Add some structures and defines that were recently added to
the protocol documentation (see MS-FSCC sections 2.3.29-2.3.34).
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix two unused variables in commit
"add support for stat of WSL reparse points for special file types"
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Cross-tree/merge window issues:
- rtl8150: don't incorrectly assign random MAC addresses; fix late
in the 5.9 cycle started depending on a return code from
a function which changed with the 5.10 PR from the usb subsystem
Current release - regressions:
- Revert "virtio-net: ethtool configurable RXCSUM", it was causing
crashes at probe when control vq was not negotiated/available
Previous releases - regressions:
- ixgbe: fix probing of multi-port 10 Gigabit Intel NICs with an MDIO
bus, only first device would be probed correctly
- nexthop: Fix performance regression in nexthop deletion by
effectively switching from recently added synchronize_rcu()
to synchronize_rcu_expedited()
- netsec: ignore 'phy-mode' device property on ACPI systems;
the property is not populated correctly by the firmware,
but firmware configures the PHY so just keep boot settings
Previous releases - always broken:
- tcp: fix to update snd_wl1 in bulk receiver fast path, addressing
bulk transfers getting "stuck"
- icmp: randomize the global rate limiter to prevent attackers from
getting useful signal
- r8169: fix operation under forced interrupt threading, make the
driver always use hard irqs, even on RT, given the handler is
light and only wants to schedule napi (and do so through
a _irqoff() variant, preferably)
- bpf: Enforce pointer id generation for all may-be-null register
type to avoid pointers erroneously getting marked as null-checked
- tipc: re-configure queue limit for broadcast link
- net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN
tunnels
- fix various issues in chelsio inline tls driver
Misc:
- bpf: improve just-added bpf_redirect_neigh() helper api to support
supplying nexthop by the caller - in case BPF program has already
done a lookup we can avoid doing another one
- remove unnecessary break statements
- make MCTCP not select IPV6, but rather depend on it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ceke
-----END PGP SIGNATURE-----
Merge tag 'net-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Cross-tree/merge window issues:
- rtl8150: don't incorrectly assign random MAC addresses; fix late in
the 5.9 cycle started depending on a return code from a function
which changed with the 5.10 PR from the usb subsystem
Current release regressions:
- Revert "virtio-net: ethtool configurable RXCSUM", it was causing
crashes at probe when control vq was not negotiated/available
Previous release regressions:
- ixgbe: fix probing of multi-port 10 Gigabit Intel NICs with an MDIO
bus, only first device would be probed correctly
- nexthop: Fix performance regression in nexthop deletion by
effectively switching from recently added synchronize_rcu() to
synchronize_rcu_expedited()
- netsec: ignore 'phy-mode' device property on ACPI systems; the
property is not populated correctly by the firmware, but firmware
configures the PHY so just keep boot settings
Previous releases - always broken:
- tcp: fix to update snd_wl1 in bulk receiver fast path, addressing
bulk transfers getting "stuck"
- icmp: randomize the global rate limiter to prevent attackers from
getting useful signal
- r8169: fix operation under forced interrupt threading, make the
driver always use hard irqs, even on RT, given the handler is light
and only wants to schedule napi (and do so through a _irqoff()
variant, preferably)
- bpf: Enforce pointer id generation for all may-be-null register
type to avoid pointers erroneously getting marked as null-checked
- tipc: re-configure queue limit for broadcast link
- net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN
tunnels
- fix various issues in chelsio inline tls driver
Misc:
- bpf: improve just-added bpf_redirect_neigh() helper api to support
supplying nexthop by the caller - in case BPF program has already
done a lookup we can avoid doing another one
- remove unnecessary break statements
- make MCTCP not select IPV6, but rather depend on it"
* tag 'net-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
tcp: fix to update snd_wl1 in bulk receiver fast path
net: Properly typecast int values to set sk_max_pacing_rate
netfilter: nf_fwd_netdev: clear timestamp in forwarding path
ibmvnic: save changed mac address to adapter->mac_addr
selftests: mptcp: depends on built-in IPv6
Revert "virtio-net: ethtool configurable RXCSUM"
rtnetlink: fix data overflow in rtnl_calcit()
net: ethernet: mtk-star-emac: select REGMAP_MMIO
net: hdlc_raw_eth: Clear the IFF_TX_SKB_SHARING flag after calling ether_setup
net: hdlc: In hdlc_rcv, check to make sure dev is an HDLC device
bpf, libbpf: Guard bpf inline asm from bpf_tail_call_static
bpf, selftests: Extend test_tc_redirect to use modified bpf_redirect_neigh()
bpf: Fix bpf_redirect_neigh helper api to support supplying nexthop
mptcp: depends on IPV6 but not as a module
sfc: move initialisation of efx->filter_sem to efx_init_struct()
mpls: load mpls_gso after mpls_iptunnel
net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN tunnels
net/sched: act_gate: Unlock ->tcfa_lock in tc_setup_flow_action()
net: dsa: bcm_sf2: make const array static, makes object smaller
mptcp: MPTCP_IPV6 should depend on IPV6 instead of selecting it
...
* Use iomap for non-journaled buffered I/O. This largely eliminates buffer
heads on filesystems where the block size matches the page size. Many thanks
to Christoph Hellwig for this patch!
* Fixes for some more journaled data filesystem bugs, found by running xfstests
with data journaling on for all files (chattr +j $MNT) (Bob Peterson).
* gfs2_evict_inode refactoring (Bob Peterson).
* Use the statfs data in the journal during recovery instead of reading it in
from the local statfs inodes (Abhi Das).
* Several other minor fixes by various people.
-----BEGIN PGP SIGNATURE-----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=C893
-----END PGP SIGNATURE-----
Merge tag 'gfs2-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
- Use iomap for non-journaled buffered I/O. This largely eliminates
buffer heads on filesystems where the block size matches the page
size. Many thanks to Christoph Hellwig for this patch!
- Fixes for some more journaled data filesystem bugs, found by running
xfstests with data journaling on for all files (chattr +j $MNT) (Bob
Peterson)
- gfs2_evict_inode refactoring (Bob Peterson)
- Use the statfs data in the journal during recovery instead of reading
it in from the local statfs inodes (Abhi Das)
- Several other minor fixes by various people
* tag 'gfs2-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (30 commits)
gfs2: Recover statfs info in journal head
gfs2: lookup local statfs inodes prior to journal recovery
gfs2: Add fields for statfs info in struct gfs2_log_header_host
gfs2: Ignore subsequent errors after withdraw in rgrp_go_sync
gfs2: Eliminate gl_vm
gfs2: Only access gl_delete for iopen glocks
gfs2: Fix comments to glock_hash_walk
gfs2: eliminate GLF_QUEUED flag in favor of list_empty(gl_holders)
gfs2: Ignore journal log writes for jdata holes
gfs2: simplify gfs2_block_map
gfs2: Only set PageChecked if we have a transaction
gfs2: don't lock sd_ail_lock in gfs2_releasepage
gfs2: make gfs2_ail1_empty_one return the count of active items
gfs2: Wipe jdata and ail1 in gfs2_journal_wipe, formerly gfs2_meta_wipe
gfs2: enhance log_blocks trace point to show log blocks free
gfs2: add missing log_blocks trace points in gfs2_write_revokes
gfs2: rename gfs2_write_full_page to gfs2_write_jdata_page, remove parm
gfs2: add validation checks for size of superblock
gfs2: use-after-free in sysfs deregistration
gfs2: Fix NULL pointer dereference in gfs2_rgrp_dump
...
-----BEGIN PGP SIGNATURE-----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=CqG0
-----END PGP SIGNATURE-----
Merge tag '5.10-rc-smb3-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs updates from Steve French:
- add support for recognizing special file types (char/block/fifo/
symlink) for files created by Linux on WSL (a format we plan to move
to as the default for creating special files on Linux, as it has
advantages over the other current option, the SFU format) in readdir.
- fix double queries to root directory when directory leases not
supported (e.g. Samba)
- fix querying mode bits (modefromsid mount option) for special file
types
- stronger encryption (gcm256), disabled by default until tested more
broadly
- allow querying owner when server reports 'well known SID' on query
dir with SMB3.1.1 POSIX extensions
* tag '5.10-rc-smb3-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6: (30 commits)
SMB3: add support for recognizing WSL reparse tags
cifs: remove bogus debug code
smb3.1.1: fix typo in compression flag
cifs: move smb version mount options into fs_context.c
cifs: move cache mount options to fs_context.ch
cifs: move security mount options into fs_context.ch
cifs: add files to host new mount api
smb3: do not try to cache root directory if dir leases not supported
smb3: fix stat when special device file and mounted with modefromsid
cifs: Print the address and port we are connecting to in generic_ip_connect()
SMB3: Resolve data corruption of TCP server info fields
cifs: make const array static, makes object smaller
SMB3.1.1: Fix ids returned in POSIX query dir
smb3: add dynamic trace point to trace when credits obtained
smb3.1.1: do not fail if no encryption required but server doesn't support it
cifs: Return the error from crypt_message when enc/dec key not found.
smb3.1.1: set gcm256 when requested
smb3.1.1: rename nonces used for GCM and CCM encryption
smb3.1.1: print warning if server does not support requested encryption type
smb3.1.1: add new module load parm enable_gcm_256
...
- Move the file range remap generic functions out of mm/filemap.c and
fs/read_write.c and into fs/remap_range.c to reduce clutter in the first
two files.
-----BEGIN PGP SIGNATURE-----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=DAPl
-----END PGP SIGNATURE-----
Merge tag 'vfs-5.10-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull clone/dedupe/remap code refactoring from Darrick Wong:
"Move the generic file range remap (aka reflink and dedupe) functions
out of mm/filemap.c and fs/read_write.c and into fs/remap_range.c to
reduce clutter in the first two files"
* tag 'vfs-5.10-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
vfs: move the generic write and copy checks out of mm
vfs: move the remap range helpers to remap_range.c
vfs: move generic_remap_checks out of mm
I tested this driver on my HP PA-RISC C3000 workstation and it does
work with the built-in TEAC CD-532E-B CD-ROM drive.
So drop the TODO item and adjust the file header.
Signed-off-by: Helge Deller <deller@gmx.de>
Some functions have different names between their prototypes
and the kernel-doc markup.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- New page table code for both hypervisor and guest stage-2
- Introduction of a new EL2-private host context
- Allow EL2 to have its own private per-CPU variables
- Support of PMU event filtering
- Complete rework of the Spectre mitigation
PPC:
- Fix for running nested guests with in-kernel IRQ chip
- Fix race condition causing occasional host hard lockup
- Minor cleanups and bugfixes
x86:
- allow trapping unknown MSRs to userspace
- allow userspace to force #GP on specific MSRs
- INVPCID support on AMD
- nested AMD cleanup, on demand allocation of nested SVM state
- hide PV MSRs and hypercalls for features not enabled in CPUID
- new test for MSR_IA32_TSC writes from host and guest
- cleanups: MMU, CPUID, shared MSRs
- LAPIC latency optimizations ad bugfixes
For x86, also included in this pull request is a new alternative and
(in the future) more scalable implementation of extended page tables
that does not need a reverse map from guest physical addresses to
host physical addresses. For now it is disabled by default because
it is still lacking a few of the existing MMU's bells and whistles.
However it is a very solid piece of work and it is already available
for people to hammer on it.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl+S8dsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroM40Af+M46NJmuS5rcwFfybvK/c42KT6svX
Co1NrZDwzSQ2mMy3WQzH9qeLvb+nbY4sT3n5BPNPNsT+aIDPOTDt//qJ2/Ip9UUs
tRNea0MAR96JWLE7MSeeRxnTaQIrw/AAZC0RXFzZvxcgytXwdqBExugw4im+b+dn
Dcz8QxX1EkwT+4lTm5HC0hKZAuo4apnK1QkqCq4SdD2QVJ1YE6+z7pgj4wX7xitr
STKD6q/Yt/0ndwqS0GSGbyg0jy6mE620SN6isFRkJYwqfwLJci6KnqvEK67EcNMu
qeE017K+d93yIVC46/6TfVHzLR/D1FpQ8LZ16Yl6S13OuGIfAWBkQZtPRg==
=AD6a
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"For x86, there is a new alternative and (in the future) more scalable
implementation of extended page tables that does not need a reverse
map from guest physical addresses to host physical addresses.
For now it is disabled by default because it is still lacking a few of
the existing MMU's bells and whistles. However it is a very solid
piece of work and it is already available for people to hammer on it.
Other updates:
ARM:
- New page table code for both hypervisor and guest stage-2
- Introduction of a new EL2-private host context
- Allow EL2 to have its own private per-CPU variables
- Support of PMU event filtering
- Complete rework of the Spectre mitigation
PPC:
- Fix for running nested guests with in-kernel IRQ chip
- Fix race condition causing occasional host hard lockup
- Minor cleanups and bugfixes
x86:
- allow trapping unknown MSRs to userspace
- allow userspace to force #GP on specific MSRs
- INVPCID support on AMD
- nested AMD cleanup, on demand allocation of nested SVM state
- hide PV MSRs and hypercalls for features not enabled in CPUID
- new test for MSR_IA32_TSC writes from host and guest
- cleanups: MMU, CPUID, shared MSRs
- LAPIC latency optimizations ad bugfixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (232 commits)
kvm: x86/mmu: NX largepage recovery for TDP MMU
kvm: x86/mmu: Don't clear write flooding count for direct roots
kvm: x86/mmu: Support MMIO in the TDP MMU
kvm: x86/mmu: Support write protection for nesting in tdp MMU
kvm: x86/mmu: Support disabling dirty logging for the tdp MMU
kvm: x86/mmu: Support dirty logging for the TDP MMU
kvm: x86/mmu: Support changed pte notifier in tdp MMU
kvm: x86/mmu: Add access tracking for tdp_mmu
kvm: x86/mmu: Support invalidate range MMU notifier for TDP MMU
kvm: x86/mmu: Allocate struct kvm_mmu_pages for all pages in TDP MMU
kvm: x86/mmu: Add TDP MMU PF handler
kvm: x86/mmu: Remove disallowed_hugepage_adjust shadow_walk_iterator arg
kvm: x86/mmu: Support zapping SPTEs in the TDP MMU
KVM: Cache as_id in kvm_memory_slot
kvm: x86/mmu: Add functions to handle changed TDP SPTEs
kvm: x86/mmu: Allocate and free TDP MMU roots
kvm: x86/mmu: Init / Uninit the TDP MMU
kvm: x86/mmu: Introduce tdp_iter
KVM: mmu: extract spte.h and spte.c
KVM: mmu: Separate updating a PTE from kvm_set_pte_rmapp
...
The commit 75ae04206a ("parisc: Define O_NONBLOCK to become
000200000") changed the O_NONBLOCK constant to have only one bit set
(like all other architectures). This change broke some existing
userspace code (e.g. udevadm, systemd-udevd, elogind) which called
specific syscalls which do strict value checking on their flag
parameter.
This patch adds wrapper functions for the relevant syscalls. The
wrappers masks out any old invalid O_NONBLOCK flags, reports in the
syslog if the old O_NONBLOCK value was used and then calls the target
syscall with the new O_NONBLOCK value.
Fixes: 75ae04206a ("parisc: Define O_NONBLOCK to become 000200000")
Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: Meelis Roos <mroos@linux.ee>
Tested-by: Jeroen Roovers <jer@xs4all.nl>
A very quiet cycle, no new features.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl+QSnEPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpvzoIAIAJPV0OTShpvv8JXmBDngDGysuAcQah+d3u
g2vDzRb9J3lYH7hJgkHans/4s3wYtWcJei7tgU2UkSODTSPK/l+hp4sTuVowsqPD
Cvp6k7/ipzJscl2AAiflSn5gBUORHXU8oxEeDvUAJbVkSwWdKvKgvDGPbVxZCU0V
kGlUctRq96e/TQCNekVthZ1Q4cgPKgx4zMFZjLSbj0yDN2JJJp+0Y+y5NJ5u9eTE
VneaFZOJxlhjmNZZP1Bu/MOcvgPbjxZjDRRUP75sv8c7IkoGiubHbbwcDhbE5gVd
Ve/ByiFTJe9ydKVVLm1O81AqO7uB13W46LjF5yotyk/dKX6s5eU=
=1Gdh
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"vhost, vdpa, and virtio cleanups and fixes
A very quiet cycle, no new features"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
MAINTAINERS: add URL for virtio-mem
vhost_vdpa: remove unnecessary spin_lock in vhost_vring_call
vringh: fix __vringh_iov() when riov and wiov are different
vdpa/mlx5: Setup driver only if VIRTIO_CONFIG_S_DRIVER_OK
s390: virtio: PV needs VIRTIO I/O device protection
virtio: let arch advertise guest's memory access restrictions
vhost_vdpa: Fix duplicate included kernel.h
vhost: reduce stack usage in log_used
virtio-mem: Constify mem_id_table
virtio_input: Constify id_table
virtio-balloon: Constify id_table
vdpa/mlx5: Fix failure to bring link up
vdpa/mlx5: Make use of a specific 16 bit endianness API
cros-ec:
* Error code cleanup across cros-ec by Guenter.
* Remove cros_ec_cmd_xfer in favor of cros_ec_cmd_xfer_status.
cros_ec_typec:
* Landed initial USB4 support in typec connector class driver for cros_ec.
* Role switch bugfix on disconnect, and reordering configuration steps.
cros_ec_lightbar:
* Fix buffer outsize and result for get_lightbar_version.
misc:
* Remove config MFD_CROS_EC, now that transition from MFD is complete.
* Enable KEY_LEFTMETA in new location on arm based cros-ec-keyboard keymap.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQCtZK6p/AktxXfkOlzbaomhzOwwgUCX5G2IAAKCRBzbaomhzOw
wo4JAQC7BcJJwYgoVnRQvYd4xXCEsl/F9cVFJJLRYAH/PA4x6gEA+wfdIxebAXbO
RapU2HOppxiQGFkr+0FX5xV+O7cRNAo=
=gkul
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
"cros-ec:
- Error code cleanup across cros-ec by Guenter
- Remove cros_ec_cmd_xfer in favor of cros_ec_cmd_xfer_status
cros_ec_typec:
- Landed initial USB4 support in typec connector class driver for
cros_ec
- Role switch bugfix on disconnect, and reordering configuration
steps
cros_ec_lightbar:
- Fix buffer outsize and result for get_lightbar_version
misc:
- Remove config MFD_CROS_EC, now that transition from MFD is complete
- Enable KEY_LEFTMETA in new location on arm based cros-ec-keyboard
keymap"
* tag 'tag-chrome-platform-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
ARM: dts: cros-ec-keyboard: Add alternate keymap for KEY_LEFTMETA
platform/chrome: Use kobj_to_dev() instead of container_of()
platform/chrome: cros_ec_proto: Drop cros_ec_cmd_xfer()
platform/chrome: cros_ec_proto: Update cros_ec_cmd_xfer() call-sites
platform/chrome: Kconfig: Remove the transitional MFD_CROS_EC config
platform/chrome: cros_ec_lightbar: Reduce ligthbar get version command
platform/chrome: cros_ec_trace: Add fields to command traces
platform/chrome: cros_ec_typec: Re-order connector configuration steps
platform/chrome: cros_ec_typec: Avoid setting usb role twice during disconnect
platform/chrome: cros_ec_typec: Send enum values to usb_role_switch_set_role()
platform/chrome: cros_ec_typec: USB4 support
pwm: cros-ec: Simplify EC error handling
platform/chrome: cros_ec_proto: Convert EC error codes to Linux error codes
platform/input: cros_ec: Replace -ENOTSUPP with -ENOPROTOOPT
pwm: cros-ec: Accept more error codes from cros_ec_cmd_xfer_status
platform/chrome: cros_ec_sysfs: Report range of error codes from EC
cros_ec_lightbar: Accept more error codes from cros_ec_cmd_xfer_status
iio: cros_ec: Accept -EOPNOTSUPP as 'not supported' error code
-----BEGIN PGP SIGNATURE-----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=aVWo
-----END PGP SIGNATURE-----
Merge tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-block
Pull arch task_work cleanups from Jens Axboe:
"Two cleanups that don't fit other categories:
- Finally get the task_work_add() cleanup done properly, so we don't
have random 0/1/false/true/TWA_SIGNAL confusing use cases. Updates
all callers, and also fixes up the documentation for
task_work_add().
- While working on some TIF related changes for 5.11, this
TIF_NOTIFY_RESUME cleanup fell out of that. Remove some arch
duplication for how that is handled"
* tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-block:
task_work: cleanup notification modes
tracehook: clear TIF_NOTIFY_RESUME in tracehook_notify_resume()
-----BEGIN PGP SIGNATURE-----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=OtSA
-----END PGP SIGNATURE-----
Merge tag 'arc-5.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fix from Vineet Gupta:
"I found a snafu in perf driver which made it into 5.9-rc4 and the fix
should go in now than wait"
* tag 'arc-5.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: perf: redo the pct irq missing in device-tree handling
- Improve performance of Spectre-v2 mitigation on Falkor CPUs (if you're lucky
enough to have one)
- Select HAVE_MOVE_PMD. This has been shown to improve mremap() performance,
which is used heavily by the Android runtime GC, and it seems we forgot to
enable this upstream back in 2018.
- Ensure linker flags are consistent between LLVM and BFD
- Fix stale comment in Spectre mitigation rework
- Fix broken copyright header
- Fix KASLR randomisation of the linear map
- Prevent arm64-specific prctl()s from compat tasks (return -EINVAL)
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl+QEPAQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNE8jB/0YNYKO9mis/Xn5KcOCwlg4dbc2uVBknZXD
f7otEJ6SOax2HcWz8qJlrJ+qbGFawPIqFBUAM0vU1VmoyctIoKRFTA8ACfWfWtnK
QBfHrcxtJCh/GGq+E1IyuqWzCjppeY/7gYVdgi1xDEZRSaLz53MC1GVBwKBtu5cf
X2Bfm8d9+PSSnmKfpO65wSCTvN3PQX1SNEHwwTWFZQx0p7GcQK1DdwoobM6dRnVy
+e984ske+2a+nTrkhLSyQIgsfHuLB4pD6XdM/UOThnfdNxdQ0dUGn375sXP+b4dW
7MTH9HP/dXIymTcuErMXOHJXLk/zUiUBaOxkmOxdvrhQd0uFNFIc
=e9p9
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull more arm64 updates from Will Deacon:
"A small selection of further arm64 fixes and updates. Most of these
are fixes that came in during the merge window, with the exception of
the HAVE_MOVE_PMD mremap() speed-up which we discussed back in 2018
and somehow forgot to enable upstream.
- Improve performance of Spectre-v2 mitigation on Falkor CPUs (if
you're lucky enough to have one)
- Select HAVE_MOVE_PMD. This has been shown to improve mremap()
performance, which is used heavily by the Android runtime GC, and
it seems we forgot to enable this upstream back in 2018.
- Ensure linker flags are consistent between LLVM and BFD
- Fix stale comment in Spectre mitigation rework
- Fix broken copyright header
- Fix KASLR randomisation of the linear map
- Prevent arm64-specific prctl()s from compat tasks (return -EINVAL)"
Link: https://lore.kernel.org/kvmarm/20181108181201.88826-3-joelaf@google.com/
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: proton-pack: Update comment to reflect new function name
arm64: spectre-v2: Favour CPU-specific mitigation at EL2
arm64: link with -z norelro regardless of CONFIG_RELOCATABLE
arm64: Fix a broken copyright header in gen_vdso_offsets.sh
arm64: mremap speedup - Enable HAVE_MOVE_PMD
arm64: mm: use single quantity to represent the PA to VA translation
arm64: reject prctl(PR_PAC_RESET_KEYS) on compat tasks
* pm-avs:
PM: AVS: Drop the avs directory and the corresponding Kconfig
PM: AVS: qcom-cpr: Move the driver to the qcom specific drivers
PM: AVS: smartreflex Move driver to soc specific drivers
PM: AVS: rockchip-io: Move the driver to the rockchip specific drivers
* pm-cpufreq:
cpufreq: schedutil: restore cached freq when next_f is not changed
acpi-cpufreq: Honor _PSD table setting on new AMD CPUs
cpufreq: intel_pstate: Delete intel_pstate sysfs if failed to register the driver
cpufreq: Improve code around unlisted freq check
* pm-cpuidle:
intel_idle: Ignore _CST if control cannot be taken from the platform
cpuidle: Remove pointless stub
intel_idle: mention assumption that WBINVD is not needed
MAINTAINERS: Add section for cpuidle-psci PM domain
Apply the outstanding statfs changes in the journal head to the
master statfs file. Zero out the local statfs file for good measure.
Previously, statfs updates would be read in from the local statfs inode and
synced to the master statfs inode during recovery.
We now use the statfs updates in the journal head to update the master statfs
inode instead of reading in from the local statfs inode. To preserve backward
compatibility with kernels that can't do this, we still need to keep the
local statfs inode up to date by writing changes to it. At some point in the
future, we can do away with the local statfs inodes altogether and keep the
statfs changes solely in the journal.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
We need to lookup the master statfs inode and the local statfs
inodes earlier in the mount process (in init_journal) so journal
recovery can use them when it attempts to recover the statfs info.
We lookup all the local statfs inodes and store them in a linked
list to allow a node to recover statfs info for other nodes in the
cluster.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
- rdma error handling fixes (Chao Leng)
- fc error handling and reconnect fixes (James Smart)
- fix the qid displace when tracing ioctl command (Keith Busch)
- don't use BLK_MQ_REQ_NOWAIT for passthru (Chaitanya Kulkarni)
- fix MTDT for passthru (Logan Gunthorpe)
- blacklist Write Same on more devices (Kai-Heng Feng)
- fix an uninitialized work struct (zhenwei pi)
-----BEGIN PGP SIGNATURE-----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=gjYy
-----END PGP SIGNATURE-----
Merge tag 'nvme-5.10-2020-10-23' of git://git.infradead.org/nvme into block-5.10
Pull NVMe fixes from Christoph:
"nvme fixes for 5.10
- rdma error handling fixes (Chao Leng)
- fc error handling and reconnect fixes (James Smart)
- fix the qid displace when tracing ioctl command (Keith Busch)
- don't use BLK_MQ_REQ_NOWAIT for passthru (Chaitanya Kulkarni)
- fix MTDT for passthru (Logan Gunthorpe)
- blacklist Write Same on more devices (Kai-Heng Feng)
- fix an uninitialized work struct (zhenwei pi)"
* tag 'nvme-5.10-2020-10-23' of git://git.infradead.org/nvme:
nvme-fc: shorten reconnect delay if possible for FC
nvme-fc: wait for queues to freeze before calling update_hr_hw_queues
nvme-fc: fix error loop in create_hw_io_queues
nvme-fc: fix io timeout to abort I/O
nvmet: don't use BLK_MQ_REQ_NOWAIT for passthru
nvmet: cleanup nvmet_passthru_map_sg()
nvmet: limit passthru MTDS by BIO_MAX_PAGES
nvmet: fix uninitialized work for zero kato
nvme-pci: disable Write Zeroes on Sandisk Skyhawk
nvme: use queuedata for nvme_req_qid
nvme-rdma: fix crash due to incorrect cqe
nvme-rdma: fix crash when connect rejected
We've had several complaints about a 10s reconnect delay (the default)
when there was an error while there is connectivity to a subsystem.
The max_reconnects and reconnect_delay are set in common code prior to
calling the transport to create the controller.
This change checks if the default reconnect delay is being used, and if
so, it adjusts it to a shorter period (2s) for the nvme-fc transport.
It does so by calculating the controller loss tmo window, changing the
value of the reconnect delay, and then recalculating the maximum number
of reconnect attempts allowed.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
On reconnect, the code currently does not freeze the controller before
possibly updating the number hw queues for the controller.
Add the freeze before updating the number of hw queues. Note: the queues
are already started and remain started through the reconnect.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The loop that backs out of hw io queue creation continues through index
0, which corresponds to the admin queue as well.
Fix the loop so it only proceeds through indexes 1..n which correspond to
I/O queues.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Currently, an I/O timeout unconditionally invokes
nvme_fc_error_recovery() which checks for LIVE or CONNECTING state. If
live, the routine resets the controller which initiates a reconnect -
which is valid. If CONNECTING, err_work is scheduled. Err_work then
calls the terminate_io routine, which also checks for CONNECTING and
noops any further action on outstanding I/O. The result is nothing
happened to the timed out io. As such, if the command was dropped on
the wire, it will never timeout / complete, and the connect process
will hang.
Change the behavior of the io timeout routine to unconditionally abort
the I/O. I/O completion handling will note that an io failed due to an
abort and will terminate the connection / association as needed. If the
abort was unable to happen, continue with a call to
nvme_fc_error_recovery(). To ensure something different happens in
nvme_fc_error_recovery() rework it so at it will abort all I/Os on the
association to force a failure.
As I/O aborts now may occur outside of delete_association, counting for
completion must be wary and only count those aborted during
delete_association when TERMIO is set on the controller.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The kernel boot parameter xen.fifo_events isn't listed in
Documentation/admin-guide/kernel-parameters.txt. Add it.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Link: https://lore.kernel.org/r/20201022094907.28560-6-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Unmasking an event channel with fifo events channels being used can
require a hypercall to be made, so try to avoid that by checking
whether the event channel was really masked.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Link: https://lore.kernel.org/r/20201022094907.28560-5-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
xen_debug_interrupt() is specific to 2-level event handling. So don't
register it with fifo event handling being active.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Link: https://lore.kernel.org/r/20201022094907.28560-4-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
The struct irq_info of Xen's event handling is used only for two
evtchn_ops functions outside of events_base.c. Those two functions
can easily be switched to avoid that usage.
This allows to make struct irq_info and its related access functions
private to events_base.c.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Link: https://lore.kernel.org/r/20201022094907.28560-3-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
With the switch to the lateeoi model for interdomain event channels
some functions are no longer in use. Remove them.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Link: https://lore.kernel.org/r/20201022094907.28560-2-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Document the new dma_alloc_pages and dma_free_pages APIs, and fix
up the documentation for dma_alloc_noncoherent and dma_free_noncoherent.
Reported-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
When KVM maps a largepage backed region at a lower level in order to
make it executable (i.e. NX large page shattering), it reduces the TLB
performance of that region. In order to avoid making this degradation
permanent, KVM must periodically reclaim shattered NX largepages by
zapping them and allowing them to be rebuilt in the page fault handler.
With this patch, the TDP MMU does not respect KVM's rate limiting on
reclaim. It traverses the entire TDP structure every time. This will be
addressed in a future patch.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-21-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Direct roots don't have a write flooding count because the guest can't
affect that paging structure. Thus there's no need to clear the write
flooding count on a fast CR3 switch for direct roots.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-20-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to support MMIO, KVM must be able to walk the TDP paging
structures to find mappings for a given GFN. Support this walk for
the TDP MMU.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
v2: Thanks to Dan Carpenter and kernel test robot for finding that root
was used uninitialized in get_mmio_spte.
Signed-off-by: Ben Gardon <bgardon@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Message-Id: <20201014182700.2888246-19-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To support nested virtualization, KVM will sometimes need to write
protect pages which are part of a shadowed paging structure or are not
writable in the shadowed paging structure. Add a function to write
protect GFN mappings for this purpose.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-18-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Dirty logging ultimately breaks down MMU mappings to 4k granularity.
When dirty logging is no longer needed, these granaular mappings
represent a useless performance penalty. When dirty logging is disabled,
search the paging structure for mappings that could be re-constituted
into a large page mapping. Zap those mappings so that they can be
faulted in again at a higher mapping level.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-17-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Dirty logging is a key feature of the KVM MMU and must be supported by
the TDP MMU. Add support for both the write protection and PML dirty
logging modes.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-16-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to interoperate correctly with the rest of KVM and other Linux
subsystems, the TDP MMU must correctly handle various MMU notifiers. Add
a hook and handle the change_pte MMU notifier.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-15-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to interoperate correctly with the rest of KVM and other Linux
subsystems, the TDP MMU must correctly handle various MMU notifiers. The
main Linux MM uses the access tracking MMU notifiers for swap and other
features. Add hooks to handle the test/flush HVA (range) family of
MMU notifiers.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-14-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to interoperate correctly with the rest of KVM and other Linux
subsystems, the TDP MMU must correctly handle various MMU notifiers. Add
hooks to handle the invalidate range family of MMU notifiers.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-13-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Attach struct kvm_mmu_pages to every page in the TDP MMU to track
metadata, facilitate NX reclaim, and enable inproved parallelism of MMU
operations in future patches.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-12-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add functions to handle page faults in the TDP MMU. These page faults
are currently handled in much the same way as the x86 shadow paging
based MMU, however the ordering of some operations is slightly
different. Future patches will add eager NX splitting, a fast page fault
handler, and parallel page faults.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-11-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Initialize reserved MOCS indices (Ayaz)
- Mark initial fb obj as WT on eLLC machines to avoid rcu lockup (Ville)
- Support parsing of oversize batches (Chris)
- Delay execlists processing for TGL (Chris)
- Use the active reference on the vma during error capture (Chris)
- Widen CSB pointer (Chris)
- Wait for CSB entries on TGL (Chris)
- Fix unwind for scratch page allocation (Chris)
- Exclude low patches of stolen memory (Chris)
- Force VT'd workarounds when running as a guest OS (Chris)
- Drop runtime-pm assert from vpgu io accessors (Chris)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAl+R8a4ACgkQ+mJfZA7r
E8oazwgAu+NP5GlIHTcG6bV4vxRaEDdlDf3uH+ENOGfRT0PoX6qVNpkdc/nmTZC/
RFzHVsKJi1zXS9XetP33YKZ7KFPZxJMXdhGSu+f08Q6nf0jBdFUm3mhnrDWoLO9+
fS88L4HqXREvBLDctN89akuZ1/pZ3p0KsBqAOuP+LjRAsquHgIP3eUzwZMVbTgTZ
KLojKMHHrZxRtynMFrW6JO+gBok+mGydpOp7F1bK4jSmOIlYA5OsIW3xn9+Ytveu
9Od/yIjKeCyPD64ncz8wcbcPxZhnXENzZElBYT6sQSHDZ9wNCOUhfJT0v8t8G5So
vzOvf2YXa+2IKiGY2sd2ov9svz3Wgg==
=oidT
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-fixes-2020-10-22' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Tweak initia DPCD backlight.enabled value (Sean)
- Initialize reserved MOCS indices (Ayaz)
- Mark initial fb obj as WT on eLLC machines to avoid rcu lockup (Ville)
- Support parsing of oversize batches (Chris)
- Delay execlists processing for TGL (Chris)
- Use the active reference on the vma during error capture (Chris)
- Widen CSB pointer (Chris)
- Wait for CSB entries on TGL (Chris)
- Fix unwind for scratch page allocation (Chris)
- Exclude low patches of stolen memory (Chris)
- Force VT'd workarounds when running as a guest OS (Chris)
- Drop runtime-pm assert from vpgu io accessors (Chris)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201022205613.GA3469192@intel.com
When starting a HP machine with HIL driver but without an HIL keyboard
or HIL mouse attached, it may happen that data written to the HIL loop
gets stuck (e.g. because the transaction queue is full). Usually one
will then have to reboot the machine because all you see is and endless
output of:
Transaction add failed: transaction already queued?
In the higher layers hp_sdc_enqueue_transaction() is called to queued up
a HIL packet. This function returns an error code, and this patch adds
the necessary checks for this return code and disables the HIL driver if
further packets can't be sent.
Tested on a HP 730 and a HP 715/64 machine.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
Steve French