Pull second vfs pile from Al Viro:
"The stuff in there: fsfreeze deadlock fixes by Jan (essentially, the
deadlock reproduced by xfstests 068), symlink and hardlink restriction
patches, plus assorted cleanups and fixes.
Note that another fsfreeze deadlock (emergency thaw one) is *not*
dealt with - the series by Fernando conflicts a lot with Jan's, breaks
userland ABI (FIFREEZE semantics gets changed) and trades the deadlock
for massive vfsmount leak; this is going to be handled next cycle.
There probably will be another pull request, but that stuff won't be
in it."
Fix up trivial conflicts due to unrelated changes next to each other in
drivers/{staging/gdm72xx/usb_boot.c, usb/gadget/storage_common.c}
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits)
delousing target_core_file a bit
Documentation: Correct s_umount state for freeze_fs/unfreeze_fs
fs: Remove old freezing mechanism
ext2: Implement freezing
btrfs: Convert to new freezing mechanism
nilfs2: Convert to new freezing mechanism
ntfs: Convert to new freezing mechanism
fuse: Convert to new freezing mechanism
gfs2: Convert to new freezing mechanism
ocfs2: Convert to new freezing mechanism
xfs: Convert to new freezing code
ext4: Convert to new freezing mechanism
fs: Protect write paths by sb_start_write - sb_end_write
fs: Skip atime update on frozen filesystem
fs: Add freezing handling to mnt_want_write() / mnt_drop_write()
fs: Improve filesystem freezing handling
switch the protection of percpu_counter list to spinlock
nfsd: Push mnt_want_write() outside of i_mutex
btrfs: Push mnt_want_write() outside of i_mutex
fat: Push mnt_want_write() outside of i_mutex
...
The only missing piece to make freezing work reliably with ext2 is to
stop iput() of unlinked inode from deleting the inode on frozen filesystem.
So add a necessary protection to ext2_evict_inode().
We also provide appropriate ->freeze_fs and ->unfreeze_fs functions.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull misc udf, ext2, ext3, and isofs fixes from Jan Kara:
"Assorted, mostly trivial, fixes for udf, ext2, ext3, and isofs. I'm
on vacation and scarcely checking email since we are expecting baby
any day now but these fixes should be safe to go in and I don't want
to delay them unnecessarily."
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: avoid info leak on export
isofs: avoid info leak on export
udf: Improve table length check to avoid possible overflow
ext3: Check return value of blkdev_issue_flush()
jbd: Check return value of blkdev_issue_flush()
udf: Do not decrement i_blocks when freeing indirect extent block
udf: Fix memory leak when mounting
ext2: cleanup the confused goto label
UDF: Remove unnecessary variable "offset" from udf_fill_inode
udf: stop using s_dirt
ext3: force ro mount if ext3_setup_super() fails
quota: fix checkpatch.pl warning by replacing <asm/uaccess.h> with <linux/uaccess.h>
Since the moment writes to quota files are using block device page cache and
space for quota structures is reserved at the moment they are first accessed we
have no reason to sync quota before inode writeback. In fact this order is now
only harmful since quota information can easily change during inode writeback
(either because conversion of delayed-allocated extents or simply because of
allocation of new blocks for simple filesystems not using page_mkwrite).
So move syncing of quota information after writeback of inodes into ->sync_fs
method. This way we do not have to use ->quota_sync callback which is primarily
intended for use by quotactl syscall anyway and we get rid of calling
->sync_fs() twice unnecessarily. We skip quota syncing for OCFS2 since it does
proper quota journalling in all cases (unlike ext3, ext4, and reiserfs which
also support legacy non-journalled quotas) and thus there are no dirty quota
structures.
CC: "Theodore Ts'o" <tytso@mit.edu>
CC: Joel Becker <jlbec@evilplan.org>
CC: reiserfs-devel@vger.kernel.org
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Acked-by: Dave Kleikamp <shaggy@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cleanup the confused goto label, since the big lock has been removed.
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Pull ext2, ext3 and quota fixes from Jan Kara:
"Interesting bits are:
- removal of a special i_mutex locking subclass (I_MUTEX_QUOTA) since
quota code does not need i_mutex anymore in any unusual way.
- backport (from ext4) of a fix of a checkpointing bug (missing cache
flush) that could lead to fs corruption on power failure
The rest are just random small fixes & cleanups."
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext2: trivial fix to comment for ext2_free_blocks
ext2: remove the redundant comment for ext2_export_ops
ext3: return 32/64-bit dir name hash according to usage type
quota: Get rid of nested I_MUTEX_QUOTA locking subclass
quota: Use precomputed value of sb_dqopt in dquot_quota_sync
ext2: Remove i_mutex use from ext2_quota_write()
reiserfs: Remove i_mutex use from reiserfs_quota_write()
ext4: Remove i_mutex use from ext4_quota_write()
ext3: Remove i_mutex use from ext3_quota_write()
quota: Fix double lock in add_dquot_ref() with CONFIG_QUOTA_DEBUG
jbd: Write journal superblock with WRITE_FUA after checkpointing
jbd: protect all log tail updates with j_checkpoint_mutex
jbd: Split updating of journal superblock and marking journal empty
ext2: do not register write_super within VFS
ext2: Remove s_dirt handling
ext2: write superblock only once on unmount
ext3: update documentation with barrier=1 default
ext3: remove max_debt in find_group_orlov()
jbd: Refine commit writeout logic
The comment is outdated and isn't particularly informative anyway - NULL
meaning the default behavior is very common in kernel. And we really set about
half of entries. So remove the whole comment for ext2_export_ops.
Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
We don't need i_mutex in ext2_quota_write() because writes to quota file
are serialized by dqio_mutex anyway. Changes to quota files outside of quota
code are forbidded and enforced by NOATIME and IMMUTABLE bits.
Signed-off-by: Jan Kara <jack@suse.cz>
Jan Kara removed 'sb->s_dirt' VFS flag references, so we do not need to
register the ext2 'ext2_write_super()' method in the VFS superblock operations,
because 'sb->s_dirt' won't be ever set to 1 and VFS won't ever call
'->write_super()' anyway. Thus, remove the method.
Tested using xfstests.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Places which modify superblock feature / state fields mark the superblock
buffer dirty so it is written out by flusher thread. Thus there's no need to
set s_dirt there.
The only other fields changing in the superblock are the numbers of free
blocks, free inodes and s_wtime. There's no real need to write (or even
compute) these periodically. Free blocks / inodes counters are recomputed on
every mount from group counters anyway and value of s_wtime is only
informational and imprecise anyway. So it should be enough to write these
opportunistically on mount, remount, umount, and sync_fs times.
Signed-off-by: Jan Kara <jack@suse.cz>
Currently on unmount if we are mounted R/W, we first write the superblock to
the media if it is dirty, and then write it again, which is not optimal. This
patch makes ext2 write the superblock on unmount less times.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
New field of struct super_block - ->s_max_links. Maximal allowed
value of ->i_nlink or 0; in the latter case all checks still need
to be done in ->link/->mkdir/->rename instances. Note that this
limit applies both to directoris and to non-directories.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext2/3/4: delete unneeded includes of module.h
ext{3,4}: Fix potential race when setversion ioctl updates inode
udf: Mark LVID buffer as uptodate before marking it dirty
ext3: Don't warn from writepage when readonly inode is spotted after error
jbd: Remove j_barrier mutex
reiserfs: Force inode evictions before umount to avoid crash
reiserfs: Fix quota mount option parsing
udf: Treat symlink component of type 2 as /
udf: Fix deadlock when converting file from in-ICB one to normal one
udf: Cleanup calling convention of inode_getblk()
ext2: Fix error handling on inode bitmap corruption
ext3: Fix error handling on inode bitmap corruption
ext3: replace ll_rw_block with other functions
ext3: NULL dereference in ext3_evict_inode()
jbd: clear revoked flag on buffers before a new transaction started
ext3: call ext3_mark_recovery_complete() when recovery is really needed
Delete any instances of include module.h that were not strictly
required. In the case of ext2, the declaration of MODULE_LICENSE
etc. were in inode.c but the module_init/exit were in super.c, so
relocate the MODULE_LICENCE/AUTHOR block to super.c which makes it
consistent with ext3 and ext4 at the same time.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Seeing that just about every destructor got that INIT_LIST_HEAD() copied into
it, there is no point whatsoever keeping this INIT_LIST_HEAD in inode_init_once();
the cost of taking it into inode_init_always() will be negligible for pipes
and sockets and negative for everything else. Not to mention the removal of
boilerplate code from ->destroy_inode() instances...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When ext2 mounts a filesystem, it attempts to set the block device
blocksize with a call to sb_set_blocksize, which can fail for
several reasons. The current failure message in ext2 prints:
EXT2-fs (loop1): error: blocksize is too small
which is not correct in all cases. This can be demonstrated
by creating a filesystem with
# mkfs.ext2 -b 8192
on a 4k page system, and attempting to mount it.
Change the error message to a more generic:
EXT2-fs (loop1): bad blocksize 8192
to match the error message in ext3.
Signed-off-by: Robin Dong <sanbai@taobao.com>
Reviewed-by: Coly Li <bosong.ly@taobao.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
ext2: Resolve 'dereferencing pointer to incomplete type' when enabling EXT2_XATTR_DEBUG
ext3: Remove redundant unlikely()
ext2: Remove redundant unlikely()
ext3: speed up file creates by optimizing rec_len functions
ext2: speed up file creates by optimizing rec_len functions
ext3: Add more journal error check
ext3: Add journal error check in resize.c
quota: Use %pV and __attribute__((format (printf in __quota_error and fix fallout
ext3: Add FITRIM handling
ext3: Add batched discard support for ext3
ext3: Add journal error check into ext3_rename()
ext3: Use search_dirblock() in ext3_dx_find_entry()
ext3: Avoid uninitialized memory references with a corrupted htree directory
ext3: Return error code from generic_check_addressable
ext3: Add journal error check into ext3_delete_entry()
ext3: Add error check in ext3_mkdir()
fs/ext3/super.c: Use printf extension %pV
fs/ext2/super.c: Use printf extension %pV
ext3: don't update sb journal_devnum when RO dev
RCU free the struct inode. This will allow:
- Subsequent store-free path walking patch. The inode must be consulted for
permissions when walking, so an RCU inode reference is a must.
- sb_inode_list_lock to be moved inside i_lock because sb list walkers who want
to take i_lock no longer need to take sb_inode_list_lock to walk the list in
the first place. This will simplify and optimize locking.
- Could remove some nested trylock loops in dcache code
- Could potentially simplify things a bit in VM land. Do not need to take the
page lock to follow page->mapping.
The downsides of this is the performance cost of using RCU. In a simple
creat/unlink microbenchmark, performance drops by about 10% due to inability to
reuse cache-hot slab objects. As iterations increase and RCU freeing starts
kicking over, this increases to about 20%.
In cases where inode lifetimes are longer (ie. many inodes may be allocated
during the average life span of a single inode), a lot of this cache reuse is
not applicable, so the regression caused by this patch is smaller.
The cache-hot regression could largely be avoided by using SLAB_DESTROY_BY_RCU,
however this adds some complexity to list walking and store-free path walking,
so I prefer to implement this at a later date, if it is shown to be a win in
real situations. I haven't found a regression in any non-micro benchmark so I
doubt it will be a problem.
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
Using %pV reduces the number of printk calls and
eliminates any possible message interleaving from
other printk calls.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jan Kara <jack@suse.cz>
It's pointless - we *do* have busy inodes (root directory,
for one), so that call will fail and attempt to change
XIP flag will be ignored.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The BKL is still used in ext2_put_super(), ext2_fill_super(), ext2_sync_fs()
ext2_remount() and ext2_write_inode(). From these calls ext2_put_super(),
ext2_fill_super() and ext2_remount() are protected against each other by
the struct super_block s_umount rw semaphore. The call in ext2_write_inode()
could only protect the modification of the ext2_sb_info through
ext2_update_dynamic_rev() against concurrent ext2_sync_fs() or ext2_remount().
ext2_fill_super() and ext2_put_super() can be left out because you need a
valid filesystem reference in all three cases, which you do not have when
you are one of these functions.
If the BKL is only protecting the modification of the ext2_sb_info it can
safely be removed since this is protected by the struct ext2_sb_info s_lock.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch is a preparation necessary to remove the BKL from do_new_mount().
It explicitly adds calls to lock_kernel()/unlock_kernel() around
get_sb/fill_super operations for filesystems that still uses the BKL.
I've read through all the code formerly covered by the BKL inside
do_kern_mount() and have satisfied myself that it doesn't need the BKL
any more.
do_kern_mount() is already called without the BKL when mounting the rootfs
and in nfsctl. do_kern_mount() calls vfs_kern_mount(), which is called
from various places without BKL: simple_pin_fs(), nfs_do_clone_mount()
through nfs_follow_mountpoint(), afs_mntpt_do_automount() through
afs_mntpt_follow_link(). Both later functions are actually the filesystems
follow_link inode operation. vfs_kern_mount() is calling the specified
get_sb function and lets the filesystem do its job by calling the given
fill_super function.
Therefore I think it is safe to push down the BKL from the VFS to the
low-level filesystems get_sb/fill_super operation.
[arnd: do not add the BKL to those file systems that already
don't use it elsewhere]
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Christoph Hellwig <hch@infradead.org>
Follow the dquot_* style used elsewhere in dquot.c.
[Jan Kara: Fixed up missing conversion of ext2]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Only set the quota operation vectors if the filesystem actually supports
quota instead of doing it for all filesystems in alloc_super().
[Jan Kara: Export dquot_operations and vfs_quotactl_ops]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Currently the VFS calls into the quotactl interface for unmounting
filesystems. This means filesystems with their own quota handling
can't easily distinguish between user-space originating quotaoff
and an unount. Instead move the responsibily of the unmount handling
into the filesystem to be consistent with all other dquot handling.
Note that we do call dquot_disable a lot later now, e.g. after
a sync_filesystem. But this is fine as the quota code does all its
writes via blockdev's mapping and that is synced even later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Instead of having wrappers in the VFS namespace export the dquot_suspend
and dquot_resume helpers directly. Also rename vfs_quota_disable to
dquot_disable while we're at it.
[Jan Kara: Moved dquot_suspend to quotaops.h and made it inline]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Currently do_remount_sb calls into the dquot code to tell it about going
from rw to ro and ro to rw. Move this code into the filesystem to
not depend on the dquot code in the VFS - note ocfs2 already ignores
these calls and handles remount by itself. This gets rid of overloading
the quotactl calls and allows to unify the VFS and XFS codepaths in
that area later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
The BKL is still used in ext2_put_super(), ext2_fill_super(), ext2_sync_fs()
ext2_remount() and ext2_write_inode(). From these calls ext2_put_super(),
ext2_fill_super() and ext2_remount() are protected against each other by
the struct super_block s_umount rw semaphore. The call in ext2_write_inode()
could only protect the modification of the ext2_sb_info through
ext2_update_dynamic_rev() against concurrent ext2_sync_fs() or ext2_remount().
ext2_fill_super() and ext2_put_super() can be left out because you need a
valid filesystem reference in all three cases, which you do not have when
you are one of these functions.
If the BKL is only protecting the modification of the ext2_sb_info it can
safely be removed since this is protected by the struct ext2_sb_info s_lock.
Signed-off-by: Jan Blunck <jblunck@suse.de>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jan Kara <jack@suse.cz>
Add a spinlock that protects against concurrent modifications of
s_mount_state, s_blocks_last, s_overhead_last and the content of the
superblock's buffer pointed to by sbi->s_es. The spinlock is now used in
ext2_xattr_update_super_block() which was setting the
EXT2_FEATURE_COMPAT_EXT_ATTR flag on the superblock without protection
before. Likewise the spinlock is used in ext2_show_options() to have a
consistent view of the mount options.
This is a preparation patch for removing the BKL from ext2 in the next
patch.
Signed-off-by: Jan Blunck <jblunck@suse.de>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jan Kara <jack@suse.cz>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Jan Kara <jack@suse.cz>
Move ext2_write_super() out of ext2_setup_super() as a preparation for the
next patch that adds a new lock for superblock fields.
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Both function originally did similar things except that ext2_sync_super()
is returning after the call to sync_dirty_buffer(sbh). Therefore this
patch adds a wait flag to tell ext2_sync_super() if it has to call
sync_dirty_buffer() to wait for in-progress I/O to finish.
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Depending in the state (valid or unchecked) of the filesystem either
ext2_sync_super() or ext2_commit_super() is called. If the filesystem is
currently valid (it is checked), we first mark it unchecked and afterwards
duplicate the work that ext2_sync_super() is doing later. Therefore this
patch removes the duplicate code and calls ext2_sync_super() directly after
marking the filesystem unchecked.
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Jan Kara <jack@suse.cz>
This is probably a typo since the write time should actually be updated by
ext2_sync_fs() instead of the mount time.
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Jan Kara <jack@suse.cz>
ext2_sync_fs() used to duplicate the code from ext2_clear_super_error().
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Get rid of the drop dquot operation - it is now always called from
the filesystem and if a filesystem really needs it's own (which none
currently does) it can just call into it's own routine directly.
Rename the now static low-level dquot_drop helper to __dquot_drop
and vfs_dq_drop to dquot_drop to have a consistent namespace.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Currently clear_inode calls vfs_dq_drop directly. This means
we tie the quota code into the VFS. Get rid of that and make the
filesystem responsible for the drop inside the ->clear_inode
superblock operation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
This fixes a WARN backtrace in mark_buffer_dirty() that occurs during
unmount when a USB or floppy device is removed. I reported this a kernel
regression, but looks like it might have been there for longer
than that.
The super block update from a previous operation has marked the buffer
as in error, and the flag has to be cleared before doing the update.
(Similar code already exists in ext4).
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Add a ->sync_fs method for data integrity syncs, and reimplement
->write_super ontop of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Move BKL into ->put_super from the only caller. A couple of
filesystems had trivial enough ->put_super (only kfree and NULLing of
s_fs_info + stuff in there) to not get any locking: coda, cramfs, efs,
hugetlbfs, omfs, qnx4, shmem, all others got the full treatment. Most
of them probably don't need it, but I'd rather sort that out individually.
Preferably after all the other BKL pushdowns in that area.
[AV: original used to move lock_super() down as well; these changes are
removed since we don't do lock_super() at all in generic_shutdown_super()
now]
[AV: fuse, btrfs and xfs are known to need no damn BKL, exempt]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Linus Torvalds