed-off-by: Andrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This patch does not change code; it performs some trivial clean/tidy-ups:
* removal of a `debug_prefix' string in favour of the
already existing dccp_role(sk)
* add documentation of structures and constants
* separated out the cases for invalid packets (step 1
of the packet validation)
* removing duplicate statements
* combining declaration & initialisation
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This patch replaces cryptic feature negotiation messages of type
Oct 31 15:42:20 kernel: dccp_feat_change: feat change type=32 feat=1
Oct 31 15:42:21 kernel: dccp_feat_change: feat change type=34 feat=1
Oct 31 15:42:21 kernel: dccp_feat_change: feat change type=32 feat=5
into ones of type:
Nov 2 13:54:45 kernel: dccp_feat_change: ChangeL(CCID (1), 3)
Nov 2 13:54:45 kernel: dccp_feat_change: ChangeR(CCID (1), 3)
Nov 2 13:54:45 kernel: dccp_feat_change: ChangeL(Ack Ratio (5), 2)
Also,
* completed the feature number list wrt RFC 4340 sec. 6.4
* annotating which ones have been implemented so far
* implemented rudimentary sanity checking in feat.c (FIXMEs)
* some minor fixes
Commiter note: uninlined dccp_feat_name and dccp_feat_typename, for
consistency with dccp_{state,packet}_name, that, BTW,
should be compiled only if CONFIG_IP_DCCP_DEBUG is
selected, leaving this to another cset tho. Also
shortened dccp_feat_negotiation_debug to dccp_feat_debug.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Resolves the problem that if IPv6 was configured `y' and DCCP `m' then
dccp_ipv6 was not built as a module. With this change, dccp_ipv6 is built
as a module whenever DCCP *OR* IPv6 are configured as modules; it will be
built-in only if both DCCP = `y' and IPV6 = `y'.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Throughout the TCP/DCCP (and tunnelling) code, it often happens that the
return code of a transmit function needs to be tested against NET_XMIT_CN
which is a value that does not indicate a strict error condition.
This patch uses a macro for these recurring situations which is consistent
with the already existing macro net_xmit_errno, saving on duplicated code.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This
* resolves a FIXME - DCCPv6 connections started all with
an initial sequence number of 1;
* provides a redirection `secure_dccpv6_sequence_number'
in case the init_sequence_v6 code should be updated later;
* concentrates the update of S.GAR into dccp_connect_init();
* removes a duplicate dccp_update_gss() in ipv4.c;
* uses inet->dport instead of usin->sin_port, due to the
following assignment in dccp_v4_connect():
inet->dport = usin->sin_port;
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This patch removes the following redundancies:
1) The test skb->protocol == htons(ETH_P_IPV6) in dccp_v6_init_sequence
is always true since
* dccp_v6_conn_request() is the only calling function
* dccp_v6_conn_request() redirects all skb's with ETH_P_IP to
dccp_v4_conn_request()
2) The first argument, `struct sock *sk', of dccp_v{4,6}_init_sequence()
is never used.
(This is similar for tcp_v{4,6}_init_sequence, an analogous patch has been
submitted to netdev and merged.)
By the way - are the `sport' / `dport' arguments in the right order?
I have made them consistent among calls but they seem to be in the
reverse order.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This removes 3 forward declarations by reordering 2 functions.
No code change at all.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
In order to make their function clearer and obtain a consistent naming
scheme to identify sysctls, all existing DCCP sysctls have been prefixed
with `sysctl_dccp', following the same convention as used by TCP.
Feature-specific sysctls retain the `feat' in the middle, although the
`default' has been dropped, since it is obvious from use.
Also removed a duplicate `dccp_feat_default_sequence_window' in ipv4.c.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This adds 3 sysctls which govern the retransmission behaviour of DCCP control
packets (3way handshake, feature negotiation).
It removes 4 FIXMEs from the code.
The close resemblance of sysctl variables to their TCP analogues is emphasised
not only by their name, but also by giving them the same initial values.
This is useful since there is not much practical experience with DCCP yet.
Furthermore, with regard to the previous patch, it is now possible to limit
the number of keepalive-Responses by setting net.dccp.default.request_retries
(also a bit like in TCP).
Lastly, added documentation of all existing DCCP sysctls.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This updates program documentation: spell out precise conditions about
which packets are eligible for retransmission (which is actually quite
hard to extract from RFC 4340).
It is based on the following table derived from RFC 4340:
+-----------+---------------------------------+---------------------+
| Type | Retransmit? | Remark |
+-----------+---------------------------------+---------------------+
| Request | in client-REQUEST state | sec. 8.1.1 |
| Response | NEVER | SHOULD NOT, 8.1.3 |
| Data | NEVER | unreliable protocol |
| Ack | possible in client-PARTOPEN | sec. 8.1.5 |
| DataAck | NEVER | unreliable protocol |
| CloseReq | only in server-CLOSEREQ state | MUST, sec. 8.3 |
| Close | in node-CLOSING state | MUST, sec. 8.3 |
+-----------+-------------------------------------------------------+
| Reset | only in response to other packets |
| Sync | only in response to sequence-invalid packets (7.5.4) |
| SyncAck | only in response to Sync packets |
+-----------+-------------------------------------------------------+
Hence the only packets eligible for retransmission are:
* Requests in client-REQUEST state (sec. 8.1.1)
* Acks in client-PARTOPEN state (sec. 8.1.5)
* CloseReq in server-CLOSEREQ state (sec. 8.3)
* Close in node-CLOSING state (sec. 8.3)
I had meant to put in a check for these types too, but have left that
for later.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This patch does the following:
a) introduces variable-length checksums as specified in [RFC 4340, sec. 9.2]
b) provides necessary socket options and documentation as to how to use them
c) basic support and infrastructure for the Minimum Checksum Coverage feature
[RFC 4340, sec. 9.2.1]: acceptability tests, user notification and user
interface
In addition, it
(1) fixes two bugs in the DCCPv4 checksum computation:
* pseudo-header used checksum_len instead of skb->len
* incorrect checksum coverage calculation based on dccph_x
(2) removes dccp_v4_verify_checksum() since it reduplicates code of the
checksum computation; code calling this function is updated accordingly.
(3) now uses skb_checksum(), which is safer than checksum_partial() if the
sk_buff has is a non-linear buffer (has pages attached to it).
(4) fixes an outstanding TODO item:
* If P.CsCov is too large for the packet size, drop packet and return.
The code has been tested with applications, the latest version of tcpdump now
comes with support for partial DCCP checksums.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Sorts out the comments for processing steps 2,3 in section 8.5 of RFC 4340.
All comments have been updated against this document, and the reference to step
2 has been made consistent throughout the files.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This patch fixes data being spewed into the logs continually. As the
code stood if there was a large queue and long delays timeo would go
down to zero and never get reset.
This fixes it by resetting timeo. Put constant into header as well.
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Fixes a typo in Kconfig, patch is by Ian McDonald and is re-sent from
http://www.mail-archive.com/dccp@vger.kernel.org/msg00579.html
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This does the same for ipv6.c as the preceding one does for ipv4.c: Only the
inet_connection_sock_af_ops forward declarations remain, since at least
dccp_ipv6_mapped has a circular dependency to dccp_v6_request_recv_sock.
No code change, merely re-ordering.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This patch removes two functions, the send_ack functions of request_sock,
which are not called/used by the DCCP code. It is correct that these
functions are not called, below is a justification why calling these
functions (on a passive socket in the LISTEN/RESPOND state) would mean
a DCCP protocol violation.
A) Background: using request_sock in TCP:
Gerrit Renker noticed dccp_tw_deschedule and submitted a patch with a FIXME,
but as he suggests in the same patch the best thing is to just ditch this
declaration, while doing that also noticed that tcp_tw_count is as well not
defined anywhere, so ditch it too.
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This is a code simplification and was singled out from the
DCCPv6 Oops patch on
http://www.mail-archive.com/dccp@vger.kernel.org/msg00600.html
It mainly makes the code consistent between ipv{4,6}.c for the functions
dccp_v4_rcv
dccp_v6_rcv
and removes the do_time_wait label to simplify code somewhat.
Commiter note: fixed up a compile problem, trivial.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This is a code simplification:
it combines three often recurring operations into one inline function,
* allocate `len' bytes header space in skb
* fill these `len' bytes with zeroes
* cast the start of this header space as dccp_hdr
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This is a re-send from
http://www.mail-archive.com/dccp@vger.kernel.org/msg00553.html
It is the same patch as before, but I have built in Arnaldo's suggestions
pointed out in that posting.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
The data itself is already charged to the SKB, doing
the skb_set_owner_w() just generates a lot of noise and
extra atomics we don't really need.
Lmbench improvements on lat_tcp are minimal:
before:
TCP latency using localhost: 23.2701 microseconds
TCP latency using localhost: 23.1994 microseconds
TCP latency using localhost: 23.2257 microseconds
after:
TCP latency using localhost: 22.8380 microseconds
TCP latency using localhost: 22.9465 microseconds
TCP latency using localhost: 22.8462 microseconds
Signed-off-by: David S. Miller <davem@davemloft.net>
We currently allocate a fixed size (TCP_SYNQ_HSIZE=512) slots hash table for
each LISTEN socket, regardless of various parameters (listen backlog for
example)
On x86_64, this means order-1 allocations (might fail), even for 'small'
sockets, expecting few connections. On the contrary, a huge server wanting a
backlog of 50000 is slowed down a bit because of this fixed limit.
This patch makes the sizing of listen hash table a dynamic parameter,
depending of :
- net.core.somaxconn tunable (default is 128)
- net.ipv4.tcp_max_syn_backlog tunable (default : 256, 1024 or 128)
- backlog value given by user application (2nd parameter of listen())
For large allocations (bigger than PAGE_SIZE), we use vmalloc() instead of
kmalloc().
We still limit memory allocation with the two existing tunables (somaxconn &
tcp_max_syn_backlog). So for standard setups, this patch actually reduce RAM
usage.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The return value of kfifo_alloc() should be checked by IS_ERR().
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TCP and RAW do not have this issue. Closes Bug #7432.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix printk format warnings:
build2.out:net/dccp/ccids/ccid2.c:355: warning: long long unsigned int format, u64 arg (arg 3)
build2.out:net/dccp/ccids/ccid2.c:360: warning: long long unsigned int format, u64 arg (arg 3)
build2.out:net/dccp/ccids/ccid2.c:482: warning: long long unsigned int format, u64 arg (arg 5)
build2.out:net/dccp/ccids/ccid2.c:639: warning: long long unsigned int format, u64 arg (arg 3)
build2.out:net/dccp/ccids/ccid2.c:639: warning: long long unsigned int format, u64 arg (arg 4)
build2.out:net/dccp/ccids/ccid2.c:674: warning: long long unsigned int format, u64 arg (arg 3)
build2.out:net/dccp/ccids/ccid2.c:720: warning: long long unsigned int format, u64 arg (arg 3)
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Updates the references to spec documents throughout the code, taking into
account that
* the DCCP, CCID 2, and CCID 3 drafts all became RFCs in March this year
* RFC 1063 was obsoleted by RFC 1191
* draft-ietf-tcpimpl-pmtud-0x.txt was published as an Informational
RFC, RFC 2923 on 2000-09-22.
All references verified.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Based upon a patch from Jesper Juhl. Try to match the
TCP IPv6 code this was copied from as much as possible,
so that it's easy to see where to add the ipv6 pktoptions
support code.
Signed-off-by: David S. Miller <davem@davemloft.net>
I think I got the cause for the Oops observed in
http://www.mail-archive.com/dccp@vger.kernel.org/msg00578.html
The problem is always with applications listening on PF_INET6 sockets. Apart
from the mentioned oops, I observed another one one, triggered at irregular
intervals via timer interrupt:
run_timer_softirq -> dccp_keepalive_timer
-> inet_csk_reqsk_queue_prune
-> reqsk_free
-> dccp_v6_reqsk_destructor
The latter function is the problem and is also the last function to be called
in said kernel panic.
In any case, there is a real problem with allocating the right request_sock
which is what this patch tackles.
It fixes the following problem:
- application listens on PF_INET6
- DCCPv4 packet comes in, is handed over to dccp_v4_do_rcv, from there
to dccp_v4_conn_request
Now: socket is PF_INET6, packet is IPv4. The following code then furnishes the
connection with IPv6 - request_sock operations:
req = reqsk_alloc(sk->sk_prot->rsk_prot);
The first problem is that all further incoming packets will get a Reset since
the connection can not be looked up.
The second problem is worse:
--> reqsk_alloc is called instead of inet6_reqsk_alloc
--> consequently inet6_rsk_offset is never set (dangling pointer)
--> the request_sock_ops are nevertheless still dccp6_request_ops
--> destructor is called via reqsk_free
--> dccp_v6_reqsk_destructor tries to free random memory location (inet6_rsk_offset not set)
--> panic
I have tested this for a while, DCCP sockets are now handled correctly in all
three scenarios (v4/v6 only/v4-mapped).
Commiter note: I've added the dccp_request_sock_ops forward declaration to keep
the tree building and to reduce the size of the patch for 2.6.19,
later I'll move the functions to the top of the affected source
code to match what we have in the TCP counterpart, where this
problem hasn't existed in the first place, dumb me not to have
done the same thing on DCCP land 8)
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
annotated address arguments (port number left alone for now); ditto
for inferred net-endian variables in callers.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds DCCP probing shamelessly ripped off from TCP probes by Stephen
Hemminger.
I've put in here support for further CCID3 variables as well.
Andrea/Arnaldo might look to extend for CCID2.
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
With constants for CCID numbers this now uses them in some places.
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
This has been discussed on dccp@vger and removes the necessity for applications
to supply service codes in each and every case.
If an application does not want to provide a service code, that's fine, it will
be given 0. Otherwise, service codes can be set via socket options as before.
This patch has been tested using various client/server configurations
(including listening on multiple service codes).
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Introduce methods which manipulate interesting congestion control
state such as pipe and rtt estimate. This is useful for people
wishing to monitor the variables of CCID and instrument the code
[perhaps using Kprobes]. Personally, I am a fan of
encapsulation---that justifies this change =D.
Signed-off-by: Andrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When multiple losses occur in one RTT, the window should be halved
only once [a single "congestion event"]. This is now implemented,
although not perfectly. Slightly changed the interface for changing
the cwnd: pass hctx instead of dp. This is required in order to allow
for change_cwnd to be called from _init().
Signed-off-by: Andrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allocate more sequence state on demand. Each time a packet is sent
out by CCID2, a record of it needs to be kept. This list of records
grows proportionally to cwnd. Previously, the length of this list was
hardcored and therefore the cwnd could only grow to this value (of
128). Now, records are allocated on demand as necessary---cwnd may
grow as it wishes. The exceptional case of when memory is not
available is not handled gracefully. Perhaps, cwnd should be capped
at that point.
Signed-off-by: Andrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow the user to choose whether or not to enable CCID2 debugging via
Kconfig.
Signed-off-by: Andrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If not enough cwnd is available, tell the sender to check again as
soon as possible. This will increase CPU utilization (polling
frequently for cwnd) but will improve network performance. That is,
the sender will need to wait less before detecting the increase of
cwnd. A better architecture would be for the CCID to call-back (or
dequeue) from DCCP when it is able to transmit traffic -- not the
other way around as it currently occurs.
Signed-off-by: Andrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Initialize the slow-start threshold to infinity. This way, upon connection
initiation, slow-start will be exited only upon a packet loss. This patch will
allow connections to quickly gain speed.
Signed-off-by: Andrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiffies are now handled correctly (I hope) in CCID2. If they wrap, no
problem.
Signed-off-by: Andrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Get rid of unused variables in ackvector state.
Signed-off-by: Andrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the way state is masked out. DCCP_ACKVEC_STATE_NOT_RECEIVED is
defined as appears in the packet, therefore bit shifting is not
required. This fix allows CCID2 to correctly detect losses.
Signed-off-by: Andrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix ackvector length calculation upon receiving an "ack-of-ack". This
patch avoids the ackvector from growing too large which causes it to
not be inserted into packets.
Signed-off-by: Andrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Function sk_filter() is called from tcp_v{4,6}_rcv() functions with arg
needlock = 0, while socket is not locked at that moment. In order to avoid
this and similar issues in the future, use rcu for sk->sk_filter field read
protection.
Signed-off-by: Dmitry Mishin <dim@openvz.org>
Signed-off-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: Kirill Korotaev <dev@openvz.org>
As Arnaldo Carvalho de Melo points out I should be using list_entry in case
the structure changes in future. Current code functions but is reliant
on position and requires type cast.
Noticed when doing this that I have one more variable than I needed so
removing that also.
Signed off by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds transmit buffering to DCCP.
I have tested with CCID2/3 and with loss and rate limiting.
Signed off by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
This shifts further sysctls into feat.h. No change in
functionality - shifting code only.
Signed off by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Based on MIPL2 kernel patch.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Ville Nuorvala <vnuorval@tcs.hut.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Right now most inet_lookup_* functions take a host-order hnum instead
of a network-order dport because that's how it is represented
internally.
This means that users of these functions have to be careful about
using the right byte-order. To add more confusion, inet_lookup takes
a network-order dport unlike all other functions.
So this patch changes all visible inet_lookup functions to take a
dport and move all dport->hnum conversion inside them.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This automatically labels the TCP, Unix stream, and dccp child sockets
as well as openreqs to be at the same MLS level as the peer. This will
result in the selection of appropriately labeled IPSec Security
Associations.
This also uses the sock's sid (as opposed to the isec sid) in SELinux
enforcement of secmark in rcv_skb and postroute_last hooks.
Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This labels the flows that could utilize IPSec xfrms at the points the
flows are defined so that IPSec policy and SAs at the right label can
be used.
The following protos are currently not handled, but they should
continue to be able to use single-labeled IPSec like they currently
do.
ipmr
ip_gre
ipip
igmp
sit
sctp
ip6_tunnel (IPv6 over IPv6 tunnel device)
decnet
Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes CCID3 to give much closer performance to RFC4342.
CCID3 is meant to alter sending rate based on RTT and loss.
The performance was verified against:
http://wand.net.nz/~perry/max_download.php
For example I tested with netem and had the following parameters:
Delayed Acks 1, MSS 256 bytes, RTT 105 ms, packet loss 5%.
This gives a theoretical speed of 71.9 Kbits/s. I measured across three
runs with this patch set and got 70.1 Kbits/s. Without this patchset the
average was 232 Kbits/s which means Linux can't be used for CCID3 research
properly.
I also tested with netem turned off so box just acting as router with 1.2
msec RTT. The performance with this is the same with or without the patch
at around 30 Mbit/s.
Signed off by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds a new function dccp_rx_hist_find_entry.
Signed off by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds a new function to see if two sequence numbers follow each
other.
Signed off by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes a small typo in net/dccp/libs/packet_history.c
Signed off by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current users of ip6_dst_lookup can be divided into two classes:
1) The caller holds no locks and is in user-context (UDP).
2) The caller does not want to lookup the dst cache at all.
The second class covers everyone except UDP because most people do
the cache lookup directly before calling ip6_dst_lookup. This patch
adds ip6_sk_dst_lookup for the first class.
Similarly ip6_dst_store users can be divded into those that need to
take the socket dst lock and those that don't. This patch adds
__ip6_dst_store for those (everyone except UDP/datagram) that don't
need an extra lock.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
When using the default sequence window size (100) I got the following in
my logs:
Jun 22 14:24:09 localhost kernel: [ 1492.114775] DCCP: Step 6 failed for
DATA packet, (LSWL(6279674225) <= P.seqno(6279674749) <=
S.SWH(6279674324)) and (P.ackno doesn't exist or LAWL(18798206530) <=
P.ackno(1125899906842620) <= S.AWH(18798206548), sending SYNC...
Jun 22 14:24:09 localhost kernel: [ 1492.115147] DCCP: Step 6 failed for
DATA packet, (LSWL(6279674225) <= P.seqno(6279674750) <=
S.SWH(6279674324)) and (P.ackno doesn't exist or LAWL(18798206530) <=
P.ackno(1125899906842620) <= S.AWH(18798206549), sending SYNC...
I went to alter the default sysctl and it didn't take for new sockets.
Below patch fixes this.
I think the default is too low but it is what the DCCP spec specifies.
As a side effect of this my rx speed using iperf goes from about 2.8 Mbits/sec
to 3.5. This is still far too slow but it is a step in the right direction.
Compile tested only for IPv6 but not particularly complex change.
Signed off by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
No actual bugs that I can see just a couple of unmarked casts
getting annoying in my debug log files.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Default values for boolean and tristate options can only be 'y', 'm' or 'n'.
This patch removes wrong default for IP_DCCP_ACKVEC.
Signed-off-by: Jean-Luc Leger <jean-luc.leger@dspnet.fr.eu.org>
Cc: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add an extra argument to sk_eat_skb, and make it move early copied
packets to the async_wait_queue instead of freeing them.
Signed-off-by: Chris Leech <christopher.leech@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A soft lockup existed in the handling of ack vector records.
Specifically, when a tail of the list of ack vector records was
removed, it was possible to end up iterating infinitely on an element
of the tail.
Signed-off-by: Andrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Calling sock_orphan inside bh_lock_sock in dccp_close can lead to dead
locks. For example, the inet_diag code holds sk_callback_lock without
disabling BH. If an inbound packet arrives during that admittedly tiny
window, it will cause a dead lock on bh_lock_sock. Another possible
path would be through sock_wfree if the network device driver frees the
tx skb in process context with BH enabled.
We can fix this by moving sock_orphan out of bh_lock_sock.
The tricky bit is to work out when we need to destroy the socket
ourselves and when it has already been destroyed by someone else.
By moving sock_orphan before the release_sock we can solve this
problem. This is because as long as we own the socket lock its
state cannot change.
So we simply record the socket state before the release_sock
and then check the state again after we regain the socket lock.
If the socket state has transitioned to DCCP_CLOSED in the time being,
we know that the socket has been destroyed. Otherwise the socket is
still ours to keep.
This problem was discoverd by Ingo Molnar using his lock validator.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
we dont free req if we cant parse the options.
This fixes coverity bug id #1046
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
From: Randy Dunlap <rdunlap@xenotime.net>
Use NULL instead of 0 for pointers.
Fix these sparse warnings:
net/dccp/feat.c:207:20: warning: Using plain integer as NULL pointer
net/dccp/feat.c:325:21: warning: Using plain integer as NULL pointer
net/dccp/feat.c:526:20: warning: Using plain integer as NULL pointer
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement the half-closed devices notifiation, by adding a new POLLRDHUP
(and its alias EPOLLRDHUP) bit to the existing poll/select sets. Since the
existing POLLHUP handling, that does not report correctly half-closed
devices, was feared to be changed, this implementation leaves the current
POLLHUP reporting unchanged and simply add a new bit that is set in the few
places where it makes sense. The same thing was discussed and conceptually
agreed quite some time ago:
http://lkml.org/lkml/2003/7/12/116
Since this new event bit is added to the existing Linux poll infrastruture,
even the existing poll/select system calls will be able to use it. As far
as the existing POLLHUP handling, the patch leaves it as is. The
pollrdhup-2.6.16.rc5-0.10.diff defines the POLLRDHUP for all the existing
archs and sets the bit in the six relevant files. The other attached diff
is the simple change required to sys/epoll.h to add the EPOLLRDHUP
definition.
There is "a stupid program" to test POLLRDHUP delivery here:
http://www.xmailserver.org/pollrdhup-test.c
It tests poll(2), but since the delivery is same epoll(2) will work equally.
Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is in preparation for having a dccp_minisock embedded into
dccp_request_sock so that feature negotiation can be done prior to
creating the full blown dccp_sock.
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This will later be included in struct dccp_request_sock so that we can
have per connection feature negotiation state while in the 3way
handshake, when we clone the DCCP_ROLE_LISTEN socket (in
dccp_create_openreq_child) we'll just copy this state from
dreq_minisock to dccps_minisock.
Also the feature negotiation and option parsing code will mostly touch
dccps_minisock, which will simplify some stuff.
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
No code changes, just tidying up, in some cases moving EXPORT_SYMBOLs
to just after the function exported, etc.
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch extends {get|set}sockopt compatibility layer in order to
move protocol specific parts to their place and avoid huge universal
net/compat.c file in the future.
Signed-off-by: Dmitry Mishin <dim@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
And not the silly LIMIT_NETDEBUG and silently return without inserting
the option requested.
Also drop some old debugging messages associated to option insertion.
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merging it with its only user: dccp_v[46]_reqsk_send_ack.
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using this also provides opportunities for introducing
inet_csk_alloc_skb that would call alloc_skb, account it to the sock
and skb_reserve(max_header), but I'll leave this for later, for now
using sk_prot->max_header consistently is enough.
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I.e. they should be just ignored, but we have to use 'break', not 'continue',
as we have to possibly reset the mandatory flag.
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to dccp draft (draft-ietf-dccp-spec-13.txt) section 5.8.2
(Mandatory Option) the following patch correct the handling of the
following cases:
1) "... and any Mandatory options received on DCCP-Data packets MUST be
ignored."
2) "The connection is in error and should be reset with Reset Code 5, ...
if option O is absent (Mandatory was the last byte of the option list), or
if option O equals Mandatory."
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
No changes in the logic were made, just removing trailing whitespaces,
etc.
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Consolidating open coded sequences in tcp and dccp, v4 and v6.
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I guess I forgot to add it, nah, now it just works:
18:04:33.274066 IP6 ::1.1476 > ::1.5001: request (service=0)
18:04:33.334482 IP6 ::1.5001 > ::1.1476: reset (code=bad_service_code)
Ditched IP_DCCP_UNLOAD_HACK, as now we would have to do it for both
IPv6 and IPv4, so I'll come up with another way for freeing the
control sockets in upcoming changesets.
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There's no reason for struct dccp_v4_prot being global.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With this patch in place we can break down the complexity by better
compartmentalizing the code that is common to ipv6 and ipv4.
Now we have these modules:
Module Size Used by
dccp_diag 1344 0
inet_diag 9448 1 dccp_diag
dccp_ccid3 15856 0
dccp_tfrc_lib 12320 1 dccp_ccid3
dccp_ccid2 5764 0
dccp_ipv4 16996 2
dccp 48208 4 dccp_diag,dccp_ccid3,dccp_ccid2,dccp_ipv4
dccp_ipv6 still requires dccp_ipv4 due to dccp_ipv6_mapped, that is
the next target to work on the "hey, ipv4 is legacy, I only want ipv6
dude!" direction.
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
And introduce dccp_mib_exit grouping previously open coded sequence.
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
dccp_make_response is shared by ipv4/6 and the ipv6 code was
recalculating the checksum, not good, so move the dccp_v4_checksum
call to dccp_v4_send_response.
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As this is used by both ipv4 and ipv6 and is not ipv4 specific.
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Removing one more ipv6 uses ipv4 stuff case in dccp land.
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Renaming it to dccp_send_reset and moving it from the ipv4 specific
code to the core dccp code.
This fixes some bugs in IPV6 where timers would send v4 resets, etc.
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[root@qemu ~]# for a in /proc/sys/net/dccp/default/* ; do echo $a ; cat $a ; done
/proc/sys/net/dccp/default/ack_ratio
2
/proc/sys/net/dccp/default/rx_ccid
3
/proc/sys/net/dccp/default/send_ackvec
1
/proc/sys/net/dccp/default/send_ndp
1
/proc/sys/net/dccp/default/seq_window
100
/proc/sys/net/dccp/default/tx_ccid
3
[root@qemu ~]#
So if wanting to test ccid3 as the tx CCID one can just do:
[root@qemu ~]# echo 3 > /proc/sys/net/dccp/default/tx_ccid
[root@qemu ~]# echo 2 > /proc/sys/net/dccp/default/rx_ccid
[root@qemu ~]# cat /proc/sys/net/dccp/default/[tr]x_ccid
2
3
[root@qemu ~]#
Of course we also need the setsockopt for each app to tell its preferences, but
for testing or defining something other than CCID2 as the default for apps that
don't explicitely set their preference the sysctl interface is handy.
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
So that dccp_feat_clean doesn't get confused with uninitialized
list_heads.
Noticed when testing with no ccid kernel modules.
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make CCID2 and CCID3 default to what was selected for DCCP and use the
standard short description for the CCIDs (TCP-Like & TCP-Friendly).
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This also fixes the layout of dccp_hdr short sequence numbers, problem
was not fatal now as we only support long (48 bits) sequence numbers.
Signed-off-by: Andrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change the CCID upon successful feature negotiation.
Commiter note: patch mostly rewritten to use the new ccid API.
Signed-off-by: Andrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
1. No need for ->ccid_init nor ->ccid_exit, this is what module_{init,exit}
does and anynways neither ccid2 nor ccid3 were using it.
2. Rename struct ccid to struct ccid_operations and introduce struct ccid
with a pointer to ccid_operations and rigth after it the rx or tx
private state.
3. Remove the pointer to the state of the half connections from struct
dccp_sock, now its derived thru ccid_priv() from the ccid pointer.
Now we also can implement the setsockopt for changing the CCID easily as
no ccid init routines can affect struct dccp_sock in any way that prevents
other CCIDs from working if a CCID switch operation is asked by apps.
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There was a hybrid use of standard timers and sk_timers. This caused
the reference count of the sock to be incorrect when resetting the RTO
timer. The sock reference count should now be correct, enabling its
destruction, and allowing the DCCP module to be unloaded.
Signed-off-by: Andrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Original work by Andrea Bittau, Arnaldo Melo cleaned up and fixed several
issues on the merge process.
For now CCID2 was turned the default for all SOCK_DCCP connections, but this
will be remedied soon with the merge of the feature negotiation code.
Signed-off-by: Andrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Testing if the ccid being instantiated has these methods in
ccid_init().
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Based on a patch by Andrea Bittau.
Signed-off-by: Andrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplifying the code a bit as we're always using DCCP_MAX_ACKVEC_LEN.
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In rare circumstances 0 is returned by dccp_li_hist_calc_i_mean which
leads to a divide by zero in ccid3_hc_rx_packet_recv. Explicitly check
for zero return now. Update copyright notice at same time.
Found by Arnaldo.
Signed-off-by: Ian McDonald <imcdnzl@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A bunch of asm/bug.h includes are both not needed (since it will get
pulled anyway) and bogus (since they are done too early). Removed.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It was copy&pasted from tcp_v6_send_synack() which has
a DST leak recently fixed by Eric W. Biederman.
So dccp_v6_send_response() needs the same fix too.
Signed-off-by: David S. Miller <davem@davemloft.net>
ip_route_newports uses the struct flowi from the struct rtable returned
by ip_route_connect for the new route lookup and just replaces the port
numbers if they have changed. If an IPsec policy exists which doesn't match
port 0 the struct flowi won't have the proto field set and no xfrm lookup
is done for the changed ports.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Handle NAT of decapsulated IPsec packets by reconstructing the struct flowi
of the original packet from the conntrack information for IPsec policy
checks.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Keep the conntrack reference until policy checks have been performed for
IPsec NAT support. The reference needs to be dropped before a packet is
queued to avoid having the conntrack module unloadable.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move nextheader offset to the IP6CB to make it possible to pass a
packet to ip6_input_finish multiple times and have it skip already
parsed headers. As a nice side effect this gets rid of the manual
hopopts skipping in ip6_input_finish.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ian McDonald