Unnecessary type casts from the void * rproc->priv pointer is dropped
throughout te subsystem.
A kernel-doc error is corrected in the Mediatek SCPI IPI implementation.
The firmware loading onto the IMX DSP remote processors is reworked to
avoid non-32bit memory operations. A module parameter is introduced to
assist development of firmware without communication abilities in place.
Error paths in imx_dsp_rproc_mbox_alloc() is cleaned up.
The cluster configuration handling in the TI K3 R5 driver is corrected
and support for the single-R5 core found in the TI AM62x SoC family is
introduced.
The TI PRU driver device- to virtual-address translation is updated to
avoid compiler warning about the unsigned device-address always being
larger than 0.
The ST remoteproc driver is transitioned to use of_property_present().
Issues with kicks arriving after the STM32 remote processor has been
shut down are mitigated by checking the processor's state before
handling them.
Support for mailbox channels for communication with the remote
processors are added to the Xilinx R5 remoteproc driver. The naming of
carveouts are corrected and their parsing is reworked.
For this a couple of fixes targeting the mailbox subsystem are picked up
here as well.
Reference counting of of_nodes are corrected in the ST, STM32, RCAR and
IMX remoteproc drivers.
-----BEGIN PGP SIGNATURE-----
iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmRGncUVHGFuZGVyc3Nv
bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3Fv4QQAOI09pf3QgA/OIUyCdfI83+/WHtp
n+WczvqNFhecyYwjmiv2h3QyNb+yZolGFEmFXgG6sboICm5Xji+eU5CG67AQq/q7
QkB4jqp+fu7DYXxr55kmWb4iusgptMxtnKRLUZsSThF2kNrPRny1m+RHd6thPgUK
Jt1P0bc599g0RF57fv7VTt5aUKfKrGPQq0i/2h1WOTKGVURXmaNrbcbfZkuK4Jmd
IeE13AyrdSZjEdbrLEEfZaYWXS66ubVm2nQRhFJ8z2tEaSawVelsjNDc0QmalQ6c
Av1VPPk9nDt1smSDmp6/+91AyCautXKYaCG6E/FKwwrI5xDTGvkiaJL0pk1XVcO3
1VxGH2TVROR4r/J93mRinvDiyOHE8RRaXHv52XPMqyC8DCpfbhqSoL5vjNGiBVef
Ox8qlBZBlMFgfsYPCeorfiuv5jOEQxbyghiAdIEHtIv89nrWYwsX8PFVx25C28xr
9ZTGwyWxu8HhTdCLmn4MFuQ9WfzpeTCkVLYS0Cu/elNU44w8qYNNQlPP1jBqDWdD
HRby1A2+SeIpfTlrbHHJdQ0ujSrUyLtnYn9AMKqjxyM831dcOOnn0zI1e/xwBpeV
kxUziu/zm7Ijr9LLViwJqeZI46eSmJjUhOxsNi1zZFlFw4UknWengbwR9fKf9Mkd
LFKFjgAPbnyPJEls
=HEds
-----END PGP SIGNATURE-----
Merge tag 'rproc-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- Unnecessary type casts from the 'void *' rproc->priv pointer are
dropped throughout the subsystem.
- A kernel-doc error is corrected in the Mediatek SCPI IPI
implementation
- The firmware loading onto the IMX DSP remote processors is reworked
to avoid non-32bit memory operations. A module parameter is
introduced to assist development of firmware without communication
abilities in place. Error paths in imx_dsp_rproc_mbox_alloc() is
cleaned up
- The cluster configuration handling in the TI K3 R5 driver is
corrected and support for the single-R5 core found in the TI AM62x
SoC family is introduced
- The TI PRU driver device- to virtual-address translation is updated
to avoid compiler warning about the unsigned device-address always
being larger than 0
- The ST remoteproc driver is transitioned to use of_property_present()
- Issues with kicks arriving after the STM32 remote processor has been
shut down are mitigated by checking the processor's state before
handling them.
- Support for mailbox channels for communication with the remote
processors are added to the Xilinx R5 remoteproc driver. The naming
of carveouts are corrected and their parsing is reworked. For this a
couple of fixes targeting the mailbox subsystem are picked up here as
well.
- Reference counting of of_nodes are corrected in the ST, STM32, RCAR
and IMX remoteproc drivers
* tag 'rproc-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (24 commits)
remoteproc: st: Use of_property_present() for testing DT property presence
dt-bindings: remoteproc: Drop unneeded quotes
remoteproc: imx_dsp_rproc: Fix kernel test robot sparse warning
remoteproc: imx_dsp_rproc: Improve exception handling in imx_dsp_rproc_mbox_alloc()
remoteproc: pru: Remove always true check positive unsigned value
dt-bindings: remoteproc: stm32-rproc: Typo fix
remoteproc: stm32_rproc: Add mutex protection for workqueue
remoteproc: Remove unnecessary (void*) conversions
remoteproc: imx_dsp_rproc: Call of_node_put() on iteration error
remoteproc: imx_rproc: Call of_node_put() on iteration error
remoteproc: rcar_rproc: Call of_node_put() on iteration error
remoteproc: st: Call of_node_put() on iteration error
remoteproc: stm32: Call of_node_put() on iteration error
remoteproc: k3-r5: Use separate compatible string for TI AM62x SoC family
dt-bindings: remoteproc: ti: Add new compatible for AM62 SoC family
remoteproc: k3-r5: Simplify cluster mode setting usage
remoteproc/mtk_scpi_ipi: Fix one kernel-doc comment
remoteproc: xilinx: Add mailbox channels for rpmsg
drivers: remoteproc: xilinx: Fix carveout names
mailbox: zynqmp: Fix typo in IPI documentation
...
Pointer variables of void * type do not require type cast.
Signed-off-by: Yu Zhe <yuzhe@nfschina.com>
Link: https://lore.kernel.org/r/20230328024907.29791-1-yuzhe@nfschina.com
[Fixed merge conflict in xlnx_r5_remoteproc.c]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The maximum VMID for assign_mem is 63. Use a u64 to represent this
bitmap instead of architecture-dependent "unsigned int" which varies in
size on 32-bit and 64-bit platforms.
Acked-by: Kalle Valo <kvalo@kernel.org> (ath10k)
Tested-by: Gokul krishna Krishnakumar <quic_gokukris@quicinc.com>
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213181832.3489174-1-quic_eberman@quicinc.com
As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv
-----BEGIN PGP SIGNATURE-----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=p6Xp
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv"
* tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
power: supply: Introduce Qualcomm PMIC GLINK power supply
soc: apple: rtkit: Do not copy the reg state structure to the stack
soc: sunxi: SUN20I_PPU should depend on PM
memory: renesas-rpc-if: Remove redundant division of dummy
soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
MAINTAINERS: Update qcom CPR maintainer entry
dt-bindings: firmware: document Qualcomm SM8550 SCM
dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
soc: qcom: socinfo: Add support for new field in revision 17
soc: qcom: smd-rpm: Add IPQ9574 compatible
soc: qcom: pmic_glink: remove redundant calculation of svid
soc: qcom: stats: Populate all subsystem debugfs files
dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
soc: qcom: pmic_glink: Introduce altmode support
...
Move include/linux/qcom_scm.h to include/linux/firmware/qcom/qcom_scm.h.
This removes 1 of a few remaining Qualcomm-specific headers into a more
approciate subdirectory under include/.
Suggested-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Guru Das Srinagesh <quic_gurus@quicinc.com>
Acked-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230203210956.3580811-1-quic_eberman@quicinc.com
Any access to the dynamically allocated metadata region by the application
processor after assigning it to the remote Q6 will result in a XPU
violation. Fix this by replacing the dynamically allocated memory region
with a no-map carveout and unmap the modem metadata memory region before
passing control to the remote Q6.
Reported-and-tested-by: Amit Pundir <amit.pundir@linaro.org>
Fixes: 6c5a9dc248 ("remoteproc: qcom: Make secure world call for mem ownership switch")
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117085840.32356-7-quic_sibis@quicinc.com
This reverts commit fc156629b2.
This commit manages to do three API violations at once:
- dereference the return value of dma_alloc_attrs with the
DMA_ATTR_NO_KERNEL_MAPPING mapping, which is clearly forbidden and
will do the wrong thing on various dma mapping implementations. The
fact that dma-direct uses a struct page as a cookie is an undocumented
implementation detail
- include dma-map-ops.h and use pgprot_dmacoherent despite a clear
comment documenting that this is not acceptable
- use of the VM_DMA_COHERENT for something that is not the dma-mapping
code
- use of VM_FLUSH_RESET_PERMS for vmap, while it is only supported for
vmalloc
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117085840.32356-6-quic_sibis@quicinc.com
The modem on the MSM8953 platform is similar to the modem on the MSM8996
platform in terms of set up. It differs primarily in that TZ needs to be
informed of the modem start address and pas_id.
Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220908182433.466908-8-stephan.gerhold@kernkonzept.com
Port the initialization sequence necessary for booting the modem remote
processor on the MSM8909 SoC from Qualcomm's msm-3.10 release [1].
The sequence is actually similar to the existing one for MSM8996 and
MSM8998 except that there is no separate QDSP6SS_MEM_PWR_CTL register
and most of the "memories" are enabled at once instead of sequentially.
To reuse the existing code just insert some if statements where needed
and add a configuration similar to the one from MSM8916.
[1]: 56dcedc8da
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220908182433.466908-6-stephan.gerhold@kernkonzept.com
MSM8996 follows the rest of MSS devices and requires a vote on MX and CX
power domains. Add corresponding entry to the device data.
Fixes: 4760a896be ("remoteproc: q6v5-mss: Vote for rpmh power domains")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220704162202.819051-1-dmitry.baryshkov@linaro.org
Make the MSS q6v5 remoteproc drivers implement the panic handler
that will invoke a stop to prepare the remoteprocs for post mortem
debugging.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1653396335-6295-3-git-send-email-quic_sibis@quicinc.com
Update MBA text logs location/size in IMEM to aid tools extract
them after ramdump collection. The size of the MBA text logs is
pre-determined and limited to 4K.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1653396335-6295-2-git-send-email-quic_sibis@quicinc.com
The application processor accessing the dynamically assigned metadata
region after assigning it to the remote Q6 would lead to an XPU violation.
Fix this by un-mapping the metadata region post firmware header copy. The
metadata region is freed only after the modem Q6 is done with fw header
authentication.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1652248625-990-1-git-send-email-quic_sibis@quicinc.com
In the remoteproc core, it's now possible to mark the sysfs attributes
read only on a per-instance basis, which is then used by the TI wkup M3
driver. The rproc_shutdown() interface propagates errors to the caller
and an array underflow is fixed in the debugfs interface. The
rproc_da_to_va() API is moved to the public API to allow e.g. child
rpmsg devices to acquire pointers to memory shared with the remote
processor.
The TI K3 R5F and DSP drivers gains support for attaching to instances
already started by the bootloader, aka IPC-only mode.
The Mediatek remoteproc driver gains support for the MT8186 SCP. The
driver's probe function is reordered and moved to use the devres version
of rproc_alloc() to save a few gotos. The driver's probe function is
also transitioned to use dev_err_probe() to provide better debug
support.
Support for the Qualcomm SC7280 Wireless Subsystem (WPSS) is introduced.
The Hexagon based remoteproc drivers gains support for voting for
interconnect bandwidth during launch of the remote processor. The modem
subsystem (MSS) driver gains support for probing the BAM-DMUX
driver, which provides the network interface towards the modem on a set
of older Qualcomm platforms.
In addition a number a bug fixes are introduces in the Qualcomm drivers.
Lastly Qualcomm ADSP DeviceTree binding is converted to YAML format, to
allow validation of DeviceTree source files.
-----BEGIN PGP SIGNATURE-----
iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmJDx6EbHGJqb3JuLmFu
ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FkEgQAN0rLCX4WeFFdkvErBcl
7vvkVfr8Yz8hpTT72Dx9lAuX/IwZSpIU2PaIkfhsjNOxDPodCLYz1aep/xzVyNT1
sFaQ7RSF3ejbkOJcBcrF4FuGb7ryDY839TmTOAX098I7U+kCKZG0zncBmNBpGI9+
O0yBMDcpKR8/RnrUTIb90rVnzEXrQG53yTakPXjk5Vsimb29SbkRhcrYFgF9I3/T
AwwFZiRlxQ0Q9bHz/junVJP4caRpMk2VTPBaDGaQhhnXZQQTCP+BnbtZDLj+VdfD
fpG0Puen9yqxdW5WnPfLz77vz9wGnhTTzUZeOM2cRBFOXQiP6vzOxdBi4UjT4R37
bpR4FqmxnE9EQlKuBau6OtBpCQMRKze3530EGGef+5cT3OXzWXYYMsZaJ3dkVdii
WTTd18qRgprlCB3QJBx4lsETruHSKIonZ5kmEiK3sNJDrdQdNs1OcSMiJcs6p1DP
P5eY8NW4w8+RrjSySmWDVcjUBEZkDTFiqetqMe46VCwU/8I8QKcqLHKZNw06WiD2
CU7vpxK/VEKpXU1c4dxA92uH/aKHUdx3yuigpV9GIRT67YSsqDQmOpYHc9iHBna7
PwAhD5GJo08dIpkhz/+4DIuhot6yKvWNHITHap6YcEBktZNQ8zavxUWFZRDZmgx7
/do4s7YzlvQlI/Qu407bVJFn
=lj/5
-----END PGP SIGNATURE-----
Merge tag 'rproc-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"In the remoteproc core, it's now possible to mark the sysfs attributes
read only on a per-instance basis, which is then used by the TI wkup
M3 driver.
Also, the rproc_shutdown() interface propagates errors to the caller
and an array underflow is fixed in the debugfs interface. The
rproc_da_to_va() API is moved to the public API to allow e.g. child
rpmsg devices to acquire pointers to memory shared with the remote
processor.
The TI K3 R5F and DSP drivers gains support for attaching to instances
already started by the bootloader, aka IPC-only mode.
The Mediatek remoteproc driver gains support for the MT8186 SCP. The
driver's probe function is reordered and moved to use the devres
version of rproc_alloc() to save a few gotos. The driver's probe
function is also transitioned to use dev_err_probe() to provide better
debug support.
Support for the Qualcomm SC7280 Wireless Subsystem (WPSS) is
introduced. The Hexagon based remoteproc drivers gains support for
voting for interconnect bandwidth during launch of the remote
processor. The modem subsystem (MSS) driver gains support for probing
the BAM-DMUX driver, which provides the network interface towards the
modem on a set of older Qualcomm platforms. In addition a number a bug
fixes are introduces in the Qualcomm drivers.
Lastly Qualcomm ADSP DeviceTree binding is converted to YAML format,
to allow validation of DeviceTree source files"
* tag 'rproc-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (22 commits)
remoteproc: qcom_q6v5_mss: Create platform device for BAM-DMUX
remoteproc: qcom: q6v5_wpss: Add support for sc7280 WPSS
dt-bindings: remoteproc: qcom: Add SC7280 WPSS support
dt-bindings: remoteproc: qcom: adsp: Convert binding to YAML
remoteproc: k3-dsp: Add support for IPC-only mode for all K3 DSPs
remoteproc: k3-dsp: Refactor mbox request code in start
remoteproc: k3-r5: Add support for IPC-only mode for all R5Fs
remoteproc: k3-r5: Refactor mbox request code in start
remoteproc: Change rproc_shutdown() to return a status
remoteproc: qcom: q6v5: Add interconnect path proxy vote
remoteproc: mediatek: Support mt8186 scp
dt-bindings: remoteproc: mediatek: Add binding for mt8186 scp
remoteproc: qcom_q6v5_mss: Fix some leaks in q6v5_alloc_memory_region
remoteproc: qcom_wcnss: Add missing of_node_put() in wcnss_alloc_memory_region
remoteproc: qcom: Fix missing of_node_put in adsp_alloc_memory_region
remoteproc: move rproc_da_to_va declaration to remoteproc.h
remoteproc: wkup_m3: Set sysfs_read_only flag
remoteproc: Introduce sysfs_read_only flag
remoteproc: Fix count check in rproc_coredump_write()
remoteproc: mtk_scp: Use dev_err_probe() where possible
...
The modem remoteproc on older Qualcomm SoCs (e.g. MSM8916 and MSM8974)
implements the BAM-DMUX protocol to allow access to the network data
channels of the modem. The hardware/firmware resources required to
implement the BAM-DMUX driver are described in an extra node in the
device tree (with the compatible "qcom,bam-dmux").
This node logically belongs below the modem remoteproc, so that both
control interfaces (rpmsg_wwan_ctrl) and network interfaces (bam_dmux)
have a common parent.
Unlike other child devices of the modem remoteproc, the bam-dmux device
currently does not follow the state of the remoteproc (i.e. it is not
added/removed when the remoteproc is started/stopped). However, this is
an implementation detail of the bam_dmux driver in Linux that might
change in the future.
To be flexible for future changes, create a standard platform device
specifically only for "qcom,bam-dmux", rather than populating all child
nodes. This is also more consistent with the way the other child nodes
are handled in the driver.
Note: of_platform_device_create() and of_node_put() have NULL-checks
internally, so there is no need to check if the "qcom,bam-dmux" node
actually exists in the device tree.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220228225400.146555-2-stephan@gerhold.net
The device_node pointer is returned by of_parse_phandle() or
of_get_child_by_name() with refcount incremented.
We should use of_node_put() on it when done.
This function only call of_node_put(node) when of_address_to_resource
succeeds, missing error cases.
Fixes: 278d744c46 ("remoteproc: qcom: Fix potential device node leaks")
Fixes: 051fb70fd4 ("remoteproc: qcom: Driver for the self-authenticating Hexagon v5")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220308064522.13804-1-linmq006@gmail.com
It's been observed that some firmware found in a Qualcomm SM8450 device
has the hash table in a separate .bNN file. Use the newly extracted
helper function to load this segment from the separate file, if it's
determined that the hashes are not part of the already loaded firmware.
In order to do this, the function needs access to the firmware basename
and to provide more useful error messages a struct device to associate
the errors with.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220128025513.97188-4-bjorn.andersson@linaro.org
In this function, devm_platform_ioremap_resource_byname() should be
suitable to simplify code.
Signed-off-by: zhaoxiao <long870912@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210906071147.9095-1-long870912@gmail.com
Add out of reset sequence support for modem sub-system on SC7280 SoCs.
It requires access to an additional set of qaccept registers, external
power/clk control registers and halt vq6 register to put the modem back
into reset.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631886935-14691-6-git-send-email-sibis@codeaurora.org
The power domains exposed by the AOSS QMP driver control the load state
resources linked to modem, adsp, cdsp remoteprocs. These are used to
notify the Always on Subsystem (AOSS) that a particular co-processor is
up/down. AOSS uses this information to wait for the co-processors to
suspend before starting its sleep sequence.
These co-processors enter low-power modes independent to that of the
application processor and the load state resources linked to them are
expected to remain unaltered across system suspend/resume cycles. To
achieve this behavior lets stop using the power-domains exposed by the
AOSS QMP node and replace them with generic qmp_send interface instead.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
[bjorn: Fixed up build error in q6v5_wcss_remove()]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631800770-371-5-git-send-email-sibis@codeaurora.org
Analog to the issue in the common mdt_loader code the MSS ELF loader
does not validate that p_filesz bytes will fit in the memory region and
that the loaded segments are not truncated. Fix this in the same way
as proposed for the mdt_loader.
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Fixes: 135b9e8d1c ("remoteproc: qcom_q6v5_mss: Validate modem blob firmware size before load")
Link: https://lore.kernel.org/r/20210312232002.3466791-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Failing to read the "firmware-name" DT property without informing the
developer is annoying, add some helpful debug prints.
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210312002605.3273255-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
If the pm_runtime_get_sync failed in q6v5_pds_enable when
loop (i), The unroll_pd_votes will start from (i - 1), and
it will resulted in following problems:
1) pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to pm_runtime_put_noidle will result in
reference leak.
2) Have not reset pds[i] performance state.
Then we fix it.
Fixes: 4760a896be ("remoteproc: q6v5-mss: Vote for rpmh power domains")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201102143433.143996-1-zhangqilong3@huawei.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Requesting a graceful shutdown through the shared memory state signals
will not be acked in the event that sysmon has already successfully shut
down the remote firmware. So extend the stop request API to optionally
take the remoteproc's sysmon instance and query if there's already been
a successful shutdown attempt, before doing the signal dance.
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Link: https://lore.kernel.org/r/20201122054135.802935-4-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The application processor accessing the MBA region after assigning it to
the remote Q6 would lead to an XPU violation. Fix this by un-mapping the
MBA region post firmware copy and MBA text log dumps.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/1604473422-29639-2-git-send-email-sibis@codeaurora.org
[bjorn: Renamed "ptr" to "mba_region"]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fix the sparse warnings reported by the kernel test bot by replacing
ioremap calls with memremap.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/1604473422-29639-1-git-send-email-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Newer platforms vote for necessary power domains through the power
domain subsystem. For historical reasons older platforms like MSM8916
or MSM8974 still control these as regulators.
Managing them as power domains is preferred since that allows us
to vote for corners instead of raw voltages.
Make it possible for MSM8916 and MSM8974 to manage these as power
domains. For compatibility with old device trees we still need to
support falling back to the regulators when necessary.
The way this is implemented here is that the deprecated regulators
are defined as "fallback_proxy_supply". Only if attaching the power
domains fails because they are not specified (-ENODATA) we request
and manage the fallback regulators instead.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200916104135.25085-7-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
On secure devices which support warm reset, the MBA firmware requires
access to the modem region to clear them out. Hence provide Q6 access
to this region before MBA boot. This will be a nop during a modem SSR.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200917175840.18708-1-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This introduces a new "detached" state for remote processors that are
deemed to be running at the time Linux boots and the infrastructure for
"attaching" to these. It then introduces the support for performing this
operation for the STM32 platform.
The coredump functionality is moved out from the core file and gains
support for an optional mode where the recovery phase awaits the
notification from devcoredump that the dump should be released. This
allows userspace to grab the coredump in scenarios where vmalloc space
is too low for creating a complete copy of the coredump before handing
this to devcoredump.
A new character device based interface is introduced to allow tying the
stoppage of a remote processor to the termination of a user space
process. This is useful in situations when such process provides crucial
resources/operations for the firmware running on the remote processor.
The Texas Instrument K3 driver gains support for the C66x and C71x DSPs.
Qualcomm remoteprocs gains support for stashing relocation information
in IMEM, to aid post mortem debugging and the crash notification
mechanism is generalized to be reusable in cases where loosely coupled
drivers needs to know about the status of a remote processor. One such
example is the IPA hardware block, which is jointly owned with the
modem and migrated to this improved interface.
It also introduces a number of bug fixes and debug improvements for the
Qualcomm modem remoteproc driver.
And it cleans up the inconsistent interface for remoteproc drivers to
implement power management.
-----BEGIN PGP SIGNATURE-----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=9cjt
-----END PGP SIGNATURE-----
Merge tag 'rproc-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
"This introduces a new "detached" state for remote processors that are
deemed to be running at the time Linux boots and the infrastructure
for "attaching" to these. It then introduces the support for
performing this operation for the STM32 platform.
The coredump functionality is moved out from the core file and gains
support for an optional mode where the recovery phase awaits the
notification from devcoredump that the dump should be released. This
allows userspace to grab the coredump in scenarios where vmalloc space
is too low for creating a complete copy of the coredump before handing
this to devcoredump.
A new character device based interface is introduced to allow tying
the stoppage of a remote processor to the termination of a user space
process. This is useful in situations when such process provides
crucial resources/operations for the firmware running on the remote
processor.
The Texas Instrument K3 driver gains support for the C66x and C71x
DSPs.
Qualcomm remoteprocs gains support for stashing relocation information
in IMEM, to aid post mortem debugging and the crash notification
mechanism is generalized to be reusable in cases where loosely coupled
drivers needs to know about the status of a remote processor. One such
example is the IPA hardware block, which is jointly owned with the
modem and migrated to this improved interface.
It also introduces a number of bug fixes and debug improvements for
the Qualcomm modem remoteproc driver.
And it cleans up the inconsistent interface for remoteproc drivers to
implement power management"
* tag 'rproc-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (56 commits)
remoteproc: core: Register the character device interface
remoteproc: Add remoteproc character device interface
remoteproc: kill IPA notify code
net: ipa: new notification infrastructure
remoteproc: k3-dsp: Add support for C71x DSPs
dt-bindings: remoteproc: k3-dsp: Update bindings for C71x DSPs
remoteproc: k3-dsp: Add support for L2RAM loading on C66x DSPs
remoteproc: k3-dsp: Add a remoteproc driver of K3 C66x DSPs
dt-bindings: remoteproc: Add bindings for C66x DSPs on TI K3 SoCs
remoteproc: k3: Add TI-SCI processor control helper functions
remoteproc: Introduce rproc_of_parse_firmware() helper
dt-bindings: arm: keystone: Add common TI SCI bindings
remoteproc: qcom_q6v5_mss: Remove redundant running state
remoteproc: qcom: q6v5: Update running state before requesting stop
remoteproc: qcom_q6v5_mss: Add modem debug policy support
remoteproc: qcom_q6v5_mss: Validate modem blob firmware size before load
remoteproc: qcom_q6v5_mss: Validate MBA firmware size before load
rpmsg: update documentation
remoteproc: qcom_q6v5_mss: Add MBA log extraction support
remoteproc: Add coredump debugfs entry
...
The IPA code now uses the generic remoteproc SSR notification
mechanism. This makes the original IPA notification code unused
and unnecessary, so get rid of it.
This is effectively a revert of commit d7f5f3c89c ("remoteproc:
add IPA notification to q6v5 driver").
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20200724181142.13581-3-elder@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Remove the redundant running state, as an equivalent is maintained in
the common q6v5 resource handling helpers.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200602163257.26978-2-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add modem debug policy support which will enable coredumps and live
debug support when the msadp firmware is present on secure devices.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200722201047.12975-4-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The following mem abort is observed when one of the modem blob firmware
size exceeds the allocated mpss region. Fix this by restricting the copy
size to segment size using request_firmware_into_buf before load.
Err Logs:
Unable to handle kernel paging request at virtual address
Mem abort info:
...
Call trace:
__memcpy+0x110/0x180
rproc_start+0xd0/0x190
rproc_boot+0x404/0x550
state_store+0x54/0xf8
dev_attr_store+0x44/0x60
sysfs_kf_write+0x58/0x80
kernfs_fop_write+0x140/0x230
vfs_write+0xc4/0x208
ksys_write+0x74/0xf8
...
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes: 051fb70fd4 ("remoteproc: qcom: Driver for the self-authenticating Hexagon v5")
Cc: stable@vger.kernel.org
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200722201047.12975-3-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The following mem abort is observed when the mba firmware size exceeds
the allocated mba region. MBA firmware size is restricted to a maximum
size of 1M and remaining memory region is used by modem debug policy
firmware when available. Hence verify whether the MBA firmware size lies
within the allocated memory region and is not greater than 1M before
loading.
Err Logs:
Unable to handle kernel paging request at virtual address
Mem abort info:
...
Call trace:
__memcpy+0x110/0x180
rproc_start+0x40/0x218
rproc_boot+0x5b4/0x608
state_store+0x54/0xf8
dev_attr_store+0x44/0x60
sysfs_kf_write+0x58/0x80
kernfs_fop_write+0x140/0x230
vfs_write+0xc4/0x208
ksys_write+0x74/0xf8
__arm64_sys_write+0x24/0x30
...
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes: 051fb70fd4 ("remoteproc: qcom: Driver for the self-authenticating Hexagon v5")
Cc: stable@vger.kernel.org
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200722201047.12975-2-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
On SC7180 the MBA firmware stores the bootup text logs in a 4K segment
at the beginning of the MBA region. Add support to extract the logs
which will be useful to debug mba boot/authentication issues.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200721112935.25716-3-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Change the segment dump API signature to include size and offset
arguments. Refactor the qcom_q6v5_mss driver to use these
arguments while copying the segment. Doing this lays the ground
work for "inline" coredump functionality being added in the next
patch.
Tested-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Link: https://lore.kernel.org/r/1594938035-7327-4-git-send-email-rishabhb@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
In order to land inline coredump support for mss, the dump_segment
function would need to support granularities less than the segment
size. This is achieved by replacing mask based tracking with size.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Link: https://lore.kernel.org/r/1594938035-7327-3-git-send-email-rishabhb@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
On secure devices there exists a race condition which could lock the MSS
CONFIG AHB bus thus preventing access to BOOT_STATUS register during SSR.
Switch to polling the MSS_STATUS register with an additional 10 us delay
to reliably track boot completion.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200716120514.21588-1-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Update the PIL relocation information in IMEM with information about
where the firmware for various remoteprocs are loaded.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200622191942.255460-4-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The header file linux/uio.h includes crypto/hash.h which pulls in
most of the Crypto API. Since linux/uio.h is used throughout the
kernel this means that every tiny bit of change to the Crypto API
causes the entire kernel to get rebuilt.
This patch fixes this by moving it into lib/iov_iter.c instead
where it is actually used.
This patch also fixes the ifdef to use CRYPTO_HASH instead of just
CRYPTO which does not guarantee the existence of ahash.
Unfortunately a number of drivers were relying on linux/uio.h to
provide access to linux/slab.h. This patch adds inclusions of
linux/slab.h as detected by build failures.
Also skbuff.h was relying on this to provide a declaration for
ahash_request. This patch adds a forward declaration instead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This introduces device managed versions of functions used to register
remoteproc devices, add support for remoteproc driver specific resource
control, enables remoteproc drivers to specify ELF class and machine for
coredumps. It integrates pm_runtime in the core for keeping resources
active while the remote is booted and holds a wake source while
recoverying a remote processor after a firmware crash.
It refactors the remoteproc device's allocation path to simplify the
logic, fix a few cleanup bugs and to not clone const strings onto the
heap. Debugfs code is simplifies using the DEFINE_SHOW_ATTRIBUTE and a
zero-length array is replaced with flexible-array.
A new remoteproc driver for the JZ47xx VPU is introduced, the Qualcomm
SM8250 gains support for audio, compute and sensor remoteprocs and the
Qualcomm SC7180 modem support is cleaned up and improved.
The Qualcomm glink subsystem-restart driver is merged into the main
glink driver, the Qualcomm sysmon driver is extended to properly notify
remote processors about all other remote processors' state transitions.
-----BEGIN PGP SIGNATURE-----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=4k54
-----END PGP SIGNATURE-----
Merge tag 'rproc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
"This introduces device managed versions of functions used to register
remoteproc devices, add support for remoteproc driver specific
resource control, enables remoteproc drivers to specify ELF class and
machine for coredumps. It integrates pm_runtime in the core for
keeping resources active while the remote is booted and holds a wake
source while recoverying a remote processor after a firmware crash.
It refactors the remoteproc device's allocation path to simplify the
logic, fix a few cleanup bugs and to not clone const strings onto the
heap. Debugfs code is simplifies using the DEFINE_SHOW_ATTRIBUTE and a
zero-length array is replaced with flexible-array.
A new remoteproc driver for the JZ47xx VPU is introduced, the Qualcomm
SM8250 gains support for audio, compute and sensor remoteprocs and the
Qualcomm SC7180 modem support is cleaned up and improved.
The Qualcomm glink subsystem-restart driver is merged into the main
glink driver, the Qualcomm sysmon driver is extended to properly
notify remote processors about all other remote processors' state
transitions"
* tag 'rproc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (43 commits)
remoteproc: Fix an error code in devm_rproc_alloc()
MAINTAINERS: Add myself as reviewer for Ingenic rproc driver
remoteproc: ingenic: Added remoteproc driver
remoteproc: Add support for runtime PM
dt-bindings: Document JZ47xx VPU auxiliary processor
remoteproc: wcss: Fix arguments passed to qcom_add_glink_subdev()
remoteproc: Fix and restore the parenting hierarchy for vdev
remoteproc: Fall back to using parent memory pool if no dedicated available
remoteproc: Replace zero-length array with flexible-array
remoteproc: wcss: add support for rpmsg communication
remoteproc: core: Prevent system suspend during remoteproc recovery
remoteproc: qcom_q6v5_mss: Remove unused q6v5_da_to_va function
remoteproc: qcom_q6v5_mss: map/unmap mpss segments before/after use
remoteproc: qcom_q6v5_mss: Drop accesses to MPSS PERPH register space
dt-bindings: remoteproc: qcom: Replace halt-nav with spare-regs
remoteproc: qcom: pas: Add SM8250 PAS remoteprocs
dt-bindings: remoteproc: qcom: pas: Add SM8250 remoteprocs
remoteproc: qcom_q6v5_mss: Extract mba/mpss from memory-region
dt-bindings: remoteproc: qcom: Use memory-region to reference memory
remoteproc: qcom: pas: Add SC7180 Modem support
...
Remove unsed q6v5_da_to_va function as the mss driver uses a per segment
dump function.
Tested-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200415071619.6052-2-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The application processor accessing the mpss region when the Q6 modem is
running will lead to an XPU violation. Fix this by un-mapping the mpss
segments post copy during mpss authentication and coredumps.
Tested-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200415071619.6052-1-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
7C retail devices using MSA based boot will result in a fuse combination
which will prevent accesses to MSS PERPH register space where the mpss
clocks and halt-nav reside. So drop all accesses to the MPSS PERPH
register space. Issuing HALT NAV request and turning on the mss clocks
as part of SSR will no longer be required since the modem firmware will
have the necessary fixes to ensure that there are no pending NAV DMA
transactions.
Tested-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200415145110.20624-3-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
In the absence of mba and mpss sub-child extract the mba/mpss regions
from the memory-region property.
Tested-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200421143228.8981-5-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Pass ssr_name to glink subdevice in preparation for tying glink_ssr to
the glink subdevice, rather than having its own "ssr subdevice".
Acked-by: Chris Lew <clew@codeaurora.org>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Link: https://lore.kernel.org/r/20200423003736.2027371-2-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Modify drivers which are using remoteproc coredump functionality to use
rproc_coredump_set_elf_info in order to create correct elf coredump
format.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Clement Leger <cleger@kalray.eu>
Link: https://lore.kernel.org/r/20200410102433.2672-3-cleger@kalray.eu
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
If an error occurs in q6v5_probe() after the proxy power domains
are attached, but before qcom_add_ipa_notify_subdev() is called,
qcom_remove_ipa_notify_subdev() is called in the error path, which
is a bug. Fix this by having that call be reached through a
different label.
Additionally, if qcom_add_sysmon_subdev() returns an error, the
subdevs that had already been added will not be properly removed.
Fix this by having the added subdevs (including the IPA notify one)
be removed in this case.
Finally, arrange for the sysmon subdev to be removed before the rest
in the event rproc_add() returns an error.
Have cleanup activity done in q6v5_remove() be done in the reverse
order they are set up in q6v5_probe() (the same order they're done
in the q6v5_probe() error path). Use a local variable for the
remoteproc pointer, which is used repeatedly.
Remove errant semicolons at the end of two function blocks.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20200403175005.17130-4-elder@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
If looking up the DT "firmware-name" property fails in q6v6_probe(),
the function returns without freeing the remoteproc structure
that has been allocated. Fix this by jumping to the free_rproc
label, which takes care of this.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20200403175005.17130-3-elder@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This introduces a range of improvements to the OMAP remoeteproc driver;
among other things adding devicetree, suspend/resume and watchdog
support, and adds support the remoteprocs in the DRA7xx SoC.
It introduces support for 64-bit firmware, extends the ELF loader to
support this and fixes for a number of race conditions in the recovery
handling.
It introduces a generic mechanism to allow remoteproc drivers to sync
state with remote processors during a panic, and uses this to prepare
Qualcomm remote processors for post mortem analysis.
Finally it introduces fixes to cleanly recover from crashes in the modem
firmware on production Qualcomm devices.
-----BEGIN PGP SIGNATURE-----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=5Q77
-----END PGP SIGNATURE-----
Merge tag 'rproc-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
- a range of improvements to the OMAP remoeteproc driver; among other
things adding devicetree, suspend/resume and watchdog support, and
adds support the remoteprocs in the DRA7xx SoC
- support for 64-bit firmware, extends the ELF loader to support this
and fixes for a number of race conditions in the recovery handling
- a generic mechanism to allow remoteproc drivers to sync state with
remote processors during a panic, and uses this to prepare Qualcomm
remote processors for post mortem analysis
- fixes to cleanly recover from crashes in the modem firmware on
production Qualcomm devices
* tag 'rproc-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (37 commits)
remoteproc/omap: Switch to SPDX license identifiers
remoteproc/omap: Add watchdog functionality for remote processors
remoteproc/omap: Report device exceptions and trigger recovery
remoteproc/omap: Add support for runtime auto-suspend/resume
remoteproc/omap: Add support for system suspend/resume
remoteproc/omap: Request a timer(s) for remoteproc usage
remoteproc/omap: Check for undefined mailbox messages
remoteproc/omap: Remove the platform_data header
remoteproc/omap: Add support for DRA7xx remote processors
remoteproc/omap: Initialize and assign reserved memory node
remoteproc/omap: Add the rproc ops .da_to_va() implementation
remoteproc/omap: Add support to parse internal memories from DT
remoteproc/omap: Add a sanity check for DSP boot address alignment
remoteproc/omap: Add device tree support
dt-bindings: remoteproc: Add OMAP remoteproc bindings
remoteproc: qcom: Introduce panic handler for PAS and ADSP
remoteproc: qcom: q6v5: Add common panic handler
remoteproc: Introduce "panic" callback in ops
remoteproc: Traverse rproc_list under RCU read lock
remoteproc: Fix NULL pointer dereference in rproc_virtio_notify
...
Linus Torvalds