The Intel PMU event aliases have a implicit period= specifier to set the
default period.
Unfortunately this breaks overriding these periods with -c or -F,
because the alias terms look like they are user specified to the
internal parser, and user specified event qualifiers override the
command line options.
Track that they are coming from aliases by adding a "weak" state to the
term. Any weak terms don't override command line options.
I only did it for -c/-F for now, I think that's the only case that's
broken currently.
Before:
$ perf record -c 1000 -vv -e uops_issued.any
...
{ sample_period, sample_freq } 2000003
After:
$ perf record -c 1000 -vv -e uops_issued.any
...
{ sample_period, sample_freq } 1000
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20171020202755.21410-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, perf record is broken on arm/arm64 systems when the PMU is
specified explicitly as part of the event, e.g.
$ ./perf record -e armv8_cortex_a53/cpu_cycles/u true
In such cases, perf record fails to open events unless
perf_event_paranoid is set to -1, even if the PMU in question supports
mode exclusion. Further, even when perf_event_paranoid is toggled, no
samples are recorded.
This is an unintended side effect of commit:
e3ba76deef ("perf tools: Force uncore events to system wide monitoring)
... which assumes that if a PMU has an associated cpu_map, it is an
uncore PMU, and forces events for such PMUs to be system-wide.
This is not true for arm/arm64 systems, which can have heterogeneous
CPUs. To account for this, multiple CPU PMUs are exposed, each with a
"cpus" field under sysfs, which the perf tool parses into a cpu_map. ARM
PMUs do not have a "cpumask" file, and only have a "cpus" file. For the
gory details as to why, see commit:
7e3fcffe95 ("perf pmu: Support alternative sysfs cpumask")
Given all of this, we can instead identify uncore PMUs by explicitly
checking for a "cpumask" file, and restore arm/arm64 PMU support back to
a working state. This patch does so, adding a new perf_pmu::is_uncore
field, and splitting the existing cpumask parsing so that it can be
reused.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by Will Deacon <will.deacon@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: 4.12+ <stable@vger.kernel.org>
Fixes: e3ba76deef ("perf tools: Force uncore events to system wide monitoring)
Link: http://lkml.kernel.org/r/1507315102-5942-1-git-send-email-mark.rutland@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are no usage outside util.c and this is the only remaining reason
for fcntl.h to be included in util.h, to get the loff_t definition in
Alpine Linux, so make it static.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-2dzlsao7k6ihozs5karw6kpx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add generic support for standalone metrics specified in JSON files to
perf stat. A metric is a formula that uses multiple events to compute a
higher level result (e.g. IPC).
Previously metrics were always tied to an event and automatically
enabled with that event. But now change it that we can have standalone
metrics. They are in the same JSON data structure as events, but don't
have an event name.
We also allow to organize the metrics in metric groups, which allows a
short cut to select several related metrics at once.
Add a new -M / --metrics option to perf stat that adds the metrics or
metric groups specified.
Add the core code to manage and parse the metric groups. They are
collected from the JSON data structures into a separate rblist. When
computing shadow values look for metrics in that list. Then they are
computed using the existing saved values infrastructure in stat-shadow.c
The actual JSON metrics are in a separate pull request.
% perf stat -M Summary --metric-only -a sleep 1
Performance counter stats for 'system wide':
Instructions CLKS CPU_Utilization GFLOPs SMT_2T_Utilization Kernel_Utilization
317614222.0 1392930775.0 0.0 0.0 0.2 0.1
1.001497549 seconds time elapsed
% perf stat -M GFLOPs flops
Performance counter stats for 'flops':
3,999,541,471 fp_comp_ops_exe.sse_scalar_single # 1.2 GFLOPs (66.65%)
14 fp_comp_ops_exe.sse_scalar_double (66.65%)
0 fp_comp_ops_exe.sse_packed_double (66.67%)
0 fp_comp_ops_exe.sse_packed_single (66.70%)
0 simd_fp_256.packed_double (66.70%)
0 simd_fp_256.packed_single (66.67%)
0 duration_time
3.238372845 seconds time elapsed
v2: Add missing header file
v3: Move find_map to pmu.c
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170831194036.30146-7-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Extract the code to get the per cpu JSON alias into a separate function
for reuse. No behavior changes.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170831194036.30146-6-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Removing it from util.h, part of an effort to disentangle the includes
hell, that makes changes to util.h or something included by it to cause
a complete rebuild of the tools.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ztrjy52q1rqcchuy3rubfgt2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving them from util.h, where they don't belong. Since libc already
have string.h, name it slightly differently, as string2.h.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-eh3vz5sqxsrdd8lodoro4jrw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the printing of perf expressions and internal events to a new
clearer --details flag, instead of lumping it together with other debug
options in --debug. This makes it clearer to use.
Before
perf list --debug
...
unc_m_power_critical_throttle_cycles
[Cycles all ranks are in critical thermal throttle. Unit: uncore_imc]
uncore_imc_2/event=0x86/ MetricName: power_critical_throttle_cycles % MetricExpr: (unc_m_power_critical_throttle_cycles / unc_m_clockticks) * 100.
after
perf list --details
...
unc_m_power_critical_throttle_cycles
[Cycles all ranks are in critical thermal throttle. Unit: uncore_imc]
uncore_imc_2/event=0x86/ MetricName: power_critical_throttle_cycles % MetricExpr: (unc_m_power_critical_throttle_cycles / unc_m_clockticks) * 100.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/20170320201711.14142-14-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for a new JSON event attribute to name MetricExpr for better
output in perf stat.
If the event has no MetricName it uses the normal event name instead to
describe the metric.
Before
% perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' --metric-only
time unc_p_freq_max_os_cycles
1.000149775 15.7
2.000344807 19.3
3.000502544 16.7
4.000640656 6.6
5.000779955 9.9
After
% perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' --metric-only
time freq_max_os_cycles %
1.000149775 15.7
2.000344807 19.3
3.000502544 16.7
4.000640656 6.6
5.000779955 9.9
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170320201711.14142-13-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Output the metric expr in perf list when --debug is specified, so that
the user can check the formula.
Before:
% perf list
...
unc_m_power_channel_ppd
[Cycles where DRAM ranks are in power down (CKE) mode. Derived from unc_m_power_channel_ppd. Unit:
uncore_imc]
uncore_imc_2/event=0x85/
After:
% perf list --debug
...
unc_m_power_channel_ppd
[Cycles where DRAM ranks are in power down (CKE) mode. Derived from unc_m_power_channel_ppd. Unit:
uncore_imc]
Perf: uncore_imc_2/event=0x85/ MetricExpr: (unc_m_power_channel_ppd / unc_m_clockticks) * 100.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170320201711.14142-12-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add generic infrastructure to perf stat to output ratios for
"MetricExpr" entries in the event lists. Many events are more useful as
ratios than in raw form, typically some count in relation to total
ticks.
Transfer the MetricExpr information from the alias to the evsel.
We mark the events that need to be collected for MetricExpr, and also
link the events using them with a pointer. The code is careful to always
prefer the right event in the same group to minimize multiplexing
errors. At the moment only a single relation is supported.
Then add a rblist to the stat shadow code that remembers stats based on
the cpu and context.
Then finally update and retrieve and print these values similarly to the
existing hardcoded perf metrics. We use the simple expression parser
added earlier to evaluate the expression.
Normally we just output the result without further commentary, but for
--metric-only this would lead to empty columns. So for this case use the
original event as description.
There is no attempt to automatically add the MetricExpr event, if it is
missing, however we suggest it to the user, because the user tool
doesn't have enough information to reliably construct a group that is
guaranteed to schedule. So we leave that to the user.
% perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}'
1.000147889 800,085,181 unc_p_clockticks
1.000147889 93,126,241 unc_p_freq_max_os_cycles # 11.6
2.000448381 800,218,217 unc_p_clockticks
2.000448381 142,516,095 unc_p_freq_max_os_cycles # 17.8
3.000639852 800,243,057 unc_p_clockticks
3.000639852 162,292,689 unc_p_freq_max_os_cycles # 20.3
% perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' --metric-only
# time freq_max_os_cycles %
1.000127077 0.9
2.000301436 0.7
3.000456379 0.0
v2: Change from DivideBy to MetricExpr
v3: Use expr__ prefix. Support more than one other event.
v4: Update description
v5: Only print warning message once for multiple PMUs.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170320201711.14142-11-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for parsing the MetricExpr header in the JSON event lists
and storing them in the alias structure.
Used in the next patch.
v2: Change DividedBy to MetricExpr
v3: Really catch all uses of DividedBy
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170320201711.14142-10-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It now can have negative value to suppress the message entirely. So it
needs to check it being positive.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170217081742.17417-3-namhyung@kernel.org
[ Adjust fuzz on tools/perf/util/pmu.c, add > 0 checks in many other places ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we allow not to specify value for numeric terms and we set
them to value 1. This was originaly meant just for single bit terms to
allow user to type:
$ perf record -e 'cpu/cpu-cycles,any'
instead of:
$ perf record -e 'cpu/cpu-cycles,any=1'
However it works also for multi bits terms like:
$ perf record -e 'cpu/event/' ls
...
$ perf evlist -v
..., config: 0x1, ...
After discussion with Peter we decided making such term usage to fail,
like:
$ perf record -e 'cpu/event/' ls
event syntax error: 'cpu/event/'
\___ no value assigned for term
...
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1487340058-10496-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The alias->unit field is an array, so to check that it is not set we
should see if it is an empty string, i.e. alias->unit[0], instead of
checking alias->unit != NULL, as this will _always_ evaluate to 'true'.
Pointed out by clang.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170214182435.GD4458@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For debugging and testing it is useful to see the converted alias
string. Add support to perf stat/record and perf list to print the alias
conversion. The text string is saved in the alias structure. For perf
stat/record it is folded into the normal -v. For perf list -v was taken,
so we use --debug.
Before:
% perf list
...
cache:
l1d.replacement
[L1D data line replacements]
l1d_pend_miss.fb_full
[Cycles a demand request was blocked due to Fill Buffers inavailability]
After
% perf list --debug
...
cache:
l1d.replacement
[L1D data line replacements]
cpu/umask=0x1,period=2000003,event=0x51/
l1d_pend_miss.fb_full
[Cycles a demand request was blocked due to Fill Buffers inavailability]
cpu/umask=0x2,period=2000003,cmask=1,event=0x48/
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170128020345.19007-6-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for registering json aliases per PMU. Any alias with an unit
matching the prefix is registered to the PMU. Uncore has multiple
instances of most units, so all these aliases get registered for each
individual PMU (this is important later to run the event on every
instance of the PMU).
To avoid printing the events multiple times in perf list filter out
duplicated events during printing.
v2: Rely on uncore_ prefix already in unit
v3: Document why calls were reordered
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170128020345.19007-4-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Handle the "Unit" field, which is needed to find the right PMU for an
event. We call it "pmu" and convert it to the perf pmu name with an
uncore prefix.
Handle the "ExtSel" field, which just extends the event mask with an
additional bit.
Handle the "Filter" field which adds parameters to the main event
to configure filtering.
Handle the "Unit" field which declares the unit the values should be
scaled too (similar to what the kernel exports)
Set up the "perpkg" field for uncore events so that perf knows they are
per package (similar to what the kernel exports)
Then output the fields into the pmu-events data structures which are
compiled into perf.
Filter out zero fields, except for the event itself.
v2: Fix compilation. Add uncore_ prefix at pre-processing time.
Move eventcode change to separate patch.
v3: Remove extra __maybe_unused
v4: dont duplicate aliases for cpu pmu events
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170128020345.19007-3-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the scale factor parsing code to an own function to reuse it in an
upcoming patch.
v2: Return error in case strdup returns NULL.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170103150833.6694-2-andi@firstfloor.org
[ Keep returning -ENOMEM when strdup() fails in perf_pmu__parse_scale()/convert_scale() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support in perf list topic to only show events belonging to a
specific vendor events topic. For example the following works now:
% perf list frontend
List of pre-defined events (to be used in -e):
stalled-cycles-frontend OR idle-cycles-frontend [Hardware event]
stalled-cycles-frontend OR cpu/stalled-cycles-frontend/ [Kernel PMU event]
frontend:
dsb2mite_switches.count
[Decode Stream Buffer (DSB)-to-MITE switches]
dsb2mite_switches.penalty_cycles
[Decode Stream Buffer (DSB)-to-MITE switch true penalty cycles]
dsb_fill.exceed_dsb_lines
[Cycles when Decode Stream Buffer (DSB) fill encounter more than 3 Decode Stream Buffer (DSB)
lines]
icache.hit
[Number of Instruction Cache, Streaming Buffer and Victim Cache Reads. both cacheable and
noncacheable, including UC fetches]
...
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1476902724-9586-2-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make the 'perf list' glob matching for vendor events case insensitive.
This allows to use the upper case vendor events with perf list too.
Now the following works:
% perf list LONGEST_LAT
...
cache:
longest_lat_cache.miss
[Core-originated cacheable demand requests missed LLC]
longest_lat_cache.reference
[Core-originated cacheable demand requests that refer to LLC]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Suggested-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1476899402-31460-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With uncore event aliases which are duplicated over multiple PMUs the
"Using CPUID" message with -v could be printed many times. Only print
it once.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1476393332-20732-3-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support to group the output of perf list by the Topic field in the
JSON file.
Example output:
% perf list
...
Cache:
l1d.replacement
[L1D data line replacements]
l1d_pend_miss.pending
[L1D miss oustandings duration in cycles]
l1d_pend_miss.pending_cycles
[Cycles with L1D load Misses outstanding]
l2_l1d_wb_rqsts.all
[Not rejected writebacks from L1D to L2 cache lines in any state]
l2_l1d_wb_rqsts.hit_e
[Not rejected writebacks from L1D to L2 cache lines in E state]
l2_l1d_wb_rqsts.hit_m
[Not rejected writebacks from L1D to L2 cache lines in M state]
...
Pipeline:
arith.fpu_div
[Divide operations executed]
arith.fpu_div_active
[Cycles when divider is busy executing divide operations]
baclears.any
[Counts the total number when the front end is resteered, mainly
when the BPU cannot provide a correct prediction and this is
corrected by other branch handling mechanisms at the front end]
br_inst_exec.all_branches
[Speculative and retired branches]
br_inst_exec.all_conditional
[Speculative and retired macro-conditional branches]
br_inst_exec.all_direct_jmp
[Speculative and retired macro-unconditional branches excluding
calls and indirects]
br_inst_exec.all_direct_near_call
[Speculative and retired direct near calls]
br_inst_exec.all_indirect_jump_non_call_ret
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-14-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Previously we were dropping the useful longer descriptions that some
events have in the event list completely. This patch makes them appear with
perf list.
Old perf list:
baclears:
baclears.all
[Counts the number of baclears]
vs new:
perf list -v:
...
baclears:
baclears.all
[The BACLEARS event counts the number of times the front end is
resteered, mainly when the Branch Prediction Unit cannot provide
a correct prediction and this is corrected by the Branch Address
Calculator at the front end. The BACLEARS.ANY event counts the
number of baclears for any type of branch]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-13-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a PERF_CPUID variable to override the CPUID of the current CPU
(within the current architecture). This is useful for testing, so that
all event lists can be tested on a single system.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-10-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a --no-desc flag to 'perf list' to not print the event descriptions
that were earlier added for JSON events. This may be useful to get a
less crowded listing.
It's still default to print descriptions as that is the more useful
default for most users.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1473978296-20712-9-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Automatically adapt the now wider and word wrapped perf list output to
wider terminals. This requires querying the terminal before the auto
pager takes over, and exporting this information from the pager
subsystem.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-8-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support to print alias descriptions in perf list, which are taken
from the generated event files.
The sorting code is changed to put the events with descriptions at the
end. The descriptions are printed as possibly multiple word wrapped
lines.
Example output:
% perf list
...
arith.fpu_div
[Divide operations executed]
arith.fpu_div_active
[Cycles when divider is busy executing divide operations]
Committer notes:
Further testing on a Broadwell machine (ThinkPad t450s), using these
files:
$ find tools/perf/pmu-events/arch/x86/
tools/perf/pmu-events/arch/x86/
tools/perf/pmu-events/arch/x86/Broadwell
tools/perf/pmu-events/arch/x86/Broadwell/Cache.json
tools/perf/pmu-events/arch/x86/Broadwell/Other.json
tools/perf/pmu-events/arch/x86/Broadwell/Frontend.json
tools/perf/pmu-events/arch/x86/Broadwell/Virtual-Memory.json
tools/perf/pmu-events/arch/x86/Broadwell/Pipeline.json
tools/perf/pmu-events/arch/x86/Broadwell/Floating-point.json
tools/perf/pmu-events/arch/x86/Broadwell/Memory.json
tools/perf/pmu-events/arch/x86/mapfile.csv
$
Taken from:
https://github.com/sukadev/linux/tree/json-code+data-v21/tools/perf/pmu-events/arch/x86/
to get this machinery to actually parse JSON files, generate
$(OUTPUT)pmu-events/pmu-events.c, compile it and link it with perf, that
will then use the table it contains, these files will be submitted right
after this patchkit.
[acme@jouet linux]$ perf list page_walker
List of pre-defined events (to be used in -e):
page_walker_loads.dtlb_l1
[Number of DTLB page walker hits in the L1+FB]
page_walker_loads.dtlb_l2
[Number of DTLB page walker hits in the L2]
page_walker_loads.dtlb_l3
[Number of DTLB page walker hits in the L3 + XSNP]
page_walker_loads.dtlb_memory
[Number of DTLB page walker hits in Memory]
page_walker_loads.itlb_l1
[Number of ITLB page walker hits in the L1+FB]
page_walker_loads.itlb_l2
[Number of ITLB page walker hits in the L2]
page_walker_loads.itlb_l3
[Number of ITLB page walker hits in the L3 + XSNP]
[acme@jouet linux]$
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-7-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
At run time (when 'perf' is starting up), locate the specific table of
PMU events that corresponds to the current CPU. Using that table, create
aliases for the each of the PMU events in the CPU. The use these aliases
to parse the user specified perf event.
In short this would allow the user to specify events using their aliases
rather than raw event codes.
Based on input and some earlier patches from Andi Kleen, Jiri Olsa.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-4-git-send-email-sukadev@linux.vnet.ibm.com
[ Make pmu_add_cpu_aliases() return void, since it was returning just '0' and
furthermore, even that was being discarded via an explicit (void) cast ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf tools can read a cpumask file for a PMU, describing a subset of
CPUs which that PMU covers. So far this has only been used to cater for
uncore PMUs, which in practice happen to only have a single CPU
described in the mask.
Until recently, the perf tools only correctly handled cpumask containing
a single CPU, and only when monitoring in system-wide mode. For example,
prior to commit 00e727bb38 ("perf stat: Balance opening and
reading events"), a mask with more than a single CPU could cause perf
stat to hang. When a CPU PMU covers a subset of CPUs, but lacks a
cpumask, perf record will fail to open events (on the cores the PMU does
not support), and gives up.
For systems with heterogeneous CPUs such as ARM big.LITTLE systems, this
presents a problem. We have a PMU for each microarchitecture (e.g. a big
PMU and a little PMU), and would like to expose a cpumask for each (so
as to allow perf record and other tools to do the right thing). However,
doing so kernel-side will cause old perf binaries to not function (e.g.
hitting the issue solved by 00e727bb38), and thus commits the
cardinal sin of breaking (existing) userspace.
To address this chicken-and-egg problem, this patch adds support got a
new file, cpus, which is largely identical to the existing cpumask file.
A kernel can expose this file, knowing that new perf binaries will
correctly support it, while old perf binaries will not look for it (and
thus will not be broken).
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1473330112-28528-8-git-send-email-mark.rutland@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make pmu_formats_string() to check return value of strbuf APIs so that
it can detect errors in it.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160510054744.6158.37810.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the max value of format is calculated by the bits number. It
relies on the continuity of the format.
However, uncore event format is not continuous. E.g. uncore qpi event
format can be 0-7,21.
If bit 21 is set, there is parsing issues as below.
$ perf stat -a -e uncore_qpi_0/event=0x200002,umask=0x8/
event syntax error: '..pi_0/event=0x200002,umask=0x8/'
\___ value too big for format, maximum is 511
This patch return the real max value by setting all possible bits to 1.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1459365375-14285-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no need to use a const char pointer, we can used char pointer
from the beginning and omit the unnecessary cast.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160308184230.GB7897@krava.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo reported regression on display format of big numbers, which is
missing separators (in default perf stat output).
triton:~/tip> perf stat -a sleep 1
...
127008602 cycles # 0.011 GHz
279538533 stalled-cycles-frontend # 220.09% frontend cycles idle
119213269 instructions # 0.94 insn per cycle
This is caused by recent change:
perf stat: Check existence of frontend/backed stalled cycles
that added call to pmu_have_event, that subsequently calls
perf_pmu__parse_scale, which has a bug in locale handling.
The lc string returned from setlocale, that we use to store old locale
value, may be allocated in static storage. Getting a dynamic copy to
make it survive another setlocale call.
$ perf stat ls
...
2,360,602 cycles # 3.080 GHz
2,703,090 instructions # 1.15 insn per cycle
546,031 branches # 712.511 M/sec
Committer note:
Since the patch introducing the regression didn't made to perf/core,
move it to just before where the regression was introduced, so that we
don't break bisection for this feature.
Reported-by: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20160303095348.GA24511@krava.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When an error happens during alias parsing currently the complete
parsing of all attributes of the PMU is stopped. This is breaks old perf
on a newer kernel that may have not-yet-know alias attributes (such as
.scale or .per-pkg).
Continue when some attribute is unparseable.
This is IMHO a stable candidate and should be backported to older
versions to avoid problems with newer kernels.
v2: Print warnings when something goes wrong.
v3: Change warning to debug output
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: stable@vger.kernel.org # v3.6+
Link: http://lkml.kernel.org/r/1455749095-18358-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In these two cases, a 'perf test' entry and in the PMU code the
list_head is on the stack, so we can't use perf_event__free_terms()
(soon to be renamed to perf_event_terms__delete()), because it will
free the list_head as well.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/n/tip-i956ryjhz97gnnqe8iqe7m7s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
One line in perf_pmu__parse_unit() is indented wrongly, leading to a
warning (=> error) from gcc 6:
util/pmu.c:156:3: error: statement is indented as if it were guarded by... [-Werror=misleading-indentation]
sret = read(fd, alias->unit, UNIT_MAX_LEN);
^~~~
util/pmu.c:153:2: note: ...this 'if' clause, but it is not
if (fd == -1)
^~
Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 410136f5dd ("tools/perf/stat: Add event unit and scale support")
Link: http://lkml.kernel.org/r/20151214154440.GC1409@x4
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch fixes a bug in __perf_pmu__new_alias() whereby the
alias->snapshot field was not initialized to false. This led to random
alias->snapshot value for an alias and was breaking some measurements
such as:
$ perf stat -a -e uncore_imc/data_reads/ -I 1000 sleep 100
Because the event ended up being treated as snapshot mode, when it is
not.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1452106201-13073-1-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some PMUs, like the 'intel_bts' one can be used as an event name, i.e.:
$ perf record -e intel_bts:// usleep 1
Is a valid event name.
But the code printing such PMUs was not honouring the 'event_glob'
parameter, so the following line was always appearing:
$ intel_bts// [Kernel PMU event]
Fix it:
$ [acme@felicio linux]$ perf list data
List of pre-defined events (to be used in -e):
uncore_imc/data_reads/ [Kernel PMU event]
uncore_imc/data_writes/ [Kernel PMU event]
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ajb71858n7q7ao77b8pyy74w@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that one can, for instance, use it with wc -l:
# perf list *:*write* | wc -l
60
Or to look for the "bio" tracepoints, without 'perf list' headers:
# perf list *:*bio* | head
block:block_bio_backmerge [Tracepoint event]
block:block_bio_bounce [Tracepoint event]
block:block_bio_complete [Tracepoint event]
block:block_bio_frontmerge [Tracepoint event]
block:block_bio_queue [Tracepoint event]
block:block_bio_remap [Tracepoint event]
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ts7sc0x8u4io4cifzkup4j44@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Show proper error message and show valid terms when wrong config terms
is specified for hw/sw type perf events.
This patch makes the original error format function formats_error_string()
more generic, which only outputs the static config terms for hw/sw perf
events, and prepends pmu formats for pmu events.
Before this patch:
$ perf record -e 'cpu-clock/freqx=200/' -a sleep 1
invalid or unsupported event: 'cpu-clock/freqx=200/'
Run 'perf list' for a list of valid events
usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
After this patch:
$ perf record -e 'cpu-clock/freqx=200/' -a sleep 1
event syntax error: 'cpu-clock/freqx=200/'
\___ unknown term
valid terms: config,config1,config2,name,period,freq,branch_type,time,call-graph,stack-size
Run 'perf list' for a list of valid events
usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1443412336-120050-2-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now perf can set per-event value of time and (sampling) period. But I
guess most users like me just want to set frequency rather than period.
So add the 'freq' term in the event parser.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1439102724-14079-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Andi Kleen