Zach reported a problem that if inline data is enabled, we don't
tell the difference between the offset of '.' and '..'. And a
getdents will fail if the user only want to get '.' and what's worse,
if there is a conversion happens when the user calls getdents
many times, he/she may get the same entry twice.
In theory, a dir block would also fail if it is converted to a
hashed-index based dir since f_pos will become a hash value, not the
real one, but it doesn't happen. And a deep investigation shows that
we uses a hash based solution even for a normal dir if the dir_index
feature is enabled.
So this patch just adds a new htree_inlinedir_to_tree for inline dir,
and if we find that the hash index is supported, we will do like what
we do for a dir block.
Reported-by: Zach Brown <zab@redhat.com>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Change writeback path to create just one io_end structure for the
extent to which we submit IO and share it among bios writing that
extent. This prevents needless splitting and joining of unwritten
extents when they cannot be submitted as a single bio.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
So far ext4_bio_write_page() attached all the pages to ext4_io_end
structure. This makes that structure pretty heavy (1 KB for pointers
+ 16 bytes per page attached to the bio). Also later we would like to
share ext4_io_end structure among several bios in case IO to a single
extent needs to be split among several bios and pointing to pages from
ext4_io_end makes this complex.
We remove page pointers from ext4_io_end and use pointers from bio
itself instead. This isn't as easy when blocksize < pagesize because
then we can have several bios in flight for a single page and we have
to be careful when to call end_page_writeback(). However this is a
known problem already solved by block_write_full_page() /
end_buffer_async_write() so we mimic its behavior here. We mark
buffers going to disk with BH_Async_Write flag and in
ext4_bio_end_io() we check whether there are any buffers with
BH_Async_Write flag left. If there are not, we can call
end_page_writeback().
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Move ext4_ind_migrate() into migrate.c file since it makes much more
sense and ext4_ext_migrate() is there as well.
Also fix tiny style problem - add spaces around "=" in "i=0".
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently in ENOSPC condition when writing into unwritten space, or
punching a hole, we might need to split the extent and grow extent tree.
However since we can not allocate any new metadata blocks we'll have to
zero out unwritten part of extent or punched out part of extent, or in
the worst case return ENOSPC even though use actually does not allocate
any space.
Also in delalloc path we do reserve metadata and data blocks for the
time we're going to write out, however metadata block reservation is
very tricky especially since we expect that logical connectivity implies
physical connectivity, however that might not be the case and hence we
might end up allocating more metadata blocks than previously reserved.
So in future, metadata reservation checks should be removed since we can
not assure that we do not under reserve.
And this is where reserved space comes into the picture. When mounting
the file system we slice off a little bit of the file system space (2%
or 4096 clusters, whichever is smaller) which can be then used for the
cases mentioned above to prevent costly zeroout, or unexpected ENOSPC.
The number of reserved clusters can be set via sysfs, however it can
never be bigger than number of free clusters in the file system.
Note that this patch fixes the failure of xfstest 274 as expected.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Add a new ioctl, EXT4_IOC_SWAP_BOOT which swaps i_blocks and
associated attributes (like i_blocks, i_size, i_flags, ...) from the
specified inode with inode EXT4_BOOT_LOADER_INO (#5). This is
typically used to store a boot loader in a secure part of the
filesystem, where it can't be changed by a normal user by accident.
The data blocks of the previous boot loader will be associated with
the given inode.
This usercode program is a simple example of the usage:
int main(int argc, char *argv[])
{
int fd;
int err;
if ( argc != 2 ) {
printf("usage: ext4-swap-boot-inode FILE-TO-SWAP\n");
exit(1);
}
fd = open(argv[1], O_WRONLY);
if ( fd < 0 ) {
perror("open");
exit(1);
}
err = ioctl(fd, EXT4_IOC_SWAP_BOOT);
if ( err < 0 ) {
perror("ioctl");
exit(1);
}
close(fd);
exit(0);
}
[ Modified by Theodore Ts'o to fix a number of bugs in the original code.]
Signed-off-by: Dr. Tilmann Bubeck <t.bubeck@reinform.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently on many places in ext4 we're using
ext4_get_group_no_and_offset() even though we're only interested in
knowing the block group of the particular block, not the offset within
the block group so we can use more efficient way to compute block
group.
This patch introduces ext4_get_group_number() which computes block
group for a given block much more efficiently. Use this function
instead of ext4_get_group_no_and_offset() everywhere where we're only
interested in knowing the block group.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently in when getting the block group number for a particular
block in ext4_block_in_group() we're using
ext4_get_group_no_and_offset() which uses do_div() to get the block
group and the remainer which is offset within the group.
We don't need all of that in ext4_block_in_group() as we only need to
figure out the group number.
This commit changes ext4_block_in_group() to calculate group number
directly. This shows as a big improvement with regards to cpu
utilization. Measuring fallocate -l 15T on fresh file system with perf
showed that 23% of cpu time was spend in the
ext4_get_group_no_and_offset(). With this change it completely
disappears from the list only bumping the occurrence of
ext4_init_block_bitmap() which is the biggest user of
ext4_block_in_group() by 4%. As the result of this change on my system
the fallocate call was approx. 10% faster.
However since there is '-g' option in mkfs which allow us setting
different groups size (mostly for developers) I've introduced new per
file system flag whether we have a standard block group size or
not. The flag is used to determine whether we can use the bit shift
optimization or not.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In order to make it simpler to test the code which support
i_blocks/indirect-mapped inodes, support the conversion of inodes
which are less than 12 blocks and which are contained in no more than
a single extent.
The primary intended use of this code is to converting freshly created
zero-length files and empty directories.
Note that the version of chattr in e2fsprogs 1.42.7 and earlier has a
check that prevents the clearing of the extent flag. A simple patch
which allows "chattr -e <file>" to work will be checked into the
e2fsprogs git repository.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Move common code in ext4_ind_truncate() and ext4_ext_truncate() into
ext4_truncate(). This saves over 60 lines of code.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Move common code in ext4_ind_punch_hole() and ext4_ext_punch_hole()
into ext4_punch_hole(). This saves over 150 lines of code.
This also fixes a potential bug when the punch_hole() code is racing
against indirect-to-extents or extents-to-indirect migation. We are
currently using i_mutex to protect against changes to the inode flag;
specifically, the append-only, immutable, and extents inode flags. So
we need to take i_mutex before deciding whether to use the
extents-specific or indirect-specific punch_hole code.
Also, there was a missing call to ext4_inode_block_unlocked_dio() in
the indirect punch codepath. This was added in commit 02d262dffc
to block DIO readers racing against the punch operation in the
codepath for extent-mapped inodes, but it was missing for
indirect-block mapped inodes. One of the advantages of refactoring
the code is that it makes such oversights much less likely.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The only difference between how we handle data=ordered and
data=writeback is a single call to ext4_jbd2_file_inode(). Eliminate
code duplication by factoring out redundant the code paths.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Commit 84c17543ab (ext4: move work from io_end to inode) triggered a
regression when running xfstest #270 when the file system is mounted
with dioread_nolock.
The problem is that after ext4_evict_inode() calls ext4_ioend_wait(),
this guarantees that last io_end structure has been freed, but it does
not guarantee that the workqueue structure, which was moved into the
inode by commit 84c17543ab, is actually finished. Once
ext4_flush_completed_IO() calls ext4_free_io_end() on CPU #1, this
will allow ext4_ioend_wait() to return on CPU #2, at which point the
evict_inode() codepath can race against the workqueue code on CPU #1
accessing EXT4_I(inode)->i_unwritten_work to find the next item of
work to do.
Fix this by calling cancel_work_sync() in ext4_ioend_wait(), which
will be renamed ext4_ioend_shutdown(), since it is only used by
ext4_evict_inode(). Also, move the call to ext4_ioend_shutdown()
until after truncate_inode_pages() and filemap_write_and_wait() are
called, to make sure all dirty pages have been written back and
flushed from the page cache first.
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<c01dda6a>] cwq_activate_delayed_work+0x3b/0x7e
*pdpt = 0000000030bc3001 *pde = 0000000000000000
Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
Modules linked in:
Pid: 6, comm: kworker/u:0 Not tainted 3.8.0-rc3-00013-g84c1754-dirty #91 Bochs Bochs
EIP: 0060:[<c01dda6a>] EFLAGS: 00010046 CPU: 0
EIP is at cwq_activate_delayed_work+0x3b/0x7e
EAX: 00000000 EBX: 00000000 ECX: f505fe54 EDX: 00000000
ESI: ed5b697c EDI: 00000006 EBP: f64b7e8c ESP: f64b7e84
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
CR0: 8005003b CR2: 00000000 CR3: 30bc2000 CR4: 000006f0
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
Process kworker/u:0 (pid: 6, ti=f64b6000 task=f64b4160 task.ti=f64b6000)
Stack:
f505fe00 00000006 f64b7e9c c01de3d7 f6435540 00000003 f64b7efc c01def1d
f6435540 00000002 00000000 0000008a c16d0808 c040a10b c16d07d8 c16d08b0
f505fe00 c16d0780 00000000 00000000 ee153df4 c1ce4a30 c17d0e30 00000000
Call Trace:
[<c01de3d7>] cwq_dec_nr_in_flight+0x71/0xfb
[<c01def1d>] process_one_work+0x5d8/0x637
[<c040a10b>] ? ext4_end_bio+0x300/0x300
[<c01e3105>] worker_thread+0x249/0x3ef
[<c01ea317>] kthread+0xd8/0xeb
[<c01e2ebc>] ? manage_workers+0x4bb/0x4bb
[<c023a370>] ? trace_hardirqs_on+0x27/0x37
[<c0f1b4b7>] ret_from_kernel_thread+0x1b/0x28
[<c01ea23f>] ? __init_kthread_worker+0x71/0x71
Code: 01 83 15 ac ff 6c c1 00 31 db 89 c6 8b 00 a8 04 74 12 89 c3 30 db 83 05 b0 ff 6c c1 01 83 15 b4 ff 6c c1 00 89 f0 e8 42 ff ff ff <8b> 13 89 f0 83 05 b8 ff 6c c1
6c c1 00 31 c9 83
EIP: [<c01dda6a>] cwq_activate_delayed_work+0x3b/0x7e SS:ESP 0068:f64b7e84
CR2: 0000000000000000
---[ end trace a1923229da53d8a4 ]---
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jan Kara <jack@suse.cz>
A user who was using a 8TB+ file system and with a very large flexbg
size (> 65536) could cause the atomic_t used in the struct flex_groups
to overflow. This was detected by PaX security patchset:
http://forums.grsecurity.net/viewtopic.php?f=3&t=3289&p=12551#p12551
This bug was introduced in commit 9f24e4208f, so it's been around
since 2.6.30. :-(
Fix this by using an atomic64_t for struct orlav_stats's
free_clusters.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Cc: stable@vger.kernel.org
Use a percpu counter rather than atomic types for shrinker accounting.
There's no need for ultimate accuracy in the shrinker, so this
should come a little more cheaply. The percpu struct is somewhat
large, but there was a big gap before the cache-aligned
s_es_lru_lock anyway, and it fits nicely in there.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When the system is under memory pressure, ext4_es_srhink() will get
called very often. So optimize returning the number of items in the
file system's extent status cache by keeping a per-filesystem count,
instead of calculating it each time by scanning all of the inodes in
the extent status cache.
Also rename the slab used for the extent status cache to be
"ext4_extent_status" so it's obviousl the slab in question is created
by ext4.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Zheng Liu <gnehzuil.liu@gmail.com>
Although extent status is loaded on-demand, we also need to reclaim
extent from the tree when we are under a heavy memory pressure because
in some cases fragmented extent tree causes status tree costs too much
memory.
Here we maintain a lru list in super_block. When the extent status of
an inode is accessed and changed, this inode will be move to the tail
of the list. The inode will be dropped from this list when it is
cleared. In the inode, a counter is added to count the number of
cached objects in extent status tree. Here only written/unwritten/hole
extent is counted because delayed extent doesn't be reclaimed due to
fiemap, bigalloc and seek_data/hole need it. The counter will be
increased as a new extent is allocated, and it will be decreased as a
extent is freed.
In this commit we use normal shrinker framework to reclaim memory from
the status tree. ext4_es_reclaim_extents_count() traverses the lru list
to count the number of reclaimable extents. ext4_es_shrink() tries to
reclaim written/unwritten/hole extents from extent status tree. The
inode that has been shrunk is moved to the tail of lru list.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jan kara <jack@suse.cz>
Single extent cache could be removed because we have extent status tree
as a extent cache, and it would be better.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jan kara <jack@suse.cz>
After tracking all extent status, we already have a extent cache in
memory. Every time we want to lookup a block mapping, we can first
try to lookup it in extent status tree to avoid a potential disk I/O.
A new function called ext4_es_lookup_extent is defined to finish this
work. When we try to lookup a block mapping, we always call
ext4_map_blocks and/or ext4_da_map_blocks. So in these functions we
first try to lookup a block mapping in extent status tree.
A new flag EXT4_GET_BLOCKS_NO_PUT_HOLE is used in ext4_da_map_blocks
in order not to put a hole into extent status tree because this hole
will be converted to delayed extent in the tree immediately.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jan kara <jack@suse.cz>
By recording the phycisal block and status, extent status tree is able
to track the status of every extents. When we call _map_blocks
functions to lookup an extent or create a new written/unwritten/delayed
extent, this extent will be inserted into extent status tree.
We don't load all extents from disk in alloc_inode() because it costs
too much memory, and if a file is opened and closed frequently it will
takes too much time to load all extent information. So currently when
we create/lookup an extent, this extent will be inserted into extent
status tree. Hence, the extent status tree may not comprehensively
contain all of the extents found in the file.
Here a condition we need to take care is that an extent might contains
unwritten and delayed status simultaneously because an extent is delayed
allocated and could be allocated by fallocate. At this time we need to
keep delayed status because later we need to update delayed reservation
space using it.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jan kara <jack@suse.cz>
In ext4_{create,mknod,mkdir,symlink}(), don't start the journal handle
until the inode has been succesfully allocated. In order to do this,
we need to start the handle in the ext4_new_inode(). So create a new
variant of this function, ext4_new_inode_start_handle(), so the handle
can be created at the last possible minute, before we need to modify
the inode allocation bitmap block.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Operations which modify extended attributes may need extra journal
credits if inline data is used, since there is a chance that some
extended attributes may need to get pushed to an external attribute
block.
Changes to reflect this was made in xattr.c, but they were missed in
fs/ext4/acl.c. To fix this, abstract the calculation of the number of
credits needed for xattr operations to an inline function defined in
ext4_jbd2.h, and use it in acl.c and xattr.c.
Also move the function declarations used in inline.c from xattr.h
(where they are non-obviously hidden, and caused problems since
ext4_jbd2.h needs to use the function ext4_has_inline_data), and move
them to ext4.h.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Tao Ma <boyu.mt@taobao.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Move the jbd2 wrapper functions which start and stop handles out of
super.c, where they don't really logically belong, and into
ext4_jbd2.c.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
It does not make much sense to have struct work in ext4_io_end_t
because we always use it for only one ext4_io_end_t per inode (the
first one in the i_completed_io list). So just move the structure to
inode itself. This also allows for a small simplification in
processing io_end structures.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently we sometimes used block_write_full_page() and sometimes
ext4_bio_write_page() for writeback (depending on mount options and call
path). Let's always use ext4_bio_write_page() to simplify things a bit.
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch add supports for indirect file support punching hole. It
is almost the same as ext4_ext_punch_hole. First, we invalidate all
pages between this hole, and then we try to deallocate all blocks of
this hole.
A recursive function is used to handle deallocation of blocks. In
this function, it iterates over the entries in inode's i_blocks or
indirect blocks, and try to free the block for each one of them.
After applying this patch, xfstest #255 will not pass w/o extent because
indirect-based file doesn't support unwritten extents.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
After we have finished extending the file system, we need to trigger a
the lazy inode table thread to zero out the inode tables.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
inline data, which allows small files or directories to be stored in
the in-inode extended attribute area. (This requires that the file
system use inodes which are at least 256 bytes or larger; 128 byte
inodes do not have any room for in-inode xattrs.)
The second new feature is SEEK_HOLE/SEEK_DATA support. This is
enabled by the extent status tree patches, and this infrastructure
will be used to further optimize ext4 in the future.
Beyond that, we have the usual collection of code cleanups and bug
fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=aNOf
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 update from Ted Ts'o:
"There are two major features for this merge window. The first is
inline data, which allows small files or directories to be stored in
the in-inode extended attribute area. (This requires that the file
system use inodes which are at least 256 bytes or larger; 128 byte
inodes do not have any room for in-inode xattrs.)
The second new feature is SEEK_HOLE/SEEK_DATA support. This is
enabled by the extent status tree patches, and this infrastructure
will be used to further optimize ext4 in the future.
Beyond that, we have the usual collection of code cleanups and bug
fixes."
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (63 commits)
ext4: zero out inline data using memset() instead of empty_zero_page
ext4: ensure Inode flags consistency are checked at build time
ext4: Remove CONFIG_EXT4_FS_XATTR
ext4: remove unused variable from ext4_ext_in_cache()
ext4: remove redundant initialization in ext4_fill_super()
ext4: remove redundant code in ext4_alloc_inode()
ext4: use sync_inode_metadata() when syncing inode metadata
ext4: enable ext4 inline support
ext4: let fallocate handle inline data correctly
ext4: let ext4_truncate handle inline data correctly
ext4: evict inline data out if we need to strore xattr in inode
ext4: let fiemap work with inline data
ext4: let ext4_rename handle inline dir
ext4: let empty_dir handle inline dir
ext4: let ext4_delete_entry() handle inline data
ext4: make ext4_delete_entry generic
ext4: let ext4_find_entry handle inline data
ext4: create a new function search_dir
ext4: let ext4_readdir handle inline data
ext4: let add_dir_entry handle inline data properly
...
Flags being used by atomic operations in inode flags (e.g.
ext4_test_inode_flag(), should be consistent with that actually stored
in inodes, i.e.: EXT4_XXX_FL.
It ensures that this consistency is checked at build-time, not at
run-time.
Currently, the flags consistency are being checked at run-time, but,
there is no real reason to not do a build-time check instead of a
run-time check. The code is comparing macro defined values with enum
type variables, where both are constants, so, there is no problem in
comparing constants at build-time.
enum variables are treated as constants by the C compiler, according
to the C99 specs (see www.open-std.org/jtc1/sc22/wg14/www/docs/n1124.pdf
sec. 6.2.5, item 16), so, there is no real problem in comparing an
enumeration type at build time
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Ted has sent out a RFC about removing this feature. Eric and Jan
confirmed that both RedHat and SUSE enable this feature in all their
product. David also said that "As far as I know, it's enabled in all
Android kernels that use ext4." So it seems OK for us.
And what's more, as inline data depends its implementation on xattr,
and to be frank, I don't run any test again inline data enabled while
xattr disabled. So I think we should add inline data and remove this
config option in the same release.
[ The savings if you disable CONFIG_EXT4_FS_XATTR is only 27k, which
isn't much in the grand scheme of things. Since no one seems to be
testing this configuration except for some automated compile farms, on
balance we are better removing this config option, and so that it is
effectively always enabled. -- tytso ]
Cc: David Brown <davidb@codeaurora.org>
Cc: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently ext4_delete_entry() is used only for dir entry removing from
a dir block. So let us create a new function
ext4_generic_delete_entry and this function takes a entry_buf and a
buf_size so that it can be used for inline data.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
search_dirblock is used to search a dir block, but the code is almost
the same for searching an inline dir.
So create a new fuction search_dir and let search_dirblock call it.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
For "." and "..", we just call filldir by ourselves
instead of iterating the real dir entry.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch let add_dir_entry handle the inline data case. So the
dir is initialized as inline dir first and then we can try to add
some files to it, when the inline space can't hold all the entries,
a dir block will be created and the dir entry will be moved to it.
Also for an inlined dir, "." and ".." are removed and we only use
4 bytes to store the parent inode number. These 2 entries will be
added when we convert an inline dir to a block-based one.
[ Folded in patch from Dan Carpenter to remove an unused variable. ]
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The old add_dirent_to_buf handles all the work related to the
work of adding dir entry to a dir block. Now we have inline data,
so create 2 new function __ext4_find_dest_de and __ext4_insert_dentry
that do the real work and let add_dirent_to_buf call them.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The __ext4_check_dir_entry() function() is used to check whether the
de is over the block boundary. Now with inline data, it could be
within the block boundary while exceeds the inode size. So check this
function to check the overflow more precisely.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently, the initialization of dot and dotdot are encapsulated in
ext4_mkdir and also bond with dir_block. So create a new function
named ext4_init_new_dir and the initialization is moved to
ext4_init_dot_dotdot. Now it will called either in the normal non-inline
case(rec_len of ".." will cover the whole block) or when we converting an
inline dir to a block(rec len of ".." will be the real length). The start
of the next entry is also returned for inline dir usage.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
For delayed allocation mode, we write to inline data if the file
is small enough. And in case of we write to some offset larger
than the inline size, the 1st page is dirtied, so that
ext4_da_writepages can handle the conversion. When the 1st page
is initialized with blocks, the inline part is removed.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
For a normal write case (not journalled write, not delayed
allocation), we write to the inline if the file is small and convert
it to an extent based file when the write is larger than the max
inline size.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Implement inline data with xattr.
Now we use "system.data" to store xattr, and the xattr will
be extended if the i_size is increased while we don't release
the space during truncate.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Previously, ext4_extents.h was being included at the end of ext4.h,
which was bad for a number of reasons: (a) it was not being included
in the expected place, and (b) it caused the header to be included
multiple times. There were #ifdef's to prevent this from causing any
problems, but it still was unnecessary.
By moving the function declarations that were in ext4_extents.h to
ext4.h, which is standard practice for where the function declarations
for the rest of ext4.h can be found, we can remove ext4_extents.h from
being included in ext4.h at all, and then we can only include
ext4_extents.h where it is needed in ext4's source files.
It should be possible to move a few more things into ext4.h, and
further reduce the number of source files that need to #include
ext4_extents.h, but that's a cleanup for another day.
Reported-by: Sachin Kamat <sachin.kamat@linaro.org>
Reported-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
"Whether" is misspelled in various comments across the tree; this
fixes them. No code changes.
Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds two structures that supports extent status tree, extent_status
and ext4_es_tree. Currently extent_status is used to track a delay extent for
an inode, which record the start block and the length of the delay extent.
ext4_es_tree is used to store all extent_status for an inode in memory.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: Allison Henderson <achender@linux.vnet.ibm.com>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In mke2fs, we only checksum the whole bitmap block and it is right.
While in the kernel, we use EXT4_BLOCKS_PER_GROUP to indicate the
size of the checksumed bitmap which is wrong when we enable bigalloc.
The right size should be EXT4_CLUSTERS_PER_GROUP and this patch fixes
it.
Also as every caller of ext4_block_bitmap_csum_set and
ext4_block_bitmap_csum_verify pass in EXT4_BLOCKS_PER_GROUP(sb)/8,
we'd better removes this parameter and sets it in the function itself.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Cc: stable@vger.kernel.org
The function ext4_handle_dirty_super() was calculating the superblock
on the wrong block data. As a result, when the superblock is modified
while it is mounted (most commonly, when inodes are added or removed
from the orphan list), the superblock checksum would be wrong. We
didn't notice because the superblock *was* being correctly calculated
in ext4_commit_super(), and this would get called when the file system
was unmounted. So the problem only became obvious if the system
crashed while the file system was mounted.
Fix this by removing the poorly designed function signature for
ext4_superblock_csum_set(); if it only took a single argument, the
pointer to a struct superblock, the ambiguity which caused this
mistake would have been impossible.
Reported-by: George Spelvin <linux@horizon.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
BUG #1) All places where we call ext4_flush_completed_IO are broken
because buffered io and DIO/AIO goes through three stages
1) submitted io,
2) completed io (in i_completed_io_list) conversion pended
3) finished io (conversion done)
And by calling ext4_flush_completed_IO we will flush only
requests which were in (2) stage, which is wrong because:
1) punch_hole and truncate _must_ wait for all outstanding unwritten io
regardless to it's state.
2) fsync and nolock_dio_read should also wait because there is
a time window between end_page_writeback() and ext4_add_complete_io()
As result integrity fsync is broken in case of buffered write
to fallocated region:
fsync blkdev_completion
->filemap_write_and_wait_range
->ext4_end_bio
->end_page_writeback
<-- filemap_write_and_wait_range return
->ext4_flush_completed_IO
sees empty i_completed_io_list but pended
conversion still exist
->ext4_add_complete_io
BUG #2) Race window becomes wider due to the 'ext4: completed_io
locking cleanup V4' patch series
This patch make following changes:
1) ext4_flush_completed_io() now first try to flush completed io and when
wait for any outstanding unwritten io via ext4_unwritten_wait()
2) Rename function to more appropriate name.
3) Assert that all callers of ext4_flush_unwritten_io should hold i_mutex to
prevent endless wait
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Inode's block defrag and ext4_change_inode_journal_flag() may
affect nonlocked DIO reads result, so proper synchronization
required.
- Add missed inode_dio_wait() calls where appropriate
- Check inode state under extra i_dio_count reference.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Current unwritten extent conversion state-machine is very fuzzy.
- For unknown reason it performs conversion under i_mutex. What for?
My diagnosis:
We already protect extent tree with i_data_sem, truncate and punch_hole
should wait for DIO, so the only data we have to protect is end_io->flags
modification, but only flush_completed_IO and end_io_work modified this
flags and we can serialize them via i_completed_io_lock.
Currently all these games with mutex_trylock result in the following deadlock
truncate: kworker:
ext4_setattr ext4_end_io_work
mutex_lock(i_mutex)
inode_dio_wait(inode) ->BLOCK
DEADLOCK<- mutex_trylock()
inode_dio_done()
#TEST_CASE1_BEGIN
MNT=/mnt_scrach
unlink $MNT/file
fallocate -l $((1024*1024*1024)) $MNT/file
aio-stress -I 100000 -O -s 100m -n -t 1 -c 10 -o 2 -o 3 $MNT/file
sleep 2
truncate -s 0 $MNT/file
#TEST_CASE1_END
Or use 286's xfstests https://github.com/dmonakhov/xfstests/blob/devel/286
This patch makes state machine simple and clean:
(1) xxx_end_io schedule final extent conversion simply by calling
ext4_add_complete_io(), which append it to ei->i_completed_io_list
NOTE1: because of (2A) work should be queued only if
->i_completed_io_list was empty, otherwise the work is scheduled already.
(2) ext4_flush_completed_IO is responsible for handling all pending
end_io from ei->i_completed_io_list
Flushing sequence consists of following stages:
A) LOCKED: Atomically drain completed_io_list to local_list
B) Perform extents conversion
C) LOCKED: move converted io's to to_free list for final deletion
This logic depends on context which we was called from.
D) Final end_io context destruction
NOTE1: i_mutex is no longer required because end_io->flags modification
is protected by ei->ext4_complete_io_lock
Full list of changes:
- Move all completion end_io related routines to page-io.c in order to improve
logic locality
- Move open coded logic from various xx_end_xx routines to ext4_add_complete_io()
- remove EXT4_IO_END_FSYNC
- Improve SMP scalability by removing useless i_mutex which does not
protect io->flags anymore.
- Reduce lock contention on i_completed_io_lock by optimizing list walk.
- Rename ext4_end_io_nolock to end4_end_io and make it static
- Check flush completion status to ext4_ext_punch_hole(). Because it is
not good idea to punch blocks from corrupted inode.
Changes since V3 (in request to Jan's comments):
Fall back to active flush_completed_IO() approach in order to prevent
performance issues with nolocked DIO reads.
Changes since V2:
Fix use-after-free caused by race truncate vs end_io_work
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Tao Ma