Add mcore_booted boot parameter which could simplify AMP clock
management. To i.MX93, there is CCM(clock control Module) to generate
clock root clock, anatop(analog PLL module) to generate PLL, and LPCG
(clock gating) to gate clocks to peripherals. As below:
anatop->ccm->lpcg->peripheral
Linux handles the clock management and the auxiliary core is under
control of Linux. Although there is per hardware domain control for LPCG
and CCM, auxiliary core normally only use LPCG hardware domain control
to avoid linux gate off the clk to peripherals and leave CCM ana anatop
to Linux.
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230403095300.3386988-6-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
The CCM ROOT AUTHEN register WHITE_LIST indicate:
Each bit in this field represent for one domain. Bit16~Bit31 represent
for DOMAIN0~DOMAIN15 respectively. Only corresponding bit of the domains
is set to 1 can change the registers of this Clock Root.
i.MX93 DID is 3, so if BIT(3 + WHITE_LIST_SHIFT) is 0, the clk should be
set to read only. To make the imx93_clk_composite_flags be reusable,
add a new parameter named did(domain id);
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20220830033137.4149542-5-peng.fan@oss.nxp.com
i.MX93 CCM ROOT STAT register has a SLICE_BUSY bit:
indication for clock generation logic is applying new setting.
0b - Clock generation logic is not busy.
1b - Clock generation logic is applying new setting.
So when set parent/rate/gate, need check this bit.
Introduce specific ops to do the work.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20220830033137.4149542-4-peng.fan@oss.nxp.com
i.MX93 CCM ROOT clock has a mux, gate and divider in one register, here
is to combine all these into one composite clk and simplify clk tree.
i.MX93 CCM is a new IP compared with i.MX8M, so introduce a new file.
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220228020908.2810346-4-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Peng Fan