Commit Graph

25615 Commits

Author SHA1 Message Date
Song Liu ec8149fba6 perf util: Move bpf_perf definitions to a libperf header
By following the same protocol, other tools can share hardware PMCs with
perf. Move perf_event_attr_map_entry and BPF_PERF_DEFAULT_ATTR_MAP_PATH to
bpf_perf.h for other tools to use.

Signed-off-by: Song Liu <song@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: kernel-team@fb.com
Link: https://lore.kernel.org/r/20210425214333.1090950-2-song@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-29 10:30:58 -03:00
Linus Torvalds 42dec9a936 Perf events changes in this cycle were:
- Improve Intel uncore PMU support:
 
      - Parse uncore 'discovery tables' - a new hardware capability enumeration method
        introduced on the latest Intel platforms. This table is in a well-defined PCI
        namespace location and is read via MMIO. It is organized in an rbtree.
 
        These uncore tables will allow the discovery of standard counter blocks, but
        fancier counters still need to be enumerated explicitly.
 
      - Add Alder Lake support
 
      - Improve IIO stacks to PMON mapping support on Skylake servers
 
  - Add Intel Alder Lake PMU support - which requires the introduction of 'hybrid' CPUs
    and PMUs. Alder Lake is a mix of Golden Cove ('big') and Gracemont ('small' - Atom derived)
    cores.
 
    The CPU-side feature set is entirely symmetrical - but on the PMU side there's
    core type dependent PMU functionality.
 
  - Reduce data loss with CPU level hardware tracing on Intel PT / AUX profiling, by
    fixing the AUX allocation watermark logic.
 
  - Improve ring buffer allocation on NUMA systems
 
  - Put 'struct perf_event' into their separate kmem_cache pool
 
  - Add support for synchronous signals for select perf events. The immediate motivation
    is to support low-overhead sampling-based race detection for user-space code. The
    feature consists of the following main changes:
 
     - Add thread-only event inheritance via perf_event_attr::inherit_thread, which limits
       inheritance of events to CLONE_THREAD.
 
     - Add the ability for events to not leak through exec(), via perf_event_attr::remove_on_exec.
 
     - Allow the generation of SIGTRAP via perf_event_attr::sigtrap, extend siginfo with an u64
       ::si_perf, and add the breakpoint information to ::si_addr and ::si_perf if the event is
       PERF_TYPE_BREAKPOINT.
 
    The siginfo support is adequate for breakpoints right now - but the new field can be used
    to introduce support for other types of metadata passed over siginfo as well.
 
  - Misc fixes, cleanups and smaller updates.
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmCJGpERHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1j9zBAAuVbG2snV6SBSdXLhQcM66N3NckOXvSY5
 QjjhQcuwJQEK/NJB3266K5d8qSmdyRBsWf3GCsrmyBT67P1V28K44Pu7oCV0UDtf
 mpVRjEP0oR7hNsANSSgo8Fa4ZD7H5waX7dK7925Tvw8By3mMoZoddiD/84WJHhxO
 NDF+GRFaRj+/dpbhV8cdCoXTjYdkC36vYuZs3b9lu0tS9D/AJgsNy7TinLvO02Cs
 5peP+2y29dgvCXiGBiuJtEA6JyGnX3nUJCvfOZZ/DWDc3fdduARlRrc5Aiq4n/wY
 UdSkw1VTZBlZ1wMSdmHQVeC5RIH3uWUtRoNqy0Yc90lBm55AQ0EENwIfWDUDC5zy
 USdBqWTNWKMBxlEilUIyqKPQK8LW/31TRzqy8BWKPNcZt5yP5YS1SjAJRDDjSwL/
 I+OBw1vjLJamYh8oNiD5b+VLqNQba81jFASfv+HVWcULumnY6ImECCpkg289Fkpi
 BVR065boifJDlyENXFbvTxyMBXQsZfA+EhtxG7ju2Ni+TokBbogyCb3L2injPt9g
 7jjtTOqmfad4gX1WSc+215iYZMkgECcUd9E+BfOseEjBohqlo7yNKIfYnT8mE/Xq
 nb7eHjyvLiE8tRtZ+7SjsujOMHv9LhWFAbSaxU/kEVzpkp0zyd6mnnslDKaaHLhz
 goUMOL/D0lg=
 =NhQ7
 -----END PGP SIGNATURE-----

Merge tag 'perf-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull perf event updates from Ingo Molnar:

 - Improve Intel uncore PMU support:

     - Parse uncore 'discovery tables' - a new hardware capability
       enumeration method introduced on the latest Intel platforms. This
       table is in a well-defined PCI namespace location and is read via
       MMIO. It is organized in an rbtree.

       These uncore tables will allow the discovery of standard counter
       blocks, but fancier counters still need to be enumerated
       explicitly.

     - Add Alder Lake support

     - Improve IIO stacks to PMON mapping support on Skylake servers

 - Add Intel Alder Lake PMU support - which requires the introduction of
   'hybrid' CPUs and PMUs. Alder Lake is a mix of Golden Cove ('big')
   and Gracemont ('small' - Atom derived) cores.

   The CPU-side feature set is entirely symmetrical - but on the PMU
   side there's core type dependent PMU functionality.

 - Reduce data loss with CPU level hardware tracing on Intel PT / AUX
   profiling, by fixing the AUX allocation watermark logic.

 - Improve ring buffer allocation on NUMA systems

 - Put 'struct perf_event' into their separate kmem_cache pool

 - Add support for synchronous signals for select perf events. The
   immediate motivation is to support low-overhead sampling-based race
   detection for user-space code. The feature consists of the following
   main changes:

     - Add thread-only event inheritance via
       perf_event_attr::inherit_thread, which limits inheritance of
       events to CLONE_THREAD.

     - Add the ability for events to not leak through exec(), via
       perf_event_attr::remove_on_exec.

     - Allow the generation of SIGTRAP via perf_event_attr::sigtrap,
       extend siginfo with an u64 ::si_perf, and add the breakpoint
       information to ::si_addr and ::si_perf if the event is
       PERF_TYPE_BREAKPOINT.

   The siginfo support is adequate for breakpoints right now - but the
   new field can be used to introduce support for other types of
   metadata passed over siginfo as well.

 - Misc fixes, cleanups and smaller updates.

* tag 'perf-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
  signal, perf: Add missing TRAP_PERF case in siginfo_layout()
  signal, perf: Fix siginfo_t by avoiding u64 on 32-bit architectures
  perf/x86: Allow for 8<num_fixed_counters<16
  perf/x86/rapl: Add support for Intel Alder Lake
  perf/x86/cstate: Add Alder Lake CPU support
  perf/x86/msr: Add Alder Lake CPU support
  perf/x86/intel/uncore: Add Alder Lake support
  perf: Extend PERF_TYPE_HARDWARE and PERF_TYPE_HW_CACHE
  perf/x86/intel: Add Alder Lake Hybrid support
  perf/x86: Support filter_match callback
  perf/x86/intel: Add attr_update for Hybrid PMUs
  perf/x86: Add structures for the attributes of Hybrid PMUs
  perf/x86: Register hybrid PMUs
  perf/x86: Factor out x86_pmu_show_pmu_cap
  perf/x86: Remove temporary pmu assignment in event_init
  perf/x86/intel: Factor out intel_pmu_check_extra_regs
  perf/x86/intel: Factor out intel_pmu_check_event_constraints
  perf/x86/intel: Factor out intel_pmu_check_num_counters
  perf/x86: Hybrid PMU support for extra_regs
  perf/x86: Hybrid PMU support for event constraints
  ...
2021-04-28 13:03:44 -07:00
Linus Torvalds 03b2cd72aa Objtool updates in this cycle were:
- Standardize the crypto asm code so that it looks like compiler-generated
    code to objtool - so that it can understand it. This enables unwinding
    from crypto asm code - and also fixes the last known remaining objtool
    warnings for LTO and more.
 
  - x86 decoder fixes: clean up and fix the decoder, and also extend it a bit
 
  - Misc fixes and cleanups
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmCJEOQRHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1jN0A//dZIR9GPW1cHkPD3Na+lxb+RWgCVnFUgw
 meLEOum389zWr7S8YmcFpKWLy94f3l24i/e7ufKn6/RMdaQuT6pZUa6teiNPqDKN
 Qq1v6EX/LT49Q1zh/zCCnKdlmF1t7wDyA1/+HBLnB4YfYEtteEt+p2Apyv4xIHOl
 xWqaTMFcVR/El9FXSyqRWRR4zuqY0Uatz0fmfo5jmi2xq460k53fQlTLA/0w5Jw0
 V3omyA3AYMUW6YlW5TGUINOhyDeAJm4PWl3siSUnSd6t8A/TVs5zpZX15BtseCle
 0FRp2SbxOoVkiyo3N3XmkfYYns9+4wK7cr9qja9U9MsSBZJZwaBm2LO/t2WFrAhq
 5dkOsoPmpIsjutsQnIhQgtVT9I/A4/u5m5Zi3trlXsBS0XAt/q+2GPfEngFmgb3q
 nae4rhGUsQ3NTGBiqNuMHQF4yeEvQZ8DCf3ytTz7DjBeiQ9nAtwzbUUGQjYl2mj1
 ZPOnl7Xmq/Nyw+AmdpffFPiEUJxqEg9HWjDo7DQATXb3Hw2VJ3cU8jwPRqDDlO10
 OB81vysXNGTmhOngHXexxncpmU9gDOIC1imZZpw5lNx4W9Qn20AlGaGAIbqzlfx0
 p5VuhkIWCySe1bOZx03xuk7Gq7GBIPPy/a2m204Ftipetlo1HBYwT3KB/wVpHmh7
 CSjWgdiW3+k=
 =poAZ
 -----END PGP SIGNATURE-----

Merge tag 'objtool-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull objtool updates from Ingo Molnar:

 - Standardize the crypto asm code so that it looks like compiler-
   generated code to objtool - so that it can understand it. This
   enables unwinding from crypto asm code - and also fixes the last
   known remaining objtool warnings for LTO and more.

 - x86 decoder fixes: clean up and fix the decoder, and also extend it a
   bit

 - Misc fixes and cleanups

* tag 'objtool-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  x86/crypto: Enable objtool in crypto code
  x86/crypto/sha512-ssse3: Standardize stack alignment prologue
  x86/crypto/sha512-avx2: Standardize stack alignment prologue
  x86/crypto/sha512-avx: Standardize stack alignment prologue
  x86/crypto/sha256-avx2: Standardize stack alignment prologue
  x86/crypto/sha1_avx2: Standardize stack alignment prologue
  x86/crypto/sha_ni: Standardize stack alignment prologue
  x86/crypto/crc32c-pcl-intel: Standardize jump table
  x86/crypto/camellia-aesni-avx2: Unconditionally allocate stack buffer
  x86/crypto/aesni-intel_avx: Standardize stack alignment prologue
  x86/crypto/aesni-intel_avx: Fix register usage comments
  x86/crypto/aesni-intel_avx: Remove unused macros
  objtool: Support asm jump tables
  objtool: Parse options from OBJTOOL_ARGS
  objtool: Collate parse_options() users
  objtool: Add --backup
  objtool,x86: More ModRM sugar
  objtool,x86: Rewrite ADD/SUB/AND
  objtool,x86: Support %riz encodings
  objtool,x86: Simplify register decode
  ...
2021-04-28 12:53:24 -07:00
Linus Torvalds 0ff0edb550 Locking changes for this cycle were:
- rtmutex cleanup & spring cleaning pass that removes ~400 lines of code
  - Futex simplifications & cleanups
  - Add debugging to the CSD code, to help track down a tenacious race (or hw problem)
  - Add lockdep_assert_not_held(), to allow code to require a lock to not be held,
    and propagate this into the ath10k driver
  - Misc LKMM documentation updates
  - Misc KCSAN updates: cleanups & documentation updates
  - Misc fixes and cleanups
  - Fix locktorture bugs with ww_mutexes
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmCJDn0RHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1hPrRAAryS4zPnuDsfkVk0smxo7a0lK5ljbH2Xo
 28QUZXOl6upnEV8dzbjwG7eAjt5ZJVI5tKIeG0PV0NUJH2nsyHwESdtULGGYuPf/
 4YUzNwZJa+nI/jeBnVsXCimLVxxnNCRdR7yOVOHm4ukEwa+YTNt1pvlYRmUd4YyH
 Q5cCrpb3THvLka3AAamEbqnHnAdGxHKuuHYVRkODpMQ+zrQvtN8antYsuk8kJsqM
 m+GZg/dVCuLEPah5k+lOACtcq/w7HCmTlxS8t4XLvD52jywFZLcCPvi1rk0+JR+k
 Vd9TngC09GJ4jXuDpr42YKkU9/X6qy2Es39iA/ozCvc1Alrhspx/59XmaVSuWQGo
 XYuEPx38Yuo/6w16haSgp0k4WSay15A4uhCTQ75VF4vli8Bqgg9PaxLyQH1uG8e2
 xk8U90R7bDzLlhKYIx1Vu5Z0t7A1JtB5CJtgpcfg/zQLlzygo75fHzdAiU5fDBDm
 3QQXSU2Oqzt7c5ZypioHWazARk7tL6th38KGN1gZDTm5zwifpaCtHi7sml6hhZ/4
 ATH6zEPzIbXJL2UqumSli6H4ye5ORNjOu32r7YPqLI4IDbzpssfoSwfKYlQG4Tvn
 4H1Ukirzni0gz5+wbleItzf2aeo1rocs4YQTnaT02j8NmUHUz4AzOHGOQFr5Tvh0
 wk/P4MIoSb0=
 =cOOk
 -----END PGP SIGNATURE-----

Merge tag 'locking-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull locking updates from Ingo Molnar:

 - rtmutex cleanup & spring cleaning pass that removes ~400 lines of
   code

 - Futex simplifications & cleanups

 - Add debugging to the CSD code, to help track down a tenacious race
   (or hw problem)

 - Add lockdep_assert_not_held(), to allow code to require a lock to not
   be held, and propagate this into the ath10k driver

 - Misc LKMM documentation updates

 - Misc KCSAN updates: cleanups & documentation updates

 - Misc fixes and cleanups

 - Fix locktorture bugs with ww_mutexes

* tag 'locking-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
  kcsan: Fix printk format string
  static_call: Relax static_call_update() function argument type
  static_call: Fix unused variable warn w/o MODULE
  locking/rtmutex: Clean up signal handling in __rt_mutex_slowlock()
  locking/rtmutex: Restrict the trylock WARN_ON() to debug
  locking/rtmutex: Fix misleading comment in rt_mutex_postunlock()
  locking/rtmutex: Consolidate the fast/slowpath invocation
  locking/rtmutex: Make text section and inlining consistent
  locking/rtmutex: Move debug functions as inlines into common header
  locking/rtmutex: Decrapify __rt_mutex_init()
  locking/rtmutex: Remove pointless CONFIG_RT_MUTEXES=n stubs
  locking/rtmutex: Inline chainwalk depth check
  locking/rtmutex: Move rt_mutex_debug_task_free() to rtmutex.c
  locking/rtmutex: Remove empty and unused debug stubs
  locking/rtmutex: Consolidate rt_mutex_init()
  locking/rtmutex: Remove output from deadlock detector
  locking/rtmutex: Remove rtmutex deadlock tester leftovers
  locking/rtmutex: Remove rt_mutex_timed_lock()
  MAINTAINERS: Add myself as futex reviewer
  locking/mutex: Remove repeated declaration
  ...
2021-04-28 12:37:53 -07:00
Linus Torvalds 9a45da9270 RCU changes for this cycle were:
- Bitmap support for "N" as alias for last bit
  - kvfree_rcu updates
  - mm_dump_obj() updates.  (One of these is to mm, but was suggested by Andrew Morton.)
  - RCU callback offloading update
  - Polling RCU grace-period interfaces
  - Realtime-related RCU updates
  - Tasks-RCU updates
  - Torture-test updates
  - Torture-test scripting updates
  - Miscellaneous fixes
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmCJCZERHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1hRjw/+Jkb9KvR9odPt/zqN/KPtIlburCUWgsFb
 2zAlWN4uMocPAiXT2Xq58/8gqMkpyn7ZVZtL1tD8fZSvlwEr0U8Z74+/NdoQvYE+
 kMXIYIuhIAGRyAupmzkriqN33iY+BSZPacX3u6ziPj57/0OZzbWVN/DAhbuvyLqG
 J/oL4PHCa7XAqXbf95rd5Zjs680QJ3CbTRh4nA8uHArzJmKZOaaHJ05Pxd1LpULe
 SJ+5p1GQnnwxd1HqmlHMDu/dW+2hE35BGykF8zi78je9OJXualDoM/6JpIYGhMNY
 5qlhU55QYP1jzjuNGVZZUS4L77eS2/W7SpPAaTmMEy/SsVB59G8Kf22oNDpVaEqQ
 m+2ErqwaHvlkMjqnsx+JQbsOP0yCi2NZBoEPFdfk1H23E2deVlSDbxPso4Zb1oUD
 E12769kN+SWDytuLSOAe1PY/KXqmNUKjPZl1GDCGXL7HlCnWyggUDschTsKJa19O
 XXl+yCTGMUH4XAPSqavAKQbBjurqpT6i4zfooSH4TBtOHm1ExgZOUS8gglZ1JuJd
 q+uJdZIgS8BcGkGw/k1bYDWY5TA4Rjv3sAOKQL1PgYBl1t/yLK441mE7LI9gWOwz
 Crz7vlSxD6Jc2cYQeUVW0KPGt5aVd63Gd9HjpXxGkqYQSDRqYMCebHEAGagz+jj7
 Nv/nOnf34Uc=
 =mpNt
 -----END PGP SIGNATURE-----

Merge tag 'core-rcu-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull RCU updates from Ingo Molnar:

 - Support for "N" as alias for last bit in bitmap parsing library (eg
   using syntax like "nohz_full=2-N")

 - kvfree_rcu updates

 - mm_dump_obj() updates. (One of these is to mm, but was suggested by
   Andrew Morton.)

 - RCU callback offloading update

 - Polling RCU grace-period interfaces

 - Realtime-related RCU updates

 - Tasks-RCU updates

 - Torture-test updates

 - Torture-test scripting updates

 - Miscellaneous fixes

* tag 'core-rcu-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits)
  rcutorture: Test start_poll_synchronize_rcu() and poll_state_synchronize_rcu()
  rcu: Provide polling interfaces for Tiny RCU grace periods
  torture: Fix kvm.sh --datestamp regex check
  torture: Consolidate qemu-cmd duration editing into kvm-transform.sh
  torture: Print proper vmlinux path for kvm-again.sh runs
  torture: Make TORTURE_TRUST_MAKE available in kvm-again.sh environment
  torture: Make kvm-transform.sh update jitter commands
  torture: Add --duration argument to kvm-again.sh
  torture: Add kvm-again.sh to rerun a previous torture-test
  torture: Create a "batches" file for build reuse
  torture: De-capitalize TORTURE_SUITE
  torture: Make upper-case-only no-dot no-slash scenario names official
  torture: Rename SRCU-t and SRCU-u to avoid lowercase characters
  torture: Remove no-mpstat error message
  torture: Record kvm-test-1-run.sh and kvm-test-1-run-qemu.sh PIDs
  torture: Record jitter start/stop commands
  torture: Extract kvm-test-1-run-qemu.sh from kvm-test-1-run.sh
  torture: Record TORTURE_KCONFIG_GDB_ARG in qemu-cmd
  torture: Abstract jitter.sh start/stop into scripts
  rcu: Provide polling interfaces for Tree RCU grace periods
  ...
2021-04-28 12:00:13 -07:00
Linus Torvalds 3aa139aa9f media updates for v5.13-rc1
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmCH7/AACgkQCF8+vY7k
 4RVWVg//bcGubc1Sq68r0C+RMI1ETWMthtlkz9DTigDnht8uTmO+DohsE9R1mq4I
 szwwcwfMnMdbLB+zP7v1JNicT8GNMeFu7STurwj1w6YeQ5/IHcQc4P39+/8EAwqB
 hrUSIsY+RuYuv7dROwi45Yn8/mmWH4vdP3zrm3/k/EdlEBrf6C0e0KbGLqCr9Zrx
 pWVMB22RGfzh+1qQJhA43rDYceXs5/b5/Y1Dc/W97lJXyv87Hy0g333R+G1KzKLf
 3fhluSaLHC1j6Mm7Vneowy3mDjeyPZBiRajvNbbApQMzKIa78rJGOjMEBynHW1Rl
 Np7N0cGIq2a/yai7fCQk1SO9MdsLzE8rG+X/KxS3LSgb8c1RT31VaZhRfD9Pn4Gr
 asJ/JO7SX3YHXDO8F9WtsD/Fi9AREPz2o3I1760zk5KNQf9uvxeWkQPHQkKLlO/7
 6JWtmu5KbzUMqXZyekhcTDfqJE3xgUg36xLa7wDy8FlgDfE9MZUBaRwktHyfNgi0
 6tDdv1/w0iEvglUGVLMlQRh2ysx3lgBuAmI8Jg1vSt9DhZLsj8DY89/JE3B+CCBX
 uT9Zwc/Ug/HEpYMEhptP26z/TgVIkxs5iCvKripJ5GKl/tEIqsHSjqW5lzgI/6O+
 hKjxgZdeQ8+F9TJ5AMIBDU82trwDj77lIcHsRFRI6JLs/9L2PRo=
 =fvc5
 -----END PGP SIGNATURE-----

Merge tag 'media/v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - addition of a maintainer's profile for the media subsystem

 - addition of i.MX8 IP support

 - qcom/camss gained support for hardware version Titan 170

 - new RC keymaps

 - Lots of other improvements, cleanups and bug fixes

* tag 'media/v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (488 commits)
  media: coda: fix macroblocks count control usage
  media: rkisp1: params: fix wrong bits settings
  media: cedrus: Fix H265 status definitions
  media: meson-ge2d: fix rotation parameters
  media: v4l2-ctrls: fix reference to freed memory
  media: venus : hfi: add venus image info into smem
  media: venus: Fix internal buffer size calculations for v6.
  media: venus: helpers: keep max bandwidth when mbps exceeds the supported range
  media: venus: fix hw overload error log condition
  media: venus: core: correct firmware name for sm8250
  media: venus: core,pm: fix potential infinite loop
  media: venus: core: Fix kerneldoc warnings
  media: gscpa/stv06xx: fix memory leak
  media: cx25821: remove unused including <linux/version.h>
  media: staging: media/meson: remove redundant dev_err call
  media: adv7842: support 1 block EDIDs, fix clearing EDID
  media: adv7842: configure all pads
  media: allegro: change kernel-doc comment blocks to normal comments
  media: camss: ispif: Remove redundant dev_err call in msm_ispif_subdev_init()
  media: i2c: rdamc21: Fix warning on u8 cast
  ...
2021-04-28 09:24:36 -07:00
Linus Torvalds 1e9599dfc4 linux-kselftest-kunit-5.13-rc1
This KUnit update for Linux 5.13-rc1 consists of several fixes and
 new feature to support failure from dynamic analysis tools such as
 UBSAN and fake ops for testing.
 
 - a fake ops struct for testing a "free" function to complain if it
   was called with an invalid argument, or caught a double-free. Most
   return void and have no normal means of signalling failure
   (e.g. super_operations, iommu_ops, etc.).
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmCIpAEACgkQCwJExA0N
 QxyPtRAAgA9/X6zSvT1LftnTkgl0Zn+4Krbr7eNyvxcVdJkYrmW31Pk8PaTK02Z/
 OVDzw0ESHaAN2SwDOmKFUyiob9qBZjf4lEHDkGWLnSkV3GHd9JrM+kceyX/0yr8E
 bpYvGZHBKe+SGtAr1H9DcUcfzCZlDUhUI2HOMwm/h29mFmmJOlrjvNUAGY4pnmti
 6Mqh4GAoFxqQDDUANUIWinWU56rWrcIPQgxPD6/r2VvrC8gHtQ+2dBR8+3i2qSQO
 Ydzgno/8OmXfl606NMKh5DPS6E8uRrLw67fBB+YoEGK6E9w5yyXKKAbV3M3ekB/Y
 3ze/SUi6IKrvdF6OEH4mX3rMNEKgRQoJLpQ8KyMvDMuIAdmq3xQQFDlSc2+gEnTj
 VnEREBhrIOh24GxZFTM6VvNmjNqdAq4/BMTt/LoSHEKwOASZi9udAnKjo67P/LB1
 1+rcoKdn/OA7p9/Zo/ETpTkFvEDyF2TscaEgYz2aRiV0YgcncPc1RSDAzbghdlFP
 y10Dk3uARXdzqrd0Hb1B3HL+cAPZEINerqqAUl0ggWejcJjfUDMi7sQuKEK8I5yU
 6sSXyVhCHDNmOUjuJjt5JdqeadLUDCkZqEnMMvwqKz00WKioQ2pqYy/UJ2rpWy+G
 +pymI17nRcOVfIIqnXitSCgch7cS0FZCjiOqZBBCCs9Axuv7mJU=
 =aP5e
 -----END PGP SIGNATURE-----

Merge tag 'linux-kselftest-kunit-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull KUnit updates from Shuah Khan:
 "Several fixes and a new feature to support failure from dynamic
  analysis tools such as UBSAN and fake ops for testing.

   - a fake ops struct for testing a "free" function to complain if it
     was called with an invalid argument, or caught a double-free. Most
     return void and have no normal means of signalling failure (e.g.
     super_operations, iommu_ops, etc.)"

* tag 'linux-kselftest-kunit-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  Documentation: kunit: add tips for using current->kunit_test
  kunit: fix -Wunused-function warning for __kunit_fail_current_test
  kunit: support failure from dynamic analysis tools
  kunit: tool: make --kunitconfig accept dirs, add lib/kunit fragment
  kunit: make KUNIT_EXPECT_STREQ() quote values, don't print literals
  kunit: Match parenthesis alignment to improve code readability
2021-04-27 18:56:29 -07:00
Linus Torvalds 2a68c268a1 linux-kselftest-next-5.13-rc1
This Kselftest update for Linux 5.13-rc1 consists of:
 
 - fixes and updates to resctrl test from Fenghua Yu and Reinette Chatre
 - fixes to Kselftest documentation, framework
 - minor spelling correction in timers test
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmCIls8ACgkQCwJExA0N
 QxzrDg/9E2+KrNsqT/bVZIDZgPsLOPtkIaNd+94wsGKgHUSekoHRYKcmeRZLLA3x
 m6s4Jc8o84rztRgjjttWCOQD3ICsFC5Dp4eu2f8YowlPqPRn0MMJEUwQAPhxnFq0
 44KQ2v7bJhXYZRwhZXcv1Gu1o3o6cx59X9pLFo/Yf/OeTHj7ulegWtjCvBcS2uuT
 bhI0YbiCKDE4gIXYLPWKD96JjLRVo5zYnMIRqDJrgf7xSr+xoKmsZKSgkt6ca+My
 KSYtkaXDEB1DFNoovDQyhmAwImeqWgEKPMZIblLyfoUJNRyBQg9flRvguBzgR3TM
 J1lvavNZSC7qgx9xQI4DjsHtpn9y9C5/k9vXauhVtdMpMGY6zrz2zN5/xOohXjzN
 vlonhp6G/wkfxuo0Dcr++Oqlw5wWt55hxFJm84rIQ/2IYUfRBKWV5c2mUKRUJzrr
 pT3fcIpN1WTEBaxvC4/aL5oLvF/RSArSKs7StX1uzkedy7IwPsiCJa5OgT2iNSbH
 tpDS9KNOiLIkwpr8dBF9O9WRBo8ZtUoB1OPqQWuc0PMa0RDT4i/oTwe0ulu5rWma
 5G3yQIilTsRAxpFWihklBiV0pB9bT8O/d8kMlagj/znl8GmKyiXEMDwrCPfVmp16
 zNMskcarXWgL+BdhnSX5j53tLL6MEAWS1RzweR62U20eyPJF34Y=
 =0VC+
 -----END PGP SIGNATURE-----

Merge tag 'linux-kselftest-next-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest updates from Shuah Khan:

 - fixes and updates to resctrl test from Fenghua Yu and Reinette Chatre

 - fixes to Kselftest documentation, framework

 - minor spelling correction in timers test

* tag 'linux-kselftest-next-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (25 commits)
  selftests/resctrl: Change a few printed messages
  Documentation: kselftest: fix path to test module files
  selftests/resctrl: Create .gitignore to include resctrl_tests
  selftests/resctrl: Fix checking for < 0 for unsigned values
  selftests/resctrl: Fix incorrect parsing of iMC counters
  selftests/resctrl: Fix unmount resctrl FS
  selftests/resctrl: Skip the test if requested resctrl feature is not supported
  selftests/resctrl: Modularize resctrl test suite main() function
  selftests/resctrl: Don't hard code value of "no_of_bits" variable
  selftests/resctrl: Fix MBA/MBM results reporting format
  selftests/resctrl: Use resctrl/info for feature detection
  selftests/resctrl: Check for resctrl mount point only if resctrl FS is supported
  selftests/resctrl: Add config dependencies
  selftests/resctrl: Fix a printed message
  selftests/resctrl: Share show_cache_info() by CAT and CMT tests
  selftests/resctrl: Call kselftest APIs to log test results
  selftests/resctrl: Rename CQM test as CMT test
  selftests/resctrl: Fix missing options "-n" and "-p"
  selftests/resctrl: Ensure sibling CPU is not same as original CPU
  selftests/resctrl: Clean up resctrl features check
  ...
2021-04-27 18:54:01 -07:00
Linus Torvalds c6536676c7 - turn the stack canary into a normal __percpu variable on 32-bit which
gets rid of the LAZY_GS stuff and a lot of code.
 
 - Add an insn_decode() API which all users of the instruction decoder
 should preferrably use. Its goal is to keep the details of the
 instruction decoder away from its users and simplify and streamline how
 one decodes insns in the kernel. Convert its users to it.
 
 - kprobes improvements and fixes
 
 - Set the maximum DIE per package variable on Hygon
 
 - Rip out the dynamic NOP selection and simplify all the machinery around
 selecting NOPs. Use the simplified NOPs in objtool now too.
 
 - Add Xeon Sapphire Rapids to list of CPUs that support PPIN
 
 - Simplify the retpolines by folding the entire thing into an
 alternative now that objtool can handle alternatives with stack
 ops. Then, have objtool rewrite the call to the retpoline with the
 alternative which then will get patched at boot time.
 
 - Document Intel uarch per models in intel-family.h
 
 - Make Sub-NUMA Clustering topology the default and Cluster-on-Die the
 exception on Intel.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmCHyJQACgkQEsHwGGHe
 VUpjiRAAwPZdwwp08ypZuMHR4EhLNru6gYhbAoALGgtYnQjLtn5onQhIeieK+R4L
 cmZpxHT9OFp5dXHk4kwygaQBsD4pPOiIpm60kye1dN3cSbOORRdkwEoQMpKMZ+5Y
 kvVsmn7lrwRbp600KdE4G6L5+N6gEgr0r6fMFWWGK3mgVAyCzPexVHgydcp131ch
 iYMo6/pPDcNkcV/hboVKgx7GISdQ7L356L1MAIW/Sxtw6uD/X4qGYW+kV2OQg9+t
 nQDaAo7a8Jqlop5W5TQUdMLKQZ1xK8SFOSX/nTS15DZIOBQOGgXR7Xjywn1chBH/
 PHLwM5s4XF6NT5VlIA8tXNZjWIZTiBdldr1kJAmdDYacrtZVs2LWSOC0ilXsd08Z
 EWtvcpHfHEqcuYJlcdALuXY8xDWqf6Q2F7BeadEBAxwnnBg+pAEoLXI/1UwWcmsj
 wpaZTCorhJpYo2pxXckVdHz2z0LldDCNOXOjjaWU8tyaOBKEK6MgAaYU7e0yyENv
 mVc9n5+WuvXuivC6EdZ94Pcr/KQsd09ezpJYcVfMDGv58YZrb6XIEELAJIBTu2/B
 Ua8QApgRgetx+1FKb8X6eGjPl0p40qjD381TADb4rgETPb1AgKaQflmrSTIik+7p
 O+Eo/4x/GdIi9jFk3K+j4mIznRbUX0cheTJgXoiI4zXML9Jv94w=
 =bm4S
 -----END PGP SIGNATURE-----

Merge tag 'x86_core_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 updates from Borislav Petkov:

 - Turn the stack canary into a normal __percpu variable on 32-bit which
   gets rid of the LAZY_GS stuff and a lot of code.

 - Add an insn_decode() API which all users of the instruction decoder
   should preferrably use. Its goal is to keep the details of the
   instruction decoder away from its users and simplify and streamline
   how one decodes insns in the kernel. Convert its users to it.

 - kprobes improvements and fixes

 - Set the maximum DIE per package variable on Hygon

 - Rip out the dynamic NOP selection and simplify all the machinery
   around selecting NOPs. Use the simplified NOPs in objtool now too.

 - Add Xeon Sapphire Rapids to list of CPUs that support PPIN

 - Simplify the retpolines by folding the entire thing into an
   alternative now that objtool can handle alternatives with stack ops.
   Then, have objtool rewrite the call to the retpoline with the
   alternative which then will get patched at boot time.

 - Document Intel uarch per models in intel-family.h

 - Make Sub-NUMA Clustering topology the default and Cluster-on-Die the
   exception on Intel.

* tag 'x86_core_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
  x86, sched: Treat Intel SNC topology as default, COD as exception
  x86/cpu: Comment Skylake server stepping too
  x86/cpu: Resort and comment Intel models
  objtool/x86: Rewrite retpoline thunk calls
  objtool: Skip magical retpoline .altinstr_replacement
  objtool: Cache instruction relocs
  objtool: Keep track of retpoline call sites
  objtool: Add elf_create_undef_symbol()
  objtool: Extract elf_symbol_add()
  objtool: Extract elf_strtab_concat()
  objtool: Create reloc sections implicitly
  objtool: Add elf_create_reloc() helper
  objtool: Rework the elf_rebuild_reloc_section() logic
  objtool: Fix static_call list generation
  objtool: Handle per arch retpoline naming
  objtool: Correctly handle retpoline thunk calls
  x86/retpoline: Simplify retpolines
  x86/alternatives: Optimize optimize_nops()
  x86: Add insn_decode_kernel()
  x86/kprobes: Move 'inline' to the beginning of the kprobe_is_ss() declaration
  ...
2021-04-27 17:45:09 -07:00
Pedro Tammela 3733bfbbdd bpf, selftests: Update array map tests for per-cpu batched ops
Follows the same logic as the hashtable tests.

Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210424214510.806627-3-pctammela@mojatatu.com
2021-04-28 01:18:12 +02:00
Daniel Borkmann 10bf4e8316 bpf: Fix propagation of 32 bit unsigned bounds from 64 bit bounds
Similarly as b02709587e ("bpf: Fix propagation of 32-bit signed bounds
from 64-bit bounds."), we also need to fix the propagation of 32 bit
unsigned bounds from 64 bit counterparts. That is, really only set the
u32_{min,max}_value when /both/ {umin,umax}_value safely fit in 32 bit
space. For example, the register with a umin_value == 1 does /not/ imply
that u32_min_value is also equal to 1, since umax_value could be much
larger than 32 bit subregister can hold, and thus u32_min_value is in
the interval [0,1] instead.

Before fix, invalid tracking result of R2_w=inv1:

  [...]
  5: R0_w=inv1337 R1=ctx(id=0,off=0,imm=0) R2_w=inv(id=0) R10=fp0
  5: (35) if r2 >= 0x1 goto pc+1
  [...] // goto path
  7: R0=inv1337 R1=ctx(id=0,off=0,imm=0) R2=inv(id=0,umin_value=1) R10=fp0
  7: (b6) if w2 <= 0x1 goto pc+1
  [...] // goto path
  9: R0=inv1337 R1=ctx(id=0,off=0,imm=0) R2=inv(id=0,smin_value=-9223372036854775807,smax_value=9223372032559808513,umin_value=1,umax_value=18446744069414584321,var_off=(0x1; 0xffffffff00000000),s32_min_value=1,s32_max_value=1,u32_max_value=1) R10=fp0
  9: (bc) w2 = w2
  10: R0=inv1337 R1=ctx(id=0,off=0,imm=0) R2_w=inv1 R10=fp0
  [...]

After fix, correct tracking result of R2_w=inv(id=0,umax_value=1,var_off=(0x0; 0x1)):

  [...]
  5: R0_w=inv1337 R1=ctx(id=0,off=0,imm=0) R2_w=inv(id=0) R10=fp0
  5: (35) if r2 >= 0x1 goto pc+1
  [...] // goto path
  7: R0=inv1337 R1=ctx(id=0,off=0,imm=0) R2=inv(id=0,umin_value=1) R10=fp0
  7: (b6) if w2 <= 0x1 goto pc+1
  [...] // goto path
  9: R0=inv1337 R1=ctx(id=0,off=0,imm=0) R2=inv(id=0,smax_value=9223372032559808513,umax_value=18446744069414584321,var_off=(0x0; 0xffffffff00000001),s32_min_value=0,s32_max_value=1,u32_max_value=1) R10=fp0
  9: (bc) w2 = w2
  10: R0=inv1337 R1=ctx(id=0,off=0,imm=0) R2_w=inv(id=0,umax_value=1,var_off=(0x0; 0x1)) R10=fp0
  [...]

Thus, same issue as in b02709587e holds for unsigned subregister tracking.
Also, align __reg64_bound_u32() similarly to __reg64_bound_s32() as done in
b02709587e to make them uniform again.

Fixes: 3f50f132d8 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Reported-by: Manfred Paul (@_manfp)
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
2021-04-27 17:13:49 +02:00
Andrii Nakryiko bede0ebf0b selftests/bpf: Fix core_reloc test runner
Fix failed tests checks in core_reloc test runner, which allowed failing tests
to pass quietly. Also add extra check to make sure that expected to fail test cases with
invalid names are caught as test failure anyway, as this is not an expected
failure mode. Also fix mislabeled probed vs direct bitfield test cases.

Fixes: 124a892d1c ("selftests/bpf: Test TYPE_EXISTS and TYPE_SIZE CO-RE relocations")
Reported-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Lorenz Bauer <lmb@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210426192949.416837-6-andrii@kernel.org
2021-04-26 18:37:13 -07:00
Andrii Nakryiko 5a30eb2392 selftests/bpf: Fix field existence CO-RE reloc tests
Negative field existence cases for have a broken assumption that FIELD_EXISTS
CO-RE relo will fail for fields that match the name but have incompatible type
signature. That's not how CO-RE relocations generally behave. Types and fields
that match by name but not by expected type are treated as non-matching
candidates and are skipped. Error later is reported if no matching candidate
was found. That's what happens for most relocations, but existence relocations
(FIELD_EXISTS and TYPE_EXISTS) are more permissive and they are designed to
return 0 or 1, depending if a match is found. This allows to handle
name-conflicting but incompatible types in BPF code easily. Combined with
___flavor suffixes, it's possible to handle pretty much any structural type
changes in kernel within the compiled once BPF source code.

So, long story short, negative field existence test cases are invalid in their
assumptions, so this patch reworks them into a single consolidated positive
case that doesn't match any of the fields.

Fixes: c7566a6969 ("selftests/bpf: Add field existence CO-RE relocs tests")
Reported-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Lorenz Bauer <lmb@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210426192949.416837-5-andrii@kernel.org
2021-04-26 18:37:13 -07:00
Andrii Nakryiko 0f20615d64 selftests/bpf: Fix BPF_CORE_READ_BITFIELD() macro
Fix BPF_CORE_READ_BITFIELD() macro used for reading CO-RE-relocatable
bitfields. Missing breaks in a switch caused 8-byte reads always. This can
confuse libbpf because it does strict checks that memory load size corresponds
to the original size of the field, which in this case quite often would be
wrong.

After fixing that, we run into another problem, which quite subtle, so worth
documenting here. The issue is in Clang optimization and CO-RE relocation
interactions. Without that asm volatile construct (also known as
barrier_var()), Clang will re-order BYTE_OFFSET and BYTE_SIZE relocations and
will apply BYTE_OFFSET 4 times for each switch case arm. This will result in
the same error from libbpf about mismatch of memory load size and original
field size. I.e., if we were reading u32, we'd still have *(u8 *), *(u16 *),
*(u32 *), and *(u64 *) memory loads, three of which will fail. Using
barrier_var() forces Clang to apply BYTE_OFFSET relocation first (and once) to
calculate p, after which value of p is used without relocation in each of
switch case arms, doing appropiately-sized memory load.

Here's the list of relevant relocations and pieces of generated BPF code
before and after this patch for test_core_reloc_bitfields_direct selftests.

BEFORE
=====
 #45: core_reloc: insn #160 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32
 #46: core_reloc: insn #167 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32
 #47: core_reloc: insn #174 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32
 #48: core_reloc: insn #178 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32
 #49: core_reloc: insn #182 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32

     157:       18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll
     159:       7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1
     160:       b7 02 00 00 04 00 00 00 r2 = 4
; BYTE_SIZE relocation here                 ^^^
     161:       66 02 07 00 03 00 00 00 if w2 s> 3 goto +7 <LBB0_63>
     162:       16 02 0d 00 01 00 00 00 if w2 == 1 goto +13 <LBB0_65>
     163:       16 02 01 00 02 00 00 00 if w2 == 2 goto +1 <LBB0_66>
     164:       05 00 12 00 00 00 00 00 goto +18 <LBB0_69>

0000000000000528 <LBB0_66>:
     165:       18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll
     167:       69 11 08 00 00 00 00 00 r1 = *(u16 *)(r1 + 8)
; BYTE_OFFSET relo here w/ WRONG size        ^^^^^^^^^^^^^^^^
     168:       05 00 0e 00 00 00 00 00 goto +14 <LBB0_69>

0000000000000548 <LBB0_63>:
     169:       16 02 0a 00 04 00 00 00 if w2 == 4 goto +10 <LBB0_67>
     170:       16 02 01 00 08 00 00 00 if w2 == 8 goto +1 <LBB0_68>
     171:       05 00 0b 00 00 00 00 00 goto +11 <LBB0_69>

0000000000000560 <LBB0_68>:
     172:       18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll
     174:       79 11 08 00 00 00 00 00 r1 = *(u64 *)(r1 + 8)
; BYTE_OFFSET relo here w/ WRONG size        ^^^^^^^^^^^^^^^^
     175:       05 00 07 00 00 00 00 00 goto +7 <LBB0_69>

0000000000000580 <LBB0_65>:
     176:       18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll
     178:       71 11 08 00 00 00 00 00 r1 = *(u8 *)(r1 + 8)
; BYTE_OFFSET relo here w/ WRONG size        ^^^^^^^^^^^^^^^^
     179:       05 00 03 00 00 00 00 00 goto +3 <LBB0_69>

00000000000005a0 <LBB0_67>:
     180:       18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll
     182:       61 11 08 00 00 00 00 00 r1 = *(u32 *)(r1 + 8)
; BYTE_OFFSET relo here w/ RIGHT size        ^^^^^^^^^^^^^^^^

00000000000005b8 <LBB0_69>:
     183:       67 01 00 00 20 00 00 00 r1 <<= 32
     184:       b7 02 00 00 00 00 00 00 r2 = 0
     185:       16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71>
     186:       c7 01 00 00 20 00 00 00 r1 s>>= 32
     187:       05 00 01 00 00 00 00 00 goto +1 <LBB0_72>

00000000000005e0 <LBB0_71>:
     188:       77 01 00 00 20 00 00 00 r1 >>= 32

AFTER
=====

 #30: core_reloc: insn #132 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32
 #31: core_reloc: insn #134 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32

     129:       18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll
     131:       7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1
     132:       b7 01 00 00 08 00 00 00 r1 = 8
; BYTE_OFFSET relo here                     ^^^
; no size check for non-memory dereferencing instructions
     133:       0f 12 00 00 00 00 00 00 r2 += r1
     134:       b7 03 00 00 04 00 00 00 r3 = 4
; BYTE_SIZE relocation here                 ^^^
     135:       66 03 05 00 03 00 00 00 if w3 s> 3 goto +5 <LBB0_63>
     136:       16 03 09 00 01 00 00 00 if w3 == 1 goto +9 <LBB0_65>
     137:       16 03 01 00 02 00 00 00 if w3 == 2 goto +1 <LBB0_66>
     138:       05 00 0a 00 00 00 00 00 goto +10 <LBB0_69>

0000000000000458 <LBB0_66>:
     139:       69 21 00 00 00 00 00 00 r1 = *(u16 *)(r2 + 0)
; NO CO-RE relocation here                   ^^^^^^^^^^^^^^^^
     140:       05 00 08 00 00 00 00 00 goto +8 <LBB0_69>

0000000000000468 <LBB0_63>:
     141:       16 03 06 00 04 00 00 00 if w3 == 4 goto +6 <LBB0_67>
     142:       16 03 01 00 08 00 00 00 if w3 == 8 goto +1 <LBB0_68>
     143:       05 00 05 00 00 00 00 00 goto +5 <LBB0_69>

0000000000000480 <LBB0_68>:
     144:       79 21 00 00 00 00 00 00 r1 = *(u64 *)(r2 + 0)
; NO CO-RE relocation here                   ^^^^^^^^^^^^^^^^
     145:       05 00 03 00 00 00 00 00 goto +3 <LBB0_69>

0000000000000490 <LBB0_65>:
     146:       71 21 00 00 00 00 00 00 r1 = *(u8 *)(r2 + 0)
; NO CO-RE relocation here                   ^^^^^^^^^^^^^^^^
     147:       05 00 01 00 00 00 00 00 goto +1 <LBB0_69>

00000000000004a0 <LBB0_67>:
     148:       61 21 00 00 00 00 00 00 r1 = *(u32 *)(r2 + 0)
; NO CO-RE relocation here                   ^^^^^^^^^^^^^^^^

00000000000004a8 <LBB0_69>:
     149:       67 01 00 00 20 00 00 00 r1 <<= 32
     150:       b7 02 00 00 00 00 00 00 r2 = 0
     151:       16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71>
     152:       c7 01 00 00 20 00 00 00 r1 s>>= 32
     153:       05 00 01 00 00 00 00 00 goto +1 <LBB0_72>

00000000000004d0 <LBB0_71>:
     154:       77 01 00 00 20 00 00 00 r1 >>= 323

Fixes: ee26dade0e ("libbpf: Add support for relocatable bitfields")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Lorenz Bauer <lmb@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210426192949.416837-4-andrii@kernel.org
2021-04-26 18:37:13 -07:00
Andrii Nakryiko 6709a914c8 libbpf: Support BTF_KIND_FLOAT during type compatibility checks in CO-RE
Add BTF_KIND_FLOAT support when doing CO-RE field type compatibility check.
Without this, relocations against float/double fields will fail.

Also adjust one error message to emit instruction index instead of less
convenient instruction byte offset.

Fixes: 22541a9eeb ("libbpf: Add BTF_KIND_FLOAT support")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Lorenz Bauer <lmb@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210426192949.416837-3-andrii@kernel.org
2021-04-26 18:37:13 -07:00
Andrii Nakryiko 7a2fa70aaf selftests/bpf: Add remaining ASSERT_xxx() variants
Add ASSERT_TRUE/ASSERT_FALSE for conditions calculated with custom logic to
true/false. Also add remaining arithmetical assertions:
  - ASSERT_LE -- less than or equal;
  - ASSERT_GT -- greater than;
  - ASSERT_GE -- greater than or equal.
This should cover most scenarios where people fall back to error-prone
CHECK()s.

Also extend ASSERT_ERR() to print out errno, in addition to direct error.

Also convert few CHECK() instances to ensure new ASSERT_xxx() variants work as
expected. Subsequent patch will also use ASSERT_TRUE/ASSERT_FALSE more
extensively.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Lorenz Bauer <lmb@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210426192949.416837-2-andrii@kernel.org
2021-04-26 18:37:13 -07:00
Linus Torvalds 4a0225c3d2 spi: Updates for v5.13
The only core work for SPI this time around is the completion of the
 conversion to the new style method for specifying transfer delays,
 meaning we can cope with what most controllers support more directly
 using conversions in the core rather than open coding in drivers.
 Otherwise it's a good stack of cleanups and fixes plus a few new
 drivers.
 
 The conversion to new style transfer delay will cause an issue with a
 newly added staging driver which has a straightforward resolution in
 -next.
 
  - Completion of the conversion to new style transfer delay
    configuration.
  - Introduction and use of module_parport_driver() helper, merged here
    as there's no parport tree.
  - Support for Altera SoCs on DFL buses, NXP i.MX8DL, HiSilicon Kunpeng,
    MediaTek MT8195,
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmCG0FYACgkQJNaLcl1U
 h9BXlAf/ZQaU8Nq4NY2jgjzjUoplF4qSFvCZ05CXqfYftaAOp06AmoOwNuNTz2gU
 Fkxouuw3D0hNmaeVusF1PaRjIvJCu+RO68EDrzTJlcFytyC8CxWSDE4Yw6ytOBUM
 OWZdVXsuw0CUk3VRJl2ycCooeTyKaCksfkVucocZAoyexcfQrFpxkOCUbA8hVM43
 Hghzb8HWAZUerrfwreSwfvyVMralR3rqqbZFKgSgT/sRM3zpaR4sctIkNgKKEbFE
 eRPRfBIWWZdJtjQ+uifFAc3jJHeZlmNXuQq3C+ETd2vQDFlymTxj+U3u74ieZxrm
 c6V4u4R3+Qx9qONV/q0LV6E4sBSvdw==
 =cBUy
 -----END PGP SIGNATURE-----

Merge tag 'spi-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "The only core work for SPI this time around is the completion of the
  conversion to the new style method for specifying transfer delays,
  meaning we can cope with what most controllers support more directly
  using conversions in the core rather than open coding in drivers.

  Otherwise it's a good stack of cleanups and fixes plus a few new
  drivers.

  Summary:

   - Completion of the conversion to new style transfer delay
     configuration

   - Introduction and use of module_parport_driver() helper, merged here
     as there's no parport tree

   - Support for Altera SoCs on DFL buses, NXP i.MX8DL, HiSilicon
     Kunpeng, MediaTek MT8195"

* tag 'spi-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (113 commits)
  spi: Rename enable1 to activate in spi_set_cs()
  spi: Convert Freescale QSPI binding to json schema
  spi: stm32-qspi: fix debug format string
  spi: tools: make a symbolic link to the header file spi.h
  spi: fsi: add a missing of_node_put
  spi: Make error handling of gpiod_count() call cleaner
  spidev: Add Micron SPI NOR Authenta device compatible
  spi: brcm,spi-bcm-qspi: convert to the json-schema
  spi: altera: Add DFL bus driver for Altera API Controller
  spi: altera: separate core code from platform code
  spi: stm32-qspi: Fix compilation warning in ARM64
  spi: Handle SPI device setup callback failure.
  spi: sync up initial chipselect state
  spi: stm32-qspi: Add dirmap support
  spi: stm32-qspi: Trigger DMA only if more than 4 bytes to transfer
  spi: stm32-qspi: fix pm_runtime usage_count counter
  spi: spi-zynqmp-gqspi: return -ENOMEM if dma_map_single fails
  spi: spi-zynqmp-gqspi: fix use-after-free in zynqmp_qspi_exec_op
  spi: spi-zynqmp-gqspi: Resolved slab-out-of-bounds bug
  spi: spi-zynqmp-gqspi: fix hang issue when suspend/resume
  ...
2021-04-26 16:32:11 -07:00
Linus Torvalds 5469f160e6 Power management updates for 5.13-rc1
- Add idle states table for IceLake-D to the intel_idle driver and
    update IceLake-X C6 data in it (Artem Bityutskiy).
 
  - Fix the C7 idle state on Tegra114 in the tegra cpuidle driver and
    drop the unused do_idle() firmware call from it (Dmitry Osipenko).
 
  - Fix cpuidle-qcom-spm Kconfig entry (He Ying).
 
  - Fix handling of possible negative tick_nohz_get_next_hrtimer()
    return values of in cpuidle governors (Rafael Wysocki).
 
  - Add support for frequency-invariance to the ACPI CPPC cpufreq
    driver and update the frequency-invariance engine (FIE) to use it
    as needed (Viresh Kumar).
 
  - Simplify the default delay_us setting in the ACPI CPPC cpufreq
    driver (Tom Saeger).
 
  - Clean up frequency-related computations in the intel_pstate
    cpufreq driver (Rafael Wysocki).
 
  - Fix TBG parent setting for load levels in the armada-37xx
    cpufreq driver and drop the CPU PM clock .set_parent method for
    armada-37xx (Marek Behún).
 
  - Fix multiple issues in the armada-37xx cpufreq driver (Pali Rohár).
 
  - Fix handling of dev_pm_opp_of_cpumask_add_table() return values
    in cpufreq-dt to take the -EPROBE_DEFER one into acconut as
    appropriate (Quanyang Wang).
 
  - Fix format string in ia64-acpi-cpufreq (Sergei Trofimovich).
 
  - Drop the unused for_each_policy() macro from cpufreq (Shaokun
    Zhang).
 
  - Simplify computations in the schedutil cpufreq governor to avoid
    unnecessary overhead (Yue Hu).
 
  - Fix typos in the s5pv210 cpufreq driver (Bhaskar Chowdhury).
 
  - Fix cpufreq documentation links in Kconfig (Alexander Monakov).
 
  - Fix PCI device power state handling in pci_enable_device_flags()
    to avoid issuse in some cases when the device depends on an ACPI
    power resource (Rafael Wysocki).
 
  - Add missing documentation of pm_runtime_resume_and_get() (Alan
    Stern).
 
  - Add missing static inline stub for pm_runtime_has_no_callbacks()
    to pm_runtime.h and drop the unused try_to_freeze_nowarn()
    definition (YueHaibing).
 
  - Drop duplicate struct device declaration from pm.h and fix a
    structure type declaration in intel_rapl.h (Wan Jiabing).
 
  - Use dev_set_name() instead of an open-coded equivalent of it in
    the wakeup sources code and drop a redundant local variable
    initialization from it (Andy Shevchenko, Colin Ian King).
 
  - Use crc32 instead of md5 for e820 memory map integrity check
    during resume from hibernation on x86 (Chris von Recklinghausen).
 
  - Fix typos in comments in the system-wide and hibernation support
    code (Lu Jialin).
 
  - Modify the generic power domains (genpd) code to avoid resuming
    devices in the "prepare" phase of system-wide suspend and
    hibernation (Ulf Hansson).
 
  - Add Hygon Fam18h RAPL support to the intel_rapl power capping
    driver (Pu Wen).
 
  - Add MAINTAINERS entry for the dynamic thermal power management
    (DTPM) code (Daniel Lezcano).
 
  - Add devm variants of operating performance points (OPP) API
    functions and switch over some users of the OPP framework to
    the new resource-managed API (Yangtao Li and Dmitry Osipenko).
 
  - Update devfreq core:
 
    * Register devfreq devices as cooling devices on demand (Daniel
      Lezcano).
 
    * Add missing unlock opeation in devfreq_add_device() (Lukasz
      Luba).
 
    * Use the next frequency as resume_freq instead of the previous
      frequency when using the opp-suspend property (Dong Aisheng).
 
    * Check get_dev_status in devfreq_update_stats() (Dong Aisheng).
 
    * Fix set_freq path for the userspace governor in Kconfig (Dong
      Aisheng).
 
    * Remove invalid description of get_target_freq() (Dong Aisheng).
 
  - Update devfreq drivers:
 
    * imx8m-ddrc: Remove imx8m_ddrc_get_dev_status() and unneeded
      of_match_ptr() (Dong Aisheng, Fabio Estevam).
 
    * rk3399_dmc: dt-bindings: Add rockchip,pmu phandle and drop
      references to undefined symbols (Enric Balletbo i Serra, Gaël
      PORTAY).
 
    * rk3399_dmc: Use dev_err_probe() to simplify the code (Krzysztof
      Kozlowski).
 
    * imx-bus: Remove unneeded of_match_ptr() (Fabio Estevam).
 
  - Fix kernel-doc warnings in three places (Pierre-Louis Bossart).
 
  - Fix typo in the pm-graph utility code (Ricardo Ribalda).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmCHAUISHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxAxMP/0tFjgxeaJ3chYaiqoPlk2QX/XdwqJvm
 8OOu2qBMWbt2bubcIlAPpdlCNaERI4itF7E8za7t9alswdq7YPWGmNR9snCXUKhD
 BzERuicZTeOcCk2P3DTgzLVc4EzF6wutA3lTdYYZIpf+LuuB+guG8zgMzScRHIsM
 N3I83O+iLTA9ifIqN0/wH//a0ISvo6rSWtcbx+48d5bYvYixW7CsBmoxWHhGiYsw
 4PJ4AzbdNJEhQp91SBYPIAmqwV88FZUPoYnRazXMxOSevMewhP9JuCHXAujC3gLV
 l5d2TBaBV4EBYLD5tfCpJvHMXhv/yBpg6KRivjri+zEnY1TAqIlfR4vYiL7puVvQ
 PdwjyvNFDNGyUSX/AAwYF6F4WCtIhw8hCahw6Dw2zcDz0plFdRZmWAiTdmIjECJK
 8EvwJNlmdl27G1y+EBc6NnwzEFZQwiu9F5bUHUkmc3fF1M1aFTza8WDNDo30TC94
 94c+uVBRL2fBePl4FfGZATfJbOMb8+vDIkroQxrIjQDT/7Ha3Mz75JZDRHItZo92
 +4fES2eFdfZISCLIQMBY5TeXox3O8qsirC1k4qELwy71gPUE9CpP3FkxKIvyZLlv
 +6fS9ttpUfyFBF7gqrEy+ziVk1Rm4oorLmWCtthz4xyerzj5+vtZQqKzcySk0GA5
 hYkseZkedR6y
 =t+SG
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These add some new hardware support (for example, IceLake-D idle
  states in intel_idle), fix some issues (for example, the handling of
  negative "sleep length" values in cpuidle governors), add new
  functionality to the existing drivers (for example, scale-invariance
  support in the ACPI CPPC cpufreq driver) and clean up code all over.

  Specifics:

   - Add idle states table for IceLake-D to the intel_idle driver and
     update IceLake-X C6 data in it (Artem Bityutskiy).

   - Fix the C7 idle state on Tegra114 in the tegra cpuidle driver and
     drop the unused do_idle() firmware call from it (Dmitry Osipenko).

   - Fix cpuidle-qcom-spm Kconfig entry (He Ying).

   - Fix handling of possible negative tick_nohz_get_next_hrtimer()
     return values of in cpuidle governors (Rafael Wysocki).

   - Add support for frequency-invariance to the ACPI CPPC cpufreq
     driver and update the frequency-invariance engine (FIE) to use it
     as needed (Viresh Kumar).

   - Simplify the default delay_us setting in the ACPI CPPC cpufreq
     driver (Tom Saeger).

   - Clean up frequency-related computations in the intel_pstate cpufreq
     driver (Rafael Wysocki).

   - Fix TBG parent setting for load levels in the armada-37xx cpufreq
     driver and drop the CPU PM clock .set_parent method for armada-37xx
     (Marek Behún).

   - Fix multiple issues in the armada-37xx cpufreq driver (Pali Rohár).

   - Fix handling of dev_pm_opp_of_cpumask_add_table() return values in
     cpufreq-dt to take the -EPROBE_DEFER one into acconut as
     appropriate (Quanyang Wang).

   - Fix format string in ia64-acpi-cpufreq (Sergei Trofimovich).

   - Drop the unused for_each_policy() macro from cpufreq (Shaokun
     Zhang).

   - Simplify computations in the schedutil cpufreq governor to avoid
     unnecessary overhead (Yue Hu).

   - Fix typos in the s5pv210 cpufreq driver (Bhaskar Chowdhury).

   - Fix cpufreq documentation links in Kconfig (Alexander Monakov).

   - Fix PCI device power state handling in pci_enable_device_flags() to
     avoid issuse in some cases when the device depends on an ACPI power
     resource (Rafael Wysocki).

   - Add missing documentation of pm_runtime_resume_and_get() (Alan
     Stern).

   - Add missing static inline stub for pm_runtime_has_no_callbacks() to
     pm_runtime.h and drop the unused try_to_freeze_nowarn() definition
     (YueHaibing).

   - Drop duplicate struct device declaration from pm.h and fix a
     structure type declaration in intel_rapl.h (Wan Jiabing).

   - Use dev_set_name() instead of an open-coded equivalent of it in the
     wakeup sources code and drop a redundant local variable
     initialization from it (Andy Shevchenko, Colin Ian King).

   - Use crc32 instead of md5 for e820 memory map integrity check during
     resume from hibernation on x86 (Chris von Recklinghausen).

   - Fix typos in comments in the system-wide and hibernation support
     code (Lu Jialin).

   - Modify the generic power domains (genpd) code to avoid resuming
     devices in the "prepare" phase of system-wide suspend and
     hibernation (Ulf Hansson).

   - Add Hygon Fam18h RAPL support to the intel_rapl power capping
     driver (Pu Wen).

   - Add MAINTAINERS entry for the dynamic thermal power management
     (DTPM) code (Daniel Lezcano).

   - Add devm variants of operating performance points (OPP) API
     functions and switch over some users of the OPP framework to the
     new resource-managed API (Yangtao Li and Dmitry Osipenko).

   - Update devfreq core:

      * Register devfreq devices as cooling devices on demand (Daniel
        Lezcano).

      * Add missing unlock opeation in devfreq_add_device() (Lukasz
        Luba).

      * Use the next frequency as resume_freq instead of the previous
        frequency when using the opp-suspend property (Dong Aisheng).

      * Check get_dev_status in devfreq_update_stats() (Dong Aisheng).

      * Fix set_freq path for the userspace governor in Kconfig (Dong
        Aisheng).

      * Remove invalid description of get_target_freq() (Dong Aisheng).

   - Update devfreq drivers:

      * imx8m-ddrc: Remove imx8m_ddrc_get_dev_status() and unneeded
        of_match_ptr() (Dong Aisheng, Fabio Estevam).

      * rk3399_dmc: dt-bindings: Add rockchip,pmu phandle and drop
        references to undefined symbols (Enric Balletbo i Serra, Gaël
        PORTAY).

      * rk3399_dmc: Use dev_err_probe() to simplify the code (Krzysztof
        Kozlowski).

      * imx-bus: Remove unneeded of_match_ptr() (Fabio Estevam).

   - Fix kernel-doc warnings in three places (Pierre-Louis Bossart).

   - Fix typo in the pm-graph utility code (Ricardo Ribalda)"

* tag 'pm-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits)
  PM: wakeup: remove redundant assignment to variable retval
  PM: hibernate: x86: Use crc32 instead of md5 for hibernation e820 integrity check
  cpufreq: Kconfig: fix documentation links
  PM: wakeup: use dev_set_name() directly
  PM: runtime: Add documentation for pm_runtime_resume_and_get()
  cpufreq: intel_pstate: Simplify intel_pstate_update_perf_limits()
  cpufreq: armada-37xx: Fix module unloading
  cpufreq: armada-37xx: Remove cur_frequency variable
  cpufreq: armada-37xx: Fix determining base CPU frequency
  cpufreq: armada-37xx: Fix driver cleanup when registration failed
  clk: mvebu: armada-37xx-periph: Fix workaround for switching from L1 to L0
  clk: mvebu: armada-37xx-periph: Fix switching CPU freq from 250 Mhz to 1 GHz
  cpufreq: armada-37xx: Fix the AVS value for load L1
  clk: mvebu: armada-37xx-periph: remove .set_parent method for CPU PM clock
  cpufreq: armada-37xx: Fix setting TBG parent for load levels
  cpuidle: Fix ARM_QCOM_SPM_CPUIDLE configuration
  cpuidle: tegra: Remove do_idle firmware call
  cpuidle: tegra: Fix C7 idling state on Tegra114
  PM: sleep: fix typos in comments
  cpufreq: Remove unused for_each_policy macro
  ...
2021-04-26 15:10:25 -07:00
Linus Torvalds d8f9176b4e ACPI updates for 5.13-rc1
- Update ACPICA code in the kernel to upstream revision 20210331
    including the following changes:
 
    * Add parsing for IVRS IVHD 40h and device entry F0h (Alexander
      Monakov).
 
    * Add new CEDT table for CXL 2.0 and iASL support for it (Ben
      Widawsky, Bob Moore).
 
    * NFIT: add Location Cookie field (Bob Moore).
 
    * HMAT: add new fields/flags (Bob Moore).
 
    * Add new flags in SRAT (Bob Moore).
 
    * PMTT: add new fields/structures (Bob Moore).
 
    * Add CSI2Bus resource template (Bob Moore).
 
    * iASL: Decode subtable type field for VIOT (Bob Moore).
 
    * Fix various typos and spelling mistakes (Colin Ian King).
 
    * Add new predefined objects _BPC, _BPS, and _BPT (Erik Kaneda).
 
    * Add USB4 capabilities UUID (Erik Kaneda).
 
    * Add CXL ACPI device ID and _CBR object (Erik Kaneda).
 
    * MADT: add Multiprocessor Wakeup Structure (Erik Kaneda).
 
    * PCCT: add support for subtable type 5 (Erik Kaneda).
 
    * PPTT: add new version of subtable type 1 (Erik Kaneda).
 
    * Add SDEV secure access components (Erik Kaneda).
 
    * Add support for PHAT table (Erik Kaneda).
 
    * iASL: Add definitions for the VIOT table (Jean-Philippe Brucker).
 
    * acpisrc: Add missing conversion for VIOT support (Jean-Philippe
      Brucker).
 
    * IORT: Updates for revision E.b (Shameer Kolothum).
 
  - Rearrange message printing in ACPI-related code to avoid using the
    ACPICA's internal message printing macros outside ACPICA and do
    some related code cleanups (Rafael Wysocki).
 
  - Modify the device enumeration code to turn off all of the unused
    ACPI power resources at the end (Rafael Wysocki).
 
  - Change the ACPI power resources handling code to turn off unused
    ACPI power resources without checking their status which should
    not be necessary by the spec (Rafael Wysocki).
 
  - Add empty stubs for CPPC-related functions to be used when
    CONFIG_ACPI_CPPC_LIB is not set (Rafael Wysocki).
 
  - Simplify device enumeration code (Rafael Wysocki).
 
  - Change device enumeration code to use match_string() for string
    matching (Andy Shevchenko).
 
  - Modify irqresource_disabled() to retain the resouce flags that
    have been set already (Angela Czubak).
 
  - Add native backlight whitelist entry for GA401/GA502/GA503 (Luke
    Jones).
 
  - Modify the ACPI backlight driver to let the native backlight
    handling take over on hardware-reduced systems (Hans de Goede).
 
  - Introduce acpi_dev_get() and switch over the ACPI core code to
    using it (Andy Shevchenko).
 
  - Use kobj_attribute as callback argument instead of a local struct
    type in the CPPC linrary code (Nathan Chancellor).
 
  - Drop unneeded initializatio of a static variable from the ACPI
    processor driver (Tian Tao).
 
  - Drop unnecessary local variable assignment from the ACPI APEI
    code (Colin Ian King).
 
  - Document for_each_acpi_dev_match() macro (Andy Shevchenko).
 
  - Address assorted coding style issues in multiple places (Xiaofei
    Tan).
 
  - Capitalize TLAs in a few comments (Andy Shevchenko).
 
  - Correct assorted typos in comments (Tom Saeger).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmCHAL8SHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxZroQAIdFsRUTKmm8st9sdfEtF3QHLS3/EV2x
 1GlkL+3yE/WuEFXNd0mAv0MTcV2sNMKGd5oz74zLkciPC2dNR4168Ni6DhGSoELM
 0ZMOAu9E12Nyq7/1FdWalLQprtR8OuLVwgC2VckK+f//4vzpZ+6PtGMwAwtImSHK
 m3WRPimVbgOVJ1UWZjsfIm7kLBD4o4oCx0pdeEl77q0oQKmMdcByUh2YnjwKzFnP
 9zqV+SCi3HL4w67HO/uMe7x8isNyWONYXVqOvOkgXi7PeoX9v0XiWSCJ0KnAvbI1
 PZokJT8pTrKnFyL3zJS6pU/ZHj7ikFiTc+MfyyPcYRJZ5nBvRjqHKoPOtZ9yfU6n
 jgt/u3REhqwnHy0ikS8HsP+PWnAJF1Re3sNVvIMnX6XxTIndHCXZEoeldfeC23S9
 PmzGA0//iPngiYaOVM5BxIjRi2nRBHlVvzSIACICXDcszA81RHePFIzfjUgW3elp
 v6kAhkrXYajqrDb7NuvY4MTuuBo8w3q2xWJGu5VlDkNOblM0AExRhXmvp1RW0kL7
 +mi5X6xBFEB9M6hEoWKnleaZTXTlFYBreKsMPEEP7N7a5+UZRPedcjX1PflCkOB3
 uL5p/+x3br1fkDyK0P7wFf3VqiBXuwFajEdCmyHnizpD6m0oWC6pv9PUGYUCneJ1
 JGH5X/3Uu33D
 =5fuB
 -----END PGP SIGNATURE-----

Merge tag 'acpi-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI updates from Rafael Wysocki:
 "These update the ACPICA code in the kernel to the most recent upstream
  revision including (but not limited to) new material introduced in the
  6.4 version of the spec, update message printing in the ACPI-related
  code, address a few issues and clean up code in a number of places.

  Specifics:

   - Update ACPICA code in the kernel to upstream revision 20210331
     including the following changes:

      * Add parsing for IVRS IVHD 40h and device entry F0h (Alexander
        Monakov).

      * Add new CEDT table for CXL 2.0 and iASL support for it (Ben
        Widawsky, Bob Moore).

      * NFIT: add Location Cookie field (Bob Moore).

      * HMAT: add new fields/flags (Bob Moore).

      * Add new flags in SRAT (Bob Moore).

      * PMTT: add new fields/structures (Bob Moore).

      * Add CSI2Bus resource template (Bob Moore).

      * iASL: Decode subtable type field for VIOT (Bob Moore).

      * Fix various typos and spelling mistakes (Colin Ian King).

      * Add new predefined objects _BPC, _BPS, and _BPT (Erik Kaneda).

      * Add USB4 capabilities UUID (Erik Kaneda).

      * Add CXL ACPI device ID and _CBR object (Erik Kaneda).

      * MADT: add Multiprocessor Wakeup Structure (Erik Kaneda).

      * PCCT: add support for subtable type 5 (Erik Kaneda).

      * PPTT: add new version of subtable type 1 (Erik Kaneda).

      * Add SDEV secure access components (Erik Kaneda).

      * Add support for PHAT table (Erik Kaneda).

      * iASL: Add definitions for the VIOT table (Jean-Philippe
        Brucker).

      * acpisrc: Add missing conversion for VIOT support (Jean-Philippe
        Brucker).

      * IORT: Updates for revision E.b (Shameer Kolothum).

   - Rearrange message printing in ACPI-related code to avoid using the
     ACPICA's internal message printing macros outside ACPICA and do
     some related code cleanups (Rafael Wysocki).

   - Modify the device enumeration code to turn off all of the unused
     ACPI power resources at the end (Rafael Wysocki).

   - Change the ACPI power resources handling code to turn off unused
     ACPI power resources without checking their status which should not
     be necessary by the spec (Rafael Wysocki).

   - Add empty stubs for CPPC-related functions to be used when
     CONFIG_ACPI_CPPC_LIB is not set (Rafael Wysocki).

   - Simplify device enumeration code (Rafael Wysocki).

   - Change device enumeration code to use match_string() for string
     matching (Andy Shevchenko).

   - Modify irqresource_disabled() to retain the resouce flags that have
     been set already (Angela Czubak).

   - Add native backlight whitelist entry for GA401/GA502/GA503 (Luke
     Jones).

   - Modify the ACPI backlight driver to let the native backlight
     handling take over on hardware-reduced systems (Hans de Goede).

   - Introduce acpi_dev_get() and switch over the ACPI core code to
     using it (Andy Shevchenko).

   - Use kobj_attribute as callback argument instead of a local struct
     type in the CPPC linrary code (Nathan Chancellor).

   - Drop unneeded initializatio of a static variable from the ACPI
     processor driver (Tian Tao).

   - Drop unnecessary local variable assignment from the ACPI APEI code
     (Colin Ian King).

   - Document for_each_acpi_dev_match() macro (Andy Shevchenko).

   - Address assorted coding style issues in multiple places (Xiaofei
     Tan).

   - Capitalize TLAs in a few comments (Andy Shevchenko).

   - Correct assorted typos in comments (Tom Saeger)"

* tag 'acpi-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (68 commits)
  ACPI: video: use native backlight for GA401/GA502/GA503
  ACPI: APEI: remove redundant assignment to variable rc
  ACPI: utils: Capitalize abbreviations in the comments
  ACPI: utils: Document for_each_acpi_dev_match() macro
  ACPI: bus: Introduce acpi_dev_get() and reuse it in ACPI code
  ACPI: scan: Utilize match_string() API
  resource: Prevent irqresource_disabled() from erasing flags
  ACPI: CPPC: Replace cppc_attr with kobj_attribute
  ACPI: scan: Call acpi_get_object_info() from acpi_set_pnp_ids()
  ACPI: scan: Drop sta argument from acpi_init_device_object()
  ACPI: scan: Drop sta argument from acpi_add_single_object()
  ACPI: scan: Rearrange checks in acpi_bus_check_add()
  ACPI: scan: Fold acpi_bus_type_and_status() into its caller
  ACPI: video: Check LCD flag on ACPI-reduced-hardware devices
  ACPI: utils: Add acpi_reduced_hardware() helper
  ACPI: dock: fix some coding style issues
  ACPI: sysfs: fix some coding style issues
  ACPI: PM: add a missed blank line after declarations
  ACPI: custom_method: fix a coding style issue
  ACPI: CPPC: fix some coding style issues
  ...
2021-04-26 15:03:23 -07:00
Linus Torvalds 2f9ef0559e It's been a relatively busy cycle in docsland, though more than usually
well contained to Documentation/ itself.  Highlights include:
 
  - The Chinese translators have been busy and show no signs of stopping
    anytime soon.  Italian has also caught up.
 
  - Aditya Srivastava has been working on improvements to the kernel-doc
    script.
 
  - Thorsten continues his work on reporting-issues.rst and related
    documentation around regression reporting.
 
  - Lots of documentation updates, typo fixes, etc. as usual
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmCG5moPHGNvcmJldEBs
 d24ubmV0AAoJEBdDWhNsDH5YCoUH/1q/O+IvS+JNkxneDxbB6OC799BQpabZHi7/
 HbYfgfX0nKrV3NAwIhigsIj6WHRE+5p2rKiHOuQxL3daJyfZSqQl0/yI0Ag7Of4g
 7y1FKBQrfqS6tJcyNckdtBfxYUQP9yCJY0xfIexkTNiujbmkMKDSJD7lKXd0AaTM
 styCvTbgTPTzadL5bIHj/GxJ9s8DsxO3y9LGdRc+GrNzPFliMYWlJgbR28zjEKBm
 UQzy7JGNBX3qTJwgjvv/myqRDy6MligvGrP+wG0KTnAHXKkvDFl3p46kPwzdk1JE
 +F5sbboUWh20GLYy9t4MZOcq38FUcEPlRPXkxsGNyA8co5ij8+g=
 =7db3
 -----END PGP SIGNATURE-----

Merge tag 'docs-5.13' of git://git.lwn.net/linux

Pull documentation updates from Jonathan Corbet:
 "It's been a relatively busy cycle in docsland, though more than
  usually well contained to Documentation/ itself. Highlights include:

   - The Chinese translators have been busy and show no signs of
     stopping anytime soon. Italian has also caught up.

   - Aditya Srivastava has been working on improvements to the
     kernel-doc script.

   - Thorsten continues his work on reporting-issues.rst and related
     documentation around regression reporting.

   - Lots of documentation updates, typo fixes, etc. as usual"

* tag 'docs-5.13' of git://git.lwn.net/linux: (139 commits)
  docs/zh_CN: add openrisc translation to zh_CN index
  docs/zh_CN: add openrisc index.rst translation
  docs/zh_CN: add openrisc todo.rst translation
  docs/zh_CN: add openrisc openrisc_port.rst translation
  docs/zh_CN: add core api translation to zh_CN index
  docs/zh_CN: add core-api index.rst translation
  docs/zh_CN: add core-api irq index.rst translation
  docs/zh_CN: add core-api irq irqflags-tracing.rst translation
  docs/zh_CN: add core-api irq irq-domain.rst translation
  docs/zh_CN: add core-api irq irq-affinity.rst translation
  docs/zh_CN: add core-api irq concepts.rst translation
  docs: sphinx-pre-install: don't barf on beta Sphinx releases
  scripts: kernel-doc: improve parsing for kernel-doc comments syntax
  docs/zh_CN: two minor fixes in zh_CN/doc-guide/
  Documentation: dev-tools: Add Testing Overview
  docs/zh_CN: add translations in zh_CN/dev-tools/gcov
  docs: reporting-issues: make people CC the regressions list
  MAINTAINERS: add regressions mailing list
  doc:it_IT: align Italian documentation
  docs/zh_CN: sync reporting-issues.rst
  ...
2021-04-26 13:22:43 -07:00
Linus Torvalds ef12441243 USB/Thunderbolt patches for 5.13-rc1
Here is the big set of USB and Thunderbolt driver updates for 5.13-rc1.
 
 Lots of little things in here, with loads of tiny fixes and cleanups
 over these drivers, as well as these "larger" changes:
 	- thunderbolt updates and new features added
 	- xhci driver updates and split out of a mediatek-specific xhci
 	  driver from the main xhci module to make it easier to work
 	  with (something that I have been wanting for a while).
 	- loads of typec feature additions and updates
 	- dwc2 driver updates
 	- dwc3 driver updates
 	- gadget driver fixes and minor updates
 	- loads of usb-serial cleanups and fixes and updates
 	- usbip documentation updates and fixes
 	- lots of other tiny USB driver updates
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYIa42A8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymMEACgkQBzLb5W/IocS+oq7+D7P3V581sAn1Dcy2Qq
 Yz370/X2hrjXAyIm7/Cz
 =5dj/
 -----END PGP SIGNATURE-----

Merge tag 'usb-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB and Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt driver updates for
  5.13-rc1.

  Lots of little things in here, with loads of tiny fixes and cleanups
  over these drivers, as well as these "larger" changes:

   - thunderbolt updates and new features added

   - xhci driver updates and split out of a mediatek-specific xhci
     driver from the main xhci module to make it easier to work with
     (something that I have been wanting for a while).

   - loads of typec feature additions and updates

   - dwc2 driver updates

   - dwc3 driver updates

   - gadget driver fixes and minor updates

   - loads of usb-serial cleanups and fixes and updates

   - usbip documentation updates and fixes

   - lots of other tiny USB driver updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (371 commits)
  usb: Fix up movement of USB core kerneldoc location
  usb: dwc3: gadget: Handle DEV_TXF_FLUSH_BYPASS capability
  usb: dwc3: Capture new capability register GHWPARAMS9
  usb: gadget: prevent a ternary sign expansion bug
  usb: dwc3: core: Do core softreset when switch mode
  usb: dwc2: Get rid of useless error checks in suspend interrupt
  usb: dwc2: Update dwc2_handle_usb_suspend_intr function.
  usb: dwc2: Add exit hibernation mode before removing drive
  usb: dwc2: Add hibernation exiting flow by system resume
  usb: dwc2: Add hibernation entering flow by system suspend
  usb: dwc2: Allow exit hibernation in urb enqueue
  usb: dwc2: Move exit hibernation to dwc2_port_resume() function
  usb: dwc2: Move enter hibernation to dwc2_port_suspend() function
  usb: dwc2: Clear GINTSTS_RESTOREDONE bit after restore is generated.
  usb: dwc2: Clear fifo_map when resetting core.
  usb: dwc2: Allow exiting hibernation from gpwrdn rst detect
  usb: dwc2: Fix hibernation between host and device modes.
  usb: dwc2: Fix host mode hibernation exit with remote wakeup flow.
  usb: dwc2: Reset DEVADDR after exiting gadget hibernation.
  usb: dwc2: Update exit hibernation when port reset is asserted
  ...
2021-04-26 11:32:23 -07:00
Linus Torvalds 8900d92fd6 Staging/IIO driver updates for 5.13-rc1
Here is the big set of staging and IIO driver updates for 5.13-rc1.
 
 Lots of little churn in here, and some larger churn as well.  Major
 things are:
 	- removal of wimax drivers, no one has this hardware anymore for
 	  this failed "experiment".
 	- removal of the Google gasket driver, turns out no one wanted
 	  to maintain it or cares about it anymore, so they asked for it
 	  to be removed.
 	- comedi finally moves out of the staging directory into
 	  drivers/comedi/  This is one of the oldest kernel subsystems
 	  around, being created in the 2.0 kernel days, and was one of
 	  the first things added to drivers/staging/ when that was
 	  created over 15 years ago.  It should have been moved out of
 	  staging a long time ago, it's well maintained and used by
 	  loads of different devices in the real world every day.  Nice
 	  to see this finally happen.
 	- so many tiny coding style cleanups it's not funny.  Perfect
 	  storm of at least 2 different intern project application
 	  deadlines combined to provide a huge number of new
 	  contributions in this area from people learning how to do
 	  kernel development.  Great job to everyone involved here.
 
 There's also the normal updates for IIO drivers with new IIO drivers and
 updates all over that subsystem.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYIa1zw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykfMACgq/Qj9n6NO/P4BX55XWjRkjOmxxwAoKrYEWkG
 fIdLmhh4FGWkxaJO3Izf
 =PCXb
 -----END PGP SIGNATURE-----

Merge tag 'staging-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging/IIO driver updates from Greg KH:
 "Here is the big set of staging and IIO driver updates for 5.13-rc1.

  Lots of little churn in here, and some larger churn as well. Major
  things are:

   - removal of wimax drivers, no one has this hardware anymore for this
     failed "experiment".

   - removal of the Google gasket driver, turns out no one wanted to
     maintain it or cares about it anymore, so they asked for it to be
     removed.

   - comedi finally moves out of the staging directory into drivers/comedi

     This is one of the oldest kernel subsystems around, being created
     in the 2.0 kernel days, and was one of the first things added to
     drivers/staging/ when that was created over 15 years ago.

     It should have been moved out of staging a long time ago, it's well
     maintained and used by loads of different devices in the real world
     every day. Nice to see this finally happen.

   - so many tiny coding style cleanups it's not funny.

     Perfect storm of at least 2 different intern project application
     deadlines combined to provide a huge number of new contributions in
     this area from people learning how to do kernel development. Great
     job to everyone involved here.

  There's also the normal updates for IIO drivers with new IIO drivers
  and updates all over that subsystem.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (907 commits)
  staging: octeon: Use 'for_each_child_of_node'
  Staging: rtl8723bs: rtw_xmit: fixed tabbing issue
  staging: rtl8188eu: remove unused function parameters
  staging: rtl8188eu: cmdThread is a task_struct
  staging: rtl8188eu: remove constant variable and dead code
  staging: rtl8188eu: change bLeisurePs' type to bool
  staging: rtl8723bs: remove empty #ifdef block
  staging: rtl8723bs: remove unused DBG_871X_LEVEL macro declarations
  staging: rtl8723bs: split too long line
  staging: rtl8723bs: fix indentation in if block
  staging: rtl8723bs: fix code indent issue
  staging: rtl8723bs: replace DBG_871X_LEVEL logs with netdev_*()
  staging: rtl8192e: indent statement properly
  staging: rtl8723bs: Remove led_blink_hdl() and everything related
  staging: comedi: move out of staging directory
  staging: rtl8723bs: remove sdio_drv_priv structure
  staging: rtl8723bs: remove unused argument in function
  staging: rtl8723bs: remove DBG_871X_SEL_NL macro declaration
  staging: rtl8723bs: replace DBG_871X_SEL_NL with netdev_dbg()
  staging: rtl8723bs: fix indentation issue introduced by long line split
  ...
2021-04-26 11:14:21 -07:00
Linus Torvalds c01c0716cc Driver core changes for 5.13-rc1
Here is the "big" set of driver core changes for 5.13-rc1.
 
 Nothing major, just lots of little core changes and cleanups, notable
 things are:
 	- finally set fw_devlink=on by default.  All reported issues
 	  with this have been shaken out over the past 9 months or so,
 	  but we will be paying attention to any fallout here in case we
 	  need to revert this as the default boot value (symptoms of
 	  problems are a simple lack of booting)
 	- fixes found to be needed by fw_devlink=on value in some
 	  subsystems (like clock).
 	- delayed work initialization cleanup
 	- driver core cleanups and minor updates
 	- software node cleanups and tweaks
 	- devtmpfs cleanups
 	- minor debugfs cleanups
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYIazPA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ylzUwCguQ+VUs1d0voq/oKiqR+lbXnQf3kAn0jf/eom
 ucRSdeIc21eEE83Ei9aZ
 =pchl
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the "big" set of driver core changes for 5.13-rc1.

  Nothing major, just lots of little core changes and cleanups, notable
  things are:

   - finally set 'fw_devlink=on' by default.

     All reported issues with this have been shaken out over the past 9
     months or so, but we will be paying attention to any fallout here
     in case we need to revert this as the default boot value (symptoms
     of problems are a simple lack of booting)

   - fixes found to be needed by fw_devlink=on value in some subsystems
     (like clock).

   - delayed work initialization cleanup

   - driver core cleanups and minor updates

   - software node cleanups and tweaks

   - devtmpfs cleanups

   - minor debugfs cleanups

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (53 commits)
  devm-helpers: Fix devm_delayed_work_autocancel() kerneldoc
  PM / wakeup: use dev_set_name() directly
  software node: Allow node addition to already existing device
  kunit: software node: adhear to KUNIT formatting standard
  node: fix device cleanups in error handling code
  kobject_uevent: remove warning in init_uevent_argv()
  debugfs: Make debugfs_allow RO after init
  Revert "driver core: platform: Make platform_get_irq_optional() optional"
  media: ipu3-cio2: Switch to use SOFTWARE_NODE_REFERENCE()
  software node: Introduce SOFTWARE_NODE_REFERENCE() helper macro
  software node: Imply kobj_to_swnode() to be no-op
  software node: Deduplicate code in fwnode_create_software_node()
  software node: Introduce software_node_alloc()/software_node_free()
  software node: Free resources explicitly when swnode_register() fails
  debugfs: drop pointless nul-termination in debugfs_read_file_bool()
  driver core: add helper for deferred probe reason setting
  driver core: Improve fw_devlink & deferred_probe_timeout interaction
  of: property: fw_devlink: Add support for remote-endpoint
  driver core: platform: Make platform_get_irq_optional() optional
  driver core: Replace printf() specifier and drop unneeded casting
  ...
2021-04-26 11:05:36 -07:00
Linus Torvalds 90035c28f1 platform-drivers-x86 for v5.13-1
Highlights:
  - Lots of Microsoft Surface work
  - platform-profile support for HP and Microsoft Surface devices
  - New WMI Gigabyte motherboard temperature monitoring driver
  - Intel PMC improvements for Tiger Lake and Alder Lake
  - Misc. bugfixes, improvements and quirk additions all over
 
 The following is an automated git shortlog grouped by driver:
 
 Add support for DYTC MMC_GET BIOS API.:
  - Add support for DYTC MMC_GET BIOS API.
 
 Adjust Dell drivers to a personal email address:
  - Adjust Dell drivers to a personal email address
 
 Fix typo in Kconfig:
  - Fix typo in Kconfig
 
 ISST:
  -  Account for increased timeout in some cases
 
 MAINTAINERS:
  -  Add missing section for alienware-wmi driver
  -  Adjust Dell drivers to email alias
  -  update MELLANOX HARDWARE PLATFORM SUPPORT maintainers
 
 Merge tag 'ib-mfd-platform-x86-v5.13' into review-hans:
  - Merge tag 'ib-mfd-platform-x86-v5.13' into review-hans
 
 Merge tag 'irq-no-autoen-2021-03-25' into review-hans:
  - Merge tag 'irq-no-autoen-2021-03-25' into review-hans
 
 Typo fix in the file classmate-laptop.c:
  - Typo fix in the file classmate-laptop.c
 
 add Gigabyte WMI temperature driver:
  - add Gigabyte WMI temperature driver
 
 add support for Advantech software defined button:
  - add support for Advantech software defined button
 
 asus-laptop:
  -  fix kobj_to_dev.cocci warnings
 
 asus-wmi:
  -  Add param to turn fn-lock mode on by default
 
 dell-wmi-sysman:
  -  Make init_bios_attributes() ACPI object parsing more robust
  -  Cleanup create_attributes_level_sysfs_files()
  -  Make sysman_init() return -ENODEV of the interfaces are not found
  -  Cleanup sysman_init() error-exit handling
  -  Fix release_attributes_data() getting called twice on init_bios_attributes() failure
  -  Make it safe to call exit_foo_attributes() multiple times
  -  Fix possible NULL pointer deref on exit
  -  Fix crash caused by calling kset_unregister twice
 
 docs:
  -  driver-api: Add Surface DTX driver documentation
 
 genirq:
  -  Add IRQF_NO_AUTOEN for request_irq/nmi()
 
 gigabyte-wmi:
  -  add support for B550M AORUS PRO-P
  -  add X570 AORUS ELITE
 
 hp-wmi:
  -  add platform profile support
  -  rename "thermal policy" to "thermal profile"
 
 intel-hid:
  -  Fix spurious wakeups caused by tablet-mode events during suspend
  -  Support Lenovo ThinkPad X1 Tablet Gen 2
 
 intel-vbtn:
  -  Remove unused KEYMAP_LEN define
  -  Stop reporting SW_DOCK events
 
 intel_chtdc_ti_pwrbtn:
  -  Fix missing IRQF_ONESHOT as only threaded handler
 
 intel_pmc_core:
  -  Uninitialized data in pmc_core_lpm_latch_mode_write()
  -  add ACPI dependency
  -  Fix "unsigned 'ret' is never less than zero" smatch warning
  -  Add support for Alder Lake PCH-P
  -  Add LTR registers for Tiger Lake
  -  Add option to set/clear LPM mode
  -  Add requirements file to debugfs
  -  Get LPM requirements for Tiger Lake
  -  Show LPM residency in microseconds
  -  Handle sub-states generically
  -  Remove global struct pmc_dev
  -  Don't use global pmcdev in quirks
  -  export platform global reset bits via etr3 sysfs file
  -  Ignore GBE LTR on Tiger Lake platforms
  -  Update Kconfig
 
 intel_pmt_class:
  -  Initial resource to 0
 
 intel_pmt_crashlog:
  -  Fix incorrect macros
 
 mfd:
  -  intel_pmt: Add support for DG1
  -  intel_pmt: Fix nuisance messages and handling of disabled capabilities
 
 panasonic-laptop:
  -  remove redundant assignment of variable result
 
 platform:
  -  x86: ACPI: Get rid of ACPICA message printing
 
 platform/mellanox:
  -  mlxreg-hotplug: move to use request_irq by IRQF_NO_AUTOEN flag
  -  Typo fix in the file mlxbf-bootctl.c
 
 platform/surface:
  -  aggregator: fix a bit test
  -  aggregator: move to use request_irq by IRQF_NO_AUTOEN flag
  -  aggregator_registry: Give devices time to set up when connecting
  -  clean up a variable in surface_dtx_read()
  -  fix semicolon.cocci warnings
  -  aggregator_registry: Add support for Surface Pro 7+
  -  aggregator_registry: Make symbol 'ssam_base_hub_group' static
  -  dtx: Add support for native SSAM devices
  -  Add DTX driver
  -  aggregator: Make SSAM_DEFINE_SYNC_REQUEST_x define static functions
  -  Add platform profile driver
  -  aggregator_registry: Add HID subsystem devices
  -  aggregator_registry: Add DTX device
  -  aggregator_registry: Add platform profile device
  -  aggregator_registry: Add battery subsystem devices
  -  aggregator_registry: Add base device hub
  -  Set up Surface Aggregator device registry
 
 pmc_atom:
  -  Match all Beckhoff Automation baytrail boards with critclk_systems DMI table
 
 thinkpad_acpi:
  -  Add labels to the first 2 temperature sensors
  -  Correct thermal sensor allocation
  -  Correct minor typo
  -  sysfs interface to get wwan antenna type
  -  Disable DYTC CQL mode around switching to balanced mode
  -  Allow the FnLock LED to change state
  -  check dytc version for lapmode sysfs
  -  Handle keyboard cover attach/detach events
 
 tools/power/x86/intel-speed-select:
  -  v1.9 release
  -  Drop __DATE__ and __TIME__ macros
  -  Add options to force online
  -  Process mailbox read error for core-power
  -  Increase string size
 
 touchscreen_dmi:
  -  Add info for the Teclast Tbook 11 tablet
  -  Handle device properties with software node API
 
 wmi:
  -  Make remove callback return void
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmCGbVEUHGhkZWdvZWRl
 QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9x4ywgAo51ExPQcLMlEDdfpN7oa0ErT+4AF
 lKqOHO/g3Am63NwlAVZElKAJq+AChfQzZ+Idy9E/IirFplmhuoKBBRQoB+U9SwYS
 zerwNDwAh1j1ZLlWDo0BSsiJLdGJH3j5BvScjo57+Vfa75J9EofIGXvNEjLNxb7j
 djLc4FawAfaqL6YerKXZPvYIfpIw2+26SyxDw2s6KlYyBkPIEneQvto0ObWR3vLc
 1iFxLgfxL1fYX7dD9e/9H84kIQzs/wgTduXmnSn32BcFw3YOtWpnpwB0wJ8IIXM0
 8Ta6jH2ZGTbgfKaHZf2O+UObj8tRXFzjpx4neh5vybRrBsYELzQIm+W+jQ==
 =fsK6
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver updates freom Hans de Goede:

 - lots of Microsoft Surface work

 - platform-profile support for HP and Microsoft Surface devices

 - new WMI Gigabyte motherboard temperature monitoring driver

 - Intel PMC improvements for Tiger Lake and Alder Lake

 - misc bugfixes, improvements and quirk additions all over

* tag 'platform-drivers-x86-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (87 commits)
  platform/x86: gigabyte-wmi: add support for B550M AORUS PRO-P
  platform/x86: intel_pmc_core: Uninitialized data in pmc_core_lpm_latch_mode_write()
  platform/x86: intel_pmc_core: add ACPI dependency
  platform/surface: aggregator: fix a bit test
  platform/x86: intel_pmc_core: Fix "unsigned 'ret' is never less than zero" smatch warning
  platform/x86: touchscreen_dmi: Add info for the Teclast Tbook 11 tablet
  platform/x86: intel_pmc_core: Add support for Alder Lake PCH-P
  platform/x86: intel_pmc_core: Add LTR registers for Tiger Lake
  platform/x86: intel_pmc_core: Add option to set/clear LPM mode
  platform/x86: intel_pmc_core: Add requirements file to debugfs
  platform/x86: intel_pmc_core: Get LPM requirements for Tiger Lake
  platform/x86: intel_pmc_core: Show LPM residency in microseconds
  platform/x86: intel_pmc_core: Handle sub-states generically
  platform/x86: intel_pmc_core: Remove global struct pmc_dev
  platform/x86: intel_pmc_core: Don't use global pmcdev in quirks
  platform/x86: intel_chtdc_ti_pwrbtn: Fix missing IRQF_ONESHOT as only threaded handler
  platform/x86: gigabyte-wmi: add X570 AORUS ELITE
  platform/x86: thinkpad_acpi: Add labels to the first 2 temperature sensors
  platform/x86: pmc_atom: Match all Beckhoff Automation baytrail boards with critclk_systems DMI table
  platform/x86: add Gigabyte WMI temperature driver
  ...
2021-04-26 10:58:33 -07:00
Linus Torvalds 31a24ae89c arm64 updates for 5.13:
- MTE asynchronous support for KASan. Previously only synchronous
   (slower) mode was supported. Asynchronous is faster but does not allow
   precise identification of the illegal access.
 
 - Run kernel mode SIMD with softirqs disabled. This allows using NEON in
   softirq context for crypto performance improvements. The conditional
   yield support is modified to take softirqs into account and reduce the
   latency.
 
 - Preparatory patches for Apple M1: handle CPUs that only have the VHE
   mode available (host kernel running at EL2), add FIQ support.
 
 - arm64 perf updates: support for HiSilicon PA and SLLC PMU drivers, new
   functions for the HiSilicon HHA and L3C PMU, cleanups.
 
 - Re-introduce support for execute-only user permissions but only when
   the EPAN (Enhanced Privileged Access Never) architecture feature is
   available.
 
 - Disable fine-grained traps at boot and improve the documented boot
   requirements.
 
 - Support CONFIG_KASAN_VMALLOC on arm64 (only with KASAN_GENERIC).
 
 - Add hierarchical eXecute Never permissions for all page tables.
 
 - Add arm64 prctl(PR_PAC_{SET,GET}_ENABLED_KEYS) allowing user programs
   to control which PAC keys are enabled in a particular task.
 
 - arm64 kselftests for BTI and some improvements to the MTE tests.
 
 - Minor improvements to the compat vdso and sigpage.
 
 - Miscellaneous cleanups.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAmB5xkkACgkQa9axLQDI
 XvEBgRAAsr6r8gsBQJP3FDHmbtbVf2ej5QJTCOAQAGHbTt0JH7Pk03pWSBr7h5nF
 vsddRDxxeDgB6xd7jWP7EvDaPxHeB0CdSj5gG8EP/ZdOm8sFAwB1ZIHWikgUgSwW
 nu6R28yXTMSj+EkyFtahMhTMJ1EMF4sCPuIgAo59ST5w/UMMqLCJByOu4ej6RPKZ
 aeSJJWaDLBmbgnTKWxRvCc/MgIx4J/LAHWGkdpGjuMK6SLp38Kdf86XcrklXtzwf
 K30ZYeoKq8zZ+nFOsK9gBVlOlocZcbS1jEbN842jD6imb6vKLQtBWrKk9A6o4v5E
 XulORWcSBhkZb3ItIU9+6SmelUExf0VeVlSp657QXYPgquoIIGvFl6rCwhrdGMGO
 bi6NZKCfJvcFZJoIN1oyhuHejgZSBnzGEcvhvzNdg7ItvOCed7q3uXcGHz/OI6tL
 2TZKddzHSEMVfTo0D+RUsYfasZHI1qAiQ0mWVC31c+YHuRuW/K/jlc3a5TXlSBUa
 Dwu0/zzMLiqx65ISx9i7XNMrngk55uzrS6MnwSByPoz4M4xsElZxt3cbUxQ8YAQz
 jhxTHs1Pwes8i7f4n61ay/nHCFbmVvN/LlsPRpZdwd8JumThLrDolF3tc6aaY0xO
 hOssKtnGY4Xvh/WitfJ5uvDb1vMObJKTXQEoZEJh4hlNQDxdeUE=
 =6NGI
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Catalin Marinas:

 - MTE asynchronous support for KASan. Previously only synchronous
   (slower) mode was supported. Asynchronous is faster but does not
   allow precise identification of the illegal access.

 - Run kernel mode SIMD with softirqs disabled. This allows using NEON
   in softirq context for crypto performance improvements. The
   conditional yield support is modified to take softirqs into account
   and reduce the latency.

 - Preparatory patches for Apple M1: handle CPUs that only have the VHE
   mode available (host kernel running at EL2), add FIQ support.

 - arm64 perf updates: support for HiSilicon PA and SLLC PMU drivers,
   new functions for the HiSilicon HHA and L3C PMU, cleanups.

 - Re-introduce support for execute-only user permissions but only when
   the EPAN (Enhanced Privileged Access Never) architecture feature is
   available.

 - Disable fine-grained traps at boot and improve the documented boot
   requirements.

 - Support CONFIG_KASAN_VMALLOC on arm64 (only with KASAN_GENERIC).

 - Add hierarchical eXecute Never permissions for all page tables.

 - Add arm64 prctl(PR_PAC_{SET,GET}_ENABLED_KEYS) allowing user programs
   to control which PAC keys are enabled in a particular task.

 - arm64 kselftests for BTI and some improvements to the MTE tests.

 - Minor improvements to the compat vdso and sigpage.

 - Miscellaneous cleanups.

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (86 commits)
  arm64/sve: Add compile time checks for SVE hooks in generic functions
  arm64/kernel/probes: Use BUG_ON instead of if condition followed by BUG.
  arm64: pac: Optimize kernel entry/exit key installation code paths
  arm64: Introduce prctl(PR_PAC_{SET,GET}_ENABLED_KEYS)
  arm64: mte: make the per-task SCTLR_EL1 field usable elsewhere
  arm64/sve: Remove redundant system_supports_sve() tests
  arm64: fpsimd: run kernel mode NEON with softirqs disabled
  arm64: assembler: introduce wxN aliases for wN registers
  arm64: assembler: remove conditional NEON yield macros
  kasan, arm64: tests supports for HW_TAGS async mode
  arm64: mte: Report async tag faults before suspend
  arm64: mte: Enable async tag check fault
  arm64: mte: Conditionally compile mte_enable_kernel_*()
  arm64: mte: Enable TCO in functions that can read beyond buffer limits
  kasan: Add report for async mode
  arm64: mte: Drop arch_enable_tagging()
  kasan: Add KASAN mode kernel parameter
  arm64: mte: Add asynchronous mode support
  arm64: Get rid of CONFIG_ARM64_VHE
  arm64: Cope with CPUs stuck in VHE mode
  ...
2021-04-26 10:25:03 -07:00
Linus Torvalds eea2647e74 Entry code update:
Provide support for randomized stack offsets per syscall to make
  stack-based attacks harder which rely on the deterministic stack layout.
 
  The feature is based on the original idea of PaX's RANDSTACK feature, but
  uses a significantly different implementation.
 
  The offset does not affect the pt_regs location on the task stack as this
  was agreed on to be of dubious value. The offset is applied before the
  actual syscall is invoked.
 
  The offset is stored per cpu and the randomization happens at the end of
  the syscall which is less predictable than on syscall entry.
 
  The mechanism to apply the offset is via alloca(), i.e. abusing the
  dispised VLAs. This comes with the drawback that stack-clash-protection
  has to be disabled for the affected compilation units and there is also
  a negative interaction with stack-protector.
 
  Those downsides are traded with the advantage that this approach does not
  require any intrusive changes to the low level assembly entry code, does
  not affect the unwinder and the correct stack alignment is handled
  automatically by the compiler.
 
  The feature is guarded with a static branch which avoids the overhead when
  disabled.
 
  Currently this is supported for X86 and ARM64.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmCGjz8THHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoWsvD/4tGnPAurd6lbzxWzRjW7jOOVyzkODM
 UXtIxxICaj7o6MNcloaGe1QtJ8+QOCw3yPQfLG/SoWHse5+oUKQRL9dmWVeJyRSt
 JZ1pirkKqWrB+OmPbJKUiO3/TsZ2Z/vO41JVgVTL5/HWhOECSDzZsJkuvF/H+qYD
 ReDzd7FUNd76pwVOsXq/cxXclRa81/wMNZRVwmyAwFYE2XoPtQyTERTLrfj6aQKF
 P0txr9fEjYlPPwYOk1kjBAoJfDltNm48BBL7CGZtRlsqpNpdsJ1MkeGffhodb6F0
 pJYQMlQJHXABZb5GF+v93+iASDpRFn0EvPmLkCxQUfZYLOkRsnuEF2S/fsYX/WPo
 uin/wQKwLVdeQq9d9BwlZUKEgsQuV7Q0GVN+JnEQerwD6cWTxv4a1RIUH+K/4Wo5
 nTeJVRKcs6m7UkGQRm8JbqnUP0vCV+PSiWWB8J9CmjYeCPbkGjt6mBIsmPaDZ9VL
 4i+UX5DJayoREF/rspOBcJftUmExize49p9860UI9N6fd7DsDt7Dq9Ai+ADtZa4C
 9BPbF4NWzJq8IWLqBi+PpKBAT3JMX9qQi7s9sbrRxpxtew9Keu5qggKZJYumX71V
 qgUMk+xB86HZOrtF6F3oY0zxYv3haPvDydsDgqojtqNGk4PdAdgDYJQwMlb8QSly
 SwIWPHIfvP4R9w==
 =GMlJ
 -----END PGP SIGNATURE-----

Merge tag 'x86-entry-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull entry code update from Thomas Gleixner:
 "Provide support for randomized stack offsets per syscall to make
  stack-based attacks harder which rely on the deterministic stack
  layout.

  The feature is based on the original idea of PaX's RANDSTACK feature,
  but uses a significantly different implementation.

  The offset does not affect the pt_regs location on the task stack as
  this was agreed on to be of dubious value. The offset is applied
  before the actual syscall is invoked.

  The offset is stored per cpu and the randomization happens at the end
  of the syscall which is less predictable than on syscall entry.

  The mechanism to apply the offset is via alloca(), i.e. abusing the
  dispised VLAs. This comes with the drawback that
  stack-clash-protection has to be disabled for the affected compilation
  units and there is also a negative interaction with stack-protector.

  Those downsides are traded with the advantage that this approach does
  not require any intrusive changes to the low level assembly entry
  code, does not affect the unwinder and the correct stack alignment is
  handled automatically by the compiler.

  The feature is guarded with a static branch which avoids the overhead
  when disabled.

  Currently this is supported for X86 and ARM64"

* tag 'x86-entry-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  arm64: entry: Enable random_kstack_offset support
  lkdtm: Add REPORT_STACK for checking stack offsets
  x86/entry: Enable random_kstack_offset support
  stack: Optionally randomize kernel stack offset each syscall
  init_on_alloc: Optimize static branches
  jump_label: Provide CONFIG-driven build state defaults
2021-04-26 10:02:09 -07:00
Linus Torvalds 87dcebff92 The time and timers updates contain:
Core changes:
 
    - Allow runtime power management when the clocksource is changed.
 
    - A correctness fix for clock_adjtime32() so that the return value
      on success is not overwritten by the result of the copy to user.
 
    - Allow late installment of broadcast clockevent devices which was
      broken because nothing switched them over to oneshot mode. This went
      unnoticed so far because clockevent devices used to be built in, but
      now people started to make them modular.
 
    - Debugfs related simplifications
 
    - Small cleanups and improvements here and there
 
 Driver changes:
 
    - The usual set of device tree binding updates for a wide range
      of drivers/devices.
 
    - The usual updates and improvements for drivers all over the place but
      nothing outstanding.
 
    - No new clocksource/event drivers. They'll come back next time.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmCGieYTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYobRJEACNCtecUXdyt/u+ViDgHwG1XOHSZUkG
 zBO6E/uZ3G6ZUkr6FogAaY2eMMrSdSUyqbiNBSYBJki2ptMJWF5Li5VzqINmrBuD
 VyjK3FEDV0bXW9EJOm4d+95pMyFQ/pYv9VPcByj7VW21t+IDE/4pLeZ8M8shNDHa
 pmMnR/tgX4ZZtSrX2NqCUNoTrkycaz8d5NOuso5HjKvPkJ5BU2kSxULTGmvaeTil
 8d+70AetApDgzAWpCnJFPlLlOHIPyhnMxS5edvsMIbMIkRLsnI+b3LsPZe+CqVZ0
 zaP6KYvG+iqU8nKdz7OweV1fLgBD52GKgHlpTkhhYs3GW4XBEXDrsyoEyeIiZ22u
 YUkTzFvZ4JG/+80UUaKpLDIGYWUj1h+xe/EtWS0s8lj108RsNLghd/0YjFMikspT
 fYC2WpaXJDz3URbSV57OXGbwhg2zOYI5Supg6wNrmFfcld3k6CSitG4idDpIGjJE
 8WIcZmeZSelDufskiY8RmsiTumqNOf5P33F71r9JRI6QU9RsyYb3fJN71AFKnLq2
 31YEAShpzPYG5EGRinPymJRi3icdmcEQECz/pWUb6ua0s/HG1+HD9emLwHzvPdul
 hcWRq19GaK1YBzOfV60+8cdxW8ZEOROvRVdYJO8FoYcnueUJmOSM+boqSkRtDw3o
 RywO8BetxukPJg==
 =F6Du
 -----END PGP SIGNATURE-----

Merge tag 'timers-core-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer updates from Thomas Gleixner:
 "The time and timers updates contain:

  Core changes:

   - Allow runtime power management when the clocksource is changed.

   - A correctness fix for clock_adjtime32() so that the return value on
     success is not overwritten by the result of the copy to user.

   - Allow late installment of broadcast clockevent devices which was
     broken because nothing switched them over to oneshot mode. This
     went unnoticed so far because clockevent devices used to be built
     in, but now people started to make them modular.

   - Debugfs related simplifications

   - Small cleanups and improvements here and there

  Driver changes:

   - The usual set of device tree binding updates for a wide range of
     drivers/devices.

   - The usual updates and improvements for drivers all over the place
     but nothing outstanding.

   - No new clocksource/event drivers. They'll come back next time"

* tag 'timers-core-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  posix-timers: Preserve return value in clock_adjtime32()
  tick/broadcast: Allow late registered device to enter oneshot mode
  tick: Use tick_check_replacement() instead of open coding it
  time/timecounter: Mark 1st argument of timecounter_cyc2time() as const
  dt-bindings: timer: nuvoton,npcm7xx: Add wpcm450-timer
  clocksource/drivers/arm_arch_timer: Add __ro_after_init and __init
  clocksource/drivers/timer-ti-dm: Handle dra7 timer wrap errata i940
  clocksource/drivers/timer-ti-dm: Prepare to handle dra7 timer wrap issue
  clocksource/drivers/dw_apb_timer_of: Add handling for potential memory leak
  clocksource/drivers/npcm: Add support for WPCM450
  clocksource/drivers/sh_cmt: Don't use CMTOUT_IE with R-Car Gen2/3
  clocksource/drivers/pistachio: Fix trivial typo
  clocksource/drivers/ingenic_ost: Fix return value check in ingenic_ost_probe()
  clocksource/drivers/timer-ti-dm: Add missing set_state_oneshot_stopped
  clocksource/drivers/timer-ti-dm: Fix posted mode status check order
  dt-bindings: timer: renesas,cmt: Document R8A77961
  dt-bindings: timer: renesas,cmt: Add r8a779a0 CMT support
  clocksource/drivers/ingenic-ost: Add support for the JZ4760B
  clocksource/drivers/ingenic: Add support for the JZ4760
  dt-bindings: timer: ingenic: Add compatible strings for JZ4760(B)
  ...
2021-04-26 09:54:03 -07:00
Linus Torvalds ea5bc7b977 Trivial cleanups and fixes all over the place.
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmCGmYIACgkQEsHwGGHe
 VUr45w/8CSXr7MXaFBj4To0hTWJXSZyF6YGqlZOSJXFcFh4cWTNwfVOoFaV47aDo
 +HsCNTkGENcKhLrDUWDRiG/Uo46jxtOtl1vhq7U4pGemSYH871XWOKfb5k5XNMwn
 /uhaHMI4aEfd6bUFnF518NeyRIsD0BdqFj4tB7RbAiyFwdETDX9Tkj/uBKnQ4zon
 4tEDoXgThuK5YKK9zVQg5pa7aFp2zg1CAdX/WzBkS8BHVBPXSV0CF97AJYQOM/V+
 lUHv+BN3wp97GYHPQMPsbkNr8IuFoe2mIvikwjxg8iOFpzEU1G1u09XV9R+PXByX
 LclFTRqK/2uU5hJlcsBiKfUuidyErYMRYImbMAOREt2w0ogWVu2zQ7HkjVve25h1
 sQPwPudbAt6STbqRxvpmB3yoV4TCYwnF91FcWgEy+rcEK2BDsHCnScA45TsK5I1C
 kGR1K17pHXprgMZFPveH+LgxewB6smDv+HllxQdSG67LhMJXcs2Epz0TsN8VsXw8
 dlD3lGReK+5qy9FTgO7mY0xhiXGz1IbEdAPU4eRBgih13puu03+jqgMaMabvBWKD
 wax+BWJUrPtetwD5fBPhlS/XdJDnd8Mkv2xsf//+wT0s4p+g++l1APYxeB8QEehm
 Pd7Mvxm4GvQkfE13QEVIPYQRIXCMH/e9qixtY5SHUZDBVkUyFM0=
 =bO1i
 -----END PGP SIGNATURE-----

Merge tag 'x86_cleanups_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull misc x86 cleanups from Borislav Petkov:
 "Trivial cleanups and fixes all over the place"

* tag 'x86_cleanups_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  MAINTAINERS: Remove me from IDE/ATAPI section
  x86/pat: Do not compile stubbed functions when X86_PAT is off
  x86/asm: Ensure asm/proto.h can be included stand-alone
  x86/platform/intel/quark: Fix incorrect kernel-doc comment syntax in files
  x86/msr: Make locally used functions static
  x86/cacheinfo: Remove unneeded dead-store initialization
  x86/process/64: Move cpu_current_top_of_stack out of TSS
  tools/turbostat: Unmark non-kernel-doc comment
  x86/syscalls: Fix -Wmissing-prototypes warnings from COND_SYSCALL()
  x86/fpu/math-emu: Fix function cast warning
  x86/msr: Fix wr/rdmsr_safe_regs_on_cpu() prototypes
  x86: Fix various typos in comments, take #2
  x86: Remove unusual Unicode characters from comments
  x86/kaslr: Return boolean values from a function returning bool
  x86: Fix various typos in comments
  x86/setup: Remove unused RESERVE_BRK_ARRAY()
  stacktrace: Move documentation for arch_stack_walk_reliable() to header
  x86: Remove duplicate TSC DEADLINE MSR definitions
2021-04-26 09:25:47 -07:00
Vitaly Kuznetsov 3bf0fcd754 KVM: selftests: Speed up set_memory_region_test
After commit 4fc096a99e ("KVM: Raise the maximum number of user memslots")
set_memory_region_test may take too long, reports are that the default
timeout value we have (120s) may not be enough even on a physical host.

Speed things up a bit by throwing away vm_userspace_mem_region_add() usage
from test_add_max_memory_regions(), we don't really need to do the majority
of the stuff it does for the sake of this test.

On my AMD EPYC 7401P, # time ./set_memory_region_test
pre-patch:
 Testing KVM_RUN with zero added memory regions
 Allowed number of memory slots: 32764
 Adding slots 0..32763, each memory region with 2048K size
 Testing MOVE of in-use region, 10 loops
 Testing DELETE of in-use region, 10 loops

 real	0m44.917s
 user	0m7.416s
 sys	0m34.601s

post-patch:
 Testing KVM_RUN with zero added memory regions
 Allowed number of memory slots: 32764
 Adding slots 0..32763, each memory region with 2048K size
 Testing MOVE of in-use region, 10 loops
 Testing DELETE of in-use region, 10 loops

 real	0m20.714s
 user	0m0.109s
 sys	0m18.359s

Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210426130121.758229-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-04-26 12:21:27 -04:00
Linus Torvalds 81a489790a Add the guest side of SGX support in KVM guests. Work by Sean
Christopherson, Kai Huang and Jarkko Sakkinen. Along with the usual
 fixes, cleanups and improvements.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmCGlgYACgkQEsHwGGHe
 VUqbYA/+IgX7uBkATndzTBL6l/D3QQaMRUkOk5nO9sOzQaYJ/Qwarfakax61CZrl
 dZFdF07T/kSpMXQ6HIjzEaRx6j12xMYksrm8xBBSfXjtkIYu4auVloX2ldKhHwaK
 OyiKS+R0O/Q7XvozEiPsQCf7XwraZFO+iMJ0jMxbPO7ZvxDXDBv0Fx3d9yzPx9Qg
 BbJuIEKMoFPR3P39CWw0cOXr12Z9mmFReBKoSV4dZbZMRmv7FrA/Qlc+uS+RNZFK
 /5sCn7x27qVx8Ha/Lh42kQf+yqv1l3437aqmG2vAbHQPmnbDmBeApZ6jhaoX3jhD
 9ylkcpWFFf26oSbYAdmztZENLXRWLH6OIPxtmbf2HMsROiNR/cV0s4d2aduN/dHz
 s1VnaDFayoub9CPWtiv0RJJnwmB6d+wF2JbQGh+kPZMX3VaxVPwTVLWQdsAVaB8Y
 y7A2vZeWWHvP1a7ATbTFRDlTKKV3qDpMTD1B+hFELLNjMvyDU5c/1GhrIh0o1Jo3
 jGrauylSInMxDkpDTDhQqU+/CSnV03zdzq1DSzxgig2Q0Es6pKxQHbL0honTf0GJ
 l+8nefsQqRguZ1rVeuuSYvGPF++eqfyOiTZgN4fWdtZWJKMabsPNUbc4U3sP0/Sn
 oe3Ixo2F41E9++MODF1G80DKLD/mVLYxdzC91suOmgfB2gbRhSg=
 =KFYo
 -----END PGP SIGNATURE-----

Merge tag 'x86_sgx_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 SGX updates from Borislav Petkov:
 "Add the guest side of SGX support in KVM guests. Work by Sean
  Christopherson, Kai Huang and Jarkko Sakkinen.

  Along with the usual fixes, cleanups and improvements"

* tag 'x86_sgx_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
  x86/sgx: Mark sgx_vepc_vm_ops static
  x86/sgx: Do not update sgx_nr_free_pages in sgx_setup_epc_section()
  x86/sgx: Move provisioning device creation out of SGX driver
  x86/sgx: Add helpers to expose ECREATE and EINIT to KVM
  x86/sgx: Add helper to update SGX_LEPUBKEYHASHn MSRs
  x86/sgx: Add encls_faulted() helper
  x86/sgx: Add SGX2 ENCLS leaf definitions (EAUG, EMODPR and EMODT)
  x86/sgx: Move ENCLS leaf definitions to sgx.h
  x86/sgx: Expose SGX architectural definitions to the kernel
  x86/sgx: Initialize virtual EPC driver even when SGX driver is disabled
  x86/cpu/intel: Allow SGX virtualization without Launch Control support
  x86/sgx: Introduce virtual EPC for use by KVM guests
  x86/sgx: Add SGX_CHILD_PRESENT hardware error code
  x86/sgx: Wipe out EREMOVE from sgx_free_epc_page()
  x86/cpufeatures: Add SGX1 and SGX2 sub-features
  x86/cpufeatures: Make SGX_LC feature bit depend on SGX bit
  x86/sgx: Remove unnecessary kmap() from sgx_ioc_enclave_init()
  selftests/sgx: Use getauxval() to simplify test code
  selftests/sgx: Improve error detection and messages
  x86/sgx: Add a basic NUMA allocation scheme to sgx_alloc_epc_page()
  ...
2021-04-26 09:15:56 -07:00
Linus Torvalds 98ee795b21 A new kcpuid tool to dump the raw CPUID leafs of a CPU. It has the CPUID
bit definitions in a separate csv file which allows for adding support
 for new CPUID leafs and bits without having to update the tool. The main
 use case for the tool is hw enablement on preproduction x86 hw.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmCGjgsACgkQEsHwGGHe
 VUo7Ng//YbZgJk2RfRKLKnYbp0eZdzodyynxGZ101p81atsW7gsNeepKIwbWJ7Jb
 +gv34bolO8QB3wBmY5YTZgedEguiqcrNQ4DaT/DLlE0C96kY6k/+wYFAokYVlsSH
 ZffPymnEE9ZhWwg7sgN+oBEyxj/Fz3hY4nnjX2+qcIYg77pkt85fobQ5+pqfbbDB
 uemKQsaCHI5AH8R3u8PGVDR2wNvtYjofAjywFWl6qNpp+MEoeOGFVj4W6c6N+XNc
 Mq7Bli5Hb9jd0VrI0UhOr3em/2V3YWrlFBn+rnhmzYlpLHC9+5dvaiCugC8K5G0A
 U/iXPNyFjib6G1D38MDR0HfJtfgUK/xwqMZ61pQye9EspqCnMrMhnIMiS5mqNjFw
 JvpKHioQncIWO2MJEDVCfIvDmLjQ3Ms7VWeW8VgxPD7Vg/Gj9ZAzuMawEKi/w57C
 bRnWnQAlyopycIDdN/8R0saVVlWK3a1vZ5RlWM3GnuE83RUJ7Du0S28KRWP1pMy5
 ac6qJUn0eVYsJzul6MGliTxU4THJpBut6vSMQnf2I3j4jSKq2Fx73MaypEEKuHck
 bB8EC6HgUWSfI2HIcUDAwJSaMhp/SkEKlg9OiatyTsWWJYUwilLOdBeN3By3skb9
 y7hZdIwuyICiYg7T4Et0doa7IkBYJEJ+G3/wSw+IlstoMzado6g=
 =G/Um
 -----END PGP SIGNATURE-----

Merge tag 'x86_misc_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 tool update from Borislav Petkov:
 "A new kcpuid tool to dump the raw CPUID leafs of a CPU.

  It has the CPUID bit definitions in a separate csv file which allows
  for adding support for new CPUID leafs and bits without having to
  update the tool.

  The main use case for the tool is hw enablement on preproduction x86
  hardware"

* tag 'x86_misc_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tools/x86/kcpuid: Add AMD leaf 0x8000001E
  tools/x86/kcpuid: Check last token too
  selftests/x86: Add a missing .note.GNU-stack section to thunks_32.S
  tools/x86/kcpuid: Add AMD Secure Encryption leaf
  tools/x86: Add a kcpuid tool to show raw CPU features
2021-04-26 09:09:18 -07:00
Linus Torvalds 2c5ce2dba2 First big cleanup to the paravirt infra to use alternatives and thus
eliminate custom code patching. For that, the alternatives infra is
 extended to accomodate paravirt's needs and, as a result, a lot of
 paravirt patching code goes away, leading to a sizeable cleanup and
 simplification. Work by Juergen Gross.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmCGiXQACgkQEsHwGGHe
 VUocbw/+OkFzphK6zlNA8O3RJ24u2csXUWWUtpGlZ2220Nn/Bgyso2+fyg/NEeQg
 EmEttaY3JG/riCDfHk5Xm2saeVtsbPXN4f0sJm/Io/djF7Cm03WS0eS0aA2Rnuca
 MhmvvkrzYqZXAYVaxKkIH6sNlPgyXX7vDNPbTd/0ZCOb3ZKIyXwL+SaLatMCtE5o
 ou7e8Bj8xPSwcaCyK6sqjrT6jdpPjoTrxxrwENW8AlRu5lCU1pIY03GGhARPVoEm
 fWkZsIPn7DxhpyIqzJtEMX8EK1xN96E+NGkNuSAtJGP9HRb+3j5f4s3IUAfXiLXq
 r7NecFw8zHhPKl9J0pPCiW7JvMrCMU5xGwyeUmmhKyK2BxwvvAC173ohgMlCfB2Q
 FPIsQWemat17tSue8LIA8SmlSDQz6R+tTdUFT+vqmNV34PxOIEeSdV7HG8rs87Ec
 dYB9ENUgXqI+h2t7atE68CpTLpWXzNDcq2olEsaEUXenky2hvsi+VxNkWpmlKQ3I
 NOMU/AyH8oUzn5O0o3oxdPhDLmK5ItEFxjYjwrgLfKFQ+Y8vIMMq3LrKQGwOj+ZU
 n9qC7JjOwDKZGjd3YqNNRhnXp+w0IJvUHbyr3vIAcp8ohQwEKgpUvpZzf/BKUvHh
 nJgJSJ53GFJBbVOJMfgVq+JcFr+WO8MDKHaw6zWeCkivFZdSs4g=
 =h+km
 -----END PGP SIGNATURE-----

Merge tag 'x86_alternatives_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 alternatives/paravirt updates from Borislav Petkov:
 "First big cleanup to the paravirt infra to use alternatives and thus
  eliminate custom code patching.

  For that, the alternatives infrastructure is extended to accomodate
  paravirt's needs and, as a result, a lot of paravirt patching code
  goes away, leading to a sizeable cleanup and simplification.

  Work by Juergen Gross"

* tag 'x86_alternatives_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/paravirt: Have only one paravirt patch function
  x86/paravirt: Switch functions with custom code to ALTERNATIVE
  x86/paravirt: Add new PVOP_ALT* macros to support pvops in ALTERNATIVEs
  x86/paravirt: Switch iret pvops to ALTERNATIVE
  x86/paravirt: Simplify paravirt macros
  x86/paravirt: Remove no longer needed 32-bit pvops cruft
  x86/paravirt: Add new features for paravirt patching
  x86/alternative: Use ALTERNATIVE_TERNARY() in _static_cpu_has()
  x86/alternative: Support ALTERNATIVE_TERNARY
  x86/alternative: Support not-feature
  x86/paravirt: Switch time pvops functions to use static_call()
  static_call: Add function to query current function
  static_call: Move struct static_call_key definition to static_call_types.h
  x86/alternative: Merge include files
  x86/alternative: Drop unused feature parameter from ALTINSTR_REPLACEMENT()
2021-04-26 09:01:29 -07:00
Rafael J. Wysocki e1f9277c4a Merge branch 'acpica'
* acpica: (22 commits)
  ACPICA: Update version to 20210331
  ACPICA: IORT: Updates for revision E.b
  ACPICA: acpisrc: Add missing conversion for VIOT support
  ACPICA: iASL: Decode subtable type field for VIOT
  ACPICA: iASL: Add support for CEDT table
  ACPICA: ACPI 6.4: add support for PHAT table
  ACPICA: ACPI 6.4: add CSI2Bus resource template
  ACPICA: ACPI 6.4: PMTT: add new fields/structures
  ACPICA: CXL 2.0: CEDT: Add new CEDT table
  ACPICA: iASL: Add definitions for the VIOT table
  ACPICA: ACPI 6.4: add SDEV secure access components
  ACPICA: ACPI 6.4: Add new flags in SRAT
  ACPICA: ACPI 6.4: HMAT: add new fields/flags
  ACPICA: ACPI 6.4: NFIT: add Location Cookie field
  ACPICA: Tree-wide: fix various typos and spelling mistakes
  ACPICA: ACPI 6.4: PPTT: add new version of subtable type 1
  ACPICA: ACPI 6.4: PCCT: add support for subtable type 5
  ACPICA: ACPI 6.4: MADT: add Multiprocessor Wakeup Structure
  ACPICA: ACPI 6.4: add CXL ACPI device ID and _CBR object
  ACPICA: ACPI 6.4: add USB4 capabilities UUID
  ...
2021-04-26 17:00:42 +02:00
Rafael J. Wysocki 59e2c959f2 Merge branches 'pm-docs' and 'pm-tools'
* pm-docs:
  PM: clk: remove kernel-doc warning
  PM: wakeup: fix kernel-doc warnings and fix typos
  PM: runtime: remove kernel-doc warnings

* pm-tools:
  pm-graph: Fix typo "accesible"
2021-04-26 17:00:14 +02:00
Arnaldo Carvalho de Melo 26bda3ca19 Merge remote-tracking branch 'torvalds/master' into perf/core
To pick up fixes.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-26 09:35:41 -03:00
Zhenzhong Duan d4787579d2 selftests: kvm: Fix the check of return value
In vm_vcpu_rm() and kvm_vm_release(), a stale return value is checked in
TEST_ASSERT macro.

Fix it by assigning variable ret with correct return value.

Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20210426193138.118276-1-zhenzhong.duan@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-04-26 05:28:25 -04:00
Jiri Olsa 7bb2cc19ae selftests/bpf: Use ASSERT macros in lsm test
Replacing CHECK with ASSERT macros.

Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210414195147.1624932-8-jolsa@kernel.org
2021-04-25 21:09:02 -07:00
Jiri Olsa a1c05c3b09 selftests/bpf: Test that module can't be unloaded with attached trampoline
Adding test to verify that once we attach module's trampoline,
the module can't be unloaded.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210414195147.1624932-7-jolsa@kernel.org
2021-04-25 21:09:02 -07:00
Jiri Olsa cede72ad36 selftests/bpf: Add re-attach test to lsm test
Adding the test to re-attach (detach/attach again) lsm programs,
plus check that already linked program can't be attached again.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210414195147.1624932-6-jolsa@kernel.org
2021-04-25 21:09:02 -07:00
Jiri Olsa 8caadc43f2 selftests/bpf: Add re-attach test to fexit_test
Adding the test to re-attach (detach/attach again) tracing
fexit programs, plus check that already linked program can't
be attached again.

Also switching to ASSERT* macros.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210414195147.1624932-5-jolsa@kernel.org
2021-04-25 21:09:02 -07:00
Jiri Olsa 56dda5a48f selftests/bpf: Add re-attach test to fentry_test
Adding the test to re-attach (detach/attach again) tracing
fentry programs, plus check that already linked program can't
be attached again.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210414195147.1624932-4-jolsa@kernel.org
2021-04-25 21:09:02 -07:00
David S. Miller 5f6c2f536d Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:

====================
pull-request: bpf-next 2021-04-23

The following pull-request contains BPF updates for your *net-next* tree.

We've added 69 non-merge commits during the last 22 day(s) which contain
a total of 69 files changed, 3141 insertions(+), 866 deletions(-).

The main changes are:

1) Add BPF static linker support for extern resolution of global, from Andrii.

2) Refine retval for bpf_get_task_stack helper, from Dave.

3) Add a bpf_snprintf helper, from Florent.

4) A bunch of miscellaneous improvements from many developers.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-25 18:02:32 -07:00
Linus Torvalds d2d09fbe33 perf tools fixes for v5.12: 4th batch
- Fix potential NULL pointer dereference in the auxtrace option parser.
 
 - Fix access to PID in an array when setting a PID filter in 'perf ftrace'.
 
 - Fix error return code in the 'perf data' tool and in maps__clone(),
   found using a static analysis tool from Huawei.
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYIV2gQAKCRCyPKLppCJ+
 JxlaAP9OUoT+/2lsgnMcU5b+m18TNR4RSTZwfmPszpeyOlfaEgD/YDB8OErUA5VT
 VxtLeyOisker3EwZFHzYhN7hxqh9sgU=
 =wvGY
 -----END PGP SIGNATURE-----

Merge tag 'perf-tools-fixes-for-v5.12-2021-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix potential NULL pointer dereference in the auxtrace option parser

 - Fix access to PID in an array when setting a PID filter in 'perf ftrace'

 - Fix error return code in the 'perf data' tool and in maps__clone(),
   found using a static analysis tool from Huawei

* tag 'perf-tools-fixes-for-v5.12-2021-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf map: Fix error return code in maps__clone()
  perf ftrace: Fix access to pid in array when setting a pid filter
  perf auxtrace: Fix potential NULL pointer dereference
  perf data: Fix error return code in perf_data__create_dir()
2021-04-25 09:48:46 -07:00
Jin Yao 464c62f6f6 perf vendor events intel: Add missing skylake & icelake model numbers
Kernel has supported COMETLAKE/COMETLAKE_L to use the SKYLAKE
events and supported TIGERLAKE_L/TIGERLAKE/ROCKETLAKE to use
the ICELAKE events. But pmu-events mapfile.csv is missing
these model numbers.

Now add the missing model numbers to mapfile.csv.

Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210329070903.8894-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-25 11:35:01 -03:00
Masahiro Yamada b61442df74 tools: do not include scripts/Kbuild.include
Since commit 57fd251c78 ("kbuild: split cc-option and friends to
scripts/Makefile.compiler"), some kselftests fail to build.

The tools/ directory opted out Kbuild, and went in a different
direction. People copied scripts and Makefiles to the tools/ directory
to create their own build system.

tools/build/Build.include mimics scripts/Kbuild.include, but some
tool Makefiles include the Kbuild one to import a feature that is
missing in tools/build/Build.include:

 - Commit ec04aa3ae8 ("tools/thermal: tmon: use "-fstack-protector"
   only if supported") included scripts/Kbuild.include from
   tools/thermal/tmon/Makefile to import the cc-option macro.

 - Commit c2390f16fc ("selftests: kvm: fix for compilers that do
   not support -no-pie") included scripts/Kbuild.include from
   tools/testing/selftests/kvm/Makefile to import the try-run macro.

 - Commit 9cae4ace80 ("selftests/bpf: do not ignore clang
   failures") included scripts/Kbuild.include from
   tools/testing/selftests/bpf/Makefile to import the .DELETE_ON_ERROR
   target.

 - Commit 0695f8bca9 ("selftests/powerpc: Handle Makefile for
   unrecognized option") included scripts/Kbuild.include from
   tools/testing/selftests/powerpc/pmu/ebb/Makefile to import the
   try-run macro.

Copy what they need into tools/build/Build.include, and make them
include it instead of scripts/Kbuild.include.

Link: https://lore.kernel.org/lkml/86dadf33-70f7-a5ac-cb8c-64966d2f45a1@linux.ibm.com/
Fixes: 57fd251c78 ("kbuild: split cc-option and friends to scripts/Makefile.compiler")
Reported-by: Janosch Frank <frankja@linux.ibm.com>
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Yonghong Song <yhs@fb.com>
2021-04-25 05:26:13 +09:00
Vasily Averin 1974c45dd7 tools/cgroup/slabinfo.py: updated to work on current kernel
slabinfo.py script does not work with actual kernel version.

First, it was unable to recognise SLUB susbsytem, and when I specified
it manually it failed again with

  AttributeError: 'struct page' has no member 'obj_cgroups'

.. and then again with

  File "tools/cgroup/memcg_slabinfo.py", line 221, in main
    memcg.kmem_caches.address_of_(),
  AttributeError: 'struct mem_cgroup' has no member 'kmem_caches'

Link: https://lkml.kernel.org/r/cec1a75e-43b4-3d64-2084-d9f98fda037f@virtuozzo.com
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Tested-by: Roman Gushchin <guro@fb.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-23 14:42:40 -07:00
Po-Hsu Lin b881d089c7 selftests/net: bump timeout to 5 minutes
We found that with the latest mainline kernel (5.12.0-051200rc8) on
some KVM instances / bare-metal systems, the following tests will take
longer than the kselftest framework default timeout (45 seconds) to
run and thus got terminated with TIMEOUT error:
* xfrm_policy.sh - took about 2m20s
* pmtu.sh - took about 3m5s
* udpgso_bench.sh - took about 60s

Bump the timeout setting to 5 minutes to allow them have a chance to
finish.

https://bugs.launchpad.net/bugs/1856010
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23 14:08:58 -07:00
Yonglong Li df8aee6d6f selftests: mptcp: add a test case for MSG_PEEK
Extend mptcp_connect tool with MSG_PEEK support and add a test case in
mptcp_connect.sh that checks the data received from/after recv() with
MSG_PEEK.

Acked-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23 14:06:32 -07:00
Andrii Nakryiko a9dab4e456 selftests/bpf: Document latest Clang fix expectations for linking tests
Document which fixes are required to generate correct static linking
selftests.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-19-andrii@kernel.org
2021-04-23 14:05:28 -07:00
Andrii Nakryiko 3b2ad50225 selftests/bpf: Add map linking selftest
Add selftest validating various aspects of statically linking BTF-defined map
definitions. Legacy map definitions do not support extern resolution between
object files. Some of the aspects validated:
  - correct resolution of extern maps against concrete map definitions;
  - extern maps can currently only specify map type and key/value size and/or
    type information;
  - weak concrete map definitions are resolved properly.

Static map definitions are not yet supported by libbpf, so they are not
explicitly tested, though manual testing showes that BPF linker handles them
properly.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-18-andrii@kernel.org
2021-04-23 14:05:27 -07:00
Andrii Nakryiko 14f1aae17e selftests/bpf: Add global variables linking selftest
Add selftest validating various aspects of statically linking global
variables:
  - correct resolution of extern variables across .bss, .data, and .rodata
    sections;
  - correct handling of weak definitions;
  - correct de-duplication of repeating special externs (.kconfig, .ksyms).

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-17-andrii@kernel.org
2021-04-23 14:05:27 -07:00
Andrii Nakryiko f2644fb44d selftests/bpf: Add function linking selftest
Add selftest validating various aspects of statically linking functions:
  - no conflicts and correct resolution for name-conflicting static funcs;
  - correct resolution of extern functions;
  - correct handling of weak functions, both resolution itself and libbpf's
    handling of unused weak function that "lost" (it leaves gaps in code with
    no ELF symbols);
  - correct handling of hidden visibility to turn global function into
    "static" for the purpose of BPF verification.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-16-andrii@kernel.org
2021-04-23 14:05:27 -07:00
Andrii Nakryiko b131aed910 selftests/bpf: Omit skeleton generation for multi-linked BPF object files
Skip generating individual BPF skeletons for files that are supposed to be
linked together to form the final BPF object file. Very often such files are
"incomplete" BPF object files, which will fail libbpf bpf_object__open() step,
if used individually, thus failing BPF skeleton generation. This is by design,
so skip individual BPF skeletons and only validate them as part of their
linked final BPF object file and skeleton.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-15-andrii@kernel.org
2021-04-23 14:05:27 -07:00
Andrii Nakryiko 41c472e85b selftests/bpf: Use -O0 instead of -Og in selftests builds
While -Og is designed to work well with debugger, it's still inferior to -O0
in terms of debuggability experience. It will cause some variables to still be
inlined, it will also prevent single-stepping some statements and otherwise
interfere with debugging experience. So switch to -O0 which turns off any
optimization and provides the best debugging experience.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-14-andrii@kernel.org
2021-04-23 14:05:27 -07:00
Andrii Nakryiko 0a342457b3 libbpf: Support extern resolution for BTF-defined maps in .maps section
Add extra logic to handle map externs (only BTF-defined maps are supported for
linking). Re-use the map parsing logic used during bpf_object__open(). Map
externs are currently restricted to always match complete map definition. So
all the specified attributes will be compared (down to pining, map_flags,
numa_node, etc). In the future this restriction might be relaxed with no
backwards compatibility issues. If any attribute is mismatched between extern
and actual map definition, linker will report an error, pointing out which one
mismatches.

The original intent was to allow for extern to specify attributes that matters
(to user) to enforce. E.g., if you specify just key information and omit
value, then any value fits. Similarly, it should have been possible to enforce
map_flags, pinning, and any other possible map attribute. Unfortunately, that
means that multiple externs can be only partially overlapping with each other,
which means linker would need to combine their type definitions to end up with
the most restrictive and fullest map definition. This requires an extra amount
of BTF manipulation which at this time was deemed unnecessary and would
require further extending generic BTF writer APIs. So that is left for future
follow ups, if there will be demand for that. But the idea seems intresting
and useful, so I want to document it here.

Weak definitions are also supported, but are pretty strict as well, just
like externs: all weak map definitions have to match exactly. In the follow up
patches this most probably will be relaxed, with __weak map definitions being
able to differ between each other (with non-weak definition always winning, of
course).

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-13-andrii@kernel.org
2021-04-23 14:05:27 -07:00
Andrii Nakryiko a46349227c libbpf: Add linker extern resolution support for functions and global variables
Add BPF static linker logic to resolve extern variables and functions across
multiple linked together BPF object files.

For that, linker maintains a separate list of struct glob_sym structures,
which keeps track of few pieces of metadata (is it extern or resolved global,
is it a weak symbol, which ELF section it belongs to, etc) and ties together
BTF type info and ELF symbol information and keeps them in sync.

With adding support for extern variables/funcs, it's now possible for some
sections to contain both extern and non-extern definitions. This means that
some sections may start out as ephemeral (if only externs are present and thus
there is not corresponding ELF section), but will be "upgraded" to actual ELF
section as symbols are resolved or new non-extern definitions are appended.

Additional care is taken to not duplicate extern entries in sections like
.kconfig and .ksyms.

Given libbpf requires BTF type to always be present for .kconfig/.ksym
externs, linker extends this requirement to all the externs, even those that
are supposed to be resolved during static linking and which won't be visible
to libbpf. With BTF information always present, static linker will check not
just ELF symbol matches, but entire BTF type signature match as well. That
logic is stricter that BPF CO-RE checks. It probably should be re-used by
.ksym resolution logic in libbpf as well, but that's left for follow up
patches.

To make it unnecessary to rewrite ELF symbols and minimize BTF type
rewriting/removal, ELF symbols that correspond to externs initially will be
updated in place once they are resolved. Similarly for BTF type info, VAR/FUNC
and var_secinfo's (sec_vars in struct bpf_linker) are staying stable, but
types they point to might get replaced when extern is resolved. This might
leave some left-over types (even though we try to minimize this for common
cases of having extern funcs with not argument names vs concrete function with
names properly specified). That can be addresses later with a generic BTF
garbage collection. That's left for a follow up as well.

Given BTF type appending phase is separate from ELF symbol
appending/resolution, special struct glob_sym->underlying_btf_id variable is
used to communicate resolution and rewrite decisions. 0 means
underlying_btf_id needs to be appended (it's not yet in final linker->btf), <0
values are used for temporary storage of source BTF type ID (not yet
rewritten), so -glob_sym->underlying_btf_id is BTF type id in obj-btf. But by
the end of linker_append_btf() phase, that underlying_btf_id will be remapped
and will always be > 0. This is the uglies part of the whole process, but
keeps the other parts much simpler due to stability of sec_var and VAR/FUNC
types, as well as ELF symbol, so please keep that in mind while reviewing.

BTF-defined maps require some extra custom logic and is addressed separate in
the next patch, so that to keep this one smaller and easier to review.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-12-andrii@kernel.org
2021-04-23 14:05:27 -07:00
Andrii Nakryiko 83a157279f libbpf: Tighten BTF type ID rewriting with error checking
It should never fail, but if it does, it's better to know about this rather
than end up with nonsensical type IDs.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-11-andrii@kernel.org
2021-04-23 14:05:27 -07:00
Andrii Nakryiko 386b1d241e libbpf: Extend sanity checking ELF symbols with externs validation
Add logic to validate extern symbols, plus some other minor extra checks, like
ELF symbol #0 validation, general symbol visibility and binding validations.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-10-andrii@kernel.org
2021-04-23 14:05:26 -07:00
Andrii Nakryiko 42869d2852 libbpf: Make few internal helpers available outside of libbpf.c
Make skip_mods_and_typedefs(), btf_kind_str(), and btf_func_linkage() helpers
available outside of libbpf.c, to be used by static linker code.

Also do few cleanups (error code fixes, comment clean up, etc) that don't
deserve their own commit.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-9-andrii@kernel.org
2021-04-23 14:05:26 -07:00
Andrii Nakryiko beaa3711ad libbpf: Factor out symtab and relos sanity checks
Factor out logic for sanity checking SHT_SYMTAB and SHT_REL sections into
separate sections. They are already quite extensive and are suffering from too
deep indentation. Subsequent changes will extend SYMTAB sanity checking
further, so it's better to factor each into a separate function.

No functional changes are intended.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-8-andrii@kernel.org
2021-04-23 14:05:26 -07:00
Andrii Nakryiko c7ef5ec957 libbpf: Refactor BTF map definition parsing
Refactor BTF-defined maps parsing logic to allow it to be nicely reused by BPF
static linker. Further, at least for BPF static linker, it's important to know
which attributes of a BPF map were defined explicitly, so provide a bit set
for each known portion of BTF map definition. This allows BPF static linker to
do a simple check when dealing with extern map declarations.

The same capabilities allow to distinguish attributes explicitly set to zero
(e.g., __uint(max_entries, 0)) vs the case of not specifying it at all (no
max_entries attribute at all). Libbpf is currently not utilizing that, but it
could be useful for backwards compatibility reasons later.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-7-andrii@kernel.org
2021-04-23 14:05:26 -07:00
Andrii Nakryiko 6245947c1b libbpf: Allow gaps in BPF program sections to support overriden weak functions
Currently libbpf is very strict about parsing BPF program instruction
sections. No gaps are allowed between sequential BPF programs within a given
ELF section. Libbpf enforced that by keeping track of the next section offset
that should start a new BPF (sub)program and cross-checks that by searching
for a corresponding STT_FUNC ELF symbol.

But this is too restrictive once we allow to have weak BPF programs and link
together two or more BPF object files. In such case, some weak BPF programs
might be "overridden" by either non-weak BPF program with the same name and
signature, or even by another weak BPF program that just happened to be linked
first. That, in turn, leaves BPF instructions of the "lost" BPF (sub)program
intact, but there is no corresponding ELF symbol, because no one is going to
be referencing it.

Libbpf already correctly handles such cases in the sense that it won't append
such dead code to actual BPF programs loaded into kernel. So the only change
that needs to be done is to relax the logic of parsing BPF instruction
sections. Instead of assuming next BPF (sub)program section offset, iterate
available STT_FUNC ELF symbols to discover all available BPF subprograms and
programs.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-6-andrii@kernel.org
2021-04-23 14:05:26 -07:00
Andrii Nakryiko aea28a602f libbpf: Mark BPF subprogs with hidden visibility as static for BPF verifier
Define __hidden helper macro in bpf_helpers.h, which is a short-hand for
__attribute__((visibility("hidden"))). Add libbpf support to mark BPF
subprograms marked with __hidden as static in BTF information to enforce BPF
verifier's static function validation algorithm, which takes more information
(caller's context) into account during a subprogram validation.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-5-andrii@kernel.org
2021-04-23 14:05:26 -07:00
Andrii Nakryiko 0fec7a3cee libbpf: Suppress compiler warning when using SEC() macro with externs
When used on externs SEC() macro will trigger compilation warning about
inapplicable `__attribute__((used))`. That's expected for extern declarations,
so suppress it with the corresponding _Pragma.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-4-andrii@kernel.org
2021-04-23 14:05:26 -07:00
Andrii Nakryiko 5b438f01d7 bpftool: Dump more info about DATASEC members
Dump succinct information for each member of DATASEC: its kinds and name. This
is extremely helpful to see at a quick glance what is inside each DATASEC of
a given BTF. Without this, one has to jump around BTF data to just find out
the name of a VAR or FUNC. DATASEC's var_secinfo member is special in that
regard because it doesn't itself contain the name of the member, delegating
that to the referenced VAR and FUNC kinds. Other kinds, like
STRUCT/UNION/FUNC/ENUM, encode member names directly and thus are clearly
identifiable in BTF dump.

The new output looks like this:

[35] DATASEC '.bss' size=0 vlen=6
        type_id=8 offset=0 size=4 (VAR 'input_bss1')
        type_id=13 offset=0 size=4 (VAR 'input_bss_weak')
        type_id=16 offset=0 size=4 (VAR 'output_bss1')
        type_id=17 offset=0 size=4 (VAR 'output_data1')
        type_id=18 offset=0 size=4 (VAR 'output_rodata1')
        type_id=20 offset=0 size=8 (VAR 'output_sink1')
[36] DATASEC '.data' size=0 vlen=2
        type_id=9 offset=0 size=4 (VAR 'input_data1')
        type_id=14 offset=0 size=4 (VAR 'input_data_weak')
[37] DATASEC '.kconfig' size=0 vlen=2
        type_id=25 offset=0 size=4 (VAR 'LINUX_KERNEL_VERSION')
        type_id=28 offset=0 size=1 (VAR 'CONFIG_BPF_SYSCALL')
[38] DATASEC '.ksyms' size=0 vlen=1
        type_id=30 offset=0 size=1 (VAR 'bpf_link_fops')
[39] DATASEC '.rodata' size=0 vlen=2
        type_id=12 offset=0 size=4 (VAR 'input_rodata1')
        type_id=15 offset=0 size=4 (VAR 'input_rodata_weak')
[40] DATASEC 'license' size=0 vlen=1
        type_id=24 offset=0 size=4 (VAR 'LICENSE')

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-3-andrii@kernel.org
2021-04-23 14:05:26 -07:00
Andrii Nakryiko 0dd7e456bb bpftool: Support dumping BTF VAR's "extern" linkage
Add dumping of "extern" linkage for BTF VAR kind. Also shorten
"global-allocated" to "global" to be in line with FUNC's "global".

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-2-andrii@kernel.org
2021-04-23 14:05:25 -07:00
Petr Machata 1233898ab7 selftests: mlxsw: Fix mausezahn invocation in ERSPAN scale test
The mirror_gre_scale test creates as many ERSPAN sessions as the underlying
chip supports, and tests that they all work. In order to determine that it
issues a stream of ICMP packets and checks if they are mirrored as
expected.

However, the mausezahn invocation missed the -6 flag to identify the use of
IPv6 protocol, and was sending ICMP messages over IPv6, as opposed to
ICMP6. It also didn't pass an explicit source IP address, which apparently
worked at some point in the past, but does not anymore.

To fix these issues, extend the function mirror_test() in mirror_lib by
detecting the IPv6 protocol addresses, and using a different ICMP scheme.
Fix __mirror_gre_test() in the selftest itself to pass a source IP address.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23 14:01:28 -07:00
Petr Machata dda7f4fa55 selftests: mlxsw: Increase the tolerance of backlog buildup
The intention behind this test is to make sure that qdisc limit is
correctly projected to the HW. However, first, due to rounding in the
qdisc, and then in the driver, the number cannot actually be accurate. And
second, the approach to testing this is to oversubscribe the port with
traffic generated on the same switch. The actual backlog size therefore
fluctuates.

In practice, this test proved to be noisier than the rest, and spuriously
fails every now and then. Increase the tolerance to 10 % to avoid these
issues.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23 14:01:28 -07:00
Danielle Ratson 059b18e21c selftests: mlxsw: Return correct error code in resource scale tests
Currently, the resource scale test checks a few cases, when the error code
resets between the cases. So for example, if one case fails and the
consecutive case passes, the error code eventually will fit the last test
and will be 0.

Save a new return code that will hold the 'or' return codes of all the
cases, so the final return code will consider all the cases.

Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23 14:01:28 -07:00
Danielle Ratson 1f1c92139e selftests: mlxsw: Remove a redundant if statement in tc_flower_scale test
Currently, the error return code of the failure condition is lost after
using an if statement, so the test doesn't fail when it should.

Remove the if statement that separates the condition and the error code
check, so the test won't always pass.

Fixes: abfce9e062 ("selftests: mlxsw: Reduce running time using offload indication")
Reported-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23 14:01:28 -07:00
Danielle Ratson b6fc2f2121 selftests: mlxsw: Remove a redundant if statement in port_scale test
Currently, the error return code of the failure condition is lost after
using an if statement, so the test doesn't fail when it should.

Remove the if statement that separates the condition and the error code
check, so the test won't always pass.

Fixes: 5154b1b826 ("selftests: mlxsw: Add a scale test for physical ports")
Reported-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23 14:01:28 -07:00
Petr Machata c8d0260cdd selftests: net: mirror_gre_vlan_bridge_1q: Make an FDB entry static
The FDB roaming test installs a destination MAC address on the wrong
interface of an FDB database and tests whether the mirroring fails, because
packets are sent to the wrong port. The test by mistake installs the FDB
entry as local. This worked previously, because drivers were notified of
local FDB entries in the same way as of static entries. However that has
been fixed in the commit 6ab4c3117a ("net: bridge: don't notify switchdev
for local FDB addresses"), and local entries are not notified anymore. As a
result, the HW is not reconfigured for the FDB roam, and mirroring keeps
working, failing the test.

To fix the issue, mark the FDB entry as static.

Fixes: 9c7c8a8244 ("selftests: forwarding: mirror_gre_vlan_bridge_1q: Add more tests")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23 14:01:28 -07:00
Zhen Lei c6f8714125 perf map: Fix error return code in maps__clone()
Although 'err' has been initialized to -ENOMEM, but it will be reassigned
by the "err = unwind__prepare_access(...)" statement in the for loop. So
that, the value of 'err' is unknown when map__clone() failed.

Fixes: 6c50258443 ("perf unwind: Call unwind__prepare_access for forked thread")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: zhen lei <thunder.leizhen@huawei.com>
Link: http://lore.kernel.org/lkml/20210415092744.3793-1-thunder.leizhen@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-23 16:03:09 -03:00
Thomas Richter 671b60cb6a perf ftrace: Fix access to pid in array when setting a pid filter
Command 'perf ftrace -v -- ls' fails in s390 (at least 5.12.0rc6).

The root cause is a missing pointer dereference which causes an
array element address to be used as PID.

Fix this by extracting the PID.

Output before:
  # ./perf ftrace -v -- ls
  function_graph tracer is used
  write '-263732416' to tracing/set_ftrace_pid failed: Invalid argument
  failed to set ftrace pid
  #

Output after:
   ./perf ftrace -v -- ls
   function_graph tracer is used
   # tracer: function_graph
   #
   # CPU  DURATION                  FUNCTION CALLS
   # |     |   |                     |   |   |   |
   4)               |  rcu_read_lock_sched_held() {
   4)   0.552 us    |    rcu_lockdep_current_cpu_online();
   4)   6.124 us    |  }

Reported-by: Alexander Schmidt <alexschm@de.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20210421120400.2126433-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-23 15:58:10 -03:00
Leo Yan b14585d9f1 perf auxtrace: Fix potential NULL pointer dereference
In the function auxtrace_parse_snapshot_options(), the callback pointer
"itr->parse_snapshot_options" can be NULL if it has not been set during
the AUX record initialization.  This can cause tool crashing if the
callback pointer "itr->parse_snapshot_options" is dereferenced without
performing NULL check.

Add a NULL check for the pointer "itr->parse_snapshot_options" before
invoke the callback.

Fixes: d20031bb63 ("perf tools: Add AUX area tracing Snapshot Mode")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: http://lore.kernel.org/lkml/20210420151554.2031768-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-23 15:34:32 -03:00
Paolo Bonzini c4f71901d5 KVM/arm64 updates for Linux 5.13
New features:
 
 - Stage-2 isolation for the host kernel when running in protected mode
 - Guest SVE support when running in nVHE mode
 - Force W^X hypervisor mappings in nVHE mode
 - ITS save/restore for guests using direct injection with GICv4.1
 - nVHE panics now produce readable backtraces
 - Guest support for PTP using the ptp_kvm driver
 - Performance improvements in the S2 fault handler
 - Alexandru is now a reviewer (not really a new feature...)
 
 Fixes:
 - Proper emulation of the GICR_TYPER register
 - Handle the complete set of relocation in the nVHE EL2 object
 - Get rid of the oprofile dependency in the PMU code (and of the
   oprofile body parts at the same time)
 - Debug and SPE fixes
 - Fix vcpu reset
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAmCCpuAPHG1hekBrZXJu
 ZWwub3JnAAoJECPQ0LrRPXpD2G8QALWQYeBggKnNmAJfuihzZ2WariBmgcENs2R2
 qNZ/Py6dIF+b69P68nmgrEV1x2Kp35cPJbBwXnnrS4FCB5tk0b8YMaj00QbiRIYV
 UXbPxQTmYO1KbevpoEcw8NmR4bZJ/hRYPuzcQG7CCMKIZw0zj2cMcBofzQpTOAp/
 CgItdcv7at3iwamQatfU9vUmC0nDdnjdIwSxTAJOYMVV1ENwtnYSNgZVo4XLTg7n
 xR/5Qx27PKBJw7GyTRAIIxKAzNXG2tDL+GVIHe4AnRp3z3La8sr6PJf7nz9MCmco
 ISgeY7EGQINzmm4LahpnV+2xwwxOWo8QotxRFGNuRTOBazfARyAbp97yJ6eXJUpa
 j0qlg3xK9neyIIn9BQKkKx4sY9V45yqkuVDsK6odmqPq3EE01IMTRh1N/XQi+sTF
 iGrlM3ZW4AjlT5zgtT9US/FRXeDKoYuqVCObJeXZdm3sJSwEqTAs0JScnc0YTsh7
 m30CODnomfR2y5X6GoaubbQ0wcZ2I20K1qtIm+2F6yzD5P1/3Yi8HbXMxsSWyYWZ
 1ldoSa+ZUQlzV9Ot0S3iJ4PkphLKmmO96VlxE2+B5gQG50PZkLzsr8bVyYOuJC8p
 T83xT9xd07cy+FcGgF9veZL99Y6BLHMa6ZwFUolYNbzJxqrmqyR1aiJMEBIcX+aP
 ACeKW1w5
 =fpey
 -----END PGP SIGNATURE-----

Merge tag 'kvmarm-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 updates for Linux 5.13

New features:

- Stage-2 isolation for the host kernel when running in protected mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
- Alexandru is now a reviewer (not really a new feature...)

Fixes:
- Proper emulation of the GICR_TYPER register
- Handle the complete set of relocation in the nVHE EL2 object
- Get rid of the oprofile dependency in the PMU code (and of the
  oprofile body parts at the same time)
- Debug and SPE fixes
- Fix vcpu reset
2021-04-23 07:41:17 -04:00
Marco Elver 3ddb3fd8cd signal, perf: Fix siginfo_t by avoiding u64 on 32-bit architectures
The alignment of a structure is that of its largest member. On
architectures like 32-bit Arm (but not e.g. 32-bit x86) 64-bit integers
will require 64-bit alignment and not its natural word size.

This means that there is no portable way to add 64-bit integers to
siginfo_t on 32-bit architectures without breaking the ABI, because
siginfo_t does not yet (and therefore likely never will) contain 64-bit
fields on 32-bit architectures. Adding a 64-bit integer could change the
alignment of the union after the 3 initial int si_signo, si_errno,
si_code, thus introducing 4 bytes of padding shifting the entire union,
which would break the ABI.

One alternative would be to use the __packed attribute, however, it is
non-standard C. Given siginfo_t has definitions outside the Linux kernel
in various standard libraries that can be compiled with any number of
different compilers (not just those we rely on), using non-standard
attributes on siginfo_t should be avoided to ensure portability.

In the case of the si_perf field, word size is sufficient since there is
no exact requirement on size, given the data it contains is user-defined
via perf_event_attr::sig_data. On 32-bit architectures, any excess bits
of perf_event_attr::sig_data will therefore be truncated when copying
into si_perf.

Since si_perf is intended to disambiguate events (e.g. encoding relevant
information if there are more events of the same type), 32 bits should
provide enough entropy to do so on 32-bit architectures.

For 64-bit architectures, no change is intended.

Fixes: fb6cc127e0 ("signal: Introduce TRAP_PERF si_code and si_perf to siginfo")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lkml.kernel.org/r/20210422191823.79012-1-elver@google.com
2021-04-23 09:03:16 +02:00
Mickaël Salaün 3532b0b435 landlock: Enable user space to infer supported features
Add a new flag LANDLOCK_CREATE_RULESET_VERSION to
landlock_create_ruleset(2).  This enables to retreive a Landlock ABI
version that is useful to efficiently follow a best-effort security
approach.  Indeed, it would be a missed opportunity to abort the whole
sandbox building, because some features are unavailable, instead of
protecting users as much as possible with the subset of features
provided by the running kernel.

This new flag enables user space to identify the minimum set of Landlock
features supported by the running kernel without relying on a filesystem
interface (e.g. /proc/version, which might be inaccessible) nor testing
multiple syscall argument combinations (i.e. syscall bisection).  New
Landlock features will be documented and tied to a minimum version
number (greater than 1).  The current version will be incremented for
each new kernel release supporting new Landlock features.  User space
libraries can leverage this information to seamlessly restrict processes
as much as possible while being compatible with newer APIs.

This is a much more lighter approach than the previous
landlock_get_features(2): the complexity is pushed to user space
libraries.  This flag meets similar needs as securityfs versions:
selinux/policyvers, apparmor/features/*/version* and tomoyo/version.

Supporting this flag now will be convenient for backward compatibility.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: James Morris <jmorris@namei.org>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Serge E. Hallyn <serge@hallyn.com>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Link: https://lore.kernel.org/r/20210422154123.13086-14-mic@digikod.net
Signed-off-by: James Morris <jamorris@linux.microsoft.com>
2021-04-22 12:22:11 -07:00
Mickaël Salaün e1199815b4 selftests/landlock: Add user space tests
Test all Landlock system calls, ptrace hooks semantic and filesystem
access-control with multiple layouts.

Test coverage for security/landlock/ is 93.6% of lines.  The code not
covered only deals with internal kernel errors (e.g. memory allocation)
and race conditions.

Cc: James Morris <jmorris@namei.org>
Cc: Jann Horn <jannh@google.com>
Cc: Serge E. Hallyn <serge@hallyn.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Reviewed-by: Vincent Dagonneau <vincent.dagonneau@ssi.gouv.fr>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210422154123.13086-11-mic@digikod.net
Signed-off-by: James Morris <jamorris@linux.microsoft.com>
2021-04-22 12:22:11 -07:00
Ray Kinsella a4b0fccfbd perf tools: Update topdown documentation to permit rdpmc calls
Update Topdown documentation to permit calls to rdpmc, and describe
interaction with system calls.

Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: http://lore.kernel.org/lkml/20210421091009.1711565-1-mdr@ashroe.eu
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-22 16:09:39 -03:00
Paolo Bonzini fd49e8ee70 Merge branch 'kvm-sev-cgroup' into HEAD 2021-04-22 13:19:01 -04:00
Yang Li 0db1146167 selftests/powerpc: remove unneeded semicolon
Eliminate the following coccicheck warning:
./tools/testing/selftests/powerpc/nx-gzip/gzfht_test.c:327:4-5: Unneeded
semicolon

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1612780870-95890-1-git-send-email-yang.lee@linux.alibaba.com
2021-04-23 01:38:04 +10:00
Ravi Bangoria 290f7d8ce2 powerpc/selftests: Add selftest to test concurrent perf/ptrace events
ptrace and perf watchpoints can't co-exists if their address range
overlaps. See commit 29da4f91c0 ("powerpc/watchpoint: Don't allow
concurrent perf and ptrace events") for more detail. Add selftest
for the same.

Sample o/p:
  # ./ptrace-perf-hwbreak
  test: ptrace-perf-hwbreak
  tags: git_version:powerpc-5.8-7-118-g937fa174a15d-dirty
  perf cpu event -> ptrace thread event (Overlapping): Ok
  perf cpu event -> ptrace thread event (Non-overlapping): Ok
  perf thread event -> ptrace same thread event (Overlapping): Ok
  perf thread event -> ptrace same thread event (Non-overlapping): Ok
  perf thread event -> ptrace other thread event: Ok
  ptrace thread event -> perf kernel event: Ok
  ptrace thread event -> perf same thread event (Overlapping): Ok
  ptrace thread event -> perf same thread event (Non-overlapping): Ok
  ptrace thread event -> perf other thread event: Ok
  ptrace thread event -> perf cpu event (Overlapping): Ok
  ptrace thread event -> perf cpu event (Non-overlapping): Ok
  ptrace thread event -> perf same thread & cpu event (Overlapping): Ok
  ptrace thread event -> perf same thread & cpu event (Non-overlapping): Ok
  ptrace thread event -> perf other thread & cpu event: Ok
  success: ptrace-perf-hwbreak

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412112218.128183-5-ravi.bangoria@linux.ibm.com
2021-04-23 01:38:03 +10:00
Ravi Bangoria c65c64cc7b powerpc/selftests/perf-hwbreak: Add testcases for 2nd DAWR
Extend perf-hwbreak.c selftest to test multiple DAWRs. Also add
testcase for testing 512 byte boundary removal.

Sample o/p:
  # ./perf-hwbreak
  ...
  TESTED: Process specific, Two events, diff addr
  TESTED: Process specific, Two events, same addr
  TESTED: Process specific, Two events, diff addr, one is RO, other is WO
  TESTED: Process specific, Two events, same addr, one is RO, other is WO
  TESTED: Systemwide, Two events, diff addr
  TESTED: Systemwide, Two events, same addr
  TESTED: Systemwide, Two events, diff addr, one is RO, other is WO
  TESTED: Systemwide, Two events, same addr, one is RO, other is WO
  TESTED: Process specific, 512 bytes, unaligned
  success: perf_hwbreak

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412112218.128183-4-ravi.bangoria@linux.ibm.com
2021-04-23 01:38:03 +10:00
Ravi Bangoria c9cb0afb4e powerpc/selftests/perf-hwbreak: Coalesce event creation code
perf-hwbreak selftest opens hw-breakpoint event at multiple places for
which it has same code repeated. Coalesce that code into a function.

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412112218.128183-3-ravi.bangoria@linux.ibm.com
2021-04-23 01:38:03 +10:00
Ravi Bangoria dae4ff8031 powerpc/selftests/ptrace-hwbreak: Add testcases for 2nd DAWR
Message-ID: <20210412112218.128183-2-ravi.bangoria@linux.ibm.com> (raw)

Add selftests to test multiple active DAWRs with ptrace interface.

Sample o/p:
  $ ./ptrace-hwbreak
  ...
  PPC_PTRACE_SETHWDEBUG 2, MODE_RANGE, DW ALIGNED, WO, len: 6: Ok
  PPC_PTRACE_SETHWDEBUG 2, MODE_RANGE, DW UNALIGNED, RO, len: 6: Ok
  PPC_PTRACE_SETHWDEBUG 2, MODE_RANGE, DAWR Overlap, WO, len: 6: Ok
  PPC_PTRACE_SETHWDEBUG 2, MODE_RANGE, DAWR Overlap, RO, len: 6: Ok

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
[mpe: Fix build on older distros]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2021-04-23 01:38:03 +10:00
Thadeu Lima de Souza Cascardo da650ada10 selftests/powerpc: Add uaccess flush test
Also based on the RFI and entry flush tests, it counts the L1D misses
by doing a syscall that does user access: uname, in this case.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
[dja: forward port, rename function]
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210225061949.1213404-1-dja@axtens.net
2021-04-23 01:38:03 +10:00
Quanyang Wang bc2e9578ba
spi: tools: make a symbolic link to the header file spi.h
The header file spi.h in include/uapi/linux/spi is needed for spidev.h,
so we also need make a symbolic link to it to eliminate the error message
as below:

In file included from spidev_test.c:24:
include/linux/spi/spidev.h:28:10: fatal error: linux/spi/spi.h: No such file or directory
   28 | #include <linux/spi/spi.h>
      |          ^~~~~~~~~~~~~~~~~
compilation terminated.

Fixes: f7005142da ("spi: uapi: unify SPI modes into a single spi.h")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Link: https://lore.kernel.org/r/20210422102604.3034217-1-quanyang.wang@windriver.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-22 16:30:39 +01:00
Paolo Bonzini bf1e15a82e KVM: selftests: Always run vCPU thread with blocked SIG_IPI
The main thread could start to send SIG_IPI at any time, even before signal
blocked on vcpu thread.  Therefore, start the vcpu thread with the signal
blocked.

Without this patch, on very busy cores the dirty_log_test could fail directly
on receiving a SIGUSR1 without a handler (when vcpu runs far slower than main).

Reported-by: Peter Xu <peterx@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-04-21 12:20:02 -04:00
Peter Xu 016ff1a442 KVM: selftests: Sync data verify of dirty logging with guest sync
This fixes a bug that can trigger with e.g. "taskset -c 0 ./dirty_log_test" or
when the testing host is very busy.

A similar previous attempt is done [1] but that is not enough, the reason is
stated in the reply [2].

As a summary (partly quotting from [2]):

The problem is I think one guest memory write operation (of this specific test)
contains a few micro-steps when page is during kvm dirty tracking (here I'm
only considering write-protect rather than pml but pml should be similar at
least when the log buffer is full):

  (1) Guest read 'iteration' number into register, prepare to write, page fault
  (2) Set dirty bit in either dirty bitmap or dirty ring
  (3) Return to guest, data written

When we verify the data, we assumed that all these steps are "atomic", say,
when (1) happened for this page, we assume (2) & (3) must have happened.  We
had some trick to workaround "un-atomicity" of above three steps, as previous
version of this patch wanted to fix atomicity of step (2)+(3) by explicitly
letting the main thread wait for at least one vmenter of vcpu thread, which
should work.  However what I overlooked is probably that we still have race
when (1) and (2) can be interrupted.

One example calltrace when it could happen that we read an old interation, got
interrupted before even setting the dirty bit and flushing data:

    __schedule+1742
    __cond_resched+52
    __get_user_pages+530
    get_user_pages_unlocked+197
    hva_to_pfn+206
    try_async_pf+132
    direct_page_fault+320
    kvm_mmu_page_fault+103
    vmx_handle_exit+288
    vcpu_enter_guest+2460
    kvm_arch_vcpu_ioctl_run+325
    kvm_vcpu_ioctl+526
    __x64_sys_ioctl+131
    do_syscall_64+51
    entry_SYSCALL_64_after_hwframe+68

It means iteration number cached in vcpu register can be very old when dirty
bit set and data flushed.

So far I don't see an easy way to guarantee all steps 1-3 atomicity but to sync
at the GUEST_SYNC() point of guest code when we do verification of the dirty
bits as what this patch does.

[1] https://lore.kernel.org/lkml/20210413213641.23742-1-peterx@redhat.com/
[2] https://lore.kernel.org/lkml/20210417140956.GV4440@xz-x1/

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Andrew Jones <drjones@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210417143602.215059-2-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-04-21 12:20:02 -04:00
Christophe Leroy f56607e85e selftests/timens: Fix gettime_perf to work on powerpc
On powerpc:
- VDSO library is named linux-vdso32.so.1 or linux-vdso64.so.1
- clock_gettime is named __kernel_clock_gettime()

Ensure gettime_perf tries these names before giving up.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/469f37ab91984309eb68c0fb47e8438cdf5b6463.1617198956.git.christophe.leroy@csgroup.eu
2021-04-21 22:52:32 +10:00
Petr Machata 0a4d0cb1a3 selftests: mlxsw: sch_red_ets: Test proper counter cleaning in ETS
There was a bug introduced during the rework which cause non-zero backlog
being stuck at ETS. Introduce a selftest that would have caught the issue
earlier.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-20 16:43:13 -07:00
Jiri Olsa d044d9fc13 selftests/bpf: Add docs target as all dependency
Currently docs target is make dependency for TEST_GEN_FILES,
which makes tests to be rebuilt every time you run make.

Adding docs as all target dependency, so when running make
on top of built selftests it will show just:

  $ make
  make[1]: Nothing to be done for 'docs'.

After cleaning docs, only docs is rebuilt:

  $ make docs-clean
  CLEAN    eBPF_helpers-manpage
  CLEAN    eBPF_syscall-manpage
  $ make
  GEN      ...selftests/bpf/bpf-helpers.rst
  GEN      ...selftests/bpf/bpf-helpers.7
  GEN      ...selftests/bpf/bpf-syscall.rst
  GEN      ...selftests/bpf/bpf-syscall.2
  $ make
  make[1]: Nothing to be done for 'docs'.

Fixes: a01d935b2e ("tools/bpf: Remove bpf-helpers from bpftool docs")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210420132428.15710-1-jolsa@kernel.org
2021-04-20 15:01:59 -07:00
Zhen Lei f2211881e7 perf data: Fix error return code in perf_data__create_dir()
Although 'ret' has been initialized to -1, but it will be reassigned by
the "ret = open(...)" statement in the for loop. So that, the value of
'ret' is unknown when asprintf() failed.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210415083417.3740-1-thunder.leizhen@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-20 14:46:48 -03:00
Arnaldo Carvalho de Melo bb7db8699b perf tools: Add a build-test variant to use in builds from a tarball
To use in automated tests inside containers from a tarball generated
by 'make perf-tar-src-pkg*', where testing building from a tarball
is obviously not needed, so add a 'build-test-tarball' for that case.

And don't build with gtk2 as this complicates things for cross builds
where we don't always have all the libraries a full perf build requires
available for the target arch, ditto for static builds.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-20 08:43:58 -03:00
Zhen Lei 59a1a843b0 perf data: Fix error return code in perf_data__create_dir()
Although 'ret' has been initialized to -1, but it will be reassigned by
the "ret = open(...)" statement in the for loop. So that, the value of
'ret' is unknown when asprintf() failed.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210415083417.3740-1-thunder.leizhen@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-20 08:40:20 -03:00
Ian Rogers b96da02bd6 perf arm64: Fix off-by-one directory paths.
Relative path include works in the regular build due to -I paths but may
break in other situations.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20210416214113.552252-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-20 08:40:20 -03:00
Martin Liška f89a82a82b perf annotate: Add line number like in TUI and source location at EOL
The patch changes the output format in 2 ways:
- line number is displayed for all source lines (matching TUI mode)
- source locations for the hottest lines are printed
   at the line end in order to preserve layout

Before:

     0.00 :   405ef1: inc    %r15
          :            tmpsd * (TD + tmpsd * TDD)));
     0.01 :   405ef4: vfmadd213sd 0x2b9b3(%rip),%xmm0,%xmm3        # 4318b0 <_IO_stdin_used+0x8b0>
          :            tmpsd * (TC +
  eff.c:1811    0.67 :   405efd: vfmadd213sd 0x2b9b2(%rip),%xmm0,%xmm3        # 4318b8 <_IO_stdin_used+0x8b8>
          :            TA + tmpsd * (TB +
     0.35 :   405f06: vfmadd213sd 0x2b9b1(%rip),%xmm0,%xmm3        # 4318c0 <_IO_stdin_used+0x8c0>
          :            dumbo =
  eff.c:1809    1.41 :   405f0f: vfmadd213sd 0x2b9b0(%rip),%xmm0,%xmm3        # 4318c8 <_IO_stdin_used+0x8c8>
          :            sumi -= sj * tmpsd * dij2i * dumbo;
  eff.c:1813    2.58 :   405f18: vmulsd %xmm3,%xmm0,%xmm0
     2.81 :   405f1c: vfnmadd213sd 0x30(%rsp),%xmm1,%xmm0
     3.78 :   405f23: vmovsd %xmm0,0x30(%rsp)
          :            for (k = 0; k < lpears[i] + upears[i]; k++) {
  eff.c:1761    0.90 :   405f29: cmp    %r15d,%r12d

After:

     0.00 :   405ef1: inc    %r15
          : 1812   tmpsd * (TD + tmpsd * TDD)));
     0.01 :   405ef4: vfmadd213sd 0x2b9b3(%rip),%xmm0,%xmm3        # 4318b0 <_IO_stdin_used+0x8b0>
          : 1811   tmpsd * (TC +
     0.67 :   405efd: vfmadd213sd 0x2b9b2(%rip),%xmm0,%xmm3        # 4318b8 <_IO_stdin_used+0x8b8> // eff.c:1811
          : 1810   TA + tmpsd * (TB +
     0.35 :   405f06: vfmadd213sd 0x2b9b1(%rip),%xmm0,%xmm3        # 4318c0 <_IO_stdin_used+0x8c0>
          : 1809   dumbo =
     1.41 :   405f0f: vfmadd213sd 0x2b9b0(%rip),%xmm0,%xmm3        # 4318c8 <_IO_stdin_used+0x8c8> // eff.c:1809
          : 1813   sumi -= sj * tmpsd * dij2i * dumbo;
     2.58 :   405f18: vmulsd %xmm3,%xmm0,%xmm0 // eff.c:1813
     2.81 :   405f1c: vfnmadd213sd 0x30(%rsp),%xmm1,%xmm0
     3.78 :   405f23: vmovsd %xmm0,0x30(%rsp)
          : 1761   for (k = 0; k < lpears[i] + upears[i]; k++) {

Where e.g. '// eff.c:1811' shares the same color as the percentantage
at the line beginning.

Signed-off-by: Martin Liška <mliska@suse.cz>
Link: http://lore.kernel.org/lkml/a0d53f31-f633-5013-c386-a4452391b081@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-20 08:40:20 -03:00
Alexander Antonov 537f1e38f3 perf: Update .gitignore file
After a "make -C tools/perf", git reports the following untracked file:
perf-iostat

Add this generated file to perf's .gitignore file.

Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey V Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210419094147.15909-5-alexander.antonov@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-20 08:40:20 -03:00
Alexander Antonov f9ed693e8b perf stat: Enable iostat mode for x86 platforms
This functionality is based on recently introduced sysfs attributes for
Intel® Xeon® Scalable processor family (code name Skylake-SP):

Commit bb42b3d397 ("perf/x86/intel/uncore: Expose an Uncore unit to IIO PMON mapping")

Mode is intended to provide four I/O performance metrics in MB per each
PCIe root port:

 - Inbound Read: I/O devices below root port read from the host memory
 - Inbound Write: I/O devices below root port write to the host memory
 - Outbound Read: CPU reads from I/O devices below root port
 - Outbound Write: CPU writes to I/O devices below root port

Each metric requiries only one uncore event which increments at every 4B
transfer in corresponding direction. The formulas to compute metrics
are generic:
    #EventCount * 4B / (1024 * 1024)

Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey V Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210419094147.15909-4-alexander.antonov@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-20 08:40:20 -03:00
Alexander Antonov 19776d3ced perf stat: Helper functions for PCIe root ports list in iostat mode
Introduce helper functions to control PCIe root ports list.
These helpers will be used in the follow-up patch.

Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey V Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210419094147.15909-3-alexander.antonov@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-20 08:40:20 -03:00
Alexander Antonov f07952b179 perf stat: Basic support for iostat in perf
Add basic flow for a new iostat mode in perf. Mode is intended to
provide four I/O performance metrics per each PCIe root port: Inbound Read,
Inbound Write, Outbound Read, Outbound Write.

The actual code to compute the metrics and attribute it to
root port is in follow-on patches.

Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey V Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210419094147.15909-2-alexander.antonov@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-20 08:40:20 -03:00
Kajol Jain 32daa5d789 perf vendor events: Initial JSON/events list for power10 platform
Patch adds initial JSON/events for POWER10.

Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Paul Clarke <pc@us.ibm.com>
Tested-by: Paul Clarke <pc@us.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/lkml/20210419112001.71466-1-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-20 08:40:20 -03:00
Rob Herring 818869489b libperf xyarray: Add bounds checks to xyarray__entry()
xyarray__entry() is missing any bounds checking yet often the x and y
parameters come from external callers. Add bounds checks and an
unchecked __xyarray__entry().

Committer notes:

Make the 'x' and 'y' arguments to the new xyarray__entry() that does
bounds check to be of type 'size_t', so that we cover also the case
where 'x' and 'y' could be negative, which is needed anyway as having
them as 'int' breaks the build with:

  /home/acme/git/perf/tools/lib/perf/include/internal/xyarray.h: In function ‘xyarray__entry’:
  /home/acme/git/perf/tools/lib/perf/include/internal/xyarray.h:28:8: error: comparison of integer expressions of different signedness: ‘int’ and ‘size_t’ {aka ‘long unsigned int’} [-Werror=sign-compare]
     28 |  if (x >= xy->max_x || y >= xy->max_y)
        |        ^~
  /home/acme/git/perf/tools/lib/perf/include/internal/xyarray.h:28:26: error: comparison of integer expressions of different signedness: ‘int’ and ‘size_t’ {aka ‘long unsigned int’} [-Werror=sign-compare]
     28 |  if (x >= xy->max_x || y >= xy->max_y)
        |                          ^~
  cc1: all warnings being treated as errors

Signed-off-by: Rob Herring <robh@kernel.org>
Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210414195758.4078803-1-robh@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-20 08:11:33 -03:00
Rob Herring 47d01e7b99 libperf: Add support for user space counter access
x86 and arm64 can both support direct access of event counters in
userspace. The access sequence is less than trivial and currently exists
in perf test code (tools/perf/arch/x86/tests/rdpmc.c) with copies in
projects such as PAPI and libpfm4.

In order to support userspace access, an event must be mmapped first
with perf_evsel__mmap(). Then subsequent calls to perf_evsel__read()
will use the fast path (assuming the arch supports it).

Committer notes:

Added a '__maybe_unused' attribute to the read_perf_counter() argument
to fix the build on arches other than x86_64 and arm.

Committer testing:

  Building and running the libperf tests in verbose mode (V=1) now shows
  those "loop = N, count = N" extra lines, testing user space counter
  access.

  # make V=1 -C tools/lib/perf tests
  make: Entering directory '/home/acme/git/perf/tools/lib/perf'
  make -f /home/acme/git/perf/tools/build/Makefile.build dir=. obj=libperf
  make -C /home/acme/git/perf/tools/lib/api/ O= libapi.a
  make -f /home/acme/git/perf/tools/build/Makefile.build dir=./fd obj=libapi
  make -f /home/acme/git/perf/tools/build/Makefile.build dir=./fs obj=libapi
  make -C tests
  gcc -I/home/acme/git/perf/tools/lib/perf/include -I/home/acme/git/perf/tools/include -I/home/acme/git/perf/tools/lib -g -Wall -o test-cpumap-a test-cpumap.c ../libperf.a /home/acme/git/perf/tools/lib/api/libapi.a
  gcc -I/home/acme/git/perf/tools/lib/perf/include -I/home/acme/git/perf/tools/include -I/home/acme/git/perf/tools/lib -g -Wall -o test-threadmap-a test-threadmap.c ../libperf.a /home/acme/git/perf/tools/lib/api/libapi.a
  gcc -I/home/acme/git/perf/tools/lib/perf/include -I/home/acme/git/perf/tools/include -I/home/acme/git/perf/tools/lib -g -Wall -o test-evlist-a test-evlist.c ../libperf.a /home/acme/git/perf/tools/lib/api/libapi.a
  gcc -I/home/acme/git/perf/tools/lib/perf/include -I/home/acme/git/perf/tools/include -I/home/acme/git/perf/tools/lib -g -Wall -o test-evsel-a test-evsel.c ../libperf.a /home/acme/git/perf/tools/lib/api/libapi.a
  gcc -I/home/acme/git/perf/tools/lib/perf/include -I/home/acme/git/perf/tools/include -I/home/acme/git/perf/tools/lib -g -Wall -L.. -o test-cpumap-so test-cpumap.c /home/acme/git/perf/tools/lib/api/libapi.a -lperf
  gcc -I/home/acme/git/perf/tools/lib/perf/include -I/home/acme/git/perf/tools/include -I/home/acme/git/perf/tools/lib -g -Wall -L.. -o test-threadmap-so test-threadmap.c /home/acme/git/perf/tools/lib/api/libapi.a -lperf
  gcc -I/home/acme/git/perf/tools/lib/perf/include -I/home/acme/git/perf/tools/include -I/home/acme/git/perf/tools/lib -g -Wall -L.. -o test-evlist-so test-evlist.c /home/acme/git/perf/tools/lib/api/libapi.a -lperf
  gcc -I/home/acme/git/perf/tools/lib/perf/include -I/home/acme/git/perf/tools/include -I/home/acme/git/perf/tools/lib -g -Wall -L.. -o test-evsel-so test-evsel.c /home/acme/git/perf/tools/lib/api/libapi.a -lperf
  make -C tests run
  running static:
  - running test-cpumap.c...OK
  - running test-threadmap.c...OK
  - running test-evlist.c...OK
  - running test-evsel.c...
  	loop = 65536, count = 333926
  	loop = 131072, count = 655781
  	loop = 262144, count = 1311141
  	loop = 524288, count = 2630126
  	loop = 1048576, count = 5256955
  	loop = 65536, count = 524594
  	loop = 131072, count = 1058916
  	loop = 262144, count = 2097458
  	loop = 524288, count = 4205429
  	loop = 1048576, count = 8406606
  OK
  running dynamic:
  - running test-cpumap.c...OK
  - running test-threadmap.c...OK
  - running test-evlist.c...OK
  - running test-evsel.c...
  	loop = 65536, count = 328102
  	loop = 131072, count = 655782
  	loop = 262144, count = 1317494
  	loop = 524288, count = 2627851
  	loop = 1048576, count = 5255187
  	loop = 65536, count = 524601
  	loop = 131072, count = 1048923
  	loop = 262144, count = 2107917
  	loop = 524288, count = 4194606
  	loop = 1048576, count = 8409322
  OK
  make: Leaving directory '/home/acme/git/perf/tools/lib/perf'
  #

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Itaru Kitayama <itaru.kitayama@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: http://lore.kernel.org/lkml/20210414155412.3697605-4-robh@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-20 08:10:45 -03:00
Yanan Wang b9c2bd50ec KVM: selftests: Add a test for kvm page table code
This test serves as a performance tester and a bug reproducer for
kvm page table code (GPA->HPA mappings), so it gives guidance for
people trying to make some improvement for kvm.

The function guest_code() can cover the conditions where a single vcpu or
multiple vcpus access guest pages within the same memory region, in three
VM stages(before dirty logging, during dirty logging, after dirty logging).
Besides, the backing src memory type(ANONYMOUS/THP/HUGETLB) of the tested
memory region can be specified by users, which means normal page mappings
or block mappings can be chosen by users to be created in the test.

If ANONYMOUS memory is specified, kvm will create normal page mappings
for the tested memory region before dirty logging, and update attributes
of the page mappings from RO to RW during dirty logging. If THP/HUGETLB
memory is specified, kvm will create block mappings for the tested memory
region before dirty logging, and split the blcok mappings into normal page
mappings during dirty logging, and coalesce the page mappings back into
block mappings after dirty logging is stopped.

So in summary, as a performance tester, this test can present the
performance of kvm creating/updating normal page mappings, or the
performance of kvm creating/splitting/recovering block mappings,
through execution time.

When we need to coalesce the page mappings back to block mappings after
dirty logging is stopped, we have to firstly invalidate *all* the TLB
entries for the page mappings right before installation of the block entry,
because a TLB conflict abort error could occur if we can't invalidate the
TLB entries fully. We have hit this TLB conflict twice on aarch64 software
implementation and fixed it. As this test can imulate process from dirty
logging enabled to dirty logging stopped of a VM with block mappings,
so it can also reproduce this TLB conflict abort due to inadequate TLB
invalidation when coalescing tables.

Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20210330080856.14940-11-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-04-20 04:18:53 -04:00
Yanan Wang a4b3c8b583 KVM: selftests: Adapt vm_userspace_mem_region_add to new helpers
With VM_MEM_SRC_ANONYMOUS_THP specified in vm_userspace_mem_region_add(),
we have to get the transparent hugepage size for HVA alignment. With the
new helpers, we can use get_backing_src_pagesz() to check whether THP is
configured and then get the exact configured hugepage size.

As different architectures may have different THP page sizes configured,
this can get the accurate THP page sizes on any platform.

Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20210330080856.14940-10-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-04-20 04:18:53 -04:00
Yanan Wang 623653b7d4 KVM: selftests: List all hugetlb src types specified with page sizes
With VM_MEM_SRC_ANONYMOUS_HUGETLB, we currently can only use system
default hugetlb pages to back the testing guest memory. In order to
add flexibility, now list all the known hugetlb backing src types with
different page sizes, so that we can specify use of hugetlb pages of the
exact granularity that we want. And as all the known hugetlb page sizes
are listed, it's appropriate for all architectures.

Besides, the helper get_backing_src_pagesz() is added to get the
granularity of different backing src types(anonumous, thp, hugetlb).

Suggested-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20210330080856.14940-9-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-04-20 04:18:53 -04:00
Yanan Wang 5579fa682a KVM: selftests: Add a helper to get system default hugetlb page size
If HUGETLB is configured in the host kernel, then we can know the system
default hugetlb page size through *cat /proc/meminfo*. Otherwise, we will
not see the information of hugetlb pages in file /proc/meminfo if it's not
configured. So add a helper to determine whether HUGETLB is configured and
then get the default page size by reading /proc/meminfo.

This helper can be useful when a program wants to use the default hugetlb
pages of the system and doesn't know the default page size.

Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20210330080856.14940-8-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-04-20 04:18:52 -04:00
Yanan Wang 3b70c4d128 KVM: selftests: Add a helper to get system configured THP page size
If we want to have some tests about transparent hugepages, the system
configured THP hugepage size should better be known by the tests, which
can be used for kinds of alignment or guest memory accessing of vcpus...
So it makes sense to add a helper to get the transparent hugepage size.

With VM_MEM_SRC_ANONYMOUS_THP specified in vm_userspace_mem_region_add(),
we now stat /sys/kernel/mm/transparent_hugepage to check whether THP is
configured in the host kernel before madvise(). Based on this, we can also
read file /sys/kernel/mm/transparent_hugepage/hpage_pmd_size to get THP
hugepage size.

Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20210330080856.14940-7-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-04-20 04:18:52 -04:00
Yanan Wang 6436430e29 KVM: selftests: Make a generic helper to get vm guest mode strings
For generality and conciseness, make an API which can be used in all
kvm libs and selftests to get vm guest mode strings. And the index i
is checked in the API in case of possiable faults.

Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20210330080856.14940-6-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-04-20 04:18:52 -04:00
Yanan Wang c412d6ac28 KVM: selftests: Print the errno besides error-string in TEST_ASSERT
Print the errno besides error-string in TEST_ASSERT in the format of
"errno=%d - %s" will explicitly indicate that the string is an error
information. Besides, the errno is easier to be used for debugging
than the error-string.

Suggested-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20210330080856.14940-5-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-04-20 04:18:52 -04:00
Yanan Wang fa76c775be tools/headers: sync headers of asm-generic/hugetlb_encode.h
This patch syncs contents of tools/include/asm-generic/hugetlb_encode.h
and include/uapi/asm-generic/hugetlb_encode.h. Arch powerpc supports 16KB
hugepages and ARM64 supports 32MB/512MB hugepages. The corresponding mmap
flags have already been added in include/uapi/asm-generic/hugetlb_encode.h,
but not tools/include/asm-generic/hugetlb_encode.h.

Cc: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210330080856.14940-2-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-04-20 04:18:51 -04:00
Dave Marchevsky c77cec5c20 bpf/selftests: Add bpf_get_task_stack retval bounds test_prog
Add a libbpf test prog which feeds bpf_get_task_stack's return value
into seq_write after confirming it's positive. No attempt to bound the
value from above is made.

Load will fail if verifier does not refine retval range based on buf sz
input to bpf_get_task_stack.

Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210416204704.2816874-4-davemarchevsky@fb.com
2021-04-19 18:23:33 -07:00
Dave Marchevsky bdc4e36945 bpf/selftests: Add bpf_get_task_stack retval bounds verifier test
Add a bpf_iter test which feeds bpf_get_task_stack's return value into
seq_write after confirming it's positive. No attempt to bound the value
from above is made.

Load will fail if verifier does not refine retval range based on
buf sz input to bpf_get_task_stack.

Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210416204704.2816874-3-davemarchevsky@fb.com
2021-04-19 18:23:33 -07:00
David S. Miller 6dd06ec7c1 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter updates for net-next:

1) Add vlan match and pop actions to the flowtable offload,
   patches from wenxu.

2) Reduce size of the netns_ct structure, which itself is
   embedded in struct net Make netns_ct a read-mostly structure.
   Patches from Florian Westphal.

3) Add FLOW_OFFLOAD_XMIT_UNSPEC to skip dst check from garbage
   collector path, as required by the tc CT action. From Roi Dayan.

4) VLAN offload fixes for nftables: Allow for matching on both s-vlan
   and c-vlan selectors. Fix match of VLAN id due to incorrect
   byteorder. Add a new routine to properly populate flow dissector
   ethertypes.

5) Missing keys in ip{6}_route_me_harder() results in incorrect
   routes. This includes an update for selftest infra. Patches
   from Ido Schimmel.

6) Add counter hardware offload support through FLOW_CLS_STATS.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19 15:49:50 -07:00
Florent Revest c2e39c6bdc selftests/bpf: Add a series of tests for bpf_snprintf
The "positive" part tests all format specifiers when things go well.

The "negative" part makes sure that incorrect format strings fail at
load time.

Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210419155243.1632274-7-revest@chromium.org
2021-04-19 15:27:37 -07:00
Florent Revest 58c2b1f5e0 libbpf: Introduce a BPF_SNPRINTF helper macro
Similarly to BPF_SEQ_PRINTF, this macro turns variadic arguments into an
array of u64, making it more natural to call the bpf_snprintf helper.

Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210419155243.1632274-6-revest@chromium.org
2021-04-19 15:27:37 -07:00
Florent Revest 83cd92b464 libbpf: Initialize the bpf_seq_printf parameters array field by field
When initializing the __param array with a one liner, if all args are
const, the initial array value will be placed in the rodata section but
because libbpf does not support relocation in the rodata section, any
pointer in this array will stay NULL.

Fixes: c09add2fbc ("tools/libbpf: Add bpf_iter support")
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210419155243.1632274-5-revest@chromium.org
2021-04-19 15:27:37 -07:00
Florent Revest 7b15523a98 bpf: Add a bpf_snprintf helper
The implementation takes inspiration from the existing bpf_trace_printk
helper but there are a few differences:

To allow for a large number of format-specifiers, parameters are
provided in an array, like in bpf_seq_printf.

Because the output string takes two arguments and the array of
parameters also takes two arguments, the format string needs to fit in
one argument. Thankfully, ARG_PTR_TO_CONST_STR is guaranteed to point to
a zero-terminated read-only map so we don't need a format string length
arg.

Because the format-string is known at verification time, we also do
a first pass of format string validation in the verifier logic. This
makes debugging easier.

Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210419155243.1632274-4-revest@chromium.org
2021-04-19 15:27:36 -07:00
Ido Schimmel bf5eb67dc8 selftests: fib_nexthops: Test large scale nexthop flushing
Test that all the nexthops are flushed when a multi-part nexthop dump is
required for the flushing.

Without previous patch:

 # ./fib_nexthops.sh
 TEST: Large scale nexthop flushing                                  [FAIL]

With previous patch:

 # ./fib_nexthops.sh
 TEST: Large scale nexthop flushing                                  [ OK ]

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19 15:20:34 -07:00
Josh Poimboeuf 99033461e6 objtool: Support asm jump tables
Objtool detection of asm jump tables would normally just work, except
for the fact that asm retpolines use alternatives.  Objtool thinks the
alternative code path (a jump to the retpoline) is a sibling call.

Don't treat alternative indirect branches as sibling calls when the
original instruction has a jump table.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://lore.kernel.org/r/460cf4dc675d64e1124146562cabd2c05aa322e8.1614182415.git.jpoimboe@redhat.com
2021-04-19 12:36:32 -05:00
Ido Schimmel 8826218215 selftests: fib_tests: Add test cases for interaction with mangling
Test that packets are correctly routed when netfilter mangling rules are
present.

Without previous patch:

 # ./fib_tests.sh -t ipv4_mangle

 IPv4 mangling tests
     TEST:     Connection with correct parameters                        [ OK ]
     TEST:     Connection with incorrect parameters                      [ OK ]
     TEST:     Connection with correct parameters - mangling             [FAIL]
     TEST:     Connection with correct parameters - no mangling          [ OK ]
     TEST:     Connection check - server side                            [FAIL]

 Tests passed:   3
 Tests failed:   2

 # ./fib_tests.sh -t ipv6_mangle

 IPv6 mangling tests
     TEST:     Connection with correct parameters                        [ OK ]
     TEST:     Connection with incorrect parameters                      [ OK ]
     TEST:     Connection with correct parameters - mangling             [FAIL]
     TEST:     Connection with correct parameters - no mangling          [ OK ]
     TEST:     Connection check - server side                            [FAIL]

 Tests passed:   3
 Tests failed:   2

With previous patch:

 # ./fib_tests.sh -t ipv4_mangle

 IPv4 mangling tests
     TEST:     Connection with correct parameters                        [ OK ]
     TEST:     Connection with incorrect parameters                      [ OK ]
     TEST:     Connection with correct parameters - mangling             [ OK ]
     TEST:     Connection with correct parameters - no mangling          [ OK ]
     TEST:     Connection check - server side                            [ OK ]

 Tests passed:   5
 Tests failed:   0

 # ./fib_tests.sh -t ipv6_mangle

 IPv6 mangling tests
     TEST:     Connection with correct parameters                        [ OK ]
     TEST:     Connection with incorrect parameters                      [ OK ]
     TEST:     Connection with correct parameters - mangling             [ OK ]
     TEST:     Connection with correct parameters - no mangling          [ OK ]
     TEST:     Connection check - server side                            [ OK ]

 Tests passed:   5
 Tests failed:   0

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-04-18 22:04:16 +02:00
Jakub Kicinski 8203c7ce4e Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
 - keep the ZC code, drop the code related to reinit
net/bridge/netfilter/ebtables.c
 - fix build after move to net_generic

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-17 11:08:07 -07:00
Linus Torvalds 88a5af9439 Networking fixes for 5.12-rc8, including fixes from netfilter,
and bpf. BPF verifier changes stand out, otherwise things have
 slowed down.
 
 Current release - regressions:
 
  - gro: ensure frag0 meets IP header alignment
 
  - Revert "net: stmmac: re-init rx buffers when mac resume back"
 
  - ethernet: macb: fix the restore of cmp registers
 
 Previous releases - regressions:
 
  - ixgbe: Fix NULL pointer dereference in ethtool loopback test
 
  - ixgbe: fix unbalanced device enable/disable in suspend/resume
 
  - phy: marvell: fix detection of PHY on Topaz switches
 
  - make tcp_allowed_congestion_control readonly in non-init netns
 
  - xen-netback: Check for hotplug-status existence before watching
 
 Previous releases - always broken:
 
  - bpf: mitigate a speculative oob read of up to map value size by
         tightening the masking window
 
  - sctp: fix race condition in sctp_destroy_sock
 
  - sit, ip6_tunnel: Unregister catch-all devices
 
  - netfilter: nftables: clone set element expression template
 
  - netfilter: flowtable: fix NAT IPv6 offload mangling
 
  - net: geneve: check skb is large enough for IPv4/IPv6 header
 
  - netlink: don't call ->netlink_bind with table lock held
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmB6aBQACgkQMUZtbf5S
 Iruu2BAAqHKdB5Qd1iBGaA1md8f+elErsotzjONz+eh2yqDKRaOW84+Fo9TPKgu6
 se0WmAY1HMUO3TEVdFeBsrgrs+bTY1E1OdfoZ39PFNkMdKMM80Ks1rn94nrPOohy
 q1uoNxe9jjT3nRQBTKHWdB3ZC3Jetwf3LP7G2b8SoA+gNd9xl+b1H/drmv7WdE/n
 pY7/GND7wd4qqidLRDgAaavaiGIdqym8V0bZEpz7cZtjT/U6RhjkBLKSB8JFGUxP
 PQ1NFrYKmLDM1zYTSObLOrKUmEaWzPPSsXmWqGkCE4qjJ8euX0e+5EbxF98JHdYW
 O+HMtdgr4UJGWAoxyGaxk7h9w0ydVyC1+Xgi6jAFWdXP7wgvXXQrldLnO44pX/6I
 dYlIM+Br/5VmnKiS1i1gBUURREBRSEy7ZYxtREjGC7dFSUn9RPm+0s0x/DCRBS9/
 MtNo0lCiuWsyaZ2v57aEKLX4YvGpilzg4UU3/45RNW6OnFzQubvjMBJPfap6EUAC
 Ii8uUc/vX0Jq4nZVZzDZ7vlkRcJTQgUqKrzgamUuwJmyPqzefkDcbSZub3tM8G39
 eetiHS1nqe3QwuP+TYM3MaBjw0bdgNz9Wt3xmY3Ehnf3pujMR5fbAsCbcdowV5/+
 OI2ZcTUZculeAW2q9DgsOCtyS/1huwMHG0zO32TgadbFv45UCS0=
 =LN+J
 -----END PGP SIGNATURE-----

Merge tag 'net-5.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Networking fixes for 5.12-rc8, including fixes from netfilter, and
  bpf. BPF verifier changes stand out, otherwise things have slowed
  down.

  Current release - regressions:

   - gro: ensure frag0 meets IP header alignment

   - Revert "net: stmmac: re-init rx buffers when mac resume back"

   - ethernet: macb: fix the restore of cmp registers

  Previous releases - regressions:

   - ixgbe: Fix NULL pointer dereference in ethtool loopback test

   - ixgbe: fix unbalanced device enable/disable in suspend/resume

   - phy: marvell: fix detection of PHY on Topaz switches

   - make tcp_allowed_congestion_control readonly in non-init netns

   - xen-netback: Check for hotplug-status existence before watching

  Previous releases - always broken:

   - bpf: mitigate a speculative oob read of up to map value size by
     tightening the masking window

   - sctp: fix race condition in sctp_destroy_sock

   - sit, ip6_tunnel: Unregister catch-all devices

   - netfilter: nftables: clone set element expression template

   - netfilter: flowtable: fix NAT IPv6 offload mangling

   - net: geneve: check skb is large enough for IPv4/IPv6 header

   - netlink: don't call ->netlink_bind with table lock held"

* tag 'net-5.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (52 commits)
  netlink: don't call ->netlink_bind with table lock held
  MAINTAINERS: update my email
  bpf: Update selftests to reflect new error states
  bpf: Tighten speculative pointer arithmetic mask
  bpf: Move sanitize_val_alu out of op switch
  bpf: Refactor and streamline bounds check into helper
  bpf: Improve verifier error messages for users
  bpf: Rework ptr_limit into alu_limit and add common error path
  bpf: Ensure off_reg has no mixed signed bounds for all types
  bpf: Move off_reg into sanitize_ptr_alu
  bpf: Use correct permission flag for mixed signed bounds arithmetic
  ch_ktls: do not send snd_una update to TCB in middle
  ch_ktls: tcb close causes tls connection failure
  ch_ktls: fix device connection close
  ch_ktls: Fix kernel panic
  i40e: fix the panic when running bpf in xdpdrv mode
  net/mlx5e: fix ingress_ifindex check in mlx5e_flower_parse_meta
  net/mlx5e: Fix setting of RS FEC mode
  net/mlx5: Fix setting of devlink traps in switchdev mode
  Revert "net: stmmac: re-init rx buffers when mac resume back"
  ...
2021-04-17 09:57:15 -07:00
Yang Yingliang b9c36fdedd KVM: selftests: remove redundant semi-colon
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Message-Id: <20210401142514.1688199-1-yangyingliang@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-04-17 08:31:01 -04:00
John Paul Adrian Glaubitz f4bf09dc3a ia64: tools: remove duplicate definition of ia64_mf() on ia64
The ia64_mf() macro defined in tools/arch/ia64/include/asm/barrier.h is
already defined in <asm/gcc_intrin.h> on ia64 which causes libbpf
failing to build:

    CC       /usr/src/linux/tools/bpf/bpftool//libbpf/staticobjs/libbpf.o
  In file included from /usr/src/linux/tools/include/asm/barrier.h:24,
                   from /usr/src/linux/tools/include/linux/ring_buffer.h:4,
                   from libbpf.c:37:
  /usr/src/linux/tools/include/asm/../../arch/ia64/include/asm/barrier.h:43: error: "ia64_mf" redefined [-Werror]
     43 | #define ia64_mf()       asm volatile ("mf" ::: "memory")
        |
  In file included from /usr/include/ia64-linux-gnu/asm/intrinsics.h:20,
                   from /usr/include/ia64-linux-gnu/asm/swab.h:11,
                   from /usr/include/linux/swab.h:8,
                   from /usr/include/linux/byteorder/little_endian.h:13,
                   from /usr/include/ia64-linux-gnu/asm/byteorder.h:5,
                   from /usr/src/linux/tools/include/uapi/linux/perf_event.h:20,
                   from libbpf.c:36:
  /usr/include/ia64-linux-gnu/asm/gcc_intrin.h:382: note: this is the location of the previous definition
    382 | #define ia64_mf() __asm__ volatile ("mf" ::: "memory")
        |
  cc1: all warnings being treated as errors

Thus, remove the definition from tools/arch/ia64/include/asm/barrier.h.

Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-16 16:10:37 -07:00
John Paul Adrian Glaubitz 17786fea41 ia64: tools: remove inclusion of ia64-specific version of errno.h header
There is no longer an ia64-specific version of the errno.h header below
arch/ia64/include/uapi/asm/, so trying to build tools/bpf fails with:

    CC       /usr/src/linux/tools/bpf/bpftool/btf_dumper.o
  In file included from /usr/src/linux/tools/include/linux/err.h:8,
                   from btf_dumper.c:11:
  /usr/src/linux/tools/include/uapi/asm/errno.h:13:10: fatal error: ../../../arch/ia64/include/uapi/asm/errno.h: No such file or directory
     13 | #include "../../../arch/ia64/include/uapi/asm/errno.h"
        |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  compilation terminated.

Thus, just remove the inclusion of the ia64-specific errno.h so that the
build will use the generic errno.h header on this target which was used
there anyway as the ia64-specific errno.h was just a wrapper for the
generic header.

Fixes: c25f867ddd ("ia64: remove unneeded uapi asm-generic wrappers")
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-16 16:10:37 -07:00
David S. Miller b022654296 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:

====================
pull-request: bpf 2021-04-17

The following pull-request contains BPF updates for your *net* tree.

We've added 10 non-merge commits during the last 9 day(s) which contain
a total of 8 files changed, 175 insertions(+), 111 deletions(-).

The main changes are:

1) Fix a potential NULL pointer dereference in libbpf's xsk
   umem handling, from Ciara Loftus.

2) Mitigate a speculative oob read of up to map value size by
   tightening the masking window, from Daniel Borkmann.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-16 15:48:08 -07:00
Florian Westphal dc65fe82fb selftests: mptcp: add packet mark test case
Extend mptcp_connect tool with SO_MARK support (-M <value>) and
add a test case that checks that the packet mark gets copied to all
subflows.

This is done by only allowing packets with either skb->mark 1 or 2
via iptables.

DROP rule packet counter is checked; if its not zero, print an error
message and fail the test case.

Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-16 15:23:10 -07:00
Daniel Borkmann d7a5091351 bpf: Update selftests to reflect new error states
Update various selftest error messages:

 * The 'Rx tried to sub from different maps, paths, or prohibited types'
   is reworked into more specific/differentiated error messages for better
   guidance.

 * The change into 'value -4294967168 makes map_value pointer be out of
   bounds' is due to moving the mixed bounds check into the speculation
   handling and thus occuring slightly later than above mentioned sanity
   check.

 * The change into 'math between map_value pointer and register with
   unbounded min value' is similarly due to register sanity check coming
   before the mixed bounds check.

 * The case of 'map access: known scalar += value_ptr from different maps'
   now loads fine given masks are the same from the different paths (despite
   max map value size being different).

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
2021-04-16 23:52:15 +02:00
Marco Elver 6216798bf9 selftests/perf_events: Add kselftest for remove_on_exec
Add kselftest to test that remove_on_exec removes inherited events from
child tasks.

Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210408103605.1676875-9-elver@google.com
2021-04-16 16:32:42 +02:00
Marco Elver f2c3c32f45 selftests/perf_events: Add kselftest for process-wide sigtrap handling
Add a kselftest for testing process-wide perf events with synchronous
SIGTRAP on events (using breakpoints). In particular, we want to test
that changes to the event propagate to all children, and the SIGTRAPs
are in fact synchronously sent to the thread where the event occurred.

Note: The "signal_stress" test case is also added later in the series to
perf tool's built-in tests. The test here is more elaborate in that
respect, which on one hand avoids bloating the perf tool unnecessarily,
but we also benefit from structured tests with TAP-compliant output that
the kselftest framework provides.

Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210408103605.1676875-8-elver@google.com
2021-04-16 16:32:42 +02:00
Alexander Shishkin 874fc35cdd perf intel-pt: Use aux_watermark
Turns out, the default setting of attr.aux_watermark to half of the total
buffer size is not very useful, especially with smaller buffers. The
problem is that, after half of the buffer is filled up, the kernel updates
->aux_head and sets up the next "transaction", while observing that
->aux_tail is still zero (as userspace haven't had the chance to update
it), meaning that the trace will have to stop at the end of this second
"transaction". This means, for example, that the second PERF_RECORD_AUX in
every trace comes with TRUNCATED flag set.

Setting attr.aux_watermark to quarter of the buffer gives enough space for
the ->aux_tail update to be observed and prevents the data loss.

The obligatory before/after showcase:

> # perf_before record -e intel_pt//u -m,8 uname
> Linux
> [ perf record: Woken up 6 times to write data ]
> Warning:
> AUX data lost 4 times out of 10!
>
> [ perf record: Captured and wrote 0.099 MB perf.data ]
> # perf record -e intel_pt//u -m,8 uname
> Linux
> [ perf record: Woken up 4 times to write data ]
> [ perf record: Captured and wrote 0.039 MB perf.data ]

The effect is still visible with large workloads and large buffers,
although less pronounced.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210414154955.49603-3-alexander.shishkin@linux.intel.com
2021-04-16 16:32:39 +02:00
Yonghong Song 8af5014276 bpftool: Fix a clang compilation warning
With clang compiler:
  make -j60 LLVM=1 LLVM_IAS=1  <=== compile kernel
  # build selftests/bpf or bpftool
  make -j60 -C tools/testing/selftests/bpf LLVM=1 LLVM_IAS=1
  make -j60 -C tools/bpf/bpftool LLVM=1 LLVM_IAS=1
the following compilation warning showed up,
  net.c:160:37: warning: comparison of integers of different signs: '__u32' (aka 'unsigned int') and 'int' [-Wsign-compare]
                for (nh = (struct nlmsghdr *)buf; NLMSG_OK(nh, len);
                                                  ^~~~~~~~~~~~~~~~~
  .../tools/include/uapi/linux/netlink.h:99:24: note: expanded from macro 'NLMSG_OK'
                           (nlh)->nlmsg_len <= (len))
                           ~~~~~~~~~~~~~~~~ ^   ~~~

In this particular case, "len" is defined as "int" and (nlh)->nlmsg_len is "unsigned int".
The macro NLMSG_OK is defined as below in uapi/linux/netlink.h.
  #define NLMSG_OK(nlh,len) ((len) >= (int)sizeof(struct nlmsghdr) && \
                             (nlh)->nlmsg_len >= sizeof(struct nlmsghdr) && \
                             (nlh)->nlmsg_len <= (len))

The clang compiler complains the comparision "(nlh)->nlmsg_len <= (len))",
but in bpftool/net.c, it is already ensured that "len > 0" must be true.
So theoretically the compiler could deduce that comparison of
"(nlh)->nlmsg_len" and "len" is okay, but this really depends on compiler
internals. Let us add an explicit type conversion (from "int" to "unsigned int")
for "len" in NLMSG_OK to silence this warning right now.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210413153435.3029635-1-yhs@fb.com
2021-04-15 16:50:22 -07:00
Yonghong Song ef9985893c selftests/bpf: Silence clang compilation warnings
With clang compiler:
  make -j60 LLVM=1 LLVM_IAS=1  <=== compile kernel
  make -j60 -C tools/testing/selftests/bpf LLVM=1 LLVM_IAS=1
Some linker flags are not used/effective for some binaries and
we have warnings like:
  warning: -lelf: 'linker' input unused [-Wunused-command-line-argument]

We also have warnings like:
  .../selftests/bpf/prog_tests/ns_current_pid_tgid.c:74:57: note: treat the string as an argument to avoid this
        if (CHECK(waitpid(cpid, &wstatus, 0) == -1, "waitpid", strerror(errno)))
                                                               ^
                                                               "%s",
  .../selftests/bpf/test_progs.h:129:35: note: expanded from macro 'CHECK'
        _CHECK(condition, tag, duration, format)
                                         ^
  .../selftests/bpf/test_progs.h:108:21: note: expanded from macro '_CHECK'
                fprintf(stdout, ##format);                              \
                                  ^
The first warning can be silenced with clang option -Wno-unused-command-line-argument.
For the second warning, source codes are modified as suggested by the compiler
to silence the warning. Since gcc does not support the option
-Wno-unused-command-line-argument and the warning only happens with clang
compiler, the option -Wno-unused-command-line-argument is enabled only when
clang compiler is used.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210413153429.3029377-1-yhs@fb.com
2021-04-15 16:50:22 -07:00
Yonghong Song a22c0c81da selftests/bpf: Fix test_cpp compilation failure with clang
With clang compiler:
  make -j60 LLVM=1 LLVM_IAS=1  <=== compile kernel
  make -j60 -C tools/testing/selftests/bpf LLVM=1 LLVM_IAS=1
the test_cpp build failed due to the failure:
  warning: treating 'c-header' input as 'c++-header' when in C++ mode, this behavior is deprecated [-Wdeprecated]
  clang-13: error: cannot specify -o when generating multiple output files

test_cpp compilation flag looks like:
  clang++ -g -Og -rdynamic -Wall -I<...> ... \
  -Dbpf_prog_load=bpf_prog_test_load -Dbpf_load_program=bpf_test_load_program \
  test_cpp.cpp <...>/test_core_extern.skel.h <...>/libbpf.a <...>/test_stub.o \
  -lcap -lelf -lz -lrt -lpthread -o <...>/test_cpp

The clang++ compiler complains the header file in the command line and
also failed the compilation due to this.
Let us remove the header file from the command line which is not intended
any way, and this fixed the compilation problem.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210413153424.3028986-1-yhs@fb.com
2021-04-15 16:50:22 -07:00
Yonghong Song f62700ce63 tools: Allow proper CC/CXX/... override with LLVM=1 in Makefile.include
selftests/bpf/Makefile includes tools/scripts/Makefile.include.
With the following command
  make -j60 LLVM=1 LLVM_IAS=1  <=== compile kernel
  make -j60 -C tools/testing/selftests/bpf LLVM=1 LLVM_IAS=1 V=1
some files are still compiled with gcc. This patch
fixed the case if CC/AR/LD/CXX/STRIP is allowed to be
overridden, it will be written to clang/llvm-ar/..., instead of
gcc binaries. The definition of CC_NO_CLANG is also relocated
to the place after the above CC is defined.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210413153419.3028165-1-yhs@fb.com
2021-04-15 16:50:21 -07:00
Yonghong Song 26e6dd1072 selftests: Set CC to clang in lib.mk if LLVM is set
selftests/bpf/Makefile includes lib.mk. With the following command
  make -j60 LLVM=1 LLVM_IAS=1  <=== compile kernel
  make -j60 -C tools/testing/selftests/bpf LLVM=1 LLVM_IAS=1 V=1
some files are still compiled with gcc. This patch
fixed lib.mk issue which sets CC to gcc in all cases.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210413153413.3027426-1-yhs@fb.com
2021-04-15 16:50:21 -07:00
Alexei Starovoitov d3d93e34bd libbpf: Remove unused field.
relo->processed is set, but not used. Remove it.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210415141817.53136-1-alexei.starovoitov@gmail.com
2021-04-15 15:34:16 -07:00
Rob Herring d3003d9e68 libperf tests: Add support for verbose printing
Add __T_VERBOSE() so tests can add verbose output. The verbose output is
enabled with the '-v' command line option. Running 'make tests V=1' will
enable the '-v' option when running the tests.

It'll be used in the next patch, for a user space counter access test.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Itaru Kitayama <itaru.kitayama@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: http://lore.kernel.org/lkml/20210414155412.3697605-3-robh@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-15 16:40:15 -03:00
Rob Herring 6cd70754f2 libperf: Add evsel mmap support
In order to support usersapce access, an event must be mmapped. While
there's already mmap support for evlist, the usecase is a bit different
than the self monitoring with userspace access. So let's add new
perf_evsel__mmap()/perf_evsel_munmap() functions to mmap/munmap an
evsel. This allows implementing userspace access as a fastpath for
perf_evsel__read().

The mmapped address is returned by perf_evsel__mmap_base() which
primarily for users/tests to check if userspace access is enabled.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Itaru Kitayama <itaru.kitayama@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: http://lore.kernel.org/lkml/20210414155412.3697605-2-robh@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-15 16:38:51 -03:00
Rob Herring 2fc83c2cd7 tools include: Add an initial math64.h
Add an initial math64.h similar to linux/math64.h with functions
mul_u64_u64_div64() and mul_u64_u32_shr(). This isn't a direct copy of
include/linux/math64.h as that doesn't define mul_u64_u64_div64().

Implementation was written by Peter Zilkstra based on linux/math64.h
and div64.h[1]. The original implementation was not optimal on arm64 as
__int128 division is not optimal with a call out to __udivti3, so I
dropped the __int128 variant of mul_u64_u64_div64().

[1] https://lore.kernel.org/lkml/20200322101848.GF2452@worktop.programming.kicks-ass.net/

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Itaru Kitayama <itaru.kitayama@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: http://lore.kernel.org/lkml/20210414155412.3697605-2-robh@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-15 16:38:02 -03:00
Vitaly Chikunov 2e1daee14e perf beauty: Fix fsconfig generator
After gnulib update sed stopped matching `[[:space:]]*+' as before,
causing the following compilation error:

  In file included from builtin-trace.c:719:
  trace/beauty/generated/fsconfig_arrays.c:2:3: error: expected expression before ']' token
      2 |  [] = "",
	|   ^
  trace/beauty/generated/fsconfig_arrays.c:2:3: error: array index in initializer not of integer type
  trace/beauty/generated/fsconfig_arrays.c:2:3: note: (near initialization for 'fsconfig_cmds')

Fix this by correcting the regular expression used in the generator.
Also, clean up the script by removing redundant egrep, xargs, and printf
invocations.

Committer testing:

Continues to work:

  $ cat tools/perf/trace/beauty/fsconfig.sh
  #!/bin/sh
  # SPDX-License-Identifier: LGPL-2.1

  if [ $# -ne 1 ] ; then
  	linux_header_dir=tools/include/uapi/linux
  else
  	linux_header_dir=$1
  fi

  linux_mount=${linux_header_dir}/mount.h

  printf "static const char *fsconfig_cmds[] = {\n"
  ms='[[:space:]]*'
  sed -nr "s/^${ms}FSCONFIG_([[:alnum:]_]+)${ms}=${ms}([[:digit:]]+)${ms},.*/\t[\2] = \"\1\",/p" \
  	${linux_mount}
  printf "};\n"
  $ tools/perf/trace/beauty/fsconfig.sh
  static const char *fsconfig_cmds[] = {
  	[0] = "SET_FLAG",
  	[1] = "SET_STRING",
  	[2] = "SET_BINARY",
  	[3] = "SET_PATH",
  	[4] = "SET_PATH_EMPTY",
  	[5] = "SET_FD",
  	[6] = "CMD_CREATE",
  	[7] = "CMD_RECONFIGURE",
  };
  $

Fixes: d35293004a ("perf beauty: Add generator for fsconfig's 'cmd' arg values")
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Co-authored-by: Dmitry V. Levin <ldv@altlinux.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lore.kernel.org/lkml/20210414182723.1670663-1-vt@altlinux.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-15 16:34:11 -03:00
Arnaldo Carvalho de Melo 3535a6967c perf record: Improve 'Workload failed' message printing events + what was exec'ed
Before:

  # perf record -a cycles,instructions,cache-misses
  Workload failed: No such file or directory
  #

After:

  # perf record -a cycles,instructions,cache-misses
  Failed to collect 'cycles' for the 'cycles,instructions,cache-misses' workload: No such file or directory
  #

Helps disambiguating other error scenarios:

  # perf record -a -e cycles,instructions,cache-misses bla
  Failed to collect 'cycles,instructions,cache-misses' for the 'bla' workload: No such file or directory
  # perf record -a cycles,instructions,cache-misses sleep 1
  Failed to collect 'cycles' for the 'cycles,instructions,cache-misses' workload: No such file or directory
  #

When all goes well we're back to the usual:

  # perf record -a -e cycles,instructions,cache-misses sleep 1
  [ perf record: Woken up 3 times to write data ]
  [ perf record: Captured and wrote 3.151 MB perf.data (21242 samples) ]
  #

Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20210414131628.2064862-3-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-15 16:34:05 -03:00
Arnaldo Carvalho de Melo 9865ea8ab3 perf evlist: Add a method to return the list of evsels as a string
Add a 'scnprintf' method to obtain the list of evsels in a evlist as a
string, excluding the "dummy" event used for things like receiving
metadata events (PERF_RECORD_FORK, MMAP, etc) when synthesizing
preexisting threads.

Will be used to improve the error message for workload failure in 'perf
record.

Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20210414131628.2064862-2-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-15 16:33:57 -03:00
zuoqilin 069904ce31 tools/testing: Remove unused variable
Remove unused variable "ret2".

Signed-off-by: zuoqilin <zuoqilin@yulong.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210414141639.1446-1-zuoqilin1@163.com
2021-04-14 17:28:58 -07:00
Florent Revest 1969b3c60d selftests/bpf: Fix the ASSERT_ERR_PTR macro
It is just missing a ';'. This macro is not used by any test yet.

Fixes: 22ba363516 ("selftests/bpf: Move and extend ASSERT_xxx() testing macros")
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210414155632.737866-1-revest@chromium.org
2021-04-14 17:24:22 -07:00
Greg Kroah-Hartman a00fcbc115 Linux 5.12-rc7
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmBzdS0eHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGDdAIAIpKH/tAHhH7s7QH
 m5ewgE8foP7M5Ue9fp3+JmbtaYSzhCAMcKhqGtat/zk5PvA9AoYCDXrTetfYtBHh
 LUOmhL9hcKItNobfkYBok6BiFjGUEL3HMqz5w+MUsMwnXIc4RXqfJmsQ932z9Kxf
 yDwe6ehIzJVrQLI/C0mTamYRHu2aiZ1VWzhKuT493rLeg0R2odCCIClPN+/QvCwb
 8/sk6l1c8eOUYYMUzKFZifaZGb12qDjRt4pZmk51aMTzg0WCpElJG+7Uqr4QQhZP
 p6xeNuUQq6WwxtlDkmo79Uzkrurb5tN2/hZ1RcJhs3EdHfpR0MjIyH3Znnb31gnu
 39VjHhg=
 =4KP/
 -----END PGP SIGNATURE-----

Merge tag 'v5.12-rc7' into driver-core-next

We need the driver core fix in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14 19:53:39 +02:00
Yang Jihong 5676dba708 perf annotate: Fix sample events lost in stdio mode
In hist__find_annotations(), since different 'struct hist_entry' entries
may point to same symbol, we free notes->src to signal already processed
this symbol in stdio mode; when annotate, entry will skipped if
notes->src is NULL to avoid repeated output.

However, there is a problem, for example, run the following command:

 # perf record -e branch-misses -e branch-instructions -a sleep 1

perf.data file contains different types of sample event.

If the same IP sample event exists in branch-misses and branch-instructions,
this event uses the same symbol. When annotate branch-misses events, notes->src
corresponding to this event is set to null, as a result, when annotate
branch-instructions events, this event is skipped and no annotate is output.

Solution of this patch is to remove zfree in hists__find_annotations and
change sort order to "dso,symbol" to avoid duplicate output when different
processes correspond to the same symbol.

Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: zhangjinhao2@huawei.com
Link: http://lore.kernel.org/lkml/20210319123527.173883-1-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-14 09:23:54 -03:00
Toke Høiland-Jørgensen 463c2149ed selftests/bpf: Add tests for target information in bpf_link info queries
Extend the fexit_bpf2bpf test to check that the info for the bpf_link
returned by the kernel matches the expected values.

While we're updating the test, change existing uses of CHEC() to use the
much easier to read ASSERT_*() macros.

v2:
- Convert last CHECK() call and get rid of 'duration' var
- Split ASSERT_OK_PTR() checks to two separate if statements

Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210413091607.58945-2-toke@redhat.com
2021-04-13 18:18:57 -07:00
Toke Høiland-Jørgensen 441e8c66b2 bpf: Return target info when a tracing bpf_link is queried
There is currently no way to discover the target of a tracing program
attachment after the fact. Add this information to bpf_link_info and return
it when querying the bpf_link fd.

Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210413091607.58945-1-toke@redhat.com
2021-04-13 18:18:57 -07:00
Arnaldo Carvalho de Melo 473b2922c7 Merge remote-tracking branch 'torvalds/master' into perf/core
To pick up fixes from perf/urgent that got into upstream.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-13 15:14:37 -03:00
Pedro Tammela 5c50732900 libbpf: Clarify flags in ringbuf helpers
In 'bpf_ringbuf_reserve()' we require the flag to '0' at the moment.

For 'bpf_ringbuf_{discard,submit,output}' a flag of '0' might send a
notification to the process if needed.

Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210412192434.944343-1-pctammela@mojatatu.com
2021-04-12 21:28:33 -07:00
Daniel Borkmann cbaa683bb3 bpf: Sync bpf headers in tooling infrastucture
Synchronize tools/include/uapi/linux/bpf.h which was missing changes
from various commits:

  - f3c45326ee ("bpf: Document PROG_TEST_RUN limitations")
  - e5e35e754c ("bpf: BPF-helper for MTU checking add length input")

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2021-04-12 17:31:09 +02:00
Greg Kroah-Hartman 14d34d2dbb Merge 5.12-rc7 into usb-next
We need the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-12 08:15:27 +02:00
Paolo Abeni 1c3cadbe02 self-tests: add veth tests
Add some basic veth tests, that verify the expected flags and
aggregation with different setups (default, xdp, etc...)

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-11 16:39:28 -07:00
Ingo Molnar c9450f728c Merge branch 'for-mingo-lkmm' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into locking/core
Pull LKMM changes from Paul E. McKenney: misc documentation updates.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-04-11 14:36:23 +02:00
Ingo Molnar 120b566d1d Merge branch 'for-mingo-rcu' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull RCU changes from Paul E. McKenney:

 - Bitmap support for "N" as alias for last bit

 - kvfree_rcu updates

 - mm_dump_obj() updates.  (One of these is to mm, but was suggested by Andrew Morton.)

 - RCU callback offloading update

 - Polling RCU grace-period interfaces

 - Realtime-related RCU updates

 - Tasks-RCU updates

 - Torture-test updates

 - Torture-test scripting updates

 - Miscellaneous fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-04-11 14:31:43 +02:00
Jakub Kicinski 8859a44ea0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Conflicts:

MAINTAINERS
 - keep Chandrasekar
drivers/net/ethernet/mellanox/mlx5/core/en_main.c
 - simple fix + trust the code re-added to param.c in -next is fine
include/linux/bpf.h
 - trivial
include/linux/ethtool.h
 - trivial, fix kdoc while at it
include/linux/skmsg.h
 - move to relevant place in tcp.c, comment re-wrapped
net/core/skmsg.c
 - add the sk = sk // sk = NULL around calls
net/tipc/crypto.c
 - trivial

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-09 20:48:35 -07:00
Linus Torvalds 9288e1f7d3 perf tools fixes for v5.12: 3rd batch
- Fix wrong LBR block sorting in 'perf report'.
 
 - Fix 'perf inject' repipe usage when consuming perf.data files.
 
 - Avoid potential buffer overrun when decoding ARM SPE hardware tracing
   packets, bug found using a fuzzer.
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYHCd+AAKCRCyPKLppCJ+
 J2FjAP9m+5RUppmssRK3CCEmcsvxhbtfpKnGMQJzRdR8A+fIKgEA+DN7UBqSUexW
 oTUqu51DkYwYMr/6FS3zea2ELoHI0wI=
 =xUDW
 -----END PGP SIGNATURE-----

Merge tag 'perf-tools-fixes-for-v5.12-2020-04-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tool fixes from Arnaldo Carvalho de Melo:

 - Fix wrong LBR block sorting in 'perf report'

 - Fix 'perf inject' repipe usage when consuming perf.data files

 - Avoid potential buffer overrun when decoding ARM SPE hardware tracing
   packets, bug found using a fuzzer

* tag 'perf-tools-fixes-for-v5.12-2020-04-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf arm-spe: Avoid potential buffer overrun
  perf report: Fix wrong LBR block sorting
  perf inject: Fix repipe usage
2021-04-09 17:12:31 -07:00
Linus Torvalds 4e04e7513b Networking fixes for 5.12-rc7, including fixes from can, ipsec,
mac80211, wireless, and bpf trees. No scary regressions here
 or in the works, but small fixes for 5.12 changes keep coming.
 
 Current release - regressions:
 
  - virtio: do not pull payload in skb->head
 
  - virtio: ensure mac header is set in virtio_net_hdr_to_skb()
 
  - Revert "net: correct sk_acceptq_is_full()"
 
  - mptcp: revert "mptcp: provide subflow aware release function"
 
  - ethernet: lan743x: fix ethernet frame cutoff issue
 
  - dsa: fix type was not set for devlink port
 
  - ethtool: remove link_mode param and derive link params
             from driver
 
  - sched: htb: fix null pointer dereference on a null new_q
 
  - wireless: iwlwifi: Fix softirq/hardirq disabling in
                       iwl_pcie_enqueue_hcmd()
 
  - wireless: iwlwifi: fw: fix notification wait locking
 
  - wireless: brcmfmac: p2p: Fix deadlock introduced by avoiding
                             the rtnl dependency
 
 Current release - new code bugs:
 
  - napi: fix hangup on napi_disable for threaded napi
 
  - bpf: take module reference for trampoline in module
 
  - wireless: mt76: mt7921: fix airtime reporting and related
                            tx hangs
 
  - wireless: iwlwifi: mvm: rfi: don't lock mvm->mutex when sending
                                 config command
 
 Previous releases - regressions:
 
  - rfkill: revert back to old userspace API by default
 
  - nfc: fix infinite loop, refcount & memory leaks in LLCP sockets
 
  - let skb_orphan_partial wake-up waiters
 
  - xfrm/compat: Cleanup WARN()s that can be user-triggered
 
  - vxlan, geneve: do not modify the shared tunnel info when PMTU
                   triggers an ICMP reply
 
  - can: fix msg_namelen values depending on CAN_REQUIRED_SIZE
 
  - can: uapi: mark union inside struct can_frame packed
 
  - sched: cls: fix action overwrite reference counting
 
  - sched: cls: fix err handler in tcf_action_init()
 
  - ethernet: mlxsw: fix ECN marking in tunnel decapsulation
 
  - ethernet: nfp: Fix a use after free in nfp_bpf_ctrl_msg_rx
 
  - ethernet: i40e: fix receiving of single packets in xsk zero-copy
                    mode
 
  - ethernet: cxgb4: avoid collecting SGE_QBASE regs during traffic
 
 Previous releases - always broken:
 
  - bpf: Refuse non-O_RDWR flags in BPF_OBJ_GET
 
  - bpf: Refcount task stack in bpf_get_task_stack
 
  - bpf, x86: Validate computation of branch displacements
 
  - ieee802154: fix many similar syzbot-found bugs
     - fix NULL dereferences in netlink attribute handling
     - reject unsupported operations on monitor interfaces
     - fix error handling in llsec_key_alloc()
 
  - xfrm: make ipv4 pmtu check honor ip header df
 
  - xfrm: make hash generation lock per network namespace
 
  - xfrm: esp: delete NETIF_F_SCTP_CRC bit from features for esp
               offload
 
  - ethtool: fix incorrect datatype in set_eee ops
 
  - xdp: fix xdp_return_frame() kernel BUG throw for page_pool
         memory model
 
  - openvswitch: fix send of uninitialized stack memory in ct limit
                 reply
 
 Misc:
 
  - udp: add get handling for UDP_GRO sockopt
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmBwyfAACgkQMUZtbf5S
 IruJ/BAAnjghw2kWXRCKK3Tkm0pi0zjaKvTS30AcKCW2+GnqSxTdiWNv+mxqFgnm
 YdduPKiGwLoDkA2i2d4EF8/HK6m+Q6bHcUbZ2npEm1ElkKfxCYGmocor8n2kD+a9
 je94VGYV7zytnxXw85V6/jFLDqOXXwhBfHhlDMVBZP8OyzUfbDKGorWmyGuy9GJp
 81bvzqN2bHUGIM0cDr+ol3eYw2ituGWgiqNfnq7z+/NVcYmD0EPChDRbp0jtH1ng
 dcoONI6YlymDEDpu/9GmyKL1ken9lcWoVdvv/aDGtP62x6SYDt5HKe3wAtJ+Kjbq
 jIPADxPx5BymYIZRBtdNR0rP66LycA7hDtM/C/h1WoihDXwpGeNUU4g0aJ+hsP5Q
 ldwJI1DJo79VbwM2c3Kg73PaphLcPD4RdwF0/ovFsl0+bTDfj8i93ah4Wnzj0Qli
 EMiSDEDNb51e9nkW+xu+FjLWmxHJvLOL/+VgHV5bPJJBob2fqnjAMj2PkPEuEtXY
 TPWEh9y3zaEyp/9tNx0cstGOt6Gf5DQ5Nk6tX6hMpJT/BeL8mju1jm0yPLZhMJjF
 LlTrJgXftfP/cjltdSm4aVqSU5okjHNYDhmHlNgvzih5mt+NVslRJfzwq62Vudqy
 C0kpmVdQNFkOB0UcqQihevZg9mvem3m/dYl+v/MV7Uq6r4s4M2A=
 =SHL0
 -----END PGP SIGNATURE-----

Merge tag 'net-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Networking fixes for 5.12-rc7, including fixes from can, ipsec,
  mac80211, wireless, and bpf trees.

  No scary regressions here or in the works, but small fixes for 5.12
  changes keep coming.

  Current release - regressions:

   - virtio: do not pull payload in skb->head

   - virtio: ensure mac header is set in virtio_net_hdr_to_skb()

   - Revert "net: correct sk_acceptq_is_full()"

   - mptcp: revert "mptcp: provide subflow aware release function"

   - ethernet: lan743x: fix ethernet frame cutoff issue

   - dsa: fix type was not set for devlink port

   - ethtool: remove link_mode param and derive link params from driver

   - sched: htb: fix null pointer dereference on a null new_q

   - wireless: iwlwifi: Fix softirq/hardirq disabling in
     iwl_pcie_enqueue_hcmd()

   - wireless: iwlwifi: fw: fix notification wait locking

   - wireless: brcmfmac: p2p: Fix deadlock introduced by avoiding the
     rtnl dependency

  Current release - new code bugs:

   - napi: fix hangup on napi_disable for threaded napi

   - bpf: take module reference for trampoline in module

   - wireless: mt76: mt7921: fix airtime reporting and related tx hangs

   - wireless: iwlwifi: mvm: rfi: don't lock mvm->mutex when sending
     config command

  Previous releases - regressions:

   - rfkill: revert back to old userspace API by default

   - nfc: fix infinite loop, refcount & memory leaks in LLCP sockets

   - let skb_orphan_partial wake-up waiters

   - xfrm/compat: Cleanup WARN()s that can be user-triggered

   - vxlan, geneve: do not modify the shared tunnel info when PMTU
     triggers an ICMP reply

   - can: fix msg_namelen values depending on CAN_REQUIRED_SIZE

   - can: uapi: mark union inside struct can_frame packed

   - sched: cls: fix action overwrite reference counting

   - sched: cls: fix err handler in tcf_action_init()

   - ethernet: mlxsw: fix ECN marking in tunnel decapsulation

   - ethernet: nfp: Fix a use after free in nfp_bpf_ctrl_msg_rx

   - ethernet: i40e: fix receiving of single packets in xsk zero-copy
     mode

   - ethernet: cxgb4: avoid collecting SGE_QBASE regs during traffic

  Previous releases - always broken:

   - bpf: Refuse non-O_RDWR flags in BPF_OBJ_GET

   - bpf: Refcount task stack in bpf_get_task_stack

   - bpf, x86: Validate computation of branch displacements

   - ieee802154: fix many similar syzbot-found bugs
       - fix NULL dereferences in netlink attribute handling
       - reject unsupported operations on monitor interfaces
       - fix error handling in llsec_key_alloc()

   - xfrm: make ipv4 pmtu check honor ip header df

   - xfrm: make hash generation lock per network namespace

   - xfrm: esp: delete NETIF_F_SCTP_CRC bit from features for esp
     offload

   - ethtool: fix incorrect datatype in set_eee ops

   - xdp: fix xdp_return_frame() kernel BUG throw for page_pool memory
     model

   - openvswitch: fix send of uninitialized stack memory in ct limit
     reply

  Misc:

   - udp: add get handling for UDP_GRO sockopt"

* tag 'net-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (182 commits)
  net: fix hangup on napi_disable for threaded napi
  net: hns3: Trivial spell fix in hns3 driver
  lan743x: fix ethernet frame cutoff issue
  net: ipv6: check for validity before dereferencing cfg->fc_nlinfo.nlh
  net: dsa: lantiq_gswip: Configure all remaining GSWIP_MII_CFG bits
  net: dsa: lantiq_gswip: Don't use PHY auto polling
  net: sched: sch_teql: fix null-pointer dereference
  ipv6: report errors for iftoken via netlink extack
  net: sched: fix err handler in tcf_action_init()
  net: sched: fix action overwrite reference counting
  Revert "net: sched: bump refcount for new action in ACT replace mode"
  ice: fix memory leak of aRFS after resuming from suspend
  i40e: Fix sparse warning: missing error code 'err'
  i40e: Fix sparse error: 'vsi->netdev' could be null
  i40e: Fix sparse error: uninitialized symbol 'ring'
  i40e: Fix sparse errors in i40e_txrx.c
  i40e: Fix parameters in aq_get_phy_register()
  nl80211: fix beacon head validation
  bpf, x86: Validate computation of branch displacements for x86-32
  bpf, x86: Validate computation of branch displacements for x86-64
  ...
2021-04-09 15:26:51 -07:00
Yauheni Kaliuta cfc0889ceb selftests/bpf: ringbuf_multi: Test bpf_map__set_inner_map_fd
Test map__set_inner_map_fd() interaction with map-in-map
initialization. Use hashmap of maps just to make it different to
existing array of maps.

Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210408061310.95877-9-yauheni.kaliuta@redhat.com
2021-04-08 23:54:48 -07:00
Yauheni Kaliuta f3f4c23e12 selftests/bpf: ringbuf_multi: Use runtime page size
Set bpf table sizes dynamically according to the runtime page size
value.

Do not switch to ASSERT macros, keep CHECK, for consistency with the
rest of the test. Can be a separate cleanup patch.

Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210408061310.95877-8-yauheni.kaliuta@redhat.com
2021-04-08 23:54:48 -07:00
Andrii Nakryiko b3278099b2 libbpf: Add bpf_map__inner_map API
The API gives access to inner map for map in map types (array or
hash of map). It will be used to dynamically set max_entries in it.

Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210408061310.95877-7-yauheni.kaliuta@redhat.com
2021-04-08 23:54:48 -07:00
Yauheni Kaliuta 23a6576606 selftests/bpf: ringbuf: Use runtime page size
Replace hardcoded 4096 with runtime value in the userspace part of
the test and set bpf table sizes dynamically according to the value.

Do not switch to ASSERT macros, keep CHECK, for consistency with the
rest of the test. Can be a separate cleanup patch.

Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210408061310.95877-6-yauheni.kaliuta@redhat.com
2021-04-08 23:54:48 -07:00
Yauheni Kaliuta 34090aaf25 selftests/bpf: mmap: Use runtime page size
Replace hardcoded 4096 with runtime value in the userspace part of
the test and set bpf table sizes dynamically according to the value.

Do not switch to ASSERT macros, keep CHECK, for consistency with the
rest of the test. Can be a separate cleanup patch.

Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210408061310.95877-5-yauheni.kaliuta@redhat.com
2021-04-08 23:54:48 -07:00
Yauheni Kaliuta 7a85e4dfa7 selftests/bpf: Pass page size from userspace in map_ptr
Use ASSERT to check result but keep CHECK where format was used to
report error.

Use bpf_map__set_max_entries() to set map size dynamically from
userspace according to page size.

Zero-initialize the variable in bpf prog, otherwise it will cause
problems on some versions of Clang.

Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210408061310.95877-4-yauheni.kaliuta@redhat.com
2021-04-08 23:54:47 -07:00
Yauheni Kaliuta 361d32028c selftests/bpf: Pass page size from userspace in sockopt_sk
Since there is no convenient way for bpf program to get PAGE_SIZE
from inside of the kernel, pass the value from userspace.

Zero-initialize the variable in bpf prog, otherwise it will cause
problems on some versions of Clang.

Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210408061310.95877-3-yauheni.kaliuta@redhat.com
2021-04-08 23:54:47 -07:00
Yauheni Kaliuta cad99cce13 selftests/bpf: test_progs/sockopt_sk: Convert to use BPF skeleton
Switch the test to use BPF skeleton to save some boilerplate and
make it easy to access bpf program bss segment.

The latter will be used to pass PAGE_SIZE from userspace since there
is no convenient way for bpf program to get it from inside of the
kernel.

Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210408061310.95877-2-yauheni.kaliuta@redhat.com
2021-04-08 23:54:47 -07:00
Yauheni Kaliuta ff182bc572 selftests/bpf: test_progs/sockopt_sk: Remove version
As pointed by Andrii Nakryiko, _version is useless now, remove it.

Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210408061310.95877-1-yauheni.kaliuta@redhat.com
2021-04-08 23:54:47 -07:00
Ciara Loftus afd0be7299 libbpf: Fix potential NULL pointer dereference
Wait until after the UMEM is checked for null to dereference it.

Fixes: 43f1bc1eff ("libbpf: Restore umem state after socket create failure")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210408052009.7844-1-ciara.loftus@intel.com
2021-04-08 23:36:46 +02:00
Vlad Buslov 652e3124c3 tc-testing: add simple action test to verify batch change cleanup
Verify cleanup of failed actions batch change where second action in batch
fails after successful init of first action.

Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08 13:50:14 -07:00
Vlad Buslov 79749ae19d tc-testing: add simple action test to verify batch add cleanup
Verify cleanup of failed actions batch add where second action in batch
fails after successful init of first action.

Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08 13:50:14 -07:00
Masanari Iida 84de8154c5 tools: Fix a typo in kernel-chktaint
This patch fixes a spelling typo in kernel-chktaint

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20210402070514.336376-1-standby24x7@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-04-08 11:41:22 -06:00
Smita Koralahalli da66658638 perf vendor events amd: Add Zen3 events
Add PMU events for AMD Zen3 processors as documented in the AMD Processor
Programming Reference for Family 19h and Model 01h [1].

Below are the events which are new on Zen3:

  PMCx041 ls_mab_alloc.{all_allocations|hardware_prefetcher_allocations|load_store_allocations}
  PMCx043 ls_dmnd_fills_from_sys.ext_cache_local
  PMCx044 ls_any_fills_from_sys.{mem_io_remote|ext_cache_remote|mem_io_local|ext_cache_local|int_cache|lcl_l2}
  PMCx047 ls_misal_loads.{ma4k|ma64}
  PMCx059 ls_sw_pf_dc_fills.ext_cache_local
  PMCx05a ls_hw_pf_dc_fills.ext_cache_local
  PMCx05f ls_alloc_mab_count
  PMCx085 bp_l1_tlb_miss_l2_tlb_miss.coalesced_4k
  PMCx0ab de_dis_cops_from_decoder.disp_op_type.{any_integer_dispatch|any_fp_dispatch}
  PMCx0cc ex_ret_ind_brch_instr
  PMCx18e ic_tag_hit_miss.{all_instruction_cache_accesses|instruction_cache_miss|instruction_cache_hit}
  PMCx1c7 ex_ret_msprd_brnch_instr_dir_msmtch
  PMCx28f op_cache_hit_miss.{all_op_cache_accesses|op_cache_miss|op_cache_hit}

Section 2.1.17.2 "Performance Measurement" of "PPR for AMD Family 19h,
Model 01h, Revision B1 Processors - 55898 Rev 0.35 - Feb 5, 2021." lists
new metrics. Add them.

Preserve the events for Zen3 if they are measurable and non-zero as taken
from Zen2 directory even if the PPR of Zen3 [1] omits them. Those events
are the following:

  PMCx000 fpu_pipe_assignment.{total|total0|total1|total2|total3}
  PMCx004 fp_num_mov_elim_scal_op.{optimized|opt_potential|sse_mov_ops_elim|sse_mov_ops}
  PMCx02D ls_rdtsc
  PMCx040 ls_dc_accesses
  PMCx046 ls_tablewalker.{iside|ic_type1|ic_type0|dside|dc_type1|dc_type0}
  PMCx061 l2_request_g2.{group1|ls_rd_sized|ls_rd_sized_nc|ic_rd_sized|ic_rd_sized_nc|smc_inval|bus_lock_originator|bus_locks_responses}
  PMCx062 l2_latency.l2_cycles_waiting_on_fills
  PMCx063 l2_wcb_req.{wcb_write|wcb_close|zero_byte_store|cl_zero}
  PMCx06d l2_fill_pending.l2_fill_busy
  PMCx080 ic_fw32
  PMCx081 ic_fw32_miss
  PMCx086 bp_snp_re_sync
  PMCx087 ic_fetch_stall.{ic_stall_any|ic_stall_dq_empty|ic_stall_back_pressure}
  PMCx08a bp_l1_btb_correct
  PMCx08c ic_cache_inval.{l2_invalidating_probe|fill_invalidated}
  PMCx099 bp_tlb_rel
  PMCx0a9 de_dis_uop_queue_empty_di0
  PMCx0c7 ex_ret_brn_resync
  PMCx28a ic_oc_mode_switch.{oc_ic_mode_switch|ic_oc_mode_switch}
  L3PMCx01 l3_request_g1.caching_l3_cache_accesses
  L3PMCx06 l3_comb_clstr_state.{other_l3_miss_typs|request_miss}

[1] Processor Programming Reference (PPR) for AMD Family 19h, Model 01h,
Revision B1 Processors - 55898 Rev 0.35 - Feb 5, 2021.

[2] Processor Programming Reference (PPR) for AMD Family 17h Model 71h,
Revision B0 Processors, 56176 Rev 3.06 - Jul 17, 2019.

[3] Processor Programming Reference (PPR) for AMD Family 17h Models
01h,08h, Revision B2 Processors, 54945 Rev 3.03 - Jun 14, 2019.

All of the PPRs can be found at:

https://bugzilla.kernel.org/show_bug.cgi?id=206537

Reviewed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vijay Thakkar <vijaythakkar@me.com>
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20210406215944.113332-5-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-08 14:24:39 -03:00
Smita Koralahalli e5f2b4e1b8 perf vendor events amd: Use 0x%02x format for event code and umask
Use 0x%02x format for all event codes and umasks as this helps in tracking
changes of automatically generated event tables.

Reviewed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vijay Thakkar <vijaythakkar@me.com>
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20210406215944.113332-4-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-08 14:24:38 -03:00
Smita Koralahalli ff64c98195 perf vendor events amd: Use lowercases for all the eventcodes and umasks
The values of event codes and umasks are inconsistent with letter cases.
Enforce a unique style and default everything to lower case as this
helps in tracking changes of automatically generated event tables.

Reviewed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vijay Thakkar <vijaythakkar@me.com>
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20210406215944.113332-3-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-08 14:24:38 -03:00
Smita Koralahalli 86c2bc3da7 perf vendor events amd: Fix broken L2 Cache Hits from L2 HWPF metric
Commit 08ed77e414 ("perf vendor events amd: Add recommended events")
added the hits event "L2 Cache Hits from L2 HWPF" with the same metric
expression as the accesses event "L2 Cache Accesses from L2 HWPF":

$ perf list --details
...
  l2_cache_accesses_from_l2_hwpf
     [L2 Cache Accesses from L2 HWPF]
     [l2_pf_hit_l2 + l2_pf_miss_l2_hit_l3 + l2_pf_miss_l2_l3]
  l2_cache_hits_from_l2_hwpf
     [L2 Cache Hits from L2 HWPF]
     [l2_pf_hit_l2 + l2_pf_miss_l2_hit_l3 + l2_pf_miss_l2_l3]
...

This was wrong and led to counting hits the same as accesses. Section
2.1.15.2 "Performance Measurement" of "PPR for AMD Family 17h Model 31h
B0 - 55803 Rev 0.54 - Sep 12, 2019", documents the hits event with
EventCode 0x70 which is the same as l2_pf_hit_l2.

Fix this, and massage the description for l2_pf_hit_l2 as the hits event
is now the duplicate of l2_pf_hit_l2. AMD recommends using the recommended
event over other events if the duplicate exists and maintain both for
consistency. Hence, l2_cache_hits_from_l2_hwpf should override
l2_pf_hit_l2.

Before:

 # perf stat -M l2_cache_accesses_from_l2_hwpf,l2_cache_hits_from_l2_hwpf sleep 1

 Performance counter stats for 'sleep 1':

             1,436      l2_pf_miss_l2_l3          # 11114.00 l2_cache_accesses_from_l2_hwpf
                                                  # 11114.00 l2_cache_hits_from_l2_hwpf
             4,482      l2_pf_hit_l2
             5,196      l2_pf_miss_l2_hit_l3

       1.001765339 seconds time elapsed

After:

 # perf stat -M l2_cache_accesses_from_l2_hwpf sleep 1

 Performance counter stats for 'sleep 1':

             1,477      l2_pf_miss_l2_l3          # 10442.00 l2_cache_accesses_from_l2_hwpf
             3,978      l2_pf_hit_l2
             4,987      l2_pf_miss_l2_hit_l3

       1.001491186 seconds time elapsed

 # perf stat -e l2_cache_hits_from_l2_hwpf sleep 1

 Performance counter stats for 'sleep 1':

             3,983      l2_cache_hits_from_l2_hwpf

       1.001329970 seconds time elapsed

Note the difference in performance counter values for the accesses
versus the hits after the fix, and the hits event now counting the same
as l2_pf_hit_l2.

Fixes: 08ed77e414 ("perf vendor events amd: Add recommended events")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Reviewed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org> # On a 3900X
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vijay Thakkar <vijaythakkar@me.com>
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20210406215944.113332-2-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-08 14:24:38 -03:00
John Garry 0cc177cfc9 perf vendor events arm64: Add Hisi hip08 L3 metrics
Add L3 metrics.

Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1617791570-165223-7-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-08 14:24:31 -03:00
John Garry 0383717348 perf vendor events arm64: Add Hisi hip08 L2 metrics
Add L2 metrics.

Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1617791570-165223-6-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-08 14:24:25 -03:00
John Garry c4e1dc4a94 perf vendor events arm64: Add Hisi hip08 L1 metrics
Add L1 metrics. Formula is as consistent as possible with MAN pages
description for these metrics.

Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1617791570-165223-5-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-08 14:24:19 -03:00
John Garry e126bef55f perf pmu: Add pmu_events_map__find() function to find the common PMU map for the system
Add a function to find the common PMU map for the system.

For arm64, a special variant is added. This is because arm64 supports
heterogeneous CPU systems. As such, it cannot be guaranteed that the
cpumap is same for all CPUs. So in case of heterogeneous systems, don't
return a cpumap.

Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Paul A. Clarke <pc@us.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1617791570-165223-4-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-08 14:24:14 -03:00
John Garry a48a995edc perf test: Handle metric reuse in pmu-events parsing test
The pmu-events parsing test does not handle metric reuse at all.

Introduce some simple handling to resolve metrics who reference other
metrics.

Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Paul A. Clarke <pc@us.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: linuxarm@huawei.com
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/1617791570-165223-3-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-08 14:24:00 -03:00
John Garry dedb76d359 perf metricgroup: Make find_metric() public with name change
Function find_metric() is required for the metric processing in the
pmu-events testcase, so make it public. Also change the name to include
"metricgroup".

Tested-by: Paul A. Clarke <pc@us.ibm.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: linuxarm@huawei.com
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/1617791570-165223-2-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-08 14:23:39 -03:00
Kees Cook 68ef8735d2 lkdtm: Add REPORT_STACK for checking stack offsets
For validating the stack offset behavior, report the offset from a given
process's first seen stack address. Add s script to calculate the results
to the LKDTM kselftests.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210401232347.2791257-7-keescook@chromium.org
2021-04-08 14:05:20 +02:00
Jordan Niethe 812aa68ef7 selftests/powerpc: Suggest memtrace instead of /dev/mem for ci memory
The suggested alternative for getting cache-inhibited memory with 'mem='
and /dev/mem is pretty hacky. Also, PAPR guests do not allow system
memory to be mapped cache-inhibited so despite /dev/mem being available
this will not work which can cause confusion.  Instead recommend using
the memtrace buffers. memtrace is only available on powernv so there
will not be any chance of trying to do this in a guest.

Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210225032108.1458352-2-jniethe5@gmail.com
2021-04-08 21:17:44 +10:00
Jordan Niethe 29e3ea8cbd selftests/powerpc: Test for spurious kernel memory faults on radix
Previously when mapping kernel memory on radix, no ptesync was
included which would periodically lead to unhandled spurious faults.
Mapping kernel memory is used when code patching with Strict RWX
enabled. As suggested by Chris Riedl, turning ftrace on and off does a
large amount of code patching so is a convenient way to see this kind
of fault.

Add a selftest to try and trigger this kind of a spurious fault. It
tests for 30 seconds which is usually long enough for the issue to
show up.

Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
[mpe: Rename it to better reflect what it does, rather than the symptom]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210208032957.1232102-2-jniethe5@gmail.com
2021-04-08 21:17:42 +10:00
Fenghua Yu e75074781f selftests/resctrl: Change a few printed messages
Change a few printed messages to report test progress more clearly.

Add a missing "\n" at the end of one printed message.

Suggested-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-04-07 16:37:49 -06:00
Geliang Tang c3eaa5f667 selftests: mptcp: add the net device name testcase
This patch added a new testcase for setting the net device name. In it,
pass the net device name to pm_nl_ctl to set the ifindex field of struct
mptcp_pm_addr_entry.

Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07 14:09:40 -07:00
Ian Rogers 92f1e8adf7 perf arm-spe: Avoid potential buffer overrun
SPE extended headers are > 1 byte so ensure the buffer contains at least
this before reading. This issue was detected by fuzzing.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Dave Martin <dave.martin@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Link: http://lore.kernel.org/lkml/20210407153955.317215-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-07 16:23:20 -03:00
Jin Yao f2013278ae perf report: Fix wrong LBR block sorting
When '--total-cycles' is specified, it supports sorting for all blocks
by 'Sampled Cycles%'. This is useful to concentrate on the globally
hottest blocks.

'Sampled Cycles%' - block sampled cycles aggregation / total sampled cycles

But in current code, it doesn't use the cycles aggregation. Part of
'cycles' counting is possibly dropped for some overlap jumps. But for
identifying the hot block, we always need the full cycles.

  # perf record -b ./triad_loop
  # perf report --total-cycles --stdio

Before:

  #
  # Sampled Cycles%  Sampled Cycles  Avg Cycles%  Avg Cycles                                          [Program Block Range]      Shared Object
  # ...............  ..............  ...........  ..........  .............................................................  .................
  #
              0.81%             793        4.32%         793                           [setup-vdso.h:34 -> setup-vdso.h:40]         ld-2.27.so
              0.49%             480        0.87%         160                    [native_write_msr+0 -> native_write_msr+16]  [kernel.kallsyms]
              0.48%             476        0.52%          95                      [native_read_msr+0 -> native_read_msr+29]  [kernel.kallsyms]
              0.31%             303        1.65%         303                              [nmi_restore+0 -> nmi_restore+37]  [kernel.kallsyms]
              0.26%             255        1.39%         255      [nohz_balance_exit_idle+75 -> nohz_balance_exit_idle+162]  [kernel.kallsyms]
              0.24%             234        1.28%         234                       [end_repeat_nmi+67 -> end_repeat_nmi+83]  [kernel.kallsyms]
              0.23%             227        1.24%         227            [__irqentry_text_end+96 -> __irqentry_text_end+126]  [kernel.kallsyms]
              0.20%             194        1.06%         194             [native_set_debugreg+52 -> native_set_debugreg+56]  [kernel.kallsyms]
              0.11%             106        0.14%          26                [native_sched_clock+0 -> native_sched_clock+98]  [kernel.kallsyms]
              0.10%              97        0.53%          97            [trigger_load_balance+0 -> trigger_load_balance+67]  [kernel.kallsyms]
              0.09%              85        0.46%          85             [get-dynamic-info.h:102 -> get-dynamic-info.h:111]         ld-2.27.so
  ...
              0.00%           92.7K        0.02%           4                           [triad_loop.c:64 -> triad_loop.c:65]         triad_loop

The hottest block '[triad_loop.c:64 -> triad_loop.c:65]' is not at
the top of output.

After:

  # Sampled Cycles%  Sampled Cycles  Avg Cycles%  Avg Cycles                                           [Program Block Range]      Shared Object
  # ...............  ..............  ...........  ..........  ..............................................................  .................
  #
             94.35%           92.7K        0.02%           4                            [triad_loop.c:64 -> triad_loop.c:65]         triad_loop
              0.81%             793        4.32%         793                            [setup-vdso.h:34 -> setup-vdso.h:40]         ld-2.27.so
              0.49%             480        0.87%         160                     [native_write_msr+0 -> native_write_msr+16]  [kernel.kallsyms]
              0.48%             476        0.52%          95                       [native_read_msr+0 -> native_read_msr+29]  [kernel.kallsyms]
              0.31%             303        1.65%         303                               [nmi_restore+0 -> nmi_restore+37]  [kernel.kallsyms]
              0.26%             255        1.39%         255       [nohz_balance_exit_idle+75 -> nohz_balance_exit_idle+162]  [kernel.kallsyms]
              0.24%             234        1.28%         234                        [end_repeat_nmi+67 -> end_repeat_nmi+83]  [kernel.kallsyms]
              0.23%             227        1.24%         227             [__irqentry_text_end+96 -> __irqentry_text_end+126]  [kernel.kallsyms]
              0.20%             194        1.06%         194              [native_set_debugreg+52 -> native_set_debugreg+56]  [kernel.kallsyms]
              0.11%             106        0.14%          26                 [native_sched_clock+0 -> native_sched_clock+98]  [kernel.kallsyms]
              0.10%              97        0.53%          97             [trigger_load_balance+0 -> trigger_load_balance+67]  [kernel.kallsyms]
              0.09%              85        0.46%          85              [get-dynamic-info.h:102 -> get-dynamic-info.h:111]         ld-2.27.so
              0.08%              82        0.06%          11  [intel_pmu_drain_pebs_nhm+580 -> intel_pmu_drain_pebs_nhm+627]  [kernel.kallsyms]
              0.08%              77        0.42%          77                  [lru_add_drain_cpu+0 -> lru_add_drain_cpu+133]  [kernel.kallsyms]
              0.08%              74        0.10%          18                [handle_pmi_common+271 -> handle_pmi_common+310]  [kernel.kallsyms]
              0.08%              74        0.40%          74              [get-dynamic-info.h:131 -> get-dynamic-info.h:157]         ld-2.27.so
              0.07%              69        0.09%          17  [intel_pmu_drain_pebs_nhm+432 -> intel_pmu_drain_pebs_nhm+468]  [kernel.kallsyms]

Now the hottest block is reported at the top of output.

Fixes: b65a7d372b ("perf hist: Support block formats with compare/sort/display")
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210407024452.29988-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-07 16:18:49 -03:00
Srinivas Pandruvada 61ce18ff01 tools/power/x86/intel-speed-select: v1.9 release
This release adds following changes:
- Support increased number of CPUs
- Return error when mailbox commmand fails to enable core-power
- Option to online all CPUs
- Removes build date and time print

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-04-07 19:47:22 +02:00
Antonio Terceiro 17de9a5654 tools/power/x86/intel-speed-select: Drop __DATE__ and __TIME__ macros
These macros introduce nondeterminism in builds, and break reproducible
builds.

Signed-off-by: Antonio Terceiro <antonio.terceiro@linaro.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-04-07 19:47:22 +02:00
Srinivas Pandruvada 0d3dfd7570 tools/power/x86/intel-speed-select: Add options to force online
It is possible that users manually offlined CPUs via sysfs interface
and then started this utility. In this case we will not be able to get
package and die id of the those CPUs. So add an option to force online
if required for some commands.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-04-07 19:47:22 +02:00
Srinivas Pandruvada b84733a1c5 tools/power/x86/intel-speed-select: Process mailbox read error for core-power
Some older kernels don't support reading core-power status. In that case
mailbox command fails. So, display core-power status as "unknown" instead
of supported.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-04-07 19:47:22 +02:00
Srinivas Pandruvada 2e70b710f3 tools/power/x86/intel-speed-select: Increase string size
The current string size to print cpulist can accommodate upto 80
logical CPUs per package. But this limit is not enough. So increase
the string size. Also prevent buffer overflow, if the string size
reaches limit.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-04-07 19:47:22 +02:00
Colin Ian King e527db8f39 ACPICA: Tree-wide: fix various typos and spelling mistakes
This commit squashes the following:
ACPICA commit bc8939e2d902653e71bb1601b129a993c37fcfad
ACPICA commit 2d9e5e98e23f2a569e5691e6bed183146e25798d
ACPICA commit 937358156631ea7a0eef3569c213c82a031097d5

Fix more spelling issues found using the codespell checker and found
without tools.

Link: https://github.com/acpica/acpica/commit/bc8939e2
Link: https://github.com/acpica/acpica/commit/2d9e5e98
Link: https://github.com/acpica/acpica/commit/93735815

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-07 19:09:00 +02:00
Eric Auger 4cffb2df42 KVM: selftests: vgic_init kvm selftests fixup
Bring some improvements/rationalization over the first version
of the vgic_init selftests:

- ucall_init is moved in run_cpu()
- vcpu_args_set is not called as not needed
- whenever a helper is supposed to succeed, call the non "_" version
- helpers do not return -errno, instead errno is checked by the caller
- vm_gic struct is used whenever possible, as well as vm_gic_destroy
- _kvm_create_device takes an addition fd parameter

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210407135937.533141-1-eric.auger@redhat.com
2021-04-07 15:50:50 +01:00
Wan Jiabing 69baf1a2a4 perf mem-events: Remove unnecessary 'struct mem_info' forward declaration
'struct mem_info' is defined at 22nd line.

The declaration here is unnecessary. Remove it.

Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kael_w@yeah.net
Link: http://lore.kernel.org/lkml/20210406105104.675879-1-wanjiabing@vivo.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-06 13:32:03 -03:00