Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, perf record is broken on arm/arm64 systems when the PMU is
specified explicitly as part of the event, e.g.
$ ./perf record -e armv8_cortex_a53/cpu_cycles/u true
In such cases, perf record fails to open events unless
perf_event_paranoid is set to -1, even if the PMU in question supports
mode exclusion. Further, even when perf_event_paranoid is toggled, no
samples are recorded.
This is an unintended side effect of commit:
e3ba76deef ("perf tools: Force uncore events to system wide monitoring)
... which assumes that if a PMU has an associated cpu_map, it is an
uncore PMU, and forces events for such PMUs to be system-wide.
This is not true for arm/arm64 systems, which can have heterogeneous
CPUs. To account for this, multiple CPU PMUs are exposed, each with a
"cpus" field under sysfs, which the perf tool parses into a cpu_map. ARM
PMUs do not have a "cpumask" file, and only have a "cpus" file. For the
gory details as to why, see commit:
7e3fcffe95 ("perf pmu: Support alternative sysfs cpumask")
Given all of this, we can instead identify uncore PMUs by explicitly
checking for a "cpumask" file, and restore arm/arm64 PMU support back to
a working state. This patch does so, adding a new perf_pmu::is_uncore
field, and splitting the existing cpumask parsing so that it can be
reused.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by Will Deacon <will.deacon@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: 4.12+ <stable@vger.kernel.org>
Fixes: e3ba76deef ("perf tools: Force uncore events to system wide monitoring)
Link: http://lkml.kernel.org/r/1507315102-5942-1-git-send-email-mark.rutland@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Extract the code to get the per cpu JSON alias into a separate function
for reuse. No behavior changes.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170831194036.30146-6-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To have a more compact way to ask the compiler to perform scanf like
argument validation.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-yzqrhfjrn26lqqtwf55egg0h@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the printing of perf expressions and internal events to a new
clearer --details flag, instead of lumping it together with other debug
options in --debug. This makes it clearer to use.
Before
perf list --debug
...
unc_m_power_critical_throttle_cycles
[Cycles all ranks are in critical thermal throttle. Unit: uncore_imc]
uncore_imc_2/event=0x86/ MetricName: power_critical_throttle_cycles % MetricExpr: (unc_m_power_critical_throttle_cycles / unc_m_clockticks) * 100.
after
perf list --details
...
unc_m_power_critical_throttle_cycles
[Cycles all ranks are in critical thermal throttle. Unit: uncore_imc]
uncore_imc_2/event=0x86/ MetricName: power_critical_throttle_cycles % MetricExpr: (unc_m_power_critical_throttle_cycles / unc_m_clockticks) * 100.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/20170320201711.14142-14-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for a new JSON event attribute to name MetricExpr for better
output in perf stat.
If the event has no MetricName it uses the normal event name instead to
describe the metric.
Before
% perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' --metric-only
time unc_p_freq_max_os_cycles
1.000149775 15.7
2.000344807 19.3
3.000502544 16.7
4.000640656 6.6
5.000779955 9.9
After
% perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' --metric-only
time freq_max_os_cycles %
1.000149775 15.7
2.000344807 19.3
3.000502544 16.7
4.000640656 6.6
5.000779955 9.9
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170320201711.14142-13-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add generic infrastructure to perf stat to output ratios for
"MetricExpr" entries in the event lists. Many events are more useful as
ratios than in raw form, typically some count in relation to total
ticks.
Transfer the MetricExpr information from the alias to the evsel.
We mark the events that need to be collected for MetricExpr, and also
link the events using them with a pointer. The code is careful to always
prefer the right event in the same group to minimize multiplexing
errors. At the moment only a single relation is supported.
Then add a rblist to the stat shadow code that remembers stats based on
the cpu and context.
Then finally update and retrieve and print these values similarly to the
existing hardcoded perf metrics. We use the simple expression parser
added earlier to evaluate the expression.
Normally we just output the result without further commentary, but for
--metric-only this would lead to empty columns. So for this case use the
original event as description.
There is no attempt to automatically add the MetricExpr event, if it is
missing, however we suggest it to the user, because the user tool
doesn't have enough information to reliably construct a group that is
guaranteed to schedule. So we leave that to the user.
% perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}'
1.000147889 800,085,181 unc_p_clockticks
1.000147889 93,126,241 unc_p_freq_max_os_cycles # 11.6
2.000448381 800,218,217 unc_p_clockticks
2.000448381 142,516,095 unc_p_freq_max_os_cycles # 17.8
3.000639852 800,243,057 unc_p_clockticks
3.000639852 162,292,689 unc_p_freq_max_os_cycles # 20.3
% perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' --metric-only
# time freq_max_os_cycles %
1.000127077 0.9
2.000301436 0.7
3.000456379 0.0
v2: Change from DivideBy to MetricExpr
v3: Use expr__ prefix. Support more than one other event.
v4: Update description
v5: Only print warning message once for multiple PMUs.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170320201711.14142-11-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for parsing the MetricExpr header in the JSON event lists
and storing them in the alias structure.
Used in the next patch.
v2: Change DividedBy to MetricExpr
v3: Really catch all uses of DividedBy
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170320201711.14142-10-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For debugging and testing it is useful to see the converted alias
string. Add support to perf stat/record and perf list to print the alias
conversion. The text string is saved in the alias structure. For perf
stat/record it is folded into the normal -v. For perf list -v was taken,
so we use --debug.
Before:
% perf list
...
cache:
l1d.replacement
[L1D data line replacements]
l1d_pend_miss.fb_full
[Cycles a demand request was blocked due to Fill Buffers inavailability]
After
% perf list --debug
...
cache:
l1d.replacement
[L1D data line replacements]
cpu/umask=0x1,period=2000003,event=0x51/
l1d_pend_miss.fb_full
[Cycles a demand request was blocked due to Fill Buffers inavailability]
cpu/umask=0x2,period=2000003,cmask=1,event=0x48/
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170128020345.19007-6-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support to group the output of perf list by the Topic field in the
JSON file.
Example output:
% perf list
...
Cache:
l1d.replacement
[L1D data line replacements]
l1d_pend_miss.pending
[L1D miss oustandings duration in cycles]
l1d_pend_miss.pending_cycles
[Cycles with L1D load Misses outstanding]
l2_l1d_wb_rqsts.all
[Not rejected writebacks from L1D to L2 cache lines in any state]
l2_l1d_wb_rqsts.hit_e
[Not rejected writebacks from L1D to L2 cache lines in E state]
l2_l1d_wb_rqsts.hit_m
[Not rejected writebacks from L1D to L2 cache lines in M state]
...
Pipeline:
arith.fpu_div
[Divide operations executed]
arith.fpu_div_active
[Cycles when divider is busy executing divide operations]
baclears.any
[Counts the total number when the front end is resteered, mainly
when the BPU cannot provide a correct prediction and this is
corrected by other branch handling mechanisms at the front end]
br_inst_exec.all_branches
[Speculative and retired branches]
br_inst_exec.all_conditional
[Speculative and retired macro-conditional branches]
br_inst_exec.all_direct_jmp
[Speculative and retired macro-unconditional branches excluding
calls and indirects]
br_inst_exec.all_direct_near_call
[Speculative and retired direct near calls]
br_inst_exec.all_indirect_jump_non_call_ret
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-14-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Previously we were dropping the useful longer descriptions that some
events have in the event list completely. This patch makes them appear with
perf list.
Old perf list:
baclears:
baclears.all
[Counts the number of baclears]
vs new:
perf list -v:
...
baclears:
baclears.all
[The BACLEARS event counts the number of times the front end is
resteered, mainly when the Branch Prediction Unit cannot provide
a correct prediction and this is corrected by the Branch Address
Calculator at the front end. The BACLEARS.ANY event counts the
number of baclears for any type of branch]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-13-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a --no-desc flag to 'perf list' to not print the event descriptions
that were earlier added for JSON events. This may be useful to get a
less crowded listing.
It's still default to print descriptions as that is the more useful
default for most users.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1473978296-20712-9-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support to print alias descriptions in perf list, which are taken
from the generated event files.
The sorting code is changed to put the events with descriptions at the
end. The descriptions are printed as possibly multiple word wrapped
lines.
Example output:
% perf list
...
arith.fpu_div
[Divide operations executed]
arith.fpu_div_active
[Cycles when divider is busy executing divide operations]
Committer notes:
Further testing on a Broadwell machine (ThinkPad t450s), using these
files:
$ find tools/perf/pmu-events/arch/x86/
tools/perf/pmu-events/arch/x86/
tools/perf/pmu-events/arch/x86/Broadwell
tools/perf/pmu-events/arch/x86/Broadwell/Cache.json
tools/perf/pmu-events/arch/x86/Broadwell/Other.json
tools/perf/pmu-events/arch/x86/Broadwell/Frontend.json
tools/perf/pmu-events/arch/x86/Broadwell/Virtual-Memory.json
tools/perf/pmu-events/arch/x86/Broadwell/Pipeline.json
tools/perf/pmu-events/arch/x86/Broadwell/Floating-point.json
tools/perf/pmu-events/arch/x86/Broadwell/Memory.json
tools/perf/pmu-events/arch/x86/mapfile.csv
$
Taken from:
https://github.com/sukadev/linux/tree/json-code+data-v21/tools/perf/pmu-events/arch/x86/
to get this machinery to actually parse JSON files, generate
$(OUTPUT)pmu-events/pmu-events.c, compile it and link it with perf, that
will then use the table it contains, these files will be submitted right
after this patchkit.
[acme@jouet linux]$ perf list page_walker
List of pre-defined events (to be used in -e):
page_walker_loads.dtlb_l1
[Number of DTLB page walker hits in the L1+FB]
page_walker_loads.dtlb_l2
[Number of DTLB page walker hits in the L2]
page_walker_loads.dtlb_l3
[Number of DTLB page walker hits in the L3 + XSNP]
page_walker_loads.dtlb_memory
[Number of DTLB page walker hits in Memory]
page_walker_loads.itlb_l1
[Number of ITLB page walker hits in the L1+FB]
page_walker_loads.itlb_l2
[Number of ITLB page walker hits in the L2]
page_walker_loads.itlb_l3
[Number of ITLB page walker hits in the L3 + XSNP]
[acme@jouet linux]$
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-7-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds a PMU callback and the required mechanic so that drivers
can process the command line configuration elements found in
evsel::config_terms.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1474041004-13956-6-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add perf_pmu__format_bits() to get the format bits for a PMU config
term. Intel PT will use this to validate terms and to record format
bits to enable later interpreting the config from the attribute stored
in the perf.data file.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-15-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allowing event's term processing to report back error, like:
$ perf record -e 'cpu/even=0x1/' ls
event syntax error: 'cpu/even=0x1/'
\___ unknown term
valid terms: pc,any,inv,edge,cmask,event,in_tx,ldlat,umask,in_tx_cp,offcore_rsp,config,config1,config2,name,period,branch_type
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429729824-13932-7-git-send-email-jolsa@kernel.org
[ Renamed 'error' variables to 'err', not to clash with util.h error() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The .snapshot file indicates that the provided event value is a snapshot
value and we have to bypass the delta computation logic.
Adding support to check up this file and set event flag accordingly.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1416562275-12404-10-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The .per-pkg file indicates that all but one value per socket should be
discarded. Adding support to check up this file and set event flag
accordingly.
This patch is part of Matt's original patch:
http://marc.info/?l=linux-kernel&m=141527675002139&w=2 only the file
parsing part, the rest is solved differently.
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1416562275-12404-9-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf list only lists PMUs with events. Add a flag to cause a PMU to be
also listed separately.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1414061124-26830-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are two types of event formats for PMU events. E.g. el-abort OR
cpu/el-abort/. However, the lexer mistakenly recognizes the simple style
format as two events.
The parse_events_pmu_check function uses bsearch to search the name in
known pmu event list. It can tell the lexer that the name is a PE_NAME
or a PMU event name prefix or a PMU event name suffix. All these
information will be used for accurately parsing kernel PMU events.
The pmu events list will be read from sysfs at runtime.
Note: Currently, the patch only want to handle the PMU event name as
"a-b" and "a". The only exception, "stalled-cycles-frontend" and
"stalled-cycles-fronted", are already hardcoded in lexer.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1412694532-23391-3-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Passing pointers to alias modifiers 'unit' and 'scale' isn't very
future-proof since if we add more modifiers to the list we'll end up
passing more arguments.
Instead wrap everything up in a struct perf_pmu_info, which can easily
be expanded when additional alias modifiers are necessary in the future.
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1411567455-31264-3-git-send-email-matt@console-pimps.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a function to scan a sysfs file within the pmu device directory.
This will be used to read capability values from the PMU 'caps'
subdirectory.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1406786474-9306-8-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This allows default config terms to be provided for a PMU. So, for
example, when the Intel PT PMU is added, it will be possible to specify:
intel_pt//
which will be the same as:
intel_pt/tsc=1,noretcomp=0/
meaning that the trace should contain TSC timestamps and perform 'return
compression'.
An important consideration of this patch is that it must be possible to
overwrite the default values. That has meant changing the logic so that
a zero value can replace a non-zero value.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1406786474-9306-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can more readily understand in which list heads structs are
stored into.
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: Haren Myneni <hbabu@us.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <michaele@au1.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1408087583-32239-6-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Combine all definitions into a common tools/include/linux/types.h and
kill the wild growth elsewhere. Move DECLARE_BITMAP to its proper
bitmap.h header.
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Link: http://lkml.kernel.org/n/tip-azczs7qcv6h9xek9od10hiv2@git.kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
This patch fixes a problem with the handling of the newly introduced
optional event unit. The following cmdline caused a segfault:
$ perf stat -e cpu/event-0x3c/ ls
This patch fixes the problem with the default setting for alias->unit
which was eventually causing the segfault.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1389972846-6566-2-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds perf stat support for handling event units and
scales as exported by the kernel.
The kernel can export PMU events actual unit and scaling factor
via sysfs:
$ ls -1 /sys/devices/power/events/energy-*
/sys/devices/power/events/energy-cores
/sys/devices/power/events/energy-cores.scale
/sys/devices/power/events/energy-cores.unit
/sys/devices/power/events/energy-pkg
/sys/devices/power/events/energy-pkg.scale
/sys/devices/power/events/energy-pkg.unit
$ cat /sys/devices/power/events/energy-cores.scale
2.3283064365386962890625e-10
$ cat cat /sys/devices/power/events/energy-cores.unit
Joules
This patch modifies the pmu event alias code to check
for the presence of the .unit and .scale files to load
the corresponding values. They are then used by perf stat
transparently:
# perf stat -a -e power/energy-pkg/,power/energy-cores/,cycles -I 1000 sleep 1000
# time counts unit events
1.000214717 3.07 Joules power/energy-pkg/ [100.00%]
1.000214717 0.53 Joules power/energy-cores/
1.000214717 12965028 cycles [100.00%]
2.000749289 3.01 Joules power/energy-pkg/
2.000749289 0.52 Joules power/energy-cores/
2.000749289 15817043 cycles
When the event does not have an explicit unit exported by
the kernel, nothing is printed. In csv output mode, there
will be an empty field.
Special thanks to Jiri for providing the supporting code
in the parser to trigger reading of the scale and unit files.
Signed-off-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: zheng.z.yan@intel.com
Cc: bp@alien8.de
Cc: maria.n.dimakopoulou@gmail.com
Cc: acme@redhat.com
Link: http://lkml.kernel.org/r/1384275531-10892-3-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add support to perf stat to print the basic transactional execution statistics:
Total cycles, Cycles in Transaction, Cycles in aborted transsactions
using the in_tx and in_tx_checkpoint qualifiers.
Transaction Starts and Elision Starts, to compute the average transaction
length.
This is a reasonable overview over the success of the transactions.
Also support architectures that have a transaction aborted cycles
counter like POWER8. Since that is awkward to handle in the kernel
abstract handle both cases here.
Enable with a new --transaction / -T option.
This requires measuring these events in a group, since they depend on each
other.
This is implemented by using TM sysfs events exported by the kernel
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@infradead.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1377128846-977-5-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The name parameter is constant, declare it so.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1372944040-32690-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
They are only used in pmu.c, so no need to make them public in pmu.h.
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-3gu6vhyro22ywqcldy0gtegv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In tools/perf we use a convention where __ separates the struct name
from the function name for functions that operate on a struct instance.
Fix this usage by removing it from the struct names and fix also the
associated functions.
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-1tepcpohpvfg589pizx7tlkq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make perf build for x86 once the UAPI disintegration patches for that arch
have been applied by adding the appropriate -I flags - in the right order -
and then converting some #includes that use ../.. notation to find main kernel
headerfiles to use <asm/foo.h> and <linux/foo.h> instead.
Note that -Iarch/foo/include/uapi is present _before_ -Iarch/foo/include.
This makes sure we get the userspace version of the pt_regs struct. Ideally,
we wouldn't have the latter -I flag at all, but unfortunately we want
asm/svm.h and asm/vmx.h in builtin-kvm.c and these aren't part of the UAPI -
at least not for x86. I wonder if the bits outside of the __KERNEL__ guards
*should* be transferred there.
I note also that perf seems to do its dependency handling manually by listing
all the header files it might want to use in LIB_H in the Makefile. Can this
be changed to use -MD?
Note that to do make this work, we need to export and UAPI disintegrate
linux/hw_breakpoint.h, which I think should've been exported previously so that
perf can access the bits. We have to do this in the same patch to maintain
bisectability.
Signed-off-by: David Howells <dhowells@redhat.com>
The UAPI commits forgot to test tooling builds such as tools/perf/,
and this fixes the fallout.
Manual conversion.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With dynamic pmu allocation there are also dynamically assigned pmu ids.
These ids are used in event->attr.type to describe the pmu to be used
for that event. The information is available in sysfs, e.g:
/sys/bus/event_source/devices/breakpoint/type: 5
/sys/bus/event_source/devices/cpu/type: 4
/sys/bus/event_source/devices/ibs_fetch/type: 6
/sys/bus/event_source/devices/ibs_op/type: 7
/sys/bus/event_source/devices/software/type: 1
/sys/bus/event_source/devices/tracepoint/type: 2
These mappings are needed to know which samples belong to which pmu. If
a pmu is added dynamically like for ibs_fetch or ibs_op the type value
may vary.
Now, when decoding samples from perf.data this information in sysfs
might be no longer available or may have changed. We need to store it in
perf.data. Using the header for this. Now the header information created
with perf report contains an additional section looking like this:
# pmu mappings: ibs_op = 7, ibs_fetch = 6, cpu = 4, breakpoint = 5, tracepoint = 2, software = 1
Signed-off-by: Robert Richter <robert.richter@amd.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1345144224-27280-9-git-send-email-robert.richter@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support to specify alias term within the event description.
The definition of pmu event alias is located at:
${sysfs_mount}/bus/event_source/devices/${pmu}/events/
Each file in the 'events' directory defines a event alias. Its contents
are like:
config=1,config1=2
Using pmu event alias, an event can be now specified like:
uncore/CLOCKTICKS/ or uncore/event=CLOCKTICKS/
Signed-off-by: Zheng Yan <zheng.z.yan@intel.com>
[ Cleaned it up. ]
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1339741902-8449-13-git-send-email-zheng.z.yan@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Adding pmu object which provides interface to pmu's sysfs
event format definition located at:
${sysfs_mount}/bus/event_source/devices/${pmu}/format
Following interface is exported:
struct perf_pmu* perf_pmu__find(char *name);
- this function returns pmu object, which is then
passed as a handle to other interface functions
int perf_pmu__config(struct perf_pmu *pmu, struct perf_event_attr *attr,
struct list_head *head_terms);
- this function configures perf_event_attr struct based
on pmu's format definitions and config terms data,
containined in head_terms list.
Parser generator is used to retrive the pmu's format definition.
The generated parser is part of the patch. Added makefile rule
'pmu-parser' to generate the parser code out of the bison/flex
sources.
Added builtin test 'Test perf pmu format parsing', which could
be run like:
perf test pmu
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-errz96u1668gj9wlop1zhpht@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar