Commit Graph

17 Commits

Author SHA1 Message Date
Bartlomiej Zolnierkiewicz e957b60d15 ide-gd: implement block device ->set_capacity method (v2)
* Use ->probed_capacity to store native device capacity for ATA disks.

* Add ->set_capacity method to struct ide_disk_ops.

* Implement disk device ->set_capacity method for ATA disks.

* Implement block device ->set_capacity method.

v2:
* Check if LBA and HPA are supported in ide_disk_set_capacity().

* According to the spec the SET MAX ADDRESS command shall be
  immediately preceded by a READ NATIVE MAX ADDRESS command.

* Add ide_disk_hpa_{get_native,set}_capacity() helpers.

Together with the previous patch adding ->set_capacity block device
method this allows automatic disabling of Host Protected Area (HPA)
if any partitions overlapping HPA are detected.

Cc: Robert Hancock <hancockrwd@gmail.com>
Cc: Frans Pop <elendil@planet.nl>
Cc: "Andries E. Brouwer" <Andries.Brouwer@cwi.nl>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Emphatically-Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-07 13:52:52 +02:00
Bruno Prémont b0aedb04ea ide: Stop disks on reboot for laptop which cuts power
My laptop (Acer Travelmate 660) always cuts the power when rebooting
which causes the disk to emergency-park it's head.

Add a dmi check to stop disk as for shutdown on this laptop.

Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-22 20:33:41 +02:00
Bartlomiej Zolnierkiewicz 3ee38302ff ide: remove ->end_request method
* Handle completion of private driver requests explicitly
  for ide_floppy and ide_tape media in ide_kill_rq().

* Remove no longer needed ->end_request method.

There should be no functional changes caused by this patch.

Acked-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-27 12:46:36 +01:00
Borislav Petkov 088b1b8860 ide: improve debugging scheme
and more specifically, push __func__ into debug
macro thus making ide_debug_log() calls shorter and more readable.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-03-27 12:46:19 +01:00
Bartlomiej Zolnierkiewicz 8fed436841 ide: fix refcounting in device drivers
During host driver module removal del_gendisk() results in a final
put on drive->gendev and freeing the drive by drive_release_dev().

Convert device drivers from using struct kref to use struct device
so device driver's object holds reference on ->gendev and prevents
drive from prematurely going away.

Also fix ->remove methods to not erroneously drop reference on a
host driver by using only put_device() instead of ide*_put().

Reported-by: Stanislaw Gruszka <stf_xl@wp.pl>
Tested-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-02-25 20:28:24 +01:00
Bartlomiej Zolnierkiewicz 627e05daa1 ide: remove ->error method from struct ide_driver
* Remove (now superfluous) ->error method from struct ide_driver.

* Unexport __ide_error() and make it static.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06 17:20:54 +01:00
Bartlomiej Zolnierkiewicz 7f3c868ba7 ide: remove ide_driver_t typedef
While at it:
- s/struct ide_driver_s/struct ide_driver/
- use to_ide_driver() macro in ide-proc.c

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06 17:20:53 +01:00
Borislav Petkov 52ebb438e9 ide-gd: re-get capacity on revalidate
We need to re-get a removable media's capacity when revalidating the
disk so that its partitions get rescanned by the block layer.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: axboe@kernel.dk
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-11-02 21:40:10 +01:00
Al Viro b2f21e057d [PATCH] switch ide-gd
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:48:25 -04:00
Al Viro d4430d62fa [PATCH] beginning of methods conversion
To keep the size of changesets sane we split the switch by drivers;
to keep the damn thing bisectable we do the following:
	1) rename the affected methods, add ones with correct
prototypes, make (few) callers handle both.  That's this changeset.
	2) for each driver convert to new methods.  *ALL* drivers
are converted in this series.
	3) kill the old (renamed) methods.

Note that it _is_ a flagday; all in-tree drivers are converted and by the
end of this series no trace of old methods remain.  The only reason why
we do that this way is to keep the damn thing bisectable and allow per-driver
debugging if anything goes wrong.

New methods:
	open(bdev, mode)
	release(disk, mode)
	ioctl(bdev, mode, cmd, arg)		/* Called without BKL */
	compat_ioctl(bdev, mode, cmd, arg)
	locked_ioctl(bdev, mode, cmd, arg)	/* Called with BKL, legacy */

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:32 -04:00
Al Viro badf8082c3 [PATCH] switch ide_disk_ops ->ioctl() to sane prototype
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:30 -04:00
Al Viro 86d434dede [PATCH] eliminate use of ->f_flags in block methods
store needed information in f_mode

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:08 -04:00
Al Viro aeb5d72706 [PATCH] introduce fmode_t, do annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:06 -04:00
Bartlomiej Zolnierkiewicz 806f80a6fc ide: add generic ATA/ATAPI disk driver
* Add struct ide_disk_ops containing protocol specific methods.

* Add 'struct ide_disk_ops *' to ide_drive_t.

* Convert ide-{disk,floppy} drivers to use struct ide_disk_ops.

* Merge ide-{disk,floppy} drivers into generic ide-gd driver.

While at it:
- ide_disk_init_capacity() -> ide_disk_get_capacity()

Acked-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17 18:09:14 +02:00
Bartlomiej Zolnierkiewicz 79cb380397 ide: allow device drivers to specify per-device type /proc settings
Turn ide_driver_t's 'proc' field into ->proc_entries method
(and also 'settings' field into ->proc_devsets method).  Then
update all device drivers accordingly.

There should be no functional changes caused by this patch.

Acked-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17 18:09:13 +02:00
Bartlomiej Zolnierkiewicz cedd120cac ide-disk: use IDE_DFLAG_MEDIA_CHANGED
Set IDE_DFLAG_MEDIA_CHANGED in ide_gd_open() to signalize
ide_gd_media_changed() that that media has changed (instead
of relying on IDE_DFLAG_REMOVABLE).

There should be no functional changes caused by this patch.

Acked-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17 18:09:12 +02:00
Bartlomiej Zolnierkiewicz 5fef0e5c02 ide-disk: factor out generic disk handling code to ide-gd.c
While at it:
- IDEDISK_VERSION -> IDE_GD_VERSION
- ide_cacheflush_p() -> ide_disk_flush()
- init_idedisk_capacity() -> ide_disk_init_capacity()
- idedisk_set_doorlock() -> ide_disk_set_doorlock()
- idedisk_setup() -> ide_disk_setup()

- ide_disk_capacity() -> ide_gd_capacity()
- ide_disk_remove() -> ide_gd_remove()
- ide_disk_probe() -> ide_gd_probe()
- ide_disk_resume() -> ide_gd_resume()
- ide_device_shutdown() -> ide_gd_shutdown()
- idedisk_driver -> ide_gd_driver
- idedisk_open() -> ide_gd_open()
- idedisk_release() -> ide_gd_release()
- idedisk_getgeo() -> ide_gd_getgeo()
- idedisk_media_changed() -> ide_gd_media_changed()
- idedisk_revalidate_disk() -> ide_gd_revalidate_disk()
- idedisk_ops -> ide_gd_ops
- idedisk_init() -> ide_gd_init()
- idedisk_exit() -> ide_gd_exit()

There should be no functional changes caused by this patch.

Acked-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17 18:09:12 +02:00