The main kdb command parser only handles CR (ASCII 13 AKA '\r') today,
but not LF (ASCII 10 AKA '\n'). That means that the kdb command parser
can handle terminals that send just CR or that send CR+LF but can't
handle terminals that send just LF.
The fact that kdb didn't handle LF in the command parser tripped up a
tool I tried to use with it. Specifically, I was trying to send a
command to my device to resume it from kdb using a ChromeOS tool like:
dut-control cpu_uart_cmd:"g"
That tool only terminates lines with LF, not CR+LF.
Arguably the ChromeOS tool should be fixed. After all, officially kdb
seems to be designed such that CR+LF is the official line ending
transmitted over the wire and that internally a line ending is just
'\n' (LF). Some evidence:
* uart_poll_put_char(), which is used by kdb, notices a '\n' and
converts it to '\r\n'.
* kdb functions specifically use '\r' to get a carriage return without
a newline. You can see this in the pager where kdb will write a '\r'
and then write over the pager prompt.
However, all that being said there's no real harm in accepting LF as a
command terminator in the kdb parser and doing so seems like it would
improve compatibility. After this, I'd expect that things would work
OK-ish with a remote terminal that used any of CR, CR+LF, or LF as a
line ending. Someone using CR as a line ending might get some ugliness
where kdb wasn't able to overwrite the last line, but basic commands
would work. Someone using just LF as a line ending would probably also
work OK.
A few other notes:
- It can be noted that "bash" running on an "agetty" handles LF as a
line termination with no complaints.
- Historically, kdb's "pager" actually handled either CR or LF fine. A
very quick inspection would make one think that kdb's pager actually
could have paged down two lines instead of one for anyone using
CR+LF, but this is generally avoided because of kdb_input_flush().
- Conceivably one could argue that some of this special case logic
belongs in uart_poll_get_char() since uart_poll_put_char() handles
the '\n' => '\r\n' conversion. I would argue that perhaps we should
eventually do the opposite and move the '\n' => '\r\n' out of
uart_poll_put_char(). Having that conversion at such a low level
could interfere if we ever want to transfer binary data. In
addition, if we truly made uart_poll_get_char() the inverse of
uart_poll_put_char() it would convert back to '\n' and (ironically)
kdb's parser currently only looks for '\r' to find the end of a
command.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230628125612.1.I5cc6c3d916195f5bcfdf5b75d823f2037707f5dc@changeid
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
It is impossible to use skb_frag_t in the tracing program. Resolve typedefs
when walking structs.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20230626212522.2414485-1-sdf@google.com
- swiotlb cleanups (Petr Tesarik)
- use kvmalloc_array (gaoxu)
- a small step towards removing is_swiotlb_active (Christoph Hellwig)
- fix a Kconfig typo Sui Jingfeng)
-----BEGIN PGP SIGNATURE-----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=yYCS
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.5-2023-06-28' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- swiotlb cleanups (Petr Tesarik)
- use kvmalloc_array (gaoxu)
- a small step towards removing is_swiotlb_active (Christoph Hellwig)
- fix a Kconfig typo Sui Jingfeng)
* tag 'dma-mapping-6.5-2023-06-28' of git://git.infradead.org/users/hch/dma-mapping:
drm/nouveau: stop using is_swiotlb_active
swiotlb: use the atomic counter of total used slabs if available
swiotlb: remove unused field "used" from struct io_tlb_mem
dma-remap: use kvmalloc_array/kvfree for larger dma memory remap
dma-mapping: fix a Kconfig typo
Linus, included in this pull request is just a minor fix which
Matthieu Baerts noted I had not picked up. I adjusted the Fixes
commit ID to reflect the latest tree.
-----BEGIN PGP SIGNATURE-----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=Tyyn
-----END PGP SIGNATURE-----
Merge tag 'sysctl-6.5-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl fix from Luis Chamberlain:
"A missed minor fix which Matthieu Baerts noted I had not picked up"
* tag 'sysctl-6.5-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
sysctl: fix unused proc_cap_handler() function warning
The user events write currently returns the size of what was suppose to be
written when tracing is disabled and nothing was written. Instead, behave like
trace_marker and return -EBADF, as that is what is returned if a file is opened
for read only, and a write is performed on it. Writing to the buffer
that is disabled is like trying to write to a file opened for read
only, as the buffer still can be read, but just not written to.
This also includes test cases for this use case
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZJxLzRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qs9eAP0ZRDempFNyMhi+pfENtwv65CHxRX/3
3s1Lmt04oqwXfgD/dCfojrVAd++kpq3p9cGxJYWuNiM4s47mlD8VLgQ7AAY=
=aZ8/
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.4-rc7-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix user event write on buffer disabled.
The user events write currently returns the size of what was supposed
to be written when tracing is disabled and nothing was written.
Instead, behave like trace_marker and return -EBADF, as that is what
is returned if a file is opened for read only, and a write is
performed on it. Writing to the buffer that is disabled is like trying
to write to a file opened for read only, as the buffer still can be
read, but just not written to.
This also includes test cases for this use case"
* tag 'trace-v6.4-rc7-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
selftests/user_events: Add test cases when event is disabled
selftests/user_events: Enable the event before write_fault test in ftrace self-test
tracing/user_events: Fix incorrect return value for writing operation when events are disabled
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmSZtjsACgkQu+CwddJF
iJqCTwf/XVhmAD7zMOj6g1aak5oHNZDRG5jufM5UNXmiWjCWT3w4DpltrJkz0PPm
mg3Ac5fjNUqesZ1SGtUbvoc363smroBrRudGEFrsUhqBcpR+S4fSneoDk+xqMypf
VLXP/8kJlFEBGMiR7ouAWnR4+u6JgY4E8E8JIPNzao5KE/L1lD83nY+Usjc/01ek
oqMyYVFRfncsGjGJXc5fOOTTCj768mRroF0sLmEegIonnwQkSHE7HWJ/nyaVraDV
bomnTIgMdVIDqharin08ZPIM7qBIWM09Uifaf0lIs6fIA94pQP+5Ko3mum2P/S+U
ON/qviSrlNgRXoHPJ3hvPHdfEU9cSg==
=1d0v
-----END PGP SIGNATURE-----
Merge tag 'slab-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- SLAB deprecation:
Following the discussion at LSF/MM 2023 [1] and no objections, the
SLAB allocator is deprecated by renaming the config option (to make
its users notice) to CONFIG_SLAB_DEPRECATED with updated help text.
SLUB should be used instead. Existing defconfigs with CONFIG_SLAB are
also updated.
- SLAB_NO_MERGE kmem_cache flag (Jesper Dangaard Brouer):
There are (very limited) cases where kmem_cache merging is
undesirable, and existing ways to prevent it are hacky. Introduce a
new flag to do that cleanly and convert the existing hacky users.
Btrfs plans to use this for debug kernel builds (that use case is
always fine), networking for performance reasons (that should be very
rare).
- Replace the usage of weak PRNGs (David Keisar Schmidt):
In addition to using stronger RNGs for the security related features,
the code is a bit cleaner.
- Misc code cleanups (SeongJae Parki, Xiongwei Song, Zhen Lei, and
zhaoxinchao)
Link: https://lwn.net/Articles/932201/ [1]
* tag 'slab-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slab_common: use SLAB_NO_MERGE instead of negative refcount
mm/slab: break up RCU readers on SLAB_TYPESAFE_BY_RCU example code
mm/slab: add a missing semicolon on SLAB_TYPESAFE_BY_RCU example code
mm/slab_common: reduce an if statement in create_cache()
mm/slab: introduce kmem_cache flag SLAB_NO_MERGE
mm/slab: rename CONFIG_SLAB to CONFIG_SLAB_DEPRECATED
mm/slab: remove HAVE_HARDENED_USERCOPY_ALLOCATOR
mm/slab_common: Replace invocation of weak PRNG
mm/slab: Replace invocation of weak PRNG
slub: Don't read nr_slabs and total_objects directly
slub: Remove slabs_node() function
slub: Remove CONFIG_SMP defined check
slub: Put objects_show() into CONFIG_SLUB_DEBUG enabled block
slub: Correct the error code when slab_kset is NULL
mm/slab: correct return values in comment for _kmem_cache_create()
Since usermodehelper_table() is marked static now, we get a
warning about it being unused when SYSCTL is disabled:
kernel/umh.c:497:12: error: 'proc_cap_handler' defined but not used [-Werror=unused-function]
Just move it inside of the same #ifdef.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Fixes: 861dc0b464 ("sysctl: move umh sysctl registration to its own file")
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
[mcgrof: adjust new commit ID for Fixes tag]
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
The kdb_kbd_cleanup_state() is called from another file through
the kdb_private.h file, but that is not included before the
definition, causing a W=1 warning:
kernel/debug/kdb/kdb_keyboard.c:198:6: error: no previous prototype for 'kdb_kbd_cleanup_state' [-Werror=missing-prototypes]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230517124802.929751-1-arnd@kernel.org
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
The -target option has been deprecated since clang 3.4 in 2013. Therefore, use
the preferred --target=bpf form instead. This also matches how we use --target=
in scripts/Makefile.clang.
Signed-off-by: Fangrui Song <maskray@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: 274b6f0c87
Link: https://lore.kernel.org/bpf/20230624001856.1903733-1-maskray@google.com
Although the desired size of the SWIOTLB memory pool is increased in
swiotlb_adjust_nareas() to match the number of areas, the actual allocation
may be smaller, which may require reducing the number of areas.
For example, Xen uses swiotlb_init_late(), which in turn uses the page
allocator. On x86, page size is 4 KiB and MAX_ORDER is 10 (1024 pages),
resulting in a maximum memory pool size of 4 MiB. This corresponds to 2048
slots of 2 KiB each. The minimum area size is 128 (IO_TLB_SEGSIZE),
allowing at most 2048 / 128 = 16 areas.
If num_possible_cpus() is greater than the maximum number of areas, areas
are smaller than IO_TLB_SEGSIZE and contiguous groups of free slots will
span multiple areas. When allocating and freeing slots, only one area will
be properly locked, causing race conditions on the unlocked slots and
ultimately data corruption, kernel hangs and crashes.
Fixes: 20347fca71 ("swiotlb: split up the global swiotlb lock")
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The number of areas defaults to the number of possible CPUs. However, the
total number of slots may have to be increased after adjusting the number
of areas. Consequently, the number of areas must be determined before
allocating the memory pool. This is even explained with a comment in
swiotlb_init_remap(), but swiotlb_init_late() adjusts the number of areas
after slots are already allocated. The areas may end up being smaller than
IO_TLB_SEGSIZE, which breaks per-area locking.
While fixing swiotlb_init_late(), move all relevant comments before the
definition of swiotlb_adjust_nareas() and convert them to kernel-doc.
Fixes: 20347fca71 ("swiotlb: split up the global swiotlb lock")
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Core
----
- Rework the sendpage & splice implementations. Instead of feeding
data into sockets page by page extend sendmsg handlers to support
taking a reference on the data, controlled by a new flag called
MSG_SPLICE_PAGES. Rework the handling of unexpected-end-of-file
to invoke an additional callback instead of trying to predict what
the right combination of MORE/NOTLAST flags is.
Remove the MSG_SENDPAGE_NOTLAST flag completely.
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid.
- Enable socket busy polling with CONFIG_RT.
- Improve reliability and efficiency of reporting for ref_tracker.
- Auto-generate a user space C library for various Netlink families.
Protocols
---------
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2].
- Use per-VMA locking for "page-flipping" TCP receive zerocopy.
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags.
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative.
- Create a new MPTCP getsockopt to retrieve all info (MPTCP_FULL_INFO).
- Avoid waking up applications using TLS sockets until we have
a full record.
- Allow using kernel memory for protocol ioctl callbacks, paving
the way to issuing ioctls over io_uring.
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address.
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch.
- PPPoE: make number of hash bits configurable.
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig).
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge).
- Support matching on Connectivity Fault Management (CFM) packets.
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug.
- HSR: don't enable promiscuous mode if device offloads the proto.
- Support active scanning in IEEE 802.15.4.
- Continue work on Multi-Link Operation for WiFi 7.
BPF
---
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used,
or in fact passing the verifier at all for complex programs,
especially those using open-coded iterators.
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what
the output buffer *should* be, without writing anything.
- Accept dynptr memory as memory arguments passed to helpers.
- Add routing table ID to bpf_fib_lookup BPF helper.
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands.
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only).
- Show target_{obj,btf}_id in tracing link fdinfo.
- Addition of several new kfuncs (most of the names are self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter
---------
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value.
- Increase ip_vs_conn_tab_bits range for 64BIT builds.
- Allow updating size of a set.
- Improve NAT tuple selection when connection is closing.
Driver API
----------
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out).
- Support configuring rate selection pins of SFP modules.
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines.
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer.
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio).
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message.
- Split devlink instance and devlink port operations.
New hardware / drivers
----------------------
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers
-------
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is
a variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split
the different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and
Enhanced MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=9i4I
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking changes from Jakub Kicinski:
"WiFi 7 and sendpage changes are the biggest pieces of work for this
release. The latter will definitely require fixes but I think that we
got it to a reasonable point.
Core:
- Rework the sendpage & splice implementations
Instead of feeding data into sockets page by page extend sendmsg
handlers to support taking a reference on the data, controlled by a
new flag called MSG_SPLICE_PAGES
Rework the handling of unexpected-end-of-file to invoke an
additional callback instead of trying to predict what the right
combination of MORE/NOTLAST flags is
Remove the MSG_SENDPAGE_NOTLAST flag completely
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid
- Enable socket busy polling with CONFIG_RT
- Improve reliability and efficiency of reporting for ref_tracker
- Auto-generate a user space C library for various Netlink families
Protocols:
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2]
- Use per-VMA locking for "page-flipping" TCP receive zerocopy
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative
- Create a new MPTCP getsockopt to retrieve all info
(MPTCP_FULL_INFO)
- Avoid waking up applications using TLS sockets until we have a full
record
- Allow using kernel memory for protocol ioctl callbacks, paving the
way to issuing ioctls over io_uring
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch
- PPPoE: make number of hash bits configurable
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig)
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge)
- Support matching on Connectivity Fault Management (CFM) packets
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug
- HSR: don't enable promiscuous mode if device offloads the proto
- Support active scanning in IEEE 802.15.4
- Continue work on Multi-Link Operation for WiFi 7
BPF:
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used, or
in fact passing the verifier at all for complex programs,
especially those using open-coded iterators
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what the
output buffer *should* be, without writing anything
- Accept dynptr memory as memory arguments passed to helpers
- Add routing table ID to bpf_fib_lookup BPF helper
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only)
- Show target_{obj,btf}_id in tracing link fdinfo
- Addition of several new kfuncs (most of the names are
self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter:
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value
- Increase ip_vs_conn_tab_bits range for 64BIT builds
- Allow updating size of a set
- Improve NAT tuple selection when connection is closing
Driver API:
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out)
- Support configuring rate selection pins of SFP modules
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio)
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message
- Split devlink instance and devlink port operations
New hardware / drivers:
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers:
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer
header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested
configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is a
variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split the
different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and Enhanced
MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips"
* tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits)
net: scm: introduce and use scm_recv_unix helper
af_unix: Skip SCM_PIDFD if scm->pid is NULL.
net: lan743x: Simplify comparison
netlink: Add __sock_i_ino() for __netlink_diag_dump().
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses
Revert "af_unix: Call scm_recv() only after scm_set_cred()."
phylink: ReST-ify the phylink_pcs_neg_mode() kdoc
libceph: Partially revert changes to support MSG_SPLICE_PAGES
net: phy: mscc: fix packet loss due to RGMII delays
net: mana: use vmalloc_array and vcalloc
net: enetc: use vmalloc_array and vcalloc
ionic: use vmalloc_array and vcalloc
pds_core: use vmalloc_array and vcalloc
gve: use vmalloc_array and vcalloc
octeon_ep: use vmalloc_array and vcalloc
net: usb: qmi_wwan: add u-blox 0x1312 composition
perf trace: fix MSG_SPLICE_PAGES build error
ipvlan: Fix return value of ipvlan_queue_xmit()
netfilter: nf_tables: fix underflow in chain reference counter
netfilter: nf_tables: unbind non-anonymous set if rule construction fails
...
The changes queued up for v6.5-rc1 for sysctl are in line with
prior efforts to stop usage of deprecated routines which incur
recursion and also make it hard to remove the empty array element
in each sysctl array declaration. The most difficult user to modify
was parport which required a bit of re-thinking of how to declare shared
sysctls there, Joel Granados has stepped up to the plate to do most of
this work and eventual removal of register_sysctl_table(). That work
ended up saving us about 1465 bytes according to bloat-o-meter. Since
we gained a few bloat-o-meter karma points I moved two rather small
sysctl arrays from kernel/sysctl.c leaving us only two more sysctl
arrays to move left.
Most changes have been tested on linux-next for about a month. The last
straggler patches are a minor parport fix, changes to the sysctl
kernel selftest so to verify correctness and prevent regressions for
the future change he made to provide an alternative solution for the
special sysctl mount point target which was using the now deprecated
sysctl child element.
This is all prep work to now finally be able to remove the empty
array element in all sysctl declarations / registrations which is
expected to save us a bit of bytes all over the kernel. That work
will be tested early after v6.5-rc1 is out.
-----BEGIN PGP SIGNATURE-----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=sXUU
-----END PGP SIGNATURE-----
Merge tag 'v6.5-rc1-sysctl-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"The changes for sysctl are in line with prior efforts to stop usage of
deprecated routines which incur recursion and also make it hard to
remove the empty array element in each sysctl array declaration.
The most difficult user to modify was parport which required a bit of
re-thinking of how to declare shared sysctls there, Joel Granados has
stepped up to the plate to do most of this work and eventual removal
of register_sysctl_table(). That work ended up saving us about 1465
bytes according to bloat-o-meter. Since we gained a few bloat-o-meter
karma points I moved two rather small sysctl arrays from
kernel/sysctl.c leaving us only two more sysctl arrays to move left.
Most changes have been tested on linux-next for about a month. The
last straggler patches are a minor parport fix, changes to the sysctl
kernel selftest so to verify correctness and prevent regressions for
the future change he made to provide an alternative solution for the
special sysctl mount point target which was using the now deprecated
sysctl child element.
This is all prep work to now finally be able to remove the empty array
element in all sysctl declarations / registrations which is expected
to save us a bit of bytes all over the kernel. That work will be
tested early after v6.5-rc1 is out"
* tag 'v6.5-rc1-sysctl-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
sysctl: replace child with an enumeration
sysctl: Remove debugging dump_stack
test_sysclt: Test for registering a mount point
test_sysctl: Add an option to prevent test skip
test_sysctl: Add an unregister sysctl test
test_sysctl: Group node sysctl test under one func
test_sysctl: Fix test metadata getters
parport: plug a sysctl register leak
sysctl: move security keys sysctl registration to its own file
sysctl: move umh sysctl registration to its own file
signal: move show_unhandled_signals sysctl to its own file
sysctl: remove empty dev table
sysctl: Remove register_sysctl_table
sysctl: Refactor base paths registrations
sysctl: stop exporting register_sysctl_table
parport: Removed sysctl related defines
parport: Remove register_sysctl_table from parport_default_proc_register
parport: Remove register_sysctl_table from parport_device_proc_register
parport: Remove register_sysctl_table from parport_proc_register
parport: Move magic number "15" to a define
The changes queued up for v6.5-rc1 for modules are pretty tame, mostly
code removal of moving of code. Only two minor functional changes are
made, the only one which stands out is Sebastian Andrzej Siewior's
simplification of module reference counting by removing preempt_disable()
and that has been tested on linux-next for well over a month without
no regressions. I'm now, I guess, also a kitchen sink for some kallsyms
changes.
-----BEGIN PGP SIGNATURE-----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=gjKD
-----END PGP SIGNATURE-----
Merge tag 'v6.5-rc1-modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull module updates from Luis Chamberlain:
"The changes queued up for modules are pretty tame, mostly code removal
of moving of code.
Only two minor functional changes are made, the only one which stands
out is Sebastian Andrzej Siewior's simplification of module reference
counting by removing preempt_disable() and that has been tested on
linux-next for well over a month without no regressions.
I'm now, I guess, also a kitchen sink for some kallsyms changes"
[ There was a mis-communication about the concurrent module load changes
that I had expected to come through Luis despite me authoring the
patch. So some of the module updates were left hanging in the email
ether, and I just committed them separately.
It's my bad - I should have made it more clear that I expected my
own patches to come through the module tree too. Now they missed
linux-next, but hopefully that won't cause any issues - Linus ]
* tag 'v6.5-rc1-modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
kallsyms: make kallsyms_show_value() as generic function
kallsyms: move kallsyms_show_value() out of kallsyms.c
kallsyms: remove unsed API lookup_symbol_attrs
kallsyms: remove unused arch_get_kallsym() helper
module: Remove preempt_disable() from module reference counting.
This is the new-and-improved attempt at avoiding huge memory load spikes
when the user space boot sequence tries to load hundreds (or even
thousands) of redundant duplicate modules in parallel.
See commit 9828ed3f69 ("module: error out early on concurrent load of
the same module file") for background and an earlier failed attempt that
was reverted.
That earlier attempt just said "concurrently loading the same module is
silly, just open the module file exclusively and return -ETXTBSY if
somebody else is already loading it".
While it is true that concurrent module loads of the same module is
silly, the reason that earlier attempt then failed was that the
concurrently loaded module would often be a prerequisite for another
module.
Thus failing to load the prerequisite would then cause cascading
failures of the other modules, rather than just short-circuiting that
one unnecessary module load.
At the same time, we still really don't want to load the contents of the
same module file hundreds of times, only to then wait for an eventually
successful load, and have everybody else return -EEXIST.
As a result, this takes another approach, and treats concurrent module
loads from the same file as "idempotent" in the inode. So if one module
load is ongoing, we don't start a new one, but instead just wait for the
first one to complete and return the same return value as it did.
So unlike the first attempt, this does not return early: the intent is
not to speed up the boot, but to avoid a thundering herd problem in
allocating memory (both physical and virtual) for a module more than
once.
Also note that this does change behavior: it used to be that when you
had concurrent loads, you'd have one "winner" that would return success,
and everybody else would return -EEXIST.
In contrast, this idempotent logic goes all Oprah on the problem, and
says "You are a winner! And you are a winner! We are ALL winners". But
since there's no possible actual real semantic difference between "you
loaded the module" and "somebody else already loaded the module", this
is more of a feel-good change than an actual honest-to-goodness semantic
change.
Of course, any true Johnny-come-latelies that don't get caught in the
concurrency filter will still return -EEXIST. It's no different from
not even getting a seat at an Oprah taping. That's life.
See the long thread on the kernel mailing list about this all, which
includes some numbers for memory use before and after the patch.
Link: https://lore.kernel.org/lkml/20230524213620.3509138-1-mcgrof@kernel.org/
Reviewed-by: Johan Hovold <johan@kernel.org>
Tested-by: Johan Hovold <johan@kernel.org>
Tested-by: Luis Chamberlain <mcgrof@kernel.org>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Rudi Heitbaum <rudi@heitbaum..com>
Tested-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This will simplify the next step, where we can then key off the inode to
do one idempotent module load.
Let's do the obvious re-organization in one step, and then the new code
in another.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
top-level directories.
- Douglas Anderson has added a new "buddy" mode to the hardlockup
detector. It permits the detector to work on architectures which
cannot provide the required interrupts, by having CPUs periodically
perform checks on other CPUs.
- Zhen Lei has enhanced kexec's ability to support two crash regions.
- Petr Mladek has done a lot of cleanup on the hard lockup detector's
Kconfig entries.
- And the usual bunch of singleton patches in various places.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZJelTAAKCRDdBJ7gKXxA
juDkAP0VXWynzkXoojdS/8e/hhi+htedmQ3v2dLZD+vBrctLhAEA7rcH58zAVoWa
2ejqO6wDrRGUC7JQcO9VEjT0nv73UwU=
=F293
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-mm updates from Andrew Morton:
- Arnd Bergmann has fixed a bunch of -Wmissing-prototypes in top-level
directories
- Douglas Anderson has added a new "buddy" mode to the hardlockup
detector. It permits the detector to work on architectures which
cannot provide the required interrupts, by having CPUs periodically
perform checks on other CPUs
- Zhen Lei has enhanced kexec's ability to support two crash regions
- Petr Mladek has done a lot of cleanup on the hard lockup detector's
Kconfig entries
- And the usual bunch of singleton patches in various places
* tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits)
kernel/time/posix-stubs.c: remove duplicated include
ocfs2: remove redundant assignment to variable bit_off
watchdog/hardlockup: fix typo in config HARDLOCKUP_DETECTOR_PREFER_BUDDY
powerpc: move arch_trigger_cpumask_backtrace from nmi.h to irq.h
devres: show which resource was invalid in __devm_ioremap_resource()
watchdog/hardlockup: define HARDLOCKUP_DETECTOR_ARCH
watchdog/sparc64: define HARDLOCKUP_DETECTOR_SPARC64
watchdog/hardlockup: make HAVE_NMI_WATCHDOG sparc64-specific
watchdog/hardlockup: declare arch_touch_nmi_watchdog() only in linux/nmi.h
watchdog/hardlockup: make the config checks more straightforward
watchdog/hardlockup: sort hardlockup detector related config values a logical way
watchdog/hardlockup: move SMP barriers from common code to buddy code
watchdog/buddy: simplify the dependency for HARDLOCKUP_DETECTOR_PREFER_BUDDY
watchdog/buddy: don't copy the cpumask in watchdog_next_cpu()
watchdog/buddy: cleanup how watchdog_buddy_check_hardlockup() is called
watchdog/hardlockup: remove softlockup comment in touch_nmi_watchdog()
watchdog/hardlockup: in watchdog_hardlockup_check() use cpumask_copy()
watchdog/hardlockup: don't use raw_cpu_ptr() in watchdog_hardlockup_kick()
watchdog/hardlockup: HAVE_NMI_WATCHDOG must implement watchdog_hardlockup_probe()
watchdog/hardlockup: keep kernel.nmi_watchdog sysctl as 0444 if probe fails
...
- Yosry has also eliminated cgroup's atomic rstat flushing.
- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability.
- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning.
- Lorenzo Stoakes has done some maintanance work on the get_user_pages()
interface.
- Liam Howlett continues with cleanups and maintenance work to the maple
tree code. Peng Zhang also does some work on maple tree.
- Johannes Weiner has done some cleanup work on the compaction code.
- David Hildenbrand has contributed additional selftests for
get_user_pages().
- Thomas Gleixner has contributed some maintenance and optimization work
for the vmalloc code.
- Baolin Wang has provided some compaction cleanups,
- SeongJae Park continues maintenance work on the DAMON code.
- Huang Ying has done some maintenance on the swap code's usage of
device refcounting.
- Christoph Hellwig has some cleanups for the filemap/directio code.
- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the provided
APIs rather than open-coding accesses.
- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings.
- John Hubbard has a series of fixes to the MM selftesting code.
- ZhangPeng continues the folio conversion campaign.
- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock.
- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment from
128 to 8.
- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management.
- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code.
- Vishal Moola also has done some folio conversion work.
- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZJejewAKCRDdBJ7gKXxA
joggAPwKMfT9lvDBEUnJagY7dbDPky1cSYZdJKxxM2cApGa42gEA6Cl8HRAWqSOh
J0qXCzqaaN8+BuEyLGDVPaXur9KirwY=
=B7yQ
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
- Yosry Ahmed brought back some cgroup v1 stats in OOM logs
- Yosry has also eliminated cgroup's atomic rstat flushing
- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability
- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning
- Lorenzo Stoakes has done some maintanance work on the
get_user_pages() interface
- Liam Howlett continues with cleanups and maintenance work to the
maple tree code. Peng Zhang also does some work on maple tree
- Johannes Weiner has done some cleanup work on the compaction code
- David Hildenbrand has contributed additional selftests for
get_user_pages()
- Thomas Gleixner has contributed some maintenance and optimization
work for the vmalloc code
- Baolin Wang has provided some compaction cleanups,
- SeongJae Park continues maintenance work on the DAMON code
- Huang Ying has done some maintenance on the swap code's usage of
device refcounting
- Christoph Hellwig has some cleanups for the filemap/directio code
- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the
provided APIs rather than open-coding accesses
- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings
- John Hubbard has a series of fixes to the MM selftesting code
- ZhangPeng continues the folio conversion campaign
- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock
- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment
from 128 to 8
- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management
- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code
- Vishal Moola also has done some folio conversion work
- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch
* tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits)
mm/hugetlb: remove hugetlb_set_page_subpool()
mm: nommu: correct the range of mmap_sem_read_lock in task_mem()
hugetlb: revert use of page_cache_next_miss()
Revert "page cache: fix page_cache_next/prev_miss off by one"
mm/vmscan: fix root proactive reclaim unthrottling unbalanced node
mm: memcg: rename and document global_reclaim()
mm: kill [add|del]_page_to_lru_list()
mm: compaction: convert to use a folio in isolate_migratepages_block()
mm: zswap: fix double invalidate with exclusive loads
mm: remove unnecessary pagevec includes
mm: remove references to pagevec
mm: rename invalidate_mapping_pagevec to mapping_try_invalidate
mm: remove struct pagevec
net: convert sunrpc from pagevec to folio_batch
i915: convert i915_gpu_error to use a folio_batch
pagevec: rename fbatch_count()
mm: remove check_move_unevictable_pages()
drm: convert drm_gem_put_pages() to use a folio_batch
i915: convert shmem_sg_free_table() to use a folio_batch
scatterlist: add sg_set_folio()
...
The writing operation return the count of writes regardless of whether events
are enabled or disabled. Switch it to return -EBADF to indicates that the event
is disabled.
Link: https://lkml.kernel.org/r/20230626111344.19136-2-sunliming@kylinos.cn
Cc: stable@vger.kernel.org7f5a08c79d ("user_events: Add minimal support for trace_event into ftrace")
Acked-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: sunliming <sunliming@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- Fix KMSAN vs FORTIFY in strlcpy/strlcat (Alexander Potapenko)
- Convert strreplace() to return string start (Andy Shevchenko)
- Flexible array conversions (Arnd Bergmann, Wyes Karny, Kees Cook)
- Add missing function prototypes seen with W=1 (Arnd Bergmann)
- Fix strscpy() kerndoc typo (Arne Welzel)
- Replace strlcpy() with strscpy() across many subsystems which were
either Acked by respective maintainers or were trivial changes that
went ignored for multiple weeks (Azeem Shaikh)
- Remove unneeded cc-option test for UBSAN_TRAP (Nick Desaulniers)
- Add KUnit tests for strcat()-family
- Enable KUnit tests of FORTIFY wrappers under UML
- Add more complete FORTIFY protections for strlcat()
- Add missed disabling of FORTIFY for all arch purgatories.
- Enable -fstrict-flex-arrays=3 globally
- Tightening UBSAN_BOUNDS when using GCC
- Improve checkpatch to check for strcpy, strncpy, and fake flex arrays
- Improve use of const variables in FORTIFY
- Add requested struct_size_t() helper for types not pointers
- Add __counted_by macro for annotating flexible array size members
-----BEGIN PGP SIGNATURE-----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=s0j1
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"There are three areas of note:
A bunch of strlcpy()->strscpy() conversions ended up living in my tree
since they were either Acked by maintainers for me to carry, or got
ignored for multiple weeks (and were trivial changes).
The compiler option '-fstrict-flex-arrays=3' has been enabled
globally, and has been in -next for the entire devel cycle. This
changes compiler diagnostics (though mainly just -Warray-bounds which
is disabled) and potential UBSAN_BOUNDS and FORTIFY _warning_
coverage. In other words, there are no new restrictions, just
potentially new warnings. Any new FORTIFY warnings we've seen have
been fixed (usually in their respective subsystem trees). For more
details, see commit df8fc4e934.
The under-development compiler attribute __counted_by has been added
so that we can start annotating flexible array members with their
associated structure member that tracks the count of flexible array
elements at run-time. It is possible (likely?) that the exact syntax
of the attribute will change before it is finalized, but GCC and Clang
are working together to sort it out. Any changes can be made to the
macro while we continue to add annotations.
As an example of that last case, I have a treewide commit waiting with
such annotations found via Coccinelle:
https://git.kernel.org/linus/adc5b3cb48a049563dc673f348eab7b6beba8a9b
Also see commit dd06e72e68 for more details.
Summary:
- Fix KMSAN vs FORTIFY in strlcpy/strlcat (Alexander Potapenko)
- Convert strreplace() to return string start (Andy Shevchenko)
- Flexible array conversions (Arnd Bergmann, Wyes Karny, Kees Cook)
- Add missing function prototypes seen with W=1 (Arnd Bergmann)
- Fix strscpy() kerndoc typo (Arne Welzel)
- Replace strlcpy() with strscpy() across many subsystems which were
either Acked by respective maintainers or were trivial changes that
went ignored for multiple weeks (Azeem Shaikh)
- Remove unneeded cc-option test for UBSAN_TRAP (Nick Desaulniers)
- Add KUnit tests for strcat()-family
- Enable KUnit tests of FORTIFY wrappers under UML
- Add more complete FORTIFY protections for strlcat()
- Add missed disabling of FORTIFY for all arch purgatories.
- Enable -fstrict-flex-arrays=3 globally
- Tightening UBSAN_BOUNDS when using GCC
- Improve checkpatch to check for strcpy, strncpy, and fake flex
arrays
- Improve use of const variables in FORTIFY
- Add requested struct_size_t() helper for types not pointers
- Add __counted_by macro for annotating flexible array size members"
* tag 'hardening-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (54 commits)
netfilter: ipset: Replace strlcpy with strscpy
uml: Replace strlcpy with strscpy
um: Use HOST_DIR for mrproper
kallsyms: Replace all non-returning strlcpy with strscpy
sh: Replace all non-returning strlcpy with strscpy
of/flattree: Replace all non-returning strlcpy with strscpy
sparc64: Replace all non-returning strlcpy with strscpy
Hexagon: Replace all non-returning strlcpy with strscpy
kobject: Use return value of strreplace()
lib/string_helpers: Change returned value of the strreplace()
jbd2: Avoid printing outside the boundary of the buffer
checkpatch: Check for 0-length and 1-element arrays
riscv/purgatory: Do not use fortified string functions
s390/purgatory: Do not use fortified string functions
x86/purgatory: Do not use fortified string functions
acpi: Replace struct acpi_table_slit 1-element array with flex-array
clocksource: Replace all non-returning strlcpy with strscpy
string: use __builtin_memcpy() in strlcpy/strlcat
staging: most: Replace all non-returning strlcpy with strscpy
drm/i2c: tda998x: Replace all non-returning strlcpy with strscpy
...
-----BEGIN PGP SIGNATURE-----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=3nWy
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20230626' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
- A SafeSetID patch to correct what appears to be a cut-n-paste typo in
the code causing a UID to be printed where a GID was desired.
This is coming via the LSM tree because we haven't been able to get a
response from the SafeSetID maintainer (Micah Morton) in several
months. Hopefully we are able to get in touch with Micah, but until
we do I'm going to pick them up in the LSM tree.
- A small fix to the reiserfs LSM xattr code.
We're continuing to work through some issues with the reiserfs code
as we try to fixup the LSM xattr handling, but in the process we're
uncovering some ugly problems in reiserfs and we may just end up
removing the LSM xattr support in reiserfs prior to reiserfs'
removal.
For better or worse, this shouldn't impact any of the reiserfs users,
as we discovered that LSM xattrs on reiserfs were completely broken,
meaning no one is currently using the combo of reiserfs and a file
labeling LSM.
- A tweak to how the cap_user_data_t struct/typedef is declared in the
header file to appease the Sparse gods.
- In the process of trying to sort out the SafeSetID lost-maintainer
problem I realized that I needed to update the labeled networking
entry to "Supported".
- Minor comment/documentation and spelling fixes.
* tag 'lsm-pr-20230626' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
device_cgroup: Fix kernel-doc warnings in device_cgroup
SafeSetID: fix UID printed instead of GID
MAINTAINERS: move labeled networking to "supported"
capability: erase checker warnings about struct __user_cap_data_struct
lsm: fix a number of misspellings
reiserfs: Initialize sec->length in reiserfs_security_init().
capability: fix kernel-doc warnings in capability.c
-----BEGIN PGP SIGNATURE-----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=+w0u
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20230626' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit update from Paul Moore:
"A single audit patch that resolves two compiler warnings regarding
missing function prototypes"
* tag 'audit-pr-20230626' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: avoid missing-prototype warnings
* Whenever cpuset needs to rebuild sched_domain, it walked all tasks looking
for DEADLINE tasks as they need to be accounted on the new domain. Walking
all tasks can be expensive and there may not be any DEADLINE tasks at all.
Task iteration is now omitted if there are no DEADLINE tasks.
* Fixes DEADLINE bandwidth misaccounting after task migration failures.
* When no controller is enabled, -Wstringop-overflow warning is triggered.
The fix patch added an early exit which is too eager and got reverted for
now. Will fix later.
* Everything else are minor cleanups.
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZJoRHw4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGZatAQCKTv8pb5HEgochph4n26laSdVZs6ce3Y+s7V1T
rum+3QD/TyJFmCkZSMscolZGFuafpg41sjPbmc4SexeuAMYCMgY=
=nioD
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- Whenever cpuset needs to rebuild sched_domain, it walked all tasks
looking for DEADLINE tasks as they need to be accounted on the new
domain. Walking all tasks can be expensive and there may not be any
DEADLINE tasks at all. Task iteration is now omitted if there are no
DEADLINE tasks
- Fixes DEADLINE bandwidth misaccounting after task migration failures
- When no controller is enabled, -Wstringop-overflow warning is
triggered. The fix patch added an early exit which is too eager and
got reverted for now. Will fix later
- Everything else is minor cleanups
* tag 'cgroup-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
Revert "cgroup: Avoid -Wstringop-overflow warnings"
cgroup/misc: Expose misc.current on cgroup v2 root
cgroup: Avoid -Wstringop-overflow warnings
cgroup: remove obsolete comment on cgroup_on_dfl()
cgroup: remove unused task_cgroup_path()
cgroup/cpuset: remove unneeded header files
cgroup: make cgroup_is_threaded() and cgroup_is_thread_root() static
rdmacg: fix kernel-doc warnings in rdmacg
cgroup: Replace the css_set call with cgroup_get
cgroup: remove unused macro for_each_e_css()
cgroup: Update out-of-date comment in cgroup_migrate()
cgroup: Replace all non-returning strlcpy with strscpy
cgroup/cpuset: remove unneeded header files
cgroup/cpuset: Free DL BW in case can_attach() fails
sched/deadline: Create DL BW alloc, free & check overflow interface
cgroup/cpuset: Iterate only if DEADLINE tasks are present
sched/cpuset: Keep track of SCHED_DEADLINE task in cpusets
sched/cpuset: Bring back cpuset_mutex
cgroup/cpuset: Rename functions dealing with DEADLINE accounting
* Concurrency-managed per-cpu work items that hog CPUs and delay the
execution of other work items are now automatically detected and excluded
from concurrency management. Reporting on such work items can also be
enabled through a config option.
* Added tools/workqueue/wq_monitor.py which improves visibility into
workqueue usages and behaviors.
* Includes Arnd's minimal fix for gcc-13 enum warning on 32bit compiles.
This conflicts with afa4bb778e ("workqueue: clean up WORK_* constant
types, clarify masking") in master. Can be resolved by picking the master
version.
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZJoGvw4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGZu0AP9IGK2opAzO9i3i1/Ys81b3sHi9PwrYWH3g252T
Oe3O6QD/Wh0wYBVl0o7IdW6BGdd5iNwIEs420G53UmmPrATqsgQ=
=TffY
-----END PGP SIGNATURE-----
Merge tag 'wq-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue updates from Tejun Heo:
- Concurrency-managed per-cpu work items that hog CPUs and delay the
execution of other work items are now automatically detected and
excluded from concurrency management. Reporting on such work items
can also be enabled through a config option.
- Added tools/workqueue/wq_monitor.py which improves visibility into
workqueue usages and behaviors.
- Arnd's minimal fix for gcc-13 enum warning on 32bit compiles,
superseded by commit afa4bb778e in mainline.
* tag 'wq-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Disable per-cpu CPU hog detection when wq_cpu_intensive_thresh_us is 0
workqueue: Fix WARN_ON_ONCE() triggers in worker_enter_idle()
workqueue: fix enum type for gcc-13
workqueue: Track and monitor per-workqueue CPU time usage
workqueue: Report work funcs that trigger automatic CPU_INTENSIVE mechanism
workqueue: Automatically mark CPU-hogging work items CPU_INTENSIVE
workqueue: Improve locking rule description for worker fields
workqueue: Move worker_set/clr_flags() upwards
workqueue: Re-order struct worker fields
workqueue: Add pwq->stats[] and a monitoring script
Further upgrade queue_work_on() comment
- Rework & fix the event forwarding logic by extending the
core interface. This fixes AMD PMU events that have to
be forwarded from the core PMU to the IBS PMU.
- Add self-tests to test AMD IBS invocation via core PMU events
- Clean up Intel FixCntrCtl MSR encoding & handling
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xn05
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events updates from Ingo Molnar:
- Rework & fix the event forwarding logic by extending the core
interface.
This fixes AMD PMU events that have to be forwarded from the
core PMU to the IBS PMU.
- Add self-tests to test AMD IBS invocation via core PMU events
- Clean up Intel FixCntrCtl MSR encoding & handling
* tag 'perf-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Re-instate the linear PMU search
perf/x86/intel: Define bit macros for FixCntrCtl MSR
perf test: Add selftest to test IBS invocation via core pmu events
perf/core: Remove pmu linear searching code
perf/ibs: Fix interface via core pmu events
perf/core: Rework forwarding of {task|cpu}-clock events
- Introduce cmpxchg128() -- aka. the demise of cmpxchg_double().
The cmpxchg128() family of functions is basically & functionally
the same as cmpxchg_double(), but with a saner interface: instead
of a 6-parameter horror that forced u128 - u64/u64-halves layout
details on the interface and exposed users to complexity,
fragility & bugs, use a natural 3-parameter interface with u128 types.
- Restructure the generated atomic headers, and add
kerneldoc comments for all of the generic atomic{,64,_long}_t
operations. Generated definitions are much cleaner now,
and come with documentation.
- Implement lock_set_cmp_fn() on lockdep, for defining an ordering
when taking multiple locks of the same type. This gets rid of
one use of lockdep_set_novalidate_class() in the bcache code.
- Fix raw_cpu_generic_try_cmpxchg() bug due to an unintended
variable shadowing generating garbage code on Clang on certain
ARM builds.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=DsYj
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- Introduce cmpxchg128() -- aka. the demise of cmpxchg_double()
The cmpxchg128() family of functions is basically & functionally the
same as cmpxchg_double(), but with a saner interface.
Instead of a 6-parameter horror that forced u128 - u64/u64-halves
layout details on the interface and exposed users to complexity,
fragility & bugs, use a natural 3-parameter interface with u128
types.
- Restructure the generated atomic headers, and add kerneldoc comments
for all of the generic atomic{,64,_long}_t operations.
The generated definitions are much cleaner now, and come with
documentation.
- Implement lock_set_cmp_fn() on lockdep, for defining an ordering when
taking multiple locks of the same type.
This gets rid of one use of lockdep_set_novalidate_class() in the
bcache code.
- Fix raw_cpu_generic_try_cmpxchg() bug due to an unintended variable
shadowing generating garbage code on Clang on certain ARM builds.
* tag 'locking-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
locking/atomic: scripts: fix ${atomic}_dec_if_positive() kerneldoc
percpu: Fix self-assignment of __old in raw_cpu_generic_try_cmpxchg()
locking/atomic: treewide: delete arch_atomic_*() kerneldoc
locking/atomic: docs: Add atomic operations to the driver basic API documentation
locking/atomic: scripts: generate kerneldoc comments
docs: scripts: kernel-doc: accept bitwise negation like ~@var
locking/atomic: scripts: simplify raw_atomic*() definitions
locking/atomic: scripts: simplify raw_atomic_long*() definitions
locking/atomic: scripts: split pfx/name/sfx/order
locking/atomic: scripts: restructure fallback ifdeffery
locking/atomic: scripts: build raw_atomic_long*() directly
locking/atomic: treewide: use raw_atomic*_<op>()
locking/atomic: scripts: add trivial raw_atomic*_<op>()
locking/atomic: scripts: factor out order template generation
locking/atomic: scripts: remove leftover "${mult}"
locking/atomic: scripts: remove bogus order parameter
locking/atomic: xtensa: add preprocessor symbols
locking/atomic: x86: add preprocessor symbols
locking/atomic: sparc: add preprocessor symbols
locking/atomic: sh: add preprocessor symbols
...
- Scheduler SMP load-balancer improvements:
- Avoid unnecessary migrations within SMT domains on hybrid systems.
Problem:
On hybrid CPU systems, (processors with a mixture of higher-frequency
SMT cores and lower-frequency non-SMT cores), under the old code
lower-priority CPUs pulled tasks from the higher-priority cores if
more than one SMT sibling was busy - resulting in many unnecessary
task migrations.
Solution:
The new code improves the load balancer to recognize SMT cores with more
than one busy sibling and allows lower-priority CPUs to pull tasks, which
avoids superfluous migrations and lets lower-priority cores inspect all SMT
siblings for the busiest queue.
- Implement the 'runnable boosting' feature in the EAS balancer: consider CPU
contention in frequency, EAS max util & load-balance busiest CPU selection.
This improves CPU utilization for certain workloads, while leaves other key
workloads unchanged.
- Scheduler infrastructure improvements:
- Rewrite the scheduler topology setup code by consolidating it
into the build_sched_topology() helper function and building
it dynamically on the fly.
- Resolve the local_clock() vs. noinstr complications by rewriting
the code: provide separate sched_clock_noinstr() and
local_clock_noinstr() functions to be used in instrumentation code,
and make sure it is all instrumentation-safe.
- Fixes:
- Fix a kthread_park() race with wait_woken()
- Fix misc wait_task_inactive() bugs unearthed by the -rt merge:
- Fix UP PREEMPT bug by unifying the SMP and UP implementations.
- Fix task_struct::saved_state handling.
- Fix various rq clock update bugs, unearthed by turning on the rq clock
debugging code.
- Fix the PSI WINDOW_MIN_US trigger limit, which was easy to trigger by
creating enough cgroups, by removing the warnign and restricting
window size triggers to PSI file write-permission or CAP_SYS_RESOURCE.
- Propagate SMT flags in the topology when removing degenerate domain
- Fix grub_reclaim() calculation bug in the deadline scheduler code
- Avoid resetting the min update period when it is unnecessary, in
psi_trigger_destroy().
- Don't balance a task to its current running CPU in load_balance(),
which was possible on certain NUMA topologies with overlapping
groups.
- Fix the sched-debug printing of rq->nr_uninterruptible
- Cleanups:
- Address various -Wmissing-prototype warnings, as a preparation
to (maybe) enable this warning in the future.
- Remove unused code
- Mark more functions __init
- Fix shadow-variable warnings
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmSatWQRHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1j62xAAuGOx1LcDfRGC6WGQzp1zOdlsVQtnDvlS
qL58zYSHgizprpVQ3j87SBaG4CHCdvd2Bo36yW0lNZS4nd203qdq7fkrMb3hPP/w
egUQUzMegf5fF6BWldKeMjuHSt+twFQz/ZAKK8iSbAir6CHNAqbNst1oL0i/+Tyk
o33hBs1hT5tnbFb1NSVZkX4k+qT3LzTW4K2QgjjGtkScr6yHh2BdEVefyigWOjdo
9s02d00ll9a2r+F5txlN7Dnw6TN7rmTXGMOJU5bZvBE90/anNiAorMXHJdEKCyUR
u9+JtBdJWiCplGa/tSRcxT16ZW1VdtTnd9q66TDhXREd2UNDFqBEyg5Wl77K4Tlf
vKFajmj/to+cTbuv6m6TVR+zyXpdEpdL6F04P44U3qiJvDobBqeDNKHHIqpmbHXl
AXUXcPWTVAzXX1Ce5M+BeAgTBQ1T7C5tELILrTNQHJvO1s9VVBRFZ/l65Ps4vu7T
wIZ781IFuopk0zWqHovNvgKrJ7oFmOQQZFttQEe8n6nafkjI7u+IZ8FayiGaUMRr
4GawFGUCEdYh8z9qyslGKe8Q/Rphfk6hxMFRYUJpDmubQ0PkMeDjDGq77jDGl1PF
VqwSDEyOaBJs7Gqf/mem00JtzBmXhkhm1SEjggHMI2IQbr/eeBXoLQOn3CDapO/N
PiDbtX760ic=
=EWQA
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Scheduler SMP load-balancer improvements:
- Avoid unnecessary migrations within SMT domains on hybrid systems.
Problem:
On hybrid CPU systems, (processors with a mixture of
higher-frequency SMT cores and lower-frequency non-SMT cores),
under the old code lower-priority CPUs pulled tasks from the
higher-priority cores if more than one SMT sibling was busy -
resulting in many unnecessary task migrations.
Solution:
The new code improves the load balancer to recognize SMT cores
with more than one busy sibling and allows lower-priority CPUs
to pull tasks, which avoids superfluous migrations and lets
lower-priority cores inspect all SMT siblings for the busiest
queue.
- Implement the 'runnable boosting' feature in the EAS balancer:
consider CPU contention in frequency, EAS max util & load-balance
busiest CPU selection.
This improves CPU utilization for certain workloads, while leaves
other key workloads unchanged.
Scheduler infrastructure improvements:
- Rewrite the scheduler topology setup code by consolidating it into
the build_sched_topology() helper function and building it
dynamically on the fly.
- Resolve the local_clock() vs. noinstr complications by rewriting
the code: provide separate sched_clock_noinstr() and
local_clock_noinstr() functions to be used in instrumentation code,
and make sure it is all instrumentation-safe.
Fixes:
- Fix a kthread_park() race with wait_woken()
- Fix misc wait_task_inactive() bugs unearthed by the -rt merge:
- Fix UP PREEMPT bug by unifying the SMP and UP implementations
- Fix task_struct::saved_state handling
- Fix various rq clock update bugs, unearthed by turning on the rq
clock debugging code.
- Fix the PSI WINDOW_MIN_US trigger limit, which was easy to trigger
by creating enough cgroups, by removing the warnign and restricting
window size triggers to PSI file write-permission or
CAP_SYS_RESOURCE.
- Propagate SMT flags in the topology when removing degenerate domain
- Fix grub_reclaim() calculation bug in the deadline scheduler code
- Avoid resetting the min update period when it is unnecessary, in
psi_trigger_destroy().
- Don't balance a task to its current running CPU in load_balance(),
which was possible on certain NUMA topologies with overlapping
groups.
- Fix the sched-debug printing of rq->nr_uninterruptible
Cleanups:
- Address various -Wmissing-prototype warnings, as a preparation to
(maybe) enable this warning in the future.
- Remove unused code
- Mark more functions __init
- Fix shadow-variable warnings"
* tag 'sched-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
sched/core: Avoid multiple calling update_rq_clock() in __cfsb_csd_unthrottle()
sched/core: Avoid double calling update_rq_clock() in __balance_push_cpu_stop()
sched/core: Fixed missing rq clock update before calling set_rq_offline()
sched/deadline: Update GRUB description in the documentation
sched/deadline: Fix bandwidth reclaim equation in GRUB
sched/wait: Fix a kthread_park race with wait_woken()
sched/topology: Mark set_sched_topology() __init
sched/fair: Rename variable cpu_util eff_util
arm64/arch_timer: Fix MMIO byteswap
sched/fair, cpufreq: Introduce 'runnable boosting'
sched/fair: Refactor CPU utilization functions
cpuidle: Use local_clock_noinstr()
sched/clock: Provide local_clock_noinstr()
x86/tsc: Provide sched_clock_noinstr()
clocksource: hyper-v: Provide noinstr sched_clock()
clocksource: hyper-v: Adjust hv_read_tsc_page_tsc() to avoid special casing U64_MAX
x86/vdso: Fix gettimeofday masking
math64: Always inline u128 version of mul_u64_u64_shr()
s390/time: Provide sched_clock_noinstr()
loongarch: Provide noinstr sched_clock_read()
...
This pull contains the following branches:
doc.2023.05.10a: Documentation updates
fixes.2023.05.11a: Miscellaneous fixes, perhaps most notably:
o Remove RCU_NONIDLE(). The new visibility of most of the idle
loop to RCU has obsoleted this API.
o Make the RCU_SOFTIRQ callback-invocation time limit also apply
to the rcuc kthreads that invoke callbacks for CONFIG_PREEMPT_RT.
o Add a jiffies-based callback-invocation time limit to handle
long-running callbacks. (The local_clock() function is only
invoked once per 32 callbacks due to its high overhead.)
o Stop rcu_tasks_invoke_cbs() from using never-onlined CPUs,
which fixes a bug that can occur on systems with non-contiguous
CPU numbering.
kvfree.2023.05.10a: kvfree_rcu updates
o Eliminate the single-argument variant of k[v]free_rcu() now
that all uses have been converted to k[v]free_rcu_mightsleep().
o Add WARN_ON_ONCE() checks for k[v]free_rcu*() freeing callbacks
too soon. Yes, this is closing the barn door after the horse
has escaped, but Murphy says that there will be more horses.
nocb.2023.05.11a: Callback-offloading updates
o Fix a number of bugs involving the shrinker and lazy callbacks.
rcu-tasks.2023.05.10a: Tasks RCU updates
torture.2023.05.15a: Torture-test updates
rcu-urgent.2023.06.06a: Urgent SRCU fix (already pulled)
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmSUuukTHHBhdWxtY2tA
a2VybmVsLm9yZwAKCRCevxLzctn7jLB5EACWArBYSbXh9kx6RP3LRkOd//fQWuqx
z/RmHjMx3a2uIQpsbeAj+jrgHYzSOi7Afdnx2s0gUIWGjpF4d+e31eco9xTQtWIs
A3/pXUlcTyaPXEZh5ro763UyBF/K003TAdo7EZAScTfDNp2knqGdEOyXTOXiAULX
GH922kIqg0chbYaWocLY3g5mXeEm+kGY8GrDAB7/B3jHgoyylXzmSULDP4GQV7hw
DkM0GOlc3TSzHonnNS6j1xboqY4HhWIDkBrD4Oh5P//ttMpb1b6gs1zEyjCQcNBe
a6fnNF+0dUwANIZKroPn/L1uTGsEUhmLFkVK+XIuAit97yWI6t+aRH6TzHHYmkpu
wVmLxv/FbJohP7ArWaI8l0gNl0vkli3ZgQXnRvSpCqIFR93AWVMeZsDTGOcLUdry
AZEnuGXHnc9UB0KGOIras0o/EQezKq57JUV2bBZjl/GIDc3qiaJKnBhHysPc1iuE
UfP052vCaoZxO3U/FrObQhjLZnstKBYHj8WolxMjIyNMlRIvDro6O1WG4+mjeLDP
xdrjKGstsJh80CYDei+vJBXsbszhxv8yV4hCQX9JcDl3RjEqOOxgKUnAaP2mm02O
MX33P3MZvSsHGoxkJpXDSlkQlbNqDBMIjZXbZLRF4o8fPhVmQU/4QlJN0iFOoXaQ
1qqGrerEzfn0Jw==
=3LCd
-----END PGP SIGNATURE-----
Merge tag 'rcu.2023.06.22a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
"Documentation updates
Miscellaneous fixes, perhaps most notably:
- Remove RCU_NONIDLE(). The new visibility of most of the idle loop
to RCU has obsoleted this API.
- Make the RCU_SOFTIRQ callback-invocation time limit also apply to
the rcuc kthreads that invoke callbacks for CONFIG_PREEMPT_RT.
- Add a jiffies-based callback-invocation time limit to handle
long-running callbacks. (The local_clock() function is only invoked
once per 32 callbacks due to its high overhead.)
- Stop rcu_tasks_invoke_cbs() from using never-onlined CPUs, which
fixes a bug that can occur on systems with non-contiguous CPU
numbering.
kvfree_rcu updates:
- Eliminate the single-argument variant of k[v]free_rcu() now that
all uses have been converted to k[v]free_rcu_mightsleep().
- Add WARN_ON_ONCE() checks for k[v]free_rcu*() freeing callbacks too
soon. Yes, this is closing the barn door after the horse has
escaped, but Murphy says that there will be more horses.
Callback-offloading updates:
- Fix a number of bugs involving the shrinker and lazy callbacks.
Tasks RCU updates
Torture-test updates"
* tag 'rcu.2023.06.22a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (32 commits)
torture: Remove duplicated argument -enable-kvm for ppc64
doc/rcutorture: Add description of rcutorture.stall_cpu_block
rcu/rcuscale: Stop kfree_scale_thread thread(s) after unloading rcuscale
rcu/rcuscale: Move rcu_scale_*() after kfree_scale_cleanup()
rcutorture: Correct name of use_softirq module parameter
locktorture: Add long_hold to adjust lock-hold delays
rcu/nocb: Make shrinker iterate only over NOCB CPUs
rcu-tasks: Stop rcu_tasks_invoke_cbs() from using never-onlined CPUs
rcu: Make rcu_cpu_starting() rely on interrupts being disabled
rcu: Mark rcu_cpu_kthread() accesses to ->rcu_cpu_has_work
rcu: Mark additional concurrent load from ->cpu_no_qs.b.exp
rcu: Employ jiffies-based backstop to callback time limit
rcu: Check callback-invocation time limit for rcuc kthreads
rcu: Remove RCU_NONIDLE()
rcu: Add more RCU files to kernel-api.rst
rcu-tasks: Clarify the cblist_init_generic() function's pr_info() output
rcu-tasks: Avoid pr_info() with spin lock in cblist_init_generic()
rcu/nocb: Recheck lazy callbacks under the ->nocb_lock from shrinker
rcu/nocb: Fix shrinker race against callback enqueuer
rcu/nocb: Protect lazy shrinker against concurrent (de-)offloading
...
While running bpf selftests it's possible to get following fault:
general protection fault, probably for non-canonical address \
0x6b6b6b6b6b6b6b6b: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC NOPTI
...
Call Trace:
<TASK>
fprobe_handler+0xc1/0x270
? __pfx_bpf_testmod_init+0x10/0x10
? __pfx_bpf_testmod_init+0x10/0x10
? bpf_fentry_test1+0x5/0x10
? bpf_fentry_test1+0x5/0x10
? bpf_testmod_init+0x22/0x80
? do_one_initcall+0x63/0x2e0
? rcu_is_watching+0xd/0x40
? kmalloc_trace+0xaf/0xc0
? do_init_module+0x60/0x250
? __do_sys_finit_module+0xac/0x120
? do_syscall_64+0x37/0x90
? entry_SYSCALL_64_after_hwframe+0x72/0xdc
</TASK>
In unregister_fprobe function we can't release fp->rethook while it's
possible there are some of its users still running on another cpu.
Moving rethook_free call after fp->ops is unregistered with
unregister_ftrace_function call.
Link: https://lore.kernel.org/all/20230615115236.3476617-1-jolsa@kernel.org/
Fixes: 5b0ab78998 ("fprobe: Add exit_handler support")
Cc: stable@vger.kernel.org
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
- Introduce power capping core support for Intel TPMI (Topology Aware
Register and PM Capsule Interface) and a TPMI interface driver for
Intel RAPL (Zhang Rui, Dan Carpenter).
- Fix CONFIG_IOSF_MBI dependency in the Intel RAPL power capping
driver (Zhang Rui).
- Fix invalid initialization for pl4_supported field in the Intel RAPL
power capping driver (Sumeet Pawnikar).
- Clean up the intel_idle driver, make it work with VM guests that
cannot use the MWAIT instruction and address the case in which the
host may enter a deep idle state when the guest is idle (Arjan van
de Ven).
- Prevent cpufreq drivers that provide the ->adjust_perf() callback
without a ->fast_switch() one which is used as a fallback from the
former in some cases (Wyes Karny).
- Fix some issues related to the AMD P-state cpufreq driver (Mario
Limonciello, Wyes Karny).
- Fix the energy_performance_preference attribute handling in the
intel_pstate driver in passive mode (Tero Kristo).
- Fix the handling of pm_suspend_target_state when CONFIG_PM is unset
(Kai-Heng Feng).
- Correct spelling mistake in a comment in the hibernation code (Wang
Honghui).
- Add arch_resume_nosmt() prototype to avoid a "missing prototypes"
build warning (Arnd Bergmann).
- Restrict pm_pr_dbg() to system-wide power transitions and use it in
a few additional places (Mario Limonciello).
- Drop verification of in-params from genpd_add_device() and ensure
that all of its callers will do it (Ulf Hansson).
- Prevent possible integer overflows from occurring in
genpd_parse_state() (Nikita Zhandarovich).
- Reorder fieldls in 'struct devfreq_dev_status' to reduce its size
somewhat (Christophe JAILLET).
- Ensure that the Exynos PPMU driver is already loaded before the
Exynos Bus driver starts probing so as to avoid a possible freeze
loading of the kernel modules (Marek Szyprowski).
- Fix variable deferencing before NULL check in the mtk-cci devfreq
driver (Sukrut Bellary).
-----BEGIN PGP SIGNATURE-----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=SZV7
-----END PGP SIGNATURE-----
Merge tag 'pm-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add Intel TPMI (Topology Aware Register and PM Capsule
Interface) support to the power capping subsystem, extend the
intel_idle driver to work in VM guests where MWAIT is not available,
extend the system-wide power management diagnostics, fix bugs and
clean up code.
Specifics:
- Introduce power capping core support for Intel TPMI (Topology Aware
Register and PM Capsule Interface) and a TPMI interface driver for
Intel RAPL (Zhang Rui, Dan Carpenter)
- Fix CONFIG_IOSF_MBI dependency in the Intel RAPL power capping
driver (Zhang Rui)
- Fix invalid initialization for pl4_supported field in the Intel
RAPL power capping driver (Sumeet Pawnikar)
- Clean up the intel_idle driver, make it work with VM guests that
cannot use the MWAIT instruction and address the case in which the
host may enter a deep idle state when the guest is idle (Arjan van
de Ven)
- Prevent cpufreq drivers that provide the ->adjust_perf() callback
without a ->fast_switch() one which is used as a fallback from the
former in some cases (Wyes Karny)
- Fix some issues related to the AMD P-state cpufreq driver (Mario
Limonciello, Wyes Karny)
- Fix the energy_performance_preference attribute handling in the
intel_pstate driver in passive mode (Tero Kristo)
- Fix the handling of pm_suspend_target_state when CONFIG_PM is unset
(Kai-Heng Feng)
- Correct spelling mistake in a comment in the hibernation code (Wang
Honghui)
- Add arch_resume_nosmt() prototype to avoid a "missing prototypes"
build warning (Arnd Bergmann)
- Restrict pm_pr_dbg() to system-wide power transitions and use it in
a few additional places (Mario Limonciello)
- Drop verification of in-params from genpd_add_device() and ensure
that all of its callers will do it (Ulf Hansson)
- Prevent possible integer overflows from occurring in
genpd_parse_state() (Nikita Zhandarovich)
- Reorder fieldls in 'struct devfreq_dev_status' to reduce its size
somewhat (Christophe JAILLET)
- Ensure that the Exynos PPMU driver is already loaded before the
Exynos Bus driver starts probing so as to avoid a possible freeze
loading of the kernel modules (Marek Szyprowski)
- Fix variable deferencing before NULL check in the mtk-cci devfreq
driver (Sukrut Bellary)"
* tag 'pm-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (42 commits)
intel_idle: Add a "Long HLT" C1 state for the VM guest mode
cpufreq: intel_pstate: Fix energy_performance_preference for passive
cpufreq: amd-pstate: Add a kernel config option to set default mode
cpufreq: amd-pstate: Set a fallback policy based on preferred_profile
ACPI: CPPC: Add definition for undefined FADT preferred PM profile value
cpufreq: amd-pstate: Set default governor to schedutil
PM: domains: Move the verification of in-params from genpd_add_device()
cpufreq: amd-pstate: Make amd-pstate EPP driver name hyphenated
cpufreq: amd-pstate: Write CPPC enable bit per-socket
intel_idle: Add support for using intel_idle in a VM guest using just hlt
cpufreq: Fail driver register if it has adjust_perf without fast_switch
intel_idle: clean up the (new) state_update_enter_method function
intel_idle: refactor state->enter manipulation into its own function
platform/x86/amd: pmc: Use pm_pr_dbg() for suspend related messages
pinctrl: amd: Use pm_pr_dbg to show debugging messages
ACPI: x86: Add pm_debug_messages for LPS0 _DSM state tracking
include/linux/suspend.h: Only show pm_pr_dbg messages at suspend/resume
powercap: RAPL: Fix a NULL vs IS_ERR() bug
powercap: RAPL: Fix CONFIG_IOSF_MBI dependency
powercap: RAPL: fix invalid initialization for pl4_supported field
...
- Remove repeated 'the' in comments
- Remove unused current_untag_mask()
- Document urgent tip branch timing
- Clean up MSR kernel-doc notation
- Clean up paravirt_ops doc
- Update Srivatsa S. Bhat's maintained areas
- Remove unused extern declaration acpi_copy_wakeup_routine()
-----BEGIN PGP SIGNATURE-----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=N82i
-----END PGP SIGNATURE-----
Merge tag 'x86_cleanups_for_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Dave Hansen:
"As usual, these are all over the map. The biggest cluster is work from
Arnd to eliminate -Wmissing-prototype warnings:
- Address -Wmissing-prototype warnings
- Remove repeated 'the' in comments
- Remove unused current_untag_mask()
- Document urgent tip branch timing
- Clean up MSR kernel-doc notation
- Clean up paravirt_ops doc
- Update Srivatsa S. Bhat's maintained areas
- Remove unused extern declaration acpi_copy_wakeup_routine()"
* tag 'x86_cleanups_for_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
x86/acpi: Remove unused extern declaration acpi_copy_wakeup_routine()
Documentation: virt: Clean up paravirt_ops doc
x86/mm: Remove unused current_untag_mask()
x86/mm: Remove repeated word in comments
x86/lib/msr: Clean up kernel-doc notation
x86/platform: Avoid missing-prototype warnings for OLPC
x86/mm: Add early_memremap_pgprot_adjust() prototype
x86/usercopy: Include arch_wb_cache_pmem() declaration
x86/vdso: Include vdso/processor.h
x86/mce: Add copy_mc_fragile_handle_tail() prototype
x86/fbdev: Include asm/fb.h as needed
x86/hibernate: Declare global functions in suspend.h
x86/entry: Add do_SYSENTER_32() prototype
x86/quirks: Include linux/pnp.h for arch_pnpbios_disabled()
x86/mm: Include asm/numa.h for set_highmem_pages_init()
x86: Avoid missing-prototype warnings for doublefault code
x86/fpu: Include asm/fpu/regset.h
x86: Add dummy prototype for mk_early_pgtbl_32()
x86/pci: Mark local functions as 'static'
x86/ftrace: Move prepare_ftrace_return prototype to header
...
- Core:
- A set of fixes, cleanups and enhancements to the posix timer code:
- Prevent another possible live lock scenario in the exit() path,
which affects POSIX_CPU_TIMERS_TASK_WORK enabled architectures.
- Fix a loop termination issue which was reported syzcaller/KSAN in
the posix timer ID allocation code.
That triggered a deeper look into the posix-timer code which
unearthed more small issues.
- Add missing READ/WRITE_ONCE() annotations
- Fix or remove completely outdated comments
- Document places which are subtle and completely undocumented.
- Add missing hrtimer modes to the trace event decoder
- Small cleanups and enhancements all over the place
- Drivers:
- Rework the Hyper-V clocksource and sched clock setup code
- Remove a deprecated clocksource driver
- Small fixes and enhancements all over the place
-----BEGIN PGP SIGNATURE-----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=hRV9
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Time, timekeeping and related device driver updates:
Core:
- A set of fixes, cleanups and enhancements to the posix timer code:
- Prevent another possible live lock scenario in the exit() path,
which affects POSIX_CPU_TIMERS_TASK_WORK enabled architectures.
- Fix a loop termination issue which was reported syzcaller/KSAN
in the posix timer ID allocation code.
That triggered a deeper look into the posix-timer code which
unearthed more small issues.
- Add missing READ/WRITE_ONCE() annotations
- Fix or remove completely outdated comments
- Document places which are subtle and completely undocumented.
- Add missing hrtimer modes to the trace event decoder
- Small cleanups and enhancements all over the place
Drivers:
- Rework the Hyper-V clocksource and sched clock setup code
- Remove a deprecated clocksource driver
- Small fixes and enhancements all over the place"
* tag 'timers-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
clocksource/drivers/cadence-ttc: Fix memory leak in ttc_timer_probe
dt-bindings: timers: Add Ralink SoCs timer
clocksource/drivers/hyper-v: Rework clocksource and sched clock setup
dt-bindings: timer: brcm,kona-timer: convert to YAML
clocksource/drivers/imx-gpt: Fold <soc/imx/timer.h> into its only user
clk: imx: Drop inclusion of unused header <soc/imx/timer.h>
hrtimer: Add missing sparse annotations to hrtimer locking
clocksource/drivers/imx-gpt: Use only a single name for functions
clocksource/drivers/loongson1: Move PWM timer to clocksource framework
dt-bindings: timer: Add Loongson-1 clocksource
MIPS: Loongson32: Remove deprecated PWM timer clocksource
clocksource/drivers/ingenic-timer: Use pm_sleep_ptr() macro
tracing/timer: Add missing hrtimer modes to decode_hrtimer_mode().
posix-timers: Add sys_ni_posix_timers() prototype
tick/rcu: Fix bogus ratelimit condition
alarmtimer: Remove unnecessary (void *) cast
alarmtimer: Remove unnecessary initialization of variable 'ret'
posix-timers: Refer properly to CONFIG_HIGH_RES_TIMERS
posix-timers: Polish coding style in a few places
posix-timers: Remove pointless comments
...
- Parallel CPU bringup
The reason why people are interested in parallel bringup is to shorten
the (kexec) reboot time of cloud servers to reduce the downtime of the
VM tenants.
The current fully serialized bringup does the following per AP:
1) Prepare callbacks (allocate, intialize, create threads)
2) Kick the AP alive (e.g. INIT/SIPI on x86)
3) Wait for the AP to report alive state
4) Let the AP continue through the atomic bringup
5) Let the AP run the threaded bringup to full online state
There are two significant delays:
#3 The time for an AP to report alive state in start_secondary() on
x86 has been measured in the range between 350us and 3.5ms
depending on vendor and CPU type, BIOS microcode size etc.
#4 The atomic bringup does the microcode update. This has been
measured to take up to ~8ms on the primary threads depending on
the microcode patch size to apply.
On a two socket SKL server with 56 cores (112 threads) the boot CPU
spends on current mainline about 800ms busy waiting for the APs to come
up and apply microcode. That's more than 80% of the actual onlining
procedure.
This can be reduced significantly by splitting the bringup mechanism
into two parts:
1) Run the prepare callbacks and kick the AP alive for each AP which
needs to be brought up.
The APs wake up, do their firmware initialization and run the low
level kernel startup code including microcode loading in parallel
up to the first synchronization point. (#1 and #2 above)
2) Run the rest of the bringup code strictly serialized per CPU
(#3 - #5 above) as it's done today.
Parallelizing that stage of the CPU bringup might be possible in
theory, but it's questionable whether required surgery would be
justified for a pretty small gain.
If the system is large enough the first AP is already waiting at the
first synchronization point when the boot CPU finished the wake-up of
the last AP. That reduces the AP bringup time on that SKL from ~800ms
to ~80ms, i.e. by a factor ~10x.
The actual gain varies wildly depending on the system, CPU, microcode
patch size and other factors. There are some opportunities to reduce
the overhead further, but that needs some deep surgery in the x86 CPU
bringup code.
For now this is only enabled on x86, but the core functionality
obviously works for all SMP capable architectures.
- Enhancements for SMP function call tracing so it is possible to locate
the scheduling and the actual execution points. That allows to measure
IPI delivery time precisely.
-----BEGIN PGP SIGNATURE-----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=Y8if
-----END PGP SIGNATURE-----
Merge tag 'smp-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP updates from Thomas Gleixner:
"A large update for SMP management:
- Parallel CPU bringup
The reason why people are interested in parallel bringup is to
shorten the (kexec) reboot time of cloud servers to reduce the
downtime of the VM tenants.
The current fully serialized bringup does the following per AP:
1) Prepare callbacks (allocate, intialize, create threads)
2) Kick the AP alive (e.g. INIT/SIPI on x86)
3) Wait for the AP to report alive state
4) Let the AP continue through the atomic bringup
5) Let the AP run the threaded bringup to full online state
There are two significant delays:
#3 The time for an AP to report alive state in start_secondary()
on x86 has been measured in the range between 350us and 3.5ms
depending on vendor and CPU type, BIOS microcode size etc.
#4 The atomic bringup does the microcode update. This has been
measured to take up to ~8ms on the primary threads depending
on the microcode patch size to apply.
On a two socket SKL server with 56 cores (112 threads) the boot CPU
spends on current mainline about 800ms busy waiting for the APs to
come up and apply microcode. That's more than 80% of the actual
onlining procedure.
This can be reduced significantly by splitting the bringup
mechanism into two parts:
1) Run the prepare callbacks and kick the AP alive for each AP
which needs to be brought up.
The APs wake up, do their firmware initialization and run the
low level kernel startup code including microcode loading in
parallel up to the first synchronization point. (#1 and #2
above)
2) Run the rest of the bringup code strictly serialized per CPU
(#3 - #5 above) as it's done today.
Parallelizing that stage of the CPU bringup might be possible
in theory, but it's questionable whether required surgery
would be justified for a pretty small gain.
If the system is large enough the first AP is already waiting at
the first synchronization point when the boot CPU finished the
wake-up of the last AP. That reduces the AP bringup time on that
SKL from ~800ms to ~80ms, i.e. by a factor ~10x.
The actual gain varies wildly depending on the system, CPU,
microcode patch size and other factors. There are some
opportunities to reduce the overhead further, but that needs some
deep surgery in the x86 CPU bringup code.
For now this is only enabled on x86, but the core functionality
obviously works for all SMP capable architectures.
- Enhancements for SMP function call tracing so it is possible to
locate the scheduling and the actual execution points. That allows
to measure IPI delivery time precisely"
* tag 'smp-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits)
trace,smp: Add tracepoints for scheduling remotelly called functions
trace,smp: Add tracepoints around remotelly called functions
MAINTAINERS: Add CPU HOTPLUG entry
x86/smpboot: Fix the parallel bringup decision
x86/realmode: Make stack lock work in trampoline_compat()
x86/smp: Initialize cpu_primary_thread_mask late
cpu/hotplug: Fix off by one in cpuhp_bringup_mask()
x86/apic: Fix use of X{,2}APIC_ENABLE in asm with older binutils
x86/smpboot/64: Implement arch_cpuhp_init_parallel_bringup() and enable it
x86/smpboot: Support parallel startup of secondary CPUs
x86/smpboot: Implement a bit spinlock to protect the realmode stack
x86/apic: Save the APIC virtual base address
cpu/hotplug: Allow "parallel" bringup up to CPUHP_BP_KICK_AP_STATE
x86/apic: Provide cpu_primary_thread mask
x86/smpboot: Enable split CPU startup
cpu/hotplug: Provide a split up CPUHP_BRINGUP mechanism
cpu/hotplug: Reset task stack state in _cpu_up()
cpu/hotplug: Remove unused state functions
riscv: Switch to hotplug core state synchronization
parisc: Switch to hotplug core state synchronization
...
- Core:
- Convert the interrupt descriptor storage to a maple tree to overcome
the limitations of the radixtree + fixed size bitmap. This allows to
handle real large servers with a huge number of guests without
imposing a huge memory overhead on everyone.
- Implement optional retriggering of interrupts which utilize the
fasteoi handler to work around a GICv3 architecture issue.
- Drivers:
- A set of fixes and updates for the Loongson/Loongarch related drivers.
- Workaound for an ASR8601 integration hickup which ends up with CPU
numbering which can't be represented in the GIC implementation.
- The usual set of boring fixes and updates all over the place.
-----BEGIN PGP SIGNATURE-----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=qKCo
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt subsystem:
Core:
- Convert the interrupt descriptor storage to a maple tree to
overcome the limitations of the radixtree + fixed size bitmap.
This allows us to handle very large servers with a huge number of
guests without imposing a huge memory overhead on everyone
- Implement optional retriggering of interrupts which utilize the
fasteoi handler to work around a GICv3 architecture issue
Drivers:
- A set of fixes and updates for the Loongson/Loongarch related
drivers
- Workaound for an ASR8601 integration hickup which ends up with CPU
numbering which can't be represented in the GIC implementation
- The usual set of boring fixes and updates all over the place"
* tag 'irq-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
Revert "irqchip/mxs: Include linux/irqchip/mxs.h"
irqchip/jcore-aic: Fix missing allocation of IRQ descriptors
irqchip/stm32-exti: Fix warning on initialized field overwritten
irqchip/stm32-exti: Add STM32MP15xx IWDG2 EXTI to GIC map
irqchip/gicv3: Add a iort_pmsi_get_dev_id() prototype
irqchip/mxs: Include linux/irqchip/mxs.h
irqchip/clps711x: Remove unused clps711x_intc_init() function
irqchip/mmp: Remove non-DT codepath
irqchip/ftintc010: Mark all function static
irqdomain: Include internals.h for function prototypes
irqchip/loongson-eiointc: Add DT init support
dt-bindings: interrupt-controller: Add Loongson EIOINTC
irqchip/loongson-eiointc: Fix irq affinity setting during resume
irqchip/loongson-liointc: Add IRQCHIP_SKIP_SET_WAKE flag
irqchip/loongson-liointc: Fix IRQ trigger polarity
irqchip/loongson-pch-pic: Fix potential incorrect hwirq assignment
irqchip/loongson-pch-pic: Fix initialization of HT vector register
irqchip/gic-v3-its: Enable RESEND_WHEN_IN_PROGRESS for LPIs
genirq: Allow fasteoi handler to resend interrupts on concurrent handling
genirq: Expand doc for PENDING and REPLAY flags
...
-----BEGIN PGP SIGNATURE-----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=zP4Y
-----END PGP SIGNATURE-----
Merge tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- Various cleanups all around (Irvin, Chaitanya, Christophe)
- Better struct packing (Christophe JAILLET)
- Reduce controller error logs for optional commands (Keith)
- Support for >=64KiB block sizes (Daniel Gomez)
- Fabrics fixes and code organization (Max, Chaitanya, Daniel
Wagner)
- bcache updates via Coly:
- Fix a race at init time (Mingzhe Zou)
- Misc fixes and cleanups (Andrea, Thomas, Zheng, Ye)
- use page pinning in the block layer for dio (David)
- convert old block dio code to page pinning (David, Christoph)
- cleanups for pktcdvd (Andy)
- cleanups for rnbd (Guoqing)
- use the unchecked __bio_add_page() for the initial single page
additions (Johannes)
- fix overflows in the Amiga partition handling code (Michael)
- improve mq-deadline zoned device support (Bart)
- keep passthrough requests out of the IO schedulers (Christoph, Ming)
- improve support for flush requests, making them less special to deal
with (Christoph)
- add bdev holder ops and shutdown methods (Christoph)
- fix the name_to_dev_t() situation and use cases (Christoph)
- decouple the block open flags from fmode_t (Christoph)
- ublk updates and cleanups, including adding user copy support (Ming)
- BFQ sanity checking (Bart)
- convert brd from radix to xarray (Pankaj)
- constify various structures (Thomas, Ivan)
- more fine grained persistent reservation ioctl capability checks
(Jingbo)
- misc fixes and cleanups (Arnd, Azeem, Demi, Ed, Hengqi, Hou, Jan,
Jordy, Li, Min, Yu, Zhong, Waiman)
* tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux: (266 commits)
scsi/sg: don't grab scsi host module reference
ext4: Fix warning in blkdev_put()
block: don't return -EINVAL for not found names in devt_from_devname
cdrom: Fix spectre-v1 gadget
block: Improve kernel-doc headers
blk-mq: don't insert passthrough request into sw queue
bsg: make bsg_class a static const structure
ublk: make ublk_chr_class a static const structure
aoe: make aoe_class a static const structure
block/rnbd: make all 'class' structures const
block: fix the exclusive open mask in disk_scan_partitions
block: add overflow checks for Amiga partition support
block: change all __u32 annotations to __be32 in affs_hardblocks.h
block: fix signed int overflow in Amiga partition support
block: add capacity validation in bdev_add_partition()
block: fine-granular CAP_SYS_ADMIN for Persistent Reservation
block: disallow Persistent Reservation on partitions
reiserfs: fix blkdev_put() warning from release_journal_dev()
block: fix wrong mode for blkdev_get_by_dev() from disk_scan_partitions()
block: document the holder argument to blkdev_get_by_path
...
-----BEGIN PGP SIGNATURE-----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=KhW4
-----END PGP SIGNATURE-----
Merge tag 'for-6.5/splice-2023-06-23' of git://git.kernel.dk/linux
Pull splice updates from Jens Axboe:
"This kills off ITER_PIPE to avoid a race between truncate,
iov_iter_revert() on the pipe and an as-yet incomplete DMA to a bio
with unpinned/unref'ed pages from an O_DIRECT splice read. This causes
memory corruption.
Instead, we either use (a) filemap_splice_read(), which invokes the
buffered file reading code and splices from the pagecache into the
pipe; (b) copy_splice_read(), which bulk-allocates a buffer, reads
into it and then pushes the filled pages into the pipe; or (c) handle
it in filesystem-specific code.
Summary:
- Rename direct_splice_read() to copy_splice_read()
- Simplify the calculations for the number of pages to be reclaimed
in copy_splice_read()
- Turn do_splice_to() into a helper, vfs_splice_read(), so that it
can be used by overlayfs and coda to perform the checks on the
lower fs
- Make vfs_splice_read() jump to copy_splice_read() to handle
direct-I/O and DAX
- Provide shmem with its own splice_read to handle non-existent pages
in the pagecache. We don't want a ->read_folio() as we don't want
to populate holes, but filemap_get_pages() requires it
- Provide overlayfs with its own splice_read to call down to a lower
layer as overlayfs doesn't provide ->read_folio()
- Provide coda with its own splice_read to call down to a lower layer
as coda doesn't provide ->read_folio()
- Direct ->splice_read to copy_splice_read() in tty, procfs, kernfs
and random files as they just copy to the output buffer and don't
splice pages
- Provide wrappers for afs, ceph, ecryptfs, ext4, f2fs, nfs, ntfs3,
ocfs2, orangefs, xfs and zonefs to do locking and/or revalidation
- Make cifs use filemap_splice_read()
- Replace pointers to generic_file_splice_read() with pointers to
filemap_splice_read() as DIO and DAX are handled in the caller;
filesystems can still provide their own alternate ->splice_read()
op
- Remove generic_file_splice_read()
- Remove ITER_PIPE and its paraphernalia as generic_file_splice_read
was the only user"
* tag 'for-6.5/splice-2023-06-23' of git://git.kernel.dk/linux: (31 commits)
splice: kdoc for filemap_splice_read() and copy_splice_read()
iov_iter: Kill ITER_PIPE
splice: Remove generic_file_splice_read()
splice: Use filemap_splice_read() instead of generic_file_splice_read()
cifs: Use filemap_splice_read()
trace: Convert trace/seq to use copy_splice_read()
zonefs: Provide a splice-read wrapper
xfs: Provide a splice-read wrapper
orangefs: Provide a splice-read wrapper
ocfs2: Provide a splice-read wrapper
ntfs3: Provide a splice-read wrapper
nfs: Provide a splice-read wrapper
f2fs: Provide a splice-read wrapper
ext4: Provide a splice-read wrapper
ecryptfs: Provide a splice-read wrapper
ceph: Provide a splice-read wrapper
afs: Provide a splice-read wrapper
9p: Add splice_read wrapper
net: Make sock_splice_read() use copy_splice_read() by default
tty, proc, kernfs, random: Use copy_splice_read()
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZJU4SwAKCRCRxhvAZXjc
ojOTAP9gT/z1gasIf8OwDHb4inZGnVpHh2ApKLvgMXH6ICtwRgD+OBtOcf438Lx1
cpFSTVJlh21QXMOOXWHe/LRUV2kZ5wI=
=zdfx
-----END PGP SIGNATURE-----
Merge tag 'v6.5/vfs.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Miscellaneous features, cleanups, and fixes for vfs and individual fs
Features:
- Use mode 0600 for file created by cachefilesd so it can be run by
unprivileged users. This aligns them with directories which are
already created with mode 0700 by cachefilesd
- Reorder a few members in struct file to prevent some false sharing
scenarios
- Indicate that an eventfd is used a semaphore in the eventfd's
fdinfo procfs file
- Add a missing uapi header for eventfd exposing relevant uapi
defines
- Let the VFS protect transitions of a superblock from read-only to
read-write in addition to the protection it already provides for
transitions from read-write to read-only. Protecting read-only to
read-write transitions allows filesystems such as ext4 to perform
internal writes, keeping writers away until the transition is
completed
Cleanups:
- Arnd removed the architecture specific arch_report_meminfo()
prototypes and added a generic one into procfs.h. Note, we got a
report about a warning in amdpgpu codepaths that suggested this was
bisectable to this change but we concluded it was a false positive
- Remove unused parameters from split_fs_names()
- Rename put_and_unmap_page() to unmap_and_put_page() to let the name
reflect the order of the cleanup operation that has to unmap before
the actual put
- Unexport buffer_check_dirty_writeback() as it is not used outside
of block device aops
- Stop allocating aio rings from highmem
- Protecting read-{only,write} transitions in the VFS used open-coded
barriers in various places. Replace them with proper little helpers
and document both the helpers and all barrier interactions involved
when transitioning between read-{only,write} states
- Use flexible array members in old readdir codepaths
Fixes:
- Use the correct type __poll_t for epoll and eventfd
- Replace all deprecated strlcpy() invocations, whose return value
isn't checked with an equivalent strscpy() call
- Fix some kernel-doc warnings in fs/open.c
- Reduce the stack usage in jffs2's xattr codepaths finally getting
rid of this: fs/jffs2/xattr.c:887:1: error: the frame size of 1088
bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
royally annoying compilation warning
- Use __FMODE_NONOTIFY instead of FMODE_NONOTIFY where an int and not
fmode_t is required to avoid fmode_t to integer degradation
warnings
- Create coredumps with O_WRONLY instead of O_RDWR. There's a long
explanation in that commit how O_RDWR is actually a bug which we
found out with the help of Linus and git archeology
- Fix "no previous prototype" warnings in the pipe codepaths
- Add overflow calculations for remap_verify_area() as a signed
addition overflow could be triggered in xfstests
- Fix a null pointer dereference in sysv
- Use an unsigned variable for length calculations in jfs avoiding
compilation warnings with gcc 13
- Fix a dangling pipe pointer in the watch queue codepath
- The legacy mount option parser provided as a fallback by the VFS
for filesystems not yet converted to the new mount api did prefix
the generated mount option string with a leading ',' causing issues
for some filesystems
- Fix a repeated word in a comment in fs.h
- autofs: Update the ctime when mtime is updated as mandated by
POSIX"
* tag 'v6.5/vfs.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (27 commits)
readdir: Replace one-element arrays with flexible-array members
fs: Provide helpers for manipulating sb->s_readonly_remount
fs: Protect reconfiguration of sb read-write from racing writes
eventfd: add a uapi header for eventfd userspace APIs
autofs: set ctime as well when mtime changes on a dir
eventfd: show the EFD_SEMAPHORE flag in fdinfo
fs/aio: Stop allocating aio rings from HIGHMEM
fs: Fix comment typo
fs: unexport buffer_check_dirty_writeback
fs: avoid empty option when generating legacy mount string
watch_queue: prevent dangling pipe pointer
fs.h: Optimize file struct to prevent false sharing
highmem: Rename put_and_unmap_page() to unmap_and_put_page()
cachefiles: Allow the cache to be non-root
init: remove unused names parameter in split_fs_names()
jfs: Use unsigned variable for length calculations
fs/sysv: Null check to prevent null-ptr-deref bug
fs: use UB-safe check for signed addition overflow in remap_verify_area
procfs: consolidate arch_report_meminfo declaration
fs: pipe: reveal missing function protoypes
...
Merge updates related to system-wide power management and generic power
domains (genpd) updates for 6.5-rc1:
- Fix the handling of pm_suspend_target_state when CONFIG_PM is unset
(Kai-Heng Feng).
- Correct spelling mistake in a comment in the hibernation code (Wang
Honghui).
- Add arch_resume_nosmt() prototype to avoid a "missing prototypes"
build warning (Arnd Bergmann).
- Restrict pm_pr_dbg() to system-wide power transitions and use it in
a few additional places (Mario Limonciello).
- Drop verification of in-params from genpd_add_device() and ensure
that all of its callers will do it (Ulf Hansson).
- Prevent possible integer overflows from occurring in
genpd_parse_state() (Nikita Zhandarovich).
* pm-sleep:
platform/x86/amd: pmc: Use pm_pr_dbg() for suspend related messages
pinctrl: amd: Use pm_pr_dbg to show debugging messages
ACPI: x86: Add pm_debug_messages for LPS0 _DSM state tracking
include/linux/suspend.h: Only show pm_pr_dbg messages at suspend/resume
PM: suspend: add a arch_resume_nosmt() prototype
PM: hibernate: Correct spelling mistake in a comment
PM: suspend: Fix pm_suspend_target_state handling for !CONFIG_PM
* pm-domains:
PM: domains: Move the verification of in-params from genpd_add_device()
PM: domains: fix integer overflow issues in genpd_parse_state()
- A number of Loogson/Loogarch fixes
- Allow the core code to retrigger an interrupt that has
fired while the same interrupt is being handled on another
CPU, papering over a GICv3 architecture issue
- Work around an integration problem on ASR8601, where the CPU
numbering isn't representable in the GIC implementation...
- Add some missing interrupt to the STM32 irqchip
- A bunch of warning squashing triggered by W=1 builds
-----BEGIN PGP SIGNATURE-----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=quHC
-----END PGP SIGNATURE-----
Merge tag 'irqchip-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates from Marc Zyngier:
- A number of Loogson/Loogarch fixes
- Allow the core code to retrigger an interrupt that has
fired while the same interrupt is being handled on another
CPU, papering over a GICv3 architecture issue
- Work around an integration problem on ASR8601, where the CPU
numbering isn't representable in the GIC implementation...
- Add some missing interrupt to the STM32 irqchip
- A bunch of warning squashing triggered by W=1 builds
Link: https://lore.kernel.org/r/20230623224345.3577134-1-maz@kernel.org
Pick up initial support for the CXL 3.0 performance monitoring
definition. Small conflicts with the firmware update work as they both
placed their init code in the same location.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZJX+ygAKCRDbK58LschI
g0/2AQDHg12smf9mPfK9wOFDNRIIX8r2iufB8LUFQMzCwltN6gEAkAdkAyfbof7P
TMaNUiHABijAFtChxoSI35j3OOSRrwE=
=GJgN
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-06-23
We've added 49 non-merge commits during the last 24 day(s) which contain
a total of 70 files changed, 1935 insertions(+), 442 deletions(-).
The main changes are:
1) Extend bpf_fib_lookup helper to allow passing the route table ID,
from Louis DeLosSantos.
2) Fix regsafe() in verifier to call check_ids() for scalar registers,
from Eduard Zingerman.
3) Extend the set of cpumask kfuncs with bpf_cpumask_first_and()
and a rework of bpf_cpumask_any*() kfuncs. Additionally,
add selftests, from David Vernet.
4) Fix socket lookup BPF helpers for tc/XDP to respect VRF bindings,
from Gilad Sever.
5) Change bpf_link_put() to use workqueue unconditionally to fix it
under PREEMPT_RT, from Sebastian Andrzej Siewior.
6) Follow-ups to address issues in the bpf_refcount shared ownership
implementation, from Dave Marchevsky.
7) A few general refactorings to BPF map and program creation permissions
checks which were part of the BPF token series, from Andrii Nakryiko.
8) Various fixes for benchmark framework and add a new benchmark
for BPF memory allocator to BPF selftests, from Hou Tao.
9) Documentation improvements around iterators and trusted pointers,
from Anton Protopopov.
10) Small cleanup in verifier to improve allocated object check,
from Daniel T. Lee.
11) Improve performance of bpf_xdp_pointer() by avoiding access
to shared_info when XDP packet does not have frags,
from Jesper Dangaard Brouer.
12) Silence a harmless syzbot-reported warning in btf_type_id_size(),
from Yonghong Song.
13) Remove duplicate bpfilter_umh_cleanup in favor of umd_cleanup_helper,
from Jarkko Sakkinen.
14) Fix BPF selftests build for resolve_btfids under custom HOSTCFLAGS,
from Viktor Malik.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (49 commits)
bpf, docs: Document existing macros instead of deprecated
bpf, docs: BPF Iterator Document
selftests/bpf: Fix compilation failure for prog vrf_socket_lookup
selftests/bpf: Add vrf_socket_lookup tests
bpf: Fix bpf socket lookup from tc/xdp to respect socket VRF bindings
bpf: Call __bpf_sk_lookup()/__bpf_skc_lookup() directly via TC hookpoint
bpf: Factor out socket lookup functions for the TC hookpoint.
selftests/bpf: Set the default value of consumer_cnt as 0
selftests/bpf: Ensure that next_cpu() returns a valid CPU number
selftests/bpf: Output the correct error code for pthread APIs
selftests/bpf: Use producer_cnt to allocate local counter array
xsk: Remove unused inline function xsk_buff_discard()
bpf: Keep BPF_PROG_LOAD permission checks clear of validations
bpf: Centralize permissions checks for all BPF map types
bpf: Inline map creation logic in map_create() function
bpf: Move unprivileged checks into map_create() and bpf_prog_load()
bpf: Remove in_atomic() from bpf_link_put().
selftests/bpf: Verify that check_ids() is used for scalars in regsafe()
bpf: Verify scalar ids mapping in regsafe() using check_ids()
selftests/bpf: Check if mark_chain_precision() follows scalar ids
...
====================
Link: https://lore.kernel.org/r/20230623211256.8409-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dave Airlie reports that gcc-13.1.1 has started complaining about some
of the workqueue code in 32-bit arm builds:
kernel/workqueue.c: In function ‘get_work_pwq’:
kernel/workqueue.c:713:24: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
713 | return (void *)(data & WORK_STRUCT_WQ_DATA_MASK);
| ^
[ ... a couple of other cases ... ]
and while it's not immediately clear exactly why gcc started complaining
about it now, I suspect it's some C23-induced enum type handlign fixup in
gcc-13 is the cause.
Whatever the reason for starting to complain, the code and data types
are indeed disgusting enough that the complaint is warranted.
The wq code ends up creating various "helper constants" (like that
WORK_STRUCT_WQ_DATA_MASK) using an enum type, which is all kinds of
confused. The mask needs to be 'unsigned long', not some unspecified
enum type.
To make matters worse, the actual "mask and cast to a pointer" is
repeated a couple of times, and the cast isn't even always done to the
right pointer, but - as the error case above - to a 'void *' with then
the compiler finishing the job.
That's now how we roll in the kernel.
So create the masks using the proper types rather than some ambiguous
enumeration, and use a nice helper that actually does the type
conversion in one well-defined place.
Incidentally, this magically makes clang generate better code. That,
admittedly, is really just a sign of clang having been seriously
confused before, and cleaning up the typing unconfuses the compiler too.
Reported-by: Dave Airlie <airlied@gmail.com>
Link: https://lore.kernel.org/lkml/CAPM=9twNnV4zMCvrPkw3H-ajZOH-01JVh_kDrxdPYQErz8ZTdA@mail.gmail.com/
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To hide the first dummy 'data' argument on the tracepoint probe events,
the BTF argument array was modified (skip the first argument for tracepoint),
but the '$arg*' meta argument parser missed that.
Fix to increment the argument index if it is tracepoint probe. And decrement
the index when searching the type of the argument.
Link: https://lore.kernel.org/all/168657113778.3038017.12245893750241701312.stgit@mhiramat.roam.corp.google.com/
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
mptcp and netfilter.
Current release - regressions:
- netfilter: add NFT_TRANS_PREPARE_ERROR to deal with bound set/chain
- eth: mlx5e:
- fix scheduling of IPsec ASO query while in atomic
- free IRQ rmap and notifier on kernel shutdown
Current release - new code bugs:
- phy: manual remove LEDs to ensure correct ordering
Previous releases - regressions:
- mptcp: fix possible divide by zero in recvmsg()
- dsa: revert "net: phy: dp83867: perform soft reset and retain established link"
Previous releases - always broken:
- sched: netem: acquire qdisc lock in netem_change()
- bpf:
- fix verifier id tracking of scalars on spill
- fix NULL dereference on exceptions
- accept function names that contain dots
- netfilter: disallow element updates of bound anonymous sets
- mptcp: ensure listener is unhashed before updating the sk status
- xfrm:
- add missed call to delete offloaded policies
- fix inbound ipv4/udp/esp packets to UDPv6 dualstack sockets
- selftests: fixes for FIPS mode
- dsa: mt7530: fix multiple CPU ports, BPDU and LLDP handling
- eth: sfc: use budget for TX completions
Misc:
- wifi: iwlwifi: add support for SO-F device with PCI id 0x7AF0
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=GH2b
-----END PGP SIGNATURE-----
Merge tag 'net-6.4-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from ipsec, bpf, mptcp and netfilter.
Current release - regressions:
- netfilter: add NFT_TRANS_PREPARE_ERROR to deal with bound set/chain
- eth: mlx5e:
- fix scheduling of IPsec ASO query while in atomic
- free IRQ rmap and notifier on kernel shutdown
Current release - new code bugs:
- phy: manual remove LEDs to ensure correct ordering
Previous releases - regressions:
- mptcp: fix possible divide by zero in recvmsg()
- dsa: revert "net: phy: dp83867: perform soft reset and retain
established link"
Previous releases - always broken:
- sched: netem: acquire qdisc lock in netem_change()
- bpf:
- fix verifier id tracking of scalars on spill
- fix NULL dereference on exceptions
- accept function names that contain dots
- netfilter: disallow element updates of bound anonymous sets
- mptcp: ensure listener is unhashed before updating the sk status
- xfrm:
- add missed call to delete offloaded policies
- fix inbound ipv4/udp/esp packets to UDPv6 dualstack sockets
- selftests: fixes for FIPS mode
- dsa: mt7530: fix multiple CPU ports, BPDU and LLDP handling
- eth: sfc: use budget for TX completions
Misc:
- wifi: iwlwifi: add support for SO-F device with PCI id 0x7AF0"
* tag 'net-6.4-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (74 commits)
revert "net: align SO_RCVMARK required privileges with SO_MARK"
net: wwan: iosm: Convert single instance struct member to flexible array
sch_netem: acquire qdisc lock in netem_change()
selftests: forwarding: Fix race condition in mirror installation
wifi: mac80211: report all unusable beacon frames
mptcp: ensure listener is unhashed before updating the sk status
mptcp: drop legacy code around RX EOF
mptcp: consolidate fallback and non fallback state machine
mptcp: fix possible list corruption on passive MPJ
mptcp: fix possible divide by zero in recvmsg()
mptcp: handle correctly disconnect() failures
bpf: Force kprobe multi expected_attach_type for kprobe_multi link
bpf/btf: Accept function names that contain dots
Revert "net: phy: dp83867: perform soft reset and retain established link"
net: mdio: fix the wrong parameters
netfilter: nf_tables: Fix for deleting base chains with payload
netfilter: nfnetlink_osf: fix module autoload
netfilter: nf_tables: drop module reference after updating chain
netfilter: nf_tables: disallow timeout for anonymous sets
netfilter: nf_tables: disallow updates of anonymous sets
...
It's late but here are two bug fixes. Both fix problems which can be severe
but are very confined in scope. The risk to most use cases should be
minimal.
* Fix for an old bug which triggers if a cgroup subsystem is remounted to a
different hierarchy while someone is reading its cgroup.procs/tasks file.
The risk is pretty low given how seldom cgroup subsystems are moved across
hierarchies.
* We moved cpus_read_lock() outside of cgroup internal locks a while ago but
forgot to update the legacy_freezer leading to lockdep triggers. Fixed.
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZJNz6g4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGS9zAP9lGszI1Zgvjz+qlU0dmE96yUEuqEg7Tfwcqxr3
Y+hHyAEArgNGnCoPfu4NAWQDZ31AgPUdL8EFqx6pY9Vq9R0oFg0=
=uaB+
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.4-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
"It's late but here are two bug fixes. Both fix problems which can be
severe but are very confined in scope. The risk to most use cases
should be minimal.
- Fix for an old bug which triggers if a cgroup subsystem is
remounted to a different hierarchy while someone is reading its
cgroup.procs/tasks file. The risk is pretty low given how seldom
cgroup subsystems are moved across hierarchies.
- We moved cpus_read_lock() outside of cgroup internal locks a while
ago but forgot to update the legacy_freezer leading to lockdep
triggers. Fixed"
* tag 'cgroup-for-6.4-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Do not corrupt task iteration when rebinding subsystem
cgroup,freezer: hold cpu_hotplug_lock before freezer_mutex in freezer_css_{online,offline}()
This reverts commit 36de5f303c.
The commit caused boot failures on some configurations due to cgroup
hierarchies not being created at all.
Signed-off-by: Tejun Heo <tj@kernel.org>
Source file locations for syscall definitions can change over a period
of time. File paths in comments get stale and are hard to maintain long
term. Also, their usefulness is questionable since it would be easier to
locate a syscall definition using the SYSCALL_DEFINEx() macro.
Remove all source file path comments from the syscall headers. Also,
equalize the uneven line spacing (some of which is introduced due to the
deletions).
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
Direct replacement is safe here since return value of -E2BIG
is used to check for truncation instead of sizeof(dest).
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Link: https://lore.kernel.org/linux-trace-kernel/20230613004125.3539934-1-azeemshaikh38@gmail.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Going a step further, we propose a way to use any user-space
workload as the task waiting for the timerlat timer. This is done
via a per-CPU file named osnoise/cpu$id/timerlat_fd file.
The tracef_fd allows a task to open at a time. When a task reads
the file, the timerlat timer is armed for future osnoise/timerlat_period_us
time. When the timer fires, it prints the IRQ latency and
wakes up the user-space thread waiting in the timerlat_fd.
The thread then starts to run, executes the timerlat measurement, prints
the thread scheduling latency and returns to user-space.
When the thread rereads the timerlat_fd, the tracer will print the
user-ret(urn) latency, which is an additional metric.
This additional metric is also traced by the tracer and can be used, for
example of measuring the context switch overhead from kernel-to-user and
user-to-kernel, or the response time for an arbitrary execution in
user-space.
The tracer supports one thread per CPU, the thread must be pinned to
the CPU, and it cannot migrate while holding the timerlat_fd. The reason
is that the tracer is per CPU (nothing prohibits the tracer from
allowing migrations in the future). The tracer monitors the migration
of the thread and disables the tracer if detected.
The timerlat_fd is only available for opening/reading when timerlat
tracer is enabled, and NO_OSNOISE_WORKLOAD is set.
The simplest way to activate this feature from user-space is:
-------------------------------- %< -----------------------------------
int main(void)
{
char buffer[1024];
int timerlat_fd;
int retval;
long cpu = 0; /* place in CPU 0 */
cpu_set_t set;
CPU_ZERO(&set);
CPU_SET(cpu, &set);
if (sched_setaffinity(gettid(), sizeof(set), &set) == -1)
return 1;
snprintf(buffer, sizeof(buffer),
"/sys/kernel/tracing/osnoise/per_cpu/cpu%ld/timerlat_fd",
cpu);
timerlat_fd = open(buffer, O_RDONLY);
if (timerlat_fd < 0) {
printf("error opening %s: %s\n", buffer, strerror(errno));
exit(1);
}
for (;;) {
retval = read(timerlat_fd, buffer, 1024);
if (retval < 0)
break;
}
close(timerlat_fd);
exit(0);
}
-------------------------------- >% -----------------------------------
When disabling timerlat, if there is a workload holding the timerlat_fd,
the SIGKILL will be sent to the thread.
Link: https://lkml.kernel.org/r/69fe66a863d2792ff4c3a149bf9e32e26468bb3a.1686063934.git.bristot@kernel.org
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: William White <chwhite@redhat.com>
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In the case of all tracing instances being off, sleep for the entire
period.
Q: Why not kill all threads so?
A: It is valid and useful to start the threads with tracing off.
For example, rtla disables tracing, starts the tracer, applies the
scheduling setup to the threads, e.g., sched priority and cgroup,
and then begin tracing with all set.
Skipping the period helps to speed up rtla setup and save the
trace after a stop tracing.
Link: https://lkml.kernel.org/r/aa4dd9b7e76fcb63901fe5407e15ec002b318599.1686063934.git.bristot@kernel.org
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: William White <chwhite@redhat.com>
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently, osnoise/timerlat threads run with PF_NO_SETAFFINITY set.
It works well, however, cgroups do not allow PF_NO_SETAFFINITY threads
to be accepted, and this creates a limitation to osnoise/timerlat.
To avoid this limitation, disable migration of the threads as soon
as they start to run, and then clean the PF_NO_SETAFFINITY flag (still)
used during thread creation.
If for some reason a thread migration is requested, e.g., via
sched_settafinity, the tracer thread will notice and exit.
Link: https://lkml.kernel.org/r/8ba8bc9c15b3ea40cf73cf67a9bc061a264609f0.1686063934.git.bristot@kernel.org
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: William White <chwhite@redhat.com>
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Adding new available_filter_functions_addrs file that shows all available
functions (same as available_filter_functions) together with addresses,
like:
# cat available_filter_functions_addrs | head
ffffffff81000770 __traceiter_initcall_level
ffffffff810007c0 __traceiter_initcall_start
ffffffff81000810 __traceiter_initcall_finish
ffffffff81000860 trace_initcall_finish_cb
...
Note displayed address is the patch-site address and can differ from
/proc/kallsyms address.
It's useful to have address avilable for traceable symbols, so we don't
need to allways cross check kallsyms with available_filter_functions
(or the other way around) and have all the data in single file.
For backwards compatibility reasons we can't change the existing
available_filter_functions file output, but we need to add new file.
The problem is that we need to do 2 passes:
- through available_filter_functions and find out if the function is traceable
- through /proc/kallsyms to get the address for traceable function
Having available_filter_functions symbols together with addresses allow
us to skip the kallsyms step and we are ok with the address in
available_filter_functions_addr not being the function entry, because
kprobe_multi uses fprobe and that handles both entry and patch-site
address properly.
We have 2 interfaces how to create kprobe_multi link:
a) passing symbols to kernel
1) user gathers symbols and need to ensure that they are
trace-able -> pass through available_filter_functions file
2) kernel takes those symbols and translates them to addresses
through kallsyms api
3) addresses are passed to fprobe/ftrace through:
register_fprobe_ips
-> ftrace_set_filter_ips
b) passing addresses to kernel
1) user gathers symbols and needs to ensure that they are
trace-able -> pass through available_filter_functions file
2) user takes those symbols and translates them to addresses
through /proc/kallsyms
3) addresses are passed to the kernel and kernel calls:
register_fprobe_ips
-> ftrace_set_filter_ips
The new available_filter_functions_addrs file helps us with option b),
because we can make 'b 1' and 'b 2' in one step - while filtering traceable
functions, we get the address directly.
Link: https://lore.kernel.org/linux-trace-kernel/20230611130029.1202298-1-jolsa@kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Tested-by: Jackie Liu <liuyun01@kylinos.cn> # x86
Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Commit 7b4537199a ("kbuild: link symbol CRCs at final link, removing
CONFIG_MODULE_REL_CRCS") made modpost output CRCs in the same way
whether the EXPORT_SYMBOL() is placed in *.c or *.S.
For further cleanups, this commit applies a similar approach to the
entire data structure of EXPORT_SYMBOL().
The EXPORT_SYMBOL() compilation is split into two stages.
When a source file is compiled, EXPORT_SYMBOL() will be converted into
a dummy symbol in the .export_symbol section.
For example,
EXPORT_SYMBOL(foo);
EXPORT_SYMBOL_NS_GPL(bar, BAR_NAMESPACE);
will be encoded into the following assembly code:
.section ".export_symbol","a"
__export_symbol_foo:
.asciz "" /* license */
.asciz "" /* name space */
.balign 8
.quad foo /* symbol reference */
.previous
.section ".export_symbol","a"
__export_symbol_bar:
.asciz "GPL" /* license */
.asciz "BAR_NAMESPACE" /* name space */
.balign 8
.quad bar /* symbol reference */
.previous
They are mere markers to tell modpost the name, license, and namespace
of the symbols. They will be dropped from the final vmlinux and modules
because the *(.export_symbol) will go into /DISCARD/ in the linker script.
Then, modpost extracts all the information about EXPORT_SYMBOL() from the
.export_symbol section, and generates the final C code:
KSYMTAB_FUNC(foo, "", "");
KSYMTAB_FUNC(bar, "_gpl", "BAR_NAMESPACE");
KSYMTAB_FUNC() (or KSYMTAB_DATA() if it is data) is expanded to struct
kernel_symbol that will be linked to the vmlinux or a module.
With this change, EXPORT_SYMBOL() works in the same way for *.c and *.S
files, providing the following benefits.
[1] Deprecate EXPORT_DATA_SYMBOL()
In the old days, EXPORT_SYMBOL() was only available in C files. To export
a symbol in *.S, EXPORT_SYMBOL() was placed in a separate *.c file.
arch/arm/kernel/armksyms.c is one example written in the classic manner.
Commit 22823ab419 ("EXPORT_SYMBOL() for asm") removed this limitation.
Since then, EXPORT_SYMBOL() can be placed close to the symbol definition
in *.S files. It was a nice improvement.
However, as that commit mentioned, you need to use EXPORT_DATA_SYMBOL()
for data objects on some architectures.
In the new approach, modpost checks symbol's type (STT_FUNC or not),
and outputs KSYMTAB_FUNC() or KSYMTAB_DATA() accordingly.
There are only two users of EXPORT_DATA_SYMBOL:
EXPORT_DATA_SYMBOL_GPL(empty_zero_page) (arch/ia64/kernel/head.S)
EXPORT_DATA_SYMBOL(ia64_ivt) (arch/ia64/kernel/ivt.S)
They are transformed as follows and output into .vmlinux.export.c
KSYMTAB_DATA(empty_zero_page, "_gpl", "");
KSYMTAB_DATA(ia64_ivt, "", "");
The other EXPORT_SYMBOL users in ia64 assembly are output as
KSYMTAB_FUNC().
EXPORT_DATA_SYMBOL() is now deprecated.
[2] merge <linux/export.h> and <asm-generic/export.h>
There are two similar header implementations:
include/linux/export.h for .c files
include/asm-generic/export.h for .S files
Ideally, the functionality should be consistent between them, but they
tend to diverge.
Commit 8651ec01da ("module: add support for symbol namespaces.") did
not support the namespace for *.S files.
This commit shifts the essential implementation part to C, which supports
EXPORT_SYMBOL_NS() for *.S files.
<asm/export.h> and <asm-generic/export.h> will remain as a wrapper of
<linux/export.h> for a while.
They will be removed after #include <asm/export.h> directives are all
replaced with #include <linux/export.h>.
[3] Implement CONFIG_TRIM_UNUSED_KSYMS in one-pass algorithm (by a later commit)
When CONFIG_TRIM_UNUSED_KSYMS is enabled, Kbuild recursively traverses
the directory tree to determine which EXPORT_SYMBOL to trim. If an
EXPORT_SYMBOL turns out to be unused by anyone, Kbuild begins the
second traverse, where some source files are recompiled with their
EXPORT_SYMBOL() tuned into a no-op.
We can do this better now; modpost can selectively emit KSYMTAB entries
that are really used by modules.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Sparse warns about lock imbalance vs. the hrtimer_base lock due to missing
sparse annotations:
kernel/time/hrtimer.c:175:33: warning: context imbalance in 'lock_hrtimer_base' - wrong count at exit
kernel/time/hrtimer.c:1301:28: warning: context imbalance in 'hrtimer_start_range_ns' - unexpected unlock
kernel/time/hrtimer.c:1336:28: warning: context imbalance in 'hrtimer_try_to_cancel' - unexpected unlock
kernel/time/hrtimer.c:1457:9: warning: context imbalance in '__hrtimer_get_remaining' - unexpected unlock
Add the annotations to the relevant functions.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230621075928.394481-1-ben.dooks@codethink.co.uk
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZJK5DwAKCRDbK58LschI
gyUtAQD4gT4BEVHRqvniw9yyqYo0BvElAznutDq7o9kFHFep2gEAoksEWS84OdZj
0L5mSKjXrpHKzmY/jlMrVIcTb3VzOw0=
=gAYE
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-06-21
We've added 7 non-merge commits during the last 14 day(s) which contain
a total of 7 files changed, 181 insertions(+), 15 deletions(-).
The main changes are:
1) Fix a verifier id tracking issue with scalars upon spill,
from Maxim Mikityanskiy.
2) Fix NULL dereference if an exception is generated while a BPF
subprogram is running, from Krister Johansen.
3) Fix a BTF verification failure when compiling kernel with LLVM_IAS=0,
from Florent Revest.
4) Fix expected_attach_type enforcement for kprobe_multi link,
from Jiri Olsa.
5) Fix a bpf_jit_dump issue for x86_64 to pick the correct JITed image,
from Yonghong Song.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Force kprobe multi expected_attach_type for kprobe_multi link
bpf/btf: Accept function names that contain dots
selftests/bpf: add a test for subprogram extables
bpf: ensure main program has an extable
bpf: Fix a bpf_jit_dump issue for x86_64 with sysctl bpf_jit_enable.
selftests/bpf: Add test cases to assert proper ID tracking on spill
bpf: Fix verifier id tracking of scalars on spill
====================
Link: https://lore.kernel.org/r/20230621101116.16122-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hello,
This patch is to expose misc.current on cgroup v2 root for tracking
how much of the resource has been consumed in total on the system.
Most of the cloud infrastucture use cgroup to fetch the host
information for scheduling purpose.
Currently, the misc controller can be used by Intel TDX HKIDs and
AMD SEV ASIDs, which are both used for creating encrypted VMs.
Intel TDX and AMD SEV are mostly be used by the cloud providers
for providing confidential VMs.
In actual use of a server, these confidential VMs may be launched
in different ways. For the cloud solution, there are kubvirt and
coco (tracked by kubepods.slice); on host, they can be booted
directly through qemu by end user (tracked by user.slice), etc.
In this complex environment, when wanting to know how many resource
is used in total it has to iterate through all existing slices to
get the value of each misc.current and add them up to calculate
the total number of consumed keys.
So exposing misc.current to root cgroup tends to give much easier
when calculates how much resource has been used in total, which
helps to schedule and count resources for the cloud infrastucture.
Signed-off-by: LeiZhou-97 <lei.zhou@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Address the following -Wstringop-overflow warnings seen when
built with ARM architecture and aspeed_g4_defconfig configuration
(notice that under this configuration CGROUP_SUBSYS_COUNT == 0):
kernel/cgroup/cgroup.c:1208:16: warning: 'find_existing_css_set' accessing 4 bytes in a region of size 0 [-Wstringop-overflow=]
kernel/cgroup/cgroup.c:1258:15: warning: 'css_set_hash' accessing 4 bytes in a region of size 0 [-Wstringop-overflow=]
kernel/cgroup/cgroup.c:6089:18: warning: 'css_set_hash' accessing 4 bytes in a region of size 0 [-Wstringop-overflow=]
kernel/cgroup/cgroup.c:6153:18: warning: 'css_set_hash' accessing 4 bytes in a region of size 0 [-Wstringop-overflow=]
These changes are based on commit d20d30ebb1 ("cgroup: Avoid compiler
warnings with no subsystems").
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
For a long time the tick was aligned to clock MONOTONIC so that the tick
event happened at a multiple of nanoseconds per tick starting from clock
MONOTONIC = 0.
At some point this changed as the refined jiffies clocksource which is
used during boot before the TSC or other clocksources becomes usable, was
adjusted with a boot offset, so that time 0 is closer to the point where
the kernel starts.
This broke the assumption in the tick code that when the tick setup
happens early on ktime_get() will return a multiple of nanoseconds per
tick. As a consequence applications which aligned their periodic
execution so that it does not collide with the tick were not longer
guaranteed that the tick period starts from time 0.
The fix for this regression was to realign the tick when it is initially
set up to a multiple of tick periods. That works as long as the
underlying tick device supports periodic mode, but breaks under certain
conditions when the tick device supports only one shot mode.
Depending on the offset, the alignment delta to clock MONOTONIC can get
in a range where the minimal programming delta of the underlying clock
event device is larger than the calculated delta to the next tick. This
results in a boot hang as the tick code tries to play catch up, but as
the tick never fires jiffies are not advanced so it keeps trying for
ever.
Solve this by moving the tick alignement into the NOHZ / HIGHRES
enablement code because at that point it is guaranteed that the
underlying clocksource is high resolution capable and not longer
depending on the tick.
This is far before user space starts, so at the point where applications
try to align their timers, the old behaviour of the tick happening at a
multiple of nanoseconds per tick starting from clock MONOTONIC = 0 is
restored.
-----BEGIN PGP SIGNATURE-----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=/uvx
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2023-06-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A single regression fix for a regression fix:
For a long time the tick was aligned to clock MONOTONIC so that the
tick event happened at a multiple of nanoseconds per tick starting
from clock MONOTONIC = 0.
At some point this changed as the refined jiffies clocksource which is
used during boot before the TSC or other clocksources becomes usable,
was adjusted with a boot offset, so that time 0 is closer to the point
where the kernel starts.
This broke the assumption in the tick code that when the tick setup
happens early on ktime_get() will return a multiple of nanoseconds per
tick. As a consequence applications which aligned their periodic
execution so that it does not collide with the tick were not longer
guaranteed that the tick period starts from time 0.
The fix for this regression was to realign the tick when it is
initially set up to a multiple of tick periods. That works as long as
the underlying tick device supports periodic mode, but breaks under
certain conditions when the tick device supports only one shot mode.
Depending on the offset, the alignment delta to clock MONOTONIC can
get in a range where the minimal programming delta of the underlying
clock event device is larger than the calculated delta to the next
tick. This results in a boot hang as the tick code tries to play catch
up, but as the tick never fires jiffies are not advanced so it keeps
trying for ever.
Solve this by moving the tick alignement into the NOHZ / HIGHRES
enablement code because at that point it is guaranteed that the
underlying clocksource is high resolution capable and not longer
depending on the tick.
This is far before user space starts, so at the point where
applications try to align their timers, the old behaviour of the tick
happening at a multiple of nanoseconds per tick starting from clock
MONOTONIC = 0 is restored"
* tag 'timers-urgent-2023-06-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/common: Align tick period during sched_timer setup
The debug feature is supported since commit 8cc38fa7fa ("cgroup: make
debug an implicit controller on cgroup2"), update corresponding comment.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
* irq/misc-6.5:
: .
: Misc cleanups:
:
: - Add a number of missing prototypes
: - Mark global symbol as static where needed
: - Drop some now useless non-DT code paths
: - Add a missing interrupt mapping to the STM32 irqchip
: - Silence another STM32 warning when building with W=1
: - Fix the jcore-aic driver that actually never worked...
: .
Revert "irqchip/mxs: Include linux/irqchip/mxs.h"
irqchip/jcore-aic: Fix missing allocation of IRQ descriptors
irqchip/stm32-exti: Fix warning on initialized field overwritten
irqchip/stm32-exti: Add STM32MP15xx IWDG2 EXTI to GIC map
irqchip/gicv3: Add a iort_pmsi_get_dev_id() prototype
irqchip/mxs: Include linux/irqchip/mxs.h
irqchip/clps711x: Remove unused clps711x_intc_init() function
irqchip/mmp: Remove non-DT codepath
irqchip/ftintc010: Mark all function static
irqdomain: Include internals.h for function prototypes
Signed-off-by: Marc Zyngier <maz@kernel.org>
We currently allow to create perf link for program with
expected_attach_type == BPF_TRACE_KPROBE_MULTI.
This will cause crash when we call helpers like get_attach_cookie or
get_func_ip in such program, because it will call the kprobe_multi's
version (current->bpf_ctx context setup) of those helpers while it
expects perf_link's current->bpf_ctx context setup.
Making sure that we use BPF_TRACE_KPROBE_MULTI expected_attach_type
only for programs attaching through kprobe_multi link.
Fixes: ca74823c6e ("bpf: Add cookie support to programs attached with kprobe multi link")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230618131414.75649-1-jolsa@kernel.org
When building a kernel with LLVM=1, LLVM_IAS=0 and CONFIG_KASAN=y, LLVM
leaves DWARF tags for the "asan.module_ctor" & co symbols. In turn,
pahole creates BTF_KIND_FUNC entries for these and this makes the BTF
metadata validation fail because they contain a dot.
In a dramatic turn of event, this BTF verification failure can cause
the netfilter_bpf initialization to fail, causing netfilter_core to
free the netfilter_helper hashmap and netfilter_ftp to trigger a
use-after-free. The risk of u-a-f in netfilter will be addressed
separately but the existence of "asan.module_ctor" debug info under some
build conditions sounds like a good enough reason to accept functions
that contain dots in BTF.
Although using only LLVM=1 is the recommended way to compile clang-based
kernels, users can certainly do LLVM=1, LLVM_IAS=0 as well and we still
try to support that combination according to Nick. To clarify:
- > v5.10 kernel, LLVM=1 (LLVM_IAS=0 is not the default) is recommended,
but user can still have LLVM=1, LLVM_IAS=0 to trigger the issue
- <= 5.10 kernel, LLVM=1 (LLVM_IAS=0 is the default) is recommended in
which case GNU as will be used
Fixes: 1dc9285184 ("bpf: kernel side support for BTF Var and DataSec")
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Cc: Yonghong Song <yhs@meta.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/bpf/20230615145607.3469985-1-revest@chromium.org
Analyzing system call failures with the function_graph tracer can be a
time-consuming process, particularly when locating the kernel function
that first returns an error in the trace logs. This change aims to
simplify the process by recording the function return value to the
'retval' member of 'ftrace_graph_ret' and printing it when outputting
the trace log.
We have introduced new trace options: funcgraph-retval and
funcgraph-retval-hex. The former controls whether to display the return
value, while the latter controls the display format.
Please note that even if a function's return type is void, a return
value will still be printed. You can simply ignore it.
This patch only establishes the fundamental infrastructure. Subsequent
patches will make this feature available on some commonly used processor
architectures.
Here is an example:
I attempted to attach the demo process to a cpu cgroup, but it failed:
echo `pidof demo` > /sys/fs/cgroup/cpu/test/tasks
-bash: echo: write error: Invalid argument
The strace logs indicate that the write system call returned -EINVAL(-22):
...
write(1, "273\n", 4) = -1 EINVAL (Invalid argument)
...
To capture trace logs during a write system call, use the following
commands:
cd /sys/kernel/debug/tracing/
echo 0 > tracing_on
echo > trace
echo *sys_write > set_graph_function
echo *spin* > set_graph_notrace
echo *rcu* >> set_graph_notrace
echo *alloc* >> set_graph_notrace
echo preempt* >> set_graph_notrace
echo kfree* >> set_graph_notrace
echo $$ > set_ftrace_pid
echo function_graph > current_tracer
echo 1 > options/funcgraph-retval
echo 0 > options/funcgraph-retval-hex
echo 1 > tracing_on
echo `pidof demo` > /sys/fs/cgroup/cpu/test/tasks
echo 0 > tracing_on
cat trace > ~/trace.log
To locate the root cause, search for error code -22 directly in the file
trace.log and identify the first function that returned -22. Once you
have identified this function, examine its code to determine the root
cause.
For example, in the trace log below, cpu_cgroup_can_attach
returned -22 first, so we can focus our analysis on this function to
identify the root cause.
...
1) | cgroup_migrate() {
1) 0.651 us | cgroup_migrate_add_task(); /* = 0xffff93fcfd346c00 */
1) | cgroup_migrate_execute() {
1) | cpu_cgroup_can_attach() {
1) | cgroup_taskset_first() {
1) 0.732 us | cgroup_taskset_next(); /* = 0xffff93fc8fb20000 */
1) 1.232 us | } /* cgroup_taskset_first = 0xffff93fc8fb20000 */
1) 0.380 us | sched_rt_can_attach(); /* = 0x0 */
1) 2.335 us | } /* cpu_cgroup_can_attach = -22 */
1) 4.369 us | } /* cgroup_migrate_execute = -22 */
1) 7.143 us | } /* cgroup_migrate = -22 */
...
Link: https://lkml.kernel.org/r/1fc502712c981e0e6742185ba242992170ac9da8.1680954589.git.pengdonglin@sangfor.com.cn
Tested-by: Florian Kauer <florian.kauer@linutronix.de>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Donglin Peng <pengdonglin@sangfor.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In final testing of:
1fc502712c.1680954589.git.pengdonglin@sangfor.com.cn/
"function_graph: Support recording and printing the return value of function"
The test failed due to a new warning found in the build:
kernel/trace/fgraph.c:243:56: warning: ‘struct fgraph_ret_regs’ declared inside parameter list will not be visible outside of this definition or declaration
Instead of asking to send another patch series, just add it and then apply
the updates.
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- Fix MAINTAINERS file to point to proper mailing list for rtla and rv
The mailing list pointed to linux-trace-devel instead of
linux-trace-kernel. The former is for the tracing libraries
and the latter is for anything in the Linux kernel tree.
The wrong mailing list was used because linux-trace-kernel did not
exist when rtla and rv were created.
- User events:
. Fix matching of dynamic events to their user events
When user writes to dynamic_events file, a lookup of the
registered dynamic events are made, but there were some cases
that a match could be incorrectly made.
. Add auto cleanup of user events
Have the user events automatically get removed when the last
reference (file descriptor) is closed. This was asked for to
prevent leaks of user events hanging around needing admins
to clean them up.
. Add persistent logic (but not let user space use it yet)
In some cases, having a persistent user event (one that does not
get cleaned up automatically) is useful. But there's still
debates about how to expose this to user space. The infrastructure
is added, but the API is not.
. Update the selftests
Update the user event selftests to reflect the above changes.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZJGrABQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qgRDAQDvF8ktlcn+gqyUxt2OcTlbBh0jqS0b
FKXYdq6FTgfWYQD/ctunFbPdzn4D6Kc/lG8p4QxpMmtA19BUOPwEt3CkAwM=
=CDzr
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix MAINTAINERS file to point to proper mailing list for rtla and rv
The mailing list pointed to linux-trace-devel instead of
linux-trace-kernel. The former is for the tracing libraries and the
latter is for anything in the Linux kernel tree. The wrong mailing
list was used because linux-trace-kernel did not exist when rtla and
rv were created.
- User events:
- Fix matching of dynamic events to their user events
When user writes to dynamic_events file, a lookup of the
registered dynamic events is made, but there were some cases that
a match could be incorrectly made.
- Add auto cleanup of user events
Have the user events automatically get removed when the last
reference (file descriptor) is closed. This was asked for to
prevent leaks of user events hanging around needing admins to
clean them up.
- Add persistent logic (but not let user space use it yet)
In some cases, having a persistent user event (one that does not
get cleaned up automatically) is useful. But there's still debates
about how to expose this to user space. The infrastructure is
added, but the API is not.
- Update the selftests
Update the user event selftests to reflect the above changes"
* tag 'trace-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/user_events: Document auto-cleanup and remove dyn_event refs
selftests/user_events: Adapt dyn_test to non-persist events
selftests/user_events: Ensure auto cleanup works as expected
tracing/user_events: Add auto cleanup and future persist flag
tracing/user_events: Track refcount consistently via put/get
tracing/user_events: Store register flags on events
tracing/user_events: Remove user_ns walk for groups
selftests/user_events: Add perf self-test for empty arguments events
selftests/user_events: Clear the events after perf self-test
selftests/user_events: Add ftrace self-test for empty arguments events
tracing/user_events: Fix the incorrect trace record for empty arguments events
tracing: Modify print_fields() for fields output order
tracing/user_events: Handle matching arguments that is null from dyn_events
tracing/user_events: Prevent same name but different args event
tracing/rv/rtla: Update MAINTAINERS file to point to proper mailing list
The HAVE_ prefix means that the code could be enabled. Add another
variable for HAVE_HARDLOCKUP_DETECTOR_SPARC64 without this prefix.
It will be set when it should be built. It will make it compatible
with the other hardlockup detectors.
Before, it is far from obvious that the SPARC64 variant is actually used:
$> make ARCH=sparc64 defconfig
$> grep HARDLOCKUP_DETECTOR .config
CONFIG_HAVE_HARDLOCKUP_DETECTOR_BUDDY=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_SPARC64=y
After, it is more clear:
$> make ARCH=sparc64 defconfig
$> grep HARDLOCKUP_DETECTOR .config
CONFIG_HAVE_HARDLOCKUP_DETECTOR_BUDDY=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_SPARC64=y
CONFIG_HARDLOCKUP_DETECTOR_SPARC64=y
Link: https://lkml.kernel.org/r/20230616150618.6073-6-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There are several hardlockup detector implementations and several Kconfig
values which allow selection and build of the preferred one.
CONFIG_HARDLOCKUP_DETECTOR was introduced by the commit 23637d477c
("lockup_detector: Introduce CONFIG_HARDLOCKUP_DETECTOR") in v2.6.36.
It was a preparation step for introducing the new generic perf hardlockup
detector.
The existing arch-specific variants did not support the to-be-created
generic build configurations, sysctl interface, etc. This distinction
was made explicit by the commit 4a7863cc2e ("x86, nmi_watchdog:
Remove ARCH_HAS_NMI_WATCHDOG and rely on CONFIG_HARDLOCKUP_DETECTOR")
in v2.6.38.
CONFIG_HAVE_NMI_WATCHDOG was introduced by the commit d314d74c69
("nmi watchdog: do not use cpp symbol in Kconfig") in v3.4-rc1. It replaced
the above mentioned ARCH_HAS_NMI_WATCHDOG. At that time, it was still used
by three architectures, namely blackfin, mn10300, and sparc.
The support for blackfin and mn10300 architectures has been completely
dropped some time ago. And sparc is the only architecture with the historic
NMI watchdog at the moment.
And the old sparc implementation is really special. It is always built on
sparc64. It used to be always enabled until the commit 7a5c8b57ce
("sparc: implement watchdog_nmi_enable and watchdog_nmi_disable") added
in v4.10-rc1.
There are only few locations where the sparc64 NMI watchdog interacts
with the generic hardlockup detectors code:
+ implements arch_touch_nmi_watchdog() which is called from the generic
touch_nmi_watchdog()
+ implements watchdog_hardlockup_enable()/disable() to support
/proc/sys/kernel/nmi_watchdog
+ is always preferred over other generic watchdogs, see
CONFIG_HARDLOCKUP_DETECTOR
+ includes asm/nmi.h into linux/nmi.h because some sparc-specific
functions are needed in sparc-specific code which includes
only linux/nmi.h.
The situation became more complicated after the commit 05a4a95279
("kernel/watchdog: split up config options") and commit 2104180a53
("powerpc/64s: implement arch-specific hardlockup watchdog") in v4.13-rc1.
They introduced HAVE_HARDLOCKUP_DETECTOR_ARCH. It was used for powerpc
specific hardlockup detector. It was compatible with the perf one
regarding the general boot, sysctl, and programming interfaces.
HAVE_HARDLOCKUP_DETECTOR_ARCH was defined as a superset of
HAVE_NMI_WATCHDOG. It made some sense because all arch-specific
detectors had some common requirements, namely:
+ implemented arch_touch_nmi_watchdog()
+ included asm/nmi.h into linux/nmi.h
+ defined the default value for /proc/sys/kernel/nmi_watchdog
But it actually has made things pretty complicated when the generic
buddy hardlockup detector was added. Before the generic perf detector
was newer supported together with an arch-specific one. But the buddy
detector could work on any SMP system. It means that an architecture
could support both the arch-specific and buddy detector.
As a result, there are few tricky dependencies. For example,
CONFIG_HARDLOCKUP_DETECTOR depends on:
((HAVE_HARDLOCKUP_DETECTOR_PERF || HAVE_HARDLOCKUP_DETECTOR_BUDDY) && !HAVE_NMI_WATCHDOG) || HAVE_HARDLOCKUP_DETECTOR_ARCH
The problem is that the very special sparc implementation is defined as:
HAVE_NMI_WATCHDOG && !HAVE_HARDLOCKUP_DETECTOR_ARCH
Another problem is that the meaning of HAVE_NMI_WATCHDOG is far from clear
without reading understanding the history.
Make the logic less tricky and more self-explanatory by making
HAVE_NMI_WATCHDOG specific for the sparc64 implementation. And rename it to
HAVE_HARDLOCKUP_DETECTOR_SPARC64.
Note that HARDLOCKUP_DETECTOR_PREFER_BUDDY, HARDLOCKUP_DETECTOR_PERF,
and HARDLOCKUP_DETECTOR_BUDDY may conflict only with
HAVE_HARDLOCKUP_DETECTOR_ARCH. They depend on HARDLOCKUP_DETECTOR
and it is not longer enabled when HAVE_NMI_WATCHDOG is set.
Link: https://lkml.kernel.org/r/20230616150618.6073-5-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It's been suggested that since the SMP barriers are only potentially
useful for the buddy hardlockup detector, not the perf hardlockup
detector, that the barriers belong in the buddy code. Let's move them and
add clearer comments about why they're needed.
Link: https://lkml.kernel.org/r/20230526184139.9.I5ab0a0eeb0bd52fb23f901d298c72fa5c396e22b@changeid
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Suggested-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There's no reason to make a copy of the "watchdog_cpus" locally in
watchdog_next_cpu(). Making a copy wouldn't make things any more race
free and we're just reading the value so there's no need for a copy.
Link: https://lkml.kernel.org/r/20230526184139.7.If466f9a2b50884cbf6a1d8ad05525a2c17069407@changeid
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Suggested-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In the patch ("watchdog/hardlockup: detect hard lockups using secondary
(buddy) CPUs"), we added a call from the common watchdog.c file into the
buddy. That call could be done more cleanly. Specifically:
1. If we move the call into watchdog_hardlockup_kick() then it keeps
watchdog_timer_fn() simpler.
2. We don't need to pass an "unsigned long" to the buddy for the timer
count. In the patch ("watchdog/hardlockup: add a "cpu" param to
watchdog_hardlockup_check()") the count was changed to "atomic_t"
which is backed by an int, so we should match types.
Link: https://lkml.kernel.org/r/20230526184139.6.I006c7d958a1ea5c4e1e4dc44a25596d9bb5fd3ba@changeid
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Suggested-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In the patch ("watchdog/hardlockup: add a "cpu" param to
watchdog_hardlockup_check()") we started using a cpumask to keep track of
which CPUs to backtrace. When setting up this cpumask, it's better to use
cpumask_copy() than to just copy the structure directly. Fix this.
Link: https://lkml.kernel.org/r/20230526184139.4.Iccee2d1ea19114dafb6553a854ea4d8ab2a3f25b@changeid
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Suggested-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In the patch ("watchdog/hardlockup: add a "cpu" param to
watchdog_hardlockup_check()") there was no reason to use raw_cpu_ptr().
Using this_cpu_ptr() works fine.
Link: https://lkml.kernel.org/r/20230526184139.3.I660e103077dcc23bb29aaf2be09cb234e0495b2d@changeid
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Suggested-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Right now there is one arch (sparc64) that selects HAVE_NMI_WATCHDOG
without selecting HAVE_HARDLOCKUP_DETECTOR_ARCH. Because of that one
architecture, we have some special case code in the watchdog core to
handle the fact that watchdog_hardlockup_probe() isn't implemented.
Let's implement watchdog_hardlockup_probe() for sparc64 and get rid of the
special case.
As a side effect of doing this, code inspection tells us that we could fix
a minor bug where the system won't properly realize that NMI watchdogs are
disabled. Specifically, on powerpc if CONFIG_PPC_WATCHDOG is turned off
the arch might still select CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH which
selects CONFIG_HAVE_NMI_WATCHDOG. Since CONFIG_PPC_WATCHDOG was off then
nothing will override the "weak" watchdog_hardlockup_probe() and we'll
fallback to looking at CONFIG_HAVE_NMI_WATCHDOG.
Link: https://lkml.kernel.org/r/20230526184139.2.Ic6ebbf307ca0efe91f08ce2c1eb4a037ba6b0700@changeid
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Suggested-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "watchdog: Cleanup / fixes after buddy series v5 reviews".
This patch series attempts to finish resolving the feedback received
from Petr Mladek on the v5 series I posted.
Probably the only thing that wasn't fully as clean as Petr requested was
the Kconfig stuff. I couldn't find a better way to express it without a
more major overhaul. In the very least, I renamed "NON_ARCH" to
"PERF_OR_BUDDY" in the hopes that will make it marginally better.
Nothing in this series is terribly critical and even the bugfixes are
small. However, it does cleanup a few things that were pointed out in
review.
This patch (of 10):
The permissions for the kernel.nmi_watchdog sysctl have always been set at
compile time despite the fact that a watchdog can fail to probe. Let's
fix this and set the permissions based on whether the hardlockup detector
actually probed.
Link: https://lkml.kernel.org/r/20230527014153.2793931-1-dianders@chromium.org
Link: https://lkml.kernel.org/r/20230526184139.1.I0d75971cc52a7283f495aac0bd5c3041aadc734e@changeid
Fixes: a994a3147e ("watchdog/hardlockup/perf: Implement init time detection of perf")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reported-by: Petr Mladek <pmladek@suse.com>
Closes: https://lore.kernel.org/r/ZHCn4hNxFpY5-9Ki@alley
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This inline function is unused, remove it.
Link: https://lkml.kernel.org/r/20230610102858.31488-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: Jeff Xu <jeffxu@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert all instances of direct pte_t* dereferencing to instead use
ptep_get() helper. This means that by default, the accesses change from a
C dereference to a READ_ONCE(). This is technically the correct thing to
do since where pgtables are modified by HW (for access/dirty) they are
volatile and therefore we should always ensure READ_ONCE() semantics.
But more importantly, by always using the helper, it can be overridden by
the architecture to fully encapsulate the contents of the pte. Arch code
is deliberately not converted, as the arch code knows best. It is
intended that arch code (arm64) will override the default with its own
implementation that can (e.g.) hide certain bits from the core code, or
determine young/dirty status by mixing in state from another source.
Conversion was done using Coccinelle:
----
// $ make coccicheck \
// COCCI=ptepget.cocci \
// SPFLAGS="--include-headers" \
// MODE=patch
virtual patch
@ depends on patch @
pte_t *v;
@@
- *v
+ ptep_get(v)
----
Then reviewed and hand-edited to avoid multiple unnecessary calls to
ptep_get(), instead opting to store the result of a single call in a
variable, where it is correct to do so. This aims to negate any cost of
READ_ONCE() and will benefit arch-overrides that may be more complex.
Included is a fix for an issue in an earlier version of this patch that
was pointed out by kernel test robot. The issue arose because config
MMU=n elides definition of the ptep helper functions, including
ptep_get(). HUGETLB_PAGE=n configs still define a simple
huge_ptep_clear_flush() for linking purposes, which dereferences the ptep.
So when both configs are disabled, this caused a build error because
ptep_get() is not defined. Fix by continuing to do a direct dereference
when MMU=n. This is safe because for this config the arch code cannot be
trying to virtualize the ptes because none of the ptep helpers are
defined.
Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For direct DMA, if the size is small enough to have originated from a
kmalloc() cache below ARCH_DMA_MINALIGN, check its alignment against
dma_get_cache_alignment() and bounce if necessary. For larger sizes, it
is the responsibility of the DMA API caller to ensure proper alignment.
At this point, the kmalloc() caches are properly aligned but this will
change in a subsequent patch.
Architectures can opt in by selecting DMA_BOUNCE_UNALIGNED_KMALLOC.
Link: https://lkml.kernel.org/r/20230612153201.554742-15-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
sg_is_dma_bus_address() is inconsistent with the naming pattern of its
corresponding setters and its own kerneldoc, so take the majority vote and
rename it sg_dma_is_bus_address() (and fix up the missing underscores in
the kerneldoc too). This gives us a nice clear pattern where SG DMA flags
are SG_DMA_<NAME>, and the helpers for acting on them are
sg_dma_<action>_<name>().
Link: https://lkml.kernel.org/r/20230612153201.554742-14-catalin.marinas@arm.com
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Link: https://lore.kernel.org/r/fa2eca2862c7ffc41b50337abffb2dfd2864d3ea.1685036694.git.robin.murphy@arm.com
Tested-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The DMA flags field will be useful for users beyond PCI P2P, so upgrade to
its own dedicated config option.
[catalin.marinas@arm.com: use #ifdef CONFIG_NEED_SG_DMA_FLAGS in scatterlist.h]
[catalin.marinas@arm.com: update PCI_P2PDMA dma_flags comment in scatterlist.h]
Link: https://lkml.kernel.org/r/20230612153201.554742-13-catalin.marinas@arm.com
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In rare transient cases, not yet made possible, pte_offset_map() and
pte_offet_map_lock() may not find a page table: handle appropriately.
[hughd@google.com: __wp_page_copy_user(): don't call update_mmu_tlb() with NULL]
Link: https://lkml.kernel.org/r/1a4db221-7872-3594-57ce-42369945ec8d@google.com
Link: https://lkml.kernel.org/r/a194441b-63f3-adb6-5964-7ca3171ae7c2@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zack Rusin <zackr@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Move out flags validation and license checks out of the permission
checks. They were intermingled, which makes subsequent changes harder.
Clean this up: perform straightforward flag validation upfront, and
fetch and check license later, right where we use it. Also consolidate
capabilities check in one block, right after basic attribute sanity
checks.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230613223533.3689589-5-andrii@kernel.org
This allows to do more centralized decisions later on, and generally
makes it very explicit which maps are privileged and which are not
(e.g., LRU_HASH and LRU_PERCPU_HASH, which are privileged HASH variants,
as opposed to unprivileged HASH and HASH_PERCPU; now this is explicit
and easy to verify).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230613223533.3689589-4-andrii@kernel.org
Currently find_and_alloc_map() performs two separate functions: some
argument sanity checking and partial map creation workflow hanling.
Neither of those functions are self-sufficient and are augmented by
further checks and initialization logic in the caller (map_create()
function). So unify all the sanity checks, permission checks, and
creation and initialization logic in one linear piece of code in
map_create() instead. This also make it easier to further enhance
permission checks and keep them located in one place.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230613223533.3689589-3-andrii@kernel.org
Make each bpf() syscall command a bit more self-contained, making it
easier to further enhance it. We move sysctl_unprivileged_bpf_disabled
handling down to map_create() and bpf_prog_load(), two special commands
in this regard.
Also swap the order of checks, calling bpf_capable() only if
sysctl_unprivileged_bpf_disabled is true, avoiding unnecessary audit
messages.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230613223533.3689589-2-andrii@kernel.org
The ratelimit logic in report_idle_softirq() is broken because the
exit condition is always true:
static int ratelimit;
if (ratelimit < 10)
return false; ---> always returns here
ratelimit++; ---> no chance to run
Make it check for >= 10 instead.
Fixes: 0345691b24 ("tick/rcu: Stop allowing RCU_SOFTIRQ in idle")
Signed-off-by: Wen Yang <wenyang.linux@foxmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/tencent_5AAA3EEAB42095C9B7740BE62FBF9A67E007@qq.com
Commit c78f261e5dcb ("posix-timers: Clarify posix_timer_fn() comments")
turns an ifdef CONFIG_HIGH_RES_TIMERS into an conditional on
"IS_ENABLED(CONFIG_HIGHRES_TIMERS)"; note that the new conditional refers
to "HIGHRES_TIMERS" not "HIGH_RES_TIMERS" as before.
Fix this typo introduced in that refactoring.
Fixes: c78f261e5dcb ("posix-timers: Clarify posix_timer_fn() comments")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230609094643.26253-1-lukas.bulwahn@gmail.com
Make the issues vs. SIG_IGN understandable and remove the 15 years old
promise that a proper solution is already on the horizon.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/874jnrdmrq.ffs@tglx
The comment about timer lifetime at the end of the function is misplaced
and uncomprehensible.
Make it understandable and put it at the right place. Add a new comment
about the visibility of the new timer ID to user space.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230425183313.619897296@linutronix.de
The descriptions for common_nsleep() is wrong and common_nsleep_timens()
lacks any form of comment.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230425183313.567072835@linutronix.de
The documentation of sys_clock_settime() permissions is at a random place
and mostly word salad.
Remove it and add a concise comment into sys_clock_settime().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230425183313.514700292@linutronix.de
The decades old comment about Posix clock resolution is confusing at best.
Remove it and add a proper explanation to sys_clock_getres().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230425183313.356427330@linutronix.de
release_posix_timers() is called for cleaning up both hashed and unhashed
timers. The cases are differentiated by an argument and the usage is
hideous.
Seperate the actual free path out and use it for unhashed timers. Provide a
function for hashed timers.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230425183313.301432503@linutronix.de
All usage of hash_lock is in thread context. No point in using
spin_lock_irqsave()/irqrestore() for a single usage site.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230425183313.249063953@linutronix.de
Technically it's not required to set k_itimer::it_signal to NULL on exit()
because there is no other thread anymore which could lookup the timer
concurrently.
Set it to NULL for consistency sake and add a comment to that effect.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230425183313.196462644@linutronix.de
k_itimer::it_signal is read lockless in the RCU protected hash lookup, but
it can be written concurrently in the timer_create() and timer_delete()
path. Annotate these places with READ_ONCE() and WRITE_ONCE()
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230425183313.143596887@linutronix.de
Explain it better and add the CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y aspect
for completeness.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230425183312.985681995@linutronix.de
posix_timer_add() tries to allocate a posix timer ID by starting from the
cached ID which was stored by the last successful allocation.
This is done in a loop searching the ID space for a free slot one by
one. The loop has to terminate when the search wrapped around to the
starting point.
But that's racy vs. establishing the starting point. That is read out
lockless, which leads to the following problem:
CPU0 CPU1
posix_timer_add()
start = sig->posix_timer_id;
lock(hash_lock);
... posix_timer_add()
if (++sig->posix_timer_id < 0)
start = sig->posix_timer_id;
sig->posix_timer_id = 0;
So CPU1 can observe a negative start value, i.e. -1, and the loop break
never happens because the condition can never be true:
if (sig->posix_timer_id == start)
break;
While this is unlikely to ever turn into an endless loop as the ID space is
huge (INT_MAX), the racy read of the start value caught the attention of
KCSAN and Dmitry unearthed that incorrectness.
Rewrite it so that all id operations are under the hash lock.
Reported-by: syzbot+5c54bd3eb218bb595aa9@syzkaller.appspotmail.com
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/87bkhzdn6g.ffs@tglx
itimer_delete() has a retry loop when the timer is concurrently expired. On
non-RT kernels this just spin-waits until the timer callback has completed,
except for posix CPU timers which have HAVE_POSIX_CPU_TIMERS_TASK_WORK
enabled.
In that case and on RT kernels the existing task could live lock when
preempting the task which does the timer delivery.
Replace spin_unlock() with an invocation of timer_wait_running() to handle
it the same way as the other retry loops in the posix timer code.
Fixes: ec8f954a40 ("posix-timers: Use a callback for cancel synchronization on PREEMPT_RT")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/87v8g7c50d.ffs@tglx
irq_domain_debugfs_init() is defined in irqdomain.c, but the
declaration is in a header that is not included here:
kernel/irq/irqdomain.c:1965:13: error: no previous prototype for 'irq_domain_debugfs_init' [-Werror=missing-prototypes]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230516200432.554240-1-arnd@kernel.org
After commit 8ad075c2eb ("sched: Async unthrottling for cfs
bandwidth"), we may update the rq clock multiple times in the loop of
__cfsb_csd_unthrottle().
A prior (although less common) instance of this problem exists in
unthrottle_offline_cfs_rqs().
Cure both by ensuring update_rq_clock() is called before the loop and
setting RQCF_ACT_SKIP during the loop, to supress further updates.
The alternative would be pulling update_rq_clock() out of
unthrottle_cfs_rq(), but that gives an even bigger mess.
Fixes: 8ad075c2eb ("sched: Async unthrottling for cfs bandwidth")
Reviewed-By: Ben Segall <bsegall@google.com>
Suggested-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Hao Jia <jiahao.os@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20230613082012.49615-4-jiahao.os@bytedance.com
There is a double update_rq_clock() invocation:
__balance_push_cpu_stop()
update_rq_clock()
__migrate_task()
update_rq_clock()
Sadly select_fallback_rq() also needs update_rq_clock() for
__do_set_cpus_allowed(), it is not possible to remove the update from
__balance_push_cpu_stop(). So remove it from __migrate_task() and
ensure all callers of this function call update_rq_clock() prior to
calling it.
Signed-off-by: Hao Jia <jiahao.os@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20230613082012.49615-3-jiahao.os@bytedance.com
When using a cpufreq governor that uses
cpufreq_add_update_util_hook(), it is possible to trigger a missing
update_rq_clock() warning for the CPU hotplug path:
rq_attach_root()
set_rq_offline()
rq_offline_rt()
__disable_runtime()
sched_rt_rq_enqueue()
enqueue_top_rt_rq()
cpufreq_update_util()
data->func(data, rq_clock(rq), flags)
Move update_rq_clock() from sched_cpu_deactivate() (one of it's
callers) into set_rq_offline() such that it covers all
set_rq_offline() usage.
Additionally change rq_attach_root() to use rq_lock_irqsave() so that
it will properly manage the runqueue clock flags.
Suggested-by: Ben Segall <bsegall@google.com>
Signed-off-by: Hao Jia <jiahao.os@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20230613082012.49615-2-jiahao.os@bytedance.com
According to the GRUB[1] rule, the runtime is depreciated as:
"dq = -max{u, (1 - Uinact - Uextra)} dt" (1)
To guarantee that deadline tasks doesn't starve lower class tasks,
we do not allocate the full bandwidth of the cpu to deadline tasks.
Maximum bandwidth usable by deadline tasks is denoted by "Umax".
Considering Umax, equation (1) becomes:
"dq = -(max{u, (Umax - Uinact - Uextra)} / Umax) dt" (2)
Current implementation has a minor bug in equation (2), which this
patch fixes.
The reclamation logic is verified by a sample program which creates
multiple deadline threads and observing their utilization. The tests
were run on an isolated cpu(isolcpus=3) on a 4 cpu system.
Tests on 6.3.0
==============
RUN 1: runtime=7ms, deadline=period=10ms, RT capacity = 95%
TID[693]: RECLAIM=1, (r=7ms, d=10ms, p=10ms), Util: 93.33
TID[693]: RECLAIM=1, (r=7ms, d=10ms, p=10ms), Util: 93.35
RUN 2: runtime=1ms, deadline=period=100ms, RT capacity = 95%
TID[708]: RECLAIM=1, (r=1ms, d=100ms, p=100ms), Util: 16.69
TID[708]: RECLAIM=1, (r=1ms, d=100ms, p=100ms), Util: 16.69
RUN 3: 2 tasks
Task 1: runtime=1ms, deadline=period=10ms
Task 2: runtime=1ms, deadline=period=100ms
TID[631]: RECLAIM=1, (r=1ms, d=10ms, p=10ms), Util: 62.67
TID[632]: RECLAIM=1, (r=1ms, d=100ms, p=100ms), Util: 6.37
TID[631]: RECLAIM=1, (r=1ms, d=10ms, p=10ms), Util: 62.38
TID[632]: RECLAIM=1, (r=1ms, d=100ms, p=100ms), Util: 6.23
As seen above, the reclamation doesn't reclaim the maximum allowed
bandwidth and as the bandwidth of tasks gets smaller, the reclaimed
bandwidth also comes down.
Tests with this patch applied
=============================
RUN 1: runtime=7ms, deadline=period=10ms, RT capacity = 95%
TID[608]: RECLAIM=1, (r=7ms, d=10ms, p=10ms), Util: 95.19
TID[608]: RECLAIM=1, (r=7ms, d=10ms, p=10ms), Util: 95.16
RUN 2: runtime=1ms, deadline=period=100ms, RT capacity = 95%
TID[616]: RECLAIM=1, (r=1ms, d=100ms, p=100ms), Util: 95.27
TID[616]: RECLAIM=1, (r=1ms, d=100ms, p=100ms), Util: 95.21
RUN 3: 2 tasks
Task 1: runtime=1ms, deadline=period=10ms
Task 2: runtime=1ms, deadline=period=100ms
TID[620]: RECLAIM=1, (r=1ms, d=10ms, p=10ms), Util: 86.64
TID[621]: RECLAIM=1, (r=1ms, d=100ms, p=100ms), Util: 8.66
TID[620]: RECLAIM=1, (r=1ms, d=10ms, p=10ms), Util: 86.45
TID[621]: RECLAIM=1, (r=1ms, d=100ms, p=100ms), Util: 8.73
Running tasks on all cpus allowing for migration also showed that
the utilization is reclaimed to the maximum. Running 10 tasks on
3 cpus SCHED_FLAG_RECLAIM - top shows:
%Cpu0 : 94.6 us, 0.0 sy, 0.0 ni, 5.4 id, 0.0 wa
%Cpu1 : 95.2 us, 0.0 sy, 0.0 ni, 4.8 id, 0.0 wa
%Cpu2 : 95.8 us, 0.0 sy, 0.0 ni, 4.2 id, 0.0 wa
[1]: Abeni, Luca & Lipari, Giuseppe & Parri, Andrea & Sun, Youcheng.
(2015). Parallel and sequential reclaiming in multicore
real-time global scheduling.
Signed-off-by: Vineeth Pillai (Google) <vineeth@bitbyteword.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/20230530135526.2385378-1-vineeth@bitbyteword.org
Add a tracepoint for when a CSD is queued to a remote CPU's
call_single_queue. This allows finding exactly which CPU queued a given CSD
when looking at a csd_function_{entry,exit} event, and also enables us to
accurately measure IPI delivery time with e.g. a synthetic event:
$ echo 'hist:keys=cpu,csd.hex:ts=common_timestamp.usecs' >\
/sys/kernel/tracing/events/smp/csd_queue_cpu/trigger
$ echo 'csd_latency unsigned int dst_cpu; unsigned long csd; u64 time' >\
/sys/kernel/tracing/synthetic_events
$ echo \
'hist:keys=common_cpu,csd.hex:'\
'time=common_timestamp.usecs-$ts:'\
'onmatch(smp.csd_queue_cpu).trace(csd_latency,common_cpu,csd,$time)' >\
/sys/kernel/tracing/events/smp/csd_function_entry/trigger
$ trace-cmd record -e 'synthetic:csd_latency' hackbench
$ trace-cmd report
<...>-467 [001] 21.824263: csd_queue_cpu: cpu=0 callsite=try_to_wake_up+0x2ea func=sched_ttwu_pending csd=0xffff8880076148b8
<...>-467 [001] 21.824280: ipi_send_cpu: cpu=0 callsite=try_to_wake_up+0x2ea callback=generic_smp_call_function_single_interrupt+0x0
<...>-489 [000] 21.824299: csd_function_entry: func=sched_ttwu_pending csd=0xffff8880076148b8
<...>-489 [000] 21.824320: csd_latency: dst_cpu=0, csd=18446612682193848504, time=36
Suggested-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Tested-and-reviewed-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230615065944.188876-7-leobras@redhat.com
The recently added ipi_send_{cpu,cpumask} tracepoints allow finding sources
of IPIs targeting CPUs running latency-sensitive applications.
For NOHZ_FULL CPUs, all IPIs are interference, and those tracepoints are
sufficient to find them and work on getting rid of them. In some setups
however, not *all* IPIs are to be suppressed, but long-running IPI
callbacks can still be problematic.
Add a pair of tracepoints to mark the start and end of processing a CSD IPI
callback, similar to what exists for softirq, workqueue or timer callbacks.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Tested-and-reviewed-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230615065944.188876-5-leobras@redhat.com
The tick period is aligned very early while the first clock_event_device is
registered. At that point the system runs in periodic mode and switches
later to one-shot mode if possible.
The next wake-up event is programmed based on the aligned value
(tick_next_period) but the delta value, that is used to program the
clock_event_device, is computed based on ktime_get().
With the subtracted offset, the device fires earlier than the exact time
frame. With a large enough offset the system programs the timer for the
next wake-up and the remaining time left is too small to make any boot
progress. The system hangs.
Move the alignment later to the setup of tick_sched timer. At this point
the system switches to oneshot mode and a high resolution clocksource is
available. At this point it is safe to align tick_next_period because
ktime_get() will now return accurate (not jiffies based) time.
[bigeasy: Patch description + testing].
Fixes: e9523a0d81 ("tick/common: Align tick period with the HZ tick.")
Reported-by: Mathias Krause <minipli@grsecurity.net>
Reported-by: "Bhatnagar, Rishabh" <risbhat@amazon.com>
Suggested-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Tested-by: Mathias Krause <minipli@grsecurity.net>
Acked-by: SeongJae Park <sj@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/5a56290d-806e-b9a5-f37c-f21958b5a8c0@grsecurity.net
Link: https://lore.kernel.org/12c6f9a3-d087-b824-0d05-0d18c9bc1bf3@amazon.com
Link: https://lore.kernel.org/r/20230615091830.RxMV2xf_@linutronix.de
bpf_free_inode() is invoked as a RCU callback. Usually RCU callbacks are
invoked within softirq context. By setting rcutree.use_softirq=0 boot
option the RCU callbacks will be invoked in a per-CPU kthread with
bottom halves disabled which implies a RCU read section.
On PREEMPT_RT the context remains fully preemptible. The RCU read
section however does not allow schedule() invocation. The latter happens
in mutex_lock() performed by bpf_trampoline_unlink_prog() originated
from bpf_link_put().
It was pointed out that the bpf_link_put() invocation should not be
delayed if originated from close(). It was also pointed out that other
invocations from within a syscall should also avoid the workqueue.
Everyone else should use workqueue by default to remain safe in the
future (while auditing the code, every caller was preemptible except for
the RCU case).
Let bpf_link_put() use the worker unconditionally. Add
bpf_link_put_direct() which will directly free the resources and is used
by close() and from within __sys_bpf().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230614083430.oENawF8f@linutronix.de
kthread_park and wait_woken have a similar race that
kthread_stop and wait_woken used to have before it was fixed in
commit cb6538e740 ("sched/wait: Fix a kthread race with
wait_woken()"). Extend that fix to also cover kthread_park.
[jstultz: Made changes suggested by Peter to optimize
memory loads]
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lore.kernel.org/r/20230602212350.535358-1-jstultz@google.com
All callers of set_sched_topology() are within __init section. Mark
it __init too.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lore.kernel.org/r/20230603073645.1173332-1-linmiaohe@huawei.com
cppcheck reports
kernel/sched/fair.c:7436:17: style: Local variable 'cpu_util' shadows outer function [shadowFunction]
unsigned long cpu_util;
^
Clean this up by renaming the variable to eff_util
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20230611122535.183654-1-trix@redhat.com
There is a class of interrupt controllers out there that, once they
have signalled a given interrupt number, will still signal incoming
instances of the *same* interrupt despite the original interrupt
not having been EOIed yet.
As long as the new interrupt reaches the *same* CPU, nothing bad
happens, as that CPU still has its interrupts globally disabled,
and we will only take the new interrupt once the interrupt has
been EOIed.
However, things become more "interesting" if an affinity change comes
in while the interrupt is being handled. More specifically, while
the per-irq lock is being dropped. This results in the affinity change
taking place immediately. At this point, there is nothing that prevents
the interrupt from firing on the new target CPU. We end-up with the
interrupt running concurrently on two CPUs, which isn't a good thing.
And that's where things become worse: the new CPU notices that the
interrupt handling is in progress (irq_may_run() return false), and
*drops the interrupt on the floor*.
The whole race looks like this:
CPU 0 | CPU 1
-----------------------------|-----------------------------
interrupt start |
handle_fasteoi_irq | set_affinity(CPU 1)
handler |
... | interrupt start
... | handle_fasteoi_irq -> early out
handle_fasteoi_irq return | interrupt end
interrupt end |
If the interrupt was an edge, too bad. The interrupt is lost, and
the system will eventually die one way or another. Not great.
A way to avoid this situation is to detect this problem at the point
we handle the interrupt on the new target. Instead of dropping the
interrupt, use the resend mechanism to force it to be replayed.
Also, in order to limit the impact of this workaround to the pathetic
architectures that require it, gate it behind a new irq flag aptly
named IRQD_RESEND_WHEN_IN_PROGRESS.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: James Gowans <jgowans@amazon.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: KarimAllah Raslan <karahmed@amazon.com>
Cc: Yipeng Zou <zouyipeng@huawei.com>
Cc: Zhang Jianhua <chris.zjh@huawei.com>
[maz: reworded commit mesage]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230608120021.3273400-3-jgowans@amazon.com
Adding a bit more info about what the flags are used for may help future
code readers.
Signed-off-by: James Gowans <jgowans@amazon.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Liao Chang <liaochang1@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230608120021.3273400-2-jgowans@amazon.com
Currently user events need to be manually deleted via the delete IOCTL
call or via the dynamic_events file. Most operators and processes wish
to have these events auto cleanup when they are no longer used by
anything to prevent them piling without manual maintenance. However,
some operators may not want this, such as pre-registering events via the
dynamic_events tracefs file.
Update user_event_put() to attempt an auto delete of the event if it's
the last reference. The auto delete must run in a work queue to ensure
proper behavior of class->reg() invocations that don't expect the call
to go away from underneath them during the unregister. Add work_struct
to user_event struct to ensure we can do this reliably.
Add a persist flag, that is not yet exposed, to ensure we can toggle
between auto-cleanup and leaving the events existing in the future. When
a non-zero flag is seen during register, return -EINVAL to ensure ABI
is clear for the user processes while we work out the best approach for
persistent events.
Link: https://lkml.kernel.org/r/20230614163336.5797-4-beaub@linux.microsoft.com
Link: https://lore.kernel.org/linux-trace-kernel/20230518093600.3f119d68@rorschach.local.home/
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Various parts of the code today track user_event's refcnt field directly
via a refcount_add/dec. This makes it hard to modify the behavior of the
last reference decrement in all code paths consistently. For example, in
the future we will auto-delete events upon the last reference going
away. This last reference could happen in many places, but we want it to
be consistently handled.
Add user_event_get() and user_event_put() for the add/dec. Update all
places where direct refcounts are being used to utilize these new
functions. In each location pass if event_mutex is locked or not. This
allows us to drop events automatically in future patches clearly. Ensure
when caller states the lock is held, it really is (or is not) held.
Link: https://lkml.kernel.org/r/20230614163336.5797-3-beaub@linux.microsoft.com
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently we don't have any available flags for user processes to use to
indicate options for user_events. We will soon have a flag to indicate
the event should or should not auto-delete once it's not being used by
anyone.
Add a reg_flags field to user_events and parameters to existing
functions to allow for this in future patches.
Link: https://lkml.kernel.org/r/20230614163336.5797-2-beaub@linux.microsoft.com
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
During discussions it was suggested that user_ns is not a good place to
try to attach a tracing namespace. The current code has stubs to enable
that work that are very likely to change and incur a performance cost.
Remove the user_ns walk when creating a group and determining the system
name to use, since it's unlikely user_ns will be used in the future.
Link: https://lore.kernel.org/all/20230601-urenkel-holzofen-cd9403b9cadd@brauner/
Link: https://lore.kernel.org/linux-trace-kernel/20230601224928.301-1-beaub@linux.microsoft.com
Suggested-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The user_events support events that has empty arguments. But the trace event
is discarded and not really committed when the arguments is empty. Fix this
by not attempting to copy in zero-length data.
Link: https://lkml.kernel.org/r/20230606062027.1008398-2-sunliming@kylinos.cn
Acked-by: Beau Belgrave <beaub@linux.microsoft.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: sunliming <sunliming@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When A registering user event from dyn_events has no argments, it will pass the
matching check, regardless of whether there is a user event with the same name
and arguments. Add the matching check when the arguments of registering user
event is null.
Link: https://lore.kernel.org/linux-trace-kernel/20230529065110.303440-1-sunliming@kylinos.cn
Signed-off-by: sunliming <sunliming@kylinos.cn>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
User processes register name_args for events. If the same name but different
args event are registered. The trace outputs of second event are printed
as the first event. This is incorrect.
Return EADDRINUSE back to the user process if the same name but different args
event has being registered.
Link: https://lore.kernel.org/linux-trace-kernel/20230529032100.286534-1-sunliming@kylinos.cn
Signed-off-by: sunliming <sunliming@kylinos.cn>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Make sure that the following unsafe example is rejected by verifier:
1: r9 = ... some pointer with range X ...
2: r6 = ... unbound scalar ID=a ...
3: r7 = ... unbound scalar ID=b ...
4: if (r6 > r7) goto +1
5: r6 = r7
6: if (r6 > X) goto ...
--- checkpoint ---
7: r9 += r7
8: *(u64 *)r9 = Y
This example is unsafe because not all execution paths verify r7 range.
Because of the jump at (4) the verifier would arrive at (6) in two states:
I. r6{.id=b}, r7{.id=b} via path 1-6;
II. r6{.id=a}, r7{.id=b} via path 1-4, 6.
Currently regsafe() does not call check_ids() for scalar registers,
thus from POV of regsafe() states (I) and (II) are identical. If the
path 1-6 is taken by verifier first, and checkpoint is created at (6)
the path [1-4, 6] would be considered safe.
Changes in this commit:
- check_ids() is modified to disallow mapping multiple old_id to the
same cur_id.
- check_scalar_ids() is added, unlike check_ids() it treats ID zero as
a unique scalar ID.
- check_scalar_ids() needs to generate temporary unique IDs, field
'tmp_id_gen' is added to bpf_verifier_env::idmap_scratch to
facilitate this.
- regsafe() is updated to:
- use check_scalar_ids() for precise scalar registers.
- compare scalar registers using memcmp only for explore_alu_limits
branch. This simplifies control flow for scalar case, and has no
measurable performance impact.
- check_alu_op() is updated to avoid generating bpf_reg_state::id for
constant scalar values when processing BPF_MOV. ID is needed to
propagate range information for identical values, but there is
nothing to propagate for constants.
Fixes: 75748837b7 ("bpf: Propagate scalar ranges through register assignments.")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230613153824.3324830-4-eddyz87@gmail.com
Change mark_chain_precision() to track precision in situations
like below:
r2 = unknown value
...
--- state #0 ---
...
r1 = r2 // r1 and r2 now share the same ID
...
--- state #1 {r1.id = A, r2.id = A} ---
...
if (r2 > 10) goto exit; // find_equal_scalars() assigns range to r1
...
--- state #2 {r1.id = A, r2.id = A} ---
r3 = r10
r3 += r1 // need to mark both r1 and r2
At the beginning of the processing of each state, ensure that if a
register with a scalar ID is marked as precise, all registers sharing
this ID are also marked as precise.
This property would be used by a follow-up change in regsafe().
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230613153824.3324830-2-eddyz87@gmail.com
When subprograms are in use, the main program is not jit'd after the
subprograms because jit_subprogs sets a value for prog->bpf_func upon
success. Subsequent calls to the JIT are bypassed when this value is
non-NULL. This leads to a situation where the main program and its
func[0] counterpart are both in the bpf kallsyms tree, but only func[0]
has an extable. Extables are only created during JIT. Now there are
two nearly identical program ksym entries in the tree, but only one has
an extable. Depending upon how the entries are placed, there's a chance
that a fault will call search_extable on the aux with the NULL entry.
Since jit_subprogs already copies state from func[0] to the main
program, include the extable pointer in this state duplication.
Additionally, ensure that the copy of the main program in func[0] is not
added to the bpf_prog_kallsyms table. Instead, let the main program get
added later in bpf_prog_load(). This ensures there is only a single
copy of the main program in the kallsyms table, and that its tag matches
the tag observed by tooling like bpftool.
Cc: stable@vger.kernel.org
Fixes: 1c2a088a66 ("bpf: x64: add JIT support for multi-function programs")
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/6de9b2f4b4724ef56efbb0339daaa66c8b68b1e7.1686616663.git.kjlx@templeofstupid.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
introduced during this -rc cycle or which were considered inappropriate
for a backport.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZIdw7QAKCRDdBJ7gKXxA
jki4AQCygi1UoqVPq4N/NzJbv2GaNDXNmcJIoLvPpp3MYFhucAEAtQNzAYO9z6CT
iLDMosnuh+1KLTaKNGL5iak3NAxnxQw=
=mTdI
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-06-12-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"19 hotfixes. 14 are cc:stable and the remainder address issues which
were introduced during this development cycle or which were considered
inappropriate for a backport"
* tag 'mm-hotfixes-stable-2023-06-12-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
zswap: do not shrink if cgroup may not zswap
page cache: fix page_cache_next/prev_miss off by one
ocfs2: check new file size on fallocate call
mailmap: add entry for John Keeping
mm/damon/core: fix divide error in damon_nr_accesses_to_accesses_bp()
epoll: ep_autoremove_wake_function should use list_del_init_careful
mm/gup_test: fix ioctl fail for compat task
nilfs2: reject devices with insufficient block count
ocfs2: fix use-after-free when unmounting read-only filesystem
lib/test_vmalloc.c: avoid garbage in page array
nilfs2: fix possible out-of-bounds segment allocation in resize ioctl
riscv/purgatory: remove PGO flags
powerpc/purgatory: remove PGO flags
x86/purgatory: remove PGO flags
kexec: support purgatories with .text.hot sections
mm/uffd: allow vma to merge as much as possible
mm/uffd: fix vma operation where start addr cuts part of vma
radix-tree: move declarations to header
nilfs2: fix incomplete buffer cleanup in nilfs_btnode_abort_change_key()
We currently export the bpf_cpumask_any() and bpf_cpumask_any_and()
kfuncs. Intuitively, one would expect these to choose any CPU in the
cpumask, but what they actually do is alias to cpumask_first() and
cpmkas_first_and().
This is useless given that we already export bpf_cpumask_first() and
bpf_cpumask_first_and(), so this patch replaces them with kfuncs that
call cpumask_any_distribute() and cpumask_any_and_distribute(), which
actually choose any CPU from the cpumask (or the AND of two cpumasks for
the latter).
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20230610035053.117605-3-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We currently provide bpf_cpumask_first(), bpf_cpumask_any(), and
bpf_cpumask_any_and() kfuncs. bpf_cpumask_any() and
bpf_cpumask_any_and() are confusing misnomers in that they actually just
call cpumask_first() and cpumask_first_and() respectively.
We'll replace them with bpf_cpumask_any_distribute() and
bpf_cpumask_any_distribute_and() kfuncs in a subsequent patch, so let's
ensure feature parity by adding a bpf_cpumask_first_and() kfunc to
account for bpf_cpumask_any_and() being removed.
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20230610035053.117605-1-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Patch series "kexec: Fix kexec_file_load for llvm16 with PGO", v7.
When upreving llvm I realised that kexec stopped working on my test
platform.
The reason seems to be that due to PGO there are multiple .text sections
on the purgatory, and kexec does not supports that.
This patch (of 4):
Clang16 links the purgatory text in two sections when PGO is in use:
[ 1] .text PROGBITS 0000000000000000 00000040
00000000000011a1 0000000000000000 AX 0 0 16
[ 2] .rela.text RELA 0000000000000000 00003498
0000000000000648 0000000000000018 I 24 1 8
...
[17] .text.hot. PROGBITS 0000000000000000 00003220
000000000000020b 0000000000000000 AX 0 0 1
[18] .rela.text.hot. RELA 0000000000000000 00004428
0000000000000078 0000000000000018 I 24 17 8
And both of them have their range [sh_addr ... sh_addr+sh_size] on the
area pointed by `e_entry`.
This causes that image->start is calculated twice, once for .text and
another time for .text.hot. The second calculation leaves image->start
in a random location.
Because of this, the system crashes immediately after:
kexec_core: Starting new kernel
Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-0-b05c520b7296@chromium.org
Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-1-b05c520b7296@chromium.org
Fixes: 930457057a ("kernel/kexec_file.c: split up __kexec_load_puragory")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Ross Zwisler <zwisler@google.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Rix <trix@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All uses in the kernel are currently already oriented around
suspend/resume. As some other parts of the kernel may also use these
messages in functions that could also be used outside of
suspend/resume, only enable in suspend/resume path.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We found a refcount UAF bug as follows:
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 1 PID: 342 at lib/refcount.c:25 refcount_warn_saturate+0xa0/0x148
Workqueue: events cpuset_hotplug_workfn
Call trace:
refcount_warn_saturate+0xa0/0x148
__refcount_add.constprop.0+0x5c/0x80
css_task_iter_advance_css_set+0xd8/0x210
css_task_iter_advance+0xa8/0x120
css_task_iter_next+0x94/0x158
update_tasks_root_domain+0x58/0x98
rebuild_root_domains+0xa0/0x1b0
rebuild_sched_domains_locked+0x144/0x188
cpuset_hotplug_workfn+0x138/0x5a0
process_one_work+0x1e8/0x448
worker_thread+0x228/0x3e0
kthread+0xe0/0xf0
ret_from_fork+0x10/0x20
then a kernel panic will be triggered as below:
Unable to handle kernel paging request at virtual address 00000000c0000010
Call trace:
cgroup_apply_control_disable+0xa4/0x16c
rebind_subsystems+0x224/0x590
cgroup_destroy_root+0x64/0x2e0
css_free_rwork_fn+0x198/0x2a0
process_one_work+0x1d4/0x4bc
worker_thread+0x158/0x410
kthread+0x108/0x13c
ret_from_fork+0x10/0x18
The race that cause this bug can be shown as below:
(hotplug cpu) | (umount cpuset)
mutex_lock(&cpuset_mutex) | mutex_lock(&cgroup_mutex)
cpuset_hotplug_workfn |
rebuild_root_domains | rebind_subsystems
update_tasks_root_domain | spin_lock_irq(&css_set_lock)
css_task_iter_start | list_move_tail(&cset->e_cset_node[ss->id]
while(css_task_iter_next) | &dcgrp->e_csets[ss->id]);
css_task_iter_end | spin_unlock_irq(&css_set_lock)
mutex_unlock(&cpuset_mutex) | mutex_unlock(&cgroup_mutex)
Inside css_task_iter_start/next/end, css_set_lock is hold and then
released, so when iterating task(left side), the css_set may be moved to
another list(right side), then it->cset_head points to the old list head
and it->cset_pos->next points to the head node of new list, which can't
be used as struct css_set.
To fix this issue, switch from all css_sets to only scgrp's css_sets to
patch in-flight iterators to preserve correct iteration, and then
update it->cset_head as well.
Reported-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://www.spinics.net/lists/cgroups/msg37935.html
Suggested-by: Michal Koutný <mkoutny@suse.com>
Link: https://lore.kernel.org/all/20230526114139.70274-1-xiujianfeng@huaweicloud.com/
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Fixes: 2d8f243a5e ("cgroup: implement cgroup->e_csets[]")
Cc: stable@vger.kernel.org # v3.16+
Signed-off-by: Tejun Heo <tj@kernel.org>
This function is only used when CONFIG_BPF_JIT_ALWAYS_ON is disabled, but
CONFIG_BPF_SYSCALL is enabled. When both are turned off, the prototype is
missing but the unused function is still compiled, as seen from this W=1
warning:
[...]
kernel/bpf/core.c:2075:6: error: no previous prototype for 'bpf_patch_call_args' [-Werror=missing-prototypes]
[...]
Add a matching #ifdef for the definition to leave it out.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20230602135128.1498362-1-arnd@kernel.org
syzbot is again reporting circular locking dependency between
cpu_hotplug_lock and freezer_mutex. Do like what we did with
commit 57dcd64c7e ("cgroup,freezer: hold cpu_hotplug_lock
before freezer_mutex").
Reported-by: syzbot <syzbot+2ab700fe1829880a2ec6@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=2ab700fe1829880a2ec6
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+2ab700fe1829880a2ec6@syzkaller.appspotmail.com>
Fixes: f5d39b0208 ("freezer,sched: Rewrite core freezer logic")
Cc: stable@vger.kernel.org # v6.1+
Signed-off-by: Tejun Heo <tj@kernel.org>
Douglas Anderson