Commit Graph

20 Commits

Author SHA1 Message Date
Andrew Lunn cb6402fe26 net: phy: Add support for resolving 5G and 2.5G autoneg
Now that 2.5G and 5G can be represented in phydev->advertising and
phydev->lp_advertising, add these two links modes as possible
resolutions to auto negotiation.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-11 10:10:02 -08:00
Andrew Lunn 3c6b59d6f0 net: phy: Add more link modes to the settings table
Now that PHYs and MAC can support more than 32 bit masks, add link
modes which are > 31 to the PHY settings table.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-11 10:10:01 -08:00
Andrew Lunn c0ec3c2736 net: phy: Convert u32 phydev->lp_advertising to linkmode
Convert phy drivers to report the link partner advertised modes using
a linkmode bitmap. This allows them to report the higher speeds which
don't fit in a u32.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-11 10:10:01 -08:00
Andrew Lunn 3c1bcc8614 net: ethernet: Convert phydev advertize and supported from u32 to link mode
There are a few MAC/PHYs combinations which now support > 1Gbps. These
may need to make use of link modes with bits > 31. Thus their
supported PHY features or advertised features cannot be implemented
using the current bitmap in a u32. Convert to using a linkmode bitmap,
which can support all the currently devices link modes, and is future
proof as more modes are added.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-11 10:10:01 -08:00
Colin Ian King cc1122b00d net: phy: Fix spelling mistake: "advertisment"-> "advertisement"
Trivial fix to spelling mistake in comments and error message text.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-04 18:11:54 -05:00
Andrew Lunn 9f239fe6a6 net: phy: Have __phy_modify return 0 on success
__phy_modify would return the old value of the register before it was
modified. Thus on success, it does not return 0, but a positive value.
Thus functions using phy_modify, which is a wrapper around
__phy_modify, can start returning > 0 on success, rather than 0. As a
result, breakage has been noticed in various places, where 0 was
assumed.

Code inspection does not find any current location where the return of
the old value is currently used. So have __phy_modify return 0 on
success. When there is a real need for the old value, either a new
accessor can be added, or an additional parameter passed.

Fixes: fea23fb591 ("net: phy: convert read-modify-write to phy_modify()")
Fixes: 2b74e5be17 ("net: phy: add phy_modify() accessor")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-15 12:49:30 -05:00
Russell King f102852f98 net: phy: fix wrong masks to phy_modify()
The mask argument for phy_modify() in several locations was inverted.

Fixes: fea23fb591 ("net: phy: convert read-modify-write to phy_modify()")
Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-08 14:20:21 -05:00
Russell King 2b74e5be17 net: phy: add phy_modify() accessor
Add phy_modify() convenience accessor to complement the mdiobus
counterpart.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-03 11:00:23 -05:00
Russell King 78ffc4acce net: phy: add paged phy register accessors
Add a set of paged phy register accessors which are inherently safe in
their design against other accesses interfering with the paged access.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-03 11:00:23 -05:00
Russell King 788f9933db net: phy: add unlocked accessors
Add unlocked versions of the bus accessors, which allows access to the
bus with all the tracing. These accessors validate that the bus mutex
is held, which is a basic requirement for all mii bus accesses.

Also added is a read-modify-write unlocked accessor with the same
locking requirements.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-03 11:00:22 -05:00
Russell King 1b2dea2e6a net: phy: use unlocked accessors for indirect MMD accesses
Use unlocked accessors for indirect MMD accesses to clause 22 PHYs.
This permits tracing of these accesses.

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-03 11:00:22 -05:00
Russell King 8c5e850c0c net: phy: add helper to convert negotiation result to phy settings
Add a helper to convert the result of the autonegotiation advertisment
into the PHYs speed and duplex settings.  If the result is full duplex,
also extract the pause mode settings from the link partner advertisment.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02 15:00:50 -05:00
Russell King 1f3645bb41 net: phy: add 1000Base-X to phy settings table
Add the missing 1000Base-X entry to the phy settings table.  This was
not included because the original code could not cope with more than
32 bits of link mode mask.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 20:55:28 -07:00
Russell King 0ccb4fc65d net: phy: move phy_lookup_setting() and guts of phy_supported_speeds() to phy-core
phy_lookup_setting() provides useful functionality in ethtool code
outside phylib.  Move it to phy-core and allow it to be re-used (eg,
in phylink) rather than duplicated elsewhere.  Note that this supports
the larger linkmode space.

As we move the phy settings table, we also need to move the guts of
phy_supported_speeds() as well.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 20:55:28 -07:00
Russell King da4625ac26 net: phy: split out PHY speed and duplex string generation
Other code would like to make use of this, so make the speed and duplex
string generation visible, and place it in a separate file.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 20:55:28 -07:00
Dan Carpenter 1dbba4cb8d net: phy: test the right variable in phy_write_mmd()
This is a copy and paste buglet.  We meant to test for ->write_mmd but
we test for ->read_mmd.

Fixes: 1ee6b9bc62 ("net: phy: make phy_(read|write)_mmd() generic MMD accessors")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17 15:10:42 -04:00
Russell King 060fbc894b net: phy: clean up mmd_phy_indirect()
Make mmd_phy_indirect() use the same terminology as the rest of the
code, making clear what each address is - phy address, devad, and
register number.

While here, remove the "inline" from this static function, leaving
it to the compiler to decide whether to inline this function, and
get rid of unnecessary parens.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22 12:43:00 -07:00
Russell King 3b85d8df26 net: phy: remove the indirect MMD read/write methods
Remove the indirect MMD read/write methods which are now no longer
necessary.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22 12:43:00 -07:00
Russell King 1ee6b9bc62 net: phy: make phy_(read|write)_mmd() generic MMD accessors
Make phy_(read|write)_mmd() generic 802.3 clause 45 register accessors
for both Clause 22 and Clause 45 PHYs, using either the direct register
reading for Clause 45, or the indirect method for Clause 22 PHYs.
Allow this behaviour to be overriden by PHY drivers where necessary.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22 12:43:00 -07:00
Russell King 9860118b58 net: phy: move phy MMD accessors to phy-core.c
Move the phy_(read|write)__mmd() helpers out of line, they will become
our main MMD accessor functions, and so will be a little more complex.
This complexity doesn't belong in an inline function.  Also move the
_indirect variants as well to keep like functionality together.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22 12:42:59 -07:00