Commit Graph

165 Commits

Author SHA1 Message Date
Linus Torvalds 45824fc0da powerpc updates for 5.4
- Initial support for running on a system with an Ultravisor, which is software
    that runs below the hypervisor and protects guests against some attacks by
    the hypervisor.
 
  - Support for building the kernel to run as a "Secure Virtual Machine", ie. as
    a guest capable of running on a system with an Ultravisor.
 
  - Some changes to our DMA code on bare metal, to allow devices with medium
    sized DMA masks (> 32 && < 59 bits) to use more than 2GB of DMA space.
 
  - Support for firmware assisted crash dumps on bare metal (powernv).
 
  - Two series fixing bugs in and refactoring our PCI EEH code.
 
  - A large series refactoring our exception entry code to use gas macros, both
    to make it more readable and also enable some future optimisations.
 
 As well as many cleanups and other minor features & fixups.
 
 Thanks to:
   Adam Zerella, Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Aneesh
   Kumar K.V, Anju T Sudhakar, Anshuman Khandual, Balbir Singh, Benjamin
   Herrenschmidt, Cédric Le Goater, Christophe JAILLET, Christophe Leroy,
   Christopher M. Riedl, Christoph Hellwig, Claudio Carvalho, Daniel Axtens,
   David Gibson, David Hildenbrand, Desnes A. Nunes do Rosario, Ganesh Goudar,
   Gautham R. Shenoy, Greg Kurz, Guerney Hunt, Gustavo Romero, Halil Pasic, Hari
   Bathini, Joakim Tjernlund, Jonathan Neuschafer, Jordan Niethe, Leonardo Bras,
   Lianbo Jiang, Madhavan Srinivasan, Mahesh Salgaonkar, Mahesh Salgaonkar,
   Masahiro Yamada, Maxiwell S. Garcia, Michael Anderson, Nathan Chancellor,
   Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Qian Cai, Ram
   Pai, Ravi Bangoria, Reza Arbab, Ryan Grimm, Sam Bobroff, Santosh Sivaraj,
   Segher Boessenkool, Sukadev Bhattiprolu, Thiago Bauermann, Thiago Jung
   Bauermann, Thomas Gleixner, Tom Lendacky, Vasant Hegde.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl2EtEcTHG1wZUBlbGxl
 cm1hbi5pZC5hdQAKCRBR6+o8yOGlgPfsD/9uXyBXn3anI/H08+mk74k5gCsmMQpn
 D442CD/ByogZcccp23yBTlhawtCE03hcHnCLygn0Xgd8a4YvHts/RGHUe3fPHqlG
 bEyZ7jsLVz5ebNZQP7r4eGs2pSzCajwJy2N9HJ/C1ojf15rrfRxoVJtnyhE2wXpm
 DL+6o2K+nUCB3gTQ1Inr3DnWzoGOOUfNTOea2u+J+yfHwGRqOBYpevwqiwy5eelK
 aRjUJCqMTvrzra49MeFwjo0Nt3/Y8UNcwA+JlGdeR8bRuWhFrYmyBRiZEKPaujNO
 5EAfghBBlB0KQCqvF/tRM/c0OftHqK59AMobP9T7u9oOaBXeF/FpZX/iXjzNDPsN
 j9Oo2tKLTu/YVEXqBFuREGP+znANr1Wo4CFyOG8SbvYz0HFjR6XbtRJsS+0e8GWl
 kqX5/ZhYz3lBnKSNe9jgWOrh/J0KCSFigBTEWJT3xsn4YE8x8kK2l9KPqAIldWEP
 sKb2UjGS7v0NKq+NvShH88Q9AeQUEIjTcg/9aDDQDe6FaRQ7KiF8bUxSdwSPi+Fn
 j0lnF6i+1ATWZKuCr85veVi7C5qoe/+MqalnmP7MxULyzgXLLxUgN0SzEYO6QofK
 LQK/VaH2XVr5+M5YAb7K4/NX5gbM3s1bKrCiUy4EyHNvgG7gricYdbz6HgAjKpR7
 oP0rHfgmVYvF1g==
 =WlW+
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "This is a bit late, partly due to me travelling, and partly due to a
  power outage knocking out some of my test systems *while* I was
  travelling.

   - Initial support for running on a system with an Ultravisor, which
     is software that runs below the hypervisor and protects guests
     against some attacks by the hypervisor.

   - Support for building the kernel to run as a "Secure Virtual
     Machine", ie. as a guest capable of running on a system with an
     Ultravisor.

   - Some changes to our DMA code on bare metal, to allow devices with
     medium sized DMA masks (> 32 && < 59 bits) to use more than 2GB of
     DMA space.

   - Support for firmware assisted crash dumps on bare metal (powernv).

   - Two series fixing bugs in and refactoring our PCI EEH code.

   - A large series refactoring our exception entry code to use gas
     macros, both to make it more readable and also enable some future
     optimisations.

  As well as many cleanups and other minor features & fixups.

  Thanks to: Adam Zerella, Alexey Kardashevskiy, Alistair Popple, Andrew
  Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anshuman Khandual,
  Balbir Singh, Benjamin Herrenschmidt, Cédric Le Goater, Christophe
  JAILLET, Christophe Leroy, Christopher M. Riedl, Christoph Hellwig,
  Claudio Carvalho, Daniel Axtens, David Gibson, David Hildenbrand,
  Desnes A. Nunes do Rosario, Ganesh Goudar, Gautham R. Shenoy, Greg
  Kurz, Guerney Hunt, Gustavo Romero, Halil Pasic, Hari Bathini, Joakim
  Tjernlund, Jonathan Neuschafer, Jordan Niethe, Leonardo Bras, Lianbo
  Jiang, Madhavan Srinivasan, Mahesh Salgaonkar, Mahesh Salgaonkar,
  Masahiro Yamada, Maxiwell S. Garcia, Michael Anderson, Nathan
  Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver
  O'Halloran, Qian Cai, Ram Pai, Ravi Bangoria, Reza Arbab, Ryan Grimm,
  Sam Bobroff, Santosh Sivaraj, Segher Boessenkool, Sukadev Bhattiprolu,
  Thiago Bauermann, Thiago Jung Bauermann, Thomas Gleixner, Tom
  Lendacky, Vasant Hegde"

* tag 'powerpc-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (264 commits)
  powerpc/mm/mce: Keep irqs disabled during lockless page table walk
  powerpc: Use ftrace_graph_ret_addr() when unwinding
  powerpc/ftrace: Enable HAVE_FUNCTION_GRAPH_RET_ADDR_PTR
  ftrace: Look up the address of return_to_handler() using helpers
  powerpc: dump kernel log before carrying out fadump or kdump
  docs: powerpc: Add missing documentation reference
  powerpc/xmon: Fix output of XIVE IPI
  powerpc/xmon: Improve output of XIVE interrupts
  powerpc/mm/radix: remove useless kernel messages
  powerpc/fadump: support holes in kernel boot memory area
  powerpc/fadump: remove RMA_START and RMA_END macros
  powerpc/fadump: update documentation about option to release opalcore
  powerpc/fadump: consider f/w load area
  powerpc/opalcore: provide an option to invalidate /sys/firmware/opal/core file
  powerpc/opalcore: export /sys/firmware/opal/core for analysing opal crashes
  powerpc/fadump: update documentation about CONFIG_PRESERVE_FA_DUMP
  powerpc/fadump: add support to preserve crash data on FADUMP disabled kernel
  powerpc/fadump: improve how crashed kernel's memory is reserved
  powerpc/fadump: consider reserved ranges while releasing memory
  powerpc/fadump: make crash memory ranges array allocation generic
  ...
2019-09-20 11:48:06 -07:00
Linus Torvalds 671df18953 dma-mapping updates for 5.4:
- add dma-mapping and block layer helpers to take care of IOMMU
    merging for mmc plus subsequent fixups (Yoshihiro Shimoda)
  - rework handling of the pgprot bits for remapping (me)
  - take care of the dma direct infrastructure for swiotlb-xen (me)
  - improve the dma noncoherent remapping infrastructure (me)
  - better defaults for ->mmap, ->get_sgtable and ->get_required_mask (me)
  - cleanup mmaping of coherent DMA allocations (me)
  - various misc cleanups (Andy Shevchenko, me)
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAl2CSucLHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYPfrhAAgXZA/EdFPvkkCoDrmgtf3XkudX9gajeCd9g4NZy6
 ZBQElTVvm4S0sQj7IXgALnMumDMbbTibW5SQLX5GwQDe+XXBpZ8ajpAnJAXc8a5T
 qaFQ4SInr4CgBZf9nZKDkbSBZ1Tu3AQm1c0QI8riRCkrVTuX4L06xpCef4Yh4mgO
 rwWEjIioYpQiKZMmu98riXh3ZNfFG3mVJRhKt8B6XJbBgnUnjDOPYGgaUwp6CU20
 tFBKL2GaaV0vdLJ5wYhIGXT4DJ8tp9T5n3IYGZv1Ux889RaZEHlCrMxzelYeDbCT
 KhZbhcSECGnddsh73t/UX7/KhytuqnfKa9n+Xo6AWuA47xO4c36quOOcTk9M0vE5
 TfGDmewgL6WIv4lzokpRn5EkfDhyL33j8eYJrJ8e0ldcOhSQIFk4ciXnf2stWi6O
 JrlzzzSid+zXxu48iTfoPdnMr7psTpiMvvRvKfEeMp2FX9Fg6EdMzJYLTEl+COHB
 0WwNacZmY3P01+b5EZXEgqKEZevIIdmPKbyM9rPtTjz8BjBwkABHTpN3fWbVBf7/
 Ax6OPYyW40xp1fnJuzn89m3pdOxn88FpDdOaeLz892Zd+Qpnro1ayulnFspVtqGM
 mGbzA9whILvXNRpWBSQrvr2IjqMRjbBxX3BVACl3MMpOChgkpp5iANNfSDjCftSF
 Zu8=
 =/wGv
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping updates from Christoph Hellwig:

 - add dma-mapping and block layer helpers to take care of IOMMU merging
   for mmc plus subsequent fixups (Yoshihiro Shimoda)

 - rework handling of the pgprot bits for remapping (me)

 - take care of the dma direct infrastructure for swiotlb-xen (me)

 - improve the dma noncoherent remapping infrastructure (me)

 - better defaults for ->mmap, ->get_sgtable and ->get_required_mask
   (me)

 - cleanup mmaping of coherent DMA allocations (me)

 - various misc cleanups (Andy Shevchenko, me)

* tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping: (41 commits)
  mmc: renesas_sdhi_internal_dmac: Add MMC_CAP2_MERGE_CAPABLE
  mmc: queue: Fix bigger segments usage
  arm64: use asm-generic/dma-mapping.h
  swiotlb-xen: merge xen_unmap_single into xen_swiotlb_unmap_page
  swiotlb-xen: simplify cache maintainance
  swiotlb-xen: use the same foreign page check everywhere
  swiotlb-xen: remove xen_swiotlb_dma_mmap and xen_swiotlb_dma_get_sgtable
  xen: remove the exports for xen_{create,destroy}_contiguous_region
  xen/arm: remove xen_dma_ops
  xen/arm: simplify dma_cache_maint
  xen/arm: use dev_is_dma_coherent
  xen/arm: consolidate page-coherent.h
  xen/arm: use dma-noncoherent.h calls for xen-swiotlb cache maintainance
  arm: remove wrappers for the generic dma remap helpers
  dma-mapping: introduce a dma_common_find_pages helper
  dma-mapping: always use VM_DMA_COHERENT for generic DMA remap
  vmalloc: lift the arm flag for coherent mappings to common code
  dma-mapping: provide a better default ->get_required_mask
  dma-mapping: remove the dma_declare_coherent_memory export
  remoteproc: don't allow modular build
  ...
2019-09-19 13:27:23 -07:00
Joerg Roedel e95adb9add Merge branches 'arm/omap', 'arm/exynos', 'arm/smmu', 'arm/mediatek', 'arm/qcom', 'arm/renesas', 'x86/amd', 'x86/vt-d' and 'core' into next 2019-09-11 12:39:19 +02:00
Lu Baolu 3fc1ca0065 swiotlb: Split size parameter to map/unmap APIs
This splits the size parameter to swiotlb_tbl_map_single() and
swiotlb_tbl_unmap_single() into an alloc_size and a mapping_size
parameter, where the latter one is rounded up to the iommu page
size.

Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-09-11 12:34:29 +02:00
Christoph Hellwig 5cf4537975 dma-mapping: introduce a dma_common_find_pages helper
A helper to find the backing page array based on a virtual address.
This also ensures we do the same vm_flags check everywhere instead
of slightly different or missing ones in a few places.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-09-04 11:13:20 +02:00
Christoph Hellwig 512317401f dma-mapping: always use VM_DMA_COHERENT for generic DMA remap
Currently the generic dma remap allocator gets a vm_flags passed by
the caller that is a little confusing.  We just introduced a generic
vmalloc-level flag to identify the dma coherent allocations, so use
that everywhere and remove the now pointless argument.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-09-04 11:13:20 +02:00
Christoph Hellwig 249baa5479 dma-mapping: provide a better default ->get_required_mask
Most dma_map_ops instances are IOMMUs that work perfectly fine in 32-bits
of IOVA space, and the generic direct mapping code already provides its
own routines that is intelligent based on the amount of memory actually
present.  Wire up the dma-direct routine for the ARM direct mapping code
as well, and otherwise default to the constant 32-bit mask.  This way
we only need to override it for the occasional odd IOMMU that requires
64-bit IOVA support, or IOMMU drivers that are more efficient if they
can fall back to the direct mapping.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-09-04 11:13:19 +02:00
Christoph Hellwig d9295532d5 dma-mapping: remove the dma_declare_coherent_memory export
dma_declare_coherent_memory is something that the platform setup code
(which pretty much means the device tree these days) need to do so that
drivers can use the memory as declared by the platform.  Drivers
themselves have no business calling this function.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-09-04 11:13:19 +02:00
Christoph Hellwig 7a01ee4220 dma-mapping: remove the dma_mmap_from_dev_coherent export
dma_mmap_from_dev_coherent is only used by dma_map_ops instances,
none of which is modular.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-09-04 11:13:19 +02:00
Christoph Hellwig 1fa0682448 dma-mapping: remove dma_release_declared_memory
This function is entirely unused given that declared memory is
generally provided by platform setup code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-09-04 11:13:19 +02:00
Christoph Hellwig 62fcee9a3b dma-mapping: remove CONFIG_ARCH_NO_COHERENT_DMA_MMAP
CONFIG_ARCH_NO_COHERENT_DMA_MMAP is now functionally identical to
!CONFIG_MMU, so remove the separate symbol.  The only difference is that
arm did not set it for !CONFIG_MMU, but arm uses a separate dma mapping
implementation including its own mmap method, which is handled by moving
the CONFIG_MMU check in dma_can_mmap so that is only applies to the
dma-direct case, just as the other ifdefs for it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>	# m68k
2019-09-04 11:13:18 +02:00
Christoph Hellwig e29ccc188f dma-mapping: add a dma_can_mmap helper
Add a helper to check if DMA allocations for a specific device can be
mapped to userspace using dma_mmap_*.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-09-04 11:13:18 +02:00
Christoph Hellwig f9f3232a7d dma-mapping: explicitly wire up ->mmap and ->get_sgtable
While the default ->mmap and ->get_sgtable implementations work for the
majority of our dma_map_ops impementations they are inherently safe
for others that don't use the page allocator or CMA and/or use their
own way of remapping not covered by the common code.  So remove the
defaults if these methods are not wired up, but instead wire up the
default implementations for all safe instances.

Fixes: e1c7e32453 ("dma-mapping: always provide the dma_map_ops based implementation")
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-09-04 11:13:18 +02:00
Christoph Hellwig 1445146701 dma-mapping: move the dma_get_sgtable API comments from arm to common code
The comments are spot on and should be near the central API, not just
near a single implementation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-09-04 11:13:17 +02:00
Yoshihiro Shimoda 6ba99411b8 dma-mapping: introduce dma_get_merge_boundary()
This patch adds a new DMA API "dma_get_merge_boundary". This function
returns the DMA merge boundary if the DMA layer can merge the segments.
This patch also adds the implementation for a new dma_map_ops pointer.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-09-03 08:33:01 +02:00
Christoph Hellwig 8e3a68fb55 dma-mapping: make dma_atomic_pool_init self-contained
The memory allocated for the atomic pool needs to have the same
mapping attributes that we use for remapping, so use
pgprot_dmacoherent instead of open coding it.  Also deduct a
suitable zone to allocate the memory from based on the presence
of the DMA zones.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-08-29 16:43:33 +02:00
Christoph Hellwig 419e2f1838 dma-mapping: remove arch_dma_mmap_pgprot
arch_dma_mmap_pgprot is used for two things:

 1) to override the "normal" uncached page attributes for mapping
    memory coherent to devices that can't snoop the CPU caches
 2) to provide the special DMA_ATTR_WRITE_COMBINE semantics on older
    arm systems and some mips platforms

Replace one with the pgprot_dmacoherent macro that is already provided
by arm and much simpler to use, and lift the DMA_ATTR_WRITE_COMBINE
handling to common code with an explicit arch opt-in.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>	# m68k
Acked-by: Paul Burton <paul.burton@mips.com>		# mips
2019-08-29 16:43:22 +02:00
Christoph Hellwig 90ae409f9e dma-direct: fix zone selection after an unaddressable CMA allocation
The new dma_alloc_contiguous hides if we allocate CMA or regular
pages, and thus fails to retry a ZONE_NORMAL allocation if the CMA
allocation succeeds but isn't addressable.  That means we either fail
outright or dip into a small zone that might not succeed either.

Thanks to Hillf Danton for debugging this issue.

Fixes: b1d2dc009d ("dma-contiguous: add dma_{alloc,free}_contiguous() helpers")
Reported-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
2019-08-21 07:14:10 +09:00
Christoph Hellwig 33dcb37cef dma-mapping: fix page attributes for dma_mmap_*
All the way back to introducing dma_common_mmap we've defaulted to mark
the pages as uncached.  But this is wrong for DMA coherent devices.
Later on DMA_ATTR_WRITE_COMBINE also got incorrect treatment as that
flag is only treated special on the alloc side for non-coherent devices.

Introduce a new dma_pgprot helper that deals with the check for coherent
devices so that only the remapping cases ever reach arch_dma_mmap_pgprot
and we thus ensure no aliasing of page attributes happens, which makes
the powerpc version of arch_dma_mmap_pgprot obsolete and simplifies the
remaining ones.

Note that this means arch_dma_mmap_pgprot is a bit misnamed now, but
we'll phase it out soon.

Fixes: 64ccc9c033 ("common: dma-mapping: add support for generic dma_mmap_* calls")
Reported-by: Shawn Anastasio <shawn@anastas.io>
Reported-by: Gavin Li <git@thegavinli.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> # arm64
2019-08-10 19:52:45 +02:00
Lucas Stach d8ad55538a dma-direct: don't truncate dma_required_mask to bus addressing capabilities
The dma required_mask needs to reflect the actual addressing capabilities
needed to handle the whole system RAM. When truncated down to the bus
addressing capabilities dma_addressing_limited() will incorrectly signal
no limitations for devices which are restricted by the bus_dma_mask.

Fixes: b4ebe60632 (dma-direct: implement complete bus_dma_mask handling)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-08-10 19:52:45 +02:00
Christoph Hellwig cf14be0b41 dma-direct: fix DMA_ATTR_NO_KERNEL_MAPPING
The new DMA_ATTR_NO_KERNEL_MAPPING needs to actually assign
a dma_addr to work.  Also skip it if the architecture needs
forced decryption handling, as that needs a kernel virtual
address.

Fixes: d98849aff8 (dma-direct: handle DMA_ATTR_NO_KERNEL_MAPPING in common code)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2019-08-10 19:52:45 +02:00
Thiago Jung Bauermann e740815a97 dma-mapping: Remove dma_check_mask()
sme_active() is an x86-specific function so it's better not to call it from
generic code. Christoph Hellwig mentioned that "There is no reason why we
should have a special debug printk just for one specific reason why there
is a requirement for a large DMA mask.", so just remove dma_check_mask().

Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190806044919.10622-4-bauerman@linux.ibm.com
2019-08-09 22:52:07 +10:00
Thiago Jung Bauermann 47e5d8f9ed swiotlb: Remove call to sme_active()
sme_active() is an x86-specific function so it's better not to call it from
generic code.

There's no need to mention which memory encryption feature is active, so
just use a more generic message. Besides, other architectures will have
different names for similar technology.

Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190806044919.10622-3-bauerman@linux.ibm.com
2019-08-09 22:52:06 +10:00
Linus Torvalds 234172f6bb add swiotlb support to arm
This fixes a cascade of regressions that originally started with
 the addition of the ia64 port, but only got fatal once we removed
 most uses of block layer bounce buffering in Linux 4.18.
 
 The reason is that while the original i386/PAE code that was the first
 architecture that supported > 4GB of memory without an iommu decided to
 leave bounce buffering to the subsystems, which in those days just mean
 block and networking as no one else consumer arbitrary userspace memory.
 
 Later with ia64, x86_64 and other ports we assumed that either an iommu
 or something that fakes it up ("software IOTLB" in beautiful Intel
 speak) is present and that subsystems can rely on that for dealing with
 addressing limitations in devices.   Except that the ARM LPAE scheme
 that added larger physical address to 32-bit ARM did not follow that
 scheme and thus only worked by chance and only for block and networking
 I/O directly to highmem.
 
 Long story, short fix - add swiotlb support to arm when build for LPAE
 platforms, which actuallys turns out to be pretty trivial with the
 modern dma-direct / swiotlb code to fix the Linux 4.18-ish regression.
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAl1DFj8LHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYPFqg/+Oh62VCFCkIK07NAeTq6EmrfHI8I1Wm/SFWPOOB+a
 vm7nMcSG3C8K8PRHzGc6Zk3SC1+RrHghcyKw54yLT1Mhroakv6Um7p2y8S3M4tmZ
 uEg8yYbtzxvuaY9T42s2msZURbBCEELzA2bYbQzgQ1zczRI1zuMI07ssMr91IQ91
 HC1OjAUoxUkp/+2uU/X2k6DvPQLSJSyWvKgbi1bjNpE+FRCKJP+2a2K3psBQuDBe
 aJXiz/kD2L/JNvF/e4c414d5GnGXwtIYs1kbskmnj3LeToS+JjX+6ZcENorpScIP
 c20s/3H6nsb14TFy548rJUlAHdcd9kOdeTw+0oPUliNLCogGs6FKNU4N5gVAo+bC
 AWDP0wMHMWkrVz6lQL9PR78IHrHOxFYS5/uHsqqdKo5YTsgaHnwKEiPxX1aiKQ67
 ovUrOnGRo4R9Y4YwD+BbHY9qw9jFMqazBdLWMivK5NxqltsahOug8w2emTFfXzQn
 m4APJYa0RVJA4mkh3ejcci5qHyyzPOjslyIJn7eaJPV2rknkxRn9UngkgJLnzHfc
 +lKiD1zaRy82nV4auPjYRiOdAoQN40YFB/RT16OVkjkT+jJEE2UAMjqh2SRlRusp
 Ce8vK7pw6VpDNGJRQveQA+1n9OR/jl0Jf8R7GFRrf9c/bM1J8GErJ6xS/EwNPrgI
 5dE=
 =D6Uy
 -----END PGP SIGNATURE-----

Merge tag 'arm-swiotlb-5.3' of git://git.infradead.org/users/hch/dma-mapping

Pull arm swiotlb support from Christoph Hellwig:
 "This fixes a cascade of regressions that originally started with the
  addition of the ia64 port, but only got fatal once we removed most
  uses of block layer bounce buffering in Linux 4.18.

  The reason is that while the original i386/PAE code that was the first
  architecture that supported > 4GB of memory without an iommu decided
  to leave bounce buffering to the subsystems, which in those days just
  mean block and networking as no one else consumed arbitrary userspace
  memory.

  Later with ia64, x86_64 and other ports we assumed that either an
  iommu or something that fakes it up ("software IOTLB" in beautiful
  Intel speak) is present and that subsystems can rely on that for
  dealing with addressing limitations in devices. Except that the ARM
  LPAE scheme that added larger physical address to 32-bit ARM did not
  follow that scheme and thus only worked by chance and only for block
  and networking I/O directly to highmem.

  Long story, short fix - add swiotlb support to arm when build for LPAE
  platforms, which actuallys turns out to be pretty trivial with the
  modern dma-direct / swiotlb code to fix the Linux 4.18-ish regression"

* tag 'arm-swiotlb-5.3' of git://git.infradead.org/users/hch/dma-mapping:
  arm: use swiotlb for bounce buffering on LPAE configs
  dma-mapping: check pfn validity in dma_common_{mmap,get_sgtable}
2019-08-02 08:44:33 -07:00
Nicolin Chen f46cc01525 dma-contiguous: page-align the size in dma_free_contiguous()
According to the original dma_direct_alloc_pages() code:
{
	unsigned int count = PAGE_ALIGN(size) >> PAGE_SHIFT;

	if (!dma_release_from_contiguous(dev, page, count))
		__free_pages(page, get_order(size));
}

The count parameter for dma_release_from_contiguous() was page
aligned before the right-shifting operation, while the new API
dma_free_contiguous() forgets to have PAGE_ALIGN() at the size.

So this patch simply adds it to prevent any corner case.

Fixes: fdaeec198ada ("dma-contiguous: add dma_{alloc,free}_contiguous() helpers")
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-29 09:50:04 +03:00
Nicolin Chen c6622a425a dma-contiguous: do not overwrite align in dma_alloc_contiguous()
The dma_alloc_contiguous() limits align at CONFIG_CMA_ALIGNMENT for
cma_alloc() however it does not restore it for the fallback routine.
This will result in a size mismatch between the allocation and free
when running into the fallback routines after cma_alloc() fails, if
the align is larger than CONFIG_CMA_ALIGNMENT.

This patch adds a cma_align to take care of cma_alloc() and prevent
the align from being overwritten.

Fixes: fdaeec198ada ("dma-contiguous: add dma_{alloc,free}_contiguous() helpers")
Reported-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-29 09:50:04 +03:00
Christoph Hellwig 66d7780f18 dma-mapping: check pfn validity in dma_common_{mmap,get_sgtable}
Check that the pfn returned from arch_dma_coherent_to_pfn refers to
a valid page and reject the mmap / get_sgtable requests otherwise.

Based on the arm implementation of the mmap and get_sgtable methods.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-07-24 17:28:54 +02:00
Linus Torvalds ac60602a6d dma-mapping fixes for 5.3-rc1
Fix various regressions:
 
  - force unencrypted dma-coherent buffers if encryption bit can't fit
    into the dma coherent mask (Tom Lendacky)
  - avoid limiting request size if swiotlb is not used (me)
  - fix swiotlb handling in dma_direct_sync_sg_for_cpu/device
    (Fugang Duan)
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAl0zTvELHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYMAsQ/6AleklMsMbc1xPsYYMukmjAOUNf+nvsFG4PRs/KVn
 1/Yohkxx/FN3oXZ+zZEnyd8a5u0ghwkN1WDivEhpclzbDuQP+Z+jEDmb37Oea4aJ
 L6XRLQJYiFwwEA6oJ87FNVMZXK/QUo+/lnDvJg0xNW6+HiR4GAUmnqy+/KyEIRSf
 SX+aiUOX4tUkwHPWyMaWvTlZ4hZgSovXwkUnR08jCwyJFezUwJBr/Yf5G6M1C10B
 hPFTrREhaekXgFd5E1dwKNk5omvfihxGyVUujFZhtMvs//LP8GcFLcVtYRWM/SUZ
 XpKkXxnaRC0gEm2P4/tSEGL3xl1CST/oYde74KNBQDIe0svGFS0QrP68+4zu/1ih
 vaf2gHoCoJciFY2DHglw1OG/gMWW06OtdseOKe9LZXtsGA6HCVBZW4c01V5YHVQT
 TMQMr0UyxJzmrxCo+LafAf9DoQxIii8WapewomwceL0TUtIDIujirzC/ieLhNPKL
 L2Fk+zPtFL24IpVe52S1PngatlW4MioiyiJji1QM0RK1V68+r/nSKPBxeq9s+jR3
 CfGvfhfRDd/NbZ9m66YFUaRzHL6Fpi2hMvJc9O6dgcVEYEBrL0d8J9nH42cqOlfe
 OBGeCxnFNQMuBp4Tw1OZO9PjzR3+pQOb32pOWLDUUs9ed3gtdMrJYTKhw9/cLpyp
 838=
 =Bv+Q
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-5.3-1' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping fixes from Christoph Hellwig:
 "Fix various regressions:

   - force unencrypted dma-coherent buffers if encryption bit can't fit
     into the dma coherent mask (Tom Lendacky)

   - avoid limiting request size if swiotlb is not used (me)

   - fix swiotlb handling in dma_direct_sync_sg_for_cpu/device (Fugang
     Duan)"

* tag 'dma-mapping-5.3-1' of git://git.infradead.org/users/hch/dma-mapping:
  dma-direct: correct the physical addr in dma_direct_sync_sg_for_cpu/device
  dma-direct: only limit the mapping size if swiotlb could be used
  dma-mapping: add a dma_addressing_limited helper
  dma-direct: Force unencrypted DMA under SME for certain DMA masks
2019-07-20 12:09:52 -07:00
Fugang Duan 449fa54d68 dma-direct: correct the physical addr in dma_direct_sync_sg_for_cpu/device
dma_map_sg() may use swiotlb buffer when the kernel command line includes
"swiotlb=force" or the dma_addr is out of dev->dma_mask range.  After
DMA complete the memory moving from device to memory, then user call
dma_sync_sg_for_cpu() to sync with DMA buffer, and copy the original
virtual buffer to other space.

So dma_direct_sync_sg_for_cpu() should use swiotlb physical addr, not
the original physical addr from sg_phys(sg).

dma_direct_sync_sg_for_device() also has the same issue, correct it as
well.

Fixes: 55897af63091("dma-direct: merge swiotlb_dma_ops into the dma_direct code")
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-19 14:09:40 +02:00
Linus Torvalds d4df33b0e9 Merge branch 'for-linus-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb
Pull swiotlb updates from Konrad Rzeszutek Wilk:
 "One compiler fix, and a bug-fix in swiotlb_nr_tbl() and
  swiotlb_max_segment() to check also for no_iotlb_memory"

* 'for-linus-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
  swiotlb: fix phys_addr_t overflow warning
  swiotlb: Return consistent SWIOTLB segments/nr_tbl
  swiotlb: Group identical cleanup in swiotlb_cleanup()
2019-07-18 11:48:05 -07:00
Christoph Hellwig a5008b59cd dma-direct: only limit the mapping size if swiotlb could be used
Don't just check for a swiotlb buffer, but also if buffering might
be required for this particular device.

Fixes: 133d624b1c ("dma: Introduce dma_max_mapping_size()")
Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2019-07-17 08:25:45 +02:00
Tom Lendacky 9087c37584 dma-direct: Force unencrypted DMA under SME for certain DMA masks
If a device doesn't support DMA to a physical address that includes the
encryption bit (currently bit 47, so 48-bit DMA), then the DMA must
occur to unencrypted memory. SWIOTLB is used to satisfy that requirement
if an IOMMU is not active (enabled or configured in passthrough mode).

However, commit fafadcd165 ("swiotlb: don't dip into swiotlb pool for
coherent allocations") modified the coherent allocation support in
SWIOTLB to use the DMA direct coherent allocation support. When an IOMMU
is not active, this resulted in dma_alloc_coherent() failing for devices
that didn't support DMA addresses that included the encryption bit.

Addressing this requires changes to the force_dma_unencrypted() function
in kernel/dma/direct.c. Since the function is now non-trivial and
SME/SEV specific, update the DMA direct support to add an arch override
for the force_dma_unencrypted() function. The arch override is selected
when CONFIG_AMD_MEM_ENCRYPT is set. The arch override function resides in
the arch/x86/mm/mem_encrypt.c file and forces unencrypted DMA when either
SEV is active or SME is active and the device does not support DMA to
physical addresses that include the encryption bit.

Fixes: fafadcd165 ("swiotlb: don't dip into swiotlb pool for coherent allocations")
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
[hch: moved the force_dma_unencrypted declaration to dma-mapping.h,
      fold the s390 fix from Halil Pasic]
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-16 22:15:46 +02:00
Linus Torvalds 9e3a25dc99 dma-mapping updates for Linux 5.3
- move the USB special case that bounced DMA through a device
    bar into the USB code instead of handling it in the common
    DMA code (Laurentiu Tudor and Fredrik Noring)
  - don't dip into the global CMA pool for single page allocations
    (Nicolin Chen)
  - fix a crash when allocating memory for the atomic pool failed
    during boot (Florian Fainelli)
  - move support for MIPS-style uncached segments to the common
    code and use that for MIPS and nios2 (me)
  - make support for DMA_ATTR_NON_CONSISTENT and
    DMA_ATTR_NO_KERNEL_MAPPING generic (me)
  - convert nds32 to the generic remapping allocator (me)
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAl0nPqgLHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYNj2hAAxIv2O3wv6V5xhzWwOVo8e/xW1ZLlGAF0/z92u0do
 32Tm8jkdAGjZDnyxam7qisMSIjCNykpauQzVVxyUNBRSsn1V5t7KSaH3/OXCOVcr
 x2VWBirxGO2BbRseaCBjIcA/2qna+VIDGFcNXCtf6rM00YUK6qaJzkMwBKQAeYcM
 uJMJkaf8qaW4hygLJP8axXiGFdIJyFNLAlJ+ok6kYsJHHJNceOp0bo3CDa2mJBK9
 IhraK2zVkyE5EQkQM5cE/Kw1ppPelUKUkHwjgM4wpz2b18WbLu11nKP0hmUcvKRQ
 heY8xWiKxN0QTgS03ou7EVylyrSAE4dIKgzuA4VO32QCGsWypcAg4iU6s5TX6p9g
 tZEW2ckE6wbmRdQPyKoDpZg299/eQjRHc4MAA1yinT8tFMokw2tk8Fq1FWyltwL1
 8EiP5oNs2qUNvNgqUresl6/f6YOacFi1Q6IhgBVj6d6lyhMhlsHfW4w1XA1siv/I
 6l4qJbLohYab6hY7i+mBOd8iG/KrAlr4P6admnv2jDchswbb5t2j+ABE9xv++PFi
 u1HFqMlxqdWQaXGca2UeCUxUjkwO9N+kHpP+VRz+6D2b64dtCWSu8CN23sYXm2tO
 ubWIlrQQZPhhMkoFg7XqKSTacd+ut+SXN9Nxsyv548ETV0l1xbiLRHIbhyoIESD5
 RAI=
 =01Fr
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-5.3' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping updates from Christoph Hellwig:

 - move the USB special case that bounced DMA through a device bar into
   the USB code instead of handling it in the common DMA code (Laurentiu
   Tudor and Fredrik Noring)

 - don't dip into the global CMA pool for single page allocations
   (Nicolin Chen)

 - fix a crash when allocating memory for the atomic pool failed during
   boot (Florian Fainelli)

 - move support for MIPS-style uncached segments to the common code and
   use that for MIPS and nios2 (me)

 - make support for DMA_ATTR_NON_CONSISTENT and
   DMA_ATTR_NO_KERNEL_MAPPING generic (me)

 - convert nds32 to the generic remapping allocator (me)

* tag 'dma-mapping-5.3' of git://git.infradead.org/users/hch/dma-mapping: (29 commits)
  dma-mapping: mark dma_alloc_need_uncached as __always_inline
  MIPS: only select ARCH_HAS_UNCACHED_SEGMENT for non-coherent platforms
  usb: host: Fix excessive alignment restriction for local memory allocations
  lib/genalloc.c: Add algorithm, align and zeroed family of DMA allocators
  nios2: use the generic uncached segment support in dma-direct
  nds32: use the generic remapping allocator for coherent DMA allocations
  arc: use the generic remapping allocator for coherent DMA allocations
  dma-direct: handle DMA_ATTR_NO_KERNEL_MAPPING in common code
  dma-direct: handle DMA_ATTR_NON_CONSISTENT in common code
  dma-mapping: add a dma_alloc_need_uncached helper
  openrisc: remove the partial DMA_ATTR_NON_CONSISTENT support
  arc: remove the partial DMA_ATTR_NON_CONSISTENT support
  arm-nommu: remove the partial DMA_ATTR_NON_CONSISTENT support
  ARM: dma-mapping: allow larger DMA mask than supported
  dma-mapping: truncate dma masks to what dma_addr_t can hold
  iommu/dma: Apply dma_{alloc,free}_contiguous functions
  dma-remap: Avoid de-referencing NULL atomic_pool
  MIPS: use the generic uncached segment support in dma-direct
  dma-direct: provide generic support for uncached kernel segments
  au1100fb: fix DMA API abuse
  ...
2019-07-12 15:13:55 -07:00
Linus Torvalds f632a8170a Driver Core and debugfs changes for 5.3-rc1
Here is the "big" driver core and debugfs changes for 5.3-rc1
 
 It's a lot of different patches, all across the tree due to some api
 changes and lots of debugfs cleanups.  Because of this, there is going
 to be some merge issues with your tree at the moment, I'll follow up
 with the expected resolutions to make it easier for you.
 
 Other than the debugfs cleanups, in this set of changes we have:
 	- bus iteration function cleanups (will cause build warnings
 	  with s390 and coresight drivers in your tree)
 	- scripts/get_abi.pl tool to display and parse Documentation/ABI
 	  entries in a simple way
 	- cleanups to Documenatation/ABI/ entries to make them parse
 	  easier due to typos and other minor things
 	- default_attrs use for some ktype users
 	- driver model documentation file conversions to .rst
 	- compressed firmware file loading
 	- deferred probe fixes
 
 All of these have been in linux-next for a while, with a bunch of merge
 issues that Stephen has been patient with me for.  Other than the merge
 issues, functionality is working properly in linux-next :)
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXSgpnQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykcwgCfS30OR4JmwZydWGJ7zK/cHqk+KjsAnjOxjC1K
 LpRyb3zX29oChFaZkc5a
 =XrEZ
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core and debugfs updates from Greg KH:
 "Here is the "big" driver core and debugfs changes for 5.3-rc1

  It's a lot of different patches, all across the tree due to some api
  changes and lots of debugfs cleanups.

  Other than the debugfs cleanups, in this set of changes we have:

   - bus iteration function cleanups

   - scripts/get_abi.pl tool to display and parse Documentation/ABI
     entries in a simple way

   - cleanups to Documenatation/ABI/ entries to make them parse easier
     due to typos and other minor things

   - default_attrs use for some ktype users

   - driver model documentation file conversions to .rst

   - compressed firmware file loading

   - deferred probe fixes

  All of these have been in linux-next for a while, with a bunch of
  merge issues that Stephen has been patient with me for"

* tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits)
  debugfs: make error message a bit more verbose
  orangefs: fix build warning from debugfs cleanup patch
  ubifs: fix build warning after debugfs cleanup patch
  driver: core: Allow subsystems to continue deferring probe
  drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT
  arch_topology: Remove error messages on out-of-memory conditions
  lib: notifier-error-inject: no need to check return value of debugfs_create functions
  swiotlb: no need to check return value of debugfs_create functions
  ceph: no need to check return value of debugfs_create functions
  sunrpc: no need to check return value of debugfs_create functions
  ubifs: no need to check return value of debugfs_create functions
  orangefs: no need to check return value of debugfs_create functions
  nfsd: no need to check return value of debugfs_create functions
  lib: 842: no need to check return value of debugfs_create functions
  debugfs: provide pr_fmt() macro
  debugfs: log errors when something goes wrong
  drivers: s390/cio: Fix compilation warning about const qualifiers
  drivers: Add generic helper to match by of_node
  driver_find_device: Unify the match function with class_find_device()
  bus_find_device: Unify the match callback with class_find_device
  ...
2019-07-12 12:24:03 -07:00
Greg Kroah-Hartman 1be51474f9 swiotlb: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: iommu@lists.linux-foundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20190612144314.GA16803@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03 16:57:18 +02:00
Christoph Hellwig d98849aff8 dma-direct: handle DMA_ATTR_NO_KERNEL_MAPPING in common code
DMA_ATTR_NO_KERNEL_MAPPING is generally implemented by allocating
normal cacheable pages or CMA memory, and then returning the page
pointer as the opaque handle.  Lift that code from the xtensa and
generic dma remapping implementations into the generic dma-direct
code so that we don't even call arch_dma_alloc for these allocations.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-06-25 14:28:05 +02:00
Christoph Hellwig c2f2124e0d dma-direct: handle DMA_ATTR_NON_CONSISTENT in common code
Only call into arch_dma_alloc if we require an uncached mapping,
and remove the parisc code manually doing normal cached
DMA_ATTR_NON_CONSISTENT allocations.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Helge Deller <deller@gmx.de> # parisc
2019-06-25 14:27:58 +02:00
Christoph Hellwig 4b85faed21 dma-mapping: add a dma_alloc_need_uncached helper
Check if we need to allocate uncached memory for a device given the
allocation flags.  Switch over the uncached segment check to this helper
to deal with architectures that do not support the dma_cache_sync
operation and thus should not returned cacheable memory for
DMA_ATTR_NON_CONSISTENT allocations.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-06-25 08:14:43 +02:00
Christoph Hellwig 4a54d16f61 dma-mapping: truncate dma masks to what dma_addr_t can hold
The dma masks in struct device are always 64-bits wide.  But for builds
using a 32-bit dma_addr_t we need to ensure we don't store an
unsupportable value.  Before Linux 5.0 this was handled at least by
the ARM dma mapping code by never allowing to set a larger dma_mask,
but these days we allow the driver to just set the largest supported
value and never fall back to a smaller one.  Ensure this always works
by truncating the value.

Fixes: 9eb9e96e97 ("Documentation/DMA-API-HOWTO: update dma_mask sections")
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-06-25 07:54:06 +02:00
Konrad Rzeszutek Wilk 8492101e15 Merge branch 'stable/for-linus-5.2' into devel/for-linus-5.2
* stable/for-linus-5.2:
  swiotlb: fix phys_addr_t overflow warning
2019-06-19 10:29:24 -04:00
Arnd Bergmann 9c106119f6 swiotlb: fix phys_addr_t overflow warning
On architectures that have a larger dma_addr_t than phys_addr_t,
the swiotlb_tbl_map_single() function truncates its return code
in the failure path, making it impossible to identify the error
later, as we compare to the original value:

kernel/dma/swiotlb.c:551:9: error: implicit conversion from 'dma_addr_t' (aka 'unsigned long long') to 'phys_addr_t' (aka 'unsigned int') changes value from 18446744073709551615 to 4294967295 [-Werror,-Wconstant-conversion]
        return DMA_MAPPING_ERROR;

Use an explicit typecast here to convert it to the narrower type,
and use the same expression in the error handling later.

Fixes: b907e20508 ("swiotlb: remove SWIOTLB_MAP_ERROR")
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2019-06-19 10:28:54 -04:00
Florian Fainelli 4b4b077cbd dma-remap: Avoid de-referencing NULL atomic_pool
With architectures allowing the kernel to be placed almost arbitrarily
in memory (e.g.: ARM64), it is possible to have the kernel resides at
physical addresses above 4GB, resulting in neither the default CMA area,
nor the atomic pool from successfully allocating. This does not prevent
specific peripherals from working though, one example is XHCI, which
still operates correctly.

Trouble comes when the XHCI driver gets suspended and resumed, since we
can now trigger the following NPD:

[   12.664170] usb usb1: root hub lost power or was reset
[   12.669387] usb usb2: root hub lost power or was reset
[   12.674662] Unable to handle kernel NULL pointer dereference at virtual address 00000008
[   12.682896] pgd = ffffffc1365a7000
[   12.686386] [00000008] *pgd=0000000136500003, *pud=0000000136500003, *pmd=0000000000000000
[   12.694897] Internal error: Oops: 96000006 [#1] SMP
[   12.699843] Modules linked in:
[   12.702980] CPU: 0 PID: 1499 Comm: pml Not tainted 4.9.135-1.13pre #51
[   12.709577] Hardware name: BCM97268DV (DT)
[   12.713736] task: ffffffc136bb6540 task.stack: ffffffc1366cc000
[   12.719740] PC is at addr_in_gen_pool+0x4/0x48
[   12.724253] LR is at __dma_free+0x64/0xbc
[   12.728325] pc : [<ffffff80083c0df8>] lr : [<ffffff80080979e0>] pstate: 60000145
[   12.735825] sp : ffffffc1366cf990
[   12.739196] x29: ffffffc1366cf990 x28: ffffffc1366cc000
[   12.744608] x27: 0000000000000000 x26: ffffffc13a8568c8
[   12.750020] x25: 0000000000000000 x24: ffffff80098f9000
[   12.755433] x23: 000000013a5ff000 x22: ffffff8009c57000
[   12.760844] x21: ffffffc13a856810 x20: 0000000000000000
[   12.766255] x19: 0000000000001000 x18: 000000000000000a
[   12.771667] x17: 0000007f917553e0 x16: 0000000000001002
[   12.777078] x15: 00000000000a36cb x14: ffffff80898feb77
[   12.782490] x13: ffffffffffffffff x12: 0000000000000030
[   12.787899] x11: 00000000fffffffe x10: ffffff80098feb7f
[   12.793311] x9 : 0000000005f5e0ff x8 : 65776f702074736f
[   12.798723] x7 : 6c2062756820746f x6 : ffffff80098febb1
[   12.804134] x5 : ffffff800809797c x4 : 0000000000000000
[   12.809545] x3 : 000000013a5ff000 x2 : 0000000000000fff
[   12.814955] x1 : ffffff8009c57000 x0 : 0000000000000000
[   12.820363]
[   12.821907] Process pml (pid: 1499, stack limit = 0xffffffc1366cc020)
[   12.828421] Stack: (0xffffffc1366cf990 to 0xffffffc1366d0000)
[   12.834240] f980:                                   ffffffc1366cf9e0 ffffff80086004d0
[   12.842186] f9a0: ffffffc13ab08238 0000000000000010 ffffff80097c2218 ffffffc13a856810
[   12.850131] f9c0: ffffff8009c57000 000000013a5ff000 0000000000000008 000000013a5ff000
[   12.858076] f9e0: ffffffc1366cfa50 ffffff80085f9250 ffffffc13ab08238 0000000000000004
[   12.866021] fa00: ffffffc13ab08000 ffffff80097b6000 ffffffc13ab08130 0000000000000001
[   12.873966] fa20: 0000000000000008 ffffffc13a8568c8 0000000000000000 ffffffc1366cc000
[   12.881911] fa40: ffffffc13ab08130 0000000000000001 ffffffc1366cfa90 ffffff80085e3de8
[   12.889856] fa60: ffffffc13ab08238 0000000000000000 ffffffc136b75b00 0000000000000000
[   12.897801] fa80: 0000000000000010 ffffff80089ccb92 ffffffc1366cfac0 ffffff80084ad040
[   12.905746] faa0: ffffffc13a856810 0000000000000000 ffffff80084ad004 ffffff80084b91a8
[   12.913691] fac0: ffffffc1366cfae0 ffffff80084b91b4 ffffffc13a856810 ffffff80080db5cc
[   12.921636] fae0: ffffffc1366cfb20 ffffff80084b96bc ffffffc13a856810 0000000000000010
[   12.929581] fb00: ffffffc13a856870 0000000000000000 ffffffc13a856810 ffffff800984d2b8
[   12.937526] fb20: ffffffc1366cfb50 ffffff80084baa70 ffffff8009932ad0 ffffff800984d260
[   12.945471] fb40: 0000000000000010 00000002eff0a065 ffffffc1366cfbb0 ffffff80084bafbc
[   12.953415] fb60: 0000000000000010 0000000000000003 ffffff80098fe000 0000000000000000
[   12.961360] fb80: ffffff80097b6000 ffffff80097b6dc8 ffffff80098c12b8 ffffff80098c12f8
[   12.969306] fba0: ffffff8008842000 ffffff80097b6dc8 ffffffc1366cfbd0 ffffff80080e0d88
[   12.977251] fbc0: 00000000fffffffb ffffff80080e10bc ffffffc1366cfc60 ffffff80080e16a8
[   12.985196] fbe0: 0000000000000000 0000000000000003 ffffff80097b6000 ffffff80098fe9f0
[   12.993140] fc00: ffffff80097d4000 ffffff8008983802 0000000000000123 0000000000000040
[   13.001085] fc20: ffffff8008842000 ffffffc1366cc000 ffffff80089803c2 00000000ffffffff
[   13.009029] fc40: 0000000000000000 0000000000000000 ffffffc1366cfc60 0000000000040987
[   13.016974] fc60: ffffffc1366cfcc0 ffffff80080dfd08 0000000000000003 0000000000000004
[   13.024919] fc80: 0000000000000003 ffffff80098fea08 ffffffc136577ec0 ffffff80089803c2
[   13.032864] fca0: 0000000000000123 0000000000000001 0000000500000002 0000000000040987
[   13.040809] fcc0: ffffffc1366cfd00 ffffff80083a89d4 0000000000000004 ffffffc136577ec0
[   13.048754] fce0: ffffffc136610cc0 ffffffffffffffea ffffffc1366cfeb0 ffffffc136610cd8
[   13.056700] fd00: ffffffc1366cfd10 ffffff800822a614 ffffffc1366cfd40 ffffff80082295d4
[   13.064645] fd20: 0000000000000004 ffffffc136577ec0 ffffffc136610cc0 0000000021670570
[   13.072590] fd40: ffffffc1366cfd80 ffffff80081b5d10 ffffff80097b6000 ffffffc13aae4200
[   13.080536] fd60: ffffffc1366cfeb0 0000000000000004 0000000021670570 0000000000000004
[   13.088481] fd80: ffffffc1366cfe30 ffffff80081b6b20 ffffffc13aae4200 0000000000000000
[   13.096427] fda0: 0000000000000004 0000000021670570 ffffffc1366cfeb0 ffffffc13a838200
[   13.104371] fdc0: 0000000000000000 000000000000000a ffffff80097b6000 0000000000040987
[   13.112316] fde0: ffffffc1366cfe20 ffffff80081b3af0 ffffffc13a838200 0000000000000000
[   13.120261] fe00: ffffffc1366cfe30 ffffff80081b6b0c ffffffc13aae4200 0000000000000000
[   13.128206] fe20: 0000000000000004 0000000000040987 ffffffc1366cfe70 ffffff80081b7dd8
[   13.136151] fe40: ffffff80097b6000 ffffffc13aae4200 ffffffc13aae4200 fffffffffffffff7
[   13.144096] fe60: 0000000021670570 ffffffc13a8c63c0 0000000000000000 ffffff8008083180
[   13.152042] fe80: ffffffffffffff1d 0000000021670570 ffffffffffffffff 0000007f917ad9b8
[   13.159986] fea0: 0000000020000000 0000000000000015 0000000000000000 0000000000040987
[   13.167930] fec0: 0000000000000001 0000000021670570 0000000000000004 0000000000000000
[   13.175874] fee0: 0000000000000888 0000440110000000 000000000000006d 0000000000000003
[   13.183819] ff00: 0000000000000040 ffffff80ffffffc8 0000000000000000 0000000000000020
[   13.191762] ff20: 0000000000000000 0000000000000000 0000000000000001 0000000000000000
[   13.199707] ff40: 0000000000000000 0000007f917553e0 0000000000000000 0000000000000004
[   13.207651] ff60: 0000000021670570 0000007f91835480 0000000000000004 0000007f91831638
[   13.215595] ff80: 0000000000000004 00000000004b0de0 00000000004b0000 0000000000000000
[   13.223539] ffa0: 0000000000000000 0000007fc92ac8c0 0000007f9175d178 0000007fc92ac8c0
[   13.231483] ffc0: 0000007f917ad9b8 0000000020000000 0000000000000001 0000000000000040
[   13.239427] ffe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[   13.247360] Call trace:
[   13.249866] Exception stack(0xffffffc1366cf7a0 to 0xffffffc1366cf8d0)
[   13.256386] f7a0: 0000000000001000 0000007fffffffff ffffffc1366cf990 ffffff80083c0df8
[   13.264331] f7c0: 0000000060000145 ffffff80089b5001 ffffffc13ab08130 0000000000000001
[   13.272275] f7e0: 0000000000000008 ffffffc13a8568c8 0000000000000000 0000000000000000
[   13.280220] f800: ffffffc1366cf960 ffffffc1366cf960 ffffffc1366cf930 00000000ffffffd8
[   13.288165] f820: ffffff8009931ac0 4554535953425553 4544006273753d4d 3831633d45434956
[   13.296110] f840: ffff003832313a39 ffffff800845926c ffffffc1366cf880 0000000000040987
[   13.304054] f860: 0000000000000000 ffffff8009c57000 0000000000000fff 000000013a5ff000
[   13.311999] f880: 0000000000000000 ffffff800809797c ffffff80098febb1 6c2062756820746f
[   13.319944] f8a0: 65776f702074736f 0000000005f5e0ff ffffff80098feb7f 00000000fffffffe
[   13.327884] f8c0: 0000000000000030 ffffffffffffffff
[   13.332835] [<ffffff80083c0df8>] addr_in_gen_pool+0x4/0x48
[   13.338398] [<ffffff80086004d0>] xhci_mem_cleanup+0xc8/0x51c
[   13.344137] [<ffffff80085f9250>] xhci_resume+0x308/0x65c
[   13.349524] [<ffffff80085e3de8>] xhci_brcm_resume+0x84/0x8c
[   13.355174] [<ffffff80084ad040>] platform_pm_resume+0x3c/0x64
[   13.360997] [<ffffff80084b91b4>] dpm_run_callback+0x5c/0x15c
[   13.366732] [<ffffff80084b96bc>] device_resume+0xc0/0x190
[   13.372205] [<ffffff80084baa70>] dpm_resume+0x144/0x2cc
[   13.377504] [<ffffff80084bafbc>] dpm_resume_end+0x20/0x34
[   13.382980] [<ffffff80080e0d88>] suspend_devices_and_enter+0x104/0x704
[   13.389585] [<ffffff80080e16a8>] pm_suspend+0x320/0x53c
[   13.394881] [<ffffff80080dfd08>] state_store+0xbc/0xe0
[   13.400094] [<ffffff80083a89d4>] kobj_attr_store+0x14/0x24
[   13.405655] [<ffffff800822a614>] sysfs_kf_write+0x60/0x70
[   13.411128] [<ffffff80082295d4>] kernfs_fop_write+0x130/0x194
[   13.416954] [<ffffff80081b5d10>] __vfs_write+0x60/0x150
[   13.422254] [<ffffff80081b6b20>] vfs_write+0xc8/0x164
[   13.427376] [<ffffff80081b7dd8>] SyS_write+0x70/0xc8
[   13.432412] [<ffffff8008083180>] el0_svc_naked+0x34/0x38
[   13.437800] Code: 92800173 97f6fb9e 17fffff5 d1000442 (f8408c03)
[   13.444033] ---[ end trace 2effe12f909ce205 ]---

The call path leading to this problem is xhci_mem_cleanup() ->
dma_free_coherent() -> dma_free_from_pool() -> addr_in_gen_pool. If the
atomic_pool is NULL, we can't possibly have the address in the atomic
pool anyway, so guard against that.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-06-14 14:30:21 +02:00
Florian Fainelli 4aa095ea32 swiotlb: Return consistent SWIOTLB segments/nr_tbl
With a specifically contrived memory layout where there is no physical
memory available to the kernel below the 4GB boundary, we will fail to
perform the initial swiotlb_init() call and set no_iotlb_memory to true.

There are drivers out there that call into swiotlb_nr_tbl() to determine
whether they can use the SWIOTLB. With the right DMA_BIT_MASK() value
for these drivers (say 64-bit), they won't ever need to hit
swiotlb_tbl_map_single() so this can go unoticed and we would be
possibly lying about those drivers.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2019-06-11 14:36:33 -04:00
Florian Fainelli 0bfaffbf4c swiotlb: Group identical cleanup in swiotlb_cleanup()
Avoid repeating the zeroing of global swiotlb variables in two locations
and introduce swiotlb_cleanup() to do that.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2019-06-11 14:36:33 -04:00
Thomas Gleixner 4505153954 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 333
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation this program is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details you should have received a copy of the gnu general
  public license along with this program if not write to the free
  software foundation inc 59 temple place suite 330 boston ma 02111
  1307 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 136 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000436.384967451@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:37:06 +02:00
Christoph Hellwig c30700db9e dma-direct: provide generic support for uncached kernel segments
A few architectures support uncached kernel segments.  In that case we get
an uncached mapping for a given physica address by using an offset in the
uncached segement.  Implement support for this scheme in the generic
dma-direct code instead of duplicating it in arch hooks.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-06-03 16:00:08 +02:00
Nicolin Chen bd2e75633c dma-contiguous: use fallback alloc_pages for single pages
The addresses within a single page are always contiguous, so it's
not so necessary to always allocate one single page from CMA area.
Since the CMA area has a limited predefined size of space, it may
run out of space in heavy use cases, where there might be quite a
lot CMA pages being allocated for single pages.

However, there is also a concern that a device might care where a
page comes from -- it might expect the page from CMA area and act
differently if the page doesn't.

This patch tries to use the fallback alloc_pages path, instead of
one-page size allocations from the global CMA area in case that a
device does not have its own CMA area. This'd save resources from
the CMA global area for more CMA allocations, and also reduce CMA
fragmentations resulted from trivial allocations.

Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Tested-by: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-06-03 16:00:07 +02:00
Nicolin Chen b1d2dc009d dma-contiguous: add dma_{alloc,free}_contiguous() helpers
Both dma_alloc_from_contiguous() and dma_release_from_contiguous() are
very simply implemented, but requiring callers to pass certain
parameters like count and align, and taking a boolean parameter to check
__GFP_NOWARN in the allocation flags. So every function call duplicates
similar work:

	unsigned long order = get_order(size);
	size_t count = size >> PAGE_SHIFT;

	page = dma_alloc_from_contiguous(dev, count, order,
			gfp & __GFP_NOWARN);

	[...]

	dma_release_from_contiguous(dev, page, size >> PAGE_SHIFT);

Additionally, as CMA can be used only in the context which permits
sleeping, most of callers do a gfpflags_allow_blocking() check and a
corresponding fallback allocation of normal pages upon any false result:

	if (gfpflags_allow_blocking(flag))
		page = dma_alloc_from_contiguous();
	if (!page)
		page = alloc_pages();

	[...]

	if (!dma_release_from_contiguous(dev, page, count))
		__free_pages(page, get_order(size));

So this patch simplifies those function calls by abstracting these
operations into the two new functions: dma_{alloc,free}_contiguous.

As some callers of dma_{alloc,release}_from_contiguous() might be
complicated, this patch just implements these two new functions to
kernel/dma/direct.c only as an initial step.

Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Tested-by: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-06-03 16:00:07 +02:00
Thomas Gleixner ec8f24b7fa treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:46 +02:00
Thomas Gleixner 457c899653 treewide: Add SPDX license identifier for missed files
Add SPDX license identifiers to all files which:

 - Have no license information of any form

 - Have EXPORT_.*_SYMBOL_GPL inside which was used in the
   initial scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:45 +02:00